Mesa Tactical is a manufacturer of tactical shotgun
accessories for the professional operator. After starting out with telescoping shotgun stock systems in 2004, our SureShell® aluminum shotshell carriers have become standard equipment among many US law enforcement agencies, with over 73,000 shipped. Our line of Urbino® Tactical stocks for Benelli and Remington shotguns continues to gain enthusiastic adherents, as well as a new platform, the popular Mossberg 930 semi-automatic shotgun. Our products are made in the USA of high quality materials. Mesa Tactical warrants that all products are free from defective material and workmanship and agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor.
WHAT’S NEW
Mesa Tactical continues to innovate and design excellent tactical products. This includes our first accessory for a rifle, the Faro Stock Adapter for the FN-SCAR, a new Urbino Stock for the Mossberg 930, The Lucy Adapter to fit 12ga. stocks to 20ga frames and the new Mohawk modular forend for the Remington R12/Versamax.
How To Order
For the best service, purchases should be made through an authorized Mesa Tactical dealer in your local area or on the Internet. Please give us a call at 714-545-3332 or visit our website to see if there is a dealer near you. Our new Mesa Tactical webstore is also open for business, and is one of the few places where our entire product line is available. Visit us at www.mesatactical.com. We can also accommodate credit card sales and international orders by phone or by fax at 714-545-3339. Export status is indicated in the SKU charts. “NLR” specifies that no export license is required for most international destinations; items marked “License” cannot be exported without a US State Department export license. We offer a liberal test and evaluation (T&E) program for law enforcement and military customers. Simply mail or fax us a T&E product request on department letterhead and we will send you the items you request for a limited time test. In the catalog listings, “Rem” is an abbreviation for Remington; “Moss” is short for Mossberg; and “Ben” indicates Benelli. The weights in the charts are the packaged shipping weights. Mesa Tactical 1135 Baker St, Costa Mesa, CA 92626 Tel: 714-545-3332 • Fax: 714-545-3339 www.mesatactical.com 2
Copyright © 2004-2014 Mesa Tactical. All rights reserved.
CONTENTS… Urbino Tactical Stock System....................................................................................4 Urbino Tactical Stock Accessories.......................................................................................5 Pocket Sling Attachments......................................................................................................6 Pocket Sling Attachments......................................................................................................7 Mohawk™ Forend......................................................................................................................8 Telescoping Stock and Adapter Kits.........................................................................9 Leo® Telescoping Stock Kit.....................................................................................................9 High-Tube Telescoping Stock Kit........................................................................................10 Telescoping Stock Kits and Adapters................................................................................11 Hydraulic Recoil Buffer..........................................................................................................10 Pocket Sling Attachments....................................................................................................12 Butt Pads and Recoil Buffers...............................................................................................13 Lucy™ 20 Gauge to 12 Gauge Stock Adapter...................................................................14 Faro™ Telescoping Stock Adapters for FN Scar...............................................................15 SIDE MOUNT SureShell™ ALUMINUM Shotshell Carriers........................................16 Remington.....................................................................................................................17 Mossberg........................................................................................................................17 Benelli..............................................................................................................................17 FN SLP.............................................................................................................................18 SureShell™ ALUMINUM Shotshell Carriers WITH RAILS................................... 19 Remington.....................................................................................................................20 Mossberg........................................................................................................................20 Benelli..............................................................................................................................21 Kel-Tec KSG....................................................................................................................21 Stock Mount SureShell Carriers..........................................................................................23 Benelli Stock Mount.....................................................................................................23 SureShell Aluminum Shotshell Carriers for Urbino Tac Stock...........................23 M4 SOPMOD Buttstock Mount SureShell Carrier..................................................23 Barrel and Magazine Clamps...................................................................................24 Picatinny Rails.............................................................................................................25 Receiver Mount Picatinny Rails...........................................................................................25 Remington Saddle Rails..............................................................................................26 Remington Side Mount Rail.......................................................................................26 Rails for Drilled and Tapped Receivers....................................................................27 Adapter Mount Picatinny Rail....................................................................................28 Hook Loops....................................................................................................................30 Magazine Extension Hook Loops........................................................................................30 Rear Hook Loops for Benelli Tactical Stocks....................................................................30 Mesa Tactical T-Shirts............................................................................................. 31
www.MESATACTICAL.com
3
Urbino Tactical Stock System
• Developed specially for law enforcement and military operators • Reduced length-of-pull for quick handling and use with body armor or other load bearing gear
adjustable cheek riser for proper eye • Optional alignment with sights or optics rubber pistol grip for control, • Santoprene comfort and fatigue reduction Limbsaver® butt pad to reduce • Optional felt recoil • Multiple sling attachment options
#91460 Urbino Tactical Stock for Benelli M4 (Limbsaver, 12-GA, Black)
The Urbino the first truly tactical stock for the Benelli shotguns. A shorter LoP is necessary for use in tactical applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder, will not slip and increases comfort and control. The Santoprene grip reduces recoil impact against the web of the operator’s hand, and the optional Limbsaver buttpad substantially reduces felt recoil. The field-adjustable cheek riser provides superior cheek weld when using optics and can be quickly removed or readjusted for use with sights if optics fail.
#90170 SureShell Carrier for Urbino Cheek Riser (6-Shell, 12-GA) (Left Side)
4
Specially-developed SureShell® shotshell carriers can be fitted to the cheek riser (see page 23). Rail-equipped Urbino stocks can be used without the cheek riser. Risers cannot be fitted to stocks that do not have the rails. All Urbino Tactical stocks are made in the USA, and include Benelli-style rear sling loops for 1¼ inch sling webbing. In addition, an QD style sling swivel is included that fits in a hole in the lower rear of the stock.
