HARD PARTS

Engine Gasket Sets

Engine Gasket Sets

Quality Vesrah and KP Gasket Sets from K&L Supply offer you and your customers a real alternative to costly factory parts.

Made in Japan to meet or exceed OEM specifications.

K&L MOBILE BENCH

Use as a combination workbench, tear-down table and tool storage facility. Table comes with heavy duty 4” casters (2 rigid & 2 locking swivel). The Table top features a drain hole. Shipping weight: 170 lbs.

Mobile Bench - BLUE

Gasket Scraper

High grade forged steel for rugged service along with strong grip handle. Scrapes surfaces clean for installing new gaskets. 35-4011 Gasket Scraper

K&L

The MC25 is a versatile engine stand that is easily adjustable in both height and width and has the ability to rotate an engine a full 360 degrees. Pan removal, transmissions, and starter clutches are just a few of the services that are easier with the MC25.

High Performance Muffler Packing

For any vehicle with a re-packable muffler. Ideal for 4-stroke mufflers. 16-2511 High performance muffler packing

Muffler Mounting Kit Position 3

Muffler Mounting Kit Position 2

Exhaust Muffler Connecting Gaskets

Made in Japan to meet or exceed OEM specifications. NOTE: Order correct gasket by referring to number shown in illustration. There are four possible locations where muffler connecting gaskets can be replaced. Some applications require two different size gaskets. Sold in pk/5.

Muffler Connecting Pipe Rubber

Exhaust Gaskets And Hardware

Muffler Mounting Kit Position 1

Made in Japan to meet or exceed OEM specifications. Keep your bike running at factory specification & replace leaking exhaust components.

NOTE: ORDER CORRECT GASKET BY REFERRING TO ILLUSTRATION.

Muffler Mounting Kits For Honda

Set Consists of: 5 x Rubber Grommet and 5 x Collar

EXHAUST SEALS FOR OFF-ROAD BIKES

Made in Japan to meet or exceed OEM specifications. Sold in pk/4. Available for the following applications:

Muffler Connecting Pipe Rubbers For Offroad Bikes

Made in Japan to meet or exceed OEM specifications. Sold in pk/2. Available for the following applications:

Muffler Gaskets

1-800-727-6767 KLSUPPLY.COM

Exhaust Pipe Gaskets

Exhaust Pipe Gaskets

HONDA® DUAL SPORT/OFFROAD EXH PIPE

HONDA® TAPPET COVERS

Our Made in Japan covers fit many popular models and are used as Tappet Covers, Crankcase Plugs, Drive Shaft Filler Covers, Gearcase Filler Covers, and Clutch Inspection Port Covers.

12-1552 Replaces 12361-300-000, Includes O-rings, # 91302-001-020 Sold pk/2,

Valve Cover Bolt Seals

Sold pk/10. Made in Japan.

HONDA®

15-0131 90541-195-670 XL/XR/CRF 80 & 100’s

15-0137 90541-MB0-000 VF700C/F/S & GL1200/GL1500

15-7587 90541-371-000

CX500/CX650/GL1000/GL1100

15-0159 90543-MV9-670 CBR600F2/F3/F4/CBR/VTR1000

KAWASAKI®

15-0139 92055-1352

ZX600/ZX750 Ninja ZX6 & ZX7 (all)

15-0149 92200-S015 KSF400/KLX400

SUZUKI®

15-0139 K9205-51352 RM-Z250K4/K5 15-0149 09161-11008 GSX,GSX-R,RF,SV,TL

VALVE COVER BOLT SEALS cont.

CAM END RUBBER PLUGS

Made in Japan. Sold pk/4 and pk/10 as indicated.

KAWASAKI®

15-7588 92066-017-(pk/4) Z1/KZ900/ KZ1000 73-80

15-0121 92066-1552-(pk/4) 92066-1106 92066-1072

®

KZ1000/1100 late model

15-0907 09241-23002(pk/10) GS550/650/750/850 /1000/1100dsfasd

®

1J7-11138-0000-(pk/10) XJ650/XJ750/XS750/ XS850/XS1100

VALVE COVER O-RING SEALS (SPARK PLUG HOLE)

1-800-727-6767

KLSUPPLY.COM

Head Gaskets For Kawasaki Kz1000

Designed

Cylinder Head Cover Bolt Washers

Sold pk/10. Made in Japan.

