2013 UN Packaging Spring 2013

Page 1

UN Packaging-Cover_Layout 1 2/26/13 8:17 AM Page 1

UN PACKAGING GUIDE

Spring 2013

800.621.5808 labelmaster.com


2013 UN Packaging Mini Spring-Base WP 2-3 P 2-3_Standard 2/21/13 4:04 PM Page 2

PA C K A G I N G

VA R I AT I O N T W O P E R F O R M A N C E P L U S ® S H I P P E R S

6 x 8 oz. UN 4GV/X3.3/S

2 x 8 oz. Components Included

UN 4GV/X1.3/S

9 x 8 oz. 4 x 8 oz. UN 4GV/X2.3/S

• • • • •

UN marked fiberboard box Fiberboard insert for 8-oz. (or less) containers Fiberboard pads Absorbent-lined bags Tape

UN 4GV/X4.9/S

1 x 1L UN 4GV/X2.3/S

Components Included

• UN marked fiberboard box • Fiberboard insert for 1L (or less) container • Fiberboard pads • Absorbent-lined bag • Tape

2 x 1L 4 x 1L

UN 4GV/X4.4/S

UN 4GV/X8.5/S

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

2

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 2-3 P 2-3_Standard 2/21/13 4:04 PM Page 3

VA R I AT I O N T W O P E R F O R M A N C E P L U S ® S H I P P E R S

PA C K A G I N G

Components Included

500ml UN 4GV/X1.6/S

• UN marked fiberboard box • XEBEC™ vermiculite pouch • Tape

950ml UN 4GV/X2.8/S

Components Included

• • • • • • •

11" tall can and ring lock UN marked fiberboard box Fiberboard insert Foam cushioning Absorbent pads Liner bag Tape 32 oz. UN 4GV/X3.6/S

Variation two ShipperS Internationally recognized 4GV certification allows you to use a wide variety of primary containers. These flexible shippers allow you to use your own inner container. • Packing Groups I, II and III liquids and solids • UN4GV33 includes a can with a ring lock that passes hydrostatic pressure test for use in air shipments

• For all packages on this page with the exception of UN4GV33, to ship by air your container must pass a valid hydrostatic pressure test

• Meets Procedure 1A requirements • Sold individually

Prices per each Style

UN4GV2X8A UN4GV4X8A UN4GV6X8A UN4GV9X8A UN4GV1X32A UN4GV2X32A UN4GV4X32A UN4GV500 UN4GV950 UN4GV33

#Inner Containers

Capacity

Size (O.D.)

Assembly

Gross Mass

Weight

1

26

2 4 6 9 1 2 4 1 1 1

8 oz. 8 oz. 8 oz. 8 oz. 1L 1L 1L 500ml 950ml 32 oz.

10"L x 613/16"W x 81/8"H 10"L x 10"W x 81/8"H 133/16"L x 10"W x 81/8"H 133/16"L x 133/16"W x 81/8"H 81/4"L x 81/4"W x 137/8"H 141/4"L x 81/4"W x 137/8"H 141/4"L x 141/4"W x 137/8"H 63/8"L x 73/4"W x 11"H 713/16"L x 713/16"W x 121/2"H 103/4"L x 103/4"W x 171/2"H

Unassembled Unassembled Unassembled Unassembled Unassembled Unassembled Unassembled Unassembled Unassembled Assembled

1.3kg 2.3kg 3.3kg 4.9kg 2.3kg 4.4kg 8.5kg 1.6kg 2.8kg 3.6kg

.62 lbs .85 lb. 1.01 lbs. 1.35 lbs. .87 lb. 1.21 lbs. 1.9 lbs. .37 lb. 1 lb. 1.49 lbs.

$11.12 $18.00 $26.86 $39.53 $12.89 $22.35 $33.57 $9.59 $11.05 $25.75

$10.50 $16.98 $25.34 $37.30 $12.15 $21.08 $31.67 $8.23 $10.17 $25.24

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

3


2013 UN Packaging Mini Spring-Base WP 4-5 P 4-5_Standard 2/25/13 4:24 PM Page 4

VA R I AT I O N T W O PA C K A G I N G

PA C K A G I N G

Variation two boxes • Boxes can be used to ship any type of inner container for Packing Groups I, II or III liquids or solids by any mode of transportation • Flexible packages may also be used to ship "articles" including machine parts and batteries • Packages require grade 2A vermiculite • All boxes meet the requirements of ISTA Procedure 1A • For air shipments, the inner packages must pass a valid hydrostatic pressure test • See bottom of page for components that must be used with these boxes to ensure compliance with UN regulations • Sold individually

Prices per each

Style

UN4GV6 UN4GV8 UN4GV9 UN4GV10 UN4GV11 UN4GV12 UN4GV13 UN4GV13C UN4GV15C UN4GV19C UN4GV20 UN4GV21R UN4GV23

UN4GV24 UN4GV27 UN4GV45R

Capacity

Vermiculite Needed/Box

Size (O.D.)

Fiberboard Spec.

UN Marking

Weight

1

100

500

1 x 16 oz. 1 x 32 oz. 4 x 16 oz. 1 x 128 oz. 2 x 16 oz. 2 x 16 oz. 2 x 32 oz. or 6 x 8 oz. 4 x 32 oz. 9 x 8 oz. 4 x 950ml 2 x 128 oz. 4 x 128 oz. 20 x 8 oz., 8 x 16 oz., 6 x 32 oz., or 2 x 128 oz. 4 x 128 oz. 4 x 8 oz. 6 x 32 oz.

.25 Cu. Ft. .50 Cu. Ft. .46 Cu. Ft. 1.10 Cu. Ft. .80 Cu. Ft. 1.35 Cu. Ft. .85 Cu. Ft.

7"L x 7"W x 91/2"H 81/8"L x 81/8"W x 141/8"H 95/8"L x 91/2"W x 103/4"H 111/4"L x 111/4"W x 163/4"H 113/8"L X 113/8"W X 12 1/2"H 123/8"L x 123/8"W x 171/2"H 137/8"L x 81/8"W x 165/8"H

200# SW 200# SW 275# DW 275# DW 275# DW 275# DW 275# DW

4GV/X2.5/S 4GV/X4.2/S 4GV/X6.6/S 4GV/11.4/S 4GV/X6.1/S 4GV/X10.5/S 4GV/X6.0/S

.37 lb. .58 lb. .96 lb. 1.53 lbs. 1.33 lbs. 1.8 lbs. 1.36 lbs.

$5.05 $5.42 $6.14 $7.94 $7.62 $9.35 $7.28

$4.30 $4.60 $5.22 $6.75 $6.48 $7.95 $6.19

$2.87 $3.07 $3.48 $4.50 $4.32 $5.30 $4.12

.85 Cu. Ft. 2.45 Cu. Ft. 5 Cu. Ft. 2.45 Cu. Ft. 5.25 Cu. Ft. 2.90 Cu. Ft.

133/8"L x 131/4"W x 133/4"H 151/2"L x 153/8"W x 161/8"H 191/8"L x 191/2"W x 20"H 211/2"L x 121/4"W x 181/4"H 213/8"L x 213/8"W x 211/8"H 233/4"L X 137/8"W X 167/8"H

275# DW 275# DW 275# DW 275# DW 275# DW 275# DW

4GV/X11.0/S 4GV/X14.7/S 4GV/X27.5/S 4GV/X21.1/S 4GV/X36.4/S 4GV/X18.1/S

1.8 lbs. 2.37 lbs. 3.81 lbs. 4.5 lbs. 4.63 lbs. 3 lbs.

$5.44 $7.38 $10.77 $11.20 $15.69 $11.87

$4.53 $6.14 $8.98 $9.52 $13.35 $9.51

$4.12 $5.59 $8.17 $6.32 $8.89 $7.20

6.38 Cu. Ft. 1.50 Cu. Ft. 4.40 Cu. Ft.

231/2"L x 231/2"W x 223/16"H 271/2"L x 81/2"W x 13"H 451/4"L x 121/2"W x 151/4"H

350# DW 275# DW 275# DW

4GV/X39.9/S 4GV/X8.1/S 4GV/X26.3/S

5.8 lbs. 1.9 lbs. 4.04 lbs.

$17.76 $7.68 $14.23

$15.40 $6.53 $12.09

$10.82 $4.35 $8.07

GraDe 2a VerMiCulite Prices per bag

Style

Description

Weight

1

5

10

KTV400A2

4-cu. ft. Bag

12 lbs.

$22.27

$21.83

$21.39

Style

Description

Prices per each pallet

Weight

KTV400-A2 4-cu. ft. Bag, 30 per pallet KTV6400-A2 60-cu. ft. Bulk Bag, 1 per pallet

Grade 2-A Medium

650 lbs. 450 lbs.

1

$668.10 $356.64

5

10

$654.90 $349.51

$640.50 $342.52

shop our website for our full line of vermiculite.

Poly baGs Prices per each

Style

Description

K64365 1.5-mil Gusseted K64464 1.5-mil Gusseted K284674 2-mil Flat K285591 3-mil Flat K286768 4-mil Flat

Size

Weight

1

500

10"L x 4"W x 18"H 10"L x 8"W x 24"H 28"L x 40"H 48"L x 48"H 40"L x 48"H

.05 lb. .05 lb. .15 lb. .45 lb. .45 lb.

$0.66 $0.80 $0.97 $1.67 $1.25

$0.43 $0.56 $0.73 $1.60 $1.04

Fiber Core For Gallon bottles

3M HeaVy-Duty Carton sealinG taPe Prices per roll

Style

K901375T K901375

Thickness

Size

Color

Weight

1

37

3.2-mil 3.2-mil

2" x 55 yds. 2" x 55 yds.

Tan Clear

.88 lb. .88 lb.

$8.63 $8.63

$7.85 $7.85

Prices per each

Style

Size

Weight

1

KCOREHW 43⁄4" x 4" dia. .05 lb. $1.81

100

$1.67

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

4

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 4-5 P 4-5_Standard 2/25/13 4:24 PM Page 5

VA R I AT I O N T W O I N S U L AT E D S H I P P E R S

PA C K A G I N G

Components Included

• Can and ring lock • Insulated container • UN marked fiberboard box • Absorbent bag • Tape

1 x 1L

4 x 1L

UN 4GV/X23.3/S

UN 4GV/X55.9/S

Components Included

• Insulated container • UN marked fiberboard box • Fiberboard insert • Absorbent bags • Tape

12 x 8 oz.

4 x 32 oz.

NEW LOWER PRICING!

UN 4GV/X20.1/S

UN 4GV/X15.6/S

Variation two insulated shippers Use these shippers to keep frozen or cold shipments at proper temperatures. • 1 x 1-liter and 4 x 1-liter bottle-in-can shippers are suitable for shipping Packing Groups I, II or III and have been tested for use with inner containers of up to 32 oz. inside the 65/8" dia. x 111/8" can. The can with ring lock passes valid hydrostatic pressure tests to 95 kPa for use in air shipments. Gel packs sold separately

• 12 x 8-oz. and 4 x 32-oz. shippers feature thick-walled, high-thermal efficiency foam that keeps your shipment at a controlled temperature longer. A universal absorbent-lined bag makes for easy "no mess" shipping. Shippers are suitable for air shipment when used with inner packagings that pass a valid hydrostatic pressure test. Gel packs sold separately • Sold individually

Insulated Shippers With Can Prices per each

Style

UN4GV155TCR UN4GV455TCR

# Inner Containers

Capacity

Size (O.D.)

Assembly

Weight

1

26

1 4

1L 1L

157/8"L x 157/8"W x 16"H 215/8"L x 215/8"W x 205/8"H

Assembled Assembled

2.66 lbs. 5.56 lbs.

$39.92 $75.00

$36.62 $66.66

Insulated Shippers Without Can Style # Inner Containers

UN4GV1280TCR UN4GV41TCU

12 4

Capacity

Size (O.D.)

Assembly

Weight

1

26

8 oz. 32 oz.

163/4"L x 163/4"W x 16"H 163/4"L x 163/4"W x 16"H

Assembled without Bottles Assembled without Bottles

1.66 lbs. 4.56 lbs.

$61.15 $43.10

$54.35 $38.31

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

5


2013 UN Packaging Mini Spring-Base WP 6-7 P 6-7_Standard 2/22/13 11:58 AM Page 6

PA C K A G I N G

1 7 3 . 1 3 PA C K A G I N G

16 oz. UN 4GV/X2.2/S 32 oz. UN 4GV/X2.7/S

2 x 16 oz. UN 4GV/X4.1/S 2 x 32 oz. UN 4GV/X6.2/S

4 x 16 oz. UN 4GV/X8.2/S 4 x 32 oz. UN 4GV/X12.3/S

173.13 ShipperS This UN performance-tested packaging has been designed in accordance with 49 CFR 173.13. You may ship Class 3, 8 and 9 and Division 4.1, 4.2, 4.3, 5.1 and 6.1 in this package without labels, placards or extra exemption paperwork. Tested with a 4GV rating, you may use any inner container (up to 32 oz.) in 1-, 2- or 4-inner package configurations. Paint can is 11" high to accommodate tall inner containers. Ships fully assembled. • • • •

Use to ship Packing Groups I, II and III liquids or solids Maximum specific gravity 1.8 Sold individually Meets 49 CFR 173.13 packaging design requirements

Components Included

• Paint cans andring ringlock locks • Absorbent material can and bags • Inner and outer • Liner bag fiberboard boxes • Tape

Prices per each

Style

UN4GV-16 UN4GV-32 UN4GV-216 UN4GV-232 UN4GV-416 UN4GV-432

# Inner Container

Capacity

Size (O.D.)

Weight

1

26

1 1 2 2 4 4

16 oz. 32 oz. 16 oz. 32 oz. 16 oz. 32 oz.

711/16"L x 711/16"W x 113/8"H 77/8"L x 77/8"W x 131/8"H 143/4"L x 75/8"W x 12"H 151/4"L x 77/8"W x 131/8"H 143/4"L x 143/4"W x 115/16"H 155/16"L x 155/16"W x 131/8"H

2 lbs. 3 lbs. 4 lbs. 4.5 lbs. 4.5 lbs. 9 lbs.

$19.38 $19.99 $33.45 $40.12 $70.51 $72.47

$18.22 $19.13 $32.01 $38.41 $66.27 $69.40

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

6

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring WP 6-7 P 6-7_• 2/26/13 1:24 PM Page 7

S T U R D E E S E A L ™ C O M B I N AT I O N S H I P P E R S

PA C K A G I N G

500cc 8 oz.

UN 4GV/X4.0/S

STANDARD COMBINATION SHIPPERS

UN 4GV/X1.2/S

950cc UN 4GV/X4.0/S 1 liter UN 4GV/X4.0/S

500cc UN 4GV/X4.0/S

SPECIAL PACKAGES FOR POISONOUS BY INHALATION AND PYROPHORIC MATERIALS

950cc UN 4GV/X4.0/S 1 liter UN 4GV/X4.0/S

SPECIAL PERMIT: DOT-SP-9168

STURDEESEAL™ COMBINATION SHIPPERS Fully assembled packaging gives you the flexibility of using your own inner container (up to 32 oz.) and is accepted by UPS and FedEx as an exemption package. You may ship Class 3, 8 and 9, and Division 4.1, 4.2, 4.3, 5.1 and 6.1 in this package without labels or placards. Components Included • Packing Groups I, II or III materials by all modes of transport • PVC coated glass bottle • Fiber core (for narrow mouth • Maximum specific gravity 2.0 w/Teflon®-lined cap container) • Meets Procedure 1A requirements • Full friction tinplate steel canister • 4-mil polyethylene bag • Special Permit DOT-SP-9168 with welded side seam and lid • Polypropylene tape for cap • Sold individually • UN marked fiberboard, double-wall box and canister • Absorbent pouch • Ring lock (PIH Packages) Prices per each

Style

HMS-08 HMS-500 HMS-950 HMS-33

Capacity

Canister Size

Bottle Opening

Weight

1

12

8 oz. 500cc 950cc 1 liter

311/16" Dia. x 6"H 65/8" Dia. x 101/4"H 65/8" Dia. x 101/4"H 65/8" Dia. x 101/4"H

45mm 53mm 53mm 33mm

2 lbs. 4 lbs. 5 lbs. 5 lbs.

$15.27 $28.88 $31.11 $27.05

$13.88 $26.11 $27.22 $24.44

Special Packages for Poisonous by Inhalation and Pyrophoric Materials Style

HMS-500PIH HMS-950PIH HMS-33PIH

Capacity

Can Size

Bottle Opening

Weight

1

12

500cc 950cc 1 liter

65/8" Dia. x 103/4"H 65/8" Dia. x 103/4"H 65/8" Dia. x 103/4"H

53mm 53mm 33mm

4 lbs. 5 lbs. 5 lbs.

$27.80 $27.05 $29.27

$25.02 $26.66 $26.66

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

7


2013 UN Packaging Mini Spring-Base WP 8-9 P 8-9_Standard 2/26/13 11:41 AM Page 8

O X Y G E N C Y L I N D E R S & G E N E R AT O R PA C K A G I N G

PA C K A G I N G

HM-224B Super BOxeS These containers for oxygen cylinders and oxygen generators have passed 280 cycle drop tests, which closely simulate common handling abuse. Ball corners, latches, hinges and recessed handles are made of the highest quality material. The cylinder valve assembly is protected inside the aluminum container by a removable cradle that is securely tethered to the container and can only be used in the correct position. Container labels, DG labels and airline markings included. • • • • • •

Durable, lightweight aluminum Reusable shipper Reinforced exterior with more than 1,000 industrial-grade rivets Side-load design allows you to reach into the container unobstructed Sold individually Meets 49 CFR 173.168 requirements Prices per each

Size (O.D.)

Style

211/4"L x 111/2"W x 11"H KSBOX04 KSBOX11 311/4"L x 111/2"W x 11"H KSBOX49 351/4"L x 131/4"W x 131/4"H 413/4"L x 14"W x 14"H KSBOX76 KSBOX115 413/4"L x 151/2"W x 151/2"H

ALL ITEMS IN STOCK!

Max. Bottle Size Bottle Cu. Ft. Weight

33/5" Dia. x 13"L 33/5" Dia. x 23"L 69/10" Dia. x 281/10"L 73/5" Dia. x 343/5"L 91/10" Dia. x 342/5"L

4.25 11 49 76 115

30 lbs. 37 lbs. 50 lbs. 59 lbs. 68 lbs.

1

$721.00 $875.50 $1,081.50 $1,158.75 $1,210.25

HM-224B BOeinG 787 Super BOxeS These containers meet higher performance standards for shipping Boeing 787 Dreamliner Passenger Service Units by air. These containers for high psi oxygen cylinders have passed 280 cycle drop tests, which closely simulate common handling abuse. Ball corners, latches, hinges and recessed handles are made of the highest quality material. Container labels, DG labels and airline markings included. • • • • • •

Durable, lightweight aluminum Reusable shipper Reinforced exterior with more than 1,000 industrial-grade rivets Side-load design allows you to reach into the container unobstructed Sold individually Meets 49 CFR 173.168 requirements Prices per each

Style

Size (O.D.)

KSBOX787-4 KSBOX787-12

Size (I.D.)

Weight

261/2"L x 22"W x 221/2"H 144/5"L x 141/2"W x 18 31/50"H 75 lbs. 26"L x 211/2"W x 46"H 40"L x 131/2"W x 18"H 100 lbs.

1

$2,050.00 $3,675.00

OxyGen GenerAtOr BOxeS

All Styles

Additional Oxygen Generator Boxes available at labelmaster.com

UN 4G/X34.9/S

An affordable solution for the air shipment of oxygen generators that must be placed in a rigid outer packaging. These shipping containers are designed for air shipment of oxygen generators, protective breathing equipment and passenger service units. All required container labels, DG labels and airline markings are included. • DOT31FP/HM224B-compliant, corrugated fiberboard • Sold individually • Meets 49 CFR 173.168 requirements

Prices per each

Style

KBXG103 KBXG101 KBXG102 KBXG003 KBXG001 KBXG104 KBXG002

Size (I.D.)

