2024 Kawasaki Genuine Accessories - Cruiser

CRUISER

VULCAN® 1700 VOYAGER® MOTORCYCLE

SMOKED WIND DEFLECTOR

Smoked Wind Deflector adds style for street cruising

• 165mm (6½”) tall • 292mm (11½”) shorter than stock clear windshield • Installs with original chrome cover, gasket, and hardware

Vulcan® 1700 Voyager ® (09+)

Smoked Wind Deflector

12" WINDSHIELD

K99994-0176

Clear 305mm (12”) windshield replacement is 152mm (6”) shorter than stock Voyager motorcycle

windshield • Quantum® hard coated to resist scratching • Installs with original chrome cover, gasket, and hardware

Vulcan® 1700 Voyager ® (09+)

12" Windshield

14" WINDSHIELD

K99994-0175

Clear 356mm (14”) windshield replacement is 100mm (4”) shorter than stock Voyager ® motorcycle windshield

• Quantum® hard coated to resist scratching • Installs with original chrome cover, gasket, and hardware

Vulcan® 1700 Voyager ® (09+)

14" Windshield

16" WINDSHIELD

SMOKED WIND DEFLECTOR

14" WINDSHIELD

K99994-0174

Clear 406mm (16”) windshield replacement is 50mm (2”) shorter than stock Voyager ® motorcycle

windshield • Quantum® hard coated to resist scratching • Installs with original chrome cover, gasket, and hardware

Vulcan® 1700 Voyager ® (09+)

16" Windshield

TRUNK LINER

K99994-0173

Zippered closure and web strap handles • Durable 600 Denier polyester with water-resistant coating

• Handy inner zippered pocket for small items and external webbing pouches for water bottles

• Screened Vulcan® logo

Vulcan® 1700 Voyager ® (09+)

Trunk Liner

SADDLEBAG LINER SET

K99994-974

Durable 600 Denier polyester with water-resistant coating • Handy zippered pocket for smaller items

• Shoulder straps for carrying when removed from saddlebag set • Screened Vulcan® logo

Vulcan® 1700 Voyager ® (09+)

Saddlebag Liner Set K99994-973A

12" WINDSHIELD

16" WINDSHIELD

TRUNK LINER

SADDLEBAG LINER SET

VULCAN® 1700 VOYAGER® MOTORCYCLE

SADDLEBAG SIDE TRIM SET

SADDLEBAG TOP TRIM SET

PILLOW TOP TRUNK BACKREST PAD

Plush pillow top upholstery matches optional Pillow Top Gel Seats (K53001-217 and/or K53001-218) accessory seats • Brackets and hardware from original backrest required for installation

Vulcan® 1700 Voyager ® (09+)

Pillow Top Trunk Backrest Pad, Standard K53001-219

PILLOW TOP GEL SEAT

Made for the long haul rider, the gel insert evens out seating pressure and requires no break-in • Synthetic leather cover is weatherproof and requires low maintenance, needing only an occasional wiping with a damp cloth • Stock seat brackets and bumpers required for installation

Vulcan® 1700 Voyager ® (09+)

Pillow Top Gel Seat, Front K53001-217

Rear ..................................................................................K53001-218

SADDLEBAG SIDE TRIM SET

Chrome plated steel tubing trim adds extra cruiser style to the saddlebags • Installs to existing saddlebag mounts • Distinctive 2-rail design

Vulcan® 1700 Voyager ® (09+)

Saddlebag Side Trim Set K53020-184

SADDLEBAG TOP TRIM SET

Chrome plated steel tubing trim adds extra cruiser style to the saddlebags • Installs to saddlebag lids to help with scuff protection • Distinctive design matches side trim • Not to be used for carrying cargo

Vulcan® 1700 Voyager ® (09+)

Saddlebag Top Trim Set K53020-185

PILLOW TOP TRUNK BACKREST PAD

PILLOW TOP GEL SEAT

VULCAN® 1700 VOYAGER® MOTORCYCLE

GPS MOUNT

Bright chrome billet construction replaces stock handlebar clamps • Provides central mounting of Garmin® Zumo® models only • GPS and cradle not included • Anti-glare tilt design • Adaptor (K53020404) required for Garmin® Zumo® 600 GPS

Vulcan® 1700 Voyager ® (09+)

GPS Mount

BILLET HANDLEBAR CLAMP

K53020-389

Billet machined construction replaces stock handlebar clamp • Available in chrome and chrome flame designs

Vulcan® 1700 Voyager ® (09+)

Billet Handlebar Clamp,

Chrome K53020-390

Chrome Flame K53020-398

ENGINE COVER TRIM

Billet trim replaces stock black plastic cover

• Installs with supplied hardware • Distinctive ballmilled design

Vulcan® 1700 Voyager ® (09+)

Engine Cover Trim

AIR PUMP

K53020-382

Mini pump with 203mm (8”) flex connector and a 0-60 psi gauge for servicing air forks and air shocks

• Pressure can be lowered without removing pump

• One-way check valve prevents pressure loss when pump is removed • For vehicles with air adjustable suspension

Vulcan® 1700 Voyager ® (09+)

Air Pump

K56019-060A

VOYAGER® 1700 PREMIUM COVER

Cover designed to exclusively to fit the Vulcan® 1700 Voyager ® motorcycle • Crafted from water-resistant polyester with soft lining and heat-resistant panels

• Zippered rear panel provides easier on-off even with accessory CB antenna installed • Custom Vulcan® logos • Suitable for indoor or outdoor use

Vulcan® 1700 Voyager ® (09+)

Voyager® 1700 Premium Cover ...................................

K99995-873

TOURING DUST COVER

Lightweight dust cover for indoor use • 10 oz. napped cotton duck fabric with full zipper at back for easier installation and removal • Antenna grommets for both standard radio and optional CB

• Custom Vulcan® logo

Vulcan® 1700 Voyager ® (09+)

Touring Dust Cover ........................................................ K99995-875

HELMET SPEAKER KIT

PASSENGER COMMUNICATION KIT

RIDER HEADSET ADAPTOR KIT RIDER COMMUNICATION CABLE

PASSENGER HEADSET ADAPTOR

CB/SIRIUSXM® RADIO SPLITTER

HELMET SPEAKER KIT

Stereo helmet speakers with quick release cable clamp for rider or passenger use • Requires either Rider Communication Cable (K10400-027) or Rider Entertainment Cable (K10400-034), sold separately

Vulcan® 1700 Voyager ® (09-21)

Helmet Speaker Kit K10400-032

PASSENGER COMMUNICATION KIT

Passenger helmet speakers and boom microphone with in-line PTT Controller • Fits most open and fullface helmets

Vulcan® 1700 Voyager ® (09+)

Passenger Communication Kit K10400-028

RIDER HEADSET ADAPTOR KIT

Required to connect rider and passenger headsets to the motorcycle • Duplex bracket and rider headset adaptor cable included • All mounting hardware and instructions included • Requires Helmet Speaker Kit (K10400-032) and Rider Entertainment Cable (K10400034) or Rider Communication Cable (K10400-027), sold separately

Vulcan® 1700 Voyager ® (09+)

Rider Headset Adaptor Kit K10400-036

RIDER COMMUNICATION CABLE

Coiled cable with communication boom microphone upgrades the rider headset for intercom and CB radio use • Requires Helmet Speaker Kit (K10400-032) and Headset Adaptor Kit (K10400-036), sold separately