Valve Cover Gaskets

11 Piece Gasket Hole Punches

Three Bond Tb 1184

Liquid Gasket

Semi-drying visco elastic sealer. Perfect product for sealing joint surfaces with large clearances. Special synthetic rubber provides excellent cushion to absorb vibrations and impacts without failure, especially where coolants are involved. Prevents leakage of water, oil, gasoline, and chemicals. Sold each. NOTE: REPLACES TB1104&TB1194

3.5

Valve Adjustment Shims

K&L VALVE SHIM KITS

K&L has Valve shims for all major brands in kits and single size refills. Our shims “average” 47.0 compared to the 46.0 maximum on the Apparent Rockwell Hardness “C” scale

7.5MM SHIM KITS

All Kits Include five of each size in a storage box

9.5MM SHIM KITS

All Kits Include five of each size in a storage box

7.5 MM REPLACEMENT SHIMS

K&L VALVE SHIMS

K&L shims exceed the maximum of the Apparent Rockwell Hardness “C” scale. Our shims “average” 47.0 compared to the 46.0 maximum. Available in shop kits and individual sizes. K&L Shims are sold in convenient starter kits, with refills available for all individual sizes. (Sold in pk/ 5)

Kawasaki 13mm Diameter

13-7006 Kawasaki 13mm Shim Starter Set (20 Shims) Includes two each of the following sizes and a shim box

13MM REPLACEMENT SHIMS Sold pk/5.

BMW / KAWASAKI / YAMAHA 29MM DIAMETER

13-7007 BMW/Kawasaki/Yamaha 29mm Shim Starter Kit (20 Shims) Includes two each of the following sizes and a shim box

HONDA / YAMAHA / TRIUMPH 25MM DIAMETER

13-7005 Honda/Yamaha/Triumph 25mm Shim Starter Kit (20 Shims) Includes two each of the following sizes and a shim box

25MM REPLACEMENT SHIMS Sold pk/5.

SUZUKI 29.5MM DIAMETER

Suzuki 29.5mm Shim Starter Kit (20 Shims) Includes two each of the following sizes and a shim

29.5MM REPLACEMENT SHIMS Sold pk/5.

Valve Lapping Tool

The ultimate vacuum stick for perfect surfaces on valves and valve seats. Interchangeable cups make unit suitable for use with virtually any size valve. Set includes vacuum stick, 3/4” and 1/4” rubber cups.

35-8998 Valve Lapping Tool

Valve Lapping Tool Set

Features beaded wooden dowel for non-slip rubber vacuum cups.

35-5920 Valve Lapping Tool Set

Engine

VALVES / VALVE STEM SEALS / KEEPERS

Engine Valve Dimensions

Valve Stem Seals

Valve Stem Seals are sold pk/10. Made in Japan.

Valve Keepers

Valve Keepers are sold pk/25. Made in Japan.

HONDA®

14-1750 14781-107-003 (sold each)

KAWASAKI®

14-4123 12011-004

Kwikloader Valve Keeper Tool Set

The Kwik-Loader cuts valve installation and removal time drastically. It’s compact and easy to use design replaces bulky C-clamp style compressors.

35-3568 Kwikloader Valve Keeper Tool Set

ENGINE VALVES, VALVE STEMS SEALS & KEEPERS

Made to meet or exceed OEM specifications. Made in Japan.

