WINTER 2024
AND THE
90C Centurian Drive, Unit 211
Markham, ON L3R 8C5
Toll Free: 877-788-ADTO (2386) (within Ontario)
Telephone: 416-742-ADTO (2386)
Fax: 416-798-2613
www.adto.ca
MB #273 - 12100 Riverside Way Richmond, BC V6W 1K5
Ashley Opitz, Office Administrator Telephone: 604-278-6279
www.dtabc.ca
©2024 Craig Kelman & Associates Ltd.
All rights reserved. The contents of this publication may not be reproduced by any means, in whole or in part, without prior written consent from the publisher.
Published by:
2025 Pacific Dental Conference: Save the Date
The Pacific Dental Conference is one of the largest dental conferences in North America, offering a varied and contemporary selection of continuing education programs. Save the date for March 6-8, 2025, at the Vancouver Convention Centre.
2025 Technorama Conference: Save the Date
‘Bridging Tradition and Innovation,’ Technorama 2025 will be held April 4-5, 2025, at the Delta Toronto Airport Hotel & Conference Centre.
ADTO Gala Recap
ADTO’s Great Gatsby Gala, held at the magnificent Casa Loma in Toronto, took a step back in time and immersed its attendees in the opulence and glamour of the roaring twenties.
CANDULOR: The Personal
CANDULOR, a Swiss manufacturer specializing in high-quality dental prosthetics since 1936, combines advanced materials and a commitment to education through its Swiss School of Prosthetics to enhance the quality and efficiency of full, partial, and implant-supported restorations for dental laboratories and practices worldwide.
2025 Buyers’ Guide
The 14th annual Buyers’ Guide contains a list of industry products and services by alphabetical order and by category.
3rd Floor, 2020 Portage Avenue
Winnipeg, MB R3J 0K4
Tel: 204-985-9780
Fax: 204-985-9795
Email: jenna@kelman.ca www.kelman.ca
Managing Editor: Jenna Conrad
Design/Layout: Dia Chea
Marketing Manager: Chad Morrison
Advertising Coordinator: Sabrina Simmonds
Return undeliverable Canadian addresses to:
Craig Kelman & Associates
3C-2020 Portage Avenue
Winnipeg, MB R3J 0K4
Publication Mail Agreement: PM#40065075
Box 397, 101-1001 West Broadway
Vancouver, BC V6H 4E4
90C Centurian Drive, Unit 211 Markham, ON L3R 8C5
Ashley Opitz, Administrative Assistant Toll Free: 1-888-495-4566
Toll Free: 1-877-788-ADTO (2386) (within Ontario)
Telephone: 604-278-6279
www.dentaltechniciansofbc.com
Telephone: 416-742-ADTO (2386)
Fax: 416-798-2613
www.adto.ca
ADTO PRESIDENT’S MESSAGE
Karim Sahil, MDT, RDT, President, Association of Dental Technologists of Ontario
Partnerships in Dental Technology
t is a year to remember, a year to celebrate, and a year to be proud of being a dental technologist.
better service for our clients, for the insurance companies, and transparency for the end user, which is the patient.
DTABC BOARD OF DIRECTORS
ADTO EXECUTIVE BOARD OF DIRECTORS
PRESIDENT
PRESIDENT
Hal Hamilton, RDT
Karim Sahil, MDT, RDT
VICE-PRESIDENT
Shabana Mirza, RDT
VICE PRESIDENT Chris Opitz, RDT
TREASURER
John Eggeling, RDT
Nadja Jakobi, RDT
Aura Szigiato, RDT
Greg Tamkin, RDT
SECRETARY
Stuart Thomson
Debra Orozco Blanco, RDT
MANAGEMENT STAFF
DIRECTOR
Zhe Lin, RDT
Malcolm Ashford Executive Director
EDUCATION
Sunny Cai, RDT
DIRECTOR OF COMMUNICATIONS AND MEMBER SERVICES
Tiffany Lee, RDT
Our greatest strength comes with unity, and the President of DTABC, Will Varda, has expressed that fluently. We have been working closely with DTABC for many years, and the positive impact it has made in the dental technology industry can be seen through the expansion of ideas and their solidification. Together, the ADTO and DTABC will expand on the Suggested Fee Guide to benefit our members through changing business models and provide a linear understanding of who we are, what we do, and why we do it.
We are expecting to see a massive shift towards a bright future that represents dental technologists and new incoming dental professionals under the umbrella of regulated healthcare Professionals. A combined voice of ADTO and DTABC will ensure the expansions necessary for the dental technology industry and its members, leading to better and safer dental prosthodontics for patients.
We want to thank our members for joining tradeshows, events, and meetings and expressing your constructive feedback to help us navigate multiple directions. We appreciate our members’ trust in the Executive Board members and the ADTO. We will continue to be the collection voice of dental technology in Ontario and work closely with DTABC in unification.
Renata Cecconi 604-940-2995
MEMBER BENEFITS
Chris Ji, RDT
PAST PRESIDENTS
2016-2020 - Franklin Parada
2010-2016 - Jason Robson
2007-2010 - Gabriel Ghazal
2004-2007 - Stephen DeLuca
2003 - Michael Hrabowsky
2001-2002 - Al McOrmond
2000 - David Kochberg
1999 - Thomas Kitsos
1998 - Feliks Dawidowicz
1997 - Wilhard Barth
1996 - Bob Huybrechts
1994-1995 - Andre Theberge
1992-1993 - Michael Hrabowsky
1990-1991 - Jamie Matera
1989 - Joe Nagy
Our partnership is a proponent of verifiable dentistry when it comes to our industry, and the expansion of our associations with similar end goals gives us the possibility of change. The Canadian Dental Care Plan (CDCP) has been a hot topic amongst many dental health professionals. Creating the process of yearly adjusted ‘suggested fees’ structures to match the inflation rate and by formalizing our Suggested Fee Guide between both provinces, we create an avenue to provide
MDT, RDT
Karim Sahil, MDT, RDT President Association of Dental Technologists of Ontario
MB #273 - 12100 Riverside Way Richmond, BC V6W 1K5
Ashley Opitz, Office Administrator Telephone: 604-278-6279 office@dtabc.ca www.dtabc.ca
DTABC BOARD OF DIRECTORS
PRESIDENT
Will N. Varda, RDT, Anvarda Dental Services Ltd.
