LT_2_2012_LLG_UK_OP

Labortops 2/2012

Valid until 31.08.2012

11

3

Skin protection/Cleaning/ Waste disposal

4

Safety storage cabinets

12

5

Cuvettes/Calibration standards

2

Measuring beakers/Glassware Measuring jugs/Jars Pipetting-Finnpipettes

Rotary evaporators

13

Pipetting-Electrical pipette pumps 6

Distillation/Vacuum technique

14

Recirculating coolers

7

Balances/Moisture analysers

Sampling/Sample preparation

8

Life Science-Electrophoresis

9

Stirring/Shaking

Occupational safety Safety in the laboratory

10

Consumables

15 16-17 18 19-20

Cuvettes/Calibration standards

2 For more articles see our Laboratory Catalogue from page 1057 onwards

Secondary standards for calibrating spectrophotometers With certified calibration standards it’s simply measuring with the utmost confidence. In the long run spectrophotometers will only provide correct results if they are calibrated regularly. With liquid and glass filter calibration standards from the accredited Hellma Analytics Calibration Laboratory, the traceability of calibrations carried out to references of the NIST (National Institute of Standards and Technology) is ensured.

Advantages: - Reliability and comparability of measurement results - Increase of your quality of work and regulation conformity - High process transparency - Simple compliance with quality requirements e.g. ISO 9000, GLP, GMP or the most important Pharmacopoeias (EP, DAB, USP) Check for stray light Type

Description

Wavelength nm

667.100-UV 667-UV1 667-UV12

Calibration set according to European Pharmacopoeia, contains filter UV1, UV12 Liquid filter UV1, Potassium chloride Reference filter UV12, purified water

PK

Cat. No.

198 - 385 -

1 1 1

6.228 184 9.190 981 9.190 982

266, 269 -

1 1 1

6.240 535 9.190 983 6.231 555

1

7.626 372

235 - 350 430 270 - 340 440 - 635 440 - 635 440 - 635

1 1 1 1 1 1 1

6.240 039 9.190 984 6.240 040 7.612 486 6.801 867 6.801 332 6.801 868

240 - 650 279 - 638 329 - 875

1 1 1

6.227 666 6.201 067 7.612 486

Check for spectral resolution 667.200-UV 667-UV6 667-UV9

Calibration set according to European Pharmacopoeia, contains filter UV6, UV9 Liquid filter UV6, Toluene in n-hexane Reference filter UV9, n-hexane

Check for photometric accuracy 667.305-UV 667-UV60 667-UV600 667-UV14 666-F7 666-F2 666-F3 666-F4

Calibration set according to European Pharmacopoeia, contains filter UV60, UV600, UV14 Liquid filter UV60, Potassium dichromate 60mg/l Liquid filter UV600, Potassium dichromate 600mg/l Reference filter UV14, Perchloric acid Glass filter F7, Didymium Neutral density glass filter F2, 0.25 absorbance Neutral density glass filter F3, 0.5 absorbance Neutral density glass filter F4, 1.0 absorbance

Check the wavelength accuracy 667-UV5 666-F1 666-F7

Liquid filter UV5, Holmium oxide in Perchloric acid Glass filter F1, Holmium oxide Glass filter F7, Didymium

LLG-Disposable plastic cells

ÂŽ

The new generation of cuvettes with clearly improved, photometric properties. The new optimised shape and narrow wall thickness of the cuvettes provides increased heat transfer resulting in more constant sample temperatures during photometric measuremens.

-

Glass clear polystyrene (PS), cavity sorted Applicable wavelength range 340nm to 900nm Very low variation of extinction values Excellent optical transmission range Path length 10mm Overall dimensions 12.5mm x 12.5mm x 45mm Styrofoam racks: 100 cuvettes in a styrofoam box with cover

Description

Capacity

Macro Semi-micro

ml 4.0 1.6

PK Cat. No.

100 9.406 011 100 9.406 012

L A B W A R E

Cell rack, PP Holds up to 12 cells with a 10mm light path. Rack features a hinged lid with secure clasp and a removable insert for easy cleaning. The height of the lid will accommodate the tallest of spectrophotometer cells, even those with covers or stoppers (maximum 51mm).

Stackable. Autoclavable.

Length mm 115

Width

Height

mm 121

mm 60

PK Cat. No.

1 9.406 451

3

Measuring beakers/Glassware

For more articles see our Laboratory Catalogue from page 10, 36, 75 onwards

NEW: Now w

Measuring jugs with handle, stackable, PP, blue graduations Stackable. Highly transparent. Printed blue graduations.

Food-safe (suitable for contact with foodstuff in accordance with Regulation EC No. 10/2011).

Capacity

Grad.

Dia.

Height

ml 250 500 1000 2000 3000

ml 5 10 10 20 50

mm 75 100 125 148 170

mm 115 140 167 212 242

PK Cat. No.

1 1 1 1 1

9.275 738 9.275 740 9.275 742 9.275 744 9.275 746

ith Retrace Code

9.072 334

Laboratory bottles with retrace code, Borosilicate glass 3.3.

Borosilicate glass 3.3. DIN 168 - 1. EN ISO 4796-1.

With graduations and retrace code, pouring ring, PP screw cap and ISO thread.

Batch certificate available on request.

Capacity ml 100 250 500 1000 2000

Ext. dia. mm 56 70 86 101 136

Height

Neck thread

mm 105 143 182 230 260

GL 45 45 45 45 45

PK Cat. No.

10 10 10 10 10

9.072 331 9.072 332 9.072 334 9.072 335 9.072 336

®

L A B W A R E

Measuring jugs with handle, PP, moulded blue graduations Highly transparent, with moulded blue graduations.

Food-safe (suitable for contact with foodstuff in accordance with Regulation EC No. 10/2011).

Capacity

Grad.

Dia.

Height

ml 50 100 250 500 1000 2000 3000 5000

ml 2 2 5 10 10 20 50 100

mm 40 50 70 91 116 150 170 210

mm 70 80 120 133 170 215 242 270

PK Cat. No.

1 1 1 1 1 1 1 1

9.275 772 9.275 773 9.275 748 9.275 775 9.275 776 9.275 777 9.275 778 9.275 779

LLG-Funnel, borosilicate glass With short stem. Cone angle of 60°. Standard borosilicate funnels with a high heat stability. All funnels have a cone angle of 60° and therefore offer an optimum fit for all filter sizes.

Funnel dia. mm 60 80 100

PK Cat. No.

1 9.251 201 1 9.251 202 1 9.251 203

Measuring jugs/Jars

4 For more articles see our Laboratory Catalogue from page 23, 843 onwards

2 3

1

Jars with screw cap, PC Cylindrical. Very durable. Stackable. Non-toxic. Suitable for cold storage rooms and refrigerators. Autoclavable - remove cap before autoclaving.

Graduated cylinders, PP, class B, blue graduated, tall form, hexagonal base

Capacity

1

Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain "In". Tolerances class B according to DIN 12681/ISO 6706. Exposure to temperatures above 60°C may effect accuracy.

