Dengensha Flexwave Welder

NEW

Flexwave Welder NICP Series

Flexwave Welder precisely controls welding current, waveform, and discharge time.

Features Flexible waveform

Flexwave allows “flexible waveform� setting to achieve tempering, demagnetizing, suppressing expulsion and more.

Demagnetization

Less expulsion

Current

Temper

Time Time

Time

Bipolar polarity

Capable of changing output polarity.

Current

During a weld cycle (AC)

Time

On each weld

Time

This prevents nugget position gap and provides demagnetizing weldment, fixture and jig.

Comparison with CDW Weld current comparison

Current

Flexwave

Capacitor Discharge Welder

Time

Eliminate waste current

High efficiency

Highly efficient by recharge only the energy required.

Conventional : Recharge complete capacitor.

Discharge

• Low energy efficiency

Recharge

• Long recharge time Flexwave : Recharge only the discharged energy.

Discharge

High energy efficiency

Recharge

Short recharge time

Shorter recharge time and improved cycle time.

Low Input

The input is almost the same 12kVA as an arc welding machine.

(NICP-150-A) Specifications Model

NICP-050-A

Power supply Average input power Maximum short circuit current

Electrode stroke

12kVA

5kVA 50,000A

Throat dimension Maximum electrode force

NICP-150-A

NICP-100-A THREE-PHASE 460V/480V 50/60Hz 100,000A

150,000A

Gap：200mm Depth：350mm 15kN (at 0.5MPa)

30kN (at 0.5MPa) Total 100mm

Retract 80mm

Welding samples

Ring projection welding

Electricity terminal of the compressor

Ring projection welding (Fuel port)

Ring projection welding (Plate and tube)

welding

Weld-nut on high-tensile steel

Weld-bolt on high-tensile steel

Projection

Application examples ・Body component part ・Engine component part

Automobile

・Motor component

Mild steel

・Compressor

High-tensile steel

・Elevator cage outside panel

Home electronics

Stainless steel

・Battery electrode pillar Furniture and fixtures

Aluminum alloy

・Locker

Steel sheet Plated steel sheet

Dissimilar metal

・Partition ・Drum can

Metal fittings and various metal parts

・Parts for shovel

1 - 23 - 1 Masugata, Tama-ku,Kawasaki-shi,kanagawa-ken,Japan 214-8588 TEL. + 81 - 44 - 922 - 1121 FAX. + 81 - 44 - 922 - 1100 http://dengensha.co.jp

Affiliated Companies U.S.A. U.K. Indonesia Thailand Mexico India

DENGENSHA AMERICA CORP. DENGENSHA EUROPE LTD. PT.DENGENSHA INDONESIA DENGENSHA (THAILAND) CO., LTD. DENGENSHA MEXICO S.DE R.L.DE C.V. DENGENSHA INDIA PVT.LTD.

TEL.+1-440-439-8081 TEL.+44-1543- 481844 TEL.+62 - 267 - 415807 TEL.+6 6 - 2 3 9 9 - 3 2 0 1 TEL.+52-477-717-8827 TEL.+91-44-4221-8350

FAX.+1-440- 439- 8217 FAX.+ 44-1543-481851 FAX.+ 62 - 267 - 415810 FAX.+6 6 - 2 3 9 9 - 3 2 0 4 FAX.+ 52-477-717-8827 FAX.+ 91-44-4221-8222

http://www.dengensha.com/ http://www.dengensha.co.uk/

Distributors China Taiwan Indonesia Malaysia Brazil Russia

信邦有限公司 安徳貿易股份有限公司 PT.UNGGUL SEMESTA PANWELD SDN BHD Libcan-Industrial Automation SVARCON-SERVICE LTD.

TEL.+86 - 20 - 38879382 TEL.+886-2-2600-7505 TEL.+62 - 21 - 8973731 TEL.+60 - 3 - 5637 - 1833 TEL.+55-11-4178-1864 TEL.+7 - 812 - 336 - 2952

FAX.+86 -20 -38879993 FAX.+886-2-2600-7900 FAX.+ 62 - 21 - 8973736 FAX.+ 60 - 3 - 5637 - 2013 FAX.+55-11-4178-1864 FAX.+7- 812 - 336 - 2953

Specifications of product and the appearance have a case to change without notice. No.340NZ01① 1509 500