Killer Rides #59_Nov 2023

ALSO INSIDE!

BLOWN CHEVELLE 250HP TURBO HARLEY RAMMED ‘34 COUPE & MUCH MORE!

s e d i KILLERR ISSUE #59 - NOV 2023

TROPHY HAULIN’ HR

Australia’s Street Car Community!

Rover!

DERANGED

T S O M E H T STYLISH BURNOUT !

R E V E R A C

MUMBO MEMORIAL SHOW - VICLA VIEW - INDY PRO-STREET INVASION - SEMA SNAPSHOT - XE FALCON/30 FORD/BLOWN CHOPPER VIDEOS

From the Desk IS THERE ANYTHING BETTER THAN HITTING THE OPEN ROAD IN A COOL STREET CAR? I really love this time of year. Most of the country is enjoying longer days thanks to Daylight Savings rolling in and with the increased amount of daylight, the more chances you have to get out and about in your pride and joy.

Living on the NSW South Coast, we are spoilt for choices of amazing coast line to cruise along and some of the nicest rural areas that are begging for long cruise sessions. Back in the day, I’m talking mid to late 80’s, our choice of cruise spot was the South Beach area and up around the lighthouse. If it wasn’t raining, this is where you’d find us most nights after work.

Everyone would congregate there, especially on a sunny Sunday where it was wall to wall tough street cars either parked up taking in the sights, or cutting laps around the beachfront waiting for a parking spot to open up. They were amazing days and many lifelong friendships were forged. Sadly, those areas are now over run by families in their stock cars who get there at the crack of dawn to get the best picnic spots on the grassed area’s overlooking the beach front, or down on the sand itself.

So where do you like to cruise?

For Kathy and I, when time allows, we can venture up to the southern highlands to some of the most picturesque roadways imaginable. We often cruise south to Berry or even just a short cruise to Jamberoo Pub for lunch and then to Kiama before heading back home. Of course, most weekends are spent going to events and if it’s possible, we’ll fill up the Chev and take in a show or two. It may not be the most fuel-efficient car around, but damn its cool to cruise!

And for someone who lives and breathes the modified car scene, it simply doesn’t get any better. Now, where’s my damn car keys…

See you on the street,

Paul

03

BATTERIES FO R ALL

A PPLI CATI ONS

VISIT R&J BATTERIES FOR YOUR NEXT BATTERY

FIND US AT ONE OF OUR 24 BRANCHES AUSTRALIA-WIDE

// 1300 769 282

// rjbatt.com.au

s e d i KILLERR

Australia’s Street Car Community

Issue No.59 Nov 2023

In This Issue!

10 18 20 26 36 48 60 68 78 80 90 98 100 108 116

KILLER RIDES MAGAZINE Po Box 165 Oak Flats NSW 2529 PUBLISHING EDITOR Paul Beck (0432) 795336 paul@killerrides.com.au WEBSITE www.killerrides.com.au

48 Showcar MASTER

WHATS HAPPENING News, views and things of interest HAVE YOUR SAY Got something to say?

COMING ATTRACTION Proflo’s Hemi-powered Monaro JEKYLL AND HYDE This Range Rover shows its nasty side!

TOUGH CAR CENTRAL The first Indy Pro-Street Invasion TOTALLY UTED One of Australia’s top show cars, just gets better!

HEAVY METAL Vortech Blown Big Block ‘70 Chevelle SEMA 2023 The Greatest Show on Earth never disappoints VIDEO FEATURE Rammed 451ci XE Falcon Street Car SPRINGIN’ INTO ACTION Pulfords wild turbo rigid Harley.

GETTIN’ THE LOWDOWN Aussie Vicla’s Vicla View VIDEO FEATURE Blown custom Harley DOIN’ IT TOUGH Big cube, rammed, ‘34 Ford Coupe OUT AND ABOUT Kingpin Kuztums Mumbo Memorial Show VIDEO FEATURE 8-sec Blown big-block ‘30 Ford Coupe

60 BLOWN ’70 CHEVELLE

108 REMEMBERING A MATE VIDEO FEATURE 116 8-sec blown hot rod

118 PERFORMANCE DIRECTORY Need a product or service?

78 VIDEO FEATURE 451ci XE Falcon

26 The classiest burnout car 100 STYLIN ‘34 COUPE

68 SEMA SNAPSHOT 98 VIDEO FEATURE

Blown Chopper

90 VICLA VIEW 36 INDY GOES PRO STREET

80 Turbo terror harley 6

7

WHAT’S HAPPENING

AUTO RUMBLE 3 SHAKES THE GROUND IN MORUYA

When promoter Lee Pearce wound up the South Coast Nationals in Moruya, he wanted to take a few steps back and put together a couple of events that was all about having fun with cars on a more personal level. The small but still impressive gathering filled the grounds of the Ingenia Motel on the river and even featured a couple of impressive drag cars that fired up to entertain everyone within Moruya! We are heading back there for the Hot Rod and Custom event planned for the first weekend of Feb.

MONARO DRAG CAR VIDEO

10

11

WHAT’S HAPPENING BEST OF KILLER RIDES PRINT MAG NOW AVAILABLE

KILLERRides The Best Of

Number one

10 OF THE

T INSANE RIDES!

WILDEST, TOUGHEST, MOS

01_BEST OF

1 KILLER RIDES_1_COVER_EK.indd

5/4/23 5:32 pm

Issue numbers 1 and 2 of the Best of Killer Rides is now in stock and ready to send out via Australia Post, or you can pick up direct from us at any event we attend to promote Killer Rides. No matter where we are, we will have copies with us. To order your copy, simply email me at paul@ killerrides.com.au

Don’t forget to checkout the website!

www.killerrides.com.au 2ND HOT RODS & HARLEY EXPO POSTPONED TO FEB 2024

Due to circumstances beyond our control, we’ve had to rescedule the Hot Rod & Harley Expo from the proposed Nov 25/26 date until February 24/25, 2024. Nothing else changes other than the dates. You can still expect to find the best Hot Rods, Customs and Harley’s ever assembled under one roof, inside the Illawarra Hockey Centre along with a host of traders and even a display of oh-so-cool Pedal Cars! Once again, we will be awarding the Australia’s Most Beautiful Hot Rod, Custom and Harley, with the winners not only get a cool one off Trophy, but also the bragging rights that go along with such a prestigious award! This is one show not to be missed. Remember those new dates - February 24th & 25th, 2024. More information can be found at www.killerrides.com.au

12

9

WHAT’S HAPPENING KILLER

Video

2023 Goodguys Columbus Nationals Video by Top Water Tony

DRAGWAY AT THE BEND OPENER A SELLOUT!