Vulcan® 1700 Voyager ® (09+)

Rider Communication Cable K10400-027

PASSENGER HEADSET ADAPTOR CABLE

Enables passenger headset connection to the motorcycle • Requires Passenger Communication Kit (K10400-028), sold separately

Vulcan® 1700 Voyager ® (09+)

Passenger Headset Adaptor Cable ............................ K10400-035

CB/SIRIUSXM® RADIO SPLITTER CABLE

Required to connect both CB and SiriusXM® Kits to the Vulcan 1700 Voyager motorcycle radio

Vulcan® 1700 Voyager ® (09+)

CB/SiriusXM® Radio Splitter Cable K10400-042

VULCAN® 1700 VOYAGER® MOTORCYCLE

AUDIO ADAPTOR CABLE

Connects any small portable audio device using an 1/8” headphone jack to the Vulcan® 1700 Voyager ® motorcycle radio • Volume controlled by motorcycle handlebar switches • Protective foam cushion included to store device in left fairing pocket • Easy plug and play installation • Note: device battery is not charged with this adaptor • Not compatible with iPod® Connection Kit (K10400-040)

Vulcan® 1700 Voyager ® (09+)

Audio Adaptor Cable K10400-041A

CB ANTENNA KIT

Provides fitment of CB antenna onto Vulcan® 1700 Voyager ® motorcycle • Requires CB Radio Kit (K10400043) and Kawasaki accessory helmet headsets, sold separately

Vulcan® 1700 Voyager ® (09+)

CB Antenna Kit...............................................................K10400-048

SIRIUSXM® RADIO KIT

Adds SiriusXM® satellite radio capacity to the Vulcan® 1700 Voyager ® motorcycle • Plug and play mounting is hidden inside fairing with dash mounted antenna for optimized signal reception • Original handlebar radio controls provide easier tuning and programming

• Requires SiriusXM® subscription • SiriusXM® radio programming is available only in the contiguous United States • Contact www.siriusxm.com to check for service in your area before purchasing Kawasaki

SiriusXM® radio accessories

Vulcan® 1700 Voyager ® (09+)

SiriusXM® Radio Kit K10400-047

AUDIO ADAPTOR KIT

SIRIUSXM® RADIO KIT

CB ANTENNA KIT

SMOKED WIND DEFLECTOR

Smoked Wind Deflector adds style for street cruising • 165mm (6½”) tall • 40mm (1½”) taller than stock wind deflector • Hardware not included

Vulcan® 1700 Vaquero® (11+)

Smoked Wind Deflector ............................................. K99994-0176

12” WINDSHIELD

A 305mm (12”) tall clear windshield features Quantum® anti-scratch coating • 178mm (7”) taller than stock wind deflector • Includes all required hardware for installation

Vulcan® 1700 Vaquero® (11+)

12” Windshield K99994-0175A

14” WINDSHIELD

A 356mm (14”) tall clear windshield featuring Quantum® anti-scratch coating • 229mm (9”) taller than stock wind deflector • Hardware not included

Vulcan® 1700 Vaquero® (11+)

14” Windshield ............................................................. K99994-0174

16” WINDSHIELD

A 406mm (16”) tall clear windshield featuring Quantum® anti-scratch coating • 280mm (11”) taller than stock wind deflector • Hardware not included

Vulcan® 1700 Vaquero® (11+)

16” Windshield K99994-0173

18” WINDSHIELD

A 457mm (18”) tall clear windshield featuring Quantum anti-scratch coating • 330mm (13”) taller than stock wind deflector • Hardware not included

Vulcan® 1700 Vaquero® (11+)

18”

REQUIRED WINDSHIELD MOUNTING

The

Vulcan

Damper,

DC POWER OUTLET

SMOKED WIND DEFLECTOR

14" WINDSHIELD

18" WINDSHIELD

12" WINDSHIELD

16" WINDSHIELD

DC POWER OUTLET

SOLO SEAT

Stylish solo shape for rider only (no passenger accommodations) • Styled and shaped to complement the KQR Solo Luggage Rack (K53020-409), sold separately • Stock seat brackets and bumpers required for installation

Vulcan® 1700 Vaquero® (11+)

Solo Seat K53001-240

SOLO HEATED SEAT

Stylish solo shape for rider only (no passenger accommodations) • Styled and shaped to complement the KQR Solo Luggage Rack (K53020-409), sold separately • Electronically controlled heating circuit with lighted control and auto shut-off after one hour • Stock seat brackets and bumpers required for installation

Vulcan® 1700 Vaquero® (11+)

Solo Heated Seat ............................................................ K53001-241

GEL TOURING SEAT

Firmer foam and gel inserts for rider and passenger evens out seating pressure, providing enhanced long distance comfort • Passenger seating area is 30% wider and thicker than stock seat • Python printed vinyl trim • Stock seat brackets and bumpers required for installation

Vulcan® 1700 Vaquero® (11+)

Gel Touring Seat K53001-239A

PASSENGER FLOORBOARD SET

Brushed aluminum finish with rubber foot cushions for maximum passenger comfort • Styling matches the original driver floorboard • Comes standard with black covers • Chrome Covers Plate (14091-0229) also available, sold individually

Vulcan® 1700 Vaquero® (11+)

Passenger Floorboard Set, Black ............................... 99994-0406

Black Cover Plate (2 req) 14091-1808

Chrome Cover Plate (2 req) 14091-0229

AUXILIARY DRIVING LIGHT SET

Chrome plated dual driving lights replace stock fairing louvers • Comes complete with all mounting hardware and fairing-mounted switch

Vulcan® 1700 Vaquero® (11+)

Auxiliary Driving Light Set ........................................... 99994-1097

SOLO SEAT

SOLO HEATED SEAT

AUXILIARY DRIVING LIGHT SET

PASSENGER FLOORBOARD SET

GEL TOURING SEAT

VULCAN® 1700 VAQUERO® MOTORCYCLE

SADDLEBAG SIDE TRIM SET

Chrome plated steel tubing trim adds extra cruiser style to the saddlebags • Installs to existing saddlebag mounts • Distinctive single rail design

Vulcan® 1700 Vaquero® (11+)

Saddlebag Side Trim Set .............................................. 99994-0241

SADDLEBAG TOP TRIM SET

Chrome plated steel tubing trim adds extra cruiser style to the saddlebags • Installs to saddlebag lids to help with scuff protection • Not to be used for carrying cargo

Vulcan® 1700 Vaquero® (11+)

Saddlebag Top Trim Set K53020-173B

SADDLEBAG LINER SET

Durable 600 Denier polyester with water-resistant coating • Handy zippered pocket for smaller items • Shoulder straps for carrying when removed from saddlebag set • Screened Vulcan® logo

Vulcan® 1700 Vaquero® (11+)

Saddlebag Liner Set K99994-973A

BILLET HANDLEBAR CLAMP

Billet machined construction replaces stock handlebar clamp • Available in Black, Chrome and Black Flame designs

Vulcan® 1700 Vaquero® (11+)

Billet Handlebar Clamp, Black K53020-390B

Billet Handlebar Clamp, Chrome K53020-390

ENGINE COVER TRIM

Billet trim replaces stock black plastic cover • Installs with supplied hardware • Distinctive ballmilled design • Chrome or black powder coated

