Highland Woodworking Spring 2013 Catalog

Helping You Become a Better Woodworker est.

1978

HIGHLAND Woodworking

fine tools & education

800-241-6748

highlandwoodworking.com

Celebrating Highland’s

35 Years

of Service to Woodworkers

1978-2013

Come Celebrate With Us In Atlanta Saturday, April 27, 2013 And Meet Our Special Guest,

Roy Underhill Star of PBS Television’s The Woodwright’s Shop

Spring/Summer 2013

Highland Woodworking, a Highland Hardware company, has been serving the needs of woodworkers with tools & education since 1978.

1045 N. Highland Ave. NE, Atlanta, GA 30306

For a first-hand look at the thousands of items offered in our catalog (& many more), we invite you to visit our store. We’re about 3 miles from the heart of downtown & only a couple miles from the three local interstates.

Store hours are 9:00 - 6:00 Mon - Fri; 8:30 - 6:00 Sat; & 12:00 - 5:00 on Sun. We are closed on New Year’s Day, Easter Sunday, July 4th, Labor Day, Thanksgiving, & Christmas Day.

Guarantee

If for any reason you are not satisfied with any stock item* purchased from Highland Woodworking, you may return it to us postage prepaid within 60 days of receipt & we will promptly replace or refund the purchase price of that item, according to your preference. * For Festool product, the Manufacturer’s 30-Day Money Back Guarantee applies. Return the tool within 30 days for a refund of the purchase price of the tool. Freight charges are not refundable.

TO PLACE AN ORDER

Visa, MasterCard, Discover, & American Express users in all 50 states can order toll free. To assist us, please use our order form (pgs 37-38) to organize your order before placing your call. No C.O.D.

24-HOUR TOLL-FREE ORDERLINE (800) 241-6748 Metro Atlanta callers please dial (404) 872-4466 or use our secure server at

www.highlandwoodworking.com

Orders paid by charge card can be faxed (404) 876-1941

ACCU-RIGHT® CIRCLE CUTTER

The Accu-Right® Circle Cutter by Carter Products let you cut consistent and accurate circles with your bandsaw.

The extruded aluminum jig lets you cut circles from as small as 2” up to 4 feet in diameter (with proper side stock support). The jig clamps easily to most bandsaw tables & provides the ability to set a radius anywhere along the clearly marked tape readout. Simply mark the center of your circle diameter with a nail punch, slip onto the centering pin of the sliding pivot plate & you’re ready to cut a perfect circle.

189251 Accu-Right® Circle Cutter

AURIOU CHRIS PYE 7 PIECE CARVING TOOL SET Auriou, known for their exquisite hand-stitched carving & sculpting rasps, has consulted with Master Carver Chris Pye to create this new line of carving tools.

NEW!

The blades are forged by beating out a blank of steel to length before hammering the cross-section profile. This creates a very resilient grain structure in the metal which, when hardened to Rockwell 58C, underpins their great edge-holding properties. These gouges feel light in the hand and have corners more available for cutting due to their thin-walled cross section. OAL 9-3/4”.

124901 Auriou Chris Pye $299.99

7 Piece Carving Tool Set (includes 60° x 10mm (3/8”) V tool & #3 x 8mm (5/16”), #3 x 14mm (1/2”), #6 x 8mm (5/16”), #6 x 14mm (1/2”),

#9 x 8mm (5/16”) & #9 x 14mm (1/2”) gouges) Our fine Auriou Rasps & Rifflers are on page 39.

YOKI ONO JAPANESE AXES FOREST

NEW!

$79.99

The heads on these nicely crafted axes are made by laminating a softer, impact absorbing steel, that is less brittle & more durable, with a high-carbon content steel, that provides superior edge retention.

The long, tapered head on the Forest Axe is 8-1/4” long, with a 3-1/4” wide cutting edge, & will handle felling, limbing & light splitting. 35-1/2” OAL. The Splitting Axe’s head is 7-1/4” long, with a 2-3/4” wide cutting edge backed with a short taper giving more mass near the edge. 35” OAL. Heads for both axes weigh 3.7 lbs. Straight profile handles are Japanese white oak. (Note: The wedges in these axes protrude out a full inch and can be hammered in as needed should the head ever need tightening.)

125755 125758

SPLITTING

Japanese Forest Axe Japanese Splitting Axe

$219.99 $219.99

THE ANARCHIST’S TOOL CHEST by Chris Schwartz After much research, former Popular Woodworking Ed. Chris Schwarz made a list of the 48 hand tools that he considers essential. Streamlining his shop, he focused his efforts on fewer - but higher quality - tools. His journey is told with humor & personal insight. He covers tool chest design, with plans & instructions. Clothbound hardback. 475 pages.

204714 220702

The Anarchist’s Tool Chest $35.00 Inside the Anarchist’s Tool Chest, DVD Companion to the book, 55 minutes $12.00

Gift Certificates

Gift Certificates may be purchased in any denomination.

They may be redeemed for merchandise or classes at the store or by mail, phone, or internet.

Gift Certificates may not be redeemed for cash.

If you would like to be removed from our mailing list please call us at 1-800-241-6748 or email us at catalog@highlandwoodworking.com

Go to our website & sign up to receive Wood News, our FREE on-line monthly newsletter.

Class Schedule

Go to our website to see complete class descriptions, meeting specifics, required tool lists & to register. Or call us at 800-241-6748 to inquire about any class or to register for a class.

APRIL Class No. 6 9am-4:30pm Basic Bowl Turning 992519 $95 7 9am-4:30pm Basic Bowl Turning 992520 $95 13-14 9am-5pm Fundamentals of 992517 $265 Woodworking 13 10am-2pm Secrets of the Scott 992535 $80 Antique Show 17 5:30-8:30pm French Polishing 992527 $75 20 9am-4:30pm Beginning Turning 992521 $95 21 9am-4:30pm Turn a Peppermill 992522 $110 23 5:30-9pm Reinforced Miter Joints 992523 $75 24 5:30-8:30pm Sharpening for Turners 992524 $75 27 9am-4:30pm One-Day Sale with FREE Roy Underhill 28 9am-4:30pm Construct a Standing 992525 $125 Desk with Roy Underhill 30 5:30-8:30pm Hand Tool Sharpening 992526 $75 MAY 4 10am-4pm Hand Cut Dovetails 992528 $95 6-9 5-9pm Cabinet Making Basics 992529 $325 11 9am-4:30pm Basic Bowl Turning 992530 $95 15 5:30-8:30pm Taming the Skew 992531 $75 18 -19 9am-5pm Fundamentals of 992518 $265 Woodworking 25 9am-4:30pm Beginning Turning 992532 $95 28 5:30-8:30pm Hand Planes 992533 $75 29 5:30-8:30pm Finishing the Finish 992534 $75 JUNE 1 9am-5pm Cabinet Built-Ins 992536 $85 1-2 9am-5pm Antique Restoration 992537 $225 8 10am-4pm Chip Carving 992538 $95 8 10am-2pm Secrets of the Scott 992539 $80 Antique Show 9 1-4pm Shop Jigs 101 992562 $60 13 5:30-8:30pm Timber Framing 992540 $60 15 9am-4:30pm Basic Bowl Turning 992541 $95 15 10am-3pm Finishing 101 992561 $90 16 9am-4:30pm Basic Bowl Turning 992542 $95 19 5:30-8:30pm French Polishing 992543 $75 22 9am-5pm Beginning Character 992544 $95 Carving 23 12-5pm Bandsaw Basics 992545 $85 25 5-9pm Make a Marking Knife 992546 $85 29 9am-4:30pm Beginning Turning 992547 $95 29 10am-3pm Spray Finishing 992548 $80 30 9am-4:30pm Natural Edge Bowl 992549 $95 JULY 3 5:30-8:30pm Coloring Wood 992550 $75 6 10am-2pm Old Fashion Mortise 992551 $80 & Tenon 9-10 5-9pm Build a Bookcase 992552 $175 13 10am-4pm Table Saw Basics 992553 $85 17 5:30-8:30pm Sharpening for Turners 992554 $75 20 9am-4pm Hand Cut Dovetails 992555 $95 21 12:30-3:30pm Four Squaring Lumber 992556 $75 24 5:30-8:30pm Finishing the Finish 992557 $75 27 9am-4:30pm Turn a Peppermill 992558 $110 28 9am-4:30pm Basic Bowl Turning 992559 $95 AUGUST 3-4 9am-5pm Antique Restoration 992560 $225

Classes

Highland Woodworking One Day Sale Featuring Traditional Woodworking with Roy Underhill

Saturday, April 27 9am-4:30pm FREE - No registration required Roy Underhill, star of the long-running Woodwright’s Shop TV series, will be set-up for the day in the middle of our store for a FREE demonstration of traditional methods of woodworking for everyone in attendance.

Roy will be making shavings & magic using what he calls his carbon-neutral alcohol-powered reciprocating lathe for bowls & spindle turning. You may get a chance to try it yourself! See how to start with a tree & use traditional tools to make mechanical marvels of maple & persimmon! Don’t miss the opportunity to witness woodworking beyond the Norm!

Come join Roy Underhill, host of the PBS series “The Woodwright’s Shop” for a day of jocular joinery that could save your life! They tell us that sitting at a desk all day is a killer. The Constructing a answer? Stand at Standing Desk your standing with Roy Underhill desk! In this Sunday, April 28 992525 day-long 9am - 4:30pm Tuition: $125 adventure, Roy shows how to build a yellow pine Pennsylvania schoolmaster’s desk that reveals multiple mysteries of the joiner’s trade.

You’ll learn traditional table frame construction, dovetailing, moulding-making, as well as the elusive miter-ended-breadboard-bracket-clamped desktop! So have a seat in hand tool heaven, as Roy stands and delivers his Schoolmaster’s Desk. Plans and partial participation provided (and it will ALL be on the test!)

Teaching this fall at Highland Woodworking: (See our website for details.)

Jeff Miller, Designing & Building Chairs November 2 & 3 Mary May, Fundamentals of Woodcarving CLASS REGISTRATION

December 7 & 8

You may register for classes on our website (highlandwoodworking. com), by phone: 800-241-6748 (metro Atlanta callers please dial 404-872-4466) or by visiting the store. We accept MC, Visa, AmEx & DiscoverCard. A tool list, if required, may be viewed & printed from the class tab on our website. Highland Woodworking resverves the right to cancel any class. Refunds will be issued in that event.

Students withdrawing from a class must notify Highland Woodworking 10 or more days prior to the first day of class to receive a credit or refund. No refund or credit will be issued with less than 10 days’ notice. For labor intensive or multiple day courses, we reserve the right to issue special refund stipulations which will be disclosed on our website next to the specific class listing. 1

Featured Products

NEW!

6-1/2” KNEW CONCEPTS WOODWORKER'S ALUMINUM COPING SAW MADE IN weighs Knew Concept’s Coping saw uses an improved truss design that makes it exUSA 8.8 ozs. tremely rigid, incredibly light & very easy to handle. The blade can be rotated and locked in place in eight different 45° positions. The saw's Cam-Lever tensioning system allows the blade to be brought into tension instantly, while its knurled fine adjustment screw allows the tension to be set precisely where you want it. Saw uses standard 6-1/2” pin-end coping saw blades.

455307

Knew Concept Aluminum Coping Saw

KNEW CONCEPT SAWS INCLUDE A SINGLE 15 TPI BLADE

$149.00

KNEW CONCEPTS WOODWORKER’S TITANIUM BIRDCAGE FRET SAW Knew Concepts latest generation of fret saw, called the Titanium Birdcage Saw, has a horizontal frame member that is a welded titanium truss that’s triangular in cross section (thus cage-like). This creates an exceptionally strong & rigid frame for minimizing flex from blade tension so the taut blade can help you cut nice tight turns for all your intricate fret & scrolling work. weighs 6.75 ozs. The blade clamps lock at 45° left, 0°, & 45° right. A fine adjustment knob allows for precise tensioning, while a cam lever lets you instantly apply or release tension. Saws have a 3”, 5” or 8” depth of cut capacity, & use standard 5” pinless blades. Light, nimble & strong, these saws are sure to be a favorite of woodworkers, jewelry makers or hobbyists that need a fine cutting saw. weighs 6 ozs.

weighs 7.5 ozs.

455304 455305 455306

3” Titanium Birdcage Fret Saw 5” Titanium Birdcage Fret Saw 8” Titanium Birdcage Fret Saw

LIE-NIELSEN 610 LOW ANGLE JACK RABBET PLANE A hybrid of their bench rabbet plane NEW! & low angle jack plane.

This new plane provides a cutting blade that traverses the full width of the sole that is bedded in the 12°, lowangle style. The ductile iron body is 12-3/4” long x 2-1/8” wide and has cross-grain knickers on each side. It’s perfect for raising panels, cutting rabbets and full-scale joinery. Weighs 3.65 lbs.

134320

Lie-Nielsen 610 $245.00 Low Angle Jack Rabbet Plane

LIE-NIELSEN BRONZE 101 BLOCK PLANE

NEW

Also called a “Violin” plane

by Lie-Nielsen, this petite plane is perfect for all sorts of fine detail work.

Based on the vintage Stanley 101 block plane, this plane can trim small tenon faces, plugs & inlays, flush proud dovetails, as well as ease & chamfer crisp corner edges. Its 3-7/16” x 1-3/16” solid bronze body gets into places where a standard size block plane can’t. The A2 steel, 7/8” wide x 1/8” thick iron is bedded at 18°. The precise depth adjuster makes controlling the cutter flawless. 1/2 lb.

134182 Lie-Nielsen Bronze 101 Block Plane $95.00

$195.00 $215.00 $225.00

CARTER BEARING GUIDE CONVERSION KITS

MADE IN USA

Carter Bearing Guides are the industry standard upgrade for improving the blade guides on wood cutting bandsaws.

Their sealed, smooth running bearings reduce blade friction & improve cutting accuracy. The rear thrust bearing, with its outer circumference oriented to the back of the blade, guides more smoothly than running the blade back against the face of a thrust bearing, like on most saws.

Whether you’re upgrading an older block style guide system or wanting to upgrade the OEM roller guide bearings you already have, Carter Guides will let you get the most from your bandsaw.

189401 Carter Guide Conversion Kit Delta 14” $179.99 189403 Carter Guide Conv. Kit Delta 14” w/ Riser $199.99 189436 Carter Guide Conv. Kit Rikon 14” DLX (10-325) $179.99

CARTER STABILIZER The patented Carter Stabilizer Accessory is for cutting tight, complex radius curves. Its’ unique grooved bearing wheel prevents the blade shifting L&R or backwards, but permits the front of the blade to twist slightly side to side to negotiate tight curves. For use with 1/4” or narrower blades.

189470 Carter Stabilizer STD1 $79.99

(Most 14” saws w/ block guides) 189463 Carter Stabilizer RIK1 $79.99

(Rikon 10”, 14” & Sears 14” Pro) 189473 Carter Stabilizer STL1 (Steel City 14” saws) $79.99 189451 Carter Stabilizer CTR1 $79.99 (7/16” mount, fits into Carter Guide Conversion Kit for 14” saws) Call us for other sizes

EASY CHUCK by EASY WOOD TOOLS

After rocking the world of woodturning with his innovative Easy Wood Tools a few years ago, Craig Jackson of Easy Wood Tools has now done the same thing with his new Easy Chuck for wood turners.

Two super features for this chuck set it apart from other chucks. The first is a Zoom Ring (patent pending) that gives you the ability to open & close the chuck rapidly to get the jaws to lightly grab your project, then use the supplied chuck key for final tightening.

The second feature allows you to change jaws in less than 30 seconds. A supplied jam key depresses a latch in the jaw so the jaw slides right out & you simply slide & “snap” the next jaw in place. No tedious screws to fuss with when changing jaws. The safety corners on the jaw sets help reduce the chance of injury to your hands from the spinning jaws. Includes 1-3/8” Easy Dovetail jaws (expand to 2” with a jaw length of 7/16”), jaw key & chuck key. Made in the USA from hardened & corrosion-resistant steel. All Easy Chuck optional jaws have a smooth dovetail profile for maximum holding power.

NEW!

143601

2

EWT Easy Chuck (for lathes with 1”– 8tpi spindle)

$499.99

04

05 06 07 08

Optional Easy Chuck Dovetail Jaws JAW

09

GRIPS EXPANDS JAW (tenons) (recesses) LENGTH

143604 Std. Repl.

1-3/8” 2” 7/16” $59.99 up to 6” bowls 143605 Easy 2-3/8” 3” 7/16” $69.99 up to 12” bowls 143606 Easy Reach 1/2” 1-1/4” 1-1/4” $69.99 up to 5” bowls 143607 Easy Reach 1-3/8” 2” 1-1/4” $69.99 up to 6” bowls 143608 Easy Reach 3-1/2” 4-1/4” 1” $89.99 up to 24” bowls 143609 Easy Stepped 2-1/2”, 4-1/4” 1” $89.99 up to 20” bowls 3”, 3-1/2” 143602 EWT Easy Chuck $499.99

(lathes with 1-1/4”– 8tpi spindle)

ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Available May 2013.

Now taking pre-orders!

NEW!

FESTOOL TS 55 REQ PLUNGE SAW 561566 Leave it to Festool to improve upon what is already an amazing saw. The new TS 55 REQ model has a new exterior housing that provides a view window to the leading cutting edge of the blade and affords tighter, close-to-the-wall cutting. The blade tilt now goes from negative 1° to 47° & a blade depth scale lets you read the blade depth while on the guide track or sitting right on the material. A micro-adjust lets you fine tune the depth of cut, a retractable splitter now can extend into a previous saw kerf for blade alignment, while the improved splinter guard keeps your cuts clean.

You get the same powerful motor as the previous TS 55, unparalleled dust extraction with a vacuum connected and fast blade changes. The 48t blade cuts 1-15/16” at 90° and 1-7/16” at 45°. Includes a 55” guide rail & Systainer case. Weighs 9.9 lbs 720277

720278 720279 720280 720281 720282

Festool TS 55 REQ Plunge Saw 561566 TS 55 REQ w/ CT Mini Vacuum TS 55 REQ w/ CT Midi Vacuum TS 55 REQ w/CT26 Vacuum TS 55 REQ w/CT36 Vacuum TS 55 REQ w/ CT48 Vacuum

$585.00

$976.50 $1021.50 $1120.50 $1165.50 $1210.50

This spring get your Festool tools organized with the latest storage & mobility solutions from Festool.

Available May 2013 For the shop there is the updated Sys-Cart, with large 3-15/16” dia. locking casters, a wider base, 220 lb capacity, & locking latches to grip your stacked Systainer boxes.

For mobility beyond the shop, there is the lightweight (14.3 lbs.) Sys-Roll. This dolly will get your Festool Systainers transported over the toughest terrain. The locking latches & built-in strap will hold your stack of Systainers securely to the cart. Large non marring wheels (7-7/8” dia.) & stair climb-

Featured Products

FESTOOL TI 15 HYBRID IMPACT CORDLESS DRILL DRIVER

With Festool’s FastFix System, the Ti 15 is the only tool that can go from impact mode to high-speed drill, to right-angle drill, & back again in seconds!

NEW!

Building on a long history of brushless motor technology, the dual mode of Festool’s new Ti 15 impact driver allows you to effortlessly impact drive an 8 inch lag bolt into solid wood utilizing 2,400–3,600 BPM (blows per min.) via a sensor controlled impact mechanism & then easily switch over to a standard drilling mode. Variable speed up to 2,600 rpm with a 1/2” chuck capacity.

Built-in LED light illuminates the target area. Torque of 885 in. lbs. 3.75 lbs.

In the Festool Set Package you get the Ti 15 14.4V Cordless Lithium-Ion Hybrid Impact Drill/Driver, two 14.4V 3 Ah Lithium-Ion Batteries, Charger, Drill/Driver Adapter, Keyless Chuck, Centrotec Chuck, Centrotec Impact Bit Holder & SYS 1 Systainer.

However if you already own a Festool C-Series or TSeries cordless drill, you can purchase just the “Basic” version of the Ti 15 for significant savings. This comes without batteries or charger & includes the impact driver body, drill/driver adapter, & Centrotec impact bit holder along with a custom SYS 3 Systainer that has room for your existing Festool cordless drill & accessories. Battery Compatibility is 10.8V-15.0V Li Ion, NiCad, NiMH. Ti-15 is not compatible with CXS model drill.

722938 Festool Ti 15 Impact Drill/Driver $525.00

Set Package 722939 Festool Ti 15 Impact Drill/Driver Basic $350.00

ing wear strips assist you when pulling your tools up stairs. A built-in bottom drawer handles small parts storage on the fly. 220 lb capacity. XX” high.

The Sys-Toolbox is an open storage tote that latches easily to the top of your Systainers or Festool Dust Extractor, giving you quick access to your accessories & supplies.

721461 Festool Systainer SYS-Cart $85.00 721462 Festool Systainer SYS-Roll $175.00 721463 Festool Systainer SYS-Toolbox $49.00

STEEL CITY 40300HC 13” PORTABLE PLANER Patented cutter head design with Tungsten Carbide Cutters The 40300CH 13” portable planer has a 2” dia., helical-style head that uses 26 two-sided solid carbide indexed cutting inserts arranged in 6 rows around the cutter head, with the cutters in each row slightly offset from their adjacent rows. The resulting staggered cutting pattern means the knives cut with much reduced noise compared to conventional planer knives that NEW! beat relentlessly along the width of the workpiece thousands of times a minute. A nicked blade edge is remedied by simply rotating the insert to the fresh edge. Carbide cutters stay sharp longer & hold up well against species that quickly dull HSS edges. Max. stock thickness 6”. Dustport accepts 2-1/4” & 4” hose. 15 amp. 120V. 62 lbs. 2 year warranty. Ships within the lower 48 states for $24 surcharge.

160801

Steel City 40300HC 13” Portable Planer with Carbide Cutters

$499.99

These machines from Rikon offer tremendous power & capacity.

RIKON 16” THICKNESS PLANER 23-400 The Rikon 16” Thickness Planer’s 16” wide 3-knife cutter head rotates at 5100 rpm, providing 15,300 cuts per minute for an exceptionally smooth finish. Variable feed rate down to 16 FPM gives up to 80 cuts per inch. Max. depth of cut 1/8”. Plane stock up to 8-13/16” thick. 3HP 220V (needs 20 amp circuit). 4” dustport. 375 lbs.

Truck shipping charges apply. Contact us for a truck shipping quote.

191093 Rikon 16” Thickness Planer 23-400 $1499.99

12” RIKON PLANER/JOINTER 25-200 Converting from jointer to planer is quick & easy & the 12” wide 3 HSS knife cutter head provides 14,100 cuts per minute for an exceptionally smooth finish. Planer mills up stock up to 7-7/8” thick. Feed rate is 23 FPM. 3HP 220V motor. 392 lbs.

“Best Value” FWW Magazine April 2012

Truck shipping charges apply. Contact us for a truck shipping quote.

191061 12” Rikon Planer/Jointer 25-200 $1699.99 Both machines come WITHOUT a plug. You must supply one to match your 220V socket & install it on the cord. If you are not comfortable doing this, we recommend you hire a qualified electrician.

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS

3

Festool

NEW! FESTOOL CXS DRILL

Compact, lightweight, nimble & powerful, the CXS with its’ built in LED will light the way in tight spaces & handle jobs that larger drills can’t reach. The VS DC motor & 10.8V 1.3Ah Li-Ion battery provide 0-400 & 0-1200 rpms. Chuck capacity is 5/16” (8mm). Integrated belt clip & bit storage.

1.98 lbs. Includes Centrotec chuck, keyless chuck, 2 batteries, charger, magnetic bit holder, Phillips bit & Systainer case. CXS Set includes a right-angle chuck.

FESTOOL LITHIUM-ION BATTERY POWERED DRILLS

With innovative monitoring circuitry for the drill motor & lithium-ion batteries, Festool’s T+ cordless drills offer a 3 year warranty - including the batteries!

These dependable drills have VS brushless motors with built-in LED lights & a battery strength indicator gauge. Sensors on the electronic clutch disengage the motor (& make an audible signal) when 722913 Festool CXS Drill $245.00 the torque setting is reached. Slide a switch to change 722912 Festool CXS Drill Set $295.00 from a clutch drive setting to drilling mode, & then back again, while maintaining the original torque setting. Their exceptional balance makes all day use a pleasure.

The T drills have high energy Li-Ion batteries (3.0 Ah) with 0-450 & 0-1500 rpm. All models include 2 batteries & the TRC 3 charger. The T series drill sets include an eccentric chuck for getting up against sidewalls & a right angle chuck (both rotate at 22.5° increments), a Centrotec compact chuck, 1/2” keyless chuck, 4mm brad point bit, #2 Phillips bit, magnetic bit holder & Systainer case.

FESTOOL TRION JIGSAWS 722917 Festool T12+3 10.8V Drill Set $535.00 722919 722921

Festool T15+3 14.4 V Drill Set Festool T18+3 18V Drill Set

$585.00 $635.00

FESTOOL ETS 125EQ 5” RANDOM ORBIT SANDER The ETS 125EQ has a 1.6 amp motor with a 5/64” sanding stroke at 6,00014,000 rpm. A sanding brake keeps you from scratching the workpiece as you lower the sander onto the surface while the integral dust collection allows dust-free sanding. Includes Systainer case & a paper filter bag. 2.4 lbs.

720301 Festool ETS 125EQ 5” RO Sander

$185.00

It’s like using a hand held bandsaw!

3-way blade support & a patented carbide precision blade FESTOOL guide keeps blades straight & true even in thick materials. EVERY OTHER OUTPERFORMS PROFESSIONAL Saws have non-scratch bases, JIGSAW ON THE MARKET no tool blade changes, dust extraction and a splinter guard ensuring blowout free surfaces. 6 amp motors with electronic speed control have 1” stroke from 1000-2,900 spm. Includes 2 general purpose wood blades, splinter guard, chip guard, & Systainer case.

721206 721201

Trion D Handle Jigsaw (5.29 lbs) $265.00 Trion Barrel Handle Jigsaw (5 lbs) $265.00

FESTOOL ROTEX RO 90 MULTI-PURPOSE SANDER

The RO 90 DX could easily become the most versatile tool in your shop.

Festool’s RO 90 DX is the newest member of the dual-mode Rotex sanders that provide a random orbit mode for fine sanding & a rotary/RO mode for fast stock removal. The 1/2 HP VS motor gives speeds of 260-520 rpm in rotary mode & 3500-7000 rpm in RO mode. The 3-1/2” dia. pad lets DELTEX SHAPED 93MM H&L PAPER 3-1/2” H&L DISCS for RO 90 you sand in small spaces & is great RUBIN 2 BRILLIANT 2 BRILLIANT 2 RUBIN 2 for cabinet doors & face frames. Switch from Qty 50 Qty 100 Qty. 10 Qty. 50 Qty 50 Qty 100 Qty. 50 the circular pad to the included triangular GRIT $18.00 $28.00 $6.00 $18.00 GRIT $22.00 $33.00 $22.00 shaped pad in seconds (no tools required), 50 724389 724394 40 724026 724325 and you have a detail sander that gets into 80 720664 724390 724395 60 724027 724326 corners, without damaging adjacent surfaces.

100 720665 724391 724396 80 724028 724327 Connect a shop-vac to the dust port connec120 720666 724392 724397 100 724029 724328 tion for near dust free sanding. 1/8” orbital 720667 724398 120 724030 724329 stroke. 3.3 lbs. Includes Systainer storage case. 150 724001 Festool Rotex RO 90 Sander $395.00

FESTOOL SANDPAPER

Festool grades their abrasives to very tight tolerances that have less anomalies & more consistent cut patterns than other manufacturer’s sandpaper.

Rubin 2 abrasive is designed specifically for fast stock removal & for surface prep of raw wood & unfinished wood products like plywood, particleboard & MDF. Brilliant 2 is designed for sanding finished surfaces. Its coated abrasive resists clogging when sanding paint, varnish, lacquer & epoxies.

It can also be used to sand raw wood specially at finer grits like P220-P400.

180 220 320 400

720668 720669 720671 720672

724399 150 180 220 320

RUBIN 2 5” DISCS/ HOOK & LOOP for Rotex® Sanders Rubin 2 5” Discs Qty 10 $10.00 each GRIT 80 100 120 220 724343 724344 724345 724348 Rubin 2 5” Discs Qty 50 $28.00 each GRIT 40 50 80 100 724349 724350 724351 724352 GRIT 120 150 180 220 724353 724354 724355 724356

FESTOOL ROTEX® DUAL MODE SANDERS

724031 724330 724032 724331 724033 724332 724035

BRILLIANT 2 5” DISCS/ H&L for ETS 125EQ Sander Qty 10 Qty 50 Qty 100 GRIT $10.00 $28.00 $46.00 60 720329 80 720330 100 720331 120 720574 720332 150 720333 180 720575 720334 220 720335 320 720576 720336 400 720337

With their low weight, ergonomic design, dampened vibration & precision sanding ability, these sanders darn near make the chore of sanding pleasurable.

With VS electronic soft start motors & dual modes (RO mode for fine sanding & rotary/RO mode for fast stock reRotex® Sander 5” 125 FEQ 6” 150 FEQ moval), these sanders handle coarse 4.2 amps 6 amps sanding through fine polishing. A pad brake reduces scratching as Motor Rotary Motion 300-600 rpm 320-660 rpm you move the sander on & off your work. With a vacuum connected, the patented system of airflow on the sanding pad extracts Eccentric Motion 3000-6000 opm 3300-6800 opm 3/16” dust so well that abrasives work more efficiently & last longer. In- Sanding Stroke 9/64” Weight 4.4 lbs.

5 lbs. clude Systainer tool case & a 120X sanding disc.

720307 Festool Rotex 5” Dual Mode Sander $455.00 720776 Rotex 5” Sander with CT26 Vacuum $990.50

4

720383 Festool Rotex 6” Dual Mode Sander $545.00 720778 Rotex 6” Sander with CT26 Vacuum $1080.50

FREE GROUND SHIPPING ON ALL FESTOOL MACHINES IN LOWER 48 STATES

FREE GROUND SHIPPING ON ALL FESTOOL MACHINES IN LOWER 48 STATES

Festool

FESTOOL KAPEX KS120 10” SLIDING MITER COMPOUND SAW

The Kapex is the most accurate & versatile sliding compound miter saw available.

It’s unique “rail forward” design makes a compact, (24” x 28” footprint), lightweight (only 47 lbs.) & durable saw. The 1400-3400 rpm VS, 1600W, 13 amp motor powers the 10” (260 mm), 60T carbide-tipped blade. The cutting capacity at 90° is 12” x 3-1/2” & 8-7/16” x 3-7/16” at 45°. Miter cuts can be adjusted to the left up to 50° & to the right up to 60°. In addition, a special cutting position allows for cutting 3/4” material up to 4-11/16” high. The compound tilt mechanism moves smoothly & is perfectly balanced anywhere along the 47° left & 720234 Festool Kapex 10” $1375.00 Sliding Compound Miter Saw right swing. A micro-adjust knob dials in precise UG-Kapex Wheeled Stand $495.00 compound angle settings. Dual lasers clearly display 720268 Workpiece Clamp for Kapex $75.00 the cutting edges of the blade. Festool’s MiterFast an- 720243 Crown Stop for Kapex $95.00 gle transfer tool makes measuring & cutting angles 720241 MiterFast Transfer Tool $155.00 simple work. With a vacuum connected, the dust col- 720242 Festool 10” 80T Fine Blade $140.00 lection ability of the saw is astounding. The Kapex 720238 720239 Festool 10” 64T Laminate Blade $135.00 includes a 60T carbide blade, the MiterFast Transfer 720240 Festool 10” 68T Alum/Plastic Blade $135.00 Tool, a workpiece hold-down clamp & blade wrench. 720261 Kapex Saw with 26 Vac $1910.50 The optional UG Cart/Stand, made from steel tub- 720262 Kapex Saw with 36 Vac $1955.50 ing, transforms in seconds from a compact rolling cart The most innovative plunge routers you can find! into a sturdy saw stand for your Kapex.

FESTOOL PLUNGE ROUTERS 2200 FESTOOL DOMINO JOINERS Festool’s hand held power mortiser makes mortising fast, simple & accurate.

Domino Joiners use an DF 500 Q oscillating mill end bit to safely & accurately make mortises that accept floating tenon stock (called Dominos). Making strong mortise & tenon joints is now as easy as using a biscuit joiner.

With the DF 500 Q DOMINO TENONS (solid beech) Domino Joiner, you DF 500 Q $20.00 ea. can work with stock as 720145 4mm x 20mm (pk 450) narrow as 1” & 1/2” thick. With the option- 720128 5mm x 30mm (pk 300) al cutters, the DF 500 Q 720127 6mm x 40mm (pk 190) cuts mortises up to DF 500 Q & XL DF 700 $20.00 ea.

28mm deep handling 720126 8mm x 40mm (pk 130) tenon stock 4, 5, 6, 8 720125 8mm x 50mm (pk 100) &10mm thick. 7 lbs. 720124 10mm x 50mm (pk 85) XL DF 700

XL DF 700 $50.00 ea.

720160 8mm x 80mm (pk 190) 720161 8mm x 100mm (pk 150) 720162 10mm x 80mm (pk 150) 720163 10mm x 100mm (pk 120) 720164 12mm x 100mm (pk 100) 720165 12mm x 140mm (pk 90) 720166 14mm 100mm (pk 80) 720167 14mm x 140mm (pk 70)

With optional cutters for model XL DF 700, you can cut mortises up to 70mm deep handling tenon stock 8, 10, 12 & 14mm thick, letting you handle extra-large joinery projects. 11.4 lbs.

The Cross Stop jig for Domino Joiners lets you reference from your 1st mortise hole to make subsequent mortises that are perfectly spaced apart from 3-7/8” to 8-1/16”.

The Trim Stop for Domino Joiners safely & accurately holds narrow material 7/8” to 2-3/4” wide.

720141 Domino Joiner DF 500 Q $825.00

Includes 5mm Cutter & Systainer Case 720142 DF 500 Q Set w/Trim & Cross Stops $900.00 720111 DF 500 Q Cutters & Domino Assort. $285.00

5 Cutters (4, 5, 6, 8 & 10mm), assort. of 1060

Dominos & Systainer Case 720153 Domino Joiner XL DF 700 $1200.00

Includes 12mm Cutter, Dominos & Systainer Case 720152 XL DF 700 Set w/Trim & Cros Stops $1275.00 720154 XL DF 700 Cutters & Domino Assort. $275.00

8 & 10mm Cutters, assort. of 308 8mm & 10mm

Dominos & Systainer Case 720155 XL DF 700 Cutters & Domino Assort. $250.00

14mm Cutter, assort. of 128 12mm & 14mm

Dominos & Systainer Case 720110 Cross Stop for Domino Joiners $65.00 720109 Trim Stop for Domino Joiners $65.00 See our website for Sipo Tenons (African mahogany for rot resistance).

1400

1010

Festool’s VS routers (1-3/4, 2-1/4 & 3-1/2 HP) have flawless dust extraction ports, ratcheting collets for fast bit changes, straightforward depth settings & include a systainer storage case. Motors feature soft start, stepless speed adjustment, constant speed under load, & current & temperature overload protection. Their accurate depth plunge action can achieve tolerances to 1/256”.

720801 Festool OF 1010 EQ Plunge Router $410.00 (1-1/2HP, 8.5 amp & 5.9 lbs.)

Includes 1/4” & 8mm collets & template guide adaptor 720802 Festool OF 1400 EQ Plunge Router $510.00 (2-1/4HP, 11.7 amp & 9.9 lbs.)

Includes 1/4”, 1/2” & 8mm collets & template guide adaptor 721979 Festool OF 2200 EB Plunge Router $850.00 (3-1/2HP, 18 amp & 17.2 lbs. Includes 1/2” collet)

FESTOOL PLUNGE CUT SAWS Panel saw accuracy from a circular saw

The cutting accuracy of these saws far exceeds that of standard circular saws. Not only can you cut precisely on your measured mark every time, your cuts will be virtually splinter-free on both sides of your work. With a blade that safely retracts into the housing, you can start & end the cut accurately anywhere on the material. A built in retractable riving knife moves with the blade for added safety. The saw can tilt up to 45° while on the guide rail giving an astounding level of accuracy for bevel cuts. 10 amp soft start motors give constant speed under load. The TS 55 adjusts from 2,000-2,500 rpms & the 6-1/4” 48T blade cuts 1-15/16” at 90° & 1-7/16” at 45°. The TS 75 cuts at 1,350-3,550 rpms & has a 8-1/4” 36T carbide blade that cuts 2-3/4” at 90° & 2-1/8” at 45°. Connect a vac for unmatched dust collection in a circular saw. Saws include guide rail (55” with TS 55 & 75” with TS 75), splinterguard, limit stop & a Systainer storage case.

720201 TS 55 Plunge Cut Circular Saw (9.2lbs) $550.00 While supplies last - see the new TS 55 REQ on page 3.

720212 TS 75 Plunge Cut Circular Saw (13.6 lbs) $695.00 720259 TS 75 Saw with CT 26 Vacuum $1230.50 720208 TS 55 & TS 75 Splinterguard (5 pk) $20.00 721135 Parallel Guide $260.00 721136 Parallel Guide Extension $145.00 721154 Parallel Guide Extension Set $325.00 721122 Guide Rail Accessory Kit $200.00

GO TO HIGHLANDWOODWORKING.COM/FESTOOL TO SEE MORE FESTOOL PRODUCTS

5

Power Tools

5 YEAR

WARRANTY RIKON 10-305 10” BANDSAW Compact & well-made, this is an excellent starter saw for those on a limited budget & is useful to owners of larger bandsaws wanting to reduce the hassles of blade changes for separate cutting operations. 12-1/2” x 13-3/4” cast iron table. 4-5/8” high x 9-5/8” wide cutting capacity. 3/4” ball bearing blade guides keep blades running true. Uses blades up to 1/2” wide. (1/4” x 70-1/2” blade included.) 1/3HP 110V motor. Base is 15-3/4” x 9-1/4”. 32-1/2” high. 66 lbs. Ships within lower 48 states for $43 surcharge.

191042 191012

Rikon 10” Bandsaw Stand for Rikon 10-305 Bandsaw

WHILE $199.99 $299.99 SUPPLIES LAST $59.99

See our extensive selection of bandsaw blades on pages 54 & 55.

RIKON 10-345 18” BANDSAW Powered by a robust 2.5HP 220V induction motor, the Rikon 10-345 with its solid, cast iron wheels provides a 12” high x 18-3/8” wide 5 YEAR cutting capacity. The large 21” x 19” WARRANTY table tilts 45° right or 10° left. Easily switch speeds from 3220 to 1510 fpm. A quick-release blade tension lever allows easy blade changes & helps prolong the life of your bandsaw blades.

Double bearing blade guides provide blade stability & a smooth operating rack & pinion assembly allows quick up & down positioning of the guides.

Twin 4” dustports. 142” blade length. Blade width is 1/4” to 1-1/4”. Dimensions are 35-3/4” x 26-1/2” x 76”. Weighs 389 lbs.

WHILE Truck shipping charges apply.

SUPPLIES Contact us for a truck shipping quote, LAST 191019 Rikon 10-345 18” Bandsaw $999.99 $1499.99

SEE A VIDEO OF THIS AMAZING SAW IN ACTION ON OUR WEBSITE!

INCLUDES RIP FENCE!

$199.99

RIKON 10-325 14” DELUXE BANDSAW

A great choice for all kinds of woodworkers

Cutting Capacity: 13-5/8” wide x 13” high Cutting Speeds: 1445/2950 fpm 111” Blade Length & 1/8” – 3/4” Blade Width Table is 21-1/2” wide x 16” deep 5 YEAR Table Tilts up to 45° right or 5° left WARRANTY Size: 30” wide x 25” deep x 75” high 251 lbs, 4” Dust Port 24” wide x 17-1/2” deep footprint

Furniture makers will like the large 13” resawing capacity & cutting accuracy.

Woodturners will like the stability of the large table when roughing bowl blanks.

You can even cut non-ferrous metals on low speed. Powered by a 1-1/2HP 115/230V motor, (wired for 115V). A sturdy, extra rigid steel frame maintains accuracy.

Double bearing blade guides add stability & reduce friction for longer blade life. Quick-release lever releases blade tension. The large cast iron table tilts for beveled cuts & includes a heavy rip fence with integral inch scale & resawing pivot guide. Cabinet stand with door has a 16” x 18” x 14” storage area with shelf.

Truck shipping charges apply.

Contact us for a truck shipping quote, 191047 Rikon 10-325 14” Deluxe Bandsaw $799.99 $949.99

SAWSTOP TABLE SAWS - The safest table saws on the market!

The SawStop Safety system detects the touch of the human body to the spinning blade & stops the blade within 5 milliseconds, avoiding serious injury.

Along with the unparalleled safety & peace of mind that a SawStop provides, you’ll appreciate the assembly ease, unrivaled fit & finish, and the accurate cutting. SawStop is the obvious choice when upgrading your old saw or outfitting your shop with a tablesaw for the first time.

All SawStop saws are left-tilt style, 10” saws with a 4” dust port connector. The Contractor Saw offers greater mobility and like the 1.75HP Pro Cabinet Saw, runs on 110V. The 3HP Pro Cabinet saw runs on 220V. The Contractor saw comes with stamped steel table wings, while the Pro Cabinet saws have cast iron wings.

Three rip fence configurations are available. The most compact is the 30” rip capacity aluminum extrusion fence. The 36” & 52” rip capacity Overarm Dust Collector Attach. Professional T-Glide fences are rugged steel, Biesemeyer-like fences. The popular 36” size can handle cutting side panels on lower kitchen cabinets, yet still fits well into space challenged shops.

Pro Cabinet Saws (PCS) ship within the lower 48 states for $250.

SawStop mobile bases are the best we’ve 305040 1.75HP PCS w/30” Premium Fence 2299.00 ever encountered, coupling 305041 1.75HP PCS w/36” Pro T-Glide Fence $2469.00 ease of movement with rock 305042 1.75HP PCS w/52” Pro T-Glide Fence $2569.00 solid stability that puts 305022 3HP PCS w/36” Pro T-Glide Fence $2899.00 the saw fully on the floor, 305023 3HP PCS w/52” Pro T-Glide Fence $2999.00 not depending on locked wheels.

305024 Mobile Base (Pro Cabinet Saws) $199.99 Shipping charge per Contractor Saw is $150 to these states: AL AR CT DE FL GA IA IL IN KS KY LA MA MD ME MI MN MO MS NC ND NE NH NJ NY OH OK PA RI SC SD TN TX VA VT WV WI Shipping charge per Contractor Saw is $250 to these states: AZ CA CO ID MT NM NV OR UT WA WY 305001 Contractor Saw w/30” Aluminum Fence $1599.00 305002 Contractor Saw w/36” Pro T-Glide Fence $1799.00 305003 Contractor Saw w/52” Pro T-Glide Fence $1899.00 305008 Mobile Base (Contractor Saw) $160.00 305009 2 Cast Iron Wings (Contractor Saw) $189.99 305017 Jobsite Cart (Contractor Saw) $199.99

Ships within lower 48 states for $20 surcharge.

6

Ships within lower 48 states for $15 surcharge.

305046 Overarm Dust Collector Attachment $199.99

Ships within lower 48 states for $15 surcharge.

(Connects directly to the table blade guard on 3HP saws.

Connection to the Contractor & 1.75 Pro Cabinet Saw, also requires the Dust Collection Accessory Kit, below.)

305045 Dust Collection Accessory Kit $178.00 305012 Standard 10” Brake Cartridge (all models) $69.99 305013 Dado 8” Brake Cartridge (all models) $89.99 305027 Zero Clearance Insert - 8” Dados (all models) $39.99

Sawstop’s Industrial Cabinet Saws (ICS) are available for GA delivery. Call us or check our website.

ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

HIGHLAND WOODWORKING CAP This 100% cotton hat has a formed bill, a velcro closure & sports the Highland Woodworking plane logo on the crown. Comes in any color you want as long as it is black.

190121

Shop & Tool Accessories

Highland Logo Cap (one size fits all) $9.99

HIGHLAND WOODWORKING LOGO T-SHIRT Highland Woodworking Our athletic gray t-shirts are a Atlanta, GA heavyweight 90/10 cotton/poly blend with burgundy graphics.

Our logo is on the front chest pocket and a bold plane is on the back.

Fine Tools for Woodworkers

105080 Large T $15.99 105081 X-Large T $15.99 105082 XX-Large T $17.99

HEAVY DUTY 5-JAW HAND SHEAR This powerful shear cuts with a firm squeeze of the handles. Comes with replaceable jaws: V block, miter (graduated from 60° to 120°), straight/flat, 3/4� & 5/8�, and 1� fluted.

168052

5-Jaw Hand Shear (includes fitted case) $29.99

T-SHIRTS, MUGS & HATS

He who dies with the most tools wins He Who Dies These are ideal gifts for any The MWith ost Tools tool enthusiast or woodworker.

Win s Short sleeve shirts are heavyweight 100% pre-shrunk cotton with graphics on the back & H the Highland logo on the left front. e Who Dies Th With Shirts are black with white graphics. eM ost Tools Black 100% cotton hat has a formed Wins bib & velcro closure. One size fits all.

8 oz. white ceramic coffee mug has black graphics.

105504 105505 105506 105507 105509

“He who...� Large T-Shirt “He who...� X-Large T-Shirt “He who...� XX-Large T-Shirt “He who...� Hat “He who...� Coffee Mug

$15.99 $15.99 $17.99 $12.99 $7.99

GORILLA GRIPPER For gripping, lifting &

carrying large sheets of plywood, drywall, MDF, etc.

Two plates compress against the panel, gripping it with a force proportional to See the the weight of the material being lifted. Use video demo on panels 3/8� to 1-1/8� thick. Made in on our website.

USA from aircraft aluminum.

168551

Gorilla Gripper

$49.99

BRANDING IRONS These branding irons have a touch of flair. The simple curves & choice of images are a nice accompaniment for your branded name. They feature solid brass heads with clear capital letters 1/8� high & will permanently mark wood or leather. Available in electric (110v, 125w) or torch heat (that you supply) models.

The “Handcrafted By & Made in USA� series irons allow up to 20 characters, including spaces. Approximate image burn size is 3/4� x 2-1/2�. You can add an optional 2nd line of 20 characters &/or a bolt-on date head accessory to burn the calendar year below your brand. Includes changeable numbers to go from 2001 to 2043.

If you have lots to say, you can brand a custom message of up to 3 lines bordered within your choice of three frame styles: Scroll, Handsaw or Oval.

187251 Basic Arc Electric $119.99 Irons ship direct to you from manufacturer in approx. 3-4 weeks.

SCROLL 3 lines, 20 characters/line. 3/4� x 3�.

187260 Scroll Custom Electric $139.99 187261 Scroll Custom Torch $99.99 HANDSAW 3 lines, 15 characters/line. 1� x 3�.

187262 Handsaw Custom Electric $169.99 187263 Handsaw Custom Torch $129.99 OVAL 3 lines, 18 characters/line. 1� x 3�.

187264 Oval Custom Electric $169.99 187265 Oval Custom Torch $129.99

187252 187253 187254 187255 187256 187257 187258 187259 187266 187267

Basic Arc Torch $69.99 Extra Line for Basic Arc $15.00 Arc with Tools, Electric $129.99 Arc with Tools, Torch $84.99 Extra line for Arc w/Tools $15.00 Arc with Flags, Electric $129.99 Arc with Flags, Torch $84.99 Extra line for Arc w/Flags $15.00 Date Head, Electric $59.99 Date Head, Torch $59.99

SHOP SIGN WITH SAW HANGER Hang a shingle outside your Ole Shoppe with a custom cast sign.

This aluminum, double sided sign suspends from a symbolic handsaw that fastens to a wall with 2 screws. You can personalize the sign portion with up to 2 lines of 17 characters/spaces per line. For grandfathers, select the ready made “Grandpa’s Workshop� sign, or get the handsaw hanger & make your own sign to hang. (Both are regular stock items.) The sign itself measures 15� wide x 8� high x 7/16� thick. Overall dimensions, including the handsaw hanger, are 17� x 17�. The raised characters (all uppercase) are 1-1/4� high. The $99.99 sign background is powder coated brown with gold 198503 Custom Shop Sign w/Saw Hanger 198504 “Grandpa’s Workshop� Sign w/Saw Hanger $89.99 raised letters & the handsaw blade is pewter color.

198501 Saw Hanger Bracket Only (includes hooks) $26.99

Custom sign ships direct from manufacturer.

Please allow from 3 to 5 weeks for delivery.

$15.99

36-in-1 Automatic Stamp

168083

SIGNATURE MEDALLIONS These custom-made laser engraved

medallions can be inlaid into your

work for a unique personal touch. Ma-

chined from 3-ply 7/64� thick birch plywood, the medallions fit perfectly in a hole drilled with a 1� Forstner bit. Stain & finish as desired. Choose from ‘Handcrafted by’ or ‘From the Shop of’; your name (up to 18 characters including spaces). A $10 one-time setup fee applies to each style.

36-IN-1 AUTOMATIC LETTER STAMP Like an automatic center punch, this heavy brass tool delivers a sharp blow when simple hand pressure trips a spring release. Nosepiece socket holds any of 36 hex-shank punches. Includes letters A-Z (all caps, 3/16� high), numbers 0-9 and an ampersand (&). Vary impact to control depth. For wood & non-ferrous metals.

Comes in a compact wooden box.

Signature Medallions (lots of 25) $49.99 each 125203 Handcrafted w/Plane 125200 Handcrafted Blank 125202 Handcrafted w/Tree 125201 From the Shop Blank Go to our website to see more medallion styles.

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS

7

Shop & Tool Accessories LEATHER SHOP APRON

This luxurious apron gives you good coverage without restricting your movement.

Flaps over the lower 2 pockets keep out debris. Upper left pocket is divided for pens; upper right is the perfect size for a calculator or cell phone. Adjustable nylon straps cross-over in rear with speed buckle closure.

SHOP SMOCK 116401 Leather Shop Apron $59.99 Our ruby red, light weight nylon shop smock has a zipWOODTURNER’S pered front & open mesh under the LEATHER SHOP APRON Stretch fabric dust collar fits arms to keep you cool. Stretch fabric comfortably around the front of on the collar’s back fits snugly around your neck & 2 pockets located inyour neck to keep out debris. A large side the apron at the waist, won’t flap-covered shirt pocket in front has fill with chips. Adjustable nylon our logo & 2 pockets are on the back. straps cross over your upper back.

Shop Smocks $56.99 each Length from neck collar to bot199901 Small 199902 Medium tom is 38” & across the chest is Sized to fit over 199903 Large 199904 X-Large 21-1/2”. The coverage near the clothing, so “large” is actually “XL”. 199905 XXL arms is not restrictive. Twin pencil chest pocket.

116410 Leather Woodturner’s Shop Apron $79.99 RARE EARTH MAGNETS Small magnets serve as hidden KNOBS FOR JIGS & FIXTURES catches for cabinet doors & lids.

THREAD T-Knobs $1.25 each Large sizes hold jigs & fixtures & keep your tool accesSIZE Insert Stud (1” long) sories home. Keep away from electronic media & children.

1/4”-20 485601 2” wide 485604 1-7/16” wide 5/16”-18 485602 2” wide 485605 2” wide 3/8”-16 485603 2” wide Ratchet Levers $3.99 each 1/4”-20 485619 1-7/8” arm 485622 1-7/8” arm 5/16”-18 485620 2-7/8” arm 485623 2-7/8” arm 3/8”-16* 485621 3-5/8” arm 485624 3-5/8” arm Star Knobs $1.25 each 1/4”-20 485613 2-3/8” dia. 485616 2-3/8” dia.

5/16”-18 485614 2-3/8” dia. 485617 2-3/8” dia.

3/8”-16 485615 2-3/8” dia. 485618 2-3/8” dia.

Ball Knobs $1.99 each 1/4”-20 485625 1-1/16”dia.

5/16”-18 485626 1-1/2” dia.

1-1/4” long stud 3/8”-16 485627 1-3/8” dia. *

485651 485652 192201 485653 192202 192211 192212 192213 192214

1/4” x 1/8” Disc 2.7 lbs. pull (10 pk) $8.99 3/8” x 1/8” Disc 4 lbs. pull (10 pk) $9.99 1/2” x 1/8” Disc 5.3 lbs. pull (10 pk) $12.99 3/4” x 1/8” Disc 8 lbs. pull (6 pk) $13.99 1” x 1/8” Disc 10.7 lbs. pull (4 pk) $14.99 1/4” x 1/4” x 1/8” Block 2.4 lbs. pull (10 pk) $8.99 1/2” x 1/2” x 1/8” Block 6 lbs. pull (10 pk) $13.99 3/4” x 3/4” x 1/8” Block 9.1 lbs. pull (6 pk) $14.99 1” x 1” x 1/8” Block 12 lbs. pull (4 pk) $16.99

RARE EARTH MAGNETS ARE SUBJECT TO MARKET PRICING CONDITIONS.

24” & 36” LONG T-SLOT TRACK 3/4” x 3/8” extruded aluminum track accepts the head of standard 1/4-20 bolts to let you attach stops & accessories anywhere along its length.

172724 24” Track $7.50 172725 36” Track $9.99

KREG EXTRUDED ALUMINUM T-SLOTTED TRAK Available in four sizes track with a T-slot for feather boards or Kreg’s Heavy-Duty Trak is an L-shaped, hard anodized aluminum extrusion with 5 Thold-downs 1-5/8” wide x 9/16” high. slots which accommodate the head of a Cut to length with a hacksaw.

1/4” bolt. 1-3/8” wide x 2-5/8” high, 124012 24” Kreg Heavy-Duty Trak $42.99 the shape of the track allows enormous flex124013 48” Kreg Heavy-Duty Trak $66.99 ibility when locating & mounting the track 124021 24” Kreg Top Trak $24.99 124022 48” Kreg Top Trak $38.99 on the machines in your shop. One face has 124046 24” Kreg Mini Trak $14.99 an indentation for a 1/2” wide self-adhesive rule.

36” Kreg Mini Trak $17.99 Kreg’s Top Trak, (1-5/16” wide x 1-1/8” 124047 48” Kreg Mini Trak $21.99 high), mounts to the top edge of a 3/4” 124048 32” Kreg Combo Trak $33.99 shop-made fence. A self-aligning, L-shaped 124044 48” Kreg Combo Trak $43.99 mounting foot makes it easy to install. The 124045 124008 Kreg Swing Stop $33.99 top is recessed for 1/2” wide self-adhesive rule.

124016 Kreg Solid Production Stop $22.99 The petite Mini Trak, (3/4” x 3/8”), can be 124017 Kreg Perfect Miter Attachment $21.99 dadoed into fence faces, table surfaces, jigs, 124101 Left to Right 12’ Self Stick Rule $8.99 or anywhere you need a recessed T-slot. It’s drilled & 124100 Right to Left 12’ Self Stick Rule $8.99 countersunk on 4” centers. Cuts with a hacksaw.

124010 24” Kreg Miter Gauge Fence $59.99 Combo Trak has a 3/4” x 3/8” standard miter guide includes 24” HD Trak, Precision Flipstop & 1/2” self stick rule POWER-TWIST™ DRIVE BELTS & MACHINED STEEL PULLEYS Better, smoother cuts & more usable power Unevenly made V-belts & unbalanced, unevenly cast pulleys are the main source of vibration in many stationary tools. Reduce vibration by up to 80% in your bandsaw, contractor’s saw, drill press, jointer or lathe with Power-Twist™ drive belts & accurately machined pulleys. Belts fit 1/2” pulley width.

Install in seconds with no tools. Just measure your belt length & pulley sizes (i.d & o.d.) & give us a call.

485401 485411 485412

8

Power-Twist Belt, per foot $9.99 Steel Pulley (i.d. 5/8”, o.d. 2-1/4”) $14.99 Steel Pulley (i.d. 5/8”, o.d. 2-1/2”) $14.99

MAGNETIC TOOL HOLDERS These handsome tool holders have powerful twin magnets with 4 contact rails to hold chisels, wrenches, & other tools. 12” size has 30 lb. holding power. Finished wood bodies are 1-3/4” high x 7/8” x 12”, or 24” long.

Heavy Duty models with 40 lb. holding power have all metal bodies 3/4” high x 1” deep & excel at holding heavier round-shanked items.

185201 185203 185204 185205

12” Magnetic Tool Holder 24” Magnetic Tool Holder 13” HD Magnetic Tool Holder 24” HD Magnetic Tool Holder

$7.99 $14.99 $14.99 $19.99

OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

150 lb HEAVY DUTY CASTERS LOAD Double brake stops CAPACITY rolling & swiveling These 3” casters are great for mobilizing machines or fixtures in the shop. Swivel models have a built-in locking lever. One has a 1-1/4” long mounting stud with standard metric thread, 12mm x 1.75 pitch; stud fits 1/2” hole; the other has a 2-1/2” square mounting plate. Fixed caster’s mounting plate is 2-3/4” x 2-3/8”.

484012 484050 184050

3” Locking Swivel Caster with Stud $8.50 3” Locking Swivel Caster with Plate $8.50 3” Fixed Caster with Plate $4.99

LAZY SUSAN BEARINGS Heavy steel turn-tables with ball bearing construction are handy for corner cabinets, display cases & spray booth pedestals.

188111 188112 188113 188114 188115

3” Square Lazy Susan (up to 18” & 200 lbs.)

4” Square Lazy Susan (12” - 25” & 300 lbs.)

6” Square Lazy Susan (15” - 30” & 500 lbs.)

9” Round Lazy Susan (18” - 35” & 750 lbs.)

12” Round Lazy Susan (to 20” & 1000 lbs.)

$2.99 $3.49 $5.49 $9.99 $13.99

BALL BEARING WORK SUPPORTS These 1” hardened bearings mounted in flanged steel housings with screw holes let you make your own low-friction outfeed support wherever you need to move heavy work easily.

485661

Ball Bearing Work Supports, Pk of 6 $16.99

Shop & Tool Accessories

STEEL CITY UNIVERSAL MOBILE BASE The easiest universal mobile base we’ve ever used.

Measure your machine’s base, cut a piece of 3/4” plywood 1/2” larger in each dimension than your machine’s measurements & bolt on the 4 corners. Accommodates from 12” x 12” to 37” x 37” up to 600 lbs.

801000

Steel City Universal Mobile Base

$59.99

123033

Digital Pin-Pad Moisture Meter

$99.99

GENERAL MMH800 DIGITAL PIN-PAD MOISTURE METER This 4-in-1 digital meter measures moisture in wood or building materials. Pins provide greater accuracy, while the pad sensor measures the surface moisture of materials.

The unit also provides a constant display of the ambient temperature (in C or F) & relative humidity. The detection range for wood moisture is 5 - 50% & building materials 1.5 - 33%, (accuracy is ±3%). Easy to read display shows 5/8” tall numerals. The included pin cover cap also functions as a meter calibration tool. Auto power off feature saves battery life. Includes 2 pairs of test pins (10mm & 15mm long), a hard plastic case with foam interior, & 9V battery. 1 year warranty.

LIE-NIELSEN DOWEL PLATE This simple, old-fashioned tool lets you make your own dowels in any kind of wood, in 7 sizes. Though it’s a simple tool, it’s Lie-Nielsen; the plate is milled from A2 tool steel hardened & tempered to Rc60, with 2 mounting screw holes.

434293 134094 134009

Lie-Nielsen Dowel Plate (1/8, 3/16, 1/4, 5/16, 3/8, 1/2 & 5/8”) $55.00 L-N Metric Dowel Plate (3, 4, 6, 8, 10, 12 & 16mm) $55.00 Leather Case for L-N Dowel Plate $15.00

DOWEL POINTER This old-fashioned wooden handled tool progressively shaves a pointed end on dowels up to 1” in dia. Blade removes for sharpening.

168012

Dowel Pointer

$12.99

168011

3-Piece Dowel Baller Set

$24.99

DOWEL BALLER SET These unique tools round the end of 1/2”, 3/4” & 1” dia. dowels to a perfect hemisphere with a few turns. Use a slipstone or file stone to resharpen the quarter-round blade.

ROUNDERS These pencil sharpener like tools shave the ends of dowels, spindles & square stock to perfect rounds. They’re ideal for making round tenons, & for dimensioning stock for cutting wooden screw threads.

168009 Set of 3 Rounders (1/2, 3/4 & 1” cylinders) $24.99

MITER TRIMMER A must-have for picture framers or anyone seeking the perfect miter joint. A massive cast iron body & positive, adjustable angle stops hold stock securely at any angle from 45° to 90°. Razor sharp thick steel knives are skewed to shear & hold the stock down during the cut. A long cast iron handle gives you tremendous leverage; rack & pinion gears make the cut smooth & controlled. Accommodates stock 4” thick x 6” wide. Trims a 1 x 6 at 90° & a 2 x 4 at 45°. Optional top trim attachment cuts a 45° bevel (rather than a miter); measuring attachment lets you precisely repeat lengths from 4” to 28”. 30 lbs.

168034 168035 168036 168037

Miter Trimmer Repl. Knife Set Top Trim Attachment Measuring Attachment

$199.99 $74.99 $25.99 $39.99

MANUAL WOOD THREADERS These classic thread box & tap sets produce screws & matching nuts.

Slip the thread box on the end of a dowel & rotate clockwise to cut crisp, sharp threads. If the wood tends to tear, a thorough wipe with mineral oil will solve the problem. Two taps come with each kit, one for starting & through cutting and the other a bottoming tap for blind holes. Both tap & die cutter are easily resharpened when needed.

