SNOWFLAKE No. 1 FINISHED
SIZE: Approx
3/1 diameter
MATERIALS: Bedspread weight crochet thread: 10 yds white Size 7 steel crochet hook
* _,
to t twice (3 picots now made); ch 1, sk next 3 trc, 2 de in next trc; rep from * 4 times more, rep from t to t 3 times (for last 3 picots); ch 1, sk last 3 trc, join with a sl st in top of beg ch-3 = six 3-picot Ips.
INSTRUCTIONS (Note: All rnds are worked not turn at beg of rnds.)
on right side-do
Ch 8, join with a sl st to form a ring.
Rnd 1: Ch 4 (counts as first trc), work 23 trc in ring, join with a sl st in top of beg ch-4 = 24 trc. Rnd 2: Ch 3, de in same st as joining; * t ch 6, sl st in 5th ch from hook (picot made) t. rep from t 4
Rnd 3: Ch 4, trc in next dc; * t ch 6, sl st in 5th ch from hook (picot made) t, rep from t to t 4 times (5 picots now made); ch 1, trc in each of next 2 dc (between picot lps); rep from * 4 times more, rep from t to t 5 times (for last 5 picots); ch 1, join with a sl st in top of beg ch-4. DO NOT finish off; ch 20 (for loop to hang snowflake), sl st in next trc. Finish off and weave in ends securely. Starch and block out to size following General Instructions on page 3.
SNOWFLAKE No. 2
......
FINISHED SIZE: Approx 5W' diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 17 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.) Ch 6, join with a sl st to form a ring. Rnd 1: Ch 1, work 12 sc in ring, join with a sl st in beg sc. Rod 2: Ch 16, sl st in same st as joining; * ch 16, sl st in next sc; rep from * 9 times more, ch 7, join with a tr trc in last sc (see page 2 for instructions to work a tr trc) = 12 Ips. (Note: Last lp was formed by working ch 7 and tr trc, and thread is now in position to beg next rnd.) Rod 3: * Ch 6, sc over center of next lp; rep from '" 10 times more, ch 3, sk ch-7 of next lp, join with a de in top of tr trc (st used to join pre v rnd) = 12 Ips. Rnd 4: Ch 6 (first 3 chs count as first de of rnd), work 3 de over last de worked (st used to join prev rnd-Fig 1); '" work (3 de, ch 3, 3 dc) over next lp; rep from * 10 times more, work 2 dc
SNOWFLAKE No. 3--FINISHED SIZE: Approx 4y'" diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 12 yds white Size 7 steel crochet hook
INSTRUCTIONS Rnd 1 (right side): Ch 4, work (3 de, ch 3, sl st) in 4th ch from hook (first petal made); * ch 6, work (3 de, ch 3, sl st) in 4th ch from hook (petal made); rep from * 4 times more, ch 2, join with a sl st in beg ch (same st where sts of first petal were worked), being careful not to twist sts = 6 petals. Finish off. Rod 2: With right side facing you, join with a sl st in center de of any petal, ch 8 (first 3 chs count as first dc of rnd), work (de, ch 5, de, ch 5, de) in
over ch-3 of next lp (next to beg ch-6), join with a sl st in 3rd ch of beg ch-f = 24, 3-dc groups + 12 ch-3 sps. Rod 5: Sl st into next ch-3 sp, ch 5, work a d trc in same sp (see page 2 for instructions to work a d trc); * ch 5, 2 d trc in same sp; ch 11 (for lp at point), 2 d trc in same sp; ch 5, 2 d trc in same sp; ch 5, sk next two 3-dc groups, sc in next ch-3 sp; ch 5, sk next two 3-dc groups, 2 d trc in next ch-3 sp; rep from * around, ending last rep without working last 2 d trc, join with a sl st in top of beg ch-5. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
"""""1
same st; * work 4 dc with ch 5 between each dc in center de of next petal; rep from * 4 times more, join with a sl st in 3rd ch of beg ch-B = 18 ch-5 sps. DO NOT finish off. Rnd 3: Ch I, do not turn; sc in first ch-5 sp, * ch 4, de in next ch-5 sp; ch 6, work (3 dc, ch 3, sl st) in 4th ch from hook (first petal of point made); t ch 9, work (3 dc, ch 3, sl sty in 4th ch from hook (petal made) t: rep from t to t once more (3 petals of point now made), ch 2, dc in same ch-5 sp (same sp where dc was worked before last 3 petals); ch 4, sc in each of next two ch-5 sps; rep from * around, ending last rep by working sc in last ch-5 sp (instead of sc in each of next two ch-5 sps), join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
5
c*
SNOWFLAKE No. 4
....
