Collingwood Lighting Wiring & Drivers

Wiring & Drivers

by Collingwood Lighting

Mastering light together collingwoodlighting.com

WIRING & DRIVERS

COMPLEMENTING PRODUCTS

IP RATED CONNECTORS

We offer wiring and drivers suitable for all Collingwood Lighting products so you can expect the same high quality and durability throughout your install.

Our range of IP rated connectors allow your IP rated products to be wired safely, ensuring a water resistant circuit between the product and its power supply. Our waterproof junction boxes have an IP rating of 68, meaning they are submersible from 1.3m to 2m. Gel filled options can be opened and closed, allowing for repeat use. Available for series, parallel, RGBW and straight to mains wiring, and suitable for 2, 3 or 5 core cable, our IP rated connectors ensure that all of our IP rated LED lights can be wired to the same high standard.

PROFESSIONAL FINISH More and more electrical contractors are using din rail enclosures for a neat professional finish to a lighting installation. Choose from a range of din rail mountable power supplies in 350mA, 700mA and 24V.

PSDIN350M 350mA

PSDIN700M 700mA

PSDIN10024 24V

Din rail, mountable driver

Din rail, mountable driver

Din rail, mountable driver

COLOUR CHANGE REMOTES To complement our RGB & RGBW products we offer a range of control systems. Use them to create different lighting zones to control separate areas with a single hand held control, wall mounted control or a smart device App for Android and IOS. If you wish to use your own control system you can using the DMX512 controller.

WC2820WH / WC2820BLK 1 - 4 zones

RC2819 1 - 6 zones

CollingwoodRGBW App 1 - 8 zones

Wall mounted control

Hand held control

Smart device app for Android and IOS

To see a more detailed look at the remotes, wiring and power repeaters for our colour change products take a look at our colour change guide.

DIMMABLE OPTIONS Each installation is unique, with its own individual requirements. Collingwood Lighting’s range of dimmable power supplies gives you this control. Choose from a range of 1-10V, DALI or mains dimming across 350mA, 700mA and 24V. Install Collingwood Lighting products as part of a home automation system or simply use existing cable for a smooth change over to LED from traditional lighting.

Do I want to dim products using DALI?

Does my product have an integrated driver?

Do I want to dim products using 1-10V?

With a DALI system you can set the LEDs to respond to certain zones / rooms. It will dim all of the LEDs on each zone the same amount.

If your product has an integrated mains dimmable driver, no separate driver is required. It is classed as a direct to mains product for easy installation where existing mains cable has been used.

With a 1-10V system all the LEDs connected to the 1-10V dimmer will dim an equal amount. You can link up to 10 power supplies to one dimmer for dimming multiple fittings.

DALI dimming

Mains dimming

1-10V dimming 1

PRODUCTS PER DRIVER CALCULATOR

1/4

PL D

PS DIN

PL

* N DCC u halvmber /350 e th s ar /10 e m e fo -2 axim r 24 8 um V inp PL for ut, DM 12V inp /70 ut 0

PL D

PL D

PS DA L70

PS DIM

PL D

PS DIN

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

700 IVE

PL

7 00

M

I-D R UN

0M

7 00

M7

700

49

0 01

1

3

PL

M 3 50

Rep S/3 lac 50 ed

by P1 S28 8

350 IVE I-D R UN

3 50

0M

0 5 02 M3

* N DCC u halvmber /700 e th s ar 12 e m e fo -24 axim r 24 um V inp PS for ut, 12V DIM inp 9 00 ut

PS DIM

CC

MA

PS DA L35

CC

MA PL D

The table below shows the minimum and maximum of each product that fits onto each driver.

Driver Information Constant Current / Constant Voltage

IP rating Output classification

350mA 350mA 350mA 350mA 350mA 350mA 350mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 900mA

Dimmable

or Mains DALI 1-10V

1-10V

1-10V

Din rail mount

1-10V

Mains

Mains

or Mains DALI 1-10V

1-10V

1-10V

Yes

1-10V

1-10V

Yes

Plug & Play

Yes

Collingwood Downlights

DL120

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

DL130

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Fibre LED Light

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Modules that require housing

LL090A

1

LL030A

2-3

1

RL111

1-2

1-2

1

GL063

1-6

1-6

1-3

1-3

GL064

1-5

1-5

1-2

1-2

1

2

1-3

1-3

1-4

1-4

1-2

1-2

1-6

1-6

1-3

1-3

1-2*

(continued on next page) 2*

GL090

1

GL040

1-6

1-6

1-3

1-3

2*

GL041

1-6

1-6

1-3

1-3

2*

GL050

1-6

1-6

1-3

1-3

2*

GL051

1-6

1-6

1-3

1-3

2*

GL016

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL016 SQ

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL016 F AB

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL021

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL022

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL019 Flood

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL019 Spot

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL019 SQ

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL019 S T

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL019 S TK

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

GL018 C

1-4

2*

DM01

Ground Lights

1-6

2-3

1-2*

024

PS 302

PS 502

PS 100

PS DIN

PS IP1 50

PS IP2 40

PS DIP 6 02

PS DIP 1 00

PS DA L20

24

PS 152

CC

CC

CC

CC

CC

CC

CV

CV

CV

CV

CV

CV

CV

CV

CV

CV

IP20

IP40

IP40

IP40

IP40

IP40

IP65

IP65

IP65

IP65

IP65

IP20

IP20

IP20

IP20

IP20

IP65

IP65

IP66

IP66

IP66

24V

24V

24V

24V

24V

24V

24V

24V

24V

24V

1-10V

1-10V

DALI

4

4

24

50

/35

900mA 350mA 350mA 350mA 350mA 700mA 350mA 350mA 350mA 700mA 700mA

24

PL /IP /70

CC

1 00

PL /IP /70

CC

24

PS 288

CC

4

PL /IP /35

4

24

-9

PL /IP /35

03

-3 01

PLU /7

CC

00

PLU /PP 6/ 3

03

01

3-9

-9

-12

1-9 50

PLU /PP / 35

01

PLU /3

1-9

PL R

CC

01

PS DA L90

0M

-5

-9

To place an order use the driver partcodes below.

1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V †

DALI

Yes Yes

Yes

† Requires a PDCINT1-10V interface to make it 1 - 10V dimmable

1-5

1-9

1-9

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1

1-3

1

1

1-3

1-4

1

1-2

1-2

1-3

1-3

1

1

1-3

1-3

1-4

1

1

1-3

1-3

1-4

1

1

1-3

1-3

1-4

1

1

1-3

1-3

1-4

1

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-3

1 - 30 1 - 60 1 - 100 1 - 200 1 - 200 1 - 300 1 - 480 1 - 120 1 - 200 1 - 400

3

PRODUCTS PER DRIVER CALCULATOR

2/4

PL D

PS DIN

PL

* N DCC u halvmber /350 e th s ar /10 e m e fo -2 axim r 24 8 um V inp PL for ut, DM 12V inp /70 ut 0

PL D

PL D

PS DA L70

PS DIM

PL D

PS DIN

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

PL

700 IVE 7 00

M

I-D R UN

0M

7 00

M7

700

49

0 01

1

3

PL

M 3 50

Rep S/3 lac 50 ed

by P1 S28 8

350 IVE I-D R UN

3 50

0M

0 5 02 M3

* N DCC u halvmber /700 e th s ar 12 e m e fo -24 axim r 24 um V inp PS for ut, 12V DIM inp 9 00 ut

PS DIM

CC

MA

PS DA L35

CC

MA PL D

The table below shows the minimum and maximum of each product that fits onto each driver.

Driver Information Constant Current / Constant Voltage

IP rating Output classification

350mA 350mA 350mA 350mA 350mA 350mA 350mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 900mA

Dimmable

or Mains DALI 1-10V

1-10V

1-10V

Din rail mount

1-10V

Mains

Yes

(continued from previous page)

GL018 SQ GL018 T 1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Wall Lights

OCTOLED

1-2

1-2

1-4

1-2

WL220A

1-3

1-3

1-6

1-3

2*

WL020A BLK

1-3

1-3

1-3

1-3

2*

WL320A

1-3

1-3

1-3

1-3

2*

WL050

1-8

1-8

1-8

1-8

1

1-6*

MC020 S

1-9

1-9

1-5

1-5

1

1-6*

MC010 S

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

MF02 IP

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

MS02 IP

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

ML02

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

ML03

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Strip Lights

LSV03 LSV43 LSC03 LSC43 LSC05 LSC45 LSC83 LEDSTRIP IP

4

1-10V

1-10V

1-10V Yes

GL018 C AB

ML01

or Mains DALI 1-10V

Yes

Plug & Play

Ground Lights

Mains

1-10V

024

PS 302

PS 502

PS 100

PS DIN

PS IP1 50

PS IP2 40

PS DIP 6 02

PS DIP 1 00

PS DA L20

24

PS 152

CC

CC

CC

CC

CC

CC

CV

CV

CV

CV

CV

CV

CV

CV

CV

CV

IP20

IP40

IP40

IP40

IP40

IP40

IP65

IP65

IP65

IP65

IP65

IP20

IP20

IP20

IP20

IP20

IP65

IP65

IP66

IP66

IP66

24V

24V

24V

24V

24V

24V

24V

24V

24V

24V

1-10V

1-10V

DALI

4

4

24

50

/35

900mA 350mA 350mA 350mA 350mA 700mA 350mA 350mA 350mA 700mA 700mA

24

PL /IP /70

CC

1 00

PL /IP /70

CC

24

PS 288

CC

4

PL /IP /35

4

24

-9

PL /IP /35

03

-3 01

PLU /7

CC

00

PLU /PP 6/ 3

03

01

3-9

-9

-12

1-9 50

PLU /PP / 35

01

PLU /3

1-9

PL R

CC

01

PS DA L90

0M

-5

-9

To place an order use the driver partcodes below.

