2022 GENUINE ACCESSORIES & APPAREL
OFFROAD PERFORMANCE
* PROFESSIONAL RIDER ON A CLOSED COURSE
OFFROAD PERFORMANCE 01 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
•K awasaki cautions you that whenever the power output of a motorcycle is increased, reliability and durability may decrease. Therefore, proper and perhaps more frequent maintenance and repair work becomes especially important. The Kawasaki Service Manual contains information that will help enable you to perform essential maintenance and repairs. This manual can be obtained from any authorized Kawasaki dealer or online at Kawasaki.com. • I nstallation of race parts requires mechanical knowledge, proper tools and, in some cases, the re-tuning of engine and suspension components. For best results, an experienced tuner should make racing modifications. You may wish to take your vehicle to an authorized Kawasaki dealer to have race parts installed on your motorcycle. There will be a charge for installation. •P rices, product and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand. The purchaser accepts all responsibility concerning installation of race parts, including quality, performance, cost or service and/or necessary repairs. • Kawasaki Accessories or other items in this Performance Parts section are subject to the following conditions: • These items are intended for closed-course competition only. •A lteration of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use. • Use of unauthorized components and use of a vehicle in competition can affect a vehicle’s warranty coverage. • Kawasaki Accessories used in competition are not covered by any warranty and are not returnable. • Quantities may be limited and replacement parts may not be available.
OFFROAD * PROFESSIONAL RIDER ON A CLOSED COURSE 01 WWW.KAWASAKI.COM
KX™ FI CALIBRATION KIT (HANDHELD)
KX™ 450 (19+) requires Sub Harness (26011-0933) and Tube Clamp (92037-1794) to operate • KX™ 250F (13-18), KX™ 450F (09-10) and (12-18), KX™ 250 (19+) requires Sub Harness (26011-0933) and Bracket (11056-0505) to operate
KX™ FI CALIBRATION KIT
CALIBRATION KIT
The KX™ FI Calibration Kit features a handheld KX™ FI Calibration Controller which enables riders to adjust engine characteristics, by rewriting actual data maps, to suit their preference • Use without a PC: simply plug the KX™ FI Calibration Controller in the engine’s ECU • Built-in color LCD screen with easy-touse interface • SD card compatible for data transfer of maps between the controller and a PC • Seven preset settings for easy ECU adjustment to suit track conditions • ECU maps for fuel injection volume and ignition timing based on throttle position and rpm • The KX™ FI Calibration Controller displays the status of a running engine when connected to the ECU • Water-resistant • Includes transfer and diagnostic cables, SD memory card, user manual, and carrying case • Requires Sub Harness (260110933) and Bracket (11056-0505) to operate • Fits KX™ 250F (13-18), KX™ 450F (09-10) and (12-18), KX™ 250 (19-20), KX™ 450 (19-20) • Does not fit KX™ 450F (11) The KX FI Calibration Controller contains seven preset settings that can be quickly and easily used to adjust the ECU to suit track conditions. The provided settings are shown below. KX™450 (19+), KX™450F (12-18), KX™450F (09-10), Does not fit KX™450F (11), KX™250 (19+) , KX™250F (13-18),
KX™ FI Calibration Kit (Handheld) _____________________________99999-0615 Sub Harness ____________________________ 26011-0933 Tube Clamp KX™450 (19+) _________________ 92037-1794 Bracket(09-18) __________________________11056-0505
TUBE CLAMP SUB HARNESS
BRACKET
SUB HARNESS Connects KX™ FI Calibration Kit (Handheld) (999990615) to the main vehicle wiring harness KX™450 (19+), KX™450F (12-18), KX™450F (09-10), Does not fit KX™450F (11), KX™250 (19+) , KX™250F (13-18),
SETTING DESCRIPTION
Sub Harness_____________________________ 26011-0933
RICHER FUEL SETTING FUELLING
5% RICHER THAN STOCK
LEANER FUEL SETTING FUELLING
5% LEANER THAN STOCK
ADVANCED IGNITION SETTING
IGNITION ADVANCED 3O FROM STOCK
RETARDED IGNITION SETTING STOCK
IGNITION RETARDED 3O FROM STOCK
HARD RIDING SURFACE SETTING
IGNITION RETARDED, FUELLING RICHER
SOFT RIDING SURFACE SETTING
IGNITION ADVANCED, FUELLING LEANER
REDUCED POWER SETTING
ENGINE POWER SUPPRESSED: IGNITION RETARDED, FUELLING RICHER
TUBE CLAMP Attaches 2019-2020 Sub Harness (26011-0933) to the vehicle frame KX™450 (19+)
Tube Clamp_____________________________ 92037-1794
BRACKET Attaches KX™ FI Calibration Kit (Handheld) (999990615) to the vehicle frame KX™450F (12-18), KX™450F (09-10), Does not fit KX™450F (11), KX™250 (19+) , KX™250F (13-18),