MESA TACTICAL CATALOG #20
Urbino Tactical Stock System Part #
Item
Platform
Mohawk Forend
Super- LimbCell saver
Cheek Riser
Caliber 12 GA
33 oz
NLR
Yes
12 GA
38 oz
NLR
130.00
12 GA
34 oz
NLR
125.00
Weight Export
MSRP
REMINGTO N 90070
Urbino Pistol Grip Stock
Rem 870/1100/1187
90080
Urbino Pistol Grip Stock
Rem 870/1100/1187
91540
Urbino Pistol Grip Stock
Rem 870/1100/1187
Yes Yes
91550
Urbino Pistol Grip Stock
Rem 870/1100/1187
93490
Urbino Pistol Grip Stock
Rem Versa Max
93500
Urbino Pistol Grip Stock
Rem Versa Max
93510
Urbino Pistol Grip Stock
Rem Versa Max
Yes
12 GA
38 oz
NLR
155.00
12 GA
33 oz
NLR
110.00
12 GA
38 oz
NLR
140.00
12 GA
30 oz
NLR
135.00
Yes
12 GA
35 oz
NLR
165.00
Yes
12 GA
38 oz
NLR
155.00
12 GA
33 oz
NLR
110.00
Yes
12 GA
38 oz
NLR
140.00
12 GA
30 oz
NLR
135.00
Yes
12 GA
35 oz
NLR
165.00 130.00
Yes Yes
93520
Urbino Pistol Grip Stock
Rem Versa Max
93110
Urbino Pistol Grip Stock
Rem Versa Max
Yes
Yes
93120
Urbino Pistol Grip Stock
Rem Versa Max
Yes
$100.00
125.00
93150
Urbino Pistol Grip Stock
Rem Versa Max
Yes
Yes
93160
Urbino Pistol Grip Stock
Rem Versa Max
Yes
Yes
93130
Urbino Pistol Grip Stock
Rem Versa Max
Yes
Yes
93140
Urbino Pistol Grip Stock
Rem Versa Max
Yes
Yes
94680
Urbino Pistol Grip Stock
Moss 930
94700
Urbino Pistol Grip Stock
Moss 930
94690
Urbino Pistol Grip Stock
Moss 930
MO SSBERG
94710
Urbino Pistol Grip Stock
Moss 930
94470
Urbino Pistol Grip Stock
Moss 930
94480
Urbino Pistol Grip Stock
Moss 930
Yes Yes Yes Yes
12 GA
35 oz
NLR
12 GA
40 oz
NLR
155.00
12 GA
35 oz
NLR
160.00
Yes
12 GA
41 oz
NLR
185.00
Coyote
12 GA
35 oz
NLR
140.00
Coyote
12 GA
41 oz
NLR
170.00
12 GA
30 oz
NLR
115.00
Yes
12 GA
35 oz
NLR
145.00
BENEL L I 90030
Urbino Pistol Grip Stock
Benelli M4
90040
Urbino Pistol Grip Stock
Benelli M4
90050
Urbino Pistol Grip Stock
Benelli M2 (M1/M3)**
90060
Urbino Pistol Grip Stock
Benelli M2 (M1/M3)**
91460
Urbino Pistol Grip Stock
Benelli M4
Yes
91470
Urbino Pistol Grip Stock
Benelli M4
Yes
91500
Urbino Pistol Grip Stock
Benelli M2 (M1/M3)**
Yes
91510
Urbino Pistol Grip Stock
Benelli M2 (M1/M3)**
Yes
92410
Urbino Pistol Grip Stock
Ben SuperNova
92420
Urbino Pistol Grip Stock
Ben SuperNova
92430
Urbino Pistol Grip Stock
Ben SuperNova
Yes
92440
Urbino Pistol Grip Stock
Ben SuperNova
Yes
12 GA
29 oz
NLR
115.00
Yes
12 GA
34 oz
NLR
145.00
12 GA
30 oz
NLR
140.00
Yes
12 GA
36 oz
NLR
170.00
12 GA
30 oz
NLR
140.00
Yes
12 GA
35 oz
NLR
170.00
12 GA
30 oz
NLR
115.00
Yes
12 GA
35 oz
NLR
145.00
12 GA
30 oz
NLR
140.00
Yes
12 GA
36 oz
NLR
170.00
** Urbino Tactical stocks for the Benelli M2 can typically be fitted to Benelli M1 and Benelli M3 shotguns as well.
MADE IN USA www.MESATACTICAL.com
5
URBINO TACTICAL POCKET SLING ATTACHMENTS
#91780 Pocket Ambi Hook Loop for Urbino Tactical Stock for Benelli M4 (12-GA)
The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts. The Push Button Sling Swivel mount includes a Push Button Sling Swivel, and all sling mounts feature a tough mil-spec manganese phosphate finish. Ambi style sling attachments feature mounts on both sides of the receiver.
URBINO TACTICAL POCKET SLING ATTACHMENTS / 12 GAUGE Part #
Item
Platform
Ambidextrous
Sling Style
Weight
Export
MSRP
REMINGTO N 91520
Pocket Push Button Sling Mount
Rem 870/1100/11-87
-
Push Button
2 oz
NLR
91530
Pocket Push Button Sling Mount
Rem 870/1100/11-87
Yes
Push Button
2 oz
NLR
$25.00 25.00
91560
Pocket Sling Loop
Rem 870/1100/11-87
-
1 1/4 in Sling
1 oz
NLR
12.00 12.00
91570
Pocket Hook Loop
Rem 870/1100/11-87
-
H&K Hook
1 oz
NLR
91600
Pocket Sling Loop
Rem 870/1100/11-87
Yes
1 1/4 in Sling
1 oz
NLR
14.00
91610
Pocket Hook Loop
Rem 870/1100/11-87
Yes
H&K Hook
1 oz
NLR
14.00
93980
Pocket Sling Loop
Rem Versa Max
-
1 1/4 in Sling
1 oz
NLR
17.00
93990
Pocket Hook Loop
Rem Versa Max
-
H&K Hook
1 oz
NLR
17.00
94000
Pocket Push Button Sling Mount
Rem Versa Max
-
Push Button
1 oz
NLR
30.00
94010
Pocket Sling Loop
Rem Versa Max
Yes
1 1/4 in Sling
2 oz
NLR
19.00
94020
Pocket Hook Loop
Rem Versa Max
Yes
H&K Hook
1 oz
NLR
19.00
94030
Pocket Push Button Sling Mount
Rem Versa Max
Yes
Push Button
2 oz
NLR
30.00
BENEL L I 91440
Pocket Push Button Sling Mount
Benelli M2
-
Push Button
2 oz
NLR
30.00
91450
Pocket Push Button Sling Mount
Benelli M2
Yes
Push Button
2 oz
NLR
30.00
91480
Pocket Push Button Sling Mount
Benelli M4
-
Push Button
2 oz
NLR
30.00
91490
Pocket Push Button Sling Mount
Benelli M4
Yes
Push Button
2 oz
NLR
30.00
91870
Pocket Sling Loop
Benelli M2
-
1 1/4 in Sling
1 oz
NLR
17.00
91890
Pocket Sling Loop
Benelli M2
Yes
1 1/4 in Sling
1 oz
NLR
19.00
92490
Pocket Push Button Sling Mount
Ben Super Nova
-
Push Button
1 oz
NLR
35.00
92500
Pocket Push Button Sling Mount
Ben Super Nova
Yes
Push Button
2 oz
NLR
35.00
91750
Pocket Sling Loop
Benelli M4
-
1 1/4 in Sling
1 oz
NLR
17.00
91760
Pocket Hook Loop
Benelli M4
-
H&K Hook
1 oz
NLR
17.00
91770
Pocket Sling Loop
Benelli M4
Yes
1 1/4 in Sling
1 oz
NLR
19.00
91780
Pocket Hook Loop
Benelli M4
Yes
H&K Hook
1 oz
NLR
19.00
91880
Pocket Hook Loop
Benelli M2
-
H&K Hook
1 oz
NLR
17.00
91900
Pocket Hook Loop
Benelli M2
Yes
H&K Hook
1 oz
NLR
19.00
92450
Pocket Sling Loop
Ben Super Nova
-
1 1/4 in Sling
1 oz
NLR
22.00
92460
Pocket Hook Loop
Ben Super Nova
-
H&K Hook
1 oz
NLR
22.00
92470
Pocket Sling Loop
Ben Super Nova
Yes
1 1/4 in Sling
2 oz
NLR
24.00
92480
Pocket Hook Loop
Ben Super Nova
Yes
H&K Hook
1 oz
NLR
24.00
94410
Pocket Sling Loop
Moss 930
-
1 1/4 in Sling
1 oz
NLR
17.00
94420
Pocket Hook Loop
Moss 930
-
H&K Hook
1 oz
NLR
17.00
94440
Pocket Sling Loop
Moss 930
Yes
1 1/4 in Sling
1 oz
NLR
19.00
94450
Pocket Hook Loop
Moss 930
Yes
H&K Hook
1 oz
NLR
19.00
94430
Pocket Push Button Sling Mount
Moss 930
-
Push Button
1 oz
NLR
30.00
94460
Pocket Push Button Sling Mount
Moss 930
Yes
Push Button
2 oz
NLR
30.00
MO SSBERG
REAR HOOK LOOP FOR URBINO TACTICAL STOCKS The Urbino Tactical stocks include stamped steel sling plates that mimic the factory Benelli rear sling plates. We have produced replacement stampings that feature a circular hook loop instead of the sling loop for use with increasingly popular H&K style (dog leash) sling hooks. These hook loops are stamped steel with a tough mil-spec manganese phosphate finish.
REAR HOOK LOOP FOR URBINO TACTICAL STOCKS / 12 GAUGE Part #
Item
Platform
Sling Style
Weight
Export
MSRP
REMINGTO N 91790
Rear Hook Loop
Rem 870
H&K Hook
1 oz
NLR
91800
Rear Hook Loop
Rem 1100/11-87
H&K Hook
1 oz
NLR
$17.00 17.00
93950
Rear Hook Loop
Rem Versa Max
H&K Hook
1 oz
NLR
17.00
91810
Rear Hook Loop
Benelli M2
H&K Hook
1 oz
NLR
17.00
91820
Rear Hook Loop
Benelli M4
H&K Hook
1 oz
NLR
17.00
93940
Rear Hook Loop
Ben SuperNova
H&K Hook
1 oz
NLR
17.00
H&K Hook
1 oz
NLR
17.00
BENEL L I
MO SSBERG 93890
Rear Hook Loop
Moss 930
Urbino Tactical Stock ACCESSORIES Individual components of the Urbino Tactical stock system can be purchased separately. The following items will fit on any supported shotgun platform. Note that cheek risers can only be fitted to Urbino Tactical stocks that include molded side support rails.
#92510 Standard Buttpad for Urbino Stock (Black)
Urbino Tactical Stock ACCESSORIES Part # 90360
Item Limbsaver Buttpad for Urbino Stock (ODG)
Stock Style Urbino
Riser No Riser
Weight 6 oz
Export NLR
90520 90530
MSRP $25.00
Standard Buttpad for Urbino Stock
Urbino
No Riser
6 oz
NLR
25.00
Limbsaver Buttpad for Urbino Stock
Urbino
No Riser
6 oz
NLR
50.00
91690
Cheek Riser for Urbino Stock
Urbino
No Riser
10 oz
NLR
30.00
92510
Standard Buttpad for Urbino Stock
Urbino
Cheek Riser
6 oz
NLR
25.00
92520
Limbsaver Buttpad for Urbino Stock
Urbino
Cheek Riser
6 oz
NLR
50.00
94530
Cheek Riser for Urbino Stock (Coyote)
Urbino
Required
10 oz
NLR
9.00
94540
Cheek Riser for Urbino Stock (ODG)
Urbino
Required
10 oz
NLR
9.00
* Cheek Risers can only be fitted to Urbino Tactical stocks with molded riser support rails.