1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V †

DALI

Yes Yes

Yes

† Requires a PDCINT1-10V interface to make it 1 - 10V dimmable

1 - 30 1 - 60 1 - 100 1 - 200 1 - 200 1 - 300 1 - 480 1 - 120 1 - 200 1 - 400 1 - 30 1 - 60 1 - 100 1 - 200 1 - 200 1 - 300 1 - 480 1 - 120 1 - 200 1 - 400 1 - 30 1 - 60 1 - 100 1 - 200 1 - 200 1 - 300 1 - 480 1 - 120 1 - 200 1 - 400 1

1-9

1-9

3 - 12

1

1-2

1-2

1-3

1

1-3

1-3

1-4

1

1

1-3

1-3

1-4

1

1

1-3

1-3

1-4

1

1-9

3 - 12

1-3

1-4 1-2

1-4

1-4

1-4

1

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

1-5

1-9

1-9

3 - 12

1-3

≤ 3m

≤ 6m

≤ 10m ≤ 20m ≤ 20m ≤ 30m ≤ 12m ≤ 50m ≤ 20m ≤ 40m

≤ 3m

≤ 6m

≤ 10m ≤ 20m ≤ 20m ≤ 30m ≤ 12m ≤ 50m ≤ 20m ≤ 40m

≤ 3m

≤ 6m

≤ 10m ≤ 20m ≤ 20m ≤ 30m ≤ 12m ≤ 48m ≤ 20m ≤ 40m

≤ 3m

≤ 6m

≤ 10m ≤ 20m ≤ 20m ≤ 30m ≤ 12m ≤ 48m ≤ 20m ≤ 40m

≤ 1m

≤ 1.8m

≤ 3m

≤ 6m

≤ 6m

≤ 10m

≤ 4m

≤ 15m

≤ 6m

≤ 12m

≤ 1m

≤ 1.8m

≤ 3m

≤ 6m

≤ 6m

≤ 10m

≤ 4m

≤ 15m

≤ 6m

≤ 12m

≤ 3m

≤ 6m

≤ 5m

≤ 10m ≤ 17m ≤ 34m ≤ 34m ≤ 50m ≤ 20m ≤ 80m ≤ 36m ≤ 68m

≤ 10m ≤ 20m ≤ 20m ≤ 30m ≤ 12m ≤ 48m ≤ 20m ≤ 40m

5

PRODUCTS PER DRIVER CALCULATOR

3/4

PL D

PS DIN

PL

* N DCC u halvmber /350 e th s ar /10 e m e fo -2 axim r 24 8 um V inp PL for ut, DM 12V inp /70 ut 0

PL D

PL D

PS DA L70

PS DIM

PL D

PS DIN

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

CC

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

IP20

700 IVE

PL

7 00

UN

M

I-D R

0M

7 00

M7

700

49

0 01

1

3

PL

M 3 50

Rep S/3 lac 50 ed

by P1 S28 8

350 IVE I-D R UN

3 50

0M

0 5 02 M3

* N DCC u halvmber /700 e th s ar 12 e m e fo -24 axim r 24 um V inp PS for ut, 12V DIM inp 9 00 ut

PS DIM

CC

MA

PS DA L35

CC

MA PL D

The table below shows the minimum and maximum of each product that fits onto each driver.

Driver Information Constant Current / Constant Voltage

IP rating Output classification

350mA 350mA 350mA 350mA 350mA 350mA 350mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 900mA

Dimmable

or Mains DALI 1-10V

1-10V

1-10V

Din rail mount

1-10V

Mains

Mains

or Mains DALI 1-10V

1-10V

1-10V

Yes

1-10V

1-10V

Yes

Plug & Play

Yes

Retail Range

RDSL

1

RDSM

1

RDSS

1

SQSL

1

SQSM

1

SQSS

1

Universal Lights

LEDLINE 400 110

1

1-2

1-2

1

1

LEDLINE 400 25X6

1

1-2

1-2

1

1

LEDLINE 400 45

1

1-2

1-2

1

1

1-3

1-3

UL030

1

UL010

1-2*

1 - 10 1 - 10 1 - 6 *

LED LYTE SURFACE

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

LED LYTE IP

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

LED LYTE IP T

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

LED LYTE

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Spike Lights

SL040A

1

SL220A

1-6

1-6

1-3

1-3

SL020A BLK

1-6

1-6

1-3

1-3

SL320A

1-6

1-6

1-3

1-3

SL030

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

1 - 18 1 - 18 1 - 10 1 - 10

1

1-6*

Bollards

BOL LED 1

6

1-6

1-6

1-3

1-3

1-2*

024

PS 302

PS 502

PS 100

PS DIN

PS IP1 50

PS IP2 40

PS DIP 6 02

PS DIP 1 00

PS DA L20

24

PS 152

CC

CC

CC

CC

CC

CC

CV

CV

CV

CV

CV

CV

CV

CV

CV

CV

IP20

IP40

IP40

IP40

IP40

IP40

IP65

IP65

IP65

IP65

IP65

IP20

IP20

IP20

IP20

IP20

IP65

IP65

IP66

IP66

IP66

24V

24V

24V

24V

24V

24V

24V

24V

24V

24V

1-10V

1-10V

DALI

4

4

24

50

/35

900mA 350mA 350mA 350mA 350mA 700mA 350mA 350mA 350mA 700mA 700mA

24

PL /IP /70

CC

1 00

PL /IP /70

CC

24

PS 288

CC

4

PL /IP /35

4

24

-9

PL /IP /35

03

-3 01

PLU /7

CC

00

PLU /PP 6/ 3

03

01

3-9

-9

-12

1-9 50

PLU /PP / 35

01

PLU /3

1-9

PL R

CC

01

PS DA L90

0M

-5

-9

To place an order use the driver partcodes below.

1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V † 1-10V †

DALI

Yes Yes

Yes

† Requires a PDCINT1-10V interface to make it 1 - 10V dimmable

1

1

1

1

1

1

1

1

1-3

1

1-3

3-9

1-3

1-9

1

1-9

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

1-3 1

1-3

1-3

1-3

1-3

1-4

1

1

1-3

1-3

1-3

1-3

1-4

1

1

1-3

1-3

1-3

1-3

1-4

1

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

1-5

1-9

1-9

1-9

1-9

1 - 12

1-3

7

PRODUCTS PER DRIVER CALCULATOR

4/4

Choosing the right power repeater and the right driver.

Colour Change

For all constant current products you will need the PR3011 and for all constant voltage products you will need the PR3002.

Do this for each zone

Once you know how many products you are using in your zone you will be able to use the relevant tables to work out how many power repeaters you will need, and which driver to power them.

LSR05 - Bespoke lengths available Length of Strip per Power Repeater

LED5050RGB - Bespoke lengths available

up to 2m per PR3002

up to 5m per PR3002

up to 10m per PR3002

Wattage Driver Needed

50W

100W

150W

Product (Driver)

PS5024

PS10024

PSIP15024

Length of Strip per Power Repeater

up to 5m per PR3002

up to 10m per PR3002

Wattage Driver Needed

50W

100W

Product (Driver)

PS5024

PS10024

DIMMING INTERFACE & POWER REPEATER COMPARISON

1/1

Interface for dimming

DALI

INR US HC UR RE NT

IP R ATI NG

CO NT RO L

CA SE TEM P. ( TC =

˚C)

DO UB LE INS UL ATI ON EFF ICIE NC Y (% )

˚C) TEM P. ( TA = AM BIE NT

(V) PO WE RF AC TOR

OU TPU TV OLT AG E

OU TPU TC UR RE NT

TYP EO F IN TER FAC E RA TED WA TTA GE (W) INP UT CU RR EN T (M A) INP UT VOL TAG E (V )

For full interface or power repeater specifications visit our website collingwoodlighting.com

(used with driver)

<0.05A

220-240V

12A

24V DC

0.5

-20˚C to 50˚C

65˚C

DALI broadcast dimming

-25˚C to 40˚C

70˚C

1-10V dimming

Yes

80%

IP20

99%

IP20

20A 0.4ms

HAL 104

1-10V for 24V drivers

288W

12A Max

24V DC

Power repeaters for colour change

CO NT RO L

CA SE TEM P. ( TC =

˚C)

˚C) TEM P. ( TA = AM BIE NT

(V) OU TPU TV OLT AG E

OU TPU TC UR RE NT

(V) INP UT VOL TAG E

INP UT CU RR EN T (M A)

RA TED WA TTA GE (W)

CO CO NSTA NS NT TAN CU T V RR OLT EN AG T / E

PDCINT1-10V

(driver required)

Constant Current

4 x 8.4W Max

1.6A Max

24V DC

4 x 350mA

4 x 24V Max

40˚C

70˚C

C100924 / DMX2102

Constant Voltage

39W Channel Max

6.5A Max

24V DC

4 x 1.6A

4 x 24V

40˚C

70˚C

C100924 / DMX2102

PR3011

PR3002

8

Product Code

Max Per PR3011

DL329RGBW

6

SL021CARGB

6

GL007RGBW

2

UL010RGBW

6

GL008RGBW

1

UL030RGBW

2

GL016RGBW

6

UL345CARGB

1

GL040CARGB

6

UL346CARGB

1

GL050RGBW

6

UL347CARGB

1

GL090RGBW

2

WL070RGBW

LL030CARGB

6

LL090RGBW

2

SL220CARGB

6

WL075CARGB

2

2-3

100W

PS10024

WL220CARGB

6

WL021CARGB

6

4-5

150W

PSIP15024

Terminals

4mm2 Max

1.5mm2 Max

Grid dimmer kit PDC/GRID DIMMER

AC CE SSO RIE S

0.08

2 years guarantee

CO NN EC TIO NS

H: 28mm L: 138mm W: 40mm

WE IGH T (K G)

0.1

1 year guarantee

WA RR AN TY

WE IGH T (K G)

Screw terminals 1 x 1-2.5mm2 cable

H: 19mm L: 115mm W: 34mm

WA RR AN TY

PS5024

AC CE SSO RIE S

50W

OU TPU TC AB LE (M)

1

INP UT CA BL E (M )

1

CO NN EC TIO NO UT PU T

Product (Driver)

DIM EN SIO NS (MM )

Wattage Driver Needed

DIM EN SIO NS (MM )

Yes

DIN RA IL M OU NT

/ LO OP OU T LOO P IN

IP R ATI NG

Mains surge, short circuit, over-load & over heating

The products will be powered by power repeaters that require a 24V driver. The table below shows you which driver you need for the number of power repeaters you are using.