Bracket_________________________________11056-0505
02
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 02
KX™ FI CALIBRATION KIT (HANDHELD)
HANDLEBAR CLAMP
HANDLEBAR CLAMP
03 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
Used on the KX™ 450SR and Monster Energy®️ Kawasaki race team • The Xtrig PHDS (Progressive Handlebar Dampening System) is a system supported by elastomers designed to absorb engine and chassis vibrations • The system also dampens the forces acting on the handlebar in a horizontal and vertical direction, maintaining steering precision • The handlebar can be adjusted in 12 different positions when the PHDS is mounted • Precision machined and manufactured KX™450 (22)
Handlebar Clamp________________________99969-3881
FORK CLAMP Used on the KX™ 450SR and Monster Energy®️ Kawasaki race team • The XTrig Revolutionary Opposed Clamping System (ROCS) was designed to clamp the upper fork tubes from opposite directions to hold the tubes more evenly and securely • This design reduces inner tube distortion and allows the fork to flex naturally • The triple clamp system’s flexibility is adapted specifically to the forks and chassis which results in improved front wheel traction and positive feedback • Handlebars can be mounted in 12 different positions with the included Progressive Handlebar Dampening System (PHDS) handlebar mounts
FORK CLAMP
Features:
• Opposing bolts allow for precise clamping of the fork tubes • Split clamps improve the bending line of the forks which improves fork response • CNC manufactured from high-grade aluminum • Steering head bearing already mounted on steering stem with standard offset • Lightweight thanks to the removal of material between clamping screws • Progressive Handlebar Dampening System (PHDS) KX™450 (22)
Fork Clamp_____________________________ 99969-3880
HINSON CLUTCH COVER The Hinson Clutch Cover is precision machined from billet T-6 aircraft quality aluminum making it stronger than stock • The Hinson Clutch Cover increases oil capacity in the transmission which helps dissipate heat for maximum performance • To help your motorcycle perform optimally the Hinson Clutch Cover directs oil back into the case, keeping the operating temperature cooler • Race proven worldwide by the Kawasaki Racing Team • Improves heat dissipation • Stronger than stock • Oversize covers increase oil capacity in transmission and direct oil back in clutch, both features greatly increasing heat dissipation • Precision machined from billet T-6 aircraft quality aluminum to aerospace tolerances KX™450 (22)
Hinson Clutch Cover______________________99969-3879
03 WWW.KAWASAKI.COM
HINSON CLUTCH COVER
PRO CIRCUIT EXHAUST PIPE
Features Include:
PRO CIRCUIT MUFFLER
• Passes AMA/FIM sound regulations • Titanium construction throughout head pipe and mid pipe • Machined mid pipe to head pipe joint for a better, leak free fit • Rubber bracket mount • TIG precision welding • Made in the USA KX™450 (22)
Pro Circuit Exhaust Pipe__________________ 99969-3882
PRO CIRCUIT MUFFLER Pro Circuit's Ti-6 Pro Titanium Exhaust System was created for professional racers competing in a series such as AMA Supercross or AMA Motocross to ensure they pass AMA/FIM sound regulations • The Ti-6 Pro Titanium Exhaust System is constructed of titanium throughout the canister while the end-cap is carbon fiber • The Ti-6 Pro is the next generation of professional level race exhausts For the 2019-2021 models, a rubber mount has been inserted into the bracket to help prevent potential cracking of the subframe. The Ti-6 Pro is a full race system intended for closed-course racing only. Features Include:
• Passes AMA/FIM sound regulations • Titanium construction canister • Carbon fiber end-cap • Equipped with RC-4 Resonance Chamber • Machined aluminum muffler bracket for increased strength and durability • Asymmetrical muffler configuration for increased packing volume • TIG precision welding • Made in the USA KX™450 (22)
Pro Circuit Muffler________________________99969-3878
04
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 04
PRO CIRCUIT EXHAUST PIPE Pro Circuit's Ti-6 Pro Titanium Exhaust System was created for professional racers competing in a series such as AMA Supercross or AMA Motocross to ensure they pass AMA/FIM sound regulations • The Ti-6 Pro Titanium Exhaust System is constructed of titanium throughout the head pipe and mid pipe • The Ti-6 Pro is the next generation of professional level race exhausts The Ti-6 Pro is a full race system intended for closed-course racing only.