With around 300 competitors filling the pits and more than 20,000 power hungry punters filling the stands, the first major meet at Australia’s newest strip, the Dragway at the Bend, was a complete sellout, showing just how much South Oz was missing their drag racing!

With a program that featured Top Fuel, Top Doorslammer, Top Fuel Bike and Pro-Stock Bike amongst others, it’s no wonder the opening event was such a hit with everyone who filled every viewing spot possible. A bug thumbs up for all involved!

14

IT’S ON! KILLER RIDES CRUISE WITHOUT CARS!

The dates are set and plenty of rooms have been booked out by a heap of Killer Rides followers, which is going to make this one hell of a cruise! If you haven’t booked a room yet, here’s what you need to know; Date: July 4th - 8th, 2024 Cruise: Carnival Splendor out of Sydney Sydney - Tangalooma / Moreton Island - Sydney To book a room, from an Interior room to a Balcony suite, you can contact your own travel agent and use the reference: Z8W1B4. Alternatively, you can use our agent: Le Sharn Bard at Flight Centre Figtree. Call her direct on (02) 42516000 and tell her it’s for the Killer Rides Cruise, and she will make it happen for you. Can’t wait to see you all upon the Carnival Splendor, Thursday July 4th! More information can be found at www.killerrides.com.au

CRUISE without

CARS

15

BLOWN BROTHERS UNITE!

BLOWN MAFIA HEADQUARTERS OPEN DAY - PICS BY BRADLEY GRAY

Bradley Gray, the man behind the Blown Mafia, recently opened up the doors to the Blown Mafia World Headqaurters and invited along some of his Pro-Street mates for show and shine where it was wall to wall blowers!

Long live Pro-Street!

16

17

HAVE YOUR SAY Got something to say? Send it to paul@pscmag.com.au or message us from the Performance Street Car Facebook page.

ROAD TRIP RETURN

Hi Paul, I was reading an older issue of Killer Rides (#47 – May/June 2022) and saw an ad for the Performance Street Car Road Trip. After going through the next few issues, I noticed that the event was cancelled. What a shame.

Is there any chance that it will be part of Killer Rides in the near future? I am almost finished building an LS3-powered HK Brougham and would love to take it for an extended cruise with you guys. Who cares if there’s only 20-30 cars in the convoy? I reckon it would be an awesome, few days away. C’mon Paul, make this happen. Please.

Blake K – Dandenong G’day Blake, Thanks for your message and support. I was devastated why I had to make the call about cancelling the Road Trip. But as it turned out, it was the right decision, as the night we were due to be in Narrandera, floods took over the town and we would have been stranded. With that said, I am determined to bring back the Road Trip. Will that be in 2024? Stay tuned…

18

VIDEO FEATURES ARE COOL

Hi Paul, Just wanted to drop you a line to tell you how much I am enjoying Killer Rides and especially the Video features you have each issue. Being able to see the car in action and to hear the engine running makes so much difference, and that’s why I hang out for every issue of Killer Rides. Keep up the great work.

Thomas N – Townville Hi Thomas, Thanks for your kind words, and your support. Adding videos to Killer Rides is nothing new, in fact I had been running small video clips within the features, but now, they are full sized across a double page, much better, I think. Look for more of these in the future…

CAR PRICES KILLING THE SCENE

G’day Paul, Is it just me, or are people asking ridiculous prices for what’s consider “classic” cars these days? How do people afford to pay $20k plus for a worn-out piece of crap that needs new floors, panels, interior and driveline etc. No wonder it takes more than five years to build a street car now, along with a very big bank account! It makes you wonder if the modified car scene even has a future if prices continue to stay at a level they now are. Is it any wonder we are seeing more and more late model Falcon’s and Commodore’s at events these days?

Martin C – Parramatta G’day Martin, I agree. Some prices that people are asking for ‘wrecks’ is out of control.

But whilst people still hand over large amounts of money for cars worth nowhere near the asking price, we’ll be paying crazy money for some time to come. It really is a worry for the future of our sport.

ARE ELECTRIC CARS DOOMED?

Hi Paul, I was considering buying an EV, or maybe a Hybrid, as a daily driver as rising fuel costs are just crazy. I have been doing some research on EV’s and the ongoing costs associated with them, including the replacement batteries etc. I don’t tend to travel too far these days so running out of charge isn’t a concern. What is a concern though is the amount of EV’s, in particular the Tesla, that have been document to burst into flames.

Everyone I spoke to couldn’t give me an answer other than to say “there have been isolated cases.” Sounds like a corporate line to me. Anyway, after months of reading into the pros and cons regarding EV’s, I’ve decided to wait a little longer to find out more about these Hydrogen engines I heard Toyota are developing.

Zoe G – Penrith

Hi Zoe, I’m not a fan of electric vehicles at all, but I do believe that have a place, especially in major cities where congestion and pollution is a major problem. But even though the world is working towards ‘forcing’ everyone into an Electric Vehicle, it’s comforting to see GM spending billions of dollars on developing their next generation petrol V8 engine. Looks like there’s hope yet!

19

COMING ATTRACTIONS

That thing got a

HEMI?

The tough Monaro’s keep coming from the Proflo Performance workshop, but this time its sporting one hell of an engine transplant!

BILLET NOONAN HEMI 14/71 BDS BLOWER PFP PRODUCTS HAT FABRICATED ENGINE BAY

INDEPENDENT FRONT END RACK & PINION STEERING MASSIVE DISC BRAKES 20

PROFLO PERFORMANCE_1969 HT MONARO WORDS – PAUL BECK PICS – CHARLIE SANT / PROFLO I spotted this Monaro some time ago whilst photographing the Single Spinner inside the Proflo workshop. Initially, it was the huge wheel combo that first grabbed my attention. I remember when I had my HT Monaro in the mid 80’s, 15-inch wheels were pushing the limits. Whilst 15” wheels are still considered a great size for the early Holden muscle car, Paul and his team think that bigger is better with no less than 22x7.5’s on the steering end and a whopping 24x13-inches on the suitably modified rear end that includes a sheet-

metal diff housing with floaters, four-link, coil-overs and massive 16” AP Racing disc brakes and 6-piston calipers visible through the one-off Schott wheels. The rest of the underside is a work of art. There’s been plenty of hours put into the Monaro’s floor with everything smoothed off with flat floors, recessions in the boot floor for the exhaust system and an independent front end tube a-arms, rack and pinion steering and coil-overs. Reworked wheel tubs were installed for those massive rollers, along with a new transmission tunnel.