VICE-PRESIDENT
Calvin Moon, RDT, Moon Dental Technology Solutions
PAST PRESIDENT
James Neuber, RDT, Ocean Ceramics Ltd.
Ayumi Hirose, RDT, Nacre Dental Ceramics Ltd.
Mohammad Lashgary, RDT, Kinetic Dental Laboratory
Olaf Lutz, RDT, Okanagan Dental Lab Inc.
Chris Opitz, RDT, Shanto Dental Ceramics Ltd.
MANAGEMENT STAFF
Lih Fen Young, RDT Executive Director lih@dtabc.ca
Ashley Opitz Office Administrator office@dtabc.ca
MESSAGE
Will Varda, RDT, President Dental Technicians Association of BC
Dental Technology Partnerships: Advancements and Impact
ello Everyone,
HI’m thrilled to announce a significant development for our profession in BC and across Canada. I’ve had the pleasure of speaking extensively with Karim, the President of the ADTO. For months, our two Boards have been discussing something we have long needed in our province. By the end of the year, we will officially roll out a suggested fee guide for dental technology in BC!
While not mandatory or enforceable, the suggested fee guide will truly reflect our value. Developed by the ADTO, it is based on unbiased time-in-motion studies that carefully analyzed the time and effort required and the capital and material expenses necessary for nearly all lab tasks. We are deeply grateful for the ADTO’s efforts in creating this essential tool, and we’ve been pleased to contribute to its development costs. Adopting this suggested fee guide not only elevates our profession but also signifies a renewed partnership between our associations. With the BCCOHP expanding
and the federal government introducing the Canadian Dental Care Plan (CDCP), strong connections between associations across Canada have never been more essential.
The fee guide will serve as a vital resource for new laboratory owners and will be shared with the dentist association. More importantly, it establishes our value to the government and insurance companies. By formalizing our fee structure between BC and Ontario, we can come to the table as equal partners, helping ensure a smooth transition to the CDCP as a unified voice.
Exciting times lie ahead for our profession. If you’d like to get involved, please get in touch with the DTABC – there are Board positions available.
All the best,
Will Varda, RDT President
Dental Technicians Association of BC
Pacific Dental Conference
Three days of varied and contemporary continuing dental education sessions are offered (something for your whole team)
Fantastic line-up of speakers / topics to choose from in open sessions and hands-on workshops, as well as the Live Dentistry Stage in the Exhibit Hall
Spacious PDC Exhibit Hall with all your favorite exhibiting companies looking forward to connect with you again
Lunches & Exhibit Hall Receptions (Thurs/Fri) included in the registration fee
Fantastic shopping, beautiful seawall access within blocks of your hotel, and great spring skiing, golfing and cycling
Navigating Winter Challenges: Strategies for Business Preparedness
Michelle Ann-Zoleta, Health & Safety Manager – Peninsula Canada
As winter sets in, with its sweeping snowstorms and plummeting temperatures, businesses face unique challenges. From unpredictable weather disruptions to potential risks to employee safety, it’s critical for companies to take proactive measures to protect both their operations and their workforce. Implementing a well-defined inclement weather policy is one of the most effective strategies for ensuring business continuity during the harsh winter months.
The
Importance of an Inclement Weather Policy
The unpredictable nature of winter weather can disrupt even the most carefully planned operations. Snow, ice, and freezing conditions can delay shipments, close roads, and even temporarily force businesses to shut their doors. These conditions can also pose serious risks to employee safety, especially when commuting to work becomes hazardous. As a result, employers must have a strategy in place that not only keeps the business running smoothly but also ensures the well-being of their staff.
An inclement weather policy is a set of guidelines and procedures designed to help businesses respond effectively to poor weather conditions, natural disasters, and emergencies. These policies typically include protocols for temporary closures and how to handle scheduling and pay during inclement weather events. By establishing such a policy in advance, businesses can create a clear, consistent framework for handling winter challenges, reducing confusion and ensuring that both employees and employers are on the same page.
Key Components of an Effective Inclement Weather Policy
A well-crafted inclement weather policy should cover a variety of factors to ensure that businesses can continue to operate effectively while also protecting their employees.
Below are five key components that every business should include:
1. Clear Expectations for Staff
One of the primary purposes of an inclement weather policy is to establish clear expectations for employees during winter disruptions. This includes defining work arrangements, outlining how employees should communicate absences, and detailing how time missed due to weather will be handled. By setting these expectations early on, businesses can avoid confusion and ensure everyone is aligned on what to do during a snowstorm or other disruptive weather event.
2. Employee Safety and Wellbeing
Employers should always prioritize employee safety and well-being, particularly during winter when weather-related hazards are common. An inclement weather policy should include clear guidelines for when it’s unsafe to travel or work. These guidelines can help mitigate the risks posed by icy roads, snowstorms, and other dangerous conditions, reducing the likelihood of accidents or injuries among staff.
3. Minimizing Disruption to Business Operations
Even when the weather is less than ideal, most businesses need to continue operating. An inclement weather policy should help minimize disruptions by providing a clear plan for handling business closures or delays. For instance, the policy may outline how to communicate with clients and customers about temporary closures and procedures to ensure that essential services continue. A structured approach to these challenges helps businesses maintain continuity even in difficult conditions.
The Benefits of Proactive Winter Preparedness
A solid inclement weather policy protects employees and enhances the business’s overall resilience. By preparing for winter disruptions in advance, companies can respond swiftly and effectively when the unexpected happens. This proactive approach ensures that businesses are better equipped to handle snowstorms, icy conditions, and other seasonal challenges without significant losses in productivity or revenue.
A well-prepared business can maintain a positive reputation by demonstrating care and responsibility toward its employees. By prioritizing safety, clear communication, and business continuity, companies can build trust and loyalty with their staff, customers, and clients. This can ultimately strengthen the business in the short and long term, helping it thrive even in the harshest winter conditions.