Number of PR3011s

PR OTE CTI ON

SEL V

PR OTE CTI ON

LOO P IN

DIN RA IL M OU NT

Max Per PR3011

/ LO OP OU T

Product Code

IP20

Yes

Short circuit & over heating

H: 28.5mm L: 170mm W: 58mm

0.165

Screw terminals < 2.5mm2 cable

5 years guarantee

IP20

Yes

Short circuit & over heating

H: 28.5mm L: 170mm W: 58mm

0.165

Screw terminals < 2.5mm2 cable

5 years guarantee

9

DRIVERS COMPARISON

1/3

20W

INR US HC UR RE NT

PLA Y PLU G&

IP R ATI NG

DO UB LE INS UL ATI ON EFF ICIE NC Y (% )

CO NT RO L

˚C)

˚C) CA SE TEM P. ( TC =

TEM P. ( TA = AM BIE NT

(V) PO WE RF AC TOR

OU TPU TV OLT AG E

OU TPU TC UR RE NT

RA TED WA TTA GE (W) INP UT CU RR EN T (M A) INP UT VOL TAG E (V )

For full driver specifications visit our website collingwoodlighting.com

220240VAC

350mA

30 - 52.5V

>0.95

-25˚C to 50˚C

80˚C

Mains

Yes

>80%

IP20

45A 0.2ms

PLDM35020

25W

0.25A

110-240V

350mA

70V

>0.95

-25˚C to 50˚C

80˚C

1-10V & DALI dimmable

Yes

90%

IP20

20A 0.4ms

25W

0.25A

110 240VAC

350mA

2 - 74V

>0.95

-25˚C to 50˚C

90˚C

1-10V

Yes

>80%

IP20

20A 0.4ms

15W

220-240V

350mA

49V Max

0.98

-25˚C to 50˚C

75˚C

1-10V dimmable

Yes

80%

IP20

5A 0.05ms

15W

220-240V

350mA

53V Max

0.95

-25˚C to 50˚C

75˚C

1-10V dimmable

Yes

88%

IP20

5A 0.05ms

220-240V

350mA

0-14V Max

0.5

40˚C

55˚C

Non dimmable

80%

IP20

15.3A 0.3ms

10-28V DC

350mA

28V

0.55

40˚C

55˚C

Non dimmable

60%

IP20

TBC

220-240V

700mA

13.5V Max

0.55

40˚C

70˚C

Mains

Yes

80%

IP20

15A 0.05ms

TBC

220-240V

700mA

28.6V Max

0.55

-25˚C to 50˚C

80˚C

Mains

Yes

83%

IP20

15A 0.05ms

220240VAC

700mA

12V

>0.95

-25˚C to 50˚C

80˚C

Mains

Yes

>80%

IP20

PSDAL350M

PSDIM350

PLD UNI-DRIVE 350MA

PSDIN350

PLS3501 Replaced by PS288

PLDCC/350/10-28

PLDM/700 3

PLD70049

9W PLDM70011

0.25A

110-240V

700mA

70V

>0.95

-25˚C to 50˚C

80˚C

1-10V & DALI dimmable

Yes

90%

IP20

20A 0.4ms

50W

0.25A

110240VAC

700mA

2 - 71V

0.95

-25˚C to 50˚C

80˚C

1-10V

Yes

80%

IP20

20A 0.4ms

25W

100mA

110-240V

700mA

49V Max

0.98

-25˚C to 50˚C

75˚C

1-10V dimmable

Yes

80%

IP20

5A 0.05ms

220-240V

700mA

46V Max

0.95

-25˚C to 50˚C

75˚C

1-10V dimmable

Yes

88%

IP20

5A 0.05ms

PSDIM700

PLD UNI-DRIVE 700MA

32W

10

15A 0.5ms

50W PSDAL700M

PSDIN700M

Yes

Yes

Yes

Yes

H: 30mm L: 141mm W: 43mm

Mains surge, short circuit, over-load & over heating

Yes

H: 22mm L: 123mm W: 79mm

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

H: 22mm L: 123mm W: 79mm

H: 22mm L: 103mm W: 67mm

0.1

0.1

0.1

0.5-1.5mm2 Max

DM298GRID

WA RR AN TY

AC CE SSO RIE S

OU TPU TC AB LE (M)

INP UT CA BL E (M )

Terminals

Mains grid dimmer

1 year guarantee

0.5-1.5mm2 Max

DM298GRID

4m sync cable

5 years guarantee

SYNC CABLE 4M

Terminals

0.5-0.25mm2 Max

0.5-2.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

0.1

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

Yes

H: 18mm L: 50mm W: 32mm

0.03

Mains surge, short circuit, over-load & over heating

Yes

H: 12mm L: 40mm W: 18mm

0.02

Mains surge & short circuit

Yes

H: 28mm L: 110mm W: 48mm

0.07

Mains surge, short circuit & thermal reset

Yes

H: 30mm L: 141mm W: 43mm

0.075

Open circuit & short circuit

Yes

H: 28mm L: 110mm W: 48mm

0.07

Mains surge, short circuit, over-load & over heating

Yes

H: 22mm L: 123mm W: 79mm

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Yes

H: 36mm L: 70mm W: 90mm

Rising clamp Rising clamp 5mm pitch 5mm pitch

Grid dimmer kit

0.185

H: 22mm L: 103mm W: 67mm

Terminals

Mains grid dimmer

H: 36mm L: 70mm W: 90mm

H: 22mm L: 123mm W: 79mm

CO NN EC TIO NO UT PU T

WE IGH T (K G)

DIM EN SIO NS (MM )

SEL V

PR OTE CTI ON

DIN RA IL M OU NT

/ LO OP OU T LOO P IN

Yes

Mains surge, short circuit, over-load & over heating

Terminals

0.5-4mm2 Max

0.5-2.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

1 year guarantee

Flying leads

0.2

0.2

1 year guarantee

Flying leads

0.3

0.3

Mains grid dimmer

0.3

Mains grid dimmer

Mains grid dimmer

Terminals

Plug & Play

0.15m, 0.75mm2 2 core cable

AWG24 with Plug & Play connector

Terminals

0.5-2.5mm2 Max

0.5-2.5mm2 Max

DM298GRID

DM298GRID

5 years guarantee

DM298GRID

Grid dimmer kit

0.1

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

0.1

Terminals

0.5-2.5mm2 Max

0.5-2.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

0.1

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

0.185

Terminals

0.5-4mm2 Max

0.5-2.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

11

DRIVERS COMPARISON

2/3

10-28V DC

700mA

23.5V Max

0.85

40˚C

55˚C

Non dimmable

70%

IP20

INR US HC UR RE NT

PLA Y PLU G&

IP R ATI NG

DO UB LE INS UL ATI ON EFF ICIE NC Y (% )

CO NT RO L

˚C)

˚C) CA SE TEM P. ( TC =

TEM P. ( TA = AM BIE NT

(V) PO WE RF AC TOR

OU TPU TV OLT AG E

OU TPU TC UR RE NT

RA TED WA TTA GE (W) INP UT CU RR EN T (M A) INP UT VOL TAG E (V )

For full driver specifications visit our website collingwoodlighting.com

PLDCC/700 12-24

50W

0.25A

110240VAC

900mA

2-55V

>0.95

-25˚C to 50˚C

80˚C

1-10V dimmable

Yes

>80%

IP20

20A 0.4ms

50W

0.25A

110240VAC

900mA

2-55V

>0.95

-25˚C to 50˚C

80˚C

1-10V & DALI dimmable

Yes

>80%

IP20

20A 0.4ms

220-240V

350mA

0-24V Max

0.6

40˚C

55˚C

Non dimmable

Yes

>70%

IP40

12.8A 0.6ms

220-240V

350mA

0-36V Max

0.55

40˚C

55˚C

Non dimmable

Yes

80%

IP40

25.5A 0.6ms

220-240V

350mA

0-36V Max

0.55

40˚C

55˚C

Non dimmable

Yes

80%

IP40

Yes

25.5A 0.6ms

220-240V

350mA

0-36V Max

0.55

40˚C

55˚C

Non dimmable

Yes

80%

IP40

Yes

25.5A 0.6ms

100mA

220-240V

700mA

0-36V Max

0.85

40˚C

70˚C

Non dimmable

Yes

80%

IP40

14.9A 0.6ms

100mA Max

220-240V

350mA

36V Max

0.6

40˚C

55˚C

Non dimmable

Yes

70%

IP65

12.8A 0.8ms

150mA

220-240V

350mA

48V Max

0.6

40˚C

55˚C

Non dimmable

Yes

70%

IP65

14.9A 0.6ms

30mA

220-264V

350mA

12V Max

0.75

-25˚C to 50˚C

70˚C

Non dimmable

Yes

80%

IP65

9A 0.8ms

60mA

220-240V

700mA

21V Max

0.85

40˚C

55˚C

Non dimmable

Yes

80%

IP65

12.8A 0.8ms

120mA

220-240V

700mA

36V Max

0.85

40˚C

70˚C

Non dimmable

Yes

80%

IP65

14.9A 0.6ms

220-240V

0.625A Max

24V DC 15W max

>0.9

-25˚C to 45˚C

80˚C

Dimmable with PDCINT 1-10V

Yes

>85%

IP20

50A 0.4ms

PSDIM900

PSDAL900M

PLR/350 1-5

PLU/350 1-9

PLU/PP/350 1-9

PLU/PP6/350 1-9

PLU/700 3-9

PL/IP/350 1-9

PL/IP/350 3-12

3.5W PS288

PL/IP/700 1-3

PL/IP/700 3-9

15W PS1524

12

Yes

Yes

H: 18mm L: 50mm W: 32mm

Mains surge, short circuit, over-load & over heating

Yes

H: 22mm L: 123mm W: 79mm

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Mains surge, short circuit, over-load & over heating

Mains surge, short circuit, over-load & over heating

0.03

0.1

0.5-1.5mm2 Max

Terminals

0.5-2.5mm2 Max

0.5-2.5mm2 Max

WA RR AN TY

AC CE SSO RIE S

OU TPU TC AB LE (M)

INP UT CA BL E (M )

0.5-1.5mm2 Max

1 year guarantee

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Grid dimmer kit

0.1

Yes

H: 19mm ø: 53mm

0.04

Yes

H: 28mm L: 111mm W: 48mm

0.08

Yes

Terminals

Grid dimmer kit

H: 22mm L: 123mm W: 79mm

H: 28mm L: 111mm W: 48mm

CO NN EC TIO NO UT PU T

WE IGH T (K G)

DIM EN SIO NS (MM )

SEL V

PR OTE CTI ON

DIN RA IL M OU NT

/ LO OP OU T LOO P IN

Yes

Short circuit, over-load & over heating

0.1

Terminals

0.5-2.5mm2 Max

0.5-2.5mm2 Max

PDC/GRID DIMMER

4m sync cable

5 years guarantee

SYNC CABLE 4M

Flying leads

0.2

0.2

Terminals

1.5mm2 Max

1.5mm2 Max

1.5mm2 Max

1.5mm2 Max

Terminals

1 year guarantee

PLU weatherproof housing IX 265

1m Plug & Play extension lead LED LYTE 1M EXT

6 way Plug & Play extension lead

1 year guarantee

1 year guarantee

LED LYTE 6 WAY EXT

Yes

Mains surge, short circuit, over-load & over heating

Yes

H: 28mm L: 111mm W: 48mm

0.1

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

1m Plug & Play extension lead LED LYTE 1M EXT

6 way Plug & Play extension lead

1 year guarantee

LED LYTE 6 WAY EXT

Yes

Mains surge, short circuit, over-load & over heating

Yes

H: 28mm L: 138mm W: 40mm

0.1

Mains surge, short circuit, over-load & over heating

Yes

H: 20mm ø: 54mm

0.08

Mains surge, short circuit, over-load & over heating

Yes

H: 30mm ø: 80mm

0.2

Mains surge, short circuit, over-load & over heating

Yes

H: 23mm L: 42mm W: 39mm

0.06

Mains surge, short circuit, over-load & over heating

Yes

H: 20mm ø: 54mm

0.07

Mains surge, short circuit, over-load & over heating

Yes

H: 30mm ø: 80mm

0.2

Yes

H: 19mm L: 123mm W: 44.5mm

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

1 year guarantee

Flying leads

0.3

0.3

1 year guarantee

Flying leads

0.3

0.3

1 year guarantee

Flying leads

0.27

0.27

Flying leads

0.2

0.2

1 year guarantee

Flying leads

0.1

0.1

1 year guarantee

Terminals

0.75mm2 Max

0.75mm2 Max

Grid dimmer kit

Mains surge, short circuit, over-load & over heating

PDC/GRID DIMMER

0.08

Dimming interface PDCINT1-10V

3 years guarantee

RGBW/RGB controller C100924

13

DRIVERS COMPARISON

3/3 INR US HC UR RE NT

PLA Y PLU G&

IP R ATI NG

DO UB LE INS UL ATI ON EFF ICIE NC Y (% )