Max. Inner Packaging (O.D.)

Recommended Inner Mfr.

Weight

95/8"L x 55/8"W x 121/4"H 123/4"L x 123/4"W x 161/2"H 17"L x 131/8"W x 163/4"H 207/8"L x 113/8"W x 141/4"H 217/8"L x 147/8"W x 161/2"H 257/8"L x 101/8"W x 131/2"H 407/8"L x 147/8"W x 161/2"H

83/4"L x 43/4"W x 101/4"H 117/8"L x 117/8"W x 141/2"H 161/8"L x 121/4"W x 143/4"H 20"L x 101/2"W x 121/4"H 21"L x 14"W x 141/2"H 25"L x 91/4"W x 111/2"H 40"L x 14"W x 141/2"H

Capacity up to AVOX 1 pack PBE Capacity up to AVOX 4 pack Capacity up to AVOX 12 pack Capacity up to B/E 6 pack COG Capacity up to B/E 6 pack COG Capacity up to AVOX 3 pack PBE Capacity up to B/E 12 pack COG

1.6 lbs. 3.9 lbs. 4.3 lbs. 4.5 lbs. 5.6 lbs. 2.2 lbs. 8.7 lbs.

1

$153.06 $173.49 $181.53 $180.21 $193.17 $183.42 $240.35

10

$132.46 $152.79 $160.93 $159.61 $172.57 $162.82 $232.60

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

8

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 8-9 P 8-9_Standard 2/26/13 11:42 AM Page 9

U N M A R K E D W O O D E N C R AT E S

PA C K A G I N G

Wooden Crates Wooden crates are an excellent choice when you're shipping heavier articles such as machine parts and batteries. To meet testing specifications, vermiculite or Bubble Wrap® must be used for cushioning. Crates come with liner bags and nails/screws. Sold individually.

Style KW1632B UN 4D/X32/S (solids/articles) UN 4DV/X23.7/S (liquids/solids/articles)

Style KW1700

Style KW1800BR

UN 4D/Y76.4/S

UN 4D/Y66.6/S

ALL ITEMS IN STOCK!

FYI Wooden Box Shippers meet European Union standards pertaining to the Pinewood Nematode.

Style KW2400 UN 4D/Y93/S

Style KW2000B UN 4D/X85/S

Style KW5000

Style KW3000A

UN 4D/Y223/S

UN 4D/X112/S (1 article) UN 4D/X95.6/S (50 articles)

Check closure instructions for cushioning requirements. Bubble Wrap® is a registered trademark of Sealed Air Corporation (US). Prices per each

Style

KW1632B KW1700 KW1800BR KW2000B KW2400 KW5000 KW3000A

Capacity

Size (L x W x H)

Packing Group

Weight

Solids: 17.9kg, Articles: 1 15.4kg, Liquids: 4 32 oz. Articles: 1 61kg, Articles: 30 2kg Solids: 48.76kg, Articles: 1 38.6kg Solids: 57kg, Articles: 1 57kg Articles: 1 62.5kg, Articles: 50 1.25kg Solids: 182.8kg Articles: 1 58.9kg, Articles: 50 1.08kg

151/2" x 141/4" x 175/8" 181/2" x 153/8" x 171/2" 19" x 19" x 185/8" 233/4" x 235/8" x 23" 27" x 20" x 201/2" 32" x 24" x 305/16" 33" x 21" x 27"

I, II and III II and III II and III I, II and III II and III II and III I, II and III

29 lbs. 60 lbs. 60 lbs. 58 lbs. 95 lbs. 95 lbs. 101 lbs.

1

$52.63 $65.88 $90.00 $155.53 $151.20 $283.25 $206.00

10

$48.05 $61.28 $87.30 $144.20 $135.00 $273.98 $183.34

25

$45.78 $58.56 $84.65 $137.51 $126.00 $261.62 $160.17

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

9


2013 UN Packaging Mini Spring WP 10-11 P 10-11_• 2/26/13 10:43 AM Page 10

B AT T E R Y B O X E S

PA C K A G I N G

Lithium Battery Boxes Use to ship articles and solids, such as lithium batteries and battery mechanical parts. Packaging must be used with Bubble Wrap® (sold separately). May be used to ship more than 1 article. • All modes of transport • See closure instructions for cushioning requirements • Sold individually Prices per each

Style

UA999BS UA1LIT1SM UAMLBAT1A UA121212BS UA151010BS UA151414BS Style UA121212BS

Style UA151010BS

Style UA151414BS

UN 4G/Y26.0/S

UN 4G/Y12.0/S

UN 4G/Y55.1/S

Style UA1LIT1SM

Style UA999BS

Style UAMLBAT1A

UN 4G/X6.1/S

UN 4G/Y11.0/S

UN 4G/Y5.6/S

Size (I.D.)

Weight

9"L x 9"W x 9"H 93/4"L x 45/8"W x 53/4"H 93/4"L x 5"W x 63/4"H 12"L x 12"W x 12"H 15"L x 10"W x 101/2"H 15"L x 14"W x 14"H

1

50

1.32 lbs. $4.76 1 lb. $2.42 1.1 lbs. $2.75 1.54 lbs. $7.74 1.39 lbs. $7.22 1.46 lbs. $10.67

$4.14 $2.11 $2.39 $6.73 $6.28 $9.27

Battery/Parts Boxes These packages have been tested for safe shipments of articles and solids, such as batteries contained in equipment, battery mechanical parts and other hazardous materials. Vermiculite and Bubble Wrap® sold separately. See closure instructions for cushioning requirements. • All modes of transport • Meet Procedure 1A requirements • See closure instructions for cushioning requirements • Sold individually

Components Included*

• UN marked fiberboard box • Liner bag • Tape • Tie

Prices per each

Style Style UA1DAB

Style UA1DABSM

Style UA1PAB

UN 4G/X11.1/S

UN 4G/X11.1/S

UN 4G/X11.1/S

Style UA1PABLG

Style UA1SCABM

UN 4G/X11.1/S

UN 4G/X24.0/S

Style UA1SCABLG UN 4G/Y41.3/S

UA1DABSM UA1DAB UA1PAB UA1PABLG UA1SCABM

Size (I.D.)

Weight

1

50

14"L x 11"W x 7"H 16"L x 10"W x 8"H 16"L x 111/4"W x 9"H 24"L x 12"W x 10"H 461/2"L x 12"W x 7"H

1.22 lbs. 1.27 lbs. 1.45 lbs. 1.57 lbs. 1.95 lbs.

$5.71 $6.06 $7.58 $8.69 $16.57

$4.94 $5.16 $6.47 $7.94 $15.47

Style

UA1SCABLG

Size (I.D.)

Weight

75

150

461/2"L x 24"W x 7"H

2.5 lbs.

$26.93

$25.55

*UA1SCABM and UA1SCABLG do not contain components.

Battery Boxes These packages have been tested to ship batteries and other solid hazardous materials, and you must use vermiculite or Bubble Wrap®, which are sold separately, for cushioning material. • Meet Procedure 1A requirements • See closure instructions for cushioning requirements • Sold individually

Components Included

• UN marked fiberboard box • Honeycomb insert • Liner bag • Tape

Prices per each

Style

UABB85R UABB105R UABB1513

10

Style UABB105R

Style UABB1513

Style UABB85R

UN 4G/X11.1/S

UN 4G/X30.8/S

UN 4G/X11.1/S

Call: 800-621-5808

Size (I.D.)

Weight

1

50

81/4"L x 51/2"W x 103/4"H 10"L x 51/2"W x 103/4"H 15"L x 13"W x 131/2"H

1 lb. 1.1 lbs. 1.65 lbs.

$8.49 $8.75 $9.08

$7.86 $7.98 $8.09

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 10-11 P 10-11_Standard 2/25/13 4:35 PM Page 11

B AT T E R Y B O X E S & PA C K A G I N G

PA C K A G I N G

Battery/SolidS BoxeS These UN-approved packages have been tested for safe shipments of air bag modules and solid hazardous materials. Place your module inside the plastic liner bag, fill void spaces with Bubble Wrap®, and you're ready to ship. • Packing Groups II and III • Meet Procedure 1A requirements • Sold individually except style UASB64UN, which has a minimum order of 75 boxes Prices per each

Size (O.D.)

Weight

1

50

30"L x 161/4"W x 11"H 381/2"L x 213/4"W x 81/2"H

2.05 lbs. 3.10 lbs.

$8.21 $11.91

$7.30 $10.58

Size (O.D.)

Weight

75

150

643/4"W x 20"W x 12"H

4.8 lbs.

$26.85

$24.17

Style

UASB29UN UASB38UN Style

UASB64UN

*Bubble Wrap® sold separately

®

*Bubble Wrap is a registered trademark of Sealed Air Corporation (US).

UASB29UN

UASB38UN

UASB64UN

UN 4G/Y16.6/S

UN 4G/Y16.6/S

UN 4G/Y16.6/S

FYI anti-static cushioning not included in package. 10 gal.

8 gal.

UN 1A2/X120/S

UN 1A2/X96/S Components Included

• Steel drum • Corrugated box

KLITDRM10

KLITDRM8

lithium Battery ShipperS This packaging may be used to ship prototype lithium batteries. Consult all applicable regulations, competent authority approvals or special permits. Anti-static Bubble Wrap® (sold separately) must be used as cushioning for the batteries. See closure instructions for cushioning requirements. Sold individually. Prices per each

Style

KLITDRM8 KLITDRM10

Capacity

Box Size (I.D.)

Drum Size

Weight

1

26

8 gal. 10 gal.

111/2"L x 51/2"W x 133/4"H 111/2"L x 51/2"W x 151/4"H

14" dia. x 16"H 14" dia. x 18.88"H

17.8 lbs. 20.2 lbs.

$81.30 $87.34

$73.91 $77.63

anti-Static BuBBle Wrap® cuShioning Nylon barrier-coated material is surrounded by specially treated anti-static polyethylene. Protects static-sensitive items from electrostatic charge. Bubble is up to 30% fuller and stronger than other brands. Contains a minimum of 15% recycled pre-consumer content. • Sturdy, 2-layer polyethylene • Perforated every 12"

• Sold in rolls or dispenser boxes

Prices per dispenser box

Style

Format

Bubble Size

KWRAP212ABA Dispenser Box KBUB6302AD Dispenser Box KBUB5302AD Dispenser Box

/ " 3/16" 3/16" 5 16

Size

Weight

1

3

12" x 100' 12" x 175' 12" x 175'

3.5 lbs. 3.5 lbs. 3.5 lbs.

$52.19 $48.73 $42.86

$47.57 $47.28 $41.58

Prices per roll

Style

KWBUB516ABA KBUB2322A KBUB2323A KBUB2324A KBUB2325A

Format

Bubble Size

Size

Weight

Rolls Rolls Rolls Rolls Rolls

5 16

/ " 3/16" 3/16" 3/16" 3/16"

24" x 375' 12" x 750' 16" x 750' 24" x 750' 48" x 750'

15 lbs. 8 lbs. 10.5 lbs. 14.5 lbs. 30 lbs.

1

$186.86 $120.90 $158.35 $220.93 $399.46

Bubble Wrap® is a registered trademark of Sealed Air Corporation (US).

3

$183.52 $117.30 $153.63 $214.34 $387.53

KWRAP212ABA

KWBUB516ABA

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

11


2013 UN Packaging Mini Spring-Base WP 12-13 P 12-13_Standard 2/22/13 2:45 PM Page 12

PA C K A G I N G

PERFORMANCE PLUS® F-STYLE CAN SHIPPERS

1 gal.

2 x 1 gal.

UN 4G/X6.6/S

UN 4G/Y31.6/S

Components Included

• F-style gallon metal can with 13/4" screw type closure • Self-dividing fiberboard box* • Liner bag • Tape 4 x 1 gal.

*1 x 1 gal. has a fiberboard insert vs. a self-dividing box.

UN 4G/Y31.6/S

6 x 1 gal. UN 4G/Y31.6/S

1-Gallon F-Style Can ShipperS

1-Quart F-Style Can Shippers available at labelmaster.com

If you order this package without a can, you must use a metal F-style can with a screw type closure of 13/4" or less to meet our test specifications for ground transport. If you use a can smaller than 1 gal., cushioning material must be added to fill void spaces.

• • • •

Assembled packages ship in 3-5 days Meets Procedure 1A requirements Cans pass hydrostatic pressure test to 95 kPa Sold individually

Prices per each

Style

# Inner Containers

UN1FGC1U UA1FGC1U UNIP1FGC1U UN2FGC2UA UA2FGC2UA UNIP2FGC2UA UN4FGC4 UA4FGC4 UNIP4FGC4 UN6FGC6 UA6FGC6 UNIP6FGC6

1 1 1 2 2 2 4 4 4 6 6 6

Size (O. D.)

Assembly

Packing Groups

Specific Gravity

Weight

1

50

71/8"L x 45/8"W x 131/4"H 71/8"L x 45/8"W x 131/4"H 71/8"L x 45/8"W x 131/4"H 75/8"L x 53/16"W x 141/4"H 75/8"L x 53/16"W x 141/4"H 75/8"L x 53/16"W x 141/4"H 147/16"L x 91/2"W x 111/2"H 147/16"L x 91/2"W x 111/2"H 147/16"L x 91/2"W x 111/2"H 143/8"L x 147/8"W x 111/4"H 143/8"L x 147/8"W x 111/4"H 143/8"L x 147/8"W x 111/4"H

Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Cans

I, II and III I, II and III I, II and III II and III II and III II and III II and III II and III II and III II and III II and III II and III

1.5 1.5 1.5 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

2.5 lbs. 2.5 lbs. 1.7 lbs. 4.1 lbs. 4.1 lbs. 2.4 lbs. 5.4 lbs. 5.4 lbs. 2.1 lbs. 8 lbs. 8 lbs. 3.2 lbs.

$12.33 $10.11 $3.97 $17.50 $14.13 $7.46 $30.43 $26.54 $8.77 $44.38 $37.45 $9.43

$10.57 $8.66 $3.73 $15.76 $12.63 $6.39 $28.57 $24.13 $8.25 $42.14 $34.29 $8.88

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

12

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 12-13 P 12-13_Standard 2/22/13 2:45 PM Page 13

C O M B I N AT I O N S H I P P E R S

• 4 32-oz. aluminum bottles with tamper-evident cap closure • UN marked fiberboard box • Fiberboard divider • Polyethylene plug • Tape

Components Included

• UN marked fiberboard box • Fiberboard divider • Tape 4 x 32 oz. UN 4G/X7.9/S

Aluminum Bottle ShipperS 4 x 25 oz.

6 x 25 oz.

12 x 25 oz.

UN 4G/Y11.2/S

UN 4G/Y11.2/S

UN 4G/Y11.2/S

Bottles may be reused in accordance with 49 CFR 173.28. Components required for reuse are listed below. If ordering the package without bottles, you must use a aluminum bottle with cap size of 42mm or smaller.

AeroSol ShipperS

• • • •

Unassembled packages ship up to 12 25-fl. oz. aerosol cans. • Packing Groups II and III • Meets Procedure 1A requirements • Sold individually

81/16"L x 81/16"W x 93/4"H Packing Groups I, II and III liquids Maximum specific gravity 1.5 Meets Procedure 1A requirement

Prices per each

Style

Description

UAERO425 4 x 25 oz. UAERO625 6 x 25 oz. UAERO1225 12 x 25 oz.

Size (I.D.)

• Hydrostatic pressure tested to 250 kPa • Sold individually

Prices per each

Weight

1

50

Style

61/4"L x 61/4"W x 105/16"H 1 lb. $6.18 $5.72 95/16"L x 61/4"W x 105/16"H 1.5 lbs. $7.57 $7.04 127/16"L x 97/16"W x 103/8"H 2 lbs. $7.93 $7.36

UN4AL32 UA4AL32 UNIP4AL32

Assembly

Weight

1

25

Assembled Unassembled Unassembled w/o Bottles

3 lbs. 3 lbs. 1 lb.

$67.22 $56.83 $10.02

$65.76 $51.12 $9.01

Aluminum BottleS & CApS Ideal for shipping small samples or small orders of liquid products, aluminum bottles have a strong tamper-evident closure. Featuring a 1-piece body construction, the 99.5% pure aluminum 1050A features white poly external thread. Poly caps have a tamper-evident, tear-off locking flange for added security. Poly plugs are constructed of LDPE with a pull-off tamper evident ring. Sold individually. Prices per each

Style

Description

KA12532 4-oz. (125cc) Aluminum Bottle KA27532 9-oz. (275cc) Aluminum Bottle KA62532 21-oz. (625cc) Aluminum Bottle KA110040 32-oz. (1,100cc) Aluminum Bottle KA125045 42-oz. (1,250cc) Aluminum Bottle KA250045 84-oz. (2,500cc) Aluminum Bottle K32CAP Cap for 4-, 9-, or 21-oz. Aluminum Bottles K40CAP Cap for 32-oz. Aluminum Bottles K45CAP Cap for 42- or 84-oz. Aluminum Bottles K24PLUG Plug for 4-, 9-, or 21-oz. Aluminum Bottles K28PLUG Plug for 32-, 42- or 84-oz. Aluminum Bottles

Weight

1

25

.15 lb. .18 lb. .20 lb. .22 lb. .40 lb. .50 lb. .02 lb. .04 lb. .05 lb. .04 lb. .06 lb.

$9.27 $10.10 $12.90 $8.12 $16.33 $41.90 $1.52 $1.27 $2.13 $0.25 $0.68

$7.76 $8.43 $10.77 $7.89 $13.60 $34.94 $1.26 $1.10 $1.67 $0.19 $0.63

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

13

PA C K A G I N G

Components Included


2013 UN Packaging Mini Spring-Base WP 14-15 P 14-15_Standard 2/22/13 2:47 PM Page 14

PA C K A G I N G

P E R F O R M A N C E P L U S ® PA I N T C A N S H I P P E R S

2 x 1 gal. UN 4G/X12.9/S

1 x 1 gal. UN 4G/X12.9/S

Components Included

• Paint can with lid and universal ring lock • UN marked fiberboard box • Fiberboard insert* • Liner bag • Tape *4 x 1 has self-dividing box vs. an insert

4 x 1 gal. UN 4G/Y25.2/S

1-Gallon Paint Can ShiPPerS—Fiberboard inSert* If you order this kit without a paint can, you must use a metal paint can with ring lock to meet testing specifications. • Can with ring lock passes hydrostatic • Assembled packages ship in 3-5 days pressure test to 95 kPa • Meets Procedure 1A requirements • Sold individually Prices per each

Style

UNC1G1R UAC1G1R UNIPC1G1R UNC1G2R UAC1G2R UNIPC1G2R UNC1G4A UAC1G4A UAC1G4V1A

# Inner Containers

Size (O.D.)

Assembly

Packing Groups

Specific Gravity

Weight

1

100

1 1 1 2 2 2 4 4 4

81/8"L x 81/8"W x 91/4"H 81/8"L x 81/8"W x 91/4"H 81/8"L x 81/8"W x 91/4"H 151/2"L x 81/8"W x 91/2"H 151/2"L x 81/8"W x 91/2"H 151/2"L x 81/8"W x 91/2"H 143/4"L x 143/4"W x 91/4"H 143/4"L x 143/4"W x 91/4"H 143/4"L x 143/4"W x 91/4"H

Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Cans

I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III II and III II and III II and III

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

2 lbs. 2 lbs. 1.3 lbs. 3.75 lbs. 3.75 lbs. 2.2 lbs. 5 lbs. 5 lbs. 3 lbs.