NOTE: ENGINE VALVES ARE SOLD EACH. VALVE STEM SEALS ARE SOLD PK/10. VALVE KEEPERS ARE SOLD PK/25. *EXCEPT 14-1750* SOLD EACH

ENGINE VALVES / VALVE STEM SEALS / KEEPERS

14-3607 ———

KRT750BCF Teryx EPS 2012 ——— ——— 14-3607 ———

KRT750DCF Realtree 2012 ——— ——— 14-3607 ———

KVF750 Brute Force 4X4i 05-12 ––––––– 14-3607 ––––––

KVF750B1/E Brute Force 05-09 ——— ——— 14-3607 ———

KVF750EAF Realtree 05-09 ——— ——— 14-3607 ———

KVF750G~J BruteForceEPS 2012 ——— ——— 14-3607 ———

KAWASAKI

DUAL

ENGINE VALVES / VALVE STEM SEALS / KEEPERS

SUZUKI® STREET APPLICATION YEAR INTAKE VALVE EXHST. VALVE VALVE STEM SEAL VALVE KEEPER

YAMAHA® STREET APPLICATION YEAR INTAKE

ENGINE VALVES / VALVE STEM SEALS / KEEPERS

YAMAHA® WATER SPORTS/ SNOW MOBILE APPLICATION

Special Order Any Kibblewhite Product

Kawasaki Tach Seal Kit

Made in Japan. 4 pc. Tach Seal Kit contains the following parts:

15-2435 Kawasaki Tach Seal Kit

15-2444 92050-075 Seal only pk/10

KAWASAKI

Motion Pro Piston Pin Puller

• Pin adapters made of 6061 aluminum

• Fits 12mm (1/2”) - 24mm

• Works on full/short

Piston Base Holders

Sold each.

35-9810 3/16” thick x 5-1/4” length

35-9811 1/2” thick x 6-3/4” length

Piston Ring Filer

File piston rings with this portable rotary file. Use to accurately size any make or diameter ring.

Valve Stem Seal Installers

Designed for the installation of Valve Stem Seals on modern Shim Under Bucket 4-stroke Street, ATV and Dirtbike heads. These tools can hold up to 4 Valve Stem Seals and load them onto the valve guides in under 15 seconds. Sold each.

35-2707 Valve Stem Seal Installer Set of 4

35-2771 Valve Stem Seal Installers (4.0)

35-2773 Valve Stem Seal Installer (4.5)

35-2776 Valve Stem Seal Installer (5.0)

35-2778 Valve Stem Seal Installer (5.0 Hayabusa)

Piston Rings For Street

Made in Japan by TP (Teikou) & NPR to OEM specifications. Each set contains rings for one piston. Std sizes only.

Cam Chains

Cam Chains

High quality Cam Chains that are Made in Japan for K&L Supply. Cam Chains listed are sold each and do not include Master Link. Master Links are sold EACH and in pk/10. IMPORTANT NOTE: ALL CAM

ARE

Cam Chain Applications

Honda Oil Pump Chains

Camchain Tensioner Tool For Yamaha

2007-2012 R-1

Here’s a better way to make a common job faster and easier. This tool allows easy re-setting of the cam chain tensioner mechanism on the Yamaha R-1. The threaded C-Clamp design lets you gradually compress the unit, making re-installation of the tensioner easier. A rubber pad at the receiving end of the tool prevents marring or scratches, while the body of the tool includes a convenient tab that makes it possible to mount it in a bench vice for hands free operation.

35-6571 R-1 Tensioner Tool

Timing Belt For Honda Goldwing

Cam timing belt for GL1000/1100/1200/1500. Sold each.

HONDA®

15-1449 14400-679-004, 14400-679-014X

GL1000 Goldwing 75-79

GL1100 Goldwing 80-83

15-0114 14400-MG9-004, 14400-MG9-000

GL1200/A/I/L/SEi 84-87

15-1459 14401-MN5-004 GL1500/A/I/SE 88-00

Timing Belt Cover Gasket For Honda

Front rubber timing belt cover gasket for Honda GL1000/1100 Goldwing. Sold pk/2.

BEARING RACE & SEAL DRIVER

Insert bearing races quickly and straight on the first try. Six disc sizes fit most bearing sizes. To install (drive) seals, turn discs over. Eliminates damage to bearing races. Seven piece kit includes driver handle and the following disc sizes: 40, 45, 50, 59, 63, and 65mm.

Oil Seal Pullers

Remove fork seals and engine seals.