FOUR-LINK COIL OVERS CUSTOM FUEL CELL DRY SUMP TANK

FLAT FLOOR FABRICATED TRANS TUNNEL CUSTOM EXHAUST 22X7.5 / 24X13 WHEELS WIPER GRILLES REMOVED 21

The body retains its classic Holden lines. After all, these are widely regarded as the best-looking Holden’s of all time, so why would you mess with a reputation like that? Just some subtle mods have been made. Inside, it’s a different story. The wheels tubs, fabricated tunnel and roll cage are obvious and are signature modifications for just about every car that comes through the Proflo workshop. A M&M shifter sits proudly upon the tunnel, in between a pair of Recaro seats. A billet steering wheel and column have also been added. Moving to the boot and it’s all business.

Forget about adding any luggage here, with the custom fuel tank and pump and DMPE dry sump oil tank taking up just about every inch of the available boot space. Up front is a blown injected big block but of another origin. Yes, it’s a Hemi, but not your garden variety street Hemi. This one is a Noonan H2O billet Hemi that is almost out shined by the stunning 14/71 billet BDS blower topped with a polished Proflo Performance (PFP Products) injector hat. The engine is full of top shelf gear and will certainly make its presence known once the Monaro is finished. Backing the engine is a Reid case Turbo 400 auto.

...these are widely regarded as the best-looking Holden’s of all time, so why would you mess with a reputation like that?

22

23

WHERE CUSTOM IS DRIVEN BY YOU

INDEPENDENT FRONT SUSPENSION 1929-2000 Ford Cars and Pickups 1929-2000 Chevrolet Cars and Pickups Holden LH/LX/UC Torana Holden LC/LJ Torana

At the time these pics were taken, the Monaro was about to be pulled down and sent out to have the body and paint sorted. Upon its return, it will be all hands on deck to get the HT back together.

This is going to be one wild ride.

Stay tuned…

CUSTOM CAR BUILDING HOT RODS MUSCLE CARS PICKUP TRUCKS

AUSTRALIA’S LEADING ENGINE BUILDERS SINCE 1978 CHEV - HOLDEN - FORD - MOPAR Specialising in Turn Key Packages

FORD 9” DIFFERENTIAL CONVERSIONS

AUTO TRANSMISSIONS AND CONVERTERS

Superformance.com.au

In business since 1978

Email: info@superformance.com.au

24

07 34887827 539 Redland Bay Road Capalaba, Queensland, 4157 Australia

Words / Pics - Paul Beck

JEKYLL

HYDE

&

It may have started life as a luxury SUV favoured by the rich and famous, but thanks to Thomas Baz, this Range Rover has been given a new life to terrorise burnout pads across the country…

Thomas Baz 2011 Range Rover Sport

26

27

Is it just me, or has the burnout scene created a new level of cars that would hold their own at any car show entered? Sure, there’s still the cars out there that look liked they’ve been dragged from behind a shed where it sat for 30-years, given a fresh driveline and narrowed rear end and then set loose to destroy tyres. That will never change. But then there’s the guys like Thomas that want more from their burnout car. They want the million-dollar paint job, leather clad trim, detailed show-car type engine bays and more! Following in the footsteps of the likes of Gary & Jake Myers, Phil Kerjean, and Steve Loader to name but a few, Thomas wanted his Range Rover to

28

be more than just a regular burnout entrant.

The end result being one standout Range Rover! So, let’s go back a little bit to a time where Thomas’ partner Hayley, was using the Range Rover as a daily drive. As we all know, Euro cars are great until they break.

Securing parts can be a problem and when you do find them, you need to take out a second mortgage to pay for the repairs. A major engine problem saw the Range Rover parked up whilst Thomas decided what he was going to do with it. After six months of deliberating, Thomas took out a big-arse grinder and started to chop up the SUV’s bulbous rear end. There was no turning back now. Its fate had been sealed…

Obviously, it’s not your average “pulled from an SS” type of engine combo, this one is like a hamburger with the lot!

29

Externally, the good looks of the Range Rover have been kept in place. There’s no denying that Land Rover had done a great job when designing the ‘Sport’ version in 2011. And apart from removing a chunk of bonnet steel for obvious reasons and filling out the front guards and reworked rear end with more suitable Simmons wheels, Thomas could see no reason to mess with what the Range Rover designers had offered. Even the slick metallic black paintwork with blacked-out badging has been retained! Against the all-black treatment, the charcoal 22-inch Simmons look classy, especially the deep-dished 12inch wide rears! Whilst the factory front brakes are easily spotted inside the narrow front wheels, you’ll have to get down low to see the Strange discs and calipers that hang off either end of the braced and narrowed 9-inch diff that houses 3.0-gears and 35-spline axles. The diff is located via ladder bars with a pair of Viking coil-overs handling the ride. Custom coil-overs have been adapted to the front end.

30

Inside is everything you’d expect from a world-class Euro-built ride and then some. It’s wall to wall cream leather with just a hint of timber accents ...

31

Inside is everything you’d expect from a world-class Euro-built ride and then some. It’s wall to wall cream leather with just a hint of timber accents to showcase the quality the brand is known for. There’s factory dials everywhere on the steering wheel, centre console and dash, and Thomas has added a few of his own for fuel pumps, ignition, fans etc in a custom facia. Gone though is the original instrument cluster, where a digital Race pack dash now occupies the space. Cleverly, Thomas adapted a B&M shifter to the original spot with a fuel shut-off lever sitting just to the right of the console – just in case… And if Thomas and Hayley have their young boys cruising with them, they can be kept entertained by the DVD screen in the headrests! Mind you, these boys are car crazy and would be more interested in the noise from that engine up front!

THANKS TO: Miller @ Limitless Automotive Wiring for wiring the car front to back.

Speedmaster for the gearbox.

JM Auto Repairs. Wicked Reflections for the complete detailing! Spot-On Wheel Repairs. Kyle Dron. Killer Fabrications for welding the tanks. And my partner Hayley for putting up with me during the 9-month build!