477711 477712 477713 477715 477716 477714

1/2” Manual Wood Threader (~8 tpi) 3/4” Manual Wood Threader (~6 tpi) 1” Manual Wood Threader (~6 tpi) 1-1/4” Manual Wood Threader (~6 tpi) 1-1/2” Manual Wood Threader (~6 tpi) Repl. Cutter for Threaders

$46.99 $49.99 $52.99 $54.99 $59.99 $9.99

SHOP DUST PANS The big pan weighs 24 oz., is 17” wide, 10” deep, with 2” side-walls. The medium pan weighs 8 oz., is 11-1/2” wide, 7” deep & has 1-1/2” side-walls. Both sit flat on the floor without having to be held.

486041 486044

Big Shop Dust Pan Medium Shop Dust Pan

$15.99 $10.99

BENCH BRUSH Long, soft, horsehair bristles sweep dust away without burnishing or marking the softest surface or finest finish. Bristle head is 3” x 8”. Maple handle.

185101 Horsehair Bench Brush (OAL 13-1/2”)

$13.99

TRUE-FLEX FEATHERBOARDS These fit into any 3/8” x 3/4” miter slot on your machines & include hardware for fitting T-slots.

Tough 4” plastic fingers are 2-3/8” deep. Reversible for both feed directions.

124309 Kreg True-FLEX Featherboard $19.99 124310 Twin Pack True-FLEX Featherboards $36.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM

9

Sharpening Stones Waterstones

Waterstones cut very quickly, offer a large range of grit sizes, & are pleasantly affordable. The waterstones we offer are man-made; their abrasive is sieved for accurate grit size & freedom from impurities, and the bonding process is carefully controlled to ensure consistently reliable performance.

A Highland Woodworking waterstone user’s guide, in PDF format, is available from our website. Click on the Library tab on our homepage to view & print.

ICE BEAR 10,000X WATERSTONE

Hones & polishes tools to a mirror shine Use it like other polishing stones – splash on some water, work up a paste with the nagura stone, (included), & go to work. For the finest possible polish, let the stones’s surface “run dry” for the last few strokes. Comes mounted on a wood base.

146701

10,000X Waterstone (1” x 3” x 8-1/8”)

$89.99

STANDARD WATERSTONES 426401 426402 426403 426405 426404 426407 426445

800 (2-1/2" x 8" x 1-1/4") $27.99 1000 (2-1/2" x 8" x 1-1/4") $24.99 1200 (2-1/2" x 8" x 1-1/4") $25.99 4000 (2-1/2" x 7-1/4" x 1/2") $26.99 6000 (2-1/2" x 7-1/4" x 1/2") $28.99 8000 (2-1/2" x 7-1/4" x 1/2") $49.99 Economy Set of 3 Stones $89.99 Green (200), 1000, & 6000 426446 Comprehensive Set of 5 $169.99 Green (200), 800, 1200, 4000, 8000 & Nagura

NAGURA STONE Nagura stones are used for cleaning & flattening 4000, 6000 & 8000X finishing waterstones before & during use, & for creating a slurry of loose grit; the source of the stones’ unique polishing properties. May be soaked before use.

426425

426427 426428 426429 146702

Nagura Stone

$6.50

COMBINATION WATERSTONES These stones are an excellent value for general utility work, & are ideal for job-site work on edge tools.

250/1000X Small(1-1/4” x 1-1/4” x 5-1/4”) 250/1000X Medium (2” x 1” x 8”) 1000/6000X Medium (2” x 1” x 8”) 1000/6000X Large (2-3/4” x 2” x 8”)

$13.99 $22.99 $31.99 $66.99

GREEN COARSE STONE This extra-coarse 200X silicon carbide stone cuts so fast you can use it in place of a bench grinder to grind your chisels & plane irons. Large enough to provide 4 working surfaces & years of use.

426420

Green Coarse Stone (3-1/8” x 8-1/4” x 2-1/8”)

$49.99

GREEN BLADE HONING COMPOUND This 6.5 oz stick of aluminum oxide compound buffs steel, brass, chrome, or stainless to a mirror shine. It’s ideal for polishing plane irons & soles and chisel backs.

427012

Green Blade Honing Compound

$9.99

For carvers & turners who prefer a cone-shaped stone for sharpening gouges; handy whenever it's easier to take a WATERSTONE stone to the tool rather than GOUGE SLIPS vice versa. 6” x 2” x 3/8”.

426441 426442 426443 426444

180X Gouge Slip 1000X Gouge Slip 4000X Gouge Slip Set of 3 Gouge Slips

$36.99 $29.99 $34.99 $89.99

JAPANESE SLIPSTONES Slip-stones will hone & polish specialty plane irons, carving & turning tools. Use slipstones when it's easier to move a small stone than a large tool. 2” x 4”. Use Mini-Slipstones for even harder-to-reach cutting edges. 1” x 2-1/2”.

426431 426421 426422 426423 426438 426451 426454 426458 426460

180X Slipstone 1000X Slipstone 4000X Slipstone 8000X Slipstone Set of 4 Slipstones 1000X Mini Slipstone 4000X Mini Slipstone 8000X Mini Slipstone Set of 3 Mini Slipstones

$14.99 $12.99 $14.99 $24.99 $54.99 $5.99 $5.99 $6.99 $16.99

VERITAS STONE POND This clever device is both storage tray & work station for your waterstones.

The 8-1/2” x 12” tough ABS stones pond has room to store 3 or not included more full-size waterstones in water. Two support rails with quick-action stops set up 2 stones at once for fast, convenient sharpening. Includes an 8-1/2” x 14-1/4” tempered glass pane to use as a stone flattening plate.

427001

Veritas Deluxe Stone Pond

$74.99

WATERSTONE HOLDER Heavy rubber blocks hold stones from 1-1/2” to 9” long with excellent traction on any surface.

The end block adjusts easily on smooth, chrome-plated steel rods, while its tight fit resists fouling with sharpening debris.

426461

Waterstone Holder

$14.99

NORTON WATERSTONES We’ve found Norton stones work just as remarkably as their Japanese counterparts.

They wear a little tougher in general, & require less frequent flattening. 8” x 3” x 1”.

Stones come in a nonskid, plastic storage case.

156611 156612 156613 156614 156610 156615 156616 156617 156618 220527

Norton 200X Green Stone $27.99 Norton 1000X Waterstone $46.99 Norton 4000X Waterstone $64.99 Norton 8000X Waterstone $93.99 Set of 4 Norton Waterstones $219.99 (200, 1000, 4000, & 8000X) 220X/1000X Combination Stone $37.99 1000X/4000X Combination Stone $59.99 4000X/8000X Combination Stone $83.99 1000X/8000X Combination Stone $71.99 Norton Watersone Sharpening DVD $11.99

NORTON WATERSTONE STARTER KIT A good value for beginners

This kit includes Norton’s 220/1000X & 4000/8000X combination stones, their flattening stone & a DVD on sharpening. We recommend adding a nagura stone to dress the 4000/8000 stone.

156622

Norton Waterstone Starter Kit

$139.99

NORTON FLATTENING STONE This coarse silicon carbide flattening stone trues all makes & grits of waterstones. Just pencil a grid pattern on the stone you wish to flatten & rub it over the flattening stone until the lines disappear. Diagonal grooves cut across its surface drain away water & waste grit. Includes instructions & clear plastic case.

156620 Norton Flattening Stone (9” x 3” x 3/4”) $27.99

10 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

DMT DUOSHARP™ TWO SIDED DIAMOND STONES These luxuriously large stones have economical double-sided construction. 8” x 2-5/8” stones are great for all your woodworking tools; 10” x 4” stones are superb for plane irons, scrapers, & long edge tools like chef’s knifes. An optional base with non-skid feet elevates either stone for unobstructed access.

425380 425381 425385 425386 425384

8” Extra Coarse/Coarse Duo-Sharp $89.99 8” Fine/Extra-Fine Duo-Sharp $89.99 10” Extra Coarse/Coarse Duo-Sharp $129.99 10” Fine/Extra-Fine Duo-Sharp $129.99 DuoSharp Base for 8” & 10” Stones $16.99

DMT DOUBLE SIDED DIAFOLD® PADDLES These handy 7/8” x 4-3/8” x 1/4” paddles self-store in their own folding handles, which snap open to make a stable, rigid 5” handhold.

448009 448010 448011

Extra Coarse/Coarse Double Diafold $36.99 Coarse/Fine Double Diafold Paddle $36.99 Fine/Extra Fine Double Diafold Paddle $36.99

DMT 6” BENCH STONES Use these 6” x 2”x 3/4” stones on plane irons, chisels, knives & carving tools.

They also can be hand held for sharpening larger tools. They include a plastic dust cover & snap-on plastic base with non-skid feet & keyholes to secure it at a sharpening workstation.

448018 448019 448020 448021

Extra-Coarse 6” Bench Stone Coarse 6” Bench Stone Fine 6” Bench Stone Extra-Fine 6” Bench Stone

$42.99 $42.99 $42.99 $42.99

Sharpening Stones Diamond Stones

Man-made diamonds bonded to a hard, rustless surface provide abrasive that is harder than any other material, is extremely sharp, & capable of lasting almost indefinitely. Use diamond stones to sharpen or lap almost anything, from tool steel to carbides to glass & ceramics (including ceramic stones). Whenever practical, wetting the stones with water or light oil will virtually eliminate clogging while you work, but they can be used dry as well.

DMT X-EXTRA-FINE DIA-SHARP DIAMOND STONE Diamond stone fans will now be able to hone a fine edge on their tools without switching abrasive types.

The 3-micron grading makes this stone similar in performance to a hard Arkansas, a 6000X waterstone or an extra-fine ceramic stone. The mono-crystalline diamond abrasive is bonded to a solid steel plate 8” x 3” x 3/8” thick. Because it won’t chip, crack or dish out, it may well be the ultimate job site toolbox stone.

125531

448042 448043 448044

$5.99 $5.99 $7.99 $8.99 $9.99 $24.99 $34.99

DIAMOND STONES C These 1” x 3” x 1/4” thick diamondcoated blocks work particularly well for in-place honing of jointer & planer knives. A small groove in the center of the stone is for sharpening fish hooks.

425322 425305 425306 425307 425308 425332

1200X Super Fine $7.99 600X Fine $7.99 400X Medium $9.99 250X Coarse $11.99 150X Extra Coarse $16.99 Set of 4 Small Stones (C, M, F, SF) $39.99

LEATHER STROP This 10” x 1-7/8” double-sided leather strop gives ample room for honTo avoid ing a final polish onto your cutting into the cutting edges. The leathleather, be certain the er is glued to a 3/4” thick cutting edge is the trailing edge wooden block that has a as you pull a blade across a strop.

4-1/2” turned wooden handle.

116424

Leather Band Strop

$14.99

LEATHER BELT STROP This 22” x 2-1/2” x 1/16” thick piece of leather has a smooth side & one with rough texture. A steel grommet allows hanging for storage.

Condition the leather with a few drops of oil & charge the strop with honing compound for best results.

116414

Leather Belt Strop

$14.99

$89.99

Coarse (325X) X-Large Dia-Sharp $74.99 Fine (600X) X-Large Dia-Sharp $74.99 Extra-Fine (1200X) X-Large Dia-Sharp $74.99

EZE-LAP DIAMOND NEEDLE FILES These 5-1/2” long needle files are especially useful for shaping & sharpening tools, drill bits or very small router bits. Sets have round, square, triangle, half-round, flat, & knife-blade, each with plastic-coated tang.

EZE-LAP DIAMOND PADDLES These are perfect for touch-up honing of router bits, shaper cutters & drilling tools. Light weight & small size make them handy for jobs where bigger stones are hard to handle or won’t fit. Diamondcoated surface is 3/4” x 2” on a 6” plastic paddle.

425321 1200X Super Fine 425301 600X Fine 425302 400X Medium 425303 250X Coarse 425304 150X Extra Coarse 425331 Set of 4 Paddles (C, M, F, SF) 125507 Set of 5 Paddles (XC, C, M, F, SF) D C EZE-LAP SMALL

DMT 8” X-Extra-Fine Dia-Sharp

DMT EXTRA LARGE DIAMOND STONES These Dia-Sharp stones are 11-1/2” x 2-1/2” on 3/8” solid steel plates with non-skid rubber feet. The monocrystalline diamond abrasive is bonded to the solid steel plate without DMT’s standard plastic base & hole pattern, giving you 30% more abrasive to work on. They make superb lapping plates.

425314 425315

600X Fine Set 200X Coarse Set

$35.99 $39.99

EZE-LAP DIAMOND KNIFE ROD This medium grit rod has a reversible brass handle/ case. It does a fine job sharpening knives, even serrated & electric knife blades. Chucked in a drill, it’s perfect for sharpening bits or odd shaped edges.

425313

Diamond Knife Rod (4” x 14”) $21.99

425341 425342 425343 425344 425346 425340

1200X Super Fine Large $36.99 600X Fine Large $36.99 400X Medium Large $44.99 250X Coarse Large $52.99 150X Extra Coarse $74.99 Set of 4 Large Stones (C, M, F, SF) $159.99

D EZE-LAP LARGE DIAMOND STONES These large 2” x 8” x 1/4” flat diamond stones are ideal for fast general-purpose sharpening.

Ceramic Stones

These smooth cutting, long wearing, fused-alumina ceramic stones are a favorite for carvers. Use dry or with water. When surfaces get clogged with debris, scrub the stone with an abrasive cleaner & water.

FINE CERAMIC FILES Set of 4 files, 1/4” x 5” long in custom leather pouch with snap flap (round, square, triangle 400F

302M 302F 302UF 302S

Set of 4 Ceramic Files $59.99

& slip).

BOXED CERAMIC STONES

Medium (800X, 2” x 8” x 1/2”) Fine (1200X, 2” x 8” x 1/2”) Ultra-Fine (1800X, 2” x 8” x 1/2”) Set of 3 Boxed Ceramic Stones

$59.99 $59.99 $79.99 $179.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 11

Sharpening Tools

POWER STROP

DMT DELUXE ALIGNER SHARPENER KIT DMT’s Knife Aligner Kit is a simple jig that makes accurate knife sharpening a snap. Works with any knife blade up to 1/8” thick. Includes three 4” diamond stones (C,F & XF), a file for serrated edges and a fabric carrying pouch.

448032

DMT Deluxe Aligner Sharpener Kit

$56.99

GRINDING WHEEL DRESSING STONE This silicon carbide stone does a fast, effective job of shaping, truing, & de-glazing all kinds of grinding stones. Always use eye protection when using dressing stones!

425002

Dressing Stone (1” square x 6” long) $8.99

NORTON DIAMOND WHEEL DRESSER This wheel dresser has approximately 20 industrial diamonds randomly imbedded in a 3/4” x 1/4” head. It will deglaze, shape & true any grinding wheel. 10” long with a plastic handle. Be sure the wheel dresser is supported by your grinder’s tool rest before contacting the spinning wheel.

With a light touch, move the dressing tool back & forth across the stone’s face.

159005

Norton Diamond Wheel Dresser

$41.99

WORK SHARP 3000 SHARPENING CENTER

Deluxe Drill Mounted Leather Honing Kit A fast & affordable way to strop a razor edge on carving tools, knives, scissors or any other cutting tool. The Deluxe Kit includes two 3-1/2” leather wheels (one 3/4” wide, & one V-shaped for use on V-gouges & other narrow tools), two 1/4” arbors for mounting in a drill or drill press (max. 600 rpm), & polishing compound.

427011

Power Strop Kit

COOL RUNNING ALUMINUM OXIDE GRINDING WHEELS

Perfect for HSS, these premium grinding wheels are designed to resist glazing & grind cooler on all types of steel.

Hard, sharp particles of aluminum oxide grit are held in a vitreous bond which breaks down easily in use, constantly exposing fresh, sharp grit to the edge being ground. Wheels are provided with bushings for 5/8” & 1/2” arbors. Max. safe speed is 4200 rpm for 6” wheels, 3200 rpm for 8” wheels. Wheel code is 38AJ5V. 425391 425392 425393 425394 425395 425396

6” x 3/4” 60X Premium Wheel 6” x 3/4” 100X Premium Wheel 8” x 1” 60X Premium Wheel 8” x 1” 100X Premium Wheel 1” - 1/2” Bushing for 3/4” Wheels 1” - 1/2” Bushing for 1” Wheels

The Work Sharp sharpening machine uses sandpaper discs for sharpening chisels, plane irons & carving tools up to 2” wide (3” with optional wide blade attachment).

The 1/5 HP motor spins at a comfortable 580 rpm, so you can easily sharpen other tools freehand. When sharpening chisels & plane irons, an air-cooled heat sink prevents burning & eliminates the need for messy lubricants. You flatten & polish tool backs on top of a 6” dia. x 3/8” thick Tempered Glass Wheel coated with adhesive backed sandpaper (paper mounts on both sides of the glass). Honing the bevel happens from beneath the glass on the angle port which adjusts to 20°, 25°, 30° & 35° for precise & repeatable sharpening. Carving tools are ground beneath a Slotted Wheel that lets you see the tool’s bevel as you grind & keeps a cooling stream of air flowing over the tool. The Abrasive Kit has 1 ea. 120, 400, 1000, & 3600X sharpening disc & 80, 400 & 1200X slotted sharpening disc.

Use the Crepe Stick to clean you sandpaper. Acetone is recommended to clean the glass & plastic backers.

Note: While the manufacture states to use included 400X paper in the angle port for final burr removal on the polished back of the tool, we recommend using a finer grit paper (3600 or 6000X) & lightly lap by hand to avoid scratching the surface.

303001 Work Sharp 3000 Sharpening Center $199.99 (Work Sharp 3000, 2 Tempered Glass Wheels, 1 Slotted Wheel, Tool Rest, Crepe Stick & Abrasive Kit)

WIDE BLADE ATTACHMENT Optional attachment for sharpening plane irons & chisels up to 3” wide on the top wheel. Jig sets angles to 15, 20, 25, 30, 35, 40, 45, 50 & 60° & has a 1° micro-bevel.

303022

Wide Blade Attachment $69.99 (5” x 3” table, honing guide & alignment jig)

WORK SHARP 3000 TOOL BAR ATTACHMENT This attachment allows you to use Tormek’s accessory tool jigs on your Work Sharp unit, greatly increasing the types of tools you can precisely reference & sharpen on the Work Sharp. It accepts Tormek jigs: SVS32, SVS50, SVD110, & SVD185. The tool bar can also be used as a stabilizer for free-hand sharpening on both the topside & underside of the Work Sharp unit. Tormek Jigs sold separately, see page 14.

303039

Work Sharp 3000 Tool Bar Attach.

$49.99

$35.99

$24.99 $24.99 $34.99 $34.99 $1.99 $1.99

2-YEAR MANUFACTURER’S WARRANTY

WS 3000 includes Top Tool Rest 2 Tempered Glass Wheels Slotted See-Through Wheel Crepe Stick & Abrasive Kit

TEMPERED GLASS & SLOTTED WHEELS Having extra wheels around keeps you from having to strip the paper off every time you change grits.

303003 Tempered Glass Wheel

paper applies to 2 sides 303004 Slotted Wheel paper applies to 1 side

$19.99

303024

$24.99

$19.99

FELT POLISHING WHEEL Use to polish & deburr. Includes honing compound.

Felt Polishing Wheel

SURFACE CONDITIONING WHEEL Medium density non-woven surface removes rust, paint & other coatings. Conforms slightly to irregular shapes.

303025

Surface Conditioning Wheel $19.99

LEATHER STROP A leather disc on 6” dia. tempered glass for power or non-power stropping. Flip over to attach abrasive disc.

303002 Leather Strop (includes honing compound) $29.99

SLOTTED ABRASIVE KIT For slotted see-through wheel, use to sharpen carving tools.

303008 Slotted Abrasive Kit $14.99 (1 P80 slotted sharpening disc, 2 ea. P400 & P1200 slotted sharpening discs & 1 P6000 micro-mesh slotted sharpening disc)

HONING ABRASIVE KIT Use to polish & hone after using the fine abrasive kit.

303007 Honing Abrasive Kit $14.99 (1 ea. 3600 & 6000 micro-mesh sharpening discs)

FINE ABRASIVE KIT Use after coarse abrasives & for edges in good shape.

303006

Fine Abrasive Kit (4 P400 & 6 P1000 sharpening discs)

$14.99

COARSE ABRASIVE KIT To shape new bevels, rework edges & flatten tool backs.

303005 Coarse Abrasive Kit $14.99 (2 ea. P80, P120 sharpening discs & 3 P220 sharpening discs)

12 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Sharpening Tools

ONEWAY’S WOLVERINE GRINDING JIG

Automates grinding & sharpening all your turning tools

This simple jig comes with 2 bases. Mount one under each wheel of your grinder; GRINDER NOT INCLUDED & move the tool holder from fine to coarse grit in seconds. The Wolverine includes a V-arm for holding gouges, skews, chisels & carving tools; & a 3” x 5” adjustable platform for scrapers to grind their high bevel angle. Set a standard angle in an optional Extra Platform Rest while varying the angle in the other. An optional Skew Grinding Attachment provides symmetrical left & right handle rests to grind both skew bevels.

For use on your bowl gouges, we highly recommend Oneway’s optional Vari-Grind attachments (VariGrind 2 & Standard for tools up to 5/8” dia. & Large for 1/2” to 1-1/8” dia.). They provide exquisite control for grinding almost any bevel, & let you create custom shapes. The Vari-Grind 2’s patented pivot point moves the tool in a cylindrical motion creating a properly shaped conical sectioned cutting edge with a true side & edge grind at any bevel angle. A safety feature prevents the jig from accidentally lifting from the base.

The Vari-Grind 2 with base is for use without a Wolverine Jig. An optional Dressing Attachment jigs a diamond wheel dresser to true up your grinding wheels.

425375 425398 425399 425397 425376 425379 425378 425377

Wolverine Grinding Jig Vari-Grind 2 Attachment Vari-Grind 2 Attachment w/Base Large Vari-Grind Attachment Vari-Grind Attachment Skew Grinding Attachment Extra Platform Rest Dressing Attachment

$86.99 $74.99 $107.99 $52.99 $52.99 $29.99 $29.99 $65.99

SIDE CLAMP HONING GUIDE This simple, economical guide sharpens small 2mm chisels up to #8 plane irons, (from 1/16” to 3”). 1/2” Roller wheel.

128250

Side Clamp Honing Guide

$10.99

VERITAS® ADJUSTABLE HONING GUIDE & ANGLE JIG Veritas’s original honing guide has a brass roller wheel mounted on an eccentric axle allowing you to dial in a 1° or 2° micro bevel. A large brass screw clamp with swivel foot pad holds blades up to 2-1/2” wide & 5/8” thick. The Veritas Angle Setting Jig sets the sharpening angles of 15°, 20°, 25°, 30° & 35° quickly & accurately.

427002 427003 427004 427013

Veritas Honing Guide Angle Setting Jig Guide & Jig Together Small Blade Holder

$41.99 $19.99 $54.99 $23.99

VERITAS® MK II HONING GUIDE Solves many of the problems related with sharpening jigs.

This will hold flat & tapered chisels & oddly shaped blades from 1/4” to 2-7/8” wide & up to 1/2” thick, even short Stanley Type 151 spokeshave blades. Its long roller wheel prevents tipping & utilizes a 3 position eccentric cam for applying micro-bevels without repositioning the blade. The best feature, however, is the integral registration jig that automatically squares your blade to the guide – no more skewed blades. The registration jig has 3 color-coded bevel ranges: high (25°-54°), standard (15°-40°) & backbevel (10°-20°). The easy-to-use, built-in bevel stop lets you choose your angle without trial & error. Includes instructions.

177031 Veritas® MK II Honing Guide

$69.99

TORMEK BENCH GRIND MOUNT For Sharpening Woodturning Tools

Adapt your standard grinder to use Tormek’s Universal Gouge Jig, GRINDER & SVD-185 JIG NOT INCLUDED Multi-Tool Jig & Tool Rest

The BGM-100 allows Tormek’s innovative sharpening jigs for turning tools to be used on a standard bench grinder with 6”-10” dia. wheels. It includes a universal support bar, horizontal base, mounting screws & an in-depth manual. Use 3/4” plywood to build a platform & base block for your grinder. Jigs sold separately.

186124 186125

186107 SVD185 SVS50 SVD110

Tormek BGM-100 Bench Grind Mount $64.00 BGM-100 Package $179.99 (BGM-100, TTS-100 & SVD-185 Jig) TTS100 Turning Tool Setter $33.00 Universal Gouge Jig $94.00 Multi Tool Jig $66.00 Tool Rest $37.00

156623

Norton Portable Waterstone System $239.99

NORTON PORTABLE WATERSTONE SYSTEM This combination workstation and storage case includes Norton’s 1000, 4000 & 8000X combination waterstones on a triangular holder that rotates them into position for use. The upper case serves as a water tray while a lower compartment has storage for chisels. Includes Norton’s waterstone sharpening DVD. VERITAS® GRINDER TOOL REST This freestanding tool rest replaces the clumsy rests on 6” & 8” bench grinders. The large (4” wide), easily adjusted surface is notched to fit around wheels or belts up to 1” thick. Use holes in the base to bolt to a workbench.

422603 422604

Veritas Grinder Tool Rest Veritas Chisel & Plane Iron Jig

$64.99 $31.99

DUAL-USE GRINDING JIG & HONING GUIDE A removable roller attachment on this jig lets you grind tools on your GRINDING HONING bench grinder or Makita 9820-2, then hone them by hand with perfect angle control. The brass roller is 1-1/2” wide, ideal for use on waterstones, sandpaper and leather strops. The jig holds tools up to 2-5/8” wide & 7/16” thick.

Bevel angle is determined by how far the tool protrudes past the front of the jig.

422601

Dual-Use Hand Tool Jig

$14.99

VERITAS® CAMBER ROLLER For MKII Honing Guide This barrel shaped roller replaces the standard flat roller on the Veritas® MK II honing guide. The camber roller lets you alternate finger pressure over either side of your plane blade to produce a slightly convex cutting edge. Instructors like Toshio Odate & David Charlesworth advocate curved or cambered edges to prevent ridgelines when smoothing wide panels. Once installed, use the sliding stop to set bevel angles & the 3-position cam for micro-bevels.

177040

Veritas® Camber Roller for MK II

$22.99

CHISEL & VERITAS® SKEW JIG HONING GUIDE NOT INCLUDED For MKII Honing Guide This guide for the MK II sets skew angles from 10° to 45° on left & right skew blades & chisels. Sets 20°, 25°, 30° & 35° bevel angles.

177039

Veritas® Skew Jig for MKII $32.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 13

Tormek

These Swedish machines are unsurpassed for quality, versatility, edge positioning accuracy & repeatability when grinding, sharpening & honing most every tool in your shop & home.

TORMEK T-7 SHARPENING SYSTEM Tormek’s T-7 has a 10” ceramically made, 220X aluminum oxide grindstone wheel. A quiet, yet powerful AC motor spins the stone on a stainless steel shaft at 90 RPM. The wheel is continuously bathed in water, keeping your tool’s edge cool & free from any risk of overheating. The rotation rate avoids slinging water while the water tray captures the grinding dust, eliminating any air-borne respiratory hazards.

There are optional jigs for practically every kind of tool. The jigs slide onto a micro-adjustable tool rest bar & operate parallel to the wheel without requiring calibration. Most work happens above the wheel, grinding into the tool’s edge. However, the tool rest can be moved into the in186114 Tormek T-7 Sharpening System $639.00 (Includes Square Edge Jig, Pro Anglemaster, Universal cluded Horizontal Base for more jig positioning choicSupport Bar with Micro-adjust, Truing & Dressing Tool TT50, es & to grind away from the tool’s edge.

7 YEAR WARRANTY! (additional 3 years with tool registration!)

Stone Grader SP650, AWT-250 Water Trough,

Stropping Paste, Tormek Handbook & DVD) The Stone Grader allows you Stone Grader to grade the stone from 220X STANDARD EQUIPMENT (Included with Tormek T-7) SP650 to 1000X in about 30 seconds. 186118 Square Edge Jig $58.00 Best of all, you go quickly from SP650 Stone Grader $28.00 $9.99 grinding to sharpening with- PA70 Spare Stropping Paste $26.00 out the bother of changing out WM200 Pro Anglemaster wheels or altering your jig or tool rest settings, sharp- 186127 AWT-250 Advanced Water Trough for T-7 $27.00 $16.99 ening at exactly the same angle at which you ground 186106 Tormek DVD HB10 Tormek Handbook $33.50 the tool.

US105 Universal Support Bar w/ Micro-adjust $43.00 Hone the tool’s edge on the Leather Stropping TORMEK ACCESSORY KITS Wheel. Charged with stropping paste, the spinning 186115 Tormek TNT-708 Woodturner’s Kit $324.00 wheel will hone an edge in just 10 to 20 sec.

Includes SVD185, SVS50, SVD110, LA120, MH380, The Jointer/Planer Jig will handle machine knives TTS100 & Woodturner’s Instructional Book & DVD 5/8” & wider in virtually any length.

186116 Tormek HTK Hand Tool Kit $178.00 The Multi Tool Jig is used for square-nosed turning Includes SVM45, SVM140, SVS32, SVX150 & SVA170 gouges, carving gouges, & angled tools.

186117 Woodturner’s Instruction Box $34.00 The Tool Rest is a platform that locks at any angle; it Woodturner’s Instructional Book & DVD (also inTNT-708 Kit) works well for scrapers, bark spuds or anything else OPTIONAL JIGS & ACCESSORIES too uncommon to have a jig of its own.

The Universal Gouge Jig’s articulated, adjustable 186128 T-7 Upgrade Stainless Steel EzyLock Shaft $64.00 $94.00 design lets you grind any carving or turning gouge. It’s SVD185 Universal Gouge Jig SVS50 Multi Tool Jig $66.00 perfect for side-ground bowl Universal Gouge 186101 LA120 Profile Strop $62.00 gouges, V & bent carving gougJig $37.00 es, and replaceable HSS turn- SVD110 Tool Rest SVM45 Short Knife Jig $38.00 ing tool cutters.

186119 SVM140 Long Knife Jig $54.00 The Short Knife Jig handles SVS32 Short Tool Jig $27.00 SVD185 most knife blades in the kitch- SVX150 Scissor Jig $52.00 en or shop (as short as 2-1/2”). The Long Knife Jig SVH320 Jointer & Planer Blade Jig $186.00 handles long thin blades & x-large chef’s knives.

SVA170 Axe Grinding Jig $18.00 $26.00 The Square Edge Jig sharpens chisel & plane irons MH380 Tormek Dust Cover 186105 Tormek Shop Apron $41.00 and ensures a square grind of the cutting edge.

The Pro Anglemaster sets angles from 15° to 75° & 186103 LA124 Narrow Profiles (for LA120 strop) $41.00 $178.00 adjusts for wheel dia. from 10” to 6”. So you can SG250 Repl. 10” 220X Grinding Wheel maintain accuracy on aging wheels & use it on other 186123 10” 4000X Japanese Waterstone Wheel $294.00 186122 10” 220X Blackstone Silicon Wheel $204.00 grinders too.

Repl. Std. Strop Wheel $67.00 Use the TTS100 Turing Tool Setter for instant repli- LA220 186102 LA122 Repl. Profiles (for LA120 strop) $41.00 cation of the grinding geometries on your gouges.

SVD005 Upgrade Kit (converts SVD180 to SVD185) $23.00 The TT50 Stone Truing & Dressing Tool keeps 186113 Upgrade for old style AV50D Truing Tool $61.00 your wheel’s surface flat & square.

186107 TTS100 Turning Tool Setter $33.00 The new DBS-22 Drill Bit Sharpening Jig will grind 186112 TT50 Stone Truing & Dressing Tool $86.00 a 4-facet chisel edge onto a bit end from 1/8” (3mm) 186134 DBS-22 Drill Bit Sharpening Jig $272.00 to 7/8” (22mm) in dia.

186138 Tormek Rotating Base $55.00 The T-3 brings a new level TORMEK T-3 SHARPENING SYSTEM of affordability to the Modeled after the legendary Tormek T-7, the T-3 uses a smaller 8” x 1-5/8“ 220X Tormek water cooled aluminum oxide grinding wheel. The housing is made from durable system of ABS plastic & the stone is powered by a long life (25,000 hours) sharpening. whisper quiet 120V AC motor. All the optional tool jigs for the T-7 are 100% compatible with the T-3 model, providing the same level of sharpening repeatability while removing only minute amounts of steel at each sharpening.

Covered by 7 year warranty

186120 Tormek T-3 Sharpening System $379.00 (Includes Square Edge Jig, Pro Anglemaster, Universal Support Bar with Micro-adjust, Stropping Paste, Tormek Handbook & DVD) 186129 T-3 Upgrade Stainless Steel EzyLock Shaft $58.00 SP650 Stone Grader $28.00 186121 Repl. 8” 220X Grinding Wheel $106.00 186108 8” 4000X Japanese Waterstone Wheel $210.00 186130 Repl. Std. Strop Wheel $42.00

14 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Scraping Tools

SCRAPER & SAW JOINTER This handsome hardwood holder, with a brass clamping bolt, ac- A well-sharpened scraper can cut your finishing time in half. cepts a 6” or 8” mill bastard file so LIE-NIELSEN SCRAPER SET you can joint the edge of your cabinet scraper This pair of fine Swedish or the teeth on your handsaw. Shellac finish. steel card scrapers is a little softer than the Bahco 474s.

177952 Scraper & Saw Jointer (4-1/2” x 2-1/4”) $19.99 8643772 6” Mill Bastard File $5.99 One is moderately stiff, at .032” thick, the other is 432447 8” Mill Bastard File $6.99 .020”, for conforming to curved surfaces.

Lie-Nielsen Scraper Set $14.99 BAHCO CARBIDE SCRAPERS 434263

Double-edged carbide blades stay sharp many times longer than the finest steel. $29.99 Model 665’s large knob on a 431511 665 2-1/2” Scraper $20.99 2-1/2” head allows aggressive 130051 650 2” Scraper work better than any other scraper we’ve 431512 625 1” Triangular Scraper with Holster $20.99 2-1/2” Repacemant Blade $9.99 used. The 650’s 2” blade is for less 431508 431507 2” Replacement Blade $9.50 vigorous scraping in tight quar- 431506 1” Triangle Replacement Blade $8.99 ters. Model 625’s 1” triangular 431513 Round Blade (448/625 Scrapers) $8.50 blade rotates to work flat or on a point for detail 431514 Pear Shaped Blade (448/625 Scrapers) $8.50 work. Includes plastic belt holster.

130052 Drop-Shaped Blade (448/625 Scrapers) $8.50

CURVED SCRAPERS This very flexible set of finely polished .016” thick Swedish steel scrapers is ideal for fine, detailed work. Includes two rectangles with edges varying from 1-1/8” to 2-1/4” long, ellipses at 1-1/4” x 2” & 1” x 1-3/4”, & three scrapers with one straight edge & one arc ranging from 2” to 4-1/4”.

310115

Set of 7 Curved Scrapers

$49.99

SCRAPER SETS These sets of 3 curved scrapers contain a rectangle with convex/concave ends; a French-curve for large or small concave surfaces & a gently cambered style. Rc 48-52.

GARLICK SAW CO. CABINET SCRAPERS These cabinet scraper sets offer a range of sizes that will prove useful in scraping chair legs, spindles & convex profiles such as bull noses, beads, & roundovers, as well as coves & flutes and other concave profiles. Perfect for scraping machining & milling marks or for removing finishes when refinishing. Made from fine European steel in Sheffield, England, these 2 piece sets have sizes from 1/4” to 1-1/2” in dia. in 1/8” increments.

Garlick Concave Cabinet Scraper Set $16.99 (for scraping convex shapes) Garlick Convex Cabinet Scraper Set $16.99 (for scraping concave shapes)

CURVED SCRAPER SET Crown molding, flutings & other shaped surfaces can be finished quickly & effectively with one or the other of these specially shaped card scrapers. Clifton’s Sheffield steel is easy to sharpen & burnish. .032” thick.

435302

Pair of Curved Scrapers

$8.99

435304

Kunz Triangular Scraper Burnisher

$17.99

TRIANGULAR SCRAPER BURNISHER Kunz’s traditional triangular burnisher has a beech handle. Broad flat surfaces let you lay a fine hook, while sharp corners exert more pressure for making aggressive hooks on the hardest of scraper blades.

HOCK BURNISHER Hock’s 3/8” x 6” polished steel burnisher is slightly chamfered on both ends for comfortable, handle-free use. Or, use the 3/32” hole at one end to add your own custom handle or lanyard. Rc 64.

122537

Hock Burnisher

431509 431510

Bacho 474 Card Scraper (.032”) Bacho 474 Card Scraper (.023”)

$7.99 $7.99

PREPARED EDGE SCRAPER This German scraper comes with edges polished & ready for burnishing. 2-2/8” x 5-7/8” x .030”.

177023 Thin Set of 3 Scrapers (0.4mm or 0.016”) $16.99 177024 Thick Set of 3 Scrapers (0.6mm or 0.024”) $16.99

159551

159552

BAHCO 474 SCRAPERS Hard Swedish steel takes a fine burr & holds it longer than ordinary card scrapers.

The .032” thickness scraper OUR FAVORITE SCRAPER is moderately stiff, perfect for finishing flat surfaces.

The more flexible 474 with .023” thickness is for spot work & curved surfaces. Sharpen before use.

$14.99

167206

Prepared Edge Scraper (Rc 54) $16.99

VERITAS SCRAPER HOLDER Brass cams hold a 6” wide scraper securely, at the height you choose. A screw-driven center pad sets to hold the scraper flat or to provide any amount of bow for spot work. The holder’s design works equally well pulling or pushing. Includes instructions & sharpened scraper.

437003

Veritas Scraper Holder

422605 432447

Veritas Jointer/Edger 8” Mill Bastard File

$45.99

VERITAS JOINTER/ EDGER FOR HAND SAWS & SCRAPERS This simple jig holds an 8” mill bastard file perpendicular to a fence face, making it a snap to file scraper edges square or to joint the teeth on a handsaw before resharpening. A second fence tilted at 45° sharpens the blades of handled scrapers (ie; #80).

KUNZ

$24.99 $6.99

#80 HANDLED SCRAPER This #80 handled scraper quickly takes down flat open surfaces, with far less strain & heat on the fingers than with hand scrapers. 2-3/4” blade has a 25°- 45° bevel, & the cutting edge is lightly turned toward the back with a burnisher. It takes full-width shavings, or bow it slightly with a thumb screw for delicate shavings with no edge beads showing.

433903 433929 122531

Kunz #80 Scraper Replacement Blade 2-3/4” Hock #80 Scraper Blade

$39.99 $8.99 $24.99

ROUND BURNISHER Traditional rosewood-handled burnisher with polished HSS rod for use on straight or curved scrapers.

435306

Round Burnisher

$19.99

SEE OUR CABINET SCRAPERS USER’S GUIDE UNDER THE LIBRARY TAB ON OUR WEBSITE 15

Chairmaking Tools

SPOON BITS No other bits can match these for

BUILD A SCULPTURED LOW BACK DINING CHAIR with Charles Brock SALE! DVD, Book & Full-Size Patterns The flowing organic curves of this chair soothe the eyes & relax the body. Build a complete set or just one to use as a beautiful contemporary side chair. This plan bundle take you from wood selection to final finishing. 130 min. DVD, 40 page book & full sized patterns. (Some prefer to build the dining chair first, before taking on the rocker.)

208821 Sculptured Low Back Dining $49.99 $89.99

Chair Pattern Set with Charles Brock

BUILD A SCULPTURED ROCKER with Charles Brock – DVD, Book & Full-Size Patterns Charles Brock has created plans & instructions for building this beautiful sculpted rocking chair. A lively 103 minute SALE! DVD, 48 page book & full-size patterns equip you with the knowledge to build your own rocker.

208801 Sculptured Rocker Pattern Set $69.99 $89.99

with Charles Brock

SHAPING A SCULPTURED ROCKER DVD with Charles Brock This companion DVD covers the tools, tips & techniques needed to create graceful, “fair” curves, while maintaining side to side symmetry. An analysis of the rocker’s lines & surfaces in three views helps you learn how to sculpt the individual parts so they appear to flow together.

208831

Shaping a Sculptured Rocker $29.99 with Charles Brock, DVD (110 minutes)

Charles recommends the Chair Sculpting Rasp Set on page 39.

SCULPTED CHAIR COMPONENT KITS

Building your own Sculpted Rocking & Dining Chairs just got a whole lot easier!

These Chair Component Kits are comprised of beautiful American walnut (with rosewood plugs & maple strip inserts for the rocker). The tricky seat to leg joinery is done, as is the coppering & mortises needed for gluing up the seat staves. It eliminates the need for a wide bed jointer, mortising machine & router bit joinery set & reduces building time & costly mistakes. You’ll still have lots of building, bending (rocker), drilling & shaping to do, but the finding, selecting & planing of stock & machining the critical joinery has been done for you!

Rocker Kits ship within the lower 48 states for $45 surcharge.

120601 Sculpted Rocker Kit $1399.99 $1499.99 (Pre-cut wood parts, does not include plans & instructions.)

120602 Sculpted Rocker Kit $1449.99 $1549.99

& DVD/Book/Pattern Set Bundle Dining Kits ship within the lower 48 states for $35 surcharge.

120603 Low Back Dining Chair Kit $899.99 $999.99 (Pre-cut wood parts, does not include plans & instructions.)

120604 Low Back Dining Chair Kit $939.99 $1039.99

& DVD/Book/Pattern Set Bundle

PORTABLE STEAMER FOR BENDING WOOD FOR INFO ON BUILDING A far safer than an open burner STEAM TUBE, GO TO OUR WEBSITE & CLICK ON THE This 8” x 12” electric (120V) LIBRARY TAB ON THE steamer with a 1.3 gal. water HOMEPAGE. reservoir gives 137 min. of steam. Thermal protectors & pressure valve protect against overheating. Includes fitting for steam box hose connection & 12’ double walled hose. For large steam boxes, use 2 steamers to maintain optimum temp.

192938

Earlex Steam Generator 1500W

$69.99

chairmaking, no matter how expensive the tools or how complex the jigs to control them.

Spoon bits let you drill at any angle with great control, with the ability to change direction at any time.

Indispensable for drilling holes for chair spindles.

471129 4 Spoon Bit Set (3/8”, 7/16”, 9/16” & 5/8”) INDIVIDUAL SPOON BITS 471125 3/8” $35.99 471128 5/8” 471126 7/16” $37.99 471124 11/16” 471123 1/2” $40.99 471133 3/4” 471127 9/16” $41.99

$154.99 $45.99 $46.99 $53.99

One secret of a SPOON-TYPE Windsor chair’s durability TAPERED is the self-tightening tapered joints.

REAMER Bore a mortise with a spoon bit, then use the tapered reamer with a light, controlled scraping action to widen the mortise into a conical hole to match the turned tenons on the legs & posts.

471131

Tapered Reamer $64.99 See our Windsor Chair Kits on our website.

COMPASS PLANE The exact sweep & radius of this nicely shaped plane is perfect for smoothing a scooped chair seat. Maple body fits your hand like a glove. Blade arrives sharp & ready to use.

471141

Compass Plane

$109.99

BIT BRACE Universal jaws

will accept tapered or straight shank bits.

This classic brace has an open ratchet for forward or reverse partial rotation in tight quarters. Compact, efficient 10” swing.

171822

Bit Brace

$19.99

FROE A simple tool for splitting straight-grained wood The 16” iron blade is fitted with a 19” hickory handle. Drive the thick, blunt blade into your stock, & pull or push the handle to direct the split’s runout. 2.85 lbs.

129857

Froe

$74.99

GRÄNSFORS BRUKS HAND ADZES Forged with a drooped head, these compact OUR FINEST adzes have a 10” angled handle for maximum HAND effectiveness with a flick of the wrist. 2” wide ADZES blade. Head weighs 1.35 lbs. Includes leather sheath with snap. Limited production, order ahead.

125831 125852

Gränsfors Bruks Gutter Hand Adze Gränsfors Bruks Straight Hand Adze

$310.00 $300.00

HAND-FORGED AURIOU ADZES Made from high quality fine-grain steel, the adze head has a counter bal#3 ancing heel that gives superb balance when #5 swinging, serves as a strike spot for use with a #7 mallet & makes it easy to grip the head for #9 close-in detail chopping. Use deep sweeps for hollowing chair seat bottoms & dough bowls & the milder sweeps for dressing timber beams & fast stock removal. Straight 12” long ash handle. Head is approx. 9-1/4” long. OAL 14-1/2”.

Auriou Carver’s Adze $129.99 each 126133 126134 126135 126136 #3 x 65mm #5 x 60mm #7 x 60mm #9 x 50mm

FOOT ADZES - Made in Germany This Gutter Adze is for scooping out chair seats & other concave surfaces. It has a 6” x 2-3/4” A blade with an 1-1/2” radius & is 31-1/2” long.

The 32” Straight Adze rough dimensions tim- B bers & has a 3-1/4” wide blade with a slight radius for fast stock removal.

A 129851 B 129852

Gutter Adze (3 lbs.) $84.99 Straight Adze (3-1/2 lbs.) $69.99

16 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

Spokeshaves & Drawknives

BARR CHAIRMAKER’S DRAWKNIFE This hand-forged tool has a hollow ground, razor sharp, 6-3/8” cutting edge.

Hardwood handles are secured via cap nuts on full length threaded tangs. 1 lb. OAL 13”.

129658 Barr Chairmaker’s Drawknife

Dimensions reflect size of cutting edge & total tool length.

$129.99

BARR DRAWKNIVES

125198 125050

Hand-forged in the USA.

Hand-forged wear-resistant steel has a tough cutting edge, & nicely shaped hardwood handles are bent to an approx. 20° angle for comfortable, efficient use. Larger sizes are designed for peeling logs (although their sharp edges allow fine work as well); the Carver’s knife has a gently radiused edge & a small back bevel to maximize control & minimize tear-out.

129653

129678 129652 129679 129651 129680 A

6” Carver’s Drawknife $129.99 (1-1/2” x 6” blade , OAL 15”) Small Leather Blade Guard $29.99 9-1/2” Drawknife (3” x 9-1/2” blade, OAL 19”) $149.99 Medium Leather Blade Guard $34.99 12” Drawknife (3” x 12” blade, OAL 22”) $159.99 Large Leather Blade Guard $39.99

Size is blade length.

B

A 129702 B 129703 129704 129707

GERMAN DRAWKNIVES The finest quality German steel assures a long lasting edge.

9” Straight Drawknife 9” Curved Drawknife 5-1/2” Curved Drawknife 12” Curved Drawknife

$36.99 $54.99 $69.99 $69.99

BARR SCORP Commonly called an inshave, this deeply curved drawknife has the perfect sweep & handle angles for rapid, aggressive shaving without excessive effort or tearing at cut edges.

471139 4” Dunbar Style Chairmaker's Scorp $139.99 129650 6-1/2” Chairmaker's Scorp $139.99

OXHEAD INSHAVE A specialized drawknife for hollowing out bowls, chair seats, etc. 8” cutting edge. Beech handles. Fine German steel blade.

125301

Oxhead Inshave

These beautiful little drawknives are FLEXCUT DRAWKNIVES made of high quality spring steel, sharpened & polished to a razor edge.

Flexcut’s sculpted handles are set in the plane of the blade & splayed for comfortable pulling. Perfect for roughing in carving blanks, or shaving furniture parts down to rough size. Includes leather blade sheath. $36.99 $44.99

AURIOU Honed & ready for use.

DRAWKNIVES Auriou’s Large, Curved Blade Drawknife has a 9” curved blade with a gentle radius & an effective blade angle for fast, controlled cutting. Turned 5” walnut handles with brass ferrules are 13-1/2” apart on center at the blade. The handles splay out 8° to reduce fatigue during extended use. 1.2 lbs.

The 6” blade’s leading edge on the Small Crank Handle Drawknife is straight, but the entire blade is slightly concave. This allows a shorter cutting length of the blade to be engaged with the stock for accurate & delicate trimming. The cranked handles drop your grip just below the edge of the blade letting a slight twist of the wrists control the cut. 3-1/4” beech handles with brass ferrules are 12” apart on center. .7 lbs.

126138 Auriou Large Curved Drawknife $129.99 126137 Auriou Small Crank Handled Drawknife $119.99

TRAVISHER An endangered species of woodworking tool This 3” wide convex spokeshave is used for chair seat shaping after the adze, scorp & compass plane have roughed in & refined the form. The handles continue the blade’s curve, rising out of the way of adjacent surfaces for unobstructed reach into deep hollows.

471144 Travisher $119.99

VERITAS CORNERING TOOLS These are the lightest & most casual tools we know of for rounding over edges quickly.

Each tool cuts on a push or a pull stroke & has 2 cutting radii: 1/16 & 1/8”, and 3/16 & 1/4”. Includes a tool for resharpening cutting edges.

436003

$64.99

Flexcut 3” Straight Drawknife Flexcut 5” Curved Drawknife

Pair of Cornering Tools w/ Sharpener $38.99

LIE-NIELSEN BRONZE BEADING TOOL This cross between a spokeshave & a router plane is designed for scraping beaded, reeded or fluted profiles onto table edges or moldings. It includes 7 double-ended cutters which cut 14 different shapes, & 2 blank blades which can be filed to any shape you like. These blades will also fit the 434214 L-N Beading Tool with Cutters Stanley #66 & are available in a cutter set. The bead434224 L-N Cutter Set Only ing tool includes both straight & curved fences.

434225 L-N Set of 5 Blank Cutters

$175.00 $56.00 $8.00

VERITAS LOW ANGLE SPOKESHAVE Based on 19th century wooden spokeshave design, this small shave’s easily adjusted reversible toe piece handles flat or concave work equally well. The 10-1/2” body is solid die-cast aluminum, giving it nice heft. The A2 tool steel blade LIE-NIELSEN BOGGS SPOKESHAVES (2” x 1/8”) holds an edge several times longer than These lovely bronze spokeregular high-carbon steel. shaves with hickory han477018 Veritas Low Angle Spokeshave $79.99 dles are less prone to chatter 477020 2” Replacement Blade $26.99 & tear out than other shaves & are ideal for chairmaking. A2 steel blades are 1/8” thick x C CONVEX & 2” wide. Soles are 1” wide. OAL 10-1/2”. 12 ozs.

D CONCAVE 434294 L-N Boggs Flat Spokeshave $135.00 CUTTERS 434295 L-N Boggs Curved Spokeshave $135.00 These 10” wide spokeshaves are excellent for planing curved surfaces along the grain. Both have a curva- ADJUSTABLE THROAT SPOKESHAVE ture radius of 2” & have 2” wide blades.

This spokeshave’s throat mechanism has a screw ad C 433908 Convex Cutter $26.99 justment for fine setting of the opening. 2-1/16” blade.

433909 Convex Repl. Cutter $7.99 D 433910 433911

Concave Cutter Concave Repl. Cutter

$26.99 $8.99

433905 433906

Adjustable Throat Spokeshave (OAL 10”) $32.99 Replacement Cutter $6.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 17

Planes

LIE-NIELSEN PLANES

ITEM NO PLANE MODEL

Crafted in Maine since 1981

434201 434210 434219 434264 434265 Lie-Nielsen Planes Lie-Nielsen is a proven world-class manufacturer 434234 of metal-bodied hand planes. Whether the plane 434235 body is bronze or ductile-iron, the machining & 434262 final finish of a Lie-Nielsen plane makes for a 434236 beautiful, full-functioning tool right out of the box. 434274 They cut beautifully & hold their edge well.

434268 Handles & knobs are finished cherry & lever 434249 caps are polished bronze.

434275

LIE-NIELSEN BRONZE 101 BLOCK PLANE Also called a “Violin” plane by L-N, this petite plane is perfect for all sorts of fine detail work.

No. 1 No. 2 No. 2 No. 3 Smooth No. 3 Smooth No. 4 Smooth No. 4 Smooth No. 4-1/2 Smooth No. 5 Jack No. 5-1/2 Jack No. 6 Fore No. 7 Jointer No. 8 Jointer

NEW

Based on the vintage Stanley 101 block plane, this plane can trim small tenon faces, plugs & inlays, flush proud dovetails, as well as ease & chamfer crisp corner edges. Its 3-7/16” x 1-3/16” solid bronze body fits where a standard size block plane can’t. A2 steel, 7/8” wide x 1/8” thick iron is bedded at 18°. The precise depth adjuster makes controlling the cutter flawless. 1/2 lb.

134182

Lie-Nielsen Bronze 101 Block Plane

$95.00

LIE-NIELSEN SIDE RABBET PLANE SET For trimming dadoes, rabbets, stub tenons or shoulders, this matched pair of bronze planes is the perfect choice. They cut to 1/2” max. depth, & fit into grooves as narrow as 3/16”.

A removable shoe forward of the iron allows trimming into corners. This right & left hand set is based on Stanley’s Nos. 98 & 99. Cherry knobs. 10-1/4” body.

434259 434253 434254

Lie-Nielsen Side Rabbet Plane Set $225.00 Lie-Nielsen No. 98 Repl. Iron $35.00 Lie-Nielsen No. 99 Repl. Iron $35.00

LIE-NIELSEN NO. 85 CABINETMAKER’S SCRAPER – the perfect size for finishers The unusual ductile iron body is like a rabbet plane, with open sides & a full-width blade to allow scraping flush into corners along adjacent surfaces. Knob & handle tilt right or left to facilitate scraping flush or angled surfaces. Bronze frog secures 2” iron at 20° forward. 8-1/4” x 2”. 3lbs.

434271 434272

L-N Cabinetmaker’s Scraper No. 85 Repl. Iron

$215.00 $40.00

LIE-NIELSEN SCRUB PLANE The scrub plane is used for dimensioning & truing rough-sawn lumber, aggressively taking thick shavings diagonally across the grain.

3/16” thick, 1-1/2”wide iron is ground convex for deep cuts without tearing at the edges, leaving characteristically scalloped surfaces that are a hallmark of the hand-tool purist. 10-1/4” ductile iron body. Cherry knob & handle.

434212 434226

Lie-Nielsen Scrub Plane L-N Scrub Plane Repl. Iron

LIE-NIELSEN LOW ANGLE JACK A low 12° bed angle combined with a 3/16” thick x 2” wide iron, enables this 14” long ductile iron adjustable mouth jack plane to cut super smoothly, especially on unruly end grain.

434213 434227 134137 134031

$165.00 $35.00

Lie-Nielsen Low Angle Jack Plane $245.00 L-N Low Angle Jack Repl. Iron $40.00 L-N Low Angle Jack 90° Scraper Iron $45.00 L-N Low Angle Jack Toothed Iron $65.00

BODY IRON WIDTH OAL

Bronze Bronze Iron Bronze Iron Bronze Iron Iron Iron Iron Iron Iron Iron

1-3/16” 1-5/8” 1-5/8” 1-3/4” 1-3/4” 2” 2” 2-3/8” 2” 2-3/8” 2-3/8” 2-3/8” 2-5/8”

5-1/2” 7-1/2” 7-1/2” 9” 9” 9-1/2” 9-1/2” 10” 14” 15” 18” 22” 24”

WEIGHT

PRICE

1.25 lbs.

3.25 lbs.

3 lbs.

3.55 lbs.

3.55 lbs.

4 lbs.

4 lbs.

5.4 lbs.

5.5 lbs.

7 lbs.

7.5 lbs.

8.25 lbs.

10.1 lbs.

$225.00 $275.00 $245.00 $325.00 $265.00 $350.00 $300.00 $325.00 $325.00 $375.00 $375.00 $425.00 $475.00

LIE-NIELSEN LARGE ROUTER PLANE A router plane is a great tool for working shallow mortises - hinge gains, inlay, door locks, trimming tenons etc. This plane is loosely based on an early Stanley model, but with an improved depth stop & adjuster. The 3/8” 0-1 steel blade is held solidly in the ductile iron body in a square broached hole (blades do not fit original Stanleys).

8-1/4” x 3-1/2” x 3-3/4” tall. 1.65 lbs. A closed throat model has more stability planing narrow surfaces.

134131 134194 134132 134177

Lie-Nielsen Large Router Plane $140.00 L-N Closed Throat Large Router Plane $140.00 3/8” Standard Repl. Cutter $35.00 Blade Adapter - Large Router Plane $40.00 (for using the smaller 271 irons in the large router)

LIE-NIELSEN 271 ROUTER PLANE

A radical improvement on Stanley’s classic small router plane.

With its 1/4” square cutter, the ductile iron 271 is perfect for shallow relief work like hinge mortises, lock plates & inlay work. A closed throat model is available for more stability planing narrow surfaces.

134108 Lie-Nielsen 271 Router Plane (2” x4”) $80.00 134193 L-N Closed Throat 271 Router Plane $80.00 Lie-Nielsen 271 Router Plane Replacement Irons 134109 1/4” Square $35.00 134136 3/32” Square $35.00 134134 1/4” Point $35.00 134135 3/32” Point $35.00

LIE-NIELSEN SCRAPING PLANES For almost any finishing job in the shop 1/8” thick irons with 60° bevel & heavy adjustable-angle mount give very smooth, stable operation & take ultra-fine shavings. The small scraping plane is 5-1/2” OAL with 1-3/8” wide iron.

Large model is 9-1/2” OAL with 2-7/8” iron. Optional toothing blades for small planes score surfaces for veneering & smooth & flatten extremely wild grain wood.

434211 434241 434221 434222 434223 434243 434244

L-N Small Bronze Scraping Plane L-N Small Ductile Iron Scraping Plane L-N 1-3/8” Repl. Iron L-N 18 TPI Toothed Iron L-N 25 TPI Toothed Iron L-N Large Ductile Iron Scraping Plane L-N 2-7/8” Repl. Iron

$175.00 $160.00 $25.00 $45.00 $45.00 $235.00 $40.00

LIE-NIELSEN CHISEL PLANES Typically used to clean right up to the end of a rabbet, these bronze planes are great for trimming 12° BED ANGLE pins, tails, through tenons & plugs. Small is 6-1/2” x 1-3/4”. Large is 10” x 2-1/4”.

434215 434217

Lie-Nielsen Small Chisel Plane Lie-Nielsen Large Chisel Plane

$140.00 $199.00

18 GO TO OUR WEBSITE FOR MORE LIE-NIELSEN PLANES & REPLACEMENT IRONS

LIE-NIELSEN NO. 51 SHOOT BOARD PLANE

Planes

NEW

This single-purpose plane is designed to trim miters & other end grain cuts on a shooting board. Stanley first built its version of the plane in 1909 along with a metal shooting board.

Lie-Nielsen’s version of this tool utilizes a standard 2-3/8” Bench Plane Blade & Frog, & is heavier than the original Stanley model, (just over 9lbs.). The shoot board plane is 15” long, 3-9/16” wide, with a shoulder height of 2-1/8”. The frog is skewed to the sole at a 20° angle.

For those lucky enough to possess one of the original Stanley 52 Chute Boards, the Lie-Nielsen No. 51 is designed to fit it correctly. Lie-Nielsen plans to offer a companion Shooting Board in the future. In the meantime, you may download plans to build your own shooting board from our website.

ROSEWOOD PLANE HANDLES A Highland Woodworking Original Design Replace the plastic handles on your iron bench planes with this set made of fine plantationgrown rosewood. The comfortable rear handle is a little larger than factory handles. It fits #5 through #8 Record, Stanley & Bailey-pattern planes, & includes a longer rear handle replacement screw. The 2-3/4” high front knob (screw sold separately) fits most Bailey planes.

105010 Rosewood Plane Handle Set $39.99 (includes rear handle, rear handle screw and front knob) 105013 2-5/8” Front Knob Screw $5.99 105012 Extra 4-3/8” Rear Handle Screw $5.99 PROTECT YOUR PLANES WITH PLANE SACKS, SEE PAGE 69.

LIE-NIELSEN MITER PLANE This ductile iron plane lies on its side as it slides along a shooting board. A side knob in front mounts on either side for right or left handed use. 2” iron, 20° bed angle. 10-3/4” sole. 4-1/2 lbs.

LIE-NIELSEN ADJUSTABLE MOUTH 9-1/2 & 60-1/2 BLOCK PLANES The precisely fitted movable sole plate built into these iron planes lets you set the throat opening where you want it, for heavy work or for controlled finish cuts.

1-3/8” wide irons are 1/8” thick. 6-1/4” long. Ductile iron body & polished bronze iron cap. 1.8 lbs.

LIE-NIELSEN LOW ANGLE SMOOTHING PLANE Modeled on the nearly extinct Stanley 164, this short version of the Low Angle Jack has an adjustable mouth & 2" wide iron set at 12°. 9-1/2” ductile iron body has a unique Bailey style overhead lateral iron adjuster.

LIE-NIELSEN 102 & 103 BLOCK PLANES In these general purpose planes, 1-1/4” wide irons are secured in milled grooves for stability. Depth of cut is adjusted mechanically with stainless steel hardware. OAL 5-1/4”. 1 lb.

134181 Lie-Nielsen No. 51 Shoot Board Plane $500.00

(Right Handed)

434257 434258

434245 434246

Lie-Nielsen Miter Plane L-N Miter Plane Repl. Iron

$375.00 $45.00

L-N Low Angle Smoothing Plane $265.00 L-N Low Angle Smoother Repl. Iron $45.00

LIE-NIELSEN NO. 140 SKEW BLOCK PLANES WITH NICKER These unusual planes features a removable steel side plate that allows quick conversion for use in rabbeting, planing flush along an adjacent surface, or fielding raised panels. The 1-1/2” wide iron, bedded at 12°, is skewed across the front for the cleanest possible shear cutting. An adjustable, removable fence sets width of cut for rabbeting. An A2 round nicker helps eliminate tearout on cross-grain cuts. 6-7/8” long. 2.2 lbs. Available in right & left handed models, with either bronze or ductile iron bodies.