35-5398 Seal Puller with two tips

35-9614 Adjustable Seal Puller with two tips

35-9268 Bearing Race & Seal Driver

Crankshaft Oil Seals

Genuine ARS/Koyo/NOK replacement engine oil seals. These engine oil seals are exact replacements for most of the applications listed. Made in Japan. Sold in packs of 4.

K&L ENGINE OIL SEAL KITS

Made in Japan. Kits available for the following models:

Engine Bearings

OEM quality Crankshaft Main Bearings. Made in Japan. Sold each.

Motion Pro Crankcase Pressure Tester

An accurate method for checking air leaks on two-stroke engines. Complete with air pressure gauge, pump-up bulb and most fittings and adapters for single and multi-cylinder two-cycle engines.

35-5962 Motion Pro Crankcase Pressure Tester

MOTION PRO 4-STROKE LEAKDOWN TESTER

Check percentage of cylinder leakage in a 4-stroke engine. Kit includes 10, 12, and 14mm spark plug adapters, regulator and gauge. 35-1987 Motion Pro 4-Stroke Leakdown Tester

ALTERNATOR/DYNO/GENERATOR COVER GASKETS

Sold in pk/2. Made in Japan.

16-1574

16-1588 11397-300-306 (Alternator Cover Gasket)

16-3845 11691-425-306 (Alternator or Generator Cover Gasket)

Three Bond Tb 1211 Silicone Liquid Gasket Sealant

Tough durable sealer utilizing silicone rubber as a primary component. White in color. Ideal for numerous applications where a long-lasting faultless seal is absolutely critical. Tack free in 90 minutes, fully cured and bonded within 24 hours, attains optimum strength in three days. Sold each.

35-3390 3.5 oz. tube

Three Bond Tb 1184 Liquid Gasket

Semi-drying visco elastic sealer. Perfect product for sealing joint surfaces with large clearances. Special synthetic rubber provides excellent cushion to absorb vibrations and impacts without failure, especially where coolants are involved. Prevents leakage of water, oil, gasoline, and chemicals. Sold each.

NOTE: REPLACES TB1104&TB1194

35-3388 3.5 oz.

Starter Clutch Rollers / oil pan gaskets / cover gaskets

Starter Clutch Rollers

KAWASAKI® 20-6433

OEM REFERENCE NUMBERS: 92081-110 Spring Cap

Spring

Roller

OEM REFERENCE NUMBERS:

Spring Cap

Spring

These handy kits include the Rollers and Springs needed to restore the function of your worn starter clutch. Fits many popular models. Made in Japan. KAWASAKI

OEM REFERENCE NUMBERS:

Oil Pan Gaskets

Sold

Engine Point Cover Gaskets For Kawasaki Kz

Replacement gaskets for right side points holder cover (inner) and outside point cover. Sold pk/2. Made in Japan.

K&L

Made in Japan to meet or exceed OEM specifications. Sold each.

Waterpump Seals

K&L WATERPUMP MECHANICAL SEALS CONT.

Waterpump Seal Installation Tool

This tool properly installs the mechanical water pump seal on Yamaha XZ550 Vision, XVZ12/13 Venture & Venture Royale and Genesis series engines.

35-8398 Waterpump Seal Installation Tool (YM-33221-A)

Mechanical Seal Installation Tool

This tool allows you to properly install a mechanical seal into the cover without damaging the seal.

35-2618 Mechanical Seal installation Tool

ALDEN DRILL-OUT POWER EXTRACTORS

Made of high quality tool steel. Drills are tough enough to extract grade 8 and 10.9 class stainless steel bolts. Alden drill-outs feature a “self centering” tip to eliminate wandering, even on rough surfaces. Drill-Outs exclusive two piece design makes removing broken bolts a fast and simple one step procedure.

35-0480 ALDEN Drill-Out Power Extractor (4 piece set: 6/8/10/12mm)

35-0485 ALDEN Drill-Out Power Extractor (4 piece set: 3/4/5/6mm)

35-0490 ALDEN Drill-Out Power Extractor (7 piece set : 3/4/5/6/8/10/12mm)

Water Pump Shaft Oil Seals For Yamaha

OEM quality replacement Seals. These replacement oil seals are exact replacements for the applications listed. Made in Japan. Sold pk/4.