Cleaning up to max. 60°C is recommended to preserve marks and inscriptions.

Capacity

Tolerance

Height

± ml 0.100 0.250 0.500 0.500 1.000 2.500 5.000

mm 135 160 195 240 320 380 465

ml 10 25 50 100 250 500 1000

ml 15 30 60 125 250 500

Screw cap dia. mm 38 43 53 70 70 120

Colour

transparent transparent transparent transparent transparent transparent

PK Cat. No.

1 1 1 1 1 1

9.033 181 9.033 182 9.033 183 9.033 184 9.033 185 9.033 186

PK Cat. No.

1 1 1 1 1 1 1

9.274 080 9.274 081 9.274 082 9.274 083 9.274 084 9.274 085 9.274 086

Measuring cylinders, PP, class B, moulded graduations High and low form. Highly transparent. With moulded graduations. Ring marks at the major graduation points. Tolerances of class B acc. to DIN 12681/ ISO 6706. The measuring cylinders withstand exposure to temperatures up to 80°C without permanent loss of tolerance. Food-safe (suitable for contact with foodstuff in accordance with Regulation EC No. 10/2011).

Tall form, hexagonal base Capacity

Grad.

Height

Tolerance

Dia.

ml 10 25 50 100 250 500 1000 2000

ml 0.20 0.50 1.00 1.00 2.00 5.00 10.00 20.00

mm 145 170 200 250 315 360 440 482

± ml 0.2 0.5 1.0 1.0 2.0 5.0 10.0 20.0

mm 15 22 27 33 44 58 69 97

0.50 1.00 2.00 5.00 10.00 20.00

Multi-purpose, Polystyrene jar without cap.

Please order cap separately.

PK Cat. No.

1 1 1 1 1 1 1 1

7.075 031 9.274 420 9.274 428 9.274 438 9.274 448 9.274 454 9.274 462 9.274 464

Low form 25 50 100 250 500 1000

3 122 142 163 192 218 285

Multi-purpose jars, PS

2

0.50 1.00 2.00 5.00 10.00 20.00

22 27 37 51 67 78

1 1 1 1 1 1

9.274 820 9.274 828 9.274 838 9.274 848 9.274 854 9.274 862

Capacity

Dia.

Height

ml 12.5 20.0 30.0 50.0

mm 27 27 27 41

mm 29 41 60 49

PK Cat. No.

1 1 1 1

9.402 012 9.402 020 9.402 030 9.402 050

Lids, PE for multi-purpose jars, PS For jars ml 12.5 / 20 / 30 50

PK Cat. No.

1 9.402 212 1 9.402 250

5

Pipetting-Finnpipettes

For more articles see our Laboratory Catalogue from page 893, 902 onwards

3

Complete Kits Finnpipette GLP includes everything you need for "Good Laboratory pipetting"!

- Ergonomic pipettes - Convenient pipette stands - Compatible Thermo Scientific Finntip Flex tips - Disposable reservoirs + Finntip Sample Pack - F-series pen + product brochure - Good Laboratory Pipetting Guide

1

Finnpipette F2 GLP Kit

2

-

Light and ultra comfortable pipetting Improved accuracy and precision Fully autoclavable 5 year warranty with web registration

Description

Finnpipette Novus Electronic Pipette -

Index-Finger Operation Intuitive Programming Multilingual user interface 2 year warranty with web registration

Description Finnpipette Novus GLP Kit 1 incl. 10-100/100-1000µl pipette, 2x Novus stand, 2x Finntip Flex-Rack Finnpipette Novus GLP Kit 2 incl. 100-1000/500-5000µl pipettes, 2x Novus stand, 2x Finntip Flex-Rack Finnpipette Novus GLP Kit 3 incl. 1-10/10-100/100-1000µl pipettes, 3x Novus stand, 3x Finntip Flex-Rack Finnpipette Novus GLP Kit 4 incl. 10-100µl/100-1000µl/1-10ml pipettes, 3x Novus stand, 3x Finntip Flex-Rack

Finnpipette F1 GLP Kit 1 incl. 1-10/10-100/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F1 GLP Kit 2 incl. 0.2-2/2-20/20-200/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F1 GLP Kit 3 incl. 10-100µl/100-1000µl/1-10ml pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F1 GLP Kit 4 incl. 2-20/20-200/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack

Finnpipette F2 GLP Kit 1 incl. 1-10/10-100/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F2 GLP Kit 2 incl. 0.2-2/2-20/20-200/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F2 GLP Kit 3 incl. 10-100µl/100-1000µl/1-10ml pipettes, 1x Finn pipette stand, 3x Finntip Rack Finnpipette F2 GLP Kit 4 incl. 2-20/20-200/100-1000µl pipettes, 1x Finn pipette stand, 3x Finntip Rack

1 9.282 600

1 9.282 610 1 9.282 611 1 9.282 612 1 9.282 613

9.282 511

6.051 881

6.230 775 1 9.282 601 1 9.282 602

6.053 602

9.282 516

1 9.282 603

Pipette tips Finntip 2

Antimicrobial surface Adjustable finger rest Set and forget volume adjustment 5 year warranty with web registration

Description

PK Cat. No.

PK Cat. No.

Finnpipette F1 GLP Kit -

1

3

The Thermo Scientific Finntip Flex system offers flexible, soft and sophisticated high-end tips for discerning users. Low attachment and ejection forces due to the soft tip material. The new rack does not slide on the work bench.

- High precision molding with virgin polypropylene - Smooth surface for low liquid retention - Non-slip rack with hinged cover The Thermo Scientific Finntip 5ml and 10ml is designed to prevent foaming and vortexing, this tip fits into all common sizes of laboratory vessels.

PK Cat. No.

Further volumes and pack sizes available on request.

1 9.282 605 1 9.282 606

Type

Capacity

Finntip Flex 10 Finntip Flex 200 Finntip Flex 1000 Finntip 5ml Finntip 10ml

µl 0.2-10 1-200 100-1000 1000-5000 2000-10000

1 9.282 607 1 9.282 608

Description Racks for non-sterile non-sterile non-sterile non-sterile non-sterile

10x96 10x96 10x96 5x54 5x24

PK Cat. No.

960 960 960 270 120

9.282 511 9.282 516 6.230 775 6.053 602 6.051 881

Pipetting-Electrical pipette pumps

6 For more articles see our Laboratory Catalogue from page 872 onwards

The improved perform

ance

Pipette Leak Testing Unit (PLT unit) Improved process reliability with functional validation of air-displacement pipettes.

The most frequent cause of inaccuracy in piston-operated pipettes is leakage.

This arises from damage either to the seals, pistons or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.

The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds.

- Limit values for the commercially available single and multichannel pipettes in the volume range 1µl to 10ml are pre-programmed.