Vulcan® 1700 Vaquero® (11+)

Engine Cover Trim, Black K53020-382B

Engine Cover Trim, Chrome K53020-382

SADDLEBAG SIDE TRIM SET

SADDLEBAG TOP TRIM SET

SADDLEBAG LINER SET

BILLET HANDLEBAR CLAMP

ENGINE COVER TRIM

VULCAN® 1700 VAQUERO® MOTORCYCLE

KQR™ MOUNTING BRACKET SET

KQR™ LUGGAGE RACK

KQR™ PASSENGER BACKREST

KQR™ MOUNTING BRACKET SET

Required to mount the KQR™ Passenger Backrest (K53020-400) or KQR™ Solo Luggage Rack (K53020409), sold separately • Heavy duty chrome steel construction

Vulcan® 1700 Vaquero® (11+)

KQR™ Mounting Bracket Set K53020-405

KQR™ PASSENGER BACKREST

Quick detachable passenger backrest installs and removes quickly • Requires KQR Mounting Kit (K53020-405), sold separately • Keyed lock enhances theft security • Optional KQR Luggage Rack (K53020408), also available, and sold separately

Vulcan® 1700 Vaquero® (11+)

KQR™ Passenger Backrest K53020-400

KQR™ LUGGAGE RACK

Luggage Rack fits KQR Passenger Backrest (K53020400), sold separately • Chrome steel square bar construction • Cargo weight limit 2.2 kg (5 lbs.)

• Requires KQR™ Passenger Backrest (K53020-400) and KQR Mounting Bracket Set (K53020-405), sold separately

Vulcan® 1700 Vaquero® (11+)

KQR™ Luggage Rack K53020-408

GPS MOUNT

Chrome or black billet construction replaces stock handlebar clamp • Provides central mounting of Garmin® Zumo® models only • GPS and cradle not included • Anti-glare tilt design • GPS Adaptor (K53020-404) required for Garmin® Zumo® 600 GPS

Vulcan® 1700 Vaquero® (11+)

GPS Mount, Black K53020-389B

GPS Mount, Chrome K53020-389

AIR PUMP

Mini pump with 203mm (8”) flex connector and a 0-60 psi gauge for servicing air forks and air shocks

• Pressure can be lowered without removing pump

• One-way check valve prevents pressure loss when pump is removed • For vehicles with air adjustable suspension

Vulcan® 1700 Vaquero® (11+)

Air Pump K56019-060A

GPS MOUNT

AIR PUMP

VULCAN® 1700 VAQUERO® MOTORCYCLE

TOURING DUST COVER

Lightweight dust cover for indoor use • 10 oz. napped cotton duck fabric with full zipper at back for easier installation and removal • Antenna grommets for both standard radio and optional CB

• Custom Vulcan® logo

Vulcan® 1700 Vaquero® (11+)

Touring Dust Cover K99995-875

VAQUERO® 1700 PREMIUM COVER

Designed to fit your Vulcan motorcycle for excellent outdoor weather protection • Breathable 300 denier solution-dyed polyester fabric features soft interior surfaces • Fits over all Kawasaki Genuine Accessory backrests and windshields compatible with the Vulcan® Vaquero® motocycle • Metallic screened Vulcan® logos • Tailored antenna holes

Vulcan® 1700 Vaquero® (11+)

Vaquero® 1700 Premium Cover .................................. K99995-876

CB ANTENNA KIT

Provides fitment of CB antenna on to Vulcan® 1700 Vaquero® motorcycle · Requires CB Radio Kit (K10400043) and Kawasaki accessory helmet headsets, sold separately

Vulcan® 1700 Vaquero® (11+)

CB Antenna Kit K10400-044

HELMET SPEAKER KIT

Stereo helmet speakers with quick release cable clamp for rider or passenger use • Requires either Rider Communication Cable (K10400-027) or Rider Entertainment Cable (K10400-034), sold separately

Vulcan® 1700 Vaquero® (11+)

Helmet Speaker Kit K10400-032

RIDER COMMUNICATION CABLE

Coiled cable with communication boom microphone upgrades the rider headset for intercom and CB radio use • Requires Helmet Speaker Kit (K10400-032) and Headset Adaptor Kit (K10400-045), sold separately

Vulcan® 1700 Vaquero® (11+)

Rider Communication Cable K10400-027

PASSENGER COMMUNICATION KIT

Passenger helmet speakers and boom microphone with in-line PTT Controller • Fits most open and fullface helmets

Vulcan® 1700 Vaquero® (11+)

Passenger Communication Kit K10400-028

CB ANTENNA KIT

HELMET SPEAKER KIT

VULCAN® 1700 VAQUERO® MOTORCYCLE

AUDIO ADAPTOR CABLE

SIRIUSXM® RADIO KIT

PASSENGER HEADSET ADAPTOR CABLE

AUDIO ADAPTOR CABLE

Connects any small portable audio device using an 1/8” headphone jack to the Vulcan® 1700 Vaquero® motorcycle radio • Volume controlled by motorcycle handlebar switches • Protective foam cushion included to store device in left fairing pocket • Plug and play installation • Note: device battery is not charged with this adaptor • Not compatible with iPod® Connection Kit (K10400-040)

Vulcan® 1700 Vaquero® (11+)

Audio Adaptor Cable K10400-041A

PASSENGER HEADSET ADAPTOR CABLE

Enables passenger headset connection to the motorcycle • Requires Passenger Communication Kit (K10400-028), sold separately

Vulcan® 1700 Vaquero® (11+)

Passenger Headset Adaptor Cable K10400-035

SIRIUSXM® RADIO KIT

Adds SiriusXM® satellite radio capacity to the Vulcan® 1700 Vaquero® motorcycle • Plug and play mounting is hidden inside fairing with dash mounted antenna for optimized signal reception

• Original handlebar radio controls provide easier tuning and programming • Requires SiriusXM® subscription • SiriusXM® radio programming is available only in the contiguous United States

• Contact www.siriusxm.com to check for service in your area before purchasing Kawasaki SiriusXM® radio accessories

Vulcan® 1700 Vaquero® (11+)

SiriusXM® Radio Kit K10400-047

SHORT WINDSHIELD KIT

WINDSHIELD KIT

VULCAN® 900 CLASSIC LT / CLASSIC MOTORCYCLE

LUGGAGE RACK

SHORT WINDSHIELD KIT

The Short Windshield Kit is 76mm (3”) shorter than the standard Vulcan® 900 Classic LT motorcycle windshield • It is 584mm (23”) high in low position with an additional 51mm (2”) height adjustment

• Built with strong chrome-plated steel supports

• All installation hardware included • Emblem (560520581), sold separately

Vulcan® 900 Classic and Classic LT (06+)

Short Windshield Kit K99994-0059A

Short Windshield Replacement Plastic K99994-0059R

Emblem 56052-0851

WINDSHIELD KIT

Thick, optically correct acrylic plastic windscreen is shaped for smooth airflow and cruiser style

• 660mm (26”) overall height in low position with 51mm (2”) additional height adjustment • Strong chrome-plated steel supports and all installation hardware included • Emblem (56052-0581), sold separately

Vulcan® 900 Classic (06+)

Windshield Kit .......................................................... K99994-0058A

Emblem 56052-0851

PASSENGER BACKREST

Strong chrome steel backrest supports with 330mm (13”) high riser and all required installation hardware