32

33

Speaking of which, it didn’t take long for Thomas to decide that the factory engine, the cause of the Range Rovers not so subtle make over, was never going to be worth the cost of the repair. So he did what every self-respecting rev-head would do, and opt for the worlds most versatile conversion engine – the Chev LS! Obviously, it’s not your average “pulled from an SS” type of engine combo, this one is like a hamburger with the lot, times two! Starting as a 4.8-litre bottom end, the cast iron block still has the factory pistons and rings, but those have been connected to a series 4, crank and rod combo along with a custom cam and LS-7 lifters. A Mellings hi-volume oil pump ensures the slippery stuff gets spready around as soon as the fire in the belly is lit. A pair of LS-1 heads

soon found their way onto the tough bottom end, but not before being fitted with PAC valve springs to handle the high-rpm this combi is going to encounter. Filling the gap between the heads is a Holley Hi-Ram that is the reason that 6/71 Blower Shop supercharger sits so high through the bonnet. Topping the ‘pump’ is a mechanical hat that completes the Range Rover’s more muscular engine option and forces plenty of Methanol into the LS for the MSD ignition to ignite. Thomas isn’t sure about how much horsepower the blown injected LS makes, and isn’t really too fussed. It will make more than enough to destroy the rear tyres at will! Backing the engine is a built Turbo 400 auto that is fitted with a 3500rpm Dominator converter, and can handle around 2500-horsepower!

At the end of the day, Thomas has shown that just about anything can look cool with a set of tubs and a blown engine hanging through the bonnet. I mean, really, who would have thought that a Range Rover would be deemed a Killer Ride? Certainly not the well-to-do set, who prefer Wineries over car shows, designer clothes over black t-shirts and fire pits over burnout smoke! Thomas has now taken something they love and given it the hardcore performance treatment! Be like Thomas…

34

35

INDY PRO-STREET INVASION HENDRICKS CO. FAIRGROUNDS, DANVILLE WORDS - PAUL BECK PICS - GREG ‘BEACH’ BALL

TOUGH CAR

36

CENTRAL

It was wall to wall blowers, tubs and fat tyres for the inaugural Indy Pro-Street Invasion.

37

The brain child of well-known US Street Machiner, Terry Scrivner, the idea behind the Indy Pro-Street Invasion was to get together the cream of the Pro-Street crop from all over the USA to one place in an unrivalled parade of horsepower, caged interiors and fat tyres!

No stranger to tough cars himself, Terry has been part of the US modified car scene since the 70’s where he built and showed his twinturbo Dodge Dart dubbed the “Dart Game”.

Having the Dodge appear in no less than

38

11 magazine features and having shown it competitively within the International Show Car Association group of events from 1977 – 1980, Terry passion for the car scene was set.

Terry knew the Pro-Street brigade wanted their own event and put the wheels in motion for the 1st Annual Indy Pro-Street Invasion. The criteria was simple. You r car must be tubbed, have fat tyres, narrowed or notched frame, narrowed rear end, performance engine and have that undeniable Pro-Street look!

39

Seeing the many blown, injected, tubbed and caged Pro-Streeters out on the streets cruising is something we will never (legally) get to witness here in Australia.

40

41

Sure, the visual appeal of a Pro-Street car is the first things that gets your heart racing, but nothing can compare to hearing that wild engine idle or watching the cars parade around the Hendricks Co Fairgrounds in Danville with their engines on show for all to see and hear. There’s nothing quite like feeling the ground beneath you rumbling as a 1000-plus horsepower ‘street car’ cruises by.

And it wasn’t just the Fairgorunds where the entrants got to cruise around, the entourage

42

also visited the famous Don Schumacher Racing headquarters as well as Top Fuel pilot, Antron Brown’s workshop too! Seeing the many blown, injected, tubbed and caged Pro-Streeters out on the streets cruising is something we will never (legally) get to witness here in Australia. So if you’re itching to see this sort of event and take in everything the Indy Pro-Street Invasion has to offer, best you book your flights and accomodation now for Sept 6th-8th, 2024 for Invasion #2!

43

BEST OF SHOW Wendy Beard’s stunniong ‘70 Cuda took home the inaugural Best of Show award at the Indy ProStreet Invasion. Her candy coloured Cuda, aptly named ‘OBSESION’ a worthy winner amongst so many high-quality ProStreet cars!

44

45

WHO IS TERRY SCRIVNER?

As promoter of the Indy Pro-Street Invasion, Terry Scrivner has spent a lifetime surrounded by Street cars, Show cars and of course, Pro-Street cars. In the 70’s he built and showed a wild Dodge Dart called Dart Game which featured a twin-turbo engine and unbelievable detailing. After a few years on the International Show Car Association circuit, Terry took up a job with the group as a Judge, a position he held until 2008 where he ventured onto judging various other events including Super Chevy, Holley LS Fest, Street Machine Nationals, Corvette Nationals, HotRod Reunion, Goodguys events and many other national and local events. The Indy Pro-Street Invasion is in great hands!

46

47

y l l a t To

UTED!

Craig & Kristie McKenzie 1967 HR Holden Ute

From humble beginnings as a tidy street car, this HR Holden Ute has been through more changes than most of Hollywood A-listers and still come out looking better than ever at the end of it all!

48

49

My memory of this Ute goes back maybe 30-years, when a much younger Ditch Jones used the then Slate Grey HR as a high-quality streeter with aspirations to become much more always in the back of his mind. Whilst keeping the base colour in place, Ditch at one stage added some graphics and even some wild hot pink highlights. In this form, the HR managed a few trophy wins, obviously fuelling Ditch’s desire for bigger and better things for the Ute. After a massive rebuild, it appeared at the Summernats 20, in the now familiar silver and yellow

paint scheme, having been transformed into a Top 10 winning show car, with its numerous body mods, big billet wheels, smooth underside and blown 6-pack engine. I remember seeing some drawings that Ditch had prior to this showing the HR looking more like a drag car than show car, so I was more than surprised when the covers came of it.

After selling the Ute, Bob Gallo took over ownership, continuing the show wins, until he too parted company with it. And that’s when Craig and Kristie McKenzie became the new owners.

Along with the new paint, the Ute had the interior removed, giving a blank canvas for Simon Judd at Elite Custom Interiors to weave his magic...

50

51

The pair gave the HR another quick tidy up before once again hitting the show circuit with the Ute. And yes, still, it was winning trophies everywhere it went, proving that the Ute was built to the highest quality. Craig always knew the time would come where it was no longer a thrill to take the Ute to events in its current guise. And that’s when the decision was made to strip the HR down and give it the mother of all makeovers.