- Testing with and without tips - Test results in seconds - Patent pending

2 years warranty

According to monitoring of measuring instruments, air-displacement pipettes must be checked at regular intervals and the results must be compared with the ISO 8655-2 error limits. However, a calibration certificate only reflects the results at the time of testing. The time between these calibrations is crucial, since leaks can occur at any time. Well over 80% of pipettes sent in for repair have leaks and are outside their volume tolerances, even if they do not drip.

While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected. Process reliability for the pipettes is thus significantly improved.

LLG-Electrical pipette pump plus This ergonomic pipette controller is lightweight, made from UV resistant material, features adjustable valves and is microprocessor controlled for reliability and accuracy. The powerful pump offers rapid yet sensitive aspiration and dispensing. Filling and dispensing speed is easily set using the same hand by pressing the large control button. The bright LED display will indicate which of the three modes has been selected, High, Low or Gravity Mode. The user labeling area enables customisation, instant recognition and/or task designation. Additional features include hand neutral design, concave padded triggers, a 1ml pipette adapter to increase stability of small pipettes, a long life Li-Ion battery that allows 20 hours of continuous usage, low battery indicator and two holders as standard

+++ Soft touch triggers +++ Long life, easily changeable rechargeable battery +++ Sensitive and adjustable aspiration and dispensing +++ Labeling area for identification For 1-100ml glass or plastic pipettes Uses standard 0.45µm hydrophobic filters Delivered completely with universal voltage, plug faced charger, bench stand and magnetic/fixable wall mount. 5 different coloured autoclavable nose pieces as standard included.

Description

PK Cat. No.

LLG-Electrical pipette pump plus* Membrane filter, 0.45µm, PTFE, non-sterile *Available from the middle of July

1 9.281 041 5 9.281 005

®

L A B W A R E

Items supplied: PLT unit (Pipette Leak Testing Unit) including one adapter each for testing airdisplacement pipettes with tip (mounted) and without tip, 2 plugs, 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual.

Type Pipette Leak Testing Unit

PK Cat. No. 1 4.007 886

7

Recirculating cooler

For more articles see our Laboratory Catalogue from page 742, 923 onwards

Bottle top burette Titrette® With the Titrette® bottle-top burette, you can titrate quickly and reliably with highest precision, even in close quarters, with no mains supply needed - in the lab, in production, or in the field.

- High accuracy: precise titration within the error limits of Class A for glass burettes - Smooth-running operation: for sensitive, drop-wise titration - Compact design: light and stable - Easy Handling: no switching between "fill" and "titrate" - Simple maintenance: cleaning and parts replacement right in the lab.

- Titrette® SH to determine the acid content of milk and liquid dairy according to Soxhlet-Henkel (4°SH = 1ml) Smooth operation The large, easy-grip hand wheels are conveniently easy to turn. With the optimised gear ratio, you can fill the device quickly and titrate drop-wise with great sensitivity.

Class? Like Class A! The Titrette® bottle-top burette has an innovative new measuring system which matches the Class A accuracy of glass burettes and, if needed, can offer the precision of 3 decimal places below 20ml. This is an important feature for users who need to work within the Class A error limits as with glass burettes according to DIN EN ISO 385 (e.g., pharmaceutical work) Lightweight and compact!

All components only move within the housing. The compact design and the light-weight ensure good stability. The titrating tube can be adjusted horizontally and vertically. This provides flexibility when positioning the instrument.

Items supplied: Titrette® bottle-top burette, conformity certified, performance certificate, telescoping filling tube (170mm to 330mm), recirculation tube, 2 x 1.5V batteries (AAA/UM4/LR03), 3 x PP bottle adapters (GL45/32, GL 45/S40 and GL32/NS 29/32), 2 coloured light shield inspection windows, operating manual.

Capacity Accuracy Reproducibility £ ± A% £ ± V% (max. vol.) (max. vol.)

0.07 0.025 0.06 0.020 0.07 0.025 0.06 0.020

ml 25 50 25 50

Interface

without without incl. incl.

1 1 1 1

9.271 332 9.271 333 9.271 334 9.271 335

Thermofluids Huber thermal fluids have the best possible thermodynamic and environmental characteristics. The correct selection is vitally important and is dependent on the temperature range. Consideration must be given to the safety standards to ensure reliable and safe operation and optimal results. Maximum life of the fluids is also expected.

Type

M20.235.20 M20.235.20 M40.165.10 M40.165.10 M60.115.05 M60.115.05 M90.055.03 M90.055.03

Capacity Temp. range litres °C 5 -20 to +235 10 -20 to +235 5 -40 to +165 10 -40 to +165 5 -60 to +115 10 -60 to +115 5 -90 to +55 10 -90 to +55

Compact Recirculating Cooler F250 EcoChiller

PK Cat. No.

-

Environmentally friendly operation with low energy consumption No side vents, instruments can be placed right next to other equipment All wetted parts made of stainless steel or high grade plastic Large, bright LED display Compact design and small foot print Splash-proof keypad Drain tap Easy filling

Due to its high efficiency the F250 is an economic and environmentally friendly alternative to conventional tap water cooling.

PK Cat. No.

1 1 1 1 1 1 1 1

6.306 078 6.250 420 6.250 278 6.304 378 6.201 255 6.225 263 7.615 661 6.202 172

Type

Temp. range

°C EcoChiller F250 +5 to +40

Temp. stability

Cooling capacity kW at

± °C 5.00

20/0/-10°C 0.25/0.22/0.21

PK Cat. No.

1 9.698 525

Sampling/Sample preparation

8 For more articles see our Laboratory Catalogue from page 90, 477, 548 onwards

Laboratory mixer, BagMixer® For sample preparation with easily adjustable paddle system. The BagMixer® is available in 3 sizes and blends all sample types prior to their microbial analysis. Thanks to their unique adjustable paddle system the blending chamber can be adjusted to the sample volume. Combined with the variable speed, a higher bacterial recovery rate is achieved. All BagMixer® units are fitted with a timer. Constructed in stainless steel. The fully opening door enables easy cleaning.

BagMixer® 400 P with stainless steel door.

BagMixer® 400 W and 400 CC with see through glass door.

Blender bags, BagSystem® These highly resistant bags provide increased safety. The filter bags automatically filter the sample during the blending process, withholding particles behind the filter.

The BagPage® has a full-width membrane filter.

Click & clean System (only BagMixer 400 CC): removable and autoclavable paddles.

The BagFilter® P is a non-woven lateral filter and it is sterile.

All units have a 3-year warranty and life guarantee for shock absorbers and window door.

BagLight® Package: 40 bags of 25 pieces BagFilter® and BagPage® Package: 20 bags of 25 pieces

®

®

Capacity: 50ml to 400ml Type

Length

Width

Height

mm mm 390 260 BagMixer® 400 P BagMixer® 400 W 390 260 ® BagMixer 400 CC 420 260 Scan 500 colony counter available on request.

mm 290 290 265

PK Cat. No.

1 6.204 551 1 6.224 287 1 9.570 098

Type

Description

PK Cat. No.

BagLight® 400 BagFilter® 400 P BagPage® Plus 400

1000 9.570 097 plain bag, 175mm x 300mm side filter bag, 190mm x 300mm 500 9.570 078 500 9.570 081 full-size filter bag, 190mm x 300mm

TOP price!

