Balcony Condition Railing Installation Procedure

STEP #1:

Align the rear leg of the balcony rail with the rear leg of the landing rail.

STEP #2:

Mount the balcony rail to the side of the landing with the 1⁄4"-20 x 11⁄4" bolts, nuts, and lock washers provided. You may have to drill additional 5⁄16" holes in the landing.

STEP #3:

You must bend the balcony rail bracket to fit your balcony rail. The bracket mounts on the outside of the uppermost stair spindle and on the inside of the front leg of the balcony rail, approximately 10" below the top of the handrail of the stair. You can easily bend the bracket with pliers or vise grips.

STEP #4:

It may be necessary to trim the bracket so that it does not extend beyond the front leg of the balcony rail. This can be done with a hacksaw.

STEP #5:

Drill a 5⁄32" hole in the uppermost stair spindle and on the balcony rail leg as required. Attach the bracket to the uppermost stair spindle and balcony rail leg with the self tapping screws provided.

OPTION 1 OPTION 2