Craig is one of these guys who is very handy on the tools, spending his days doing body and paint on all kinds of cars, so working on his own ride was never going to be an issue.

52

Not wanting to change the award-winning body work too much, one thing was sure to change, and that was the colour scheme.

Whilst the impact of the yellow and silver worked a treat, no one expected the HR to emerge in a shiny coat of white with bronze added to the grilled, headlight and taillight surrounds, the strips in the load area and on the driveline. Even the 18 and 20-inch billet wheel centres had the accent colour added to shine against the polished alloy.

After bringing back the rebuilt Ute, Craig also added subtle black strips to the lower section of the HR’s flanks.

53

Along with the new paint, the Ute had the interior removed, giving a blank canvas for Simon Judd at Elite Custom Interiors to weave his magic – and didn’t he weave some magic over the HR’s insides. Let’ s get straight to the point, the ‘floating’ bucket seats are a game changer. With underside lighting, the grey leather seats appear to be levitating above the floor with no mounting visible. The same material was used on the custom doors, headlining and floors. The

hand-fabbed dash and centre console remain, albeit in the new colour scheme. Blown 6-packs aren’t what you’d call common, and even less so in 2007 when Ditch unveiled the HR to the horsepower hungry crowd at Summernats 20, so keep the blown six-pack in place was an easy decision, plus it’s an iconic piece of this build that people tend to remember. The 4/71-blown 202-cuber was given a freshen up and detailed to a higher standard than ever before.

Let’ s get straight to the point, the ‘floating’ bucket seats are a game changer.

54

Craig and Kristie’s own version of the HR has continued to haul in the awards at every show attended around the country, including several at Killer Rides Live #5 in Unanderra, where it also won a spot in the Top 3 and consequently the Showcar Master award along with the bragging rights too! The plan now is for the HR to return to Summernats 36 where Craig hopes to get the opportunity to go for Grand Champion, an award that has so far, eluded the HR in any of its visits to Canberra. Will 2024 be the year of the HR? We’ll soon see…

55

PHONE: 02 4285 0300 MVRC LIC: 54814

LEO VANGELOVSKI Stockists Of:

MOB: 0415939307 ABN: 73669 696 204

NOW WITH IN-HOUSE CHASSIS DYNO!

www.blautomotive.com.au

leo@blautomotive.com.au

Words - Paul Beck / Pics - Insane Grunt

HEAVYMETAL HEAVY METAL

This story goes back to 2011 when Leigh found this Chevelle in Santa Maria, California.

It was the perfect car for what he was looking for. With help from Justin Stoddard, the Chevelle was swapped for a bunch of cash, and promptly loaded into a shipping container for the long haul from the USA’s west coast to Australia’s east coast port of Brisbane.

After a life-changing medical experience, Leigh Moy decided it was time to get his dream car – a big, bad 1970 Chevelle!

Leigh Moy 1970 Chevelle Malibu

60

61

Having previously built a small block Chev powered LJ Torana and similarlypowered ’80 Jeep Renegade, Leigh knew what he was undertaking with the build, knowing full well it was going to consumed plenty of time and of course, lots of the folding stuff – especially for the driveline he had planned for the Chevelle. When the coupe arrived on Australian soil, Leigh wasted no time in shipping the rolling body off to Ipswich Panel & Paint for Mathew Cass to eliminate years of accumulated sheet metal issues in preparation for the new coat of paint. Leigh recalls that the body was in fair condition, so Mathew didn’t have a huge task ahead of him to get the Chevelle’s body in ‘as new’ condition.

There was no chance of Mathew filling his spray gun with white paint to have the Chevelle looking like it did when it arrived from the US. Instead, Leigh opted for a more impressive Chrysler Midnight Blue from PPG. Against the chrome that these muscle cars are known for, the colour looks nothing short of sensational.

Inside, there’s even more blue to see, with the original interior recovered by Shannon Otto at Otto’s Custom Auto Trim. The split bench seat was kept in place as was the rear seats – each modified with more bolstering added for increased comfort compared to how flat they were way back in 1970. The factory shifter has been given the flick, replaced by a B&M Quicksilver unit. As for the dash, Leigh left the original facia untouched, but added an AutoMeter tacho with shift light and Innovate AFR gauge to the steering column, just behind the smaller alloy steering wheel. S/W oil and water dials were added to the lower section of the dash just in front of the shifter. And if you haven’t already noticed, the dash pad now sports the same blue vinyl as the seats and door trims.

62

63

But it’s under the bonnet that makes this Chevelle much tougher than any Chev engineer back in 1970 could have ever dreamed about. Whilst the Chevelle did have a box to tick on the original order paperwork for a 454-cube big block, but for Leigh, that’s just a starter for bigger and better things. Mark Jones, a Vortech Pro in Colorado in the USA pieced together this pumped big block sporting no less than 475-cubic inches that produced 590hp and 575 lbs of torque in aspirated form, but now there’s a V7 YSI Vortech blower hanging off the side of the big block, that figure will be made redundant, but as yet, the opportunity to dyno it in blown form hasn’t happened.

The engine is much more than a basic big block with a blower added. The original block has been updated with a 454 truck crank, Chev dimple rods with forged pistons and a cam profile that suits the blower setup perfectly. The cylinder heads are cast iron, large oval items that have been given a makeover with larger valves, bigger springs and better rockers.

That big Vortech blower is connected to the engine via a blow-through APD 1000cfm carb and Edelbrock RPM airgap intake manifold. A complete MSD ignition system ignites the 98-octane fuel that gets forced into the blown Chev, with a pair of headers and dual three-inch exhaust dumping the gases with ease.

With help from Justin Stoddard, the Chevelle was swapped for a bunch of cash, cash, and promptly loaded into a shipping container...

64

65

Backing the pumped big block is a purpose-built Turbo 350 auto that features much tougher internals and a 3000rpm Coan converter. Leigh has kept his Chevelle all GM with a 12-bolt diff (with Eaton Posi Traction) bolted in position. Other underside improvements include QA1 springs and Edelbrock shocks on each corner giving the big coupe a much better feel on the road. Standard Chev brakes remain on each end inside the 15x7 and 15x8.5-inch Convo-Pro wheels.

That big Vortech blower is connected to the engine via a blow-through APD 1000cfm carb and Edelbrock RPM airgap intake manifold.

