Lt 4 2013 llg uk

Labortops 4/2013

Highlights of the new Catalogue!

-"#035014 Valid until 31.12.2013

LLG-Gloves

Nitril

CAT III

Detailed description page 5

- good value - maximum dexterity - tough

Glassware

2

Centrifuges and accessories

18

Lab-Accessories

3

Ice makers

19

Occupational safety

4-5

Water baths/Thermostats

20-21

Measuring devices

6-7

Liquid handling

22-23

8-9

Spectrophotometers

Balances Stirrers/Vortexers

10-11

Shakers/Mixers

12-13

24

Pumps Vacuumpumps

24-26 26 27-28

Samplers

14

Lab-Accessories

Mills/Homogenisers

15

Block heaters

Filter papers

16

Chromatography

Jointed glassware

17

Cryogenic box Work2Store™

28 29-31 32

Laborglass

2 For more articles see our Laboratory Catalogue from page 13, 58, 59, 1137 onwards

Beakers, DURAN速, low form

9.003 301

DIN 12331. ISO 3819. With easy-to-read scale and large labelling field for easy marking, in fired-on. Highly durable white ceramic. Due to the wall thickness, it is suitable for use as a heating vessel. Glass Type I/neutral as per USP, EP and JP. With retrace code (Batch Identification, for all) except 5ml, 10ml and 25ml. Certificate available via the Internet. Autoclavable.

Capacity

Diam.

Height

PK

Cat. No.

ml mm 26 10* 34 25 42 50 50 100 150 60 250 70 400 80 90 600 100 800 105 1000 132 2000 3000 152 5000 170 10000*/** 217 * Without graduations. ** Not to DIN and ISO.

mm 35 50 60 70 80 95 110 125 135 145 185 210 270 350

1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.013 008 9.013 014 9.013 017 9.013 024 9.013 029 9.013 036 9.013 041 9.013 048 9.013 053 9.013 054 9.013 063 9.013 068 9.013 073 9.013 086

9.003 306

Draining Rack, ABS Laboratory space is always in high demand. Scienceware速 Lab-Aire速 II Drying Racks are practical solution for drying and storing fragile, frequently used labware. Benchtop Dryers lets you place your dryer wherever it will be most convenient and a sturdy base provides excellent balance and support.

Wallmount dryers keep labware off the bench and out of the way as it dries.

Easily installs on walls or standard pegboard using molded-in tabs with key hole openings. Hardware not included.

- Rugged ABS plastic will never corrode and easily wipes clean - Drip/storage trays have scalloped wells to hold long thin labware - 3 different sizes of pegs can be moved and repositioned to hold a variety of labware including beakers, flasks, bottles, test tubes and cylinders - With drain - Wallmount possible (9.003 301, 9.003 303.9.003 304) Rods Rods 76 mm 310 mm

Rods Width Height Depth 127 mm

Quantity Quantity 6 7 12 14 18 21 12 14 18 21

Quantity 6 12 18 12 18

mm 375 375 375 375 375

mm 240 390 594 417 570

mm 127 178 127 127 178

PK

Cat. No.

1 1 1 1 1

9.003 301 9.003 302 9.003 303 9.003 304 9.003 306

速

9.072 334 L A B W A R E

Laboratory bottles Borosilicate glass 3.3, GL 45, with retrace code Borosilicate glass 3.3. DIN 168 - 1. EN ISO 4796-1.

With graduations and retrace code, pouring ring, PP screw cap and ISO thread.

LLG Safety Nets LLG safety nets from polyethylene for covering glass containers. Cut to size with scissors. Package contains 5m.

Capacity ml 100 250 500 1000 2000 5000 10000 20000

Ext. diam. mm 56 70 86 101 136 186 234 299

Height

PK

Cat. No.

mm 100 138 176 225 260 330 410 505

10 10 10 10 10 1 1 1

9.072 331 9.072 332 9.072 334 9.072 335 9.072 336 9.072 337 9.072 338 6.802 824

Description

Colour

For dia.

LLG Safety Nets, roll LLG Safety Nets, roll LLG Safety Nets, roll LLG Safety Nets, roll LLG Safety Nets, roll LLG Safety Nets, roll

red blue yellow green red yellow

mm 6 - 15 12 - 25 20 - 40 30 - 60 50 - 100 90 - 200

PK Cat. No.

1 1 1 1 1 1

6.258 996 6.510 849 6.050 131 6.050 132 6.050 133 6.079 513

3

Lab-Accessories

For more articles see our Laboratory Catalogue from page 42, 49, 162, 247, 872 onwards

9.070 321

Graduated cylinders, PP, with handle The large handle provides a secure grip for safer, more controlled and convenient pouring. A double scale is accurate and easy to read. The wide hexagonal base prevents tip over and rolling on the benchtop. One litre and two litre sizes.

- Steam autoclavable at 121°C Capacity

PK

ml 1000 2000

Cat. No.

1 1

9.070 322

Sample containers, PS, with metal cap, sterile Ideal for sample collection and storage. Made of virgin polystyrene. All materials are non-cytotoxic. For In Vitro use only. CE Marked in accordance with the European Directive 98/79/CE. The metal cap with inert PVC-Liner ensures leak proof seal.