$9.73 $9.08 $5.95 $17.20 $14.48 $8.39 $25.92 $22.45 $8.82

$8.82 $8.12 $5.36 $15.53 $13.86 $7.52 $23.56 $20.41 $8.35

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

14

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 14-15 P 14-15_Standard 2/22/13 2:47 PM Page 15

P E R F O R M A N C E P L U S ® PA I N T C A N S H I P P E R S

1 x 1 qt. UN 4G/X3.3/S

4 x 1 qt. UN 4G/X10.1/S

6 x 1 qt. UN 4G/X10.1/S

1-Quart Paint Can ShiPPerS—Fiberboard inSert* If you order this kit without a paint can, you must use a metal paint can with ring lock to meet testing specifications. • Assembled packages ship in 3-5 days • Meets Procedure 1A requirements

• Can with ring lock passes hydrostatic pressure test to 95 kPa • Sold individually

Components Included

• Paint can with lid and universal ring lock • UN marked fiberboard box

• Fiberboard insert* • Liner bag • Tape

*4 x 1 & 6 x 1 have self-dividing box vs. an insert

Prices per each

Style

UN1QPC1U UA1QPC1U UNIP1QPC1U UN1QPC2U UA1QPC2U UNIP1QPC2U UN1QPC4U UA1QPC4U UNIP1QPC4U UN1QPC6 UA1QPC6 UNIP1QPC6

# Inner Containers

Size (O.D.)

Assembly

Packing Groups

Specific Gravity

Weight

1

100

1 1 1 2 2 2 4 4 4 6 6 6

6"L x 53/4"W x 67/8"H 6"L x 53/4"W x 67/8"H 6"L x 53/4"W x 67/8"H 111/2"L x 55/8"W x 61/2"H 111/2"L x 55/8"W x 61/2"H 111/2"L x 55/8"W x 61/2"H 105/8"L x 105/8"W x 63/4"H 105/8"L x 105/8"W x 63/4"H 105/8"L x 105/8"W x 63/4"H 141/2"L x 10"W x 61/2"H 141/2"L x 10"W x 61/2"H 141/2"L x 10"W x 61/2"H

Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Cans

I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III I, II and III

1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.5 1.5 1.5

.5 lb. .5 lb. .2 lb. 1.2 lbs. 1.2 lbs. .5 lb. 2.5 lbs. 2.5 lbs. 1.3 lbs. 6.5 lbs. 6.5 lbs. 3.5 lbs.

$8.32 $7.15 $4.65 $14.27 $9.80 $6.23 $18.63 $14.90 $8.12 $23.48 $21.30 $8.53

$7.43 $6.11 $4.19 $12.85 $8.83 $5.54 $16.94 $13.56 $7.31 $21.97 $18.93 $7.98

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

15

PA C K A G I N G

2 x 1 qt. UN 4G/X3.3/S


2013 UN Packaging Mini Spring-Base WP 16-17 P 16-17_Standard 2/22/13 3:58 PM Page 16

PA C K A G I N G

P E R F O R M A N C E P L U S ® PA I N T C A N S H I P P E R S

1 gal. UN 4G/Y29.1/S

2 x 1 gal.

4 x 1 gal.

UN 4G/Y29.1/S

UN 4G/Y29.1/S

Components Included

1-Gallon Paint Can ShiPPerS—Foam inSertS • • • •

Assembled packages ship in 3-5 days Packing Groups II and III liquids Maximum specific gravity 1.7 Meets procedure 1A requirements

• Cans with plastic ring lock pass the hydrostatic pressure test to 95 kPa • Sold individually

• • • • •

1-gal. paint can and ring lock UN marked fiberboard box Foam insert Liner bag Tape

Prices per each

Style

UN1PC1A UA1PC1A UNIP1PC1A UN2PC2A UA2PC2A UNIP2PC2A UN4PC4A UA4PC4A UNIP4PC4A

# Inner Containers

Size (O.D.)

Assembly

Weight

1

26

1 1 1 2 2 2 4 4 4

815/16"L x 8 16/16"W x 93/4"H 815/16"L x 8 16/16"W x 93/4"H 815/16"L x 8 16/16"W x 93/4"H 175/8"L x 91/16"W x 101/2"H 175/8"L x 91/16"W x 101/2"H 175/8"L x 91/16"W x 101/2"H 171/2"L x 171/2"W x 107/8"H 171/2"L x 171/2"W x 107/8"H 171/2"L x 171/2"W x 107/8"H

Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Can

2.2 lbs. 2.2 lbs. 1.4 lbs. 3.8 lbs. 3.8 lbs. 2.3 lbs. 7.5 lbs. 7.5 lbs. 4.6 lbs.

$11.91 $10.70 $5.86 $18.29 $16.63 $13.62 $34.89 $31.50 $14.86

$10.83 $9.72 $5.31 $16.63 $15.11 $12.38 $31.71 $28.64 $13.50

Components Included

• Paint can with welded side seam, lid and ring lock • UN marked fiberboard box • Polystyrene end caps • Liner bag • Tape

1 gal.

2 x 1 gal.

UN 4G/Y7.8/S

UN 4G/Y16.8/S

1-Gallon Paint Can ShiPPerS—SturdeeSeal™ • Packing Groups II and III liquids • Maximum specific gravity 1.6

• Ships fully assembled • Sold individually

Prices per each

Style

KTMP28UNR KMP28UN2R

# Inner Containers

Size (O.D.)

Assembly

Weight

1

100

1 2

101/8"L x 101/8"W x 121/2"H 181/4"L x 103/8"W x 121/2"H

Assembled Assembled

2 lbs. 4 lbs.

$13.50 $22.60

$12.68 $21.08

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

16

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 16-17 P 16-17_Standard 2/22/13 3:58 PM Page 17

P E R F O R M A N C E P L U S ® PA I N T C A N S H I P P E R S

PA C K A G I N G

1 qt. Components Included

UN 4G/X7.5/S

• • • • •

2 x 1 qt.

1-qt. paint can and ring lock UN marked fiberboard box Foam insert Liner bag Tape

UN 4G/X7.5/S

4 x 1 qt. UN 4G/X7.5/S

1-Quart Paint Can ShiPPerS—Foam inSertS • • • •

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Maximum specific gravity 1.7 Meets procedure 1A requirements

• Can with plastic ring lock passes the hydrostatic pressure test to 95 kPa • Sold individually

Prices per each

Style

# Inner Containers

Size (O. D.)

Assembly

Weight

1

100

1 1 1 2 2 2 4 4 4

61/2"L x 61/2"W x 81/4"H 61/2"L x 61/2"W x 81/4"H 61/2"L x 61/2"W x 81/4"H 129/16"L x 61/2"W x 81/4"H 129/16"L x 61/2"W x 81/4"H 129/16"L x 61/2"W x 81/4"H 129/16"L x 129/16"W x 81/4"H 129/16"L x 129/16"W x 81/4"H 129/16"L x 129/16"W x 81/4"H

Assembled Unassembled Unassembled w/o Can Assembled Unassembled Unassembled w/o Cans Assembled Unassembled Unassembled w/o Can

1.4 lbs. 1.4 lbs. 1 lb. 2.7 lbs. 2.7 lbs. 2.5 lbs. 3.2 lbs. 3.2 lbs. 2.7 lbs.

$8.97 $5.51 $5.25 $12.76 $10.46 $6.33 $23.40 $19.35 $10.91

$8.09 $4.90 $4.66 $11.48 $9.41 $5.64 $21.06 $17.41 $9.70

UN1QPC1FM UA1QPC1FM UNIP1QPC1FM UN2QPC2 UA2QPC2 UNIP2QPC2 UN4QPC4 UA4QPC4 UNIP4QPC4

1-Quart Paint Can ShiPPerS—XeBeC™ PouCh If you order this kit without a paint can, you must use a metal paint can with ring lock to meet testing specifications. Components Included • 91/4" x 73/4" x 141/4" • Specific gravity: 1.9 • Paint can with lid • Assembled packages ship in 3-5 days and universal ring lock • Meets Procedure 1A requirements • UN marked fiberboard box • Can passes hydrostatic pressure test to 95 kPa • XEBEC™ pouch • Can be used for Packing Groups I, II and III liquids • Tape • Sold individually

1 x 1 qt. UN 4G/X3.2/S

Prices per each

Style

UN32PCVBR UA32PCVBR UNIP32PCVBR

Assembly

Weight

1

26

Assembled Unassembled Unassembled w/o Can

3.25 lbs. 3.25 lbs. 3 lbs.

$23.48 $18.30 $17.25

$21.17 $16.47 $15.49

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

17


2013 UN Packaging Mini Spring-Base WP 18-19 P 18-19_Standard 2/25/13 8:55 AM Page 18

PA C K A G I N G

P E R F O R M A N C E P L U S ® PA I L S H I P P E R S

1 gal. UN 4G/X7.3/S 5 gal. UN 4G/X32.7/S

4 x 1 gal. UN 4G/X27.7/S Epoxy phenolic lining available

Steel Pail ShiPPerS—CloSed head If you order the 5-gal. shipper without a pail, you must use a 24-ga., closed head, steel pail with a maximum 2" bung. If you order the 1 x 1-gal. or 4 x 1-gal. shippers without a pail, you must use a 24-ga., closed head, steel pail with a maximum 2" bung. • • • • • • •

Assembled packages ship in 3-5 days Packing Groups I, II or III liquids Maximum specific gravity 1.5 for 1-gal. and 1.6 for 5-gal. 5-gal. steel pail passed a hydrostatic pressure test to 350 kPa 1-gal. steel pails passed a hydrostatic pressure test to 250 kPa Meets both UN and Procedure 1A testing requirements Sold individually

Components Included

• 24-ga., closed head steel pail with bung • UN marked fiberboard box

• • • •

Fiberboard pads Liner bag Tie Tape

Prices per each

Style

# Inner Container

UN1M UA1M UN1MEP UA1MEP UNIP1M UN4GM UA4GM UN4GMEP UA4GMEP UNIP4GM UA5MR UN5MR UN5MEPR UA5MEPR UNIP5MR

1 1 1 1 1 4 4 4 4 4 1 1 1 1 1

Capacity

Size (O.D.)

Lining

Assembly

Weight

1

26

1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal.

73/4"L x 73/4"W x 10"H 73/4"L x 73/4"W x 10"H 73/4"L x 73/4"W x 10"H 73/4"L x 73/4"W x 10"H 73/4"L x 73/4"W x 10"H 141/8"L x 141/8"W x 93/4"H 141/8"L x 141/8"W x 93/4"H 141/8"L x 141/8"W x 93/4"H 141/8"L x 141/8"W x 93/4"H 141/8"L x 141/8"W x 93/4"H 13"L x 13"W x 163/4"H 13"L x 13"W x 163/4"H 13"L x 13"W x 163/4"H 13"L x 13"W x 163/4"H 13"L x 13"W x 163/4"H

Rust Inhibitor Lining Rust Inhibitor Lining Epoxy Phenolic Lining Epoxy Phenolic Lining Rust Inhibitor Lining Rust Inhibitor Lining Epoxy Phenolic Lining Epoxy Phenolic Lining Rust Inhibitor Lining Rust Inhibitor Lining Epoxy Phenolic Lining Epoxy Phenolic Lining -

Assembled Unassembled Assembled Unassembled Unassembled w/o Pail Assembled Unassembled Assembled Unassembled Unassembled w/o Pails Unassembled Assembled Assembled Unassembled Unassembled w/o Pail

2.6 lbs. 2.6 lbs. 2.6 lbs. 2.6 lbs. 1.2 lbs. 7.5 lbs. 7.5 lbs. 7.5 lbs. 7.5 lbs. 2 lbs. 7 lbs. 7 lbs. 7 lbs. 7 lbs. 2.5 lbs.

$37.01 $33.58 $38.95 $35.36 $7.60 $136.01 $113.13 $143.76 $119.58 $11.88 $33.21 $41.47 $43.70 $34.95 $8.20

$33.94 $30.52 $35.71 $32.14 $6.59 $124.69 $103.70 $131.78 $109.61 $11.23 $29.86 $37.35 $39.33 $31.46 $7.54

overPaCk BoxeS Use these overpack boxes for convenient stacking of UN marked pails. These overpack boxes may be used with 1- or 5-gal., plastic or steel pails. These can be used to stack otherwise unstable pails on pallets for safe shipping. • • • •

275-lb., double wall boxes 2 pads included with all boxes Pads available individually Sold individually Prices per each

Style

Pails not included

18

Call: 800-621-5808

KB1000M KB1200M KB5000M KD1000RU KD50THR

Capacity

Size (O.D.)

Weight

1

1 gal. 1 gal. 5 gal. -

81/4"L x 81/4"W x 107/8"H 85/8"L x 85/8"W x 115/16"H 131/8"L x 131/8"W x 161/2"H Extra Pad for KB1000M Extra Pad for KB5000M

1.34 lbs. 1.42 lbs. 1.63 lbs. .25 lb. .10 lb.

$2.56 $2.81 $4.94 $0.82 $0.66

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 18-19 P 18-19_Standard 2/25/13 8:55 AM Page 19

P E R F O R M A N C E P L U S ® PA I L S H I P P E R S

PA C K A G I N G

GASoline CombinAtion ShiPPerS • • • •

Packing Groups I, II and III liquids Maximum specific gravity 2.0 Sold individually Meets DOT, ICAO, IMO 49 CFR test requirements 1 gal.

Components Included

UN 4G/X9.7/S

• 1-gallon, 24-gauge steel pail with 2" bung • UN marked 4G fiberboard box

• Poly bag • Tape

Prices per each

Style

KTMGASUN KTMGUNEP

Capacity

Size (O.D.)

Lining

Weight

1

61

176

1 gal. 1 gal.

117/8"L x 117/8"W x 141/4"H 117/8"L x 117/8"W x 141/4"H

Rust Inhibitor Epoxy Phenolic

2.5 lbs. 2.5 lbs.

$30.74 $35.71

$28.78 $33.46

$27.15 $0.00

Steel PAil ShiPPerS—oPen heAd If you order this package without a pail, you must use a 26-ga., open head, steel pail. • • • • • •

Assembled packaging ships in 3-5 days Packing Groups II or III liquids and Packing Groups I, II, and III solids Maximum specific gravity 1.7 Passed a hydrostatic pressure test to 100 kPa Meets both UN and Procedure 1A testing requirements Sold individually Components Included

• 5-gal., 24-ga., open head steel pail with rust inhibitor lining • UN marked fiberboard box • Fiberboard pads

• Liner bag • Tie • Tape

5 gal. UN 4G/Y35.4/S (liquids) UN 4G/X32.7/S (solids)

Prices per each

Style

# Inner Containers Capacity

UN51A2R UA51A2 UNIP5MR

1 1 1

5 gal. 5 gal. 5 gal.

Size (O.D.)

Assembly

Weight

13"W x 13"D x 163/4"H 13"W x 13"D x 163/4"H 13"L x 13"W x 163/4"H

Unassembled Unassembled Unassembled w/o Pail

7.5 lbs. 7.5 lbs. 2.5 lbs.

1

26

$36.07 $34.00 $28.83 $25.88 $8.20 $7.54

Poly PAil ShiPPerS—CloSed heAd

NEW LOWER PRICING!

If you order this package without a pail, you must use a 5- or 6-gal., closed head polyethylene pail with a maximum 70mm cap. • • • •

5 gal.

Packing Groups I, II or III liquids Maximum specific gravity 1.9 Assembled packages ship in 3 to 5 days Sold individually

UN 4G/X49.2/S

6 gal. UN 4G/X49.2/S

Components Included

• Fiberboard pads and box • Liner bag

• Tie • Closure tape

Prices per each

Style

UN51H1R UA51H1R UN61H1R UA61H1R UNIP61H1R

Capacity

Size (O.D.)

Assembly

Weight

1

26

5 gal. 5 gal. 6 gal. 6 gal. -

123/4"L x 125/8"W x 19"H 123/4"L x 125/8"W x 19"H 123/4"L x 125/8"W x 19"H 123/4"L x 125/8"W x 19"H 123/4"L x 125/8"W x 19"H

Assembled Unassembled Assembled Unassembled Unassembled w/o Pail

5.5 lbs. 5.5 lbs. 6.6 lbs. 6.6 lbs. 2.3 lbs.

$26.58 $23.15 $33.27 $30.33 $5.62

$23.96 $20.53 $29.97 $26.98 $4.88

Call: 800-621-5808

Fax: 800-723-4327

Square Poly Pail Shippers Available at labelmaster.com

Order: labelmaster.com

19


2013 UN Packaging Mini Spring WP 20-21 P 20-21_• 2/26/13 1:41 PM Page 20

PA C K A G I N G

PERFORMANCE PLUS® GLASS SHIPPERS

4 oz.

8 oz.

UN 4G/X1.5/S

UN 4G/X1.5/S

16 oz.

32 oz.

6 x 32 oz.

UN 4G/X1.5/S

UN 4G/X2.4/S

UN 4G/X12.6/S

Flint bottles available.

Glass shippers—Narrow Mouth, FoaM iNsert

• Packing Group I, II and III • Meets requirements of Procedure 1A • Sold individually

If you order a package without a bottle, you must use a boston round glass bottle with screw-type cap. • To order Polyseal® phenolic caps, specify APS (amber bottle with Polyseal® phenolic cap with polyethylene cone liner) or FPS (flint bottle with Polyseal® phenolic cap) in ( ) after style number • To order Teflon® phenolic caps, specify APT (amber bottle with Teflon® phenolic cap) or FPT (flint bottle with Teflon® phenolic cap) in ( ) after style number • Assembled packages ship in 3-5 days

Components Included

• PVC-coated, narrow mouth bottle • Phenolic cap • UN marked fiberboard box

• Foam inserts • Liner bag • Tape

Prices per each

Style

# Inner-Containers

UN4F( ) UA4F( ) UNIP4F UN8F( ) UA8F( ) UNIP8F UN16F( ) UA16F( ) UNIP16F UN32F( ) UA32F( ) UNIP32F UN61LFAPT UA61LFAPT UNIP61LF

1 1 1 1 1 1 1 1 1 1 1 1 6 6 6

Capacity

Size (O. D.)

Cap Size

Assembly

4 oz. 4 oz. 4 oz. 8 oz. 8 oz. 8 oz. 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz.

6"L x 6"W x 105/8"H 6"L x 6"W x 105/8"H 6"L x 6"W x 105/8"H 6"L x 6"W x 105/8"H 6"L x 6"W x 105/8"H 6"L x 6"W x 105/8"H 6"L x 6"W x 101/2"H 6"L x 6"W x 101/2"H 6"L x 6"W x 101/2"H 61/8"L x 6"W x 113/4"H 61/8"L x 6"W x 113/4"H 61/8"L x 6"W x 113/4"H 14"L x 10"W x 113/8"H 14"L x 10"W x 113/8"H 14"L x 10"W x 113/8"H

22mm 22mm

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles

24mm 24mm 28mm 28mm 33mm 33mm 33mm 33mm

Specific Gravity

2 2 2 2 2 2 2 2 2 1.7 1.7 1.7 1.5 1.5 1.5

Weight

1

26

.77 lb. .77 lb. .55 lb. .90 lb. .90 lb. .60 lb. 1.17 lbs. 1.17 lbs. .65 lb. 1.8 lbs. 1.8 lbs. .80 lb. 9.1 lbs. 9.1 lbs. 1.5 lbs.

$13.00 $10.38 $7.59 $13.47 $10.83 $8.89 $13.98 $11.18 $10.33 $17.49 $14.64 $12.41 $63.40 $57.09 $14.26

$11.69 $9.32 $6.82 $12.12 $9.76 $8.17 $12.55 $10.05 $9.03 $16.72 $13.02 $11.09 $60.38 $54.35 $13.57

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

20

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 20-21 P 20-21_Standard 2/25/13 4:43 PM Page 21

PERFORMANCE PLUS® GLASS SHIPPERS

PA C K A G I N G

Glass shippers—wide Mouth, VerMiculite pouch If you order a package without a bottle, you must use a Wide Mouth Packer glass bottle with screw-type cap that may not exceed 53mm. • • • • •

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Maximum specific gravity 2.8 Meets Procedure 1A requirements Sold individually

625ml UN 4G/X4.4/S 950ml UN 4G/X4.4/S

Prices per each

Style

UN625GPT UA625GPT UNIP625GPT UN950GPT UA950GPT UNIP950GPT

Components Included

Capacity

Size (O.D.)