Sampling scoops and spoons, PS, sterile White. For disposable use. Individually packed.

Type

Capacity

ml Scoop 60 Scoop 125 Scoop 250 Spoon 1.23 Spoon 2.46 Spoon 4.93 Spoon 14.79 Other sampling devices are available on request.

PK Cat. No.

Sample spoon, PP White PP. Length 180mm. Autoclavable at 121°C.

1 1 1 1 1 1 1

9.150 461 9.150 462 9.150 463 9.150 639 9.150 640 9.150 641 9.150 642

Capacity ml 1.23 2.46 4.93 14.79

Width mm 20 25 30 39

PK Cat. No.

1 1 1 1

9.150 643 9.150 644 9.150 645 9.150 646

9

Occupational safety

For more articles see our Laboratory Catalogue from page 168, 179, 211 onwards

9.005 753

Half Masks silv-Air classic -

LLG-Working and chemical protective apron Guttasyn®, PVC/PE

9.005 761

highest safety (certified according EN149) anatomical design and soft material-edges avoid bruising to the face compatible with safety spectacles because of the safe optimised nose-area seamless, continuous headband for comfortable and secure mask fit innovative shape-optimised design - completely metal free

Respiratory half-mask FFP1 - protection against contaminates up to 4 x OEL - easy to differentiate by colour coding (blue - FFP1)

Made from PVC with reverse side made of PE. Material thickness: 0.5mm.

Side and neck ribbons made of woven plastic fabric and securely attached to the apron with welded PVC eyelets. Easy to clean, hygienic and dirt-repellent PVC surface. Liquids will not be absorbed but drain off the surface.

Machine wash at 60°C. Colour: white. Acc. to 89/686/EWG (Cat. III), EN 467 and EN 14605:2005.

Width mm 80 80 100

Respiratory half-mask FFP2 - protection against contaminates up to 10 x OEL - easy to differentiate by colour coding (orange - FFP2)

Length mm 100 120 120

PK Cat. No. 1 9.414 415 1 9.414 417 1 9.414 419

®

L A B W A R E

Respiratory half-mask FFP 3 - protection against contaminates up to 30 x OEL - easy to differentiate by colour coding (black - FFP3) - circulatory venting via the soft edges prevents fogging of safety spectacles

Type

Description

silv-Air 2220 FFP2 with exhale valve and charcoal filter FFP1 FFP1 with exhale valve FFP2 FFP2 with exhale valve FFP3 with exhale valve

silv-Air 2100 silv-Air 2110 silv-Air 2200 silv-Air 2210 silv-Air 2310

Colour

PK Cat. No.

silver

15 9.005 754

white white white white white

20 15 20 15 15

9.005 750 9.005 751 9.005 752 9.005 753 9.005 755

Foldable shape with V-shape-seam for perfect adaption to the facial structure Type

Description

Colour

PK Cat. No.

FFP 1 FFP 1 with exhalation valve FFP 2 FFP 2 with exhalation valve FFP 2 with exhalation valve and charcoal filter silv-Air 3310 FFP 3 with exhalation valve

white white white white silver

30 15 30 15 15

white

15 9.005 761

silv-Air 3100 silv-Air 3110 silv-Air 3200 silv-Air 3210 silv-Air 3220

9.005 756 9.005 757 9.005 758 9.005 759 9.005 760

LLG-Safety eyeshields, black/orange -

CE approved to EN166 and EN170 Model with sporty and colourful line High wearability Moulding nose bridge and temples for maximum comfort Hypo-allergenic rubber eyebrow protection Temple adjustable in length Weight: 30g Frame colour: black/orange Lense: clear Anti-scratch and anti-fog Protection against UV400

Colour

Lens

black/orange

clear, anti-scratch and anti-fog lens, UV protection

PK Cat. No.

1 9.006 003

Safety in the laboratory

10 For more articles see our Laboratory Catalogue from page 68, 162 onwards

®

L A B W A R E

LLG-Surface protector DescProtect

-CAP With VENT

DescProtect is a durable paper which quickly absorbs liquid spills.

The PE-coated base layer stops liquids reaching the work surface.

VITsafe™ safety wash bottles, PP/PE-LD PP or PE-LD printed with safety information in accordance with regulation (EC) No. 1272/2008 (GHS) and Vent-Cap screw cap.

Dispensing tube with PP tip to optimise the backflow of the medium.

The lack of a spray insert and the smooth moulding of the inner tube surface make it possible to avoid almost all turbulence in the liquid. Permanent printed labelling information stating the statutory information required in accordance with GHS, as well as all important information: quadrilingual chemical name in German, English, French and Spanish, chemical formula, CAS number, hazard pictogram, signal word, hazard statements - H-phrases, precautionary statements - P-phrases plus NFPA code.

PP bottles are autoclavable (at 121°C for 20mins.)

-

stays flat, does not ripple or curl to de-stabilise vessels white surface can be written on using pens or pencils rapid absorption of liquid spills excellent fluid protection no contamination of work surfaces or laboratory cabinets suitable for school laboratories, wet chemistry, industry

Type

Size

PK Cat. No.

Sheets Spool

460mm x 570mm 400mm x 50m

50 9.160 270 1 9.160 271

Wide-mouth Label

Capacity

Acetone Acetone Acetone Distilled water Distilled Water Distilled water Ethanol Ethanol Ethanol Isopropanol Methylethylketone (MEK)

ml 250 500 1000 250 500 1000 250 500 1000 500 500

Neck thread GL 45 45 63 45 45 63 45 45 63 45 45

Material

PP PP PP PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PP

PK Cat. No.

1 1 1 1 1 1 1 1 1 1 1

9.223 375 9.223 381 9.223 390 9.223 370 9.223 376 9.223 385 9.223 374 9.223 380 9.223 389 9.223 378 9.223 384

Narrow neck Label

Capacity

Acetone Acetone Acetone Distilled water Distilled water Distilled water Ethanol Ethanol Ethanol Isopropanol Methanol Methylethylketone (MEK)

ml 250 500 1000 250 500 1000 250 500 1000 500 500 500

Neck thread GL 25 25 32 25 25 32 25 25 32 25 25 25

Material

PP PP PP PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PP

PK Cat. No.

1 1 1 1 1 1 1 1 1 1 1 1

9.223 345 9.223 351 9.223 360 9.223 340 9.223 346 9.223 355 9.223 344 9.223 350 9.223 359 9.223 348 9.223 347 9.223 354

Lab Soakers Standard VERSI-DRY®, 750ml/m² Paper with PE backing. Absorbs 750ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy.

Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Use as a tray, drawer or shelf liner or to wipe up spills.

Type

Description

62050 62050 62050 62050 62050

Dispenser Roll Roll Dispenser Roll Roll Mat

Size cm 51 x 9150 51 x 9150 51 x 3050 51 x 4600 51 x 46

PK Cat. No.