FINISHED SIZE: Approx 5/1 diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 16 yds white Size 7 steel crochet hook
Rnd 4: Ch 3, 2 de in next de, de in next de; * eh 6, sk next ch-5 sp, de in next de, 2 de in next de, de in next de; rep from * around to last eh-5 sp, eh 6, sk last ch-5 sp, join with a sl st in top of beg eh-3 = six 4-de groups. Rnd 5: Ch 3, 2 de in each of next 3 de;
INSTRUCTIONS (Note: All rnds are worked
on right
side-do
not turn at beg of rnds.)
6, sk next eh-6 sp, de in next dc, 2 de in each of next 3 de; rep from * around to last eh-6 sp, eh 6, sk last eh-6 sp, join with a sl st in top of beg eh-3 = six 7-dc groups.
Rnd 2: Ch 3, dc in next de;
* ch 6, sk next de (center de of 7-de group), de in each of next 3 de; ch 6, sk next eh-6 sp, de in each of next 3 de; rep from * 4 times more, ch 6, sk next de (center de of last 7-de group), de in each of next 3 de; eh 6, sk last eh-6 sp, join with a sl st in top of beg eh-3.
Rnd 3: Ch 3, 2 de in next de; * eh 5, sk next eh-4 sp, de in next de, 2 de in next de; rep from * around to last eh-4 sp, eh 5, sk last eh-4 sp, join with a sl st in top of beg eh-3 = six 3-de groups.
Rnd 7: Ch 3, de in each of next 2 de; * eh 3, work (de, ch 12, de) in next ch-6 sp; ch 3, de in each of next 3 de; eh 3, sc in next eh-6 sp; ch 3, de in each of next 3 de; rep from * around, ending last rep without working last 3 de, join with a sl st in top of beg eh-3. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
Ch 6, join with a sl st to form a ring.
Rnd 1: Ch 3 (counts ring, join 18 de.
with
as first de), work 17 dc in a sl st in top of beg eh-3 =
*' ch 4, sk next de, de in each of next 2 de; rep from * around to.last de, eh 4, sk last de, join with a sl st in top of beg ch-S = six 2-de groups.
6
*' ch
Rnd 6: Ch 3, de in each of next 2 de;
SNOWFLAKE No. 5__ FINISHED SIZE: Approx 5" diameter from point to point)
(measured
MATERIALS: Bedspread weight crochet thread: 12 yds white Size 7 steel crochet hook
_,....
*
of next cluster; ch 6, work (sc, ch 4, sc) in 4th ch of next ch-7 (picot made); rep from * 4 times more, ch 6, sc in top of last cluster, ch 3, sk ch-3 of next lp, join with a trc in top of trc (st used to join prey rnd and same st where first picot was completed).
Rnd 3: * t Work (ch 7, sl st in 4th ch from hook) INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.) Ch 8, join with a sl st to form a ring.
Rnd 1: Ch 4 (counts as first trc of beg cluster), work beg cluster in ring as follows: Keeping Last lp of each st on hook, work 2 trc in ring (3 Ips now on hook), YO hook and draw through all 3 Ips on hook (beg cluster made). * Ch 7, work a cluster in ring as follows: Keeping Last lp of each st on hook, work 3 trc in ring (4 Ips now on hook), YO hook and draw through all 4 Ips on hook (cluster made); rep from * 4 times more, ch 3, join with a trc in top of beg cluster = 6 clusters + 6 Ips. (Note: Last lp was formed by working ch 3 and trc, and thread is now in position to beg next rnd.) Rnd 2: Ch 4, sc in top of trc just made (st used to join prey rnd)-first picot made. * Ch 6, sc in top
twice (2 picots now made); ch 3, sk next picot, sc over center of next ch-6 lp t: ch 3, sc over center of next ch-6 Ip; rep from * 4 times more, then rep from t to t once; ch 1, sk ch-3 of next lp, join with a dc in top of trc (st used to join prey rnd) = six 2-picot Ips.