Assembly

Weight

1

26

625ml 625ml 625ml 950ml 950ml 950ml

73/4"L x 73/4"W x 113/4"H 73/4"L x 73/4"W x 113/4"H 73/4"L x 73/4"W x 113/4"H 81/2"L x 81/2"W x 13"H 81/2"L x 81/2"W x 13"H 81/2"L x 81/2"W x 13"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle

2.6 lbs. 2.6 lbs. 2.05 lbs. 3.7 lbs. 3.7 lbs. 3 lbs.

$18.21 $15.06 $10.68 $22.81 $16.42 $14.21

$16.35 $13.57 $9.62 $20.58 $14.92 $12.77

2.5L

4L

4 x 2.5L UN 4G/Y22.8/S (liquids) UN 4G/X17.6/S (solids)

UN 4G/X5.8/S

UN 4G/X9.2/S

Glass JuG shippers—Narrow Mouth, FoaM iNsert If you order a package without a bottle, you must use a glass jug with screw-type cap of 38mm or smaller. 4 x 4L packaging is available. Call for information.

• • • •

• PVC-coated, amber glass bottle with 53mm phenolic cap and Teflon® liner • UN marked fiberboard box • XEBEC™ vermiculite pouch • Liner bag • Tape

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Meets requirements of Procedure 1A Sold individually

Components Included

• Non-PVC-coated bottle • Phenolic cap with Teflon® liner • UN marked fiberboard box

• Foam insert • Liner bag • Tape

Prices per each

Style

UN25LFAPT UA25LFAPT UNIP25LF UN425LFAPT UA425LFAPT UNIP425LF UN4LFAPT UA4LFAPT UNIP4LF

# Inner Containers

Capacity

Size (O.D.)

Assembly

Specific Gravity

Weight

1

26

1 1 1 4 4 4 1 1 1

2.5L 2.5L 2.5L 2.5L 2.5L 2.5L 4L 4L 4L

73/4"L x 73/4"W x 16"H 73/4"L x 73/4"W x 16"H 73/4"L x 73/4"W x 16"H 141/8"L x 141/8"W x 161/4"H 141/8"L x 141/8"W x 161/4"H 141/8"L x 141/8"W x 161/4"H 101/4"L x 103/8"W x 175/8"H 101/4"L x 103/8"W x 175/8"H 101/4"L x 103/8"W x 175/8"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles Assembled Unassembled Unassembled w/o Bottle

1.7 1.7 1.7 1.2 1.2 1.2 1.7 1.7 1.7

2.9 lbs. 2.9 lbs. 1 lb. 11.7 lbs. 11.7 lbs. 2.7 lbs. 4.8 lbs. 4.8 lbs. 1.8 lbs.

$24.47 $22.30 $12.48 $84.62 $78.53 $16.20 $29.83 $26.82 $14.71

$22.73 $20.01 $10.33 $78.90 $71.73 $13.47 $26.69 $23.96 $12.48

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

21


2013 UN Packaging Mini Spring-Base WP 22-23 P 22-23_Standard 2/25/13 4:47 PM Page 22

PA C K A G I N G

PERFORMANCE PLUS® GLASS SHIPPERS

16 oz. UN 4G/X9.4/S

32 oz. UN 4G/X9.4/S

8 oz.

4 x 32 oz

UN 4G/X9.4/S

UN 4G/X9.4/S

Glass shippers—Wide Mouth, FoaM insert If you order a package without a bottle, you must use a glass jar with screw-type cap. Cap size may not exceed 70mm. • • • • •

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Maximum specific gravity 1.8 Meets Procedure 1A requirements Sold individually

Components Included

• • • • • •

PVC-coated wide mouth glass bottle 70mm cap UN marked fiberboard box Foam cushioning Liner bag Tape

Prices per each

Style

UNHWS8 UAHWS8 UNIPHWS8 UNHWS16 UAHWS16 UNIPHWS16 UNHWS321 UAHWS321 UNIPHWS321 UNHWS324 UAHWS324 UNIPHWS324

# Inner Containers

Capacity

Size (O.D.)

Assembly

Weight

1

26

1 1 1 1 1 1 1 1 1 4 4 4

8 oz. 8 oz. 8 oz. 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz.

61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 61/4"L x 61/4"W x 103/4"H 121/8"L x 121/8"W x 103/4"H 121/8"L x 121/8"W x 103/4"H 121/8"L x 121/8"W x 103/4"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles

1.1 lbs. 1.1 lbs. .75 lb. 1.3 lbs. 1.3 lbs. .70 lb. 1.46 lbs. 1.46 lbs. .70 lb. 6 lbs. 6 lbs. 2.9 lbs.

$16.48 $13.19 $6.46 $16.85 $13.47 $6.59 $19.72 $15.78 $6.75 $52.57 $41.96 $19.50

$14.84 $11.84 $5.89 $15.21 $12.12 $5.94 $17.78 $14.21 $6.09 $47.26 $37.72 $17.49

4 oz. Narrow Mouth UN 4G/X1.9/S 8 oz. Wide Mouth 8 oz. Narrow Mouth UN 4G/Y3.0/S UN 4G/Y3.0/S 32 oz Wide Mouth 16 oz. Narrow Mouth

UN 4G/Y11.1/S

UN 4G/Y5.9/S 32 oz. Narrow Mouth UN 4G/Y11.1/S

Glass shippers—sturdeeseal™ • • • •

Packing Groups II and III Meets Procedure 1A requirements Glass bottles passed hydrostatic pressure test to 95 kPa Sold individually

Components Included

• • • •

• Liner bags • Polypropylene absorbent pad • Tape

4 amber glass bottles Teflon®-lined caps UN marked fiberboard box Foam packing

Prices per each

Style

HMS-44N HMS-88N HMS-88W HMS-16N HMS-32N HMS-32W

Capacity

Cap Size

Size (O.D.)

Assembly

Specific Gravity

Weight

1

12

25

4 oz. 8 oz. 8 oz. 16 oz. 32 oz. 32 oz.

22mm 24mm 45mm 28mm 33mm 53mm

71/4"L x 71/4"W x 73/4"H 83/4"L x 83/4"W x 81/2"H 83/4"L x 83/4"W x 81/2"H 93/8"L x 91/2"W x 101/4"H 103/4"L x 103/4"W x 121/4"H 103/4"L x 103/4"W x 121/4"H

Assembled Assembled Assembled Assembled Assembled Assembled

1.2 2 1.6 1.6 2 1.6

1.9 lbs. 2.77 lbs. 2.77 lbs. 4.1 lbs. 6.17 lbs. 6.17 lbs.

$17.78 $20.49 $25.24 $28.06 $34.77 $40.84

$16.58 $19.44 $24.10 $26.69 $33.06 $38.85

$16.01 $18.36 $22.79 $25.17 $31.34 $36.62

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

22

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 22-23 P 22-23_Standard 2/25/13 4:47 PM Page 23

PERFORMANCE PLUS® GLASS SHIPPERS 4 oz. UN 4G/X2.8/S

If you order a package without a bottle, you must use a boston round glass bottle with screw-type cap. Cap size may not exceed 33mm. To order, specify APC (amber bottle) or FPC (flint bottle) in ( ) after style number. • • • • •

8 oz. UN 4G/X2.8/S

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Maximum specific gravity 1.4 Meets Procedure 1A requirements Sold individually Components Included

• • • • •

• PVC-coated narrow mouth glass bottle • Polyseal® phenolic cap with polyethylene cone liner • UN marked fiberboard box

Pads Absorbent pouch Fiberboard insert Liner bag Tape

16 oz. UN 4G/X2.8/S 32 oz. Flint bottles available

UN 4G/X2.8/S

Prices per each

Style ( )

UN4A( ) UA4A( ) UNIP4A UN8A( ) UA8A( ) UNIP8A UN16A( ) UA16A( ) UNIP16A UN32A( ) UA32A( ) UNIP32A

Capacity

Cap Size

Size (O.D.)

Assembly

Weight

1

26

4 oz. 4 oz. 4 oz. 8 oz. 8 oz. 8 oz. 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz.

22mm 22mm 24mm 24mm 28mm 28mm 33mm 33mm -

67/8"L x 67/8"W x 91/2"H 67/8"L x 67/8"W x 91/2"H 67/8"L x 67/8"W x 91/2"H 67/8"L x 67/8"W x 91/2"H 67/8"L x 67/8"W x 91/2"H 67/8"L x 67/8"W x 91/2"H 91/4"L x 91/4"W x 121/4"H 91/4"Lx 91/4"W x 121/4"H 91/4"L x 91/4"W x 121/4"H 91/4"L x 91/4"W x 121/4"H 91/4"L x 91/4"W x 121/4"H 91/4"L x 91/4"W x 121/4"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle

1.1 lbs. 1.1 lbs. 5 lb. 1.3 lbs. 1.3 lbs. .5 lb. 1.7 lbs. 1.7 lbs. .5 lb. 2.9 lbs. 2.9 lbs. 1 lb.

$11.04 $9.59 $7.26 $13.42 $9.65 $8.40 $16.05 $13.99 $9.72 $19.68 $17.17 $10.73

$10.12 $8.72 $6.58 $12.48 $8.77 $7.73 $14.71 $12.72 $8.93 $18.03 $15.60 $9.85

Glass shippers—Fiberboard iNsert If ordering package without bottles, you must use glass bottles with screw-type cap. Cap size may not exceed 70mm. 70mm shippers include flint bottles with Teflon® liner caps. 33mm shippers offer a choice of bottle and liner options. To order 33mm shippers, specify APSU (amber bottles w/Polyseal® cone liner caps), APTU (amber bottles w/Teflon® liner caps) or FPTR (flint bottles w/Teflon® liner caps) in ( ) after style number. • • • • •

Assembled packages ship in 3-5 days Packing Groups I, II or III liquids Maximum specific gravity 1.5 Meets Procedure 1A requirements Sold individually Components Included

• Fiberboard box size (O.D.): 201/4" x 127/8" x 13" • 6 32-oz. PVC-coated glass bottles with Polyseal® or Teflon® caps

• Fiberboard inserts and pads • Liner bags • Tape 6 x 32 oz UN 4G/X13.8/S

Flint bottles available

Prices per each

Style

UN326( ) UA326( ) UN326VCU UA326VCU UNIP326CU

Cap Size

Assembly

33mm Assembled 33mm Unassembled 70mm Assembled 70mm Unassembled Unassembled w/o Bottles

Call: 800-621-5808

Weight

1

26

13 lbs. 13 lbs. 13 lbs. 13 lbs. 2.5 lbs.

$73.55 $67.36 $73.55 $67.36 $37.85

$65.39 $59.86 $65.39 $59.85 $34.40

Fax: 800-723-4327

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Order: labelmaster.com

23

PA C K A G I N G

Glass shippers—Narrow Mouth, Fiberboard iNsert


2013 UN Packaging Mini Spring-Base WP 24-25 P 24-25_Standard 2/25/13 4:51 PM Page 24

PA C K A G I N G

P E R F O R M A N C E P L U S ® P O LY S H I P P E R S

4 oz.

4 x 4 oz.

UN 4G/X9.3/S

UN 4G/X9.3/S

8 oz.

4 x 8 oz.

UN 4G/X9.3/S

UN 4G/X9.3/S

16 oz.

4 x 16 oz.

UN 4G/X9.3/S

UN 4G/X9.3/S

32 oz.

4 x 32 oz.

UN 4G/X9.3/S

UN 4G/X9.3/S

Poly (NalgeNe®) ShiPPerS—Foam iNSert If you order a package without a bottle, you must use a Nalgene® poly bottle with screw cap. Cap size may not exceed sizes listed below. To order, specify W (wide mouth bottle) or N (narrow mouth bottle) in ( ) after style number. • • • • • •

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids Maximum specific gravity 2.0 Meets Procedure 1A requirements Bottles pass hydrostatic pressure test to 95 kPa Sold individually

Components Included

• • • • • •

Nalgene® HDPE IP2 bottles Polypropylene caps UN marked fiberboard box Foam insert Liner bags Tape

Prices per each

Style

UN4NPS-( ) UA4NPS-( ) UNIP4NPS UN44NPS-( ) UA44NPS-( ) UNIP44NPS UN8NPS-( ) UA8NPS-( ) UNIP8NPS UN84NPS-( ) UA84NPS-( ) UNIP84NPS UN16NPS-( ) UA16NPS-( ) UNIP16NPS UN164NPS-( ) UA164NPS-( ) UNIP164NPS UN32NPS-( ) UA32NPS-( ) UNIP32NPS UN324NPS-( ) UA324NPS-( ) UNIP324NPS

# Inner Containers

Capacity

Cap Size

Size (O.D.)

Assembly

Weight

1

26

1 1 1 4 4 4 1 1 1 4 4 4 1 1 1 4 4 4 1 1 1 4 4 4

4 oz. 4 oz. 4 oz. 4 oz. 4 oz. 4 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 16 oz. 16 oz. 16 oz. 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz. 32 oz.

24mm, 38mm 24mm, 38mm

61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 61/4"L x 61/4"W x 97/8"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 1113/16"L x 1113/16"W x 10"H 67/16"L x 67/16"W x 115/8"H 67/16"L x 67/16"W x 115/8"H 67/16"L x 67/16"W x 115/8"H 121/8"L x 121/8"W x 113/4"H 121/8"L x 121/8"W x 113/4"H 121/8"L x 121/8"W x 113/4"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles

.5 lb. .5 lb. .25 lb. 1.75 lbs. 1.75 lbs. 1.5 lbs. .75 lb. .75 lb. .5 lb. 2 lbs. 2 lbs. 1.5 lbs. .75 lb. .75 lb. .5 lb. 2.33 lbs. 2.33 lbs. 1.75 lbs. 1 lb. 1 lb. .5 lb. 3 lbs. 3 lbs. 2.25 lbs.

$5.29 $5.09 $4.89 $14.42 $11.92 $7.96 $6.82 $5.46 $5.24 $20.80 $17.21 $8.96 $8.53 $6.95 $5.82 $26.90 $22.30 $9.82 $11.69 $9.53 $6.89 $41.80 $34.71 $11.40

$4.96 $4.60 $4.53 $13.19 $10.91 $6.59 $6.17 $5.02 $4.73 $19.01 $15.78 $7.02 $7.82 $6.38 $4.89 $24.59 $20.37 $8.25 $10.68 $8.75 $5.89 $38.22 $31.77 $10.10

24mm, 38mm 24mm, 38mm 24mm, 43mm 24mm, 43mm 24mm, 43mm 24mm, 43mm 28mm, 53mm 28mm, 53mm 28mm, 53mm 28mm, 53mm 38mm, 63mm 38mm, 63mm 38mm, 63mm 38mm, 63mm

Nalgene® torque Wrench available on page 28.

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

24

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 24-25 P 24-25_Standard 2/25/13 4:51 PM Page 25

P E R F O R M A N C E P L U S ® P O LY S H I P P E R S

PA C K A G I N G

Poly ShiPPerS—Foam inSert If you order a package without a bottle, you must use a square polyethylene bottle with screw cap. Cap size may not exceed 38mm. • • • • •

Assembled packages ship in 3-5 days Packing Groups II or III liquids Maximum specific gravity 1.7 Meets Procedure 1A requirements Sold individually Components Included

• • • •

• Polyethylene bottle • 38mm Polyseal® phenolic cap with polyetheylene cone liner

UN marked fiberboard box Foam insert Liner bag Tape

1 gal. UN 4G/Y7.1/S

Prices per each

Style

Capacity

Size (O.D.)

Assembly

Weight

UN128PPS 1 gal. 87/8"L x 85/8"W x 153/4"H Assembled 1.75 lbs. Unassembled 1.75 lbs. UA128PPS 1 gal. 87/8"L x 85/8"W x 153/4"H UNIP128PPS 1 gal. 87/8"L x 85/8"W x 153/4"H Unassembled w/o Bottle 1.5 lbs.

1

26

$16.78 $14.13 $12.04

$15.91 $12.68 $10.91

1 gal.

2 x 1 gal.

4 x 1 gal.

UN 4G/X25.4/S

UN 4G/X25.4/S

UN 4G/X25.4/S

Poly ShiPPerS—heavy-Duty FiberboarD inSert If you order a package without a bottle, you must use a round polyethylene bottle with screw cap. Cap size may not exceed 38mm. • Assembled packages ship in 3-5 days • Packing Groups I, II and III liquids

• Maximum specific gravity 1.5 • Meets Procedure 1A requirements

• Sold individually

Prices per each

Style

# Inner Containers Capacity

UNC128RPS UAC128RPS UNIPC128RPS UNC2128RPS UAC2128RPS UNIPC2128RPS UNC4128RPS UAC4128RPS UNIPC4128RPS

1 1 1 2 2 2 4 4 4

1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal. 1 gal.

Components Included

Size (O.D.)

Assembly

Weight

1

26

67/8"L x 65/8"W x 151/2"H 67/8"L x 65/8"W x 151/2"H 67/8"L x 65/8"W x 151/2"H 135/16"L x 7"W x 161/4"H 135/16"L x 7"W x 161/4"H 135/16"L x 7"W x 161/4"H 133/4"L x 131/2"W x 167/8"H 133/4"L x 131/2"W x 167/8"H 133/4"L x 131/2"W x 167/8"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottles Assembled Unassembled Unassembled w/o Bottles

2 lbs. 2 lbs. 1.5 lbs. 3 lbs. 3 lbs. 2.4 lbs. 5.1 lbs. 5.1 lbs. 4 lbs.

$14.80 $11.62 $8.84 $24.69 $21.63 $14.34 $34.22 $31.31 $19.83

$13.37 $10.16 $7.94 $22.27 $18.92 $12.52 $30.75 $27.83 $18.51

• Polyethylene bottle • 38mm Polyseal® phenolic cap with polyethylene cone liner • UN marked fiberboard box • Fiberboard insert • Liner bag • Tape

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

25


2013 UN Packaging Mini Spring-Base WP 26-27 P 26-27_Standard 2/26/13 1:18 PM Page 26

PA C K A G I N G

P E R F O R M A N C E P L U S ® P O LY S H I P P E R S

625cc UN 4G/X2.1/S

950cc

16 oz.

UN 4G/X2.1/S

UN 4G/X2.0/S

32 oz

1 gal.

UN 4G/X2.0/S

UN 4G/X6.4/S

Poly ShiPPerS—Fiberboard inSert

Components Included

If you order a package without a bottle, you must use a poly bottle with a screw cap. Cap size may not exceed sizes listed below.

• Polyethylene bottle • Cap • UN marked fiberboard box

• Assembled packages ship in 3-5 days • Packing Groups I, II and III liquids • Sold individually

• • • •

Fiberboard insert Liner bag Nylon tie Tape

Prices per each

Style

UN625PPT UA625PPT UNIP625PPT UN950PPT UA950PPT UNIP950PPT UN16PPSR UA16PPSR UNIP16PPSR UN32PPSR UA32PPSR UNIP32PPSR UNC128PS UAC128PS UNIPC128PS

Capacity

Cap Size

Size (O.D.)

Assembly

Weight

1

26

625cc 625cc 625cc 950cc 950cc 950cc 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz. 1 gal. 1 gal. 1 gal.

53mm 53mm

63/4"L x 63/4"W x 115/8"H 63/4"L x 63/4"W x 115/8"H 63/4"L x 63/4"W x 115/8"H 61/4"L x 61/8"W x 101/2"H 61/4"L x 61/8"W x 101/2"H 61/4"L x 61/8"W x 101/2"H 61/4"L x 61/4"W x 105/8"H 61/4"L x 61/4"W x 105/8"H 61/4"L x 61/4"W x 105/8"H 63/4"L x 63/4"W x 115/8"H 63/4"L x 63/4"W x 115/8"H 63/4"L x 63/4"W x 115/8"H 9"L x 9"W x 161/4"H 9"L x 9"W x 161/4"H 9"L x 9"W x 161/4"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle

.77 lb. .77 lb. .65 lb. .77 lb. .77 lb. .60 lb. .68 lb. .68 lb. .55 lb. .87 lb. .87 lb. .65 lb. 2.8 lbs. 2.8 lbs. 2.5 lbs.