434289

134017

134087

134088

L-N No. 140 Bronze Skew $225.00 Block Plane with Nicker (Right Handed) L-N No. 140 Bronze Skew $225.00 Block Plane with Nicker (Left Handed) L-N No. 140 Ductile Iron Skew $195.00 Block Plane with Nicker (Right Handed) L-N No. 140 Ductile Iron Skew $195.00 Block Plane with Nicker (Left Handed)

STANLEY BLOCK PLANES An adjustable throat on these block planes lets you fine tune your cuts.

The 9-1/2 has a 20° bed angle for general work. 1-5/8” iron.

The 60-1/2’s 13-1/2° bed angle makes very clean cuts on end grain. 1-3/8” iron.

431206 431209 171204 431201 431202 431207

Stanley 9-1/2 Block Plane (OAL 6-3/8”) $44.99 1-5/8” Iron (post-1988, 9-1/2A , 5/8” slot) $9.99 1-5/8” Iron (pre-1988, 9-1/2 , 1/2” slot) $11.99 60-1/2 Block Plane (OAL 7”) $44.99 1-3/8” Iron (pre-1988, 60-1/2 , 1/2” slot) $9.99 1-3/8” Iron (post-1988, 60-1/2A, 5/8” slot) $9.99

434237 L-N Low Angle Adj. Block Plane $165.00 434256 L-N Standard Adj. Block Plane $175.00 134014 Leather Holster for Adj. Block Planes $40.00

434205 134028 434206 134015

L-N Bronze 12° Low Angle Block (102) $115.00 L-N Ductile Iron 12° Low Angle Block (102) $95.00 L-N Bronze 20° Standard Block (103) $125.00 Leather Holster for Block Planes $35.00

LIE-NIELSEN 60-1/2RN RABBET BLOCK PLANE WITH NICKER This low-angle (12°) block plane with open sides has a 1-3/4” wide iron & sole that make it perfect for rabbeting & trimming joints. The nicker helps prevent tear out when cutting across the grain. Ductile iron body w/ polished bronze cap iron. 1-3/4 lbs.

134180

L-N 60-1/2RN Rabbet Block Plane with Nicker

$175.00

LIE-NIELSEN BUTT MORTISE PLANE This specialized tool cuts hinge & strike plate mortises accurately & efficiently; it's faster, quieter & cleaner than using a router. A convex-edge iron sold separately turns the butt mortise plane into a scrub plane for fast, heavy stock removal that leaves an unmistakably hand-tooled look.

9-5/8" x 1-1/2" ductile iron body. 3/4” wide irons.

434231 434240

L-N Butt Mortise Plane L-N Mortise Plane Scrub iron

$110.00 $25.00

LIE-NIELSEN SHOULDER PLANES

Based on the Record 073 The throat adjustment screw housed in the nose is threaded into the body, so it can set the shoulder opening without manual fiddling. The Large Shoulder Plane is 8-1/4” x 1-1/4”.

The Medium plane is 7-3/4” x 3/4”. The Small model is 5-3/4” x 5/8”. Ductile iron bodies.

134110 134069 434247

L-N Small Shoulder Plane L-N Medium Shoulder Plane L-N Large Shoulder Plane

$165.00 $195.00 $250.00

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS 19

Planes & Irons

LIE-NIELSEN REPLACEMENT BLADES for Record & Stanley Planes These irons are impeccably made by Lie-Nielsen from cryogenically treated A-2 tool steel, & perform far better than the original blades on Stanley/Bailey/Record planes. Bench plane blades are .095” thick & unless noted otherwise, block plane blades are 1/8” thick.

434300 L-N Blade - Stanley No. 1 $40.00 434301 L-N Blade - Stanley No. 2 $45.00 434302 L-N Blade - Stanley No. 3, 5-1/4 $45.00 434303 L-N Blade - Stanley No. 4, 5 $45.00 434304 L-N Blade - Stanley No. 6, 7 $55.00 434305 L-N Blade - Stanley No. 8 $60.00 434306 L-N Blade - Stanley No. 10, 10-1/4, 10-1/2 $55.00 L-N Blades for 09-1/2 Stanley Block Plane, 1-5/8” wide iron.

134058 Post 1988, 3 adjusting slots $40.00 134057 Pre 1988, 11 adjusting slots $40.00 L-N Blades for 60-1/2 Stanley Low Angle Block Plane, 1-3/8” wide iron 134056 Post 1988, 3 adjusting slots $40.00 134055 Pre 1988, 11 adjusting slots $40.00 L-N Blades for Specialty Planes 434314 L-N Blade - Stanley 78 (1/8” thick) $35.00 134040 L-N Blade - Record 778 (1/8” thick) $35.00 434313 L-N Blade - Record 073 (.150” thick) $45.00 434307 L-N Blade - Stanley 102 (.110” thick) $35.00 434308 L-N Blade - Stanley 103 (.095” thick) $40.00 434311 L-N Blade - Stanley 95 (1/8” thick) $35.00 434309 L-N Blade - Stanley 140 (1/8” thick) $45.00 434311 L-N Blade for Stanley 95 (1/8’ thick) $35.00

HOCK PLANE IRONS – Prized for excellent hardness, rigidity & edge retention Hock irons are made from ultra finegrained high carbon tool steel, hardened & tempered to Rc62. For the ultimate in durability, Hock’s cryogenically treated A-2 tool steel irons are significantly tougher & more wear resistant than their own high carbon blades.

Plane irons are identified by the iron width & the width of its lateral adjustment slot. Measure your original carefully to be sure you order an iron that will work in your plane.

HOCK PLANE IRONS HC=High Carbon Steel CRYO=A2 Cryogenically Conditioned

Hock Plane Iron 1-3/4” Bench 2” Bench 2-3/8” Bench 2-5/8” Bench 1-1/2” Scrub 2-1/8” No. 10 Rabbet 1-3/8” Block (7/16” slot) 1-5/8” Block (7/16” slot) 1-3/8” Block (5/8” slot) 1-5/8” Block (5/8” slot)

HC 122521 $35.99 122522 $37.99 122525 $39.99 122526 $42.99 122527 $39.99 122528 $47.99 122514 $31.99 122507 $34.99 122510 $31.99 122515 $34.99

CRYO 122541 $46.99 122542 $47.99 122543 $48.99 122544 $49.99 122545 122546 122547 122548

$44.99 $46.99 $44.99 $46.99

HOCK CHIPBREAKERS Thick (.118”) accurately machined chipbreakers are slightly sprung to make tight contact with the back of the blade. Includes a longer knurled cap screw.

122550 122551 122552 122553

1-3/4” Chipbreaker (fits #3 planes) $25.99 2” Chipbreaker (fits #4 & #5 planes) $27.99 2-3/8” Chipbreaker (fits #6 & #7 planes) $29.99 2-5/8” Chipbreaker (fits #8 planes) $37.99

CLIFTON 400 RABBET TRIM PLANE This little bullnose rabbet plane is finely crafted with carefully machined & polished castings.

Its’ iron is held in place by a rosewood wedge (adjusted by hammer), & the narrow throat opening makes for minimal tearout. 7/16” x 3-1/4” long. 5-1/2 oz.

431161 431162

Clifton 400 Rabbet Plane Replacement 400 Iron

$99.99 $29.99

IMPERIAL BLADES for Fein Multimaster & other multi-tools If you love your Fein Multimaster Tool, but squirm at the cost of Fein’s blade accessories, Imperial blades are made just for you.

Proudly made in USA, these blades fit the Fein Multimaster, Bosch Mulit-X, Dremel Multi-Max, Chicago Multi-Tool, & Craftsman Multi-Tool. Imperial blades offer high quality at a significant savings. Storm blades are Titanium-Nitride coated for longer life.

371001 1-1/4” Fine Blade $12.99 371003 1-1/4” Fine Blade, 3 pk $28.99 371010 1-1/4” Fine Blade, 10 pk $89.99 371101 3/4” Fine Blade $12.99 371103 3/4” Fine Blade, 3 pk $28.99 371110 3/4” Fine Blade, 10 pk $89.99 371201 3/8” Fine Blade $12.99 371203 3/8” Fine Blade, 3 pk $28.99 371210 3/8” Fine Blade, 10 pk $89.99 371501 2-1/2” Fine Blade $14.99 371503 2-1/2” Fine Blade, 3 pk $32.99 371510 2-1/2” Fine Blade, 10 pk $99.99 372001 1-1/4” Coarse Blade $12.99 372003 1-1/4” Coarse Blade, 3 pk $28.99 372010 1-1/4” Coarse Blade, 10 pk $89.99 372501 2-1/2” Coarse Blade $14.99 372503 2-1/2” Coarse Blade, 3 pk $32.99 372510 2-1/2” Coarse Blade, 10 pk $99.99 373001 1-1/4” Bi Metal Blade $15.99 373003 1-1/4” Bi Metal Blade, 3 pk $34.99 373010 1-1/4” Bi Metal Blade, 10 pk $109.99 374101 3” HSS Segment Blade $34.99 374103 3” HSS Segment Blade, 3 pk $89.99 375101 Flexible Scraper $9.99 375103 Flexible Scraper, 3 pk $24.99 376401 1-1/4” Carbide Grout Blade $24.99 376403 1-1/4” Carbide Grout Blade, 3 pk $56.99 376410 1-1/4” Carbide Grout Blade, 10 pk $182.99 377301 Diamond Grout Boot Blade $59.99 377303 Diamond Grout Boot Blade, 3 pk $162.99 370003 Set of 3 $36.99

Imperial Blades (1-1/4” Coarse, 2-1/2” Fine &

1-1/4” Universal Bi Metal) 373401 Storm 1-3/4” TiN Universal Bi Metal Blade $18.99 373403 Storm 1-3/4” TiN Univ. Bi Metal, 3 pk $42.99 373410 Storm 1-3/4”TiN Univ. Bi Metal, 10 pk $129.99

KUNZ PLUS BENCH PLANES

An exciting realm of design & craftsmanship for the hand tool enthusiast.

Precisely milled from durable ductile iron, these planes have blade adjusters based on the Norris “A style planes, with a single post & barrel-style nuts for smooth depth of cut & lateral positioning control. An adjustable frog helps reduce tearout. Rc60-62 1/8” thick iron.

Brass lever cap & blade adjuster. European cherry knobs.

179819 179820

Kunz Plus #4 Smooth Plane (4 lbs.) $199.99 Kunz Plus #5 Jack Plane (5 lbs.) $229.99

433925 433926 433927

Palm Plane w/Handle $19.99 Palm Plane, no Handle Palm Plane Replacement Iron

KUNZ PALM PLANES Just 3-5/16” OAL, these little planes handle the jobs too small for your other planes. 15/16” wide iron.

$18.99 $5.99

CLIFTON 3-IN-1 SHOULDER RABBET PLANE This popular plane performs the work of 3!

Use it as a rabbet plane (up to 1-1/8” wide), a bullnose plane for close work into flush corners, & a chisel plane for working right up to adjacent surfaces.

431124 431125

Clifton 3-in-1 Plane Replacement 3-in-1 Iron

$299.99 $29.99

20 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Fein Multimaster Tool

For professional and home renovations and repair work, the Multimaster is the tool you need.

This professional quality, multi-function tool has an industrial rated 2.3 amp, VS motor that provides an oscillating motion from speeds of 11,000-20,000 opm. It will sand, scrape, grind, plunge cut, flush cut & trim cut wood, metal, tile, plastic & other materials. All 3 models weigh 3 lbs., have 16’ cords & feature the Quickin Rapid Lever Clamp system for tool-free accessory changes.

UNIVERSAL E-CUT SAW BLADE Cut metal up to 1/16” thick as well as wood, drywall, fiberglass and other soft materials.

636047 636048 636091 636092

1-1/8” Universal E-Cut Blade $15.99 1-1/8” Universal E-Cut, 3 pk $36.99 1-3/4” Universal E-Cut Blade $15.99 1-3/4” Universal E-Cut, 3 pk $36.99

PRECISION E-CUT SAW BLADES Japanese-style coarse tooth pattern for fast cuts in wood or other soft materials.

Offset blades for flush cutting.

636030 636049 636031 636050

1-3/8” Precision E-Cut Blade 1-3/8” Precision E-Cut, 3 pk 2-1/2” Precision E-Cut Blade 2-1/2” Precision E-Cut, 3 pk

$13.99 $34.99 $16.99 $42.99

636038 636051 636039 636052

1-3/8” Standard E-Cut Blade $16.99 1-3/8” Standard E-Cut, 3 pk $37.99 2-1/2” Standard E-Cut Blade 2-1/2” Standard E-Cut, 3 pk

$17.99 $39.99

636041 636043 636042 636044

3/8” MiniCut Blades, 2 pk 3/8” HSS MiniCut Blades, 2 pk 3/4” MiniCut Blades, 2 pk 3/4” HSS MiniCut Blades, 2 pk

$15.99 $21.99 $15.99 $22.99

STANDARD E-CUT SAW BLADES Fine tooth pattern for slow, more precise cuts in wood. Offset blades for flush cutting.

REPLACEMENT MINICUT BLADES for MiniCut & File Set (636078) Tool steel cuts wood or other soft materials.

HSS blades cut metal & last longer when cutting wood.

636071 Fein Multimaster Pro Flooring Kit $99.99 1-3/8” Standard E-Cut Blade, 2-1/2” Standard E-Cut Blade, 2-1/2” Precision E-Cut Blade, Carbide Rasp, Convex Knife Blade, & Rigid Offset Scraper 636078 Fein MiniCut & File Set $39.99 3/8” MiniCut Blade, 3/4” MiniCut Blade, 3/8” HSS MiniCut Blade, 3/4” HSS MiniCut Blade, 3/4” Diamond File, 3/4” Carbide File, 15° Sharpening Jig & Mounting Hardware 636070 Fein Multimaster Wood Kit $99.99 1-3/8” Standard E-Cut Blade, 2-1/2” Standard E-Cut Blade, 1-1/8” Universal E-Cut Blade, Sanding Pad & 1 each of 60X & 120X 5-Pack Sanding Triangles

CONVEX & CONCAVE SEGMENT KNIFE BLADES The convex knife cuts rigid materials like linoleum, leather, carpet, cardboard or wire mesh. The concave knife is for softer materials such as polystyrene.

636027 636058

636020 636019

2” Convex Segment Knife Blade 2” Concave Segment Knife Blade

$13.99 $15.99

OFFSET SCRAPER BLADES Remove paint, carpet & label adhesive & flexible caulking.

2” Rigid Offset Scraper Blade 2” Flexible Scraper Blades, 2 pk

TRIANGULAR SANDING PADS 2 Packs. 3-1/8” on a side, for H&L paper.

$10.99 $28.99

636066 Fein H & L Dust Free Sanding Pads, 2 pk $28.99 636227 50-pc. H & L Perforated Sandpaper Assort. $29.99

(10 each of 60, 80, 120, 180 & 240 grit)

101699 Multimaster FMM 250 Start Q $199.00 FMM250Q, H&L Sanding Pad, 20 pc Sandpaper Assort., 1-3/4” Universal E-Cut Blade, 2” Rigid Offset Scraper Blade, Quick Release Mounting Screw & Nylon Carry Case 101801 Multimaster FMM 250Q Top $299.00 FMM250Q, 2 H&L Sanding Pads (1 perf &1 solid), 40 pc Sandpaper Assort., 2” Rigid Offset Scraper Blade, 3-1/8” HSS Segment Saw Blade, Carbide Rasp, 1-3/8” M-Cut Blade, 1-3/8” E-Cut Blade, 2-1/16” E-Cut Blade, 10mm M-Cut Blade, 4-1/2” Round Sanding Pad with Abrasive Assort., Dust Extractor & Rugged Plastic Carrying Case

HIGH SPEED STEEL SAW BLADES HSS blades last longer & can cut harder materials than regular tool steel.

636054 636035 636015 636016 636017 636056 636084 636024 636089

2-1/2” HSS Saw Blade 2-1/2” HSS Saw, 2 pk 3-1/8” HSS Round Blade 3-1/8” HSS Round, 2 pk 3-1/8” HSS Segment Blade 3-1/8” HSS Segment, 2 pk 3-1/8” HSS Segment, 5 pk 3-9/16” HSS Flush Cut Blade 3-9/16” HSSFlush Cut, 5 pk

$12.99 $22.99 $28.99 $51.99 $12.99 $22.99 $49.99 $36.99 $169.99

636026

3-1/8” Flush-Cut Segment Blade

SEGMENT SAW BLADE Tiny oscillations make this blade safe to handle. Cuts wood quickly & precisely. Center is depressed for flush cutting. Flat side cuts in corners.

$6.99

CARBIDE GROUT BLADES Plunge-cuts plaster & removes grout between tiles. Flat sided Segment blade cuts corners & adjoining surfaces without over-cutting.

636059 636061 636062

1/16” Carbide Grout Blade $24.99 5/32” Carbide Grout Blade $29.99 5/64” Segment Carbide Grout Blade $25.99

DIAMOND BLADES Used for the same purpose as carbide blades but much more durable.

636018 2-1/2” Diamond Blade $64.99 636045 2-1/2” Diamond Flush-Cut Segment Blade $64.99

CARBIDE RASPS Up to 5 times faster than 40X sandpaper.

636028 636046

Carbide Rasp $24.99 2-Sided Carbide Finger Rasp $26.99

TRIANGULAR FELT POLISHING PADS 2 Packs. 3-1/8” on a side. Pads are 7/16” thick.

636014

60 Grit 80 Grit 100 Grit 120 Grit 150 Grit 180 Grit 220 Grit 240 Grit

Felt Polishing Pads, 2 pk

Fein Perforated Sandpaper $8.99 5 pk $29.99 box of 50 636203 636216 636204 636217 636205 636218 636206 636219 636207 636220 636208 636221 636209 636222 636210 636223

$44.99

Finger Paper $14.99 20 pk 636F60 636F80 636F12 636F18 636F24

FEIN SANDING FINGERS Narrow single sided pads reach beyond the nose of the tool for access into tight narrow places.

636065 1/4” Thick H&L Sanding Fingers, 2 pk $26.99

GO TO OUR WEBSITE FOR A FULL SELECTION OF FEIN MULTIMASTER ACCESSORIES 21

Chisels

STANLEY SWEETHEART BEVEL EDGED SOCKET CHISELS Based on Stanley’s classic 750 Series, these nicely balanced chisels are manufactured high carbon chrome steel. Their thin bevel edges MADE IN ENGLAND allow them to reach into tight areas & their durable hornbeam handles are easy to grip & nestle comfortably into the palm. OAL 8-1/2” – 10-1/8”, with a chisel/socket tang length of 5-1/8” to 6-3/4”. 1-5/32” dia. 171231 1/8” $31.99 171235 5/6” $33.99 171232 1/4” $32.99 171236 3/4” $34.99 handles are 3-3/8” long (not including socket tenon). * * 171240 Set of 8 Stanley SW Chisels w/8 Pocket Leather Tool Roll $229.99 171233 3/8” $32.99 171237 1”* $35.99 171239 Set of 4 Stanley SW Chisels w/4 Pocket Leather Tool Roll * $129.99 171234 1/2” $33.99 171238 1-1/4” $36.99

NAREX CHISELS

Fine-grained, nicely tempered chrome-manganese steel blades, (Rc 58-59), take & hold a keen edge without brittleness. Hardwood handles. Sharpen before use.

IC

E

AUT

The Narex Bevel Edge Bench Chisel is our most popular style of chisel and will handle a variety of R’S E HO tasks. They are an exceptional valU L VA ue. A steel ferrule on the handle T S end adds durability. Set of 6 comes BE C H O in a fitted wooden box. STANDARD The cross section of PREMIUM the Narex Premium Bench Chisels has a slimmer edge, making paring into tight areas easier.

Dark stained round handle has a brass ferrule.

Narex Mortise Chisels have stout full profile blades.

A heavy steel ferrule reinforces the end of the ovate shaped handle. The factory ground bevel is ~25°.

NAREX BEVEL EDGE BENCH CHISELS (OAL ~10-1/2”) 146099 3mm $7.50 146013 18mm $7.99 146001 6mm $7.50 146006 20mm $7.99 146002 8mm $7.50 146015 26mm $8.99 146003 10mm $7.50 146008 32mm $11.99 146004 12mm $7.50 146016 40mm $12.99 146005 16mm $7.99 146010 50mm $19.99 146011 Set of 4 Narex Bench Chisels $26.99 (6, 12, 20 & 26mm) 146012 Boxed Narex 6-Piece Bench Set $59.99 (6, 10, 12, 16, 20 & 26mm) 146048 Set of 2 Narex 20mm Skew Chisels (32°) $29.99 NAREX PREMIUM BEVEL EDGE CHISELS (OAL ~10-1/2”) 148001 6mm $13.99 148007 20mm $14.99 148002 8mm $13.99 148008 26mm $16.99 148003 10mm $13.99 148009 32mm $18.99 148004 12mm $13.99 148010 40mm $19.99 148005 16mm $14.99 148011 50mm $26.99 148006 18mm $14.99 148012 Narex Premium 6-Piece Bench Chisel $129.99

Set with Leather Tool Roll 6mm (~1/4”), 10mm (~3/8”), 12mm (~1/2”), 16mm (~5/8”), 20mm (~3/4”) & 26mm (~1”)

NAREX MORTISE CHISELS (OAL ~ 11”) 146039 4mm $12.99 146019 10mm $16.99 146041 5mm $12.99 146042 12mm $17.99 146017 6mm $12.99 146043 14mm $18.99 146018 8mm $14.99 146044 16mm $19.99 146020 Set of 3 Narex Mortise Chisels (6, 8 &10mm) $39.99 146049 Set of 5 Narex Chisels (4, 6, 8, 10 & 12mm) $64.99 146045 Narex 10mm Corner Chisel $29.99

KUMAGORO JAPANESE CHISELS

Ice Bear

These are excellent general purpose butt chisels, made for fine carpentry, cabinetmaking & joinery.

These butt chisels have durable hand forged, laminated, bevel-edged blades. Red oak handles with iron hoops withstand heavy use, 3-3/4” handles; OAL approx. 9”. Set of 6 (6, 9, 12, 18, 24 & 30mm) comes with a large leather tool roll with 9 extra pockets.

146624

Set of 6 Kumagoro Chisels

146611 1.5mm $29.99 146615 12mm 146612 3mm $29.99 146617 18mm 146613 6mm $31.99 146619 24mm 146614 9mm $32.99 146620 30mm

$229.99 $34.99 $38.99 $43.99 $45.99

HAND FORGED IN USA

*

BARR FRAMING CHISELS Whether you’re a timber framer, sculptor, woodworker or a log Made house builder, Barr Framto last ing chisels will get the through job done. Blades (Rc years of 62), are at least 5/16” thick heavy work over most of their length. Tightly fitted ash handles are hooped with 1/8” thick steel ferrules. The flat section of each blade is 7-1/2” long; OAL 16-1/2”.

471147 471148 471149

1” Barr Framing Chisel 1-1/2” Barr Framing Chisel 2” Barr Framing Chisel

$129.99 $129.99 $129.99

LIE-NIELSEN SOCKET CHISELS Based on Stanley’s legendary 750 socket chisels, these LieNielsen chisels are BEVEL EDGE SOCKET SET made of cryogenically treated A-2 tool steel. The steel is hard (Rc 60-62) without being brittle, takes a very fine edge and holds it well so you can work longer between sharpenings.

9” long Bevel Edge Chisels have their sides ground close to the back of the tool so they can pare dovetails without crushing the inside corners.

The 9-1/2” long Mortise Chisels give more heft & guidance when chopping mortises.

MORTISE Hornbeam handles.

SOCKET CHISELS L-N Bevel Edge Socket Chisels 134059 1/8” $70.00 134075 7/16” $55.00 134073 3/16” $55.00 134062 1/2” $55.00 134060 1/4” $55.00 134076 5/8” $55.00 134074 5/16” $55.00 134063 3/4” $55.00 134061 3/8” $55.00 134138 1” $70.00 134020 Set of 5 Bevel Edge Socket Chisels $340.00 (3/16”, 1/4”, 3/8”, 1/2”, 3/4” & leather tool roll) 134083 1/4” L-N Mortise Socket Chisel $65.00 134086 1/2” L-N Mortise Socket Chisel $65.00 134081 Set of 5 Mortise Socket Chisels $390.00 (3/16”, 1/4”, 5/16”, 3/8”, 1/2” & leather tool roll)

HIRSCH BEVEL EDGED CHISELS Octagonal hornbeam handles, steel ferrules & impact cap, & highly polished thin-section blades of high quality tool steel have made Hirsch chisels the favorites of woodworkers worldwide. Blades are 5 to 6” long (Rc 61). OAL 10 to 13”.

449701 449702 449703 449704

449710 2mm ~3/32” 6mm ~1/4” 10mm ~3/8” 12mm ~1/2”

Set of 4 (6, 12, 20 & 26mm) $24.99 449705 16mm ~5/8” $24.99 449706 20mm ~13/16” $24.99 449707 26mm ~1” $24.99

$99.99 $24.99 $25.99 $30.99

AUTOMATIC CORNER CHISEL This spring-loaded fixture quickly squares the corners of routed mortises (up to 7/16” deep, & as small as 1-1/16” square). Simply snug it into the corner of your mortise (max. 3/8” radius) & tap it with a hammer, instantly cutting a 90° outline. Blade removes easily for resharpening.

445312

Automatic Corner Chisel

$9.99

22 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

FLEXCUT CASH BACK COUPONS!

$5 off $50 & $10 off $100 on any Flexcut Tool purchase.

Offer expires July 2013. See our website for coupons & details.

Flexcut Carving Tools

Made from high-quality spring steel, Flexcut carving tools have a pleasant degree of flexibility allowing them to bend through a cut, feeling remarkably natural & controllable.

FLEXCUT CRAFT CARVER SETS slightly They come razor sharp & are easily maintained by polishing with interchangeable blades on a leather strop. Comfortable sculpted ash wood handles These creative sets offer a very are nicely finished.

economical variety of essential hand carving tools. Sets include a sculpted nylon palm-style handle which securely holds the Flexcut carving blades. Though they’re held rigidly, blades remove easily by gripping between thumb & forefinger. In use, you vcan’t tell you’re not working with a singlepurpose dedicated tool. Sets include 11-pocket tool roll & basswood practice blank with a stenciled design.

125140 5-Pc. Flexcut Craft Carver Set $49.99 (3/8” #3 Gouge, 5/16” #6 Gouge, 1.5mm #9 Veiner & 1/4” 70° V-gouge) 125141 11-Pc. Craft Carver Set $97.99 (Includes all the tools in 125140 & 5/8” #3 Gouge, 9/16” #5 Gouge, 1/8” & 1/4” #11 Gouges, 1mm 45° V-Gouge & 1/4” Straight Chisel)

FLEXCUT BOXED 21-PIECE CARVING SET The perfect high quality beginner’s carving set!

This set has a whittling knife & 16 of the most useful tool profiles that quickly interchange between 2 handles. A small contoured plastic handle fits comfortably in your palm & a larger wooden handle has a longer, more traditional shape for 2-handed use. Includes SlipStrop & honing compound.

125299

Flexcut SK108 $197.99 Boxed 21-Pc. Starter Carving Set 1/4” & 7/8” #3, 1/8” #5, 1/2” #6, 1/4”, 3/8” & 11/16” #8, 9/16” #2 Skew, 9/16” #9 & 1/16” #11 Straight Gouges, 7/8” #4 Back Bent Gouge, 5/32” 45° Parting Tool, 3/8” 70° Parting Tool, 5/8” #1 Chisel, 3/16” & 1/2” #11 Thumbnail Gouges, all in fitted wooden box

FLEXCUT DETAIL KNIFE SET Mini versions of Flexcut’s standard carving knives Set of 3 has slimmer, comfortable 4-3/8” long sculpted wood handles.

125443

Includes Flexcut Gold honing compound

Flexcut Detail Knife Set (7/8” Pelican, 21/32” Chip & 11/16” Detail w/slim handles) $65.99

FLEXCUT 3 KNIFE STARTER SET Standard carving knives with 5” handles 125451 Flexcut 3 Knife Starter Set (2” Roughing, 1-1/8” Cutting & 1-1/2” Fine Point Detail)

FLEXCUT WHITTLER’S KIT Include 2 straight blade whittling/carving knives

125442

Flexcut Whittler’s Kit (1-3/8” Detail w/5” handle & 11/16” Mini Detail w/4-3/8” handle) $43.99

FLEXCUT CARVIN’ JACK A complete carving kit that fits in your pocket!

All 6 tools (detail knife, hook knife, straight gouge, v-scorp, gouge scorp & chisel) are made of Flexcut’s high quality carbon steel. The Carvin’ Jack includes multi-form honing block, honing compound & leather sheath with snap closure & belt loop.

125195 Flexcut Carvin’ Jack $142.99 125196 Left Hand Carvin’ Jack $142.99 Choose the standard model if you are right handed & carve with the blade towards you. If you carve away from yourself, choose LH model. Left-handers should choose the inverse.

FLEXCUT™ CHIP WHITTLING & CARVING KNIVES ROUGHING Flexcut makes fine knives for whittling CUTTING & chip carving. Like their carving tools, they boast ergonomic, nicely finished 5” DETAIL ash handles & honed spring steel blades.

The Chip Carving Knife blade is short SKEW & stout, with a wide back for comfortable thumb pressure. The Roughing Knife blade is long & thick for heavy work. The Cutting Knife has a mediumlength straight blade; it is a fine general-purpose whittling knife. The Detail Knife is slender enough for deep detail & tight curves. The Skew Knife is ideal for incising crisp details & deep, sharp lines.

The curved Pelican Knife (shown) is ideal for slicing & whittling.

125055 125035 125010 125005 125009 125151

Flexcut 1” Chip Carving Knife Flexcut 2” Roughing Knife Flexcut 1-1/8” Cutting Knife Flexcut 1-1/2” Detail Knife Flexcut 5/8” Skew Knife Flexcut 1-5/8” Pelican Knife

$19.99 $21.99 $18.99 $19.99 $16.99 $23.99

FLEXCUT GOLD™ STROPPING COMPOUND Polishes to a high shine & a razor edge Apply this fast-cutting polishing compound to leather strops, buffing wheels or customshaped wood strops as easily as using a crayon.

129018

$52.99

Flexcut Gold Stropping Compound

$6.99

FLEXCUT™ BOXED MALLET CHISEL SETS These fine sets include a selection of Flexcut’s most popular mallet chisel profiles. 5” octagonal handles & 4-1/2” long blades. Sets come in a fitted wooden box with a sliding cover.

125017 6-Pc. Flexcut Mallet Tool Boxed Set $157.99 (1” #3, 11/16” #5, 7/16” #7, 9/16” #10, & 1/4” #11 Straight Gouges & 3/8” 60° V-Gouge) 125044 10-Pc. Flexcut Mallet Tool Boxed Set $274.99 (1/2” #3, 1” #3, 1-3/16” #5, 11/16” #7, 1/2” #9, 3/4” #10, 1/8” #11 & 1/4” #11 Straight Gouges, 3/16” 45° V-Gouge, & 1/2” 60° V-Gouge) 125137 4-Pc. Flexcut Sculpture Boxed Set $137.99 (2” #3, 1-3/8” #5 & 1-1/8” #10 Straight Gouges, & 1-3/8” 90° V-Gouge)

See our full line of Flexcut Mallet Chisels on our website.

FLEXCUT™ BOXED PALM CHISEL SETS Chisels in Flexcut Palm Chisel Sets are 5“ long & have 3” blades. Sets come in a fitted wooden box.

125001 5-Pc. Palm Chisel Set $75.99 (5/16” #2 Double-Bevel Skew, 3/8” #3 Gouge, 5/16” #6 Gouge, 1/8” #11 Veiner & 1/4” 70° V-Tool) 125128 4-Pc. Wide Format Palm Chisel Set $64.99 (5/8” #3 Gouge, 9/16” #5 Gouge, 3/8” #8 Gouge & 3/8” 70° V-Gouge) 125139 9-Pc. Deluxe Palm Chisel Set $142.99 (Includes all the tools in 125001 & 125128) 125125 4-Pc. Micro Palm Chisel Set $68.99 (2.5mm #5 Gouge, 1mm #9 Gouge, 1.5mm #9 Gouge & 1mm #45 V-Gouge)

See all of Flexcut’s Palm Chisel profiles on our website.

FLEXCUT SLIP STROP A simple 3-1/4” x 4” wood block with 10 stropping surfaces: a flat & a curved leather surface, wide & narrow flutes, 45° & 65° ridges for V gouges, & 1/16”, 1/8”, 1/4” & 1/2” beads for gouge flutes.

125100

Flexcut Slip Strop $13.99 (Includes 1-1/2 oz. bar Flexcut Gold™)

GO TO OUR WEBSITE TO SEE A FULL LINE OF HIRSCH PREMIUM CARVING TOOLS 23

Carving Tools

NAREX STARTER CARVING SET This beginning carver set includes 5 hardened, carbon steel blades mounted in 4-1/4” beech wood handles. OAL 6-1/4”. Includes a 6-1/2” x 3-3/16” x 1-3/8” block of carving wood. Hone before use.

NEW!

147107 Narex Starter Carving Set $49.99

8mm V-tool, 5mm deep gouge, 9mm medium gouge,

11mm shallow gouge, & 12mm skew chisel

SMALL CARVING SET This popular set of 6 tools (~ 7” OAL) is extremely well made of the finest Sheffield steel. They are particularly suited for fine cutting & small work.

121105 6 Piece Carving Set $64.99 5/16” skew, square & bent square chisels, 3/16” straight gouge, 5/16” bent gouge & 3/16” bent V tool

WHITTLING KNIFE This basic whittling knife with 1-3/4” long high carbon steel blade is our single most popular carving knife. Uniquely shaped hardwood handle is especially comfortable in the hand. 6-3/4” long.

126603

Whittling Knife

$14.99

MILL KNIFE This nicely made utility knife has a large 4-5/8” long non-rusting metal handle inset with walnut. 3 blades, (6-1/2” x 3/4” bevel point, 6-1/2” x 3/4” curved point, & 9” x 3/4” sharp point), lock with a set screw.

126606 126607 126608 126609

Mill Knife Spare Bevel Blade Spare Curved Blade Spare Sharp Point Blade

FROSTS SWEDISH HOOK KNIVES These unique hook knives are ideal for carving cups & bowls, ladles, & other deeply hollowed work. No.’s 162 & 163 have double-edge blades with sharp, square ends; 164 blade is sharp on one edge & comes to a point. Hardwood handles, steel ferrules & fine steel blades.

126003 126016 126017

SLOYD KNIVES

126611 126612 126613 126614

Frosts 162 Hook Knife Frosts 163 Hook Knife Frosts 164 Hook Knife

$46.99 $6.99 $16.99 $7.50

162 163 164

$34.99 $34.99 $34.99

These traditional Swedish knives for general purpose carving and whittling have Chrome Vanadium steel blades & ferruled hardwood handles. OAL is 6” to 7”.

Sloyd Knife with1-3/4” Long Blade Sloyd Knife with 2-5/8” Long Blade Sloyd Knife with 3” Long Blade Set of 3 Sloyd Knives

$9.99 $11.50 $11.50 $29.99

ADJUSTABLE KNIFE This beautiful & versatile knife has a solid brass handle with rosewood inserts.

The highly polished 6” x 1/2” blade slides into the handle & adjusts to any length, locking with a set screw.

126604 126605

Adjustable Knife Replacement Blade

$49.99 $8.50

An outstanding resource!

300 CLASSIC FURNITURE CARVING PATTERNS Acanthus leaves, vines, borders, shells, shields, scrolls, flowers, filigrees— they’re all represented in endless variety in this enormously comprehensive collection.

Patterns are shown full size in shaded pencil drawings, many with section lines indicating profiles for depth of relief. Drawings are on 23” x 16-1/2” folded sheets of heavy gloss stock, suitable for photocopying or for pouncing. All in a durable snap-closed case.

201922

300 Carving Patterns

$119.99

WAYNE BARTON CHIP CARVING TOOLS

Chip carving (geometric pattern relief carving) is decorative, quick, easy to learn, & pleasantly inexpensive to start.

Wayne Barton, America’s best-known authority on chip carving, recommends 2 high quality Swiss knives: a cutting knife for most of the work, & a stab knife for decorating & enhancing the work. Hard, fine-grained blades have large, comfortable hardwood handles. He recommends ceramic sharpening stones to keep your knives in perfect condition.

125904 125902

Pair Premiere Barton Knives $69.99 Pair of Ceramic Stones (1-3/4” x 4”) $69.99

DENIM TOOL ROLL Protect your valuable carving tools and chisels with this 12 pocket heavy denim tool roll.

Metal D-rings secure the tie.

Well made with close, sturdy stitching.

126412

12-Pocket Tool Roll (22” x 12”) $16.99

LEATHER TOOL ROLL This sturdy leather tool roll uses the soft side of the pelt. It protects chisel edges from impact damage & helps prevent rust incursion. It will protect tools up to 12” long in its 17 pockets, 2 of which are 5” wide to fit odd-shaped tools like squares. A lanyard closure attaches through a grommet hole, making it easy to hang for convenient access at the worksite. 13” x 23”.

126415

Large Leather Tool Roll

$29.99

BRASS CARVER’S MALLET This compact 2lb. mallet delivers powerful blows to drive your chisels & carving tools with short, efficient strokes. Comfortable contoured hardwood handle. 1-7/8” dia. x 3-3/8” long brass head.

135121

Brass Carver’s Mallet (OAL 9”) $36.99

WOODEN CARVING MALLETS Traditional round wooden carver’s mallets.

146075 Small Mallet (10-1/2 oz. OAL 9-3/4”) $21.99 146076 Large Mallet (27 oz. OAL 12”) $26.99

POLYURETHANE CARVING MALLET The strong, dense composition material on this mallet causes less bounce & less noise than wooden mallet heads. Head dia. 3-3/8”.

OAL 10-1/2”. Weighs 18 oz.

172806 Polyurethane Carving Mallet

$19.99

HOCK CARVING KNIVES – Hock Tools, known for their high quality tool-steel plane irons,

has created a line of handmade carving knives.

HOCK CARVING KNIVES $29.99 each These nicely crafted knives, with their finegrained, high carbon steel blades (Rc62) take & 122561 Small Detail Knife 1/4” x 1” hold a keen edge exceptionally well. Handsome 122562 Carving Knife 3/8” x 1-1/4” bubinga wood handles have a gentle, curved shape 122563 Detail Knife 5/16” x 1-1/4” & an oil finish to provide a comfortable grip. Use 122564 Chip Carving Knife 1/4” x 1” a leather strop to hone edges. OAL approx. 6”.

122565 Stab Knife 1/2” x 11/16”

24 SEE MORE FLEXCUT CARVING TOOLS AT HIGHLANDWOODWORKING.COM

Power Carving

FOREDOM POWER TOOLS

We offer 4 flexible shaft Foredom tools.

Models 5240 & 5200 have 1/6 HP reversible motors with a speed range of 0-18,000 RPM. The more powerful 5400 & TXH440 models are 1/3 HP & 0-15,000 RPM. All 4 models have ball-bearing, hang-up style motors & include a 2-year warranty on the motor & control.

Model 5240 features a 36” flexible shaft, electronic foot-operated speed control & Model 44T handpiece (5-5/8” long with 1” dia. center & 3/4” dia. nose taper) with collet chuck. It comes with 1/8”, 3/32”, & 1/4” collets & a 47-piece assortment of cutters, sanding discs, bristle discs, Typhoon burrs & more.

Model 5200 includes the same collets as the 5240.

It comes with a model 28 light-weight handpiece as well as the model 44T handpiece & safety glasses.

5240 & 5200 model kits include a rotating burr & bit stand to handle all size shank accessories, a collet pin & wrench, flexible shaft grease & carving manual.

Model 5400 has the powerful TX 1/3 HP motor & a cast iron foot control for greater stability. This kit includes the 44T handpiece with 1/8”, 3/32” & 1/4” collets, a 12-pc bit set, collet pin, wrench & carving manual.

Model TXH440 Industrial is a heavy duty version of the TX motor with an extra rugged shaft & sheath & a special sturdy 44HT handpiece, exclusive to this motor. The kit includes a cast iron foot control, a 10-piece bit set, collet pin & wrench & spare motor brushes.

Foredom’s Model 30 handpiece features a geared drill-type chuck which handles accessory shanks up to 5/32” dia. The Model 28 ultralight handpiece is 5-3/8” long, with a tapered nose (1/2” dia.) for comfortable grip & precise control. Includes 3/32” & 1/8” collets.

A Detachable Hanger with clamp-on base mounts on surfaces up to 1-3/4” thick. Maintenance Kits have a spare inner shaft, lubricant & pair of motor brushes.

5240 5200

5400 128432 128013 128011 128155 128033 128007

Reversible Model SR Kit $269.99 Deluxe Woodcarving Kit $349.99 (Includes Model 28 & 44T Handpieces) Model TX 1/3 HP Kit $329.99 Model TXH Heavy-Duty 1/3 HP Kit $359.99 Model 30 Geared Chuck Handpiece $59.99 Model 28 Lightweight Handpiece $59.99 Maintenance Kit (1/6 HP SR motors) $17.99 Maintenance Kit (1/8 HP SR motors) $18.99 Detachable Clamp-On Hanger $39.99

Visit our website for our selection of Dremel High Speed Cutters

FLEXIBLE SHAFT RECIPROCATING POWER CARVING Uses Flexcut ATTACHMENT

Power Carving Blades

for Dremel Tools

Turn your Dremel tool into a reciprocating power carver with this affordable flex shaft tool

The 44” shaft is delightfully flexible, & its slender 5” handpiece is comfortable & well balanced.

Blades are stationary until pressed against your work, where their high speed reciprocating action cuts smoothly and easily. Includes mounting adapter, wrench, & 5 blades: 3/8” deep gouge, 5/32” & 3/8” straight chisels, 3/8” round nose & 1/4” V gouge.

Used with Flexcut power carving blades (below), it gives you all the variety, quality & speed that a good power carver should have. We recommend white lithium grease to lubricate shafts.

128501 8726382

Flex Shaft Power Carver (Dremel) $49.99 White Lithium Grease (1.25 oz.) $2.59

FLEXCUT BLADES FOR POWER CARVERS

These fine blades bring Flexcut's outstanding performance to reciprocating carving tools by Proxxon, Ryobi, Auto Mach, & our flexible shaft carver (above). Blades arrive razor sharp, & can be maintained by regular polishing with a Power Strop (page 12).

Go unplugged. Use your power gouge chisels with this 3-1/2” ash handle. 1/2” collect nut secures bits.

125008 Power Roughing Gouge Set $39.99

(9/16”, 5/8” & 3/8” gouges & 3/8” V-gouge) 125003 Power Detailing Gouge Set $35.99

(3/8” & 5/16” gouge, 1/8” veiner & 1/4” V-gouge) 125011 Deluxe Power Gouge Boxed Set $142.99

(two 1”, two 3/4”, three 5/8” & three 3/8” gouges

7/16”, 3/8” & 1/4” V-gouges; 1/8” veiner) 125138 Manual Handle for Power Gouges $21.99

See our website for individual Flexcut power carver blades.

Mini-Grinder

ARBORTECH POWER CARVING Power carving with an Arbortech offers a wonderfully fast, safe & controllable way to sculpt & carve your small & large scale projects.

The nimble Mini-Grinder has a 2”, 6 tooth cutting disc that rotates on a belt-driven extension arm that puts it 5” forward of the grinder’s motor spindle for an adept reach into tight corners. The Mini Grinder comes pre-assembled & factory mounted onto a 5.8 amp, 12,000 rpm grinder. It comes with a 4-disc sanding assort. (40, 60, 80 & 120x). An optional 2-toothed carbide tipped blade is for very hard woods while the 2” diamond blade cuts stone & tile.

The Pro & Industrial Pro Kits are designed to mount onto your 4” or 4-1/2” angle Industrial grinder that has dual side handle mounts. Pro-kits have a 4”, 6-tooth steel blade (rePro Kit sharpens with chain-saw style file). Industrial Pro-Kits have a 4”, 3-tooth blade with long lasting carbide insert teeth (re-sharpens with diamond paddle).

Pre-Assembled The Power Chisel unit uses a remarkably smooth cam mechanism to Power Chisel drive chisels easily through wood. A unique safety feature keeps the chisel motionless until pressed against the wood. The Power Chisel comes pre-assembled on a 5.8 amp 12,000 rpm grinder and includes 2 128087 Arbortech Pro-4 Kit (steel) $69.99 grinder not included chisels (3/4” straight & 3/4” #7 gouge). 128057 Arbortech Industrial Pro Kit (carbide) $169.99 128086 128051 128052 128061 128072 128062

Pre-Assembled Mini-Grinder 2” Steel Mini-Grinder Blades, pair Sharpening File for 2” Steel Blade 2” Carbide Mini-Grinder Blade 2” Diamond Mini-Grinder Blade Repl. Mini-Grinder Drive Belt

$259.99 $23.99 $17.99 $35.99 $29.99 $20.99

Mini-Grinder Sanding Discs 4 Packs $16.99 each 128064 40X 128065 60X 128066 80X 128067 120X 128053 4-Disc Sanding Assort. (1 ea. 40, 60, 80 & 120X)

128059 3 Pack Repl. Pro Kit Carbide Teeth $64.99 129207 Hand Sharpener for 4” Steel Blade $18.99 129208 Power Sharpening Stones 3 Pack $14.99

(with 1/8” shanks for 4” steel blades) 128076 Pre-Assembled Power Chisel $254.99 128085 Woodcarver’s 3 Pack Chisel Asst. $84.99 3/4” #9 deep gouge, 5/8” 90° V-gouge & 9/32” #7 medium gouge 128043 Woodcarver’s 5 Pack Chisel Asst. $119.99 4 gouge chisels: 3/4” #3, 1/2” #5, 1/2” #9, & 9/32” #11 & 5/16” 60° V gouge

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 25

Hand Saws

5” & 8” WOODWORKER’S FRETSAWS from Knew Concepts includes 1 15 tpi blade

CLASSIC BRITISH BACK SAWS These handsome saws have rigid brass backs, Sheffield steel blades, & stained beech handles.

452801 452802

MADE IN USA

8” British Dovetail Saw (20 tpi rip cut) $74.99 12” British Tenon Saw (13 tpi) $79.99

BRASS BACKED JOINERY SAWS Filed & set for the shallow rip cuts involved in dovetailing, these saws by Crown Tools work better than any other inexpensive saws. 16 tpi blades are 1-1/2” deep to the brass back. Exceptionally comfortable handles are plantation-grown rosewood with brass ferrule.

452809 431167 431168

6” Gent’s Saw $19.99 8” Straight Dovetail Saw $21.99 10” Straight Dovetail Saw $22.99 See Dovetail Saw Covers on page 69.

VERITAS DOVETAIL, CROSSCUT & CARCASS SAWS Veritas has blended modern materials & traditional design in these handsome, balanced, smooth cutting handsaws.

These nicely made handsaws feature a high carbon steel blade with a tooth set of .003” per side set into a spine made of high-pressure injected molded resin reinforced with stainless steel powder & glass fibers.

This strong, stiff backer keeps the blade straight & true. Patterned from antique saws, the elegantly curved solid bubinga handle nestles into your hand giving exceptional cutting control. Crosscut & Dovetail saws have 9-1/4”, .020” thick blades, 1-9/16” depth of cut & 14” OAL. Crosscut saws have 11”, .020” thick blades, 2-3/8” depth of cut & 16-3/8” OAL. 177059 177060 177061 177066 177065

Veritas Dovetail Saw (14 tpi, rip filed) $69.99 Fine-Cut Dovetail Saw (20 tpi, rip filed) $69.99 Small Crosscut Saw (16 tpi, crosscut) $69.99 Veritas Crosscut Carcass Saw (14 tpi) $74.99 Veritas Rip Carcass Saw (12 tpi) $74.99

HAND SAW BLADE GUARD Protect the fine edges of your hand saws with this slip-on, heavy plastic blade guard. Cut to fit.

454901

Hand Saw Blade Guard (27” long)

$4.99

This large bow saw has ECE 700mm a traditional European FRAME SAW wood frame that is tensioned by turning a wing includes a 5 tpi rip blade nut at one end of a steel rod stretcher. Blade 27-1/2”. Hole to hole 26-1/2”.

124541 454602 454603 454604 454605 454606

ECE 700mm Frame Saw $69.99 ~4 tpi Crosscut Blade (1-1/2” x 26”) $9.99 ~5 tpi Rip Blade (1-5/8” x 26”) $8.99 ~5 tpi Crosscut Blade (1-1/2” x 26”) $9.99 ~9 tpi Rip/Joinery Blade (1-1/2” x 26”) $8.99 ~9 tpi Scroll Blade (3/8” x 26”) $8.99

CLASSIC FRAME SAWS

The innovative truss structure of the frame makes it extremely rigid, while keeping the saw incredibly light & easy to handle.

The unique blade mounting system allows the blade to be swiveled either 45°right or left, or else seat firmly at 90° for straightahead cutting. (Angling the blade at 45° allows you to move the back of the frame out of the way for sawing the baseline of a dovetail without frame interference.) The saw’s Cam-Lever tensioning system & knurled fine adjustment screw provides instant, precise tensioning. Wooden Handle. 5” is 4.9 ozs. 8” is 5.7 oz. Both use 5” fret or plain end scroll type blades.

455301 5” Aluminum Woodworker’s Fretsaw $95.00 455303 8” Aluminum Woodworker’s Fretsaw $103.00

This saw’s 11-3/8” throat allows great access for complex fretwork, and its beam-type frame tensions blades firmly. 5” fine-tooth blades are ideal for marquetry, modeling & other demanding scrollwork.

DEEP FRET SAW 451903

Deep Fret Saw (includes 18 tpi blade) $21.99

includes 1 32 tpi blade

451904 451924

ADJUSTABLE FRET SAWS Adjustable length frames & universal blade clamps permit reuse of broken blades up to 5” long.

Adjustable Fret Saw (3” throat depth) $18.99 Adjustable Fret Saw (5” throat depth) $22.99 FRET SAW BLADES Pack of 10 $8.99 451905 32 tpi/.011 451906 22 tpi/.014 451907 16 tpi/.022

OLSEN COPING SAW This saw’s rigid chrome-plated includes 1 15 tpi blade steel frame takes standard 6-1/2” pin-end blades. 5” depth of cut.

Flip the blade end for end to cut on either the push or pull stroke.

158012

Olsen Coping Saw (12-1/2” long) $12.99 Coping Saw Blades 4-packs $2.50 each 158013 158014 158015 158016 24 tpi X-Fine 20 tpi Fine 15 tpi Medium 10 tpi Coarse 158018 32 tpi Blades for metal (pack of 4) $4.50 158017 Assort. 4-pk (1 ea. 10,15, 20 & 32 tpi blades) $3.50 made in Germany

CROSSCUT LOG SAWS by Wilhelm Putsch These old-fashioned saws are made for crosscutting logs & large green timbers rapidly & efficiently. The one-man saw’s 30” blade has a large, comfortable laminated beech handle. Blade end is drilled to accept optional bolt-on 3-1/2” plastic handle.

The two-man saw has a 53” blade with slightly over 2 tpi; teeth are sharpened to cut equally well in both directions. Wood handles approx. 9-1/2” x 1-1/4”.

454621 179852 454631 124414

One-Man Log Saw Second Handle for One-Man Saw Two-Man Log Saw 8” Cant Saw File

$74.99 $15.99 $99.99 $12.99

ADDING A JAPANESE BLADE TO A CLASSIC EUROPEAN HANDSAW DESIGN IS PURE GENIUS.

This German made Classic Frame Saw is beautifully sanded, oiled, & polished. The ergonomically curved cheeks & handles are plantation-grown tropical hardwoods, & the stretcher is cedar. Tension is applied through a stainless rod & thumbscrew. The saw rests easily in the hand & feels much lighter than its appears. The heart of this saw is its impulse hardened Japanese blade, which makes fast, clean cuts in any direction through wood with very little set.

The Classic 400, at 26-1/2” long (handle tip to 310108 Classic 400 Frame Saw w/ Turbo-Cut $124.99 tip), 12-1/2” tall with 6” from blade to bridge, is for 310109 Turbo-Cut Blade (Classic 400) $36.99 smaller users or for cutting joinery. Use the optional (1-1/4” wide, 15 tpi, 15-3/4” long, length hole to hole 14-5/8”) narrow blade for tine joinery or cutting curves.

310110 Narrow Turbo-Cut Blade (Classic 400) $36.99 The Classic 700 is 39” long (handle tip to tip), 16” (5/16” wide, 15 tpi, 15-3/4” long, length hole to hole 14-5/8”) tall & 7-3/8” from blade to bridge. It uses the 26” 310111 Classic 700 Frame Saw w/ Turbo-Cut $159.99 blades for the 700mm Frame Saw, (above) and vice 310112 Turbo-Cut Blade (Classic 700) $54.99 (1-1/4” wide, 12 tpi, 27-5/8” long, length hole to hole 26-1/2”) versa, if you’d like to turbocharge your older saw.

26 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

DOZUKI DOVETAIL SAW Toshio Odate designed this 19” saw specifically for cutting dovetails in hard wood, though it works equally well for softer woods & other fine joints. The replaceable blade has a steel back.

456423 456424

Dozuki Dovetail Saw (19” OAL) $49.99 Repl. Blade (23 tpi, 1/64 kerf, 7” long) $24.99

IKEDAME RYOBA SAW One side of the blade is for ripping (6 tpi), the other for crosscutting (14 tpi). Blade thickness .020”.

456407 456412

Ikedame Ryoba Saw (22-1/4” OAL, 7 oz.) $44.99 Repl. Blade (.028” kerf, 9-1/2” long) $23.99

456406 456411

Ikedame Dozuki Saw (23-7/8” OAL) $59.99 Repl. Blade (17 tpi, .018 kerf, 9-5/8” long) $29.99

IKEDAME DOZUKI SAW A fine cross-cutting saw for joinery work. Blade thickness .012”. 8-1/4 oz.

SILKY TSUBASA SAWS Tsubasa saws have drawn aluminum, black rubbergripped handles which provide more heft than rattanwrapped wood handles. 2” x 11” replaceable blades quick-change via a simple lever. Taper ground teeth.

126427 126428 126423 126424

Tsubasa Kataba Fine Saw (24” OAL) $59.99 Tsubasa Fine Repl. Blade (19 tpi) $32.99 Tsubasa Kataba Coarse Saw (24” OAL) $59.99 Tsubasa Coarse Repl. Blade (12 tpi) $32.99

FLEXIBLE FLUSH-CUT SAW

Hand Saws

SILKY FOLDING SAWS The finest folding saws on the market Saws cut cleanly & rapidly in Makes a superb gift! green or dry wood. A securely textured rubber handle and reliable spring-loaded blade lock make sawing safe & comfortable.

SILKY FOLDING SAW MODEL

126433 126434 456455 456463 126440 126442 126441 126446

TPI BLADE FOLDED OAL LENGTH LENGTH

Pocket Boy 8+ 5” 6-1/2” 11-1/2” $36.99 Pocket Boy Replacement Blade $21.99 Gomboy 9 8” 9-1/2” 17-1/2” $49.99 Gomboy Replacement Blade $29.99 Bigboy 9 14-1/4” 16” 30” $64.99 Bigboy Replacement Blade $34.99 Bigboy Sheath $24.99 Katanaboy 4 19-1/2” 26” 46-1/2” $179.99 w/ Canvas Case 126447 Katanaboy Replacement Blade $89.99

SILKY WOODBOY FOLDING SAW This folding saw has 2 thumb release open positions; one for standard work, the other for tight spots or for kerfing dados. When folded, the sure-grip rubberized handle protects the teeth. Maximum depth of cut is 1-3/4”.

126435 126436

Woodboy Folding Saw (22” OAL) $69.99 Woodboy Repl. Blade (27 tpi, 9-1/2” long) $34.99

With 22 tpi, no set, & a thin, very flexible blade, this saw is designed for glassy-smooth flush cutting of dowels, plugs, thru tenons & other protrusions without marring adjacent surfaces. To use, hold the handle at a modest angle with about 2/3 of the 6” blade’s length pressed gently against the workpiece.

456427

Flexible Flush-Cut Saw (OAL 14”)

$22.99

ANAHIKI LOG SAW – Complete most cuts in less time than it takes to plug in your circular saw For fast, powerful crosscutting or ripping in green or seasoned wood. Excellent for timber framing, general construction, or tree trimming. Blade thickness .029”.

456410 Anahiki Log Saw (30-1/2” OAL, 10-3/4 oz.) $49.99 456415 Repl. Blade (7 tpi, .040 kerf, 14” long) $24.99

NOBEX MITER SAWS

The elegantly simple Swedish design is the hallmark of these fine joinery tools. Die-cast aluminum tables & lightweight bowsaw-style cutting assembly allow quick, precise set-up, very large capacity & very smooth cutting. Positive stops are at 0°, 15°, 22-1/2°, 30°, 36° & 45°. Grooved table surface holds stock at correct settings for compound miters.

The Do-It 110 is Nobex’s entry level miter saw. It cuts stock at a max. depth of 4-1/4” & max. width of 6” at 90° or 3-7/8” at 45°. It uses Proman blades & includes a 22-1/4” 18 tpi blade, threaded stock clamp & length stop for cutoffs up to 25-1/2” long. Table is 3” x 13-1/2”.

Nobex’s versatile Proman compound miter saw cuts stock with a max. thickness of 4-1/4” & a max. width of 7” at 90° or 4” at 45°. Table width is 13-3/4”. The Proman comes with a 22-1/4” 24 tpi blade, 1 stock clamp & length stop for cutoffs up to 30” long.

The Nobex Champion handles up to 7” max. thickness, & REPL. BLADES $16.99 ea.

7” width at 90° or 5” width at 45°. Table is 20” x 4-1/2”.

CH-10 10 tpi Champion Includes a 25” 18 tpi blade, 2 stock clamps & an adCH-18 18 tpi Champion CH-24 24 tpi Champion justable length stop.

CH-32 202-12 202-18 202-24 202-32

32 tpi Champion 12 tpi Proman/202 18 tpi Proman/202 24 tpi Proman/202 32 tpi Proman/202

164008 454005 454006 164015

Do-It 110 Miter Saw $54.99 Proman Miter Saw $99.99 Champion (std. 18 tpi blade) $169.99 Champion (Jap. 16 tpi blade) $189.99

JAPANESE STYLE 16 TPI BLADE

for Nobex Champion Miter Saw This Japanese style blade has impulse-hardened teeth designed for fast/smooth cuts in wood moldings.

It cuts about as fine as a standard 18 tpi blade.

164006

Japanese Style Blade (25” x 1-1/2”) $44.99

SAW SETS Solid die-cast aluminum construction; grips the blade & sets the tooth with a squeeze of the handle.

456454 456453

Fine Saw Set (Blue, 13-27 tpi) $21.99 Coarse Saw Set (Gold, 4-12 tpi) $21.99

JAPANESE FEATHER FILES

456450 456451 456452 475622

#3 Feather File (75 mm long, 16-24 tpi) $12.99 #4 Feather File (100 mm long, 12-17 tpi) $13.99 #5 Feather File (125 mm long, 6-14 tpi) $16.99 File Handle $2.25

KUNZ SAW SET Kunz’s saw set will handle crosscut & rip saws with 4-13 tpi, and back saws & dovetail saws with a min. of 1” of blade width For saws up to 3/32” thick including set.

179815

Kunz Small Saw Set (7-1/4” long)

$17.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS 27

Marking & Measuring

STARRETT PRECISION RULES These rules are graduated in 64ths & 32nds on one side, & in 16ths & 8ths on the other. The 6” rule is graduated vertically in 32nds on both ends of one side, helpful for measuring edges & rabbets in tight places & for router bit or saw blade set-up. Rules are 3/64” thick, slightly flexible springtempered steel with a multi-plate satin chrome finish.

STARRETT DOUBLE SQUARES These delightfully handy squares offer a versatile alternative to fixed steel squares. They are accurate inside & out. The adjustable graduated blades (8ths, 16ths, 32nds & 64ths) let you check square in places too tight for fixed blades & set them for scribing or marking set depths. 6” square also has a spirit level.

461525 4” Starrett Double Square $63.99 461526 6” Starrett Double Square $78.99

461511 6” Starrett Rule w/end grads (3/4” wide) $24.99 461512 12” Starrett Precision Rule (1” wide) $37.99 461513 24” Starrett Precision Rule (1-1/4” wide) $93.99

STARRETT STRAIGHTEDGES These classic tools have no bevels or graduations, they’re just finely milled & finished reference edges.

12” & 24” straightedges are 1-13/32” wide & 11/64” thick. 36” & 48” models are 2-13/32” x 7/32”. Arrows mark suspension points by which the tool should be supported to minimize deflection.

461514 461528 461529 461587

12” Starrett Straightedge 24” Starrett Straightedge 36” Starrett Straightedge 48” Starrett Straightedge

$51.99 $82.99 $183.99 $291.99

STARRETT MACHINIST’S BLUE LAYOUT DYE Opaque, fast-drying dye makes the reference surface you need to find out exactly where parts contact (& where they don’t). It provides a high-contrast background for clean, lightly scribed layout marks. Wash off with alcohol or lacquer thinner.

461531 461565

4 oz. Machinist’s Blue Dye 11.5 oz. Aerosol Blue Dye

$11.99 $23.99

STARRETT TRAMMEL POINTS This handsome trammel set has black cast iron heads that fit beams up to 1-1/2” wide, spring-loaded pin clamping screws, & hardened steel 6” scribing pins. Micro-adjust point position by rotating either eccentrically ground pin. Substitue a thin pencil for a pin.