KX FI CALIBRATION CD MANUAL AND DATA
AIR PUMP
KXTM FI CALIBRATION CD MANUAL AND DATA
05 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
This KX™ FI Calibration Kit enables you to adjust the fuel injection amount and ignition timing by connecting this to the vehicle's ECU (electronic control unit). By repeating the change of setting, you may obtain the optimum engine setting fit for the course, weather and rider's performance. KX™450 (09-21), KX 250 (11-21)
KX FI Calibration CD Manual and Data_______57011-0004
AIR PUMP Mini pump with 203mm (8") flex connector and a 0-60 psi gauge for servicing air forks and air shocks • Pressure can be lowered without removing pump • One-way check valve prevents pressure loss when pump is removed • For vehicles with air adjustable suspension
OPTIMATE TM-471 LITHIUM BATTERY CHARGER .8A
KX™450F (13-18)
Air Pump______________________________ K56019-060A
OPTIMATE TM-471 LITHIUM BATTERY CHARGER .8A The OptiMate TM-471 Maintenance Charger by TecMate • The OptiMate TM-471 is a 0.8 amp charger • It charges and/or maintains most 12V lithium batteries • Unique LiFePO4 battery protection 8-Step Program
1. Low volt start (0.5V) 2. Ultra low volt save 3. Low volt save cell monitoring 4. Test cell damage 5. Cell-balancing charge 6. Optimize 7. Test after charge 8. OptiMate maintenance KX™450 (19+)
Optimate TM-471 Lithium Battery Charger .8A________________________ C57001471
RK EXW GREEN RACING CHAIN RK's top of the line XW ring chain with an exclusive green finish that is only available from Kawasaki • Chromoly steel construction with solid rollers and bushings • Clip-type link KX™450F (06-14), KLX®450R (08-09), KX™250F (0414), KFX®450R (08-14)
NM520EXW-120 Green Chain_______________ K11001-221
05 WWW.KAWASAKI.COM
RK EXW GREEN RACING CHAIN
SIDE PANEL (GREEN)
FRONT / REAR FENDER (GREEN)
REPLACEMENT PLASTICS Kawasaki Factory OEM plastics used by our Factory Motocross, Supercross and Team Green™ riders Number Plate, Green__________________58029-0014-290 Fender-Front, Green_________________ 35038-0008-290 Fender-Rear, Green___________________35023-0445-290 Side Panel, Left, Green________________36001-0660-290 Side Panel, Right, Green_______________36001-0662-290 KX™450 (22)
Radiator Shroud, Left, with Decals______ 49135-5283-290 Radiator Shroud, Right, with Decals_____ 49135-5284-290 KX™450 (21)
Radiator Shroud, Left, with Decals______ 49135-5152-290 Radiator Shroud, Right, with Decals_____ 49135-5153-290 KX™450X (22)
Radiator Shroud, Left, with Decals______ 49135-5285-290 Radiator Shroud, Right, with Decals_____ 49135-5286-290
RADIATOR SHROUD, RIGHT
RADIATOR SHROUD, LEFT
KX™450X (21)
Radiator Shroud, Left, with Decals______ 49135-5190-290 Radiator Shroud, Right, with Decals_____ 49135-5191-290 KX™450 (19-20)
Number Plate, Green__________________58029-0013-290 Fender-Rear, Green___________________35023-0445-290 Side Panel, Left, Green________________36001-0660-266 Side Panel, Right, Green_______________36001-0662-266 Side Panel, Left, Green________________36001-0660-290 Side Panel, Right, Green_______________36001-0662-290 KX™450 (20)
Radiator Shroud, Left, with Decals______ 49135-5132-290 Radiator Shroud, Right, with Decals_____ 49135-5133-290 KX™450 (19)
Radiator Shroud, Left, with Decals______ 49132-5460-290 Radiator Shroud, Right, with Decals_____ 49132-5461-290 KX™450 (19+)
Radiator Shroud, Left, without Decals__ 49089-0946-290 Radiator Shroud, Right, without Decals__49089-0947-290 KX™450F (18)
NUMBER PLATE (GREEN)
