Wrn 2014 08

August 2014 www.wireropenews.com

World’s Longest Bridge

The Akashi Straits Bridge conquers treacherous waters story on page 8

Marine Lifesaving and Salvage Historic rescue efforts involving wire rope story on page 34

Pocket Lift Guide - Plus Units: Imperial

Crosby Catalog Units: Imperial and Metric ®

Sling Calculator Units: Imperial and Metric

Sling Calculator Units: Imperial and Metric User’s Guide for Lifting - Plus Units: Imperial Block Selection and Application Guide - Plus Units: Imperial User’s Guide for Heavy Lifts - Plus Units: Imperial Pocket Lift Guide - Plus Units: Imperial Crosby Catalog Units: Imperial and Metric ®

Each app tool offers special enhancements and features that are easy to use and user friendly. Check out all the new Crosby® apps ready for download at the App Store today.

Scan our QR code with your smart device to visit the Crosby ® application page.

App StoreSM is a registered trademark of Apple Inc. Application availability and pricing are subject to change.

Google Play™ store is a trademark of Google Inc. Application availability and pricing are subject to change.

www.thecrosbygroup.com

SLINGS TO THE MAX

Slingmax® Rigging Solutions is a technology and marketing Slingmax® Rigging Solutions is a technology and marketing company, associated with the best companies in the rigging company, associated with the best companies in the rigging business inside and outside the USA. business inside and outside the USA. The Slingmax® family of products includes the Twin-Path® The Slingmax® family of products includes the Twin-Path® brand in synthetic slings and the CornerMax® brands for brand in synthetic slings and the CornerMax® brands for cut protection for synthetic slings. Our Gator-sling™ brands cut protection for synthetic slings. Our Gator-sling™ brands are well-known multi-part wire rope slings. are well-known multi-part wire rope slings.

Our technology results in a competitively priced product Our technology results in a competitively priced product line that is far ahead of any competition. Our built-in line that is far ahead of any competition. Our built-in sling inspection and safety features are not available sling inspection and safety features are not available anywhere else. And this technology is backed up by the anywhere else. And this technology is backed up by the most extensive testing program in the sling industry. Our most extensive testing program in the sling industry. Our policy of continuous improvement is well documented. policy of continuous improvement is well documented.

Here are some important features of our products.

Here are some important features of our products.

■ ■

■ ■ ■ ■

■ ■

25 25 year year history history of of Twin-Path Twin-Path®® slings slings proven proven in the field in the field 25 25 year year history history of of continuous continuous improvement improvement Inspection Inspection and and safety safety features features available available only only ® on on Twin-Path Twin-Path® slings slings More More testing testing than than any any other other sling sling product product

The The Power Power of... of...

SLINGMAX SLINGMAX ® ®

® ®

P.O. BOX 2423, ASTON, PA 19014-2423 USA P.O. BOX 2423, ASTON, PA 19014-2423 USA TEL: 800-874-3539 • 610-485-8500 • FAX: 610-494-5835 TEL: 800-874-3539 • 610-485-8500 • FAX: 610-494-5835

www.slingmax.com www.slingmax.com

www.yoke.net

Quality approval by:

Superior Design Features of YOKE Snatch Blocks YSB sheaves are closed die drop forged steel.

Available in size from 3” to 12” satisfying your heavy duty applications.

Groove bottom hardened to 35 Rc maximizes durability of Snatch Blocks.

YOKE’S DISTRIBUTORS IN NORTH AMERICA: USA

B/A PRODUCTS CO. TEL : +1 410-381-1700 DOMINION STEEL SPECIALIST INC. TEL : +1 713-678-8141 U.S. RIGGING SUPPLY TEL : +1 714-545-7444

CANADA

HERCULES SLR INC. TEL : +1 902-482-3125 OCEANSIDE EQUIPMENT LTD. TEL : +1 902-468-4844 SATURN INDUSTRIES LTD. TEL : +1 204-633-1529

Wire Rope · Clips · Thimbles · Shackles Turnbuckles · Weldless Links · Hooks Eye Bolts · Eye Nuts · Swivels · Chain

CARBON STEEL • STAINLESS STEEL • ALLOY STEEL

Northern California Pacific Northwest 2051 Cessna Dr #200 4301-B Industry Drive East Vacaville, CA 95688 Fife, WA 98424 Phone: 800-331-0794 Phone: 877-926-3500 Fax: 707-446-2033 Fax: 253-926-2510 www.landmannwire.com

Midwest Distribution Southern California 3551 County Rd F 12941 Sunnyside Place Tekamah, NE 68061 Santa Fe Springs, CA 90670 Phone: 800-331-0794 Phone: 800-344-6751 Fax: 707-446-2033 Fax: 562-946-1600 sales@landmannwire.com

Vol. 35, No. 6 August 23, 2014 Edward Bluvias, III Publisher & Editorial Director Barbara Spencer Contributing Editor/ Suppliers Directory Patricia Bluvias Circulation Director Don Tywoniw Production Manager/Co-Editor 2D Graphics Graphics & Layout web site: www.wireropenews.com

Contents Features Wire Rope Critical Component of World’s Longest Bridge – and Some Predecessors .........8

The Akashi Straits Bridge learns lessons from historic birdges around the world and takes them a step further.

By Peter Hildebrandt.

As Technology Changes, Exploration Equipment Relies on an Expanding Variety of Lines . .............................................16

Searching the seas for lost and forgotten vessels utilizes the lastest innovations to get the job done.

By Henry Vere.

Wire Rope Does its Part in Preserving Costa Rican and Puerto Rican Rainforests . ..24

of Wire Rope News ISSN 0740-1809 Wire Rope News & Sling Technology is published by-monthly by Wire Rope News, LLC, 511 Colonia Blvd., Colonia, New Jersey 07067-2819. (908) 486-3221. Fax No. (732) 396-4215. Address all correspondence concerning advertising, production, editorial, and circulation to Wire Rope News, LLC, P.O. Box 871, Clark, New Jersey 07066-0871.

Subscription rates: $20 per year, domestic; $30 per year, foreign; $25 per year, Canadian. Quantity discounts of three or more subscriptions available at $15 each per year, domestic: $25 each per year, foreign: $18 each per year, Canadian.

Single copies: $4 per issue, domestic; $6 per issue, foreign; $5 per issue, Canadian.

Copyright © 2014 by Wire Rope News, LLC, 511 Colonia Blvd., Colonia, New Jersey 07067. All rights reserved. Publisher reserves the right to reject any material for any reason deemed necessary.

Printed in the USA Published bi-monthly; Oct., Dec., Feb., April, June, Aug. Issued 3rd week of month published. Insertion orders, classified, and editorial copy must be received before the 20th of month preceding date of publication (e.g. May 20th for June issue).

E-mail: info@wireropenews.com

Wire rope isn’t only made for heavy work applications. Lately it’s been a staple of an ever growing entertainment industry: touring the jungles on zip lines.

By Victor Mendez.

Wire Rope a Later Step in Evolution of Marine Lifesaving and Salvage efforts .........34

A short history of rescue efforts and how wire rope plays a part when things take a turn for the worst.

By Peter Hildebrandt.

Cover photo:

Akashi Kaikyo Bridge in Kobe, Japan, taken on July 15th, 2011.

See article, page 8. photo © Sean Pavone via Dreamstime.com

Departments Advertiser’s Index . .............................................79 Steel Industry News ...........................................47 The Inventor’s Corner . .......................................60 New Products .....................................................75 People in the News ............................................77 Classified ............................................................80 Wire Rope News & Sling Technology August 2014

7

Wire Rope Critical Component of World’s Longest Bridge – and Some Predecessors

by Peter Hildebrandt

The Akashi Straits in Japan is one of the world’s busiest waterways, linking Kobe on the mainland with a very densely populated outer island. Ferries have always carried passengers across the straits. But this treacherous waterway often experiences severe storms and in 1955 a pair of ferries sank in the strait due to a storm – 168 people died in those accidents.

T

he ensuing shock and public outrage about these ferry tragedies convinced the Japanese government to develop plans for a suspension bridge to cross the strait. The primary plan called for a blended railway-road bridge, but when construction on the bridge began in April 1988, it was restricted to road only, with six lanes.

Actual construction did not begin until May 1988, and the bridge was opened for traffic on April 5, 1998.

Though the amazing structure features the latest in building technology and maintenance, this longest of modern bridges also finds its roots in seven earlier bridge projects on the other side of the world from this one; each of these innovations in early bridge building would stretch the limits of technology in construction, as well as eventually leading to the construction of the

engineering marvel of the bridge over the Akashi Straits.

The first dates back to the 1700s when a critical bridge was constructed at Shropshire in England where, in 1779, the nascent industrial revolution desperately needed a way across the 30 foot wide River Severn. The purity of the area’s coke resources allowed especially strong cast iron to be created for the bridge which would be constructed. The old stone arch design simply would not work in straddling the 30 meter wide river. The serendipity of the superior coke in the area to make this bridge possible has led to the creation and construction of the bridge that remains over this now-quiet river in modern times.

Seventeen hundred precast sections of iron in five semi-circular ribs form the bridge’s graceful arch. The bridge

You can practically feel the vertigo in this view of Kobe from the top.

Photo courtesy of Honshu-Shikoku Bridge Expressway Co., Ltd.

8

Wire Rope News & Sling Technology August 2014

weighs relatively little – 380 tons – and ended up being named the Iron Bridge.

The use of such brand-new technology with cast iron, resulted in a bridge that looks surprisingly close to a structure constructed from wooden timbers.

This technological advancement in lightness of construction was carried forth in the building of the Akashi Straits Bridge which has prefabricated lattice work and contains more than a quarter million tons of steel. Steel, however, does have one great drawback: it rusts. Typhoons haunt the waterway on a yearly basis. To fight the corrosion from the wind and water left in their wake, rust-tracking robots scour the bridge’s superstructure and when they find any problems call in robot painters to patch things up.

Beneath the bridge hang three gantries which enable the required maintenance on the bridge to take place without interfering with the traffic just above on the bridge. The Menai Straits was another location where a bridge had the possibility of bringing about tremendous change. A bridge at this location had the ability to reduce the travel time from Dublin, Ireland to London, England by nine hours.

Building a bridge similar to the Iron Bridge was impractical as scaffolding required during construction was unacceptable as it would block river traffic on the busy waterway below.

Therefore the answer for this construction were stone towers for the bridge’s suspension. Anchors extend into the rocky bank some 18 meters in length.

The only way that the anchors for this bridge can fail is if the rock that hold the bridge’s suspension in place fail.

This bridge used cast iron sections for the suspension. Over 180 years later the anchorages still hold the bridge in place; one thousand vehicles cross the

The bridge seems to span the entire horizon in this night photo. Photo © Japan National Tourism Organization.

river on the old bridge each week.

On the Akashi bridge there were no rocks on the bank to anchor the monstrous structure. Holes ended up being dug and over 230,000 cubic meter of concrete poured into them, in turn holding mammoth metal frames in place. Those concrete-metal anchors extend into the ground some 60 meters. The only difference in this arrangement and that at the bridge at the Menai Straits is that the rock material hooking the endings is man made concrete and not natural rock material.

The differences are simply ones of scale and engineering. Gaps in the concrete allow the heat to dissipate so that the concrete does not crack as it is setting. Once set, those gaps are filled and the result is a solid block 50 meters in height – as well as 60 meters below the ground, analogous to an iceberg.

In 1851 work would start on the suspension bridge across the 820 foot wide (250 meters) gorge at Niagara Falls.

Here, strength would be the technological hurdle to overcome. The previously-used cast iron sections included in earlier bridge construction would be far too heavy for use in this setting.

300 tons would have to span across the gorge on this new bridge.

In 1845, 300 people crowded onto a

suspension bridge at Great Yarmouth, England to watch a circus stunt performed below. As the geese pulling a man in a barrel pass under them on the water below, the spectators all move to the other side of the bridge deck, creating a sudden unbalance. The bridge’s main chain snaps and 79 are killed in the plunge of the deck into the river.

Some six years later, the power of wire rope cable came into play as the stretching of a material Roebling’s bridge was supported by two limestone towers on each side of the gorge. These towers – reminiscent of structures found in Egypt – stood 88 feet (27 m) tall on the American shore and 78 feet (24 m) tall on the Canadian shore. With their foundations 28 feet (8.5 m) in the earth, the limestone structures could support up to 12 million pounds or 5.4 million kg). Four 10.5-inch (27 cm) thick main cables held up the bridge; two cables ran through iron saddles at the top of each tower. Each cable comprised 3,059 wires that were spun with John Roebling’s patented technique used in his Allegheny Suspension Aqueduct.

The ends of each cable were secured to 6-square-foot (0.56 m2) cast-iron plates sunk 20–30 feet (6.1–9.1 m) deep in the bedrock. Support lines hung down from iron clamps that encircled

the main cables, and held up the decks.

Deep trusses – never before seen on a large suspension bridge – lined the sides of the bridge, and joined the two decks on the structure so it looked like a cage. Trussed sides and the upper and lower decks, which spanned 825 feet (251 m), formed a “hollow straight beam”, strengthening the rigidness of the bridge.

The Suspension Bridge was further stiffened by guy-wires running from its upper deck to the top of its towers. Criticism of suspension bridges lingered in the wake of the Wheeling Suspension Bridge collapse in 1854 during strong winds in 1854. To address these concerns, Roebling added more guy-wires to secure the lower deck to the shores below. Roebling’s efforts ensured that his Suspension Bridge remained standing while other suspension bridges across the Niagara River collapsed because of strong winds.

Although he was not the first engineer to appreciate the need for a suspension bridge to be sufficiently rigid or to implement the methods to do so, Roebling was the first to understand the principles behind the methods and combine them in the building of a suspension bridge. Roebling proved that continued on next page

Wire Rope News & Sling Technology August 2014

9

The towers of the Akashi Kaikyo Bridge in Japan seem distorted from the wide-angle lens used to take this photograph at sunset.

Photograph © somphop via iStockPhoto.com.

continued from previous page despite popular opinion, properly built suspension bridges can safely support the passage of heavy railway traffic.

The engineer’s combination of stiffening methods created the first modern suspension bridge.

Such was the rigidity and strength of this innovative new suspension bridge that it withstood the shockwave caused by the nearby fall of a 5,000-short-ton rock in 1863; the force caused a wave to ripple through the decks of the bridge from the American side to the Canadian side and back.

The Akashi Bridge has a massive collection of cables strong enough to support 90 Niagara Bridges. One of its main cables is over a meter in diameter and composed of thousands of smaller cables. The first bundle of 127 wires was taken across by helicopter, instead of by pulley as in the case of the Niagara Gorge Bridge. Each of the cables on the Akashi Bridge weighs some 25,000 tons, in addition to containing enough wire to circle the earth seven times.

The Brooklyn Bridge, a younger cousin of the Niagara Gorge railway bridge, had to discover a way to deal with the 10

problem of constructing the anchors for its support towers out in the 1969 foot (600 meter) wide, swift-flowing East River. The mucky river bottom is far too soft to support the proposed bridge towers so as a result the wood caisson was developed. With this method a water-tight wooden box was floated out to where the foundations would be and sunk down into the mud so workers could reach the bedrock below.

Eventually the wooden caisson itself would be filled with concrete to, in turn, serve as the bridge’s tower foundation. To achieve a solid foundation for the bridge, workers excavated the riverbed in massive wooden boxes called caissons. These airtight chambers were pinned to the river’s floor by enormous granite blocks and air under pressure was pumped in to remove water and debris.

“Sandhogs” – mainly immigrants who earned some $2 a day – shoveled and blasted to clear away the mud and boulders at the bottom of the river.

Each week, the caissons crept closer to the bedrock. When they reached an adequate depth – 44 feet on the Brooklyn side and 78 feet on the Manhattan side

Wire Rope News & Sling Technology August 2014

– granite was laid as they worked their way back above ground.

Issues involved with the caissons, including a deadly disease bearing the name of the structure, were worked out. The “bends” a sometime fatal affliction caused by gases coming out in the blood when decompression happened too quickly, could be avoided by simply slowing the decompression process. The Akashi Bridge used the same principle but vastly improved technology for sinking its towers’ foundations, swapping wood for huge round steel structures sunk to the base bedrock and filled.

The Golden Gate Bridge developed technology for making the bridge towers much higher than in the case of the Brooklyn Bridge. Innovative steel panels made the construction of these vastly higher towers possible, as was the case with construction of the Askashai Bridge’s even loftier structures across a much wider stretch of water.

To deal with the terrible storms in the typhoon alley of the area, the bridge builders took a cue from the construction of the Verrazano Narrows Bridge at the entrance to New York continued on page 12

Super shackles up to 50% stronger than a standard shackle • High quality alloy shackles • Meet performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B • Complete range: working load limit 3.3 up to 175 t (metric tons) • Directly available from our stock in Houston Van Beest B.V. has branches in The Netherlands, France, Germany and USA

E-mail: sales.us@vanbeest.com

www.vanbeest.com

Member of Van Beest International

through the bridge’s deck structure. Scientists had one last detail to deal with – that of the great earthquake danger in one of the most seismically active areas in the world. They took flexibility of the steel towers and ten ton dampeners within to lessen the power and force of the vibrating earth. When tested, the dampeners reduced side to side movement appreciably.

In the end, the bridge was constructed with three spans. Its central span is 1,991 m (6,532 ft), and the two other sections are each 960 m (3,150 ft). The bridge is 3,911 m (12,831 ft) long overall. The two towers were originally 1,990 m (6,529 ft) apart: an earthquake which came to be known as the View near the Sun Yat-sen Memorial Hall. Photo courtesy of Honshu-Shikoku Bridge Expressway Co., Ltd. Great Hanshin Earthquake on January 17, 1995, moved continued from page 10 pass beneath the 12 lanes of traffic in the towers enough – only the towers had Harbor. That structure contains an two levels on the bridge. been erected at the time – that the span open grid structure underneath to alThe Akashi Bridge took things even had to be increased by one meter (3.3ft). low the structure to stay as stable as further with special “wind tunnel” The bridge’s two hinged stiffening possible and to allow strong winds to structures to funnel the wind quickly continued on page 14

12

Wire Rope News & Sling Technology August 2014

!

New & Innovative Products & Processes for the Lifting, Rigging & Load Securement Industryª

High Capacity Production Roundsling Machinery ¥ ¥ ¥ ¥ ¥ ¥ ¥

The RSM PRO & HC quickly and efÞciently produce a full range of roundslings. !

The TCM mechanically prepares seamless covers, saving time and labour.!

Multiple roundslings can be run at the same time at very high speeds. !

The tailstock glides easily into position and pneumatically locks in place. !

Remote operation allows the operator to fabricate from a safe distance. !

Automatic tension control and yarn equalization for optimum performance. !

Manufactured in North America. Manufactured in England with CE approval.!

Gigasense Crane Safety Monitor ¥ The CSM is an electronic control unit to be used in overload protection systems.! ¥ The system evaluates and computes signals from force transducers and can be set for alarm at preset alarm limits. ! ¥ The CSM is self checking. All faults result in overload indication. It monitors the operational conditions of the crane as well as the recommended service intervals.! ¥ Safety: Protects personnel and property against hazards due to overload. !

Industry First!!

Maneuverable LED Swager Work Light

Visit our interactive booth at the AWRF P.I.E. October 27th, 2014. St. Louis, Missouri, USA.

Multi-directional warning light indicates to others that the swager is on. !

Universal Die Pocket accommodates both One Press¨ and multi press dies.

Safe use guides.

Dies bolt quickly and securely into place.!

Die pocket rotates 360û ! for easy access and ergonomic positioning.!

Conveniently located pressure valve and oversized gauge for improved visibility and accuracy.

Covered electronic foot pedal allows the operator full manual control of the swaging action. !

Pump is fully enclosed and insulated for exceptionally quiet operation. !

Universalª Swagers

In Stock for Immediate Delivery

The One Press¨ Swaging System is the fastest and most reliable method of swaging Flemish eye wire rope slings and assemblies. One Press¨ single stage dies swage carbon steel One Press¨ sleeves from 1/4Ó up to 1-1/2Ó completely in just one press, saving considerable time and labour. !

U.S. Patents #5,816,094 & #6,032,338, Canadian Patent #2,172,267, and other International Patents.

!

Contact Strider~Resource today to learn more about our full range of Smart Systems.

Phone: +1 (905) 859.3901 Email: service@strider-resource.com Website: www.strider-resource.com

continued from page 12 girder system, allows the withstanding of winds of 286 kilometres per hour (178 mph), earthquakes measuring up to magnitude 8.5, and rough sea currents. The bridge contains pendulums able to operate at the resonance frequency of structure to dampen forces.

The two main supporting towers rise 282.8 m (928 ft) above sea level, and the bridge can expand because of heat by up to 2 m (7 ft) over the course of a day. Each anchorage required 350,000 tonnes (340,000 long tons; 390,000 short tons) of concrete. The steel cables have 300,000 kilometres (190,000 miles) of wire: each cable is 112 centimeters (44 inches) in diameter and contains 36,830 strands of wire.

The Akashi-Kaikyo bridge has a total of 1,737 illumination lights: 1,084 for the main cables, 116 for the main towers, 405 for the girders and 132 for the anchorages. On the main cables three high light discharged tubes are mounted in the colors red, green and blue. The red-green-blue (RGB) model and computer technology make for a variety of combinations for lighting the bridge.

The total cash outlay for the bridge is estimated at 500 billion yen, and is expected to be repaid by charging driv-

A view of the maintenance walkway, used during tours, leading to the lift that takes you to the top of the tower. Photo © Sean Pavone via iStockphoto.com

ers a toll to cross the bridge. The toll is 2,300 yen and the bridge is used by approximately 23,000 cars per day. At 2300 yen/car annual revenue would equal 19.5 billion yen.

Given the interest expense on 500 billion yen, this bridge, perhaps may never be repaid. But then again, annual revenue is around 4% of investment, so

1-2_ALG_WRN_June2014_7W x 4_875H_D_Layout 1 5/29/14 11:57 AM Page 1

with near zero interest rates in Japan, the bridge should be able to pay for itself in 30 years, plus enable the growth of the overall economy in the region. For the time being, the bridge remains the longest suspension bridge in the world, a technological wonder built on the innovations of seven previous bridges over the past 200 years. WRN

Adjust \əˈjəst\ verb - to change in order to work or do better in a new situation

Adjustable Lifting Grab

• Heavy Duty Design • Lifts 3-60” shapes • 6,000 lbs. capacity • Adjustable ergonomic handles • Stainless steel Auto-Latch

• Locating assembly • Easy attach lifting eye • Replaceable polyurethane pads • Complies with ASME standards

The Caldwell Group • 5055 26th Ave. Rockford, IL 61109 • 800.628.4263 • caldwellinc.com 14

Wire Rope News & Sling Technology August 2014

As Technology Changes, Exploration Equipment Relies on an Expanding Variety of Lines

by Henry Vere

For as long as we’ve gone out on the water we’ve also needed to search underwater when things go wrong. Ropes tethered search equipment at first until remote, selfpowered machinery needed ropes only to lower it into the water. Whether such equipment ever successfully locates the resting place of the Malaysian Airlines now-famous Flight 370 has yet to be seen. The odds may be worse than finding a needle in a haystack. But the best equipment, technology, wire and synthetic ropes remain available as the search continues.

R

obert Ballard, famous for discovering the Titanic’s final resting place, has also been involved in some 140 expeditions which he refers to as “wandering.” Since 72% of our planet is covered by the miracle of liquids – water – it makes sense that Ballard was drawn to the waters of the earth in his wanderings.

The average depth of the oceans of the world is 12,000 feet. Depths reach to 70,000 feet and 100,000 feet where pressures are unbearable for human life. Ballard takes pride in going to places no human has ever gone. But these excursions would not be possible with the tethers, connections and umbilical cables involved, state-of-the-art

technology that makes life possible in this unbearable locations.

Ballard has made some discoveries that have changed the way we think about our undersea environs. The black smokes all along the mid-ocean ridges for instance are now known to be places where water goes both in and out of the earth’s crust. The chemistry continued on page 18

US Navy Mineman 3rd Class DustinMoore, assigned to the mine warfare ship USS Patriot (MCM 7), retrieves a mine neutralization vehicle (MNV) after the device conducted an underwater water mine survey.

16

Wire Rope News & Sling Technology August 2014

ROV working on a subsea structure.

of the seawater in turn changes as do the dynamics involved with the saltiness of the water. In other deep sea discoveries Ballard located an animal with no digestive system; another creature lives inside the first, doing that work in a symbiotic relationship.

Just to show how unglamorous the work of deep water exploration can be, Ballard mentions that on average it takes him two and a half hours to descend to the ocean bottom each morning, another two and a half to ascend to the surface vessel after some two hours of actual work on the seafloor, with a mile – if that – covered laterally while down there. Ballard moved into robotic exploration in 1982, being drawn especially to the great iconic shipwrecks of relatively recent time, such as the Titanic, Bismarck, and that of the aircraft carrier Yorktown near Midway Island. The Bismarck was found in 16,000 feet of water.

There is more history on the seaAll photos courtesy of Egan Maritime Institute Nantucket Shipwreck & Lifesaving Museum

floor, according to Ballard, than in all the museums in the world. His more recent efforts have even yielded the remains of wooden wrecks from ancient times, where in the Black Sea perfectly preserved ships, 1500 years old, some from 500 BCE contained human remains. Unfortunately an area trawler destroyed the site before further exploration or preservation could be accomplished.

In 1983 President Reagan signed into law the idea that our jurisdiction as a nation extended 200 miles out to sea – increasing our country’s size by 50% albeit much of it underwater. But at the same time we’ve now been given much more to explore, or exploit if we are not wise about the uses with which we put this windfall to. The United States now owns more undersea real estate than any other nation, 11,351,000 square kilometers and doubling our size.

The need for protection has never been more urgent and adequate underwater exploration equipment, instruments, technology and wire rope and

other lines will no doubt be in demand.

Protection is needed, sanctuaries set aside, according to Ballard, though the pressure for mining, harvesting and extraction will be great. In 2009 an Ocean Exploration Trust was set up.

Ballard purchased, very inexpensively, a retired East German spy ship which he converted for mapping the ocean floors and for further exploration. He has also created a Nautilus Corps of Exploration to encourage young future wanderers, 55% of which are mandated to be women; as Ballard explains it, the Lois and Clarks of the 21st Century, for undersea exploration.

NOAA doesn’t necessarily use anything special for their operations. They don’t normally specify any cables and try to use cables that are traditional, cables basically used as a standard throughout the oceanographic industry. Any oceanographic vessel supported by the fleet has to have that the type of cable on a drum.

“We’re not cable experts,” explains continued on next page

Wire Rope News & Sling Technology August 2014

17

uses have a substantial component ing operations can be huge. The Robcontinued from previous page David Lovalvo, a NOAA contractor or member built into the cable design erts Testing Equipment’s test beds for who is chief engineer with NOAA’s that surrounds the electrical compo- such lines are wide enough for a fork Deep Submergence Program in their nents. This not only protects them but lift to drive down the center. One test Office of Exploration. “The cables it takes the load needed on that cable bed is for three million pounds. The that we use have a standard de- without damaging the wiring or the fi- bed is 206 feet long and eight feet six sign, though they are custom made ber optics. If any load is placed on fiber inches wide. The sling is so huge that through Rochester Wire and Cable, optics cable that cable will be broken, it must be loaded into the test bed by LLC, in Culpepper, Virginia. These according to Lovalvo. This load is sup- a huge crane and the cover is put in are proven, tested products. Other posed to be physically disconnected place at the end of the test bed with a firms that produced them include from that of the fiber optics component large forklift.

Much of that exploration will involve suspended from it.

South Bay and Cortland.

“That’s really important as things be- work with remotely operated under“Our particular operation uses Rochester’s standard proven design of cable. come a little more complex,” adds Lo- water vehicle in ROV works for exploIt’s armored on the outside and has var- valvo. “How things work when you ter- ration of the undersea environment, ious components on the inside, fiber op- minate those cables can also be kind of including in the underwater oil and tics, power conductors and has a special interesting because you can terminate gas fields. The ROV is a tethered untype of insulation. All of that is made to them in a variety of different ways and derwater vehicle. They are common in specifications. This is a very technical there are a variety of different types of deep water industries such as offshore field and this is not just cable. Our soft connectors that you can purchase that hydrocarbon extraction. ROVs are unoccupied, highly maneuverable, and cables used between two underwater allow you to terminate the cable.

“There are companies out there that operated by a crew aboard a vessel. vehicles are also made by Rochester.”

They’re linked to the ship by either a The cable is very highly engineered make connectors that can be molded and it follows very rigorous specifica- onto a cable or they can attach in some neutrally buoyant or, often when worktions, therefore the cable is also quite other way. That technology is then part ing in rough conditions or in deeper expensive, typically 200,000 dollars for of how these cables are used on these water, a load-carrying umbilical cable 7,000 meters of armored cable. If the underwater vehicles. Wire rope is com- is tethered as well as a tether managecable is not built right it doesn’t last. pletely different; there is no threat to ment system or TMS (TMS). The TMS “We use the cable for ocean explora- that industry with the development of is either a garage-like device which contains the ROV during lowering through tion,” adds Lovalvo. “We use it for our all this fastening technology.”

Critical for ropes both on land and at the splash zone or, on larger work-class underwater robots, underwater ROVs for ocean exploration; we’re not in the sea is testing. Roberts Testing Equip- ROVs, a separate assembly which sits ment tests a wide variety of wire rope on top of the ROV. The TMS lengthens oilfield business.

“There are also a whole bunch of slings and products, including materi- and shortens the tether so the effect of different cables on the vehicles that als used for offshore oil drilling proj- cable drag where there are underwater connect components. In addition to ects and exploration. The wire rope currents is minimized.

The umbilical cable is an armored tether cables and umbilical cables slings needed and used in the offshore continued on page 20 you have standard cables connecting oil industry for exploration and drillcomponents. A submarine, such as Alvin which was used in the exploration efforts during the search for Titanic, is not tethered but a camera collecting data for Alvin would be tethered and may contain fiber optics for photography.

“The cables are often referred to as mechanical and electronic as they must have both incredible strength and contain components that allow the transfer of data. As an example, if you have your extension cord at home that you plug into your interior wall to power your drill; that extension cord doesn’t have a lot of strength. Despite it carrying electrical power, if you were to try to lift something with that cord you probably would damage it.” right: Cutlet, one of the World’s first Remotely Operated Vehicles. Works at any depth and the arm is used to The cables that NOAA grip torpedoes. This has an aluminum frame and was used for dangerous work from the 1950s to the 1980s.

18

Wire Rope News & Sling Technology August 2014

Sea-Link Quality Blocks

Construction – Marine – Wood Shell – Cargo Hoist - Specials Manila Rope Models:

Wood Shell: Regular and Extra Heavy Steel Shell: Regular and Malleable Style Snatch Blocks: Wood and Steel Shell (up to 24")

Wire Rope Models:

Regular: Oval and Diamond Pattern Construction: Medium and Extra Heavy Snatch Blocks: 3 Ton to 12 Ton Capacity Cargo Hoist and Fishing

Available:

US Government Spec., ABS, Germanischer Lloyd

Associated Wire Rope & Rigging, Inc. 8125 Saran Dr., Playa del Rey, CA 90293 Ph: 800.901.1135 Fax: 310.448.5446 Email: sales@awrrinc.com

Waterman Supply Co.

910 Mahar Ave., Wilmington, CA 90748 Ph: 800.322.3131 Fax: 310.522.1043 Email: sales@watermansupply.com

continued from page 18 cable that contains a group of electrical conductors and fiber optics that carry electrical power, video, and data signals between the operator and the TMS. Where used, the TMS then relays the signals and power for the ROV down the tether cable. Once at the ROV, the electrical power is distributed between the components of the ROV. However, in high-power applications, most of the electrical power drives a high-power electrical motor which drives a hydraulic pump.

This pump is then used as a driving force and to power equipment such as torque tools and manipulator arms where electrical motors would be too difficult to implement subsea. Most ROVs are equipped with at least a video camera and lights. Additional equipment is commonly added to expand the vehicle’s capabilities. These may include sonars, magnetometers, still camera, manipulator or cutting arm, water samplers, and instruments measuring water clarity, water temperature, water density, sound velocity, light penetration, as well as temperature.

In the 1970s and ‘80s the Royal Navy used “Cutlet”, a remotely operated sub-

ROV being launched into the Ocean.

mersible, to recover practice torpedoes and mines. Submersible ROVs have been used to locate many historic shipwrecks, as mentioned earlier, including such legendary ships as the RMS Titanic, Bismarck, Yorktown, and the gold-laden SS Central America. ROVs have been used to recover material from the sea floor and bring it to the surface. While the oil and gas industry uses the majority of ROVs, other applications include science and military.

Work-class ROVs are built with a large flotation pack on top of an alu-

minium chassis to provide the necessary floatation to perform a variety of tasks. Syntactic foam is often used for the floatation material. A tooling skid may be fitted at the bottom of the system to accommodate a variety of sensors or tooling packages.

By placing the light components on the top and the heavy components on the bottom, the overall system has a large separation between the center of buoyancy and the center of gravity providing stability and the stiffness continued on page 22

EASY PICKING Our new HMH Series of portable AC electric hoists allow you to choose from wire rope or strap with latching bail or trolley mounts. Weighing in at less than 50 lbs, these units can lift up to 750 lbs at 37 feet per minute — a combination that makes them welcome wherever there's work to be done.

See them at www.hookmountedhoist.com Toll Free: 800.248.4896 Phone: 503.626.0654 Beaverton, Oregon

Manufactured by Allied Power Products, Inc.

20

Wire Rope News & Sling Technology August 2014

continued from page 20 to do work underwater.

Electrical components can be in oilfilled water tight compartments or oneatmosphere compartments to protect them from corrosion in seawater and being crushed by the extreme pressure exerted on the ROV while working deep. Thrusters are usually in a vectored configuration to provide the most precise control as possible. The ROV will be fitted with cameras, lights and manipulators to perform basic work.

Additional sensors and tools can be fitted as needed for specific tasks.

The majority of the work-class ROVs are built as described above; however, this is not the only style in ROV building method. Specifically, the smaller ROVs can have very different designs, each geared towards its own task.

As their capabilities grow smaller ROVs are also increasingly being adopted by navies, coast guards, and port authorities around the globe, including the U.S. Coast Guard and U.S. Navy, Royal Netherlands Navy, the Norwegian Navy, the Royal Navy and the Saudi Border Guard. They have also been widely adopted by police departments and search and recovery teams. Useful for a variety of

underwater inspection tasks such as explosive ordnance disposal (EOD), meteorology, port security, mine countermeasures (MCM), and maritime ISR (Intelligence, Surveillance, Reconnaissance).

The United States Navy funded most of the early ROV technology development in the 1960s into what was then named a “Cable-Controlled Underwater Recovery Vehicle” (CURV).

This created the capability to perform deep-sea rescue operation and recover objects from the ocean floor, such as a nuclear bomb lost in the Mediterranean Sea after the 1966 Palomares B-52 crash.

Building on this technology base; the offshore oil & gas industry created the work-class ROVs to assist in the development of offshore oil fields.

More than a decade after they were first introduced, ROVs became essential in the 1980s when much of the new offshore development exceeded the reach of human divers. During the mid-1980s the marine ROV industry suffered from serious stagnation in technological development caused in part by a drop in the price of oil and a global economic recession.

Since then, technological develop-

ment in the ROV industry has accelerated and today ROVs perform numerous tasks in many fields. Their tasks range from simple inspection of subsea structures, pipelines, and platforms, to connecting pipelines and placing underwater manifolds. They are used extensively both in the initial construction of a sub-sea development and the subsequent repair and maintenance.

Perhaps due to its immortalizing in film, imagination and memory, the wreck of the Titanic remains perhaps one of the most famous and successful search efforts with its discovery 74 years after it sank on its first and last voyage. In the mid-1980s a joint French and American exploration effort searching for the Titanic wreck searched with an undersea sonar and video camera devices towed along the bottom by cable some two miles deep.

The fact that the wreck of the Titanic was not found on the first attempts to locate it, but finally in 1986, after repeated tries was found some two miles under the North Atlantic, highlights the importance of persistence, patience, perseverance and making sure you have enough of the correct types of cable on hand as well. WRN

A DIVISION OF

® R i g · h T t e c a i l m P e t h g i R · t c u d o r Right P SOUTHERN WIRE®

Call Today 1-800-238-0333 Olive Branch, MS • Kansas City, MO • Houston, TX • Los Angeles, CA • Tampa, FL • Chicago, IL • Philadelphia, PA • Seattle, WA

www. southernwire.com

22

Wire Rope News & Sling Technology August 2014

y c n e i c Effi

The LKA 28 is designed to cut pre-formed wire ropes from 5-28 mm (.19” to 1.125”) in diameter.

LKA 28

The control system is based on a PLC with a 7” touch screen Easy operation is due to many set-up possibilities and simplified menu system.

A fully automatic cutting machine for wire ropes with a diameter of 5-28 mm.

The LKA 28 is extremely accurate with a very precise cut length system with automatic calibration. The tube and feeding units are operated pneumatically. Hydraulic shears perform the cutting operation. The shears are designed for 1960 grade wire ropes.

Chant Engineering is the North American Representative for TALURIT Customers outside North America are welcome to contact Talurit AB for more information and pricing. www.talurit.com

Chant Engineering Co., Inc.

TESTING MACHINES WIRE ROPE GRIPS REELING MACHINES CALIBRATION Chant

.

., Inc

Co ering

Engine

MACHINERY FOR THE WIRE ROPE INDUSTRY 215.230.4260

www.chantengineering.com

Wire Rope Does its Part in Preserving Costa Rican and Puerto Rican Rainforests

by Victor Mendez

For such a small Central American country, Costa Rica certainly has a lot going for it, naturally speaking. Visitors lucky enough to travel there can experience volcanoes, rainforest, beaches, national parks, cloud forests, hot springs, and much more with just a minimum investment of their time. Also, perhaps no place on earth has such an extensive network of wire rope lines on which tourists can discover the rainforest canopy surrounding them. To the east, the island of Puerto Rico has also begun to take advantage of the demand for zipping through the rainforests, and with one firm, up into the island’s hills and mountains.

All photos courtesy of Ecoquest, Inc.

C

osta Rica is considered to possess the highest density of biodiversity of any country on earth. Worldwide. While encompassing just one third of a percent of Earth’s landmass, approximately the size of West Virginia, Costa Rica contains four percent of species estimated to exist on the planet. Hundreds of these species are endemic to Costa Rica, meaning they exist nowhere else on earth. These endemic species include frogs, snakes, lizards, finches, hummingbirds, gophers, mice, cichlids, and gobies among many more.

Costa Rica’s biodiversity can be attributed to the variety of ecosystems within the country. Tropical rainforests, deciduous forests, Atlantic and Pacific coastline, cloud forests, and Mangrove forests are all represented throughout the 19,730 square miles of Costa Rica’s landmass. The ecological regions are twelve climatic zones. This variation provides numerous niches which are filled by a diversity of species. For such a tiny country it is mindboggling that in addition to the vast number of animal and plant species that there are also some 41 different micro climates in this place as well.

Costa Rica, with its demonstration of biodiversity conservation is no doubt an excellent role model for developing countries. Nearly 30% of the country’s land has protected status as national park land, wildlife refuges, or forest preserves. The Costa Rican government has made the decision to protect its biodiversity for the ecological benefits they provide. The government even has a five percent tax on gasoline to continued on page 26

24

Wire Rope News & Sling Technology August 2014

continued from page 24 generate revenue to pay landowners to refrain from clear-cutting on their land and instead to create tree plantations.

This provides Costa Ricans, or “Ticos” as they call themselves, to encourage their fellow countrymen and women to become active tree farmers instead of cattle ranchers. Tree farms provide some habitat for wildlife, enabling some measure of biodiversity to remain in these areas despite humans’ use of these natural resources.

Costa Rica’s biodiversity contributes to the numerous ecological services the environment provides. Every aspect of the ecosystem from the different species of plants to the diversity of animal species contributes to natural services like water purification, provision of food, fuel, fiber, and biochemicals, nutrient cycling, pollination and seed dispersal, and climate regulation, just to name a few. As the diversity of species increases, more of these services can be provided and to a greater extent.

Biodiversity has contributed to the economy of Costa Rica. Ecotourism brings in 1.92 billion dollars in revenue for the country. Ecotourism directs traveller toward exotic, often threatened, natural environments, especially to support conservation efforts and observe wildlife.” Costa Rica’s abundant biodiversity makes the country an attractive destination for ecotourism.

Thirty-nine percent of travelers to this Central American country now credit nature as their primary explanation for visiting the country. The profitable industry of eco tourism entices businesses to capitalize on natural resources by protecting and preserving them rather than consuming them.

As with so many other nations and places worldwide, threats to the biodiversity of Costa Rica include a rapidly growing population, developing

26

coastlines for the industry of tourism and harmful agricultural practices all contributing to pollution and environmental degradation. The practice causing the largest concern for Costa Rica’s environment is deforestation. Costa Rica has the fourth highest rate of deforestation in the world. Almost four percent of its current forested lands are cut each year.

Clearing land for cattle ranching is the most common cause of deforestation. This form of environmental damage along with the farming of monocultures leads to areas where only a few species of plants are present. Ultimately, decreases in plant diversity leads to decreased animal diversity.

There are about 1,251 species of butterflies and at least 8,000 species of moths. Butterflies and moths are common year round but are more present during the rainy season. Ten percent of known butterfly species worldwide reside in Costa Rica.

Costa Rican butterflies and moths have made amazing adaptations to the environment. Some examples of these are the swallowtail caterpillars imitating bird droppings while other have bright coloration to warn assailants

Wire Rope News & Sling Technology August 2014

of bodily toxins. Ecotourism remains one of Costa Rica’s primary economic resources, and the country’s butterflies enhance that activity, though zipliners may not be able to notice something as delicate as a Zebra Longwing, Banded Peacock or Glasswing until they reach one of the interconnected canopy tour platforms. Such insects bring life to Costa Rican and Puerto Rican rainforests, not only with the diversity in color but with the splendor of the blossoms they help pollinate.

Amphibians may be the creatures that get the most press and attention here.

Costa Rica is home to some 175 amphibians - 85% of those species are frogs. Frogs in Costa Rica have interesting ways of finding fishless water to raise their young in, as fish will eat tadpoles and frog eggs. Poison Dart Frogs lay their eggs in water pools in certain types of plants called bromeliads. Other ways of surviving include searching ponds before laying eggs, and laying eggs in wet soil.

Notable frog species in Costa Rica include Red-eyed Tree Frogs, species of Poison Dart frogs, semitransparent glassfrogs and Smoky Jungle frogs. continued on page 28

www.yoke.net www.yoke.net www.yoke.net

! w e N ew !!

New N

!

E BLLE !

A ILLAB A AVVAI LE !

W A B O A N OW L I N A AV YOKE’S DISTRIBUTORS OWIN NORTH AMERICA: N YOKE’S DISTRIBUTORS IN NORTH AMERICA: USA CANADA Quality approval by: Quality approval by:

Quality approval by:

CANADASLR INC. B/AUSA PRODUCTS CO. HERCULES B/A PRODUCTS CO. TEL : +1 410-381-1700 HERCULES SLR INC. TEL : +1 902-482-3125 TEL : +1 410-381-1700 DOMINION STEEL SPECIALIST INC. IN TEL YOKE’S DISTRIBUTORS NORTH AMERICA: : +1 902-482-3125 OCEANSIDE EQUIPMENT LTD. STEEL SPECIALIST INC. TELDOMINION : +1 713-678-8141 OCEANSIDE EQUIPMENT LTD. TEL : +1 902-468-4844 USA CANADA TEL : +1 713-678-8141 U.S. RIGGING SUPPLY TEL : +1 INDUSTRIES 902-468-4844 LTD. SATURN SUPPLY B/A PRODUCTS CO. TELU.S. : +1RIGGING 714-545-7444 HERCULES SLR INC. SATURN INDUSTRIES LTD. TEL :: +1 204-633-1529 +1 714-545-7444 TELTEL : +1: 410-381-1700 TEL +1 902-482-3125 TEL : +1 204-633-1529 DOMINION STEEL SPECIALIST INC. OCEANSIDE EQUIPMENT LTD. TEL : +1 713-678-8141 TEL : +1 902-468-4844 U.S. RIGGING SUPPLY SATURN INDUSTRIES LTD. TEL : +1 714-545-7444

continued from page 26 Notable toads in Costa Rica are the ten species of Bufo toads and the Giant toad, a huge toad known for its wide appetite. It has been known to eat nearly anything, including vegetables, ants, spiders, any toad smaller than itself, mice, and other small mammals.

Besides the frog species, approximately 40 species of lungless salamander as well as two species of caecilian – found in the country, both rarely seen and little known. Costa Rican amphibians range in size from the Rainforest Rocket Frogs, 0.5in, to the Giant toad, at up to six inches in length and four pounds.

Representatives of all three orders of amphibians - caecilians, salamanders, and frogs and toads - reside in Costa Rica. Due to environmental degradation and the sensitive nature of amphibians to pollution, Costa Rica has seen declines and even extinctions in amphibian populations. Monteverde Cloud Forest Reserve is a critical habitat for certain species of the order Anura. However, forty percent of the members of this order that reside in this reserve are estimated to have gone extinct since 1987. This equals twenty species of frogs and toads.

Zip riders probably spot wildlife a bit

larger though, including the wide variety of monkeys, wild cats and birds.

Venonous snakes are not a problem if given wide berth nor are the tiny blood-drinking vampire bats found in the country.

One way to see the rainforests and it astounding variety of wildlife, within its borders doesn’t even involve treading on the ground beneath the trees.

A profusion of wire rope cables dangle above for zip-liners and sightseers creating a wide variety of options available to choose from.

The more rustic or primitive of the lines involved leap-frogging from platform to platform across the forest treetops. A tram takes the riders to the beginning platforms. Pelvis harnesses, gloves and helmets are standard equipment. Guides assist travelers up onto platforms as they zip from station to station. Gravity does the bulk of the work of moving each Eco-tourist – or thrill-seeker.

Luis Flores, at the University of Costa Rica’s School of Tourism both studied his country’s zip-line tour setup and experienced zip-line touring firsthand.

“My experience with the lines highlighted how difficult the sport of ziplining can be,” explains Flores. “It does

take some upper body strength to hang on to and ride the lines on some of the tours. There are no brakes on the tours because when the zip-line finishes you stop naturally.”

The tour that Flores took, as is the case with many day tours, took some four hours to complete. Zip-line companies typically transport you from the nearest town to where ziplines are located, taking you from the hotel located there. A release form must be signed to relieve the touring company of any responsibility for accidents. “Tours are not 100% safe; no helmet is required by riders, though the guides typically do where helmets and gloves. Some walking is involved during which time guides explain about the flowers and other vegetation as well as wildlife in the rainforest.”

A tour can take up to 50 individual wire rope zip lines. Some of the lines go very short distances, while others are quite long, according to Flores. If a certain stretch seems too treacherous, zipline travelers can walk that particular section. Rider speeds can run up to some 40 mph and one stretch goes over a huge, deep hole; at other points zipliners may catch a glimpse of the continued on page 30

Carbon • Alloy • Stainless

Nut Eyebolts • Eyebolts Turnbuckles & Fittings • Rod Ends

• Set-Up Wedges

• Eye Nuts

• C-Clamps & Screws

• Pad Eyes

• D-Rings & Clips

• Strap Clamps

• Swivel Hoist Rings

• T-Slot Nuts

• Custom Forgings

Made in USA

In-Stock Same/Next Day Shipping www.kenforging.com sales@kenforging.com / info@kenforging.com 28

Wire Rope News & Sling Technology August 2014

Toll-Free: 888-KEN-FORGING (536-3674) Phone: 440-993-8091 • Fax: 440-992-0360 1049 Griggs Road • Box 277 • Jefferson, Ohio 44047

Open and Closed Swage Sockets Material: Forged from special C-1035 steel, ďŹ ne grain, Special bar quality.

Finish: Spheroidized annealed for cold swaging.

Proudly Made The Industrial Standard for Structural Hardware Since 1864

ClevelandCityForge.com

in the USA

1.800.431.4350

continued from page 28 lovely Costa Rican coast.

Flores took his zipline tour to fulfill part of the requirements for his major. “It’s safe,” adds Flores about the zipline rides tourists take. “Guides always check the lines, going first across a zipline stretch themselves and then calling back to the guide remaining behind with the riders that everything is fine.

“To get down at the last tree, riders typically need a push to drop to the last ten feet to the ground; this is while still

hooked up to the line. After the tour is done there is a very nice lunch, something like a picnic. They want you to have a great experience.”

The particular canopy tour Flores took is run by a husband and wife team which also runs a hotel. The husband runs the zipline tours and the wife runs the hotel. Though it may seem that the entire course would naturally be gravity-powered, all downhill. The reality is that in most situations riders may have to walk to a higher stretch and ride down before doing a similar action

30

Wire Rope News & Sling Technology August 2014

BR

R

F

A

S

SOCIATE AS D

I C AT

O

at the next treetop station or perhaps dipping ever lower.

Winter is the busy season in Costa Rica with many Americans escaping the cold weather to do zipline tours in the tropical climate further south. The weather is fair that time of year. In the summer, Central America’s wet season, there are fewer tours due to the heavy rains.

The La Fortuna/Arenal (nearby El Castillo – an approximate 25 minute drive from downtown La Fortuna) tour option, for example, is the only canopy tour to automatically include the sky tram aerial tram ride with the sky trek canopy tour. This tour option also provides the option of being combined with Sky Adventures’ sky walk hanging bridges tour. This canopy tour has 10 cables with length spans of 200 meters to 750 meters. Also included as a special feature is a complimentary sky tram aerial tram ride. Riders must be at least eight years old. This particular tour has an automatic braking system.

Costa Rica’s natural life comprises all naturally occurring animals, fungi and plants residing in this Central American country. The land supports an enormous variety of wildlife, due in large part to its straddling of land between the North and South American continents, neotropical climate, and broad assortment of habitats. Costa Rica is home to more than 500,000 species representing close to four percent of the total species estimated worldwide; the country is one of 20 with the highest biodiversity on earth – even if out of these 500,000 species, slightly more than 300,000 are insects. continued on page 32

continued from page 30 Puerto Rico’s zipline tours typically contain two wire ropes on their sections as opposed to what is found in much of Costa Rica with their one line runs.

Petzl is the brand that they use for much of their equipment at Ecoquest, including their pulleys.

“In the United States and in Puerto Rico we use two lines,” explains Luigi Diaz, manager of Ecoquest, which is headquartered in San Juan, Puerto Rico. “In Costa Rica they tend to use one line. What makes us different, I feel has more to do with the service and experience that tourists receive. It comes down to how you treat the people and how trained your guides are. In Costa Rica the maintenance may not be very good, the platforms are rotten in places and on certain lines, because of the poor quality of the lines, riders must jump before reaching the end of the line.

“The pulley is designed to go straight and not go up and down on these runs in Costa Rica. But the most important point is how you’ve trained your people and then how people feel when they’re coming off your tour. Even if you just have three lines on a particular tour but have the best people in the world guiding it, your zipline tour will be a better more memorable tour than one with many more lines in it.”

EcoQuest sales volumes are great for the most part because of the guides that they use, according to Diaz. It all comes down to training and how well the guides are compensated. “To pay a guide an hourly wage is not a good idea; these are people’s lives that are on the line,” adds Diaz.

“Ecoquest’s ziplining operation in Campo Rico contains seven ziplines that go from 800 feet all the way to 1,000 feet. Our longer lines are thicker lines than the shorter ones, as the longer ones cover more distance. We have a tour that is a canopy tour in one of our rainforests and then we have another in a subtropical forest that travel from mountain to mountain – riders reach the mountaintops and then go back down into the jungle. The experience does include some hiking in between the ziplining as well. There are swinging bridges and at the end of the tour we serve our guests a Puerto Rican lunch.”

Diaz considers their operation in the San Salvadoran rainforest as one way to escape the crowds of the mainland and get wet in a hidden treasure just 40 minutes away from the metro area.

“We enable visitors to explore, trek and climb through cascading clear waterfalls and abundantly colored flora 32

Wire Rope News & Sling Technology August 2014

and rocks found in the San Salvador Rainforest, located in the beautiful mountains of Caguas,” adds Diaz. “This place is immaculately clean, quiet and secluded. Knowledgeable and friendly tour guides enlighten travelers on the ecology, history and culture of this dramatic region that was once populated

by Taino indians.

“This full-day experience includes five exhilarating ziplines installed with double cable for extra security, measuring an average of 400 ft. long that cross stunning canyons, pristine rivers and through the trees. Also included on this tour is some amazing rappelling off an 80 ft. long waterfall, river-hiking over rocks and stair-casing up the river.

This wire rope adventure also includes a delicious homemade Puerto Rican meal in a typical countryside setting.”

Their rainforest tours are in the Carite Rainforest System in the town of Caguas just 40 minutes away from the San Juan metro area. “We call it the San Salvador Rainforest for several reasons,” explains EcoQuest president, Ivan Purcell. “The neighborhood where we park our vans and where the local family cooks for us is called San Salvador. Also we don’t want to impact the rainforest so we changed the name to keep people from finding out were we go and wandering in our trails. Finally, we found the name more appealing than Carite Rainforest.”

Overall, what sets them apart from the many other ziplines are their bilingual and friendly tour guides, certified in First Aid Training and Risk Management. Guides also receive year-around Rescue Training courses. “To my knowledge no other company offers one-of-akind zipline packages including caverappelling, canopy bridges, hiking or amphibious vehicles,” says Diaz. “We’re perhaps the only zipline in the Caribbean that lands directly in a private bar – plus kids receive a special treatment.

Some of our tours include a free ‘Been There Done That’ Certificate too.”

EcoQuest uses galvanized aircraft steel cable, for their shorter ziplines; for 600 feet and under they use 3/8 x19 thickness cable and for ziplines over 700 feet the company uses 1/2 x 19 inch thick cables. “We use a double cable and pulley system and all of our ziplines have a manual break system operated by our certified guides,” adds Purcell. “Also before every tour we have a 15 minute safety, equipment chat and a ‘how-to zipline demonstration. This way all of our clients feel comfortable and know what to expect during the tour.” WRN

Wire Rope a Later Step in Evolution of Marine Lifesaving and Salvage Efforts

by Peter Hildebrandt

Massachusetts may have been the first place to organize rescue efforts along coastlines with their Massachusetts Humane Society founding. That effort began to organize at least the availability of equipment for lifesaving.

Artists rendering of the RMS Olympic, Titanic’s sister-ship, colliding with Nantucket Lightship.

I

n the early years of whaling, cannons shot out hemp rope to harpoon hapless whales to supply the demands of a growing population needing ever more whale oil for lamps and soap making. Linen rope was also used; this may have been lighter in the water, more water repellent. Today lifesaving and salvage efforts use stronger more durable materials such

All photos and artwork courtesy of Shipwreck and Lifesaving Museum, Egan Maritime Institute, Nantucket, MA.

34

as steel wire rope.

In rescue efforts, lines would be shot out to a struggling ship some 500 yards. “The challenge was keeping the lines from getting tangled,” explains Dick Mack with the Shipwreck and Lifesaving Museum, Egan Institute on Nantucket Island, Massachusetts.

“Woven ropes in the early years could be very strong, even used to tow other ships. The hemp and linen ropes were referred to as ‘cable’ in the 19th century but by today’s standards and defini-

Wire Rope News & Sling Technology August 2014

tions it would be called rope. Much of the rope used was constructed from linen. But even rope consistently used to anchor ships was made of hemp. Some of the larger ships even had cast iron chains for various functions.”

Nantucket, 30 miles off the coast of the Massachusetts mainland is home to over 700 shipwrecks on the many shoals surrounding the island. The island was dry land some 12,000 years ago, so melting of the huge continental continued on page 36

5820 SUSQEHANNA TRAIL TURBOTVILLE, PA 109 BALBOA DRIVE BROUSSARD, LA www.MuncyIndustries.com

(570) 649-5188

continued from page 34 ice sheet caused the sea level to rise 300 feet at the end of the Ice Age. As a result of all the shoals, shipwrecks occurred not far off the shore of what is basically one of the few true ocean islands off the coast of North America.

“Something called a faking box was used to keep the hemp or linen rope from tangling,” adds Mack. “The term faking means to coil line. When the struggling ship was reached, the top of box would be lifted off and the rope would be ready and tangle free just before being shot out to the ship. Five hundred yards of rope wouldn’t be unusual a distance to shoot a line out to a struggling ship.

When a ship was needing a rescue, two lines would be run out to the vessel; the top one was a continuous line to ship supplies from the doomed ship. A ship mast was set up on the beach to simulate a mast actually on a ship as time is of the essence during rescue operations.

Practice drills using this beach ship mast took place once a week. A number of different methods were tried until the one which could reach out at least 500 yards was developed.”

Though Mack was working in electronics for the Coast Guard at Woods Hole when the ill-fated Andrea Doria sank off Nantucket, not long after that sinking he served for 45 days on the Nantucket Light Ship, something of a floating lighthouse at sea. When the Stockholm struck the Andre Doria on the night of July 25, 1956, the latter took 11 hours to sink. “There wasn’t a big enough tugboat on the scene to tow

Equipment for lifesaving set up on the beach.

the ship to a safe harbor,” says Mack.

“Now the wreck is disintegrating fast; there is not much of a structure to bring up.

“When the ship sank it capsized due to its instability. The ship’s fuel tanks were empty and they were supposed to be filled with ballast. That wasn’t done.

The design of the ship itself was unstable. It relied on full fuel tanks down below and by the time the ship had almost reached New York Harbor the fuel tanks were empty but hadn’t been filled. The ship had rolled 28 degrees at another time when its fuel tanks were not full so the vessel was something of a disaster waiting to happen.”

The two ships spotted each other on their radar, 17 miles apart. The Italian cruise liner was in fog and the

Here is the SS. Stephano during WWI. The ship was torpedoed by a U Boat two miles off the coast of Nantucket and everyone was saved.

36

Wire Rope News & Sling Technology August 2014

Stockholm was not; they were coming together at a combined speed of some 40 knots. If they’d stayed on the same track they would have safely passed each other within eight tenths of a mile of each other. “The correct method in a ship passage is to pass port to port,” says Mack. “Doria’s captain for some reason chose to do starboard to starboard. Stockholm’s captain did the opposite and they hit.

“Sixteen divers have gone down to get souvenirs and a number of them died.

In 1981 the ship’s safe was brought up full of Italian and American currency; each bill is worth more as souvenir.

The ship rests in 250 feet of water where it is dark, cold and has a swiftflowing current.”

There are some times when no matter how much cable, wire rope, hemp or linen rope or chains are available, the rescue or salvage simply is not possible.

Another sinking pre-dating the Andrea Doria by some 25 years was that of the Nantucket Light Ship, LV-117, a steelhulled vessel with steel deckhouse fore and aft, funnel amidships for engine exhaust, and a pair of masts. An electric lantern topped each mast, and an electric foghorn was on the mainmast.

Ironically, a vessel designed and bravely manned with individuals attempting to save lives at sea and prevent the need for rescues, itself fell victim to terrible disaster. The ship was stationed south of the Nantucket Shoals in a location 42 miles south by east from Sankaty Head Lighthouse on Nantucket Island.

The light ship was considered state of the art at that time, much preferable to the sailing vessels which had stood watch some 70 years prior to its continued on page 38

Take The Wire Out Of Your Wire Rope Safer, Lighter & Stronger

NEW Ocean 5000 This is the next generation of high-tensile strength synthetic fiber rope. Safer, lighter and stronger than steel wire rope, it features advanced STS heat-set technology to create an incredibly strong 12 strand DyneemaÂŽ with almost no constructional elongation.

Ideal for numerous industrial applications, Ocean 5000 is easy to work with and can be spliced in the field.

Feel the Difference

email: tech@ronstan.us for a FREE 10’ sample of 6mm Ocean 5000

Contact: Ronstan | 401-293-0539 ext 110 | tech@ronstan.us

Ronstan is the exclusive North American Distributor of Ocean 5000 and the full range of FSE Robline cordage.

continued from page 36 launching. The Nantucket Light ship was moored in 30 fathoms, about 180 feet with two inch diameter steel chain cables which in turn were attached to two 7,000 pounds anchors.

On February 8, 1931, LV-117 took aboard the eight-man crew of the fishing schooner Aloma, which had sank just 5 miles from the lightship. The men were taken ashore by the Coast Guard on February 9.

During a storm on June 27, 1933, the lightship broke her mooring chain and drifted away from her position.

She was unable to regain it for several days. Not until the gales subsided on June 30, was her crew able to return LV-117 to her station.

On January 6, 1934, four months before LV-117 was sunk by the Olympic, the lightship had a less serious glancing collision by the SS Washington, at the time the largest ocean liner yet built in the United States. The radio antenna yard were carried away and minor damage occurred to some hull plates. In April, 1934, radio operator John Parry told friends, “Some day we are just going to get it head on, and that will be the finish. One of those big liners will just ride through us.”

During the night of May 14, 1934 Olympic, Titanic’s sister-ship honed in on the lightship’s radio beacons. Some 75 times larger than the 630-ton lightship, the White Star liner was steaming at about 20 knots in the center of the western terminus of the shipping lanes of trans-Atlantic travel. By 5:00 am on the morning of May 15, Olympic was in thick fog which made the vessel reduce its speed to 16 knots.

The lightship’s radio signal and fog signals were picked up by Olympic at about 10:55 am and appeared to be off the ship’s starboard bow. Captain John Binks ordered Olympic’s course to be changed 10 degrees to port and reduced speed to ten knots.

The ship’s radio operator attempted in vain to make contact with LV-117 to determine her actual position, but the fog signals could still be heard, apparently at a longer distance off the starboard bow. It appeared that Olympic was well clear of the lightship. Then the lookout spotted LV-117 dead ahead.

Binks ordered the ship’s rudder to be set full to port, the engines to be set full speed astern, and the watertight doors to be closed throughout the vessel. Olympic slowed to only about three knots – too late. The collision happened

Rescue line wound up and ready to go.

at 11:06 am. Speed wasn’t what proved as deadly as sheer weight (52,000 tons when fully fueled); Olympic’s kinetic energy obliterated the smaller vessel.

Olympic’s passengers barely noticed the collision, which First Class passenger Sir Arthur Steel-Maitland felt only as a “slight jar”. The changed settings of the engines were much more detectcontinued on page 40

Do you have news that belongs in this publication

?

Have you promoted someone in your company?

Made a major acquisition?

Received an award for an achievement?

Do you have a product or service you would like to introduce to our industry?

If you tell us about it, we’d be very happy to consider it for publication.

It’s free!

All it will cost you is the time it takes to write it up and send it to us.

You might be surprised what a little publicity can do for your business.

Send your news to:

Email: info@wireropenews.com • P.O. Box 871, Clark, NJ 07066 38

Wire Rope News & Sling Technology August 2014

continued from page 38 able, sending vibrations throughout the ship as they were put into reverse and brought up to maximum revolutions. Passengers came onto the deck to find out what was going on and were met by the smell of oil and the sight of debris in the sea around Olympic.

“We saw the Olympic loom out of the fog a short distance away,” explained C.E. Mosher, LV-117’s first mate, in a newspaper interview two months after the accident. “The visibility was only 500 feet. A crash was inevitable.

I sounded the collision alarm. We all donned life preservers. Then we waited.

“When the collision came, it was more like a hard push and a terrific shaking, a crunching and grinding. It was not a loud smash as one might expect. The Olympic kept coming through ...”John Perry told the press, “At the time of the smash I was in the radio cabin. I barely had time to get on deck and swim for my life.” Robert Laurent commented that as “it all happened so quickly, you had no chance to panic. We all had our life preservers and it was a good thing that we did.”

Olympic responded extremely rapidly to the accident. The portside emergency lifeboat had already been

40

Shipwreck off Nantucket.

swung outboard and was lowered just before Olympic came to a halt.

The starboard emergency boat was launched a few minutes later, along with one of Olympic’s motor boats.

The scene was described by a contemporary newspaper account: “Nosing through the dense pall of the

Wire Rope News & Sling Technology August 2014

fog, the boats searched the area for almost two hours, while those on board the liner prayed for their success. A hatch drifted past, bearing the figure of an unconscious man. Shouts from the liner directed one of the lifeboats to the rescue. The same boat picked up a swimmer not far away, and the floating body of a man who appeared to be dead went past.

The lifeboats disappeared from sight in the murk and the watchers from the liner waited breathlessly. A red buoy bearing the name ‘Nantucket’ floated by, informing most of the passengers for the first time what they had struck.

After three-quarters-of-an-hour the starboard lifeboat came into view. As those who eagerly lined the rails saw that it contained only one figure aside from those at the oars, and that [figure was] motionless, they groaned. But a minute later the port boat appeared with five or six men in the blue ‘monkey suits’ of the Lighthouse Service.

Two of those also appeared to be lifeless. One man in civilian clothes, Captain Braithwaite, sat stiff and upright ... a cut on his head bled profusely ...”

The three boats managed to rescue seven of the lightship’s eleven crewmen and brought them aboard, but three of the seven died in Olympic’s hospital.

Captain Braithwaite, First Mate C.E. Mosher, Radio Operator John Perry and Oiler Laurent Robert all survived the disaster. Engineer William Perry, Oiler Justin Richmond, Cook Alfred Montero, First Cook I. Pinna, Seaman E.B. George, Seaman John Fortes and Seaman John Rodriques did not surcontinued on page 44

Problem Solved W I R E

R O P E

L U B R I C AT I O N

Problem: Manual lubrication of wire ropes with drip, brush or spray systems is slow, labor-intensive and messy, leading to problems with efficiency, safety and the environment.

Solution: Eliminate these problems and increase the reliability and longevity of your wire rope by using the Viper Wire Rope Lubricator and LE’s high-performance Wirelife® lubricants.

All-inclusive kit makes it easy

The Viper ensures fast, efficient, thorough lubrication by forcing lubricant under high pressure right through to the core of the wire rope.

Ideal for cranes & other wire rope applications

Warranty doubles with use of LE grease

Go to www.LElubricants.com/viper-wire-rope-lubricator.html to find out more about the Viper Wire Rope Lubricator and LE’s Wirelife Almasol Coating Grease (available in NLGI 00 and 0 grades). An extremely tacky and water-resistant grease with exceptional penetrating ability, Wirelife Almasol provides EP protection and exceptional corrosion protection, even in underwater applications.

www.LElubricants.com • 800-537-7683 • info@LE-inc.com The Lubrication Reliability Source™

300 Bailey Avenue • Fort Worth, TX 76107 • Fax: 800-228-1142 LE operates under an ISO 9001 Certified Quality System.

continued from page 40 vive the sinking. The lightship had sunk so rapidly that anyone beneath the decks had only a small possibility of surviving.

Binks ordered Olympic to resume course for New York at 12:29 pm once it had become clear that there were no more survivors. The liner had suffered only minimal damage in the collision, comprising some dented hull plates which were repaired in a dry dock in Southampton in May–June 1934. She was allowed to leave New York at the

scheduled time on May 17 after a brief inspection. The dependents of those killed in the accident were given restitution through the United States Employees’s Compensation Act. LV-117 was replaced by the LV-112.

The Cunard–White Star Line paid for the construction of LV-112 as reparation for the accident.

The lightship now rests about 200 ft (61 m) deep, lying on her port side in an area with unpredictable currents up to 3 kn (5.6 km/h; 3.5 mph). The wreck of the vessel is remarkably intact; LV-

C. SHERMAN JOHNSON CO. INC.

ARCHITECTURAL HARDWARE are you considering entering the lucrative architectural cable railing market? Johnson architectural Hardware is your source for the highest quality stainless cable rail fittings.

High quality Cable Fittings, made in the USa, have been our specialty for over 50 years. Johnson does not make cable assemblies — we refer jobs to you!

Give us a call today to find out how we can make your business more profitable by providing wire rope Cable railings to the commercial and home construction trade.

Full line of electro-mechanical and hydraulics swagers.

Cable Railing Fittings • Full-stRength Rigging Fittings Full CustomeR suppoRt • Field installable and swage Fittings • s/s tuRnbuCkles FoR most any appliCation MADE MADE IN IN USA USA all 316 stainless • 1 x 19 stRand Cable by the spool

Great View?

Don’t Block It!

terminal tuners™

MADE IN

MADE MADE IN IN

USA MADE IN USA

Stainless turnbuckles

Learn more at www.csjohnson.com c. SHERMAn JoHnSon co., Inc. East Haddam, Connecticut, USA • 1 . 8 0 0 . 8 7 4 . 7 4 5 5 44

Wire Rope News & Sling Technology August 2014

117’s aft mast lies alongside the hull of the ship, while the forward mast has been broken off, lying perpendicular to the wreck.

It was discovered in the 1970s by Captain Paul Forsberg of the Viking Fleet fishing concern, though it was not clear at the time that the wreck was that of LV-117. Its identification was not confirmed until as late as July 1998 when an expedition led by diver Eric Takakjian made the first of what would be many visits to the wreck site.

It is reported to be a difficult and dangerous dive, as the wreck is entangled in many fishing nets. Nonetheless Takakjian describes it as “fascinating” and “a really exciting and rewarding experience” to visit. He was surprised to find how well-preserved it was, as it had been rumored at the time that the lightship had been cut in half by Olympic.

Now, in the next century, despite the latest electronic, computerized, satellite or cell phone technology as well as countless apps for those phones, shipwrecks, capsizings and rescues as well as salvages still occur, no matter how challenging they’ve become over the decades. They are more complicated and involve much larger equipment, but simple human error and lack of common sense may at times be as big a factor in their occurring.

Resolve Marine Group’s Joe Farrell, founder and CEO feels that it’s an anomaly captains are not required to receive ongoing training considering how many cruise ships are out on the seas today. Resolve Marine Group is headquartered in Fort Lauderdale, Florida.

Airline personnel has regular updates of training. “But for ship captains, no,” explains Farrell. “Some cruise companies are proactive and take advantage of the ship control simulator we’ve constructed in order to help train captains and keep cruise liners safer.”

The container ship MV Rena first ran aground and then sank off the coast of northern New Zealand. Though the media focused mainly on the oil spill off the coast of Tauranga in New Zealand, and the environmental damage associated with the wreck, the salvage operations of the vessel proved extremely challenging too. Resolve Marine Group handled the complicated work of bringing the remains of the ship to the surface. The ensuing spill when the grounding first happened gained the title of New Zealand’s worst maritime environmental disaster to date.

On October 5, 2011, Rena grounded continued on page 46

Introducing the newest mighty warriors of the trade

KOREAN HARDWARE

Elite Sales, America’s largest importer and wholesale distributor of wire rope, cable, chain and hardware, is proud to introduce Viking, its newest, strikingly bold product line. It features shackles, thimbles, sockets, clips, hooks, turnbuckles, rings and more.

Choose the experts and benefit from: • • • • • • • • • •

Very competitive prices certified product line Readily available inventory Sizes ¼” – 4” Made in Korea Quality forging and machining Worldwide acceptance Warehouse locations in Houston, TX and Tampa, FL Same day shipping Coast to coast deliveries

TAMPA WAREHOUSE 603 N. 19 Street Tampa, FL 33605 P. 813.247.2094 F. 813.248.2821 HOUSTON WAREHOUSE 6247 Navigation Boulevard Houston, TX 77011 P. 713.861.4203 F. 713.861.4280 EXECUTIVE OFFICE 9445 S.W. 40 Street, Second Floor Miami, FL 33165 P. 305.262.3105 F. 305.262.3859

NEXT DAY DELIVERY • 1-800-458-6659 • www.elitesalesinc.com

continued from page 44 on the Astrolabe Reef. The ship carried 1,368 containers, eight of which contained hazardous materials, as well as 1,700 tons of heavy fuel oil and 200 tons of marine diesel oil. At the start the ship listed 11 degrees to port, with the front stuck on the reef. But by October 9th an oil slick over three miles long endangered wildlife and the area’s rich fishing waters.

Oil from Rena began washing ashore at Mount Maunganui Beach on October 10, 2011. Strong winds and bad weather on the night of October 11, 2011 caused the ship to list over to starboard 19 degrees; this resulted in between 30 and 70 containers being washed overboard. None of the containers contained hazardous cargo.

Containers subsequently began washing ashore on Motiti Island.

On October 12, 2011, aerial footage showed a large crack in the hull of Rena, increasing fears that the ship 913_7x4.8750.pdf could break in two and sink. It also showed a container floating in the water surrounded by smoke, suggesting that a chemical reaction was occurring.

After October, salvage efforts were focused on removing the ship’s cargo before it completely broke apart and

on January 2012, the Rena totally broke in half and the stern slipped off of the reef and began sinking. A small amount of oil and containers escaped the ship as it broke in half. After the Costa Concordia wreck, the salvage of of the Rena, at $350 million has been the world’s most costly to date.

A salvage company named Svitzer was hired to assess the safety of coming salvage teams on the ship, and to continue to carry out salvage procedures. Matthew Watson, a spokesman for Svitzer, described the key tasks carried out by the salvage teams to be removal of oil off of the ship (specifically through a transferring process) and the collection of released containers and other waste. Salvage teams were helicoptered onto the ship, as that was advised as the safest way.

Containers and the ship itself were cut up – and for the first time in history – removed by helicopters using wire rope. Cutting the wreckage up took place at depths of up to 50 meters or 164 feet.

The 700 ton, 25 meter high accommodation block removal remained a challenge. Just two huge hooks each lifted 350 tons out of the water. But then as the house was lifted up out of the wa-

ters, the port side wire rope cables became dangerously twisted. The house was then lowered back into the water and the untwisting was done.

After six months of extended diving operations, Resolve’s team successfully cut and lifted the upper decks of Rena’s accommodation block. But once removed and up above the water’s surface, the chains cut through the soft section of metal, metal which had softened while under water. Since this also positioned the ship’s house too low to be placed on the barge, Resolve’s crew then actually returned the 350 ton house back on the seabed.

Then, finally, after inclement weather had passed another attempt was made. Resolve Marine Group’s huge marine crane lifted the house up out of the water in June, 2014. A combination of huge chains and thick wire rope as well as the resolve of workers unwilling to give up, at last got the Rena’s house up on the deck of the barge. Though Trim size 7x4. the materials may have changed – wire rope, huge chains and synthetic rope instead of hemp and linen ropes – the satisfaction of saving a sunken vessel or the crew of a doomed ship still brings wide smiles to workers involved in such rigorous attempts to this day. WRN

Im•prove \im-'prüv\ verb - to enhance in value or quality : make better with the new

Barrier Lifting Grab.

Compact and rugged design Lifts 6" - 12" concrete barriers 8,500 and 14,500 lbs. capacitites Adjustable ergonomic handles Stainless steel Auto-Latch Locating assembly and center guide Easy attach lifting eye Replaceable polyurethane pads Complies with ASME standards

The Caldwell Group 46

5055 26th Ave. Rockford, IL 61109

Wire Rope News & Sling Technology August 2014

800.628.4263

caldwellinc.com

Preliminary steel imports decrease 11% in June

Import market share 27% in June Based on preliminary Census Bureau data, the American Iron and Steel Institute (AISI) reported that the U.S. imported a total of 3,586,000 net tons (NT) of steel in June, including 2,706,000 net tons (NT) of finished steel (down 11.1% and 8.0%, respectively, vs. May final data). Year-to-date (YTD) total and finished steel imports are 21,082,000 and 15,552,000 net tons (NT), respectively, up 34% and 26% respectively, vs. 2013. Annualized total and finished steel imports in 2014 would be 42.2 and 31.1 million NT, up 31% and 25% respectively vs. 2013.

Finished steel import market share was an estimated 27% in June and is estimated at 27% YTD. Key finished steel products with a significant import increase in June compared to May are cold rolled sheets (up 26%), cut lengths plates (up 26%) and tin plate (up 14%). Major products with significant YTD import increases vs. the same period last year include wire rods (up 100%), plates in coils (up 69%), cold rolled sheets (up 67%), sheets and strip galvanized hot dipped (up 51%), sheets and strip all other metallic coatings (up 48%), hot rolled sheets (42%), cut lengths plates (up 37%), mechanical tubing (34%), oil country goods (up 28%), heavy structural shapes (up 25%), reinforcing bars (up 15%) and tin plate (up 15%).

In June, the largest volumes of finished steel imports from offshore were all from Asia and Europe. They were from South Korea (457,000 NT, down 22% vs. May final), China (230,000 NT, down 25%), Turkey (189,000 NT, up 25%), Japan (138,000 NT, down 5%) and Germany (102,000 NT, down 3%). For six months of 2014, the largest offshore suppliers were South Korea (2,609,000 NT, up 49%), China (1,518,000 NT, up 69%), Japan (990,000 NT, up 3%), Turkey (951,000 NT, up 29%) and Russia (596,000 NT, up 344%). Below are charts on estimated steel import market share in recent months and on finished steel imports from offshore by country.

AISI releases 2013 Annual Statistical Report

The American Iron and Steel Institute (AISI) announced the release of its 2013 Annual Statistical Report (ASR). The 2013 ASR shows that U.S.

Source: U.S. Dept. of Commerce, Bureau of Census. steel production, shipments, imports and exports all decreased in 2013 vs.

2012, as U.S. steel markets remained below pre-recession levels. U.S. steel shipments were at 95 million net tons, a one percent decrease from the previous year and an 11 percent increase from the most recent five-year average of 86 million net tons. U. S. Raw Steel Production was 96 million net tons in 2013, a two percent decrease over 2012. Construction and automotive continue to be the largest markets for steel.

The most comprehensive reference of its kind for the American steel industry, the AISI report provides statistical data for the U.S. steel industry and a variety of selected statistical data on the Canadian, Mexican and world steel industries. It features extensive charts and graphs, including: selected statistical highlights on shipments, apparent supply, imports, employment and raw steel data over a 10-year period; selected financial highlights on income and cash flow data; shipments by products and markets over a 10-year period; raw

steel production (state distribution and capability utilization); and imports and exports data. The report also includes an executive summary that highlights recent and historical trends in the North American steel industry.

Thomas J. Gibson, president and CEO of AISI, said “The Annual Statistical Report is an essential tool for industry, media, analysts and anyone else interested in robust and wide-ranging data on the steel industry. With over 16 pages of charts and graphs in the executive summary alone, it serves as an essential reference for anyone following steel data and trends.�

To purchase the 2013 Annual Statistical Report visit the Platts Steel Data and Analysis website: www.platts.com/ products/steel-data-analysis or call 412-431-4370.

May steel shipments up 2 percent from April, up 4.4 percent from prior year

The American Iron and Steel Institute (AISI) reported that for the continued on next page

Wire Rope News & Sling Technology August 2014

47

continued from previous page month of May 2014, U.S. steel mills shipped 8,398,976 net tons, a 2.0 percent increase from the 8,235,096 net tons shipped in the previous month, April 2014, and a 4.4 percent increase from the 8,047,245 net tons shipped in May 2013. Shipments year-to-date in 2014 are 40,485,323 net tons, a 2.2 percent increase vs. 2013 shipments of 39,595,155 net tons for five months.

A comparison of May shipments to the previous month of April shows the following changes: cold rolled sheet, up 2.0 percent, hot dipped galvanized sheets and strip, down 1.0 percent and hot rolled sheet, down 3.0 percent.

AISI releases June SIMA imports data, import market share 28 percent in June

Based on the Commerce Department’s most recent Steel Import Monitoring and Analysis (SIMA) data, the American Iron and Steel Institute (AISI) reported that steel import permit applications for the month of June total 3,436,000 net tons (NT)*. This was a 16% decrease from the 4,106,000 permit tons recorded in May and a 14% decrease from the May preliminary imports total of 4,016,000 NT.

Import permit tonnage for finished steel in June was 2,764,000, down 6% from the preliminary imports total of 2,925,000 in May. For the first six months of 2014 (including June SIMA and May preliminary), total and finished steel imports were 20,915,000 NT and 15,593,000 NT, respectively, up 33% and 26% from the same period in 2013. The estimated finished steel import market share in June was 28% and is 27% year-to-date (YTD).

Finished steel imports with large increases in June permits vs. the May preliminary included cut lengths plates (up 26%), cold rolled sheets (up 20%), tin plate (up 12%) and hot rolled sheets (up 11%). Products with significant year-to-date (YTD) increases vs. the same period in 2013 include wire rods (up 103%), plates in coils (up 67%), cold rolled sheets (up 66%), sheets and strip hot dipped galvanized (up 50%), sheets and strip all other metallic coatings (up 49%), hot rolled sheets (up 43%), cut lengths plates (up 37%), mechanical tubing (up 35%), oil country goods (up 30%), heavy structural shapes (up 25%), structural pipe and tubing (up 21%) and reinforcing bar (up 16%).

In June, the largest finished steel import permit applications for off-

SLINGUARD PROTECTORS “Clutch Action” “The Only Proven Protection For Your Products and Slings” Extends Sling Life - Reduces cost

Sleeves, Wraps, Pads & Blankets Available From:

THE VERNON CORPORATION P.O. Box 246 • 400 N. Yankeetown Road Boonville, Indiana 47601

(800) 897-5584 48

Wire Rope News & Sling Technology August 2014

shore countries were for South Korea (498,000 NT, down 15% from May preliminary), Turkey (246,000 NT, up 66%), China (234,000 NT, down 23%), Japan (151,000 NT, up 4%), and Russia (103,000 NT, down 0.3%). Through the first six months of 2014, the largest offshore suppliers were South Korea (2,650,000 NT, up 51% from the same period in 2013), China (1,520,000 NT, up 69%), and Turkey (1,007,000 NT, up 36%). * Monthly permit numbers provided to date may be understated, as entry documentation with the required import license number may be submitted up to ten days after imports have entered U.S. commerce.

Steel Institute and others urge Kerry to move on Keystone

The American Iron and Steel Institute (AISI) and more than 40 other associations are urging the State Department to move ahead toward completion of the Keystone XL pipeline. In a letter to Secretary of State John Kerry, in whose jurisdiction the pipeline evaluation process lies, the groups state that the Department earlier this year found that over 42,000 jobs would be created and $3.4 billion in additional revenue to GDP would result in the building of the pipeline. The letter also stated that “more than 70 percent of Americans support the building of the project, yet we continue to wait.”

Thomas J. Gibson, president and CEO of AISI, said, “Steel products play a valuable role in the Keystone XL pipeline. Steel pipe and tube products form the essential infrastructure for producing oil and gas natural resources, transmitting them to processors, then eventually getting them to final customers. Pipelines have long been recognized as one of the safest, most reliable and well-regulated ways to move crude oil and petroleum products. The Keystone XL pipeline will be built to the most advanced specifications and will be monitored and maintained by state-of-the-art technologies.

It is time to move ahead and put the steel to work.”

The joint letter concluded that, “The Keystone XL Pipeline has been studied longer than any pipeline project in U.S. history. Since the initial permit application was filed in 2008, more than 10,000 miles of oil and natural gas pipeline have been built in the U.S.; this is enough pipe to cross our country nearly four times. However, after nearly six years of studies showing no significant impacts – yet positive benefits to our energy and economic security – politics are still trumping good policy.”

Harrington Hoists, Inc. is pleased to announce Approved Training for ETCP Renewal Credits

Harrington’s most recent addition to their training courses is an ETCP (Entertainment Technician Certification Program) recognized training program on their TNER Theatrical Electric Chain Hoists. The program consists of an eight hour inspection and repair training course intended for ETCP certified riggers and electricians.

This course covers inspection, repair, maintenance, and troubleshooting our TNER hoists.

The course includes how to read and interpret wiring diagrams and troubleshooting electrical problems in the hoist control and motor circuits. Instruction is provided on performing a proper inspection of hoist components per the ASME B30.16 and PLASA / ANSI E1.6-2-2013 standards, as well as maintenance and repair. The course includes hands on exercises to reinforce the program content.

Attendees will be tested on the material and those that successfully pass the written exams, and perform acceptably in the lab experiences, will be given a certificate of achievement and

supplier of electric and air powered chain hoists and trolleys, electric wire rope hoists and trolleys, lever hoists, manual hand chain hoists, push and geared trolleys, overhead cranes, crane accessories and a full line of replacement parts.

WIRE & CABLE INDIA 2014: Ideal platform to enter growing market

ETCP certified technicians will earn 8 renewal credits.

Harrington’s 2014 training dates are scheduled for August 5th, October 22nd and November 19th. Contact Harrington Hoists, Inc. at 800-233-3010 for more details on our new approved training for ETCP renewal credits.

Harrington Hoists, Inc. is a Kito Group Company located in Manheim, PA and Corona, CA. and is a leading

The next staging of WIRE & CABLE INDIA, 5th International Exhibition for the Wire and Cable Industry, will take place from October 28 - 30, 2014 at the Bombay Convention & Exhibition Center in Mumbai. WIRE & CABLE INDIA 2014 will be jointly organized

by Messe Düsseldorf and its subsidiary Messe Düsseldorf India, with the support of International Wire and Cable Exhibitors’ Association (IWCEA), the International Wire & Machinery Association (IWMA), the Italian Wire Machinery Manufacturers’ Association (ACIMAF), the Wire and Cable Industry Suppliers’ Association (WCISA) and the Steel Wire Manufacturers Association of India (SWMAI).

The exhibitors at WIRE & CABLE continued on next page

Order TodayAvailable Immediately!

310.448.5444 sales@awrrinc.com

Exclusive North American Distributors

310.522.9698 sales@waterman supply.com

Wide Body & Safety Shackles, Eye Hooks, Master Links

Wire Rope News & Sling Technology August 2014

49

continued from previous page INDIA 2014 will present the latest advancements in wire manufacturing and finishing machinery, process technology tools, auxiliary process technology materials, special wires, cables and materials as well as measuring and control technology. The visitor target groups are decision makers from the wire, cable and spring sector, from the iron, steel and non-ferrous industry as well as from the automotive, aerospace, electrical engineering, telecommunication, computer, chemical and construction industry.

WIRE & CABLE INDIA 2014 will be held at an opportune time. The main customers for the wire and cable industry are the automotive, telecommunication and construction industries. In the past few years, these sectors have experienced a rapid expansion in India, with an annual growth of about 25%. For major infrastructure projects, the Indian government has begun to focus primarily on public private partnerships. With an investment need of about $450 billion, these infrastructure projects are the driving growth factor for the construction industry, especially in the transportation sector. Accord-

ing to the Automotive Mission Plan 2006-2016, the Indian government is geared up to double the automotive industry’s contribution to the country’s GDP by 2016 and furthermore intends to create 25 million new jobs in the industry. The telecommunications market in India is the third largest in the world and the fastest growing, particularly in the wireless and telephone sectors. Concerning the Internet sector, the government plans to provide the rural regions of India with broadband connections.

With 291 exhibitors from 25 countries on 59,800 square feet of net exhibit space, the last staging of WIRE & CABLE INDIA in 2012 was the largest ever. The event featured country group exhibits from Austria, China, France, Germany, Italy and the U.S. WIRE & CABLE INDIA 2014 will be held concurrently with three thematically related trade shows: Tube India 2014 (6th All-Indian Exhibition and Conference for the Tube and Pipe Industries), Metallurgy India 2014 (5th International Exhibition & Conference on Metallurgical Technology, Material Handling and Services) and Welding & Cutting India 2014. Tube India and Metallurgy India will also be organized

by Messe Düsseldorf and its Indian subsidiary while Welding& Cutting India is an event of Messe Essen.

For further information on visiting or exhibiting at WIRE & CABLE INDIA, Tube India or Metallurgy India 2014, contact Messe Düsseldorf North America, 150 North Michigan Avenue, Suite 2920, Chicago, IL 60601. Telephone: (312) 781-5180; Fax: (312) 781-5188; Email: info@mdna.com; Visit our web site www.mdna.com; Subscribe to our blog at http://blog.mdna.com; Follow us on twitter at twitter.com/WireTube_MDNA.

New website for Crosby

Crosby is pleased to announce the release of their newly redesigned website. In an effort to serve customers more efficiently, Crosby has added more functionality and improvements to the site. Search for product has been simplified through new product/industry selectors and global site search. For convenience, the many resources and tools designed to assist customers in their various planning activities can not only be found in the main navigation of the site, but also with the product to which they specifically pertain.

CAD data, one of these many resources, has a simplified sign up process and

IN STOCK

Turbotville, PA & Lafayette, LA

INDUSTRIES

Slip-Through & Casing Thimbles • Specially designed for braided slings.

• Ears can be peened over to retain wire rope.

• Designed to resist elongation from loading.

• Can come cut to bend around a master link.

• Traceable

Inspiring Confidence.

5820 Susquhanna Trail, Turbotville, PA 109 Balboa Drive, Broussard, LA 50

Wire Rope News & Sling Technology August 2014

570-649-5188 MuncyIndustries.com

3D drawings are now offered in addition to 2D. A Career Center has also been established to reach out to potential employees and interns.

In addition, the new website has a responsive design to support most mobile device viewing and now combines all Crosby sites into one global site.

To explore these exciting additions and improvements to their website, visit them at www.thecrosbygroup. com. Questions or comments, call (800) 797-4611.

short drive from Gig Harbor. Quality is of paramount importance in every part of production. Proof load testing can be performed locally and is available on a case-by-case basis. Associates are available to assist with engineering services for unique applications or modifications. Sea Catch is computer generated and can be easily modified to suit most user’s needs.

Sea Catch began as a primitive set net release in Cook Inlet, Alaska and then as a skiff release for purse seiners in Prince William Sound. From there it found multiple release applications in various areas including sea technology, offshore hydrocarbon production/transfer, general maritime operations, drop testing, defense/military, navy/coast guard, movie special effects, and even aerospace. Over 54 dealers worldwide

are set up to facilitate the quick release needs of their customers.

“Each area of use presents different challenges”, said owner/inventor, John McMillan.

“And it is quite amazing that a simple release device has been found so useful in so many release applications. We use heat-treated, aerospacegrade stainless steel plate. The device combines unique features such as no springs, multi-directional, low friction releasing, and hitch-pin safety lock.

The key is the combination of a simple, proven toggle linkage principle - and a lot of thinking about its many jobs.

Sea Catch has come a long way from its early start 20 years ago and that is worth celebration.”

Releasing an object or line under load continued on next page

McMillan Design/Sea Catch - celebrating 20 years!

McMillan Design is celebrating 20 years of design, manufacturing and sales of the Sea Catch Toggle Release.

Since 1994, Sea Catches have gained praise from engineers and users in 14 major industries around the world.

The device is designed exclusively for the safe release of lines or objects under load and is the simplest and most innovative in-line, quick release hook design on the market today. Units sold in 1994 are still in service. Some units have exceeded 5,000 release cycles and are still in operation. Sea Catch is now available in over 68 different models with capacities ranging from .65 ton to 150 tons or larger. The standard unit is connected via common shackles at each end whereas the “LM” Series is formed with enlarged jaws to receive and release fibre line or wire rope rather than a shackle. Retrieving hooks and offload hooks have been added to the general product line in recent years.

McMillan Design is still a small, privately owned, multi-disciplinary design company located in Gig Harbor, Washington. General production takes place in Auburn, Washington, a Wire Rope News & Sling Technology August 2014

51

continued from previous page need not be a daunting task any longer!

For more information, go to their website at www.seacatch.com.

LGH’s Pittsburgh, PA warehouse relocates

Lifting Gear Hire’s (LGH) Pittsburgh, PA warehouse has relocated to a new facility. The new warehouse, located at 11 Waller Way, Burgettstown, PA, will help LGH provide faster equipment rental turn-around times for customers in and around the Pittsburgh area. In addition, the new warehouse will also provide an expansive selection of rental equipment, larger scale rental equipment choices and more dock space for convenient equipment loading and unloading.

Founded in 1990, Lifting Gear Hire (LGH) is the United States’ largest single organization devoted exclusively to the provision of lifting and moving equipment for rent and sale, according to a company release. LGH provides hoisting, pulling, jacking, rigging, material handling and safety equipment available for immediate and safe use.

LGH’s mission is to offer expertise in the rental of the safest and most reliable hoisting and rigging equipment to build and support a better America.LGH – Puts Safety First. www.lgh-usa.com.

NASA sling project by Bishop Lifting Products

Designed and fabricated by BLP Houston, this sling basket was created to secure and recover the NASA capsule pictured to the right. After being deployed into one of the outer atmospheres, it will return to earth and

land in the water. A team of NASA and Navy divers will recover the capsule to study it. This sling was specifically designed to not disrupt or impact any part of the capsule, in order to study it correctly.

Partnership and Performance are drivers of revolutionary Shoretension® mooring solution

Shoretension®, a revolutionary vessel mooring system, is helping the marine industry to address the global challenges of energy conservation, improving ships’ safety and the continuous need to reduce down-time of available terminals. The ShoreTension® system uses ropes made with Dyneema® SK78 fiber from DSM to ensure permanent tension, even in extreme conditions.

ShoreTension® is a stand-alone hydraulically controlled mooring system, designed to absorb the energy of the moving ship in a gust of wind and store this internally whilst paying out the mooring lines. When the peak loads are over, the system heaves in the lines with the energy stored, returning to its initial position.

The system does not require any external energy, thus providing an effective and sustainable mooring solution, according to a company release.

To demonstrate its reliability, the ShoreTension® system has undergone extensive tests after it was introduced to a number of end-users at various ports around the world, such as Rotter-

dam, Sines and Cotonou. These were all completed successfully.

The four-way partnership between ShoreTension BV, Hoenderop BV, Gleistein Ropes and DSM Dyneema BV provided a significant contribution to the success of the ShoreTension® vessel mooring system.

At the heart of the system are ‘MegaTwin Dyneema® HS Dyneema® SSC’ lines produced by Geo Gleistein & Sohn GmbH. Their load bearing cores are made with Dyneema® SK78 fiber from DSM, setting a new standard in the design of light, strong and stiff mooring lines.

A new “snake skin cover” was developed with Dyneema® by Gleistein Ropes to help protect the load bearing core during its use, thus mitigating the risk of premature line failure, while extending the ropes’ lifetime, saving on replacement cost and reducing environmental impact.

Gert van den Burg of ShoreTension B.V. explains: “Whereas with conventional mooring ropes, most of the tension is transferred to the ship, in the new system the tension is transferred to the ShoreTension unit, located onshore. Because of the exceptional demands of the system, mooring lines need to be durable, light and strong, with little or no stretch. Mooring lines made with Dyneema® can meet these demands given the properties of the fiber used and their proven value for mooring of VLCC’s, LNG carriers and cruise lines for many years.”

To address the unique needs of the system, Gleistein Ropes and DSM Dyneema B.V. provided a dedicated

At NASA Neutral Buoyancy Laboratory.

52

Wire Rope News & Sling Technology August 2014

lighted to be able to apply our Bright Science for projects such as these.”

Mooring ropes made with Dyneema® fiber are 7 times stronger than steel, which makes them strong enough to take the highest loads. They are lightweight yet smooth and easy to handle.

Ropes made with Dyneema® are also safer – there is no danger of backlash or snaking in the unlikely event of a rope break and they last at least twice as long as steel and other synthetic ropes.

Certified Slings and Supplies among 2014 “Best Places to Work”

principal-based system approach at the full-scale ShoreTension test facility in Vlaardingen. Gert van den Burg: “A partnership can only be successful if all participants deliver high levels of commitment, dedication and focus. Gleistein Ropes and DSM Dyneema continue to meet our expectations to the full.”

Edge Defender™

DSM Dyneema President Gerard de Reuver said: “The ShoreTension System offers exciting perspectives for the shipping industry in terms of safety and productivity. Moreover, the system also addresses the global challenges of energy conservation and pollution control, which we face as a society. At DSM we are de-

TO YOU. IT’S IT’S UPUPTO YOU.

Wellness programs (including annual mammogram service and biometrics checks), CPR training and paid birthdays off work are some of the advantages that employees of Certified Slings and Supplies enjoy, and led the company to be named among Orlando’s “Best Places to Work” in 2014 by the Orlando Business Journal.

It is the 56-year-old family-owned business’s second such honor. Certified Slings is a manufacturer and distributor of industrial rigging, overhead lifting, load securement and safety equipcontinued on next page

Sling Shield™

DO YOU WANT TO: SAVE TIME? SAVE MONEY? CREATE A SAFER WORKPLACE? Get serious about your sling protection with these two new products from Lift-All! ● Designed for quick installation. ● Keep your slings from being cut. ● Keep your loads from being dropped.

EDGE DEFENDER™

● Use on straight or curved edges ● Three plies of heavy nylon web ● Aramid thread ● Retaining straps ● Orange warning layer for easy inspection

SLING SHIELD™ Patent Pending ● For use on straight edges ● 1” radius aluminum bar ● Magnets hold SS to steel loads for easy rigging ● Retaining strap keeps sling in place while rigging ● Prevents cutting of synthetic slings!

The BEST Edge Protection for your slings!

Learn more at: www.lift-all.com 800-909-1964 Wire Rope News & Sling Technology August 2014

53

continued from previous page ment and contractor supplies.

Companies selected for “Best Places to Work” were chosen based on how workers responded to an anonymous online employee engagement survey with questions about topics that included teamwork, job satisfaction and benefits.

Survey specialists Quantum Workplace gathered the data for Orlando Business Journal and used a proprietary formula to rank companies based on employee feedback about their satisfaction with their workplace.

Certified Slings’ CEO, Douglas Worswick said that a family approach to a growing business keeps the company focused on its true assets: people.

“Our employees’ well-being means the world to us,” Worswick said. “When they’re happy and healthy, they take personal pride in their work and helps Certified Slings continue to thrive among the most respected companies in the country.”

Spider provides access for San Francisco – Oakland Bay Bridge construction

Spider, a division of SafeWorks, LLC,

provided powered access throughout the eight year construction of the new self-anchor suspension span of the San Francisco – Oakland Bay Bridge in California.

American Bridge/Fluor Joint Venture, the general contractor for this massive bridge project, turned to Spider in 2008 for a variety of swing stages, work baskets and hoists. Over the past six years, they purchased and rented standard Spider equipment to enable their workers to access the bridge’s cables, underside of its roadway deck, and its 525 ft tall tower.

Spider’s experienced engineers also designed a custom platform to reach around the exterior of the tower shaft.

The equipments’ light weight and easy connections enabled American Bridge/ Fluor Joint Venture to change the platform’s length as needed to gain better access to the sloping tower face while maximizing the working space on the platforms to maintain productivity.

Spider fall protection equipment including harnesses, safety lines, rope grabs and lanyards was also implemented on-site.

In order to ensure safe, productive equipment operation, Spider’s San Francisco-based team provided both

Competent Person Training and onsite User Training to American Bridge/ Fluor Joint Venture. This significantly contributed to six years without any suspended access mishaps or incidents.

“The Bay Bridge project provided many opportunities to think outside the box to get the job done,” commented Levi Gatsos, Design Engineer with American Bridge/Fluor Joint Venture.

“Spider’s engineers and local support team rose to every challenge. All in all, their responsiveness to our needs and our experience with their equipment have been excellent.”

Additionally, Spider equipment has also been used by painting and elevator contractors during this bridge construction.

To learn more about Spider’s bridge access expertise download our brochure at www.spiderstaging.com.

SC&RA Crane & Rigging Workshop scheduled for Sept. 24-26 in Dallas

More than 450 attendees from around the world are expected at the Crane & Rigging Workshop to be held by the Specialized Carriers & Rigging Association (SC&RA), Sept. 24-26, at the Sheraton Dallas Hotel, Dallas, Texas. Some of the industry’s top professionals will present educational sessions during the annual workshop, including, in order of schedule: Getting Beyond Great! How to Achieve Extraordinary Results! – Joe Contrera, ALIVE @ WORK LLC, will examine why some people (and companies) get stuck being average, how you 54

Wire Rope News & Sling Technology August 2014

was cut off from the outside

continued on page 16

or ri pe su

X

e ad Gr 0 0 1

L

TH

IE L

®

by

E

K8 G

E,

TH

IEL

E

Gr

by

ad

e 80

TM

eld

Hoists & Hoist Chains

P.O. Box 470487 Tulsa, OK 74147 www.kwschain.com 1-800-872-9313 sales@kwschain.com

Wire Rope be News & Slingthe Technology August 2006 requirements, plus the key elements of and your people might creating exact opposite of the results you want, a power line safety system for mobile how to shift from current results to cranes on a jobsite.

Evaluating Sling Stability and Load ones you want and how to sustain longEquilibrium – Keith Anderson, Bechtel term change and success.

Best Practices for Wire Rope Instal- Equipment Operations, will examine a lation – Knut Buschmann, Unirope number of case studies to explain what Ltd., will cover such topics as proper makes a load instable, how to spot isshortening/cutting procedures of high sues before they become a problem, and performance wire in the field, install- how to design arrangements that are ing rope onto the drum, block twisting guaranteed to be stable.

Be Prepared for MSHA Inspections, and how to solve it, inspection criteria, common causes for rope damage, Not just OSHA – Stuart Sadler, OperASME rope discard tables, and ISO ating Training & Inspection Services LLC, will distinguish the two types of 4309 discard criteria.

The Key to Hiring the Right Lift inspections by touching on compliance Director – Joseph Collins, Becht En- issues for equipment, types of PPE regineering, Inc., will walk attendees quired, magnitude of fines, impact on through requirements outlined by future work, safety statistics, and most OSHA and ASME, as well as best prac- common citations.

Rescuing Personnel From Heights – tices for safe lifting operations. Learn what key resume attributes help a good Brent Wise, Tech Safety Lines, Inc., lift director stand out and how to lever- will present details about how site age your offer so they will not walk personnel must be prepared to quickly take responsibility for carrying out an away.

Operating Cranes around Power appropriate tower-crane rescue plan, Lines – Bill Smith, NBIS, will identify using the necessary equipment and folwork zones and how to prevent equip- lowing ANSI requirements.

2014 Rigging Jobs of the Year – Repment and personnel encroachment in these areas. He will also discuss the resentatives from Fagioli, Omega Moruse of insulated links, non-conductive gan and Barnhart will present details rigging, required signage and training of this year’s winners, including the re-

covery of the cruise ship Costa Concordia off the coast of Italy, the movement of the 87-year old Sellwood Bridge in Portland, OR, and the removal of 10 platforms on a control tower at McCarran International Airport in Las Vegas, NV. How to Effectively Utilize Hydraulic Platform Transporters in the Rigging Industry – Marco van Daal, The Works International, will focus on a case study on the Mexican Gulf, where living quarters, drill rigs, and more are being built on the shoreline to be transported later by means of a roll-on/rolloff operation onto a barge.

Advanced Rigging & Critical Lift Planning – Mike Parnell, Industrial Training International, will lead participants on a problem-solving rigging session on subjects such as sling tension plus building a lift plan for a situation that incorporates aspects such as crane setup, spreader bars, an advanced rigging arrangement, load schematics, and load travel path.

Understanding Your Company’s EMOD – Robert Moore and Christopher Nelson, NBIS, will explain how the experience rating modification factor (EMOD) is used to predict future losses continued on next page

Wire Rope News & Sling Technology August 2014

55

continued from previous page of an individual employer by analyzing its past losses and plays a role in workers’ compensation premiums. They will also show how each employee plays a role in a company’s E-MOD, both positively and negatively.

Additionally, Workshop registration will include meetings of the SC&RA Tower Crane Committee, Crane & Rigging Group’s Safety Education & Training Committee, Labor Committee, and Governing Committee; a sold out Exhibit Center featuring products and services from 84 companies, a complimentary hot buffet lunch, and a Grand Prize Drawing; and receptions, continental breakfasts, and refreshment breaks.

Visit www.scranet.org/events and click on the “Crane & Rigging Workshop” link to review the program, see who already has registered, learn more about the hotel and travel information, and register as an attendee. Or call SC&RA at (703) 698-0291 for additional information.

The Specialized Carriers and Rigging Association (SC&RA) is an international trade association of more than 1,300 members from 43 nations. Members are involved in specialized transporta-

56

tion, machinery moving and erecting, industrial maintenance, millwrighting and crane and rigging operations, manufacturing and rental. SC&RA helps members run more efficient and safer businesses by monitoring and affecting pending legislation and regulatory policies at the state and national levels; researching and reporting on safety concerns and best business practices; and providing five yearly forums where these and other relevant member issues can be advanced.

The Crosby Group Partners with Warriors 4 Wireless to Help Veterans Transition to New Careers

The Crosby Group (“Crosby”), which is home to leading brands Crosby, McKissick, Lebus, and National Swage, announced a partnership with Warriors 4 Wireless. Crosby is donating mission critical lifting and rigging equipment and training as well as making a financial contribution to support Warriors 4 Wireless, an organization dedicated to helping veterans transition to new careers in the wireless industry.

Crosby’s donated equipment will be used to train returning veterans who

Wire Rope News & Sling Technology August 2014

have completed their military deployments and now wish to seek full-time employment within the telecommunications industry, which is experiencing one of the most expansive build-out and upgrade periods ever. Communications Carriers, utilities, federal agencies, wireless vendors and system integrators across the U.S. are facing a critical shortage of qualified and trained workers to support critical projects, significantly impacting the entire wireless technology ecosystem. The majority of the skills required to keep pace with the industry-wide expansion align perfectly with those learned in wireless deployment, maintenance and technical support positions of the military, providing a great opportunity to support our returning veterans.

Jason Struthers, CEO of Crosby, stated, “Warriors 4 Wireless is a natural fit for Crosby in that it combines a

What’s

your

Working Load Limit?

We can help.

Call 800.334.1987 for a free demonstration CD. MIS by Accu-Tech

Windows based inventory, purchasing, sales, certification, and financial management solutions for the Rigging Industry since 1979

accutech-mis.com

shared passion to give back to our veterans with an industry that embraces the quality and safety that Crosby’s rigging products and training represent.

We are proud to support this venture that assists our veterans as they gain the necessary skills to ensure safety and success in their new vocations.”

Kelley Dunne, President and CoFounder of Warriors 4 Wireless, stated, “We are honored to be supported

by The Crosby Group, which has long been a leader in the wireless infrastructure industry. Their partnership and support is a great example of supporting our nation’s veterans to create long term, sustainable careers that will help transform the industry.”

“This collaboration represents part of a broader effort for KKR’s US-based industrial portfolio companies to partner with not-for-profit organizations that benefit from the use of the companies’ products,” said Pete Stavros, a Crosby Director and Head of KKR’s Industrials investment team. “Crosby and Warriors 4 Wireless are a perfect match.

Our servicemen and women coming home deserve strong support as they transition to new careers, and Crosby has the right equipment and training

to do just that.”

About Warriors 4 Wireless Warriors 4 Wireless (W4W) is a non-profit formed to bridge the gap between the demand for trained and deployable wireless technicians and the thousands of qualified servicemen and women eager to transfer the skills they’ve learned in the military to civilian careers. Our organization provides training, advanced certification and transitional support for veterans, providing them with the building blocks they need for lucrative new careers in the telecommunications industry. For additional information about Warriors 4 Wireless, please call 855-W4W-JOBS (855-949-5627) or visit www.warriors4wireless.com.

About The Crosby Group The Crosby Group is a global leader in the manufacturer of premium accessories used in material handling and rigging applications for a wide range of industries. The company, known for its uncompromising quality, premier customer service, and ‘world-class’ training programs, offers the broadest range of products suitable for the most demanding of operating conditions. Products include wire rope clips,

hooks, shackles, lifting clamps, hoist rings, overhaul balls, snatch blocks, crane blocks and sheaves. The Crosby Group is a portfolio company of KKR. For additional information about Crosby, please call (800) 797-4611 or visit www.thecrosbygroup.com.

Kito Americas, Inc. acquires Peerless Industrial Group

Kito Americas, Inc. announced that the company has entered into a stock purchase agreement to acquire Peerless Industrial Group from Westview Capital Partners II, L.P. by purchasing all the shares of Peerless Industrial Group, Inc. The share transfer of Peerless shall be executed subject to the terms and conditions in the Stock Purchase Agreement. Kito Americas, Inc. currently operates Harrington Hoists, Inc. and Kito Canada (KCI) businesses in North America and is the largest subsidiary of the Kito Corporation of Japan. Kito is listed on the Tokyo Stock exchange (TSE1) under the stock ticker 6409.

Kito Americas will, by combining with Peerless, expand its product to continued on next page

Wire Rope News & Sling Technology August 2014

57

continued from previous page better serve its customer segments around the world and strengthen its North American business. Kito Americas is currently a market leader in providing powered and manual overhead lifting products. Peerless is the largest manufacturer and distributor of chain and chain products in North America.

The combination of the Peerless, Harrington, and Kito brands will give our combined customers access to a much wider variety of products in the markets currently served and also allow faster expansion of the Peerless products throughout Kito’s global network.

The final closing of the combination of these companies will occur in late August.

Ned Hunter, Kito Americas’s President and CEO of Harrington Hoists, Inc., commented, “Peerless’ product portfolio integrates well with our core overhead lifting customers and also allows us to diversify our customer base.

We expect to better serve our material handling customers by offering a much broader, high quality product range and also access new markets around the world through our global subsidiary operations and distribution networks. This combination allows us to better serve our rapidly growing customer base and also increases our global manufacturing footprint in order to streamline supply chains and provide seamless, high quality services. We are excited about this opportunity to increase our value to our customers and team members.”

58

Tom Wynn, President and Chief Executive Officer of Peerless, commented, “We recognize the dramatic opportunity with this joining of our businesses and feel this is a game changer within the industry. It is anticipated our combined customers and employees will realize significant value with this new partnership. Wynn went on to say that Kito, Harrington and Peerless all share the same core values and philosophy of superior quality and customer service.”

Yoshio Kito, President of Kito Corporation, commented, “Both Peerless and Kito believe that the quality of products and services is critical to success. We also both believe that it is important to focus on our customers, and to do that, we need to have the best people in the industry. The combination of Peerless and Kito is perfect; we share a common philosophy.”

About Peerless: Established in 1917, Peerless is a market leader in the design, manufacturing and supply of chain, overhead lifting, cargo control and traction products in North America. Headquartered in Winona, Minnesota they operate three manufacturing locations and six distribution centers. The company offers best-in-class products, innovation and custom solutions to a diverse industrial and consumer customer base.

Peerless is also recognized around the world for the premium product brands of ACCO, Peerless, Security Chain and the patented products provided within each brand.

Wire Rope News & Sling Technology August 2014

About Kito Corporation and Kito Americas, Inc. Kito Corporation is a worldwide leader in the design and manufacture of hoists, cranes, and other components for overhead lifting and other material handling products. Kito Americas, Inc. is the US subsidiary of Kito Corporation and is the parent company of Harrington Hoists, Inc. and Kito Americas.

Kito Americas, Harrington Hoists, and Kito Canada operate two manufacturing sites and three value added distribution sites in North America.

Certified Slings and Supply named charter member of Harrington Hoists & Cranes Gold Club

Casselberry company recognized for performance and sales Harrington Hoists & Cranes recognized Certified Slings and Supply for its brand education and sales volume with charter membership to its Gold Club. Gold Club status notes Certified Slings’ dedication and work to help grow the Harrington brand.

Certified Slings & Supply is a family owned business that enjoys more than 80 years of combined expertise in custom rigging, overhead lifting, load securement, and is a national leading contractor and supplies provider. Its clients range from theme parks to utilities, mining companies, government and contractors.

“We believe in the quality and durability of Harrington Hoists and we daily share that information with our clients throughout Florida and internationally,” Certified Slings’ CEO Doug Worswick said. “We’re pleased to join an elite membership established by Harrington, a company which we have known as a trusted manufacturer.”

“Certified Slings & Supply is an important member of our family of distributors,” Harrington Hoists & Cranes COO Carlo Londardi said.

“Making it a Gold Club Award charter member is our way of rewarding it for its commitment to our brand and partnership.”

Certified Slings expanded Harrington’s presence when it added a Harrington Hoists inspection and repair facility to its Tampa Service Center. This, Worswick said, will provide better access to the product throughout the state of Florida.

Orlando-area based Certified Slings & Supply provides direct service to

customers worldwide. Second and third generation family members list a combined 70 years of experience in the 56-year-old business that specializes in the rigging, overhead lifting, load securement and contractor supplies industry. An ISO-certified manufacturer and distributor, Certified Slings employs 135 team members at seven Florida locations that serve customers throughout the United States, Central and South America as well as the Caribbean. The company further conducts safety seminars, testing and inspection services, engineering and design services, online shopping and a 24-hour customer service hotline. It is twice recognized among the Orlando Business Journal’s “Best Places to Work.”

For more information visit www.certifiedslings.com.

Fagioli, Omega Morgan and Barnhart win SC&RA Rigging Job of the Year Awards

The Specialized Carriers & Rigging Association (SC&RA) has announced* the winners of the Rigging Job of the Year Awards. The awards went to Fagioli, Opera, Italy, in the Jobs over $750,000 category; Omega Morgan, Fife, Wash., in the Jobs between $150,000 and $750,000 category; and Barnhart, Memphis, Tenn., in the Jobs under $150,000 category.

Over $750,000: Fagioi Recovers Wreck of Cruise Ship Costa Concordia Fagioli recovered in one piece the wreck of the cruise ship Costa Concordia, which had come to rest on an underwater rock ledge off the coast of Isola Del Giglio, Italy, in January 2012.

It was the first time that such an operation had been performed on a vessel with such huge overall dimensions: 300 meters long and 114,000 gross tons.

Fagioli divided the wreck recovery plan into four basic steps, each involving expert engineering and detailed planning. The steps were anchoring and stabilizing the ship; preparing a false, subsea bottom; righting the vessel using rotational leverage (or parbuckling); and, finally, surveying the wreck and installating sponsons.

The first step, stabilization, was carried out by securing four anchor blocks to the sea bottom between the center *Editors Note: Though this announcement took place around May 15, 2014, it was too large an item to include in our June issue.

However, we thought it still an important and newsworthy story to share despite the timeline.

2014 Rigging Job of the Year Winners: From left to right, Crane & Rigging Group Head Judge, George Young, George Young Company; Rigging Job of the Year Winners, Edoardo Ascione, Fagioli Inc.; Ralph Dicaprio, Omega Morgan; Chris Howe, Barnhart Crane & Rigging, 2013-14 SC&RA President, Ron Montgomery, Intermountain Rigging and Heavy Haul.

of the wreck and the coast by means of 16 300- to 450-ton capacity strand jacks positioned on the wreck. Seven more anchor blocks and 12 towers were installed to secure the position of the wreck keel during the rotation. The 12 sets of Fagioli tower lift and strand jack systems (L600 jacks positioned on top of each tower) were combined to perform the stabilization.

Next, a false bottom was prepared on the seabed for the ship to rest on after it was rotated. The subsea platforms, comprised of 1,180 removable grout bags weighing more than 16,000 tons, provided a stable base for the vessel.

Eleven large floating tanks, known as sponsons and weighing up to 500 tons each, were positioned on the port side of the ship. Using gantry cranes, mobile cranes and 48 axle lines of SPMTs, Fagioli provided the equipment for the load out, load in and rotation upside down of the sponsons. After installation of the sponsons by the client, Fagioli rigged 36 strand jacks on top of the 9 sponsons on the starboard side of the wrecked ship.

The power pack units (PPUs) used to allow the 36 jacks to work during the parbuckling operations needed to be placed on the wreck, which meant during the duration, the PPUs not anchored as the strand jacks could have created a large-scale stability problem.

In response, Fagioli’s team used two swinging platforms installed onto the tallest sponsons, equipped with generators and PPUs. This allowed the PPUs to remain stable at the highest water

levels during the rotation. To provide buoyancy and stabilization, two blister tanks were installed at the bow of the ship by the client.

To assure safety in the work area, Fagioli completed the connection of all the electronic and hydraulic components in a control room positioned on a barge clear of the work area. The strand jacks were remotely controlled from the control room during the rotation operation.

In mid-September 2013, the parbuckling operation began with three main phases: detaching the wreck from the spurs of rocks on which it rested; the rotation phase induced by strand jacks until the vessel rotated approximately 25 degrees from its initial position; and the rotation phase by means of ballasting of the sponsons and jacks. At the end of the final phase the wreck would complete 64 degrees rotation and would rest on the false bottom platform at a depth of 30 meters.

Over the course of more than a year, Fagioli was involved in almost every element of the project, ranging from calculations, risk assessment, method of statements, procedures and in the road and sea transport of all the equipment.

The job was dramatically influenced by weather and sea conditions with the risk of losing the wreck, or in the worst case, sinking it.

The strand and tower lift positioning was critical, as the ship rested a few meters from rocks where it was impossible to position the tower. The foundations of the tower were installed in the continued on page 73

Wire Rope News & Sling Technology August 2014

59

Inventor’s Corner

By William Fischer

Thank you for your interest in this addition of Inventor’s Corner. We continue to illustrate innovations which will help to revitalize heavy industry and encourage growth. As always, we hope this column spurs ideas in how these innovations can aid in your business and commerce.

Helicopter transportable antenna mast and stay cable system Pat. 7,796,093 U.S. class 343/874 Int. class H01Q 1/12 Inventor: Gary Lee Scott, Richmond, TX. Assignee: Geokinetics Acquisition Company, Houston, TX. An antenna mast system includes an antenna mast and a plurality of circumferentially spaced apart upper cable tensioning arms each coupled at one end proximate the top of the mast. A plurality of circumferentially spaced apart lower cable tensioning arms are each coupled at one end to the mast at a selected distance below the upper cable tensioning arms. A plurality of stay cables are each coupled at one end to one of the upper cable tensioning arms and at the other end to an anchor affixed to the ground. The stay cables are each coupled to a respective one of the lower tensioning arms. The system includes means for tensioning the stay cables.

One example of an antenna mast and stay cable system

Figure 2: Detailed view of tensioning arms used in the example of figure 1.

Figure 1: Example of an antenna and stay cable system installed, assembled and erected at a particular location.

60

Wire Rope News & Sling Technology August 2014

according to the invention is shown installed and assembled in figure 1. The mast and stay cable system 10 includes an elongated antenna mast 12. The antenna mast 12 may be made from tubular segments (not shown separately in figure 1) joined together end to end, such as by threaded coupling, pinning or other device known in the art to couple segments longitudinally to form an elongated element. The mast 12 may be made from aluminum or other high strength, lightweight metal, or from fiber reinforced plastic, such as glass

Join The RevoluTion

Figure 3: Detailed view of an example device to releasably couple a stay cable to an anchor and to apply tension to the stay cable.

fiber or graphite fiber reinforced plastic.

Examples of coupling mast segments end to end are shown in figures 2 and 3. Figure 2 shows a mast segment 112A having a male threaded coupling 112 at one end. The threads on the male threaded coupling 112 are configured to mate with threads on a corresponding female threaded coupling 212 disposed at the longitudinal end of an adjacent mast segment 112A. Figure 3 shows a mast segment having a reduced diameter pin end 312 and a hole 112B for a locking pin 112C. A mating box end 412 with corresponding locking pin hole 112B is shown at the longitudinal end of an adjacent mast segment 112A and accepts the pin end 312.

The locking pin 112C is inserted through the holes 112B in both segments 112A when they are placed together. The pin 112C may be retained in place by a “hairpin” spring clip 112D or similar retaining element.

The mast 12 may have a length in the range of about 40 to 120 feet (13 to 40 meters) although the particular length of the mast 12 is not intended to limit the scope of the invention. The length of the mast 12 used in any particular application of the mast and stay cable system 10 may be selected such that an antenna element 14 disposed at the upper end of the mast 12 will be positioned above any vegetation or other obstruction to radio communication. If the mast 12 is formed from longitudinally coupled segments, the length of the mast 12 may be readily changed to suit the particular application.

The mast 12 may be supported on its bottom end when the system 10 is erected by a support spike 26 coupled or affixed to the bottom end of the mast 12. The support spike 26 may be a sharp pointed, rigid device intended to penetrate the ground surface 30 when the mast 12 is lowered to the ground 30, or, alternatively, the support spike 26 may be a blunt-ended device configured to rest in a suitable receptacle 26A inserted into the ground 30. The purpose of the support spike 26, however secured to the ground 30, is to prevent lateral movement of the bottom of the mast 12. In the event a receptacle 26A is used, the mast 12 may be configured without a support spike as a separate and distinct element.

In such case, the lower end mast 12 may be inserted directly into the receptacle 26A. During assembly of the mast system 10, the mast 12 may be suspended from one end of a support cable 16. The other end of the support cable 16 may be held above the mast position from a helicopter or other device such as a crane or winch. The cable 16 may be connected to the mast 12 by a cable support 31, which may be in the form of a rod, channel, I-beam, stretched cable or other structure that can support continued on next page

Do you want a tool or do you want a toy?

When you face a tough job, you don’t want to mess around. You need a tool that works every time, every day. The Harrington LB lever hoist is built for those demanding applications, strong and reliable to get real jobs done right.

Harrington’s lever hoist is rated the best in the industry because it can take whatever you dish out. With a compact low-headroom design and a short steel handle, this mighty hoist will easily fit anywhere your work demands. This is the tool that works every day to finish the job — faster and easier, every time.

• Heavy-duty, all steel construction • Nickel-plated, corrosion-resistant load chain • Easy to operate, transport and store • Revolutionary freewheeling for one-handed operation • Capacity range ¾ – 9 Ton

Join the Revolution and visit us at www.harringtonhoists.com

Manheim, PA/800•233•3010 Corona, CA/800•317•7111 A Kito Group Company

Wire Rope News & Sling Technology August 2014

5285-1913_LBtool_HPV_wrnD5d.indd 1

61

7/15/11 1:35 PM

continued from previous page a cable loop, closed eye, ball or other termination coupled to or formed in the end of the cable 16.

In the present embodiment, the cable support 31 may be in the form of a rod to engage a loop in the end of the cable 16. The support rod 31 may be configured such that when

Figure 4: Cross section of first embodiment of a mast.

the mast 12 is supported by the helicopter or other device, the cable 16 will be stopped from moving at the upper end of the cable support rod 31 so as to transfer the weight of the mast 12 through the end of the support rod 31 to the cable 16 (and thus to the helicopter or other device). The mast 12 may thus be held in a near vertical orientation by the tension on the cable 16 during assembly of the mast system 10. After assembly of the mast system 10 is substantially

cables 20 provides the combined structure of mast 12 and upper stay cables 20 with substantial resistance to lateral deflection such as by wind or the weight of any equipment installed near the top of the mast 12, including the antenna element.

Figure 5 shows a more detailed view of the quick connect 35 coupled to the anchor eye 34. The quick connect 35 may include two, spring loaded levers 35A, 35B which are ordinarily urged such that the distal ends overlap, forming a closed loop. When a user depresses the two open ends of the levers 35A, 35B together, the loop opens, enabling the loop to be removed from (or affixed to) the eye 34. The tensioner may be a wire “come-along� of any type known in the art.

In other examples, the tensioning arms 22, 23 may be fixedly coupled to the mast so as to extend laterally perpendicularly outward from the longitudinal axis of the mast, substantially as shown in figure 1. In such implementations, the lower stay cable 21 and the upper stay cable 20 may each be formed from single length of wire rope or the like, and fixedly attached to the outer end of one of upper tensioning arms. The outer end of each lower tensioning arm 23 may include an eye (not shown in FIG. 1) or other closed guide such that tension on the lower stay cable 21 will be directly applied to the upper stay cable 20.

Dynamic tension control apparatus and method for aero-mechanical conveyor Pat. 7,798,313 U.S. class 198/814 Int. class B65G 23/44 Inventor: David Francis Hesketh, Fort Mill, SC. Assignee: Spiroflow Systems, Inc., Monroe, NC. This patent presents a tensioning assembly for use in an aero-mechanical conveyor for moving bulk materials. The conveyor includes upper and lower housings having head and tail pulley assemblies mounted therein. The tensioning assembly includes first and second extendable tubes that de-

Figure 5: Cross section of second embodiment of a mast.

completed so as to laterally support the mast 12, as will be explained further below, the helicopter (not shown) or other device may extend the cable 16. When the mast 12 is supported laterally, extending the cable 16 will cause it to slide down the support rod 31 so as to enable its removal from the bottom of the support rod 31. The helicopter (not shown) or other device may then retract the cable 16 and leave the mast system 10 assembly location.

Referring to figure 4, the upper tensioning arms 22 and lower tensioning arms 23 are shown in their retracted positions, that is, with the free ends moved laterally proximate the mast 12. Each of the upper tensioning arms 22 can be urged into its retracted position, as shown, by means of a torsion spring 27 disposed around each pivot 24 and configured to rotate the free end of each corresponding upper tensioning arm 22 toward the mast 12. Correspondingly, each lower tensioning arm 23 may be urged into its laterally retracted position by an associated torsion spring 29.

As the lower tensioning arms 25 are pulled away from the mast 12 by the users pulling on the lower stay cables 21 and engaging the quick connects, the torsion springs 27, 29 provide tension on both the lower stay cables and on the upper stay cables 20. Tension thus maintained on the upper stay 62

Wire Rope News & Sling Technology August 2014

Figure 6: Cut-away side elevation of a tension control.

tioned in the infeed housing 14. A continuous rope assembly 40 upon which multiple identical disks 42 are carried is disposed around the head and tail pulley assemblies 32 and 36, and extends through the respective inflow and outflow conveyor tubes 16 and 18. Inflow conveyor tube 16 includes an inlet tube 48 having a lower end 50 which is connected to infeed housing 14. The inlet tube 48 also includes an upper end 52. Tubular portion 54 is connected to the upper housing 12 at the bottom portion 22 at an upper end 56. Outflow conveyor tube 18 similarly includes an outlet tube 62 having a lower end 64 connected to infeed housing 14 and an upper end 66. A second upper tubular portion 68 of outflow conveyor tube 18 has an upper end 70 connected to the housing 12 and a lower end 69.

A drive mechanism 44 is positioned adjacent to the infeed housing 14 and is operatively connected to the lower shaft 38. The drive mechanism 44 drives the lower shaft 38, causing the head pulley assembly 32 to rotate. This in turn drives the tail pulley assembly 36, and causes the rope assembly 40 to travel in the direction “D” shown. As the rope assembly travels, the disks 42 carry particulate matter from the inlet hopper 30 through the inflow conveyor tube 16, and into the upper housing 12, where the particulate matter exits the conveyor 10 through the outlet opening 28. Although the drive mechanism 44 is shown in figure 6 operatively connected to the lower shaft 38, the drive mechanism 44 may alternatively be operatively connected to the upper shaft 34.

Continuing to refer to figure 6, the conveyor 10 also inFigure 7: Partial front view of the tension control apparatus shown in figure 6, wherein the tension control apparatus is in a first position.

fine sections of inflow and outflow conveyor tubes that interconnect the upper and lower housings. An endless rope assembly is disposed within the conveyor tubes and around the head and tail pulleys. An adjustable actuator is positioned in cooperative engagement with the first and second extendable tubes. When the actuator is in a first position, the extendable tubes have a first length and when the actuator is in a second position, the extendable tubes have a second length. The actuator is configured to move between the first position and the second position in response to changes in tension within the endless rope assembly as indicated by a signal from a tension measuring device.

Referring now specifically to the drawings, an aero-mechanical conveyor according to the present invention is illustrated in figure 6 and shown generally at reference numeral 10. The conveyor 10 includes an upper housing 12 and an infeed housing 14 that are interconnected by inflow and outflow conveyor tubes 16 and 18. A head pulley assembly 32 that includes a sprocket is mounted on an upper shaft 34 that is positioned in the upper housing 12. Upper shaft 34 extends through one side of the upper housing 12 perpendicularly to the plane upon which rope assembly 40 travels.

The upper shaft 34 is carried by and extends through bearing housings (not shown). The upper housing 12 includes a top portion 20 that is removably attached to a bottom portion 22 along first and second angle flanges 24. The top portion 20 is removable for permitting access to the interior of the upper housing 12 for inspection and maintenance, and defines an outlet opening 28 through which particulate matter can exit the conveyor 10. The upper housing 12 may optionally include a discharge chute.

The infeed housing 14 of conveyor 10 includes an inlet hopper 30 for storing particulate matter “P.” A tail pulley assembly 36 is mounted on a lower shaft 38 that is posi-

Figure 8: Tension control apparatus shown in figure 7, wherein the tension control apparatus is in second position.

cludes a tensioning assembly 200 which is configured to maintain a preselected amount of tension on the rope assembly 40. While the tensioning assembly 200 is shown in figure 6 in use on a vertical aero-mechanical conveyor, the continued on next page Wire Rope News & Sling Technology August 2014

63

continued from previous page tensioning assembly 200 may be used on an angled or horizontal conveyor, or on a conveyor having interconnected vertical and horizontal sections.

In one embodiment, tensioning assembly 200 includes flanges 202A, 202B that are attached to opposite ends of extendable tubes 220A, 220B and a pneumatic actuator 262 configured to extend and contract extendable tubes 220A, 220B by applying force to flanges 202A, 202B. Each flange 202A, 202B is an elongated bar having an opening formed through each end.

Referring to figures 7 and 8, each extendable tube 220A, 220B includes an outer sleeve 222A, 222B, that are each attached at one end to a flange 202A. In this regard, the bore of the outer sleeve 222A, 222B is aligned with an opening formed through flange 202A. Tensioning assembly 200 also includes a pair of inner sleeves 242A, 242B that are attached at one end to a flange 202B and are slidably received within the outer sleeves 222A, 222B at the other end. Inner sleeves 242A, 242B are each a cylindrical tube that has a bore that together with the bore through the associated outer sleeve 222A, 222B forms a passageway for conveying particulate. A pair of seals 244A and 244B are positioned around each of the inner sleeves 242A, 242B for engaging outer sleeve 222A, 222B. An air purge passageway 245 is formed through outer sleeves 222A, 222B that connects a space defined between outer sleeve 222A, 222B; inner sleeve 242A, 242B; and the pair of seals 244A 244B to a source of compressed air. The compressed air is maintained at a pressure sufficient to purge the space and to prevent accumulation of dust and debris within the space. The sealing members can be o-rings formed of PTFE, EPDM, butyl rubber, or other suitable material. Each engaged set of outer sleeves 222A, 222B and inner sleeves 242A, 242B form an extendable tube 220A, 220B that each defines a section of inflow and outflow conveyor tubes 16 and 18 respectively. It should be appreciated that extendable tubes according the present invention can be formed directly from the inflow and outflow conveyor tubes 16 and 18 that are attached to the upper housing 12 and the infeed housing 14.

A pneumatic actuator 262 is positioned between the tubes 220A, 220B and is connected to flanges 202A, 202B at opposite ends. Movement of pneumatic actuator 262 causes movement of flange 202A relative to flange 202B and thus movement of the tubes 220A, 220B. The pneumatic actuator 262 is connected to a source of compressed air 263 that can be adjusted to a predetermined pressure via a pressure regulator 264. Tubes 220A, 220B can thus be extended and retracted by varying the air pressure applied to the pneumatic actuator 262, and tubes 220A, 220B can be held in a desired position by maintaining a constant air pressure with pressure regulator 264 when the tension on rope assembly 40 is constant. In this regard, the air pressure of pneumatic actuator 262 is a signal indicative of tension in rope assembly 40.

Tensioning assembly 200 is positioned between upper housing 12 and lower housing 14 of aero-mechanical conveyor 10. Referring again to figure 6, upper end 52 of the inlet tube 48 is connected to second flange 202B at an opening such that inlet tube 48 is axially aligned with the passageway that extends through extendable tube 200A. End 55 of first upper tubular portion 54 is connected to first flange 202A such that tubular portion 54 is connected with inlet tube 48 via the passageway of second extendable tube 220B. Similarly, upper end 66 of outlet tube 62 is connected to second flange 202B at an opening such that inlet tube 48 64

Wire Rope News & Sling Technology August 2014

is axially aligned with the passageway of first extendable tube 220A. Lower end 69 of second upper tubular portion 68 is connected to first flange 202A such that tubular portion 68 is connected to outlet tube 62 via the passageway of first extendable tube 220A. Cable assembly with anchor Pat. 8,181,437 U.S. class 57/22 Int. class D01H 15/00 Inventor: David Malcolm Glennie, Singapore, SG., Lew Kah Hoo, Singapore, SG. Assignee: Franklin Offshore International Pte. Ltd., Singapore, SG. A cable assembly comprises a cable having a main body, strands, a tail and a first cable end, an anchor, and a sleeve having a bore, a first end and a second end. The first end is positioned generally adjacent to the anchor, the second end is positioned remote from the anchor, and the cable end is positioned in the bore. A cured adhesive is positioned in the bore, binding the sleeve to the cable, along with a rope insert which is positioned at least partially in the bore, wherein the cured adhesive holds at least one rope insert in a fixed position with respect to the sleeve.

Turning now to the drawings, figure 9 shows a side view

Figure 9: Side view of a cable assembly with a flemish eye.

QUICK LINK

• Material Tested & Certified • Superior Quality • De-burred Thread • EN362 & EN 12275 Certified

Figure 10: Longitudinal cross section view taken through the sleeve showing rope inserts and a positioning ring.

of a preferred embodiment of the cable assembly 10. The cable assembly 10 includes a cable 12 having a main body 14. Preferably the cable 12 comprises a core rope and outer ropes 19. Each rope preferably comprises a series of strands 16. The construction of the core rope and the outer ropes 19 is preferably in accordance with the standards specified in ISO 10425:2003 API-9A. Each of the strands 16 can comprise steel or another suitable high strength material. Preferably the cable assembly 10 has an anchor 25. The anchor 25 can be formed as a flemish eye 24. Rope 19 of the cable is split into portions at a tail 20 and wrapped over an opposite portion of the rope. The portions are recombined with the main body 14 at a cable end 22 at a sleeve 30. Optionally an end cap 70 may be provided which is useful as an antifouling member during use. In a similar manner, the anchor can also comprise a second anchor 125 formed as a second flemish eye 124 at a second tail 120 and may be closed off at a second end 122 of the cable 12 using a second sleeve 130 and an optional second end cap 170.

Figure 10 is a cross section view of an end of flemish eye 24 at the sleeve 30 of figure 1 where the strands are recombined with the main body 14. As noted above the flemish eye 24 is formed by dividing strands of the cable at the tail 20, and wrapping or laying the strands over each other. A first end 22 of the cable is secured around the main body of the cable inside a bore 32 of the sleeve 30. Preferably the sleeve 30 circumferentially surrounds a portion of the main body 14 of the cable 12 and a portion of the tail 20. The sleeve 30 has a first end 34 generally adjacent the anchor 25 and a second end 36 positioned more remote from the anchor 25. The tail 20 is preferably distributed or wrapped evenly around the main body 14 of the cable to ensure a uniform load distribution.

The sleeve 30 and adhesive 40 cooperate to lock the strands 16 of the cable 12 in place. A positioning ring 60 may be provided which is preferably positioned in the bore 32.

The ring 60 may extend circumferentially around the cable continued on next page

GET THE

HOT FORGED ADVANTAGE Wichard Products are Hot Forged for Superior Strength and Safety. certified ISO 9001 Make Sure You Have The Mark Of Quality

All Forged & Hot

www.wichard-usa.com

www.ThomasNet.com Tel: (401) 683-5055 • Fax: (802) 655-4689 Email: info@wichard-usa.com Wire Rope News & Sling Technology August 2014

65

continued from previous page

sleeve after the sleeve is sealed. The adhesive is preferably allowed to harden before a main pour is made to complete and strengthen the seal ensuring that there will be no leakage of the main pour. Once the resin is mixed to a preferred consistency, the resin should be poured immediately into the sleeve to ensure good penetration into interstices (gaps) of the cable. Immediate pouring will ensure that the gelling stage occurs in the sleeve and not in the mixing container.

Preferably, the adhesive is poured down the side of the sleeve to allow air to escape.

The cap 70 may preferably be attached to the second end 36 of the sleeve 30 remote from the flemish eye in any of a number of ways, for example, welded together, with the cable 12 extending through the cap bore 72. The cap may comprise steel or other suitable high strength material.

As shown in figure 2, the shape of the cap 70 is preferably conical. That is, the first end 74 of the cap has a cross section width 78 greater than a cross section width 79 of the second end 76 of the cap 70. The purpose of the cap is two fold: to provide some extra support for the sleeve to restrict

Figure 11: Cross section view of the sleeve taken through line 3-3 in figure 10.

12. The ring 60 acts an alignment agent, centering the cable within the bore 32. The ring 60 also allows the tail and main body 14 to set in the adhesive in a controlled manner during assembly. Preferably the ring is positioned near a second end 36 of the sleeve 30. Both the sleeve and the positioning ring may be made of steel or other suitable high strength material.

The adhesive 40 which is used to help hold the flemish eye 24 in place is preferably a composite resin or a thermosetting resin. A suitable example of an acceptable resin is sold under the name Maklock. During assembly, the adhesive is introduced into the sleeve after the flemish eye is formed and the sleeve is fitted around the cable. The second end 36 of the sleeve is preferably sealed using plasticine or a similar material to prevent leakage. As a further advantageous step, a quantity of the resin, such as between 5 and 10% of the total volume, is preferably mixed and poured into the

Figure 12: Cross section view of the sleeve taken through line 4-4 in figure 10.

66

Wire Rope News & Sling Technology August 2014

Figure 13: Cross section view of the sleeve taken through line 5-5 in figure 10.

relative movement, and to act as an anti-fouling member when in use. That is, the cap helps guide external elements away from the sleeve, preventing them from catching on the sleeve. This helps to ensure smooth maneuvering of the cable assembly when in use.

In accordance with a highly advantageous feature, rope inserts 50 are positioned within the bore 32 of the sleeve 30.

The rope inserts 50 preferably comprise a short length of a cable similar to the material used for cable 12. However, the rope inserts 50 may use strands smaller in diameter than the strands 16 of cable 12. The rope inserts are shown in figure 10 as positioned within the bore circumferentially around the cable 12 and can preferably have a stem 52 and broom 54. Most preferably, at least one rope insert extends partially out of the adhesive and even out of the bore of the sleeve. That is, the broom 54 is exposed by a small amount (for example 1 to 2 mm) above the adhesive. The broom 54 can comprise part of the rope insert which is separated or unwound to increase surface area for the adhesive 40 to bind to. Preferably, the broom 54 is closer to the first end 34 of the sleeve 30 than the stem 52. The broom can comprise part of

Do you have news that belongs in this publication?

Designer & Manufacturer Custom Lifting Solutions (Automated, Manual, Powered, Mechanical)

Do you have a product or service you would like to introduce to our industry?

Have you promoted someone in your company?

Tell us about it, and we’ll consider it for publication.

It’s free!

Lift Beams, Spreader Beams, Crane & Forklift Baskets, C-Hooks, Coil Lifters Material and Man Crane Baskets, Adjustable Spreader Beams

All it will cost you is the time it takes to write it up and send it to us. You might be surprised what a little publicity can do for your business.

Send your news to:

Wind Turbine Lifting Systems: Nacelle, Tower, Pitch Bearing, Blades In-Stock Crane Baskets, Ready to Ship!

ISO 9001:2008 REGISTERED

Email: info@wireropenews.com

716.667.6833 888.ELT.LIFT

the rope insert which is separated or unwound to increase surface area for the adhesive 40 to bind to. This increased surface area is highly advantageous, especially with large cable assemblies in that the adhesive has more material to bind to, increasing strength of the cable assembly and helping to reduce surface cracking of the adhesive.

Figures 11-13 show cross section views of the cable in the sleeve 30, taken through figure 2. Figure 11 is taken through the broom 54 of the rope insert 50, figure 12 is taken through the stem 52 of the rope insert, and figure 13 is taken where the rope insert is not present. In figures 11 and 12, the rope inserts 50 are shown positioned spaced evenly and circumferentially around both the main body 14 of the cable 12 and part of the tail 20, in the adhesive 40. Figure 12 also shows an option where the tail 20 is partially unwound. Figure 13 shows the main body 14 having a cable diameter 13 which is used to calculate a preferred length 38 of the sleeve 30, as noted above. In the preferred embodiment shown in the figures, the cable 12 comprises a core rope 17 having the outer ropes 19 wrapped around the core. Various numbers of outer ropes may be used, depending upon the intended application.

mating support are made of a low-wear material relative to the strap and are mutually parallel, as well as parallel to the strap outlet aperture. The elastic element and the mating support together subtend a gap through which the strap is pulled.

Figure 14 shows a package strapping apparatus denoted overall by the reference 10. The apparatus shows a strap guide frame 11 mounted on a base S. A number of different and omitted units are housed within the base S, one of the units being a strap locking system. A packing bench supporting the package to be strapped and conventionally transverse to the frame 11 also is omitted.

The strap guide frame 11 is constituted by four frame legs 12 joined to each other by corner parts 13. The frame furthermore comprises a first retainer device 14 consisting of flaps or lids 15 and 16 and enclosing strap outlet aperture 23 omitted from this Figure but shown in figure 15. In this Figure a pair of lids 15, 16 is supported on each frame leg 12, the lengths of the lids 15 and 16 in each case substantially corresponding to the length of a frame leg 12, as a result of which the lids 15 and 16 completely close the strap outlet aperture 23.

A second retainer device 17 is associated with at least one side of the strap guide frame 11, in this instance therefore the inside, of a segment of the strap outlet aperture 23, and the second device here comprises elastic elements in the form of prestressed and hence energetically elastic (non dissipative of energy) wire cables 18 and 19 subtending between them a gap 24. In this instance each pair of wire cables 18 and 19 is respectively associated to a frame leg 12. Accordingly the second retainer device 17 shown in figure 14 comprises four continued on next page

Device for strapping packages with strapping material Pat. 7,757,468 U.S. class 53/589 Int. class B65B 13/06 Inventor: Hans Gunter Kastner, Wulfrath, DE. Assignee: Illinois Tool Works Inc., Glenview, IL. An improved retainer system allows reliable strapping of a package while incurring only minimized wear. An additional retainer device is placed in front of the inner side of the strap guide frame and comprises an elastic, longitudinally stretching element and a mating support. The elastic element and

WWW.ELTLIFT.COM

Wire Rope News & Sling Technology August 2014

67

continued from previous page pairs of wire cables 18 and 19. Obviously a circumferential pair of wire cables 18 and 19 also may be used as energyconserving cable elements.

Two holder components 20 and 21 being part of the retainer device 17 are mounted on each corner part 13. The strap 22 (omitted from figure 1) is shot in the direction of

Figure 16: Sectional view in the manner of figure 15 showing the strap when being pulled back and tensioned.

Figure 14: Perspective overview of the strapping apparatus.

the arrow “a” by means of an omitted but well known strap mover at high speed into the strap guide frame 11 until the leading strap end, having completed one lap through the frame, has reached the locking unit. Once there, the end of the strap 22 is held in place and the free length of the strap 22 will be pulled back in the arrow direction “b”. In the pro-

Figure 15: Cross-section of the strap guide frame along the sectional line II-II of figure 14.

68

Wire Rope News & Sling Technology August 2014

cess, the pairs of lids 15 and 16 open up and uncover the strap outlet aperture 23, as a result of which the tape can be pulled out of the strap guide frame 11 and be pulled farther through the gap 24 subtended between the cables 18 and 19 until the constituted strap loop around the package has been tautened.

Figure 15 is a sectional view along line II-II of figure 1 of a frame leg 12. The lids 15 and 16 are suspended from a C-shaped clearance 25 of the frame leg 12 to allow them to tip open in the directions “c” and “d” away from the leg 12.

By means of fasteners 27, a helical spring 26 connects the pair of lids 15, 16 to each other and keeps them in a rest position closing the tape (strap) duct 23. A strap guide part 28 is configured in the strap guide frame 11 and subtends a glide surface 29 on which the strap 22 is inserted without significant friction into the strap guide frame 11. The pair of wire cables 18, 19 is configured a space before the strap outlet aperture 23 and subtends the gap 24 of a width “w” less than the strap width W. Figure 16 is a sectional view corresponding to figure 15, the strap 22 in this instance being partly pulled out of the strap guide frame 11 and through the gap 24 of the second retainer device 17. When pulling the strap 22 out of its guide frame 11, the lids 15 and 16 of the first retainer device 14 are opened in the displacement directions “c” and “d” by the strap 22 or by extraneous control and in this manner they uncover the strap outlet aperture 23. Next the strap 22 dips into the gap 24 subtended by the wire cables 18 and 19 of the second retainer device 17 and in this manners the strap expands the gap 24.

Figure 17 is a partial, perspective view of a frame leg 12 and shows that the wire cables 18 and 19 will be forced apart only in that zone where the strap 22 is being pulled out at the time. Accordingly the wire cables 18 and 19 are consecutively forced apart by the strap 11 and then will immediately close thereafter. They restore automatically the gap which is less than the strap width W. This process may be construed as being a consecutive peeling of the strap 22 out of the second strap retainer device.

Figure 18 shows a section of a leg 12 of the strap guide

Figure 17: Perspective of a portion of the strap guide frame of figure 16.

frame 11, the second retainer device 17 in this instance being of a different design. Instead of the two wire cables 18 and 19 that heretofore combined the mating support and the elastic element into each other, this new design associates a substantially rigid mating support 30 with the wire cable 18. The mating support 30 is mounted by means of a crosssectionally C-shaped bar 31 to the frame leg 12, whereby its strap guide surface 32 is situated approximately in the area of present left outer edge 33 of figure 5 of the strap 22. If the strap guide surface 32 were situated too far in the zone of strap width W, the strap 23 when being pulled through the gap 24 would be undesirably twisted by the mating support 30, possibly entailing defective package strapping. On the other hand the longitudinally stretched wire cable 18 can be forced away from the mating support and is situated in the zone of the strapping width W, and is forced apart in gapwidening manner by the strap 22.

Figure 18: Sectional view of the strap guide frame along the sectional line II-II of figure 14.

Durable RFID tag Pat. 8,763,910 U.S. class 235/487 Int. class G06K 19/00 Inventor: Peter J. Hansen, Fishers, IN., Brandon C. Greenberg, Indianapolis, IN. Applicant: Peter J. Hansen, Fishers, IN., Brandon C. Greenberg, Indianapolis, IN. Plastic asset identification tags are described. The tags define an attachment feature by which the tag is attached to the asset. The tag also defines a cavity or slot in which an RFID transceiver is placed. Epoxy fills the remainder of the slot or cavity. The RFID transceiver is programmed to respond to interrogation by transmitting a unique identifier that is associated with the object to which the tag is attached. Additional information about the object may also be responsively transmitted, and in some embodiments that additional information is also written on the outside of the tag. Other tags seal the RFID transceiver within a pocket of flexible fabric-supported PVC. Turning now to the embodiment illustrated in figure 19, tag 100 includes an information-bearing surface 102, through-hole 104, RFID transponder 106, and transponder embedding cavity 108. Information-bearing region 102 is engraved with information about the item to which tag 100 is attached. In the illustrated embodiment, that object is a chain, and the displayed information includes the working load limit (WLL), serial number, size, grade, reach in feet and inches, and number of legs of the chain. In some applica-

Figure 19: Perspective view of an identification tag.

tions, additional information about the chain, such as acquisition date and source, maintenance records, and the like, is maintained in separated paper and/or electronic records. In other embodiments, such additional information is encoded on the RFID transponder 106 instead of or in addition to the information engraved in information-bearing surface 102.

RFID transponder 106 is positioned in transponder embedding cavity 108 as will be discussed further below. In the exemplary embodiment, the RFID transponder 106 is an INFOCHIP RFID chip manufactured and distributed by InfoChip Systems, Inc., of Wetaskiwin, Alberta, Canada.

In other embodiments, alternative RFID transponders are used. For example, RFID transponder 106 in various embodiments is active, semi-passive, or passive. Various transponders will have an integrated antenna, an external antenna, or both. The data provided by the RFID transponder 106 in various embodiments is loaded into the transponder 106 before it is placed within tag 100, after it is inserted into transponder receiving cavity 108, or repeatedly over time by remote means as will be understood by those skilled in the art in view of the present disclosure.

Turning to figure 20, a plan view of tag 100 is presented, and will be referred to in a description of the fabrication of tag 100. In this exemplary fabrication method, a sheet of continued on next page Wire Rope News & Sling Technology August 2014

69

continued from previous page plastic is prepared into rectangular sheets about 5 inches long, 1.5 inches wide, and 0.25 inch thick. The overall shape varies from one embodiment to another, but this embodiment includes rounded corners 114 and through hole 104. A laser, such as model V460-60 produced by Universal Laser Systems, Inc. of Scottsdale, AZ, takes a computerreadable graphics file as input and generates the outer contour accordingly, including curves 114. The laser also produces through hole 104 and engraves the identifying and characteristic information into information-bearing surface 102 as illustrated in figure 19. Transponder embedding cavity 108 is then created in the end of tag 100. In some embodiments, cavity 108 is created by a rotary bit, by laser, or by other methods that will occur to those skilled in the art based upon the present disclosure. Cavity 108 may be deep enough within the volume of tag 100 so that impact on the surface of tag 100 is unlikely to damage the RFID transponder 106.

The remaining space in transceiver cavity 108 is then filled. Abundant options will occur to those skilled in the art in the selection of materials with which to fill that space, but one suitable example is a 2-part epoxy casting resin (RESINLAB EP 965 LVLX Black), available for example from Ellsworth Adhesives in Germantown, WI. Alternative filling materials include LOCTITE HYSOL E-30CL, RESINLAB EP 1046 FG or RESINLAB EP 1121, or 3M SCOTCHWELD Structural Plastic Adhesive DP-8005, all available

Figure 20:Plan view of the embodiment of figure 19.

from Ellsworth Adhesives. The epoxy is inserted into cavity 108 after transponder 106, then cures at room temperature for one hour to a semi-rigid polymer state. Various materials are selected for different use cases, considering void penetration, wetting and adhesion properties, void penetration, air release, and finish to a smooth, high-gloss surface. Other factors include resistance to water, acids, bases and most organic solvents, ensuring that the RFID transponder 106 is protected from many physical threats. Of course, other fill substances meet other design goals and will occur to those skilled in the art in light of the present disclosure.

In this exemplary embodiment, the body of tag 100 is fabricated from NYLATRON GS from DSM Engineering Plastic Products in Reading, PA. Other embodiments are injection molded from DSM’s STANYL TW363, or ZYTEL ST801AW NC010 from DuPont. Those skilled in the art will find PVC, acrylics, and other plastics suitable for various applications. The tag 100 in this exemplary embodiment is UV-resistant and durable through high temperatures, sun exposure, water exposure, and other natural threats to its integrity. In this embodiment, after the fill substance in cavity 108 is set, the chip is encoded with information.

In some embodiments, the information encoded into transponder 106 is precisely the data engraved in informationbearing surface 102. In others, only the serial number is stored in transponder 106, while in still others additional recordkeeping information is stored.

A second embodiment is shown in figure 21. In this variation, tag 200 includes information-bearing region 202 and through-holes 204. Region 202 includes written information such as a company name, a number, a weight, and a working load limit. Through-holes 204 enable the attachment of tag 200 to identified objects by mechanical looping. An RFID transponder is embedded in tag 200 in another transponder-placement region 208. Referring to figure 21, it can be seen that transponder-placement region 208 is not located between through-holes 204.

Figure 22 illustrates another embodiment, suitable for situations when legible writing on the outside of the tag is not needed. In this embodiment, tag 300 comprises body 302, which defines through-hole 304 and cavity 306. Transceiver

Figure 21: Perspective view of an identification tag according to a second embodiment.

70

Wire Rope News & Sling Technology August 2014

The Master

Link

in your chain‌

Between You

Your Vendors,

4HE /NE 4HE /NLY 4HE "EST Your Vendors Your Inventory,

Your Inventory Your Sales

Your Sales, Your Customers,

Customers YourofReceivables, The Your Fastest and Most Reliable Method Swaging Flemish Eye Wire Rope Slings inYour the World.

Your Receivables Cash!

In Stock for Immediate Delivery Worldwide Toll Free: 1-877-ONE-PRESS phone: 905-778-1960 Lifting your software Load so that you can Secure More Money! e-mail: fast@onepress.com fax: 905-775-1424 We bring it all together into one software Package designed for your industry!

www.onepress.com

Distributor Computer Systems Inc. Phone: (856) 813-1750 Fax : (877) 830-0793 Email: Sales@dcs-success.com

Sea Link Wooden Shell Construction & Fishing Blocks

308 is placed within cavity 306, and the remainder of cavity is placed. After that placement, pocket 406 is RF-welded 306 is filled with epoxy 310. This embodiment can be made shut along closed path 410. Other closure techniques may be used in alternative embodiments, as will occur to those very small (relative to the size of RFID transceiver 308).

Figure 23 illustrates another embodiment, tag 400. In skilled in the art in view of the present disclosure. As this embodiment, tag 400 is made primarily of 18-pound, shown in these embodiments, the RF-weld along path 410 fabric-supported PVC sheets. Tail portion 402 in this em- makes pocket 406 substantially waterproof The data availbodiment merely provides a rectangular area that is use- able through RFID transceiver 408 in this embodiment can Singles • Do Doubles • Triples • Regular an and He Heavy Wo Wooden Bl Blocks ful for attachment to an object as will be discussed further be any of the options described in relation to the embodiin relation to figure 24, below. Head portion 404 includes ments above, or others as will occur to those skilled in the a multi-layer pocket 406 in which RFID transceiver 408 art in view of this disclosure.

Figure 24 illustrates one way in which tag 400 can be affixed to certain assets. In this illustration, object 420 is a part of the asset, such as a strap, rope, sling, cable, or the like. Capacity label 430 is wrapped around object 420 and over tag 400, then is sewn along stitching line 440 using durable nylon thread or the like. The stitching crosses the edge of capacity tag 430 and upper portion 402 of tag 400, thereby affixing both identification tag 400 and capacity tag 430 to object 420. Conventional capacity tags 430 are of a dimension and quality that allows RFID transceiver 408 to be queried from a suitable distance.

Alternative Fabrication Technique An alternative method for fabricating tags 100, 200, and 300 involves injection molding techniques. This process beAll Material Factory Certified gins with resin in pellet form and ultraviolet-resistant dye, Wooden Shell Blocks 3� to 16� each of which is dried using conventional techniques to remove moisture in advance of the injection molding process.

For more Associated Wire Rope & Rigging, Inc. Waterman Supply Co., Inc. In some embodiments, the resin and dye are dried to about information, 8125 Saran Drive, Playa Del Rey, CA 90293 910while Mahar Ave.,embodiments, Wilmington,the CAthreshold 90748 0.01% moisture, in other contact: Ph: 1-800-901-1135 Fax: 310-448-5446 is set at some Ph: 1-800-322-3131 Fax: 310-522-1043 other value less than or equal to 0.05%. The Email: awrrinc@earthlink.net plastic resin Email: and dyewaterman@bigplanet.com are then blended and loaded into a hopFigure 22: Perspective view of an identification tag according to a third embodiment.

Wire Rope News & Sling Technology

August 2006

continued on next page Wire Rope News & Sling Technology August 2014

7137

continued from previous page per for screw injection molding. Of course, in other embodiments, other types of molding will be used as will occur to those skilled in the art in view of the present disclosure.

During the molding process, the dyed resin is injected into a die to form the tag body, including defining the slot, or cavity, and any text and/or symbols that are to appear on information-bearing surface 102. The injection dies in this embodiment are water-cooled, and once the plastic is injected, the dies are cooled and the tag is ejected from the die.

In other embodiments, multi-cavity dies are used to form multiple tags (having the same or different shapes and/or markings simultaneously).

Figure 23: Plan view of an identification tag according to a fourth embodiment.

The tags are then “seasoned” by exposure to greater levels of humidity until their moisture content reaches about 2.7%. In other embodiments, of course, other moisture content thresholds will be used, as will occur to those skilled in the art in view of this disclosure. RFID transceiver chips are then inserted into the slot that was molded into each tag, and the remainder of the slot is filled with epoxy. Additional information to be added to information-bearing surface 102 can be written using hand stamping, vibratory etching, laser etching, or screen printing. Other methods of writing data on the outside of the tag so that it is visible and legible will occur to those skilled in the art in view of the present disclosure.

Testing Tags made according to the first exemplary embodiment

Figure 25: Schematic view of a test configuration applied to an identification tag according to the fourth embodiment.

above have been put through a shot peening chamber 250 consecutive times, placed under a concrete block and jerked out 15 times, then run over with a forklift 5 times, and placed on a chain and dragged behind a vehicle on the highway for over 2 hours. The RFID transceiver in each tag still functioned as intended. Another tag made according to the first exemplary embodiment above was exposed to 65,000 pounds of pressure asserted perpendicular to the large side that includes information-bearing surface 102. Though the text on the tag was somewhat deformed, it was still legible (it was primarily just larger than it had been), and the RFID transceiver still worked.

As illustrated in figure 25, a tag 500 of the form illustrated in figures 23-24 was attached to an industrial-grade sling 510, and a length-wise strain force F was imposed lengthwise on each end of the sling 510. The point at which the tag 500 was affixed to the sling 510 was placed outside the bight 520 in the sling 510, within the protective sheath of the sling 510 on the side opposite post 530. A pulling force of 2F=45,000 pounds was applied, and the RFID transceiver 540 in tag 500 still functioned. WRN

Do you have news that belongs in this publication?

Do you have a product or service you would like to introduce to our industry?

Have you promoted someone in your company?

Tell us about it, and we’ll consider it for publication.

It’s free!

All it will cost you is the time it takes to write it up and send it to us. You might be surprised what a little publicity can do for your business.

Send your news to:

Figure 24: Perspective view of an identification tag according to the fourth embodiment as it is being affixed to an industrial lifting device.

72

Wire Rope News & Sling Technology August 2014

Email: info@wireropenews.com

continued from page 59 seabed by professional sea divers.

“This was a job significantly influenced by the dramatic events that occurred to the wreck, and there was a psychological pressure every day after the accident by the worldwide media,” said Fagioli’s Edoardo Ascione. “It was a unique operation that was followed by millions of people around the world.” $150,000-$750,000: Omega Morga Moves a 1,100-Foot-Long Bridge Crews from Omega Morgan strategically moved the 87-year old Sellwood Bridge in Portland, Ore. from its permanent concrete supports to temporary steel piers to make way for a new bridge to be constructed across the Willamette River. The Sellwood Bridge— at 1,972 feet long, 75 feet high and, 28 feet wide—is among the state’s busiest bridges with 30,000 vehicle crossings each day.

Once it was secured into place, the old bridge in its new location would become a temporary route while the new $307.5 million bridge is built in the original location. The new bridge will open in 2016.

A complication was that it was not a straight-across move. Instead, the east end of the bridge needed to be moved only 33 feet while the west end had to be moved 66 feet. The entire span was also shifted two feet east. Omega Morgan’s team started planning for the project in March 2012, moved its crew onsite on January 2, 2013. The actual bridge move occurred over 12 hours on January 19, 2013.

Both Omega Morgan and General Contractor Slayden/Sundt Joint Venture have successfully used this detour bridge method on other projects. Omega Morgan’s collaboration with the general contractor was critical to proper project planning and public safety.

Only a week was allowed to jack up, move and jack down the bridge. To minimize downtime, the bridge was actually jacked up with traffic on it.

Omega Morgan’s safety manager was included in every phase of project planning to identify any areas of safety concern and collaborate with the contractor’s safety plan.

Devising a strategy to move the bridge in one piece helped Omega Morgan win the contract after showing that it would save time, money and duplication of efforts. Other proposals had suggested expensive and redundant structural features and extensive staging.

The plan involved sliding the aging bridge on skid gear to the north of the

existing bridge and then mounting it on new piers that had been built in the river. The bridge would then become the “shoofly,” or detour, while construction begins on the new bridge.

Engineers used 10 sliding jacks, 40 lifting jacks and a central control system to make sure the move progressed as planned. The truss span was designed as a continuous structure rather than a series of connected spans. This unusual design required the contractor to move the entire span in one piece.

In preparation for the move, crews removed short spans at the east and west ends of the truss span that will not be part of the new detour bridge.

Hydraulic jacks lifted the truss span several inches off the old concrete piers, and then horizontal jacks pushed it on rails along steel translation beams linking the old piers with the detour bridge piers.

The layout of the skid beams and skid track was extremely critical because the track that was up to 1,100 feet apart had to be set on different radii with the same point of rotation.

The bridge was moved using pushing cylinders at each bent. Hydraulic flow was metered so that the cylinders at each bent moved the proper amount.

Prior to the move, the skid track was marked off in tenth-of-a-foot increments from the starting point of the skid beams. The progress of the skid beams at each bent was monitored against an offset table to ensure that the bridge was staying straight and on a radius of the turn.

Prior to the bridge move, temporary approach spans were installed at the west and east ends of the relocated bridge to link Highway 43 in southwest Portland to S.E. Tacoma Street. They will remain in place throughout construction of the new bridge.

The bridge started moving at a pace of about six feet per hour early on a foggy Saturday morning. Dozens of crew members remained on the bridge throughout the move, operating the network of 50 hydraulic jacks that lifted and pushed the bridge on ramps to its new location, and monitoring the truss. During the move crews monitored the pressure gauges and adjusted the flow rates at each location accordingly.

Under $150,000: Barnhart Removes 10 Platforms on Control Tower at Airport Barnhart removed 10 platforms on a control tower at McCarran International Airport in Las Vegas, Nev. Each platform weighed 12,000 pounds and

measured 16 feet long by 19 feet wide by 10 feet tall. All were located 230 feet in the air. With the control cab in place, the tower crane on the project couldn’t remove the platforms.

The outer most diameter of the cab overhung the walls by 18 feet. It was impossible to get the tower crane hook above the center of gravity (CG) of the platforms.

The original plan to remove the platforms was to set winches on the concrete floor slab above, run the line through a hole in floor, rig the line to the platform, and lower it to the ground. But it failed to account for the new architectural façade.

Barnhart presented the tip stick, which was originally designed to tip objects, In this application, the main question was how to secure the platform to the tip stick: Where would the pump sit so that the operator could run the pump in while being able to see the pick and how to prevent the hoses form hanging 230 feet in the air?

Barnhart installed lifting eyes on the control pump and rigged it to the tip stick, allowing the pump to function as a counterweight as well. To assure the operator could see the tip stick, a remote control with 100 feet of cord was installed. This allowed the operator to grab the remote off of the end of the tip stick and stand on the adjacent platform, where he would be able to safely see and make the pick.

The tip stick’s control pump allowed the pick location on the beam to be manipulated. After the connection was made the operator slowly moved the pick point more towards the center of the beam, which is the new CG of the load with the platform attached. The lift director then was able lift the platform off the support bolts and fly the platform to the ground.

Rigging was a challenge because it was impossible to place the tip stick directly above the CG. A moment-resistant hard connection to the platforms was designed, allowing the platform to be picked even if the CG was not below the beam. A portion of the deck was removed and beams were installed over the top of the tip stick.

The safety plan called for crews to access the platforms using ladders from the level above. Workers were required to tie off prior to exiting the control cab using 50-foot retractable lanyards secured to an engineered anchor point.

The lifts were timed to ensure planes were not on the adjacent taxiway.

Wind was an issue; work was stopped continued on next page

Wire Rope News & Sling Technology August 2014

73

Now available with optional self-locking hooks for all lever and hand chain hoist models. From ¾-ton up to 6.3 ton capacity.

continued from previous page if winds exceeded 20 mph. Two 300foot taglines controlled the movement of the tip stick to counter the wind.

The work plan addressed crane setup, boom tip height, tip stick position, swing path, landing zone, platform connection, FAA coordination, access to the platforms, fall protection, fallen worker rescue, and the removal of the last two platforms behind the tower crane. The platform company provide engineering to ensure that the connection was safe, and Dielco Crane Service provided the operated Link Belt HC278. Archer Western provided valuable input to the connection, their carpenters performed the deck modifications and connections, and they also coordinated with other operations and the FAA. The job was completed in less than five working days with a crew of eight. It was performed ahead of schedule, under budget and without any safety incidents.

The Specialized Carriers and Rigging Association (SC&RA) is an international trade association of more than 1,300 members from 43 nations. Members are involved in specialized transportation, machinery moving and erecting, industrial maintenance, millwrighting and crane and rigging operations, manufacturing and rental. SC&RA helps members run more efficient and safer businesses by monitoring and affecting pending legislation and regulatory policies at the state and national levels; researching and reporting on safety concerns and best business practices; and providing four yearly forums where these and other relevant member issues can be advanced.

Spider Lifts Trump to new heights

ONE STOP SHOP HOISTS RIGGING HARDWARE SLINGS

877-LIFT AMH allmaterialhandling.com

74

Spider, a division of SafeWorks, LLC, provided the suspended access solution for the installation of the massive ‘TRUMP’ letters on the Trump International Hotel and Tower in downtown Chicago.

The project scope included the installation of five stainless steel, LED backlit letters to the 15th floor level of the city’s second tallest skyscraper. Weighing an average of 900 lbs, each letter varied in size. Collectively the signage spanned 140 linear feet.

Long-time Spider customer Brand Scaffold rented and rigged two 40ft swing stages powered by Spider’s workhorse SC1000 traction hoists and equipped with walk-thru stirrups for the six-week duration of the project.

Wire Rope News & Sling Technology August 2014

This granted the installer, Poblocki Sign Company, safe and secure access to the façade for the sign installation.

Additionally, a monorail trolley beam was installed at the 17th floor level to enable an SC1500 material hoist to be mobilized and repositioned as needed when lifting each of the massive letters safely into place.

When considering the structure’s unique rigging challenges, Spider collaborated with contractors to temporarily remove a section of windows on the 17th floor and anchor the outriggers directly into the concrete floor

slabs, two stories above the installation site. A staging area was established on the ground level to store and assemble the swing stage equipment prior to the installation, and a portion of Chicago’s famous Riverwalk below the installation site was closed to pedestrian traffic throughout the project’s duration to ensure public safety.

“As a long-time customer of Spider equipment, we couldn’t be happier with their equipment’s ease of use,” commented Mark Eesley, Installations, Service and Building Manger with Poblocki Sign Company. “Even with multiple rigging changes, all trades involved on this complex project worked seamlessly together to safely install the signage according to the tight timeline.”

It’s who you know

Looking for a product or service related to wire rope and slings?

Find the right company

fast!

Go to: www.wireropenews.com then click:

Harrington Hoists, Inc. releases AL Series (Ex) Certified Spark Resistant and Lube Free Air Hoists

Harrington Hoists, Inc. has introduced their new AL Series air hoists which are certified spark resistant to the EU ATEX Directive which is a stringent European safety standard for spark resistant compliance in industrial hoists.

The AL series hoists are designed to be used in explosive atmospheres that

compact; available in ¼ through 5 Ton capacities with either pendant, cord or twist rod control for precise load control.

Standard features include a patented heavy-duty disc brake, reliable vane motor for smooth operation and controlled travel, bearing supported planetary gearing system and upper/lower limit switches. The hardened steel load chain and the hook and latch system are plated and blue-chromated for corrosion resistance and extended wear.

Harrington Hoists, Inc. is a Kito Group Company located in Manheim, PA, Elizabethtown, PA and Corona, CA and is a leading supplier and manufacturer of electric and air powered chain hoists, electric wire rope hoists, lever hoists, manual hand chain hoists, push and geared trolleys, overhead cranes, crane accessories and a full line of replacement parts.

Van Beest has developed a new type of shortening clutch

With this type of clutch, you do not need an extra leg of chain for your shortening clutch, so less components are required at the master link. You simply attach the clutch at any point along a sling leg to shorten the sling length. According to a company release, you can move it up and down the chain to adjust the length exactly where and how you prefer.

This clutch is available from stock for diameters 8 and 13 mm grade 8 and

grade 10 chain.

Other sizes will be manufactured shortly. To learn more about this, and other Van Beest products, visit their website at www.vanbeest.com. For more information including details of the clutch, please contact sales@vanbeest.com.

Stratos® Winch Pro with Dyneema® offers unique benefits to the forestry industry

Specially designed forestry ropes manufactured by Teufelberger Company and made of Dyneema® fiber provide Austrian forest operators with key benefits: weight savings, ease of handling, lower risk of injury and long life Despite continuing mechanization, harvesting timber places high demands on lumberjacks and materials. continued on next page

require features that reduce the risk of spark to ATEX level (Ex) II 2GD c T5 IIB T100°. These hoists are also suitable for applications where a clean environment is a necessity because they can operate completely dry leaving no lubrication in the exhaust air which is a requirement in certain food, chemical and pharmaceutical industries, according to a company release. AL Series hoists can also operate with oil, if the application permits, for longer vane life.

AL series hoists are lightweight and Wire Rope News & Sling Technology August 2014

75

One STOp SHOp HOISTS RIGGInG HARDWARe SLInGS

877-LIFT AMH allmaterialhandling.com

76

continued from previous page This also applies to the ropes used in hauling and winching the timber.

In Austria, both the Archbishop office of Vienna and Ernsthof Forstverwaltung are among a growing number of forest holders who rely on fiber as opposed to steel wire ropes for reasons of ergonomics and safety. Between them, the two harvest around 25.000 m3 of timber annually and both are recipients of the prestigious State Award of Role Model Forest Management, granted by Austria’s Federal Ministry of Agriculture, Forestry, Environment and Water Management.

For hauling the logs, both forest holders have been using advanced winch ropes made with Dyneema® for more than five years. Dyneema® is DSM’s brandname for its extremely tear and splice resistant fiber of high-modulus polyethylene (HMPE). The typical application comprises a tractor with fixed hauling equipment, including a rope winch providing a traction force of up to 10 tons.

The patented forestry ropes are manufactured by Teufelberger Company and marketed under the STRATOS® Winch Pro brand. To avoid the core rope that bears the traction force becoming frayed, particularly on rocky terrain, Teufelberger covers the Dyneema® core of its STRATOS® winch ropes with an especially tight Dyneema® braid. With this rope design, even the medium-sized 15 mm diameter STRATOS® Winch Pro rope (12 mm core + 3 mm mantle) is rated for a minimum break load of 160 kN and a splice resistance of 150 kN, according to a company release.

STRATOS® Winch Pro ropes have proven to be an extremely rugged, lighter and safer alternative to conventional steel wire ropes. A key argument is their lower weight: “It makes a big difference in time and labor, whether two or three lumberjacks must pull a 100 kg steel rope uphill, or whether the same work can be done with a fiber rope that weighs only 12 kg.” says Alfred Steiner from the Feistritzwald district management of the Vienna Archbishopric.

With these fiber ropes, research shows timber can be harvested up to 20% faster, increasing productivity.

Furthermore, forest engineer Martin Exenberger from Ernsthof Forstverwaltung emphasizes the higher safety in case a rope should unexpectedly fissure: “Steel ropes, when torn apart, will snap out of control, whereas the synthetic rope will sim-

Wire Rope News & Sling Technology August 2014

ply fall down without any spiky or broken wire strands. The risk of injury is significantly reduced.” Moreover, experience has shown that the

winch ropes with Dyneema® last two or three times as long as the former steel ropes.

Erich Rührnößl, development engineer at Teufelberger in Wels, Austria, highlights the company’s many years of collaboration with DSM Dyneema on several rope projects. “Before introducing STRATOS® to the market, we executed comprehensive abrasion, breakage and tensile strength tests in order to make sure the fiber ropes will at least provide the same performance that our customers expect from wire ropes – however at significantly lower weight.“ Teufelberger supports its forestry customers with tailor-made accessories, such as special rope end bonds that prevent the winch rope from being pushed off by twitch hooks, thus effectively protecting the rope cover along the entire length of the rope.

Patented splice end bonds permit fast on-site repairs, which is of major importance particularly at low temperatures in winter. For its STRATOS® Anchor guyline rope developed for yarders, the company was honored with Austria’s State Award for Innovation.

Dyneema® is 15 times stronger by weight than quality steel and up to 40 percent stronger than aramid fibers. Its minimum break load excels that of steel wire and other synthetic fibers. Dyneema® floats on water, is resistant to moisture, UV irradiation and chemicals, and has been OEKOTEX® certified. Its application potential is therefore more or less unlimited, including but not limited to: fine yarns for sporting goods as well as light body armor, winches and nautical ropes.

fore returning to school.

For more information or employment opportunities at Chant Engineering, visit the website @ www.chantengineering.com.

J. Robert Sims, Jr. begins term as President of ASME

Philip Chant, President of Chant Engineering & Victor Andersson

Chant Engineering offers summer internship for engineering student from Sweden

Chant Engineering of New Britain welcomes Victor Andersson from Sweden for a summer internship. Victor is currently on summer break from Chalmers University of Technology in Sweden where he is planning on graduating in 2017 with a Master of Science & Mechanical Engineering degree.

Chant Engineering currently partners with Talurit AB of Sweden where Victor’s father, Thommy Andersson, is the managing director.

“With Victor following in his father’s footsteps, we thought it would be a great learning experience for him to get some hands on experience here in

the United States to compare it to his manufacturing experience in Sweden”, says Philip Chant, President of Chant Engineering.

“It’s also a fantastic cross-cultural experience for the employees of Chant, to work side by side with Victor”.

Victor doesn’t mind giving up his summer break, as he says, “I’m here for four weeks, so I only have 2 more to go and I’m learning a lot of new things every day. It’s a great opportunity to take what I’m learning in college and apply that knowledge in the field.” He also says, “even though the American culture is different, we are a lot alike”.

Victor plans on a trip to Florida and a quick trip to New York before returning to Sweden, then perhaps squeezing in some fishing, hunting and sports be-

J. Robert Sims, Jr., senior engineering fellow at Becht Engineering Co. Inc., Liberty Creek, N.J., has been elected president of the American Society of Mechanical Engineers (ASME) for a one-year term beginning July 2014.

ASME issued the announcement at the Society’s 2014 Annual Meeting, which concluded June 11 in Portland, OR. Sims becomes the 133rd president of ASME, an organization of 130,000 members worldwide.

He has been an active member of ASME for more than 33 years and is a recognized authority on risk-based technologies. At Becht Engineering, Sims provides consulting services in failure analysis of pressure equipment, pressure vessel and piping system design and analysis, mechanical integrity evaluation and Fitness-For-Service analysis, and the design of high pressure oil and gas well equipment.

Prior to joining Becht Engineering in 1998, Sims worked for more than thirty years with Exxon (now ExxonMobil), the last ten years as a pressure equipment specialist with worldwide responsibility for standards and improving equipment integrity.

Sims is a fellow of ASME and has served in a number of leadership roles, particularly in areas involving the Society’s codes, standards and certification processes. He is the recipient of the Society’s Dedicated Service Award (1995), the J. Hall Taylor Codes and Standards Medal (2004) and the Melvin R. Green Codes and Standards Medal (2006).

Sims earned his degree in mechanical engineering from Vanderbilt University and served two years as a commissioned officer in the United States Navy.

LGH Adds New Rental Representatives

Lifting Gear Hire (LGH) recently hired Jason Rios as a new Rental Representative for the New York Metro Area market and Jim Meyer for the Iowa market.

Jason comes to LGH with over 15 years of sales experience, and was in continued on next page

Wire Rope News & Sling Technology August 2014

77

continued from previous page the US Marines for 14 years. Jason has a great understanding of customer needs in the construction industry. Jason is eager to demonstrate who LGH is and how LGH can help you with your equipment needs. In turn, he is ready to help build and develop his territory.

Jim comes to LGH with over 20 years of sales experience. He comes from a background of similar tools and customer base. With his prior contacts he will have the advantage of a quick education, referral opportunities and will know what customer loo for and need in equipment. Jim has a passion for customer service and is excited to build his territory.

Founded in 1990, Lifting Gear Hire (LGH) is the United States’ largest single organization devoted exclusively to the provision of lifting and moving equipment for rent and sale. LGH provides hoisting, pulling, jacking, rigging, material handling and safety equipment available for immediate and safe use. LGH’s mission is to offer expertise in the rental of the safest and most reliable hoisting and rigging equipment to build and support a better America.LGH – Puts Safety First. www.lgh-usa.com.

Loos & Company Expands Sales and Marketing Team

Loos and Company is excited to announce the hiring of Meghan Buisson as their new Marketing Assistant. In this role, she will be responsible for contributing to the overall marketing strategy as the company looks to ex-

Matthew Conway

pand their presence in stainless steel wire, cable, and cable assembly markets.

Meghan received her undergraduate degree in Communications from Bryant University. She comes to Loos and Company with a strong background in the marketing and communications fields. In her most recent role, she was responsible for developing and maintaining marketing content, monitoring social media, and generating press releases, among other duties.

“I am thrilled to join the Loos and Company team as their Marketing Assistant,” said Meghan. “I am confident my expertise will allow us to continue to provide our customers with the information they need to design solutions using Loos and Company’s products.”

Please join us here at www.loosco. com in welcoming our newest team member.

product management, and direct sales.

Chant Engineering Co. is a global diversified engineering company that designs, manufactures, services and calibrates testing machines, systems and related accessories for worldwide industrial and military customers.

Chant is the Authorized North American distributor for TALURIT AB products and Friedrich Höppe. For more information on Chant Engineering, visit www.chantengineering.com.

Do you have news that belongs in this publication?

Chant welcomes Matthew Conway to their expanding Technical Sales Department

Chant Engineering Co., Inc. is pleased to announce the addition of Matthew Conway to the Chant team.

Matthew comes to Chant with over 20 years of experience.

Patrick Shire, Vice President of Sales and Marketing for Chant Engineering, said “As Chant continues to grow, Matthew will be relied upon to foster new relationships as well as calling on our existing customer base. His diverse capital equipment experience will be an invaluable asset to our technical sales team. I look forward to seeing him grow into his new role.”

Prior to joining Chant, Matthew worked in many facets of capital equipment providers including; field service, technical support, customer and service personnel training, applications, Meghan Buisson

78

Wire Rope News & Sling Technology August 2014

Do you have a product or service you would like to introduce to our industry?

Tell us about it, and we’ll consider it for publication.

It’s free!

Send your news to:

Email: info@wireropenews.com

Advertisers Index HELPING US IN

of Wire Rope News

Please turn to the pages indicated below for a detailed view of advertisers’ products or services.

Accutech ........................................................57

Peerless Chain ................................................15

All Material Handling .................................74, 76

Premier Wire Rope ............................................3

Allied Power Products .....................................20

Promec . .........................................................54

Associated Wire Rope & Rigging, Inc. .... 19, 49, 58

Ronstan ..........................................................37

Buffalo Lifting and Testing ...............................70

Sea Catch .......................................................81

C. Sherman Johnson Co., Inc. . .......................44

Scotload UK Ltd. .............................................57

Caldwell Company, Inc. .......................14, 46, 84

Skookum ........................................................56

Chant Engineering Co., Inc. .............................23

Slingmax Rigging Products ...............................4

Chicago Hardware ..........................................12

Slinguard Protectors . ......................................48

Cleveland City Forge . ......................................29

Southern Wire .................................................22

The Crosby Group . .....................................2, 51

SPS ................................................................21

Distributor Computer Systems . .......................71

Strider~Resource . .........................................13

Downs Crane & Hoist Co., Inc. ........................71

Suncor Stainless, Inc. ............................... 42-43

Elite ................................................................45

Talurit .............................................................23

Engineered Lifting Tech ...................................67

Taylor Chain Company ....................................75

Esmet .............................................................33

Terrier Lifting Clamps ......................................31

Gaylin International Co. Pte. Ltd. . ....................83

Van Beest BV ..................................................11

Harrington Hoists and Cranes...........................61

Vanguard ........................................................39

Ken Forging, Inc. .............................................28

Weisner ..........................................................30

KWS, Inc. .......................................................55

Wichard, Inc. ..................................................65

Landmann ........................................................6

Windy Ridge Corporation ................................55

Lift-All ............................................................53

Wirop Industrial Co., Ltd. . ...............................25

Lubrication Engineers, Inc. ..............................41

Yale Cordage, Inc. ...........................................32

Morse-Starrett Products Co. . ..........................40

Yoke Industrial Corp. ...................................5, 27

Muncy Industries ......................................35, 50

Wire Rope News & Sling Technology August 2014

79

POSITION AVAILABLE Bridon’s mission is to be the Global Technology Leader in the manufacture of demanding rope applications and the customer’s first choice solutions provider. As a result of our continued effort to remain the industry leader, we are seeking qualified candidates to join our team. Bridon offers a comprehensive compensation and benefits package. Interested candidates may apply by sending a resume and salary requirements to dhudak@bridonamerican.com.

Position: District Sales Manager in the Gulf Coast Region This position is responsible for promoting, selling, and securing orders from existing and prospective Oil & Gas and Crane customers through a relationship and technical knowledge based approach. Bridon is known worldwide for superior quality and excellent product service. The successful candidate will articulate these strengths to extract maximum value for premium Bridon brand wire rope. The candidate will develop strong relationships with existing customers and active account prospecting where market share opportunities exist; generate new business at both existing and new accounts by leveraging our product capabilities and technical expertise.

The successful candidate will have knowledge of the Oil & Gas production and servicing business with at least 3 years’ experience in sales roles with a demonstrated track record of positive results. In addition, the candidate shall have experience working with distribution, strong mechanical aptitude, troubleshooting skills, as well as excellent communication skills – both oral and written. A technical degree is preferred.

Travel will be required 50% -70% of the time.

International travel may also be required. Ideal candidate would be centrally located within the region or willing to relocate.

ment opportunities to minorities, females, veterans, disabled individuals, as well as other protected groups.

KULKONI, Inc, a Houston based wholesaler of wire rope & rigging/lifting products, is looking for a dynamic outside sales representative.

Successful candidates will have industry experience & be self-motivated to grow & excel with us in today’s competitive market. Extensive travel will be required. You will be tasked to service and maintain existing relationships, as well as develop new prospects into accounts.

Excellent verbal, written communication, & presentation skills are required. Kulkoni offers a comprehensive health & benefits package plus a matching 401k plan. Please send your resume to HR@kulkoni.com. Kulkoni, Inc. is an EOE.

Outside sales representative needed for a well established distributor of wire rope, rigging hardware, chain and related industry products, located in Central Arkansas. The qualified individual will possess industry knowledge and the ability to develop new accounts and grow existing accounts. Our company offers a competitive salary, bonus structure and benefits package. If you are qualified please e-mail your resume with salary history to: Reference Box12-01 on subject line, and reply to info@wireropenews.com.

Marine industrial rigging shop looking for CDL driver and rigger experienced only must be willing to work in labor intense environment. Mechanically inclined. Contact John at 508-993-0070.

Southern Weaving is recruiting for an experienced sales professional to serve our sling web market. The Sales Manager position will be based at our location in Greenville, SC; however, up to 70% travel is anticipated. Ideal candidate will have a college degree and at least seven years relevant industry experience.

To learn more about our company, please visit www.southernweaving.com. Interested candidates should email resume and salary requirements to jobs@southernweaving.com.

Please include SALES in the subject line.

Southern Weaving provides equal employ-

80

Company: Southern Wire, a leading wholesaler/distributor of wire rope, slings, chain, and fittings is expanding its sales force.

We are seeking Inside Sales Representatives for the Memphis, TN area. We offer a competitive base salary and commission program. Our excellent benefits package includes medical, dental, life, disability, paid vacation, and 401K. Please visit company website: www.houwire.com.

College degree preferred - Industry knowledge a must. Send resume in confidence to: marketing@southernwire.com or Fax# 662893-4732. *No calls please* Muncy Industries, LLC, has been providing quality wire rope fittings, lifting hardware, and machines for over 60 years. Originally based out of Pennsylvania, we have recently opened a second location in Lafayette, Louisiana. Muncy Industries is seeking an individual with experience in the wire rope industry to help lead the sales team in our Louisiana location.

Requirements include: • Knowledge of the wire rope industry or related industry in the gulf area is a must.

• Excellent written and verbal communication skills.

• Team player, good with people.

• Must be able to set and attain goals in a timely manner.

• Proficiency in Microsoft Word, Excel, and Quick-Books.

We offer competitive wages alongside an excellent benefits package including 100% medical, life, disability, and 401K. Contact us via e-mail: pwhite@muncyindustries.com or fax: 570-649-5850.

Wire Rope Industries, one of the leading manufacturers of premium ropes with more than 125 years of experience, is opening a regional sales rep position to support the growing business in South/Central USA. We are looking for a dynamic candidate with experience in the lifting industry and a proven ability to excel in competitive environments.

Strong personality, focus, drive, and the ability to develop accounts in a fast and sustainable way are required. We offer competitive compensation, industry-leading training, and opportunities for growth. If you are interested in joining the leading innovators in the premium market, please e-mail your resume to careers.industrial@gmail.com.

Company: Nelson Wire Rope Corporation Description: Established in 1979 in Hatfield, Pa, Nelson Wire Rope Corporation is a leader in wire rope fabrication and product distribution. We offer a wide array of products for the lifting, towing, construction, traf-

Wire Rope News & Sling Technology August 2014

fic control and other industries.

Location: Hatfield, PA Employee Type: Fulltime Industry: Manufacturing, Wire Rope and Sling Industry Job Title: Outside-Inside Sales Required Education: Industry experience, degree preferred Required Travel: Frequent Day Trips Other: Local Candidates Only Interested candidates should e-mail resume to: nwrjobs@gmail.com.

Job Duties and Responsibilities: • Aggressively identifies and contacts prospective customers by phone and on-site visits. Ability to conduct sales presentations of company products or services while on site.

Plans effective strategies to capture new business. Proven ability to generate new sales.

• Provide inside customer service and sales.

Skills and Qualifications: • Excellent customer service skills; strong written and verbal communication skills, outgoing personality, team player.

• Effective time management, organization and multi-tasking skills.

• Proficient in Microsoft Word, Excel, Outlook.

Education and Experience: • Minimum of three (3) years experience in an Outside sales role, and five (5) years experience in Inside Sales/Customer Service experience.

• Knowledge of wire rope, crane cable, rigging, construction or related industry.

Inside wire rope sales representative: 90+ year family owned business is looking for an experienced inside Wire Rope representative, to replace retiring veteran salesman. Candidates must be reliable, honest, strong work ethic, and demonstrate good communication skills. Our company provides excellent compensation and benefits to our team members, including Paid vacation, holiday, and sick leave, 401K Retirement plan with matching, excellent insurance benefits - Medical, Dental, Vision, RX, Short Term Disability, Life Insurance. M-F. office hours.

Drug free workplace.

Please reply to: Attention: Cherise, Rasmussen Wire Rope and Rigging Co. Inc. 415 south Cloverdale Street, P.O. Box 81206 Seattle, WA 98108, Phone: 206-762-3700, Fax: 206-7625003, e-mail: Cherisem@rasmussenco.com.

Certified Slings & Supply, Florida’s largest family owned rigging, contractor and industrial supply company is seeking experienced sales representatives for our Florida territories.

The suitable candidate will be aggressive and detail-oriented with experience in selling overhead lifting, load securement and fall protection equipment along with other contractor supplies and have a proven successful sales history.

Our 53-year family-owned company provides excellent benefits to our team members including medical insurance, holiday and vacation pay and 401(k) with company match.

If you share our core values and the experience we are looking for we look forward to hearing from you. E-mail your resume and salary requirements to Attention Team Member Relations at csi@certifiedslings.com or fax to 407-260-9196.

Our Purpose: To grow through challenge and opportunity ‘with passion’ while benefitcontinued

ing team members, customers and vendors.

Our Core Values: Service, Quality, Team, Commitment, Communication, Integrity, Respect. Our Mission: We will be the most trusted and respected company in rigging, overhead lifting, load securement and contractor supplies in the world. Please visit our website at www.certifiedslings.com. EOE/AA/ MFDV. Drug Free Workplace – Drug testing required. Florida Locations include: Orlando, Miami, West Palm Beach, Fort Myers, Tampa and Ocala.

Fabrication manager/customer service.

Work in a family oriented business with an opportunity to earn part ownership. Need someone 35-55+ years old who started at the bottom and looking to finish at the top. Need hands on splicing experience, lifting rigging experience, test bed knowledge, able to direct small growing crew. Basic computer knowledge. Willing to train and mentor young employees. Top wages and benefits for the right individual. Problem solver that our customers can depend on. Honesty and integrity a must. Call Chuck Farmer, President, Rouster Wire Rope and Rigging, Inc., 304-228-3722, in confidence.

Philadelphia, PA Wire Rope & Fabrication shop has inside customer sales/service position. Experience in rigging or crane industries a plus. Contact us via e-mail: hjs_ess@ hotmail.com or fax: 610-687-0912.

Looking for sales professional. Comprehensive understanding of wire rope, chain, nylon, and fall protection preferred. Sales experience required. Competitive salary plus commission.

Benefit package included. E-mail resumes to shane.horizoncable@coxinet.net.

Leading manufacturer of below the hook lifting devices seeks a mechanical engineer who has experience with designing below the hook lifters. Experience with motorized control systems is a plus. Excellent working environment, compensation and schedule all

in a fantastic, southern coastal area! Please send resume to Tandemloc, 824 Highway 101, Havelock, NC 28532, sandy@tandemloc.com or call 252-463-8113.

Web and Round Sling Dept. Manager; Arctic Wire Rope and Supply in Anchorage Alaska is looking for an experienced person to run a small but active sewing and round sling department.

Must be accomplished at sewing and teaching others how to fabricate multiple ply and width web slings, working with a round sling machine and adapting to ours. Must be comfortable with non-standard / custom orders.

Pay is $18-22/hr DOE, major medical, 401k with 8% company match. Winters can be cold and long, should enjoy playing in the snow if possible, no city or state tax and you get a yearly permanent dividend from the State after one year of residency. E-mail resume to accounting@arcticwirerope.com.

Sales manager needed for Chicago market.

Must have strong understanding of wire rope, chain, hardware. Must be able to establish goals and achieve desired results. Computer literate, minimal travel. Salesforce knowledge a plus. Competitive salary and benefits. Reply to box 11-4, care of Wire Rope News, 511 Colonia Blvd., Colonia, NJ 07067.

Texas Wire Rope Company expanding inside sales department. Individuals must have a strong technical, mechanical and basic mathematical aptitude, including basic computer knowledge. Selected candidates must be quality conscious and able to handle multiple tasks. Previous experience in the industrial supply market is necessary. We offer a drugfree, results-oriented work environment with excellent wages and advancement opportunities. Resumes received confidentially at wremployment@gmail.com.

Established wire rope distributor in North America is expanding into crane/container rope and fabrication. We are looking for an

(E&E). DSM’s strategy, Vision experienced individual thatnamed can assist in 2010 - Building on Strengths, focuses formulating a marketing and business plan.

This position will eventually a sales on accelerating profitableevolve and toinnovamanager or general manager. Fax your retive growth of the company’s specialties sume in strict confidence to 330-452-2331 atportfolio.

Market-driven growth, tention Kris Lee or e-mail to klee@afdindusinnovation and increased presence in tries.com. emerging economies are key drivers of

HELP WANTED this strategy. The group has annual Fast growing Billings Montana industrial sales of over EUR 8 billion and employs supply and rigging shop seeks experienced rigsome worldwide.

DSM ger and22,000 wire ropepeople assembler.

Must be familiar with all aspects rigging shop operations.

Eranks amongof the global leaders in mail resume to bjones@gotbolts.com.

many of its fields. The company is headquartered in the Netherlands, POSITION WANTED with in Europe, Asia, Africa Our locations client requires a part-time Bookkeeper (1-2 to assist them with an onand days/week) the Americas. going temporary assignment. This position About W.L. Gore & Associates, Inc. could become permanent for the right candiW.You L.will Gore & Associates, Inc., a date. be responsible for Bookkeeping, Accounts Payable entering, provider setting up inventechnology solutions with tory, filing, organizing and some nearly $2 billion in sales and administramore than tive duties. You must be able to thrive in a 7,000 associates, specializes in team environment and also work well alone. f l The u o r successful o p o lFax: y m ecandidate r i n n o 396-4215 vfor a tthis i o n role s t hwill at (1-732) have excellent knowledge Simply improve the quality of of life.

OverAccountits 47continued year history, Gore has applied its world-renowned expertise with membranes, fibers and laminates to thousands of products in performance-

Wire Rope News & Sling Technology August 2014 54

81

Wooden

driven energy filtrati more th headqu USA. F www.go Dyne of Roya All propert

Cable Awar

Godd Peacht

CLASSIFIED

continued from previous page ing. Strong written and oral communication is a must. To be considered for this great opportunity please e-mail us at employmentjoboffer9@gmail.com.

Outside sales professional with 20+ years experience seeking full time position. Willing to relocate. Reply to mrrigging@gmail.com.

Experienced Wire Rope Sling (Flemish) fabricator needed. CWR Hawaii is seeking a worker with knowledge and hands-on ability to fabricate wire rope and chain assemblies.

Full-time, 401k, vacation, insurance, and other benefits. Relocationg cost can be negotiated.

If you are interested in working for our company, please e-mail me at allen@cwrhawaii.com or call me at 808-843-2020.

Loos & Co., Inc. manufactures stainless and nickel alloy wire and cable products. We are seeking an Engineer with experience in metallurgy, preferably with a wire drawing background. Must have a BS in metallurgy, or substantial industry experience in wire or specialty metals industries. Medical grade alloys knowledge is a definite plus. We offer competitive wages with a comprehensive benefit program. An EEO/AA Company.

Visit our website at www.loosco.com.

Forward resumes to careers@loosco.com.

Former Division-Product Manager, Regional Outside Sales Manager desires southeast territory to manage and solicit accounts in the wire rope, chain, fittings, and related industries. Over 25 years experience including District Manager, Bethlehem Wire Rope, Regional Manager, Wire Rope Ind Product Manager, Rud Chain, Inc. Interested parties reply to M.E. (Mike) Givens mike90309@aol. com, ph 256-476-7700.

West Coast Wire Rope and Rigging is looking to hire experienced riggers. Please send your resume to: 7777 7th Ave. South, Seattle, WA 98108, attention manager.

SEEKING MERGER Rigging products company seeks merger: A nationally-prominent rigging equipment manufacturer seeks to grow through merger with similar company. Strong brand recognition and extensive cargo control, wire rope, chain and synthetic sling production capabilities have fueled our growth. We now seek a merger partner so that we may take advantage of economies of scale and get to the “next level”. The business is not for sale; merger inquiries only. Principals only please, no brokers. Respond in confidence to rigmerger@ gmail.com.

or tommy.lee@southernweaving.com.

Sunwood Inc., manufacturer of nets, slings, etc. since 1986, (formerly known as Fl. nets & slings supply) is expanding nationwide & looking for ambitious independent reps in US and Canada. Check our webiste: www.netsandslings.com before contacting us. We offer several protected territories without any restriction of house accounts. Generous commission paid when order is shipped (not when $ collected). Call 954-788-7144 or e-mail: sunwoodfl@aol.com.

Sales rep wanted for an established manufacturer of labels and sling tags. We are looking for a sales rep that currently calls on sling makers and rigging companies and is familiar with the business. Etiflex is a registered trademark and manufactures custom sling tags for synthetic and wire rope slings and has an excellent reputation in the field.

We advertise in trade journals and exhibit at industry shows to generate brand awareness.

Please contact us at info@etiflex.com or call 866-ETIFLEX for information.

Manufacturer Represtentatives for Lifting Equipment & Accessories wanted by ALL MATERIAL HANDLING, Inc. Territories are now available and supported by our 4 USA Warehouses where our highly competitive and top quality products are stocked to the roof.

Partner with us as we continue to grow market share. Check us out at www.allmaterialhandling.com and reach us at 877 543-8264, or e-mail peter@allmaterialhandling.com.

Well established manufacturer of wire rope assemblies seeks manufacturer representatives for most major U.S. and Canadian markets. Visit our web site at www.thecableconnection.com. Please contact ray@thecableconnection.com or call Ray at (800) 851-2961 PRODUCT LINES WANTED Merit Sales, Inc. (Manufacturer Representatives) is looking for rigging related lines to compliment the manufacturers we currently represent. If you need sales people in any of our states (AL, AR, FL, GA, LA, MS, NC, OK, SC, TN, TX, VA) please contact. We also have 2 regional warehouses available in the Atlanta area & Houston. e-mail: johng@meritsalesinc.com or call Johnny at 713-664-7723.

PROFESSIONAL SERVICES Dragline range & depth extended using gravity return. Contact Nielsen by fax for details (fax) 904-342-0547 EQUIPMENT WANTED Wanted: Used test stand for manual hoists static testing, up to 10-tons. Contact John Gideon at jwg@meritsalesinc.com or Phone 770-266-5700.

FOR SALE New wire rope: 400 ft. 2-1/4” Wireco (St. Joseph, MO. / USA) 7-Flex bright IWRC $4.95/ ft. = $1980.00. F.O.B. Longview, WA. Please contact L.G. Isaacson Co. - Charlie Isaacson ph.(360) 754-6020.

“Nets & slings” equipment (used) are offered at bargain prices (best offer will take it): Singer- 6 Sewing machines H.D. w/benches.

Kiwi- Web printing machine, complete setup. Tinius Olsen- Testing machine 60K. Call us at 954-788-7144 or e-mail: sunwoodfl@aol. com.

3/16" Campbell Chain L3x51 Links- Zinc; 3200 pieces 48" with 5/16" S Hook; 1100 pieces 15" with 5/16"x2.5" O ring; In NC. Best Offer abarker@rmcord.com, 800-342-9130 x 124, Andy.

New wire rope 1-1/8” drill line 5000 ft. 6x195 BR RR IFWV $30,000 Aud & freight. Reply to Brayd Gross, Alpha Rigging SErvice, 11-13 Gerberte Court, Wurruk, Victoria, Australia, 3850. Phone 0011+61351461088. E-mail: bgalpha@bigpond.net.au.

Crosby 7/8” G213 LPA shackles. NEW! 205 pieces available. Contact Gary Lee @ 1-800844-3517. Fax 251-456-8860.

Impacto Cable cutters and parts available from Windy Ridge Corp. Tamworth, NH, USA. 800-639-2021. Fax 603-323-2322.

New Wireco: 6 X 26 construction, 7/8” X 5,700’ - 1” X 1,000’ ¾” X 3,500 – 5/8” X 3,000’ – 1-3/8” X 1,350’ – 1-3/8” X 1,500” – 7/16” X 5,000’ – 1” X 300. All New. Also available: new assorted Esco shackles.

Call Tom at 541-378-7006 for pricing and details.

HARDWARE FOR SALE 12 new galvanized open spelter sockets for sale $125 each. Sockets are for 1” wire rope, have 2” pin and are marked “108 YX9826 CE”. Contact Jim at jkuly@comcast.net.

Overstocked inventory for sale, 1-3/8” Shackle, WLL 13½ ton, galvanized, round pin, import. Super savings. Sold in minimum lots of 50 at $9 each. Eric Parkerson, Certified Slings, 407-331-6677.

EQUIPMENT FOR SALE Reel-o-matic cable reel model RS/2M11.

Capactiy 2500 lbs., 1.5 HP drive, 220V 3PH machine $1500 - Call Shlomo 973-523-7760.

National swage 1000 ton press. Excellent condition, including most dies up to two inch, $110,000. Barry, Bilco Wire Rope & Supply Corp., 908-351-7800 or blemberg@bilcogroup. com.

Well established and growing manufacturer and distributor of overhead lifting and material handling products is seeking acquisitions to continue to power our growth. We are looking for rigging shops and hoists and crane distributors in the upper Midwest. Principles only please reply to rfisk@wiscolift.com.

Wanted 600t wire rope swaging press complete with dies in good order, please contact Tony@cman.co.nz, or Tele 0064 3 366 1528.

Wanted: used wire rope cable, sizes 1-1/8”, 1”, and 7/8”. Please call for pricing. (740) 452-5770.

150 ton, Wirop C-type hydraulic swaging machine for sale. Brand new, with 4 sets of dies. $19,500 or B/O. Call Oscar at 909-548-2884.

REPS WANTED Southern Weaving is seeking Independent Sales Representatives. We prefer a sales professional who currently calls on sling makers and rigging companies and is familiar with the industry. Check us out at www.southernweaving.com. For more information, contact Tommy Lee, Sales Director, at 864-240-9372

PROPERTY FOR SALE Industrial Warehouse Opportunity: Atlanta area. 20,000 sq.ft. with 2 dock height bay. First floor 1600 sq.ft.; Offices, 2nd floor, 3 bedroom/1 bath apt. or office, 1600 sq.ft. Central AC/heat.

Total land: 2.24 acres near I-85, sale/lease/option. Only $355,000 cash. E-mail: matdpurch@ yahoo.com, tel. 706-599-3270.

Wire Rope Grips for proof test machines.

Sizes: 1-1/2”, 2”, 2-1/2”. Load cells & digital read-outs also available. Call Joe Roberts (912) 964-9465.

82

Wire Rope News & Sling Technology August 2014

1-800 ton Esco, 1-500 ton National, 1-500 ton Esco, 1-350 Esco. 713-641-1552.

Prooftesters for sale. Capacities from 20,000 lbs. to 3,000,000 lbs. Call Joe Roberts (912) 964-9465.

08/14

CW_AD_WRN_091713_Layout 1 9/17/13 1:24 PM Page 1

ORDER BY NOON NEW

SHIPS THE SAME DAY Designed and manufactured to ASME B30.20 and BTH-1.

Caldwell quality. Guaranteed.

Our expanded INSTOCK* program has many items available for same day shipment. Call us at 800-628-4263 to place your order now. Orders placed after 12:00 PM (CST) ship the next business day. *Not all sizes are available for same day shipment.

The Caldwell Group • 5055 26th Ave. Rockford, IL 61109 • 800.628.4263 • caldwellinc.com