1 1 4 2 350

9.413 300 9.413 301 6.229 628 6.227 868 6.802 397

11

Skin protection/Cleaning/Waste disposal

For more articles see our Laboratory Catalogue from page 137, 208, 220 onwards

1

3

2

®

L A B W A R E

Lindesa O skin protection cream with beeswax ®

LLG-Disposal bags, PP 1

Moderately greasy. Particularly suitable for protecting the skin against organic solvents, varnishes, oils, petroleum spirit, resins, dyes, paints etc. as well as for after-work care for dry skin.

Capacity ml 100

PK Cat. No.

1 9.191 148

Lindesa® K skin protection cream with beeswax and camomile

2

Constructed from very strong PP film with a broad seam at the bottom.

For the disposal of contaminated labware.

When autoclaving, the neck of the bag must be left open.

Film thickness: 50µm.

Size

autoDescription clavable at

200 x 300 300 x 500 400 x 780 500 x 780 600 x 800 600 x 780 700 x 1100 700 x 1100 200 x 300 300 x 500 400 x 780 600 x 800 700 x 1100

134 °C 134 °C 134 °C 134 °C 134 °C 134 °C 134 °C 134 °C 121 °C 121 °C 121 °C 121 °C 121 °C

Dispenser box of 100 bags* Box of 500 bags* Box of 250 bags* Box of 250 bags* Box of 100 bags* Box of 250 bags* Box of 250 bags* Box of 75 bags* Dispenser box of 100 bags** Box of 500 bags** Box of 500 bags** Box of 500 bags** Box of 350 bags**

PK Cat. No.

100 500 250 250 100 250 250 75 100 500 500 500 350

9.404 099 9.404 220 9.404 221 9.404 222 9.404 103 9.404 223 9.404 224 9.404 105 9.404 020 9.404 100 9.404 101 9.404 102 9.404 104

*standard **highly transparent

Quickly absorbed. The cream strengthens the defensive functions of the skin, preventing skin damage from external pollution and soothes irritation.

Smooths and cleans without leaving a residue. Using Lindesa® K avoids greasy smears on surfaces and is therefore suitable for workers involved with enamelling, electronics production, or final inspection.

Capacity ml 50

PK Cat. No.

1 9.191 149

Lindesa® skin protection cream with beeswax Non-greasy, quickly absorbed. The cream strengthens the defensive functions of the skin, preventing skin damage from external pollution and soothes irritation. Smooths and cleans without leaving a residue. Lindesa® gives the skin elasticity and suppleness through its special caring agents.

The sense of touch is not affected. For low levels of soiling it provides protection against weak acids, alkalis and organic substances.

Capacity ml 50

PK Cat. No.

1 9.191 145

3

Indicator tape for steam, hot air and gas sterilisation Crepe paper, adhesive. With heat-sensitive dyes.

Colour changes according to DIN EN ISO 11140-1.

Rolls of 50M. With

Steam indicator Hot air indicator

Width Figure mm 19 a 19 b

PK Cat. No.

1 9.140 784 1 6.240 223

Safety storage cabinets

12 For more articles see our Laboratory Catalogue from page 244 onwards

Fire resistant safety storage cabinets VBF.195.60/VBF.195.120 Construction: - Extremely robust construction - Maximum torsional rigidity - Scratch-resistant structured paint finish - Manipulation-proof lock with locking state indicator; integration in locking system possible Doors: - The wing doors stop in any position to simplify putting in and taking out of storage - In case of fire the integrated thermal release guarantees automatic closing of the doors Base: - Permanently integrated, drive-under base - Simple transport of the cabinet without pallet - The optionally available base panel seals the base when not in use Equipment: - Various options for individually equipping the cabinet - With the optionally available Q-mover (Cat. No. 9.840 670), even 900mm and 1200mm wide cabinets can be pushed comfortably through doors in an upright position

9.840 616

9.840 650

Accessories for Safety storage cabinets VBF.195.60/VBF.195.120 Description

Shelf for VBF.195.60 Shelf for VBF.195.120 Recirculating air filter system Ventilation system

Dimensions PK Cat. No. (W x D x H) mm 443 x 435 x 30 1 9.840 514 1043 x 435 x 30 1 9.840 532 1 9.840 650 1 9.840 616

9.840 680

Chemical storage cabinets CS-Classic 9.840 667

7.628 659

60cm wid th = space in t More he lab

Fire resistant safety storage cabinets VBF.195.60 Specifications External dimensions (WxDxH): Internal dimensions (WxDxH): Weight: Max. Loading: Door colour: Door handle: Description 3 shelves, perforated insert, bottom collection sump

600mm x 615mm x 1955mm 450mm x 522mm x 1645mm 265kg 600kg warning yellow, RAL 1004 left PK Cat. No. 1 9.840 667

Fire resistant safety storage cabinets VBF.195.120 Specifications External dimensions (WxDxH): Internal dimensions (WxDxH): Weight: Max. Loading: Door colour: Description 3 shelves, perforated insert, bottom collection sump

1200 x 615 x 1955mm 1050 x 522 x 1645mm 424kg 600kg warning yellow, RAL 1004 PK Cat. No. 1 7.628 659

Safe and regulation-compliant storage of non-flammable chemicals and poisons in workrooms 3 cabinet widths, 2 different cabinet heights, 3 door variants, 7 different door colours and countless interior fitting variants are available. Please contact us.

-

high-grade steel plate body with sturdy, high-quality structured paint finish 7 different door colours at no extra cost doors with safety cylinder integrated into the turning handle prepared for connection (NW 75) to an extraction system on the cabinet’s ceiling integrated adjustable feet, easy to align natural ventilation thanks to vent openings in the floor region optionally galvanised or painted shelves (RAL 7035 light grey), height adjustable (grid size 25mm) watertight, zinc plated bottom collecting sump, optionally included according to STAWA-R pull-out drawers with plastic sump

Specifications Type CS.110.105-A External dimensions (WxDxH): Weight: Max. Loading (each shelf): Design: Interior: Door colour: Type CS.110.105-A

1055mm x 520mm x 1105mm 42kg 100kg wing doors with windows 2 zinc-plated shelves, perforated insert, zinc-plated bottom collection sump red, RAL 3020 PK Cat. No. 1 9.840 680

13

Rotary evaporators

For more articles see our Laboratory Catalogue from page 598 onwards

6.232 855

6.234 885

6.233 581

Rotary evaporator With the new RV 10 range of rotary evaporators, IKA® has confirmed that there is always room for improvement, even when it comes to one of the oldest chemical processes: distillation. The RV 10 Rotary Evaporators set new standards for safety, efficiency and ease of use.