Rnd 4: Ch 1, work (sc, ch 4, sc) in top of dc just made (st used to join prey rnd)-picot made. * Ch 7, sl st in 4th ch from hook (picot made); ch 3, trc in center ch of next picot Ip (between picots); ch 7, sl st in 4th ch from hook (picot made), work (ch 4, sl st in 4th ch from hook) twice (2 more picots made); ch 3, trc in center ch of same picot lp (same st where tre was worked before last 3 picots); ch 7, sl st in 4th ch from hook (picot made); ch 3, work (sc, ch 4, sc) in center eh of next eh-3 (between picot Ips); rep from * around, ending last rep without working last group of (sc, eh 4, sc), join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
7
SNOWFLAKE No. 6 FINISHED SIZE: Approx 5Y." diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 23 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.)
Rnd 1: * Ch 4, sl st in 4th ch from hook (picot made); rep from * 5 times more, join with a sl st in beg ch (st at base of first picot-Fig 1) 6 picots.
....... Rnd 3: Ch 3, 2 de in next de; * work 3 picots, sk next 2-pieot lp, de in next de, 2 de in next dc; rep from * 4 times more, work 3 picots, sk last 2-picot lp, join with a sl st in top of beg ch-3 = six 3-pieot Ips. Rnd 4: Ch 3, * 2 de in next de, de in next de; work 4 picots, sk next 3-pieot lp , de in next de; rep from * around, ending last rep without working last dc, join with a sl st in top of beg eh-3 = six 4-pieot Ips. Rnd 5: Ch 3, * de in next de, 2 de in next de, de in next dc; work 5 picots, sk next 4-picot lp, de in next de; rep from * around, ending last rep without working last de, join with a sl st in top of beg ch-3 = six 5-picot Ips.
Rnd 6: Ch 3, * de in next de, 2 dc in next de, de in each of next 2 de; work 6 picots, sk next 5-picot lp, dc in next dc; rep from * around, ending last rep without working last de, join with a sl st in top of beg eh-3 = six 6-picot Ips.
Rnd 2: Ch 3, de in same st as joining; * work (ch 4, sl st in 4th ch from hook) twice (2 picots now made), 2 de in eh at base of next picot; rep from * 4 times more, work 2 picots (as before), join with a sl st in top of beg ch-3 = six 2-pieot Ips.
8
Rnd 7: Ch 3, de in each of next 5 dc; * work 4 picots, trc in 3rd picot of next 6-picot lp; work 7 picots, trc in next picot of same 6-picot lp; work 4 picots, dc in each of next 6 de (between 6-picot Ips); rep from * around, ending last rep without working last 6 de, join with a sl st in top of beg ch-3. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
SNOWFLAKE No. 7
.....
FINISHED SIZE: Approx 5" diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 18 yds white Size 7 steel crochet hook INSTRUCTIONS (Note: All rnds are worked not turn at beg of rnds.)
on right
side-do
Ch 10, join with a sl st to form a ring.
tions to work a d trc) = 6 clusters + 6 Ips. (Note: Last lp was formed by working ch 3 and d trc, and thread is now in position to beg next rnd.)
Rnd 3: * Ch 12, sc over center of next lp; rep from * 4 times more, ch 12, sk ch-3 of next lp, join with a sl st in top of d trc (st used to join pre v rnd) = 6 Ips. Rnd 4: Ch 1, * work (7 sc, ch 7, 7 sc) over next lp; rep from * 5 times more, join with a sl st in beg sc = 6 ch-7 sps.
Rnd 1: Ch 1, work 18 sc in ring, join with a sl st beg sc.