• Order Plain Pad (39156-0187-MA) or Studded Pad (39156-0118-MA) and Vulcan® Emblem (56052-0852) separate

Vulcan® 900 Classic (06+)

Passenger Backrest, Backrest Frame .................. K99994-0066A

Plain Pad 39156-0187-MA

Studded Pad 39156-0118-MA

Emblem 56052-0852

LUGGAGE RACK

Chrome rectangular steel bar construction

• Measures: 191mm (7½”) L x 178mm (7”) W

• Cargo capacity 2.2 kg (5 lbs.) • Passenger Backrest (K99994-066A) required for 900 Classic models, sold separately

Vulcan® 900 Classic and Classic LT (06+)

Luggage Rack K53020-375

GEL SEAT

Gel insert evens out seating pressure, “floating” the rider’s and passenger’s weight over a larger surface area • Gel insert requires no break-in • Synthetic leather cover is weatherproof and requires no maintenance • Available in Plain, Studded and Flame stitch • Passenger seat is 76mm (3”) wider than stock • Original seat bracket and hardware required for installation

Vulcan® 900 Classic and Classic LT (06+)

Gel Seat, Plain* K53001-190

PASSENGER BACKREST

GEL SEAT

VULCAN® 900 CLASSIC LT / CLASSIC MOTORCYCLE

ENGINE GUARD

Made from oversized 34mm (1 1/3") steel tubing, these triple chrome-plated Engine Guards are made to go the distance • Note: This guard may provide limited leg and cosmetic vehicle protection under unique circumstances, e.g. tip over while the motorcycle is stopped • It is not manufactured, nor intended to provide protection from bodily injury in a collision with an automobile or any other object

Vulcan® 900 Classic and Classic LT (06+)

Engine Guard K32000-044

AXLE COVER SET

Sleek, lightweight covers provide a smooth custom look to the front axle • Mounts onto stock axle spacers with provided 3M® adhesive • Instructions included Vulcan® 900 Classic and Classic LT (06+)

Axle Cover Set K53020-183

PLAIN SADDLEBAG SET

Top grain cowhide leather lid with quick-release chrome metal buckles provide essential cruiser style • Metal reinforced frame holds shape even when empty • Pre-drilled ABS backing plate ensures an easier installation • Requires Saddlebag Support Kit (K99994-0069A), sold separately

Vulcan® 900 Classic and Classic LT (06+)

Plain Saddlebag Set ...................................................... K53000-275

BILLET HANDLEBAR CLAMP

Billet machined construction replaces stock handlebar clamps • Available in Chrome and Chrome Flame designs • Not compatible with Windshield Bags (K53000-270 or K53000-271)

Vulcan® 900 Classic and Classic LT (06+)

Billet Handlebar Clamp, Chrome K53020-392

Billet Handlebar Clamp, Chrome Flame .....................K53020-395

TANK PANEL

Made from perfected grain chap leather • Available in Plain or Studded • Easy installation with rawhide ties Vulcan® 900 Classic and Classic LT (06+)

Tank Panel, Plain .......................................................... K53000-260

Tank Panel, Studded K53000-262

WINDSHIELD BAG

Convenient storage bag mounts on the Vulcan® 900 Classic or Classic LT motorcycle windshield or on the Vulcan® 900 Classic motorcycle with accessory windshield • Top grain leather construction with ¼ turn flap closure • Mounts easily for a clean custom look • Note: Lower windshield adjustment may be limited with this bag installed

Vulcan® 900 Classic and Classic LT (06+)

Windshield Bag, Plain* K53000-270 Windshield Bag, Studded..............................................K53000-271

ENGINE GUARD

PLAIN SADDLEBAG SET

AXLE COVER SET

BILLET HANDLEBAR CLAMP

WINDSHIELD BAG

TANK PANEL

CHROME FLAME STUDDED

PLAIN

CHROME

VULCAN® 900 CLASSIC LT / CLASSIC MOTORCYCLE

PASSENGER FLOORBOARD SET

Brushed aluminum finish with rubber foot cushions for maximum passenger comfort • Styling matches the original driver floorboard • Comes standard with chrome covers • Black Covers (14091-1808) also available to replace standard chrome covers

Vulcan® 900 Classic and Classic LT (06+)

Passenger Floorboard Set K46000-426

Chrome Cover Plate (2 req) 14091-0229

Black Cover Plate (2 req).............................................. 14091-1808

GPS MOUNT

Bright chrome billet construction replaces stock handlebar clamps • Provides central mounting of Garmin Zumo models only • GPS and cradle not included • Anti-glare tilt design • Not compatible with Windshield Bags (K53000-270 or K53000-271)

• Adaptor (K53020-404) required for Zumo® 600 GPS

Vulcan® 900 Classic and Classic LT (06+)

GPS Mount K53020-391

SPEEDOMETER VISOR

Easy installation with adhesive bond tape • Enhances the styling of your Vulcan® cruiser motorcycle

Vulcan® 900 Classic and Classic LT (06+)

Speedometer Visor, Chrome K53020-373

RADIATOR COVER

Custom chrome cover trims the stock radiator

• Mounts easily with supplied hardware and instructions

Vulcan® 900 Classic and Classic LT (06+)

Radiator Cover K53020-380

BILLET OIL CAP

Chrome billet oil cap

Vulcan® 900 Classic and Classic LT (06+)

Billet Oil Cap K53020-401

TOURING DUST COVER

Lightweight dust cover for indoor use • 10 oz. napped cotton duck fabric with full zipper at back for easier installation and removal • Antenna grommets for both standard radio and optional CB

• Custom Vulcan® logo

Vulcan® 900 Classic and Classic LT (06+)

Touring Dust Cover K99995-875

PREMIUM VULCAN® COVER

Keep your Vulcan® motorcycle out of the weather with this durable cover made from breathable 600 denier Sur Last ® fabric • Features a softened interior surface to keep the surfaces of your motorcycle clean and scratch-free • Made to fit with or without Windshield and Backrest • Metallic silk-screened logos • Heat shields are sewn to the inside

Vulcan® 900 Classic and Classic LT (06+)

Premium Vulcan® Cover K99995-874A

PASSENGER FLOORBOARD SET

SPEEDOMETER VISOR

BILLET OIL CAP

TOURING DUST COVER

RADIATOR COVER

PREMIUM VULCAN® COVER

VULCAN® 900 CUSTOM MOTORCYCLE

CAFÉ WINDSHIELD

SHORT WINDSHIELD

CAFÉ WINDSHIELD

Mounting brackets attach to the fork tubes • Stylish light-tint polycarbonate shield measures 457mm (18”) W

Vulcan® 900 Custom (07+)

Café Windshield ............................................................. K46001-088

SHORT WINDSHIELD

Mounting brackets attach to the fork tubes • Light-tint polycarbonate shield measures 470mm (18½”) W x 387mm (15¼”) H

Vulcan® 900 Custom (07+)

Short Windshield K46001-086

TOURING WINDSHIELD

Mounting brackets attach to the fork tubes • Clear polycarbonate shield measures 544mm (21”) W x 432mm (17”) H

Vulcan® 900 Custom (07+)

Touring Windshield K46001-087

PASSENGER BACKREST

Designed to match your Vulcan® 900 Custom motorcycle chevron styling • Padded mini-backrest is 203mm (8”) H from seat surface • Mounts easily with supplied hardware • Designed to mount the Luggage Rack (K53020-378B), sold separately