RV 10 basic standard package includes: - Drive - Heating bath - Vertical glassware, coated and uncoated (1L receiving and distilling flask) - Vapor tube NS 29/32 - Vacuum seal - Woulff bottle Rotary evaporator RV 10 basic - Water/oil heating bath with integrated carrying handles for safe handling - Analog heating bath with adjustable safety circuit, "stand alone" operation is possible, pivoting safety hood as an accessory - Motorized lift (stroke 140mm) with "safety stop" function, if the power cuts out the evaporator flask is automatically lifted out of the heating bath - Adjustable end position recognition to protect the glass from breaking - Speed range from 20rpm to 280rpm. Digital speed display - Rotates clockwise and counterclockwise in interval operation for the drying process - Timer function for time lapse control - Heats up quickly because of optimised bath volumes - Push-off mechanism to loosen tightly fitting flasks - Suitable for DIN EN 12697-3 (Asphalt test for hot asphalt) - 5 year warranty after registration Rotary evaporator RV 10 digital V Same properties as RV 10 basic, with the following additional functions: - Digital water/oil heating bath with integrated carrying handles, ”stand alone“ operation is possible - Temperature control of the heating bath by a micro controller - Infrared interface for data transfer from the heating bath to the drive unit - RS 232 interface for PC remote operation with labworldsoft® (Cat. No. 9.910 320 - please order separately) Rotary evaporator RV 10 contol Same properties as RV 10 digital, with the following additional functions: - Integrated vacuum controller with central display for automatic distilling and ramp programming - Integrated solvent library, which can be extended by the user - Programmable volume controlled distillation - Colour graphic display for safe and comfortable operation - Automatic ventilation at the end of each test - Integrated cooling water monitoring - USB interface - New: Now RV 10.4002 Magnetic valve included in delivery

Type

Description

RV 10 basic V RV 10 basic V-C RV 10.70 RV 10.8001 RV 10 digital V RV 10 contol V

with heating bath HB 10 basic and vertical glassware, RV 10.1 with heating bath HB 10 basic and vertical glassware, coated RV 10.10 Vapor tube made of borosilicate glass, NS 29/32 Lip-seal from a PTFE compound with a built-in stainless steel spring with heating bath HB 10 digital and vertical glassware RV 10.1 with heating bath HB 10 control, vertical glassware RV 10.1 and RV 10.4002 Magnetic valve laboratory vacuum

PK Cat. No. 1 1 1 1 1 1

6.232 855 6.234 546 6.237 535 4.008 136 6.233 581 6.234 885

Distillation/Vacuum technique

14 For more articles see our Laboratory Catalogue from page 564, 587, 993 onwards

Clipox® NS Clips For conical joints, can also be used to secure flasks with ground joints & glass stoppers

Round bottom flasks, borosilicate glass 3.3 - manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

- meets the highest quality standards according to DIN EN ISO 4797.

- reinforced rims are used to prevent breaking during washing and transportation.

Capacity

NS

ml 50 50 100 100 250 500 1000 2000 50 50 100 100 250 250 500 1000

14/23 29/32 14/23 29/32 29/32 29/32 24/29 29/32 19/26 24/29 19/26 24/29 19/26 24/29 24/29 29/32

Height approx. mm 105 105 115 115 145 175 210 260 100 100 110 110 140 140 170 200

Neck diam. approx. mm 22 34 22 34 34 34 42 34 22 30 22 30 22 30 30 42

Flask PK Cat. No. external diam. approx. mm 1 6.236 508 51 1 6.238 345 51 1 6.236 346 64 1 6.236 774 64 1 6.236 303 85 1 6.240 426 105 1 6.237 702 131 1 6.238 472 166 1 4.008 379 51 1 4.008 380 51 1 4.008 381 64 1 4.008 382 64 1 4.008 383 85 1 4.008 384 85 1 4.008 385 105 1 6.242 240 131

- increases the safety of glass vessels; the symmetric, slim and aligned design solves various application problems of common clips and clamps (can be used with retort clamps) - secure horizontal and vertical connection with security in the event of pressure overload - two-sided handles enable easy mounting and removal - spring steel wire provides long working life and firm grip - will not break or age because of outstanding thermal, chemical and acid resistance, due to stainless steel AISI 316 Ti, Cr-Ni-Mo 17-12-2 - reduced abrasion due to polished surface of material - made in Germany, with production certified according to ISO9001.

Joint size NS 10 12 14 19 24 29 34 40 45 60

PK Cat. No.

5 5 5 5 5 5 5 5 5 5

9.011 400 9.011 401 9.011 402 9.011 403 9.011 404 9.011 405 9.011 406 9.011 407 9.011 408 9.011 409

®

L A B W A R E

LLG-Vacuum measuring instrument DVR 2 Versatile vacuum gauge for vacuum measurement between atmospheric pressure and 1 mbar.

With integral, alumina ceramic, pressure transducer providing excellent corrosion resistance and long-term stability.

Specificationen Measuring range: Measurement principle: Measuring accuracy: Power supply/battery: Dimensions (WxDxH): Weight: Type

DVR 2

1080 to 1mbar (hPa), 810 to 1 Torr Capacitive; gas type-independent absolute pressure measurement < 1mbar (0.75 Torr) ±1 digit 9V Lithium battery/1.2 Ah Ultralife U9VL 115mm x 115mm x 66mm 0.40kg PK Cat. No.

1 9.882 209

15

Balances/Moisture analysers

For more articles see our Laboratory Catalogue from page 315 onwards

TOP price!

Halogen Moisture Analyser DBS 60-3

Analytical balances type ACS and ACJ Entry level analytical balance with high-quality single cell weighing system - Only ACJ: Automatic internal adjustment in the case of a change in temperature > 0.5°C or time-controlled every 4 hours - Only ACS: Adjusting program CAL, external test weights, please order separately - Large LCD display, digit height 14mm - Dosage aid: High-stability mode and other filter settings can be selected - Simple recipe weighing and documenting with a combined tare/print function. In addition, the mixing ingredients for the recipe are numbered automatically and printed out with their corresponding number and weight value - Identification number: 4 numeric positions, printed on calibration protocol - Automatic data output to the PC/printer each time the balance reaches a steady state - Option: RS 232 C Interface Single-cell advanced technology: - Fully automatic manufactured weighing cell from one piece of material - Stable temperature behaviour - Short stabilisation time: Steady weight values within approx. 3 sec under laboratory conditions - Shock proof construction - High corner load performance Specifications Readability: Reproducibility: Linearity: Overall dimensions (WxDxH): Dimensions weighing space (WxDxH): Diam. weighing plate: Permissible ambient temperature: Net weight: Type

ACS 80-4 ACS 120-4 ACS 220-4 ACS 320-4 ACJ 120-4M ACJ 220-4M ACJ 320-4M

Capacity g 80 120 220 320 120 220 320

0.1mg 0.2mg ±0.3mg 210mm x 340mm x 325mm 174mm x 162mm x 227mm 91mm 10°C/30°C approx. 6kg

Modern moisture analyser with 100 memories and graphic display - Halogen quartz glass heater 400 W - Backlit LCD display, digit height 15mm: Previous drying time, current temperature, unit for displaying the results, current moisture content in %, drying mode/Status display drying - Observation window over the sample, useful during initial adjustment - Internal memory for automatic sequence of 10 drying programs and 100 drying processes carried out - The last value measured remains on the display until it is replaced by a new measurement - Sample description for up to 99 samples, 2 digits, freely programmable, and is printed in the measuring protocol - Date and time display as standard - 10 sample plates included - Table of applications: There are many practical examples in the operating instructions Specifications Readability: 0.001g/0.01% Weighing range, max: 60g Reproducibility, weight of sample 2g: 0.15% Reproducibility, weight of sample 10g: 0.02% Temperature range: +50 to +200°C Dimensions (WxDxH): 202mm x 336mm x 157mm Type

PK Cat. No.