$10.72 $8.56 $5.64 $10.99 $8.77 $5.79 $10.08 $8.97 $7.17 $11.28 $9.01 $7.05 $14.47 $11.62 $10.29

$9.61 $7.73 $5.08 $9.88 $7.86 $5.23 $9.61 $8.14 $6.55 $10.13 $8.15 $6.34 $13.08 $10.44 $9.25

53mm 53mm 28mm 28mm 38mm 38mm 38mm 38mm

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

26

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 26-27 P 26-27_Standard 2/26/13 1:18 PM Page 27

P E R F O R M A N C E P L U S ® P O LY S H I P P E R S

PA C K A G I N G

625cc UN 4G/X2.0/S 950cc UN 4G/X2.0/S

16 oz. UN 4G/X2.0/S 32 oz. UN 4G/X2.0/S

Poly ShiPPerS—w/AbSorbent

Components Included

If you order a package without a bottle, you must use an HDPE bottle with a polyethylene cap with a cone liner. Cap size may not exceed sizes listed below. • • • •

• Polyethylene bottle • Cap • UN marked fiberboard box

Assembled packages ship in 3-5 days Packing Groups I, II and III liquids (mode dependent) Maximum specific gravity 1.5 Sold individually

• Absorbent-lined bag • Nylon tie • Tape

Prices per each

Style

UN625APPTR UA625APPTR UNIP625APR UN950APPTR UA950APPTR UNIP950APR UN16APPSR UA16APPSR UNIP16APR UN32APPSRU UA32APPSR UNIP32APR

Capacity

Cap Size

Size (O.D.)

Assembly

Weight

1

26

625cc 625cc 625cc 950cc 950cc 950cc 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz.

53mm 53mm

91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 155/8"H 91/4"L x 81/2"W x 155/8"H 91/4"L x 81/2"W x 155/8"H 91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 125/8"H 91/4"L x 81/2"W x 155/8"H 91/4"L x 81/2"W x 155/8"H 91/4"L x 81/2"W x 155/8"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle

1.24 lbs. 1.24 lbs. 1.0 lb. 1.29 lbs. 1.29 lbs. 1.0 lbs. 1.0 lb. 1.0 lb. 0.8 lb. 1.14 lbs. 1.14 lbs. 0.9 lb.

$14.13 $11.55 $8.61 $16.88 $13.84 $8.61 $12.18 $9.92 $8.61 $12.18 $9.92 $8.61

$12.85 $10.50 $7.82 $15.34 $12.58 $7.82 $11.07 $9.02 $7.82 $11.07 $9.02 $7.82

53mm 53mm 28mm 28mm 38mm 38mm

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

27


2013 UN Packaging Mini Spring-Base WP 28-29 P 28-29_Standard 2/25/13 8:57 AM Page 28

P E R F O R M A N C E P L U S ® P O LY S H I P P E R S

PA C K A G I N G

Components Included

• Nalgene® polyethylene bottle • Cap • UN marked fiberboard box • XEBEC™ pouch • Tape

8 oz.

16 oz.

32 oz.

UN 4G/X3.2/S

UN 4G/X3.2/S

UN 4G/X3.2/S

Poly ShiPPerS—Vermiculite Pouch • • • •

If ordering a package without a bottle, you must use a polyethylene bottle with a screw cap, not to exceed cap size of 63mm. • Assembled packages ship in 3-5 days • Packing Groups I, II or III liquids

Maximum specific gravity 1.7 Meets Procedure 1A requirements Bottles pass hydrostatic pressure test to 95 kPa Sold individually

Prices per each

Style

UN8NPVB UA8NPVB UNIP8NPVB UN16NPVB UA16NPVB UNIP16NPVB UN32NPVB UA32NPVB UNIP32NPVB

Capacity

Cap Size

Size (O.D.)

Assembly

Weight

1

26

8 oz. 8 oz. 8 oz. 16 oz. 16 oz. 16 oz. 32 oz. 32 oz. 32 oz.

24mm 24mm

73/4"L x 57/8"W x 12"H 73/4"L x 57/8"W x 12"H 73/4"L x 57/8"W x 12"H 73/4"L x 57/8"W x 12"H 73/4"L x 57/8"W x 12"H 73/4"L x 57/8"W x 12"H 73/4"L x 83/8"W x 15"H 73/4"L x 83/8"W x 15"H 73/4"L x 83/8"W x 15"H

Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle Assembled Unassembled Unassembled w/o Bottle

2 lbs. 2 lbs. 1.75 lbs. 2 lbs. 2 lbs. 1.75 lbs. 3.5 lbs. 3.5 lbs. 3.25 lbs.

$20.37 $16.71 $12.04 $23.03 $18.42 $12.90 $35.14 $28.12 $18.13

$17.16 $15.13 $10.55 $20.74 $16.58 $11.62 $31.63 $25.33 $16.29

53mm 53mm 63mm 63mm

torque WrencheS & FittingS For nalgene® BottleS Proper torquing of Nalgene® closures is critical to leakproof sealing. These wrenches can be used to confirm capping machine settings, to perform online inspections and to check torque values. Sold individually.

28

Prices per each

Style

KNTW250 KNTW75 KNTWF20 KNTWF24 KNTWF28 KNTWF38 KNTWF38430 KNTWF43 KNTWF53 KNTWF63

Call: 800-621-5808

Description

Mouth Size

Fits Torque Range

Weight

Wrench Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench Fitting for Wrench

/ " Drive 1/4" Drive 20/415mm 24/415mm 28/415mm 38/415mm 38/430mm 43/415mm 53/415mm 63/415mm

0-250 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-75 inch-lbs. 0-250 inch-lbs.

2.50 lbs. 2.15 lbs. .05 lb. .05 lb. .05 lb. .10 lb. .25 lb. .10 lb. .20 lb. .25 lb.

38

Fax: 800-723-4327

1

$415.70 $415.70 $51.98 $51.98 $51.98 $98.49 $178.77 $109.42 $111.61 $85.06

3

$383.72 $383.72 $47.99 $47.99 $47.99 $90.91 $165.00 $101.00 $103.04 $78.52

5

$366.79 $366.79 $45.89 $45.89 $45.89 $86.88 $157.72 $96.52 $98.49 $75.07

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 28-29 P 28-29_Standard 2/25/13 8:57 AM Page 29

I N F E C T I O U S S U B S TA N C E S H I P P E R S

PA C K A G I N G

InfectIous substance shIppers—ambIent Ambient Category A infectious substance shippers may be used to ship larger quantities of infectious material by all modes of transport. They are 4GU certified, do not require an overpack to ship FedEx and meet the requirements of ICAO and 49 CFR for Class 6.2 shipments. • KIDS62AR: 70mm pressure vessels, certified to hold 60ml of infectious material; 91/2" x 61/2" x 8" • KIDS262AR: 2 70mm pressure vessels, certified to hold 60ml of infectious material each; 91/2" x 61/2" x 8" • KIDS62AWR: 120mm, extra wide mouth pressure vessel certified to ship 120ml of infectious substance; 7" x 7" x 9" • Hydrostatically tested to 95 kPa • Sold individually Components Included

Prices per each

Style

KIDS62AR KIDS262A KIDS62AWR

Description

Weight

1

26

Single Shipper Double Shipper Wide Mouth Shipper

1 lb. 1.1 lbs. 1.1 lbs.

$11.41 $14.75 $21.50

$9.88 $13.07 $19.22

Components Included

KIDS62AR UN 4GU/Class 6.2

• 70mm pressure vessel with cap • UN marked fiberboard box • Partition

• 120mm pressure vessel with cap • UN marked fiberboard box • Partition

• 2 absorbent disks • 2 bubble sheets • Infectious Substance label

Components Included

• Absorbent disk • Bubble sheet • Infectious Substance label

• 2 70mm pressure vessels with caps • UN marked fiberboard box

• • • •

Partition 2 absorbent disks 2 bubble sheets Infectious Substance label

InfectIous substance shIpper— Insulated

KIDS62AWR UN 4GU/Class 6.2

KIDS262A UN 4GU/Class 6.2

HMS-69110

Package may be used for shipping infectious materials that must be kept cold during transport. With the addition of 5kg of pellet dry ice (not included), the package will keep your payload temperature at -60°F for 44 hours. Fully assembled kit is UN tested in accordance with ICAO for air shipment of infectious materials packed with dry ice. It can also be used for ground transport either before or after being shipped by air.

UN 4GU/Class 6.2

• 111/2" x 91/2" x 143/4" • Holds up to 5 vials of infectious materials with a total gross weight of 94g • Hydrostatically pressure tested to 95 kPa • Sold individually Components Included Prices per each

Style

Weight

1

10

51

HMS-69110

3 lbs.

$30.33

$29.23

$28.18

Call: 800-621-5808

Fax: 800-723-4327

• Wide mouth jar • UN marked fiberboard box • Universal absorbent

• Foam cushioning • Hazard class shipping labels • Tape

Order: labelmaster.com

29


2013 UN Packaging Mini Spring WP 30-31 P 30-31_• 2/27/13 8:28 AM Page 30

PA C K A G I N G

PLASTIC BOTTLES

NalgENE® IP2 HDPE BottlES Inspected and performance-tested from design and development through all stages of manufacturing, IP2 bottles have been designed and manufactured for tough applications. Originating in the lab, these bottles bring the same high quality to packaging applications and are available with narrow or wide mouths. Torque wrench required to meet manufacturer closure instructions. Torque wrenches sold separately. • Nalgene® HDPE IP2

• Polypropylene caps Prices per each

Style

Capacity

KP1 KPN1WUN KP4-R KPN4WUN KP8 KPN8WUN KPN16NUN KPN16WUNR KPN32NUN KPN32WUNR KPN128NUN

1 oz. 1 oz. 4 oz. 4 oz. 8 oz. 8 oz. 16 oz. 16 oz. 32 oz. 32 oz. 128 oz.

Cap Size Case Quantity Weight

20/415mm 28/415mm 24/415mm 38/415mm 24/415mm 43/415mm 28/415mm 53/415mm 38/430mm 63/415mm 38/430mm

1,000 1,000 500 500 250 250 125 125 50 50 6

.03 lb. .03 lb. .04 lb. .04 lb. .08 lb. .08 lb. .12 lb. .13 lb. .20 lb. .21 lb. .20 lb.

1

HIgH-DENSIty Poly BottlES Protect your liquids or solids during shipping with these plastic bottles. Available with either narrow or wide mouths and with F-style handles for easy pouring. Caps are sold separately.

• Sold individually 26

$1.41 $1.28 $2.13 $1.97 $2.13 $2.05 $3.27 $2.97 $2.49 $2.43 $4.17 $3.80 $3.86 $3.50 $4.26 $4.03 $6.91 $6.24 $7.28 $6.76 $31.17 $29.47

• High-density polyethylene

• Sold individually Prices per each

Style

Capacity

KP16U KP625R KP950R KP32U KP28RR* KP128CG

16 oz. 625cc 950cc 32 oz. 128 oz. 128 oz.

Cap Size Case Quantity Weight

28/400mm 53/400mm 53/400mm 38/400mm 38/400mm 38/400mm

142 240 126 112 48 48

.12 lb. .11 lb. .24 lb. .13 lb. .26 lb. .26 lb.

1

24

$1.52 $1.83 $2.89 $1.22 $2.37 $2.05

$1.42 $1.73 $2.82 $0.98 $2.27 $1.73

*KP28RR is a square bottle.

HDPE F-StylE Poly BottlES Protect your liquids or solids during shipping with these plastic bottles with F-style handles for easy pouring. Caps are sold separately. KP128F has 120g weight. KP128FHGW has 160g weight. • High-density polyethylene • Sold individually Prices per each

Fluorinated F-style bottles are available at labelmaster.com.

Style

Capacity

KP4F KP8F KP16F KP32F KP64F KP128F KP128FHGW KP320F KP320FNM

4 oz. 8 oz. 16 oz. 32 oz. 64 oz. 128 oz. 128 oz. 320 oz. 320 oz.

Cap Size Case Quantity Weight

24/400mm 28/400mm 33/400mm 33/400mm 38/400mm 38/400mm 38/400mm 63/485mm 38/400mm

700 375 240 120 80 50 50 32 32

.04 lb. .08 lb. .12 lb. .16 lb. .32 lb. .64 lb. .66 lb. 1.2 lbs. 1.2 lbs.

1

26

$0.90 $1.05 $1.12 $1.46 $1.97 $2.37 $2.61 $4.86 $4.86

$0.80 $1.01 $1.10 $1.41 $1.90 $2.27 $2.53 $4.64 $4.64

HDPE CylINDEr Poly BottlES & CaPS—FluorINatED These cylinder bottles will protect your liquids or solids during shipping. Available in narrow mouth only, the bottles are fluorinated to Level 5 and meet the requirements of the FDA for food contact. Caps are sold separately below. • High-density polyethylene

• Non-fluorinated bottles also available

• Sold individually

Prices per each

Style

KP2FL5 KP4FLR5 KP8FLR5 KP16FLR5 KP32FLR5 KC24PPFL KC28PPFL

30

Call: 800-621-5808

Capacity

Weight

1

26

2 oz. 4 oz. 8 oz. 16 oz. 32 oz. 24/410 Cap for Use w/2-, 4-, 8- and 16-oz. Bottles 28/410 Cap for Use w/2-, 4-, 8- and 16-oz. Bottles

.02 lb. .04 lb. .08 lb. .12 lb. .16 lb. .01 lb. .01 lb.

$1.95 $2.00 $2.15 $2.35 $2.65 $0.25 $0.28

$1.87 $1.92 $2.00 $2.25 $2.45 $0.22 $0.25

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring WP 30-31 P 30-31_• 2/27/13 8:28 AM Page 31

U N P L A S T I C PA I L S

PA C K A G I N G

new GeneratiOn Screw-tOp pailS & lidS Pails are available in 4 sizes, all with the patented "V" groove seal for products that need to breathe, extra-fine chemicals or high-viscosity liquids. Tamper-evident feature lets you see if the lid has been reopened. Easy-to-open Life Latch® lid creates a vacuum-tight, moisture-resistant seal to protect your product. Pails nest for compact storage. • • • •

Strong HDPE Packing Groups II and III solids Life Latch® lid Sold individually Prices per each

Style

Capacity

UN Marking

Weight

1

26

KNG1GALSS KNG312GALSS KNG5GALSS KNG612GALSS

1.25 gal. 3.5 gal. 5 gal. 6.5 gal.

1H2/Y6/S 1H2/Y19/S 1H2/Y30/S 1H2/Y30/S

2 lbs. 2.11 lbs. 3.33 lbs. 4 lbs.

$3.99 $11.24 $13.02 $14.07

$3.68 $10.66 $12.29 $13.44

life latch® Screw-tOp pailS & lidS 5-gal. liquid container features built-in lever for easy opening and closing, and is available with or without a built-in spout for easy pouring. Life Latch® lid creates a vacuum-tight seal to help protect your product. • • • •

Sturdy, puncture-resistant HDPE Packing Groups II and III liquids Life Latch® lid Sold individually Prices per each

Style

Description

K5GALSL No Spout K5GALSL-R With Built in Spout

UN Marking

Weight

1H2/Y1.5/30 1H2/Y1.5/30

6.2 lbs. 6.2 lbs.

1

26

$13.07 $12.02 $13.81 $12.65

Screw-tOp pailS & lidS Pail design combines the features of tight head pails with the wide mouth access of open head pails. The unique patented lever latch cover is easy to close, remove or reseal. Baby in the Bucket label is included on all sizes. White is the standard color for pails. • Packing Groups II or III solids • Can be used for shipping biohazard materials • Sold individually Prices per each

Style

Capacity

UN Marking

Weight

1

26

K2GALSS K5GALSS K612GALSS

2 gal. 5 gal. 6.5 gal.

1H2/Y12/S 1H2/Y30/S 1H2/Y30/S

1.5 lbs. 3.3 lbs. 4 lbs.

$7.19 $12.23 $13.02

$6.56 $11.24 $11.92

Snap-On pailS & lidS The 5-gal., white, plastic pail with metal handle can be ordered with a plain or Rieke spout lid. • • • •

5 gal. UN 1H2/Y1.5/20

Sturdy, puncture-resistant HDPE Packing Groups II and III liquids Pails and lids sold separately Sold individually Prices per each

Style

K-P5 KUS5GALM KUS5GALMP KUS5GALMR

Description

Weight

1

36

Pail Opener 5-Gal. Pail 5-Gal. Lid, Plain 5-Gal. Lid w/Reike Spout

6.2 lbs. 3.5 lbs. 3.5 lbs. 3.5 lbs.

$6.54 $5.01 $2.54 $3.26

$6.40 $4.81 $2.44 $3.13

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

31


2013 UN Packaging Mini Spring-Base WP 32-33 P 32-33_Standard 2/21/13 11:47 AM Page 32

PA C K A G I N G

BOTTLE CAPS

GuiDelineS to helP you SeleCt the aPProPriate Bottle anD CaP 1. Determine bottle material • Considerations for the type of material for the bottles include chemical compatibility, dispensing/storage requirements and transportation regulations (if applicable). • Glass bottles are available in amber or flint (colorless). Glass bottles come with or without a PVC coating that acts like a second skin to contain glass and contents in case of breakage. 2. Choose the size and style of the bottle • Considerations for size and style include the amount of material to be stored or transported and mode of transportation. • The capacity or volume that a bottle can contain is usually indicated in ml, cc or oz. • Bottles are available in narrow mouth—mouth size usually less than 38mm, and wide mouth—mouth size usually greater than 38mm.

3. Selecting the cap material • Considerations for choosing bottle cap and liner include chemical compatibility, dispensing/storage requirements and transportation regulations (if applicable). 4. Match mouth sizes of bottle and cap • Mouth sizes for both bottle and cap are shown as two units (e.g. 22/400mm). The first number is the mouth size (bottle opening), the second number is the bottle thread dimension. • If measuring mouth size, measure across the opening of the bottle top. • When choosing a cap, be certain that the mouth of the cap matches that of the bottle you selected. 5. Choose the proper closure for the bottle • This is mainly determined by compatibility testing and mouth size. • Labelmaster® offers free samples of caps for this purpose.

Pt SerieS: PhenoliC with teflon® liner Prices per each

Style

KC22PT KC24PT KC28PT KC33PT KC33PTB KC38PT KC48PTR KC53PT KC70PTG

PT Series

Cap Size

22/400mm 24/400mm 28/400mm 33/400mm 33/400mm 38/430mm 48/400mm 53/400mm 70/400mm

Color

Fits Bottle Size

Black 4-oz. Glass Black 8-oz. Glass Black 16-oz. Glass or Poly Green 32-oz. Glass or 4-oz. French Square Black 32-oz. Glass or 4-oz. French Square Black 2.5L & 4L Glass Pharmacy Jugs Green 4-oz. Glass or 16-oz. French Square Black 300cc or 500cc Glass; 625cc or 950cc Glass or Poly Black 8-oz., 16-oz. or 32-oz. Wide Mouth Glass Only

Weight

1

500

1M

.01 lb. .01 lb. .01 lb. .02 lb. .02 lb. .04 lb. .03 lb. .02 lb. .05 lb.

$0.30 $0.51 $0.39 $0.80 $0.77 $1.05 $2.67 $1.97 $3.56

$0.29 $0.50 $0.34 $0.76 $0.73 $1.00 $2.52 $1.90 $3.42

$0.26 $0.49 $0.31 $0.68 $0.65 $0.97 $2.45 $1.83 $3.12

PS SerieS: PolySeal® PhenoliC with Polyethylene Cone liner Prices per each

Style

KC22PS KC24PS KC28PS KC33PS KC38PS

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

22/400mm 24/400mm 28/400mm 33/400mm 38/400mm

Black Black Black Black Black

4-oz. Glass 8-oz. Glass or 1-oz. French Square 16-oz. Glass or Poly; 2-oz. French Square 32-oz. Glass or 4-oz. French Square 4-oz. Glass; 32-oz. or 128-oz. Poly

.01 lb. .01 lb. .01 lb. .02 lb. .02 lb.