461550

Starrett Trammel Point Set

$74.99

STARRETT COMBINATION SQUARES Their versatility & reliable accuracy makes these squares indispensable in any shop. Hardened & tempered brushed steel blades are graduated in 64ths & 32nds on one side, 16ths & 8ths on the other. The 4” & 6” combination squares are perfect to carry in your pocket for every layout, set-up & joinery job. The 12” combination square has a convenient 10” usable blade for layout & checking cutoff accuracy. Heads are precision-milled cast iron with black wrinkle finish. Optional accessories convert the 12” square into a center finder for round or square stock, or into a large 180° reversible protractor.

461568 4” Starrett Combination Square $74.99 461520 6” Starrett Combination Square $86.99 461521 12” Starrett Combination Square $90.99 461524 24” Blade for 12” Combination Square $110.99 461522 Center Head for 12” Square $33.99 461523 Protractor Head for 12” Square $110.99 461561 12” Combination Square Set $226.99 (Includes 12” Blade, 12” Center Head & 12” Protractor Head) 161015 Wood Case for 12” Comb. Square $52.99

STARRETT M1 LUBRICANT Cleans & prevents rust Starrett developed this multipurpose lubricant to go on wet to penetrate & then dry so it won’t attract dirt & sawdust. M1 is an excellent general-purpose shop lubricant. The aerosol can will spray even when upside down.

161023 Starrett M1 Lubricant (12 oz. ) $7.99

24” STARRETT SQUARES 24” x 1-1/2” hardened steel blades. 8ths & 16ths on one side & 32nds & 64ths on the other.

461597 Starrett 24” Builder’s Square $459.99 461535 Starrett 24” Combination Square (9” high head) $358.99 (9” protractor head reads 0-90° in 1° increments & shows 1/2” per foot pitch increments)

JAPANESE GARNISH AWLS The steel blade, exceptionally heavy bolster, & white oak handle make these awls sturdy enough to withstand heavy pressure or mallet blows.

476403 476404

Large Garnish Awl (6” long) $15.99 Small Garnish Awl (4-1/2” long) $8.99

SCRATCH AWL Attractive wood handled tool with 5” tapered slim blade is useful for layout work in joint-making & for starting holes for brads.

462101

Scratch Awl

$14.99

HOCK MARKING KNIVES High carbon steel unhandled marking knives are beveled on one side only, with the spear pointed for either right or left handed use.

122535 122536

3/4” x 7” Marking Knife 1/4” x 7” Marking Knife

$30.99 $27.99

JAPANESE MARKING KNIFE This simple tool is remarkably comfortable & well-balanced.

The laminated steel blade is beveled on one side only, so the cutting edge lies flush against a square, & stands vertically for clean marking. The back of the handle is hollowed to speed the honing process, & is a nice fit for the right thumb.

466401

Japanese Marking Knife

$14.99

DOUBLE EDGED STRIKING KNIFE The double bevel on this marking knife allows right or left-hand use & marking in both directions. The 55° angle of the knife’s tip is a comfortable striking angle & the flat back lets you position the knife’s edge against your straight edge. Hardwood handle. OAL 6-1/2”.

169334

Double Edged Striking Knife

$9.99

CZECK EDGE PATTERN PILOT MARKING KNIFE Perfect for general layout work, this elegant marking knife is a delight to use.

Its 1-3/4” long blade is 3/8” wide x .060” thick with a 65° angle forming the point. With a flat back & the dual edge 40° bevels on the top of the blade, the knife registers snugly against a straight edge from both the left & right sides. The blade is bedded into a machined bronze ferrule with three turned grooves that provide a gentle resting place for your index finger. The graceful curves of the cocobolo handle are easy to grip & give you stable ergonomic control of the tool. Blade is O-1 tool steel, RC59-60. OAL 7-1/2”. Shellac finish.

455402

Pattern Pilot Marking Knife

$49.00

28 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Marking & Measuring PROCARPENTER TAPE MEASURES FastCap tape measures have an erasable writing surface on the case, so you can conveniently jot down measurements.

The steel tape is 30% thicker than other tape blades for longer reaches; a “hold” button temporarily stops the tape in position in addition to the standard slide lock; & the hook has 4 rivets. A rubber boot armors the case (which has an integral pencil sharpener) making it easier to grip. Increments of 1/16” or 1mm are easily read. Story Pole Tapes have standard measurements along the top edge & an erasable writing area along the bottom edge. The Inch/Metric versions have metric measurements along the bottom edge (reading left to right) & inch grads along the top.

Revolutionary FlatBack Tapes easily measure curved workpieces & come in 2 markings; one the same as the Story Pole tapes, the other an Inch/Metric that has a narrow writing margin on both edges. The Speed Clip hooks on your belt & securely holds your tape & pencil, while preventing damage from the tape’s clip.

167238 167214 167215 167236 167242 167243

167311 167314 167313 167312 167239

146801

16’ Standard Tape 16’ Story Pole Tape 16’ L & R Reading Tape 16’ Inch & Metric Tape 16’ FlatBack Story Pole Tape 16’ FlatBack Inch/Metric Tape (graduations end shy of tape’s edge) 25’ Standard Tape 25’ Story Pole Tape 25’ L & R Reading Tape 25’ Inch & Metric Tape Speed Clip

$6.99 $6.99 $6.99 $6.99 $6.99 $6.99

$9.99 $9.99 $9.99 $9.99 $1.50

SADDLE SQUARE & MITER This metric aluminum miter square carries layout lines around corners at 45° & 90°. Both 60mm wide faces have cutouts for registering marks inside the square’s body.

Saddle Square & Miter (6-5/8” long) $22.99

24” FLEXIBLE CURVE This vinyl covered flexible strip will design, transfer & duplicate curves, holding a shape created freehand or molded to an object. Two edges are slightly raised for use with pens. Built-in rulers read in 1/8ths & mms. Min. 3/4” radius.

167401

Flexible Curve (24” long & 3/8” x 1/4”) $9.99

WIXEY DIGITAL READOUT for Planers Wixey’s digital planer readout has a large LCD display that reads in decimals (.005”), mm’s (.1 mm) & fractions (1/32”). The unit fits most portable planers & has a 6” measuring length. Measuring modes include incremental & absolute. A constant memory retains calibration even when off. Battery powered display has auto shut off.

168502

Wixey Digital Readout for Planers

$59.99

TRAMMEL POINTS These simple trammels clamp on a beam up to 1-5/16” thick. Points are 1-3/8” long.

A pencil can be substituted for a point.v 463901

Trammel Points

461913

Deluxe Trammel Points

American Woodworker Magazine: "Every woodworker should have a dial caliper . . . this is the one to get."

WOODWORKER'S STAINLESS STEEL DIAL CALIPER This fine machinist-quality caliper may become your personal “ultimate measuring tool”. It’s calibrated in 64ths of an inch, with major divisions clearly marked (1/16, 1/8, 3/16 etc.). The face is large (1-3/8” dia.) & exceptionally easy to read; dimensions as small as 1/128” are visible at a glance. The inner scale reads in hundredths of an inch, which is useful for machine work & serves as a handy conversion table as well.

465008

6” Woodworker's Dial Caliper

$29.99

6” FRACTIONAL DIGITAL CALIPER For our digitally inclined woodworkers, we are pleased to offer a 6” Digital Caliper that displays in fractions of an inch, as well as decimals & millimeters. The 5/8” high LCD screen is easy to read with digits within the fraction display measuring 1/4” high & & decimal numbers & mm’s displaying a full 1/2” high. Touch a button to scroll fractions, (to the nearest 1/128) decimals or millimeters or to reset to zero at any point. Divisions on the bar show in 1/10ths & mm. Stainless steel construction with high impact sensing head. Auto-shut off.

168310

6” Fractional Digital Caliper $29.99 $36.99

ROSEWOOD HANDLE SLIDING BEVELS Sliding bevels lock & hold angles between 0° & 180°. Rosewood stock with brass end caps.

7-1/2” steel-blade bevel locks with wingnut; 9” model has a recessed locking lever.

431165 461118

7-1/2” Rosewood Bevel 9” Rosewood Sliding Bevel

$21.99 $26.99

PRECISION SHINWA SLIDING BEVELS The nicely crafted, solid stainless steel small sliding bevel is only 9/16” wide & 1/4“ thick. The thin profile allows accurate transfer of angles to paper. The 7” handle houses a 6” blade. The stiff 1/16” thick blade locks with a brass knurled knob.

The premium 10” Japanese alumade in Japan minum bevel’s locking screw is in the end of the handle, so the sliding bevel lays flat on either side. The heavy blades’s generous length is convenient for laying out complementary angles.

The aluminum legs of the 20” sliding bevel rotate a full 360°, & can be fixed at any desired angle with a knurled steel locking nut. The nut actually locks a short third leg, or brace, so that the locked bevel has the rigidity of a triangular structure. Folds into itself for storage. Note: the legs do not lie in the same plane.

461204 461202 461205

$29.99

DELUXE TRAMMEL POINTS Heavy duty trammels with hardened points eccentrically ground for precise setting. Either point locks at a 45° angle for scribing into corners, & can be replaced by a pencil. Use on beams 1-1/2” wide or less.

OUR MOST POPULAR CALIPER!

Small Shinwa Bevel 10” Sliding Bevel 20” Sliding Bevel

$12.99 $24.99 $54.99

VERITAS PREMIUM SLIDING BEVELS Stainless steel blades, resin-impregnated permanently stabilized wood bodies, & a unique flush blade locking lever make these bevels as functional as they are handsome. $49.99

467019 467018

Veritas 4” Sliding Bevel Veritas 10” Sliding Bevel

$54.99 $59.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR STAIN & FINISH COLORS 29

Marking & Measuring

VERITAS DUAL MARKING GAUGE This Dual Marking Gauge has twin rods to transfer & scribe 2 different settings at a time. Bevels on the hardened cutting wheels are oriented to oppose each other, so the bevels can be on the waste side of a cut. Internal O-ring w/ locking thumbscrew allows for easy adjustments. Scribe up to 5-3/4” wide. Cutters recess into the brass face for safe storage.

177069 Veritas Dual Marking Gauge (OAL 7-1/4”) $64.99 177070 Outside Repl. Cutter (Dual Marking Gauge) $3.99 177071 Inside Repl. Cutter (Dual Marking Gauge) $3.99

VERITAS WHEEL MARKING GAUGES The hardened steel cutting wheel on these gauges starts & marks smoothly, without concerns about attack angle or tearing during cross-grain marking. The bevel is on the inside, so it pulls the gauge tight against your stock & resists following uncooperative grain.

With the micro-adjusting gauge you tighten the collet on the bar, rotate the fence body to adjust the measurement, tighten the thumbscrew & make your marks.

467010 467015 177028 177029

Veritas Wheel Marking Gauge Graduated Wheel Marking Gauge Micro-Adj. Wheel Marking Gauge Graduated Micro-Adj. Wheel Marking Gauge

ANGLE CUBE DIGITAL GAUGE Adjust & set the tilt angle of any saw blade, machine table or fence to within 1/20° An internal sensor measures absolute level. LCD characters are 1/2” high & the display automatically inverts when the unit is turned upside down. Magnets on 3 sides give maximum placement flexibility. Hold function locks in reading.

2-5/32” square x 1-3/16” thick. Includes 9V battery.

169310

150101 Oneway Multi-Gauge Dial Indicator

easy to lay out both the square & slanted lines for dovetails at 1:6 or 1:8 slopes. Black steel blade for angled layout marks dovetails up to 1-3/8” deep; 1-7/16” long brass stock marks square lines.

135105

177032

CONTOUR GAUGES Trace & copy molding profiles & irregular shapes up to 1” deep for scribing and other installation work.

Thin plastic fingers (17 per inch) are stacked in a holder to make both positive & negative versions of an outline you press against the gauge.

461113

GRANITE ANGLE GAUGE At over 1 lb., this granite set-up gauge sits solidly on machine surfaces when checking blades for square. With 45° chamfered edges, it creates a crisp 5/32” wide reference face on the 90° & 45° sides. An 1-3/8” dia. through-hole makes it easy to grip & hold. Comes in a fitted plastic case.

Bevel Gauge (3” x 12”) $19.99

Veritas Bevel Gauge

$9.99

Cutting Gauge (8” long) $19.99

461114 Marking & Mortise Gauge (7-1/2” long) $39.99

DELUXE MARKING & MORTISE GAUGE This deluxe model, similar to the one above, has a thumbscrew-operated slide for precise setting of mortise width.

111200 Granite Angle Gauge (6” x 1” x 3-1/8” high) $19.99

169306

$25.99

MARKING & MORTISE GAUGE Combination gauge features 2 spurs on one side, a fixed & an adjustable with brass pull slide for laying out mortises.

Single spur on other side is for regular marking.

Knurled brass knob locks headstock in place.

$13.99 $19.99

BEVEL GAUGE Setting your tablesaw blade, bandsaw table, drill press or sliding bevel has never been easier This hardened stainless steel rule has a satin chrome finish etched on one side with inches in 1/16ths, & on the other with angles from 0° to 50° in clear, 1/4° increments. The angle side of the tool is graduated in 1/16ths across one end, making it convenient for setting depth or width of cut.

Dovetail Template

VERITAS BEVEL GAUGE Quickly check a tool’s cutting angle This brass angle checker has seven 3/4” deep slots; 15°, 20°, 25°, 30°, 35°, 40° & 45°. 2-1/2” in dia. & 1/16” thick.

CUTTING GAUGE This gauge is for incising clean lines across the grain, as when laying out dovetails & other joints. The gauge actually cuts the visible shoulder of the joint before the saw is used for stock removal.

177025 Veritas® Set-Up Blocks $49.99

5” Contour Gauge 10” Contour Gauge

$93.99

DOVETAIL TEMPLATE from WoodjoyMADE IN This pocket-sized, but hefty jig makes it USA

VERITAS® SET-UP BLOCKS Useful in positioning

464905 464904

$39.99

ONEWAY MULTI-GAUGE A heavy, precisely machined cast iron base lets this dial indicator work on both cast aluminum & on steel tool surfaces. The 1-1/4” thick frame serves as an accurate square for fence & blade set-up.

$39.99 $39.99 $45.99 $49.99

drill press components, table saw jigs & router fences Clearly marked blocks span from 1/16” to 4-11/16” in 1/16” increments. Set includes a large 1” x 2” x 3” steel block (accurate to within 0.0002”); five 3/4” x 2” aluminum blocks 1/16”, 1/8”, 1/4”, 1/2” & 3/4” thick (accurate to within 0.002”); & plastic case with fitted foam insert.

Angle Cube Digital Gauge

461116

Deluxe Mortise Gauge (7-1/2” long) $64.99

ACCUSCRIBE PRO maintains a consistent scribe offset An articulating pencil head pivots 215°to accomplish difficult tasks like scribing siding around brick or stone. Insert a steel point into the plastic body and use it as a compass. Points are stored in clips. It also has a built-in pencil sharpener & large thumbscrews on the joints to prevent slippage.

167247

Accuscribe Pro (5-1/2” long) $17.99

MINI MAG DIGITAL FRACTIONAL HEIGHT GAUGE Set depth of cut on your tablesaw, router & jointer with digital accuracy in fractional & decimal inches or millimeters Fractional read out displays down to 1/128” with an overall accuracy of .001” for decimal inches. The LCD display is easily read, with digits 3/8” tall. Strong magnets in the aluminum base steady the unit on cast iron tops & support it horizontally on a steel fence. Caliper foot & rule are hardened stainless steel. Capacity is 0”- 6”. Zero button for calibration & auto-shutoff feature.

Includes 3V lithium 169309

Mini Mag Digital Fractional Height Gauge

$49.99

CR 2032 battery

30 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

VERITAS STEEL STRAIGHTEDGES These fine economical straightedges are accurate enough to set up woodworking machines & check surfaces. Edges are milled to within 0.001” over their length. The 12” & 24” straightedges are 1-1/2” wide x 1/4” thick. The 36” length is 1-1/2” x 3/8” thick. A hole at the end is for hanging storage.

177046 177033 177047

12” Veritas Steel Straightedge 24” Veritas Steel Straightedge 36” Veritas Steel Straightedge

$42.99 $64.99 $89.99

Marking & Measuring

VERITAS SADDLE SQUARE The legs of these black anodized aluminum squares wrap around 90° corners, letting a pencil work nearly as precisely as a knife. Small square is 2” wide x 1-1/4” x 2-1/4”. Large square is 1-1/2” wide x 1-3/8” x 3-3/8”, just right for measuring a 2 x 4.

467030 177019

Small Veritas Saddle Square Large Veritas Saddle Square

PRECISION ADJUSTABLE SQUARES

$16.99 $19.99

Quality precision squares with machined, legible chrome blades These precision squares have meticulously ground cast iron bodies with a textured matte black finish, & machined (not stamped), satin-chrome blades etched in 1/16ths, 1/8ths, 1/32nds & 1/64ths. Knurled thumb wheels are comfortably sized. They compare quite favorably to Starrett squares, but cost much less.

The 12” Combination Square’s head has 90° & a center-finder head with 2-1/2” sides, & a 7” long 45° sides, is 4-1/2” long x 3-3/4” high. The 6” Com- protractor head with single degree markings. Combibination Square’s head is 2-7/8” long x 1-3/8” high. nation squares & set include a fitted plastic case.

Both have a bubble level & screw-in scribe pin. The 169301 12” Precision Combination Square $36.99 4” Double Square’s head is 2-1/2” long x 1” wide x 169305 6” Precision Combination Square $29.99 1/2” thick. The 6” Double Square’s head is 4” long 169303 4” Precision Double Square $19.99 x 1-1/8” wide x 5/8” thick. The 12” Combination 169304 6” Precision Double Square $24.99 $84.99 Square Set with 3 heads has the combination head, 169302 12” Precision Comb. Square Set

PRECISION STEEL RULES CZECK EDGE RULER STOP

Nice quality rules with a satin chrome non-glare finish marked in 32nds & 64ths on one side & mm & 1/2 mm 463020 6” Steel Rule (1/2” wide) $9.99 on the other side.

463021 12” Steel Rule (1” wide) $17.99

Gives almost any size ruler the capability of repeatable, accurate measurements from a fixed edge.

Non-marring precision machined jaw faces securely clamp onto a ruler with a twist of the knurled brass knob.

The Ruler Stop clamps tightly to a machine fence or most anything that fits in the 1-1/4” max. jaw width. 1/2” x 1” aluminum aircraft grade body & jaws, 1/4” dia. hardened steel guide rods & a stainless steel lead screw. OAL 3-7/8”.

made in USA

455403

Czeck Edge Ruler Stop

$32.99

JAPANESE COMBINATION SQUARE Precise combination 90° & 45° stainless steel try square is 4” x 6-1/4”. Graduated in 1/16ths.

Miter side measures vertical distance.

466405

Japanese Combination Square

$19.99

LUFKIN 6’ FOLDING HOOK RULE This version of Tage Frid’s favorite rule has 1/16ths scale. A fold-out brass hook registers the rule on the end of a board. Narrow brass 6” slide-out rule measures tight spaces.

161401 Lufkin Folding Hook Rule $26.99

LIE-NIELSEN DOVETAIL MARKER Made from cocobolo & brass, the clearly marked sloped sides of the tool let you layout for both softwoods (1:6 pitch) & hardwoods (1:7 pitch).

134054

L-N Dovetail Marker

DOVETAIL MARKERS Anodized aluminum dovetail markers with 1:6 ratio for softwood & 1:8 for hardwood.

467003

Pair of Dovetail Markers

$35.00

$12.99

SET OF 3 ACRYLIC DOVETAIL MARKERS See-through acrylic dovetail markers include slopes 1:8, 1:7 & 1:6 for joints in hardwood & softwood.

8” DIGITAL PROTRACTOR & RULE MADE IN This digital protractor bevel square USA Includes displays to the nearest 1/10th° on a spare an easily read 1/2” high digi3V battery 177953 Set of 3 Acrylic Dovetail Markers $19.99 tal display. Steel legs, (1-1/8” x 11”) will pickHEAVY DUTY PENCIL COMPASSES up both inside & outside angles from your work/plans Beautifully made from 1/4” square tool steel, so you can transfer them to your miter saw, table saw or machined (not stamped!) & polished with project. Knurled locking knob secures the legs & a hold no sharp edges. Accepts standard pencil. button keeps your reading displayed even if you move 310311 6” HD Pencil Compass (12” dia.) $15.99 the leg setting. The legs have 8” of etched graduations 310312 8” HD Pencil Compass (16” dia.) $18.99 in 1/16, 1/32, 1/64’s & mm. Display range is 0-360° & 310313 12” HD Pencil Compass (24” dia.) $21.99 the display reverses to read upside down. So get creative EXTRA LARGE COMPASS/DIVIDERS & make that 7 sided picture frame now that you have a Polished steel dividers with hardened protractor to set your saw’s miter guide accurately to 25.7°! points can scribe a circle (or arc), or draw one 169336 8” Digital Protractor & Rule $19.99 with a pencil in the integral pencil clamp.

310317 18” Compass/Divider $25.99 NOBEX QUATTRO CARBON 310318 24” Compass/Divider $33.99 FOLDING SQUARE from Sweden Folded up, this tough, accurate 3D SQUARES Excel as temporary jigs & reinforced polycarbonate toolbox fixtures for keeping carcasses aligned during assembly. square is only 2” x 7-3/4”.

At just SERIOUSLY 5/32” thick aluminum squares are milled 55 grams, you will barely know it’s TOUGH! straight & square to within .002” over their in your pocket. Positive angle stops are at 45°, 90° & length & surfaces are smooth & burr free. 6” 135°. The 6-1/4” x 1-5/8” blade is graduated in mm x 1-1/16” legs & clamp surfaces have six 3/16” holes for & inches (32nds) with an accuracy to .08°. jig attachment or temporary fastening.

464002 Nobex Quattro Carbon Folding Square $16.99

163608

3D Squares (Pack of 2)

$29.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 31

Turning Tools & Kits PEN & PENCIL KITS Both slimline & designer style pens twist to advance or retract the tip & include a fine-point Swiss carbide ink cartridge. All kits include a pocket clip, & all hardware has durable titanium gold plating. The pencil has a spring loaded plunger to advance the .5mm lead (included) & a small eraser beneath the cap.

141671 141673 141672

Slimline Pen Kit Designer Style Pen Kit Slimline Mechanical Pencil Kit

WOOD BLANKS Turn pens, pencils & letter openers from these blanks selected for color & figure.

3/4” x 3/4” x 5” Wood Pen Blanks 120301 Acacia Blackwood 120302 120310 120303 Bloodwood 120312 120309 Lacewood 120313 120316 Lignum Vitae 3/4” x 3/4” x 5” Wood Pen Blanks 120304 Blackwood 120311 120308 Kingwood 120315 3/4” x 3/4” x 5” Wood Pen Blanks 120307 120305 Bocote 120306 Bolivian Rosewood 120314

$3.99 $5.99 $7.50

$.99 each Padauk Panga Panga Purpleheart Walnut $2.50 each Pink Ivory Tulipwood $1.50 each Cocobolo Zebrawood

PEN TURNING TOOLS 7mm dia. Maxi-Mandrel pen mandrels fit 1MT & 2MT lathes. They include a 7mm drill bit & 3 bushings for use with slimline kits. 7mm Pen Mill (handle not supplied) trims the lengths of wood blanks & brass barrels to perfectly fit your pen hardware.

141439 141440 141659 141551 141552

#1MT Maxi-Mandrel #2MT Maxi-Mandrel 7mm Pen Mill 7mm Slimline Bushings set/3 7mm Designer Bushings set/3

$19.99 $19.99 $15.99 $3.99 $4.99

RIKON EXPANDABLE MINI LATHE With an impressive 12” swing & 16” between centers (with an optional 24” long bolt-on extension), 5 YEAR WARRANTY this lathe goes beyond “mini”. The 1” x 8 TPI threaded drive spindle is turned by a 1/2 HP 6.6 amp motor & a 6-step pulley for speed changes from 430-3900 RPM. The 12 position indexed headstock & tailstock have a #2MT. A handy folding handle helps when moving.

Includes a 4 prong drive center, 8” tool rest, live tail center, 3” faceplate & knock out bar. 32” x 19”. 89 lbs.

Lathe ships within lower 48 states for $39 surcharge.

Steel Stand ships within lower 48 states for $20 surcharge.

191001 Rikon 12” Exp. Mini Lathe $349.99 $399.99 191002 24” Bed Extension $109.99 191006 Steel Stand $159.99 191007 Extension for Stand $89.99

SYSTEM 3 BARREL BOND 5 Minute Epoxy Gel A 2 part epoxy gel developed for bonding brass tube pen parts into wood blanks. Solvent free. 2 oz.

196388 System 3 Barrel Bond 5 Minute Epoxy Gel $14.99

PEN TURNER’S ABRASIVE KIT This handy sanding assortment has 4 (150, 240, 320 & 400X) 1” x 20’ rolls of J-weight cloth-backed abrasives (resin-bonded aluminum oxide), in a pull-out dispenser box, perfect for finishing pens & other between-centers turnings.

141617

Pen Turner’s Abrasive Kit

141642 141649

Single Rosewood Presentation Box Black Felt Pen Pouches (10 pack)

4-IN-1 SCREWDRIVER KIT This screwdriver kit includes a tube, 2 double-ended screwdriver bits (#1 & #2 Phillips and small & large slotted bit), bushing, & instructions. You provide the 1-1/2” x 1-1/2” x 6” wood blank.

161960 4-in-1 Screwdriver Kit NICKEL PLATED BOTTLE STOPPER KIT Combine this stopper’s sleek, high-tech look with the warmth & appeal of your turned wooden knob. A threaded stud glues into your knob, making removal & washing a snap. Stopper is 2-3/4” high & approx. 1” dia. Black rubber fins fit standard bottle necks from 5/8”–13/16” dia.

141675 Nickel Plated Bottle Stopper Kit $3.99 Bottle Stopper Wood Blanks 4 pk (1-1/2” square x 2”) $11.99 120321 Blackwood 120323 Cocobolo 120325 Olivewood 120322 Bocote 120324 Rosewood 120326 Pink Ivory

$15.99

PRESENTATION BOX & POUCHES Hinged, single grooved pen presentation box is perfect for displaying your custom turned pens. $4.49 $2.99

$5.99

SCRATCH AWL KIT Create a one-of-a-kind marking tool This kit includes polished brass front & end caps, stainless steel pointed shaft (4-1/2” exposed), threaded couplings, interior tube and instructions. You provide a wood blank 1-1/2” to 2” square x 3” for the handle. OAL 8”. Requires a 7mm drill bit, 7mm pen mandrel, 7mm bushings and a lathe with a tailstock live center.

Scratch Awl Kit $13.99 3-1/8” H&L Sanding Discs METABO SXE 400 COMPACT R.O. SANDER 10-pk 25-pk A turner’s favorite for finishing open bowls & platters. Grit $4.99 $10.99 This tough little sander does a fine job where access is limited. 40 131102 131114 Its 3-1/8” H&L disc reaches forward clear of the motor housing, letting 60 131103 131115 80 131104 131116 you sand unobstructed 131101 Metabo SXE 400 RO Sander $134.99 100 131105 131117 right into corners. 2.0 amps. 131111 25 Disc Sanding Assort. $9.99 120 131106 131118 1/8” orbit dia. 5,000-10,000 OPM 131112 Soft Contour Backing Disc $6.99 180 131107 131119 V.S. Weighs 3.3 lbs. Built-in dust 131113 3-1/8” Lambswool Polishing Pad $7.49 240 131108 131120 port connects your 1-3/8” i.d. hose 131129 3-1/8” Repl. Pad for SXE 400 $14.99 320 131109 131124 131128 3-1/8” H&L Polishing Sponge $4.99 400 131110 131125 for dust-free sanding.

VERITAS CENTER MARKER

The best center marker on the market

Sharp steel marking blades cut distinctly into any stock, marking precise centering lines & a natural place to seat your drive center. Use on round, square or polygonal stock up to 6” across. Marker is conveniently drilled for permanent mounting near your lathe.

437004

Veritas Center Marker

$29.99

141428

VERITAS SCRAPER BURNISHER This jig burnishes a hook onto the front face of your turning scrapers so they can cut micro thin shavings, leaving a smooth, clean finished cut. Two carbide rods are hard enough for use on HSS & will let you burnish on bevel angles from 70° to 80° Instructions included.

467006 Veritas Scraper Burnisher $45.99

32 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Turning Tools

LAMP AUGER BITS from Clico These bits pass through hollow stocks to drill holes the length of your workpiece. Made for endgrain, the cutting edge is easily resharpened.

141910 5/16” Lamp Auger Bit (27-3/4” long) $59.99 141971 3/8” Lamp Auger Bit (27-3/4” long) $59.99

CROWN COMBINATION RING CUTTING TOOLS Specially shaped tools make it easy to create bracelets, bangles, curtain rings & captive rings in solid or laminated wood.

Double-beveled tools cut from both left & right, undercutting a ring from each side. Size is ring thickness.

143001 1/4” Combination Captive Ring Tool $35.99 143002 3/8” Combination Captive Ring Tool $39.99 143003 1/2” Combination Captive Ring Tool $41.99

CROWN PRO-PM TURNING TOOLS

For less time maintaining tools & more time turning wood.

Representing the highest state of the art, tools created with Crown’s powder metallurgy technology have superior wear resistance (Rc 66-68) & hold their edges about 3X longer than conventional HSS tools. Handles are ebonized ash. OAL listed after tool.

143006 143110 143009 143007 143008 143068 143116 143010 143063 143064 143065 143066 143111 143117

1/2” Spindle Gouge 3/8” Short Bowl Gouge 1/4” Bowl Gouge 3/8” Bowl Gouge 1/2” Bowl Gouge 3/4” Bowl Gouge 1/4” Spindle Gouge 3/8” Spindle Gouge 3/4” Square Scraper 3/4” Round Nose Scraper 3/4” Skew 3/16” Diamond Parting Tool 3/4” Spindle Roughing Gouge 1/2” Ellsworth Bowl Gouge

GALBERT CALIPER

19” $56.99 19” $64.99 26” $64.99 26” $72.99 26” $99.99 25” $169.99 19” $45.99 19” $49.99 19” $56.99 19” $56.99 19” $59.99 19” $69.99 19” $99.99 26” $119.99

Indispensable for creating accurately sized spindles.

With a parting tool & the Galbert Caliper you can size out a spindle while the workpiece is being turned. Much faster than setting & resetting a standard set of outside calipers. The direct reading scale displays the diameter of a workpiece from 1/2” to 2-3/4” in 32nds. An optional metric scale reads in 1/10ths mm. Made from high quality stainless steel, glass reinforced nylon & clear polycarbonate. See a video of the Caliper on our website.

162509 162510

Galbert Caliper (OAL 6-1/2”) $79.99 Metric Scale for Galbert Caliper $4.99

DOUBLE ENDED CALIPERS for bowl turners One end shows the measurement taken at the other. Size is max. jaw depth.

310319 310342

4” Double Outside Caliper 7” Double Outside Caliper

$14.99 $23.99

SORBY SIZING TOOL This tool mounts on your beading & parting tools so you can quickly and accurately cut a pre-set dimension for your turnings.

Works with 3/8” parting, beading & bedan tools, or 1/8” parting tools up to 3/4” wide. Maximum stock diameter is 3-1/2”. Cast aluminum.

141740

Sorby Sizing Tool (OAL 7”) $34.99

ANCHORSEAL 2 Green Wood & End Grain Sealer This thick, waxy sealer provides the control you need to slow evaporative moisture loss through end grain to reduce checking & warping as green wood dries.

The dry film is soft enough to be easily scraped off wood.

(It works well as an unobtrusive dressing for pruned tree limbs.)

195311 Anchorseal 2 (gallon) $19.99 195313 Anchorseal 2 (55 gallon drum) $499.99 Truck shipping charges apply. Contact us for a truck shipping quote.

BODGER TOOLS Exclusively from Highland Woodworking Whether you are a beginning woodturner or a seasoned pro, our Bodger turning tools offer a very affordable, high quality alternative to British turning tools. Made from high-speed steel, these rugged tools are quite tough with a Rockwell hardness of Rc 60. We have found them to be ideal for use by students in our turning classes, & we guarantee they will ably serve the needs of any woodturner who wants exceptional performance at an affordable cost.

In our tests, we found them equal in performance to today’s premium British tools made of standard high speed steel. All Bodger turning tools have full-sized hardwood handles, metal ferrules & good edge geometry.

Bodger gouges are sized in the North American standard. The listed measurement is the width at the outside of the tool, not the width of the flute.

WIDTH

LENGTH OAL

169201 1/2” Skew 5-3/4” 15-3/4” $19.99 169202 1” Skew 6-1/4” 18” $27.99 169203 3/4” Oval Skew 6-1/4” 16-1/4” $22.99 169204 1/2” Round Nose Scraper 6” 16” $19.99 169205 1” Round Nose Scraper 6-1/2” 18-1/4” $24.99 169206 1-1/2” HD Round Nose Scraper 6-3/4” 20-1/2” $39.99 169207 3/4” Square Scraper 5-1/2” 16-1/4” $19.99 169208 3/8” Bowl Gouge 9” 22-1/4” $22.99 169209 1/2” Bowl Gouge 9” 22-1/4” $29.99 169210 5/8” Bowl Gouge 9” 22-1/4” $35.99 169211 2” Spindle Roughing Gouge 6-1/4” 19-3/4” $49.99 169212 1/4” Spindle Gouge 5-3/4” 15-3/4” $13.99 169213 3/8” Spindle Gouge 6-1/4” 16” $16.99 169214 1/2” Spindle Gouge 6-1/4” 16” $21.99 169215 1” Spindle Roughing Gouge 6-1/4” 18” $26.99 169216 1/8” Standard Parting Tool 3-1/4” 11-1/4” $16.99 169217 3/16” Diamond Parting Tool 6-1/2” 16-1/2” $23.99 169220 1-1/2” HD Bowl Scraper $79.99 169221 3/4” Spindle Roughing Gouge $39.99 169241 Rotary Bowl Sander uses 2” sanding discs 11” $39.99 169218 Set of 6 Bodger Turning Tools $99.99 $143.94 value if purchased separately - Save $43.95!

3/16” diamond parting tool , 3/8” spindle gouge, 3/8” bowl gouge, 1” skew, 1” spindle roughing gouge & 1” round nose scraper Bodger Tools are made in China to Highland Woodworking specifications.

Robert Sorby Turning Tools HSS with brass ferrules & wasp-waisted ash handles trimmed out with protective brass end caps.

BEDAN/PARTING TOOL Width

OAL

141162 3/8” Bedan 19” BEAD FORMING TOOLS

$54.99

141810 141811 141812 141813

$28.99 $36.99 $36.99 $41.99

Bead Width OAL

1/8” 1/4” 3/8” 1/2”

12-1/2” 13-1/2” 13-1/2” 13-1/2”

SORBY HOLLOWMASTER Unlike most swivel-tip tools, this tool’s flat 3/4” wide underside sits stably on your toolrest & counters the tool’s urge to rotate. Gooseneck design & adjustable 1/4” cutter with half-round end, & round scraping cutter. 9” blade.

141774

Sorby Hollowmaster (OAL 21”) $84.99

SEE OUR SELECTION OF ONEWAY LATHES AT HIGHLANDWOODWORKING.COM 33

Turning Tools

SUPERNOVA2 LATHE CHUCK Teknatool’s SuperNova2 4-jaw scroll chuck’s 4” steel body is nickel plated for long life. Its quick-ratio scroll mechanism is driven by a ball end hex wrench, which is easy to insert & can be tilted away from your workpiece to avoid interference. The composite backplate encloses the back of the body to keep out dust & includes 24 3mm indexing holes for precision positioning.

For all spindle sizes, (except 33mm-3.5), a threaded insert, (sold separately below), is required to adapt the chuck to your lathe. For lathes with a 33mm-3.5 spindle, we carry a SuperNova2 which is directly threaded.

It will not accept other threaded inserts and can not be used on any other size spindle.

The SuperNova2 includes 2” jaws, a woodworm chuck screw & a 7” long T-handle ball end hex wrench.

The Chuck Spur Center mounts in the chuck & allows you to turn between centers without removing the chuck. The thin profile 1-1/2” Insert Spanner, makes removing threaded inserts from the chuck a snap.

301501 301502 301521 301544

SuperNova2 Chuck (without insert) $179.99 SuperNova2 Chuck 33mm-3.5 $179.99 Insert Spanner Wrench $12.99 Chuck Spur Center $19.99

NOVA THREADED INSERTS $22.99 each 301510 Blank Nova Insert 301511 5/8” Smooth (Shopsmith) 301512 3/4”-16 tpi RH (Sears, Record, Rigid) 301513 1”-8 tpi RH/LH (Some Delta, Jet, General) 301514 1”-12 tpi RH (Grizzly) 301516 1-1/4”-8 tpi RH (Some Delta, General, Powermatic)

BARRACUDA 2 LATHE CHUCK

Fits lathes with a 3/4”- 16tpi or 1”- 8tpi spindle The Barracuda 2 includes 4 sets of jaws & a chuck screw. The jaws provide internal chucking capacity from 7/8” to 4-7/8” & external from 3/8” to 4-5/8”. Onehanded operation frees the other to hold your work.

141443

Barracuda 2 Chuck

$189.99

MINI GRIP 3 CHUCK Includes 3 sets of jaws

A great This 4-jaw self-centering chuck will value! give your mini lathe the stock holding

options of a big chuck in a package that fits your machine & budget.

Standard jaw blocks hold round or square objects from 1/8” to 1” dia. #1 step jaws grip 3/8” to 1-1/4” externally, or internally like an expanding collet from 1” to 2-1/2” dia. #2 jaws have 1-1/2” to 2-3/8” external & 2” to 3” internal capacity. Includes 2 adapters to fit 1”-8 TPI & 3/4”-16 TPI nose spindles.

185007

Mini Scroll Chuck

$99.99

LIVE CENTERS, DRIVE CENTERS & DRILL CHUCKS

Drill chucks include MT mounting spindle & chuck key.

483051 #1MT Ball Bearing Live Center $19.99 483052 #2MT Ball Bearing Live Center $15.99 483054 #1MT 4-Spur Drive Center $9.99 483055 #2MT 4-Spur Drive Center $9.99 483011 #1MT 1/2” Drill Chuck $36.99 483012 #2MT 1/2” Drill Chuck $36.99 483013 #3MT 1/2” Drill Chuck $36.99

PRO LIVE CENTERS Rare Earth magnet holds 7 changeable tips Ball bearing live center sets include 3/8” & 3/4” cone points, 1/2” pointed cup center, 11/16” open cup center with removable 5/16” stud post, 9/16” cup & 11/16” cone cup in a plastic case.

191173 191172

2MT Pro Live Center 1MT Pro Live Center

$59.99 $59.99

LONGWORTH CNC PHENOLIC CHUCKS Owning a Longworth lathe chuck used to mean trying to build your own from scratch. Now you can get this high-quality, ready to use, Longworth Chuck made from durable phenolic resin. The accurate CNC machining of this chuck ensures the disc plates rotate smoothly for adjusting the clamping dia. of the chuck.

The chuck mounts onto your lathe using your existing 4-jaw scroll chuck with #2 jaws. They grip the Longworth chuck’s 2-1/4” x 3/8” thick mounting plate, holding the Longworth chuck to your lathe eliminating the need to change chucks, switch jaws and/or move buttons. The 1” tall WASHERS NUT compressible silicon rubber buttons are non-marring. A quick BOLT WASHER twist of the wing nuts locks the BUTTON (GRIPPER) PLATES plates together & compresses the rubber buttons to finalize the grip on your work piece.

Max. safe operating speed of the Longworth Chuck is 600 RPM. Chuck size refers to the dia. of the phenolic disk.

190301 190302 190303 190304

10” Longworth Chuck 12” Longworth Chuck 14” Longworth Chuck 16” Longworth Chuck

$149.99 $159.99 $184.99 $189.99

JOHN JORDAN HOLLOW TURNING TOOLS

Frustrated by the lack of hollowing tools available, professional turner John Jordan created his own line of tools.

Unlike with most hollowing tools, John has aligned the actual cutting edge with the centerline of the tool.

This minimizes the risk of the cutter catching unexpectedly & ruining your work. All the tools have a 3/16” HSS removable cutter tip that is easily sharpened by hand or with the sharpening jig. The 3/4” dia. hook tools come in two shapes: the #1 hook is 15-1/2” long & suited for most hollowing tasks & the #2 hook is 19-1/2” long with a gentler bend for reaching further into larger vessels. The 1/2“ dia., 12” long hook tool is perfect for hollowing smaller vessels.

Two straight-shanked tools: 3/4” x 20” and 1/2” x 12” are available for initial hollowing cuts on your projects. All the Jordan tools have a black oxide finish & are sold unhandled.

199934 199935 199936 199937 199938 199939 199940 199941

3/4” #1 Jordan Hook Tool 3/4” #2 Jordan Hook Tool 3/4” Jordan Straight Tool 1/2” Jordan Hook Tool 1/2” Jordan Straight Tool Jordan Sharpening Jig Jordan Hook Tool Repl. Tips Jordan Straight Repl. Tips

$79.99 $84.99 $54.99 $44.99 $34.99 $24.99 $4.99 $3.99

JOHN JORDAN TOOL HANDLES These tool handles are made from 1/8” thick, 1” OD steel tubing with plenty of heft to help stabilize cutting action. A neoprene covering dampens vibration & is comfortable for extended use. The Arm Brace Handle is 18” long with a 20° bend to provide optimal benefit with the lathe spindle height at or slightly above your elbow height. All handles accept 3/4” shanks, & the 12” & 18” lengths include a 1/2” bushing adapter. Allen head screws secure your tool shank into the handle.

199930 199931 199932 199933 199942

Jordan 12” Tool Handle Jordan 18” Tool Handle Jordan 24” Tool Handle Jordan Arm Brace Handle Jordan 1/2” Adapter Bushing

$39.99 $49.99 $59.99 $79.99 $4.99

34 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

EASY WOOD TURNING TOOLS Designed with the beginning woodturner in mind, Easy Wood Tools are simple to use compared to traditional round shank turning tools.

The square shank on the Easy Wood Tools always has the tool riding dead flat on the tool rest. When cutting, the tool’s handle is kept parallel to the floor & the cutter is simply moved straight into the work. This easy technique is a boon to turners struggling with standard turning tools.

Long lasting multi-sided carbide cutter tips are easily replaceable. All tools have maple double grip handles & copper ferrules.

Carbide cutting tips come in three shapes; square for roughing & making square shoulders, round for finishing & diamond for detailing. (A 4th shape*, only on the Full-Size Rougher, is square, but with a slight radius on each cutting edge for light finishing & inside bowl work.)

The Mini (3/8” x 4” tool & 12” handle) is for pens & other small scale turning.

The Mid-Size (3/8” x 7” tool & 16” handle) is for turning bowls on mini-lathes.

The Full-Size (1/2” x 8-1/2” tool & 16” handle) is for work on larger lathes.

EASY WOOD HOLLOWER NO. 3 The Easy Hollower No. 3 has a wide steel shank to stabilize it during hollowing. It uses the same carbide Ci3 round cutter as the Mini & Mid-Size Finishing tools. It is great for hollowing vessels up to 5” in dia. The 1/2” x 1” x 9-1/2” long shank is mounted in a 16” Easy Grip Handle. OAL 25-1/2”.

143328 EWT Full-Size Easy Hollower No. 3 $149.99

ONEWAY 4-WAY LIVE CENTERS The finest live centers we sell.

These live centers have long wearing, heavyduty, dual ball bearings and include a cup center with replaceable point (plus knock-out bar) and two threaded cones (1-11/16” & 3-7/16” max. dia.) so you can easily mount & center work with drilled center holes.

180331 180332 180333

#1MT Oneway Live Center #2MT Oneway Live Center #3MT Oneway Live Center

$120.99 $120.99 $120.99

143301 EWT Mini Easy Rougher $89.99 143302 EWT Mini Easy Finisher $89.99 143303 EWT Mini Easy Detailer $89.99 143304 EWT Mid-Size Easy Rougher $119.99 143305 EWT Mid-Size Easy Finisher $119.99 143306 EWT Mid-Size Easy Detailer $119.99 Replacement & Optional Cutters for EWT Mini & Mid-Size 143322 Ci2 Square Roughing Cutter (M & M) $13.99 143323 Ci2 R2 Square Finishing Cutter $14.99

w/2” radius (M & M) 143324 Ci3 Round Finishing Cutter (M & M) $16.99 143325 Ci4 Diamond Detail Cutter (M, M & F) $18.99 143307 EWT Full-Size Easy Rougher* $124.99 143308 EWT Full-Size Easy Finisher $139.99 143309 EWT Full-Size Easy Detailer $129.99 Replacement & Optional Cutters for EWT Full-Size 143319 Ci1 Square Roughing Cutter (F) $13.99 143318 Ci0 Round Finishing Cutter (F) $18.99 143320 Ci1 R4 Square Finishing Cutter $13.99

w/4” radius* (standard w/ Full-Size Rougher) 143321 Ci1 R2 Square Finishing Cutter $13.99

w/2” radius (F) 143325 Ci4 Diamond Detail Cutter (M, M & F) $18.99

TERMITE TOOL FROM ONEWAY Ring tools excel at hollowing & finishing end grain. The Termite's HSS bits have computer-optimized geometry & are milled precisely on computer-controlled machines. The result is a fastcutting, easily maintained tool with great versatility.

The Termite Kit comes with 2 bits (3/8” & 1/2” dia.), a grinding point, a bit holding block & sharpening instructions. 7-1/2” shank. 15-1/2” hardwood handle.

141525 141526 141527 141528 141529 141530

Oneway Termite Kit 5/8” Termite Bit Replacement 3/8” Termite Bit Replacement 1/2” Termite Bit Replacement Grinding Point Termite Grinding Block

$93.99 $26.99 $22.99 $24.99 $6.99 $10.99

EXTERNAL INTERNAL ONEWAY 4-JAW SCROLL CHUCKS FOR THE LATHE CHUCKING CHUCKING Oneway’s self-centering scroll chucks provide secure gripping power & versatility when holding stock for turning. The Talon, our most popular model, & the Stronghold model operate with a large T-handled chuck key.

The Oneway chuck uses 2 lever bars to operate the jaws & can be used on almost any lathe. A variety of optional jaw sizes gives these chucks a very wide grip range. Threaded mounting adapters, sold separately, insert into the chuck body, which then screws onto your lathe’s spindle. Extra adapters offer a very economical way to use the same chuck on different lathes. Talon & Oneway chucks accept adapters up to 33mm. Only the Stronghold ONEWAY CHUCKS (Body only; order mounting adapter separately) Chuck uses 1-1/2”-8 mounting adaptMODEL DIA. WEIGHT OPERATION STD. JAW CAPACITY PRICE ers. Chucks include #2 profile jaws, 181100 Talon 3-1/2” 2.85 lbs geared ext. 1-5/8–2-7/8”, $206.99 operating key or levers, instructions & key Scroll Chuck int. 2–3-1/2” a 1/2” x 1-1/4” Woodworm screw.

181200 Oneway 4” 3.35 lbs 2 levers Scroll Chuck 181300 Stronghold 4-1/2” 6.75 lbs geared key Scroll Chuck

ext. 1-5/8–3”, $173.99 int. 2–3-5/8” SCROLL CHUCK ext. 2–3-1/2”, $261.99 MOUNTING ADAPTERS int. 2-5/8–4-1/8” Add last 2 digits of catalog number from the mounting adapters (listed in red) below.

The most popular optional jaws for Oneway’s scroll chucks are listed 1801__ Talon & Oneway Chuck Adapters $25.00 below. Go to our website for a complete selection of optional jaws.

1802__ Stronghold Chuck Adapters $25.00 OPTIONAL JAWS FOR TALON SCROLL CHUCKS 01 5/8” Plain Shopsmith 181112 Profiled Spigot ext. 1/4–1-5/8”, int. 1–2-3/8” $40.99 02 3/4”–16tpi Sears, Record OPTIONAL JAWS FOR TALON & ONEWAY SCROLL CHUCKS 03 1”–8tpi Delta, Jet, General 160 (capacity listed approximate * to 1/8”, or ** to 1/4”) 06 1-1/4” – 8tpi Powermatic, General 260 181111 #1 Profiled Step ext. 3/8–1-7/8”, int. 1–2-1/2” $40.99 07* 1-1/2” – 8tpi Conover 181116 Mini Jumbo ext. 2–7-7/8”, int. 4–9-7/8”** $93.99 08* 1-1/2” – 8tpi Powermatic 90 181117 Jumbo ext. 2–10-3/4”, int. 4-7/8–11-3/4”** $104.99 09 33mm–3.5tpi Oneway, Hegner *FOR STRONGHOLD CHUCK ONLY OPTIONAL JAWS FOR STRONGHOLD SCROLL CHUCKS 181312 Profiled Spigot ext. 3/8–2”, int. 1-1/8–2-5/8” $48.99 SCROLL CHUCK ACCESSORIES 181320 #4 Profiled ext. 4-1/4–5-3/4”, int. 4-7/8–6-1/2” $58.99 180111 1/2” x 2” Woodworm Screw $26.99 181317 Jumbo ext. 2-3/4–11”, int. 4-3/4–12” $104.99 180112 1” 4-Spur Chuck Drive Center $35.99 181318 Mega Jumbo ext. 1-3/4–14”, int. 4-3/4–15” $126.99 180114 Extra Buttons for Jumbo Jaws $25.99

OPTIONAL JAW STYLES Profiled style jaws flair at the top & are toothed for maximum holding power with minimum damage to the piece. Spigot jaws are 1” deep to better grip smaller parts.

SEE OUR SELECTION OF ONEWAY LATHES AT HIGHLANDWOODWORKING.COM 35

Safety Equipment

Mag-Safe Bifocal Safety Glasses $15.99 ea.

MAGNIFYING SAFETY GLASSES

Diopter Diopter Diopter 851203 1.50 851205 2.00 851207 2.50 Now you can match or exceed the prescription in your reading glasses for everyday shop work — imagine being able to see 64ths Mag-Safe Full Lens Safety Glasses $15.99 ea. again! Side shields are built into each temple. All Mag-Safe glasses 851210 1.25 851211 1.50 851212 1.75 meet or exceed ANSI Z-87 specifications.

851213 2.00 851214 2.50

bifocal or full lens magnification

MAGNI-FOCUSER® FLIP-UP MAGNIFIERS Get a clear, sharp, hands-free look at your work with this comfortable, adjustable, flipup magnifier. The binocular lens assembly accommodates eyeglasses. Focus distance of 1.75X Magni-Focuser is 12”-14”. Bifocal Magni-Focusers have 1.75X upper lenses, & 2.25X lower lenses with roughly 8” focal length, perfect for close focus jobs.

533038

1.75X Magni-Focuser

$25.99

533039

SAFETY EYEWARE Safety eyeware features adjustable temples & anti-fog & scratch resistant coatings. Safety Glasses have tough nylon frames & wraparound polycarbonate lenses. Overglasses fit over prescription specs, with clear side shields & distortion free wide-angle vision.

485072 485097

Fog-Free Safety Glasses Fog-Free Safety Overglasses

$6.99 $9.99

WORKTUNES RADIO & MP3 READY HEARING PROTECTORS Quality earmuffs with AM/FM stereo radio (digital tuner w/LCD display) have an input jack to accept external components like MP3 & CD players.

Noise reduction is 22db. Max. output for the radio or connected component is a safe 87db. Includes 44” cord with 1/8” male stereo plugs at ends.

Runs approx.100 hours on 2AA batteries (not included).

156562

i3 WorkTunes Hearing Protectors

$99.99

PELTOR H10 OPTIME 105 EARMUFF

Simply the best we’ve ever used!

Extraordinarily comfortable foam ear cushions provide a soft, low-pressure seal against the head, even when wearing eyeglasses. An adjustable stainless wire harness self-aligns to the shape of your head, seating the ear cups securely & evenly. 30dB noise reduction.

156552

Peltor H10 Optime 105 Earmuff

$29.99

PELTOR H9A OPTIME 98 EARMUFF Peltor’s H9A model earmuffs have a 25dB noise reduction rating & a more compact profile than the H10 model.

The stainless steel headband harness self-aligns to the shape of your head, seating the foam ear cushions securely.

Their bright yellow color makes them easy to find.

156553

Peltor H9A Optime 98 Earmuff

$18.99

Bifocal Magni-Focuser

$36.99

CHILD-SIZED SAFETY GLASSES Protect your young’uns eyes while they’re working alongside you with their very own safety glasses.

818349

Child-Sized Safety Glasses $4.99

DELUXE FACE SHIELD WITH RACHETING HEADGEAR

Recommended for the lathe Best for full face protection. Headband adjusts to all sizes. Shield flips up when not in use. Racheting adjustment knob on the headband quickly guarantees a good fit.

487009 487010

Faceshield w/Racheting Headgear Repl. Shield $7.99

$24.99

PELTOR JUNIOR SIZED EARMUFFS These comfortable junior earmuffs are sized to fit younger/smaller heads. Rated for a 22 db noise reduction, they have an adjustable stainless steel padded headband & liquid foam ear cushions.

Accommodates young toddlers to petite adults.

156564 156565

Peltor Junior Sized Earmuffs / Pink $19.99 Peltor Junior Sized Earmuffs / Blue $19.99

PUSH BLOCKS Recommended for

surface-jointing or work with small stock

Soft, long-wearing foam pads securely grip stock. Canted handles make it easy to work next to a fence.

431019 168002

Pair of Push Blocks (3” x 6”) Standard Push Stick (11” long)

$7.99 $5.99

168010

Power Hands™ Push Stick

$29.99

POWER HANDS PUSH STICK The 13” long Power-Hands™ push stick has 2 replaceable rubber treads: flat for table saw & jointer, & V-shaped for simultaneous down & in pressure on shaper or router table.

Spring-loaded rear pin retracts for use as a push block on flat surfaces. Not for use on stock less than 3/4” wide.

Sizes run CHEMICAL RESISTANT SUPER TOUGH NITRILE DISPOSABLE GLOVES a little small These nitrile gloves are far more 196031 50 Pair Nitrile Gloves, Medium $14.99

puncture and tear resistant than latex gloves, & are immune to most solvents, including agents that eat latex. Lightly textured for excellent feel & handling.

CARVERS' CUT-RESISTANT KEVLAR GLOVES Light, supple DuPont Kevlar® fiber makes these knit gloves virtually indestructible. For carving & whittling, or whenever you handle very sharp edges, they will nearly eliminate the possibility of inflicting slicing cuts on your hands (sharp points can stab through the knit). “One size fits all.” Machine washable. Not for use with power tools.

128264

Cut-Resistant Kevlar Gloves (pair) $14.99

196032 196033 196034 196025

50 Pair Nitrile Gloves, Large $14.99 50 Pair Nitrile Gloves, X-Large $14.99 50 Pair Nitrile Gloves, XX-Large $14.99 Wall Mount Glove Dispenser $8.99

ANTI-VIBRATION GLOVES Tired of vibrating hands & bruised palms? Try these fingerless gloves!

Durable, non-slip leather covers a visco-elastic polymer palm liner that absorbs vibration & disperses shock. Stretchy cotton-Lycra back maintains a snug fit. One size fits medium to large hands.

128270 128271 128272

Anti-Vibe Glove, Right Only Anti-Vibe Glove, Left Only Pair Anti-Vibration Gloves

$18.99 $18.99 $35.99

36 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

est.

1978

HIGHLAND Woodworking

fine tools & education

www.highlandwoodworking.com 24 hour order line (800) 241-6748 Service problems & requests for technical information please call: (404) 872-4466 Charge cardholders may order by phone or fax 24 hours a day.

Prices in this catalog are effective April 1, 2013

PLEASE PRINT CLEARLY ORDERED BY

CUSTOMER NO. __­­_­_­­­__­­­_____­­­_­_­__­­___________________­__­­_­_­­_­_­__ (from catalog address label) NAME ____________________________________________________ ADDRESS _________________________________________________ CITY ______________________________ STATE ____ ZIP ___________ TEL /DAY (__­_____)_____________ NIGHT (_______)____________

IF AN ITEM IS OUT OF STOCK: E-MAIL ___________________________________________________ Back order & ship as soon as possible Cancel order for that item SHIP TO Mail To: HIGHLAND WOODWORKING NAME ____________________________________________________ 1045 N. Highland Ave, NE Atlanta, GA 30306-3592 ADDRESS _________________________________________________ Payment must accompany order. We do not ship C.O.D. Please select payment method. CITY______________________________ STATE ____ ZIP___________ MasterCard DATE OF ORDER__________________________________________ Discover Visa CARD EXP NUMBER DATE Am Ex MO YR Check SIGNATURE _______________________________­­­­­­­­­­­­­­______________________________________­­­­­­­­­­­­­­­­­­­­­ Money Order Catalog Item Number Qty

Description

Price Each

E-mail:

customerservice@highlandwoodworking.com

Charge cardholders may order by phone or fax 24 hours a day.

Phone (800) 241-6748 Metro Atlanta callers dial: (404) 872-4466 Fax (404) 876-1941



CALCULATE STANDARD SHIPPING* Merchandise Total........... S&H Up to $15.00....................$5.99 $15.01 to $30.00.............$7.99 $30.01 to $50.00.............$8.99 $50.01 to $80.00.............$9.99 $80.01 to 100.00...........$11.99 $100.01 to $200.00.......$12.99 Over $200.00.................$13.99

Amount

MERCHANDISE SUBTOTAL

STANDARD SHIPPING CHARGE*

SHIPPING SURCHARGE

ORDER SUB-TOTAL GEORGIA DELIVERIES ONLY add local sales tax on order total, including shipping charges.

*

TOTAL AMOUNT ENCLOSED

Shipping charges apply to ground shipments within the 48 contiguous United States only. If shipment is to Alaska or Hawaii, or to Canada or another foreign country, additional shipping & handling charges may apply.

As indicated in the catalog description of the item, some items will ship with either a separate truck shipping charge, or with a surcharge added to the standard shipping for your order. See truck shipment info on the back of this form.

We do not ship combustible materials by air. This applies to items flagged with this symbol.

Conditions of Sale PRICES

Prices in this catalog are effective April 1, 2013. Though we attempt to hold them until publication of the next catalog, prices are subject to change at any time due to foreign exchange rates & manufacturers’ price changes. Check our website at highlandwoodworking.com for price updates. Typographical errors are subject to correction.

Place your order online via our secure server @ www.highlandwoodworking.com Or by phone 24-hour, toll-free 800-241-6748 Metro Atlanta callers please dial (404) 872-4466

Or mail in your order form (reverse)

We do accept written purchase orders (via mail, email or fax) for open billing from schools & gov’t organizations only.

Actual packing & shipping charges will be added to invoiceplease call to confirm total charges.

IWASAKI CARVING FILES Referred to as joinery or plane maker floats, these files are a woodworker’s dream for shaping, sculpting, easing hard edges & joinery tuning. They remove material quickly like a rasp, but leave a very clean surface finish like you’d get from a file. The curved teeth are arranged like a single cut file, but with the face of each tooth shaped like a mini-chipbreaker. The wood shaving breaks off & is forced up & away from the face of the file so the teeth are less prone to clog. The tailings created are not dust, but ultra mini-shavings & look as if they came from a tiny plane! The teeth are sharp & hard for efficient cutting & long life. Besides cutting standard woods, they can be used on bamboo, OSB, MDF, plastics & resins.

CUSTOMER SERVICE

Inquiries for specifica­tions, technical information, & order tracing should be addressed to our Tool Customer Service Department at (404) 872-4466 or e-mail us at

customerservice@highlandwoodworking.com

SPECIAL ORDERS

Orders for non-stock items, or for custom-made products such as custom length bandsaw blades, must be paid in full at time of order. Returns of non-stock & custom items may be subject to a re-stocking charge.

SALES TAX

No tax applies to orders outside of Georgia. Deliveries within Georgia are subject to local sales tax on order total, including shipping charges.

SHIPPING CHARGES

Shipping Charges for most items are based on the amount of your order. See standard shipping info & rates on page 37.

Special services may entail additional charges. Overnight and other expedited ship methods are available for most items for an additional charge.

TRUCK SHIPMENTS

Items flagged with this logo are shipped by truck. To provide you with the best rate for your truck shipment, we extend our corporate discount with the trucking companies directly to you.

On our website you’ll find a truck shipping rate calculator listed with the item, for calculating truck shipping charges. If you do not have internet access, call us to get a truck shipping rate quote at 800-241-6748. (Some destinations may require a pickup from a freight terminal.)

RETURNS

If you are unsatisfied with any stock item, you may return it postage prepaid within 60 days of receipt (30 days for Festool items). Package it securely, include all original packing materials & address it to:

Highland Woodworking Returns 1045 N. Highland Ave NE Atlanta, GA 30306

Include in the package the order number, your full name & address, the reason for returning, & whether you prefer a replacement or a refund.

FOR OUR CUSTOMERS IN CALIFORNIA, PLEASE NOTE: Out of an abundance of caution, Highland Woodworking has elected to provide the Prop. 65 warning notification that alerts consumers that some products sold in this catalog, on our website & in our retail store, may contain chemicals known to the state of CA to cause cancer, birth defects or other reproductive harm. Highland Woodworking has elected to provide this warning for all products shipped to CA based on knowledge about the presence of one or more listed chemicals, without attempting to evaluate the level of exposure.

FILE HANDLES Hardwood handles with nickel plated steel ferrules.

475630 475631 475632 475634 475633

A 3-3/4” Long (Triangular Files) B 4-1/8” Long (Round Files) C 4-1/2” Long (8” Mill Files & Rasps) D 4-7/8” Long (10” Half Round Files) E 5-1/4” Long (10” & 12” Mill Files & Rasps)

$2.50 $2.50 $2.50 $2.99 $3.50

AVAILABLE IN MEDIUM, FINE & EXTREME FINE CUTS.