Rnd 5: Ch 5 (first 3 chs count as first de of rnd), sk next 2 sc, de in next sc; * t eh 2, sk next 2 sc,
Rnd 2: Ch 4 (counts as first trc of beg petal), war k beg petal over next 2 sc as follows: Keeping last lp of each st on hook, work trc in each of next 2 sc (3 Ips now on hook-Fig 1), YO hook and draw through all 3 Ips on hook (beg petal
de in next se; eh 2, work (dc, eh 2, trc, ch 5, trc, ch 2, dc) in next eh-7 sp; eh 2, dc in next sc, work (ch 2, sk next 2 sc, dc in next sc) twice +; dc in next sc (first st of next 7-sc group), ch 2, sk next 2 sc, de in next sc; rep from * 4 times more, then rep from t to t once, join with a sl st in 3rd ch of beg ch-5.
Rnd 6: Ch 1, sc in each of next two ch-2 sps;
* work
made). * Ch 8, work a petal over next '3 sc as follows: Keeping last lp of each st on hook, work trc in each of next 3 sc (4 Ips now on hook), YO hook and draw through all 4 Ips on hook (petal made); rep from * 4 times more, ch 3, join with a d trc in top of beg petal (see page 2 for instruc-
(ch 5, sc in next ch-2 sp) twice, ch 5, sc in next ch-5 sp (at point); ch 10, sl st in 10th ch from hook, sc in same ch-5 sp; work (ch 5, sc in next ch-2 sp) 3 times, sc in each of next three ch-2 sps; rep from * around, ending last rep by working sc in last ch-2 sp (instead of sc in each of next three ch-2 sps), join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
9
*
SNOWFLAKE No. 8 FINISHED SIZE: Approx 5W' diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 18 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.) Ch 8, join with a sl st to form a ring. Rnd 1: Ch 6 (first 4 chs count as first trc of rnd), trc in ring; II< ch 2, trc in ring; rep from II< 9 times more, ch 2, join with a sl st in 4th ch of beg ch-6 = 12 ch-2 sps. Rnd 2: Ch 1, work 3 sc in each ch-2 sp around, join with a sl st in beg sc = 36 sc. Rnd 3: Ch 4 (first 3 chs count as first dc of rnd), dc in next sc; II< ch I, dc in next sc; rep from II< around, ch 1, join with a s1 st in 3rd ch of beg ch-4 = 36 ch-1 sps. Rnd 4: Ch 1, work 2 sc in each ch-l sp around, join with a sl st in beg sc = 72 sc.
10
~ Rnd 5: Ch 4, trc in each of next 4 sc; ...ch 5, sk next sc, sc in each of next 5 sc; ch 5, sk next sc, trc in each of next 5 sc: rep Irom " 4 times more, ch 5, sk next sc, sc in each of next 5 sc; ch 5, sk last sc, join with a sl st in top of beg ch-4 = 12 ch-5 sps. Rnd 6: Ch 1, sc in same st as joining; II< ch 7, sl st in 4th ch from hook (picot made); ch 3, trc in next trc, work (ch 7, s1 st in 4th ch from hook) twice (2 more picots made); ch 3, work (s1 st, ch 3, sl st) in ch at base of 2nd picot from hook (Fig I-picot made); ch 3, sk next trc, trc in next trc; ch 7, sl st in 4th ch from hook (picot made); ch 3, sc in next trc; work 3 sc in beg of next ch-5 sp, ch 4, sl st in 4th ch from hook (picot made); work 3 sc in end of next ch-5 sp, sc in next trc; rep from ...around, ending last rep without working last sc, join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
SNOWFLAKE No. 9 FINISHED SIZE: Approx 5" diameter from point to point)
.... (measured
MATERIALS: Bedspread weight crochet thread: 17 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked
on right
side-do
not turn at beg of rnds.) Ch 10, join with a sl st to form a ring.