CO NT RO L

˚C)

˚C) CA SE TEM P. ( TC =

TEM P. ( TA = AM BIE NT

(V) PO WE RF AC TOR

OU TPU TV OLT AG E

OU TPU TC UR RE NT

RA TED WA TTA GE (W) INP UT CU RR EN T (M A) INP UT VOL TAG E (V )

For full driver specifications visit our website collingwoodlighting.com

30W

200-240V

1.25A Max

24V DC 30W Max

>0.9

-20˚C to 45˚C

70˚C

Dimmable with PDCINT 1-10V

Yes

>80%

IP20

50A 0.4ms

50W

220-240V

2A Max

24V DC 50W Max

>0.9

-25˚C to 45˚C

80˚C

Dimmable with PDCINT 1-10V

Yes

>85%

IP20

70A 0.4ms

100W

220-240V

4A Max

24V DC

>0.9

-25˚C to 45˚C

80˚C

Dimmable with PDCINT 1-10V

Yes

90%

IP20

75A 0.7ms

Yes

80%

IP20

45A 1ms

PS3024

PS5024

PS10024

100W

1.6A

110-240V

4.2A Max

24V DC

0.98

-25˚C to 50˚C

75˚C

150W

0.546A

100-240V

6.3A Max

24V DC

>0.95

-40˚C to 60˚C

70˚C

Dimmable with PDCINT 1-10V

>85%

IP65

65A 0.5ms

240W

2A

220-240V

75A 0.57ms

24V DC

>0.95 Max

-40˚C to 70˚C

50˚C

Dimmable with PDCINT 1-10V

93%

IP65

75A 0.6ms

60W

0.35A

220-240V

2.5A Max

24V DC

>0.9

-25˚C to 45˚C

80˚C

1-10V dimmable

>85%

IP66

10A 0.4ms

100W

0.546A

100-240V

4.15A Max

24V DC

>0.98

-40˚C to 60˚C

70˚C

1-10V dimmable

>80%

IP66

45A 0.7ms

200W

1A

100265VAC

8.33A Max

24V DC

0.98

-25˚C to 60˚C

70˚C

DALI dimmable

>85%

IP66

50A 0.8ms

PSDIN10024

PSIP15024

PSIP24024

Yes

PSDIP6024

PSDIP10024

PSDAL20024

14

Yes

Mains surge, short circuit, over-load & over heating

Yes

H: 18mm L: 160mm W: 58mm

WA RR AN TY

AC CE SSO RIE S

OU TPU TC AB LE (M)

INP UT CA BL E (M )

CO NN EC TIO NO UT PU T

WE IGH T (K G)

DIM EN SIO NS (MM )

SEL V

PR OTE CTI ON

/ LO OP OU T LOO P IN

DIN RA IL M OU NT

Mains surge, short circuit, over-load & over heating

Grid dimmer kit

0.16

Terminals

0.75mm2 Max

0.75mm2 Max

PDC/GRID DIMMER

Dimming interface

3 years guarantee

PDCINT1-10V

Grid dimmer kit

H: 18mm L: 160mm W: 58mm

PDC/GRID DIMMER

0.27

Terminals

0.75mm2 Max

0.75mm2 Max

Dimming interface PDCINT1-10V

3 years guarantee

RGBW/RGB controller C100924

Yes

Grid dimmer kit

H: 31mm L: 180mm W: 65.5mm

0.25

Yes

H: 93mm L: 100mm W: 56mm

0.35

Mains surge, short circuit, over-load & over heating

Yes

H: 38mm L: 222mm W: 68mm

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Yes

H: 45mm L: 200mm W: 70mm

Yes

H: 53mm L: 255mm W: 80mm

Yes

H: 53mm L: 255mm W: 80mm

Mains surge, short circuit, over-load & over heating

Yes

Mains surge, short circuit, over-load & over heating

Mains surge, short circuit, over-load & over heating

Mains surge, short circuit, over-load & over heating

H: 40mm L: 244mm W: 67mm

Terminals

0.75mm2 Max

0.75mm2 Max

PDC/GRID DIMMER

Dimming interface

3 years guarantee

PDCINT1-10V

Terminals

0.5-1.5mm2 Max

0.5-1.5mm2 Max

Flying leads

1mm2

1.5mm2

3 years guarantee

Grid dimmer kit

1

1.2

1.1

1.2

1.8

PDC/GRID DIMMER

Dimming interface

3 years guarantee

PDCINT1-10V

0.3m, 1mm2 2 0.3m, 1mm2 Flying leads core cable ø: 2 core cable 7mm ø: 7mm

Flying leads

Flying leads

Flying leads

0.3m 3x1.0mm2 core cable ø: 7mm Mains: 0.3m, 1mm2 2 core cable ø: 7mm 1-10V: 0.3m, 0.75mm2 2 core cable ø: 6.5mm Mains: 0.3m, 1mm2 2 core cable ø: 7mm DALI: 0.3m, 0.75mm2 2 core cable ø: 6.5mm

2x0.3m 3x1.0mm2 core cable ø: 7mm 0.3m, 1.5mm2 2 core cable ø: 8.5mm 0.3m, 1.5mm2 2 core cable ø: 8.5mm

Grid dimmer kit PDC/GRID DIMMER

Dimming interface

3 years guarantee

PDCINT1-10V

Grid dimmer kit PDC/GRID DIMMER

Grid dimmer kit PDC/GRID DIMMER

3 years guarantee

3 years guarantee

3 years guarantee

15

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits DALI input, PWM output DALI broadcast Dims to 0%

HAL 104

No load consumption is 0.4W Sync up to 10 units for dimming (4m sync cable available)

DALI INTERFACE PRODUCT DATA Product Code

HAL 104

Dimensions 9

ELECTRICAL CHARACTERISTICS

8

INPUT

7

Current

Voltage

Power Factor

N/A

<0.05A

220-240V

0.5

6

115mm

5

19mm

Rated wattage

4 3 2

GENERAL

1

Ambient temp (ta = ˚C)

-20 to +50

Case temp (tc = ˚C)

65

Control

DALI broadcast dimming. PWM output.

Sync up to 10 units using additional sync cables.

Double insulation

Yes

Efficiency (%)

80

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating.

SELV (separated extra low voltage)

Yes

Weight (g)

100

WIRING Connection output

Screw terminals, up to 1x 1-2.5mm2 cable

Input cable (m)

N/A

Ouput cable (m)

N/A

ACCESSORIES Product code

4m sync cable

PLD UNI-DRIVE 350MA

1-10V dimmable LED driver

PLD UNI-DRIVE 700MA

1-10V dimmable LED driver

GUARANTEE 2 years

collingwoodlighting.com 16

Description

SYNC CABLE 4M

0

34mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

PDCINT1-10V

Features & Benefits

1-10V DIMMABLE INTERFACE FOR 24V DRIVERS

Converts 24V LED drivers to 1-10V dimmable

PRODUCT DATA Product Code

PDCINT1-10V

Dimensions

ELECTRICAL CHARACTERISTICS

10 9

INPUT

OUTPUT

138mm

8

Rated wattage

Current

Voltage

Current

Voltage

Power factor

6

288W MAX

12A MAX

24V DC

12A MAX

24V DC

N/A

4

28mm

7

5

3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-25 to +40

Case temp (tc = ˚C)

70

Control

i) 1-10V ii) Push to make switch

Double insulation

N/A

Efficiency (%)

99

Inrush current

N/A

IP rating

20

Loop in / Loop out

No

Protection

N/A

SELV (separated extra low voltage)

N/A

Weight (g)

80

40mm

WIRING Connection output

Terminals

Input cable

4mm² MAX

Ouput cable

1.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

GUARANTEE 1 year

collingwoodlighting.com 17

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 4 colour output (RGBW) 350mA output power repeater

PR3011

Control signal wired in parallel to allow expansion of system from each C100924 controller

350mA 50mA RGBW/RGB POWER REPEATER

Up to 100 can be controlled via C100924

PRODUCT DATA Product Code

PR3011

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

Current

Voltage

Current

Voltage

Power factor

4x 8.4W MAX

1.6A MAX

24V DC*

4x 350mA

N/A

N/A

5 4 3

28.5mm

Rated wattage

* Requires a separate 24V input

170mm

6

2 1 0

GENERAL

58mm

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

70

Control

C100924 / DMX2102

Double insulation

N/A

Efficiency (%)

N/A

Inrush current

N/A

IP rating

20

Loop in / Loop out

Yes

Protection

Short circuit & over heating

SELV (separated extra low voltage)

N/A

Weight (g)

165

WIRING Connections

Screw terminals (<2.5mm2 cable)

Input cable (m)

N/A

Ouput cable (m)

N/A

ACCESSORIES Product code

Description

C100924

RGBW controller

RGB & RGBW range

Colour change LED products

PS range

24V LED drivers

CF505RGBW

5-core RGBW ribbon cable

GUARANTEE 5 years

collingwoodlighting.com 18

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 4 colour output (RGBW) 24V output power repeater

PR3002

Control signal wired in parallel to allow expansion of system from each C100924 controller

24V 4V RGBW/RGB POWER REPEATER

Up to 100 can be controlled via C100924

PRODUCT DATA Product Code

PR3002

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

Current

Voltage

Current

Voltage

Power factor

39W / CHANNEL MAX

6.5A MAX

24V DC*

4x 1.6A

4x 24V

N/A

5 4 3

28.5mm

Rated wattage

* Requires a separate 24V input

170mm

6

2 1 0

GENERAL

58mm

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

70

Control

C100924 / DMX2102

Double insulation

N/A

Efficiency (%)

N/A

Inrush current

N/A

IP rating

20

Loop in / Loop out

Yes

Protection

Short circuit & over heating

SELV (separated extra low voltage)

N/A

Weight (g)

165

WIRING Connections

Screw terminals (<2.5mm2 cable)

Input cable (m)

N/A

Ouput cable (m)

N/A

ACCESSORIES Product code

Description

C100924

RGBW controller

RGB & RGBW range

Colour change LED products

PS range

24V LED drivers

CF505RGBW

5-core RGBW ribbon cable

GUARANTEE 5 years

collingwoodlighting.com 19

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver

PLDM35020

Dimmable with most leading & trailing edge dimmers and lighting control systems

MAINS DIMMABLE LED DRIVER FOR USE WITH RL111

Min/Max load: 10W/18W

PRODUCT DATA Product Code

PLDM35020

Dimensions

ELECTRICAL CHARACTERISTICS

9

141mm

8

OUTPUT

7

30mm

INPUT

6

Rated wattage

Current

Voltage

Current

Voltage

Power factor

5 4

N/A

N/A

220-240V

350mA

30 - 52V

>0.95

3 2 1

GENERAL

0

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

80

Control

Phase

Double insulation

Yes

Efficiency (%)