MADE IN USA www.MESATACTICAL.com
7
Mohawk MOHAWK™ forend FOREND for semi-automatic shotguns Mesa Tactical developed the Mohawk forend for the R12/Versa Max® in conjunction with Remington Defense. Designed and built as a tactical forend, Mohawk adds functionality and improves performance. Mohawk is a modular forend system capable of meeting multiple tactical requirements. Integral accessory pockets on the right and left side accept inserts as required by the shooter. The inserts, included with the Mohawk forend include; polymer Picatinny rail sections, flat pads for mounting other Picatinny rail sections or other direct mount accessories, pocket covers with an integral wire opening and contoured pocket covers. Modularity and accessory attachment points are only part of what makes Mohawk the best tactical forend for the R12. It has an ergonomic shape and finger grooves maximizing weapon handling and control. Vertical grooves provide a positive and secure grip. Mohawk comes standard with a ventral Picatinny mount at the front of the forend. An installed sling swivel is included. Also available are an optional forward steel sling plate or hook loop, either standard or ambidextrous.
#90360 Mohawk™ Forend for Rem Versa Max (12-GA, Black)
#90360 Mohawk™ Forend for Rem Versa Max (12-GA, Black)
MOHAWK ™ FOREND FOR SEMI-AUTOMATIC SHOTGUNS Part # 90360
8
Item Mohawk™ Forend for Rem Versa Max (12-GA, Black)
Platform Rem Versa Max
Caliber 12-GA
Weight 10 oz
MESA TACTICAL CATALOG #20
Export NLR
MSRP $65.00
TELESCOPING STOCK AND ADAPTER KITS LEO® TelescopiNg sTock kiT #93220 LEO Telescoping Hydraulic Recoil Stock Kit for Moss 500 (12-GA)
•
• Adjustable length-of-pull to fit shooter’s stature or for use with body armor and other equipment • Optional hydraulic recoil buffer reduces felt recoil by 70% • Gives the shotguns similar handling characteristics to the AR-15 • Collapsible stock makes the shotgun easier to store, transport and deploy from inside vehicles • Pistol grip configuration allows increased control and comfort • Sling attachment points included
Adapts AR-15 style butt stocks and pistol grips for use with Remington 870 and Mossberg 500/590 shotguns
The stock adapters are investment cast aircraft grade aluminum, CNC machined and powdercoated black with a tough, chemical resistant finish. The LEO adapter is our best selling model, and features an optimal stock elevation allowing the use of iron sights or even the bead sight. All LEO adapters accept optional pushbutton sling swivels, and Remington 870 LEO adapters can accept stamped steel pocket sling loop and hook loops.
www.MESATACTICAL.com
#91260 LEO Telescoping Stock Kit for Rem 870
9
HIGH-TUBE TELESCOPING STOCK KIT
• Same comb height as an AR-15 • Allows use of AR configured optics and mounts • Requires optics or AR style sights • High-Adapters and kits come with 9 or 24 inch
Picatinny top rails
#92040 High-tube Telescoping Stock Kit for Moss 500 (QD Swivel Clamp, 24 in rail)
Our High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (included). These specialized adapters are for certain law enforcement applications or competition. High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others. High-tube adapters and stock kits include nine inch or 24 inch top Picatinny optics rails. While the 9.50 inch rails can optionally be secured to the shotgun receiver as well as the stock adapter, the 24 inch rails are anchored at the front by a clamp. The Remington versions are available with a barrel clamp or a magazine clamp, or no clamp at all (for customers who already have clamps); the Mossberg rails use a magazine clamp that features either a short length of Picatinny accessory rail at the bottom, or a sling swivel stud. No gunsmithing is #92290 required to install. Minor fitting of High-Tube Telescoping Hydraulic fasteners may be necessary. Recoil Stock Kit for Rem 870
HYDRAULIC RECOIL BUFFER
#92190 Crosshair Hydraulic Recoil Buffer
10
The Crosshair Hydraulic Recoil Buffer takes the place of the receiver extension tube, converting the AR-15 telescoping stock into a recoil-buffered stock assembly without further modification. Recoil-buffered versions are available for all three of the telescoping stock systems, or the recoil buffer can be purchased separately (see page 12). The recoil buffer accepts mil-spec dimensioned buttstocks. The Crosshair Hydraulic Recoil Buffer is CNC machined from 6061-T6 aluminum and meets the stringent standards of military and law enforcement users. Our basic kits include the adapter and all necessary installation hardware. No gunsmithing is required for installation.
MADE IN USA
MESA TACTICAL CATALOG #20
TelescOPING STOCK ADAPTER VS. STOCK KITS Our aluminum adapter kits include everything necessary to retrofit Remington or Mossberg pump shotguns with most AR-15 style stocks and pistol grips. Our adapter kits allow customers to add their own AR-15 stock assemblies as desired.
#91250 LEO Telescoping Stock Adapter for Rem 870 (12 GA)
Our complete stock kits are more comprehensive. They include the aluminum AR adapter; Hogue rubber overmolded grip; US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly; and all necessary assembly hardware and instructions. The High-tube stock kits also include a top Picatinny rail. A Telescoping Shotgun Stock Multi-tool and pushbutton sling swivel are included with every stock kit.
#92230 LEO Telescoping Hydraulic Recoil Stock Kit for Rem 870 (12-GA)
TELESCOPING STOCK KITS AND ADAPTERS / 12 GAUGE Part#
Item
Platform
91250
LEO Telescoping Stock Adapter LEO Telescoping Stock Kit LEO Telescoping Hydraulic Recoil Stock LEO Telescoping Stock Adapter
Rem 870
91260 92230 93170 93180
LEO Telescoping Stock Kit
93220
LEO Telescoping Hydraulic Recoil Stock
90490
High-tube Telescoping Stock Kit High-tube Telescoping Stock Kit High-tube Telescoping Stock Adapter and Rail High-tube Telescoping Stock Adapter and Rail High-tube Telescoping Stock Adapter and Rail High-tube Telescoping Stock Adapter and Rail High-tube Telescoping Stock Adapter and Rail High-tube Telescoping Stock Kit High-tube Telescoping Stock Kit High-tube Telescoping Stock Kit High-tube Telescoping Stock Kit
90500 90620 90630 90950 91000 91010 91020 91030 92030 92040
Rem 870 Rem 870 Moss 500/590/ Mav 88 Moss 500/590/ Mav 88 Moss 500/590/ Mav 88 Moss 500/590 Rem 870 Moss 500/590 Rem 870 Rem 870 Rem 870 Rem 870 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590
Rail Style Type Rail Length Clamp L EO TEL ESC O PING STO C K LEO Adapter Only LEO Stock Kit LEO Stock Kit LEO Adapter Only
Recoil
Weight
Export
MSRP
-
11 oz
NLR
$70.00
-
31 oz
NLR
190.00
Hydraulic
40 oz
NLR
325.00
-
10 oz
NLR
75.00
LEO
Stock Kit
-
-
-
-
31 oz
NLR
195.00
LEO
Stock Kit
-
-
-
Hydraulic
40 oz
NLR
330.00
STO C K -
-
38 oz
NLR
295.00
-
-
41 oz
NLR
290.00
-
-
22 oz
NLR
175.00
None
-
25 oz
NLR
170.00
None
-
38 oz
NLR
275.00
Barrel
-
38 oz
NLR
330.00
Magazine Pic Rail
-
38 oz
NLR
330.00
-
38 oz
NLR
345.00
Swivel
-
38 oz
NLR
345.00
Pic Rail
-
45 oz
NLR
465.00
Swivel
-
45 oz
NLR
465.00
HIGH-TUBE TEL ESC O PING High- Stock Adapter 9 1/2 In tube Kit High- Stock Yes 9 In tube Kit High- Adapter Adapter 9 1/2 In tube Only High- Adapter Yes 9 In tube Only High- Adapter Yes 24 In tube Only High- Adapter Yes 24 In tube Only High- Adapter Yes 24 In tube Only High- Adapter Yes 24 In tube Only High- Adapter Yes 24 In tube Only High- Stock Yes 24 In tube Kit High- Stock Yes 24 In tube Kit
www.MESATACTICAL.com
11
TELESCOPING STOCK KITS AND ADAPTERS / 12 GAUGE Part# 92050 92060 92070 92080 92090 92100 92280 92290 94510 94520
92180 92190 93070
Item High-tube Telescoping Stock Kit High-tube Telescoping Stock Kit High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Hydraulic Recoil Stock High-tube Telescoping Stock Kit High-tube Telescoping Hydraulic Recoil Stock
Platform Rem 870
M4 SOPMOD Telescoping Hydraulic Recoil Stock (Mil-spec) Crosshair Hydraulic Recoil Buffer Receiver Extension Tube (mil-spec)
All
Accessory
All
Accessory
-
-
-
-
All
Accessory
-
-
-
-
Rem 870 Moss 500/590 Moss 500/590 Rem 870 Rem 870 Moss 500/590 Rem 870 Rem 870 Rem 870
Style Hightube Hightube Hightube Hightube Hightube Hightube Hightube Hightube Hightube Hightube
Rail Length 24 In
Type Rail Clamp Recoil Stock Yes Barrel Kit Stock Yes 24 In Magazine Kit Stock Yes 24 In Pic Rail Hydraulic Kit Stock Yes 24 In Swivel Hydraulic Kit Stock Yes 24 In Barrel Hydraulic Kit Stock Yes 24 In Magazine Hydraulic Kit Stock Adapter 9 1/2 In Hydraulic Kit Stock Yes 9 In Hydraulic Kit Stock Yes 24 In None Kit Stock Yes 24 In None Hydraulic Kit AC C ESSO RIES Hydraulic
continued
Weight 45 oz
Export NLR
MSRP 450.00
45 oz
NLR
450.00
62 oz
NLR
590.00
62 oz
NLR
590.00
62 oz
NLR
585.00
62 oz
NLR
585.00
48 oz
NLR
430.00
50 oz
NLR
425.00
62 oz
NLR
530.00
62 oz
NLR
530.00
28 oz
License
180.00
Hydraulic
17 oz
License
150.00
-
4 oz
License
40.00
* 24 inch Remington rails with no clamps require magazine or barrel clamp to support front rail.