$0.39 $0.39 $0.39 $0.52 $0.55

$0.37 $0.37 $0.37 $0.50 $0.53

$0.34 $0.34 $0.34 $0.47 $0.52

PS Series (Cone Liner)

PS SerieS: PolySeal® PhenoliC with Polyethylene DiSk liner Prices per each

Style

PS Series (Disk Liner)

KC43PS KC48PS KC58PS

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

43/400mm 48/400mm 58/400mm

Black Black Black

8-oz. French Square 16-oz. French Square 32-oz. French Square

.02 lb. .02 lb. .04 lb.

$0.77 $0.80 $0.91

$0.74 $0.77 $0.88

$0.72 $0.74 $0.85

FYI

32

Call: 800-621-5808

Cap samples available at no charge.

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 32-33 P 32-33_Standard 2/21/13 11:47 AM Page 33

BOTTLE CAPS

PA C K A G I N G

WPe SerieS: PolyProPylene CaPS for eCono JarS Prices per each

Style

KC48WPE KC58WPE KC70WPE

Cap Size

Color

48/400mm 58/400mm 70/400mm

White White White

Lining

Fits Bottle Size

Weight

Unlined 4-oz. Econo Jar .01 lb. F-217 Foam Liner 8-oz. Econo Jar .02 lb. PV Lining 16-oz. or 32-oz. Econo Jars .02 lb.

1

500

1M

$0.31 $0.44 $0.56

$0.28 $0.41 $0.50

$0.25 $0.33 $0.44

MWt SerieS: PolyProPylene With friCtion-fitted teflon速 liner

WPE Series

Prices per each

Style

KC22MWT KC24MWT KC28MWTR KC33MWTR KC38MWTR KC53MWTR KC70MWTR

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

22/400mm 24/400mm 28/400mm 33/400mm 38/400mm 53/400mm 70/400mm

Black Black Black Black Black Black Black

4-oz. Glass 8-oz. Glass 16-oz. Glass or Poly 32-oz. Glass 32-oz. or 128-oz. Poly 625cc or 950cc Glass or Poly 8-oz., 16-oz. or 32-oz. Wide Mouth Glass Only

.01 lb. .01 lb. .01 lb. .01 lb. .01 lb. .01 lb. .03 lb.

$0.79 $0.87 $0.63 $1.12 $1.01 $1.32 $1.42

$0.73 $0.81 $0.58 $1.05 $0.93 $1.23 $1.32

$0.68 $0.79 $0.55 $0.97 $0.87 $1.11 $1.23

MWT Series

PPf SerieS: White PP CaP With f-217 liner Prices per each

Style

KC24PPF KC28PPF KC33PPF KC38PPF KC63PPF

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

24/400mm 28/400mm 33/400mm 38/400mm 63/485mm

White White White White White

4-oz. Poly F-Style 8-oz. Poly F-Style 16-oz. or 32-oz. Poly F-Style 64-oz. or 128-oz. Poly F-Style 320-oz. Poly F-Style

.01 lb. .01 lb. .01 lb. .01 lb. .03 lb.

$0.26 $0.29 $0.30 $0.32 $0.66

$0.23 $0.26 $0.27 $0.30 $0.57

$0.19 $0.23 $0.25 $0.27 $0.47

PPF Series

PW SerieS: PolyProPylene With W77速 liner Prices per each

Style

KC28PW KC33PW

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

28/400mm 33/400mm

White White

16-oz. Glass or Poly 32-oz. Glass

.01 lb. .01 lb.

$0.32 $0.32

$0.31 $0.31

$0.30 $0.30

PP SerieS: PolyProPylene With Bartuff iii 3/4 SuPer high Barrier Polyethylene liner

PW Series

Prices per each

Style

KC28PP KC33PP

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

28/400mm 33/400mm

White White

16-oz. Glass or Poly 32-oz. Glass

.01 lb. .01 lb.

$0.37 $0.39

$0.34 $0.37

$0.32 $0.34

PPrW SerieS: White PP CaP With f-217 foaM liner for hdPe & Pet PaCkerS

PP Series

Prices per each

Style

KC33PPRW KC38PPRW KC45PPRW

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

33/400mm 38/400mm 45/400mm

White White White

75cc Packers 120cc, 150cc or 200cc Packers 250cc or 300cc Packers

.01 lb. .01 lb. .03 lb.

$0.30 $0.32 $0.43

$0.27 $0.30 $0.39

$0.25 $0.27 $0.34

PtW SerieS: PolyProPylene With PulP and teflon速 liner

PPRW Series

Prices per each

Style

KC70PTW

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

70/400mm

White

8-oz., 16-oz. or 32-oz. Wide Mouth Glass Only

.03 lb.

$3.56

$3.42

$3.12

PPV SerieS: PolyProPylene CaPS for Straight-Sided JarS

PTW Series

Prices per each

Style

KC58PPV KC63PPV KC89PPV

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

58/400mm 63/400mm 89/400mm

White White White

4 oz. 6 oz. 16 oz. or 32 oz.

.02 lb. .02 lb. .04 lb.

$0.26 $0.30 $0.55

$0.23 $0.27 $0.52

$0.19 $0.25 $0.47

PPV Series

Met SerieS: Metal CaP With PulP liner Prices per each

Style

KC48MET KC58MET KC70GMET

Cap Size

Color

Fits Bottle Size

Weight

1

500

1M

48/405mm 58/405mm 70-G-450

White White White

4-oz. Econo Jar 8-oz. Econo Jar 16-oz. or 32-oz. Econo Jars

.01 lb. .02 lb. .02 lb.

$0.30 $0.32 $0.43

$0.27 $0.30 $0.39

$0.25 $0.27 $0.34 MET Series

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

33


2013 UN Packaging Mini Spring WP 34-35 P 34-35_• 2/27/13 8:46 AM Page 34

GLASS BOTTLES

PA C K A G I N G

BostoN rouNd Glass Bottles Amber Bottles Style Capacity

KG401E KG400 KG801E KG800 KG1601E KG1600 KG3201CR KG3200

Type

Color

Cap Size

Case Quantity

Weight

1

120

4 oz. 4 oz. 8 oz. 8 oz. 16 oz. 16 oz. 32 oz. 32 oz.

Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated

Amber Amber Amber Amber Amber Amber Amber Amber

22/400mm 22/400mm 24/400mm 24/400mm 28/400mm 28/400mm 33/400mm 33/400mm

160 160 108 108 12 12 12 30

.22 lb. .26 lb. .36 lb. .43 lb. .67 lb. .79 lb. 1.04 lbs. 1.24 lbs.

$1.38 $2.13 $1.42 $2.73 $2.13 $3.72 $3.50 $5.62

$1.05 $1.97 $1.17 $2.59 $1.97 $3.42 $2.19 $4.40

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

120

4 oz. 4 oz. 4 oz. 4 oz. 8 oz. 8 oz. 16 oz. 16 oz. 32 oz. 32 oz.

PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated

Flint Flint Flint Flint Flint Flint Flint Flint Flint Flint

22/400mm 22/400mm 48/400mm 48/400mm 24/400mm 24/400mm 28/400mm 28/400mm 33/400mm 33/400mm

160 160 144 144 96 96 60 12 30 12

.26 lb. .22 lb. .36 lb. .30 lb. .44 lb. .35 lb. .79 lb. .67 lb. 1.24 lbs. 1.04 lbs.

$2.13 $1.38 $1.86 $1.52 $2.73 $1.42 $3.72 $2.13 $5.62 $3.50

$1.97 $1.05 $1.65 $1.10 $2.59 $1.17 $3.42 $1.97 $4.40 $2.19

Flint Bottles Prices per each

Style

KG400C KG451C KG040CU-CT KG040CU KG800C KG851C KG1650 KG1651C KG3250 KG3251CR

NoN-PVc rouNd amBer Glass Jars Prices per each

Style

KG120C KG300C KG500C KG625C KG950C

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

144

120cc 300cc 500cc 625cc 950cc

Non-Coated Non-Coated Non-Coated Non-Coated Non-Coated

Amber Amber Amber Amber Amber

38mm 53mm 53mm 53mm 53mm

180 96 60 48 36

.30 lb. .45 lb. .58 lb. .72 lb. .90 lb.

$1.73 $2.27 $2.43 $2.73 $3.27

$1.42 $2.13 $2.19 $2.43 $2.89

Glass Pharmacy JuGs Amber, Non-PVC Coated Pharmacy Jugs Prices per each

Style

KG2801C KG25LAJ KG4LAJ

Capacity

Type

Color

1 gal. 2.5L 4L

Non-Coated Non-Coated Non-Coated

Amber Amber Amber

Amber, PVC Coated Pharmacy Jug Style Capacity Type

KG25LAJ-CT KG4LAJ-CT

2.5L 4L

PVC Coated PVC Coated

Color

Amber Amber

Flint, Non-PVC Coated Pharmacy Jugs Style Capacity Type Color

KG2801 KG25LFJ

1 gal. 2.5L

Non-Coated Non-Coated

Flint Flint

Flint, PVC Coated Pharmacy Jug Style Capacity Type

Color

KG2801C-CT 1 gal.

Flint

PVC Coated

Cap Size Case Quantity

38/400mm 38/430mm 38/430mm

4 6 4

Cap Size Case Quantity

38/430mm 38/430mm

6 4

Cap Size Case Quantity

38/400mm 38/430mm

4 12

Cap Size Case Quantity

38/400mm

4

Weight

1

26

2.62 lbs. 2.95 lbs. 2.94 lbs.

$9.71 $10.26 $7.97

$9.33 $9.55 $7.67

Weight

1

26

2.80 lbs. 3.33 lbs.

$12.60 $10.22

$12.25 $9.69

Weight

1

26

2.72 lbs. 2.25 lbs.

$5.55 $9.11

$5.31 $8.80

Weight

1

26

3.15 lbs.

$11.52

$10.99

FYI Bottle caps sold separately

34

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring WP 34-35 P 34-35_• 2/27/13 8:47 AM Page 35

GLASS BOTTLES

PA C K A G I N G

French Square Flint GlaSS BottleS Prices per case

Style

KG05F KG171FC KG171F KG271FC KG271F

Capacity

Type

Color

Cap Size

Case Quantity

Weight

.5 oz. 1 oz. 1 oz. 2 oz. 2 oz.

Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated

Flint Flint Flint Flint Flint

20/400mm 24/400mm 24/400mm 28/400mm 28/400mm

576 280 280 240 240

34.56 lbs. 38 lbs. 28 lbs. 55 lbs. 45.2 lbs.

1

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

360

4 oz. 4 oz. 8 oz. 8 oz. 16 oz. 16 oz. 32 oz. 32 oz.

PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated PVC Coated Non-Coated

Flint Flint Flint Flint Flint Flint Flint Flint

33/400mm 33/400mm 43/400mm 43/400mm 48/400mm 48/400mm 58/400mm 58/400mm

120 120 84 84 40 40 24 24

.33 lb. .29 lb. .50 lb. .47 lb. .75 lb. .70 lb. 1.13 lbs. .96 lb.

$3.86 $0.90 $4.47 $1.52 $5.09 $2.65 $11.70 $8.85

$3.33 $0.87 $4.33 $1.46 $4.56 $2.16 $11.18 $8.26

$293.78 $742.56 $288.52 $519.33 $151.85

10

$284.96 $714.46 $273.34 $499.61 $148.30

Prices per each

Style

KG471FC KG471F KG871FC KG871F KG1671FC KG1671F KG3271FC KG3271F

StraiGht-Sided Flint GlaSS JarS Prices per each

Style

KG481S KG881S KG1681S KG3281S

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

120

4 oz. 8 oz. 16 oz. 32 oz.

Non-Coated Non-Coated Non-Coated Non-Coated

Flint Flint Flint Flint

58/400mm 70/400mm 89/400mm 89/400mm

24 24 12 12

.25 lb. .45 lb. .69 lb. .90 lb.

$0.81 $1.34 $1.41 $1.97

$0.79 $1.29 $1.37 $1.90

econo Flint GlaSS JarS Prices per case

Style

KG491P KG891P KG1691P KG3291P

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

26

4 oz. 8 oz. 16 oz. 32 oz.

Non-Coated Non-Coated Non-Coated Non-Coated

Flint Flint Flint Flint

48/405mm 58/405mm 70-G-450 70-G-450

24 12 12 12

5.16 lbs. 3.72 lbs. 6.36 lbs. 9.84 lbs.

$26.12 $14.74 $15.63 $18.22

$22.11 $10.86 $12.38 $14.57

PVc coated, round Flint GlaSS JarS Prices per each

Style

KG0880 KG1680 KG3280R

Capacity

Type

Color

Cap Size

Case Quantity

Weight

1

240

8 oz. 16 oz. 32 oz.

PVC Coated PVC Coated PVC Coated

Flint Flint Flint

70mm 70mm 70mm

24 48 12

.50 lb. .70 lb. 1.24 lbs.

$4.40 $4.64 $5.02

$3.66 $3.72 $4.47

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

35


2013 UN Packaging Mini Spring WP 36-37 P 36-37_• 2/27/13 8:33 AM Page 36

COMPONENT ACCESSORIES

PA C K A G I N G

PolyProPylEnE SorBEnt PouchES Great for packaging liquid products, the easy-to-use, sorbent-lined pouches come with gusseted liner, zip tie and tape for secondary bottle closure. • Universal sorbent • Sold individually Prices per each

Description

Size

Weight

1

100

250

8-oz. Pouch 16-oz. Pouch 32-oz. Pouch 128-oz. Pouch

6"L x 15"H 10"L x 20"H 10"L x 24"H 14"L x 30"H

1 lb. 1.4 lbs. 2.2 lbs. 3 lbs.

$2.58 $3.29 $4.55 $14.98

$2.45 $3.14 $4.35 $14.31

$2.39 $3.04 $4.22 $13.90

Style

KBAG8SSR KBAG16SSR KBAG32SSR KBAG128PPW

XEBEc™ SorBEnt PouchES Easy-to-use, zip-closure pouches come with absorbent and poly bag. • Polypropylene, cellulose or vermiculite sorbent • Sold individually Vermiculite Prices per each

Style

KSXP15 KSXP20 KSXP40 KSXP4C KSXP4P KSXP4V KSXP8C KSXP8P KSXP8V KSXP16C KSXP16P KVB16UN KSXP32C KSXP32P KVB32UN KSXP128C KSXP128P KVB128UN

Description

Size

Absorbent

Weight

1

50

For Vials For Vials For 4-oz. Bottle For 4-oz. Bottle For 4-oz. Bottle For 4-oz. Bottle For 8-oz. Bottle For 8-oz. Bottle For 8-oz. Bottle For 16-oz. Bottle For 16-oz. Bottle For 16-oz. Bottle For 32-oz. Bottle For 32-oz. Bottle For 32-oz. Bottle For 128-oz. Bottle For 128-oz. Bottle For 128-oz. Bottle

3"L x 5"H 4"L x 6"H 6"L x 9"H 6"L x 9"H 6"L x 9"H 6"L x 9"H 10"L x 12"H 10"L x 12"H 10"L x 12"H 12"L x 15"H 12"L x 15"H 12"L x 15"H 13"L x 19"H 13"L x 19"H 13"L x 19"H 14"L x 24"H 14"L x 24"H 14"L x 24"H

Polypropylene* Polypropylene* Polypropylene* Cellulose Polypropylene Vermiculite Cellulose Polypropylene Vermiculite Cellulose Polypropylene Vermiculite Cellulose Polypropylene Vermiculite Cellulose Polypropylene Vermiculite

.25 lb. .25 lb. .50 lb. .40 lb. .50 lb. .30 lb. 1 lb. 1 lb. 1 lb. 1.4 lbs. 1.4 lbs. 1.4 lbs. 2.2 lbs. 2.2 lbs. 2.2 lbs. 3 lbs. 3 lbs. 3 lbs.

$1.31 $1.48 $2.82 $6.46 $9.33 $6.53 $6.38 $9.71 $6.99 $7.22 $10.77 $7.59 $9.19 $16.86 $11.09 $12.54 $20.27 $13.51

$1.23 $1.39 $2.59 $6.15 $8.90 $6.38 $6.17 $9.23 $6.63 $6.28 $10.25 $7.22 $8.72 $16.01 $10.53 $10.40 $17.77 $12.07

Cellulose

Polypropylene

*Polypropylene is pad style.

EPS Foam For GlaSS BottlES Foam fits around the bottle for protection against breakage during shipment. • • • •

Economical EPS (expanded polystyrene) foam Side-loading coffin style Top-loading drop-in style Sold in sets of 2

Side-Loading “Coffin Style” Foam Sets Prices per set of 2

Style

KF4S KF8S KF16S KF32S KF40S

Type

Description

Size (O.D.)

Case Qty.

Weight

1

26

51

Side-Loading "Coffin Style" Side-Loading "Coffin Style" Side-Loading "Coffin Style" Side-Loading "Coffin Style" Side-Loading "Coffin Style"

For 4-oz. Bottle For 8-oz. Bottle For 16-oz. Bottle For 32-oz. Bottle For 40-oz. Bottle

35/8"L x 63/4"W x 35/8"H 4"L x 75/8"W x 4"H 43/4"L X 9"W x 43/4"H 55/8"L X 107/8"W x 55/8"H 55/8"L X 107/8"W x 55/8"H

184 144 80 40 40

.1 lb. .6 lb. .2 lb. .2 lb. .6 lb.

$1.82 $2.07 $3.00 $3.51 $3.86

$1.77 $1.99 $2.90 $3.40 $3.74

$1.68 $1.90 $2.77 $3.24 $3.56

Description

Size (O.D.)

Case Qty.

Weight

1

26

51

For 19-oz. Bottle For 20-oz. Bottle For 128-oz. Bottle For 2.5L Pharmacy Bottle For 4 x 2.5L Pharmacy Bottles For 4L Pharmacy Bottle

5"L x 5"W x 103/4"H 5"L x 5"W x 97/8"H 10"L x 10"W x 171/4"H 73/8"L x 73/8"W x 141/2"H 133/4"L x 133/4"W x 141/2"H 10"L x 10"W x 171/4"H

60 75 6 18 4 6

.8 lb. .8 lb. 1 lb. 1 lb. 1.5 lbs. 1 lb.

$2.60 $2.30 $12.11 $4.57 $12.13 $12.11

$2.50 $2.22 $11.73 $4.44 $11.75 $11.73

$2.40 $2.12 $11.19 $4.22 $11.20 $11.19

Top-Loading “Drop-In Style” Foam Sets Style Type

KF19T KF20T KF128ST KF25LPT KF425LPT KF4LPT

36

Top-Loading "Drop-In Style" Top-Loading "Drop-In Style" Top-Loading "Drop-In Style" Top-Loading "Drop-In Style" Top-Loading "Drop-In Style" Top-Loading "Drop-In Style"

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 36-37 P 36-37_Standard 2/21/13 4:05 PM Page 37

S P E C I A LT Y PA C K A G I N G Prices per each

Type

Style

For Side-Loading "Coffin Style" For Side-Loading "Coffin Style" For Side-Loading "Coffin Style" For Side-Loading "Coffin Style"

KB4S KB8S KB16S KB32S

Overpack boxes are designed for shipping the 2-piece EPS foam sets.

Description

Size (O.D.)

4-oz. Set 4"L x 4"W x 71/2"H 8-oz. Set 41/2"L x 41/2"W x 81/2"H 16-oz. Set 5"L x 5"W x 10"H 32-oz. or 40-oz. Set 6"L x 6"W x 11"H

Overpack Boxes for Top-Loading “Drop-In Style” Foam Sets Type Description Style

• Sturdy fiberboard • Sold individually

KB19T KB20T KB25LPT KB425LPT KB128-4L

For Top-Loading "Drop-In Style" For Top-Loading "Drop-In Style" For Top-Loading "Drop-In Style" For Top-Loading "Drop-In Style" For Top-Loading "Drop-In Style"

Size (O.D.)