>80

Inrush current

45A 0.2ms

IP rating

20

Loop in / Loop out

No

Protection

Short circuit, over heating and self reset

SELV (separated extra low voltage)

Yes

Weight (g)

95

WIRING Connection output

Terminals

Input cable

0.5mm2 - 1.5mm2

Ouput cable

0.5mm2 - 1.5mm2

ACCESSORIES Product code

LED AR111 replacement for 75W halogen

DM298GRID

LED mains grid dimmer

GUARANTEE 1 year

collingwoodlighting.com 20

Description

RL111

43mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET DALI

Features & Benefits Constant current LED driver Dimmable with ‘push to make’, 1-10V or DALI Addressable DALI

PSDAL350M

Min/Max load: 1-20 x LEDs @ 350mA Sync up to 10 units for dimming (1m sync cable included)

DALI DIMMABLE LED DRIVER PRODUCT DATA Product Code

PSDAL350M

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

25W

0.25A

110-240V

350mA

70V

>0.95

22mm

Rated wattage

5 4 3 2

GENERAL

1

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

80

Control

Dimmable 1-10V & DALI. Sync up to 10 units

Double insulation

Yes

Efficiency (%)

90

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (over heating can be reset)

SELV (separated extra low voltage)

Yes

Weight (g)

100

0

79mm

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

1-10V grid dimmer kit for multiple fitting types

SYNC CABLE 4M

4m sync cable

GUARANTEE 5 years

collingwoodlighting.com 21

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

NEW Features & Benefits Constant current LED driver Dimmable with ‘push to make’, 1-10V Min/Max load: 1-18 x 1W LEDs @ 350mA

PSDIM350

Pre-set at 350mA

25W 350mA DIMMABLE LED DRIVER

Sync up to 10 units for dimming

PRODUCT DATA Product Code

PSDIM350

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

N/A

110-240V

350mA

90V MAX

0.95

22mm

Rated wattage 25W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-20 +50

Case temp (tc = ˚C)

80

Control

1-10V & ‘push to make’

Double insulation

Yes

Efficiency (%)

>80

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Short circuit, over-load, over heating & class II

SELV (separated extra low voltage)

Yes

Weight (g)

100

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

SYNC CABLE 4M

4m sync cable

GUARANTEE 5 years

collingwoodlighting.com 22

79mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver 1-10V & press to make compatible For 1-10 1W LED

PLD UNI-DRIVE 350MA

Min/Max load: 1-10 x LEDs @ 350mA Sync up to 10 units for dimming (1m sync cable included)

1-10V DIMMABLE LED DRIVER (SERIES) PRODUCT DATA Product Code

PLD UNI-DRIVE 350MA

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

103mm

6

Current

Voltage

Current

Voltage

Power factor

15W

N/A

220-240V

350mA

49V MAX

0.98

22mm

Rated wattage

5 4 3 2

GENERAL

1

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

75

Control

Dimmable 1-10V & press to make. Sync up to 10 units with supplied cable.

Double insulation

Yes

Efficiency (%)

80

Inrush current

5A 0.05ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (over heating can be reset)

SELV (separated extra low voltage)

Yes

Weight (g)

100

0

67mm

WIRING Connection output

Terminals

Input cable

0.5-1.5mm² MAX

Ouput cable

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

SYNC CABLE 4M

4m sync cable

GUARANTEE 5 years

collingwoodlighting.com 23

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver 1-10V & press to make compatible For 1-10x 1W LED @ 350mA, 1-9x 3W LED @ 700mA

PSDIN350M PSDIN700M

DIN size = 4 DIN spaces Preset to 350mA or 700mA

350MA / 700MA DIN RAIL MOUNTED, 1-10V DIMMABLE LED DRIVER (SERIES)

Sync up to 10 units for dimming (1m sync cable included)

PRODUCT DATA Product Code

PSDIN350M

Dimensions

PSDIN700M 11 10

ELECTRICAL CHARACTERISTICS

90mm

9

Rated wattage 15W 32W

Current N/A

Voltage 220-240V

OUTPUT Current

Voltage

350mA

53V MAX

700mA

46V MAX

36mm

INPUT

8

Power factor

7 6

0.95

5 4 3

GENERAL

2

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

75

Control

Dimmable 1-10V & press to make. Sync up to 10 units with supplied cable.

Double insulation

Yes

Efficiency (%)

88

Inrush current

5A 0.05ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (over heating can be reset)

SELV (separated extra low voltage)

Yes

Weight (g)

185

1 0

WIRING Connection output

Terminals

Input cable

0.5-4mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

SYNC CABLE 4M

4m sync cable

HAL 104

DCC DALI interface

GUARANTEE 5 years

collingwoodlighting.com 24

70mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Power up to 3 x 1W LED with 12V input or up to 6 x 1W LED with 24V input

PLDCC/350/10-28

Suitable for use in boats & caravans

MINI LED DRIVER (SERIES)

Up to 12 hours running time on a leisure battery

PRODUCT DATA Product Code

PLDCC/350/10-28

Dimensions

ELECTRICAL CHARACTERISTICS

7

INPUT

6

OUTPUT

5

40mm

Rated wattage

Current

Voltage

Current

Voltage

Power factor

3

N/A

N/A

10-28V DC

350mA

28V

0.55

1

2

GENERAL Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

N/A

Efficiency (%)

60

Inrush current

N/A

IP rating

20

Loop in / Loop out

N/A

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

20

12mm

0

18mm

4

WIRING Connection output

Flying lead

Input cable (m)

0.2

Ouput cable (m)

0.2

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 25

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Dimmable with most leading & trailing edge dimmers

PLDM/700 3

Fixed flying leads

MAINS DIMMABLE LED DRIVER

For 3 LED (3x UL010, 1x UL030 & 1x LL090A)

PRODUCT DATA Product Code

PLDM/700 3

Dimensions

ELECTRICAL CHARACTERISTICS

9

INPUT

8

OUTPUT

110mm

7

Current

Voltage

Current

Voltage

Power factor

N/A

TBC

220-240V

700mA

13.5V MAX

0.55

28mm

Rated wattage

6 5 4 3 2

GENERAL

1

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

70

Control

Mains, leading & trailing edge

Double insulation

Yes

Efficiency (%)

80

Inrush current

15A 0.5ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge & short circuit

SELV (separated extra low voltage)

Yes

Weight (g)

70

WIRING Connection output

Flying lead

Input cable (m)

0.3

Ouput cable (m)

0.3

ACCESSORIES Product code

Description

DM298GRID

Mains grid dimmer

GUARANTEE 7 year extended warranty available

collingwoodlighting.com 26

0

48mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver

PLD70049

Dimmable with most leading & trailing edge dimmers

MAINS DIMMABLE LED DRIVER

Min/Max load: 10W/20W

PRODUCT DATA Product Code

PLD70049

Dimensions

ELECTRICAL CHARACTERISTICS

9

141mm

8

OUTPUT

7

30mm

INPUT

6

Rated wattage

Current

Voltage

Current

Voltage

Power factor

5 4

N/A

TBC

220-240V

700mA

28.6V MAX

0.55

3 2 1

GENERAL

0

Ambient temp (ta = ˚C)

-25 +50

Case temp (tc = ˚C)

80

Control

Leading & trailing edge

Double insulation

Yes

Efficiency (%)

83

Inrush current

15A 0.5ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit & thermal reset

SELV (separated extra low voltage)

Yes

Weight (g)

75

43mm

WIRING Connection output

Flying lead

Input cable (m)

N/A

Ouput cable (m)

0.3

ACCESSORIES Product code

Description

DM298GRID

Mains grid dimmer

GUARANTEE 5 years

collingwoodlighting.com 27

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

NEW

Features & Benefits Dimmable with most leading and trailing edge dimmers Plug and play connection for ease of installation

PLDM70011

IP20 for indoor use

9W MAINS DIMMABLE LED DRIVER

Power: 9W MAX

PRODUCT DATA Product Code

PLDM70011

Dimensions

ELECTRICAL CHARACTERISTICS

9

INPUT

8

OUTPUT

110mm

7

Current

Voltage

Current

Voltage

Power factor

9W

N/A

220-240V

700mA

12V MAX

0.95

28mm

Rated wattage

6 5 4 3 2

GENERAL

1

Ambient temp (ta = ˚C)

-20 +50

Case temp (tc = ˚C)

80

Control

Phase

Double insulation

Yes

Efficiency (%)

>80

Inrush current

15A 0.5ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit & class II

SELV (separated extra low voltage)

Yes

Weight (g)

70

WIRING Connection output

PLUG & PLAY

Input cable

150mm 2x 0.75mm2 core cable

Ouput cable

150mm 0.205mm2 red & black PTFE with PLUG & PLAY connector

ACCESSORIES Product code

Description

DM298GRID

Mains grid dimmer

WARRANTY 7 year extended warranty available

collingwoodlighting.com 28

0

48mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET DALI

Features & Benefits Constant current LED driver Dimmable with ‘push to make’, 1-10V & DALI Addressable DALI Min/Max load: 1-18 x 3W LEDs @ 700mA

PSDAL700M

Pre-set at 700mA Sync up to 10 units for dimming (1m sync cable included)

DALI DIMMABLE LED DRIVER PRODUCT DATA Product Code

PSDAL700M

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

0.25A

110-240V

700mA

70V

>0.95

22mm

Rated wattage 50W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

80

Control

Dimmable 1-10V & DALI. Sync up to 10 units

Double insulation

Yes

Efficiency (%)

90

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (over heating can be reset)

SELV (separated extra low voltage)

Yes

Weight (g)

100

79mm

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

SYNC CABLE 4M

4m sync cable

GUARANTEE 5 years

collingwoodlighting.com 29

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

NEW Features & Benefits Constant current LED driver Dimmable with ‘push to make’, 1-10V Min/Max load: 1-18 x 3W LEDs @ 700mA Pre-set at 700mA

PSDIM700

Sync up to 10 units for dimming

50W 700mA DIMMABLE LED DRIVER

Power: 50W MAX

PRODUCT DATA Product Code

PSDIM700

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

0.25A

110-240V

700mA

90V MAX

0.95

22mm

Rated wattage 50W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-20 +50

Case temp (tc = ˚C)

80

Control

1-10V & ‘push to make’

Double insulation

Yes

Efficiency (%)

>80

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Short circuit, over-load, over heating and class II

SELV (separated extra low voltage)

Yes

Weight (g)

100

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

SYNC CABLE 4M

Sync cable, 4m length

GUARANTEE 5 years

collingwoodlighting.com 30

79mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Dimmable with ‘push to make’ or 1-10V

PLD UNI-DRIVE 700MA

For 1-9 3W LED Sync up to 10 units for dimming (1m sync cable included)