Winter presents a host of challenges for businesses, but with the right strategies, these obstacles can be managed effectively. Businesses can confidently navigate winter disruptions by implementing an inclement weather policy that addresses employee safety and operational continuity. With proactive planning and a commitment to preparedness, businesses can weather the storm and continue serving their customers and clients, no matter the weather.
Peninsula has been helping businesses with HR and health and safety compliance for 40 years. We are now trusted by over 120,000 SMB owners across the globe. In Canada, we support over 6,500 businesses in eight provinces, providing a service tailored to your business needs. Clients benefit from access to our 24/7 employer HR and OHS adviceline and coverage on legal through our Peninsula Protect Plus service promise. For more information, please visit www.peninsulagrouplimited.com/ca
BRIDGING TRADITION AND INNOVATION
APRIL 4-5, 2025
Delta Toronto Airport Hotel & Conference Centre
Technorama 2025 will focus on the integration of traditional analog techniques with cutting-edge digital technologies in dental labs and denture clinics. While preserving the craftsmanship of analog workflows, let’s embrace the precision, efficiency, and innovation brought by digital tools. WHAT YOU CAN EXPECT:
• Elevated education
• Access to industry experts
• No change in show times
• Entertainment
• Networking and More…
JOIN US AS WE BRING COLLABORATION, EDUCATION AND FUTURE READINESS TO DENTAL LAB PROFESSIONALS
The Biggest Hurdles to Success in Dental Labs (and What to Do About Them)
Janice Wheeler, President & CEO – The Art Of Management Inc.
Running a dental lab is no small feat. You’re not just dealing with teeth and technology; you’re navigating a business landscape that’s becoming more competitive every day. While dental labs play a critical role in patient care, they face unique challenges that can make or break their success. In this article, we’ll explore some of the biggest hurdles dental labs face and actionable solutions to overcome them.
1. Keeping Up with Rapid Technological Advancements
In recent years, the dental industry has experienced a surge in technology, from CAD/CAM systems to 3D printing. While these tools offer more precision and efficiency, they come with a steep learning curve and hefty price tags. Dental labs that can’t keep pace with technological changes risk falling behind their competitors.
What to Do About It: Invest in Education, Not Just Equipment
Before shelling out big bucks on the latest technology, ensure your team has the training and skills needed to make the most of it. Consider sending your staff to workshops, webinars, or industry events where they can stay updated on new trends.
Build a culture of continuous learning so your lab doesn’t just have the best tools but also the best team using them.
If budget constraints make upgrading difficult, leasing equipment or partnering with other labs to share costs might be a practical alternative.
2.
Maintaining Consistent Quality in High-Volume Workflows
Dental labs often juggle multiple cases at once. As the workload increases, maintaining consistency can become a challenge. Even minor errors in crowns, bridges, or implants can lead to costly remakes, dissatisfied clients, and damaged reputations.
What to Do About It: Implement Quality Control Processes
Standardize your workflow to ensure each case gets the same level of care and attention. Implement quality control checks at each stage of production, from initial impressions to the final product. Designate team members to oversee these checks to catch errors before they reach the client.
Automation can also help maintain consistency. Many dental labs are turning to digital systems that reduce human error and standardize production. While this doesn’t
replace skilled technicians, it can serve as an extra layer of precision.
3. Managing Turnaround Times and Meeting Deadlines
Dentists rely on timely delivery from their lab partners. Delays can lead to rescheduled patient appointments, frustrated dentists, and, ultimately, loss of business. However, with increasing workloads and unexpected hiccups, maintaining fast turnaround times is easier said than done.
What to Do About It: Streamline Communication and Planning
One of the best ways to ensure smooth operations is by streamlining communication with the dental practices you work with. Use project management tools or client portals that provide real-time updates on case statuses. Clear communication about deadlines can help manage expectations and minimize the risk of surprise delays.
Internally, focus on better scheduling. Anticipate bottlenecks and allow for buffer times in your workflow to accommodate emergencies or larger, more complicated cases. A solid workflow management system will help ensure that deadlines are met without sacrificing quality.
MANAGEMENT TIPS
4. Balancing Costs and Pricing
The dental lab business is fiercely competitive. Many labs struggle with finding the right balance between offering competitive pricing and maintaining profitability. With the rising costs of materials, equipment, and labour, it can be challenging to keep prices low while still making a profit.
What to Do About It: Focus on Value, Not Just Price
Instead of competing solely on price, position your lab as offering superior value. Highlight your lab’s quality, reliability, and customer service. Dentists will pay a premium for work that consistently meets or exceeds their expectations, especially when remakes are less frequent. Sales training (such as we, The Art of Management Inc., offer) can save you millions of lost income
waste that can be eliminated to improve margins without sacrificing quality.
5. Finding and Retaining Skilled Technicians
The dental lab industry is facing a shortage of skilled technicians, and this talent gap poses a significant challenge to lab owners. Finding qualified technicians who can handle the increasing demands of modern dentistry is becoming more difficult.
What to Do About It: Prioritize Training and Build a Strong Culture
If hiring experienced technicians is a challenge, consider investing in training for less-experienced hires. Create a mentorship program where senior technicians can pass on their knowledge to newer team members. This approach not only helps
and a sense of community can go a long way in retaining top talent. (Again, The Art of Management can train you as an executive and CEO to elevate your lab to higher ranges.)
Conclusion
By focusing on solutions rather than obstacles, dental labs can turn these hurdles into opportunities for growth and innovation. Just remember, the future of your dental lab doesn’t rest solely on the tools you buy but on the team you build and the processes you create to deliver exceptional work. Staying agile and proactive in addressing these common issues will help your lab thrive in an increasingly competitive industry.
24-DGSH-162 DWX-53D Dental Tech Today Ad FA.pdf 1 11/5/24 2:23 PM
Innovation Built from the Outside in...
Dry Milling Solution
DGSHAPE’s Flagship Just Got an Upgrade!
Outside-In…novation from DGSHAPE looks at solving the needs of dental businesses and anticipating market opportunities.
Here’s a look inside:
• Grip the Future - Upgraded, more robust spindle for 1.5x tool gripping power over the previous DWX-52D Plus model for more e cient, predictable milling of PMMA applications.
• Speed Matters - Up to 20% Faster PMMA & Zirconia Milling Speeds.