Rnd 1: Ch 3 (counts as first de), work 23 de in ring, join with a sl st in top of beg ch-3 = 24 dc. Rnd 2: Ch 1, sc in same st as joining; * ch 15, sk next 3 de, sc in next de; rep from * 4 times more, ch 15, sk last 3 de, join with a sl st in beg sc = 6 ch-15 Ips.
work 2 trc in same sp (3 Ips now on hook), YO hook and draw through all 3 Ips on hook (2-trc cluster made). * Ch 4, work 3-trc cluster in next ch-5 sp (at point) as follows: Keeping last lp of each st on hook, work 3 trc in next ch-5 sp (4 Ips now on hook), YO hook and draw through all 4 Ips on hook (3-trc cluster made); ch 12, work 2-trc cluster in 5th ch from hook; ch 3, trc in 4th ch down from base of 2-trc cluster just made (Fig 1); ch 3, work 3-trc cluster in same ch-5 sp (same sp where prev 3-trc cluster was worked); ch 4, work 3-trc cluster in each of next two ch-5 sps; rep from * around, ending last rep by working 3-tre cluster in last eh-5 sp (instead of 3-trc cluster in each of next two ch-5 sps), join with a sl st in top of beg 2-trc cluster. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
Rnd 3: Ch 1, * work 5 sc over beg of next ch-15 lp, then work (ch 5, 5 sc) 3 times over same lp; rep from * 5 times more, join with a sl st in beg sc = 18 ch-5 sps. Rnd 4: Sl st in each of next 4 sc and then into first ch-5 sp; ch 4, work 2-tre cluster in same sp as follows: Keeping last lp of each st on hook,
11
~SNOWFLAKE No. 10
MATERIALS: Bedspread weight crochet thread: 20 yds white Size 7 steel crochet hook
Rnd 6: Ch 1, sc in same st as joining, sc in each of next 2 sc; * sk next sc, ch 7, sc over center of next lp; ch 7, sk next sc, sc in each of next 5 sc; rep frorn " around, ending last rep by working sc in each of next 2 sc (instead of sc in each of next 5 sc), join with a sl st in beg sc = 12 ch-7 Ips.
INSTRUCTIONS (Note: All rnds are worked not turn at beg of rnds.)
Rnd 7: Ch 1, sc in same st as joining, sc in next sc; '" sk next sc, work (ch 7, sc over center of next 1p) twice; ch 7, sk next sc, sc in each of next 3 sc; rep fr om " around, ending last rep by working sc in next sc (instead of sc in each of next 3 sc), join with a sl st in beg sc = 18 ch-7 Ips.
FINISHED SIZE: Approx from point to point)
5/1 diameter
(measured
on right side-do
Ch 5, join with a sl st to form a ring. Rnd 1: Ch 1, work 12 sc in ring, join with a sl st in beg sc. Rnd 2: Ch 1, sc in same st as joining; '" ch 5, sk next sc, sc in next sc; rep from " around to last sc, ch 5, sk last sc, join with a sl st in beg sc = 6 ch-5 Ips. Rnd 3: Ch 1, sc in same st as joining; '" sc over beg of next lp, ch 4, sc over end of same lp, sc in next sc; rep Irorn " around to last lp, sc over beg of last lp, ch 4, sc over end of same lp, join with a sl st in beg sc = 6 ch-4 Ips. Rnd 4: Ch 1, sc in same st as joining, sc in next sc; * sc over beg of next lp, ch 3, sc over end of same lp, sc in each of next 3 sc; rep from '" around, ending last rep by working sc in next sc (instead of sc in each of next 3 sc), join with a sl st in beg sc = 6 ch-3 Ips. Rnd 5: Ch 1, sc in same st as joining, sc in each of next 2 sc; * work (sc, ch 5, sc) over next 1p, sc in each of next 5 sc; rep from * around, ending last rep by working sc in each of next 2 sc (instead of sc in each of next 5 sc), join with a sl st in beg sc = 6 ch-5 Ips.