K&L WATERPUMP SEALING KITS

Made in Japan. Kit contains all necessary gaskets, O-rings and seals to repair oil leaking into waterpump (oil leakage).

NOTE: MECHANICAL SEAL NOT INCLUDED.

Impact Driver

Heavy duty impact driver for general use. Reversible, tighten screws or bolts on impact or loosens frozen ones easily. Complete with 4 bits-No. 2 and No. 3 Phillips bit, 8 and 10mm slotted bits and metal storage case.

K&L CLUTCH SLAVE CYLINDER REPAIR KIT

Kit includes push lever seals, clutch pushrod oil seal, spring and bleeder bolt cap. Made in Japan.

Slave Cylinder Repair

K&L CLUTCH SLAVE CYLINDER REPAIR KIT cont.

YAMAHA®

32-0128

Clutch Slave Cylinder Repair Kit

CLUTCH & PRIMARY TOOL

6mm bolts supplied with 5/8” through bolt. This tool is for removing clutch bodies, flywheels and primary gears. Works on ACTION, COBRA, LEM,KTM, and ITALJET

Pee-Wee racer 50cc applications.

35-8605 Clutch & Primary Tool. 7 Hole Special Disk #MP51

Clutch Holding Tool Locking Vise Type

Vise type tool will hold inner clutch hubs, gears, sprockets and flywheels (using pins opposite jaws side). Carbon steel with heat treated jaws and nickel finish. Max. 130mm(5”) jaw opening.

35-6891 Clutch Holding Tool Locking Vise Type

K&L BLEEDER BOLT RUBBER CAPS

Sold pk/10. Made in Japan.

33-1149 Brake Bleeder Bolt Rubber Caps

Ebc Dot 4 Brake Fluid

Aluminum Oil Drain Plug Washer Assortment

Kit contains 75 pieces, 25 pieces each from applications listed. Made In U.S.A.

Kit-75 pieces. Replacements sold in pk/25.

General purpose glycol fluid with wet boiling point of 260°C/500°F for modern motorcycle brake systems. Sold in 8.8 oz. bottle. NOTE: CANNOT BE MIXED WITH DOT 5 SILICONE FLUIDS.

35-7123 Dot 4 Brake Fluid

Radiator Cap

Universal offroad applications. Fits small round neck radiators. 1.1 rating equals 16 lbs. Made in Japan. Sold each

26-4703 Radiator Cap 0.9

26-4704 Radiator Cap 1.1

15-8484

RED LINE WATER WETTER & SUPERCOOL

Smaller Sizes Available

Not included in Kit. Sold in packs/10.

8mm 90471-580-000

Oil Drain Bolt - CRF250/450, TRX450R/ER

Final Drive Drain Bolt - CB, CX, GL, ST, TRX, VF, XL, XR models

15-8488

8mm 92022-1086 8.3x16x 1.2mm

Suzuki 8mm 09168-08029

Final Drive Drain Bolt - KZ/VN/ZG models.

Valve Cover Oil Bolt - GSX/GSXRV

15-8489 Suzuki 6mm 09168-06004 6.3x11x 1.2mm Yamaha 6mm 90430-06016-00

Oil Level Inspection Bolt, Water Pump Drain Bolt

Oil Level Inspection Bolt - YZ, XV 16/17/19

Doubles the wetting ability of water and improves heat transfer. Water Wetter is a concentrate, SuperCool is ready to use as is. NOTE: WERA, AFM, CCS & AMA APPROVED. Sold each 35-2062 Water Wetter. 12fl. oz. bottle,

Redline Racing Funnel

Oddly shaped funnel allows pouring of oil or coolant around bodywork to reach hard to get to filler openings. Pours in both vertical and horizontal positions.

35-2115 Red Line Racing Funnel

Clutch Cover Gaskets

One Way Starter Clutch Bearing

Manufactured by the same OE manufacturer as the OEM part. Made in Japan using highest quality components. Easy to read marked arrows to ensure proper installation without confusion.