• Open Edge Adapter - Enables advanced 90°+ milling capabilities to reproduce 100% of the case design. Ideal for milling of large full-arch and/or highly-esthetic cases.
• See What the Future Mills - Built-in web camera for real-time mill monitoring anytime from anywhere.
To discover more, please visit www.rolanddga.com/DWX-53D
JANICE WHEELER is the President and
3
ADTO Gala Recap
At ADTO’s Great Gatsby Gala, held at the magnificent Casa Loma in Toronto, we took a step back in time and immersed ourselves in the opulence and glamour of the roaring twenties.
The festivities commenced with delicious hors d’oeuvres and a spectacular cocktail hour, emphasizing our twenties theme. Attendees were transported to an era of elegance and sophistication, enjoying exquisite cuisine and live performances.
The ADTO presented the prestigious Fellowship Award to Paul Karolidis RDT, DD, for his dedication to the industry of Dental Technology and reaching a 25-year tenure as a professor at GBC. New members were officially welcomed to the ADTO and presented with their respective certificates. This enchanting evening promised an unforgettable experience for many, but we could not have made it happen without our system partners.
We want to thank Central Dental, Ivoclar, and VITA North America for their continuous support of the dental technology industry, which created promising memories that will last a lifetime.
VITA VIONIC® DENT DISC multiColor
Composite milling discs for tooth elements in final partial and full dentures.
Quality Material
Flexibility
Abrasion resistant for durable denture teeth. Simple, safe processing. Compatible with conventional milling systems.
Finalizing and individualizing VITA AKZENT® LC
Esthetics
Integrated shade gradient for a more natural effect. Good polishing characteristics.
Light-Curing stain and glaze system for extraoral characterization of dentures made of hybrid ceramic, CAD/CAM and veneering composites, denture bases, 3D-print acrylic polymers and prefabricated teeth
CANDULOR:
Th e Personal Prosthetics Specialists from Switzerland
©CANDULOR – Reproduction/publication free of charge, subject to citation of the image source
programs and provides a
CANDULOR has been offering high-quality materials for dental technology needs since 1936. In particular, the Swiss manufacturer is known for its esthetically sophisticated tooth lines and high-quality resins, especially the shade 34. The product system can fabricate restorations that resemble a natural dentition very closely, thus giving patients a high quality of life. CANDULOR also regards itself as a prosthetics specialist committed to transferring knowledge in partnership with laboratories and practices. The Swiss School of Prosthetics by CANDULOR (SSOP) was founded on this fundamental value, with which the Swiss company aims to bring sound specialist knowledge and practical know-how to dental laboratories and practices worldwide to increase quality and efficiency.
An Interesting Niche for Dental Laboratories
Full dentures are a very demanding discipline within the dental world. They are often underestimated due to a lack of knowledge or a mainstream orientation. Nonetheless, this field promises to be an interesting niche with great potential, provided the relevant expertise is available.
On this topic, CANDULOR offers dental laboratories and denturists a comprehensive prosthetic system for partial, full, and implantsupported patient restorations, including tooth lines, denture resins, auxiliary materials, and dental equipment for registration and articulation.
Since 2023, the manufacturer of system prosthetics has also included disks for the digital and hybrid workflow in its range.
With the Swiss School of Prosthetics (SSOP), CANDULOR fills an important gap in the range of continuing education
fundamental, comprehensive transfer of knowledge on the subject of prosthetics.
CANDULOR:
The Personal Prosthetics
Specialists from Switzerland
Thibaut Van den Bossche (Country Development Manager Europe and North America at CANDULOR) views the developments in the market as follows, “It is not only in the North American market that we are seeing conventional working methods increasingly being superseded by digital technologies. Everyone is curious and evaluating, but few dare to switch completely. We often see that the conventional and the digital have their place side by side in the laboratories. Owing to CANDULOR’s comprehensive range, we always offer dental laboratories the right material, regardless of which stage of the digitization process they are.”
Prosthetic Solutions with High Standards for Natural Beauty
The foundation stone for this was laid over 80 years ago, when entrepreneur Alfred Wilhelm Steen and tooth engraver Wilhelm Karl Zech founded the Steen & Zech Zahnfabrik in the heart of Zurich, Switzerland, on November 1, 1936. In only a short space of time, the company became one of the most renowned manufacturers of teeth in Central Europe. In the post-war period, up to 300 employees were at times involved in the success.
An important contributing factor was the revolutionary and highend Swiss quality, which has since manifested itself in a large number of successful tooth shapes and materials. After Wilhelm Karl Zech sold his shares to his partner, the company was renamed CANDULOR AG in the 1960s. The high demands we place on ourselves, and the quest for naturalness resulted in a legend for the brand. To replicate the gingiva as realistically as possible, special semi-opaque stains of the resins were developed for the first time, which refract and reflect incident light so that even artificial gums appear in their natural pink tones. The introduction of the AESTHETIC resins heralded the creation of the legendary shade 34 and today’s AESTHETIC Colour Set Easy for characterizing the gingiva.
Understanding Customer Needs and Processes
Then as now, close customer relationships remain the focus of this manufacturer’s business partnerships. This is reflected by flat hierarchies, respectful interaction, advice, and solutions tailored to the individual customer. An in-depth understanding of individual customer needs is also key for sales consultants; as Thibaut Van den Bossche explains further, “The most important thing is that I know the customer’s processes and requirements in detail so that I can give them the best possible advice. Here, it is very important to us that we approach things in the laboratory with a high level of empathy – I am a dental technician and can, therefore, speak to our customers on an equal footing.”
Designing Individual Dentures
Working with a diverse range of products adds new dimensions to everyday laboratory routines. With its PhysioSet TCR tooth line, CANDULOR offers 48 tooth moulds, including 18 special X-moulds, with which highly individual prosthetic solutions can be realized. The PhysioSelect TCR tooth line primarily stands for tooth shapes in a fresh, youthful design, which perfectly reflects the lifestyle of the ‘Best Ager’ generation. Both tooth lines are made of highly resistant TwinCrossedResin material (modified PMMA variant) – a dental material for very high plaque and abrasion resistance* requirements. Both tooth lines are available in 16 A-D shades and 2 Bleach shades, whereas the PhysioSet TCR is additionally available in 9 CANDULOR shades.
