Activities 01-Competition of Acrylic 02-Plaster study 03-Triangle Surface Study
2013
Preface Small experimental activities : It like a small workshop 01.Competition : Rethink this material through the soft fabric weave it engages. 02.Material : Rethink Plaster & Mold. 03.3d Printer : Use the 3d Printer created the Components to connect other material. 04-Exhibition : Try something of possibility of the New Chinese type.
Contents 01- Competition of Acrylic Prism & Dive to
02- Plaster study Tower of Prism
03- Triangle Surface Study Multilateral Triangle
01 Acrylic Competition of Acrylic 29 November 2012
About Prism
About Dive To
L/W/H: 0.5 X 0.3 X 1.2 m
L/W/H: 3.0 X 2.5 X 2.5 m
Two triangular geometry unit on top of one another on the bottom surface showing reversed, resulting in rotating tower structure.
Use triangular geometry unit surface rendering, produces an uneven surface similar to the shape of the waves, the use of acrylic wash wear characteristics, construct a similar dynamic illusion constitution.
1. The use of the triangular acrylic unit and plastic woven cloth lampshade planar surface. 2. Design of cutting the texture triangle acrylic surface, causing refraction effect of glare. 3. adjustable shade, placed in the top of the triangular frame lighthouse with support rods, adjustable shade length, change the length of the triangle unit also produces irregularities type variable, light through acrylic textures, produce scattering and diffuse effect.
1. The use of the triangular acrylic units and plastic sheeting woven into space planar device. 2. Design of cutting the texture triangle acrylic surface, causing refraction effect of glare. 3. With the hard texture of soft acrylic fabric twisted reproduction, resulting in a special visual senses.
02 Plaster Tower of Prism 10 January 2013 L/W/H: 10 X 08 X 30 cm
The concept of making a triangle vase, And try to tune the color of the inside of plaster powder. First, draw a triangle on the PVC plate tangent (not cut), but must be adjusted with the thickness of the material.After the board cutted is complete, random adjustment the shape of the mold. Then, the toner to the plaster powder in accordance with the appropriate ratio, stiffness, water, liquid plaster into the mold . (Note: The agitation must be gentle stirring and crushed powder, to avoid bubble generation, and then watering process, must tap the upper and lower molds)
Material Experiment Soft surface By Pvc board + Plaster . Triangular grid. Study process. Making Mold process of manufacture
03 Surface Triangle Surface study 10 August 2013 Study from Parametric Architec: Chih-Chien Peng
Material Experiment The Note of Triangular grid making by 3D Printer + plastic pipe. Study process.
Study Model process of manufacture
03 Surface Triangle Surface study 10 August 2013 Study from Parametric Architec: Chih-Chien Peng
Material Experiment The Note of Triangular grid making by 3D Printer + plastic board. Study process.
Study Model process of manufacture