Since the Chevelle has been completed, Leigh has managed to snag quite a few show awards, but it’s on the road where Leigh enjoys the Chevelle the most, especially when he is out and about with the rest of the crew from the Lowlifes Kustom Car Club in Hervey Bay. And as much fun as he is currently having behind the wheel, that’s nothing compared to what it will be like when the new 540-cube engine is done and that blower setup is added to it! Good times ahead…

66

67

w o h S t s e t a e r G The

ON EARTH!

SEMA SNAPSHOT

2023 SEMA SHOW_LAS VEGAS USA WORDS – PAUL BECK PICS - JASON ‘CHUBBRO’ LOWE 68

69

Widely regarded as the number one car show in the world, SEMA attracts power-hungry punters from all over the globe, all hanging out to see what the next big thing is in the world of high-performance, modified cars!

70

71

72

73

74

75

On any day, at any time, there’s no shortage of action in Las Vegas – one of the most visited places in the world. But for four days at the start of November each year, the gamblers are outnumbered by those who are interested fat tyres, big engines and the very latest and greatest parts and accessories unleashed into the market. Thanks to our mate Jason Lowe, we’ve put together this snap shot of SEMA 2024. Enjoy!

76

77

s e d i KILLERR VIDEO FEATURE

ZORAN SAFKULOVSKI - XE FALCON SEDAN

Words / Pics - Paul Beck

SPRINGIN’

Into Action!

Peter Pulford Turbo Harley Rigid Springer

Some people like their Harley’s to be all about the bling – chrome, polished alloy and candy paint. Out of all his bikes, and there’s quite a few, Peter Pulford’s favourite is his downright nasty, turbo-charged, tyre fryin’ rigid Springer – ratty paint and all 80

81

Back when Peter built this bike, he was spending his days (and some nights) inside his Peter Pulford Race Engines workshop, turning spanners on all kinds of high-performance cars and bikes – and in particular custom Harley’s, so it makes complete sense to see Peter having the keys to so many street and strip bikes in his Tool boxes top drawer. Fast forward a bunch of years and Peter’s now retired, living the life on a river-front property, but still tinkering on his and customer bikes when he feels like it. And yes, he still has a bunch of cool stock and custom Harleys, including this 60’s style rigid that he puts above all of his other bikes parked in the home garage… “There’s something about this bike that just does it for me!”, Peter said. Whether it’s the hassle-free finish on the tank and rear fender, or the wild turbocharged 100-cube S&S engine, I guess it doesn’t really matter. At the end of the day, this bike would be the very last one to go – that is if Peter needed to sell off his fleet…

82

83

The build started with a basic 60’s rigid frame that Peter modified to accept the 200mm, 5-speed gearbox and Springer front end.

Whilst the Springer front has been chromed, there’s no shiny stuff attached to the frame itself, just a coat or two of flat black paint.

The bars of choice are drag style with basic black grips and clutch lever. A small billet headlight completes the frame and frontend assembly. You’ll notice there’s no front brake lever, and that’s because there’s no front brake added to the 19x3.5-inch multi-

spoke front wheel. In stark contrast, the rear wheel is an RC Component billet item, measuring 16x6-inches with a 200 tyre. After all, Pete needs all the traction he can get.

Not only is the front wheel missing a brake, there’s also no front fender. The rear tyre is covered by a basic Harley fender whilst the fuel tank used to call a sportster home. As mentioned, Pete loves the ratty look of this bike and the scratched, faded and well-worn yellow and black paint scheme adds the ultimate patina for this bad-ass Bike.

“There’s something about this bike that just does it for me!”, Peter said.

84

85

Now to the business side of the build – the full-tilt power plant. Peter got hold of a basic S&S V-twin and waved his magic over it. After upping the cubic capacity to 100ci, Peter also modified the cases, heads and S&S cylinders, adding Carillo rods and Wiseco pistons in the process. Getting the fuel in to the engine turn burn at a rapid rate is left up to a 48mm Weber carb, and after the fire is ignited by the Crane Hi4 adjustable ignition, the gases are shown the door via a small tail pipe that hangs off the back of the engine’s main feature – the custom turbo install that also includes the custom intercooler that is bolted at the front of the frame. With a smaller turbo in place, the V-twin made an impressive 250hp at the tyre. But with an upgraded turbo now in place, that figure has been increased considerably.

An S&S-cased 5-speed gearbox is mated to the 100-cuber and utilise Andrews gears and a Barrett clutch to deal with power being pushed through it.

Pete launched the Harley hard at the flash of the green bulb and everything was going as planned, until the bike started steering towards the wall...

86

87

The bike was initially built to make an impression on the dyno, but Pete was talked into taking the rigid for a run down the quarter mile. Having spent plenty of time on the dragstrip behind the wheel of many cars and on bikes over the years, he was a little worried about how this was all going to go. Not convinced that it was a great idea, he maned up to the challenge anyway, and with some wheel bars added to the rear of the rigid frame, Pete launched the Harley hard at the flash of the green bulb and everything was going as planned, until the bike started steering towards the wall at warp speed.

With the wall approaching fast and no other option available, Pete ditched the 88

bike before it hit the wall and carried on down the track, stopping the beams with a solid 10-sec ET. Peter soon followed on his back sliding through the beams. It may not have ended the way he had hoped, but man, it would have been impressive none the less! These days, the turbo rigid doesn’t see a lot of use as Pete has many other bikes at his disposal, but you will be able to get up close and personal with the bike at the rescheduled Hot Rod & Harley Expo, Feb 24/25, 2024 inside the Illawarra Hockey Centre. Make sure you’re there to check it out!

THANKS TO: Corey, Jake, Gringo, Hammer Head, East Coast Customs and S&S. 89

GETTIN’ THE

AUSSIE VICLA’S VICLA VIEW_HARLEY HEAVEN_BLACKTOWN, NSW WORDS / PICS – PAUL BECK

! n w o d w o L

Whilst not as big as the previous Vicla showing at Harley Heaven Tempe, the quality on show at their Blacktown store was nothing short of top shelf.

90

91

The bikes started rolling in well before the 11am official kick off time, and soon enough the entire front section of Harley Heaven’s Blacktown store was wall to wall Vicla’s in a display of colour and chrome that had visitors reaching for their sunnies, even under the cloudy, sometimes threatening skies. Vicla’s are all about the right stance, many featuring air-suspension systems front and rear to get the bike way down low. Colour choice is another consideration owners

92

need to go through when building their bikes. Whilst there were some black bikes on display (which still looks classy), many have tried to outdo everyone with all kinds of candy and graphic paint work on display. Likewise, engraving is now a big feature within the Vicla ranks.