A range with three disks is also offered for CAD/CAM-supported fabrication: the high-impact XPLEX material is available as a disk for the denture bases. Three denture shades are available (1, 5, and 34), which correspond to the shades of the existing XPLEX denture material. This allows the laboratory to choose the material that best
The CANDULOR Management Team (from left to right): Danijel Stojanovic (Finance Manager), Alexander Schwaszta (Director of QM/RA/PRRC), Claudia Schenkel-Thiel (Managing Director), Doris Nägeli (Director P&C), Alexander Ewert (Director Marketing & Education).
CAD/CAM materials to articulators and auxiliary materials. All materials – analog or digital – are compatible with each other and thus enable a consistent solution.”
Knowledge For Greater Success in Prosthetics
In times of digitization, different levels of know-how among employees pose particular challenges for dental laboratories, especially in the demanding discipline of full dentures. This is where the Swiss School of Prosthetics (SSOP) fills an important gap in the continuing education offering. Founded in Switzerland, the school
“It is very important to us that we approach things in the laboratory with a high level of empathy - I myself am a dental technician and can therefore speak to our customers on an equal footing,” says Thibaut Van den Bossche (Country Development Manager Europe & North America at CANDULOR), emphasizing CANDULOR’s focus on a personal customer relationship.
CANDULOR offers a comprehensive prosthetic system to create solutions that are virtually indistinguishable from natural teeth in terms of esthetics and function.
AN
IMPORTANT
CONTRIBUTING
FACTOR WAS THE REVOLUTIONARY AND HIGH-END SWISS QUALITY , WHICH HAS SINCE MANIFESTED ITSELF IN A LARGE NUMBER OF SUCCESSFUL TOOTH SHAPES AND MATERIALS.
only in terms of our products, which we have adapted to the North American market with 18 additional tooth shapes. But above all,
CANDULOR. HIGH-END ONLY.
*Abrasion resistance, clinical study over two years; plaque resistance measured in the laboratory.
CANDULOR stands for high-end prosthetics in the field of partial, full and implant-supported restorations. The dental company, headquartered in Switzerland, was founded in 1936 and offers a complete prosthetic system for dental technicians and prosthodontists. CANDULOR products are used in high-quality prosthetics that combine aesthetics, design, and functionality and meet the most demanding requirements for quality and individuality. With the unique SSOP training concept, CANDULOR contributes significantly to maintaining, sharing, and further developing prosthetic expertise and practical know-how in the dental industry. Today, CANDULOR has 65 employees and operates worldwide, in part directly and in part through a network of distribution partners. For more information about CANDULOR, visit www.candulor.com.
CANDULOR offers a comprehensive prosthetic system to create solutions that are virtually indistinguishable from natural teeth in terms of esthetics and function.
PhysioSet TCR is a tooth line with 48 tooth molds including 18 X-molds specially adapted to the US market, which can be used to realize highly individual prosthetic solutions.
2025 BUYERS’ GUIDE
Welcome to the 14th annual Dental Technology Today Buyers’ Guide. When making purchasing decisions about products and services in the dental technology industry throughout British Columbia and Ontario, please support the companies whose advertising makes Dental Technology Today possible. This Buyers’ Guide consists of two sections: a categorical listing of products and services, including a list of companies that provide them, and an alphabetical listing of all the companies appearing in the Guide. This alphabetical listing includes the company’s name, contact information, and website.
CATEGORICAL LISTING
EQUIPMENT
3D PRINTERS
DGSHAPE, A Roland Company
Renfert USA
Unique Dental Supply Inc.
AIR ABRASION UNITS
Central Dental Ltd.
Zahn Canada, A Division of Henry Schein Canada
AIR PURIFIERS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ARTICULATORS AND ACCESSORIES
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
AUTOCLAVES
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BURNERS, ELECTRIC AND GAS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BURNOUT TRAYS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CAD/CAM
Central Dental Ltd.
DGSHAPE, A Roland Company
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
CALIPERS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CASTING, MACHINES AND ACCESSORIES
Central Dental Ltd.
BEGO Canada Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canad
CLEANERS, AIR, AIR/WATER, STEAM, ULTRASONIC
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
COMPUTER, HARDWARE, SOFTWARE
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CURING UNITS, LIGHT, WATER PRESSURE AND HEAT, VACUUM
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
DENTAL MILLING MACHINES
DGSHAPE, A Roland Company
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canad
DENTURES, ACRYLIC PROCESSORS, FLASKS, INJECTION MOLDING, PRESSES
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
DUST COLLECTORS AND CABINETS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ELECTROFORMING AND ELECTROPLATING EQUIPMENT AND ACCESSORIES
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
FACEBOWS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
FURNACES, BURNOUT, PORCELAIN, PRESSABLE, VACUUM
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
FURNITURE
BEGO Canada Inc.
Central Dental Ltd.
Zahn Canada, A Division of Henry Schein Canada
GAUGES AND CALIPERS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
HANDPIECES, ELETRIC, BELT, AIR-DRIVEN, MICROMOTORS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
INVESTING UNITS AND ACCESSORIES
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
KNIVES
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
LAMPS AND LIGHTING
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MAGNIFYING EQUIPMENT
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MILLING MACHINES AND INSTRUMENTS
DGSHAPE, A Roland Company
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MIXERS, VACUUM AND INVESTING
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PALETTES, PORCELAIN
Central Dental Ltd.
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PIN SETTING SYSTEMS AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PLASTER, BINS, NIPPERS, TRAPS, SPATULAS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
POLISHERS AND GRINDERS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
POSTS
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PRESSURE POTS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PUMPS, VACUUM
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
SAFETY EQUIPMENT
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SANDBLASTERS AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SAWS AND ACCESSORIES
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SHADE GUIDES
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
SOLDERING EQUIPMENT AND ACCESSORIES
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SPLASH HOODS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
STUDY MODELS
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SUCTION DRAWERS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
TORCHES
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
TRIMMERS, MODEL AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
VIBRATORS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
WATER BATHS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
WAXING EQUIPMENT AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MATERIALS
ACRYLICS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ADHESIVES, BONDING AGENTS, CEMENTS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
ALGINATES
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ALLOYS, CERAMIC, CROWN & BRIDGE, IMPLANT, DENTURE, TITANIUM
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CASTING, FLUX, SOLDER
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CEMENTATION
Ivoclar Vivadent Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
CERAMICS
Central Dental Ltd.
