Instruction Manual illustrated
Step 1: Preparing the units Open the cover of the receiver with a screwdriver and insert the two supplied batteries. Before closing the cover you can also insert the supplied wrist straps.
Step 2: Selecting the distance range The receiver can be switched in two sensitivities, short range and long range: -
2 a 4 m (6-13 feets)
-
4 a 8 m (13-26 feets)
Step 3: How to activate the system After switching on the receiver unit by selecting short or long range with the slide switch, then place the transmitter unit on top of the receiver in a way that it fits in the depression on the receiver. The system is activated once you have heard 3 beeping sounds and the LED on the receiver will now start blinking green.
Step 4: How to fix the units The transmitter should be fixed on the child and the receiver to be carried by the parent, as suggested on the pictures.
Step 5: Monitoring When the child gets out of the selected range, the receiver unit will start beeping. When the child comes back into the safe range, the alarm will stop. With one receiver you can monitor up to 4 transmitters
2-8m
Step 6: How to switch off the system Put the transmitter again on the depression of the receiver, you will hear a beeping sound and the transmitter will be switched off. You can now switch off the receiver, moving the slide switch to "off" position.
Smart Target, Lda. Rua Santo AndrÊ de Cima 446 4495-040 Aguçadoura Portugal Web: www.smart-target.pt
www.kiddo-kidkeeper.com
E-mail: geral@smart-target.pt
info@kiddo-kidkeeper.com