NUMBER PLATE (WHITE)
Number Plate, White__________________58029-0013-266 Fender-Front, Green_________________ 35038-0008-290 Fender-Rear, Green___________________ 35023-0415-290 Side Panel, Left, White________________36001-0629-266 Side Panel, Right, White_______________ 36001-0631-266 Radiator Shroud, Left, with Decals______49132-5394-25M Radiator Shroud, Right, with Decals_____49132-5395-25M Radiator Shroud, Left, without Decals_____________________ 49089-0879-25M Radiator Shroud, Right, without Decals_____________________ 49089-0880-25M
06
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 06
KX™450 (21+) / KX™450X (21+)
SIDE PANEL (GREEN)
FRONT / REAR FENDER (GREEN)
RADIATOR SHROUD, RIGHT
RADIATOR SHROUD, LEFT
NUMBER PLATE (GREEN)
POLYCARBONATE SKID PLATE KIT
REPLACEMENT PLASTICS Kawasaki Factory OEM plastics used by our Factory Motocross, Supercross and Team Green™ riders KX™250 (21+) / KX™250X (21+)
07 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
Number Plate, Green__________________58029-0014-290 Fender-Front, Green_________________ 35038-0008-290 Fender-Rear, Green___________________35023-0445-290 Side Panel, Left, Green________________36001-0660-290 Side Panel, Right, Green_______________36001-0662-290 KX™250 (22)
Radiator Shroud, Right, with Decals_____ 49135-5268-290 Radiator Shroud, Left, with Decals______ 49135-5269-290 KX™250 (21)
Radiator Shroud, Right, with Decals______49135-5151-290 Radiator Shroud, Left, with Decals______ 49135-5150-290 KX™250X (21)
Radiator Shroud, Left, with Decals______ 49135-5270-290 Radiator Shroud, Right, with Decals_____ 49135-5271-290 Radiator Shroud, Left, with Decals______ 49135-5188-290 Radiator Shroud, Right, with Decals_____ 49135-5189-290 KX™250 (21+) / KX™250X (21+)
Radiator Shroud, Left, without Decals______________________ 49089-0946-290 Radiator Shroud, Right, without Decals_______________________49089-0947-290 KX™250 (20)
Number Plate, Green__________________58029-0013-290 Fender-Front, Green_________________ 35038-0008-290 Fender-Rear, Green___________________ 35023-0415-290 Side Panel, Left, Green________________36001-0629-290 Side Panel, Right, Green_______________ 36001-0631-290 Radiator Shroud, Left, with Decals______49135-5052-25M Radiator Shroud, Right, with Decals_____49135-5053-25M Radiator Shroud, Left, without Decals______________________ 49089-0936-25M Radiator Shroud, Right, without Decals______________________ 49089-0986-25M KX™250 (18-19)
Number Plate, White__________________58029-0013-266 Fender-Front, Green_________________ 35038-0008-290 Fender-Rear, Green___________________ 35023-0415-290 Side Panel, Left, White________________36001-0629-266 Side Panel, Right, White_______________36001-0638-266 Radiator Shroud, Left, with Decals______49132-5444-25M Radiator Shroud, Right, with Decals_____49132-5445-25M Radiator Shroud, Left, without Decals______________________ 49089-0936-25M Radiator Shroud, Right, without Decals______________________ 49089-0937-25M
07 WWW.KAWASAKI.COM
POLYCARBONATE SKID PLATE KIT
POLYCARBONATE SKID PLATE KIT Kit contains skid plate and 4 Flanged Bolts for fitting onto the KX™ 450 or KX™ 250 motorcycle Polycarbonate Skid Plate Kit_______________ 99994-1532
POLYCARBONATE SKID PLATE 4 Flanged Bolts,6X9 (92154-0546) required for fitting onto the KX™ 450 motorcycle KX™450 (19-20)
Polycarbonate Skid Plate__________________55020-1893
08
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 08
KX™450 (21+) / KX™250 (21+)
09 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