POCKET SLING ATTACHMENTS All our telescoping stock adapter designs for the Remington 870, include a pocket between the adapter and the shotgun receiver that accepts steel sling sloops or hook loops (see page 7). These sling mounts are stamped steel with a tough mil-spec manganese phosphate finish.
#91380 Pocket Hook Loop for RemingtonStock Adapter
#91390 Pocket Ambi Sling Loop for Remington Stock Adapter
POCKET SLING ATTACHMENTS Part #
Platform
Caliber
Ambidextrous
Sling Style
Weight
Export
91380
Pocket Hook Loop for Stock Adapter
Rem 870
12-GA
-
H&K Loop
1 oz
NLR
$10.00
91400
Pocket Hook Loop for Stock Adapter
Rem 870
12-GA
Yes
H&K Loop
1 oz
NLR
12.00
91370
Pocket Sling Loop for Stock Adapter
Rem 870
12-GA
-
1 1/4 in Sling
1 oz
NLR
10.00
91390
Pocket Sling Loop for Stock Adapter
Rem 870
12-GA
Yes
1 1/4 in Sling
1 oz
NLR
12.00
12
Item
MESA TACTICAL CATALOG #20
MSRP
BUTT PADS AND RECOIL BUFFERS For shooting comfort and control, we recommend a butt pad for the stocks, and we offer two styles. USGI-style slip-on rubber butt pads expand the butt’s surface area and make it easier and more comfortable to shoulder and fire your weapon, though they do not offer any recoil absorption.
#91850 Limbsaver® Snap-on Recoil Pad (12 GA)
LimbSaver slip-on recoil pads feature a patented threestep recoil reduction technology that reduces up to 70% of felt recoil, and maintains target acquisition. They feature a 12 month warranty by Limbsaver. Any Mesa Tactical telescoping stock kit can be upgraded with a Crosshair hydraulic recoil buffer which replaces the receiver extension tube in our stock kits and reduces felt recoil by up to 70%. Purchase either a complete replacement M4 SOPMOD recoil buttstock assembly, or the “drop in” hydraulic buffer alone (stock nut sold separately).
#92180 M4 SOPMOD Telescoping Hydraulic Recoil Stock (Mil-spec)
Additional Limbsaver and standard rubber buttpads for the Urbino Tactical stocks can also be ordered separately.
BUTT PADS, RECOIL BUFFERS AND ACCESSORIES Part # 90560
Item Telescoping Shotgun Stock Multi-tool
90860
Trigger Pin Replacement Kit for Remington
91190
Push Button Sling Swivel for 1 1/4 in Webbing
91200
Hogue Rubber Overmold Combat Grip
Platform -
Stock Style -
Weight 3 oz
Export NLR
MSRP $ 8.50
Rem 870/1100/11-87
-
-
-
1 oz
NLR
12.00
1 oz
License
Moss 500, Rem 870
12.00
AR Adapter
3 oz
License
26.00
91850
Limbsaver® Snap-on Recoil Pad
-
M4 SPMOD Stock
4 oz
License
40.00
92180
M4 SOPMOD Telescoping Hydraulic Recoil Stock (Mil-spec)
All
Accessory
28 oz
NLR
180.00
92190
Crosshair Hydraulic Recoil Buffer
All
Accessory
17 oz
License
150.00
92810
CAR Stock Lock Nut
-
M4 SPMOD Stock
1 oz
License
6.00
93070
Receiver Extension Tube (Mil-spec)
All
Accessory
4 oz
License
40.00
MADE IN USA www.MESATACTICAL.com
13
LUCY™ 20 GA TO 12 GA STOCK ADAPTER Mesa Tactical’s 20 gauge to 12 gauge adapter dramatically increases the number and type of butt stocks that can be used with 20 gauge Remington 870 shotguns. Attached at the receiver in place of the standard 20 gauge stock, this cast steel adapter enables the use of any 12 gauge Remington 870 stock. There are many more options for the 12 gauge than 20 gauge, including Mesa Tactical’s Urbino Stocks, telescoping stock adapter kits and even the Hydraulic Buffer system.
#93890 LUCY™ 20 GA to 12 GA Stock Adapter for Rem 870
AI&P Tactical has long been an advocate of the 20 gauge shotgun as a tactical platform. Needing professional use tactical products for their 20 gauge shotgun builds, AI&P contacted Mesa Tactical about making an adapter to fit 12 gauge stocks onto the smaller 20 gauge frames. The resulting adapter helps AI&P meet the needs and requests looking to fit Mesa Tactical stocks onto their 20 gauge Remington 870 shotguns.
20 ga Rem 870 with 12GA Urbino Tactical Stock
20 GAUGE TO 12 GAUGE STOCK ADAPTER Part # 93890
Item LUCY 20 GA to 12 GA Stock Adapter for Rem 870
Platform
Caliber
Rem 870
20-GA
20 ga Rem 870 with a 12 GA factory stock
14
MESA TACTICAL CATALOG #20
Weight Export 2 oz
NLR
MSRP $20.00
FARO™ TELESCOPING STOCK ADAPTER FOR FN SCAR • Adapts the FN SCAR to accept any AR-15 butt stock • Gives FN SCAR owners butt stock options and choices • Mirrors AR-15 stock to top rail height • Integral ambidextrous QD sling attachment points • Machined from investment cast aluminum • Available in black and FDE
#92550 Faro Telescoping Stock Adapter for FN SCAR (Black)
Mesa Tactical’s Faro Adapter allow FN-SCAR shooter the option of using any AR-15 butt stock in place of the factory stock. This give FN-SCAR shooters an incredible range of products available to best suit their needs or preferences. Machined from investment cast aluminum, the Faro Adapter is easy to install and requires no gunsmithing. Simply remove the factory stock, slide the adapter in its place, and then install any AR-15 buffer tube and stock. The Faro adapter includes ambidextrous QD sling attachment points.