20-6453 13194-1094

20-6454 12600-19810

20-6435 4H7-15580-10-00

20-6436 1UY-15590-01-00

20-6437 5KM-15590-00-00

Clutch Center Hubs

17-5407 22120-KRN-A00

17-5452 22120-ML3-911

17-5457 22121-GBF-830

17-5458 22120-KZ3-860

17-5458 22120-KZ3-861

17-5458 22120-KZ3-862 17-5458 22120-KZ3-B10

Clutch Spring Sets

K&L CLUTCH SPRINGS

K&L clutch springs are 10% stiffer than stock.

CLUTCH SPRINGS ARE SOLD IN SETS.

WHEN ORDERING CLUTCH SPRINGS ORDER QT 1 SET ONLY.

Clutch Fiber Kits

These high quality Clutch Fiber Kits sourced directly from OEM suppliers FCC in Japan. Kit contains all the fiber clutch plates required for each model listed.

(FIBER CLUTCH PLATES MUST BE SOAKED IN CLEAN ENGINE OIL BEFORE INSTALLATION)

Clutch Spring Sets

K&L CLUTCH PLATES

K&L Supply is proud to offer these high quality plates from one of the leading clutch manufacturers in Japan, giving you the highest quality available. K&L offers friction plates and metal drive plates. NOTE: FRICTION PLATES AND METAL DRIVE PLATES ARE SOLD EACH. PLEASE NOTE THAT SOME APPLICATIONS REQUIRE MORE THAN ONE TYPE OF FRICTION PLATE. SPECIFY QUANTITY AND PART NUMBER REQUIRED WHEN ORDERING.

Adjustable Holding Tool

This adjustable holding tool is designed for holding flywheel magnetos. For dirt bike and scooter applications.

35-9807 Adjustable Holding Tool

8 LB. MAGNETIC PICK UP TOOL

This is a more powerful version of a workshop staple. Able to lift up to eight pounds, the pick-up extends to 24”. A pocket clip allows you to easily carry it with you so it is always there when you need it.

35-7955

Flexible Magnetic Pickup Tool

Rigid flexible pickup tool bends to any position and stays there. Great for small parts in blindspots and other hard to reach places. 1.5lb capacity magnetic head is only 5/16” (8mm) in diameter.

35-7950 Shape Shifter Magnetic Tool

K&L

Mobile exhaust collection system unit will provide a safe working environment while running engines indoors. Just connect the rubber collector ends to the engine exhaust pipes and route the blower hose outside of the building. Blower extracts exhaust fumes at low rpm. Additional length of hoses are available to suit specific needs. NOTE: NOT SUITABLE FOR USE WITH DYNOMOMETERS.

FEATURES INCLUDE:

• Two 3” x 5‘ intake hoses with heat resistant rubber collectors

• 110 volts

• Cabinet size 24” L x 16” W x 25” H

• Top storage Cabinet size 24” L x 16” W x 3” D

• Motor specs. 115v/60Hz x 6.4A x 3410rpm x 1/2hp

• Max. volume 20m3/min(CMM) or 706 ft3/min(CFM)

37-9648 K&L MC750 Mobile Exhaust Collector. NOTE: NOT SUITABLE FOR USE WITH DYNOMOMETERS.

35-9647 Optional 10’ x 3” Intake Hose

35-9671 Replacement 5’ x 3” Intake Hose

35-1338 Optional 32’ Hose x 4” Exhaust Hose

35-9661 Optional Oval Hose End Adapter Attaches hose to end of muffler Sold each.

35-7125 Optional Exhaust Gas Hose Holder

CLUTCH PUSH ROD LEVER BEARING & SEAL SET

Kits include needle bearings and oil seals.

Emgo Oil Filters

spin-on

YAMAHA® EMGO # OEM P/N NOTES

19-0247 10-28401 1L9-13441-11-00 Oil filter only

19-6147 10-79120 1UY-13440-02-00 Oil filter only

19-5014 10-82230 3FV-13440-0000/5GH-13440-00-00 Black spin-on

19-5016 10-82220 3FV-13440-00-00 Chrome spin-on

19-6252 10-79100 4X7-13440-90-00 Oil filter only

19-6149 10-79110 5H0-13440-09-00 Oil filter only

19-5030 10-82250 5DM-13440-09-00 Black spin-on

19-5043 10-79130 5TA-13440-00-0 Oil filters only

19-5036 10-28510 1J7-13440-90-00 Set of 2 o-rings only

Emgo Oil Filters

Without Oil Cooler

Emgo Oil Filters

Emgo Oil Filters

Fluid Evacuator

The Fluid Evacuator is a portable, hand operated transfer system with a 6.5 liter (1.7 gallon) capacity. The reservoir is made of polyethylene, and can safely hold oil, coolant, and brake fluid.

