Casting the form
Test 5. In this example, a single wire was placed in the cast. Unfortunately, the sensor has not turned on. The wire was not close enough to the top surface of the casting.
TEST 4 & 5. MG-EPOXFLASH. FINDING THE WAYS TO CONNECT SENSOR The required amount ≈20-30 gr. Cure time was ≈30-40 minutes. The resin is originally bright dirty yellow. It was dyed to green. All samples made with Test 1 form.
Test 4. Foil and wire were placed into cast.
The experiments with wire were not effective.
Sensor switch only with touching back side of the cast. Foil gave nice effect of reflection.
42
43
Experimenting with molding and casting