#92570 Faro Telescoping Stock Adapter and Receiver Extension for FN SCAR (Black)
FARO STOCK ADAPTERS FOR FN SCAR Part #
Weight
Export
92550
Faro Telescoping Stock Adapter for FN SCAR (Black)
Item
1 oz
NLR
$10.00
92560
Faro Telescoping Stock Adapter for FN SCAR (FDE)
1 oz
NLR
12.00
92570
Faro Telescoping Stock Adapter and Receiver Extension for FN SCAR (Black)
1 oz
NLR
10.00
92580
Faro Telescoping Stock Adapter and Receiver Extension for FN SCAR (FDE)
1 oz
NLR
12.00
www.MESATACTICAL.com
MSRP
15
SIDE MOUNT SURESHELL ALUMINUM SHOTSHELL CARRIERS ®
best and most durable weapon mounted • The shotshell carrier available rubber friction retention system • Innovative solidly holds shotshells in place • Machined from 6061-T6 aluminum • Hard coat anodized matte black Mounts via brackets attached to shotgun or • via drilled and tapped receiver holes
#90320 SureShell Carrier for Remington 870 (4-shell, 12-GA / left side)
#93250 SureShell Carrier for Remington 870 (6-shell, 20-GA / left side)
16
SureShell aluminum shotshell carriers are the best weapon mounted shotgun ammo carriers available. Machined from aircraft aluminum, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse. Since their introduction in the spring of 2005, they have rapidly become our best-selling products, and have emerged as the standard on-gun shotshell storage of tactical operators and professionals. SureShell carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard coat anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. Most of our SureShell aluminum shotshell carriers mount directly to the receiver of leading shotgun platforms.
MESA TACTICAL CATALOG #20
REMINGTON The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Note, SureShell aluminum shotshell carriers cannot be installed on right side of Remington semi-auto shotguns.
#90390 SureShell Carrier for Moss 500/590 (6-shell, 20-GA)
To use a six- and eight-shot SureShell carrier mounted on the left side of the Remington 870 shotgun, you must use a tactical forend that does not overlap the receiver, or a factory forend that is cut down appropriately. SureFireŽ forends are fully compatible with our six-shot SureShell carriers, but will need about ½ inch shaved off the end to be installed with Mesa Tactical eight-shot SureShell carriers. Remington side mount SureShell carriers are available in both 12 gauge and 20 gauge models.
MOSSBERG The side mount system of our shotgun
#93040 SureShell Carrier for Moss 930 (8-shell, 12-GA)
SureShell aluminum shotshell carriers for the Mossberg 500/590 substitutes two custom-machined steel Chicago screws for the trigger pin. At the front of the mounting plate, custom retaining steel hardware is used with an elongated extractor screw and a machined key hole in the plate. The Mossberg 930 mounting system is similar, except it uses two sets of Chicago screws in place of the two trigger pins. The mounting plate was designed not to obscure the receiver serial number to make it easier for armorers to inventory their weapons. SureShell aluminum shotshell carriers for the Mossberg fit on the left side of the receiver only. You must use a tactical forend that does not significantly overlap the receiver, or a factory forend that is cut down appropriately. SureFire forends will work fine with no alterations.
#90830 SureShell Carrier for Benelli M1/M2 (4-shell, 12-GA)
BENELLI Our side mount shotgun SureShell aluminum shotshell carriers for the Benelli M1/M2 substitute custom-made steel Chicago screws for the trigger pin. The mounting plate is curved to hug the shotgun receiver, preventing movement of the SureShell assembly. SureShell aluminum shotshell carriers for the Benelli M1/M2 fit on the left side of the receiver only; they are known to fit onto Benelli M3 shotguns as well as M1 and M2 models. Extra weight on the weapon may adversely affect the reliable cycling of inertia-operated shotguns such as the Benelli M1 or M2 when used with low-recoil ammunition.
www.MESATACTICAL.com
#90850 SureShell Carrier for Ben M1/M2/M3 (8-shell, 12-GA)
17
FN SLP The mounting system for the SureShell carrier for the FN Self-loading Police shotgun is similar to that of the Mossberg 930, with two sets of Chicago screws in place of the two trigger pins. SureShell aluminum shotshell carriers for the FN SLP fit on the left side of the receiver only, and will not interfere with the forend.
#90110 SureShell Carrier for FN SLP (4-shell, 12-GA)
SIDE MOUNT SURESHELL SHOTSHELL CARRIERS Part #
Item
Platform
Caliber
Shells
Side
Weight Export
MSRP
REMINGTO N 90320
SureShell Carrier
Rem 870/1100/11-87
12-GA
4 shell
Left
7 oz
NLR
$65.00
90600
SureShell Carrier
Rem 870
12-GA
4 shell
Right
7 oz
NLR
65.00
90210
SureShell Carrier
Rem 870/1100/11-87
12-GA
6 shell
Left
8 oz
NLR
70.00
90420
SureShell Carrier
Rem 870/1100/11-87
12-GA
8 shell
Left
10 oz
NLR
85.00
93240
SureShell Carrier
Rem 870/1100/11-87
20-GA
4 shell
Left
7 oz
NLR
65.00
93230
SureShell Carrier
Rem 870
20-GA
4 shell
Right
7 oz
NLR
65.00
93250
SureShell Carrier
Rem 870/1100/11-87
20-GA
6 shell
Left
9 oz
NLR
70.00
93260
SureShell Carrier
Rem 870/1100/11-87
20-GA
8 shell
Left
10 oz
NLR
85.00
MO SSBERG 91240
SureShell Carrier
Moss 500/590/Mav 88
12-GA
4 shell
Left
6 oz
NLR
70.00
90390
SureShell Carrier
Moss 500/590/Mav 88
12-GA
6 shell
Left
8 oz
NLR
75.00
90340
SureShell Carrier
Moss 500/590/Mav 88
12-GA
8 shell
Left
10 oz
NLR
90.00
93020
SureShell Carrier
Mossberg 930
12-GA
4 shell
Left
6 oz
NLR
70.00
93030
SureShell Carrier
Mossberg 930
12-GA
6 shell
Left
8 oz
NLR
75.00
93040
SureShell Carrier
Mossberg 930
12-GA
8 shell
Left
10 oz
NLR
90.00
BENEL L I 90830
SureShell Carrier
Benelli M1/M2/M3
12-GA
4 shell
Left
9 oz
NLR
70.00
90840
SureShell Carrier
Benelli M1/M2/M3
12-GA
6 shell
Left
9 oz
NLR
75.00
90850
SureShell Carrier
Benelli M1/M2/M3
12-GA
8 shell
Left
11 oz
NLR
90.00
FNH-USA 90110
SureShell Carrier
FN SLP
12-GA
4 shell
Left
6 oz
NLR
70.00
90120
SureShell Carrier
FN SLP
12-GA
6 shell
Left
8 oz
NLR
75.00
90130
SureShell Carrier
FN SLP
12-GA
8 shell
Left
10 oz
NLR
90.00
18
MESA TACTICAL CATALOG #20
SURESHELL ALUMINUM SHOTSHELL CARRIERS WITH RAIL best and most durable weapon • The mounted shotshell carrier available rubber friction retention system • Innovative solidly holds shotshells in place • Machined from 6061-T6 aluminum • Integrated Picatinny rail for optics or sights • Hard coat anodized matte black Mounts via brackets attached to shotgun or • via drilled and tapped receiver holes
#91950 SureShell Carrier and Rail for Remington with Barrel Clamp (6-shell, 12-GA, 20 inch)
Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver. SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four, six and eight shell configurations and multiple rail lengths available. See chart for model specific details.
www.MESATACTICAL.com
19
Remington Mesa Tactical Saddle Rails for the Reming-
#91630 SureShell Carrier and Rail for Remington 870 (6-shell, 12-GA, 5 inch)
ton 870, 1100 and 11-87 are aluminum brackets that wrap around the top of the shotgun receiver, with a Picatinny optics rail at the top. The factory trigger pins are replaced by an internally threaded steel pin (in the rear) and paired Chicago screws (up front), to which both sides of the saddle rail are securely bolted. SureShell Saddle Rails feature a MIL-STD-1913 (NATO STANAG 4694) Picatinny sight rail along the top, and a four-, six- or eight-shot SureShell aluminum shotshell carrier yoke on the left side of the receiver. The rail is notched at the rear to accommodate Scattergun/Wilson style ghost ring sights, and extends to the front of the shotgun receiver (5 inch rail), 2¾ inches past the front of the receiver (8½ inch rail), or just beyond the barrel’s magazine lug (20 inch rail). The 20 inch rails are anchored at the front by a clamp. They are available with a barrel clamp or a magazine clamp, or no clamp at all (for customers who already have clamps).
Receiver mount SureShell aluminum shotshell carriers for the Remington Versa Max semi-automatic shotgun feature mounting brackets with integral top Picatinny sight rails. These brackets are secured to the weapon using the top mounting screw holes. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. #93600 SureShell Carrier and Rail for Moss 500 with QD Swivel Clamp (6-shell, 12-GA, 20 in)
No gunsmithing is required to install the SureShell Saddle Rail, except for optional forend alterations as described above under side mount carriers. Saddle Rails are also available without the shell carriers (see page 26).