12
..... ~
Rnd 8: Ch 1, sc in same st as joining; '" t sk next sc, ch 8, sc over center of next lp, work (ch 7, sc over center of next lp) twice t: ch 8, sk next sc, sc in next sc; rep from '" 4 times more, then rep from t to t once; ch 3, sk next sc, join with a trc in beg sc = 24 Ips. (Note: Last 1p was formed by working ch 3 and trc, and thread is now in position to beg next rnd.) Rnd 9: Ch 9, sc over center of next 1p; '" work (ch 5, sc over center of next 1p) 3 times, ch 9, sc over center of next 1p; rep trom " 4 times more, work (ch 5, sc over center of next lp) twice, ch 2, sk ch-3 of next 1p, join with a trc in top of trc (st used to join prev rnd) = 6 ch-9 Ips. Rnd 10: * t Ch 5, work a cluster over next ch-9 lp as follows: Keeping last lp of each st on hook, work 3 trc over ch-9 lp (4 lps now on hook), YO hook and draw through all 4 lps on hook (cluster made); ch 7, sl st in 4th ch from hook (picot made); ch 3, work another cluster over same lp t. work (ch 5, sc over center of next lp) 3 times; rep from * 4 times more, than rep from t to t once; work (ch 5, sc over center of next 1p) twice, ch 5, sk ch-3 of next 1p, join with a sl st in top of trc (st used to join prev rnd). Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
No.
10
SNOWFLAKE No. 11 FINISHED SIZE: Approx 31,4" diameter (measured from point to point)
MATERIALS: Bedspread weight crochet thread: 12 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.)
N_o_. 1_1
---.
Rnd 3: Ch 3, dc in next de; * ch 3, de in each of next 2 de; ch 3, se in next ch-3 sp; eh 3, de in each of next 2 de: rep from * 4 times more, ch 3, de in each of next2 de; ch 3, sc in lastch-3 sp; ch 3,join with asl st in top of beg ch-3 = 18 ch-3 sps. Rnd 4: Sl st in next de and then into next ch-3 sp; ch 4 (counts as first tre of rnd), work (tre, eh 5, 2 trc) in same sp; * t ch 3, sk next 2 dc, se in end of next ch-3 sp; sc in next sc, sc in beg of next ch-3 sp t; eh 3, sk next 2 de, work (2 tre, eh 5, 2 tre) in next ch-3 sp; rep from * 4 times more, then rep from t to t once; ch 3, join with a sl st in top of beg ch-4.
Ch 8, join with a sl st to form a ring. Rnd 1: Ch 3 (counts as first de), work 17 de in ring, join with a sl st in top of beg ch-3 = 18 de. Rnd 2: Ch 3, dc in same st as joining, 2 de in next de; * ch 3, sk next de, work 2 dc in each of next 2 de; rep from * 4 times more, eh 3, sk last de, join with a sl st in top of beg eh-3 = six 4-dc groups + 6 ch-3 sps. .
Rnd 5: Sl st in next trc, ch 1, sl st into next ch-5 sp (at point); ch 3, work (de, eh 7, 2 de) in same sp; * ch 6, sk next ch-3 sp, sc in center se of next 3-sc group; ch 6, sk next ch-3 sp, work (2 dc, ch 7, 2 de) in next eh-5 sp (at point); rep from * around, ending last rep without working last group of (2 de, ch 7, 2 de), join with a sl st in top of beg ch-3. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
13
SNOWFLAKE No. 12 FINISHED SIZE: Approx 3W' diameter from point to point)
\
(measured
MATERIALS: Bedspread weight crochet thread: 9 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.) Ch 6, join with a s1 st to form a ring. Rnd 1: Ch I, work 12 sc in ring, join with a s1 st in beg sc. Rnd 2: Ch 8 (first 3 chs count as first de of rnd), sk nextsc, de in next sc;" ch 5, sk nextsc, dc in nextsc; rep from • 3 times more, ch 5, sk 1astsc,join with a s1 st in 3rd ch of beg ch-B = 6 ch-5 sps. Rnd 3: Ch 1, • work (sc, hdc, 3 de, hdc, sc) all in next ch-S sp (scallop made); rep from • around, join with a s1 st in beg sc = 6 scallops.
