Sideco specialty coaters general presentation 2014

Page 1

Innovation and excellence in coating applications.


Coating machinery and equipments. Our company designs, fabricates and installs rotary coating

machines for substrates of various nature such as: rigid or extensible plastic films, paper and carton, textile and nonwoven. Our systems enable coating of a wide range of products decorative, abrasive, thermo-reactive, protective, adhesives etc. In addition to different product applications our lines also enable process of different substrates, by subsequent pass or in one single pass with the configuration of multiple stations one after the other, as well as lamination of films having different nature and properties.


Type and characteristics of the coating heads. The coating heads are chosen according to the application required. We

offer systems like: direct or indirect gravure,, Mac-Roll, Meyer Bar, multiple metering rollers (solventless-silicone), hot-melt slot and spray, flexo etc.. Only as a general reference the chart below shows some of the coating applications available with their approximate coat-weight range. However we highlight that the coating heads are chosen also considering other factors such as the products to process and the substrates to coat, therefore in certain conditions they may deliver different quantities from those reported or even result not adequate for specific applications.


Modular structure and flexibility. We also offer combined

stations with interchangeable coating units, such as the cartridge type system that permit easy and quick application system changeover. The combination type stations consequently provide the possibility to apply different products with a single coating station, or to extend the application flexibility on the lines equipped with multiple coating stations.


Modular structure and flexibility. According to the range of products to be obtained on the same

line, the machines may integrate multiple modules that enable applications and processes one after the other in one single pass. The control systems used are obviously a consequence of the machine configuration and the type of processes to perform. Sometimes it may result possible to extend the range of products to obtain with the same line when this is equipped with the necessary control and handling systems, or alternatively integrate them in order to achieve such target. It’s possible for example to use the same machine for the production of protective films as well as some adhesive tapes, or to use the same line for lamination of substrates of different nature. Our experts will be able to indicate the possibilities offered by each line according to its configuration and following to the inquiries from case to case, and in any event to suggest further integrations or possible extensions within reasonable cost and according to the initial budget of investment.


Winding systems. Our lines are equipped with a range of winding systems that we

can also offer as stand alone modules to be fitted on existing lines or other machines. We offer unwind and rewind units, single or multiple spindle type, with manual splice, semi-automatic or fully automatic. The spindles can be equipped with supporting core shafts or lateral supports without the use of a wide shaft (shaft-less). The rewind unit model RCP, particularly recommended for the lines that need minimum scrap such as for the production of protective films and adhesive tapes, enable flying splice without “tale” left on the reel ,and with cycles reduced to the minimum time of approximately 50 seconds permitting production of little “logs” directly on the line and eliminating subsequent off-line further rewind. This model integrates also the possibility of winding with different modes according to the needs such as the centre, centre-peripheral, peripheral and gap control. To complete the range, we offer reels or cores loading systems with automatic cycles that reduce drastically manual operations for change-overs and reduce them to minimum cycles time.


Hot melt adhesive tapes.

Coating and lamination line for Hot Melt Tapes (Bopp, Masking, PE, DUCT tape, Hot Melt Adhesives preparation Paper, etc) plant.


Hot melt adhesive tapes.

Coating and lamination line for Hot Melt Tapes (Bopp, Masking, PE, DUCT tape, Paper, ecc)


Hot melt adhesive tapes.

Hot Melt Adhesives preparation plant.


Solvent based adhesive tapes and specials.

Bopp, PVC, Cellophan, Masking, etc.


Solvent based adhesive tapes and specials.

Coating and lamination line for Protective Pe,Bopp, PVC, Cellophan, Masking.


Protective films. All our lines for protective films are able to process polyethylene from a minimum thickness of 20 microns, with adhesives solvent or water based, thus covering all market needs. The coating applications are interchangeable by cartridge system, with head type automatic recognize detection, in order to grant flexibility and change-over efficiency. The rewind unit is “low scrap type�, our model RCP, with the possibility to work with different modes such as centre, centreperipheral, surface or gap control type and the option of the automatic pre-glued cores loading system on the shafts.


Protective films.

Water and solvent based coating and lamination line for PE protective film and special tapes with in-line printing.


Protective films.

Water and solvent based coating and lamination line for PE protective film and special tapes with in-line printing.


Protective films.

Water and solvent based coating and lamination line for PE protective film and special tapes.


Protective films.

Water and solvent based coating and lamination line for PE protective film and special tapes.


Protective films.

Water and solvent based line for PE protective film and special tapes.


Protective films.

Water and solvent based line for PE protective film and special tapes.


Protective films.

Water and solvent based line for PE protective film and special tapes with in-line printing unit.


Protective films.

Water and solvent based line for PE protective film and special tapes with in-line printing unit.


Thermo-reactive, silicone and auto-adhesive coated papers. Coating and calendering in-line unit.

Chemicals grinding plant

laboratory

Termo-reactive coating preparation plant.


Thermo-reactive, silicone and auto-adhesive coated papers.

Auto-adhesive and thermo-reactive paper printing, silicone coating, and lamination line.


Composites.

Hot melt and solvent based coating lines for PRE-PREG materials


Hot laminates.

3 layers hot lamination 2 layers hot lamination


Hot laminates.

2 layers hot lamination

3 layers hot lamination


Wax preparation.

Vaschetta riscaldata

Melting plant with wax storage and automatic filter with thermic oil heating system.


Wax preparation.

Melting plant with wax storage and automatic filter with thermic oil heating system.


Extrusion chill rollers.

Film callipering rollers for die head extrusion plant.


Unwinders.

Shaft-less turret flying splice unwinder 1000 mm. diameter and 2800 mm. width Turret flying splice unwidner 1270 mm. diameter

Shaft-less turret flying splice unwinder 1000 mm. diameter and 2800 mm. width


Rewinders.

No scrap flying splice rewinder RCP.


Shaft-less rewinders.


Rewinders.

Double winding flying splice rewinder.

Turret flying splice rewinder.


SIDECO S.r.L. Via G. Verdi, 15 20865 Usmate Velate (MB) Italy

tel. +39-039-674515 fax +39-039-675265 e-mail: info@sidecosrl.eu Website: www.sidecosrl.eu


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.