Mossberg These SureShell aluminum shotshell carriers for the Mossberg 500 and 590 feature mounting brackets with integral top Picatinny sight rails. The brackets are secured to the weapon using the top mounting screw holes found on Mossberg 500 and 590 shotguns made since 1997. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. #93630 SureShell Carrier and Rail for Moss 500 (6-shell, 12-GA, 4 1/2 in)
20
The 20 inch rails are anchored at the front by a magazine clamp that features either a short length of Picatinny accessory rail at the bottom, or a sling swivel stud. The front clamp interferes with the barrel lug on 18 inch Mossberg 590s, and so are incompatible with these platforms. Twenty inch Mossberg 590s fit just fine, however.
MESA TACTICAL CATALOG #20
Benelli While the Benelli M2 Tactical semi-automatic and Benelli SuperNova速 pump-action shotgun feature factory-tapped rail mounting holes in the top of the receiver, the Benelli M4 and M1014 are shipped with a top Picatinny sight rail. These provided us with an opportunity to develop SureShell aluminum shotshell carrier mounting solutions for Benelli shotguns that are streamlined and very robust. Receiver mount SureShell aluminum shotshell carriers for the Benelli M2, M4 and M1014 feature mounting brackets with integral top Picatinny sight rails. These brackets are secured to the weapon using the top mounting screw holes. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. SureShell aluminum shotshell carriers for the Benelli M2 Tactical can be installed on Benelli M1 shotguns with round-top receivers by tapping the top of the shotgun receiver with #8-40 threads. Consult a gunsmith. Extra weight on the weapon may adversely affect the reliable cycling of inertia-operated shotguns such as the Benelli M1 or M2 when used with low-recoil ammunition. The Benelli M4 is gas-operated and has no such cycling sensitivity.
#90880 SureShell Carrier and Rail for Benelli M4/M1014 (6-shell, 12-GA, 5 1/2 in)
#91210 SureShell Carrier and Rail for Benelli M2 Tactical (4-shell, 12-GA, 4 1/2 in)
Kel-Tec KSG The SureShell carrier system for the Kel-Tec KSG comprises a replacement anodized aluminum Picatinny optics rail which supports one or two machined shell carrier yokes. Small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (rail not included, see page 29). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun. SureShell carriers for the Kel-Tec KSG feature four- or six-shell yokes, on the left side or right side or both sides. A replacement Picatinny rail without SureShell yokes is also available, (see page 27).
#93000 SureShell Carrier and Rail for Kel-Tec KSG (12-shell, 12-GA, Both Sides)
MADE IN USA www.MESATACTICAL.com
21
SURESHELL SHOTSHELL CARRIERS WITH RAILS / 12 GAUGE Part #
Item
Platform
92160 91630 91640 92700 92710 92720 91970 91980 91990 91940 92120 91950 92130 91960 92140 93650 93660 93670 93680 93690 93700
SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail
Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem 870/1100/11-87 Rem Versa max Rem Versa max Rem Versa max Rem Versa max Rem Versa max Rem Versa max
93620 93630 93640 93560 93590 93570 93600 93580 93610
SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail
Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590 Moss 500/590
91210 91220 91230 90870 90880 90890 92000 92010 92020
SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail
Benelli M2 Benelli M2 Benelli M2 Benelli M4 Benelli M4 Benelli M4 Ben Supernova Ben Supernova Ben Supernova
92950 92960 92970 92980 92990 93000
SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail SureShell Carrier and Rail
Kel-Tec KSG Kel-Tec KSG Kel-Tec KSG Kel-Tec KSG Kel-Tec KSG Kel-Tec KSG
Shells Side REMINGTO N 4 shell Left 6 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left 4 shell Left 4 shell Left 6 shell Left 6 shell Left 8 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left MO SSBERG 4 shell Left 6 shell Left 8 shell Left 4 shell Left 4 shell Left 6 shell Left 6 shell Left 8 shell Left 8 shell Left BENEL L I 4 shell Left 6 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left 4 shell Left 6 shell Left 8 shell Left K EL-TEC 4 shell Left 4 shell Right 8 shell Both 6 shell Left 6 shell Right 12 shell Both
Length
Clamp
Mount
Weight
Export
MSRP
5 In 5 In 5 In 8½ In 8½ In 8½ In 20 In 20 In 20 In 20 In 20 In 20 In 20 In 20 In 20 In 7 in 7 in 7 in 10 in 10 in 10 in
None None None Barrel Magazine Barrel Magazine Barrel Magazine 100 105 120 115 120 135
Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Saddle Top Top Top Top Top Top
11 oz 12 oz 14 oz 13 oz 14 oz 16 oz 23 oz 25 oz 25 oz 27 oz 26 oz 27 oz 26 oz 28 oz 28 oz 11 oz 13 oz 15 oz 14 oz 16 oz 18 oz
NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR NLR
$120.00 125.00 140.00 135.00 140.00 155.00 180.00 185.00 200.00 235.00 235.00 240.00 240.00 255.00 255.00 100.00 105.00 120.00 115.00 120.00 135.00
4½ In 4½ In 4½ In 20 In 20 In 20 In 20 In 20 In 20 In
Pic Rail Swivel Pic Rail Swivel Pic Rail Swivel
Top Top Top Top Top Top Top Top Top
9 oz 9 oz 12 oz 27 oz 27 oz 27 oz 27 oz 30 oz 30 oz
NLR NLR NLR NLR NLR NLR NLR NLR NLR
115.00 120.00 135.00 250.00 250.00 255.00 255.00 270.00 270.00
4½ In 4½ In 4½ In 5½ In 5½ In 5½ In 5½ In 5½ In 5½ In
-
Top Top Top Top Top Top Top Top Top
8 oz 9 oz 11 oz 8 oz 8 oz 11 oz 8 oz 10 oz 11 oz
NLR NLR NLR NLR NLR NLR NLR NLR NLR
115.00 120.00 135.00 115.00 120.00 135.00 105.00 110.00 125.00
13 In 13 In 13 In 13 In 13 In 13 In
-
Top Top Top Top Top Top
27 oz 27 oz 35 oz 29 oz 29 oz 37 oz
NLR NLR NLR NLR NLR NLR
210.00 210.00 250.00 215.00 215.00 255.00
* SureShell Carriers for Remington 870 will also fit the Remington semi-automatics (except right-side carriers). ** 20 inch Remington rails with no clamps require magazine or barrel clamp to support front of rail.
22
MESA TACTICAL CATALOG #20
STOCK MOUNT SURESHELL SHOTSHELL CARRIERS Benelli Stock mount Our Stock Mount SureShell carriers fit on most Benelli pistol grip fixed stocks. The rugged stamped steel SureShell bracket replaces the stock’s sling loop and mounts four additional shells securely on the side of the stock (does not fit on Benelli M4 stocks, nor will this shell carrier fit on the Urbino Tactical stock). This assembly is also available with an H&K style (dog leash) hook loop opposite the shell carrier instead of the webbing loop.
#91840 Stock Mount SureShell Carrier for Benelli M1/M2 (4-shell, 12-GA)
SureShell Aluminum Shotshell Carriers for the Urbino Tactical stock Urbino Tactical stocks with cheek risers can accept SureShell carriers secured right on to the cheekpieces themselves. As with our other SureShell products, these shell carriers feature all aluminum construction.