Vulcan® 900 Custom (07+)

Passenger Backrest K53020-377B

LIGHT BAR

Stylish tubular design with compact halogen spotlights complement the Vulcan® 900 Custom looks • Installation with complete instructions and all mounting hardware included • Fits with or without a windshield

Vulcan® 900 Custom (07+)

Light Bar, Chrome K32001-013A

LUGGAGE RACK

Designed to match your Vulcan® 900 Custom motorcycle chevron styling • Rack measures 229mm (9”) W x 203mm (8”) L • Mounts easily with supplied hardware • Cargo weight limit 2.2kg (5 lbs.) • Backrest (K53020-377B) required, sold separately

Vulcan® 900 Custom (07+)

Luggage Rack K53020-378B

PLAIN SADDLEBAG SET

Top grain cowhide leather lid with quick-release chrome metal buckles provide essential cruiser style • Metal reinforced frame holds shape even when empty • Pre-drilled ABS backing plate ensures an easy installation • Requires Saddlebag Support Kit, (K99994-0069A), sold separately

Vulcan® 900 Custom (07+)

Plain Saddlebag Set K53000-275

TOURING WINDSHIELD

LIGHT BAR, BLACK

LIGHT BAR, CHROME

PASSENGER BACKREST

LUGGAGE RACK

PLAIN SADDLEBAG SET

VULCAN® 900 CUSTOM MOTORCYCLE

ENGINE GUARD

Made from oversized 34mm steel tubing, these Engine Guards are made to go the distance • Note: This guard may provide limited leg and cosmetic vehicle protection under unique circumstances, e.g. tip over while the motorcycle is stopped • It is not manufactured, nor intended to provide protection from bodily injury in a collision with an automobile or any other object

Vulcan® 900 Custom (07+)

Engine Guard, Black K32000-045B

Engine Guard, Chrome* K32000-045

PASSENGER FLOORBOARD SET

Brushed aluminum finish with rubber foot cushions for maximum passenger comfort • Styling matches the original driver floorboard • Comes standard with chrome covers • Black Covers (14091-1808) also available to replace standard chrome covers

Vulcan® 900 Custom (07+)

Passenger Floorboard Set K46000-426

Black Cover Plate (2 req) *not shown 14091-1808

Chrome Cover Plate (2 req) ..........................................14091-0229

GEL SEAT / COMFORT SEAT

Gel insert evens out seating pressure, “floating” the rider’s and passenger’s weight over a larger surface area • Gel insert requires no break-in • Synthetic leather cover is weatherproof and requires no maintenance • Comfort Seat, Plain is 13mm (½”) lower and 51mm (2”) narrower on rider’s seat

• Comfort Gel Seat, Plain 19mm (¾”) taller on rider’s and passenger’s seats • Stock seat bracket and hardware required for installation

Vulcan® 900 Custom (07+)

Gel Seat, Plain K53001-193

Comfort Seat, Plain ....................................................... K53001-194

TANK PANEL

Made from perfected grain chap leather • Available in Plain or Studded • Easy installation with rawhide ties Vulcan® 900 Custom (07+)

Tank Panel, Plain K53000-260

Tank Panel, Studded K53000-262

RADIATOR COVER

Custom chrome cover trims the stock radiator • Mounts easily with supplied hardware and instructions

Vulcan® 900 Custom (07+)

Radiator Cover, Chrome K53020-380

ENGINE GUARD, BLACK PASSENGER FLOORBOARD SET

GEL SEAT

COMFORT SEAT

RADIATOR COVER, CHROME

TANK PANEL STUDDED PLAIN

MINI TACHOMETER

AXLE COVER SET

Sleek, lightweight covers provide a smooth custom look to the front axle • Mounts easily onto stock axle spacers with provided 3M® adhesive • Instructions included

Vulcan® 900 Custom (07+)

Axle Cover Set K53020-183

SPEEDOMETER VISOR

Easy installation with adhesive bond tape

• Enhances the styling of your Vulcan cruiser motorcycle

Vulcan® 900 Custom (07+)

Speedometer Visor, Chrome K53020-373

BILLET OIL CAP

Chrome billet oil cap

Vulcan® 900 Custom (07+)

Billet Oil Cap K53020-401

MINI TACHOMETER

Custom tachometer for your Vulcan® 900 Custom motorcycle • Mounts to center of handlebar for that drag bike look and feel • Water-resistant electronic meter with white-hot backlighting

Vulcan® 900 Custom (07+)

Mini Tachometer K53020-379

TOURING DUST COVER

Lightweight dust cover for indoor use • 10 oz. napped cotton duck fabric with full zipper at back for easier installation and removal • Antenna grommets for both standard radio and optional CB

• Custom Vulcan® logo

Vulcan® 900 Custom (07+)

Touring Dust Cover ........................................................ K99995-875

PREMIUM VULCAN® COVER

Keep your Vulcan® motorcycle out of the weather with this durable cover made from breathable 600 denier Sur Last ® fabric • Features a softened interior surface to keep the surfaces of your motorcycle clean and scratch-free • Made to fit with or without Windshield and Backrest • Metallic silk-screened logos • Heat shields are sewn to the inside

Vulcan® 900 Custom (07+)

Premium Vulcan® Cover K99995-874A

AXLE COVER SET

SPEEDOMETER VISOR

BILLET OIL CAP

1. INTERCHANGEABLE SEATS

Three different ERGO-FIT ® seats are available to help riders find the right reach to the ground, while keeping things comfortable.

2. ADJUSTABLE FOOTPEGS

Factory-installed three-position adjustable footpegs move both towards and away from the rider’s body, allowing for just the right amount of legroom.

3. VERSATILE HANDLEBAR

A combination of accessory handlebars and standard adjustable clutch and brake levers allows riders to find a comfortable reach.

2.

3.

1.

CRUISER VULCAN® S MOTORCYCLE

SIZING INFORMATION

The Vulcan® S motorcycle features a combination of adjustable factory components and ERGO-FIT ® accessories. There are 18 different adjustable configurations to achieve a preferred fit for comfort and confidence. Use the chart below as a suggestion for finding the right fit based on your height.

ERGO-FIT ® EXTENDED REACH 6'1" AND UP

6.

ERGO-FIT ® MID REACH 5'7" TO 6'0"

4.

ERGO-FIT ® REDUCED REACH 5'6" AND BELOW

4. REDUCED REACH - UP

TO 5'6"

ERGO-FIT ® reduced reach handlebar decreases reach by 1 inch

• Handlebar levers are adjusted closer to handlebar grips

• ERGO-FIT ® reduced reach seat moves you forward 2 inches

• Footpegs are adjusted 1 inch closer*

*Accessory ERGO-FIT ® shift rods required when changing footpeg position from standard. Suggested configuration for rider’s height.

5. MID REACH - 5'7"

TO 6'0"

ERGO-FIT ® mid reach handlebar is in the factory-installed position • ERGO-FIT ® mid reach seat is tapered for an easier reach to the ground • Footpegs are in factory position

6. EXTENDED REACH - 6'1" AND UP

Handlebar levers are adjusted away from handlebar grips

• ERGO-FIT ® extended reach seat moves hip support back 1 inch • Footpegs are adjusted 1 inch farther*

*Accessory ERGO-FIT ® shift rods required when changing footpeg position from standard. Suggested configuration for rider’s height.