DBS 60-3

1 9.901 441

®

L A B W A R E

6.236 854

LLG-Aluminium weighing dish Aluminium foil, for sample handling with a flanged, crimped wall for rigidity.

Finger-tab handle can be etched for identification prior to weighing.

Made from oil-free, lightweight aluminium.

PK Cat. No.

1 1 1 1 1 1 1

9.901 430 9.901 431 9.901 432 9.901 433 9.901 434 6.253 171 6.252 832

Diam.

Height

mm mm 12 43 14 57 16 70 8 100 Article 6.236 854 is without finger-tab.

PK Cat. No.

100 100 100 50

6.238 138 6.238 139 6.238 140 6.236 854

Life Science-Electrophoresis

16 For more articles see our Laboratory Catalogue from page 1229 onwards

Horizontal gel electrophoresis The multiSUB series of Horizontal gel units offers the most versatile solution for DNA and RNA agarose gel electrophoresis currently available.

The tanks are manufactured from one piece and therefore tight for life. They are equipped with high quality platinum electrodes.

High flexibility due to various sizes of gel trays for each tank and different colour coded combs. For gel casting place gel casting dams on the geltrays.

Gel casting dams are included in delivery.

Set Gel electrophoresis tank MultiSUB Mini Duo Mini DUO is the smallest unit of the multiSUB series, designed for low to medium numbers of samples. Very economic due to small buffer volumes.

Supplied with MultiSub mini tank, 2x geltrays (7 x 7cm and 7 x 10cm), 2x 8sample combs, Loading Guides, 1 set of gel casting dams and 1 x 5g bottle of Agarose.

The MultiSUB Mini Duo-Set includes additionally: - 1 x preparative comb (304Âľl + Marker, 1.5mm thick) - 1 x combination comb (for multi channel pipettes, 1mm thick) - 1 x analytical comb (16-sample, 1mm thick) - 1 x set of gel casting dams - 10 x Gel Cutting Tips

Type Set MultiSUB Mini Duo

PK Cat. No. 1 7.656 356

Set Gel electrophoresis tank MultiSUB Choice Trio The MultiSUB Choice is a versatile tank, designed for a medium number of samples.

Very flexible due to different geltrays. Supplied with MultiSUB choice Trio tank, 3x geltrays (15 x 7cm, 15 x 10cm and 15 x 15cm), 2 x 20-sample combs (1mm), Loading Guides, 1 set of gel casting dams and 1 x 5g bottle of Agarose.

The MultiSUB Choice Trio-Set includes additionally: - 1 x set of gel casting dams - 1 x preparative comb (743Âľl + Marker, 1.5mm thick) - 1 x analytical comb (35-sample, 1mm thick) - 1 x combination comb (for multi channel pipettes, 1mm thick) - 10 x Gel Cutting Tips

Type Set MultiSUB Choice Trio

PK Cat. No. 1 7.656 357

17

Life Science-Electrophoresis

For more articles see our Laboratory Catalogue from page 1234 onwards

Vertical electrophoresis and electroblotting Cleaver Scientific offers a balanced system for vertical electrophoresis, 2-D electrophoresis and electroblotting.

The tanks are equipped with high quality non-corrisive electrodes and are available in various sizes.

Set Gel electrophoresis omniPAGE TETRAD Mini The gel electrophoresis tank OmniPAGE Mini is suitable for parallel treatment of up to 4 gels with 20 samples each. The tank is easy to handle, especially leak proof and guarantees an efficient cooling. For self-cast gels and all major types of 8 x 10cm and 10 x 10cm precast gels. Supplied with gel electrophoresis tank OmniPAGE Mini, 2 sets of glass plates (10 x 10cm)* with 1mm spacers, 2 x 1mm 12-sample combs and external casting stand.

Semi Dry Blotters The Cleaver Semi Dry Blotters can be used for all types of blotting: western, southern and northern via uncomplicated buffer and set up procedures and are compatible with gel thicknesses from 0.25mm up to 10mm. They utilise a screw down lid, which secures the blot sandwich and allows complete control of pressure ensuring even transfer. The electrodes, comprising platinum coated anode and stainless steel cathode, will exhibit practically no corrosion and so provide many years of trouble free use.

Specifications Unit dimensions (W x L x H): Max. sample capacity:

The omniPAGE Mini-Set includes additionally: - 1 x 12-sample comb - 2 sets of glass plates (10 x 10cm) with 1mm spacers (1mm).

Gel casting and running at the same time.

The unit can be upgraded with wet blotting modules.

Buffer volume:

Type

Type

Description

SD10 SD20

Semi Dry Mini, 10cm x 10cm System Semi Dry Maxi, 20cm x 20cm System

PK Cat. No.

Set omniPAGE TETRAD Mini 1 7.930 246 *The gel electrophoresis tank omniPAGE Mini is compatible with glass plates of other suppliers.

PK Cat. No.

Agarose for gel electrophoresis AG agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments.

Type CSL-AG100 CSL-AG500 CSL-AG1000

Capacity g 100 500 2 x 500

Mini/Maxi 16 x 16 x 7cm/26 x 26 x 7cm 1 blot, 10 x 10cm/1 blot, 20 x 20cm; 4 blots, 10 x 10cm 5ml/20ml

PK Cat. No. 1 9.584 695 1 9.584 696 1 9.584 697

1 9.584 753 1 6.229 381

Stirring/Shaking

18 For more articles see our Laboratory Catalogue from page 395, 415, 466 onwards

®

L A B W A R E

Package overhead stirrer RW 20 digital Technical improvements on the trusted RW 20 series design. Robust, slimline and ergonomic design. With digital display, constant power-drive and hollowshafted chuck for rotor shaft height adjustment (only when stationary). incl. R 1826 Plate stand incl. R 1342 Propeller stirrer incl. R 182 Boss head clamp Specifications Max. stirring volume (H2O): Viscosity range: Motor rating input/output: Output max. at stirring shaft: Speed range I (at 50 Hz): Speed range II (at 50 Hz): Dimensions (WxDxH): Weight: Supply requirements: Max. stirring shaft torque (at 100rpm.): Protection class (DIN EN 60529): Type

RW 20 digital RW 20 digital UK RW 20 digital CH

20L up to 10000mPas 70/35W 26W 60rpm to 500rpm.

240rpm to 2000rpm.

88 x 212 x 294mm 3.1kg 230V 50/60 Hz 150Ncm IP 20 PK Cat. No.