1-10V DIMMABLE LED DRIVER PRODUCT DATA Product Code

PLD UNI-DRIVE 700MA

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

103mm

6

Current

Voltage

Current

Voltage

Power factor

100mA

110-240V

700mA

49V MAX

0.98

22mm

Rated wattage 25W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

75

Control

Dimmable 1-10V. Sync up to 10 units with supplied cable

Double insulation

Yes

Efficiency (%)

80

Inrush current

5A 0.05ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (over heating can be reset)

SELV (separated extra low voltage)

Yes

Weight (g)

100

67mm

WIRING Connection output

Terminals

Input cable

0.5-1.5mm² MAX

Ouput cable

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

GUARANTEE 5 years

collingwoodlighting.com 31

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Contains open terminals, must be housed correctly

PLDCC/700 12-24

Suitable for use in boats & caravans Power up to 3 x 3W LED with 12V input or up to 6 x 3W LED with 24V input

LED DRIVER (SERIES) PRODUCT DATA Product Code

PLDCC/700 12-24

Dimensions

ELECTRICAL CHARACTERISTICS

7

INPUT

50mm

OUTPUT

6

Current

Voltage

Current

Voltage

Power factor

N/A

10-28V DC

700mA

23.5V MAX

0.85

5

32mm

Rated wattage N/A

4

GENERAL

3

40

2

Case temp (tc = ˚C)

55

1

Control

Non dimmable

Double insulation

No

Efficiency (%)

70

Inrush current

N/A

IP rating

20

Loop in / Loop out

N/A

Protection

Short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

30

WIRING Connection output

Terminals

Input cable (m)

0.5-1.5mm² MAX

Ouput cable (m)

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 32

0

18mm

Ambient temp (ta = ˚C)

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

NEW

Features & Benefits Constant current LED driver for large retail downlights Dimmable with ‘push to make’, 1-10V Min/Max load: Single large retail downlight only Pre-set at 900mA

PSDIM900

Sync up to 10 units for dimming

50W 900mA DIMMABLE LED DRIVER

Power: 50W MAX

PRODUCT DATA Product Code

PSDIM900

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

0.25A

110-240V

900mA

2-55V

0.95

22mm

Rated wattage 50W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-25 +50

Case temp (tc = ˚C)

80

Control

1-10V & ‘push to make’

Double insulation

Yes

Efficiency (%)

>80

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Short circuit, over-load, over heating & class II

SELV (separated extra low voltage)

Yes

Weight (g)

100

79mm

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

SYNC CABLE 4M

Sync cable, 4m length

GUARANTEE 5 years

collingwoodlighting.com 33

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

NEW

DALI Features & Benefits Constant current LED driver Dimmable with ‘push to make’, 1-10V & DALI Addressable DALI Min/Max load: SIngle large retail downlight only

PSDAL900M

Pre-set at 900mA

50W 900mA DIMMABLE LED DRIVER

Sync up to 10 units for dimming

PRODUCT DATA Product Code

PSDAL900M

Dimensions

ELECTRICAL CHARACTERISTICS

8

INPUT

7

OUTPUT

123mm

6

Current

Voltage

Current

Voltage

Power factor

N/A

110-240V

900mA

90V MAX

0.95

22mm

Rated wattage 50W

5 4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-20 +50

Case temp (tc = ˚C)

80

Control

DALI, 1-10V & ‘push to make’

Double insulation

Yes

Efficiency (%)

>80

Inrush current

20A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

100

WIRING Connection output

Terminals

Input cable

0.5-2.5mm² MAX

Ouput cable

0.5-2.5mm² MAX

ACCESSORIES Product code

Description

SYNC CABLE 4M

4m sync cable

GUARANTEE 5 years

collingwoodlighting.com 34

79mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current driver Fixed flying leads

PLR/350 1-5

For 1-5 1W LED

LED DRIVER (SERIES)

Suitable for products fitted in Zone 0

PRODUCT DATA Product Code

PLR/350 1-5

Dimensions

ELECTRICAL CHARACTERISTICS

3

INPUT

OUTPUT

Rated wattage

Current

Voltage

Current

Voltage

Power factor

N/A

N/A

220-240V

350mA

0-24V MAX

0.6

1

Ø53mm 19mm

2

0

GENERAL Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

>70

Inrush current

12.8A 0.6ms

IP rating

40

Loop in / Loop out

N/A

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

40

WIRING Connection output

Flying lead

Input cable (m)

0.2

Ouput cable (m)

0.2

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 35

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver

PLU/350 1-9

For 1-9 1W LED

LED DRIVER (SERIES)

Mains loop in/loop out terminals

PRODUCT DATA Product Code

PLU/350 1-9

Dimensions

ELECTRICAL CHARACTERISTICS

10

INPUT

9

OUTPUT

111mm

8

Current

Voltage

Current

Voltage

Power factor

N/A

220-240V

350mA

0-36V MAX

0.55

28mm

Rated wattage N/A

7 6 5 4 3

GENERAL

2

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

25.5A 0.6ms

IP rating

40

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

80

WIRING Connection output

Terminals

Input cable (m)

1.5mm2 MAX

Ouput cable (m)

1.5mm2 MAX

ACCESSORIES Product code

Description

IX 265

PLU weatherproof housing

GUARANTEE 1 year

collingwoodlighting.com 36

1 0

48mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver For 1-9 1W LED

PLU/PP/350 1-9

Plug & Play connector attached

LED DRIVER (SERIES PLUG & PLAY)

Mains loop in/loop out terminals

PRODUCT DATA Product Code

PLU/PP/350 1-9

Dimensions

ELECTRICAL CHARACTERISTICS

10

INPUT

9

OUTPUT

111mm

8

Current

Voltage

Current

Voltage

Power factor

N/A

220-240V

350mA

0-36V MAX

0.55

28mm

Rated wattage N/A

7 6 5 4 3

GENERAL

2

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

25.5A 0.6ms

IP rating

40

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

100

1 0

48mm

WIRING Connection output

Terminals

Input cable (m)

1.5mm2 MAX

Ouput cable (m)

1.5mm2 MAX

ACCESSORIES Product code

Description

LL030A

MR16 3W replacement LED

LL090A

MR16 high output replacement LED

WL050

LED wall / step light

LED LYTE range

Mini LED light

LED LYTE 1M EXT

1m Plug & Play extension lead

LED LYTE 6 WAY EXT

6 way Plug & Play extension lead

GUARANTEE 1 year

collingwoodlighting.com 37

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver For 1-9 1W LED

PLU/PP6/350 1-9

6 way Plug & Play connector attached

LED DRIVER (SERIES PLUG & PLAY)

Mains loop in/loop out terminals

PRODUCT DATA Product Code

PLU/PP6/350 1-9

Dimensions

ELECTRICAL CHARACTERISTICS

10

INPUT

9

OUTPUT

111mm

8

Current

Voltage

Current

Voltage

Power factor

N/A

220-240V

350mA

0-36V MAX

0.55

28mm

Rated wattage N/A

7 6 5 4 3

GENERAL

2

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

25.5A 0.6ms

IP rating

40

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

100

WIRING Connection output

Terminals

Input cable (m)

0.5-1.5mm² MAX

Ouput cable (m)

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

LL030A

MR16 3W replacement LED

LL090A

MR16 high output replacement LED

LED LYTE range

Mini LED light

LED LYTE 1M EXT

1m Plug & Play extension lead

GUARANTEE 1 year

collingwoodlighting.com 38

1 0

48mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver

PLU/700 3-9

For 3-9 LED (3-9 UL010 & 1-3 UL030 / LL090A)

LED DRIVER (SERIES)

Suitable for independent mounting

PRODUCT DATA Product Code

PLU/700 3-9

Dimensions

ELECTRICAL CHARACTERISTICS

10 9

INPUT

OUTPUT

138mm

8

Rated wattage

Current

Voltage

Current

Voltage

Power factor

6

N/A

100mA

220-240V

700mA

0-36V MAX

0.85

4

28mm

7

5

3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

70

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

14.9A 0.6ms

IP rating

40

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

100

40mm

WIRING Connection output

Terminals

Input cable (m)

0.5-1.5mm² MAX

Ouput cable (m)

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 39

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Fixed flying leads

PL/IP/350 1-9

For 1-9 1W LED

WATERPROOF LED DRIVER (SERIES)

Waterproof for use outdoors

PRODUCT DATA Product Code

PL/IP/350 1-9

Dimensions

ELECTRICAL CHARACTERISTICS

5

INPUT

OUTPUT

Rated wattage

Current

Voltage

Current

Voltage

Power factor

N/A

100mA MAX

220-240V

350mA

36V MAX

0.6

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

70

Inrush current

12.8 0.8ms

IP rating

65

Loop in / Loop out

N/A

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

80

WIRING Connection output

Flying lead

Input cable (m)

0.3

Ouput cable (m)

0.3

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE

collingwoodlighting.com 40

2

20mm

Ambient temp (ta = ˚C)

300mm

3

1

GENERAL

1 year

300mm

4

0

Ø54mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Fixed flying leads

PL/IP/350 3-12

Min/Max load: 3-12 LEDs at 350mA

WATERPROOF LED DRIVER (SERIES)

Waterproof for use outdoors

PRODUCT DATA Product Code

PL/IP/350 3-12

Dimensions

ELECTRICAL CHARACTERISTICS 7

INPUT

OUTPUT

300mm

Rated wattage

Current

Voltage

Current

Voltage

Power factor

5

N/A

150mA

220-240V

350mA

48V MAX

0.6

4

30mm

3 2

GENERAL

1

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

70

Inrush current

14.9A 0.6ms

IP rating

65

Loop in / Loop out

N/A

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

200

300mm

6

0

Ø80mm

WIRING Connection output

Flying lead

Input cable (m)

0.3

Ouput cable (m)

0.3

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 41

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits

PS288

EMC Standards: BS EN55015, BS EN61000-3-2, BS EN61000-3-3 & EN61547 LVD Standards: BS EN61347 & BS EN61347-2-13

1-3 LED 350MA DRIVER PRODUCT DATA Product Code

PS288

Dimensions

ELECTRICAL CHARACTERISTICS

7 6

OUTPUT

300mm 39mm

INPUT

5

Rated wattage

Current

Voltage

Current

Voltage

Power factor

3

3.5W

30mA

220-264V

350mA

12V MAX

0.75

1

2

23mm

4

0

42mm

GENERAL Ambient temp (ta = ˚C)

-25 +50

Case temp (tc = ˚C)

70

Control

N/A

Double insulation

Yes

Efficiency (%)

80

Inrush current

9A, 0.8ms

IP

65

Loop in / Loop out

N/A

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

60

WIRING Connection output

Flying Lead

Input cable (m)

0.27

Ouput cable (m)

0.27

WARRANTY 7 year extended warranty available

collingwoodlighting.com 42

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Fixed flying leads For 1-3 3W LED (1-3 UL010 & 1 x UL030)

PL/IP/700 1-3

Suitable for fitting applicable products in Zone 0 applications

WATERPROOF LED DRIVER (SERIES)