VULCAN® S MOTORCYCLE

ERGO-FIT® REDUCED REACH SEAT

The interchangeable ERGO-FIT ® reduced reach seat moves riders forward 2 inches to suit most riders 5’6” and under • Made to tailor fit and complement the Vulcan® S motorcycle, this seat will help riders find the right reach to the ground while keeping things comfortable • PVC foam with vinyl cover • Not compatible with ERGO-FIT ® extended reach passenger seat (K53001-252B)

Vulcan® S (15+)

ERGO-FIT® Reduced Reach Seat 99994-1559

PASSENGER SEAT

This passenger seat matches the Vulcan® S motorcycle stock seat for a uniform look • Use with ERGO-FIT mid reach seat (53066-0502-MA) or reduced reach seat (99994-0515), sold separately • Polyurethane foam with vinyl cover • Not compatible with ERGOFIT ™ extended reach seat (K53001-251B) • Requires Passenger Footpegs (99994-0570), sold separately Vulcan® S (15+)

ERGO-FIT® REDUCED REACH SEAT PASSENGER SEAT

Passenger Seat 99994-1558

ERGO-FIT® REDUCED REACH HANDLEBAR WITH GRIP

The ERGO-FIT ® reduced reach handlebar with grip decreases reach by 25mm (1”) to suit most riders 5’6” and under • Made to tailor fit and complement the Vulcan® S motorcycle, this accessory handlebar, combined with the standard adjustable clutch and brake levers, allows riders to find a comfortable reach • Steel • Handlebar, cable ties and pre-installed left grip included Vulcan® S (15+)

ERGO-FIT® Reduced Reach Handlebar with Grip ......................................................................... 99994-0827

ERGO-FIT® REDUCED REACH SHIFT ROD

Purchase as a required component to move footpegs to reduced reach position

Vulcan® S (15+)

ERGO-FIT® Reduced Reach Shift Rod 99994-0674

ERGO-FIT® REDUCED REACH HANDLEBAR WITH GRIP

ERGO-FIT® REDUCED REACH SHIFT ROD

ERGO-FIT® REDUCED REACH

ERGO-FIT® MID REACH SEAT PASSENGER SEAT

ERGO-FIT® MID REACH HANDLEBAR

ERGO-FIT® MID REACH SEAT

ERGO-FIT® MID REACH SHIFT ROD

ERGO-FIT® MID REACH

The interchangeable ERGO-FIT ® mid reach seat is tapered for an easy reach to the ground to suit most riders from 5’7” to 6’0” • Made to tailor fit and complement the Vulcan® S motorcycle, this seat will help riders find the right reach to the ground while keeping things comfortable • PVC foam with vinyl cover • Not compatible with ERGO-FIT ® extended reach passenger seat (K53001-252B) • This is a stock component

Vulcan® S (15+)

ERGO-FIT® Mid Reach Seat 53066-0734-MA

PASSENGER SEAT

This passenger seat matches the Vulcan® S motorcycle stock seat for a uniform look • Use with ERGO-FIT ™ mid reach seat (53066-0502-MA) or reduced reach seat (99994-0515), sold separately • Polyurethane foam with vinyl cover • Not compatible with ERGOFIT ™ extended reach seat (K53001-251B) • Requires Passenger Footpegs (99994-0570), sold separately

Vulcan® S (15+)

Passenger Seat 99994-1558

ERGO-FIT® MID REACH HANDLEBAR

The ERGO-FIT ® mid reach handlebar is in the factory installed position to suit most riders from 5’7” to 6’0” • Made to tailor fit and complement the Vulcan S motorcycle, this handlebar combined with the standard adjustable clutch and brake lever allows riders to find a comfortable reach • Steel • This is a stock component

Vulcan® S (15+)

ERGO-FIT®Mid Reach Handlebar 46003-0626-18R

ERGO-FIT® MID REACH SHIFT ROD

This is a stock component

Vulcan® S (15+)

ERGO-FIT® Mid Reach Shift Rod

39111-0332

VULCAN® S MOTORCYCLE

ERGO-FIT® EXTENDED REACH SEAT

The interchangeable ERGO-FIT ® extended reach seat moves hip support back 25mm (1”) to suit most riders 6’1” and taller • Made to tailor fit and complement the Vulcan® S motorcycle, this seat will help riders find the right reach to the ground while keeping things comfortable • Gel insert evens out seating pressure and requires no break-in

• PVC foam with vinyl cover • Not compatible with Passenger Seat (99994-0569)

Vulcan® S (15+)

ERGO-FIT® Extended Reach Seat K53001-251C

ERGO-FIT® EXTENDED REACH PASSENGER SEAT

Give passengers room to stretch out. Seat back is 25mm (1”) thicker and 50mm (2”) wider than the optional Passenger Seat • Firm foam with a gel insert provides long distance support and comfort, while the carbon fiber trim matches the ERGO-FIT ® extended reach seat for a sleek overall look • PVC foam with vinyl cover • Not compatible with ERGO-FIT reduced reach (99994-0515) or mid reach seats (53066-0502MA) ∙ Requires Passenger Footpegs (99994-0570), sold separately

Vulcan® S (15+)

ERGO-FIT® Extended Reach

ERGO-FIT®

REACH SEAT ERGO-FIT®

REACH PASSENGER SEAT

ERGO-FIT® MID REACH HANDLEBAR

ERGO-FIT® EXTENDED REACH SHIFT ROD

Passenger Seat K53001-252C

ERGO-FIT® MID REACH HANDLEBAR

The ERGO-FIT ® mid reach handlebar is in the factory installed position to suit most riders from 6’1” or taller • Made to tailor fit and complement the Vulcan® S motorcycle, this handlebar combined with the standard adjustable clutch and brake lever allows riders to find a comfortable reach • Steel

• This is a stock component

Vulcan® S (15+)

ERGO-FIT® Mid Reach Handlebar 46003-0626-18R

ERGO-FIT® EXTENDED REACH SHIFT ROD

Purchase as a required component to move footpegs to extended reach position

Vulcan® S (15+)

ERGO-FIT® Extended Reach Shift Rod 99994-0659

ERGO-FIT® EXTENDED REACH

Painted aluminum Spool/Bobbin with additional painted aluminum ring to protect the rear swingarm from scratches

Vulcan® S (15-23)

10mm Spool ..................................................................