19-oz. Set 47/8"L x 47/8"W x 11"H 20-oz. Set 47/8"L x 47/8"W x 10"H 2.5L Set 75/16"L x 75/16"W x 155/8"H 4 x 2.5L Set 139/16"L x 139/16"W x 155/8"H 128-oz. or 4L Set 97/8"L x 97/8"W x 171/4"H

Weight

1

26

51

.15 lb. .18 lb. .25 lb. .34 lb.

$2.07 $1.98 $2.05 $2.18

$1.99 $1.92 $1.97 $2.12

$1.90 $1.83 $1.88 $2.02

Weight

1

26

51

.55 lb. .50 lb. 1.7 lbs. 2.5 lbs. 1.8 lbs.

$2.49 $2.69 $2.09 $2.87 $2.44

$2.44 $2.64 $2.05 $2.82 $2.40

$2.37 $2.56 $1.98 $2.73 $2.33

10 gal. UN 1G/Y60/S 161⁄2 gal. UN 1G/X75/S 24 gal. UN 1G/X75/S

Fiber Drums

30 gal. UN 1G/Y125/S

Featuring a telescoping, 2-piece design with flat tops and bottoms, these drums are ideal for uniform stacking and palletizing. They incinerate quickly and completely, and are excellent for shipping solid, granulated or powdered products. • 100% fiber • UN-approved for shipping, except for KMAFD55S which is unmarked • Sold individually

5 gal. UN 1G/X60/S

Round Drums

10 gal. Prices per each

UN 1G/Y70/S

Style

Capacity

Size (O.D.)

Weight

1

10

50

KMAFD10R KMAFD165R KMAFD24R KMAFD30R

10 gal. 161/2 gal. 24 gal. 30 gal.

141/2" dia. x 151/2"H 161/8" dia. x 201/8"H 151/8" dia. x 281/2"H 18" dia. x 253/4"H

6 lbs. 8 lbs. 10 lbs. 11 lbs.

$20.92 $26.29 $34.86 $33.85

$20.50 $25.78 $34.16 $33.18

$20.09 $25.25 $33.47 $32.51

Size (O.D.)

Weight

1

10

50

12" dia. x 9"H 121/4" dia. x 163/4"H 141/2" dia. x 153/4"H 143/4" dia. x 213/4"H 211/2" dia. x 323/8"H

4 lbs. 6 lbs. 7 lbs. 11 lbs. 17 lbs.

$16.91 $18.12 $25.12 $48.56 $55.39

$16.24 $17.76 $23.53 $46.02 $54.29

$15.92 $17.41 $22.18 $43.84 $53.20

15 gal. UN 1G/X75/S 30 gal.

Square Drums Style Capacity

KMAFD05S KMAFD10S KMAFD15S KMAFD30S KMAFD55S

5 gal. 10 gal. 15 gal. 30 gal. 55 gal.

UN 1G/Y120/S

Fluorescent bulb recycling Fiber Drums Reusable drums reduce waste and disposal costs. These drums are an environmentally friendly and cost-effective method of bulb recycling. They are clearly printed to alert handlers to use care and return the drums after use. Label area allows labels to be removed without damage to the drum. • 100% fiber • Moisture- and impact-resistant metal chime and polyseal • Sold individually Prices per each

Style

KMFRD10 KMFRD18 KMFRD21

Description

Size (O.D.)

Weight

1

10

25

85 4' Bulbs 85 4' or 8' Bulbs 190 4' Bulbs

151/2" dia. x 481/8"H 151/2" dia. x 96"H 23" dia. x 481/8"H

10 lbs. 18 lbs. 21 lbs.

$54.06 $56.56 $64.35

$52.49 $53.95 $62.67

$51.49 $52.34 $60.81

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

37

PA C K A G I N G

overpack boxes For eps Foam sets

Overpack Boxes for Side-Loading “Coffin Style” Foam Sets


2013 UN Packaging Mini Spring-Base WP 38-39 P 38-39_Standard 2/21/13 11:53 AM Page 38

PA C K A G I N G

PA I N T C A N S & A C C E S S O R I E S

Our full line of paint cans and accessories will prepare you to ship epoxy phenolic lining in capacities from 1⁄4 pt. up to 2 gal. Paint can clips and ring locks

ePoxy Phenolic lined Paint cans

Unlined Paint cans

Prices per each

Style

K22065R K22061R K22046R K3021204R K3113354R

Prices per each

Capacity

Weight

1

250

500

/ pt. 1/2 pt. 1 pt. 1 qt. 1 gal.

.10 lb. .14 lb. .20 lb. .28 lb. .70 lb.

$1.26 $1.33 $1.42 $2.10 $3.26

$1.22 $1.28 $1.38 $2.03 $3.02

$1.16 $1.23 $1.33 $1.95 $2.82

14

Universal locking rings

Style

K22063R K22060R K22045R KM32PR KM28PNR KM55PNR K0001841R KM2000

Capacity

Weight

1

250

500

/ pt. 1/2 pt. 1 pt. 1 qt. 1 gal. 5.5L 5 qt. 2 gal.

.10 lb. .14 lb. .20 lb. .28 lb. .70 lb. .94 lb. 1 lb. 1.25 lbs.

$1.24 $1.15 $1.39 $1.74 $3.24 $8.71 $5.95 $23.92

$1.19 $1.11 $1.35 $1.69 $3.16 $8.46 $5.79 $23.20

$1.14 $1.07 $1.30 $1.62 $3.01 $8.09 $5.53 $22.21

14

Brockway armlock™ locking rings

Prices per each

Style

KURL4 KURL8 KURL32-LM KURL1PC-LM

38

Prices per each

Description

Weight

1

500

1500

Style

Description

Weight

1

500

1500

Fits 1/2 pt. Fits 1 pt. Fits 1 qt. Fits 1 gal., 5 qt. & 5.5L

.01 lb. .02 lb. .04 lb. .08 lb.

$0.35 $0.60 $0.43 $0.61

$0.34 $0.59 $0.42 $0.60

$0.33 $0.56 $0.39 $0.57

KRL32UN KRL1PC

Fits 1 qt. Fits 1 gal.

.04 lb. .08 lb.

$0.85 $1.02

$0.83 $1.00

$0.80 $0.96

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 38-39 P 38-39_Standard 2/21/13 11:53 AM Page 39

PA I N T C A N S & A C C E S S O R I E S

PA C K A G I N G

liquid materials. Paint cans are available either unlined or with Make sure you seal your paint can with the paint can closer. will help ensure a tight lid seal.

F-style Cans

Paint Can Closer and ringloCk tool

Includes Solvaseal-lined cap and inner seal.

Seals round paint cans from 1/2 pt. to 1 gal.

Prices per each

Style

KFQ134 KFC134R

Prices per each

Capacity

Weight

1

250

500

1 qt. 1 gal.

.28 lb. .70 lb.

$2.48 $5.19

$2.41 $5.05

$2.31 $4.82

Style

Weight

1

3

7

KMPCTR

5 lbs.

$416.38

$405.56

$400.16

Paint Can Foam end CaPs

Paint Can CliPs

Prices per each

Prices per each bag of 1,000 clips

Style

Weight

1

250

1M

KF206A

.05 lb.

$0.99

$0.97

$0.86

Call: 800-621-5808

Fax: 800-723-4327

Style

KM32CC KM28CC

Description

Weight

1

5

10

1 qt. or 1 pt. 1 gal.

1.65 lbs. 1.90 lbs.

$28.14 $28.14

$27.30 $27.30

$26.13 $26.13

Order: labelmaster.com

39


2013 UN Packaging Mini Spring WP 40-41 P 40-41_• 2/27/13 8:37 AM Page 40

PA C K A G I N G

S T E E L PA I L S These pails are a convenient way to ship liquid hazardous materials. The rugged and reinforced steel pails can protect your product with airtight seals and incredibly long life expectancies.

1-Gallon Closed Head Pails

KM1000EL

KM1000RL

KM1020EL

KM1020RL

KM1080EL

Prices per each

Style

KM1000EL KM1000RL KM1020EL KM1020RL KM1080EL

Capacity

Lining

Spout

UN Marking

Packing Group

Weight

1

36

60

1 gal. 1 gal. 1 gal. 1 gal. 1 gal.

Epoxy Phenolic Rust Inhibitor Epoxy Phenolic Rust Inhibitor Epoxy Phenolic

/" 3/4" 2" 2" Rieke

1A1/X1.5/250 1A1/X1.5/250 1A1/X1.5/250 1A1/X1.5/250 1A1/X1.5/250

I, II and III I, II and III I, II and III I, II and III I, II and III

2 lbs. 2 lbs. 2 lbs. 2 lbs. 2 lbs.

$31.61 $30.04 $32.21 $30.88 $28.32

$29.23 $27.40 $30.61 $28.88 $26.27

$28.37 $26.17 $29.07 $27.18 $25.54

34

5-Gallon Closed Head Pails

KM5010EL

KM5010RL

KM5015

KM5020EL

KM5020RL

KM5021

KM5030RL

KM5080EL

KM5234EL

KM5234RL

Prices per each

Style

KM5010EL KM5010RL KM5015 KM5020EL KM5020RL KM5021 KM5030RL KM5080EL KM5234EL KM5234RL

40

Capacity

Lining

Spout

UN Marking

Packing Group

Weight

1

36

60

5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal.

Epoxy Phenolic Rust Inhibitor Rust Inhibitor Epoxy Phenolic Rust Inhibitor Rust Inhibitor Rust Inhibitor Epoxy Phenolic Epoxy Phenolic Rust Inhibitor

/" 3/4" Rieke 2" 2" Pull-Out w/21/8" Screw Cap Rieke Rieke 3/4" and 2" 3/4" and 2"

1A1/X1.3/350 1A1/X1.3/350 1A1/Y1.6/150 1A1/X1.3/350 1A1/X1.3/350 1A1/Y1.6/150 1A1/X1.5/300 1A1/X1.5/300 1A1/X1.3/350 1A1/X1.3/350

I, II and III I, II and III II and III I, II and III I, II and III II and III I, II and III I, II and III I, II and III I, II and III

4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs.

$26.45 $24.37 $19.24 $31.07 $24.37 $18.70 $25.03 $26.45 $33.53 $30.91

$24.83 $23.32 $17.06 $29.02 $23.32 $16.58 $23.36 $24.83 $32.22 $29.67

$23.32 $22.30 $16.44 $26.35 $22.30 $15.98 $21.23 $23.32 $30.96 $28.53

34

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 40-41 P 40-41_Standard 2/26/13 10:18 AM Page 41

S T E E L PA I L S

PA C K A G I N G

• 1-gal pails passed hydrostatic pressure tests to 250 kPa • Closed head, 5-gal. pails pass hydrostatic pressure test

• Open head pails, if certified for use with liquids, pass the hydrostatic pressure test to 100 kPa • Sold individually

5-Gallon open Head pails

KM5005RL KM5019PL

KM5002RL (Solids) KM5003RL (Liquids) KM5017PL

KM5009RL

KM5006RL

KX1045S-R

KM5013PL

KM5014PL Prices per each

Style

KM5002RL KM5003RL KM5005RL KM5006RL KM5009RL KM5013PL KM5014PL KM5017PL KM5019PL KX1045S-R

Capacity

5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal. 5 gal.

Lining

Cover Type

UN Marking

Packing Group

Rust Inhibitor Lug Cover No Spout 1A2/Y50/S Rust Inhibitor Lug Cover No Spout 1A2/Y1.5/100 Rust Inhibitor Lug Cover w/Rieke 1A2/Y1.5/100 Rust Inhibitor Lug Cover No Spout 1A2/Y1.5/100 Rust Inhibitor Lug Cover w/Rieke 1A2/Y1.5/100 Gold Phenolic Lug Cover No Spout 1A2/Y1.5/100 Gold Phenolic Lug Cover w/Rieke 1A2/Y1.5/100 Gold Phenolic Lug Cover No Spout 1A2/Y1.5/100 Gold Phenolic Lug Cover w/Rieke 1A2/Y1.5/100 Rieke Spout for Use w/1-Gal. or 5-Gal. Pails w/Rieke Openings

II and III II and III II and III II and III II and III II and III II and III II and III II and III

Weight

1

36

60

4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 4.8 lbs. 0.5 lb.

$19.15 $19.15 $19.60 $18.54 $19.60 $19.82 $20.88 $19.82 $20.88 $1.48

$17.63 $17.63 $17.38 $16.44 $17.38 $17.57 $18.52 $17.57 $18.52 $1.18

$16.28 $16.28 $16.75 $15.84 $16.75 $16.93 $17.84 $16.93 $17.84 $0.79

sHop pails & lids Used for non-regulated or exempt products like paints, inks and driveway sealers, these rugged, reinforced steel pails and lids are available in a variety of sizes and options. • • • • •

Heavy-duty, 29-ga. steel 2-, 3.5- or 5-gal. capacity Lug cover with or without Rieke spout Rust inhibitor lining Sold individually

KMC35RLS KM2000RL

KM3500RL

KM4500RL

Prices per each

Style

KM2000RL KM3500RL KM4500RL KMC20RL KMC35RL KMC35RLS

Description

Weight

1

36

60

2-Gal. Pail 3.5-Gal. Pail 5-Gal. Pail Lid for 2-Gal. Pails Plain Lug Cover for 3.5- & 5-Gal. Pails Lug Cover w/Rieke Spout for 3.5- & 5-Gal Pails

3 lbs. 3.75 lbs. 4.5 lbs. 1.5 lbs. 2.0 lbs. 2.0 lbs.

$8.70 $8.80 $8.90 $2.80 $2.50 $3.50

$8.21 $8.30 $8.40 $2.64 $2.36 $3.30

$7.63 $7.72 $7.81 $2.46 $2.19 $3.07

KMC35RL

KMC20RL

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

41


2013 UN Packaging Mini Spring-Base WP 42-43 P 42-43_Standard 2/26/13 8:16 AM Page 42

STEEL DRUMS

PA C K A G I N G

Skolnik Steel drumS

Durable and heavy-duty drums for storage and shipping. The standard color is black with a white top. Red, blue, yellow, green or gray options are available. Rust-inhibitor lining is standard, but order epoxy pheolic lining for $10 additional. Simply add EP to end of the style number.

Skolnik open Head Steel drumS

Quick Lever™ Closure

• • • •

Cold rolled steel with EPDM gaskets Rust-inhibitor lining Closure: 12-ga. bolt ring or Quick Lever™ Sold individually

Bolt Ring Closure

Quick Lever Closure Prices per each

Style

KM5COQ KM8COQ KM10COQ KM16COQ KM2017COQ KM3017COQ KM5507Q KM5517COQ

Capacity

Gauge

UN Marking Solids

UN Marking Liquids

Closure

Weight

5 gal. 8 gal. 10 gal. 16 gal. 20 gal. 30 gal. 55 gal. 55 gal.

18/20/20 18/20/20 18/20/20 18/20/20 18/18/18 16/18/18 16/18/18 16/16/16

1A2/X60/S 1A2/X100/S 1A2/X120/S 1A2/Y200/S 1A2/X220/S 1A2/X235/S 1A2/X400/S 1A2/X430/S

1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.4/150 1A2/Y1.4/175

Quick Lever Closure Quick Lever Closure Quick Lever Closure Quick Lever Closure Quick Lever Closure Quick Lever Closure Quick Lever Closure Quick Lever Closure

10 lbs. 12 lbs. 14 lbs. 19 lbs. 30 lbs. 35 lbs. 60 lbs. 60 lbs.

Capacity

Gauge

UN Marking Solids

UN Marking Liquids

Closure

Weight

8 gal. 10 gal. 20 gal. 30 gal. 55 gal. 55 gal. 55 gal.

20/20/20 20/20/20 18/18/18 16/18/18 18/20/20 16/18/18 16/16/16

1A2/X96/S 1A2/X120/S 1A2/X220/S 1A2/X235/S 1A2/Y425/S 1A2/X400/S 1A2/X430/S

1A2/Y1.8/150 1A2/Y1.8/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.2/100 1A2/Y1.5/150 1A2/Y1.5/175

Bolt Ring Closure Bolt Ring Closure Bolt Ring Closure Bolt Ring Closure Bolt Ring Closure Bolt Ring Closure Bolt Ring Closure

12 lbs. 14 lbs. 30 lbs. 35 lbs. 60 lbs. 60 lbs. 60 lbs.

1

5

$53.82 $62.18 $68.36 $69.55 $91.36 $111.55 $111.55 $126.82

10

$49.33 $57.00 $62.67 $63.75 $83.75 $102.25 $102.25 $116.25

$44.18 $51.04 $56.12 $57.09 $75.00 $91.57 $91.57 $104.10

Bolt Ring Closure Prices per each

Style

KM8CO KM10CO KM2017CO KM3017CO KM5504 KM5507 KM5517CO

Skolnik cloSed Head Steel drumS

• Cold rolled steel with 2" steel plug and 3/4" vent

1

5

$59.91 $66.09 $86.64 $108.64 $88.27 $107.00 $111.36

10

$54.92 $60.58 $79.42 $99.58 $80.92 $98.08 $102.08

$49.18 $54.25 $71.12 $89.18 $72.46 $87.84 $91.42

• Rust-inhibitor lining • Sold individually

Prices per each

Style

KM8TH KM10TH KM2017E1 KM3008 KM3017E2 KM5514R KM5516R

Capacity

Gauge

UN Marking Liquids

Weight

1

5

10

8 gal. 10 gal. 20 gal. 30 gal. 30 gal. 55 gal. 55 gal.

20/20/20 20/20/20 16/20/16 20/20/20 16/20/16 18/20/18 16/16/16

1A1/X1.4/250 1A1/X1.4/250 1A1/X1.2/300 1A1/Y1.5/300 1A1/X1.2/300 1A1/X1.6/300 1A1/Y1.8/300

12 lbs. 14 lbs. 30 lbs. 35 lbs. 35 lbs. 60 lbs. 60 lbs.

$51.36 $57.73 $76.82 $72.64 $88.82 $83.47 $87.06

$47.08 $52.92 $70.42 $66.58 $81.42 $81.81 $85.32

$42.16 $47.39 $63.06 $59.63 $72.91 $80.17 $83.62

Skolnik StainleSS Steel SeamleSS nitric acid drumS Ideal for situations that require the highest purity and compatibility of materials, stainless steel seamless process drums offer exceptional resistance to oxidation and nitric acid. They also outperform carbon steel drums in corrosion resistance, tensile strength and reusability. • • • •

16- ga., 304 stainless steel with EPDM gaskets Seamless bottom with crevice-free interior Rust-inhibitor lining Sold individually Prices per each

Style

KM5501 KM5502

42

Capacity

Gauge

Drum Type

UN Marking Liquids

Closure

Weight

55 gal. 55 gal.

16/16/16 16/16/16

Open Head Closed Head

1A1/X2.0/600

Bolt Ring 2" and 3/4" Stainless Steel Plugs

56 lbs. 81 lbs.

Call: 800-621-5808

Fax: 800-723-4327

1

$1,607.69 $2,338.46

5

$1,536.76 $2,235.29

10

$1,492.86 $2,171.43

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 42-43 P 42-43_Standard 2/26/13 8:16 AM Page 43

STEEL DRUMS

PA C K A G I N G

Skolnik PiH oveRPaCk Steel dRumS

Open Head Bolt RIng Closure

Use these drums for overpacking materials that are poisonous by inhalation (PIH). • • • •

16-ga. steel Packing Group I, Hazard Zones A and B Passed hydrostatic pressure test to 100 kPa Sold individually Prices per each

Style

KM20PIH KM30PIH KM55PIH KM85PIH

Capacity

Gauge

UN Marking Solids Weight

20 gal. 30 gal. 55 gal. 85 gal.