Waterproof for use outdoors

PRODUCT DATA Product Code

PL/IP/700 1-3

Dimensions

ELECTRICAL CHARACTERISTICS

5

INPUT

OUTPUT

300mm

Rated wattage

Current

Voltage

Current

Voltage

Power factor

N/A

60mA

220-240V

700mA

21V MAX

0.85

3

20mm

2 1

GENERAL Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

55

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

12.8A 0.8ms

IP rating

65

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

70

300mm

4

0

Ø54mm

WIRING Connection output

Flying leads

Input cable (m)

0.2

Ouput cable (m)

0.2

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 43

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant current LED driver Fixed flying leads

PL/IP/700 3-9

For 3-9 3W LED (3-9 UL010 & 1-3 UL030)

WATERPROOF LED DRIVER (SERIES)

Waterproof for use outdoors

PRODUCT DATA Product Code

PL/IP/700 3-9

Dimensions

ELECTRICAL CHARACTERISTICS 7

INPUT

OUTPUT

300mm

Rated wattage

Current

Voltage

Current

Voltage

Power factor

5

N/A

120mA

220-240V

700mA

36V MAX

0.85

4

30mm

3 2

GENERAL

1

Ambient temp (ta = ˚C)

40

Case temp (tc = ˚C)

70

Control

Non dimmable

Double insulation

Yes

Efficiency (%)

80

Inrush current

14.9A 0.6ms

IP rating

65

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

200

WIRING Connection output

Flying leads

Input cable (m)

0.1

Ouput cable (m)

0.1

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 1 year

collingwoodlighting.com 44

300mm

6

0

Ø80mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 24V LED driver for use with LEDSTRIP, GL018, C100924 & TR2818

PS1524

IP20 for indoor use

15W 24V LED DRIVER

Power: 15W MAX

PRODUCT DATA Product Code

PS1524

Dimensions

ELECTRICAL CHARACTERISTICS

6

OUTPUT

123mm

5

19mm

INPUT

4

Rated wattage 15W

Current N/A

Voltage 220-240V

Current

Voltage

Power factor

3

0.625A MAX

24V DC 15W MAX

>0.9

1

2

0

44.5mm

GENERAL Ambient temp (ta = ˚C)

-25 +45

Case temp (tc = ˚C)

80

Control

Dimmable with PDCINT1-10V

Double insulation

Yes

Efficiency (%)

>85

Inrush current

75A

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

80

WIRING Connection output

Terminal

Input cable

0.75mm2 MAX

Ouput cable

0.75mm2 MAX

ACCESSORIES Product code

Description

PDCINT1-10V

1-10V dimming interface for use with 24V LED drivers

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

C100924

RGBW/RGB controller

GUARANTEE 3 years

collingwoodlighting.com 45

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 24V LED driver for use with LEDSTRIP, GL018, C100924, PR3002 & PR3011

PS3024

IP20 for indoor use

30W 24V LED DRIVER

Power: 30W MAX

PRODUCT DATA Product Code

PS3024

Dimensions

ELECTRICAL CHARACTERISTICS

9 8

INPUT

OUTPUT

160mm

7 6

Rated wattage

Current

Voltage

Current

Voltage

Power factor

1.25A MAX

24V 30W MAX

>0.9

5 4

N/A

200-240V

3

18mm

30W

2 1 0

GENERAL

58mm

Ambient temp (ta = ˚C)

-20 +45

Case temp (tc = ˚C)

70

Control

Dimmable with PDCINT1-10V

Double insulation

Yes

Efficiency (%)

>80

Inrush current

50A, 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

157

WIRING Connection output

Terminal

Input cable

0.75mm2 MAX

Ouput cable

0.75mm2 MAX

ACCESSORIES Product code

Description

PDCINT1-10V

1-10V dimming interface for use with 24V LED drivers

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

LED3528 range

Self adhesive flexible LED strip

GUARANTEE 3 years

collingwoodlighting.com 46

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 24V LED driver for use with LEDSTRIP, GL018, C100924, PR3002 & PR3011

PS5024

IP20 for indoor use

50W 24V LED DRIVER

Power: 50W MAX

PRODUCT DATA Product Code

PS5024

Dimensions

ELECTRICAL CHARACTERISTICS

9 8

INPUT

OUTPUT

160mm

7 6

Rated wattage

Current

Voltage

Current

Voltage

Power factor

2A MAX

24V 50W MAX

>0.9

5 4

N/A

220-240V

3

18mm

50W

2 1 0

GENERAL

58mm

Ambient temp (ta = ˚C)

-25 +45

Case temp (tc = ˚C)

80

Control

Dimmable with PDCINT1-10V

Double insulation

Yes

Efficiency (%)

>85

Inrush current

70A 0.4ms

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

270

WIRING Connection output

Terminal

Input cable

0.75mm2 MAX

Ouput cable

0.75mm2 MAX

ACCESSORIES Product code

Description

PDCINT1-10V

1-10V dimming interface for use with 24V LED drivers

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

C100924

RGBW/RGB controller

GUARANTEE 3 years

collingwoodlighting.com 47

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 24V LED driver for use with LEDSTRIP, GL018, PR3002 & PR3011

PS10024

IP20 for indoor use

100W 24V LED DRIVER

Power: 100W MAX

PRODUCT DATA Product Code

PS10024

Dimensions

ELECTRICAL CHARACTERISTICS

9

INPUT

180mm

8

OUTPUT

7 6

Rated wattage

Current

Voltage

Current

Voltage

Power factor

100W

N/A

220-240V

4A MAX

24V DC

>0.9

5 4

31mm

3 2 1 0

GENERAL Ambient temp (ta = ˚C)

-25 +45

Case temp (tc = ˚C)

80

Control

Dimmable with PDCINT1-10V

Double insulation

Yes

Efficiency (%)

90

Inrush current

75A

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (g)

250

WIRING Connection output

Terminal

Input cable (m)

0.75mm2 MAX

Ouput cable (m)

0.75mm2 MAX

ACCESSORIES Product code

1-10V dimming interface for use with 24V LED drivers

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

GUARANTEE 3 years

collingwoodlighting.com 48

Description

PDCINT1-10V

65.5mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits

PSDIN10024

Compatible with TS 35/7.5 & 35/15

100W 24V DIN RAIL LED DRIVER

Cooling by free air convection

PRODUCT DATA Product Code

PSDIN10024

Dimensions

ELECTRICAL CHARACTERISTICS

22

INPUT

21

OUTPUT

56mm

20

Rated wattage

Current

Voltage

Current

Voltage

Power factor

100W

1.6A

110-240V

4.2A MAX

24V

0.98

19 18 17 16

GENERAL

15 14

Ambient temp (ta = ˚C)

-25 to +50

Case temp (tc = ˚C)

75

Control

N/A

Double insulation

Yes

Efficiency (%)

80

Inrush current

45A

IP rating

20

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (auto reset)

SELV (separated extra low voltage)

Yes

Weight (g)

350

13 12 11 10

93mm

9 8 7 6 5 4 3 2 1 0

100mm

WIRING Connection output

Terminals

Input cable

0.5-1.5mm² MAX

Ouput cable

0.5-1.5mm² MAX

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 3 years

collingwoodlighting.com 49

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant voltage LED driver Ideal for 10m RGB/RGBW strip, PR3002 & PR3011 IP65 rated for indoor & outdoor use

PSIP15024

Built in PFC, 0.95 power factor

IP65 24V DC LED DRIVER

Power: 150W MAX

PRODUCT DATA Product Code

PSIP15024

Dimensions

ELECTRICAL CHARACTERISTICS

13 12

INPUT

11

OUTPUT

222mm

10 9

Rated wattage

Current

Voltage

Current

Voltage

Power factor

150W

0.546A

100-240V

6.3A MAX

24V DC

>0.95

8 7 6 5

38mm

4 3 2

GENERAL

1 0

Ambient temp (ta = ˚C)

-40 to +60

Case temp (tc = ˚C)

70

Control

Dimmable with PDCINT1-10V

Double insulation

No

Efficiency (%)

>85

Inrush current

65A 0.5ms

IP rating

65

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (kg)

1.0

WIRING Connection output

Flying leads

Input cable

1mm2

Ouput cable

1.5mm2

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

PDCINT1-10V

1-10V dimming interface for use with 24V LED drivers

GUARANTEE 3 years

collingwoodlighting.com 50

68mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

PSIP24024

Features & Benefits

240W 24V LED DRIVER

Power: 240W MAX

PRODUCT DATA Product Code

PSIP24024

Dimensions 15

ELECTRICAL CHARACTERISTICS

14 13

INPUT

12

OUTPUT

244mm

11 10 9

Rated wattage

Current

Voltage

Current

Voltage

Power factor

8

0.3m

0.3m

7 6

2A

220-240V

75A 0.57ms

24V DC

>0.95 MAX

4

40mm

240W

5

3 2 1 0

GENERAL Ambient temp (ta = ˚C)

-40 - +70

Case temp (tc = ˚C)

50

Control

Dimmable with PDCINT1-10V

Double insulation

No

Efficiency (%)

93

Inrush current

75A 0.57ms

IP rating

65

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (kg)

1.2

67mm

WIRING Connection output

Flying leads

Input cable

0.3m, 1mm2 3 core cable (outside diameter: 7mm)

Ouput cable

0.3m, 1mm2 2 core cable (outside diameter: 7mm)

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

PDCINT1-10V

1-10V dimmable interface for 24V drivers

GUARANTEE 3 years

collingwoodlighting.com 51

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits 24V LED driver for use with LEDSTRIP or GL018

PSDIP6024

IP66 rated for indoor & outdoor use

60W 24V LED DRIVER

Power: 60W MAX

PRODUCT DATA Product Code

PSDIP6024

Dimensions

ELECTRICAL CHARACTERISTICS

13

200mm

12

INPUT

11

OUTPUT

10 9

Rated wattage

Current

Voltage

Current

Voltage

Power factor

300mm

300mm

8 7 6

0.35A

220-240V

2.5A MAX

24V DC

>0.9

5

45mm

60W

4 3 2 1

GENERAL

0

Ambient temp (ta = ˚C)

-25 +45

Case temp (tc = ˚C)

80

Control

1-10V dimmable

Double insulation

Yes

Efficiency (%)

>85

Inrush current

75A

IP rating

66

Loop in / Loop out

Yes

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (Kg)

1.1

WIRING Connection output

Flying leads

Input cable (m)

0.3m 3x 1.0mm2 core cable (outside diameter: 7mm)

Ouput cable (m)

2x 0.3m 2x 1.0mm2 core cable (outside diameter: 7mm)

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

GUARANTEE 3 years

collingwoodlighting.com 52

70mm

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

Features & Benefits Constant voltage LED driver IP66 rated for indoor & outdoor use