8” files 'with handle', have a close fitting, textured grip rubber handle & 4” of cutting teeth. Unhandled 8” styles have 7” cutting length & 6” files have 5”.

(Files without handles have a tang.) Half round styles only have teeth on one side. All files have safe edges (no teeth on the edges) & are perfect for detailing up to an adjacent surface you don’t want to cut.

All sizes are approximate due to metric conversions.

Size listed is OAL. W indicates file width.

127503 8” Flat Medium (3/4” w) $29.99 127504 8” Half Round Medium (3/4” w) $29.99 127509 8” Flat Fine (3/4” w) $34.99 127511 8” Half Round Fine (3/4” w) $34.99 127510 8” Flat Extreme Fine (3/4” w) $36.99 127512 8” Half Round Extreme Fine (3/4” w) $36.99 127501 8” Flat Medium with handle (5/8” w) $19.99 127502 8” Half Round Med. w/handle (5/8” w) $19.99 127505 6” Flat Fine (5/8” w) $31.99 127507 6” Half Round Fine (5/8” w) $31.99 127519 6” Fine File Set $49.99

(Set includes 6” Flat Fine, 6” Half Round Fine &

2 wooden handles. A $69 Value – Save $18.99!)

127506 6” Flat Extreme Fine (5/8” w) $32.99 127508 6” Half Round Extreme Fine (5/8” w) $32.99 127513 8” Flat Extreme Fine w/handle (3/8” w) $29.99 127514 8” Half Round Ext. F. w/handle (3/8” w) $29.99

ROSEWOOD TOOL HANDLES fine retro-fits for files, chisels & other tools in need of upgrade or repair Undrilled Asian rosewood handles with turned finger grip & 1/16” thick brass ferrules with 3/16” hole for tangs. Expect some minor grain tear out due to mass production that permits affordability.

172823 Small Rosewood Handle (4” long) $2.99 172824 Large Rosewood Handle (5-1/2” long) $3.99

NAREX RASPS

These nicely priced machine-punched rasps have large teeth that take big bites for rapid stock removal. The coarse cutting teeth vary slightly in size depending on the rasp size, but not enough to grade the cut differently. Flat & half round rasps are toothed on both sides. Rasps have generous 5-1/4” to 5-1/2” long wooden handles.

NAREX RASP

147201 147202 147203 147204 147205 147206 147207 147208 147209

WIDTH

LENGTH OF CUTTING TEETH

Narex 16mm (5/8”) Flat Rasp 5” $13.99 Narex 20mm (3/4”) Flat Rasp 7” $15.99 Narex 25mm (1”) Flat Rasp 8-3/4” $19.99 Narex 6mm (1/4”) Round Rasp 5” $11.99 Narex 8mm (5/16”) Round Rasp 7-1/4” $13.99 Narex 10mm (3/8”) Round Rasp 9” $15.99 Narex 16mm (5/8”) Half-Rd Rasp 5” $16.99 Narex 20mm (3/4”) Half-Rd Rasp 7” $19.99 Narex 25mm (1”) Half-Rd Rasp 8-3/4” $24.99

38 GO TO HIGHLANDWOODWORKING.COM TO SEE OUR FULL LINE OF IWASAKI FILES

Wood Files, Rasps & Rifflers

AURIOU RASPS & RIFFLERS The teeth in Auriou’s rasps are “hand-stitched” one at a time, with a punch sized to produce carefully sized, triangular pointed teeth in an irregular pattern that prevents furrowing, providing a superior finish.

Auriou’s craftsmen prepare the rasp blanks to assure durability. Blanks are shaped by forging & hammering not stamping. Distortion caused by initial heat treating is corrected by more hand-hammering, & finally the blank is polished. G numbers indicate tooth size (grade of cut). The higher the #, the finer the cut. (#8 approximates a Nicholson #50.) Dimensions do not include the 5” walnut handle.

Modeller’s Rasps are shaped much like a cabinet rasp, but with a longer taper at the end & a slightly thinner profile, so they are a bit more nimble in the hand.

ALBI Combo Rasps are double sided. Ironing Rasps’ curved shape gives clearance for your knuckles. For ultra-fine detailing, Needle Rasps’ cutting surfaces are approx. 2-3/4” x 1/4” (flat, rat, half-round & knife).

AURIOU CABINET RASPS (Red = Left-Hand) Right H Left H Length Grade Width 124433 124753 8” 11 7/8” $109.99 124754 124755 8” 13 7/8” $119.99 124432 124469 9” 10 1” $114.99 124702 124703 10” 5 1-1/4” $124.99 124704 124705 10” 7 1-1/4” $129.99 124431 124706 10” 9 1-1/4” $134.99 124707 124708 10” 11 1-1/4” $139.99 124709 124710 12” 4 1-1/2” $129.99 124460 124711 12” 6 1-1/2” $134.99 124430 124712 12” 8 1-1/2” $139.99 124713 124714 12” 10 1-1/2” $149.99 124715 124716 12” 12 1-1/2” $159.99 AUROIU MODELLER RASPS (Red = Left-Hand) 124717 124718 6” 15 7/16” $119.99 124756 124757 7” 10 1/2” $99.99 124435 124719 7” 13 1/2” $109.99 124758 124759 10” 9 29/32” $129.99 124760 124761 10” 11 29/32” $139.99 124762 124763 10” 13 29/32” $149.99 AURIOU ALBI COMBO RASP (Red = Left-Hand) 124742 124743 8” 11 & 14 3/4” $99.99 124740 124741 10” 5&9 1” $114.99 AURIOU CURVED IRONING RASP (Red = Left-Hand) 124720 124721 2-3/4” 12 3/8” $66.69 124436 124765 3-1/4” 8 3/4” $66.69 AURIOU CURVING RASP 124748 10” 7 7/8” $85.99 AURIOU RAT TAIL RASP 124463 6” 13 1/4” $89.99 124701 10” 9 3/8” $99.99 124471 7” Long Auriou 4-Pc Needle Rasp Set $179.99 124749 RH Auriou Chair Sculpting Rasp Set $349.99 124750 LH Auriou Chair Sculpting Rasp Set $349.99 Recommended by Charles Brock -12” G10 Cabinet Rasp, 10” G5 & G9 Combo Rasp & 7” G13 Modeller Rasp AURIOU RIFFLERS KNIFE & SPOON Modeller Rasp Length Grade 124464 6” 14 $74.99 124450 8” 12 $74.99 124466 10” 10 $89.99 FLAT V & RECTANGLE 124451 8” 12 $74.99 ALBI Combo HALF ROUND & TRIANGLE Rasp 124465 6” 14 $74.99 124453 8” 12 $74.99 Riffler 124467 10” 10 $89.99

NICHOLSON MAGICUT FILES For tuning card scrapers, tool shaping prior to heat treating & work on hardwoods & high pressure laminates.

Magicut files remove stock quickly like a double cut file, but leave a smooth surface like a single cut. “Magicut” refers to a complex pattern of steep angled serrations separated by narrow chip breakers. Alter your angle of attack to control the aggressiveness of the cutting & achieve the smoothness you want.

124421 124422 124423 124424

8” Tapered Magicut File 10” Tapered Magicut File 12” Tapered Magicut File 14” Tapered Magicut File

$10.99 $13.99 $18.99 $24.99

NICHOLSON PATTERNMAKER'S RASPS Highly efficient cutting makes a smooth surface finish unfeasible with standard wood rasps. #49 is a 2nd cut rasp finer than regular cabinet rasps, #50 is smoother yet. Each has a flat & a curved side, & tapers in width.

124407 124408

#49 Rasp (10” long) $45.99 #50 Rasp (10” long) $52.99

WOOD FILES These files are coarser than metal files & have uniform teeth for stock smoothing.

124409 124410

124401 124402 124403

10” Half-Round Wood File $17.99 10” Round Wood File (dia. 3/8”) $9.99

WOOD RASPS Well-made coarse bastard wood rasps.

Flat Wood Rasp (10” long) $19.99 Half-Round Wood Rasp (10” long) $19.99 Round Wood Rasp (10” long, 3/8” dia.) $23.99

CABINET RASPS These 2nd cut cabinet rasps have finer teeth & a more controlled cut than the wood rasps above. Each has a half-round cross-section with single cut teeth on the edges. Shorter rasps have smaller, finer teeth.

124404 124405 124406

8” Cabinet Rasp 10” Cabinet Rasp 12” Cabinet Rasp

$21.99 $24.99 $29.99

SHINTO SAW RASP 10 sawblades waffled together make a 1-1/8” wide surface for fast stock removal & clean-up work. 2-sided 10” blade (coarse & very fine) reverses easily with cam-action. Top handle gives extra power & control.

126401 126402

Shinto Saw Rasp (OAL 15”) $32.99 Replacement Blade $21.99

NEEDLE FILES Set of 6 #2 cut needle files made of fine Sheffield Tool Steel meet the exacting requirements of toolmakers & jewelers.

123003

Needle File Set of 6 (in plastic case) $25.99

AUGER BIT FILE

Smooth surfaces won’t damage adjacent surfaces

This 7” flat file has tapered ends: one has cutting teeth on the faces & the edges left uncut; the other has cutting teeth on the edges & the faces left uncut.

424414 Auger Bit File $13.99

SET OF 8 BENT RIFFLERS Small double-ended rasps.

126006

Set of 8 Rifflers (approx. 7” OAL) $19.99

FILE CARD Wood brush with steel bristles on one side & synthetic on the other cleans rasps & files.

126007

File Card

$8.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR FULL LINE OF AURIOU RASPS 39

Gränsfors Bruks Hand Made Swedish Axes

The Swedes are the world’s greatest axe enthusiasts, & Gränsfors Bruks is one of their finest forges.

Each axe is carefully forged by an experienced smith who proudly stamps his initials on the head next to the company logo & each smith is introduced in the booklet accompanying every Gränsfors Bruks axe. After forging, blades are ground to a 25° bevel & honed to a razor edge. Each axe is fitted with a tight-grained hickory handle & provided with a grain-leather sheath with snap fastener.

GRÄNSFORS BRUKS MINI BELT HATCHET This petite Swedish beauty has a 2-1/2” face, 10-1/2” long hickory handle, & 11 oz. weight, which combine for perfect balance & a sweet swing. It’s great for sculpting & carving, or for taking on a camping trip for splitting kindling.

125843

Gränsfors Mini Belt Hatchet

$160.00

GRÄNSFORS BRUKS WILDLIFE HATCHET This little hand axe is perfect for splitting sticks at the campfire, & for shaving kindling. 14” hickory handle. 1 lb. head with 3” face.

125810

Gränsfors Wildlife Hatchet

$112.00

GRÄNSFORS BRUKS AMERICAN FELLING AXES These first-class full size axes for felling trees & sectioning logs are based on a classic colonial American pattern. Standard hickory handles have a gently curved belly and back with a flared knob end to secure the handle in your hands. The straight handle model provides an easy “slide” for the handle through the hands, so is best when working with no bystanders. Head with 4-1/2” face, weighs 3 lbs.

125835 125838 125869

GB 31” Handle American Felling Axe $190.00 GB 35” Handle American Felling Axe $190.00 GB 31” Straight Handle $190.00 American Felling Axe

GRÄNSFORS BRUKS TRADE AXES Forged by master blacksmith Lars Enander The French Trade Axe is based on axes used by the French when trading with Native Americans. It has a 5-1/2” head with a 3” edge & weighs 1.5 lbs. The slightly larger & heavier British Trade Axe’s 6” head has a 3-1/2” edge & weighs 2.1 lbs. Both have 19” rough sanded straight hickory handles mounted in tapered eyes without wedges, for easy replacement. Primarily intended for throwing, they can also be used for chopping.

125841 125842

Gränsfors French Trade Axe Gränsfors British Trade Axe

$290.00 $290.00

GRÄNSFORS BRUKS CARVING AXE

When efficient production & a rough-hewn texture are your goals.

This axe has a wide 4-1/3” curved edge carried well above the eye. 14” long textured handle. 2 lb. head.

125808

Gränsfors Swedish Carving Axe

$179.00

GRÄNSFORS BRUKS CARPENTER'S AXE The cutting edge of this axe is straight with a low blade angle. The curve on the lower edge of the head permits an excellent hand grip. Works well in dry wood for dimensioning and whittling; much like a good heavy knife. The head weighs 1-1/2 lbs. Face is 3-1/2” with an 18” handle.

125811

Gränsfors Carpenter’s Axe

$125.00

GRÄNSFORS BRUKS SPLITTING AXES Unlike more common mauls, the splitting axe’s blade starts off concave & fairly thin, allowing easy penetration into wood, where the thickening axe head exerts enormous splitting pressure. With a 2-1/2 lb. head, 2-1/2” face & 20” textured hickory handle, the Small Splitting Axe, is ideal for splitting kindling & small stove wood. It can be used onehanded. The Large Splitting Axe, with 3-1/2 lb. head, 3” face & 27” handle, is a superb general-purpose firewood maker. A steel sheath beneath the head reinforces the handle against impact with the wood. The axes’ polls aren’t hardened for use as sledges.

125834 125821

Gränsfors Small Splitting Axe Gränsfors Large Splitting Axe

$143.00 $158.00

GRÄNSFORS BRUKS HUNTER’S AXE This beautiful, well-balanced tool has a curved The only axe to win an award face, a thin head from the Swedish Society & gently rounded of Crafts & Design. poll. The handle’s lower half is textured for good grip (it looks as if it were peeled by beaver’s teeth). Face is 3-1/4” wide; handle is 19”; head weighs 1-1/2 lbs.

125827 Gränsfors Hunter’s Axe $171.00 We offer many other styles of Gränsfors Bruks’ Axes: Broad Axes for squaring timbers, Special Ancient Edition Axes, Lugged Chopping Axes, Bearded Axes, Battle Axes & more!

GRÄNSFORS-BRUKS SHARPENING TOOLS

Keep your axe in good cutting order without toting your whole sharpening kit into the woods.

The regular file & diamond file have leather sheaths & 3” cutting faces with flared beech handles to keep your fingers safe. The regular file is single cut with “safe” (toothless) edges.

The 2-1/4” dia. 2-sided (coarse & fine) 125853 Axe Sharpening File $50.00 sharpening stone is in a friction-fit rubber case 125854 Diamond Axe Sharpening File $72.00 that leaves half the case on for a secure grip as you hone. 125855 Axe Sharpening Stone $50.00

GRÄNSFORS BRUKS DOUBLE BIT AXES These stunning double-bit axes have exceptional balance. Both have 3 lb. heads & 6” faces. The Double Bit Felling Axe has a 35” handle with a swelled knob and excels at felling and trimming. The Throwing Axe has a straight 29” handle for smooth release when target throwing (includes competition axethrowing rules & address of the Swedish Axe Throwing Society).

125825 125836

Competition Throwing Axe Double Bit Felling Axe

$229.00 $229.00

GRÄNSFORS BRUKS FOREST AXES These axes are designed for limbing felled tress, splitting sticks & chopping limbs for fires. The Small Forest Axe is similar in size & heft to the Hunter’s Axe, with 19” handle, 1-1/2 lb. head & 3-1/4” face. The traditional Scandinavian Forest Axe is a professional-size axe with a thin, curved 3-1/2” face sharpened specifically for cutting fresh, resinous wood. 25” handle. 2 lb. head.

125813 125820

Gränsfors Small Forest Axe $120.00 Gränsfors Scandinavian Forest Axe $130.00

40 CHECK OUR WEBSITE FOR A COMPLETE LISTING OF GRANSFORS BRUKS AXES

Ox-Head Axes Ox-Head axes have

been made in Wuppertal, Germany since 1781.

Each axe is expertly manufactured to the highest standards. Careful hardening of the steel accounts for the long-lasting sharpness of their tools. Ox-Head is the official supplier of axes for the Stihl Timbersports Series.

OX-HEAD CAMP HATCHET This heavy duty hatchet is forged from a single piece of steel & has a finely polished head & comfortable plastic handle.

Includes leather sheath with belt loop & 2 sturdy snap closures. 4-1/2” wide blade. Weighs 2 lbs.

129610

Ox-Head Camp Hatchet $49.99 (manufactured in Asia for Ox-head.)

OX-HEAD CARPENTRY HATCHET With its wide, thin blade & 15” ash handle, this is an excellent trimming tool for carving blanks that need paring or shaping before fine work can begin. 2.4 lbs. 5” edge.

129624

Ox-Head Carpentry Hatchet

$79.99

OX-HEAD BROAD AXES Well suited to squaring timbers, these axes have a flat-sided head with a chisel-sharpened, single bevel edge. The right hand axe has the flat face on the left hand side of the axe so that you can chop flush on the right side of the workpiece. Both have slightly bent 15-3/4” American hickory handles & 2.2 lb. heads with 5-1/2” cutting edges.

129705 129706

Ox-Head Right Hand Broad Axe Ox-Head Left Hand Broad Axe

$94.99 $104.99

OX-HEAD FELLING AXES

Designed for efficient felling & limbing of trees.

These axes’ cutting edges are very thin, & taper quite slowly back towards the eye.

This minimizes the axe’s wedging action as it cuts, letting it take satisfyingly deep bites as you notch logs. (It also makes the axe head a bit vulnerable if you use it as a lever or a splitting maul.) The Small Iltis has a 1-3/4 lb. head, 5” wide blade & 28” hickory handle. Iltis Europe is a single-bit traditional German pattern with a 2.6 lb. head, a 5-3/4” blade & a 28” handle. The Double Bit axe has a 2.2 lb. head, two 5” blades & a 35” handle.

129611 Ox-Head Small Iltis Europe Felling Axe $89.99 129630 Ox-Head Iltis Europe Felling Axe $94.99 129625 Ox-Head Double Bit Felling Axe $129.99

OX-HEAD FORESTRY AXES These generalpurpose axes have thicker and heavier heads than felling axes, but have much more taper than a splitting maul. The small axe has a 2.2 lb. head, 4-1/2” wide blade, & 27-1/2” ash handle. The medium axe has a 3.5 lb. head, 5” wide blade, & 31” handle.

129627 129628

Ox-Head Small Forestry Axe Ox-Head Medium Forestry Axe

$79.99 $96.99

OX-HEAD COMPETITION AXES Ox-Head’s Competition Throwing Axe is precision manufactured & balanced for accuracy. Its double-bitted 3 lb. head is mounted to a 23-1/2” long American hickory handle. Each axe is individually numbered. The Champion Axe is one of the best chopping axes we’ve ever seen. The 6 lb. axe head is precision ground for competition chopping & through pinned to the 31-1/2” handle. Both include edge protectors.

129708 129709

Competition Throwing Axe Champion Chopping Axe

$179.99 $329.99

Axes

FIRESTONE BELT AXE This 11” long axe has a recurved, laminated birch handle that combines maximum chopping power with comfort. The relieved head shape lets you grab it like a knife for carving. The corrosion resistant 440C stainless steel head has a 4-1/2” wide cutting edge & a rolled steel pin & hex setscrew to insure it stays securely on the handle. Leather sheath has swivel belt loop & 2 sturdy snap-closures. Comes razor sharp.

125701

Firestone Belt Axe (1.6 lbs.) $149.99

FIRESTONE 18” SPORT AXE

THROWING AXE

Designed for international throwing competitions, this axe can also be used for fieldwork.

Because of its unique blade shape, it can hit a target at several angles of attack making it easy to throw. The relieved head shape lets you hold it like a knife. Its 440C stainless steel (grey finished) adjustable head moves anywhere along the 18” hickory handle & locks securely with a hex setscrew. 4-1/2” wide cutting edge.

125702 18” Sport Axe - Throwing Axe (1.5 lbs.) $69.99

Woodburning

COLWOOD WOODBURNING TOOLS The Detailer is a heavy duty solid state 37-watt temperature controller giving very precise control for any detailing tip. It includes an ultra-flex handpiece cord, a replaceable-tip handpiece with corklined grip, & 5 detailing tips (3/16” round, 1/8” tight round, 1/4” large point, .076 writing tip & a 3/16” bent tip for shading), all in a fitted case.

The economical Cub has a solid state 35watt temperature control, an ultra-flex handpiece cord, & a cable clamp to hang it up (handpieces sold separately).

Both units use Colwood woodburning tips (below) and have a 2 year warranty.

125353 125331 125330 125336 J

Colwood Woodburner Detailer $164.99 Colwood Cub Woodburner $64.99 MC Micro Point Signing Tip Fixed (.030) $18.99 C Writing Tip Fixed (.076) $13.99

A H

B K

C LE

D LM

E M

F PS

G S

SQ

COLWOOD WOODBURNING TIPS For the Cub & Detailer

Replacement Tips are unhandled interchangeable tips.

Handpieces are fixed tips mounted in cork-lined handles.

125327 Handpiece for Replaceable Tips $16.99 Style Tip Width Repl. Tip $8.50 Handpiece $13.99 J 1/8” 125332 125333 A 1/4” 125356 125334 B 1/4” 125357 125335 C 5/64” 125358 125336 D 3/16” 125321 125337 E 3/16” 125322 125338 F 3/16” 125323 125339 G 3/16” 125359 125340 H 3/16” 125360 125341 K 5/32” 125361 125343 LE 1/8” 125362 125344 LM 1/8” 125363 125345 M 3/32” 125364 125346 PS 1/8” 125365 125347 S 3/16” 125324 125348 SQ 3/32” 125366 125349

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 41

Workbench Vises

JORGENSEN RAPID-ACTING BENCH VISES Just half a turn of the handle on this vise engages/disengages a large barrel nut to the 1” acme threads. When disengaged, the “Best Overall front vise jaw slides smoothly in & Choice” out letting you hold your work with Fine Woodworking one hand while easily moving the vise jaw into position with the other. 7” x 3-1/2” jaws open to 9”; 10” jaw opens to 12”. Both have 4” jaw depth, 7/8” dia. steel guide bars & 10-1/2” hardwood handles.

Front jaw has a sliding metal bench dog. Holes on jaws are for mounting your own wooden jaw pads.

163609 163607

7” Jorgensen Rapid-Acting Vise 10” Jorgensen Rapid-Acting Vise

$159.99 $179.99

VERITAS TWIN-SCREW VISE A chain drive system ensures that the jaws stay parallel, eliminating racking common in other vises.

168042

Veritas Twin-Screw Vise Twin Screw Vise Extension Kit

Patternmaker’s Vise

$399.99

MITER VISE The massive cast iron body & jaws coupled with steel screws hold securely even during trimming & nailing.

Large aluminum knobs allow quick adjustment. The vise body rotates horizontally, & pivots from horizontal to vertical when you release a lock on the base. It even has a saw kerf space where the jaws meet (with a replaceable wooden liner) for trimming miters while workpieces are clamped in place. Made to mount on a workbench (screws not included).

It operates from either side, & a spring loaded lock pin disengages the chain for controlled skewing to equalize pressure on slightly out-of-square work. A chain cover lets you set the spindles from 11” to 20” apart. Includes enough chain for 16” spacing (adequate for benches 32” wide), 2 vise screws with handles & speed cranks, nuts, chain cover, installation hardware & instructions. An optional Twin Screw Vise Extension Kit allows screws to be mounted up to 24” on center. Max. jaw opening 12”. Wooden jaw liners not included.

417021 417022

SEE VIDEO DEMO ON OUR WEBSITE! PATTERNMAKER'S VISE Copied from the famous Emmert Patternmaker’s vise, this large, heavy & powerful cast iron bench vise has a unique mounting system. Unlock a lever & rotate the vise 180° to reveal a pair of 2” wide carver’s jaws, which stand 2-1/8” above the flat jaws to hold small or oddly shaped objects above bench level. Rotate the vise just 90° & you have open vertical clamping. Loosen another lever, & the entire vise swings upward up to 90°, putting the jaws parallel to the benchtop or at any angle in between. Main jaws are 13-3/4” wide by 5” deep, with a max. opening of 13”. The owner’s manual includes a template for marking & mortising your bench to house the vise.

168033

$259.99 $34.99

Miter Vise (13 lbs.) $64.99

WOODEN VISE HANDLE Hardwood handle with removable wooden end knobs fits all bench screws below.

114145

Wood Vise Handle (1” dia. x 12” long) $11.99

SHOULDER VISES Outfit your newly built bench or add an additional vise to your existing bench.

Shoulder vises can be used as either front vises or end vises. Heavy duty steel guide rods insure stable action.

Shoulder Vise 169131 Small 169132 Large

SCREW DIA. SCREW LENGTH

VERITAS® CARVER’S VISE

The arched base allows your work to overhang your bench, so it can be worked without obstruction.

Bolt this vise to your benchtop, or secure it with an optional bolt assembly in a 3/4” dia. bench dog hole. 3-1/2” dia. mounting plate, with 3 screw slots, is attached to a 1/2” steel rod with 3” height adjustment. Spare faceplate & mounting rods allow quick change out of workpieces.

127004 127005 127006

Veritas Carver’s Vise Dog Hole Mounting Hardware Spare Faceplate & Rod

$129.99 $14.99 $29.99

ECLIPSE QUICK-RELEASE BENCH VISES Based on Record’s historic 52/53 bench vise designs, these vises feature a quick-action lever under the drop handle which disengages the vise screw & permits instant adjustment to any point up to the vises’ max. capacity. Heavy cast iron jaws & solid steel slide rods contribute to a vise made for life-times of rugged use.

Jaws toe in slightly toward the top edge to assure positive clamping under heavy pressure. The vises’ large opening capacity allows you to fit them with heavy wooden jaws considerably wider than the vise itself. see mounting instructions on our website under the library tab

171831 7” Vise jaw width 7”, max. open 7-7/8” $129.99 171832 9” Vise jaw width 9”, max. open 10-1/4” $149.99 171833 10” Vise jaw width 10”, max. open 14-7/8” $159.99

7/8” 1-1/8”

8-1/4” 13”

OAL

WIDTH

WEIGHT

14-3/4” 7” 9 lbs.

21” 10-1/2” 19 lbs.

PRICE

$49.99 $69.99

CROSS SLIDE DRILL PRESS VISE This vise lets you hold small to medium workpieces securely on your drill press table & position them accurately under your bit. 4” jaws (1-7/16” deep) open to 3-3/4”. Max. longitudinal travel is 6” & cross travel is 4”. The x/y sliding movement allows you to zero in on your drilling target within a 24 square inch area without repositioning the vise.

(Bolting the vise to a plywood sub-base will let you easily clamp it to your drill press table.) Optional prismatic jaws have a V-notch for gripping round stock from 3/16” - 3” dia. horizontally or 5/16” - 2” vertically.

168055 168056

4” Cross Slide Drill Press Vise Prismatic Jaw

$74.99 $9.99

AURIOU FORGED HOLDFAST

The Forge De Saint-Juéry, where Auriou’s exquisite hand-stitched rasps are born, now makes a handforged bench hold down for the discriminating woodworker.

The graceful curved gooseneck head of this bench hold down is wheel-buffed to reveal a nice platinum luster, with the subtle details of the hand forging process visible just below the sheen. The forging & tempering gives it a touch of tensile spring, helping create the wedging action needed to grab your workpiece.

The head has a 6” reach & the 13” post will hold down extra thick projects. 45/64” dia. post fits snuggly into your 3/4” hole. 2.85 lbs.

126161 Auriou Bench Holdfast (14-1/4” OAL) $119.99

42 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

Workbenches & Hardware

LARGE

HOFMANN & HAMMER PREMIUM GERMAN WORKBENCHES

The workmanship that goes into these fine benches is simply outstanding.

Shoulder Vise Width/ Tail Vise Width/ Front Edge Work Surface Overall Weight Max. Vise Opening Max. Vise Opening Thickness Thickness Size Model

ALL-AROUND

COMPACT 16-1/2”

7-1/4”

14-1/2”

3-1/2”

7”

1-5/8”

51-1/2” x 20” 99 lbs.

34” high

All 4 models 71” x 22” 132 lbs.

16-1/2” 14-1/2” 3-1/2” 1-5/8” come complete, ready for as- MEDIUM 34” high 8” 7” sembly. (Just bolt the stretchers ALL71” x 23-5/8” 220 lbs.

19-3/4” 6” 4” 2” 34” high 7-1/2” 6-1/2” to the legs, & lay on the top.) AROUND The solid beech stock is clear, LARGE 19-3/4” 6” 4-1/2” 2-1/4” 85” x 25-1/2” 286 lbs.

34-1/2” high 9-1/4” 10-1/4” straight & beautifully finished.

The Compact, Medium & Large models all have a wooden jaw shoulder vise mounted flush with the left end of the bench, a tail vise that serves as a dog vise, vise handles, a pair of steel square bench dogs & a full-length tool well. Large & medium styles also have a drawer. The All-Around has round dog holes in the bench top & tail vise, with a double row of holes across the top’s width that work with the front shoulder vise. Holes along the front apron are for handling large panels & doors. Top is continuous, with no tool well. Round dogs sold separately.

114101 114102 114146 114103

Truck shipping charges apply. Contact us for a truck shipping quote.

Compact German Workbench $699.99 Medium German Workbench $999.99 All-Around German Workbench $1499.99 Large German Workbench $1699.99

COMPACT

Editor’s Choice “BEST VALUE” in FWW

MEDIUM

EUROPEAN WORKBENCHES From the Czech Republic The European Workbench, made from laminated beech, is great for those on a limited budget. The bench top is 53” x 19-11/16”, 1-3/32” thick, with a ON SALE 3-1/2” high border apron & is 33-1/2” high. A double row of round dog holes $399.99 WHILE SUPPLIES runs along the bench’s length, with a double row of dog holes across the width LAST at the front vise location. Wooden jawed shoulder vises are 14-1/4” wide & have steel guide rods for rigidity. Includes 4 round bench dogs & a convenient tool storage shelf. 103 lbs.

The Premium European Workbench, crafted from solid beech, has a 2” thick, 72-1/2” x 24” top & is 34” high (OAL with end vise is 78”). This bench has a traditional style tool tray along the rear edge that provides quick storage for hand tools. Two quick-release, shoulder vises can be mounted for either left-handed or right-handed use & have jaws drilled to accept 3/4” round bench dogs. Bench dog holes along the front & rear edges & across the bench’s ON width at the front vise, give an array of material holding options. This SALE! bench comes WITHOUT dogs. Light assembly is required, including gluing up the leg assemblies & drawer, bolting on vises & the stretchers to the legs, & the top to the base. 198lbs. See instructions on our website.

An optional in114201 53” European Workbench $399.99 $499.99 sert cabinet has an Bench ships within lower 48 states for $53 surcharge.

Truck shipping charges apply. Contact us for a truck shipping quote. open shelf & lock114203 Premium European Workbench $999.99 $1199.99 able cabinet door. Wood laminate cabinet is 47” x 17-7/8” x 18”. Weighs 61lbs. Ships 114204 Cabinet for Premium Workbench $199.99 flat packed. Assembly required.

Cabinet ships within lower 48 states for $15 surcharge.

VERITAS® WONDER DOG & PUP Amazingly useful accessories for any bench These ‘Wonders’ install into a 3/4” dia. hole & let you create a material holding system without mounting a tail vise, so (together with Veritas Round Bench Dogs) they’re perfect for retro-fitting into benches built without dogs. Dog post is 4-3/8” high; Pup is 2-5/8”. A steel spring wire keeps them from slipping. The screw angles downward 2° for secure grip. Brass clamp face is 3/4” high; post stands 7/8” above the bench.

417004

Veritas® Wonder Dog

$42.99

417007

Veritas® Wonder Pup

VERITAS® BENCH HOLD-DOWN Mounts wherever you drill a 3/4” hole in your bench top, or in the bench leg – where the hold-down becomes a panel clamp as well. Clamp screw with polished brass hex knob applies very high clamping force to secure carvings or other workpieces. Throat capacity & max. height are 8”.

417005

Veritas® Hold-Down

$84.99

JORGENSEN BENCH DOG 2” long steel post fits in a 3/4” round hole.

2-1/4” x 1” x 1/4” plate rests on top of your workbench.

163562

$37.99

VERITAS® ROUND BRASS BENCH DOGS & PUPS Round dogs are easy to retrofit into any bench. Simply drill a 3/4” hole through the bench top. Friction springs make them usable in any bench top thickness. 5° undercut face grips securely, & can be rotated to 419714 Veritas® Pair Round Bench Dogs (3/4” x 4-3/8”) $32.99 hold stock that isn’t square. 419715 Veritas® Pair Bench Pups (3/4” x 2-1/4”) $24.99

Jorgensen Steel Bench Dog

$4.99

BENCH BOLTS Heavy-duty hardware for assembling a workbench or hard-use furniture. 1/2 x 6” hex head bolts.

25 x 25mm (.984”) brass dowel nuts fit 1” hole.

168045

Set of 4 Bench Bolts & Nuts

$19.99

ROUND ALUMINUM BENCH DOGS Installs easily on any bench by drilling a 3/4” hole. Milled, sloped faces hold stock securely while a friction spring supports the dog in any top thickness. The aluminum body is easy on your honed edges.

169134 Aluminum Bench Dogs (pair, 4-3/8” long) $19.99 169135 Short Alum. Bench Dogs (pair, 2-1/4” long) $16.99 169136 Set of 4 Aluminum Dogs (2 ea., std. & short) $29.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 43

Router Bits

CHAMFER BITS

From Freud, Amana, CMT, Eagle America, Toolmasters & Whiteside.

We select the best combination of styles & pricing requiring premium quality throughout. Router bits can easily represent a greater investment than you have in your routers. We feel it makes sense to invest in bits you can rely on for precision & durability, and we offer these bits with confidence that they will meet your most exacting standards.

(Throughout these listings, “Carbide Height” is a vertical measurement regardless of edge profile.) §=Not guaranteed due to extreme length.

STRAIGHT BITS AMANA

CUTTER CARBIDE SHANK DIA. HEIGHT DIA.

ROUND NOSE BITS CMT

CUTTER CARBIDE SHANK DIA. HEIGHT DIA.

AMANA

ANGLE

CARBIDE SHANK HEIGHT DIA.

101452 45° 1/2” 1/4” 101242 45° 1/2” 1/2” 104214 45° 3/4” 1/2” 104215 11-1/4° 15/16” 1/2” 103418 15° 11/16” 1/4” 104216 22-1/2° 15/16” 1/2” 104217 30° 13/16” 1/2”

$28.99 $29.99 $86.99 $32.99 $29.99 $33.99 $31.99

102255 11-1/4° 7/8” 1/2” 102256 15° 7/8” 1/2” 102257 30° 7/8” 1/2” 101243 45° 23/32” 1/2” 102216 45° 1” 1/2” 102443 25° 1/2” 1/4”

$29.99 $29.99 $34.99 $34.99 $63.99 $27.99

CMT

DIA.

CARBIDE SHANK HEIGHT DIA.

1/2” 1/4” $17.99 101401 1/16” 1/4” 1/4” $19.99 814064 1/4” 101402 1/8” 1/4” 1/4” $13.99 101214 1/2” 1-1/4” 1/2” $31.99 1” 1-1/4” 1/2” $49.99 101403 3/16” 7/16” 1/4” $14.99 101216 102421* 15/64” 3/4” 1/4” $15.99 101404 1/4” 1” 1/4” $14.99 CORE BOX BITS CARBIDE SHANK BULLNOSE BITS 101405 5/16” 1” 1/4” $14.99 AMANA CUTTER DIA. HEIGHT DIA. BULLNOSE CARBIDE SHANK 101406 3/8” 1” 1/4” $15.99 101413 1/8” 3/8” 1/4” $21.99 AMANA DIA. HEIGHT DIA. 101407 7/16” 1” 1/4” $17.99 101414 1/4” 1/4” 1/4” $21.99 103421 1/4” 3/4” 1/4” $46.99 102422* 15/32” 3/4” 1/4” $17.99 101415 3/8” 1/4” 1/4” $23.99 103422 27/64” 3/4” 1/4” $53.99 101408 1/2” 1” 1/4” $16.99 101416 1/2” 3/8” 1/4” $24.99 104219 1/4” 3/4” 1/2” $46.99 101409 5/8” 3/4” 1/4” $17.99 101417 5/8” 7/16” 1/4” $24.99 104220 27/64” 3/4” 1/2” $56.99 102423* 23/32” 3/4” 1/4” $24.99 101418 3/4” 7/16” 1/4” $26.99 104221 1/2” 1” 1/2” $61.99 101410 3/4” 3/4” 1/4” $19.99 101419 1” 5/8” 1/4” $40.99 104222 3/4” 1-5/16” 1/2” $76.99 101265 1/4” 3/4” 1/2” $17.99 101217 1-1/4” 3/4” 1/2” $59.99 104223 1” 1-9/16” 1/2” $86.99 101266 5/16” 1” 1/2” $16.99 DELUXE ROUTER BIT STORAGE BOX 101201 3/8” 1” 1/2” $16.99 – a jewelry box for your sizable investment in router bits 101202 7/16” 1-1/4” 1/2” $18.99 Made of clear solid pine, this well constructed case features 102222* 15/32” 1-1/4” 1/2” $20.99 finger jointed corners, brass plated steel hasps, hinges & lid 101203§ 1/2” 1-1/4” 1/2” $16.99 support. Inside, a dense foam tray has 50 each 1/2” & 1/4” 101204§ 1/2” 2” 1/2” $22.99 holes spaced 1-1/8” apart. Realistically, you can expect to 104203§ 1/2” 2-1/2” 1/2” $30.99 store 50 to 70 bits up to 3-1/2” long. A soft foam lining in the 101205 5/8” 1-1/4” 1/2” $20.99 101206 11/16” 1-1/4” 1/2” $22.99 lid keeps bits secure when closed. 12-7/8” square by 4-1/8” high. Add a 102223* 23/32” 1-1/4” 1/2” $27.99 Bullfrog strip (Item 491016, page 69) for top notch rust protection.

101207 3/4” 1-1/4” 1/2” $21.99 168086 Deluxe Router Bit Storage Box $39.99 101208 7/8” 1-1/4” 1/2” $24.99 QUIRK BEAD BITS OVERHEAD-PILOT 101209 1” 1-1/4” 1/2” $25.99 BEAD CARBIDE SHANK WHITE FLUSH TRIM BITS 101210 1-1/2” 1-1/4” 1/2” $39.99 SIDE DIA. HEIGHT DIA. DIA. CARBIDE SHANK 101211 1-3/4” 1-1/4” 1/2” $49.99 102218 1/8” 9/16” 1/2” $29.99 AMANA HEIGHT DIA. BEAD CARBIDE SHANK *Sizes match plywood thickness.

101461 1/2” 1” 1/4” $24.99 AMANA HEIGHT HEIGHT DIA. 101462 3/4” 1” 1/4” $27.99 101493 1/4” 9/16” 1/4” $33.99 101463 1” 1” 3/8” $39.99 ROUND OVER BITS 101280 1/4” 9/16” 1/2” $34.99 SHANK 101284 1-1/8” 1-1/2” 1/2” $56.99 AMANA RADIUS CARBIDE HEIGHT DIA. 103423 3/8” 11/16” 1/4” $38.99 104204 3/4” 1-3/4” 1/2” $49.99 101426 1/16” 1/2” 1/4” $31.99 101281 3/8” 11/16” 1/2” $39.99 EAGLE DIA. CARBIDE SHANK HEIGHT DIA. 101427 1/8” 1/2” 1/4” $30.99 103427 1/2” 3/4” 1/4” $43.99 AMERICA 101286 3/4” 2” 1/2” $44.99 101428 3/16” 1/2” 1/4” $31.99 104231 1/2” 3/4” 1/2” $44.99 1” 1/2” $49.99 Overhead Pilot Flush Trim Bits – ideal 101429 1/4” 1/2” 1/4” $31.99 104232 3/4” 101430 5/16” 1/2” 1/4” $32.99 for template-guided shaping, pattern duplication, edge truing, etc. Max. depth 101431 3/8” 5/8” 1/4” $31.99 COVE BITS SHANK of cut is greater than the bits' cutting 101432 1/2” 3/4” 1/4” $34.99 AMANA RADIUS CARBIDE HEIGHT DIA. 101223 1/4” 1/2” 1/2” $31.99 101420 3/16” 9/16” 1/4” $34.99 length; when part of the workpiece is 101224 5/16” 1/2” 1/2” $33.99 101421 1/4” 9/16” 1/4” $34.99 trimmed, remove the template & use the 101225 3/8” 5/8” 1/2” $32.99 101422 3/8” 9/16” 1/4” $34.99 work itself as a guide.

101226 1/2” 3/4” 1/2” $35.99 101423 1/2” 3/4” 1/4” $38.99 FLUSH TRIM BITS SHANK 101227§* 3/4” 1” 1/2” $55.99 101218 3/8” 9/16” 1/2” $34.99 AMANA DIA. CARBIDE HEIGHT DIA. 101228§* 1” 1-1/4” 1/2” $104.99 101219 1/2” 3/4” 1/2” $39.99 101495 1/4” 1” 1/4” $24.99 101229§* 1-1/4” 1-1/2” 1/2” $149.99 102226 3/4” 1” 1/4” $16.99 1” 1/2” $71.99 101496 3/8” 101230§* 1-1/2” 1-7/8” 1/2” $164.99 102227§ 1” 1-1/4” 1/2” $139.99 101444 1/2” 1” 1/4” $16.99 101523 Repl. 1/2” O.D. Bearing $4.99 101522 Repl. 3/8” O.D. Bearing $4.99 101239 1/2” 1” 1/2” $17.99 102228^ 1/2” 1-1/2” 1/2” $36.99 *For use in variable-speed routers.

102229^ 1/2” 2” 1/2” $44.99 2-PIECE RAIL & STILE BITS QUADRA-CUT 101523 Repl. 1/2” O.D. Bearing $4.99 ROUND OVER BITS Paired bit assemblies complete with ^ Includes double bearing for stability.

SHANK arbors, bearings & cutters make cope & FREUD RADIUS CARBIDE HEIGHT DIA. DIA. CARBIDE SHANK CMT stick cuts without reconfiguring cutters HEIGHT DIA. 105258 5/16” 1/2” 1/2” $37.99 or calibrating set-up for perfect fit.

2” 1/2” $36.99 105259 3/8” 5/8” 1/2” $38.99 806690 3/4”

2-PIECE OGEE RAIL & STILE SET AMANA

CUTTER STOCK SHANK DIA. THICKNESS DIA.

102233 1-5/8” 7/8-1” 1/2” $109.99 105207 1-5/8” 23/32-7/8” 1/2” $129.99

2-PIECE CONCAVE RAIL & STILE SET AMANA

CUTTER STOCK SHANK DIA. THICKNESS DIA.

102234 1-5/8” 7/8-1” 1/2” $109.99 105206 1-5/8” 23/32-7/8” 1/2” $129.99

105260 1/2” 3/4” 1/2” $49.99 105262 3/4” 1” 1/2” $64.99 105264 1” 1-1/4” 1/2” $116.99 Quadra-Cut Round Over bits have 4 shear angled cutters, 2 with an upshear cut for removing most of the material & 2 with a downshear angle that provide an ultra clean final cut, free of annoying fuzz & chip outs.

See our website for more sizes & profiles of Freud’s Quadra-Cut router bits.

Our handout, "Care & Sharpening of Router Bits" is available on our website under the library tab.

ROMAN OGEE BITS AMANA

101437 101438 101235 101236 104213

CUTTING WIDTH

5/16” 1/2” 5/16” 1/2” 3/4”

CARBIDE SHANK HEIGHT DIA.

5/8” 7/8” 5/8” 7/8” 1”

1/4” 1/4” 1/2” 1/2” 1/2”

$36.99 $38.99 $38.99 $40.99 $48.99

44 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

V GROOVE BITS AMANA

ANGLE

DIA.

101411 103406 101412 101212 101213

90° 90° 90° 90° 90°

1/4” 3/8” 1/2” 5/8” 3/4”

CARBIDE SHANK HEIGHT DIA.

3/8” 7/16” 1/2” 1/2” 5/8”

1/4” 1/4” 1/4” 1/2” 1/2”

$14.99 $22.99 $25.99 $37.99 $43.99

HORIZONTAL RAISED PANEL BITS For Table-Mounted VS Routers.

OGEE AMANA

DIA.

CUTTING CARBIDE SHANK WIDTH HEIGHT DIA.

101251 2-5/8” 1-1/16” 11/16” 1/2” $79.99 104230 3-3/8” 1-7/16” 1/2” 1/2” $104.99

COVE AMANA

DIA.

CUTTING CARBIDE SHANK WIDTH HEIGHT DIA.

104229 3-3/8” 1-7/16” 1/2”

TRADITIONAL AMANA

DIA.

CMT 3-PC DOORMAKER’S SETS Boxed sets include a 3-1/2” panelraising bit for 3/4” stock and factorymatched of rail & stile sets that are for stock from 23/32” to 7/8” thick.

OGEE CLASSIC

800512 800513 800514 800516

COVE

351010 351047 351049

1/2” $104.99 1/2” $104.99

DOWN SHEAR MORTISING BITS WITH BEARING

AMANA

DIA.

OAL

CARBIDE SHANK HEIGHT DIA.

CMT GRAND RABBET BIT This is a 2” dia., 2 flute bit with 3/4” carbide height & 1/2” shank. It includes 16 bearing guides for cutting rabbets from 1/16” to 3/4” wide in 1/16” increments, plus 15/64”, 23/64”, RABBET BITS 15/32”, 19/32” & 23/32” widths DIA. CARBIDE SHANK AMANA RABBET WIDTH HEIGHT DIA. to accommodate plywood di101440 3/8” 1-1/4” 1/2” 1/4” $29.99 mensions.

103401 1/2” 2-3/8” 3/4” 1/4” $24.99 103402 5/8” 2-3/8” 3/4” 1/4” $26.99 103403 3/4” 2-7/16” 3/4” 1/4” $30.99 104205 1-1/4” 2-5/8” 1/2” 1/2” $36.99 Down shear design gives a cleaner cut.

Bearing guided for template work.

101237 101523

3/8” 1-1/4” 1/2” 1/2” $30.99 Repl. 1/2” O.D. Bearing $4.99

103218 CMT Grand

Rabbet Bit

$124.99

CMT 7-IN-1 RABBET BITS Supplied with 7 interchangeable ball bearing guides to offer rabbet widths of 1/8”, 1/4”, 5/16”, 3/8”, 7/16”, & 1/2” plus flush trimming.

Bit diameter 1-3/8”.

102426 1/4” Shank 7-in-1 Rabbet Bit $49.99 Carbide height 1/2”.

102235 1/2” Shank 7-in-1 Rabbet Bit $49.99 DISH CUTTER EAGLE AMERICA

DIA.

CORNER CARBIDE SHANK RADIUS HEIGHT DIA.

101475 3/4” 1/4” 101270 1-1/4” 1/4”

5/8” 5/8”

STOCK THICKNESS

CMT Router Bit Organizer Pack of 20 1/4” Bushings Pack of 20 1/2” Bushings

$12.99 $3.99 $3.99

SLOT CUTTERS, ARBORS & BEARING GUIDES THREE WING SLOT CUTTERS AMANA

KERF

DIA.

101501 101503 101504 101505 101506

1/16” 1/8” 5/32” 3/16” 1/4”

1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8”

101451

101241

Slot Cutter Arbor 1/4” Shank Slot Cutter Arbor 1/2” Shank

SLOT DEPTH

ARBORS from Amana

BEARING GUIDES AMANA

I.D.X O.D.

101488 101531 101532

5/16” x 7/8” 5/16” x 1-1/8” 5/16” x 1-3/8”

1/2” 1/2” 1/2” 1/2” 1/2”

SLOT DEPTH

1/2” 3/8” 1/4”

$16.99 $18.99 $18.99 $18.99 $19.99

$4.50 $4.50

$4.99 $9.99 $9.99

SPIRAL END MILL BITS IN HSS & SOLID CARBIDE These bits are indispensable for routing mortises. HSS is an economical choice when you don’t do a lot of mortising or trim work. Carbide bits hold their edges longer.

HSS SPIRAL END MILL BITS

1/4” $26.99 1/4” $31.99

for Table-Mounted VS Routers DIA.

$159.99 $159.99 $159.99 $159.99

FOAM ROUTER BIT TRAY

LOCK MITER BITS AMANA

Provincial 3-pc Set Ogee 3-pc Set Classic 3-pc Set Cove 3-Pc Set

CMT BIT ORGANIZER stores up to 100 router bits 1/2” & 1/4” insert bushings, sold in packs of 20, let you customize the layout to suit your own bit collection. Mounting holes are 1-1/8” apart on center. Sturdy plastic.

CUTTING CARBIDE SHANK WIDTH HEIGHT DIA.

104228 3-3/8” 1-7/16” 1/2”

Router Bits

PROVINCIAL

SHANK DIA.

This simple, stiff foam slab stores up to 100 bits, 50 holes each (on 1” cenDIA. STOCK SHANK EAGLE ters), for 1/2” & 1/4” (8mm THICKNESS DIA. AMERICA 101247 2-3/4” 1/2” to 1-1/4” 1/2” $109.99 shanks). 12-1/4” square x 1-1/2” thick.

One piece is run flat on the table, the other 103426 1-1/2” 5/16” to 7/16” 1/4” $79.99 104249 1-3/4” 3/8” to 5/8” 1/2” $89.99 104250 2-11/16” 1/2” to 7/8” 1/2” $129.99

TOOL MASTER

DIA.

CUTTING LENGTH

OAL

104520 1/8” 3/8” 2-1/2” 104522 3/16” 5/8” 2-7/8” 104507 1/4” 3/4” 2-7/8” 104501 1/4” 7/8” 3-1/4” 104502 5/16” 1” 3-3/8” 104503 3/8” 1” 3-1/2” $11.99 104504 1/2” 1-1/4” 4” piece is standing on edge against the fence. 168091 Foam

Router Bit Tray 104505 3/4” 1-1/4” 4” DRAWER Drawer lock bits are for use in table LOCK BITS mounted routers. Forms a strong joint SOLID CARBIDE SHANK AMANA DIA. CARBIDE HEIGHT DIA. between drawer side & front. Drawer SPIRAL UP-CUT BITS OAL 103428 3/4” 1/2” 1/4” $39.99 front runs horizontal; side runs AMANA DIA. CUTTING LENGTH 104247 1” 1/2” 1/2” $41.99 vertical against fence.

103429 1/8” 1/2” 2” CMT 2050 BLADE 103410 1/4” 3/4” 2-1/2” TONGUE & GROOVE BIT & BIT CLEANER STOCK TONGUE & SHANK 104207 5/16” 1-1/8” 3” AMANA THICKNESS GROOVE DIA. Non-toxic & non-caustic 104208 3/8” 1-1/4” 3” 101262 1/2” to 3/4” 1/4 x 3/8” 1/2” $64.99 Loosen even the hardest 104209 1/2” 1-1/4” 3” baked on encrustations Bit includes 2 cutters, ball bearing guide, on your router bits, saw spacer and shims.

SOLID CARBIDE blades & other cutting tools!

Just wipe the tool clean, WINDOW SILL leaving a thin film that pro- EDGE BITS DIA. RADIUS tects against rust & corrosion. WHITE SIDE

SHANK DIA.

1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2”

SHANK DIA.

1/4” 1/4” 1/2” 1/2” 1/2”

$8.99 $9.99 $9.99 $18.99 $18.99 $21.99 $24.99 $46.99

$22.99 $22.99 $64.99 $64.99 $66.99

SPIRAL DOWN-CUT BITS

CARBIDE SHANK HEIGHT DIA.

AMANA

103411 128275 CMT Blade & $9.99 103208 1-1/4” 7/32” 13/16” 1/2” $49.99 103412 103209 1-7/16” 3/8” 1-1/8” 1/2” $59.99 104210 Bit Cleaner (18 oz.)

128276 CMT Blade & $32.99 Not just for window sills, these bits also put an 104211 104212 Bit Cleaner (1 gal.) attractive edge on tables, doors, & drawers.

DIA.

CUTTING LENGTH

OAL

SHANK DIA.

1/8” 1/2” 2” 1/4” $22.99 1/4” 3/4” 2-1/2” 1/4” $22.99 5/16” 1-1/8” 3” 1/2” $69.99 3/8” 1-1/4” 3” 1/2” $64.99 1/2” 1-1/4” 3” 1/2” $66.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR FULL LINE OF ROUTER BITS 45

Router Accessories

KREG PRECISION BENCHTOP ROUTER TABLE This well constructed portable router table has a 16” x 24” MDF table top with rugged edge banding & impact resistant Easy-Slide™ Micro Dot skin surface. The 9-1/4” x 11-3/4” x 3/8” phenolic insert plate has no predrilled mounting holes & includes a template for custom drilling. 8 levelers ensure perfect plate flatness in the top. The 16” high top is on a beefy steel stand with vibration dampening rubber feet. 2-1/2” high splitfence adjusts within the extruded aluminum fence body. Built-in 2-1/4” dust port. 26 lbs.

124305

Kreg Benchtop Router Table

$229.99

15 Bearings QTY O.D. x I.D. 35-PIECE WHILE SUPPLIES LAST 2 3/8” x 3/16” ROUTER BIT This kit includes 2 1/2” x 3/16” SURVIVAL KIT the most common1 1/2” x 1/4” ly used bearings, 1 5/8” x 3/16” stop collars, screws 1 5/8” x 1/4” & allen wrenches.

1 3/4” x 1/4” Keep your bear1 3/4” x 3/16” 1 3/4” x 1/2” ings clean & lubed with the bearing oil 1 7/8” x 3/16” & brush, or replace blown bearings, 1 7/8” x 5/16” convert regular bits into pattern cut1 1-1/8” x 3/16” ters, vary the cutting depth of rabbets & 1 1-1/8” x 1/2” change the profile on edge forming 1 1-1/4” x 1/2” bits. Includes convenient storage case.

105194 35 Piece Router Bit Survival Kit $64.99 2 ea. 1/4” & 1/2” stop collars, 12 bearing screws (4 long, 4 short, 4 metric), 15 bearings & 3 allen wrenches for stop collars & bearing screws

UNIVERSAL-STYLE TEMPLATE GUIDE SET

This set has the template guides you'll need for most commercial jigs & shop-built templates.

These guides fit into Universal/PC style base plates with a 1-3/8” dia. opening. This 10-piece set includes 2 threaded mounting nuts & comes in a sturdy fitted plastic case.

102061 Universal-Style Template Guide Set (O.D. 5/16”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4”, 51/64” & 1”) $29.99

ROUTER BASE PLATE ADAPTER

Pre-drilled to fit Sears, DeWalt 625/621, Makita, Freud FT2000E, Ryobi, Hitachi & Elu 177 routers.

The rabbetted 1-3/8” center template guide not included opening accepts the mounting flange of P-C style universal template guides. The 3/8” clear plastic base plate allows you to safely see dovetail jig guide fingers & other templates through the base rather than putting yourself in harm’s way for a look beneath the machine (depending on your router’s base design).

105177

Router Base Plate Adapter

$21.99

ELECTRONIC SPEED CONTROL for Routers & Other Universal Motors This heavy-duty VS control is designed for DC or universal (brush-type) motors.

Used with hand-held or table-mounted routers, this unit lets you select the rpm best suited to the material, the feed rate & the bit being used. 115V, 15 amps (not compatible with soft start electronics). Electronic feedback circuitry ensures constant torque, maintaining the speed chosen regardless of load.

104901

Router Speed Control

$29.99

WHITESIDE ROUTER BIT SET Recommended by Charles Brock in his sculptured chair plans

Bits for creating the seat to leg joinery, pattern trimming and rounding chair part edges. Includes a 1/2” rabbeting bit, 3/4” round over bit, 4-3/4” long x 1/2” spiral flush trim bit, & 1-1/4” radius round over bit.

106276

Set of 4 Whiteside Router Bits $306.99 (save $29 over purchasing separately)

LARGE CIRCLE ROUTER JIG

Simple, Easy & Accurate This big jig cuts 184 circles from 7” to 52-3/4” in dia. in 1/4” steps, using a router & a 1/2” straight or spiral bit. Includes hardened steel pivot pin & selection of metric & US mounting screws. Just drill a 1/16” pivot pin hole in the center of your work, drop one of the jig’s clearly marked pivot holes over the pin, set depth of cut & swing your router thru any length or arc up to 360°.

105173 Large Circle Router Jig $52.99 for DeWalt, P-C, Makita, Ryobi, Sears, Bosch, Freud, Skil, Hitachi & Elu routers

RM3509 SOLID PHENOLIC DROP-IN BASE PLATE FOR ROUTER TABLES Our 9” x 12” (14-1/2” diagonal) 3/8” thick drop-in plate is big enough to handle any router. 4” center opening is for large raised panel bits, & 2 snap-in filler rings (2-1/2” & 1-1/4” openings) are for smaller bits. A steel starter pin controls stock as you begin a cut on curved edges.

RM3509 102049 102052 102023

Drop-In Base Plate Repl. Insert Rings Freehand Routing Guard Routing Template (for installing RM3509)

$49.99 $9.99 $13.99 $29.99

Every router table needs a power switch — it’s too dangerous & awkward to use the switch on the router itself, out of sight beneath the table.

DELUXE ROUTER TABLE SWITCH This heavy duty switch mounts easily where it’s safe & convenient. Rated for 18 amps for larger hand held power tools & 110V machines.

For safety, a removeable hinged 3-1/8” x 3-1/8” paddle style “off” switch provides a target for a knee or elbow.

7’ grounded cord. 2’ pigtail connects to your tool.

104907

Deluxe Router Table Switch

ROUTER TABLE SWITCH This lockable switched power outlet mounts at the front of your router table or other shop-made fixture. Screw tabs allow easy surface mounting. 15 amp, 110V. 5-3/4” x 2-1/2” x 3” deep. 5’ cord.

104903

Router Table Switch

$29.99

$13.99

ROUTER INLAY KIT For tight, precise inlay work with a router & templates of your own design.

Kit includes a solid brass guide bushing, retaining nut & bushing collar, and a solid carbide down-cut spiral router bit for ultra-clean milling of both workpiece & inlay material. The guide bushing fits P-C or Black & Decker router bases, & most routers with an adapter ring designed for P-C bushings.

103465 102436

Router Inlay Kit Extra 1/8” Spiral Bit

ROUTER DEPTH GAUGE

$37.99 $16.99

Measures existing setups & accurately sets depth of cut on hand held & table mounted routers.

The 3-15/16” steel rule has easy to read black filled etched graduations.

301341

Router Depth Gauge

$14.99

46 GO TO HIGHLANDWOODWORKING.COM TO SEE OUR FULL LINE OF ROUTER BITS

BRASS THREADED INSERTS These solid brass, hollow cylinders with large woodscrew threads on the outside & machine-screw threads on the inside, are a strong & reliable way to join wood for easy disassembly. Unlike Tnuts, these inserts can be used in blind-stopped holes, leaving visible surfaces unmarred.

One end has a screwdriver slot for driving the insert into a pre-drilled hole. A little wax or soap on the external threads will make installation easier.

Internal threads are standard coarse count for stove bolts, machine screws, carriage bolts & threaded rod. Test drill a pilot hole in scrap & adjust if needed. (Hardwoods may require a slightly larger hole).

THREADED INSERTS, PACK OF 10

Internal Thread Hole

175311 175312 175313 175314 175315

8-32 10-24 1/4-20 5/16-18 3/8-16

O.D.

Depth

1/4” 5/16” 3/8” $4.50 3/8” 29/64” 1/2” $5.50 3/8” 29/64” 1/2” $5.50 1/2” 19/32” 5/8” $7.50 15/32” 9/16” 15/16” $10.50

FIGURE 8 TABLE TOP FASTENERS

Joinery Tools

VERITAS POWER TENON CUTTERS These fine tools produce clean round tenons with smoothly radiused shoulders on the ends of sticks, branches, or more formal stock if you wish. With typical Veritas attention to detail, anodized aluminum bodies are accurately balanced to run smoothly in either a handheld power drill or bit brace. Blades are easily resharpened with a drum sander mounted in a drill press, using a honing guide built in to each tenon cutter. Sizes 5/8”–1” have 3/8” hex shanks & cut tenons up to 2-3/4” long. 1-1/2” & 2” sizes have 1/2” hex shanks; they cut serious tenons up to 4-1/4” long, suitable for beds, & other large-scale construction. Not for use in drill presses.

175411 175412 175414 175416 175417 175418 175419

5/8” Power Tenon Cutter 3/4” Power Tenon Cutter 1” Power Tenon Cutter 1-1/2” Power Tenon Cutter 1-3/4” Power Tenon Cutter 2” Power Tenon Cutter Tenon Cutter Repl. Blade

$89.99 $91.99 $95.99 $104.99 $106.99 $109.99 $23.99

A fast secure way to attach table tops to table aprons while allowing for seasonal movement.

Fasteners are 1/8” thick & 1-5/16” long with 3/4” & 5/8” wide ends. Screws not included.

Use a 3/4” Forstner bit to mortise 1/8” into the top of the apron. Secure the large end of the fastener into this mortise with a #8 x 1” screw (the other half will hang over the inside edge of the apron.) Drive another screw through this end of the fastener into the table top from unFLUTED DOWELS derneath. The oversize hole in the fastener allows movement.

Short lengths of hardwood dowels are ribbed to 188119 Figure 8 Fasteners (12 pk) $4.59 give good glue surface for strong dowel joints.

BAG OF 50 BISCUITS

SIZE SPLINE WIDTH LENGTH OF CUT

179025 179026 179027

0 10 20

9/16” 2-1/8” 3/4” 2-3/8” 15/16” 2-9/16” BOX OF 1000 BISCUITS 0 9/16” 2-1/8” 10 3/4” 2-3/8” 20 15/16” 2-9/16” Assortment of 3 sizes

179002 179003 179004 179098

T-NUT FASTENERS These useful fittings provide steel threads in wood for anchoring stove bolts without a nut & washer. Drill holes to fit barrel of the T-nut and tap in. Insert screw from the opposite side & tighten.