Ivoclar Vivadent Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
COMPOSITE RESINS
Central Dental Ltd.
Ivoclar Vivadent Inc.
VITA North America
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
DENTURE CARE
Central Dental Ltd.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
DENTURES, FULL AND PARTIAL
BEGO Canada Inc.
Ivoclar Vivadent Inc.
VITA North America
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
DUPLICATING MATERIALS
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ETCHING, GELS AND LIQUIDS
BEGO Canada Inc.
Central Dental Ltd.
Dental Works
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
IMPLANTS, ATTACHMENTS AND SYSTEMS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
IMPRESSION MATERIAL
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
INVESTING, CROWN & BRIDGE, HIGH AND LOW HEAT
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MODELLING LIQUID
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
MOUTHGUARD MATERIAL
Central Dental Ltd.
Unique Dental Supply Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
NIGHT GUARD AND SPLINT MATERIALS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
OPAQUERS, ACRYLIC, PORCELAIN, SPRAY OPAQUERS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ORTHODONTIC, MATERIALS AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
POLISHING COMPOUNDS AND PASTES
BEGO Canada Inc.
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PORCELAIN SYSTEMS AND KITS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SEALERS AND SEPARATORS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SOLDERING MATERIALS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
TEMPORARY MATERIALS, CROWN & BRIDGE
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
VOCO Canada
Zahn Canada, A Division of Henry Schein Canada
VACUUM FORMING MATERIALS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
WAX
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
ZIRCONIA
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
CLICK HERE TO RETURN TO TABLE OF CONTENTS
SUPPLIES
ABRASIVE, DISCS, SLEEVES, CAPS, POINTS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ARTICULATING, FILM, PASTE, PAPER, LIQUIDS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BLASTING COMPOUND
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BOIL-OUT SOLVENT
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BRUSHES, CERAMIC
Central Dental Ltd.
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
BURS AND ACCESSORIES
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CASTING RINGS
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
CLOTHING
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
DEBUBBLIZERS
BEGO Canada Inc.
Central Dental Ltd.
Ivoclar Vivadent Inc.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
DIAMONDS, DISCS AND WHEELS
BEGO Canada Inc.
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
DOWEL PINS AND ACCESSORIES
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
EPOXY, DIE
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
EYEWEAR, PROTECTIVE
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
FELTS, POLISHING
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
FIRING PEGS AND TRAYS
Central Dental Ltd.
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
VITA North America
Zahn Canada, A Division of Henry Schein Canada
FOIL
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
FORMERS, MODEL
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
GLASS BEADS
BEGO Canada Inc
Central Dental Ltd.
Ivoclar Vivadent Inc.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
GYPSUM, DIE
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
INFECTION CONTROL
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ALPHABETICAL LISTING
BEGO Canada Inc.
800-463-2680 info@begocanada.com www.begocanada.com
Central Dental Ltd.
800-268-4442 joe.smith@centraldentalltd.com www.centraldentalltd.com
DGSHAPE, A Roland Company
800-542-2307 dental@rolanddga.com www.dgashapeamericas.com
LUBRICANT, MODEL AND DIE
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MIXING BOWLS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MODEL, HARDENER, GLOSS, SPACERS, GLAZE
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MODELS AND MOLDS, ANATOMICAL, EDUCATIONAL
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
MOLDS FOR WAX PATTERNS
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
OCCLUSAL INDICATORS AND SPACERS
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
ORTHODONTIC SUPPLIERS
Central Dental Ltd.
Renfert USA
Zahn Canada, A Division of Henry Schein Canada
PATTERNS, WAX, BAR, PLASTIC, CLASP
BEGO Canada Inc.
Central Dental Ltd.
Renfert USA
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PLASTER
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
PRESCRIPTION FORMS
Unique Dental Supply Inc.
PUMICE
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SILICONE SPRAY
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SOAPS, HAND
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SOLVENTS, ACRYLIC, METAL, CERAMIC
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
SPRUCES, PLASTIC
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
STONE, MODEL
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
STRIPPING AGENT
Central Dental Ltd.
Zahn Canada, A Division of Henry Schein Canada
ULTRASONIC SOLUTIONS
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
WIRE
BEGO Canada Inc.
Central Dental Ltd.
Unique Dental Supply Inc.
Zahn Canada, A Division of Henry Schein Canada
Ivoclar Vivadent Inc.
800-263-8182 www.ivoclarvivadent.com
Renfert USA
800-336-7422
sales@renfertusa.com www.renfert.com
Unique Dental Supply Inc. 905-532-0554 orders@udscanada.com www.udscanada.com
VITA North America
800-263-4778 info@vitanorthamerica.com www.vitanorthamerica.com
VOCO Canada
888-658-2584 infousa@voco.com www.voco.com
Zahn Canada, A Division of Henry Schein Canada
905-646-1711
800-496-9500 info@zahncanada.ca www.zahncanada.ca
Articulator CA 3.0 LARGE –
Synchronization
he CANDULOR
Tsynchronization system is characterized by its high precision and allows the CA 3.0 LARGE articulator to be synchronized with the Artex®articulators.
This offers major advantages, particularly for collaboration in the laboratory or between the laboratory and practice, because synchronizing the articulators ensures:
• Greater efficiency and cost-effectiveness in the dental workflow.
• Simplification of work processes, as the models can be passed between the laboratory and practice without the articulator.
• Fewer sources of error because synchronizing the articulators can help avoid transcription errors. For more information, please visit https://candulor.com/en/product-portfolio/ devices/articulators.
*Compatible with Artex BN, Artex CN, Artex CT, Artex CPR, Artex CR; Splitex® and Artex® are registered trademarks of Amann Girrbach GmbH, 75177 Pforzheim, DE.
