New Tool_1123

Air-Power Snap Ring Tools Bye Bye sore hands!! When you continuously

repetitively use the manual snap ring

to install

ring or heavy

rings, it

to

muscle

You need An Innovative Air Power Snap Ring Tool to quickly install Snap Ring/Ear

 Quickly and Efficiently Install

Snap Rings.  Easy to use, Repeatable, Save Labor Time  Application: Assembly line of Automotive Engine Bays, Dish Washer, Washing Machines, Air Conditioners….etc. Item No.

5488 Item

or

pliers

snap

duty

is very like

cause

ache, fatigue or even injury.

Clamp!

the

KA

No. KA 5488A

Item No KA 5488B Item No. KA 5488C Specification Item No. Stroke Length Tool Diameter Snap/Clamp Size

KA 5488 6.3mm~20mm 203mm 42mm 30mm 40mm (Optional size: 8mm 12mm) KA 5488A 20mm 282mm 42mm 30mm 40mm (Optional size: 8mm 12mm) KA 5488B 6.3mm~20mm 302mm 45mm 30mm 40mm (Optional size: 8mm 12mm) KA 5488C 20mm 270mm 45mm 13mm

Pressure pump to test leaks in cooling system

Provided with 3 twist-on type and 16 threaded type adapters, covering almost all types of car makes and models on the market

Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast

Radiator cap test tubes (black and blue) to test if the radiator cap from the car has leaks

Coolant hose and drain hose are made of cold-resistant material

Application: Alfa, Romeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Dodge, Fiat, Ford, GMC, Honda, Hyundai, Jaguar, Kia, Land Rover, Lincoln, Mazda, Mercedes Benz, Mitsubishi, Nissan, Opel, Peugeot, RAM, Renault, SEAT, Skoda, Saab, Subaru, Tesla, Toyota, Volvo, Vokswagen

RADIATOR CAP LEAK TEST

1. Connect the radiator cap to the blue or black tube

2. Connect a suitable adapter on the other side

3. Pump the pressure that is higher than what is specified on the cap to see if the cap can release pressure (Fig 4) 4. Pump the pressure that is lower than what is specified on the cap to see if the cap can hold pressure



Cooling System Leakage Tester and Vacuum-Type Coolant Refiling Kit 23PCS/SET (Item No. KA-5580)



LEAK TEST 1.

2.

3.

4.

5.

6.

7.

VACUUM TYPE COOLANT REFILL 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

COOLING SYSTEM

Remove the original cap

Choose a suitable adapter

Connect the adapter and the pressure pump

Pump pressure to 10 15 psi (Fig 1)

Rest for at least 15 minutes

Check to see if the pointer on the gauge falls.

If it falls, there are leaks in the cooling system

Jack up the car and drain old coolant

Choose a suitable adapter or the conical adapter

Hang the tool under the hood

Connect the adapter to the cooling system, and connect the tool’s coolant hose

Put the hose with filter in the premixed coolant, and remain submerged under the surface the whole time

Make sure all valves are closed and connect to air compressor

Open the air valve and vacuum can be created (Fig 2)

When no more vacuum can be created, turn off the air valve

Open the coolant valve, and the coolant will be introduced to the

cooling system automatically (Fig 3)

Verify the coolant level, connect the original cap.

Fast refill and no air bleeding

Wiper Angle Adjustment Tools for Tesla

KA-7753TXS Wiper Angle Adjustment Tool for Tesla Model X & Model S



Check & Adjust Angle between Windshield Wiper Arm and Windshield.

How to Use:

Fix Adjustment Tool at the Front of the Wiper Arm, and Adjust the angle with 24mm Open‐End Wrench to Appropriate Angle.

Recommended Specification of Arm:

LHD & RHD Vehicle, Driver’s side: 1.5 degrees +/‐ 3 degrees

LHD & RHD Vehicle, Passenger’s side: 1.7 degree +/‐ 3 degrees

 Suitable for Tesla Model X & Model S  Range: + 20 ﾟ

KA-7753T3 Wiper Angle Adjustment Tool for Tesla Model 3



Check & Adjust Angle between Windshield Wiper Arm and Windshield.

How to Use:

Fix Adjustment Tool at the Front of the Wiper Arm, and Adjust the angle with 24mm Open End Wrench to Appropriate Angle.

Recommended Specification of Arm:

LHD & RHD Vehicle, Driver’s side: 1.5 degrees +/‐ 3 degrees

LHD & RHD Vehicle, Passenger’s side: 1.7 degree +/‐ 3 degrees 

Suitable for Tesla Model 3  Range: + 20 ﾟ

KA-5133A Self-Locking Hose Clamp Pliers – Dual Function for Tesla Hose Clamp KA 5133A Self Locking Hose Clamp Pliers for Tesla Hose Clamp  Application: Car Hose Clamps of Tesla  Suitable for Self Locking Hose Clamps.  Dual Function: Release & Fixing (Securing)  Suitable for 2 Kinds of Self Locking Hose Clamps KA 5317B Brake Caliper Piston Rewind Kit for Tesla Rear Brake  KA

is

 Suitable for both Left

Return

the Caliper. Giving Clearance

Brake Pad. Content: 1 pc‐ Rotating Caliper with 3/8” Dr. (Right & Left Side Threaded allow) 1 pc Backing Pads 2 pcs Adapters for Brake Assemble

5317B

designed to Rewind the Tesla Rear Brake Piston.

& Right Handed Winders, let the Brake Piston

into

for the new