$4.50 $4.50 $4.50 $36.99 $36.99 $36.99 $36.99

Box of 100 T-nuts Size 175022 6-32 $9.99 175023 8-32 $9.99 175024 10-24 $9.99 175028 10-32 $9.99 175025 1/4”-20 $9.99 175026 5/16”-18 $16.99 175027 3/8”-16 $16.99

STEEL BED RAIL FASTENERS This hardware allows a bed’s side rails to securely hook into the headboard & footboard. The only assembly tool needed is a rubber mallet. Make shallow mortises to install the hardware. Use #8 flat head screws (not included - see screws on page 53).

188116

5” Bed Rail Fasteners Set of 4 (5/8” wide x 1/8” thick x 5” long)

$11.99

FLUTED DOWELS - PACKS OF 100 EACH 475601 1/4” $4.99 475603 3/8” $4.99 475602 5/16” $4.99 475604 1/2” $6.50

A SELF-CENTERING DOWELING JIG Automatically centers 5 sizes of holes on the edge of any board 1/2” - 2” thick. 1/4”, 5/16”, 3/8”, 7/16” & 1/2”. Uses standard-length twist or bradpoint bits.

477501

Self-Centering Jig

A

$46.99

B

B DOWL-IT 2500 This self-centering jig has 4 threaded guide holes to accept screw-in drill bushings, so multiple sideby-side holes can be drilled without moving the jig.

Holes can be spaced at 3/4”, 1-1/4”, 2” or 2-3/4” on center. Includes 2 each 1/4”, 5/16” & 3/8” bushings.

477507 477504 477505 477506

Dowl-It 2500 Jig Replacement 1/4” Bushing Replacement 5/16” Bushing Replacement 3/8” Bushing

$59.99 $6.99 $6.99 $6.99

REPLACEMENT CHISEL & BIT SETS for HOLLOW CHISEL MORTISERS (5/8” shank)

150812 1/4” $23.99 150813 5/16” $23.99 150814 3/8” $23.99 150815 1/2” $24.99 150816 Set of 4 Chisel & Bit Sets

MULTI-ROUTER JOINERY MACHINE $89.99 This is the ultimate joinery production machine (as seen on the DIY Network show Wood Works with David Marks). It excels at creating standard & compound tenons, mortises, as well as box joints, dovetails, sliding dovetails & round tenons (templates sold separately). CNC manufactured to exacting tolerances, its’ sliding table glides on solid steel ways & linear ball bearings. Mount your 2HP router on the vertical platen & you’ll be cutting joints faster & more accurately than ever before. To find out more about this amazing tool call us or go to highlandwoodworking.com.

Truck shipping charges apply. Contact us for a truck shipping quote.

485201 Multi-Router Joinery Machine $2699.00

GO TO OUR WEBSITE TO SEE THE MULTI-ROUTER PRODUCTION JOINERY MACHINE 47

LEIGH Joinery Systems LEIGH D4R PRO 24" DOVETAIL JIG D4R PRO includes: Cuts 5 sizes of “single pass” half-blind dovetails as well as • 1/2”, 8° dovetail bit • 1/2”, 14° dovetail bit 3/8” & 3/4” box joints!

• 5/16” straight bit • 1/2” to 8mm collet reducer • e7 template guide • Sliding dovetail fence • Half-blind bridge stock • Box joint & single pass spacers • Nylon stop rod • User guide & DVD

The Flagship D4R Pro, Leigh’s largest capacity dovetail jig, handles 1-1/2” thick stock for half-blinds & 1-1/4” thick stock for through dovetails. Its’ 1 piece aluminum extruded body with non-marring grip texture has machined side stops for positive stock alignment. The D4R Pro accepts all optional Leigh templates & jigs, & is the most versatile & expandable dovetail jig Leigh offers.

The Leigh jig allows you to vary the spacing of both pins & tails on stock up to 24” wide so you can design a piece of furniture & then fit the jig to the design, rather than being constrained to the limited number of stock widths that suit conventional fixed templates. The actual cutting of perfectly fitted dovetails quickly becomes routine, freeing you to focus on designing creative, aesthetically appealing layouts.

105715 Leigh D4R Pro with Accessory Kit $749.99 (D4R Pro, Highland 12-Piece Dovetail Bit Set & VRS) 105304 Leigh D4R Pro 24 Dovetail Jig $549.99 105706 Leigh D4R Pro 24 Accessory Kit $249.99

(Highland 12-Piece Dovetail Bit Set & VRS)

NOTE The e guide bushing is supplied with all Leigh dovetail jigs. It is a 2-pc “universal style” mount.

Leigh makes adaptors for many routers that accept universal style guides.

A comprehensive list of router adaptors is on our website.

Click the LIBRARY tab & scroll down to ROUTERS for the template guide selection chart. Or call us at 800-241-6748.

LEIGH R9PLUS JOINERY SYSTEM Leigh’s long history of innovation & exceptional quality continues!

Using a precision CNC machined template partnered with new template positioning technology, the R9Plus will let you quickly route accurate through dovetails & box joints on boards of any width. Thanks to the Leigh e10 guide bush, your joints are guaranteed a perfect fit, with precise repeatability.

With the R9Plus (& optional bits) you can make 3 sizes of through dovetails, (pin widths 3/8”, 7/16” & 1/2”), in stock up to 13/16” thick and 3/16”, 3/8” & 3/4” box joints in stock up to 1” thick. The template is mounted on a backing beam you make yourself, as well as a replaceable backer board, that eliminates tear out. The R9Plus template, (5” x 14”), is designed to be used with a stand alone router (bench mode) or on your router table.

VRS - VACUUM & ROUTER SUPPORT for Leigh Jigs Leigh’s Vacuum & Router Support adds dust connectivity to your jig, while providing additional router support across the full width of the jig.

Each VRS comes with 2 adaptors to fit 1” to 2-1/2” vacuum hoses. The VRS is secured by powerful rare

LEIGH SUPER JIGS

SHOWN WITH OPTIONAL VRS.

These Leigh dovetail jigs come in 12”, 18” & 24” models & have all the great features you’ve come to expect from Leigh but at a lower price!

The Super Jigs come equipped to cut 5/16” & 5/8” box joints, sliding dovetails & single pass halfblind dovetails. There’s no additional template to buy. You can even fine-tune the fit of the fingers with Leigh’s E-Bush template guide that adjusts in increments of .002”. Max. board thickness is 1” for half-blinds & 13/16” for through dovetails.

THROUGH HALF-BLIND SLIDING PRODUCTION BOX DOVETAILS DOVETAILS DOVETAILS WORK JOINTS

With each size Super Jig you get: 1/2” 8° dovetail bit, 1/2” 14° dovetail bit, 5/16” straight bit, 1/2” to 8mm collet reducer, e7 template guide, cam-action speed clamps, sliding dovetail fence, square drive screwdriver (for adjusting the fingers), a really firstclass instruction manual & DVD & some half-blind bridging material.

105723 105724 105725 105717

105718

105720

Leigh Super 12” Jig $259.99 Leigh Super 18” Jig $369.99 Leigh Super 24” Jig $459.99 Leigh Super 12” Jig with Acc. Kit $409.99 (kit includes VRS & Highland 7-piece bit set) Leigh Super 18” Jig with Acc. Kit $519.99 (kit includes VRS & Highland 7-piece bit set) Leigh Super 24” Jig with Acc. Kit $599.99 (kit includes VRS & Highland 7-piece bit set)

The R9PLUS Joinery System Includes: • R9 Template (machined & anodized aircraft grade aluminum) • 3 Pin Plates & Template Positioning Hardware • 2 F Style Clamps with Anti-rotation Locators • Adjustable Side Stop for all Joint Types • All Hardware for Beam Assembly (wood not provided) • No. 80-8 1/2” 8° Dovetail Bit with 8mm Shank* • No. 160 1/2” Straight Bit with 1/2” Shank* (* included bits make 1/2” dovetails in 3/4” stock) • No. 172-8 Collet Reducer 1/2”- 8mm • e10 Elliptical Guidebush for Joint Fit Adjustment (standard mount) • Illustrated User Guide

A terrific value for woodworkers on a budget who need to cut dovetails & box joints with speed, precision & Leigh Jig reliability!

105821 Leigh R9PLUS Joinery System $175.99 105822 Leigh R9PLUS Accessory Kit $89.99 (3/8” & 7/16” dovetail bits, 5/16” straight bit, e7 guide bush for half-pitch dovetails, 3/16” & 3/8” spiral upcut bits for box joints & a 1/2” to 3/8” collet reducer)

earth magnets, so it stays put during use, but allows quick, tool-free template changes. Aluminum and tough ABS plastic.

105730 105727 105726 105728 105729 105714 105716 105731 105719

Leigh VRS for D4R Jigs Leigh VRS for D1600 Jig Leigh VRS for Super 12” Jig Leigh VRS for Super 18” Jig Leigh VRS for Super 24” Jig Leigh D4R Jig with VRS Leigh Super 12” Jig with VRS Leigh Super 18” Jig with VRS Leigh Super 24” Jig with VRS

$99.99 $89.99 $79.99 $89.99 $89.99 $619.99 $325.99 $429.99 $519.99

48 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

LEIGH FMT PRO & SUPER FMT JIGS Frame & Mortise Tenon Jigs turn your 1/2” plunge router into a mortise & tenon factory!

With Leigh’s FMT Jigs, setup & operation for making mortise & tenons is easy: Mount your router on the included sub base, install a bit & joint guide, clamp in your stock & start routing. A single bit cuts both the mortise & tenon. Joint fit is easily adjusted with a micro adjuster. With all the optional joint guides & bits available, over 70 sizes of mortise & tenons are possible from 1/16” x 1/8” to 1/2” x 5”. You can make left & right angled joints up to 45° & tilt the jig’s clamp plate up to 30° for making compound angles.

The FMT Pro Jig is made from anodized, CNC milled aluminum extrusions, has cam-action speed clamps, an integrated & retractable line up sight & built-in connectors FMT Pro for dust collection. router not included The Super FMT Jig is made from less costly powder coated CNC punched steel plate, has standard style bar clamps, a snap in line up sight & offers an 8 BIT ACCESSORY KITS optional vacuum for FMT Pro & Super FMT Jigs Super FMT These boxed sets include box connector for dust collection.

8 sizes of spiral up-cut bits Both jigs handle stock up to 3” x 5”, accept all the (either HSS or solid carbide optional guides & come with five 5/16” Joint Guides 1/16”–1/2” in 1/16ths) & the joint guides sets & a 5/16” HSS up-cut spiral end mill bit, so you can for 1/4”, 3/8” & 1/2” standard mortise & tenons. cut 5/16” mortises & tenons in lengths of 1/2”, 3/4”, 105396 FMT HSS Accessory Kit $239.99 1”, 1-1/4” or 1-1/2”.

105390 Leigh FMT Pro Jig $999.99 105397 FMT Pro Jig with HSS Acc. Kit $1139.99 105721 FMT Pro Jig with Carbide Acc. Kit $1249.99 105757 Leigh Super FMT Jig $499.99 105762 Super FMT Jig with HSS Acc. Kit $649.99 105763 Super FMT Jig with Carbide Acc. Kit $699.99 105758 Vacuum Box for Super FMT $49.99 Joint Guide Sets fit both FMT Pro & Super FMT Jigs 105391 8-Pc. 1/4” Joint Guide Set $69.99 (mortise lengths from 5/16” to 1-1/2”) 105393 4-Pc. 3/8” Joint Guide Set (1” - 2-1/2”) $39.99 105394 4-Pc. 1/2” Joint Guide Set (1” - 2-1/2”) $39.99 105395 Set of All 3 Guide Set Sizes $119.99

SQUARE CORNER TEMPLATE GUIDES for FMT Pro & Super FMT Jigs These guides allow you to route square cornered tenons to match any mortise length up to 5”. All square tenons are routed with a 1/2” router bit.

105477 105478 105479 105484 105485

1/4” FMT Square Tenon Guide 5/16” FMT Square Tenon Guide 3/8” FMT Square Tenon Guide 1/2” FMT Square Tenon Guide Set of 4 FMT Square Tenon Guides

$28.99 $28.99 $28.99 $28.99 $89.99

HIGHLAND BITS FOR LEIGH JIGS These bits are identical to those sold by Leigh.

Size

Angle

1/4” 1/2” 8mm Leigh Shank Shank Shank No. 1/4” 8° 105332 105305*† 50 $14.99 5/16” 8° 105333 105306*† 60 $14.99 3/8” 8° 105311 105307*† 70 $14.99 7/16” 8° 105334 105308*† 75 $14.99 1/2” 8° 105312 105309 80 $14.99 1/2” 10° 105335 105321*† 101 $14.99 1/2” 12° 105337 105338*† 112 $14.99 1/2” 14° 105317 105322 120 $14.99 1/2” 18° 105336 105323*† 128 $14.99 11/16” 8° 105313* 90 $19.99 13/16” 8° 105314* 100 $19.99 5/16” Straight 105331 105325 140 $14.99 7/16” Straight 105320* 150 $14.99 1/2” Straight 105330* 160 $14.99

105707

FMT Carbide Accessory Kit

$349.99

SUPER FMT ACCESSORY KITS Accessory kits include 1/4”, 3/8” & 1/2” bits (choose HSS or solid carbide), 16 joint guides (eight 1/4”, four 3/8” & four 1/2”), & a vacuum hose box with 2 hose adapters for connecting your shop vac.

105760 105761

Super FMT HSS Accessory Kit $199.99 Super FMT Carbide Accessory Kit $269.99

105487

Y-Axis Mortise Guide for FMT

$35.99

105486

FMT Louver Door Guides

$59.99

Y-AXIS MORTISE GUIDE for FMT Pro & Super FMT Jigs Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90º to the clamp plate. The Y-Axis mortise guide can produce 6 sizes of mortises: 1/4” x 3/8”, 1/4” x 1/2”, 1/4” x 3/4”, 5/16” x 1/2”, 5/16” x 3/4” & 1/2” x 1”. Additional size mortises can be created using table limit stops & different bit sizes.

LOUVER DOOR GUIDES for FMT Pro & Super FMT Jigs Use your FMT to make precise louver doors with standard 1/4” x 1-1/4” louvers at a 45º angle.

HIGHLAND BOXED 7-PIECE DOVETAIL BIT SET FOR SUPER JIGS Carbide-tipped (8mm shank) bits listed with † at left.

105465 7-pc Dovetail Bit Set $99.99

HIGHLAND BOXED 12-PIECE 8MM SHANK DOVETAIL BIT SET FOR D4R JIGS (for 1/2” collets) This 12-piece carbidetipped (8mm shank) set includes a 1/2” to 8mm collet reducer & the bits at left with *.

105301

12-pc. 8mm Shank Dovetail Bit Set $134.99

8MM COLLETS & ADAPTOR SLEEVES 101623

44008 101625 101028

8mm Collet for Bosch 1613, $16.99 1617EVS & 1618EVS 8mm Collet for P-C 690, 691 &693 $31.99 8mm x 1/2” Collet Sleeve $8.99 1/4” x 1/2” Collet Sleeve $8.99

LEIGH FINGER JOINT TEMPLATE These sophisticated guide finger assemblies cut perfectly fitted finger joints.

105815 105709 105710

F3 Finger Joint Template for D4R Jigs Finger Joint Template for Super 18” Jig Finger Joint Template for Super 24” Jig

$199.99 $189.99 $199.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 49

Kreg Pocket Hole Jigs

A Kreg Pocket Hole Jig allows you to create strong joints quickly & easily using only a drill/driver & screws. Screws add great strength & serve as clamps while the glue dries. has a dust port & an ad-

Kreg’s new Micro Pocket Drill Guide creates a pocket-hole that is 25% smaller than the standard pocket hole. The includ- MICRO ed stepped drill bit is 19/64” in dia. & JIG allows you to use a shorter 3/4” Pan Head screw that remains below the finished surface. Great for joining thinner material, like 1/2” thick drawer sides. Use a clamp to secure the guide to your work, or if you own a Kreg Pocket Hole Jig, the Micro drill guide fits perfectly into its’ base. Includes drill bit, stop collar & hex wrench.

The Junior Jig is Kreg’s entry level jig. It is easily adjusted to reference the jig for 9 different stock thickness from 1/2” to 1-1/2”. A simple squeeze on the guide positioning sliders (no tools required) lengthens or shortJUNIOR ens the jig. For drilling, clamp JIG the jig with your own clamp or use the quick-connect clamp adapter to capture the pad of Kreg’s face clamp (sold separately).

The Junior Jig Kit includes the R3 Jig, step drill bit, 6” driver bit, depth collar with Allen wrench, clamp adapter & sample screws & plugs, all in a plastic storage case.

Kreg’s D.I.Y. Pocket Hole Jig Kit comes with a heavy duty glass reinforced plastic drilling jig with 3 steel guides. This drill guide jig inserts into the included D.I.Y. benchtop base & quickJIG ly adjusts incrementally KIT for drilling in 1/2” – 1-1/2” thick material. A toggle style clamp securely holds your stock to the jig. The drilling guide can be removed from the base for drilling in hard to reach jobs.

The D.I.Y. Jig includes step drill bit & collar, 6” driver bit, assortment of screws & sample plugs, dust collection port, instructional DVD & sturdy plastic case.

The most versatile model we carry is the Kreg Jig Master System. It’s a heavy duty glass reinforced plastic jig with 3 steel drill guides. The Drill Guide Block fits in either a Portable or a Benchtop base. The Benchtop Base is adjustable in 1/8” increments to center the pocket holes in stock 1/2” to 1-1/2” thick &

KREG POCKET HOLE SCREWS

justable stop. Toggle style clamp handle quickly & securely holds your stock in the bench top base.

K4 The Master System MASTER SYSTEM includes step drill bit & stop collar, 3” face clamp, 3” & 6” drivers, material support stop, Mini jig, starter screw set, starter plug set, SkillBuilder DVD & a carrying case.

Kreg’s Mini Jig is perfect for site work repairs, adding shelving to existing work or where space is limited. It includes a single hole jig, bit & stop collar.

The HD Drill Guide Jig makes pocket holes 25% larger to accept #14 screws for joining stock 1-1/2” thick & larger. Use it as a stand- HD JIG alone jig or in the K3 or K4 Kreg jig bases.

Includes HD drill guide, drill bit, driver bit, stop block, stop collar, allen wrench, & screws.

Kreg’s Right Angle Clamp aligns panels at 90° for casework & holds face frames to carcasses while driving screws. An improved Face Clamp design has swivel pads, cushioned grips & 3 reach capacities. Sizes reflect the reach length when clamping 1” thick stock.

124071 124030 124054 124087 475270 185480 124038 124035 124036 124037 124072 475256 475268 475257 124033 124034 124032 185483 185484 200158 200160 200159 200163 200161

Kreg Micro Pocket Drill Guide $44.99 Kreg Jig Jr. $44.99 Kreg D.I.Y. Jig Kit $99.99 Kreg Jig Master System -K4 $139.99 Mini Kreg Jig Kit $24.99 Kreg HD (Heavy Duty) Jig $59.99 Kreg Right Angle Clamp $28.99 Kreg 3” Face Clamp $22.99 Kreg 6” Face Clamp $31.99 Kreg 10” Face Clamp $41.99 Repl. Drill Bit (Micro Pocket Drill Guide) $16.99 Kreg Replacement Drill Bit $19.99 Kreg 3” & 6” Square Driver Bits $4.99 Kreg Drill Bit Stop Collar $2.50 Quick Change Pocket Hole Drill Bit $17.99 Quick Change Adapter $7.99 Quick Change Pocket Hole Kit $29.99 2-1/2” HD Screws, 30 ct $4.49 2-1/2” HD Screws, 125 ct $19.99 Kreg Pocket Holes for Cabinets DVD $9.99 Kreg Pocket Holes for Tables DVD $9.99 Kreg Pocket Holes for Router Tables DVD $9.99 Pocket Holes for Home Improve. DVD $9.99 Kreg 15 Project Plans CD $19.99

Kreg’s pocket hole screws are case-hardened, self-tapping & feature a #2 square drive recess to reduce cam- POCKET HOLE out as you drive the screw & a built in washer to seat the screw head securely. Select Fine threads for hard- WOOD PLUGS woods. Use Coarse threads for softwood, plywood & MDF. Use Pan Head * to ensure below flush driving.

Qty 50 $6.99 KREG SCREWS Screws for interior applications are coated 475451 Oak KREG MICRO POCKET 475452 Maple INTERIOR FINE THREAD with a dri-lube finish for easy driving.

475453 Walnut Size Qty 100 Qty 500 Qty 1000 STAINLESS STEEL SCREWS KREG STAINLESS 475454 Cherry $4.19 $16.99 $26.99 Size Qty 100 Qty 1000 STEEL SCREWS 3/4” 124074 124075 124076 For maritime applications, 475456 Pine $19.99 $129.99 * Qty 50 $4.99 1-1/4” Fine 185443 185444 coastal construction & ACQ INTERIOR FINE THREAD 185410 Paint Grade treated lumber.

Size Qty 100 Qty 500 Qty 1000 1-1/4” Coarse 185434 185435 $4.99 $17.99 $26.99 1-1/2” Coarse 185437 185438 KREG BLUE-KOTE Weather Resistant Screws Qty 50 Qty 250 3 chemically combined anti-corrosion layers 1” * 475351 475361 475371 Size $25.99 $99.99 make these rust resistance screws the best choice 1-1/4” 475352 475362 475372 1-1/2” 475353 475363 475373 2-1/2” Coarse 185440 185441 for most exterior pocket-screw construction.

INTERIOR COARSE THREAD BLUE-KOTE SCREWS KREG POCKET HOLE SCREW KIT Size Qty 100 Qty 500 Qty 1000 Qty 50 Qty 100 Qty 250 Qty 1000 Kit has 150 each of 1” & 1-1/4” Fine, $4.99 $17.99 $26.99 Size $4.99 $6.49 $17.99 $37.99 1” & 1-1/4” Coarse, and 75 of 2-1/2” 1” 475354 475364 475374 1-1/4” 185422 185423 Coarse Blue-Kote screws, all in a clear 1-1/4” 475355 475365 475375 1-1/2” 185425 185426 plastic case.

1-1/2” 475356 475366 475376 2” 185428 185429 185453 Kreg Pocket Hole $29.99 Size Qty 50 Qty 250 2-1/2” 185431 185432

Screw Kit $3.99 $15.99 2” 185404 185414 Material Thickness 1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” Screw lengths join same 2-1/2” 475358 475378 Screw Length 1” 1” 1-1/4” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2-1/2” thickness stock

50 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

KREG PRECISION BEADED FACE-FRAME SYSTEM

INCLUDES: • Integrated Clamp • Heavy Duty Aluminum Fence • Zero Clearance Ball Bearing Sliding Base • 1/4” Precision Router Table Set-Up Bar • 1/2” Dowel Pin • Precision Router Table Stop • Integrated Tape Measure • 1/4” Standard Beading Bit • Instructional DVD • 1/4” x 1-1/2” Notching Bit Working with a router mounted on your router table, this system is the fastest, easiest & most affordable way to build traditional & elegant beaded face-frames in a home shop.

This system includes what you need to precisely miter notch the rails & stiles and create a perfect 1/4” bead. Then assemble the frame quickly & easily using Kreg Pocket Joinery. Integrated beaded frames will give your cabinets a professional tailored look, without all the hassles of mitering & gluing on applied beads.

124314 Kreg Beaded Face-Frame System

$379.99

KREG SHELF PIN JIGS This 7-1/2” shelf pin drilling jig has 6 permanent steel bushing guides spaced 32mm (1-1/4”) on centers, & a locator pin to precisely align the next set of holes adjacent to the first. A self-squaring fence lets you adjust the guide for either 1” or 2” (approx.) from your reference edge, & is removable to freely position the jig where needed. The drill bit with depth stop collar & indexing pin store conveniently on the jig. A jig extender lets you connect multiple jigs to each other. Jig works with both sizes of bits.

Assembly Tools

VAUGHAN RAWHIDE MALLETS The original old timer’s “non-marring mallets” before petro-chemical composite plastics emerged.

Tightly compressed, rolled, seasoned rawhide make up the head. Mounted on a hardwood handle. Size indicates face diameter. Keep away from your dog!

129504 4 oz. Rawhide Mallet (1-1/4”, 11” OAL) $16.99 129505 12 oz. Rawhide Mallet (1-7/8”, 13-1/2” OAL) $28.99 129506 24 oz. Rawhide Mallet (2-3/4”, 16-1/4” OAL) $49.99

WOODEN SHOP MALLET This excellent general purpose mallet has a 10” beech handle & a 2-1/4” dia. by 4-3/4” long ash head.

146072

Wooden Shop Mallet (0.6 lbs.) $9.99

DEADBLOW MALLETS

Hundreds of metal shot inside the head give maximum striking force without rebound.

Durable, non-marring polypropylene head & handle.

146084 146085 146086

6 oz. Deadblow Mallet 12 oz. Deadblow Mallet 22 oz. Deadblow Mallet

$8.99 $14.99 $17.99

WARRINGTON HAMMERS These unique hammers from Footprint, also known as a “cross pein hammer” are well balanced, with a flat peen on one side being ideal for seating narrow pins & other delicate joinery. Hickory wood handle.

124096 124104 124097 124098

Kreg Shelf Pin Jig w/ 1/4” Bit Kreg Shelf Pin Jig w/ 5mm Bit Repl. 1/4” Shelf Pin Drill Bit Repl. 5mm Shelf Pin Drill Bit

$34.99 $34.99 $7.99 $7.99

173821 173822 173823 173824

4oz. Warrington Hammer (12-1/2” OAL) $21.99 8oz. Warrington Hammer (10-1/2” OAL) $19.99 12oz. Warrington Hammer (11-1/2” OAL) $22.99 16 oz. Warrington Hammer (12-/12” OAL) $24.99

104941

2 Position 1/4” Shelf Pin Drill Guide

$32.99

489018 5mm Self-Centering Shelf Pin Drill Bit

SHELF PIN DRILL GUIDES Drill shelf pin holes that are perfectly 1-1/4” on center This 19” see-through acrylic template comes with a 1/4” self-centering drill bit to drill holes for 1/4” shelf pins. A two position edge strip allows you to locate holes at either 2-1/2” or 1-15/32” from the cabinet’s edge. Indexing holes keep you aligned for drilling along any length board. A 5mm self-centering bit is available separately for making holes for 5mm shelf pins. made in USA

476802 476803 476804 476805 476806 476807

FULLER PLUG CUTTERS Produce cleanly cut plugs with a chamfered end.

476801 Set of 3 (3/8'', 1/2'', & 5/8") 1/4” Fuller Plug Cutter (1/4” shank) 3/8” Fuller Plug Cutter (1/4” shank) 1/2” Fuller Plug Cutter (1/4” shank) 5/8” Fuller Plug Cutter (1/4” shank) 3/4” Fuller Plug Cutter (1/2” shank) 1” Fuller Plug Cutter (1/2” shank)

$44.99 $10.99 $13.99 $16.99 $19.99 $25.99 $35.99

SCREW GRIPPER PLIERS These 6” pliers securely grab & remove damaged screws from 1/8” to 9/16” dia.

The small, long nose fits into tight spots without compromising grip or damaging surfaces. Wonderful machining has carefully ground surfaces, accurately mated jaws & keenly cut teeth on jaw & nose.

146607

Screw Gripper Pliers

$29.99

167208 167209

J Roller High Leverage J Roller

$13.99 $16.99

172110

Brad Driver

$18.99

High leverage roller is for 2-handed use

J ROLLERS 3” wide hard rubber rollers for void-free laminating & veneering apply even pressure without shifting stock. (Veneer glues on page 70.)

BRAD DRIVER Use it to install finishing nails up to 1” long. Insert the nail into a barrel which retracts as the nail is installed by palm pressure on the handle.

$23.99

FULLER TAPERED PLUG CUTTERS

For cleanly cut tapered plugs with chamfered ends.

The angle of taper helps the plug fit tightly into a countersunk hole that may not be perfectly sized. A 1/4” hex shank ensures that your drill press chuck will hold the shank securely.

175626 175627 175628 175629

1/4” Tapered Plug Cutter Hex Shank 3/8” Tapered Plug Cutter Hex Shank 1/2” Tapered Plug Cutter Hex Shank 5/8” Tapered Plug Cutter Hex Shank

TAPERED PLUG Sides are smooth since they’re shaved to size while being cut.

$13.99 $15.99 $15.99 $19.99

REGULAR PLUG Sides are rough because of fiber tearing.

Sides are rough Sides are smooth Sides are rough Sides are smooth VERITAS “SNUG PLUG” Tapered Plug Cutters since they're shaved because of fibre since they're shaved because of fibre to size while being cut. tearing. to size while beingwell-made cut. tearing.

These plug cutters create smoothly tapered plugs to ensure a tight, accurate fit in screw countersinks, even if the countersink isn’t perfect.

TAPERED PLUG

477011 477012 477015 477013 477016 477014

REGULAR PLUG TAPERED PLUG

REGULAR PLUG

Set of 3 (1/4”, 3/8”, 1/2”) $49.99 1/4” Snug Plug Cutter $18.99 5/16” Snug Plug Cutter $19.99 3/8” Snug Plug Cutter $19.99 7/16” Snug Plug Cutter $20.99 1/2” Snug Plug Cutter $20.99

GENERAL ADJUSTABLE PIN VISE

For holding small drill bits, files, rotary burrs & small tools.

This vise has a 4” x 1-1/8” dia. ribbed handle you can actually get some purchase on. A keyless, 3-jawed drill-style chuck with knurled-grip opens from 0 to 1/4” (grips most Foredom & Dremel acc.). 5-3/4 OAL. 123022

General Adjustable Pin Vise

$14.99

GO TO OUR WEBSITE TO SEE THE MULTI-ROUTER PRODUCTION JOINERY MACHINE 51

Drilling Tools & Bits

KURI-KURI MINI DRILL This nifty miniature bit brace has a bright chrome body and a Japanese red oak knob.

Includes single-spiral bits with lead screw & side scorers which cut clean holes in 3, 4, 5, 6 & 8mm dias. A 3mm gimlet bit makes pilot holes for small screws, & a 6mm conical bit works in most plastics. The Kuri-Kuri accepts any 1/4" hex bit with a detent end, so you can use it with other sized bits or even as a speed screwdriver.

168301

Kuri-Kuri Drill (approx. 9” x 3”) $69.99

LIE-NIELSEN HAND COUNTERSINK This elegant hand countersink has a curly maple handle with brass ferrule. It measures 5” long and has an 82° 3-flute head.

134071

Lie-Nielsen Hand Countersink

$35.00

SCHROEDER BREAST DRILL This excellent quality heavy-duty eggbeaterstyle tool has a contoured steel top plate you lean against for added force, keeping both hands free for control. A box encloses the cut-steel gears to protect clothing & fingers. The spring-loaded chuck has 3 hardened jaws that open just over 1/2”.

Made in Germany Switching the crank handle from one side of the tool to the other changes the speed from ~ 5 to 2 revolutions per turn for added torque.

471805

Schroeder Breast Drill (OAL 14”)

THE CONVENIENCE, ACCURACY & REPEATABILITY OF A DRILL PRESS WHEREVER YOUR DRILL CAN GO.

An adjustable depth stop permits production drilling for repetitive jobs; return springs keep the drill up & out of the way between jobs. V-notches in the base hold dowels for accurate center drilling. Guide rods set for perpendicular or angled drilling. Max. drill depth ~ 6”. Accommodates motor housings up to 3-1/2” wide.

Portable Drill Guide

169111 169112 169114 169116

$29.99

Set of 6 Quick Bore Drill Bits 3/8” $6.99 169113 1/2” 5/8” $6.99 169115 3/4” 7/8” $8.99 169117 1”

$34.99 $6.99 $6.99 $9.99

25 PIECE TIN COATED BRAD POINT BIT SET WITH INDEX Set of 25 bits from 1/8” to 1/2” in 64th’s.

Titanium Nitride Coating provides extra durability & edge retention. 7 x 6 x 1-1/2” metal index case w/hinged lid.

312159 25 Pc Brad Point Bit Set $26.99

SCHROEDER HAND DRILLS

Nicely made eggbeater-style hand drills have a single pinion drive that spins the three-jawed chuck 4 revolutions per turn.

The 11-3/4” OAL drill has 5/16” chuck capacity. The small drill, perfect for young woodworkers, has 1/4” capacity & is 9-1/4” OAL. 471817 Schroeder Hand Drill 471818 Small Schroeder Hand Drill

$99.99

PORTABLE DRILL GUIDE with 3/8” chuck

475012

QUICK BORE DRILL BITS Based on Stanley’s discontinued Powerbore drill bits, these bits cut fast & leave a nice clean hole.

The edge rim spur slices the wood on the circumference of the hole, while the radial lip cutting edge (like found on Forstner bits) lifts the chips out of the hole. A long center point helps stay on center as the hole is started & allows drilling at slight angles off perpendicular. 5-1/4” long with 1/4” hex shank.

Set comes in a padded aluminum case.

$39.99 $26.99

16 PIECE STEELEX FORSTNER BIT SET This Forstner bit set has a wooden case with a lid that folds under the box while the bit storage racks tilt up for ease of access. Includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” & 2-1/8” resharpenable bits. Made from high carbon steel.

173573

CMT FORSTNER BIT SETS These European made 3-9/16” long bits drill clean flat-bottomed holes in all woods. Shank dia.

3/8”. Sets come in sturdy padded plastic cases.

Set of 16 Steelex Forstner Bits

$59.99

FULLER QUICK CHANGE TAPER DRILL BITS Fuller’s high quality taper drill bits now come with hex-ended shanks

MADE IN USA

$8.99 107912 1-5/8” $14.50 107901 1/4” $4.99 107907 1” This set includes a 107902 3/8” $5.50 107908 1-1/8” $10.50 107913 1-3/4” $15.99 quick change chuck 107903 1/2” $6.50 107909 1-1/4” $10.99 107914 1-7/8” $16.99 that pulls back easily 107904 5/8” $6.50 107910 1-3/8” $12.50 107915 2” $17.99 to release the bit, taper 107905 3/4” $6.99 107911 1-1/2” $13.99 107916 2-1/8” $18.99 drills with countersinks for #5, #6, #7, #8 107906 7/8” $7.50 & #9 wood screws, a stop collar, a 3/8” tapered 107917 Set of 7 Bits (1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”) $42.99 plug cutter for making your own plugs, 2 Allen 107918 Set of 16 Bits (1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, $129.99 wrenches & a routed wooden box.

1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2”, 2-1/8”) 175609 Fuller Hex Shank $95.99 310320 6” Forstner Bit Extension for bits 13/16” & larger $14.99 Taper Drill Bit Set 107933 35mm CMT Forstner Bit $13.50

ADJUSTABLE DRILL STOP COLLARS

For repeat drilling to a FULLER TAPER DRILL COUNTERSINKS (stop collars not included) predetermined depth.

Screw 5 6 7 8 9 10 12 14 Size 175601 175602 175603 175604 175605 175606 175607 175608 477401 Set of 7 Drill Stop Collars $6.50 $12.99 $12.99 $12.99 $13.99 $13.99 $15.99 $15.99 $16.99 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”

INSTY-BIT 4-PIECE COUNTERSINK PILOT SET Insty Bit’s countersink drill bit set features 3/32”, 7/64”, 1/8” & 9/64” non-tapered hexshank drill bits. The hex-shank speeds up bit changes with a bit holder/extension & provides a superior grip when chucked directly into your drill.

197203

Insty Bit 4 Piece Countersink Pilot Set

$19.99

IRWIN® AUGER BITS Traditional hard-to-find tapershank solid center bits for use in hand braces.

43604 43605 43606 43607 43608 43609 43610 43697

1/4” $11.99 43611 11/16” 5/16” $11.99 43612 3/4” 3/8” $11.99 43613 13/16” 7/16” $11.99 43614 7/8” 1/2” $11.99 43615 15/16” 9/16” $11.99 43616 1” 5/8” $12.99 43624 1-1/2” Set of 13 Auger Bits in Pouch (1/4” –1”)

$12.99 $13.99 $14.99 $15.99 $15.99 $16.99 $24.99 $149.99

52 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

Spax® Unidrive Wood Screws

SPAX STAINLESS STEEL SCREWS

for marine applications Unique serrated pilot threads eliminate most pre-drilling Deep, sharp threads, thin shanks & visibly superior finishing complemented by an exclusive heat-bonded PTFE coating make these exceptionally strong screws penetrate more easily than any others. Their head design accepts both phillips or square drive bits. #6 screws use #1 square drive or phillips bits. #8 & #10 screws use #2 bits: #12 & #14 use #3 bits.

SCREW SCREW SIZE LENGTH #9 B451323 B451325 1-1/4” Qty. 90 Qty. 200 $16.99 $24.00 B451403 B451405 1-1/2” Qty. 80 Qty. 200 $16.99 $27.00 B451503 B451505 2” Qty. 65 Qty. 200 $16.99 $36.50 SCREW SIZE #10 B501603 B501605 2-1/2” Qty. 45 Qty. 100 $16.99 $22.00 B501753 B501755 3” Qty. 35 Qty. 100 $16.99 $29.50 B501903 B501905 3-1/2” Qty. 30 Qty. 100 $16.99 $38.00

SPAX FLAT-HEAD ZINC PLATED SCREWS for interior work SCREW LENGTH #6 350163 350165 5/8” Qty. 200 Qty.1000 $6.50 $17.00 350203 350205 3/4” Qty. 175 Qty. 1000 $6.50 $19.00 350253 350255 1” Qty. 150 Qty. 1000 $6.50 $20.00 350323 350325 1-1/4” Qty. 125 Qty. 1000 $6.50 $24.00 350403 350405 1-1/2” Qty. 110 Qty. 1000 $6.50 $27.00 350453 350455 1-3/4” Qty. 100 Qty. 1000 $6.50 $31.50 350505 2” Qty. 500 $16.50

400162 Qty. 40 $2.50 400203 Qty. 150 $6.50 400253 Qty. 125 $6.50 400323 Qty. 110 $6.50 400403 Qty. 100 $6.50 400453 Qty. 80 $6.50 400503 Qty. 75 $6.50 400603 Qty. 75 $6.50

SPAX SCREW ASSORTMENTS Small Set has 180 yellow zinc screws from #6 x 5/8" to #10 x 2", plus #2 square & phillips bits.

Large Set has 330 2-1/2” zinc plated screws, 2 insert bits & a magnetic 3” bit holder/screwdriver.

Both Spax sets come in durable plastic boxes 3-1/2” with see-through lids.

9130023 9130022

Small Spax Screw Assortment Large Spax Screw Assortment

$15.99 $24.99

Go to our website to see Spax Galvanized, Yellow Zinc & Pan-Head Screws

HOLLOW SCREW EXTRACTORS These simple tools remove broken screws in wood (a problem you will not have with Spax screws). The hollow bits cut free a core of wood around the screw. Pop out the core with the broken screw & fill the hole with a dowel or plug.

185104 185110 185105 185112

1/4” Screw Extractor (up to #6 ) 5/16” Screw Extractor (up to #10 ) 3/8” Screw Extractor (up to #14 ) Set of 3 Screw Extractors

$15.99 $15.99 $15.99 $42.99

ADJUSTABLE TORQUE SCREWDRIVER This screwdriver is truly unique. With a turn of a wrist, the spring loaded slip clutch goes from 2-36 in/ lb of torque with an accuracy of ±6%. When you’ve reached the desired torque, the clutch disengages. A built-in scale indicates your setting. Includes 26 hex bits with 1/4” shanks, a 2” extension, a 1/4” drive adapter for sockets all in a fitted plastic case.

168088

Adjustable Torque Screwdriver

$46.99

HEAVY DUTY SCREWDRIVERS These hefty screwdrivers are forged from high carbon steel & have the blade running the tool’s full length. Hardwood handle cheeks are riveted onto the easy to grip, oval shaped handle. While they may not be the most handsome screwdrivers in your shop, you’re not likely to bend them during those misapplied “screwdriver as a prybar” moments.

169105

Set of 4 Heavy Duty Screwdrivers

SCREW SIZE

#8

$19.99

400165 Qty.1000 $20.00 400205 Qty. 1000 $21.00 400255 Qty. 1000 $23.50 400325 Qty. 1000 $28.00 400405 Qty. 1000 $32.00 400455 Qty. 500 $18.50 400505 Qty. 500 $21.00 400605 Qty. 500 $26.00 400755 Qty. 200 $11.50

#10

500202 Qty. 25 $2.50 500252 Qty. 20 $2.50 500323 Qty. 80 $6.50 500403 Qty. 60 $6.50

500205 Qty. 1000 $30.50 500255 Qty. 1000 $33.00 500325 Qty. 500 $21.00 500405 Qty. 500 $23.00

500503 Qty. 50 $6.50 500603 Qty. 50 $6.50 500753 Qty. 35 $6.50 500903 Qty. 30 $6.50

500505 Qty. 500 $28.50 500605 Qty. 500 $32.50 500755 Qty. 200 $17.50 500905 Qty. 200 $19.50

#12 550202 Qty. 20 $2.50 550252 Qty. 20 $2.50 550322 Qty. 15 $2.50 550403 Qty. 50 $6.50 550453 Qty. 50 $6.50 550503 Qty. 50 $6.50 550603 Qty. 40 $6.50 550753 Qty. 30 $6.50 550903 Qty. 30 $6.50

550205 Qty. 500 $20.00 550255 Qty. 500 $22.00 550325 Qty. 500 $26.50 550405 Qty. 500 $29.50 550455 Qty. 500 $33.00 550505 Qty. 200 $14.00 550605 Qty. 200 $15.50 550755 Qty. 200 $22.00 550905 Qty. 200 $23.00

#14

600252 Qty. 15 $2.50 600322 Qty. 12 $2.50 600403 Qty. 40 $6.50

600255 Qty. 500 $27.50 600325 Qty. 50 $31.50 600405 Qty. 500 $35.50

600503 Qty. 40 $6.50 600603 Qty. 35 $6.50 600753 Qty. 30 $6.50 600903 Qty. 25 $6.50

600505 Qty. 200 $16.00 600605 Qty. 200 $17.50 600755 Qty. 200 $22.00 600905 Qty. 200 $26.50 MADE IN

SPIRAL RATCHET SCREWDRIVERS GERMANY A simple push operates these drivers in forward or reverse, and you can lock the clutch for high-torque manual driving as well (just like Yankees). The Compact Spiral Ratchet Screwdriver is 13” OAL, with 2 revolutions per 3” stroke & 5.5mm dia. driver bits.

The Medium SRS is 19” long extended, & its powerful 5” stroke delivers 2-1/2 revs. Driver bits are 7mm dia.

Both include 3 bits, 2 straights and 1 phillips.

Standard models accept Yankee style notched & tongued driver bits. Hex models include a chuck that accepts standard 1/4” (single or double ended) hex driver bits and come with 3 doubleended straight/phillips combo driver bits. All have wooden handles.

161861 161891 161871 161892

Schröder Compact SRS Compact Hex Chuck SRS Schröder Medium SRS Medium Hex Chuck SRS

$34.99 $39.99 $49.99 $54.99

$49.99 $54.99 $64.99 $69.99

HEX ADAPTERS FOR SPIRAL RATCHET SCREWDRIVERS Use common hex shank driver bits in your Yankee Spiral Screwdriver!

Add versatility to your spiral screwdriver, or reactivate one that has no driver bits. The adapter’s notched shank fits into your spiral ratcheting screwdriver and will accept any 1/4” hex-shank bit. A knurled threaded ring secures your driver bits into the collet and a magnet magnetizes the driver bit. We recommend you measure your existing round shank bit to determine what size adapter will fit your screwdriver.

Large adapter fits Yankee model 131; Medium fits Yankee 130; and Compact fits 135. OAL is 3”. Driver bits not included.

161853 Compact Hex Adapter 5.5mm (7/32”) shank $16.99 161854 Medium Hex Adapter 7mm (9/32”) shank $16.99 161855 Large Hex Adapter 8mm (5/16”) shank $16.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 53

Wood Slicer® Bandsaw Blades

Super Sharp Thin-Kerf Precision Resawing Blades

Our famous Wood Slicer® bandsaw blade cuts smoother & quieter than any other resawing blade on the market. Its outstanding performance is due to its variable tooth pitch design, in which uneven spacing between the teeth nearly eliminates vibration during a cut. The Wood Slicer's tooth pattern damps harmonic resonance extremely effectively; the result is superlatively smooth cuts & much, much quieter operation than ordinary blades. In tests here at the store, our Slicer averaged 8 decibels quieter than a popular brand-name 1/2", 3-tooth blade cutting 2" walnut, & 14dB quieter in 6" walnut.

Fine Woodworking rated our Wood Slicer® as “Best All-Round Performer” in their independent test for speed, flatness & smoothness!

1/2” WOOD SLICER® RESAWING BLADES

Quality of cut is simply fabulous. Resawn surfaces are extraordinarily smooth, with few torn or broken fibers & nearly invisible tooth marks. Testing the blades here at the store, we’ve produced 9” wide veneers no thicker than 1/32”, clean enough for glue-up & ready to begin sanding at 100X. We’ve never seen a resawing blade cut this smoothly, & we’ll bet you haven’t either.

SHARPER Our manufacturer has developed exclusive sharpening technology that gives Wood Slicers® the sharpest teeth in the industry. Their highly precise grinding process leaves a crisp, burr-free tooth with smooth, clean gullets that transport waste efficiently & resist resin build-up. The difference is amazing.

You’ll cut any stock, regardless of its hardness, faster & more easily than you’ve ever done before. Finished blades are individually wrapped to avoid damage during handling. $36.99 HARDER Wood Slicer® teeth are phenomenally hard, $40.99 Rc 65-67, as hard as the edge of a fine Japanese chisel. After sharpening & setting, Slicers $47.99 are sent through a high-speed, ultra-high voltage precision impulse hardening system which treats the face & cutting edges of each 3/4” WOOD SLICER® RESAWING BLADES 142” $38.99 tooth without allowing hardening to extend 1952105 105” $36.99 1952142 1952106 106” $36.99 1952143 143” $41.99 into the gullet, which would create a potential 1952108 108” $36.99 1952144 144” $41.99 source of fatigue failure.

1952111 111” $36.99 1952145 145” $41.99 STRONGER 1952112 112” $36.99 1952149 149” $41.99 The Wood Slicer®’s 1/2” wide carbon-man1952113 113” $36.99 1952150 150” $41.99 1952120 120” $38.99 1952154 154” $41.99 ganese spring steel bodies have twice the ten1952121 121” $38.99 1952155 155” $41.99 sile strength of conventional 1/2” bandsaw 1952123 123” $38.99 1952156 156-1/2” $41.99 blades, & they are much harder as well.

1952124 124” $38.99 1952161 Our blade’s strength is complemented by 161” $41.99 1952125 125” $38.99 1952165 165” $41.99 the extraordinary quality of its weld. State-of1952128 128” $38.99 1952166 166” $41.99 the-art flash butt up-set welding produces a 1952130 130” $38.99 1952A Custom Length $41.99 quenched & tempered metallurgical structure 1952131 131-1/2” $38.99 (105” to 121”) identical to the rest of the blade— no softer, 1952132 132” $38.99 1952B Custom Length $42.99 harder, or more prone to failure.

1952133 133” $38.99 (122” to 142”) The technique is so effective that all 1952136 136” $38.99 1952C Custom Length $47.99 Wood Slicers® are unconditionally (143” to 172”) 1952137 137” $38.99 1952140 140” $38.99 1952D Custom Length $54.99 guaranteed against breakage at the weld.

(173” to 248”) 1952141 141” $38.99 THINNER For special order sizes, please provide us with the length you need to High strength blades let us specify band the nearest 1/4”. Please allow 4-6 weeks for delivery of custom lengths. thickness of just .022”, 12% thinner than usual, without sacrificing the stiffness & beam strength required for clean, accurate resawing. Set angle is very minimal giving a total kerf width of barely 1/32” thus minimizing waste. (Due to the minimal tooth set, the Wood Slicer is not recommended to cut green wood.) This means you waste about half as much wood as with a regular blade, & you demand half as much work from your saw, which gives you less back pressure, faster feed rates, & lower impact on thrust bearings & lateral guides. Slicers’ rear edges are rounded & polished, extending the life of your thrust bearings & eliminating a potential source of fatigue cracks. Precise setting, polishing & rounding the back makes for smoother cuts & nearly eliminates blade lead, making it easier & faster to set up your fence for straight, accurate resawing in any material thickness.

GUARANTEED If you want to mill lumber to custom thickness or generate your own veneers, try a Wood Slicer® blade for yourself. You’ll get results you never thought your bandsaw could deliver, with smoother, straighter, faster cuts than you’ve gotten from any other resawing blade. You’ll feel as if you just installed a larger motor on your saw, and you’ll love the minimal finishing required on your resawn stock. Your satisfaction is guaranteed!

485270 70-1/2” 485272 72” 485273 73” 485280 80-1/2” 485282 82” 485289 89-1/2” 485292 92” 485293 93-1/2" 485295 95” 485296 96” 485298 98” 4852997 99-3/4” 4852100 100” 48521005 100-1/2” 4852102 102” 4852103 103” 4852104 104” 4852105 105” 4852106 106” 4852108 108” 4852111 111” 4852112 112” 4852113 113” 4852120 120” 4852121 121” 4852123 123” 4852124 124” 4582125 125”

$29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $29.99 $31.99 $31.99 $31.99 $31.99 $31.99

4582128 128” 4852130 130” 4852131 131-1/2” 4852132 132” 4852133 133” 4852136 136” 4852137 137” 4852140 140” 4852141 141” 4852142 142” 4852143 143” 4852144 144” 4852145 145” 4852149 149” 4852150 150” 4852154 154” 4852155 155” 4852156 156-1/2” 4852161 161” 4852165 165” 4852166 166” 4852A Custom Length (60" to 121”) 4852B Custom Length (122” to 142”) 4852C Custom Length (143” to 172”) 4852D Custom Length (173” to 248”)

$31.99 $31.99 $31.99 $31.99 $31.99 $31.99 $31.99 $33.99 $33.99 $33.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $34.99 $35.99

VARIABLE PITCH DESIGN DRAMATICALLY IMPROVES PERFORMANCE

54 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

WIDTH TPI TOOTH GENERAL PURPOSE 1/8” 14 std.

BANDSAW BLADES Sterling brand blades by Dia- 3/16” 4 skip 6 hook mond Saw have quality welds & 1/4” 3/8” 4 skip cut smoothly. Teeth set is mod- 1/2” 3 hook est, trading just a bit of the mini- 3/4” 3 hook mum radius capability for cleaner cutting.

BLADE LENGTH 70-1/2” 72” 73”

1/8” $14.99 183615 183402 183410 80-1/2” 183418 82” 183426

BLADE 1/8” LENGTH $16.99 89-1/2” 183610 93-1/2” 183434 95” 183642 99-3/4” 183551 105” 183442 106” 183628 111” 183529 113” 183450 BLADE 1/8” LENGTH $18.99 123” 183523 124” 183458 125” 183665 BLADE 1/8” LENGTH $19.99 130” 183525 131-1/2” 183557 132” 183527 133” 183463 137” BLADE LENGTH 142” 143” 145”

1/4” $22.99 183483 183502 183473

BLADE WIDTH 3/16” 1/4” 3/8” $17.50 $17.50 $17.50 183616 183617 183618 183403 183404 183405 183411 183412 183413 183419 183420 183421 183427 183428 183429 BLADE WIDTH 3/16” 1/4” 3/8” $19.50 $19.50 $19.50 183611 183612 183613 183435 183436 183437 183637 183638 183639 183552 183553 183554 183443 183444 183445 183629 183630 183631 183522 183498 183504 183451 183452 183453 BLADE WIDTH 3/16” 1/4” 3/8” $20.99 $20.99 $21.99 183524 183499 183505 183459 183460 183461 183671 183664 183672 BLADE WIDTH 3/16” 1/4” 3/8” $21.99 $21.99 $22.99 183526 183500 183506 183558 183559 183560 183528 183501 183507 183464 183465 183466 183544 183545 BLADE WIDTH 3/8” 1/2” 3/4” $23.99 $23.99 $27.99 183484 183485 183486 183508 183514 183520 183474 183475 183476 BLADE WIDTH 3/8” 1/2” 3/4” $24.99 $24.99 $29.99 183577 183578 183579 183478 183479 183480 183568 183570 183571 183509 183515 183521 183564 183565 183566

1/2” $17.99 183619 183406 183414 183422 183430

Saw Blades

3/8” WOODTURNER’S BANDSAW BLADE Our 3/8” WoodTurners’ Bandsaw Blade, with it’s 3 tpi alternate set with raker tooth pattern & stout band thickness of .032” is perfect for cutting green wood. This blade’s strong tooth set provides plenty of room to keep the blade zipping through green, wet logs & lumber. The deep, rounded, hook-toothed gullets allow chips to be easily removed from the kerf for quick, aggressive cuts. Hardened teeth (Rc 64-65) stand-up to dulling bark & log-grime (we recommend removing as much grit as possible from your stock before cutting). Cutting radius as small as 1-1/2”.

1964125 125” $22.99

1/2” $19.99 183614 183438 183640 183555 183446 183632 183510 183454

3/4” $23.99 183468 183641 183556 183469 183633 183516 183470

1/2” $21.99 183511 183462 183673

3/4” $25.99 183517 183471 183674

1/2” $22.99 183512 183561 183513 183467 183546

3/4” $26.99 183518 183562 183519 183472 183547

196470 196472 196473 196480 196482 1964895 196493 196495 196498 1964100 1964105 1964106 1964111 1964113 1964123 1964124

70-1/2” 72” 73” 80-1/2” 82” 89-1/2” 93-1/2” 95” 98” 100” 105” 106” 111” 113” 123” 124”

$17.99 $17.99 $17.99 $18.99 $19.50 $18.99 $20.99 $20.99 $20.99 $20.99 $21.99 $21.99 $21.99 $21.99 $22.99 $22.99

1964130 130” $23.99 1964131 131-1/2” $23.99 1964132 132” $23.99 1964133 133” $23.99 1964136 136” $23.99 1964137 137” $23.99 1964140 140” $24.99 1964142 142” $24.99 1964143 143” $24.99 1964145 145” $24.99 1964149 149” $24.99 1964150 150” $25.99 1964154 154” $26.99 1964155 155” $26.99 1964156 156-1/2” $26.99 1964161 161” $26.99

FREUD 8” PRO DADO SET Cuts dados 1/4” to 7/8” 2 outside cutter plates (12 carbide teeth ea.) combine with 3 2-toothed chipper blades, 3 spacers & 5 shims for creating flat bottom dados. Chrome coated blades resist surface tarnish. Rugged plastic storage case protects edges.

172009 Freud 8” Pro Dado Set (5/8” arbor) $99.99

SET OF 6 MAGNETIC DADO SHIMS 107002 Magnetic Dado Shims

(2 ea. .010”, .012” & .015”)

LENOX TRI-MASTER CARBIDE-TIPPED BANDSAW BLADES BLADE 1/4” The long-wearing LENGTH $23.99 hardness of carbide 149” 183576 teeth out performs 183477 150” bi-metal & carbon steel 154” 183567 blades & will keep on 155” 183503 cutting long after 156-1/2” 183563 ordinary blades have lived their useful life.

If your bandsaw blades are dulling too quickly, consider our Lenox Tri-Master Carbide Tipped blades. Carbide tipped bandsaw blades are the cat with 9 lives amongst bandsaw blades. Mark Duginske, bandsaw guru & author says that carbide bandsaw blades can outlive standard blades by nearly a factor of 100. While this performance comes with a higher cost, there may be times where certain cutting jobs go more easily & predictably when using a carbide tipped blade versus a standard bandsaw blade. Abrasive and overly hard, tough wood species, as well as plywood and MDF, are materials the Tri-Master will process with ease. Tri-Master blades are available in 1/2” & 3/4” widths, both with 3 tpi. 1/2” blades are .025” thick with a 3/64” kerf. 3/4” blades are .035” thick with a 1/16” kerf.

If we don’t list the size you need, call us at 800-241-6748. We can special order any Tri-Master length.

Blade Length 93-1/2” 95” 99-3/4” 104” 105” 106” 108” 111” 112” 113” 123” 124” 125” 130” 131-1/2” 132” 133” 137” 142” 143” 145” 149” 150” 151-1/2” 152-1/2” 154” 155” 156-1/2”

$12.99

Lenox Tri-Master CT Lenox Tri-Master CT 1/2” Wide 3/4” Wide 196693 $131.99 196793 $145.99 196695 $132.99 196795 $145.99 19669975 $140.99 19679975 $153.99 1966104 $147.99 1967104 $162.99 1966105 $147.99 1967105 $162.99 1966106 $147.99 1967106 $162.99 1966108 $147.99 1967108 $162.99 1966111 $155.99 1967111 $170.99 1966112 $155.99 1967112 $170.99 1966113 $155.99 1967113 $170.99 1966123 $171.99 1967123 $188.99 1966124 $171.99 1967124 $188.99 1966125 $171.99 1967125 $188.99 1966130 $179.99 1967130 $196.99 19661315 $179.99 19671315 $196.99 1966132 $179.99 1967132 $196.99 1966133 $186.99 1967133 $204.99 1966137 $186.99 1967137 $204.99 1966142 $194.99 1967142 $213.99 1966143 $194.99 1967143 $213.99 1966145 $202.99 1967145 $222.99 1966149 $202.99 1967149 $222.99 1966150 $202.99 1967150 $222.99 19661515 $210.99 19671515 $231.99 19661525 $210.99 19671525 $231.99 1966154 $210.99 1967154 $231.99 1966155 $210.99 1967155 $231.99 19661565 $218.99 19671565 $239.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 55

Bandsaw Accessories

BANDROLLERS Ball Bearing Guides Bandrollers are designed to slip right in your saw’s 1/2” x 1/2” guide holders. They have double-sealed ball bearings that run virtually friction free so they can be in direct contact with the blade without causing excessive heat or blade wear. The Delta set has one lower guide angled at 45°. The Taiwan set has all 4 guides straight. Use with 1/4” or wider blades. Use Cool Blocks for 3/16” & 1/8” wide blades.

489001 489002

Bandrollers for Delta 14” Saws Bandrollers for Taiwan 14” Saws

$69.99 $69.99

BANDSAW “COOL BLOCKS” Prolong Blade Life & Increase Accuracy These graphite impregnated, phenolic resin composite blocks allow you to set the bandsaw blade closer than with regular metal guide blocks for more stable & accurate cutting. With friction & heat reduced, blades run more coolly, smoothly & quietly & last longer.

486001 486005 486002 486006 486009 486004 486010

Delta 14” 1/2” x 1/2” x 3/4” (1 beveled) $13.99 Jet 14”, Ridgid 1/2” x 1/2”x 3/4” $13.99 Sears 12”, Delta 10” 3/8” x 3/8” x 3/4” $13.99 Old Sears 1/4” round x 3/4” $13.99 Jet & Delta 12” 5/16” square x 3/4” $13.99 Shopsmith 11” $13.99 Delta 8” 3/16” round x 7/8” $13.99

BANDSAW ZERO-CLEARANCE THROAT PLATES These UHMW plastic zero-clearance inserts virtually eliminate tear out on the bottom side of your work. Simply saw a narrow kerf partway through the plate & slide it around the blade into your saw’s throat opening. Sold in packs of 4.

489005 Throat Plates for Delta & Steel City 14” Saws $13.99 489006 Throat Plates for most 10” Saws $13.99 489007 Throat Plates for 10”, 14” & 18” Jet $13.99

BANDSAW THRUST BEARING SET Replace your bandsaw’s worn thrust bearings with these high-quality replacement bearings that are packed with hightemperature grease & have double seals to keep out dust. Reversible for long life. Set of 2 bearings fits Delta & Jet 14” & most clones. 3/8” i.d., 1-3/16” o.d.

189101

14” Bandsaw Thrust Bearing Set

CARTER BANDSAW TIRES

$17.99

Replace your old & weathered bandsaw tires with these durable & long wearing Blue Urethane or Rubber tires.

Blue Urethane tires are a consistent 3/32” thick across their width for optimum blade tracking & are typically installed without adhesive. Rubber Stretch-On Tires may require an adhesive. Prices are for a single tire.

CARTER BANDSAW TIRES (1 each) Blue Urethane (dia x width) Rubber (dia x width x thickness) 189221 12” x 7/8” $25.99 189203 10” x 3/4” x 1/8” $18.99 189222 14” x 7/8” $30.99 189204 12” x 1-1/16” x 5/32” $19.99 189223 16” x 1-1/2” $41.99 189205 14” x 1-1/16” x 5/32” $23.99 189224 18” x 1-1/2” $44.99 189206 16” x 1-5/16” x 5/32” $31.99

BANDSAW QUICK CRANK TENSIONER The small tension knobs standard Release tension on many 14” bandsaws are slow at the & tedious to use, making blade end of changes a chore. With this crank every day’s work!

BANDSAW WHEEL BRUSH Keeps bandsaw

wheels free of debris, improving tire life & blade tracking

1-1/2” long nylon stock filaments constantly brush the wheel, sweeping it clean without excessive abrasion. Just drill 1 hole in the rear blade guard to mount next to lower wheel.

189104

Wheel Brush for 14” Bandsaws

$7.99

CARTER MAGFENCE II NEW! Magnetic Bandsaw Fence Just a twist of 2 knobs engages powerful magnets to hold down this 15” long x 3” tall universal aluminum fence to your cast iron bandsaw table, avoiding tedious installation. T-slots allow for accessory attachments. Also works on cast iron drill press tables.