SNOWFLAKE No. 13 FINISHED SIZE: Approx 5" diameter from point to point)
(measured
MATERIALS: Bedspread weight crochet thread: 17 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked on right side-do not turn at beg of rnds.) Ch 8, join with a sl st to form a ring. Rnd 1: Ch 1, work 12 sc in ring, join with a sl st in beg sc. Rnd 2: Ch 4 (counts as first trc of beg cluster), wor k beg cluster in same st as joining as follows: Keeping last lp of each st on hook, work 3 trc in same st as joining (4 Ips now on hook), YO hook and draw through all 4 Ips on hook (beg cluster made). • Ch 10, sk next sc, work a cluster in next sc as follows: Keeping last lp of each st on hook, work 4 trc in next sc (5 Ips now on hook), YO hook and draw through all 5 Ips on hook (cluster
14
Rnd 4: Sl st in next hdc and in next de, ch I, sc in next (center) st of first scallop; • ch 7, sl st in 4th ch from hook (picot made); ch 3, sc in same center st of scallop (where sc was worked before picot); ch 7, sl st in 4th ch from hook (picot made); work (ch 4, sl st in 4th ch from hook) 3 times (3 more picots made); t work (sl st, ch 3, sl sty in ch at base of next picot from hook (Fig I)-picot made t. rep from t to t twice more; ch 3, sc in center st of next scallop; rep from • around, ending last rep without working last sc, join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
•
__
.....
made); rep from • 4 times more, ch 10, sk last sc, join with a sl st in top of beg cluster = 6 clusters + 6 ch-l0 sps. Rnd 3: Ch 1, • work (sc, ch 5, 4 sc, ch 5, 4 sc, ch 5, sc) all in next ch-10 sp (3 ch-f sps made); rep from • around, join with a sl st in beg sc = 18 ch-5 sps. Rnd 4: Ch 2, * sc in next ch-f sp, work a cluster in next ch-5 sp (at point); ch 9, sl st in 5th ch from hook (picot made); ch 4, work another cluster in same ch-5 sp (2 clusters now worked in this same sp); ch 15, sl st in 8th ch from hook (picot made), then work (ch 7, sl st) twice in same (8th) ch from hook (where last sl st was just worked-2 more picots made); ch 6, sl st in top of last cluster worked; ch 9, sl st in 5th ch from hook (picot made); ch 4, work another cluster in same ch-5 sp (3 clusters now worked in this same sp), sc in next ch-5 sp; rep from * around, join with a s1st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
â&#x20AC;¢ No. 12
No. 13
15
No. 14
*
No. 15
SNOWFLAKE No. 14 FINISHED SIZE: Approx 4/1 diameter from point to point)
---.
(measured
MATERIALS: Bedspread weight crochet thread: 13 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked not turn at beg of rnds.)
on right side-do
Ch 8, join with a sl st to form a ring.
Rnd 1: Ch 4 (counts as first trc of beg cluster), work beg cluster in ring as follows: Keeping last lp of each st on hook, work 2 trc in ring (3 Ips now on hook), YO hook and draw through all 3 Ips on hook (beg cluster made). * Ch 4, work a cluster in ring as follows: Keeping last lp of each st on hook, work 3 trc in ring (4 Ips now on hook), YO hook and draw through all 4 Ips on hook (cluster made); rep from * 4 times more, ch 4, join with a sl st in top of beg cluster = 6 clusters + 6 ch-4 Ips. Rnd 2: Ch 4, trc in same st as joining; * ch ,3, work (2 trc, ch 7, 2 trc) in top of next cluster; rep from * 4 times more, ch 3, work 2 trc in top of beg cluster (same st where beg trc was workedwork sts over joining sl st of prev rnd); ch 3, join with a trc in top of beg ch-4 = 12 Ips. (Note: Last lp was formed by working ch 3 and trc, and thread is now in position to beg next rnd.) 16
Fig 1
Rnd 3: * t Ch 5, work 2 trc in 5th ch from hook (rice st made) t: rep from t to t 3 times (3 more rice sts made), sl st in ch at base of 3rd rice st from hook (Fig 1); rep from t to t once (1 more rice st made), sk next ch-3 lp, sc over center of next ch-7 lp; rep from * 5 times more, sk ch-3 of next lp, join with a sl st in top of trc (st used to join prev rnd). Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
FINISHED SIZE: Approx 4W' diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 15 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note:
All rnds are worked
Rnd 3: With right side facing you, join with a sl st over center of any picot lp (between picots), ch 1, sc over center of same lp; • ch 11, sc over center of next picot Ip; rep from • 4 times more, ch 11, join with a sl st in beg sc = 6 ch-ll Ips. DO NOT finish off.
on right side.)