#90160 SureShell Carrier for Urbino Cheek Riser (4-shell, 12-GA, Left Side)
M4 SOPMOD Buttstock Mount SureShell Aluminum Shotshell Carriers SureShell carriers are also available for the M4 SOPMOD buttstocks (the kind that we supply with our telescoping stock kits). Offered in four- and six-shell versions, these fit securely to standard M4 SOPMOD style stocks from Mesa Tactical as well as other suppliers. Though designed to be installed on the right side of the buttstock, they can be inverted and installed on the left
#93340 SureShell Carrier for M4 SOPMOD Stock (4-shell, 12-GA, Right Side)
STOCK MOUNT SURESHELL SHOTSHELL CARRIERS / 12 GAUGE Platform
Shells
Side
Weight
Export
MSRP
91840
Part #
Stock Mount SureShell Carrier
Item
Benelli Stock (not M4)
4 shell
-
8 oz
NLR
$55.00
91830
Stock Mount SureShell Carrier (Hook Loop*)
Benelli Stock (not M4)
4 shell
-
8 oz
NLR
60.00
90140
Stock Mount SureShell Carrier
Urbino Riser
4 shell
Right
7 oz
NLR
65.00
90160
Stock Mount SureShell Carrier
Urbino Riser
4 shell
Left
7 oz
NLR
65.00
90150
Stock Mount SureShell Carrier
Urbino Riser
6 shell
Right
9 oz
NLR
70.00
90170
Stock Mount SureShell Carrier
Urbino Riser
6 shell
Left
8 oz
NLR
70.00
93340
Stock Mount SureShell Carrier
M4 SOPMOD Stock
4 shell
Right
7 oz
NLR
65.00
93350
Stock Mount SureShell Carrier
M4 SOPMOD Stock
6 shell
Right
9 oz
NLR
70.00
* This item includes an H&K style hook loop on the opposite side from the shell carrier instead of the standard 1 inch sling loop.
www.MESATACTICAL.com
23
BARREL AND MAGAZINE CLAMPS mounting points for lights, sling • Provides attachments or other accessories • CNC Machined from 6061-T6 aluminum be used to more securely support • Can aftermarket magazine tube extensions
The Mesa Tactical Magazine Clamp can be used to more securely retain aftermarket or factory magazine extensions, while at the same time offering flexible accessory mounting options near the shotgun muzzle. Magazine clamps are available with a push-button quick release sling swivel or a two inch MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that can accept standard weapon light mounts.
#92690 Barrel Clamp with Rail for Mossberg 930 (12-GA)
The Magazine Clamp can also be used to mount one inch diameter weapon lights simply by clamping one side to the shotgun barrel and the other side to the light body (recommended for use with shotguns with tall front sight posts only). #90810 Magazine Clamp with Rail for Rem 870 (weapon light not included)
Our Barrel Clamp offers an accessory mount point for shotguns that do not have extended magazines. Its unique clamping mechanism ensures a secure fit even under recoil. Mesa Tactical Magazine and Barrel Clamps can accept accessories made for Mesa Tactical Stock Adapters, including Mesa Tactical Adapter Mount Rails (see page 28).
#90650 Magazine Clamp with Sling Swivel for Rem 870
BARREL AND MAGAZINE CLAMPS / 12 GAUGE Part # 90650
Item Magazine Clamp
Platform Rem 870/1100/11-87
Rail -
Swivel Clamp Type Yes Magazine
90700
Barrel Clamp
Rem 870/1100/11-87
Yes
-
90800
Magazine Clamp
Rem 870/1100/11-87
-
-
Weight 4 oz
Export NLR
MSRP 75.00
Barrel
3 oz
NLR
90.00
Magazine
3 oz
NLR
$65.00
90810
Magazine Clamp
Rem 870/1100/11-87
Yes
-
Magazine
4 oz
NLR
90.00
92660
Magazine Clamp
Mossberg 930
-
-
Magazine
3 oz
NLR
65.00
92670
Magazine Clamp
Mossberg 930
-
Yes
Magazine
4 oz
NLR
75.00
92680
Magazine Clamp
Mossberg 930
Yes
-
Magazine
4 oz
NLR
90.00
92690
Barrel Clamp
Mossberg 930
Yes
-
Barrel
3 oz
NLR
90.00
93920
Magazine Clamp
Rem 870/1100/11-87
Yes
Yes
Barrel
4 oz
NLR
100.00
93930
Magazine Clamp
Mossberg 930
Yes
Yes
Barrel
4 oz
NLR
100.00
24
MESA TACTICAL CATALOG #20
PICATINNY RAILS
• MIL-STD-1913 Picatinny Rails • CNC Machined from 6061-T6 aluminum • Receiver mount and saddle mount styles available • All necessary mounting hardware is included
Mesa Tactical provides two methods for mounting Picatinny rails to tactical shotguns. For Remington shotguns, we offer the Mesa Tactical Saddle Rail, which mounts to both sides of the receiver and wraps around the top. Top mount rails work with Remington, Mossberg and Benelli shotguns that feature factory tapped rail mounting holes in the top of the receiver. All Mesa Tactical Picatinny rails are machined from 6061-T6 aircraft quality aluminum, and finished with mil-spec Type III hard anodizing. Mesa Tactical Picatinny rails include all necessary mounting hardware.
#90770 Picatinny Rail for Mossberg 500/590 (Standard Profile, 4 1/2 inch)
Receiver mount Picatinny rails Receiver-mount rails are made to be mounted onto the receivers of Remington, Mossberg, and Benelli shotguns with pre-drilled and tapped mounting holes. These rails can be used with custom drilled and tapped weapons.
www.MESATACTICAL.com
25
Remington saddle rails Mesa Tactical Saddle Rails are 6061-T6 aluminum brackets that wrap around the top of the shotgun receiver. The factory trigger pins are replaced by an internally threaded steel pin (in the rear) and paired Chicago screws (up front), to which both sides of the saddle rail are securely bolted. The saddle rail is Type III anodized for a rugged surface finish.
#91620 Saddle Rail for Remington (12-GA, 5 in)
#91680 Saddle Rail for Remington with Magazine Clamp (12-GA, 20 inch)
#92150 Side Mount Picatinny Rail for Remington 870 (Right Side) (weapon light not included)
26
Our Saddle Rail is specially contoured to allow operation of a semi-automatic bolt on the right side of the receiver, so it can be installed on Remington 1100 and Remington 11-87 semi-auto shotguns as well as Remington 870 pump shotguns. The rail is notched at the rear to accommodate Scattergun/Wilson style ghost ring sights, and extends to the front of the shotgun receiver (5 inch rail), 2¾ inches past the front of the receiver (8½ inch rail), or just beyond the barrel’s magazine lug (20 inch rail). The 20 inch rails are available with or without the required Magazine Clamp or Barrel Clamp. No gunsmithing is required to install. Minor fitting of fasteners may be necessary. See page 20 for SureShell Saddle Rails that feature a four-, six- or eight-shot SureShell aluminum shotshell carrier yoke on the left side of the receiver.
Remington side-mount rail Recently Mesa Tactical was asked by several law enforcement agencies to produce a Picatinny rail that can be mounted on the right side of the Remington 870 and allow a weapon light to be secured behind the ejection port. This is for door breachers who need more light in tight quarters where lights near the muzzle would be unsuitable. We also offer a rail for the left side of the receiver. These rails are compatible with SureShell carriers mounted on the opposite side of the receiver. As with all our rails, these are machined to the MIL-STD 1913 specification from 6061-T6 aluminum, and features a mounting system similar to that of our SureShell aluminum shotshell carriers.
MESA TACTICAL CATALOG #20
Rails for drilled and tapped receivers Mesa Tactical makes Picatinny rails for several popular shotgun models that feature pre-drilled and tapped holes in the tops of their receivers. Top rails for the Remington 870 use the tactical hole pattern introduced on some tactical 870 models in the summer of 2007. Mossberg rails attach directly to the receivers of late- model (1997 and later) Mossberg pump shotguns with pre-tapped holes. The 20 inch rails are anchored at the front by a magazine clamp that features either a short length of Picatinny accessory rail at the bottom, or a sling swivel stud. The front clamp interferes with the barrel lug on 18 inch Mossberg 590s, and so are incompatible with these platforms. Twenty inch Mossberg 590s fit just fine, however.
#92390 Aluminum Picatinny Rail for Benelli M2 Tactical
The hardware included with the Remington and Mossberg rails are for pump action shotguns. They can be used with semi-auto versions (Remington 1100 and Remington 11-87, or Mossberg 930) by grinding the fasteners down to the appropriate lengths. Rails for the Benelli M2 Tactical and Benelli SuperNova Tactical mount just forward of the ghost ring sights, extending to the front of the receiver. Benelli M2 Tactical rails can also be installed on round-top Benelli M1 receivers after drilling and tapping the top of the shotgun receiver with #8-40 threads. Consult a gunsmith.
#94500 Picatinny Rail for Kel-Tec KSG (12-GA, 13 in, 18 in barrel)
The Picatinny optics rail for the Kel-Tec KSG features small aluminum flanges on either side of the main rail that can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (accessory rail not included, see immediately below). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun.
The Picatinny optics rail for the Kel-Tec KSG features small aluminum flanges on either side of the main rail that can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (accessory rail not included, see immediately below). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun.
www.MESATACTICAL.com
#93540 Picatinny Rail for Mossberg 500 with Pic Rail Clamp (12-GA, 20 inch)
27
ADAPTER MOUNT PICATINNY RAIL Adapter Mount Picatinny Rails fasten to the accessory mount points on the sides of Mesa Tactical High-tube telescoping stock adapters, not on the shotgun receiver. They can also be used on the sides of our Barrel Clamps, Magazine Clamps and clamps used as front mount points for 20 inch and 24 inch rails, which feature the same mounting hole pattern as our stock adapters; or our Picatinny rails for the Kel-Tec KSG shotgun. #91130 Adapter Mount Standard Profile Picatinny Rail (3 1/2 inch)
28
Standard profile rails adhere to the minimum height requirement of the MIL-STD-1913 (NATO STANAG 4694) specification, and should not be used for mounting optics with the High-tube telescoping stock adapters.