189262

MAGFENCE II Bandsaw Fence

$99.99

Kreg Bandsaw Fence Kreg Precision Micro-Adjuster Kreg 4-1/2” Resaw Guide Kreg 7” Resaw Guide

$119.99 $17.99 $19.99 $22.99

KREG BANDSAW FENCE A vast improvement over stock fences found on most 14” saws, this 18” aluminum extruded fence adjusts front to back along its length, fastens at any point along the 26” front rail & adjusts for blade lead. The fence easily accepts shop made add-ons like high fences, stop blocks or Kreg’s optional curved resaw guide. Included tape scale reads easily with the integral lens cursor. Optional microadjuster lets you precisely dial in width of cut.

124023 124024 124025 124026

HEAVY DUTY BANDSAW TENSIONING CRANK Replace the puny tension knob found on many 14” bandsaws with this 5” cast-iron, chromeRetrofits plated hand wheel crank with 3/8” acme many JET, threaded rod. It quickly lowers & raisCraftsman, Grizzly, Ridgid es the wheel on your bandsaw for blade changes. Massive bronze & Delta/Rockwell replacement nut helps eliminate 14” bandsaws play in the rod. Installation is quick & tool free. May not fit some saws with quick release lever arms.

185193

Heavy Duty Bandsaw Crank

$44.99

NEW COMPLETE GUIDE TO THE BAND SAW An excellent resource that you’ll often use Mark Duginske’s Band Saw Handbook has long been the volume we recommend as a treatise on understanding & using bandsaws. It’s been completely updated with color photos & includes info on after market accessories, blade selection, saw tuning, resawing, joinery techniques & special projects.

203681 New Guide to the Band Saw

$14.96 $19.95

HIGH TENSION SPRING for 14” Bandsaws The compression spring in your bandsaw’s upper wheel assembly cushions against sudden shock or increased tension if the blade bows within a cut. Revitalize your saw by replacing the old, fatigued spring with this flat stock high strength chrome-vanadium alloy spring, coiled & milled flat on the ends for superior performance.

489003 489004

2-1/2” Bandsaw Spring for Delta $16.99 3” Bandsaw Spring for Jet & similar 14” $16.99

handle you can tighten or release the blade tension in seconds & slacken the blade at day’s end. Fits most 14” woodworking bandsaws. Includes 3/8”-16 square nut to replace the metric nut in some saws.

185189

Bandsaw Quick Crank

$24.99

Blade Rounding Stone

$12.99

BLADE ROUNDING STONE This silicon carbide stone allows you to gently round the back corners on your bandsaw blades so they’ll run more coolly, quietly & efficiently. The 3” x 1/2” stone (used dry) is mounted on a 7” hardwood handle.

486031

56 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Dia. & Tooth Count

Kerf

(* 1” bore)

WOODWORKER II General Purpose Table Saw 456005 12” x 40 * 1/8” $139.99 456001 10” x 40 1/8” $122.99 456006 10” x 40 3/32” $122.99 456002 10” x 30 1/8” $109.99 456003 9” x 40 1/8” $116.99 456004 8” x 40 3/32” $109.99 WOODWORKER II 48-tooth 192818 10” x 48 1/8” $129.99 WOODWORKER I Chop Saws & Radial Arm Saws 456010 12” x 60 * 1/8” $144.99 456011 10” x 60 3/32” $134.99 456012 9” x 60 3/32” $124.99 456013 8” x 60 3/32” $114.99 CHOPMASTER BLADES Miter Saws 456007 10” x 80 .105” $145.99 456008 12” x 80 * .115” $156.99 DURALINE HIGH-A/T BLADE Table Saws 456027 10” x 80 1/8” $156.99

Table Saw Blades & Accessories FORREST PREMIUM CARBIDE-TIPPED SAW BLADES

Of all the different makes of blades we’ve tried, none have cut as well as a Forrest. Forrest guarantees their blades will completely satisfy you, and our customers say it’s the absolute truth.

Woodworker II 40-tooth blades rip, crosscut & cut sheet materials beautifully; we recommend the thin-kerf model for 1-1/2HP or smaller saws. WoodWorker II 48-tooth gives even smoother crosscuts. For ripping thick stock, choose the 30-tooth Woodworker II. Woodworker I 60-tooth crosscut blades are for chop saws & radial arms, or for crosscutting & joinery on the table saw. Smooth cutting Chopmaster blades for standard or sliding miter saws are 80-tooth thin-kerfs. The 80-tooth Duraline High-A/T blade has a very steep ATB design that slices veneered plywood, low pressure laminates & solid wood exceptionally well with a nice, clean cut bottom surface.

FORREST BLADE STIFFENERS 456021 6” $28.99 456022 5”

$27.99

456023

4” $25.99

INCRA V27 PRECISION MITER GAUGE Instantly add precision to any machine

with standard miter slots: table saws, bandsaws, router tables, shapers, or disc sanders.

The bar includes 4 adjustable expansion discs, so you can have a low-friction, no slop fit. 27 laser-cut V-stops are at 5°intervals; 60° of continuous adjustment (in both directions) is possible by disengaging the V-stop. Adjustable protractor head. Front face is bored to accept fences.

141020 Incra V27 $64.99 FORREST 6” & 8” DADO-KINGS 24 tooth outside cutters & 4 tooth chippers, KREG PRECISION MITER GAUGE make supremely clean, flat bottom dados Includes Kreg’s 24” Heavy-Duty Aluminum Trak, with no tear out in hardwoods. Four 1/8”, a Precision Stop & Self-adhesive Rule Tape 1/16” & a 1/32” chipper cut grooves from 1/4” A CNC machined head with an easyto 29/32” in 1/32” increments. Custom carbide to-read Vernier allows precise adjustments makes extremely sharp & long lasting cutting tips. to the nearest 1/10°. The generous 24” long, aluminum guide bar has 5 nylon bar adjusting plugs to 456018 6” Forrest Dado-King $279.99 456015 8” Forrest Dado-King $299.99 prevent play between the bar & the table slot. 0, 10, 22-1/2, 30 & 45°angles are set by a bronze shot pin.

THE WORLD'S FINEST ZERO-CLEARANCE 124019 Kreg Precision Miter Gauge System $149.99 REAR RETAINING PIN THROAT PLATES 124009 Kreg Precision Miter Gauge Head

$109.99

GRIP-TITE MAGNETIC FEATHER BOARD An 80 lb. magnet keeps this feather board where you position it on any steel surface.

Flexible polycarbonate wings & hold-down tab apply side pressure on the left, right & downward, for max. stock control.

486024

Grip-Tite Magnetic Feather Board

$44.99

TAPER JIG

This ingenious aluminum jig gives you a controlled repeatable way to cut tapered parts like furniture legs on the table saw. Allows a taper up to 3” per foot (15°). Use it on either side of a rip fence.

169121

Taper Jig

$14.99

HIGHLAND WOODWORKING DELUXE SLIDING TABLE KIT

Lets you safely crosscut wide & lengthy stock on your table saw in dimensions far greater than possible with a miter gauge.

Our plans help you create a sled that accommodates stock up to 24” wide, & will crosscut in lengths up to 6’.

The plans include a pair of our solid phenolic runners to fit in your miter slots, & a thermo-formed Lexan® blade cover. To build the table, you supply a piece of 1/2” or 3/4” plywood or MDF approx. 3’ x 3’ for the bottom & wood to make 2 fences 1-1/2” x 4-1/2” x 37”.

487000

Deluxe Sliding Table Kit

$34.99

GRR-RIPPER Advanced GR-200 System A stock control system that makes it safe to do close work on the tablesaw & router.

The GRPR grips, holds & feeds both sides of small workpieces, ripping strips as narrow as 1/4” (1/8” with optional leg). Non-slip pads hold material securely, while the body of the jig covers the blade for safety. See over 30 applications on the GRPR DVD. 169583 GRR-Ripper Advanced GR-200 System $79.99 169587 1/8” GRR-Ripper Side Leg $15.99 169588 GRPR DVD (see demo on our website) $9.99

Custom throat plates are one of the handiest accessories for your saw, SIDE ADJUSTMENT preventing cut-off kickback, limiting SCREW chip-out & providing solid stock support. Our 1/2” thick melaminecoated solid phenolic resin blanks are flatter, stiffer & slicker than any other throat plates you can buy.

LEVELING SCREWS

PRE-CUT BLADE POCKET UNDERNEATH

2-POINT SIDE These plates feature lateral & end BEARING LUGS adjustment screws in addition to LENGTH ADJUSTMENT SCREW 4 leveling screws (accessible from the top), & a steel retaining pin to keep the rear of the blank (except on Jet & older Sears blanks) from lifting.

A finger hole makes removal easy. The bottom of each blank is grooved to house your 10” saw blade, so you can cut the blade opening without resorting to a first cut with a smaller blade. We stock phenolic sheets big enough for 2 plates, for making custom plates to fit other saws. Go to our website to see other models.

DL1 Delta (13-3/8” x 3-3/4”) $24.99 (Left or Right Tilt Unisaw, Tilting Arbor & Contractors Saw) DL2 Delta 10” Direct Drive Saws(12-1/2” x 3-3/4”) $24.99 DW2 DeWalt 744 Saw (13-9/16” x 3-3/4”) $25.99 PM1 Powermatic 66 (14-7/16” x 4”) $25.99 GE1 General 350 (13-13/16” x 3-1/2”) $25.99 JT1 Jet, Powermatic Artisan (12-1/2” x 3-1/2”) $25.99 JT2L Jet Xacta Left Tilt (13-5/16” x 3-11/16”) $25.99 CR1 Craftsman (14” x 3-3/4”) $25.99 CR2 Older Craftsman (14-3/8” x 3-3/4”x 3/16”) $26.99 CR3 Vintage Sears-Pre 1960 $27.99

(14-3/8” x 3-3/4” x 3/32”) 168024 RG-1 Rigid TXS3650 & TS3660 (cast iron top) $26.99 168023 JTSS Jet Supersaw JWS-10LFR $25.99 168027 Powermatic 72A (20-5/8” x 4”) $99.99 168624 CR4 Sears 21833 & Grizzly G0715P $27.99 DW1 DeWalt 12” Miter Saws $11.99

DW703, 704, 705, 705S,706, 713, 715, 716 168613 HT1 Hitachi & PC (15-1/8” x 3-3/4”) $26.99 168623 BH2 Bosch 4000/4100 w/o riving slot $26.99 BK1 1/2” x 11” x 15” Phenolic Blank $25.99 BK2 1/4” x 11” x 15” Phenolic Blank $14.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS 57

Sanding

WAVE PERFORMANCE ABRASIVE SYSTEMS Wave Hi-Performance sanding discs are highly durable open-coat abrasives that remain bonded, resist loading, & stay sharp longer than the competition. Unique to the Wave system are their “wave” discs, with crenellated edges that flex smoothly & virtually eliminate swirls and sharp edge cuts on the inside of turnings. Discs mount directly on hook & loop sanding pads, or use Wave’s unique series of “innerface” pads to work with exactly the degree of stiffness & resilience you need. Innerface pads velcro onto your sanding pad; sanding discs then velcro onto the innerface.

156263 3” Velcro Poly-Wool Buffing Pad Black $11.99 156264 2” Disc Holder with 1/4” Mandrel $12.99 156265 3” Disc Holder with 1/4” Mandrel $14.99 Wave Starter Kits include disc holder with 1/4” mandrel; hard, soft, & extra-soft innerface pads, & 10 each 80, 120, 180, 220 & 320X Wave discs.

156281 2” Wave Starter Kit $46.99 156282 3” Wave Starter Kit $56.99

INNERFACE PADS

Mount between disc holder & sanding disc INNERFACE EXTRA SOFT SOFT 2” Wave 156273 $7.99 156266 $4.99 3” Wave 156274 $9.99 156267 $6.99 2” Round 156271 $7.99 156253 $4.99 3” Round 156272 $9.99 156254 $6.99

Fill in catalog item # with grit: 80, 100, 120, 150, 180, 220, 320, 400, 600, 800 1562__ 2” Wave Discs, Pack of 10 $3.99 1564__ 2” Wave Discs, Pack of 50 $15.99 1563__ 3” Wave Discs, Pack of 10 $5.50 1565__ 3” Wave Discs, Pack of 50 $23.99

AIR-FILLED CUSHION CONTOUR SANDER FOR LATHE OR DRILL PRESS Inflate this drum with a bicycle pump or compressor. Use low pressure for sanding a slight radius, or higher pressure for contour sanding odd shapes. Mount between centers on your lathe or vertically on your drill press with optional adapter (min. 10” clearance from drill chuck to table).

1610 3” x 8” Inflatable Sander $67.99 1301 Drill Press Adapter $23.99 SLEEVE ASSORTMENTS (2 ea. 80, 100, 120, &150X) 165099 3” x 8” Sleeve Assortment $21.99 168099 6” x 8” Sleeve Assortment $34.99

4.5” LONG SPINDLE SANDING SLEEVES (6 packs)

1/2” 3/4” 1” 1-1/2” 2” 3”

$9.99 $9.99 $9.99 $10.99 $12.99 $16.99

50X

163021 163001 163005 163009 163013 163017

80X

163022 163002 163006 163010 163014 163018

120X

163023 163003 163007 163011 163015 163019

156102 156121 156127 156122 156123 156124 156125 156126

Backing Pad for PSA P-C 330 Stikit Sanding Block 80X Roll (55” x 3-1/4”) 100X Roll (55” x 3-1/4”) 120X Roll (70” x 3-1/4”) 150X Roll (80” x 3-1/4”) 220X Roll (95” x 3-1/4”) 320X Roll (95” x 3-1/4”)

$11.99 $18.99 $3.50 $3.50 $3.50 $3.50 $3.50 $3.50

4-1/2” WIDE PSA ROLLS (10 yds.) $22.99 each 156112 100X 156114 150X 156116 220X 156113 120X 156115 180X 156117 320X 156111 80X 4-1/2” PSA Roll (10 yds.) $24.99 HARD 156268 $4.99 2” DRUM 156269 $6.99 SANDER SET This set of 4 sanding drums is 156255 $4.99 for an electric drill, drill press or flex shaft tool mount156256 $6.99 ed on 1/4” mandrels. Tighten a nut to secure or re-

HI-PERFORMANCE WAVE SANDING DISCS

Sleeve Dia.

PRESSURE SENSITIVE ADHESIVE SANDING SYSTEM Our PSA abrasive is tough, sharp aluminum oxide grit bonded to A weight paper with a reliable pressure-sensitive adhesive (PSA) backing.

For Porter Cable 330 palm sanders, we carry PSA backing pads designed to replace the sander's standard felt pads. PSA rolls are 4-1/2” wide by 10 yards long, enough for ninety 4” sheets.

For flat surfaces the Stikit Sanding Block has a firm 3-1/4” x 5” felt surface, crisp edges & a comfortable handle. 3-1/4” wide PSA rolls dispense from builtin storage.

Asst. (2 ea.)

163024 163004 163008 163012 163016 163020

lease sanding sleeves. Includes 1/2”, 3/4”, 1” & 1-1/2” dia. drums, each with coarse & fine 2” sanding sleeves.

SDK-12

Set of Four 2” Drum Sanders

2” LONG SANDING SLEEVES

$12.99

2” Sleeves are in packs of 9: 3 each of 50, 80 & 120X. 155042 1/2” x 2” 9-Pc Assortment $3.99 155043 3/4” x 2” 9-Pc Assortment $4.50 155044 1” x 2” 9-Pc Assortment $4.50 155045 1-1/2” x 2” 9-Pc Assortment $4.99 155046 2” x 2” 9-Pc Assortment $6.99

INDIVIDUAL SANDING DRUMS 155021 155022 155715

1” x 2” Sanding Drum (1/4” shank) $3.99 2” x 2” Sanding Drum (1/4” shank) $4.50 3” x 3” Sanding Drum (3/8” shank) $15.99

3” LONG X 3” DIA. SANDING SLEEVES 155048 155049 155050 155004

Grit 60 80 100 120 150 180 220 240 320

6 Pack Sleeves 50X $8.50 6 Pack Sleeves 80X $8.50 6 Pack Sleeves 120X $8.99 6 Piece Assort. (2 ea 50, 80 & 120X) $10.99

H&L SANDING DISCS PACKS OF 50 5" Dia. Discs 6” Dia. Discs

5 Hole 175560 $19.99 175580 $19.99 1755100 $19.99 1755120 $19.99 1755150 $19.99

8 Hole 175860 $19.99 175880 $19.99 1758100 $19.99 1758120 $19.99 1758150 $19.99

6 Hole 176660 $29.99 176680 $29.99 1766100 $29.99 1766120 $29.99 1766150 $29.99 1766180 $29.99 1755220 $19.99 1758220 $19.99 1755220 $29.99 1766240 $29.99 1755320 $19.99 1758320 $19.99 1766320 $29.99

ROUND HOOK & LOOP DISCS For sanding flat or convex surfaces where edge cutting is not a problem, use these conventional round discs. The H & L discs mount on the same 2” or 3” disc holders listed above with the Wave Hi-Performance system. Round innerface pads are Fill in catalog item # with grit: also available to fine-tune your sanding to the shape, 80, 100, 120, 150, 180, 220, 320, 400, 600, 800 hardness & finish of individual workpieces.

1572__ 2” H & L Discs, Pack of 10 $3.50 70370 Flexible Bowl Sanding Kit $17.99 1 ea. 2” & 3” dia. 100X H & L discs with 1/4” shafts (for drill) & 3 flexible Velcro-backed disks

1574__ 1573__ 1575__

2” H & L Discs, Pack of 50 3” H & L Discs, Pack of 10 3” H & L Discs, Pack of 50

$16.99 $4.50 $21.50

58 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Sanding

Norton High Performance 3X 3” H&L Discs NORTON HIGH PERFORMANCE 3X 50 pack Grit H&L DISCS, SANDPAPER SHEETS & NORZON SANDING BELTS 80 157101 $21.99 Norton High Performance 3X Norton High Performance 3X 100 157102 $21.99 5” H&L Discs 9” x 11” Sandpaper Sheets 120 157103 $21.99 2 pack 3 pack 10 pack 50 pack 3 pack 20 pack Grit 150 157104 $21.99 Grit 180 157105 $21.99 40 156788 $3.99 156797 $10.99 60 156701 $2.99 156710 $18.99 220 157106 $21.99 60 156789 $3.99 156798 $10.99 156806 $34.99 80 156702 $2.99 156711 $17.99 240 157107 $21.99 80 156790 $3.99 156799 $10.99 156807 $35.99 100 156703 $2.99 156712 $15.99 320 157108 $21.99 100 156791 $3.99 156800 $10.99 156808 $34.99 120 156704 $2.99 156713 $15.99 400 157109 $21.99 120 156792 $3.99 156801 $10.99 156809 $34.99 150 156705 $2.99 156714 $15.99 600 157110 $21.99 150 156793 $3.99 156802 $10.99 156810 $34.99 180 156706 $2.99 156715 $10.99 800 157111 $21.99 180 156794 $3.99 156803 $10.99 156811 $34.99 220 156707 $2.99 156716 $10.99 1000 157112 $21.99 220 156795 $3.99 156804 $10.99 156812 $34.99 320 156708 $2.99 156717 $10.99 1500 157113 $21.99 320 156796 $3.99 156805 $10.99 156813 $34.99 400 156709 $2.99 156718 $10.99 Norton’s High Performance 3X sandpaper, belts & discs feature a tightly graded, ceramic alumina abrasive that lasts longer & cuts faster, leaving a more consistent scratch pattern than conventional abrasives. A waterbased stearate coating that helps reduce clogging when sanding finishes & resinous woods will not contaminate your finishes.

NorZon 3X Sanding Belts The 5” Discs have a unique hole pattern that works with both 5 & 8 hole dust extraction. Grit 3” x 18” 5 pk 3” x 21” 5 pk 3” x 24” 5 pk 4” x 24” 5 pk Grit size on discs are P graded (FEPA).

50 156750 $11.99 156754 $12.99 156759 $13.99 156764 $23.99 Norton’s Sandpaper Sheets resist tearing yet 80 156751 $11.99 156755 $12.99 156760 $13.99 156765 $22.99 156756 $12.99 156761 $12.99 156766 $22.99 fold easily to fit into contours without losing 100 grit. Great for sanding bowls, goblets & spindles 120 156752 $11.99 156757 $12.99 156762 $13.99 156767 $22.99

Resin-bonded, heavy cloth NorZon Sanding Belts can be used in either direction.

156700

Norton 3X Sandpaper Sheet Assortortment (4 pk - 60, 100, 150, & 220X) $3.99

172927 Sandpaper Storage Chest $44.99

3M PREMIUM IMPERIAL™ WETORDRY™ These high quality 3M IMPERIAL™ WETORDRY™ 9” X 11” SANDPAPER SHEETS 9” x 11” sandpaper Grit Pack of 5 Pack of 50 sheets have precisely 220 156311 $6.50 156301 $54.99 graded abrasive for a 320 156312 $6.50 156302 $54.99 smooth & consistent 400 156313 $6.50 156303 $54.99 finish. 220-800X are durable, fast cutting 600 156314 $6.50 156304 $54.99 aluminium oxide.

800 156315 $6.50 156305 $54.99 1000-2500X are uni1000 156316 $9.50 156306 $84.99 form, smooth cut1200 156317 $9.50 156307 $84.99 ting silicon carbide.

1500 156318 $9.50 156308 $84.99 Finer grits are great 2000 156319 $9.50 156309 $84.99 for rubbing out or 2500 156320 $9.50 156310 $84.99 polishing finishes.

SANDING DETAILER KITS Kits include 4 color coded, spring-tensioned 6” x 1/4” sanding stick holders & 5 ea. of 4 different grit belts.

156901 Standard Sanding Kit (80, 120, 180, & 240X) $19.99 156902 Finishing Sanding Kit (240, 320, 400, & 600X) $19.99 5 PACKS OF SANDING BELTS $2.99 EACH 80X 156903 120X 156904 180X 156905 240X 156906 320X 156907 400X 156908 600X 156909

CONVEYOR BELTS 190027 190028 190029 190030 190031 190032 190033

Jet 10-20 Drum Sander Jet/Performax 16-32 Delta 18” Drum Sander Jet 22-44 Plus Performax 22-44 Pro, ShopPro 25 Performax SuperMax 37, 37x2 Performax 37, 37x2

EVERLAST SANDING BELTS 6048

Prolongs belt,

ABRASIVE CLEANERS disc & drum life Crepe rubber cleans sanding belts, discs & drums in seconds. Bench mount has 1/4” wooden base, drum cleaner has 1/4” plywood backer.

SANDPAPER STORAGE CHEST This handy piece of shop furniture will keep your sandpaper flat, clean & organized. 8 slide-out 10” x 12” trays each hold 50 sheets of sandpaper. 11” wide x 12” deep x 11” high.

$14.99 $39.99 $29.99 $39.99 $49.99 $49.99 $59.99

155301 155302 155304 155305

Small Belt Cleaner (4-1/4” x 1–3/8” x 1-3/8”) $5.99 Large Belt Cleaner (8” x 1-5/8” x 1-5/8”) $9.99 Bench Mount Cleaner (3” square x 1-1/2” thick) $6.99 Abrasive Drum Cleaner (15” x 20” x 3/4” thick) $99.99

SANDING BLOCK

Uses 1/6th sandpaper sheet

This closed-cell 3/8” thick cushioned neoprene pad has just the right amount of “give” for hand sanding flat surfaces. Pad is bonded to an unfinished Baltic birch plywood block with rounded edges.

177951

Sanding Block (1/2”high x 4-1/2” x 2-1/4”)

CORK SANDING BLOCK Wrap a 1/4-sheet of sandpaper around this lightweight, slightly resilient block & sand without dubbing over edges or rubbing through a finish.

154901

Cork Sanding Block

$6.99

$5.49

SOFT-SANDERS 3 Dimensional French Curves Easy to grip Soft-Sanders are shaped sanding blocks that fit every imaginable contour, curve & crevice. Each of the 6 color-coded 4-3/4” long sanders is supple enough to prevent gouging but firm enough to maintain details. They work with Super-Flex adhesive backed sandpaper, but will operate with any paper. Just spray adhesive on the back of the paper, & apply it to the profile. Includes one each of 80, 120 & 180X SuperFlex Sandpaper, a heavy, cloth-backed J-weight sanding abrasive that will not tear or crack. Each pack has four 2-3/4” x 5” adhesive-backed sheets.

156971 Soft-Sanders (Set of 6) $24.99 Soft Sander Super-Flex Sandpaper $4.99 per 4-pack 156972 40X 156974 80X 156976 120X 156978 180X 156973 60X 156975 100X 156977 150X 156979 220X

Everlast 6”x 48” Sanding Belt (specify 50, 80 or 120X)

$7.50

JET/PERFORMAX 16-32 PRE-CUT SANDPAPER Pre-cut sandpaper for Performax 16-32. For other sizes, call or check our website.

4816 16-32 Pre-Cut Packs (4 rolls per pack, specify 36, 60, 80, 100, 120, 150, 180, or 220X) $44.99 4816A 36, 80,120 Pre-Cut Abrasive Assortment (1 each 36X & 120X rolls & 2 rolls of 180X) $44.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR STAIN & FINISH COLORS 59

Dust Collection SHOP FOX 1-1/2HP DUST COLLECTOR This unit has a 1-1/2HP, 110V motor & a balanced 12” steel impeller that draws up to 1280 CFM while generating 12.3” of static pressure. A 4” ‘Y’ connector lets you set up two main hose runs. Wheeled base is 21-1/2” x 33-1/2”. Includes two 30 micron filter bags. Sound level is 82db at 6’. Stands 78” high. Weighs 105 lbs.

Ships within lower 48 states for $48 surcharge.

115101 Shop Fox 1-1/2HP Dust Collector 192503 20” 3 Micron Filter Bags, each

Connecting Your Machines to a Dust Collector Our hoods, blast gates, splices, Ys, & Ts are ABS plastic (which fit inside 4” PVC or stove pipe). Elbows, increasers & reducers are ABS or galvanized steel as indicated.

A

B

C

G

D

I

H

M

L

N

P O

Q

A BLACK DUST HOSE (10’ LENGTHS)

192668 2” $11.99 192615 3” $15.99 192616 4” $20.99 192617 5” $23.99 192618 2-1/2” Shop Vac Hose $13.99 CLEAR DUST HOSE (10’ LENGTHS) 192669 2” $13.99 192653 2-1/2” $16.99 192654 3” $17.99 192655 4” $23.99 192659 4” w/reinforcing wire $46.99 192667 192620 192621 192622 192623

2-1/2” 3” 4” 5” 6”

192610 192611 192612 192613 192614 192665 192666

2-1/2” 2” 3” 4” 5” 2-3/4” w/thumbscrew 4” w/thumbscrew

C HOSE CLAMPS

J K

R

Dust Collection Starter Kit

Two 4” Blast Gates, 4” Y Fitting, Two 10' Lengths of 4” Black Dust Hose, Ten 4” Hose Clamps, Tablesaw Dust Hood, & Universal Dust Hood – a value of $84.83 – 192650 Starter Kit (save $25!) $59.99

SEPARATOR LIDS

D BIG DUST HOOD

F JOINTER DUST HOODS

Small Dust Separator Lid Large Dust Separator Lid 4” Elbow

VAC & DUST HOSE STEP ADAPTERS Connect any tool vac port to any vacuum source. Two smaller units are flexible rubber, for linking shop vacs to hand tools. The Universal adapter’s rigid plastic steps will fit inside 6”, 5”, 4”, 3”, 2” or 1” hose. All 3 may be cut to fit.

921072 192605 192602

192629 6-3/4” x 24”

$8.99

192635 3” 192636 4”

$3.99 $4.99

192746 2-1/2” to 1-1/2” 192630 2-1/2” to 3” 192631 2-1/2” to 4”

$3.99 $3.99 $4.99

I SPLICE CONNECTORS J SHOP VAC ADAPTERS

K UNIVERSAL DUST PORTS

192632 4” x 3-5/8” $5.99 Flange to 2-1/2” Hose 192699 7-1/2” x 4-3/8” $6.99 Flange to 4” Hose $4.99 $4.99 L 2-1/2" TRIANGULAR DUST PORT $5.99 $5.99 192675 for homemade router table fences $7.99 $9.99 M 4” T CONNECTOR 192639 $7.99 N 4” COUPLING 192687 $7.99 $.79 O ABS REDUCERS $5.99 $.79 192652 5” to 4” $4.99 $.79 192660 4” to 3” $.79 P ABS ELBOWS $7.99 $.99 192633 3” $8.99 $.99 192634 4” $8.99 $.99 192604 4” Flange Q Y FITTINGS

R HOSE HANGERS

192626 8-1/4” x 8-1/4” (for 6”) $7.99 192670 2-1/2” 192627 8-1/2” x 10-1/4” (for 8”) $8.99 192671 3” G UNIVERSAL DUST HOOD 192648 4” 192628 6-1/4” x 6-1/4” $7.99

$23.99 $29.99 $8.99

Fein Adapter (7/8” to 1-1/4” dia.) $5.50 Medium Adapter (1” to 2-1/2” dia.) $5.99 Large Universal Adapter (1” to 6” dia.) $8.99

$279.99

H STATIONARY FLOOR SWEEP

$24.99 192637 3” 192638 4” E TABLESAW DUST HOOD 192625 12-1/4” x 12-1/4” $8.99 192674 4” x 2-1/2” 192606 16” x 13”

Make a Two Stage System The small lid fits a 5 gal. bucket & includes a 2-1/2” elbow. Use it to improve the performance of your shop vac. The large lid fits a 30 gal. metal garbage can and works with 1 to 2HP dust collectors. Add a 4” elbow (not included) on the inside of the lid inlet to help create a cyclonic flow inside the can, so that all but the very finest dust drops into the can.

192676 192664 192634

Ships within lower 48 states for $24 surcharge.

191079 Rikon 1HP Dust Collector

B BLAST GATES

E F

$319.99 $29.99

RIKON 1HP DUST COLLECTOR The compact platform size & convenient push-handle make this portable dust collector a breeze to wheel around the shop. The base is only 15” x 25-1/2”, & the upper bag stands 54” high. It comes with a 5 micron upper bag & a disposable clear plastic lower bag that has 2.1 cubic feet capacity. A 9” steel impeller attached to the 110V, 9 AMP motor delivers 650 CFM. 4” inlet port.

Sound level @3 ft. is < 78 dB. 66 lbs.

5 YEAR WARRANTY

$4.99 $6.99 $8.99 $.69 $.79 $.99

LONG RANGER™ REMOTE CONTROLS FOR DUST COLLECTORS If your shop is piped for dust collection, you probably get tired of crossing the room to turn the collector on & off. A Long Ranger control does it for you from up to 50’ away, (line of sight is not required). The 110V model handles motors up to 1-1/2HP; 220V model is for up to 2.5HP. Receivers include 5’ power cords. FCC approved RF transmitter has belt clip. Not for use with universal (router type) motors.

184951 184952 184953

110V Long Ranger Remote Control 220V Long Ranger Remote Control Extra Transmitter Unit

$76.99 $85.99 $29.99

“SHAKER FELT” MICRON FILTER BAGS These highly efficient bags are “toasted” on the inside, forming a singed surface that keeps dust particles from clogging the felt, & releases dust easily when shaken clean. The material filters out particles as small as 3 microns when new, or as fine as .1 microns when a moderate cake coats the felt.

192502 192503 192506

14” x 24” Polyester Micron Bag 20” x 32” Polyester Micron Bag Adjustable Steel Bag Clamp

$22.99 $29.99 $9.99

60 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

Dust Collection

TREND AIRSHIELDS

Woodturner’s like the comfort & protection these units provide when sanding on the lathe.

Airshield Pro “Favorite Choice” Fine Woodworking Dec. 2008 Trend’s Airshield personal respirators are a great defense against nuisance dust. A comfy low pressure seal about the sides of your face & chin coupled with a positive flow of freshly filtered air into the mask area keeps dust at bay.

The Standard Airshield has a 4 hour battery & room for a second optional battery to double the run time.

Airflow through the pre-filter & filter is 4.9 to 6.3 CFM. The Airshield Pro is ergonomically shaped with the onboard battery & motor sitting farther back on your head for greater comfort. An NI-MH battery runs up to 8 hours per charge. Airflow through the twin filters is 5.6 to 7 CFM. Both units include chargers & have adjustable headbands & a clear, low impact face shield that accepts replaceable scratch protective overlays.

301301 Trend Standard Airshield (1.6 lbs) $329.99 301302 Standard Filter $39.99 301303 Standard Filters (3 pack) $79.99 301304 Standard Pre-Filters (3 pack) $24.99 301305 Standard Visor Overlays (10 pack) $31.99 301306 4-Hr Battery (Standard) $43.99 301307 Woodturner’s Spares Pack (Standard) $99.99 (includes 1 filter, 3 pre-filters, 10 overlays & 1 face seal) 301311 Trend Airshield Pro (2.2 lbs.) $399.99 301312 Pro Filters (2 pack) $53.99 301313 Pro Visor Overlays (10 pack) $34.99

JDS AIR-TECH HP AIR FILTRATION UNIT

New improved high performance model captures dust missed by your dust collector.

This VS air cleaner moves up to 916 CFM through its ultra-fine filters, enough to filter the air in a 20’ x 30’ x 8’ shop over 11 times every hour. (That’s 916 CFM of filtered air.) A pleated pre-filter removes coarse dust at the intake, & the second stage industrial bag filter captures 99% of 5 micron particles (91% at 1 micron), removing dust, pollen & fungi. 1/3 HP, 3.9 AMP motor. 30” x 24” x 14” housing. 60 lbs. Includes 10 year life electrostatic filter & RF remote control with timer.

Air-Tech HP ships within lower 48 states for $28 surcharge.

116508 JDS Air-Tech Model HP $379.00

with Electrostatic Filter & Remote Control 2001PF Disposable Pre-Filter (HP & 750) $14.99 2003EF Electrostatic Pre-Filter std. (HP & 750) $59.99 2002BF Internal Bag Filter (HP & 750) $49.99 116509 Charcoal Filter (HP) $69.99 2004CF Charcoal Filter (750) $54.99 For larger air handlers, see our website.

NORTH CFR-1 DUST MASK & FILTERS This soft rubber, low-profile mask body is secured with a double elastic strap. An exhalation valve vents the warm, moist air you exhale downward, prolonging filter life & leaving glasses unfogged.

Replaceable filters offer excellent dust protection.

117001 117002 117003

CFR-1 Dust Mask & Filter (medium size) $19.99 Pack of 20 Filters (NIOSH rating N95) $22.99 CFR-1 Dust Mask with 21 Filters $35.99

ADVANTAGE 200 MASK Won’t fog your eye glasses!

The soft pliable rubber seal & flexible body 815444 Bare Advantage 200 Mask $16.99 of this mask fits comfortably. Sold without Advantage 200 Mask requires filters or cartridges. filters. Choose the filter medium to suit your Please select from below. needs: protection against nuisance dust or 818346 Pair of Dust Filters (NIOSH N95) $9.99 organic vapors like lacquer & paint fumes.

485024 Pair Organic Vapor Cartridges $24.99 FESTOOL MOBILE DUST EXTRACTORS Festool is serious about dust collection Festool dust extractors are at the center of the Festool system of tools. Happily, these vacs can also be connected to non-Festool power tools & are sure to beNow all Festool vacs have HEPA filtration down to .3 microns! come your favorite shop vacuum. All of Festool’s Model Dry/Wet Vol Min/Max db Depth x Width x Height Weight dust extractors offer high performance features like CT Mini 2/2.6 gal 62/72 17.5” x 13.5” x 16.5” 21 lbs HEPA filtration down to .3 microns, automatic toolCT Midi 3.3/3.9 gal 62/72 17.5” x 13.5” x 18.5” 21.4 lbs triggered activation & adjustable suction, on-board hose & cord storage, ergonomic center-mounted carCT 26E 6.3/6.9 gal 62/71 24.8” x 14.4” x 21.25” 28.7 lbs rying handle, foot actuated brake, an automatic waCT 36E 8.9/9.5 gal 62/71 24.8” x 14.4” x 23.4” 29.8 lbs ter level sensor in wet mode & a generous 24’ CT 48E 12.2/12.7 gal 62/71 28.1” x 15.4” x 39.5” 35.9 lbs long power cord. The Mini & Midi models give the highest degree of job-site portability, while the CT 26E, 36E & 48E have larger wheels & tank capacities. All models have 137 CFM, 96” static pressure & include a 1-1/16” x 11.5’ antistatic hose & a disposable, self-cleaning filter bag (the SELF-CLEANING FILTER BAGS (5 pack) collapsible bag design eliminates dust caking as the 722059 CT Mini Filter Bags $25.00 vac cycles off).

722060 CT Midi Filter Bags $30.00 721001 Festool CT Mini Vac $435.00 721079 Festool CT Midi Vac $485.00 721088 Festool CT 26E Vac $595.00 721087 Festool CT 36E Vac $645.00 722058 Festool CT 48E Vac $695.00 721007 Festool Compact Cleaning Set $85.00 (curved hand tube, 3 extension tubes, crevice & upholstery nozzles, floor nozzle w/ 3 interchangeable inserts & Systainer case)

721090 721089 722061 721074 721075

BAGS & FILTERS FOR FEIN VACS

CARTRIDGE FILTER KITS FOR FEIN VACS

171011 171015 171019 171013 95516 95517 T23000

Fein Turbo I Paper Filter Bags (3 pk) $16.99 Fein Turbo II Paper Filter Bags (3 pk) $16.99 Fein Turbo III Paper Filter Bags (3 pk) $19.99 Wet Filter (Turbo I, II, & III) $11.99 1 Micron Filter Cartridge (Turbo I, II, & III) $44.99 HEPA Filter Cartridge (Turbo I, II, & III) $119.99 Cartridge Mounting Hardware (I, II, & III) $10.99

721085 721093 721076

CT26E Filter Bags CT36E Filter Bags CT48E Filter Bags CT22E Filter Bags CT33E Filter Bags

$35.00 $40.00 $42.00 $35.00 $40.00

CT Mini/Midi Hepa Filter Element $60.00 CT 26, 36, 48 & 85 Hepa Main Filter $85.00 CT 22 & 23 Hepa Filter Element (2 pk) $65.00

Convert your Fein vac from the standard 5 Micron Filter Bladder to a 1 Micron Cartridge Filter.

Includes a 1 micron filter, internal mounting hardware & 1 paper dust bag.

171016 171018 171017

Fein Filter Bag Kit (Mini &Turbo I ) $56.99 Fein Filter Bag Kit (Turbo II ) $56.99 Fein Filter Bag Kit (Turbo III ) $64.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 61

Finishes MASTERPIECE WOOD FINISH

Chair builder & instructor Chuck Brock teamed up with coatings expert Curt Jarrell to formulate an oil/wax finish system designed to accentuate wood’s grain, color & texture so as to best enhance the natural beauty of your woodworking masterpieces. This three part oil/wax system includes everything you need, thus removing the guesswork in choosing compatible finishing oils, solvents & waxes.

Oil finishes are easy to use, not requiring any specialized equipment to apply & with adequate sanding prep & patience (let each coat fully dry before continuing) they will provide a gorgeous finish to your heirloom projects. The Masterpiece Wood Finish System gives you the simple pleasures of an oil-applied finish, with all the components conveniently packaged together. It's a perfect finish for interior pieces that typically will not come into contact with liquids. 475ml total finish, enough to cover approximately 45 sq. ft 190601

Masterpiece Wood Finish

CERAMITHANE

$29.99

the friendliest water-based topcoat for brush application we’ve tried Ceramithane is fortified with UV inhibitors to protect the vibrant colors of your wood or stain. It meets the standards of both the Kitchen Cabinet Manufacturer’s Association & the Maple Flooring Association, so you know the cured film is tough & stain-resistant.

The “matte flat” is the flattest water-based clear-coat we’ve seen, making it a perfect choice for protecting milk paint or other traditional flat finishes.

195234 195232 195230

Gloss Ceramithane (qt.) $25.99 Satin Ceramithane (qt.) $25.99 Matte Flat Ceramithane (qt.) $25.99

Hydrocote HYDROCOTE Resisthane Plus RESISTHANE PLUS rated “BEST VALUE” Our most popular Fine Woodworking water based spray finish for Nov. 2006 furniture & architectural trim.

Resisthane Plus goes on clear & won’t yellow or darken over time. Dries tack-free in 20 min. Recoat in 1 hr. It sands readily between coats, serving well as a self-seal-ing finish without needing a separate firstcoat sanding sealer. Approved by Kitchen Cabinet Manufacturer’s Association, whose standards define the best commercial finishes.

Coverage Quart Gallon 5 Gal. 400-500 sq. ft. per gal. $15.99 $36.99 $149.99 Satin Resisthane Plus 196070 196071 196072 Gloss Resisthane Plus 196073 196074 196075 196088 Brush & Gun Cleaner (qt.) $9.99 196089 Brush & Gun Cleaner (gal.) $29.99 196097 Fish-Eye Stop & Flow Ayd (1/2 pt.) $9.99 196039 Viscosity Cup $6.99 196099 Pack of 4 Straining Filters $1.19

HYDROCOTE WOOD PRE-SEAL Reduces grain raising from water based topcoats Compatible with virtually every kind of finish, Wood Pre-Seal is a good alternative to sanding sealers & is as an excellent pre-stain surface conditioner, sealing soft woods & leveling color absorption on problem species. It deepens & accentuates color much like an oil finish, but dries quickly. It is an effective tannin blocker.

Wood Pre-Seal 196094 Qt. $10.99 196095 Gal. $32.99

HYDROCOTE POLYURETHANE

Tough enough for gym floors, it meets or exceeds all specs of the National Maple Flooring Manufacturer's Association.

Hydrocote Polyurethane creates a very tough finish, resisting damage from water, alcohol or stains & spills even with prolonged exposure. It works well as a topcoat on most stains & finishes. It has a hint of the warm amber tone of oil-based polys, & yellows less over time.

Sand & re-coat in Polyurethane Qt. $18.99 Gal. $49.99 1 hour. Coverage Satin 196076 196077 500 sq. ft. per gal. Gloss

196079

196080

GENERAL FINISHES JEFF JEWITT LIKES THE LOOK ENDURO WATER-BASED LACQUER OF THESE WATER-BASED FINISHES. & ENDURO-VAR URETHANE Enduro-Var Urethane Water-Based Lacquer Qt. $29.99 Gal. $86.99 Gal. $44.99 Enduro-Var is a self-cross linking urethane that can be 132191 132963 brushed or sprayed. It has a nice warm amber tone, reminis- Satin 132190 132183 132957 cent of old time varnishes & cures to be exceptionally water- Gloss 132182 resistant. 2 - 4 hr. dry time. Coverage is 112 sq. ft. per gal. Formulated for spraying, the Water-Based Lacquer is an acrylic finish that dries fast & completely clear for a water & chemical resistance finish with lacquer-like depth & luster. Coverage is 150 sq. ft. per gal. Both finishes can be used over oil or water-based stains (we recommend a test first). Clean up with soap & water. (Also comes in flat & semi-gloss sheens. See our website.)

Shellac Clarity, depth & shine make Shellac one of the most

beautiful finishes in woodworking. Dewaxed shellacs are the professional’s choice for fine finishes & are recommended for use as a sealer or barrier coat beneath other finishes. A cured shellac finish is non-toxic, making it a perfect choice for toys & children’s furniture.

SEALCOAT™ DEWAXED SHELLAC

Ready to Use Universal Sealer Zinsser’s Bulls Eye® sealer is a 2-lb. cut of pure, clear, dewaxed shellac. An ideal sanding sealer, it bonds tenaciously to bare wood or finished surfaces; it dries quickly, sands smooth easily, & provides a reliable base for any top finish. For an excellent pre-stain surface conditioner, thin SealCoat 2 parts to 3 with denatured alcohol.

195831

SealCoat Dewaxed Shellac (qt.) $16.99

QUALASOLE FRENCH POLISH FINISH This user-friendly ready mixed shellac allows you to build up a finish faster & reduces the sticking & streaking that can occur when French polishing. It also can repair finishes that have worn or become crazed. It’s a pale, golden tone similar to blonde shellac.

195966 Qualasole French Polish Finish (16 oz.) $16.99

PREMIUM SHELLAC FLAKES Garnet shellac is a deep ruby/orange color, great for an antique look on cherry, mahogany & walnut.

Orange shellac’s amber tone complements any wood with natural reds, & warms blonde woods like old varnish. Beige shellac is a mild amber color.

Super Blonde has just a hint of amber, while Plantina is the clearest of all & being highly refined is slightly more water resistant.

195881 Garnet Dewaxed Shellac (1 lb.) $34.99 195882 Orange Dewaxed Shellac (1 lb.) $39.99 195883 Beige Dewaxed Shellac (1 lb.) $37.99 195884 Super Blonde Dewaxed Shellac (1 lb.) $39.99 195886 Plantina Dewaxed Shellac(1 lb.) $46.99 195885 Dewaxed Sampler Pack $39.99 (4 oz. flakes each of garnet, orange, beige & super blonde) (4 oz. flakes into 16 oz. alcohol = 2 lb. cut.)

Shellac Flakes are subject to market pricing conditions.

MYLANDS HIGH BUILD FRICTION POLISH A turner’s favorite, it polishes to a smooth, high-gloss finish A high solids content shellac finish designed for fast film build. It dries almost instantly, allowing immediate application of more coats.

197001 Mylands Friction Polish (1 pt.) $19.99

62 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

WATERLOX® ORIGINAL TRANSPARENT VARNISH Waterlox is an easily applied tung oil-based wiping varnish. Multiple coats create a tough surface film which resists scuffs & staining admirably. Repair is easy: sand out the damage & recoat! Dry overnight between coats. Clean up with mineral spirits. Approx. coverage 450 sq. ft. per gal.

195401 Original Sealer/Finish (1 qt.) $26.99 195402 Original Sealer/Finish (1 gal.) $64.99 195456 Original Satin (1 qt.) $37.99 195457 Original Satin (1 gal.) $89.99 195409 Original High Gloss (1 qt .) $34.99 195410 Original High Gloss (1 gal.) $89.99 195413 Original Marine Sealer (1 qt.) $26.99 195414 Original Marine Sealer (1 gal.) $62.99 195404 Original Marine High Gloss (1 qt.) $44.99 195416 Original Marine High Gloss (1 gal.) $114.99 195701 Lambswool Floor Finish Applicator $14.99 195702 Lambswool Replacement Pad $9.99 VOC restrictions prohibit Waterlox in gallons to be shipped to the following States: AZ, ,CA, CT, DE, D.C., IL, ME, MD, MA, NH, NJ, NY, OH, PA, RI, & northern Virginia

BEHLEN PURE TUNG OIL Mix pure tung oil with varnish & paint thinner to create your own oil/varnish finish.

Tung oil is clearer than boiled linseed oil & provides more water protection, but dries more slowly. Allow each coat to dry several days. For best results use a min. of 4 coats.

Pure Pint $16.99 Quart $26.99 Gallon $82.99 Tung Oil 195961 195962 195963 ITEMS FLAGGED WITH THIS SYMBOL CAN NOT BE SHIPPED BY AIR

MCCLOSKEY MARINE SPAR VARNISH The blend of alkyd & tung oil phenolic resins in this varnish will make a tough and flexible finish. The elastic “give” of cured varnish can withstand dull impacts & seasonal wood movement better than a standard polyurethane finish. UV absorbers help shield the wood from sun damage. Great for exterior wood doors. Recoat in 8-24 hours. Clean up with mineral spirits. Approx. coverage 75-100 sq. ft. per qt.

Satin Varnish Gloss Varnish

Quart $27.99 ea. Gallon $79.99 ea.

195912 195913 195922 195923

Finishes

WATCO DANISH OIL Proven reliability has made it our most popular oil finish for years

This wipeable penetrating finish has the combined properties of tung oil, linseed oil & other fortifying resins. Watco will deepen the tone of wood, especially reds or browns. Sand out damage & re-oil; the repair fades without a trace. Non-toxic when cured & safe for use on toys or food-contact surfaces.

Add two digits to the item number by selecting your color from the color list below (* not available in gallons) 1935__ Watco Danish Oil (pt.) $8.99 1936__ Watco Danish Oil (qt.) $12.99 1937__ Watco Danish Oil (gal.) $35.99 01 Natural 02 Golden Oak 03 Fruitwood 04 Cherry 05 Light Walnut 06 Medium Walnut 07 Dark Walnut 08 Black Walnut* 09 Red Mahogany* 193132 Watco Satin Wax (qt.) $12.99 193134 Watco Dark Satin Wax (qt.) $12.99 193135 Watco Rejuvenating Oil (qt.) $11.99 193141 Watco Exterior (qt.-Natural only) $13.99 193142 Watco Exterior (gal.-Natural only) $38.99 193128 Watco Teak Oil (qt.) $13.99 193136 Watco Teak Oil (gal.) $38.99

GENERAL FINISHES OIL-BASED GEL STAINS & GEL TOPCOAT General’s oil-based Urethane Gel Stains & Topcoat make coloring & finishing your interior furniture projects easy. Simply wipe on with a rag for a no-drip, fuss-free application. Gel Stains come in a rich array of wood-toned shades & can be intermixed for increased color options. Giving a hand rubbed finish sheen, these urethane fortified gels also provide extra protection against water & alcohol. Clean up with mineral spirits or waterless hand cleaner. Coverage is 200 sq. ft. per qt.

General Oil-Based Gel Stain American Oak Antique Walnut Brown Mahogany Candlelite Colonial Maple Georgian Cherry Golden Pine Java New Pine Nutmeg Prairie Wheat Gel Topcoat Satin

1/2 Pint $9.99 132701 132702 132703 132704 132705 132706 132707 132708 132709 132710 132711 132741

Quart $23.99 132901 132902 132903 132904 132905 132906 132907 132908 132909 132910 132911 132743

BEHLEN’S ROCKHARD TABLE TOP URETHANE VARNISH A hard, durable finish that dries quickly & polishes to a high shine New This “short oil” gloss varnish has a small per- Formula centage of tung oil mixed with phenolic resin.

Its amber tone adds considerable warmth to natural wood color. Interior use only. Clean up with mineral spirits.

197086 Rockhard Table Top Urethane Varnish (qt.) $23.99

Finishes for wooden bowls, cutting boards, butcher block & kitchen utensils.

While all of our interior finishes, once fully cured are food safe, 2 products we offer are labeled FDA compliant to standard 21 CFR 175.30; Watco Butcher Block Oil & Behlen’s Salad Bowl Finish. Both wipe on easily & have a low sheen with a slight amber tone. Wipe on multiple coats for more protection & a deeper sheen. Allow a min. of 72 hours drying time before food contact. Clean up with mineral spirits. Approx. coverage 440 sq. ft per pt.

WATCO BUTCHER BLOCK OIL MAHONEY FINISHES This is a true wiping varnish, (wipMade from heat-treated, pure California ing varnishes are a tad harder than oil/ walnut oil, Mahoney’s Utility Oil contains varnish blends when fully cured). no added driers or solvents. Because it cures, it will not go rancid or evaporate over time. Provides a 193144 Watco Butcher Block Oil (pt.) $15.99 close to the wood, low-sheen finish. Mahoney Oil Wax BEHLEN SALAD BOWL FINISH Finish is a honey-colored blend of heat-treated walnut Behlen’s SB finish is an oil/varnish blend. oil, beeswax & carnauba wax. Use alone or on top of the 195904 Salad Bowl Finish (pt.) $14.99 Walnut Utility oil to give wood a lustrous, warm finish.

195908

Salad Bowl Finish (qt.) $23.99

196911

Mahoney Walnut Utility Oil (16 oz.) $11.99

196914 Mahoney Oil Wax Finish (12 oz.) $14.99 BUTCHER BLOCK OIL Mineral oil is a popular choice for items intended for food use as it imparts little flavor or odor & will not go rancid. This Butcher Block Oil meets FDA regulations for food grade mineral oil & is thinner than standard mineral oil to aid in penetration. It helps seal wooden counter tops, bowls, cutting boards & utensils against stains & moisture. Since this is a noncuring oil, apply periodically to maintain protection. 196930 Butcher Block Oil (8 oz.) $7.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS 63

Coloring Wood DYE VS PIGMENT STAINS

In dye stains, colored chemicals are dissolved into a solvent carrier, breaking down into sub-microscopic particles that penetrate readily into individual wood fibers.

Since dyes put no solid material between you & the wood, they are justly famous for their striking clarity.

In pigment stains, finely ground colored particles settle onto the surface of the wood, lodging in pores, sanding scratches & the texture of the grain. Because they consist of solid particles, not chemical solutions, pigment stains generally resist fading very well. They’re your best choice for outdoor applications, or for use indoors where prolonged exposure to sunlight is expected.

OLD-FASHIONED MILK PAINT Milk paint was the original finish used on many styles of early American furniture, and is appropriate for any project where an earth-tone finish is desired. It’s a powder which you mix with water, & it dries flat with a rustic texture. A color chart shows all 16 colors, & 39 additional shades you can create. ExtraBond improves adhesion to surfaces other than bare wood.

MILK PAINT COLOR Salmon Driftwood Chocolate Brown Light Cream Barn Red Pumpkin Mustard Bayberry Lexington Green Soldier Blue Oyster White Pitch Black Sea Green Slate Buttermilk Federal Blue Salem Red Marigold Yellow Tavern Green Snow White

PINT $11.99 195373 195374 195375 195376 195321 195322 195323 195324 195325 195326 195327 195328 195329 195330 195331 195332 195316 195317 195318 195319

QUART $18.99 195377 195378 195379 195380 195341 195345 195346 195347 195338 195343 195348 195344 195349 195350 195342 195339 195340 195351 195352 195337

195333 Crackle Finish Base (pt.) $16.99 195335 Crackle Finish Base (qt.) $27.99 195370 Extra-Bond (pt.) $10.99 195371 Extra-Bond (qt.) $18.99 195334 Color Chart (free with order) $1.00

COLOR WHEELS

An Artist's Guide to Mixing Colors These color wheels will assist you in blending, matching & mixing primary colors to create tints, shades & tones.

195998 Artist's Color Wheel (9” dia.) $6.50 195987 Artist's Color Wheel (5” dia.) $3.50 General Water-Based Dye Stain Amber Blue Cinnamon Dark Brown Ebony Empire Red Green Light Brown Medium Brown Merlot Orange Vintage Cherry Yellow Dye Stain Reducer

Pint $11.99 132101 132102 132103 132104 132105 132106 132107 132108 132109 132110 132111 132112 132113 132114

Quart $17.50 132201 132202 132203 132204 132205 132206 132207 132208 132209 132210 132211 132212 132213 132214

SOLAR-LUX NGR STAINS Behlen's Solar-Lux Non-Grain-Raising stains dry as rapidly as alcohol dyes & have the color fastness of water dyes. Add them to lacquer to produce transparent toners, or use them alone. For hand application, use Retarder to prevent lap marks. 1 oz. per qt. of solvent.

195954 195953 196413 195956 196402 196403 195957 196404 195958 195959

Solar-Lux NGR Stain, (pt.)

Med. Brown Mahogany 196409 Med. Red Mahogany 196414 Light Red Mahogany 196406 Medium Walnut 196410 Nutmeg Brown 196411 Van Dyke Brown 195951 American Walnut 196412 Med. Wheat 196416 Solar-Lux Reducer (qt.)

Solar-Lux Retarder (pt.)

$13.99 Blood Red Golden Fruitwood Lemon Yellow Dark Green Sea Blue Jet Black Cherry Brown Maple $8.99 $11.99

ITEMS FLAGGED WITH THIS SYMBOL CAN NOT BE SHIPPED BY AIR

TRANSTINT CONCENTRATED WOOD DYES These very popular, versatile & convenient dye concentrates are soluble in both water & alcohol so they are compatible for use in water-based finishes, shellac & solvent lacquers. Use them to make your own water or alcohol dye-stains, for tinting finishes, or for coloring glues, fillers & glazes. While fade resistant, they are not for exterior use. 1 oz. per qt. of solvent.

2 OZ. TRANSTINT DYE CONCENTRATE $18.99 195718 Black 195707 Honey Amber 195719 Bright Green 195708 Golden Brown 195720 Orange 195709 Reddish Brown 195721 Blue 195710 Medium Brown 195722 Bordeaux 195711 Dark Walnut 195713 Dark Mission Br. 195723 Dark Vintage Maple 195704 Red Mahogany 195714 Cordovan 195715 Brown Mahogany 195724 Purple 195705 Amber 195716 Lemon Yellow 195717 Bright Red SEE COLOR CHARTS AT OUR WEBSITE, HIGHLANDWOODWORKING.COM

WOOD FINISHER'S COLOR WHEEL™ Shows you how to mix tinting colorants like Burnt Sienna, Raw Umber, Green, etc. to create custom woodtone stains & finishes.

195999

Wood Finisher's Color Wheel™

$15.99

GENERAL FINISHES WATER-BASED DYE STAINS General Finishes pre-mixed Water-Based Dye Stains let the color penetrate deeply into the wood, while allowing the wood’s grain & figure to show through. Compatible with General Water-Based Pint Quart all top coats, this dye has a small Wood Stain $11.99 $16.99 amount of acrylic binder that helps Antique Cherry 132401 132501 keep the color from migrating into 132402 132502 water-based topcoats. Create more Antique Oak 132403 132503 colors with the reducer or add dye Black Black Cherry 132404 132504 into water-based finishes to make 132405 132505 toners. Dry time 2-4 hours. Cover- Brown Mahogany Country Pine 132406 132506 age is 150 sq. ft. per qt.

GENERAL FINISHES WATER-BASED WOOD STAINS These are a blend of pigmented stain & dye formulated as a heavy bodied, high solids wood colorant with a small amount of acrylic binder to help lock down the color. They are low in VOC’s, dry fast and are compatible under water-based and oil-based finishes. Use the Natural as an extender to lighten colors. Coverage is 150 sq. ft. per qt.

Cranberry Red Early American Expresso Golden Oak Pecan Rosewood Shaker Maple Walnut Whitewash Natural (Pre-Stain Conditioner)

132407 132408 132409 132410 132412 132413 132414 132415 132416 132411

132507 132508 132509 132510 132512 132513 132514 132515 132516 132511

64 SEE OUR LINE OF VARATHANE PREMIUM GEL WOOD STAINS ON OUR WEBSITE

100 gm (3.5 oz.) $15.99

ARTI DYES

1000 gm (2.2lbs) $109.99

196053 196044 196045 196043 196048 196055 196046 196056 196058 196049 196054 196057 196047 196041 196050 196040 196051 196042 196052 196059

Light Pear #1843 Dark Pear #1836 Cherry #1832 Light Oak #106 Dark Oak #107 Light Walnut #486 Red Walnut #1845 Medium Walnut #547 Dark Walnut #101 Antique Walnut #100 Light Mahogany #103 Dark Mahogany #104 Rosewood #102 Red #129 Orange #128 Yellow #1150 Green #124 Dark Blue #138 Grey #118 Deep Black #134

196153 196144 196145 196143 196148 196155 196146 196156 196158 196149 196154 196157 196147 196141 196150 196140 196151 196142 196152 196159

196066 196063 196067

Walnut #1611 Mahogany #1604 Dark Brown #1612

196166 196163 196167

ARTICIDOL DYES for most woods

Coloring Wood

ARTI DYES Arti water soluble wood dyes offer outstanding clarity, color variety & value. As a dry powder, they mix easily into hot water. Average concentration level is about 30 grams per liter of water (black is 100g per liter, & lighter colors need only 10g of powder per liter). Mix up only what your job requires. Dry powder has a shelf life of several years. Colors can be mixed & concentration levels varied to create custom hues. Arti dyes are colorfast unless subject to prolong exposure to sunlight.

Because water is the solvent for these dyes, using water-based finishes over them would first require a seal coat of de-waxed shellac.

Articidol dyes work with all woods. Artiporin dyes are formulated to aid in even color dispersal on open-pored woods like oak & ash. View a color chart of all our Arti dyes on our website.

To get acquainted with Arti dyes, order the 10-color Articidol assortment which makes 1/2 pint each of red, blue, green, gray, yellow, orange, cherry, light oak, light walnut & medium walnut.

196004

Arti Dye 10-Color Assortment

ARTI TOYMAKER’S DYES These safe, non-toxic dyes offer eight bright, clear colors suitable for use on children’s toys and furniture. They come ARTIPORIN DYES for open-pored woods in dry powder form for mixing 196060 Teak #1601 196160 with water, (except for black, 196064 Light Oak #1605 196164 which is ready-mixed). Seal 196061 Medium Oak #1602 196161 over the dye with shellac or a 196062 Dark Oak #1603 196162 salad bowl/butcher block type 196065 Medium Walnut #1610 196165 finish, (see page 63).

$19.99

100 gm ARTI 1000 gm (3.5 oz.) TOYMAKER’S (2.2lbs) $17.99 DYES $129.99 196105 Bright Red #786 196305 196111 Dark Red #794 196311 196109 Orange # 792 196309 196107 Yellow # 791 196307 196108 Green # 788 196308 196106 Blue # 787 196306 196110 Brown # 790 196310

196009 Arti Toy Dye 7 Color Asst. (makes 1/2 pint of each color) $19.99 196007 Black Toy Dye (1/2 pt.) $12.99 196008 Black Toy Dye (liter) $36.99

DIGITAL DYEMAKER’S SCALE Accurately weigh powdered dyes & shellac flakes with confidence & conserve by mixing only what you need for the job. Max. capacity 2000g (4.4 lbs.)

Convenient tare & auto shut off features. Includes 5 cup plastic bowl. Uses 4 AA batteries (not included).

BEHLEN DRY PIGMENT FURNITURE POWDERS Behlen Furniture Powders are finely ground pigments formulated to achieve quick & permanent spot repairs on most types & shades of wood finishes. They mix readily into many finishes including enamel, shellac, lacquer, varnish, oils & waterbased acrylics. Intermix colors for a perfect match.

