UPPER ELECTRODE NUT COVERS
N E V E R W E L D AN UPSIDE DOWN NUT AGAIN!
Nuts can end up upside down for a number of reasons – operator error, poor maintenance, worn consumable electrode parts or dirty and oily nuts. Dengensha’s upper electrode nut covers are a simple, inexpensive solution to upside down nut. They are durable and integrate easily with your weld control. Dengensha nut covers detect position errors and prevent expensive damage to your work piece. They fit with any lower electrode and covers for 5, 6, 8 and 10mm square nuts are available from stock. Dengensha nut covers: • Detect position errors • Prevent damage to the work piece • Fit with any lower electrode • Last for months • Integrate with your weld control Please note that projections must be on the outside of the nut. For model recommendations or special-order sizes, call our office.
UPPER ELECTRODE NUT COVERS
The data on this sheet are subject to change without notice
7647 First Place Dr., Bedford, Ohio 44146 P: 440.439.8081 | F: 440.439.8217 www.dengensha.com | sales@dengensha.com ISO 9001:2008 Š 2012 Dengensha America