The painstaking task of attacking the chrome and alloy parts around various sections of the bike is certainly one way to gain plenty of attention – from both spectators and show judges.

93

For me, the coolest part of this event, was watching the guys ride their bikes in to the show. Standout bike’s likes like Fadi Raad’s stunning 100th Anniversary Springer, Bill Gazila’s amazing GOLOW, Nathan Spadaro’s custom CVO and Jason Spiteri’s oh-so-cool 2015 Slim, to name but a few, cruising from various parts of Sydney to Blacktown proving that even show quality builds still get ridden!

Vicla’s are all about the right stance, many featuring air-suspension systems front and rear to get the bike way down low.

94

95

The event was staged by Aussie Vicla’s and not only featured the bike show, but also discounts on gear inside Harley Heaven, a couple of Food Trucks sorting out those that needed lunch as well as Dizzle from Tattoo Asylum who will be available to add some cool ink to your skin. Overall, it was a great Saturday get together. Old friends caught up, new friendships were made and plenty of spectators made the trip to check out the stunning bikes on display. Next stop, the Aussie Vicla Nationals at Wodonga Racecourse, Dec 2nd. See you there. More info can be found at www.aussieviclas.com

96

97

s e d i KILLERR VIDEO FEATURE

RAY LIPOVIC - BLOWN CHOPPER

DOIN’ IT

WORDS / PICS – PAUL BECK

! h g u o T

We’ve seen the ’34 Ford coupe built in various styles from 60’s Nostalgia to full-tilt Pro-Street. Tim Leggett however wanted his three-window coupe to be timeless in style, performance and attitude!

There’s something about a cool about a ’34 Ford Coupe. Next to the ’32, the ’33 and ‘34 three window coupes are probably the most popular of all Hot Rods globally. Part of the popularity can probably be traced back to ZZ Top who gave the nonRodding community a good look at their ’33 Ford “Eliminator” Coupe that not only featured on the cover of their 1983 Album

of the same name, but also in many video clips. For our man Tim, he wanted a ’34 3-window that wasn’t going to date, was able to hold its own at any show and was user-friendly enough to handle cruising through Sydney’s over populated streets. Tick, Tick, Tick. Like many in the Hot Rodding fraternity, Tim cut his teeth on Street Machines, having previously built an LX Torana.

Tim Leggett

1934 Ford 3-Window Coupe 100

101

When the decision to build a Hot Rod was made, he was on the phone straight away to Deuce Customs to order one of their ’34 3-window chopped fibreglass bodies with the associated panels attached. Tim also ordered a suitable chassis from Lilow Auto Tech that arrived with an independent front end and triangulated four-link. The body arrived in Gel Coat and are that good straight from the mould, that when it was sent to C-Us First Smash Repairs, there wasn’t a whole lot of work to do before colour could be laid onto the mocked-up body. With the body rubbed down and primed, it was time for colour. And what a colour! Tim wanted Red and opted for a stunning pearl red from the Protec range.

Against the polished 6-inch and 8-inch Billet Specialties wheels and all of the polished alloy on the exposed small block Chev, the colour really pops in all light! And as Tim had wished for, this isn’t a colour that will ever date.

In 20-years-time, this will still be a stunning looking coupe. The body covers a chassis that is detailed like a show-only car and features the usual Lilow Auto Tech Chassis components including A1 adjustable coils overs on the front and rear, Commodore disc brakes on the front and Ford drums on the rear, all controlled by a GM master cylinder. There’s also power steering that connects to an Ididit billet steering column and makes cruising that much more comfortable.

The engine of choice is a 383-cube small block Chev that relies on a pair of 650 double-pumper Holley carbs mounted to a polished tunnel ram...

102

103

THANKS TO: Andrew McClelland, Ajay Astruc, John Walker from the Drag-ens Hot Rod Club, for piecing it all together. Gary Talbot, Glen Burns, Jeff and Paul at C-Us-First Smash Repairs for the body and paint. Paul Cooke for the awesome engine. Craig Parker for the detailing. Dave King at King Trim Upholstery for the interior. Aaron from APM for the dyno tuning sessions. Darryl Williams and Duck from Deuce Customs, and last but not least, Mum and Dad for putting up with my crap during the build period…

Before the body was bolted into place, the driveline was added to the detailed chassis. The engine of choice is a 383cube small block Chev that relies on a pair of 650 double-pumper Holley carbs mounted to a polished tunnel ram to be the hero-piece of the engine bay. The tough small block was built by Paul Cooke with reliable horsepower in mind. Aspirated engines are well known for their reliability and driveability, and this rammed small block is no different.

A pair of AFR heads and billet rocker covers join with the polished ram and carbs to form an impressive top end to the stroked small block. Down below, the four-bolt block was kitted out with a Scat crank and rod combo along with

104

forged SRP pistons and rings, a cam and lifter kit from Crane and an ARP oil pump. All of this stuff is hidden away by the Aeroflow sump. An MSD ignition system lights the fire inside the small block with the spent gases guide out via a pair of headers that flow into a dual 3-inch system. Tim got his wish with the 383-cuber making 568hp whilst being totally reliable for regular street use! A turbo 400 auto, with a 3500rpm converter backs the stout small block, with gear changes taken care of via a B&M quick shifter. From there, the power goes rearwards to the 3.5-geared 9-inch diff with its billet axles and trutrac centre easily accounting for the grunt being passed through them.

105

To complete the build, Tim engaged Dave King from King Trim Upholstery handled the job of filling the coupe body with an interior that was a match in quality for the paint on the outside. Opting for a custom twotone grey, Dave covered the Glide bench seat, door trims and headlining to his usual show standard. Dave also installed the grey seat belts and the German weave carpet.

Speedhut custom gauges fill the painted dash and sit behind the Billet Specialties

Outlaw steering wheel that tops the tilt, billet column. It’s taken around four-years and a bunch of the folding stuff to get the ’34 to the point where Tim is happy with the end result. In fact, this is just how Tim had envisaged the ’34 would look way back when he first picked up the phone to place the order for the body and chassis kit. And after winning a spot in the Top 10 at Valla and several other awards, Tim says he wouldn’t change a thing if he were to do it all again…

this isn’t a colour that will ever date. In 20-years-time, this will still be a stunning looking coupe!