Dedicated shaker for two or four microtitre plates. Orbital movement.

Electronic speed regulation. Acoustic signal at end of timed period.

With attachment but without plates.

Type

MTS 2/4 digital

Safety magnetic stirrer with heating, suitable for unsupervised operation -

integrated temperature control exact temperature and speed setting via digital display, even when switched off digital display of set safety temperature limit hot top indicator, hot surface warning to prevent burns, digital error code display DIN 12878 connector for attaching a contact thermometer, e.g. ETS-D5 or PT 1000; enables precise temperature control directly in the heated medium enhanced safety due to improved heat control technology highly polished, aluminium hotplate for optimal heat transfer improved magnetic coupling supplied with housing protection cover H 98

1 6.231 401 1 6.253 860 1 6.253 861

Microtitre shaker MTS 2/4 digital

Specifications Motor rating input/output: Orbit: Capacity: Speed range: Speed range: Timer (digital): Dimensions (WxDxH): Weight: Housing IP rating to DIN EN 60529: Supply requirements: Tested to DIN EN IEC 61010-1.

LLG-RCT standard safety control, incl. PT 1000

35/13.2W 3mm two or four microtitre plates 0rpm to 1100rpm Analogue scale 1 to 99 min/ continuous 185mm x 320mm x 105mm 2.7kg IP 21 230V 50/60Hz PK Cat. No.

1 9.838 195

Specifications Stirring quantity (H2O): Motor rating input/output: Speed display: Speed range: Max. magnetic bar (L x diam.): Heating function Speed display: Heat output: Heating rate (1 litre H2O in H 15): Temperature range: Setting accuracy: Temp. variation without temp. sensor: Adjustable safety circuit: Control accuracy with sensor: Heating plate Material: Dimensions: General data Dimensions (WxDxH): Weight: Protection class acc. to DIN EN 60529:

Type

RCT Standard safety control incl. PT 1000

20L 16/9W digital 50rpm to 1500rpm 80 x 10mm digital 600W 6.5K/min RT to 310°C ±1K ±2K 50 to 360°C PT 1000/±1K aluminium alloy 135mm diam.

160 x 270 x 85mm 2.5kg IP42

PK Cat. No.

1 9.720 250

Accessories: Electronic contact thermometer ETS-D5, Ikaflon® stirring bars, Trika® stirring bars, RS 1 stirring bar set, RSE Stirring bar remover

19

Consumables

For more articles see our Laboratory Catalogue from page 137, 161, 214, 716 onwards

®

L A B W A R E

Aluminium containers, round Capacity ml 28 110 110 125 280

Top diam. mm 64 80 99 96 114

Bottom diam. mm 51 56 70 78 58

Fill height mm 13 34 25 24 50

PK Cat. No.

100 100 100 100 50

9.106 240 9.106 241 9.106 242 9.106 261 9.106 263

LLG-Labels with "biohazard" symbol Self-adhesive. Ø 9.5mm. Printing protected. For labeling of 0.5ml to 2.0ml microtubes that contains potentially hazardous substances. The labels have excellent heat resistance, chemical resistance and UV resistance and a very good adhesion to various materials, even on rough or non-polar surfaces such as on plastics with low surface energy.

The material is UL certified. (File MH26760).

1000 labels per roll, in dispensing box.

Description "biohazard" symbol

PK Cat. No. 1000 9.105 740

Set Adhesive tape dispenser Write-On™ Economy Provides a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform. Plastic cutting edge is moulded into the housing. Various widths and colours of tape rolls can be mixed together on the spindles, which accommodates 5 or more 12mm to 19mm narrow rolls or 4 x 25mm wide rolls. Spindles are easily removed from the unit for loading and unloading and can be adjusted to hold either 25mm or 75mm core diameter rolls.

- Includes three plastic separating discs to assure smooth, snag free dispensing for up to four rolls of tape (additional discs on request).

- Moulded-in pen holder wells on the dispenser help to keep writing instruments handy - Ideal for use with the full line of Write-On™ Tapes, which are available in 6 colors and 3 widths (Laboratory Catalogue page 138).

- Includes mounting holes for secure attachment to a benchtop (screws not included). Can also be attached to vertical surfaces using Wall Mount Adapter Dimensions (WxDxH): 302mm x 143mm x 12mm Items supplied: Adhesive tape dispenser incl. 1 roll each of 19mm white, red, yellow, green, blue and orange Write-On™ Labeling Tape

Type Write-On™ Economy Set

PK Cat. No. 1 9.040 399

Floating racks PrepSafe™ for microcentrifuge tubes, PP Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes in place and caps closed when under pressure, floating or submerged. Use in water baths, ice baths or on the benchtop - Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations - Raised handle for easy lifting without agitating samples; stable feet keep racks upright on the bench - 95mm outer diameter fits most 1000ml beakers - With removable vortexing attachment, this allows samples to be vortexed simultaneously - Polypropylene construction. Steam autoclavable at 121°C (250°F)

Colour Natural Turquoise Pink Neon Yellow

PK Cat. No. 1 1 1 1

9.400 995 9.400 996 9.400 997 9.400 998

Special price

Test tube racks, PLASTIBRAND®, PP PLASTIBRAND®. PP. For all common test tube diameters. Very sturdy design.

All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths.

Large marking area (60mm x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to +90°C. Autoclavable (121°C). Choice of colours as outlined below.

Dimensions (L x W): 265mm x 126mm Array

6 x 14 6 x 14 6 x 14 6 x 14 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 4 x 10 4 x 10 4 x 10 4 x 10 4x8 4x8 4x8 4x8 3x7 3x7 3x7 3x7

For tubes dia. mm 13 13 13 13 16 16 16 16 18 18 18 18 20 20 20 20 25 25 25 25 30 30 30 30

Height Colour mm 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 88 88 88 88 88 88 88 88

White Blue Red Yellow White Blue Red Yellow White Blue Red Yellow White Blue Red Yellow White Blue Red Yellow White Blue Red Yellow

®

PK Cat. No.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.193 240 9.193 241 9.193 242 9.193 243 9.193 230 9.193 231 9.193 232 9.193 233 9.193 245 9.193 246 9.193 247 9.193 248 9.193 250 9.193 251 9.193 252 9.193 253 9.193 255 9.193 256 9.193 257 9.193 258 9.193 260 9.193 261 9.193 262 9.193 263

L A B W A R E

LLG-Test tubes Fiolax® glass Round bottom test tubes made of high quality Fiolax® glass with beaded rim.

Ext. dia. mm 8 10 12 12 14 16 16 18 20

Length Wall thickness mm mm 70 0.5 100 0.5 75 0.5 100 0.5 130 0.5 130 0.6 160 0.6 180 0.6 180 0.6

All prices exclusive VAT or other local taxes. Prices valid until 31. 08. 2012. E & OE.

PK Cat. No.

100 100 100 100 100 100 100 100 100

7.190 001 6.234 026 7.613 795 7.190 011 7.606 374 7.606 375 7.190 021 7.190 023 7.190 028