012BOY-0014 *

10MM SPOOL

10MM SPOOL

VULCAN® S MOTORCYCLE

KQR™ LARGE WINDSHIELD

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum® hard coating helps to protect against scratching • KQR mounting system allows for easier installation or removal once installed • Requires KQR Windshield Bracket Kit (99994-0526B) and KQR Windshield Fork Bracket Kit (99994-0546), sold separately • 435mm (17¼”) H

Vulcan® S (15+)

KQR™ Large Windshield K99994-0632

KQR™ MEDIUM WINDSHIELD

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum® hard coating helps to protect against scratching • KQR mounting system allows for easier installation or removal once installed • Requires KQR™ Windshield Bracket Kit (99994-0526B) and KQR™ Windshield Fork Bracket Kit (99994-0546), sold separately • 360mm (14”) H

Vulcan® S (15+)

KQR™ Medium Windshield K99994-0633

KQR™ WINDSHIELD FORK BRACKET KIT

Purchase as a required component to mount KQR

Large Windshield (K99994-0632), KQR Medium Windshield (K99994-0633), or KQR Café Deflector (99994-0738), sold separately • KQR™ mounting system allows for more efficient installation or removal of windshield or deflector once installed

• Standard on 2016 Vulcan® S Café Edition

motorcycles

Vulcan® S (15+)

KQR™ Windshield Fork Bracket Kit 99994-0546

KQR™ WINDSHIELD BRACKET KIT

Purchase as a required component to mount KQR™ Large Windshield (K99994-0632) or KQR Medium Windshield (K99994-0633), sold separately • KQR mounting system allows for more easier installation or removal of windshield once installed • Powder coated steel

Vulcan® S (15+)

KQR™ Windshield Bracket Kit ................................... 99994-0526B

KQR™ LARGE WINDSHIELD

KQR™ MEDIUM WINDSHIELD

KQR™ WINDSHIELD FORK BRACKET KIT

KQR™ WINDSHIELD BRACKET KIT

FIXED LARGE WINDSHIELD

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum® hard coating helps to protect against scratching • Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Windshield Fork Bracket Kit (99994-0824), sold separately • 435mm (17¼”) H

Vulcan® S (15+)

Fixed Large Windshield ................................................ 99994-0823

FIXED MEDIUM WINDSHIELD

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum® hard coating helps to protect against scratching • Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Windshield Fork Bracket Kit (99994-0824), sold separately • 360mm (14”) H

Vulcan® S (15+)

Fixed Medium Windshield ............................................ 99994-0828

FIXED WINDSHIELD FORK BRACKET KIT

Purchase as a required component to mount Fixed Large Windshield (99994-0823) or Fixed Medium

Windshield (99994-0828), or Fixed Café Deflector (99994-0826), sold separately • Powder coated steel

• Fixed Windshield Fork Bracket Kit, Black is standard on 2017-2018 Vulcan® S Café Edition motorcycles

Vulcan® S (15+)

Fixed Windshield Fork Bracket Kit 99994-0824

FIXED WINDSHIELD BRACKET KIT

Purchase as a required component to mount Fixed Large Windshield (99994-0823) or Fixed Medium

Windshield (99994-0828), sold separately • Powder coated steel

Vulcan® S (15+)

Fixed Windshield Bracket Kit 99994-0825

FIXED LARGE WINDSHIELD

FIXED WINDSHIELD BRACKET KIT

FIXED MEDIUM WINDSHIELD

FIXED WINDSHIELD FORK BRACKET KIT

VULCAN® S MOTORCYCLE

KQR™ CAFÉ DEFLECTOR

Stylish black smoked deflector adds style to your Vulcan® S motorcycle for around town cruising • Café Deflector can be removed quickly without tools and replaced with a KQR Windshield when more wind protection is desired • Quantum™ hard coating helps to protect against scratching • Requires KQR Windshield Fork Bracket Kit (99994-0546), sold separately • KQR Café Deflector is standard on 2016 Vulcan® S Café Edition motorcycles

Vulcan® S (15+)

KQR™ Café Deflector

FIXED CAFÉ DEFLECTOR

99994-0738

Stylish black smoked deflector adds style to your Vulcan® S motorcycle for around town cruising • Quantum hard coating protects against scratching

• Requires Fixed Windshield Fork Bracket Kit (99994-0824) sold separately • Fixed Café Deflector is standard on 2017-2018 Vulcan® S Café Edition motorcycles

Vulcan® S (15+)

Fixed Café Deflector

PASSENGER FOOTPEG SET

99994-0826

Invite a friend along for the ride with added passenger comfort and accommodations • Integrated brackets are constructed from black powder coated steel to match the overall look of the bike • Peg-style footpegs are rubber-coated for durability and grip while providing a minimalist, clean look when riding solo • Powder coated steel • All necessary brackets and hardware included • Required component for Passenger Seat (99994-0569) or ERGO-FIT extended reach passenger Seat (K53001-252C), sold separately

Vulcan® S (15+)

Passenger Footpeg Set

SOLO LUGGAGE RACK

99994-0570

Mount this luggage rack to your rear fender for extra cargo capacity • Developed by Kawasaki to integrate with the clean, modern lines of your Vulcan® S motorcycle • Powder coated steel • All required brackets and hardware included • Not compatible with accessory passenger seats • 356mm (14”) L x 190mm (71/2”) W

Vulcan® S (15+)

Solo Luggage Rack

LED LIGHT BAR

99994-0519B

The chrome finish of the LED Light Bar complements your bike’s style and integrates easily into the front headlight area with simple plug and play installation

• Reflector Facing Technology (RFT) allows for optimum LED output while consuming far less power than conventional LED or halogen bulbs • Steel bracket with plastic light housing • All necessary wiring and hardware to mount light bar included

• Requires Relay Kit (99994-0510), sold separately

Vulcan® S (15+)

LED Light Bar

99994-0511

KQR™ CAFÉ DEFLECTOR

PASSENGER FOOTPEG SET

LED LIGHT BAR

FIXED CAFÉ DEFLECTOR

SOLO LUGGAGE RACK

KQR™ PASSENGER BACKREST

FIXED PASSENGER BACKREST

LUGGAGE RACK FOR FIXED PASSENGER BACKREST

VULCAN® S MOTORCYCLE

KQR™ PASSENGER BACKREST

Padded backrest provides passenger comfort and features the KQR™ mounting system for installation or removal with minimal use of tools and effort • KQR mounting system is key locked for added security

• Powder coated steel construction • Requires KQR™ Bracket Kit (99994-0523B), sold separately • Designed to mount optional Luggage Rack (99994-0520B), sold separately • 203mm (8”) H from seat surface

Vulcan® S (15+)

KQR™ Passenger Backrest 99994-0518B

FIXED PASSENGER BACKREST

Padded backrest provides passenger comfort

• Powder coated steel construction • Designed to mount optional Luggage Rack for Fixed Passenger Backrest (99994-0846), sold separately • 203mm (8”) H from seat surface

Vulcan® S (15+)

Fixed Passenger Backrest 99994-0818

LUGGAGE RACK FOR FIXED PASSENGER BACKREST

Durable powder coated steel construction luggage rack mounts to your Fixed Passenger Backrest (99994-0818) • Designed by Kawasaki to enhance your Vulcan® S motorcycle styling while providing extra space for whatever you take with you on the road

• All required brackets and hardware included

• 203mm (8”) L x 229mm (9”) W

Vulcan® S (15+)

Luggage Rack for Fixed Passenger Backrest 99994-0846

VULCAN® S MOTORCYCLE

PREMIUM SADDLEBAG SET

These saddlebags complement the overall look of your bike • Durable marine grade vinyl with genuine leather trim adds classic cruiser style • An interior pocket keeps important papers and documents separate and protected • A magnetic clasp closure on the lid makes accessing your goods convenient

• KQR or fixed mounting system allows for easier installation of the Premium Saddlebag Set • Requires either KQR™ Bracket Kit, Black (99994-0523B) and KQR Saddlebag Support Set (99994-0521B) or Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately • 508mm (20”) L x 178mm (7”) W x 279mm (11”) H

Vulcan® S (15+)

Premium Saddlebag Set 99994-0522

SOFT SADDLEBAG SET

Stylish and rugged water-resistant nylon construction with reinforced molded foam body and zippered lids to hold shape even when empty • KQR or fixed mounting system allows for easier installation of the Soft Saddlebag Set • 11 liters per side capacity

