Includes: A. expose smart light B. iPhone 5 & 6 series standard connector C. iPhone 5 & 6 series long connector D. 3mm headphone connector E. Mini-stand with gimbal mount* F. General purpose clip G. Lanyard with metal loop H. Micro USB cable
H
B A
D
E
F G
C
* iPhone 6 model only
BEFORE FIRST USE: Please fully recharge expose smart Recharging the battery 1. Connect expose smart to the USB to micro-USB cable 2. Connect it to a computer’s or another electronic device’s USB port When using a wall charger, use an approved USB charger only. A full charge cycle will take approximately 3 hours. Battery low/charge status LED is located at the rear of the light. The LED will turn red when holding a low charge. While the light is charging, the battery low/charge status LED will be red, Micro USB port turning green once fully charged.
Status LED
Wall charger specifications: DC Output: 5VDC (+0.25V/-0.1V) >=0.5A. Use chargers with suitable approvals and certifications only. Charging conditions: Indoors only in temperatures above 10oC (50oF).
Using the mounting accessories There are a number of clips included in this package that allow you to attach expose smart to various objects. Mounting expose smart to: • iPhone: 4s and 5 & 6 series. Refer parts B, C, & D. Long and short clips accommodate the iPhone with and without a case respectively (fig. A) • General purpose clip. Refer part F. Allows attachment of the light to other objects such as garment pockets (fig. B) • Lanyard with metal loop. Refer part G. Attach the light to the lanyard provided and keep it handy with your keys (fig. C) • Gimble mount (fig. D) adjustable mount for remote use of light. • Android (and other Smart phone) 3mm headphone mount.
(fig. A)
(fig. B)
Manual mode Using the light manually 1. Press/hold the button for 2 seconds to turn the light on 2. Press/release the button to switch between modes (there are 3 brightness levels to choose from) 3. Position the light to provide best illumination 4. Take photos and videos when you’re ready 5. To turn the light off, press/hold the button again for 2 seconds
(fig. C)
Button
(fig. D)
Mode
Effect
Runtime (minutes)
1
High
< 20
2
Medium
< 40
3
Low
< 80
* Note: Social sharing options will vary between Android and iPhone and also upon the user’s custom setup it is also subject to change from time to time when the application is updated. Information at time of printing is correct. For updates, please refer to to the website at knog.com.au
English Page 1 / 4