106

107

! e t u b i r T g n i l l o R A

108

HOTEL – SUN SEPT 24 RK PA N W O D N SA – D RAD RIDES assic Cars RODS, KUSTOMS AN Photography and Cl ol ko ls O – cs Pi ck Words – Paul Be

For six hours, the driveway into the Sandown Park Hotel was like a revolving door for all kinds of cool cars and bikes, their owners coming together to celebrate the life of a mate no longer in their ranks…

109

Held by Rob Bellio and the crew from Kingpin Events and Social Club to remember a missed mate, the Mumbo Memorial Show and Shine saw hundreds of cool cars and bikes converge on Sandown Park Hotel as a tribute to Robert John Mummery, Mumbo to his many mates…

110

111

The Mumbo Memorial Show and Shine saw hundreds of cool cars and bikes converge on Sandown Park Hotel as a tribute to Robert John Mummery, Mumbo to his many mates…

Referred to by many as a gentleman of the Victorian Hot Rod and Kustom fraternity, Mumbo would have no doubt been looking over the collection of Street Machines, Classics. Hot Rods, Customs and bikes that had gathered together under clear skies to pay their respects. Even if they had never met Mumbo, the legend of the man was spread across the show and shine as many told stories that related to his time in the custom car scene…

112

113

For six hours, the driveway into the Sandown Park Hotel was like a revolving door for all kinds of cool cars and bikes...

114

The variety of cars and bikes that came along to the show varied from patina-covered trucks and cruisers to low-riding sled, tough street machines, Hot Rods of all styles and of course many bikes that go hand in hand with the type of event the guys from Kingpin Kuztums are well

known for. It’s not unusual for their well-run events to attract a huge number of entrants and the Mumbo Memorial show was no different. Keep an eye on their social media pages for the next lot of events they have coming up and get yourself along to take it all in…

115

s e d i KILLERR VIDEO FEATURE

JOE CONDELLO - 1930 FORD COUPE

PERFORMANCE DIRECTORY Advertise your business here from just $70 per month* * Based on 6-month Booking @ 1/8 page size.

BATTERIES FOR ALL APPLICATIONS

All the big brands!

Email: paul@killerrides.com.au for more info.

www.speedpro.com.au

1300 769 282 www.rjbatt.com.au

0411 620918 Australian Made Engine Coolants & Additives

oldskoolrestos@gmail.com

1800 441163

www.liquidintelligence.com.au

ADVERTISE HERE

JUST $70 PER MONTH CONTACT PAUL - 0432 795336

07 3488 7831

www.superformance.com.au

Performance Pulley Systems to suit a wide range of engines

www.wheelswithinwheels.com.au

Phone (02) 42850300

ADVERTISE HERE

JUST $70 PER MONTH CONTACT PAUL - 0432 795336

Unit 2, 25 Badgally Rd, Campbelltown NSW

Ph 02 9820 6800

www.prostreet.com.au

www.lovellsauto.com.au

www.blautomotive.com.au

ADVERTISE HERE

PUBLISHED ONLINE QUARTERLY READ EACH ISSUE FOR FREE! 118

ONTH JUST $70 PER M79 5336 CONTACT PAUL - 0432

119

COMING EVENTS NOV 24-26 SPRINGNATS 30TH ANNIVERSARY Shepparton Showgrounds www.autofest.com.au

FEB 2-4

DRAG-ENS HOT ROD CLUB Mid Week Run - Appin Pub

3-5

29

DEC 2 VICLA NATIONALS Albury / Wodonga - see ad this issue!

3

LYGON STREET BREAKFAST CRUISE AND TOY RUN Kingpin Kuztums www.facebook.com/kingpin.kuztums/

OZ CAR FEST Mansfield VIC www.autofest.com.au COASTER HOT ROD CLUB Coastal Cruise Bill Reid - 0412 851261

9-11 CURRARONG CAMPOUT WEEKEND Shoalhaven Street Rodders John Murray - 0409 121482 11

AUSTRALIAN T-BUCKET NATIONALS Hawkesbury Showground Barney - 0407 419939

9

CARS UNDER THE STARS Penrith Homemaker Centre

10

MID WEEK MUSCLE CAR CLUB Xmas BBQ - Sublime Point 10am-2pm

16

CARS UNDER THE STARS Greenway Plaza, Wetherill Park

29

DRAG-ENS HOT ROD CLUB Mid Week Run - Appin Pub

15-17 CHRYSLERS ON THE MURRAY Wodonga, VIC www.chryslersonthemurray.com

SUMMERNATS 36 EPIC Canberra www.summernats.com.au

29-APR 1 NARRANDERA ROD RUN Narrandera, NSW https://www.facebook.com/ groups/191300369572

JAN 4-7

21

NSW ALL AMERICAN DAY Macarthur Square Shopping Centre Campbelltown

26-28 CRAKK RUN Capital Country Holiday Park, Canberra www.chra.org.au 120

24/25HOT ROD & HARLEY EXPO Illawarra Hockey Centre, Unanderra Killer Rides - Paul 0432 795336 MARCH 10-12 BATHURST AUTOFEST Mt Panorama, Bathurst www.autofest.com.au

29-APR 1 CAMARO/FIREBIRD NATS Albury NSW www.cfnats.com.au Please check closer to the day to see if any of the events have been cancelled due to Covid

Canberra Rod and Kustom Krooze 2024 25, 26, 27, 28 January Capital Country Holiday Park, Sutton, NSW Open to all ASRF Class Vehicles including pre ʻ78 Lots of activities for little kids and big kids Lots of prizes and giveaways!

For more information, go to the Canberra Hot Rod Association Inc Website: www.chra.org.au/CRAKK Enquiries phone Choco on 0412 883 235.

s e d i KILLERR

Australia’s Street Car Community!

e v i t a v o n n I Get with your g n i s i t r e v d A

HERE’S WHAT WE OFFER! EXCEPTIONAL RATES! GLOBAL AUDIENCE! ONLINE 24/7!

VIDEO ENHANCED AD’S! ALL AD’S LINKED! NEW PRODUCT PROMOTIONS! For more information on advertising in Killer Rides, please contact;

Check Us Out on our Social Media Pages!

Paul Beck 0432 795336 paul@killerrides.com.au

PUBLISHING EDITOR

Paul Beck paul@killerrides.com.au Phone 0432 795336

MAILING ADDRESS

PO Box 165 Oak Flats NSW 2529

WEBSITE

www.killerrides.com.au

VALUED CONTRIBUTORS

Lauren Jade @ Xposed Photography Chad Silvey @ Pics by Chaddo Jimmy Tee Photography Greg ‘Beach’ Ball Darren - Trackside Images Jason Lowe