• Reflective piping • Requires either KQR Bracket Kit, Black (99994-0523B) and KQR Saddlebag Support Set (99994-0521B) or Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately • Includes a set of 2 waterproof liners for packing cargo in wet weather • 483mm (19”) L x 165mm (6½”) W x 279mm (11”) H

Vulcan® S (15+)

Soft Saddlebag Set K57003-121

SADDLEBAG LINER SET

Taped seams and a covered zipper flap make this the perfect waterproof liner for your KQR™ Saddlebags

• Screenprinted Kawasaki logos on both sides of each liner • Fits either Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121), sold separately • 483mm (19”) L x 165mm (61/2”) W x 279mm (11”) H

Vulcan® S (15+)

Saddlebag Liner Set ...................................................... 99994-0745

KQR™ SADDLEBAG SUPPORT SET

Purchase as a required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121), sold separately • Durable powdercoated steel construction with KQR mounting system for easier installation or removal of accessories once installed

Vulcan® S (15+)

KQR™ Saddlebag Support Set ................................... 99994-0521B

FIXED SADDLEBAG SUPPORT SET

Purchase as a required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121), sold separately • Durable powdercoated steel construction with included mounting system

Vulcan® S (15+)

Fixed Saddlebag Support Set ....................................... 99994-0819

PREMIUM SADDLEBAG SET

SOFT SADDLEBAG SET

KQR™ SADDLEBAG SUPPORT SET

SADDLEBAG LINER SET

FIXED SADDLEBAG SUPPORT SET

KQRTM BRACKET KIT

CLUTCH

DC POWER OUTLET

Charge portable devices on the go with a 12-volt DC power outlet that mounts next to your bike’s gauges

• Minimal installation required • All required brackets and hardware included • Requires Relay Kit (999940510), sold separately • 21mm (4/5”) diameter socket

Vulcan® S (15-21)

DC Power Outlet 99994-0541

RELAY KIT

Purchase as a required component to mount Gear

Position Indicator (99994-0540), DC Power Outlet (99994-0541), LED Light Bar (99994-0511), or other electrical accessories • Only one Relay Kit required per Vulcan® S motorcycle

Vulcan® S (15+)

Relay Kit 99994-0510

KQR™ BRACKET KIT

Purchase as a required component to mount KQR™ Passenger Backrest (99994-518B), Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121), sold separately • Durable powdercoated steel construction with KQR mounting system for easier installation or removal of accessories once installed

Vulcan® S (15+)

KQR™ Bracket Kit, Black ........................................... 99994-0523B

CLUTCH COVER PLATE

Stylish chrome cover plate adds style to the engine clutch cover of your Vulcan® S motorcycle • Add the optional Clutch Cover Emblem (99994-0600) for even more Kawasaki style

Vulcan® S (15+)

Clutch Cover Plate 99994-0580

CLUTCH COVER EMBLEM

Adhesive backed trim piece to make your clutch cover and engine look its best with brushed aluminum finish • Kawasaki logo • Aluminum • Clutch Cover Emblem is standard on 2017-2018 Vulcan® S SE & Vulcan® S Café Edition motorcycles

Vulcan® S (15+)

Clutch Cover Emblem 99994-0600

PREMIUM COVER

Durable, breathable 600 denier Sur Last ® fabric with softened interior surface offers added protection for your motorcycle • This cover features heat shields in exhaust areas and metallic silk-screened logos

Vulcan® S (15+)

Premium Cover ........................................................... K99995-869A

ELIMINATOR® MOTORCYCLE

ELIMINATOR® MOTORCYCLE

FRAME SLIDER SET

Helps protect the engine from tip-over damage • Highdensity black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factorydesigned metal brackets • Includes required brackets, hardware and installation instructions • Note: Frame Sliders help to protect the motorcycle but will not prevent all types of damage

Eliminator (24)

Frame Slider Set 99994-1900

USB OUTLET KIT

Charge your USB devices on the go with a USB

Socket Kit • Installs directly under the seat • 12 volt input with 5 volt - 4.2 amp, output port • Dealer

installation recommended

Eliminator (24)

USB Outlet Kit Type-C 99994-1906

GRIP HEATER SET

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip • Adjust to low, medium, or high settings with the touch of a button • Indicator light on the left grip improves setting visibility • Grip set with all required wiring, brackets and hardware • Dealer

installation recommended

Eliminator (24)

Grip Heater Set 99994-1907

TANK PAD

Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear • Die cut design to fit the contour of the fuel tank

Eliminator (24)

Tank Pad 99994-2240

RADIATOR SCREEN

Stylish trim helps protect the radiator from road debris with rugged metal guard • Laser-cut pattern offers increased airflow while adding minimum weight

Eliminator (24)

Radiator Screen 99994-1940

FRAME SLIDER SET

USB OUTLET KIT

TANK PAD

GRIP HEATER SET

RADIATOR SCREEN

ERGO-FIT® REDUCED REACH SEAT

ERGO-FIT® EXTENDED REACH SEAT

ERGO-FIT® REDUCED REACH SEAT

ERGO-FIT ® Reduced Reach Seat reduces the seat height by 20mm (.75") and has a narrowed front • The seat vinyl is the same cold-resistant, high-elasticitytype material used on the standard seats • Made to fit and complement the Eliminator motorcycle • Includes all necessary hardware

Eliminator (24)

ERGO-FIT® Reduced Reach Seat ..........................99994-1904-MA

ERGO-FIT® EXTENDED REACH SEAT

ERGO-FIT ® Extended Reach Seat increases the seat height by 30mm (1.18") and has a narrowed front • Cold-resistant, high-elasticity-type material • Made to fit and complement the Eliminator motorcycle

• Includes all necessary hardware • Utilizes factory seat base

Eliminator (24)

ERGO-FIT® Extended Reach Seat ......................... 99994-1903-MA

REAR CARRIER

PASSENGER GRAB BAR

PREMIUM COVER

Durable tubular steel chrome finish construction mounts securely to the rear chassis • Provides 6.5 pound (3.0 Kg) cargo capacity • Rack dimensions approximately 8" x 10"

Eliminator (24)

Rear Carrier 99994-1902

PASSENGER GRAB BAR

Give your passenger additional comfort with this classic style Passenger Grab Bar • Made from chrome plated steel • Includes all required hardware

Eliminator (24)

Passenger Grab Bar ...................................................... 99994-1909

HELMET LOCK

Conveniently lock your helmet when you’re off the road • Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking • Steel construction • Dealer installation required

Eliminator (24)

Helmet Lock 99994-1908

PREMIUM COVER

Breathable 600 denier Sur Last ® fabric with softened interior surface offers the maximum protection for your motorcycle • This cover features heat shields in exhaust areas and metallic silk-screened logos • Premium Sport Cover fits Ninja® 1000 without Saddlebags • Premium Sport Touring Cover accomodates KQR Saddlebags and/or Top Case

Eliminator (24)

Premium Cover K99995-869A

HELMET LOCK

REAR CARRIER

CRUISER

Kawasaki Motors Corp., U.S.A.

Manufacturer’s suggested retail prices shown. Prices, product and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand.

www.kawasaki.com/accessories

All trademarks, registered trademarks, logos, and copyrights are the property of their respective owners.