35-9042 Fluid Evacuator

35-9334 Fluid Evacuator Brake Bleeding Accessories Kit

35-9332 Extended Tube Kit. Kit include 5.7, 6.6 and 10mm tubes in longer 8ft lengths

FLUID EVACUATOR: COMPRESSOR TYPE

Operates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs. Compressed air hose attaches at base for stability. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/ clutch bleeding kit (Model No. 07205) for vacuum bleeding hydraulic brake and clutch systems

35-9129 Fluid Evacuator-Compressor Type

Mini Fluid Evacuator

Operates on compressed air to create a powerful venturi vacuum for quickly evacuating small reservoirs. The lid un-threads for convenient emptying, and the evacuation hose is perfect for getting into those hard to reach places.

35-4861 Mini Fluid Evacuator

Fluid Evacuator Plus

At the push of a button, this unit changes from vacuum to pressure for evacuating or dispensing fluids. This functionality makes it ideal for draining tanks or reservoirs then pumping the used fluid back out for easy disposal. Automatic shut-off prevents overfilling, for superior mobility, this unit utilizes a manual pump so compressed air or electricity is not required. Includes wands to drain engine oil & transmission fluid directly through the dipstick. 2.3

Gallon Capacity (8.8 liters)

35-9144 Fluid Evacuator Plus

Oem Type Oil Filter Socket Wrench

Designed to remove and install OEM spin-on oil filters. Sold each. IMPORTANT NOTE: WILL NOT FIT FRAM OIL FILTERS. Available for the following models:

35-4980

Fits Honda Oil Filter 15410-MM9-013

Fits Kawasaki Oil Filter 160971061/1063/1064

Fits Yamaha Oil Filter 3FV-13440-00-00, 5GH13440-00-00 and 5JW-134440-00-00

35-4981 Fits Suzuki Oil Filter 16510-06B01, Yamaha

“5DM” style

35-4983 Ducati/BMW/H-D 76mm x 8 flute

55 Gallon Drum Cart

This Mobile Oil Pump Kit makes oil projects easier to complete. Durable, portable unit comes complete with digital oil control valve and meter. The sturdy cart can support up to 400-lb. drum (including a standard 55-gallon drum) and includes reel with a 1/2in. x 50ft. hose. Suitable for dispensing oil at medium/high viscosity for mobile installations and fixed system at medium distances. Works on any size drum with a 2in. bung adapter.

39-8367 55 Gallon Oil Drum Cart

Drum Funnel

Eliminate overspills while pouring. Large surface area permits drainage of multiple containers simultaneously. Highly durable, it will resist rust, dents and other chemicals. Fits 55 gallon drums.

39-8362 Drum Funnel

39-8362

RED LINE MOTORCYCLE, RACE, & STREET OILS

These Motorcycle specific oils feature extra phosphorus and zinc for increased antiwear properties, with a modified additive package that gives even greater wet-clutch operation than before. Sold each.

35-2258 Motorcycle 10W40, qt

35-2259 Motorcycle 20W50, qt

35-2487 HD (V-Twin) Synthetic Motorcycle 20W60, qt

Red Line Shock Proof Gear Oil

Unique GL-5 gear oil contains a unique solid dispersion which cushions gear teeth to help prevent tooth breakage, allowing the use of lower viscosities. Race and dyno-proven to reduce friction and wear. Recommended for heavily-loaded racing transmissions. (motocross, road racing & kart racing)

35-1962 Super Light Weight

35-8622 Heavy Weight 35-1809 Light Weight

Street Oils

Offer high degrees of protection and cleanliness across a wide range of conditions and temperatures. Sold each.