UNIVERSAL TINTING COLORANTS These versatile UTCs (finely ground pigments in a soft fluid base), can be used to tint or shade practically any finishing materials from oils & varnishes to fillers & waxes to water-based stains.

Behlen Dry Pigment Furniture Powders 194883 194874 Medium Yellow 194884 194875 Dark Green 194885 194876 Ultramarine Blue 194886 194878 Van Dyke Brown 194879 Extra Dark Walnut 194887 194888 194880 Mahogany 194889 194882 Cherry

8742025

194901 194903

196320 196321 196322 196323 196324 196325 196326 196328 196329 196331 196332 196333 196334 196335 196336 196337

2000 Gram Digital Scale

$24.99

UTC 12-Color Assortment $36.99 (includes color chart & colors listed in red) UTC Color Chart & Mixing Guide $1.00

UTC 1-1/2 oz. Tube $3.69 Flake White 196338 New Rose Light Yellow 196339 Rose Lake Medium Yellow 196340 Lavender Yellow Orange 196341 Spring Green Yellow Ochre 196342 Mint Gold 196343 Avocado Raw Sienna 196344 Light Green Sandalwood 196345 Medium Green Burnt Umber 196346 Dark Green Van Dyke Brown 196347 Phthalo Green Raw Umber 196348 Sea Blue Green Burnt Sienna 196349 Ultramarine Blue Venetian Red 196350 Cobalt Blue Tangerine 196351 Prussian Blue American Vermilion 196352 Gray Bulletin Red 196353 Lamp Black

UTC DISPENSER PUMP/GLUE SYRINGE 3/4 oz./20cc graduated pumps.

Includes 2 long metal tips & 2 caps.

166024

UTC Pump/Syringe

$4.50

$7.50 ea. (1 oz.)

White Black Burnt Umber Raw Umber Burnt Sienna Raw Sienna Venetian Red

PAINTER’S PYRAMIDS The pyramid form of these 2” high supports provides a stable base & a non-marring contact point as they hold your work for applying stains & finishes. With your projects elevated off the work surface, you’re able to get perfect coverage on all sides & edges without having to reposition your piece. Small side tabs let you screw them securely to a flat surface. Pyramids stack for easy storage.

Vera Spin Turntables spin on ball bearings so you can rotate your project as you work. The platter has small raised studs that accept the Painter’s Pyramids in any arrangement. Turntables also accept Grabbers - flat 2” triangles with a hard rubber texture, non-slip face.

160201 160204

160205

160207

Painter’s Pyramid 10 Pack $5.99 11” Vera Spin 360 - supports 25 lbs. $24.99 (includes 4 pyramids & 4 grabbers) 16” Vera Spin 360 - supports 100 lbs. $34.99 (includes 8 pyramids & 8 grabbers) Grabbers 4 Pack $4.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 65

Polishes, Waxes & Fillers PUMICE & ROTTENSTONE Powdered abrasives for use on all kinds of cured finishes

Pumice (4F, extra fine), polishes final finish coats to a semi-gloss sheen after they have been scraped or sanded flat & smooth. Ultrafine Rottenstone rubs up a high gloss. Use with a rubbing lubricant like mineral oil.

195001 4F Pumice (1 lb.) $6.50 195002 Rottenstone (1 lb.) $6.50

SHELLAWAX Australian finishes made for lathe work This shellac-based friction polish uses the heat generated from the friction of your pad on spinning wood to set the shellac. Sand your project to 400X & apply a quick even coat of the wax. Turn on the lathe & buff up the shine. Shellawax Cream gives a soft, less than wet, gloss shine. Shellawax Liquid gives a brighter shine & dries faster than the cream.

For the ultimate brilliance & protection, sand your project to 600X, & apply the abrasive wax, EEE Ultra Shine. Buff it off, & apply a topcoat of Shellawax.

197031 197032 197033 197034

Shellawax Cream Friction Polish 300ml $39.99 Shellawax Liquid Friction Polish 30ml $5.99 Shellawax Liquid Friction Polish 250ml $29.99 EEE-Ultra Shine Polishing Wax 250ml $22.99

PURE BULK CARNAUBA & BEESWAX Beeswax gives a soft, low-sheen polish, & Carnauba wax is the hardest vegetable wax, polishing to a higher sheen. Both waxes can be blended together or with oil/varnish to make custom finishes & are softened with turpentine.

Beeswax melts at 145°F & Carnauba melts at 185° F. Go to the Library tab on our website to see our user’s guide on making your own wax.

196304 Beeswax Block (4 oz.) $5.99 196298 Beeswax Block (1 lb.) $12.99 196301 Beeswax Granulated Pack (16 oz.) $11.99 196302 Carnauba Wax Flakes (1/4 lb.) $6.50 196303 Carnauba Wax Flakes (1 lb.) $19.99

MEGUIAR’S MIRROR GLAZE® POLISHES Meguiar’s compounds simplify rubbing out a finish. Let the finish fully cure, the longer the better. Fine sand to at least 600X. Start with the Fine-Cut Cleaner & then use the Swirl Remover.

For a wet-shine, gloss finish use the Show Car Glaze.

Final Inspection removes buffing residue & its’ optical brighteners will bring forth a showroom shine.

Apply by hand, a R.O. sander or rotary buffer.

195895 195896 195897 195898 197023

Meguiar’s Fine-Cut Cleaner (16 oz.) $10.99 Meguiar’s Swirl Remover (16 oz.) $11.99 Meguiar’s Show Car Glaze (16 oz.) $10.99 Meguiar’s Final Inspection $6.99 4-1/2” Terry Hand Applicator Pads (2 pk) $2.49

RENAISSANCE WAX Developed in association with the British Museum for restoration & protection of art treasures, this superb micro-crystalline cleaner/polish is ideal for use in the shop. It’s our all-time favorite coating for reducing friction, preventing rust & corrosion, & putting a shine on anything that needs it. It lasts so long & works so well that even the most frugal woodworker will find it a genuine value. On furniture, Renaissance will be the toughest wax you’ve ever used. Used on tools & jigs it will polish metal smoother & smoother with every use—after a few years your jointer beds & plane soles will be as smooth as glass.

195301

Renaissance Wax (1/2 lb.) $24.99

MYLANDS CLEAR FINISHING WAX

A reputation for excellence among woodturners.

Mylands lends itself beautifully to polishing turned objects on the lathe, & it offers the same simple application, deep luster & durability on furniture, carvings & paneling. Formulated over 100 years ago for furniture conservators & restorers, it combines beeswax, carnauba & shellac wax in a toluene-free base.

197004

Mylands Wax (1 lb.)

$14.99

STAPLES PASTE WAX Staples paste wax contains a high percentage of carnauba wax, the hardest of the natural waxes. It won’t smudge or leave fingerprints like beeswax or paraffin. This paste wax makes a silicon free coating for furniture & your cast-iron tool tops & works well as a lubricant for rubbing out a finish. (Dark Brown has a reddish hue.)

194151 194152

Staples Clear Paste Wax (1 lb.)

Staples Dark Brown Wax (1 lb.)

$12.50 $12.50

BRIWAX FURNITURE WAX A popular choice here at the store, Briwax is recommended for cleaning, rejuvenating and polishing old finishes—it's a favorite of antique shops & repair specialists. It is a blend of beeswax & carnauba with a toluene solvent; the solvent helps clean & even partially re-amalgamate old lacquer & shellac finishes.

194970 194971 194972 194973

Can of Briwax (1 lb.)

Clear Golden Oak Antique Mahogany Light Brown

$17.99 each 194974 Dark Brown 194975 Rustic Pine 194976 Tudor Brown 194977 Ebony

SOFTWAX Wax sticks make touch ups & repairs to finished surfaces quick & easy. 20 colors, (which can be mixed), a wax wedge & buffing pad all in a handy case.

167241

SoftWax Kit

$26.99

BEALL WOOD BUFF

Highly recommended as an easy way to apply a beautiful, non-toxic finish to your turned wooden bowls.

Once your project is sanded to at least 220X, you can immediately buff on a finish, without having to wait for messy, smelly coatings to cure.

Beall’s Buffing Wheels are made with a soft, loosely bound cloth which conforms to the contours of wood without blurring the 105611 Beall Wood Buff Kit $69.99 (three 8” wheels, Combo Adaptor & 3 Buffing Compounds) detail. 8” wheels have threaded hubs & each type is 1/2” & 5/8” Combo Adaptor $17.99 made from a specific cloth that works in conjunction 105620 Extension for Combo Adaptor $16.99 with 1 of the 3 buffing compounds (Tripoli, White 105626 Beall #1 Morse Taper Adaptor $12.99 Diamond & Carnauba wax). The Wood Buff Kit has a 105646 Beall #2 Morse Taper Adaptor $12.99 Combo Adaptor shaft that attaches to the 1/2” or 5/8” 105647 105627 2” Bowl Buffs (set of 3) $44.99 shaft of a stationary motor (1725 RPM recommended) 105628 3” Bowl Buffs (set of 3) $44.99 so you can quickly change buffing wheels. Use Beall 105629 4” Bowl Buffs (set of 3) $49.99 Adaptors to mount the Combo Adaptor on your lathe. 105621 Tripoli Buffing Compound $4.50 Round Bowl Buffs thread onto the Combo Adaptor & 105622 White Diamond Buffing Compound $5.99 are perfect for buffing bowls & other hollow objects.

105623 Carnauba Buffing Compound $7.99

66 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

BEHLEN PASTE WOOD FILLER Use Behlen’s spirit-based paste wood fillers to handle the open grain on wood’s surface to make it easy for your finish coatings to lay out level. Use straight from the can, just wipe off the excess after 3-5 minutes. Use Natural on woods like birch/oak. Use Mahogany on cherry/mahogany wood. Medium Walnut is for walnut, rosewood & other dark species. Can be tinted with UTC’s.

The grain filler/spreader’s stiff rubber edge forces filler into pores.

Behlen’s Pore-O-Pac Quart $24.99 each Natural 195968 Mahogany 195974 Med. Walnut 195975 195992 Grain Filler Spreader (5” long) $4.99

FAMOWOOD® SOLVENT-FREE FILLER

Water-Based Putty for Repairs & Surface Filling

Right out of the jar, Famowood fills in nail holes, dents & cracks in furniture & flooring. Dries in 15 minutes with almost no shrinkage. Thinned with water to the consistency of ketchup, use Famowood as a surface filler, leveling pores & hiding texture. Fully compatible with most water & solvent based stains & finishes.

Mix colors for custom shades or tint with UTC’s.

Color 1/4 Pint $3.75 each Pint $7.50 each Birch 195841 195851 Fir/Maple 195842 195852 Golden Oak 195843 195853 Mahogany/Cherry 195844 195854 Natural 195845 195855 Red Oak 195846 195856 Walnut 195847 195857 White 195848 195858 195860 8-pc Famowood Sampler (1/4 pt. ea) $26.99 ITEMS FLAGGED WITH THIS SYMBOL CAN NOT BE SHIPPED BY AIR

SPRAY FINISHING MADE SIMPLE Book & DVD By Jeff Jewitt Using a multimedia approach of detailed instructions, photos & videos, Jeff 25% OFF demystifies spray finishing & shows you how to troubleshoot & solve spraying problems. 128 pages. Paperback. 55 min. DVD. 203279

Spray Finishing Made Simple $18.72 $24.95

VISCOSITY CUP The viscosity (thickness) of a finish can change in response to changes in temperature, humidity, & atmospheric pressure. This simple tool lets you measure how a finish is affected on a given day, so you can thin or modify it as needed for optimal spraying results. This cup is based on the #4 Ford cup style.

196039

Viscosity Cup

$6.99

MASTER SPRAY GUN CLEANING KIT

This kit has every tool you’ll ever need for cleaning & maintaining every spray gun you own, including HVLP, compressed air, detail & touch-up guns.

It has a 7 piece stainless steel needle set with 5” handle; an angled dentist’s pick for pulling O-rings & packings; 3/16” & 1/4” end brushes with handle; a 5” long, 1/2” straight body brush; 1-1/4” to 3/4” tapered body cavity brush; 1/4” HVLP brush; 12” x 3/8” nylon pickup tube brush; 8” x 3/8” brass power pickup tube brush; 5 piece precision mini/micro brush set; a stiff general-purpose nylon scrub brush; & a 1/2 oz. bottle of non-petroleum Spray Gun Lube. If this kit can’t get your spray gun clean, it’s time for a new gun!

116151 Master 2000 Spray Gun Cleaning Kit $42.99

Spray Finishing

EARLEX 5500 HVLP SPRAY GUN

Get the benefits of HVLP (high volume/low pressure) turbine powered technology, with its’ excellent material transfer efficiency & minimal overspray – All at an attractive price!

This bleeder style spray gun with a 2.0mm stainless-steel fluid tip & needle will apply clear water-based coatings with ease. The gun’s constant air stream atomizes your material instantly as you pull the trigger creating flawless, sprayed finishes. A single adjustment knob precisely controls material flow. A spring mechanism changes the spray pattern from horizontal, vertical or round & can even be adjusted while spraying. A generous quart cup is pressurized by the turbine for consistent material delivery and its’ Teflon lining makes clean up easy.

The compact turbine caddy (12” x 12”) has a 25” high fixed handle & neatly accommodates the 1” dia. x 13’ hose and spray gun. Other needle and tip options are available for spraying thinned latex paint or light viscosity materials like shellac, solvent stains & lacquers.

192935 Earlex 5500 HVLP Spray System $339.99 Includes FREE 1.5mm tip & needle kit, while supplies last!

Tip & Needle Kits for Earlex 5000, 5500 & 6900 $39.99 ea.

192908 1.0mm 192909 1.5mm 192910 2.0mm (std.)

192911 2.5mm

CRITTER SPRAY GUN

The simplicity of this spray gun belies its excellent performance

To spray this pint-sized gun, simply set air pressure & adjust the nozzle. The siphon gun design pulls material from the standard 16 oz. Mason jar & provides a circular spray pattern from 1/2” to 3-1/2”.

The Critter is ideal for small to medium projects & is a snap to clean, allowing any unused finish to be stored in the jar. Min. compressor requirements are 3/4 HP delivering 3 cfm @ 90 psi. Some finishes will need thinning prior to spraying. Includes a 16 oz. glass Mason jar, jar gasket & instructions.

192701 192719 192720

192721 192710 192722

Critter Spray Gun Critter Maintenance Kit Critter Maintenance Kit with Stainless Steel Tube Critter Air Valve Repair Kit Pack of 5 Critter Jar Gaskets Critter Replacement Pint Jar

$49.99 $16.99 $18.99

$16.99 $6.99 $1.49

SHOP FOX HVLP SPRAY GUN This bargain-priced HVLP conversion gun is gravity fed, has a 20 oz. cup & a nicely machined, chrome-plated brass air horn usually found on more expensive guns. The non-bleeding gun won’t strain your compressor when not spraying & has an in-line air regulator for close at hand air adjustments (your compressor should supply 6cfm at 40 psi). It includes a cleaning brush, disassembly tools, a spare washable internal fluid filter, & a 1.5 mm tip works for handling thin & medium-bodied finishes. Air hose fitting not included.

173274

Shop Fox HVLP Spray Gun

$59.99

GRAVITY SPRAY GUN HOLDER You may never knock your gun over again!

If you love the feel & balance of your gravity spray gun, but find it frustrating to rest or fill it, then you’ll love our spray gun holder. It holds almost all gravity fed spray guns (cup on top) & has a removable filter holder for straining finishes directly into the cup. Holder can be easily screwed to either a wall or table surface.

152393 Gravity Spray Gun Holder $6.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 67

Finishing Supplies

BLO2XYGEN™ FINISH PRESERVER

If you’re like most woodworkers, you’ve probably thrown out a lot of oil based finish because it hardened in the can.

Oxygen stored with your leftover finish is what makes the product go bad.

Bloxygen™ lays down a blanket of heavier-than-air inert gas that blocks oxygen from reaching the finish, so even sensitive tung oil finish can last for years in a tightly sealed container.

195005

Bloxygen™ Finish Preserver

$9.99

LIBERON STEEL WOOL Liberon steel wool is smoother, softer, more consistent & more durable than any other brand we’ve tried. The 4/0 grade, (equivalent of extra fine 400 to 600X sandpaper), does a superb job of rubbing out new finishes, cleaning & polishing old ones, & applying wax. Each sleeve has 1 continuous roll.

195555 Liberon 4/0 Steel Wool (100 gm.) $9.99 195556 Liberon 4/0 Steel Wool (250 gm.) $14.99 195554 Liberon 4/0 Steel Wool (1000 gm.) $44.99 8-roll sleeve of ordinary 4/0 steel wool weighs ~ 225 grams.

THE HIGHLAND FINISHING CLOTH

Exclusively at Highland Woodworking This pre-washed, lint-free, 4-ply, 10” x 10” all cotton pad with tucked & sewn edges gives the cleanest, smoothest finishing possible. They lay down oils, stains or gels, flowing on thin even coats that dry rapidly. They load well, letting you cover large areas at one go, & remove excess material. A hang-up loop lets them dry safely.

195833 Pack of 10 Highland Finishing Cloths $6.99

NORTON RED DRY TACK CLOTH Norton’s lint-free dry tack cloth has a unique split-fiber surface that is perfect for dusting between coats of water or oil-based finishes. They can be washed & reused hundreds of times without losing their performance. Excellent for general dusting too!

156728

Norton Red Dry Tack Cloth (16” x 16”) $4.99

196211A 196211

TACK CLOTHS Guaranteed not to dry out Non-toxic, wax & silicone free, sticky sanding accessories great for removing fine dust & debris in preparation for finishing. Use with paint, varnish, oil & shellac. Not for water based finishes.

Tack Cloth (18" x 36") $.99 5-pack Tack Cloths $4.50

SCRAPERITE BLADES

Plastic razor blades scrape grime, glue & shop gunk without damaging your tools & projects.

ScrapeRite General Purpose Blades ScrapeRite Rigid Blades

Scotch-Brite™ Hand Pads Coarse Medium Fine Single Pad $1.75 196201 196202 196203 Box of 20 Pads $25.99 196209C 196209M 196209F 196204 3 Pad Assortment (C, M, F) $4.50 196206 Single Extra Coarse Pad $3.99 196207 Box of 10 Extra Coarse Pads $35.99 196205 Hand Pad Holder $23.99

SPATULA SET Great for finishing & refinishing These 5 variously shaped spatulas are ideal for applying wood putty, cleaning up glue squeeze-out and for spreading glues & epoxies. The wooden handled trowels are 9” OAL. The longest blade is 3-3/4”; the shortest is 1-1/4”. Each steel blade has a different degree of flexibility.

173168

$6.99 $6.99

LIBERON RING REMOVER Use a rag to apply this liquid ring remover, rubbing in small circles around the blemish until it’s gone. Let dry and buff with a clean cloth.

195557 Liberon Ring Remover (6 oz.) $19.99

NOTE: REPAIRED AREAS WILL BE HIGH-GLOSS & MAY NEED SOME RUBBING OUT TO MATCH THE SURROUNDING AREA.

Set of 5 Spatulas

$11.99

HAND APPLIED FINISHES, DVD Jeff Jewitt We recommend this DVD for an informative primer for all woodworkers learning to work with color when finishing.

220217

Hand Applied Finishes

$19.95

FELT RUBBING BLOCK This traditional solid felt block is used with rubbing & polishing compounds for the smoothest & most uniform job of finishing fine finishes. Its’ firm surface cuts away superficial imperfections better than a soft rag, & avoids dubbing over & cutting through edges.

195978 Felt Rubbing Block (4” x 2” x 1” thick) $10.99

SHOP RAGS Ideal for finishing, waxing & staining.

195993 196000

Shop Rags (1 lb.) $4.50 Shop Rags (4 lbs.) $16.99

TIBET ALMOND STICK Wipe this polish soaked cotton stick over a scratch on finished wood & almost instantly, the defect fades away. Stored in its wrap & metal can, the stick should last for years. Not for gouges, deep scratches or bleached finishes.

179204

Safer than steel razor blades, these plastic edges are sharp enough to remove dried paint & glue dribble.

General-Purpose Blades flex slightly, conforming to curved windshields & tool handles. Rigid Blades are for hard, flat surfaces. Includes holder & 25 blades.

188351 188352

3M SCOTCH-BRITE™ HAND PADS These 6” x 9” flexible pads are non-woven nylon impregnated with abrasive minerals, making them much more durable than steel wool.

They don’t shed fragments or leave oils behind, will not rust, & they can be washed & re-used. Extra Coarse pads are similar to grade 4 steel wool. Coarse pads are fairly aggressive. Medium pads are equivalent to 0 or 00 steel wool. Fine pads are similar to 4/0 steel wool.

Use our Hand Pad Holder for the smoothest job on flat surfaces. Pads can be attached or removed instantly, with no hardware to mar your surface.

Tibet Almond Stick

$3.99

24-PIECE FOAM BRUSH PACK This is the best foam brush we’ve ever used. The dense foam head (with internal stiffener) is attached to a 5/8” x 4-1/2” hardwood handle. They work great for oil & latex paint, stain, varnish & water-based finishes. Not for shellac or lacquer.

160091 Jen Poly-Brush® Foam Brushes (24 pk) $8.99

WHITE RING REMOVER CLOTH Simply rub this liquid soaked cloth over and around white water & heat marks on your finish until the blemish is gone. Contains approx. .3 oz – enough for several applications.

Comes in a re-sealable bag. Not for use on polyurethane.

188321

White Ring Remover Cloth

$6.99

68 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Rust Prevention & Lubrication

ZERUST Corrosion Protection Zerust protects metal against rust & corrosion by releasing an invisible, non-toxic, non-reactive, & odorless corrosion-inhibiting vapor. Zerust products are completely safe. They leave no residue, cause no changes in the metal they are protecting & are safe for use with kitchen equipment & foodware (meet FDA guidelines).

For your tool chest & drawers, cut to fit the non-slip drawer liners. Cover & liners will protect for 5 years. A small vapor capsule sticks to the lid of a tool box & protects up to a 2’ radius for one year.

195293 195291 195292 195294

Zerust Table Saw Cover (63” x 45” x 19”) $59.99 Zerust 12” x 72” Non-Slip Liner $8.99 Zerust 22-1/2” x 118” Non-Slip Liner $14.99 Zerust VC2-1 Vapor Capsule $6.99

BULL FROG Rustproofers Bull Frog vapor corrosion inhibitors (VCIs) are waterbased non-polluting molecular coatings that protect metals in enclosed spaces for a year or more at a time. The VCIs bond electrochemically to metal surfaces. Bull Frog VCI emitters come in packs of 6 self-adhesive 3” strips, each of which protects up to 1 cubic foot; single cups for up to 11 ft.3 & 10” shields for up to 400 ft.3 (7’ x 7’ room).

491016 491112 491321

Pack of 6 Bull Frog Strips Bull Frog Emitter Cup Bull Frog Rust Blocker Shield

$11.99 $11.99 $15.99

HIGHLAND PLANE SACKS™ & SAW COVERS These protective fabric slip covers are treated with a hydrophobic silicone chemical that helps keep the blades on your fine tools from rusting. Saw covers have a 431010 7-1/2” Plane Sack (fits block planes) $8.49 protective tough duck-canvas exterior 431011 12-1/2” Plane Sack (fits No. 3 to 4-1/2 smooth planes) $8.99 with a 431012 16” Plane Sack (fits No. 5 & 6 bench planes) $9.50 431013 25” Plane Sack (fits No. 7 & 8 jointer planes) $9.99 velcro strap.

431016 Sack-Ups 9” Blade Length Dovetail Saw Cover $22.99 431017 Sack-Ups 12” Blade Length Dovetail Saw Cover

GLIDECOTE formerly called Topcote Glidecote® is a high-tech teflon-like coating for cast-iron table surfaces that contains no oils or silicones, won't stain wood or cause finishing problems. It leaves a dry, micro-thin coating to seal out water vapor. ®

485317 Glidecote® (10.75 oz.) $17.99

BLADECOTE® formerly called Dricote Bladecote® significantly slows accumulation of baked-on resins & crud that increase friction, inhibit chip clearance, & dull cutting edges.

485315 Bladecote® (10.75 oz.)

RUST ERASERS Silicon carbide abrasive mixed throughout each rubbery Rust Eraser block quickly scrubs rust, corrosion or tarnish off any metal & leaves a beautiful polish. The resilient consistency of the 3” x 2” x 3/4” blocks lets them mold themselves to fit contoured surfaces, & cushions so that even 60X won't cause deep scratches. These are the fastest, most cost effective hand tools we know of for eliminating rust & stains on tools, rules, clamps & hardware.

485354 485351 485352 485353

SILICA GEL CANISTER Prevent tools from rusting by removing moisture from air in toolboxes & drawers An indicator window shows when the canister is saturated. Heat the canister in the oven to reactivate the desiccant. 40 gram aluminum container protects up to 3 cubic feet of enclosed space.

750 gram steel container protects up to 57 cubic feet of enclosed space.

185123 185126

$17.99

485316

485308 485318

Boeshield T-9 (4 oz. ) $9.99 Boeshield T-9 (12 oz. ) $17.99

PG2000 LUBRICANT SPRAY Developed for the grueling, grimy conditions of off-road bicycle racing, this generalpurpose lubricant is a crossover hit in the woodshop. Silicone-free PG2000 penetrates built-up gunk, dirt and rust, lubricates metal surfaces, & doesn’t attract sawdust.

185142

PG2000 Lubricant Pump (16 oz.) $13.99

NEVR-DULL POLISH removes rust & corrosion on metal surfaces while it cleans & polishes Simply tear off a small portion of the Nevr-Dull wadding & rub the surface until all the rust, dirt & corrosion is gone. Wipe with a soft, dry cloth for a lasting luster. Not for use on lacquered surfaces.

Nevr-Dull Wadding Polish (5 oz. jar)

$4.99

CAMELLIA OIL Traditional Tool Treatment This light, odorless, non-staining oil prevents corrosion, helps ease chisels & knives through their work & won’t affect glue-up. A light wipe on your steel tools will keep them shiny clean & rust free.

456460 456465

BEARINGLUBRICANT® (5.5 oz.) $13.99 ITEMS FLAGGED WITH THIS SYMBOL CAN NOT BE SHIPPED BY AIR

BOESHIELD T-9 Great for long term storage Boeshield coats & protects steel, aluminum & other metals. It penetrates the metal’s surface, displacing any moisture present & drying to a waxy waterproof film.

RUST FREE Rust Free works to remove surface rust & light to moderate scale from iron surfaces. It won't harm your tools, so severe cases can be soaked overnight. Rinses clean with water.

8600973

40g Silica Gel Canister (2” x 4” x 1/2”) $6.50 750g Silica Gel Canister (4” x 6”) $35.99

BEARINGLUBRICANT® BEARINGLUBRICANT® is a high-temperatureresistant thin film coating that prevents corrosion & dirt accumulation while greatly extending the life of all your bearings.

Set of all 3 Rust Erasers $15.99 Coarse Rust Eraser (60X) $6.99 Medium Rust Eraser (120X) $6.99 Fine Rust Eraser (240X) $6.99

485307 Rust Free (8.5 oz.) $11.99

$28.99

Camellia Oil 100 ml (3.3 oz.) $8.99 Camellia Oil Spray 240 ml (8 oz.) $15.99

CMT 2050 BLADE & BIT CLEANER This non-toxic, non-caustic cleaner loosens even the hardest baked-on encrustations on your router bits, saw blades & other cutting tools. Just wipe the tool clean, leaving a thin film that protects against rust & corrosion.

128275 128276

CMT Blade & Bit Cleaner (18 oz.)

CMT Blade & Bit Cleaner (1 gal.)

$9.99 $32.99

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR STAIN & FINISH COLORS 69

Glues & Tapes ABATRON WOOD RESTORATION SYSTEM

LiquidWood® consolidator & WoodEpox® filler together make up one of the best wood repair systems in the business. For any repair larger than a nail hole, indoors or out, Abatron is your best choice for the job.

LiquidWood is a 2-part epoxy formulated to allow deep, thorough penetration into, soft or completely rotted wood. It can be poured or brushed into affected areas, where it soaks in & then cures (1-3 hours, or just minutes if heated) to harden, stabilize & reinforce the entire area. LiquidWood is the best primer for using WoodEpox filler whether or not decay is present.

WoodEpox is a lightweight, 2-part, powerfully adhesive epoxy putty that hardens in 1 to 2 hours. It's ideal for rebuilding carved or moulded shapes, for recreating missing pieces of trim, or for sculpting like modeling clay & will not shrink as it dries. It can be carved, sanded, sawed, planed or shaped. Its light neutral color can be tinted with UTCs, stains, dyes or pigments and it accepts paints & clear finishes flawlessly.

195600 Abatron Wood Restoration Kit $39.99 (includes 12 oz. ea. LiquidWood &WoodEpox) Size LiquidWood WoodEpox Sizes listed 12 oz.

195601 $19.99 195602 $21.99 show the Quart 195603 $42.99 195606 $42.99 total amount (Parts A & B 1/2 Gallon 195604 $69.99 195607 $62.99 195608 $149.99 combined). 2 Gallons

GLUE CLEANING CHISEL This tool has a 1/2” blade with radius edge that is flush with the hardwood handle so the blade lays completely flat. It pares away dried glue & debris from inside corners & surfaces within drawers without damaging adjacent surfaces. Brass rivets. Shellac finish.

177954

Glue Cleaning Chisel (OAL 7”) $49.99

UNIBOND 800 LAMINATING GLUE with Catalyst

Unibond 800 is a 2-part, urea formaldehyde, liquid resin glue. Because of its relatively long open time (45 mins. @ 70°F), rigid glue line, and gap filling properties (up to 0.02”), it is ideal for veneering, bent wood laminations or any vacuum pressing application. Unibond won’t cold creep like some PVA glues, so complex veneer projects & curved work are safe.

It is water resistant, so it makes a first-rate plastic laminate glue in kitchens & bathrooms. Apply with a short-nap roller or brush. Use tints for customizing color. Not for use under 70°F. Unibond 800 w/ Medium Catalyst (gal.) $54.99 Unibond 800 w/ Dark Catalyst (gal.) $54.99 White Tint for Unibond (8 oz.) $8.50 Dark Tint for Unibond (8 oz.) $8.50

SUPER-SOFT 2 Veneer Softener Relaxes & helps flatten wavy veneer making it more pliable to minimize cracking & splitting. Spray or brush-on. Quart.

165103 Super-Soft 2 Veneer Softener

$24.99

HEAT LOCK Iron-On Veneer Glue

Veneer without clamps, vacuum presses or toxic glues Apply this water-based PVA glue to both surfaces, let it dry (20 min) & iron them together, just like iron-on edge banding.

Covers approx. 40 sq. ft. per pint or 320 sq. ft. per gal.

165101 165102

128436

High Friction Finger Wrap Tape (2.2 yards, 5 yards stretched)

486091 486092 486093 489012 489013

3/4” x 6’ UHMW Slick Tape 2” x 6’ UHMW Slick Tape 3” x 6’ UHMW Slick Tape 3/4” x 3/8” x 24” UHMW Strip 4” x 1/4” x 36” UHMW Strip

Heat Lock Iron-On Veneer Glue (pt.) $19.99 Heat Lock Iron-On Veneer Glue (gal.) $49.99

$3.99

UHMW SLICK TAPE & STRIPS Ultra high molecular weight polyethylene material perfect for fences, jigs, drawers & other parts that need to glide easily. Tape has a self-adhesive strip on one side to easily attach to surfaces. Use the strips in making custom miter guides, sliding tables & fences. $6.99 $14.99 $22.99 $8.99 $16.99

HEAVY-DUTY DOUBLE STICK TAPE - a reliable

indispensable aid for jig makers, turners, router users, & anybody who needs to temporarily stick things together

This paper tape is coated on both sides with a powerful natural rubber adhesive that bonds to almost any clean surface. 7 mil thickness even lets the tape join surfaces like coarse textured wood.

100151 100152 100153

3/4” x 36 yds. Dbl. Stick Tape 1-1/2” x 36 yds. Dbl. Stick Tape 3” x 36 yds. Dbl. Stick Tape

$9.99 $17.99 $34.99

ULTRA-CAT Pre-catalyzed Powder Resin Veneer Glue This pre-catalyzed, dry powder resin glue activates when mixed in water. Super tough, it won’t creep like PVA glues, which can move under stress in bent lamination work. Open time outside the mixing pot is 20-30 min. 1 lb. makes about 1-1/2 qts. of glue. Mix only what you’ll use in an hour. Optional additive lightens the glue line from brown to light tan.

165109 165110

Newly Reformulated in May 2012.

Be sure to read instructions before use.

116248 116249 116246 116247

HIGH FRICTION FINGER WRAP TAPE This latex impregnated gauze protects fingers from cuts & scrapes and helps grip small objects. The 2” wide stretch fabric holds its shape, & can be removed for reuse. Finger wrap adheres only to itself & it won’t leave a tacky residue behind.

Ultra-Cat Veneer Glue (5 lbs.)

Ultra-Cat Lightener (8 oz.)

$34.99 $9.99

EPOXY WOOD PUTTY STICK This adhesive putty can be shaped & molded readily while soft; it hardens in 15 min. with no measurable shrinkage. Once cured, it will mill, drill, cut & sand like wood. When sanded, it accepts pigment stains. 1 oz. tube (7/8” x 3-1/2” roll).

165131 Epoxy Wood Putty Stick, Oak/Lt. Walnut $5.99 165132 Epoxy Wood Putty Stick, Cherry $5.99 165133 Epoxy Wood Putty Stick, Natural Maple $5.99

SYSTEM THREE EPOXIES

Top-of-the-line general purpose high strength epoxies from one of the most respected names in adhesives

System Three QuickCure® has a 2-3 minute open time, & cures tack free in 5 mins., providing high strength & water resistance. T-88 Structural Aircraft Adhesive is a slow-curing, ultra high strength glue with good gap filling properties & flexibility & a generous 40-60 min. open time. After 24 hours it’s fully waterproof & immune to most solvents. Clean up wet glue with white vinegar followed by soap & water.

165041 165043 165045 165046

System Three QuickCure Epoxy (8 oz.)

System Three QuickCure Epoxy (pint) T-88 System Three Epoxy (8 oz.)

T-88 System Three Epoxy (pint)

STICKFAST EPOXY Economical quick-set 2-part epoxy sets in 5 minutes. 1-to-1 mix ratio. Bonds wood, metal, glass, phenolic plastics, rubber & ceramics. Dries clear.

$19.99 $36.99 $22.99 $30.99

146159 StickFast 5 Min. Epoxy 9 oz. $10.99

70 OUR CLASS SCHEDULE IS UNDER “CLASSES” AT HIGHLANDWOODWORKING.COM

Glues

HIGHLAND WOODWORKING CA GLUES

Highland Woodworking CA Glues

New formulations make our CA glues the most versatile on the market These “super” glues are triple distilled to a level of purity that guarantees long shelf life & permanent bonding power for virtually any material in the shop. These non-toxic adhesives are perfect for a host of household uses. Dishwasher & microwave safe.

1 oz.

2.5 oz.

4.5 oz.

8 oz.

16 oz.

Thin Medium Thick 146120 146123 146126 $3.99 146191 146192 146193 $7.50 146122 146125 146128 $11.99 146152 146153 146154 $19.99 146155 146156 146157 $36.99

Thin formula (3-10 sec. cure) is the best choice for non-porous materials, penetrating deeply to stop hairline cracks in wood. Medium (8-15 sec.) & Thick (10-25 sec.) CAs will bond wood permanently with just a few seconds’ hand pressure instead of clamping; imagine a rub joint that reaches 90% strength in less than 30 seconds! A spritz of Activator will GLUE SIZES ARE LISTED BY WEIGHT accelerate cure time to just a few seconds. Gel formula (15-30 sec.) 146129 Gel CA Glue (20gm – 3/4oz.) $6.50 is as thick as paste. Flexible formula (8-20 sec.) is perfect for join- 146130 Flexible CA Glue (1 oz.) $4.99 ing dissimilar materials; like wooden barrels & metal pen parts. 146131 Flexible CA Glue (2 oz.) $9.99 The Change A Tip 8 Pak replaces the standard tip on 1, 2 & 4 146141 Black Flexible CA Glue (1 oz.) $4.99 oz. CA glue bottles with interchangeable micro tips. It includes 146142 Black Flexible CA Glue (2 oz.) $12.99 $3.99 a bottle adapter, 2 storage caps & 2 ea. of 14, 16, 18 & 20 gauge 146135 Pump Activator (2 oz.)

146136 Pump Activator (8 oz.) $8.99 micro tips. $7.99 The Glue Dispense Pak includes 2 12cc graduated syringes, 3 146137 Aerosol Activator (7 fl. oz.) ea. of 14 & 16 gauge micro tips, 2 ea. of 18 & 20 gauge stainless 146146 Aerosol Activator (12.5 fl. oz.) $10.99 146138 CA Debonder (2 oz.) $5.99 steel needles & 2 storage caps.

146147 CA Debonder (4 oz.) $8.50 The Squeeze Pak is a small, accordion style precision dispens- 146133 Change A Tip 8 Pak $3.50 er. It includes a stainless needle, storage cap & one ea. of 14,16,18 146160 Dispense Pak $3.50 & 20 gauge micro tips.

146149 Squeeze Pak $2.50 The Micro Tip Assortment has 5 ea. of the 14, 16, 18 & 20 146150 Micro Tip Assortment $3.99 $1.50 gauge tips that are supplied in the Squeeze Pak, Syringe Kit & 146151 Standard Repl. Tips (pair)

(fit 1, 2 & 4 oz. bottles) Change A Tip 8 Pack.

CHAIR DOCTOR™ GLUE This thin, deeply penetrating glue is perfect for repair of loose chair joints or other joints not easily disassembled. It causes wood fibers to swell, & then locks them in place. 4 oz. squeeze bottle includes glue syringe & three 1” needles.

165031

165030 Chair Doctor Glue Chair Doctor Glue Refill (2 oz.)

$12.99 $9.99

HIDE GLUE the choice for sensitive repairs & Luthiers Despite all the modern adhesives available, hide glue is still the best for many applications. It can be debonded at any time with gentle heat. In an electric glue pot, at the proper temperature, it stays ready to use all day with minimal attention. Our hide glue, by Milligan & Higgins, is good general purpose glue. It’s a high grade, light colored, odorless glue with gram strength of 192g. Mixing instructions on our website.

166011 166012

Hide Glue (1 lb.) $9.99 Hide Glue (5 lbs.) $38.99

TITEBOND II WATERPROOF GLUE Ideal for high moisture, indoor applications & limited outdoor use. Meets ANSI/HPVA Type II water-resistance.

5 min. open time. Clamp for 30 min. Fully cured after 24 hrs.

165019 165021 165038

Titebond II (8 oz.) $4.50 Titebond II (pint) $6.50 Titebond II (quart) $8.99

ORIGINAL TITEBOND YELLOW GLUE Standard high-strength yellow interior woodworking glue with strong initial tack. Clamp for 30 min. Full strength in 24 hrs.

165039 165040 165001 165002

Original Titebond (8 oz.)

Original Titebond (pint) Original Titebond (quart) Original Titebond (gallon)

Traditional Tinner’s Flux GLUE BRUSHES

These popular glue brushes have 3/8” dense, semi-stiff bristles which hold plenty of glue.

166025 107792

Pack of 10 Glue Brushes Pack of 50 Glue Brushes

$2.50 $9.99

166024

Glue Syringe 3/4 oz. (20cc)

$4.50

MULTI TIP GLUE SYRINGE Syringe includes 2 blunt metal tips for very thin to medium adhesives, & 2 sealing caps.

GLUE SPREADER 1-pint bottle with 2-3/8” roller cap, 2 styles of 4mm biscuit joiner tips & sealing cap.

167201

Glue Spreader

ELECTRIC GLUE POT Dissolves hide glue & maintains approx. 140°F. Aluminum glue container removes for cleaning.

165301 165309 165314

Electric Glue Pot (1 qt.)

Spare Aluminum Liner Lid for Glue Pot

$139.99 $54.99 $22.99

TITEBOND LIQUID HIDE GLUE Liquid Hide glue permits future repairs since it can be re-dissolved by applying moisture. Longer open time than white glue. Dries brown. Use it as a base for crackle effect finishes.

166015

Titebond Liquid Hide Glue (8 oz.)

TITEBOND III ULTIMATE WOOD GLUE ®

$5.99

A water cleanup alternative to polyurethane glues.

Titebond III passes the ANSI/HPVA Type I waterresistance test. Lengthy 8 min. open time. Clamp for 30 min. Fully cured after 24 hrs. Use when temp. is above 45° F. (Not for continuous submersion.)

165061 165062 165063 165064 165065

$3.99 $5.99 $7.99 $21.99

$7.99

Titebond III Ultimate (4 oz.)

Titebond III Ultimate (8 oz.)

Titebond III Ultimate (pint) Titebond III Ultimate (quart) Titebond III Ultimate (gallon)

$3.99 $5.99 $9.99 $13.50 $37.99

FASTCAP GLU-BOT The first glue dispenser that won’t drip or spill As you squeeze the Glu-Bot, a controlled flow of glue moves into the tip chamber from the bottom, letting you lay a perfect bead of glue on horizontal Repl. Parts $.99 each Glu-Bot Babe-Bot or vertical surfaces. As you release your grip, the tip sucks in Yorker Tips (5 pk) 167218 167223 that last drip. Includes a blade tip for laying down a wide Blade Tips (5 pk) 167219 167224 bead, & a small, round “Yorker” tip.

Repl. Caps (5 pk) 167220 167225

167216 167221

Glu-Bot (16 oz.)

Babe-Bot (4 oz.)

$5.99 $3.99

Lid & Sealing Gasket

167217 167222

GO TO HIGHLANDWOODWORKING.COM TO SEE OUR SELECTION OF BOOKS & DVDS 71

Clamps

KLEMMSIA CAM-ACTION CLAMPS

BESSEY AUTO-ADJUST TOGGLE CLAMPS

One clamp will replace a range of ordinary toggle clamps.

Bessey’s unique Auto-Adjust Toggle Clamps automatically adjust to different workpiece thicknesses while maintaining constant clamp pressure. An adjustment screw sets the clamping force ON SALE! from 25 to 550 lbs. 7/8” dia. clamp pad & 2-1/2” x 2-1/4” base plate. Size is clamp capacity.

165581 2” Horiz. Auto-Adjust Clamp $17.99 $20.99 165582 2-3/4” Horiz. Auto-Adjust Clamp $18.99 $21.99 165583 1” Inline Auto-Adjust Clamp $19.99 $22.99

166101 166102 166103 166104 166105 166106

P1

H2

MODEL REACH

V1 V2 V3 H1 H2

1-5/16” 1-7/8” 3” 2-1/8” 2-3/4”

P1

1-1/4”

GRIP RANGE BASE TO U-BAR

7/8” 1-1/4” 1-1/4” 1” 1-3/8”

CAPACITY

200 lbs.

500 lbs.

500 lbs.

200 lbs.

500 lbs.

MODEL TRAVEL SPINDLE HEIGHT CAPACITY

1”

168206 Extension Pad $5.99 With parallel jaw faces, K Body clamps are the best choice when gluing-up doors, panels BESSEY & cabinet carcasses.

K BODY REVO CLAMPS

Pressure is applied evenly across the 1-7/8” x 3-3/4” jaw faces. The lower jaw unit can be reversed to create a spreader clamp. Strong steel I-beam rails have 2 moveable stand offs to protect your work & a support at the end of the rail for stability. Optional Clamp Brackets secure the clamps to your workbench (up to 2” thick).

The Extender links together 2 K body rails for supersizing your clamping length capacity.

TOGGLE CLAMPS Each clamp has a threaded, neoprene-tipped spindle & 4 mounting holes in the base flange.

Model P1 works & locks in pull or push mode.

V3

Lightweight, fast-acting clamps apply pressure instantly Steel & beech clamps with cork lined heads.

Cam-action edge LENGTH DEPTH clamp seats against 168201 7-3/4” 4-1/4” $16.99 bar of a regular clamp. 168202 15-1/2” 4-1/4” $18.99 Cork lined extension 168203 23” 4-1/4” $20.99 pad spreads pressure 168204 7-3/4” 7-3/4” $25.99 168205 Edge Clamp $9.99 over wider areas.

$10.99 $13.99 $13.99 $10.99 $11.99

165521 12” K Body $52.99 165522 24” K Body $57.99 165523 31” K Body $62.99 165524 40” K Body $67.99 165525 50” K Body $71.99 165526 60” K Body $76.99 165320 Bessey TK6 Clamp Brackets (pair) $8.50 165490 Bessey K Body Extender $18.99

300 lbs. $15.99

JORGENSEN ALUMINUM CLAMPS These high strength SELECTED STEEL I-BAR CLAMPS bar clamps are ex“Best overall choice” Extra high carbon steel in this I-bar of IN truded in a strong Fine Woodworking 1-1/2” x 7/16” x 5/32” cross-section has aluminum cross-section load limit of 6800 lbs. Jaw reach is 2” from for exceptional stiffness, but are light­weight for convenient glue-up. 4-1/22 inches of clamping pads apply bar. Jaw width 1-3/4”. Size indicates capacity.

163513 36” $40.99 163514 48” $45.99 even pressure with a secure grip. Size indicates capacity.

163519

165304 24” $27.99 165307 60” $34.99 165305 36” $29.99 165308 72” $36.99 165306 48” $32.99 163519 Set of 4 Clamp Pads $4.99

BESSEY MEDIUM DUTY CLAMPS These 2-1/2” deep bar clamps are for small to midsize holding jobs & glue-ups. Easy to grip, tough composite handles. 1” x 1/4” bar.

165567 6” $16.99 165568 12” $17.99 165569 24” $21.99 165570 36” $25.99

COLLINS MITER SPRING CLAMPS

Perfect for keeping pressure on miters while glue dries These clamps will not buckle when spread, nor will the pincers develop memory & lose their holding power. Sharp ends won’t mar wood surface. We recommend the pliers to save your fingers & insure the points don’t scratch the wood.

Set of 4 Clamp Pads

$4.99

9” Veneer Screw 12” Veneer Screw 18” Veneer Screw

$17.99 $22.99 $27.99

JORGENSEN HANDSCREW CLAMPS MADE IN These traditional JAW MAX. MODEL LENGTH OPENING USA clamps have cold 163537 5/0 4” 2” $16.99 drawn steel screws 163520 3/0 6” 3” $19.99 & nuts, 163521 0 8” 4-1/2” $23.99 straight163522 1 10” 6” $27.99 grained hard 163523 2 12” 8-1/2” $30.99 maple jaws & 163524 3 14” 10” $39.99 handles, & 163525 4 16” 12” $52.99 heavy steel ferrules.

JORGENSEN VENEER SCREWS Great for jigs, fixtures & presses that need serious stock control Strong, fast acting Acme threads & speed cranks make them ideal economical bench dog movers.

178261 Collins Miter Clamp Pliers w/4 Clamps $25.99 178260 4 pk Miter Clamps (jaws open to 1-5/8”) $12.99

163535 163536 163579

BOWCLAMP CLAMPING CAULS With Bowclamp clamping cauls, you can do the same job with 2 clamps!

Bowclamp cauls are CNC machined with a curve which allows them to distribute the clamping pressure that is applied at the ends to span perfectly across the NEW! MADE IN USA entire length of the caul. They reduce the number of clamps needed for a project & apply pressure to the center of wide pieces without needing deep reach clamps. They work with all styles of clamps & have 168241 2’ Bowclamp Twin Pack $45.99 168242 3’ Bowclamp Twin Pack $65.99 a T slot milled into the ends to accept many F-style clamps. Made 168243 4’ Bowclamp Twin Pack $85.99 from quartersawn hard maple. Leather strap for hanging storage. 168244 Master Pack (2 ea. length) $174.99 VARIABLE ANGLE STRAP CLAMP The head on this strap clamp secures the 1” x 25’ high-strength nylon webbing from both sides, maintaining even pressure around any shape. Built-in winder keeps the strap neat. Includes 4 corner pieces. Use extra corner pieces for objects with more than 4 sides/corners.

165584 165585

Bessey Variable Strap Clamp 6 Vario-Angle Corner Pieces

$54.99 $18.99

DUAL FUNCTION!

BAR CLAMP & SPREADER These economical lightweight clamps APPLY UP are excellent one-handed pump action TO 330 LBS. OF FORCE! clamps for positioning & glue-up, and quickly convert into spreaders for joint disassembly or use as leveling jacks. 3-3/8” deep high strength resin jaws have pliable pads. 3/4” wide x 1/4” thick steel clamping bar.

169161 169162 169163

12” Bar Clamp & Spreader 24” Bar Clamp & Spreader 36” Bar Clamp & Spreader

$14.99 $16.99 $19.99

72 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748

Index

Abatron Wood Restoration 70 Abrasive Belt Cleaners 59 ADHESIVES 70, 71 Adzes 16 AIR CLEANERS 61 Anchorseal End Grain Sealer 33 Aprons 8 Angle Gauges 29-31 Arbortech Power Carvers 25 ARTI WOOD DYES 65 Assembly Tools 51 AURIOU Adzes 16 Carving Tools inside front cover Drawknives 17 Holdfast 42 Rasps 39 Awls 28, 32 Axes inside front cover, 40-41 Ball Bearing Work Supports 9 BANDSAWS 6 Bandsaw Blades & Acc. inside front cover, 2, 54-56 Bedrail Fasteners 47 Beeswax 66 Bench Brush 9 Bench Hardware 42-43 Belts, Machine Drive 8 Bevel Squares 29 Biscuits 47 Bit Braces 16 Blade & Bit Cleaner 45, 69 Bloxygen Finish Preserver 68 BODGER TURNING TOOLS 33 Boeshield 69 Bowsaws 26 Branding Irons 7 Briwax 66 Buffing Wheels & Acc. 12-14, 66 Bull Frog Rustproofers 69 Burnishers & Scrapers 15, 32 CA Glues 71 Calipers & Dividers 31, 33 Camellia Oil 69 Carnauba Wax 66 CARVING TOOLS inside front cover, 16-17, 23-25 Casters, Locking Swivel 9 Center Finders 32 Ceramic Sharpening Stones 11 Chairmaker’s Kits 16 Chairmaker's Tools & Plans 16-17 CHISELS 22, 70 Chucks, Lathe 2, 34-35 CLAMPS 50, 72 CLASSES 1 Color Wheels 64 Colwood Woodburning Tools 41 Contour Gauges 30 Cool Blocks Bandsaw Guides 56 Crosscut Sled Kit, Tablesaw 57 Dado Blades 55, 57 Dial Calipers 29 Dial Indicators 30 Diamond Wheel Dressers 12 Diamond Sharpening Stones 11 Digital Measuring Devices 9, 29-31, 65 Double-Stick Tape 70 DOVETAIL JIGS 48 Dovetail Markers 31 Dovetail Saws 26-27 Doweling Jigs & Acc. 9, 47 Dowel Maker, Rounders, Pointers, & Ballers 9 Drawknives 17

DRILLS, BITS & ACC. 3-4, 14, 16, 42, 47, 50-53, 58, Drill Press Vise 42 DUST COLLECTION 60, 61 Dust Masks 61 Dust Pan 9 DVDS back cover, 14, 16, 68 Dyes & Stains 64, 65 Ear Protection 36 Epoxy Adhesives 32, 70 Face Shields & Eye Protection 36 Feather Boards 9, 57 FEIN TOOLS MultiMaster Tools & Acc. 20-21 Turbo Vac Bags & Filters 61 FESTOOL 3-5, 61 Files & Rasps 11, 27, 38-39,

Magnifiers & Mag. Glasses 36 Mallets 24, 51 MARKING & MEASURING 8, 28-33, 46, 57, 65 Medallions 7 Meguiar's Polishes 66 Metabo Sander 32 Milk Paint 64 Miter Guides & Acc. 8, 57 Miter Saws 5, 27 Miter Trimmer 9 Miter Vise 42 Mobile Base 6, 9 Moisture Meter 9 Mortise Attachments, Drill Press 47 Mortising Machines 5, 47-49 back cover MULTI-ROUTER 47 FINISHING SUPPLIES 62-68 Mylands Finishes 62, 66 FLEXCUT CARVING TOOLS NAREX CHISELS 22 17, 23, 25 Nobex Miter Saws 27 Flexible Shaft Carvers 25 Oils, Finishing 63 Foredom Tools & Acc. 25 Order Form 37 FORREST SAW BLADES 57 Ox-Head Axes 41 Forstner Bits 52 Pen Turning Supplies 32 Froe 16 Performax Sandpaper 59 GENERAL FINISHES 62-64 Phenolic Resin Board 57 Gloves 36 Planers 3, back cover GLUES 32, 70, 71 GRÄNSFORS BRUKS AXES 40 PLANES, HAND 2, 18-20 Plane Sacks 69 Grinders & Accessories 12-14 Plans, Sculptured Chairs 16 Hammers 51 Plug Cutters 51 Hand Power Tools 3-6, 21, Pocket Hole Drill Guides 2, 50 25, 32 Power Carvers 25 Hand Shears 7 Power Tenon Cutter 47 Hats 7 Power-Twist Drive Belts 8 Hearing Protection 36 Protractors 28, 31 Hock Plane Irons & Pulleys, Machined 8 Chip Breakers 20 Pumice & Rottenstone 66 HOFMANN & HAMMER Push Blocks & Sticks 36 WORKBENCHES 43 Quick-Crank Bandsaw Hollow Chisel Mortising Bits 47 Tensioner 56 Honing Guides 13 Rasps & Rifflers 38-39 HVLP Spray Systems 67 Remote Control, HYDROCOTE FINISHES 62 Dust Collection 60 Inshaves 17 Renaissance Wax 66 J Rollers 51 Respirators 61 Japanese Chisels & Saws 22, 27 Rollers, Veneer & Laminate 51 JDS Air Cleaner 61 Routers 5 Jigsaws 4 Router Acc. 44--49 Joinery Tools 3, 5, 47- 50 Router Base Plate 46 Knives, Carving 23-24 ROUTER BITS 44-46, 49 Knives, Marking 28 Router Speed Control 46 Knobs for Jigs & Fixtures 8 RouterTable 46 KREG TOOLS Rulers 28, 31 Bandsaw Fence 56 Rust Prevention 28, 69 Beaded Face Frame 51 SAFETY EQUIPMENT Clamps 50 36, 60, 61 Feather Board 8 Salad Bowl Finish 63 Miter Guide 57 SANDING SUPPLIES 4, 25, Miter Track 8 32, 58-59 Pocket Hole Jigs 50 Sanding Blocks 59 Push Stick 36 Saw Acc. 8-9, 26-27, 56-57 Router Table 46 SAWS, CIRCULAR 3, 5 Screws 50 SAWS, HAND 2, 26-27, Shelf Pin Jigs 51 LATHE, TOOLS & ACC. 2, 32-35 SAWS, MITER 5, 27 Saw Sets 27 Lazy Susan Bearings 9 SAWSTOP 6 LEIGH JOINERY JIGS 45-46 Scales 65 Letters & Numbers Stamps 7 Scorps 17 Liberon Steel Wool 68 Scotch-Brite™ Pads 68 LIE-NIELSEN TOOLS 2, 9, 15, 17-19, 22, 31, 52 SCRAPERS, BURNISHERS Machinist's Blue Layout Dye 28 & ACC. 15, 32 Magnetic Tool Holders 8 Screwdrivers 32, 53 Magnets, Rare Earth 8 Screw Extractors 51, 53

Screws 50, 53 SHARPENING 10-15, 23, 27, 32, 40 Shelf Drilling Jig 51 Shellac 62 SHOP ACCESSORIES 7-9, 51, 57 Shop Vacs 61 Shop Sign 7 Sliding Table Kit, Tablesaw 57 Smock 8 Solar-Lux Dye Stains 64 SPAX WOOD SCREWS 53 Speed Control, Electronic 46 Spiral Ratchet Screwdrivers 53 Spokeshaves 17 Spoon Bits 16 Spray Finishing Equipment 67 Spring Clamps 72 SQUARES 28-29, 31 Stains & Dyes 64, 65 Stamps, Letters & Numbers 7 STARRETT TOOLS 28 Steamer, Portable 16 Steel Wool, Liberon 68 Stock Support 9 Straightedges 28, 31 Strops 11-12, 23 Switches 46 Taper Jig 57 T Shirts 7 T Slot Track 8 TABLE SAWS 6 Table Saw Blades & Acc. 6, 30, 55, 57 Tapes, Adhesive 8, 70 Tapes, Measuring 8, 29 Template Guides 46 Threaded Inserts 47 Threaders, Taps & Dies for Wood 9 Throat Plates, Table Saw 57 Toggle Clamps 72 Tool Rolls 24 TORMEK SHARPENING SYSTEM 13-14 Trammel Points 28-29 TransTint Dye Concentrates 64 Trend Airshield 61 Travisher 17 Tung Oil 63 Turning Kits & Projects 32 TURNING TOOLS & ACC. 2, 30-33 UHMW Tape & Strips 70 UTCs - Universal Tint Colors 65 Vac Hoses 60 Varnishes 63 VISES & ACCESSORIES 42-43 Viscosity Cup 67 Watco & Waterlox Finishes 63 WATERSTONES & ACC. 10-14 Waxes 66 Whittling Tools 23-24 Wolverine Grinding Jig 13 Woodburning Tools 41 Wood Fillers 67 WOOD SLICER RESAW BLADES 54 Wood Threaders 9 WORKBENCHES & HARDWARE 42-43 Work Support 9 Worktunes Ear Muffs 36 Zero-Clearance Throat Plates 56-57

SAFE WOODWORKING: A Disclaimer Working with wood is inherently dangerous. Anyone using any of the tools or supplies we sell is personally responsible for learning the proper techniques involved, and he or she assumes all risks & accepts complete responsibility for any & all damages & injury of any kind, including death, which may result from the use of any product purchased from Highland Woodworking. Before using any hand or power tool with which you are unfamiliar, consult its operating instructions, &, if necessary, seek instruction by a qualified person well versed in its operation & appropriate safety techniques. All information & advice stated or implied in this catalog or by sales staff is only for the purpose of assisting you in purchasing decisions; it remains up to you to make sure what you're doing is safe. The joy of woodworking, rewarding as it is, is not worth the cost of getting hurt. Please keep safety foremost in your mind whenever you're in the shop.

NEW!

Now shipping SawStop’s Professional Cabinet Saws to the lower 48 states!

6mm Round Smooth File w/handle $25.99 8mm Round Smooth File $34.99 10” Flat Coarse File $39.99 10” Half Round Coarse File $39.99 6” Half Round Fine Curved File $39.99 8” Half Round Extreme $29.99 Fine Curved File w/handle 8” Extra Fine Side Float w/handle $54.99 8” Extra Fine Edge Float w/handle $49.99

See page 6 for details about the Safest Tablesaws on the market!

127522 127523 127524 127525 127526 127527

127528 127529

fine tools & education

HIGHLAND Woodworking



220486P

FWW Package Deal Archive & Commemorative First Issue

LIMITED QUANTITY!

$89.99 $119.94

Ships within the lower 48 states for $24 surcharge.

160801 Steel City 40300HC 13” Portable Planer

with Carbide Cutters

$499.99

NEW!

PRSRT STD US POSTAGE PAID JAX, FL Permit No. 1519

with Helical-Style Cutter-head & 26 Carbide, Two-sided Cutters Steel City’s 13” portable planer has a 2” dia., helicalstyle head that uses 26 two-sided solid carbide indexed cutting inserts arranged in 6 rows around the cutter head, with the cutters in each row slightly offset from their adjacent rows. The carbide cutters stay sharp longer & hold up well against species that quickly dull HSS edges. See more details on page 3.

STEEL CITY 40300HC 13” PORTABLE PLANER

Information (404) 872-4466 Toll Free Orders (800) 241-6748 www.highlandwoodworking.com

Spring/Summer 2013 Catalog

1045 N. Highland Ave., NE Atlanta, Georgia 30306

est.

1978

FWW Magazine Archive 1975-2012 DVD-ROM 37 years of how-to projects, tips, techniques, & tools to make you a better woodworker. The Fine Woodworking Magazine Archive is a tool no shop should be without.

In one amazingly easy-to-search disc, you will enjoy 37 years of content from this award-winning magazine. That’s all 230 issues of FWW, starting with Issue #1 & including all issues from 2012. DVD-ROM disc will not play on stand-alone DVD players. It must be viewed on a computer with a DVD drive.

FWW Commemorative First Issue This blast from the past is an authorized special limited-edition of the FIRST FWW Magazine exactly as it was in 1975. Packaged in a handsome collector’s folio.

PACKAGE DEAL FWW ARCHIVE & COMMEMORATIVE FIRST ISSUE

The 3 & 6mm dia. round files have a close fitting rubber grip handle with a cutting length See page 38 for more of 3-1/2” & 4” respectively. Their OAL is 8”. The Iwasaki Carving Files.

8mm round file has a tang end & is 9-3/4” OAL. The 10” files measure 1” wide & 12” OAL with tang ends. The flat style has cutting teeth on both sides & the half-round has teeth only on the half-round side.

The 6” & 8” curved files are bent to a 7-1/2” radius, have teeth just on the convex side & are 8” OAL. The 6” is 5/8” wide with a cutting length of 5-1/2” & has a tang end.

The 8” is 3/8” wide with a cutting length of 4” and has a rubber-grip handle.

The float files are 5/8” wide & taper down to 1/8” at the nose. The cutting length is 4” with an OAL of 8”. They are thin in profile, measuring 7/64” thick. The side style has teeth on just one flat side. The edge style has the cutting teeth on a single edge of the file, with all other sides safe.

127521 3mm Round Extra Fine File w/handle $18.99 Both have rubber grip handles.

These new styles of our popular Iwasaki carving files from Japan are fast cutting like a rasp, but leave a nice surface finish like a file.

IWASAKI CARVING FILES