VITA Introduces the New VITA VACUMAT® 6100 M Furnace
VITA has announced the addition of the VITA VACUMAT® 6100 M to its line of tried and tested furnaces. The new VITA VACUMAT 6100 M is a fully automatic, microprocessorcontrolled firing unit ideal for all dental firing ceramic requirements.
The optimized electronics enable even more precise results, ensuring a consistently high quality of dental work and increased laboratory efficiency. The simple operation, the preinstalled programs, and the spacesaving design have all been retained. The new furnace impresses with superb quality and aesthetics and offers outstanding firing results, user safety, and convenience. Thanks to its ergonomically optimized design, the furnace requires only a minimal footprint. Two integrated cooling trays support the safe storage of fired objects.
Innovative new materials are used in the VITA VACUMAT 6100 M combustion chamber to ensure even more homogeneous heat distribution. A durable firing muffle and reliable electronics provide consistently excellent firing results. The furnace also offers a wide range of monitoring and service programs – automatic temperature
adjustment before every start, temperature and vacuum control and a counter for operating hours of firing muffles – that maximize working comfort, safety, and efficiency. A new feature, the linear cooling with simulation of the object temperature, ensures safe and precise firing results by providing even and controlled cooling.
VITA is a leading provider of innovative dental products. The company pioneered tooth shade determination with the development of the world-renowned
VITA classical A1-D4® shade guide and its proprietary VITA SYSTEM 3D-MASTER®, the first and only system of its kind to cover the complete range of natural tooth shades. From premium denture teeth and veneering materials to digital shade measurement, furnaces, and CAD/CAM restorations, VITA helps laboratory technicians and clinicians deliver high-quality, esthetic results to patients quickly and efficiently.
For more information, visit www.vitanorthamerica.com or call 800-828-3839.
CLASSIFIEDS
British Columbia
Career Opportunities
CAD/CAM Dental Technician
Coquitlam
Our dental lab is looking for a full-time dental technician with experience operating CAD/CAM scanners (3Shape or Exocad), designing full crowns, bridges, implants, and fitting zirconia. Minimum two years of experience. Training will be available for further skill improvements. Able to read, understand and speak English. Willing to learn new techniques and work with minimum supervision. If you are interested, please email your resume to jobs.solarisdental@gmail.com.
CAD/CAM Technician
Langley
Davinci Dental Lab in Langley is looking for an experienced CAD/CAM technician familiar with 3Shape or Exocad software for designing single to multiple-unit crown and bridge and implant cases. Salary will depend on the personal level of experience and competency. Extended health and dental benefits are offered after three months, and group RRSP is offered after one year. For more information, please email focusdavinci2015@gmail.com.
CAD/CAM Technician
Nanaimo
Robertshaw Dental Lab in Nanaimo is looking for an experienced technician who is familiar with 3Shape software and is looking to join our team in an environment concentrating on excellence in an upbeat, fast, fast-paced workforce. Competitive salaries are available depending on experience. Benefits start up after three months of being employed. For more information, please send an email to nathan@robertshawdental.com.
CAD/CAM Technician and Business Partner
Burnaby
Dental lab looking for a CAD/CAM dental technician, who can be a business partner. Located in Burnaby, BC. For more information, please contact William Kim at 778-833-4858.
Dental Lab Technician Assistant
Coquitlam
We are a dental lab looking for a full-time dental lab technician assistant with a minimum of two years of dental lab experience. Duties include fitting and shaping zirconia and eMax crowns. Willing to learn new techniques. Work with minimum supervision. Able to read, understand, and speak English. We offer health benefits after one year of employment. If you are interested, please email your resume to jobs.solarisdental@gmail.com.
Dental Technician
Kelowna
Orthotec Dental Lab is expanding its team and accepting applications for a full-time dental technician position. We are seeking candidates with proven experience in the orthodontic field, including skills in wire bending, acrylic work, and model pouring and trimming. Proficiency in 3D design and printing, with experience using software such as Meshmixer and OrthoCAD, is an asset. While experience is necessary, we also provide training to help you further develop your skills. Fluency in English is essential for this role. Please send your resume and reference information to orthotecdentallab@hotmail.com.
Denture Technician
Victoria
Turner Dental Laboratory is looking for a permanent, full-time denture technician for the Victoria, BC, location. The ideal candidate is proficient in denture tooth set-up and wax-up of dentures for try-in and finish, must have experience in a dental laboratory, is a team player, and is confident working under deadlines. Duties include waxing, setting teeth, relines and repairs, and other tasks as requested. A grade 12 diploma or licensure with BC College of Dental Technicians is required. Registration as a dental technician in BC is an asset but not required. Must be dependable, responsible, proficient with reading and writing English, and be eligible to work in Canada. Excellent manual dexterity, communication, and interpersonal skills are required. Potential for immediate start date. Email your resume in confidence to doug@turnerdentallab.com.
Digital Dental Technician Richmond
Artistic Dental Ceramic is seeking an experienced digital technician to join our team. The laboratory is located in Richmond, BC, two blocks from the Canada line SkyTrain for easy commute. We need a digital dental technician experienced with 3Shape or Exocad who can design posterior and anterior teeth and implant cases. Must be willing to learn new skills and techniques. At least five years of dental laboratory experience, dental education and training is a plus. Proficient in either 3Shape or Exocad for the following: Designing crowns, bridges, implants, and splints. Designing dentures and partials is a plus (or a willingness to be trained). Interested in learning new skills, software, and technology. Ability to get along and help others. Ability to read and understand dental prescriptions. Able to follow directions and communicate through written and verbal methods. Please submit your resume to apply.artistic@gmail.com
Note: We will require work and personal references during the interview, and you must be a Canadian resident. We encourage you to learn more about us on our website at www.artisticdentalceramic.com
CLASSIFIEDS
For Sale
Bego Fornax T: DOC 86107-en/01 Casting Machine for Sale
Richmond
Bought new in 2020 from Bego Fornax T: DOC 86107-en/01. Used just once. Price: $8,000 OBO. To see a picture, visit https://dtabc.ca/ picture-for Interested inquiries, contact adcsimply@gmail.com.