MESA TACTICAL CATALOG #20
#90020 Adapter Saddle Mount Pic Rail with Magazine Clamp for Remington (12-GA, 24 inch)
PICATINNY RAILS Part #
Item
Platform
Length
Mount
Clamp
Weight
Export
MSRP
90690
Picatinny Rail
-
2 in
Adapter, Clamp
Location Caliber
-
-
-
1 oz
NLR
$25.00
91110
Picatinny Rail
-
7 1/2 in
Adapter, Clamp
-
-
-
3 oz
NLR
40.00
91120
Picatinny Rail
-
5 1/2 in
Adapter, Clamp
-
-
-
2 oz
NLR
35.00
91130
Picatinny Rail
-
3 1/2 in
Adapter, Clamp
-
-
-
2 oz
NLR
30.00
REMINGTON
90010
Picatinny Rail
Rem 870
24 in
High-tube
Top
12-GA
Barrel
23 oz
NLR
200.00
90020
Picatinny Rail
Rem 870
24 in
High-tube
Top
12-GA
Magazine
24 oz
NLR
200.00
90440
Picatinny Rail
Rem 870
24 in
High-tube
Top
12-GA
None
21 oz
NLR
145.00
90980
Picatinny Rail
Rem 870/1100/11-87
20 in
Receiver
Saddle
12-GA
Barrel
21 oz
NLR
200.00
90990
Picatinny Rail
Rem 870/1100/11-87
20 in
Receiver
Saddle
12-GA
None
20 oz
NLR
145.00
91620
Picatinny Rail
Rem 870/1100/11-87
5 in
Receiver
Saddle
12-GA
-
8 oz
NLR
85.00
91670
Picatinny Rail
Rem 870/1100/11-87
8 1/2 in
Receiver
Saddle
12-GA
-
10 oz
NLR
100.00
91680
Picatinny Rail
Rem 870/1100/11-87
20 in
Receiver
Saddle
12-GA
Magazine
22 oz
NLR
200.00
92150
Side Mount Pic Rail
Rem 870
6 in
Receiver
Right Side
12-GA
-
3 oz
NLR
60.00
92350
Side Mount Pic Rail
Rem 870/1100/11-87
2 1/2 in
Receiver
Left Side
12-GA
-
4 oz
NLR
60.00
92370
Picatinny Rail
Rem 870/1100/11-87
5 in
Receiver
Top
12-GA
-
2 oz
NLR
35.00
92380
Picatinny Rail
Rem 870/1100/11-87
8 1/2 in
Receiver
Top
12-GA
-
3 oz
NLR
50.00
93900
Picatinny Rail
Rem 870
9 1/2 in
Adapter
Top
12-GA
-
13 oz
NLR
65.00
MOS S BERG
90460
Picatinny Rail
Moss 500/590
24 in
High-tube
Top
12-GA
Pic Rail
23 oz
NLR
215.00
90470
Picatinny Rail
Moss 500/590
24 in
High-tube
Top
12-GA
Swivel
23 oz
NLR
215.00 45.00
90760
Pic Rail (Tall Profile)
Moss 500
4 1/2 in
High-tube
Top
12-GA
-
3 oz
NLR
90770
Picatinny Rail
Moss 500/590
4 1/2 in
Receiver
Top
12-GA
-
2 oz
NLR
40.00
93540
Picatinny Rail
Moss 500/590
20 in
Receiver
Top
12-GA
Pic Rail
23 oz
NLR
215.00
93550
Picatinny Rail
Moss 500/590
20 in
Receiver
Top
12-GA
Swivel
23 oz
NLR
215.00
93910
Picatinny Rail
Moss 500
9 1/2 in
Adapter
Top
12-GA
-
14 oz
NLR
65.00
BENELLI
92390
Picatinny Rail
Benelli M2
4 1/2 in
Receiver
Top
12-GA
-
2 oz
NLR
45.00
92400
Picatinny Rail
Ben Supernova
5 1/2 in
Receiver
Top
12-GA
-
3 oz
NLR
45.00
Top
12-GA
-
23 oz
NLR
170.00
KEL-TEC
94500
Picatinny Rail*
* For Kel-Tec KSG with 18 inch barrel.
Kel-Tec KSG
13 in
Receiver
** Tall profile rails are exclusively for use with Mesa Tactical High-Tube AR adapters.
www.MESATACTICAL.com
29
HOOK LOOPS MAGAZINE EXTENSION HOOK LOOPS Some shotgun magazine extensions include stamped steel sling plates secured in place by retaining clips. We have produced replacement stampings that feature a circular hook loop instead of the sling loop for use with increasingly popular H&K style (dog leash) sling hooks.
#90730 Ambi Hook Loop for Magazine Extension (Vang Comp, 12-GA)
Our Magazine Extension Hook Loops are available for the Benelli M2 and Benelli M4 shotguns, as well as Vang Comp magazine extensions for Remington shotguns (before you ask, the Scattergun/Wilson Combat sling loops are permanently installed and cannot be replaced with hook loops). Magazine Extension Hook Loops feature a tough milspec manganese phosphate finish. Ambi style sling attachments feature mounts on both sides of the receiver. Special retainer clip pliers are required for installation!
REAR HOOK LOOPS FOR BENELLI TACTICAL STOCKS Factory tactical stocks for most Benelli shotguns include a stamped steel sling plate in the center of the stock. We have produced a replacement stamping that features a circular hook loop instead of the sling loop for use with H&K style (dog leash) sling hooks. #91410 Rear Hook Loop for Benelli Tactical Stocks (except Benelli M4)
HOOK LOOPS Part #
Export
MSRP
90670
Magazine Extension Hook Loop
Rem Vang Comp
12-GA
-
H&K Hook
1 oz
NLR
$10.00
90730
Magazine Extension Hook Loop
Rem Vang Comp
12-GA
Yes
H&K Loop
3 oz
NLR
10.00
90750
Magazine Extension Hook Loop
Benelli M2
12-GA
-
H&K Loop
1 oz
NLR
10.00
90790
Magazine Extension Hook Loop
Benelli M2
12-GA
Yes
H&K Loop
3 oz
NLR
10.00
90820
Magazine Extension Hook Loop
Benelli M4
12-GA
-
H&K Loop
1 oz
NLR
10.00
91270
Magazine Extension Hook Loop
Benelli M4
12-GA
Yes
H&K Loop
3 oz
NLR
10.00
91410
Rear Hook Loop for Ben Tac Stocks (except Benelli M4)
Benelli (not M4)
12-GA
-
H&K Loop
1 oz
NLR
10.00
91190
Push Button Sling Swivel for 1 1/4 inch Webbing
-
-
-
Push Button
1 oz
License
12.00
30
Item
Our Rear Hook Loop fits all Benelli platforms except the Benelli M4 (in which the sling plate is actually glued in place), and features a tough mil-spec manganese phosphate finish.
Platform
Caliber Ambidextrous Sling Style Weight
MESA TACTICAL CATALOG #20
Mesa Tactical Logo and Shells Short Sleeved Tee (White on Army Green)50075 SM, 50076 MD, 50077 LG, 50078 XL, 50079 XXL
Mesa Tactical SMOKING GUN Short Sleeved Tee (Black, Front and Back Print)50085 SM, 50086 MD, 50087 LG, 50088 XL, 50089 XXL
Mesa Tactical SMOKING GUN Short Sleeved Tee (Back Imprint)
WEAR ’EM PROUD!
Mesa Tactical Logo and Shells Short Sleeved Tee (White on Charcoal)50080 SM, 50081 MD, 50082 LG, 50083 XL, 50084 XXL
Like all Mesa Tactical products, these T-shirts are proudly made in the USA and feature Mesa Tactical’s renown logo— a recognized symbol of hard use, professional grade tactical products. T-Shirts are available in black, charcoal and olive drab with multiple logo designs and sizes.
HARDWEAR
Mesa Tactical Logo and Shells Short Sleeved Tee (White on Black)- 50070 SM, 50071 MD, 50072 LG, 50073 XL, 50074 XXL
www.MESATACTICAL.com
31
1135 Baker Street Costa Mesa, CA 92626