* PROFESSIONAL RIDER ON A CLOSED COURSE
09 WWW.KAWASAKI.COM
REAR CARRIER
KLX®300 (21+)
Rear Carrier_____________________________99994-1483
HAND GUARD SET Hand Guard Shell Set is constructed of rugged plastic • All hardware and instructions included KLX®300R (20+)
Hand Guard Set, Black ________________99994-1272-6C KLX®300, KLX®300 SM (21+)
Hand Guard Set, Black ________________99994-1482-6C
HAND GUARD SET
HANDLE BAR PAD
HANDLE BAR PAD Thick foam cover for stock handlebar cross bar • Features the KLX® logo KLX®300 (20+)
Handle Bar Pad__________________________ 99994-1274
TAPERED HANDLE BAR Rugged tapered steel design has robust 1 1/8" (28.5 mm) clamping diameter with matching aluminum riser bar clamps • Replaces stock handlebar and clamps KLX®300R (20+)
Tapered Handle Bar, Silver ____________ 99994-1471-458
TAPERED HANDLE BAR
10
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 10
REAR CARRIER Durable tubular steel black finish construction mounts securely to the rear chassis • Provides 6.5 pound (3.0 Kg) cargo capacity • Rack dimensions approximately 8" x 10" • Includes integrated tool bag • Does not fit KLX™ 300 off road version
HAND GUARD SET
HANDLE BAR PAD
HAND GUARD SET Hand Guard Shell Set is constructed of rugged plastic • All hardware and instructions included KLX®230/KLX®230R (20+)
Hand Guard Set, Black_________________99994-1248-6C 11 \ APPAREL \ MULE™ \ TERYX® \ ATV \ SPORT + DUAL SPORT \ OFFROAD PERFORMANCE \ CRUISER \ WATERCRAFT \ WINCHES \ ESSENTIALS
HANDLE BAR PAD Thick foam cover for stock handlebar cross bar • Features the KLX® logo KLX®230/KLX®230R (20+)
Handle Bar Pad__________________________ 99994-1274
TAPERED HANDLE BAR Rugged tapered steel design has robust 1 1/8" (28.5 mm) clamping diameter with matching aluminum riser bar clamps • Replaces stock handlebar and clamps
TAPERED HANDLE BAR
KLX®230/KLX®230R (20+)
Tapered Handle Bar, Silver_____________99994-1250-458
HELMET LOCK Lock your helmet conveniently when you’re off the road • Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key • Steel construction • All required brackets and hardware included • Dealer installation required • Does not fit KLX® 230 off road version KLX™230 (20+)
Helmet Lock_____________________________ 99994-1279
RIM SET Black finish front and rear wheel rims replace stock silver finish rims • Dealer installation recommended KLX®230/KLX®230R (20+)
Rim Set, Black________________________99994-1251-WC
HELMET LOCK
11 WWW.KAWASAKI.COM
RIM SET
REAR CARRIER
KLX™230 (20+)
Rear Carrier_____________________________99994-1280
SKID PLATE Durable black ABS plastic construction • Provides full coverage protection of the chassis bottom rails • Includes oil drain hole to allow oil to be changed without removing skid plate KLX®230/KLX®230R (20+)
Skid Plate_______________________________99994-1246
SKID PLATE
FRAME COVER Durable black ABS plastic construction • Helps provide scuff protection for the chassis side rails • All hardware and instructions included KLX®230/KLX®230R (20+)
Frame Cover_____________________________99994-1466
FRAME COVER
12
ESSENTIALS / WINCHES / WATERCRAFT / CRUISER / OFFROAD PERFORMANCE / SPORT + DUAL SPORT / ATV / TERYX® / MULE™ / APPAREL / 12
REAR CARRIER Durable tubular steel black finish construction with bright aluminum center plate mounts to the rear chassis • Provides 6.5 pound (3.0 Kg) cargo capacity • Rack dimensions approximately 10" x 10" • Includes four welded bungee hooks • Does not fit KLX® 230 off road version