16/16/16 16/16/16 16/16/16 16/16/16

1A2/X195/S 1A2/X235/S 1A2/X430/S 1A2/X440/S

30 lbs. 35 lbs. 60 lbs. 80 lbs.

1

$109.09 $130.91 $123.64 $172.73

5

$100.00 $120.00 $113.33 $158.33

10

$89.55 $107.46 $101.49 $141.79

Round Plug CaPSealS

KTC34B KTC20B

Durable capseals crimp over round head steel drum plugs to provide security. Once crimped in place with a sealing tool sold below, they must be destroyed to be removed. The built-in gasket provides extra sealing power to prevent leaks. KTC34B KTC20SP

• White or attention-getting Sealed For Your Protection imprint • Requires tool for proper installation • Sold individually Prices per each

Style

KTC34B KTC34SP KTC20B KTC20SP KTCA34 KTCA34SP KTCA20 KTCA20SP KTCP34 KTCP34SP KTCP20 KTCP20SP

Size

Material

Color

Weight

1

250

500

/" 3/4" 2" 2" 3/4" 3/4" 2" 2" 3/4" 3/4" 2" 2"

Steel Steel Steel Steel Aluminum Aluminum Aluminum Aluminum Plastic Plastic Plastic Plastic

White Imprinted White Imprinted White Imprinted White Imprinted White Imprinted White Imprinted

.25 lb. .25 lb. .50 lb. .50 lb. .12 lb. .12 lb. .25 lb. .25 lb. .12 lb. .12 lb. .25 lb. .25 lb.

$0.12 $0.24 $0.24 $0.34 $0.32 $0.34 $0.69 $0.68 $0.22 $0.74 $0.48 $0.39

$0.09 $0.23 $0.22 $0.32 $0.30 $0.32 $0.66 $0.66 $0.22 $0.73 $0.47 $0.38

$0.07 $0.22 $0.21 $0.31 $0.30 $0.31 $0.65 $0.64 $0.22 $0.72 $0.46 $0.37

34

KTCA34 KTCA20

KTCA34SP KTCA20SP

KTCP34P2 0

See our full line of round and hex head capseals and tools at labelmaster.com

Call: 800-621-5808

Fax: 800-723-4327

KTCP34SP KTCP20SP

Order: labelmaster.com

43


2013 UN Packaging Mini Spring WP 44-45 P 44-45_• 2/27/13 8:49 AM Page 44

PA C K A G I N G

S T E E L U N S A LVA G E D R U M S

SkOLNIk SALvAGE DRUMS Use these heavy-duty, UN-tested salvage drums to handle damaged or leaking containers. May be used to meet 49 CFR 173.3(c) requirements. A compatible sorbent and/or cushioning may be used to help comply with salvage drum requirements. Each drum has 1 multilingual Salvage Drum label. Both "T" certified drums as well as overnight shipping are available upon request. Corrosion-resistant epoxy phenolic lining is available for an additional $10. Add EP to the end of the style number. 110-Gallon 85-Gallon

Quick Lever Closure Ring™ Order Skolnik UN salvage drums that close in seconds with a simple lever lock and no tools!

GUIDE TO SAFE SECONDARY CONTAINMENT For best results, follow these guidelines:

85-Gallon 55-Gallon 30-Gallon

10-Gallon

55-Gallon 20-Gallon 30-Gallon 8-Gallon

10-Gallon

Holds 5-gallon pail or smaller

Holds 15- to 20-gallon drum or smaller

Holds 30-gallon drum or smaller

Holds 55-gallon drum or smaller

QUICk LEvER CLOSURE RING™ DRUMS The Quick Lever Closure Ring™ is offered on all drums except the 96- and 110-gal. sizes. Prices per each

UN Marking Style

KM0501Q KM0802Q KM102Q KM2017CSQ KM3017CSQ KM5500Q KM5517CSQ KM8520Q KM8515Q KM8500Q

Capacity

Size (I. D.)

Gauge

Solids

Liquids

Weight

5 gal. 8 gal. 10 gal. 20 gal. 30 gal. 55 gal. 55 gal. 85 gal. 85 gal. 85 gal.

101/4"H x 14" dia. 151/4"H x 14" dia. 181/4"H x 14" dia. 191/4"H x 181/4" dia. 271/2"H x 181/4" dia. 33"H x 221/2" dia. 33"H x 221/2" dia. 37"H x 26" dia. 37"H x 26" dia. 37"H x 26" dia.

20/20/20 18/20/20 18/20/20 18/18/18 16/18/18 16/18/18 16/16/16 20/20/20 18/18/18 16/16/16

1A2/X60/S 1A2/X96/S 1A2/X120/S 1A2/X220/S 1A2/X235/S 1A2/X400/S 1A2/X430/S 1A2/Y440/S 1A2/X440/S 1A2/X440/S

1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.4/150 1A2/Y1.4/175 Solids Only 1A2T/Y320/S 1A2T/Y320/S

10 lbs. 12 lbs. 14 lbs. 30 lbs. 35 lbs. 60 lbs. 60 lbs. 80 lbs. 80 lbs. 80 lbs.

1

$53.91 $62.27 $68.45 $91.36 $111.55 $127.62 $126.82 $146.36 $165.00 $178.18

5

$49.42 $57.08 $62.75 $83.75 $102.25 $125.12 $116.25 $134.17 $151.25 $163.33

10

$44.25 $51.12 $56.19 $75.00 $91.57 $122.67 $104.10 $120.15 $135.45 $146.27

STANDARD BOLT RING DRUMS Standard Bolt Ring Drums feature 12-ga. bolt rings and rubber gaskets, except the 8- and 10-gal. sizes, which have 13-ga. bolt rings. Prices per each

UN Marking Style

Capacity

Size (I. D.)

Gauge

Solids

Liquids

Weight

1

KM0501 KM0802 KM102 KM2017CS KM3017CS KM5500 KM5517CS KM8520 KM8515 KM8500 KM9600 KM11000

5 gal. 8 gal. 10 gal. 20 gal. 30 gal. 55 gal. 55 gal. 85 gal. 85 gal. 85 gal. 96 gal. 110 gal.

101/4"H x 14" dia. 151/4"H x 14" dia. 181/4"H x 14" dia. 191/4"H x 181/4" dia. 271/2"H x 181/4" dia. 33"H x 221/2" dia. 33"H x 221/2" dia. 37"H x 26" dia. 37"H x 26" dia. 37"H x 26" dia. 41"H x 26" dia. 41"H x 30" dia.

20/20/20 18/20/20 18/20/20 18/18/18 16/18/18 16/18/18 16/16/16 20/20/20 18/18/18 16/16/16 16/16/16 16/16/16

1A2/X60/S 1A2/X96/S 1A2/X120/S 1A2/X220/S 1A2/X235/S 1A2/X400/S 1A2/X430/S 1A2/Y440/S 1A2/X440/S 1A2/X440/S 1A2/X440/S 1A2/Y409/S

1A2/Y1.8/150 1A2/Y1.8/150 1A2/Y1.8/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/150 1A2/Y1.5/175 Solids Only 1A2T/Y320/S 1A2T/Y320/S Solids Only Solids Only

10 lbs. 12 lbs. 14 lbs. 30 lbs. 35 lbs. 60 lbs. 60 lbs. 80 lbs. 80 lbs. 80 lbs. 85 lbs. 102 lbs.

$51.36 $59.91 $66.09 $86.36 $106.82 $107.00 $122.27 $140.91 $159.18 $215.93 $194.55 $381.82

5

$47.08 $54.92 $60.58 $79.17 $97.92 $98.08 $112.08 $129.17 $145.92 $196.30 $178.33 $350.00

10

$45.48 $49.18 $54.25 $70.90 $87.69 $87.84 $100.37 $115.67 $130.67 $186.78 $159.70 $313.43

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

44

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring WP 44-45 P 44-45_• 2/27/13 8:49 AM Page 45

PLASTIC UN CERTIFIED DRUMS 55 gal.

Blow-molded, high molecular weight, plastic drums have seamless construction and are compatible with a wide range of products. Colors are molded-in and won't rust, fade or peel. All drums, except 15-gal., have 1 2" NPS plug and 1 2" buttress plug with 3/4" NPT reducer. 15-gal. drums have 1 2" NPS plug and 1 3/4" NPS plug and molded swing handle. • Natural, blue or black • High-density polyethylene • FDA and USDA compliant (except black) • Sold individually

UN 1H1/Y1.9/150

30 gal. UN 1H1/Y1.9/100

Prices per each

Style

Capacity

KTHP15N KTHP15BL KTHP30N KTHP30BL KTHP55N KTHP55 KTHP55BLK

15 gal. 15 gal. 30 gal. 30 gal. 55 gal. 55 gal. 55 gal.

Size (O.D.)

15 gal.

Color

Weight

1

141/2" Dia. x 261/4"H Natural 9 lbs. $40.21 141/2" Dia. x 261/4"H Blue 9 lbs. $40.21 19" Dia. x 341/4"H Natural 18 lbs. $77.67 19" Dia. x 341/4"H Blue 18 lbs. $77.67 231/2" Dia. x 353/4"H Natural 25 lbs. $88.51 231/2" Dia. x 353/4"H Blue 25 lbs. $88.51 231/2" Dia. x 353/4"H Black 25 lbs. $88.51

5

10

$36.60 $36.60 $74.39 $74.39 $83.96 $83.96 $83.96

$33.58 $33.58 $72.01 $72.01 $81.47 $81.47 $81.47

1H1/Y2.0/150

oPen head PlasTic drums Molded, plastic 55-gal. drums feature molded-in color that won't fade or peel. The blue HDPE, straight-sided drums have molded-in rolling hoops. Supplied with lever-lock ring and choice of plain cover or cover with 2 2" NPS plugs. • • • •

High-density, impact-resistant polyethylene UN tested for PG I, II and III hazardous solids FDA and USDA compliant Sold individually

55 gal. UN 1H2/Y250/S

Prices per each

Style

KOHS55LF KOHS55LP

Description

Weight

2" NPS Plugs Cover Plain Cover

24 lbs. 24 lbs.

1

$146.02 $142.27

TighT head Pails Containers are designed for the secure, dependable shipment and storage of liquid products. These pails are cylindrical in shape with spout placement in line with the sidewall for easy dispensing. The 70mm wrench that is required to apply cap when closing bottle is sold separately below. • Self-supporting, high-density polyethylene • Swing handle • 70mm Rieke screw cap

• Meets UN Performance requirements • Passed hydrostatic pressure test to 100 kPa • Sold individually

Prices per each

Style

KH5000R KH6000R KTAW397

Capacity

Size

Weight

5 gal. 6 gal.

115/8" Dia. x 143/4"H 113/4" Dia. x 171/4"H 70mm Wrench

3.5 lbs. 4.5 lbs. 3 lbs.

1

10

$12.84 $11.77 $13.39 $12.27 $42.81 $39.75

50

2.5 gal.

Containers are ideal for shipping either non-regulated or UN regulated products, and they won't rust or corrode. The standard stock color is natural, but other colors are available.

Capacity

KH0025 KH3513 KH5018 KH5020R KH7027

2.5 gal. 13 liter 18 liter 20 liter 27 liter

Size

UN 3H1/Y1.6/150 13 liter UN 3H1/Y1.8/150

• 70mm Rieke screw cap • Sold individually

18 liter UN 3H1/Y1.8/150

Prices per each

Style

5 gal. UN 1H1/Y1.8/150

$10.86 $11.33 $38.55

TighT head Jerricans • Tough, high-density polyethylene • Packing Groups II and III liquids

6 gal. UN 1H1/Y1.8/150

Weight

91/3"L x 81/2"W x 111/3"H 2.5 lbs. 11"L x 105/8"W x 105/8"H 2 lbs. 11"L x 105/8"W x 131/2"H 4 lbs. 111/4"L x 101/3"W x 151/4"H 5 lbs. 11"L x 105/8"W x 191/8"H 6 lbs.

1

10

50

$5.39 $13.62 $14.64 $10.28 $19.30

$4.94 $12.85 $13.79 $9.42 $18.04

$4.56 $11.34 $12.20 $8.70 $16.07

20 liter UN 3H1/Y1.8/150 27 liter UN 3H1/Y1.8/150

It is the shipper’s responsibility to determine the suitability of inner and outer packagings, including any requirement for absorbent material, in accordance with modal requirements for use with contents. CONSULT ALL APPLICABLE REGULATIONS.

Call: 800-621-5808

Fax: 800-723-4327

Order: labelmaster.com

45

PA C K A G I N G

closed head PlasTic drums


2013 UN Packaging Mini Spring-Base WP 46-47 P 46-47_Standard 2/21/13 4:07 PM Page 46

PA C K A G I N G

TORQUE WRENCHES & SOCKETS

preSet torque wrencheS for round head plugS

NEW LOWER PRICING!

These color-coded wrenches fit round head steel and plastic plugs and help to comply with UN packaging requirements. The breakaway design lets users know when they've reached proper torque. This dual head design has a preset torque for 2" plugs and 3/4" plugs. Be sure to comply with the closing instructions for the container being sealed. • Available in iron or non-sparking bronze • Sold individually Prices per each

Style

Material

Torque Range

Color

Weight

KTOR209R KTOR209RSR KTOR3015R KTOR3015RSR

Iron Bronze Iron Bronze

20/9 ft.-lb. 20/9 ft.-lb. 30/15 ft.-lb. 30/15 ft.-lb.

Yellow Yellow Red Red

5 lbs. 5 lbs. 5 lbs. 5 lbs.

1

$413.03 $481.84 $413.03 $481.84

3

$401.54 $468.69 $401.54 $468.69

6

$390.06 $455.53 $390.06 $455.53

preSet torque wrencheS for hex head plugS These wrenches fit hex head steel and plastic plugs, and the dual head design has a preset torque for 2" plugs and 3/4" plugs. Factory-set wrenches "slip" slightly when preset torque is applied to drum bung. Both types have an 18" tubular steel handle with rubber grip, and they help to comply with UN packaging requirements.

NEW LOWER PRICING!

• Available in heavy-duty iron or spark-resistant bronze • Sold individually Prices per each

Style

Material

Torque Range

Color

Weight

KTOR209H KTOR209HSR KTOR3015H KTOR3015HSR KTOR4020H KTOR4020HSR

Iron Bronze Iron Bronze Iron Bronze

20/9 ft.-lb. 20/9 ft.-lb. 30/15 ft.-lb. 30/15 ft.-lb. 40/20 ft.-lb. 40/20 ft.-lb.

Yellow Yellow Red Red Blue Blue

5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs.

preSet torque wrencheS for 70MM Screw capS

1

$400.03 $477.11 $400.03 $477.11 $400.03 $477.11

3

$392.03 $467.55 $392.03 $467.55 $392.03 $467.55

6

$384.19 $458.20 $384.19 $458.20 $384.19 $458.20

Socket for 70MM Screw capS

Use these wrenches to tighten 70mm Rieke or Hedwin screw caps to their required torque. Designed to break away when adequate torque is reached, they have a 120 in./lbs. or a 70 in./lbs. torque range. Be sure to follow the closing instructions for container being sealed in order to be in compliance with UN torque requirements. Sockets sold separately. Sold individually.

This socket for Rieke and Hedwin 70mm screw caps fits 1/2" drive tools and ratchets (sold separately). Be sure to follow the closing instructions for the container being sealed in order to be in compliance with UN torque requirements. • High-strength, tool steel • Sold individually

Prices per each

Style

Description

KTOR120P For Rieke Screw Caps KTOR70P For Hedwin Screw Caps

46

Weight

1

4 lbs. 5 lbs.

$1,288.58 $623.99

3

6

$1,262.83 $1,237.56 $611.50 $599.27

Call: 800-621-5808

Prices per each

Style

Weight

1

3

6

KSOK70

2 lbs.

$391.50

$380.62

$370.34

Fax: 800-723-4327

Order: labelmaster.com


2013 UN Packaging Mini Spring-Base WP 46-47 P 46-47_Standard 2/21/13 4:07 PM Page 47

TORQUE WRENCHES & SOCKETS

PA C K A G I N G

aDjuStaBle Dial & lock torque WrencheS & aDapterS These wrenches help comply with UN packaging requirements and are accurate to ±3% over the entire torque range. Soft-feel handle and scale lens resist common chemicals. Molded storage box included. Drive adapter (sold separately) converts wrench drive to fit different drive sockets. Sold individually. Adjustable Torque Wrenches Prices per each

Style

Drive Size Torque Range Length

KTORA545 KTORA30150

5-45 ft.-lb. 30-150 ft.-lb.

/" 1/2" 38

Weight

12" 17"

1

3

6

1.25 lbs. $272.28 $266.83 $261.52 2.25 lbs. $319.73 $310.14 $300.83

Drive Adapters Prices per each

Style

KADP3812 KADP1238 KADP1234

Converts

Weight

1

3

⁄2" to 3⁄8" 3 ⁄8" to 1⁄2" 1 ⁄2" to 3⁄4"

.25 lb. .25 lb. .25 lb.

$19.83 $27.66 $35.94

$19.44 $27.11 $35.23

1

6

$19.06 $26.56 $34.51

torque WrencheS for BungS

KTORQ12

Heavy-duty wrenches help ensure that an exact level of torque is reached. Color-coded handles for easy identification of torque level. For use with round head Tri-Sure steel drum plugs.

KTORQ20 KTORQ30

• Suitable for 3/4" and 2" plugs • Available in 12-, 20-, 30-lb. torque • Sold individually Prices per each

Style

Description

KTORQ12 12-lb. Torque Wrench KTORQ20 20-lb. Torque Wrench KTORQ30 30-lb. Torque Wrench KTORQSET Set of 12-lb. & 20-lb. Torque Wrenches

Weight

1

5

2 lbs. 2 lbs. 2 lbs. 4 lbs.

$380.00 $380.00 $380.00 $687.06

$347.78 $347.78 $347.78 $654.83

KSOK75R KSOK75H

KSOK200

Spark-reSiStant Drum plug SocketS Spark-resistant bronze drum plug sockets are suitable for round and hex head style plugs, and they fit a 3/8" drive on manual ratchet or manual torque wrench. • Spark-resistant bronze • Sold individually

KSOK75H KSOK75R KSOK200

Size

/" 3/4" 2" 34

Plug Type

Weight

1

3

6

Hex Head .75 lb. $151.33 $144.64 $140.52 Round Head .5 lb. $106.77 $102.06 $99.14 Round & Hex Head 1 lb. $144.84 $138.44 $134.49

Call: 800-621-5808

Drum plug sockets are suitable for 2" and 3/4" round or hex head steel style plugs, and they fit a 1/2" drive ratchet or impact wrench. • Steel alloy construction • Sold individually

Prices per each

Style

Drum plug Socket

Fax: 800-723-4327

Prices per each

Style

Weight

1

3

6

KSOK234

2 lbs.

$194.61

$190.71

$186.90

Order: labelmaster.com

47


UN Packaging-Back Cover 2013_• 2/26/13 8:18 AM Page 44

CHANGE SERVICE REQUESTED

An American Labelmark Company 5724 N. Pulaski Road Chicago, IL 60646-6797

Presort Std. U.S. Postage PAID LabelMaster

FOR FASTER SERVICE USE THESE CODES WHEN ORDERING:

Account #

Location ID#

Key Code

Choose the UN packaging that’s right for you! Product Specifications | Test Certifications | Closure Instructions

To order now, visit: labelmaster.com/un-packaging We’re Your Battery Experts!

Battery Packaging Web App

To meet today’s increasingly mobile lifestyle, batteries are becoming more powerful. Some batteries may pose a significant risk in transportation, so requirements have been put in place to manage these risks.

Helps you choose appropriate packaging for your battery shipments!

To search now, visit: labelmaster.com/battery-packaging

ONLINE: labelmaster.com

CALL: 800-621-5808 Mon.-Fri. 7am–7pm CST E-MAIL:

sales@labelmaster.com FAX: 800-723-4327 Outside U.S. & Canada: 773-478-6054

MAIL: Labelmaster We accept:

5724 N. Pulaski Rd. Chicago, IL 60646-6797


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.