Ch 6, join with a sl st to form a ring. Rnd 1: Ch 3 (counts as first dc of beg cluster), work beg cluster in ring as follows: Keeping last lp of each st on hook, work 2 de in ring (3 Ips now on hook), YO hook and draw through all 3 Ips on hook (beg cluster made). • Ch 4, work a cluster in ring as follows: Keeping last lp of each 8t on hook, work 3 de in ring (41ps now on hook), YO hook and draw through all 4 Ips on hook (cluster made); rep from • 4 times more, ch 4, join with a sl st in top of beg cluster = 6 clusters. Rnd 2: Ch 1, sc in same st as joining; • t ch 6, sl st in 4th ch from hook (picot made); ch 7, sl st in 4th ch from hook (another picot made) t: ch 2, sc in top of next cluster; rep from * 4 times more, then rep from t to t once; ch 2, join with a sl st in beg sc = six 2-picot Ips. Finish off.
SNOWFLAKE No. 16
Rnd 4: S1st over beg of next lp, ch 3 (counts as first de of beg cluster), work beg cluster over same Ip (see Rnd 1for instructions to work beg cluster and a cluster); • work (ch 3, cluster) 4 times over same lp (5 clusters now worked over this same lp with 4 ch-3 sps), work a cluster over beg of next 1p; rep from • around, ending last rep without working last cluster, join with a sl st in top of beg cluster = 30 clusters + 24 ch-3 sps. Rnd 5: Ch 1, * sc in next ch-3 sp, ch 3, work a cluster in next ch-3 sp; work (ch 7, sl st in 4th ch from hook) 3 times (3 picots made); ch 3, work a cluster in next ch-3 sp; ch 3, sc in next ch-3 sp; ch 7, sl st in 4th ch from hook (picot made), ch 3; rep from * around, join with a sl st in beg sc. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
_
FINISHED SIZE: Approx 3~1J diameter (measured from point to point) MATERIALS: Bedspread weight crochet thread: 8 yds white Size 7 steel crochet hook
INSTRUCTIONS (Note: All rnds are worked
on right side.)
Ch 6, join with a sl st to form a ring. Rnd 1: Ch 3 (counts as first de), work 17 de in ring, join with a s1 st in top of beg ch-3 = 18 dc. Rnd 2: Ch 10 (first 3 chs count as first de of rnd), sk next 2 de, dc in next de; • ch 7, sk next 2 dc, de in next dc; rep from • 3 times more, ch 3, sk last 2 de, join with a trc in 3rd ch of beg ch-IO = 6 Ips. (Note: Last lp was formed by working ch 3 and trc, and thread is now in position to beg next rnd.) Rnd 3: Ch 15, work 4 sc over trc just worked (st used to join prev rnd-Fig 1); • work (4 sc, ch 15, 4 sc) over next lp; rep from * 4 times more, work
4 sc over ch-3 of next lp (next to beg ch-I5), DO NOT join = 6 ch-I5 Ips. Rnd 4: Sl st in first ch of next ch-15; ch 5, sk next ch, dc in next ch, work (ch 2, sk next ch, de in next ch) twice; • t ch 7, sl st in 3rd ch from hook (picot made); ch 4, sk next ch, de in next ch, work (ch 2, sk next ch, de in next ch) 3 times t: de in first ch of next ch-I5, work (ch 2, sk next ch, de in next ch) 3 times; rep from * 4 times more, then rep from t to t once, join with a sl st in 3rd ch of beg ch-5. Finish off and weave in ends. Starch and block out to size following General Instructions on page 3.
17