Crown and Bridge Lab for Sale
Vancouver Island/Comox Valley
Dental lab for sale on Vancouver Island, located in the Comox Valley. Fully digital, including 3Shape and Mill-box software, Scanner, mill, sintering furnace, Formlab 3D printer, porcelain furnaces, eMax press EP3000, etc. Price: $60.000 OBO (equipment and supplies only). Actual lab space not included must be moved to a new location! For more information, please email roystondentalceramics@shaw.ca.
Dental Lab for Sale
Chilliwack
Looking for an excellent investment opportunity in the thriving city of Chilliwack? This well-established dental lab is family-owned and operated, established in 2008, comes equipped with materials, supplies, and is turn-key. With a long-term loyal customer base and a proven track record of success, Magnus Dental Lab presents a rare and exciting opportunity for anyone looking to break into the dental lab market. Exponential growth and opportunities in many aspects, from marketing to upgrading advanced digital systems. Asking price is $14,900. Inquire today for more information to Serena Laye Personal Real Estate Corporation. Call 604-703-5888 or email serenalaye@hotmail.com.
Dental Lab for Sale
Vancouver
Due to retirement, a crown and bridge dental lab is for sale in Vancouver near Central Park. The physical location of the lab has three separate rooms, approximately 659 sq/ft. It is suitable for a 4-5 person lab. It is an excellent location and a dental office with multiple dentists is next door. This is the perfect opportunity for a dental technician looking for a future in this field. This sale would include the transfer of leasing rights as well as the equipment and materials. The asking price is very reasonable. For more information, please email Masa Okuma at masaokuma@shaw.ca
Dental Laboratory with a Strong Client Base and City Centre Location for Sale
Vancouver
Evaluation info and asking price will be shared only with serious buyers. The seller’s identity will be kept confidential until serious prospects are identified. Only inquiries that are clear about purpose, viability, and intentions will receive a response. All inquiries will be treated with absolute confidentiality. Over 20 years in business with a strong client base in the same area. The average yearly revenue
is $600K, and the facility is fully equipped with 1-3 staff members. The owner wants to sell but is willing to do part-time work during the transition. Great opportunities to grow the business, even in this economy, for someone who will market it well. The owner has nurtured these accounts and has excellent communication with the doctors. This is the perfect opportunity to add to your lab or for a dental technician looking for a bright future in this field! For more information, don’t hesitate to get in touch with us at smdental@live.com.
Wanted
Wanting to Purchase Simplex Articulator
I am looking to purchase Simplex articulators. I will pay up to $250, depending on the condition of the articulator. Please provide an image of the unit and where in Canada you are. Please get in touch with me at gts@duck.com.
Ontario Career Opportunities
Dental
Lab Assistant
Mississauga
Looking for a dental lab technician/assistant to help with various tasks. Candidate should have basic computer skills to help in the digital department. Other duties include fabricating Essix retainers and bending wires for orthodontic appliances. Lab is located in Mississauga. For more information, please contact Daniel Kwok at dankwok7@gmail.com
Dental Technician
Mississauga
We are seeking a dedicated denture technician who is also proficient in crafting Thermo night guards to join our team. As part of our expanding operations, we require a technician who can bring precision, expertise, and a commitment to quality in their work. For more information, please contact Steve Clark at bill.toothtech@gmail.com.
Denture Technician
North Bay
Experience denture technician needed for a busy denture clinic. For more information, please contact Dmitri Iounatanov at dentureservices@icloud.com or 706-492-5407.
Digital Technician
Mississauga
Looking for a digital technician who also has experience fitting frameworks. We are a well-established full-service laboratory in Mississauga, operating for over 30 years. We are looking for an experienced digital technician to join our friendly, knowledgeable team of 20+ employees. Clean, modern lab with benefits included. Inquire today. For more information, contact Davor Medunic at 905-890-0072 or davor@prismdental.com.
Digital/Metal Technician
Mississauga
We are a well-established full-service laboratory in Mississauga, and we have been operating for over 30 years. We are looking for a technician to fit copings, including milled metal, and help with the digital department. Join our friendly, knowledgeable team of 20+ employees. Clean, modern lab with benefits included. Inquire today. For more information, please contact Davor Medunic at davor@prismdental.com or 416-845-2564.
Experienced Ceramist
Mississauga
We are a well-established full-service laboratory in Mississauga, and we have been operating for over 30 years. Looking for an experienced ceramist to join our friendly, knowledgeable team of 20+ employees. Clean, modern lab with benefits included. Inquire today. For more information, please contact Davor Medunic at davor@prismdental.com or 416-845-2564.
Experienced Crown and Bridge or Removables Technician
Barrie
Have you ever considered moving to a community where the rest of the province comes when it’s time to relax? Have you ever considered joining a lab that considers its employees so important that they
VISIT US
alone are the focus of the 1st line in the mission statement? Do you like the idea of living in a community where the concept of home ownership is more than a pipe-dream? Then, consider a move to Image Dental Laboratory. IDL is a full-service, state-of-the-art dental laboratory, and we have our eye on the future. You can be a part of it. If you think you have what it takes to find a place on our team of allstars, then give us a call or email and let’s talk about what your future can look like. For more information, please contact Kevin Wauchope at kevin@imagedentallaboratory.com or 705-726-6301.
For Sale
Complete Ortho Lab Equipment and Supplies for Sale
Stoney Creek
Everything you need and more. To see pictures, please visit https://adto.ca/advert/complete-ortho-lab-equipment-and-supplies-forsale. For more information, please contact Susan Mavrin at smavtop@hotmail.com or 905-912-5173.
Dental Equipment for Sale
Burlington
Lab equipment for sale. Suction hood with fan $450. Yates & Bird Ortho Welder $300. Casting well and torch with regulators $400. Serious inquiries only. For more information, please call 416-402-9900 or email enzoruscitti@hotmail.com
ADVERTISER PRODUCT & SERVICE CENTRE
Dental Technology Today would not be possible without the advertising support of these companies and organizations. Please think of them when you require a product or service. We have tried to make it easier for you to contact these suppliers by including their telephone numbers and websites. You can also go the electronic version at www.adto.ca or www.dtabc.ca and access direct links to any of these companies.
Base Print
– Low stain and plaque affinity