ADJUSTABLE OIL FILTER WRENCH 64–79mm

Removes spin-on type oil filters from 2-1/2” to 3-1/8”. Steel jaws grip oil filter without slipping. Works with any 3/8” ratchet drive.

35-9815 Adjustable Oil Filter Wrench 64-79mm

Race Oil

Provides the best high-temperature lubrication and has a higher film strength than any petroleum or synthetic product. Not recommended for Street use. Sold each.

35-2134 Race SAE30W, qt

35-2005 Race SAE40W, qt

35-2021 Race SAE50W, qt

K&L STOCKS RED LINE OIL

Oil Filler Cans

These tough, durable plastic cans are Made in Japan.

39-3912 1 liter can 39-3913 2 liter can 39-3914 5 liter can 39-3915 Replacement Spout and nut.

COOLANT RECOVERY TANK, 275CC

• Prevents loss of coolant due to overheating

• Works on most water-cooled motorcycles, snowmobiles, and ATV’s

• Designed for hot weather and/or high-altitude riding conditions

• Compact, versatile, high density polyethylene bottle

• Built in mounting holes provide multiple mounting options

• Bottle cap is constructed from chemical-resistant rubber for durability and easy installation/removal

• Includes 275cc bottle, hose, clamps, mounting ties and instructions

• Bottle dimensions: H (w/cap) 5 1/2” x W 3 3/4” X D 1 7/8”

35-5965 Coolant Recovery Tank

Redline Racing Funnel

Oddly shaped funnel allows pouring of oil or coolant around bodywork to reach hard to get to filler openings. Pours in both vertical and horizontal positions.

35-2115 Red Line Racing Funnel

RATIO-RITE MEASURING CUP

Measures in ounces and cc’s. Use for filling forks, shocks, engine oil, etc. Also has ratio scale for accurate oil/gas premixing. Sold each.

NOTE: LID IS SOLD SEPARATELY.

39-4061 Ratio Rite Measuring Cup

39-4062 Lid for Ratio Rite

OIL & GAS FUNNELS

35-3583 Oil Filler Funnel. Long straight 18” funnel, great for filling engine oil in hard to reach locations.

2 Quart Funnel w/filter Screen. Large funnel with built in filter screen. Great for filling 5 gallon gas jugs.

Longneck Funnel

Funnel has 5.5” opening x 5” tall with an 18” flexible extension that makes pouring fluids much easier and cleaner than traditional types. Extension also can be removed if desired. Sold Each.

35-3580 Longneck Funnel with Spout

Graduated Cylinders

Plastic beakers, graduated in cc’s. Made in Japan. Two sizes:

1/2 PINT FUNNEL

This small (3.5” x 4”) funnel is the right size for those jobs where automotive sized models are too big and bulky. Keep several in the shop for various fluids, great for retailing as well. Sold Each.

35-3581 1/2 Pint Funnel

Integrated shutoff valve allows precise amount of liquid to be dispensed. Graduation marks for cubic centimeters, fluid ounces and premix ratio 1000cc (34oz) capacity. Easy to understand premix ratio graduations for 32:1, 40:1, 50:1, and 60:1 for 1 to 3 gallons Adjustable ball-pivot spout allows easy, spill-free filling.

35-8687 Motion Pro Pro Funnel

7 Quart Drain Pan

Low height makes this pan easy to slide under cases and the flat base helps keep things stable on the table. Molded in handles make carrying easy, great for over the counter sales as well.

Measures 13.5” x 11.7” x 4”

35-7796 7 Quart Drain Pan

Metric Copper Washers

Designed to replace the O.E. Reference numbers listed. These hard to find sizes of Fork Damper Bolt and Drain Plug Washers are now available in convenient 10 packs.

15-8300 Complete Kit (replacements sold in pk/10) Kit contains 80 pieces, 10 pieces each from applications listed.

Oil Filter Bolts

Oil Drain Plug Bolts

These oil drain plug bolts come with magnetic insert and washer. Head of bolt is pre-drilled for adding safety wire. ATV and offroad applications. Available in the following sizes: