1 minute read
Light switch master-model making
from Cast It
Advertisement
The required amount ≈20-30 gr. Cure time was ≈30-40 minutes.
The resin is originally bright dirty yellow. It was dyed to green.
All samples made with Test 1 form. Test 4. Foil and wire were placed into cast.
Sensor switch only with touching back side of the cast.
Foil gave nice effect of reflection. Test 5. In this example, a single wire was placed in the cast. Unfortunately, the sensor has not turned on. The wire was not close enough to the top surface of the casting.
The experiments with wire were not effective.
The required amount ≈20-30 gr. Cure time was ≈30-40 minutes.
The resin is originally bright dirty yellow. It was dyed to blue with glitter.
The samples made with Test 3 form.
The rivet that working perfectly with sensor wad placed into cast.
The example fully provides the idea of sensitive textured light switch.
The side where supposed to be gate looks rough.