PSDIP10024

Built in PFC, 0.98 power factor

IP66 1-10V DIMMABLE LED DRIVER

Power: 100W MAX

PRODUCT DATA Product Code

PSDIP10024

Dimensions

ELECTRICAL CHARACTERISTICS

14

255mm

13 12

INPUT

OUTPUT

11 10 9

Rated wattage

Current

Voltage

Current

Voltage

Power factor

300mm

300mm

8 7 6

0.546A

100-240V

4.15A MAX

24V DC

>0.98

5

53mm

100W

4 3 2 1 0

GENERAL

80mm

Ambient temp (ta = ˚C)

-40 to +60

Case temp (tc = ˚C)

70

Control

1-10V dimmable

Double insulation

No

Efficiency (%)

>80

Inrush current

40A

IP rating

66

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating

SELV (separated extra low voltage)

Yes

Weight (kg)

1.2

WIRING Connection output

Flying leads

Input cable

Mains input: 0.3m, 1mm2 2 core cable (outside diameter: 7mm) 1-10V input: 0.3m, 0.75mm2 2 core cable (outside diameter: 6.5mm)

Ouput cable

LED output: 0.3m, 1.5mm2 2 core cable (outside diameter: 8.5mm)

ACCESSORIES Product code

Description

PDC/GRID DIMMER

Grid dimmer kit for multiple fitting types

GUARANTEE 3 years

collingwoodlighting.com 53

WIRING & DRIVERS TECHNICAL SPECIFICATION SHEET

DALI

Features & Benefits

PSDAL20024

DALI dimmable 24V LED driver

200W DALI DIMMABLE 24V LED DRIVER

IP66 for indoor & outdoor environments

PRODUCT DATA Product Code

PSDAL20024

Dimensions

ELECTRICAL CHARACTERISTICS

14

255mm

13 12

INPUT

OUTPUT

11 10 9

Rated wattage

Current

Voltage

Current

Voltage

Power factor

300mm

300mm

8 7 6

1A

100-265VAC* 8.33A MAX

24V

0.98

5

53mm

200W

4 3

*Technical information below is correct for 220-240VAC

0

GENERAL

80mm

Ambient temp (ta = ˚C)

-25 to +60

Case temp (tc = ˚C)

70

Control

DALI dimmable

Double insulation

No

Efficiency (%)

>85

Inrush current

65A

IP rating

66

Loop in / Loop out

No

Protection

Mains surge, short circuit, over-load & over heating (auto recovery)

SELV (separated extra low voltage)

Yes

Weight (Kg)

1.8

WIRING Connection output

Flying leads

Input cable (m)

Mains input: 0.3m, 1mm2 2 core cable (outside diameter: 7mm) DALI input: 0.3m, 0.75mm2 2 core cable (outside diameter: 6.5mm)

Ouput cable (m)

LED output: 0.3m, 1.5mm2 2 core cable (outside diameter: 8.5mm)

ACCESSORIES Product code

Description

N/A

There are currently no accessories associated with this product

GUARANTEE 3 years

collingwoodlighting.com 54

2 1

!

56

For Colour change wiring, controllers & power repeaters visit our colour change guide.

!

For LED strip profiles and extension cable visit our LED strip guide.

JB1 (PARALLEL)

JB2 (SERIES)

WATERPROOF JUNCTION BOX

WATERPROOF JUNCTION BOX

Key Features

Key Features

Max voltage: 30VDC

IP rating: IP68 (submersible to 2m)

Max voltage: 48VDC

IP rating: IP68 (submersible to 2m)

Max current: 5A

Wiring: Parallel

Max current: 700mA

Wiring: Series

Max conductor size: 1mm2

Inputs: 1

Max conductor size: 1mm2

Inputs: 1

Cable diameter: 5 - 6.5mm2

Outputs: 1 - 3

Cable diameter: 5 - 6.5mm2

Outputs: 1 - 3

Use with

Use with

BOL LED MAINS, GL007A, GL007 FROSTED,

BOL LED 1, GL016, GL019, GL021, GL022, GL040,

GL008A, GL009A, GL018, GL034A, GL038A,

GL041, GL050, GL051, GL063, GL064, GL090, UL010,

SL220A MAINS, WL339, WL340, WL341, WL342

UL030, SL020A BLK, SL030, SL040A, SL220A, SL320A

JB4 (SERIES)

JB5 (PARALLEL)

GEL FILLED WATERPROOF JUNCTION BOX

GEL FILLED WATERPROOF JUNCTION BOX

Key Features

Key Features

Max voltage: 48VDC

IP rating: IP68 (submersible to 1.3m)

Max voltage: 250V AC

IP rating: IP68 (submersible to 1.3m)

Max current: 700mA

Wiring: Series

Max current: 16A

Wiring: Parallel

Max conductor size: 1.5mm2

Inputs: 1

Max conductor size: 1.5mm2

Inputs: 1

Cable diameter: 6.5 - 12mm2

Outputs: 1 - 3

Cable diameter: 6.5 - 12mm2

Outputs: 1 - 3

Use with

Use with

BOL LED 1, GL016, GL019, GL021, GL022, GL040,

BOL LED MAINS, GL007A, GL007 FROSTED,

GL041, GL050, GL051, GL063, GL064, GL090, UL010,

GL008A, GL009A, GL018, GL034A, GL038A,

UL030, SL020A BLK, SL030, SL040A, SL220A, SL320A

SL220A MAINS, WL339, WL340, WL341, WL342

JB3

WC 5-9

WATERPROOF JUNCTION BOX

QUICK RELEASE WATERPROOF JOINT

Key Features

Key Features

Max voltage: 400V AC

IP rating: IP66

Max voltage: 250V AC or 50VDC

IP rating: IP68 (submersible to 1.3m)

Max current: 30A

Wiring: Parallel

Max current: 10A

Wiring: Parallel

Max conductor size: 4mm2

Inputs: 1

Max conductor size: 4mm2

Inputs: 1

Cable diameter: 3 - 12mm2

Outputs: 1 - 7

Cable diameter: 5 - 9mm2

Outputs: 1

Use with

Use with

GL007RGBW, GL016RGBW, GL040CARGB, GL050RGBW, GL090RGBW,

BOL LED MAINS, GL007A, GL007 FROSTED,

UL010RGBW, UL030RGBW, UL345CARGB, UL346CARGB, UL347CARGB,

GL008A, GL009A, GL034A, GL038A SL220A

SL021CARGB, SL220CARGB, WL021CARGB, WL220CARGB

MAINS, WL339, WL340, WL341, WL342

JB6

JB7

INLINE IP68 GEL FILLED CABLE CONNECTOR

5 POLE SCREW TERMINAL IP68 CONNECTOR

Key Features

Key Features

Max voltage: 250V AC

IP rating: IP68 (submersible to 1.3m)

Max voltage: 24V (RGBW only)

IP rating: IP68 (submersible to 1.3m)

Max current: 6A

Wiring: Parallel

Max current: 1.4A (RGBW only)

Wiring: Parallel

Max conductor size: 0.75mm2

Inputs: 1

Max conductor size: 4mm2

Inputs: 1

Cable diameter: 4.8 - 6mm2

Outputs: 1

Cable diameter: 7 - 10.5mm2

Outputs: 1

Use with

Use with

WCR 275 CABLE - Ideal for

GL007RGBW, GL016RGBW, GL040CARGB, GL050RGBW,

extending cable when itâ&#x20AC;&#x2122;s

GL090RGBW, UL010RGBW, UL030RGBW, UL345CARGB, UL346CARGB,

not long enough

UL347CARGB, SL021CARGB, SL220CARGB, WL021CARGB, WL220CARGB

!

Got a query? Contact our team on +44 (0) 1604 495 151

For accessories specific to downlights, ground lights, wall lights, universal lights, spike lights visit the relevant guide.

IX 265

IX 365

PLU WEATHERPROOF HOUSING

PDC WEATHERPROOF HOUSING

Key Features

Key Features

IP rating: IP65

IP rating: IP65

Wiring: Series

Wiring: Series / Parallel

Input: 1

Input: 10

Output: 1

Material: Plastic

Use with

Use with

PLU350/1-9

PS1524, PS3024, PS5024, PS10024, PSDAL20024, PSDIN10024, PSDIP6024, PSDIP10024, PSIP15024, PSIP24024

PDC/GRID DIMMER

UY2 CONNECTOR

GRID DIMMER KIT FOR MULTIPLE FITTING TYPES

QUICK WATERPROOF CONNECTOR

Key Features (CV)

Key Features (CC)

Key Features

Dimming: 1-10V

Dimming: 1-10V

IP rating: IP65

Minimum load: 1 driver

Minimum load: 1 driver

Wiring: Series

Maximum load: 10 driver

Maximum load: 10 drivers

Waterproof type: Gel

Use with (CV)

Use with (CC)

PS1524, PS3024, PS5024,

PLD UNI-DRIVE 350MA,

Use with

PS10024, PSDAL20024,

PLD UNI-DRIVE 700MA,

MF02IP, ML01, ML02, ML03, ML010S,

PSDIN10024, PSDIP6024,

PSDAL350M, PSDAL700M,

ML020S, MS02IP, OCTOLED, WL020A,

PSDIP10024, PSIP15024,

PSDIN350M, PSDIN700M, PSDIM350,

WL220A, WL320A

PSIP24024

PSDIM900, PSDIM700, PSDAL900M

Material: Plastic

CR135

DMX RS 485 CABLE

PTFE CABLE

3-CORE SHIELDED CABLE

Key Features

Key Features

Cable: Red or black 0.205mm2 PTFE

Cable: DMX RS 485 CABLE

Material: Copper

Material: Copper cable

Length: 100m reel

Length: 100m reel (also available by the metre) Indoor / outdoor: Indoor only

Use with

Use with

MC010, MC020, MF02IP, ML01, ML02, ML03,

DMX2102

MS02IP, OCTOLED, UY2 CONNECTOR, WL020A BLK, WL220A, WL320A

WCR 275

WCR 375 BLACK

2-CORE RUBBER CABLE

3-CORE RUBBER CABLE

Key Features

Key Features

Cable: H05RN-F 2 x 0.75mm2

Cable: H05RN-F 3 X 0.75MM2

Material: Copper cable, rubber outer

Material: Copper cable, rubber outer

Length: 100m reel

Length: 100m reel

Indoor / outdoor: Suitable for

Indoor / outdoor: Suitable for

permanent outdoor use

permanent outdoor use

Use with

Use with

JB1, JB2, JB4, JB6

JB1, JB5, WC 5-9

57

GET IN TOUCH

Light your world with Collingwood Lighting We never stop looking for better and more efficient ways to create great lit environments. Our advanced, precisionengineered luminaires are the product of ceaselessly enquiring minds, minute attention to detail, and always paying attention to what customers say.

To see our full range, visit collingwoodlighting.com To find out more, call us on +44 (0) 1604 495 151

facebook.com/collingwoodlighting

twitter.com/collingwoodLED

youtube.com/user/collingwoodlighting

Collingwood Lighting Brooklands House Sywell Aerodrome Sywell Northampton NN6 0BT t +44 (0) 1604 495 151 f +44 (0) 1604 495 095 e sales@collingwoodgroup.com w collingwoodlighting.com