7.638 738 9.274 870 Capacity

PK

ml 60 100 250

300 200 50

Cat. No.

9.070 321 9.070 322 9.070 323

®

L A B W A R E

LLG-Laboratory jack, stainless steel Length

mm 200

Width

Min. height

Max. height

Max. load

mm 200

mm 90

mm 320

kg 25

PK

1

Cat. No.

9.117 220

Biohazard disposal bags, PP Biohazard disposal bags, super strength - maximum protection against dangerous tears and leaks - Material: blended polymer - Color: red-orange - Print: standard biohazard warning symbol and precautionary procedures in four languages: English, French, German and Spanish - With pre-printed sterilization indicator patch, which darkens when bag is autoclaved - Can be autoclaved at 121°C.

®

L A B W A R E

LLG-Buckets white with lid, PP For transport, packaging and storage of foodstuffs, building materials and non-corrosive chemicals Stability guaranteed when filling up with material up to 80°C. Capacity Litres 1 2 3 5 10

PK Cat. No.

1 1 1 1 1

9.040 030 9.040 031 9.040 032 9.040 033 9.040 034

Description

Size

Biohazard, 38µm Biohazard, 38µm Biohazard, 38µm Biohazard, 38µm Biohazard, 38µm Biohazard, 50µm Biohazard, 50µm Biohazard, 50µm Biohazard, 50µm Biohazard, 50µm

360 x 480mm 480 x 580mm 640 x 890mm 790 x 970mm 970 x 1220mm 360 x 480mm 480 x 580mm 640 x 890mm 790 x 960mm 940 x 1220mm

PK

200 200 200 200 100 200 200 200 200 100

Cat. No.

6.240 465 9.404 010 6.301 637 6.253 096 9.404 011 9.404 012 9.404 013 6.253 092 6.253 093 9.404 014

Occupational safety

4 For more articles see our Laboratory Catalogue from page 86, 201, 224 onwards

®

L A B W A R E

LLG-Safety vented wash bottle, PE-LD Manufactured from LDPE and with the safety label printed on the wash bottle in accordance with regulation (EC) No. 1272/2008 (GHS). The dispensing tube is used to optimize the backflow of the medium. The lack of a spray insert and the even moulding of the internal diameter provides turbulence free operation. Permanently printed symbols on the body indicate statutory details in accordance with GHS and additional important information. The name of the chemical solution inside the bottle is printed in German, English, French and Spanish. Other information such as chemical formula, CAS number, hazard pictogram, signal word, hazard statements, other phrases and NFPA code are also printed.

Label

Capacity

PK

Cat. No.

1 1 1 1 1

9.223 504 9.223 505 9.223 506 9.223 507 9.223 508

ml acetone distilled water ethanol isopropanol methanol

500 500 500 500 500

9.005 753

Half-Masks silv-Air c - highest safety (certified according EN149) - anatomical design and soft material-edges avoid bruising to the face - compatible with safety spectacles because of the safe optimised nose-area - seamless, continuous headband for comfortable and secure mask fit - innovative shape-optimised design - completely metal free - foldable shape with V-shape-seam for perfect adaption to the facial structure

Chemical protection glove DermaShield

®

EN 374 EN 374 EN 421

Respiratory half-mask FFP1 - protection against contaminates up to 4 x OEL - easy to differentiate by colour coding (blue - FFP1) Respiratory half-mask FFP2 - protection against contaminates up to 10 x OEL - easy to differentiate by colour coding (orange - FFP2) Respiratory half-mask FFP 3 - protection against contaminates up to 30 x OEL - easy to differentiate by colour coding (black - FFP3) - circulatory venting via the soft edges prevents fogging of safety spectacles Color: white

Type

Description

PK

Made of poly-chloroprene, DermaShield® is the most technically advanced sterile glove available today. Free of latex, proteins and accelerators, it minimises both Type I and Type IV allergies associated with natural rubber.

While DermaShield® has the comfort and flexibility of natural rubber gloves, at a similarly competitive price, its neoprene composition offers better chemical resistance. And the new beaded cuff prevents the glove from rolling down, providing increased protection. DermaShield®: for optimal product and worker protection. Pack size: 1 pair.

The DermaShield® is sterile and specifically adapted to critical environments ISO 5 (Class 100 & GMP AB).

AQL 0.65 (EN374) - Ideal Application - Handling of cytostatics Cat. III

Cat. No. Size

2100 2110 2200 2210 2220 2310 3100 3110 3200 3210 3310 *silver

FFP1 FFP1 with exhale valve FFP2 FFP2 with exhale valve FFP2 with exhale valve and carbon filter* FFP3 with exhale valve FFP 1, foldable FFP 1, foldable, with exhale valve FFP 2, foldable FFP 2, foldable, with exhale valve FFP 3, foldable, with exhale valve

20 15 20 15 15 15 30 15 30 15 15

9.005 750 9.005 751 9.005 752 9.005 753 9.005 754 9.005 755 9.005 756 9.005 757 9.005 758 9.005 759 9.005 761

Gr. 6 Gr. 6 ½ Gr. 7 Gr. 7 ½ Gr. 8 Gr. 8 ½ Gr. 9

PK Cat. No.

1 1 1 1 1 1 1

9.006 306 7.635 086 7.635 087 9.006 307 7.635 088 9.006 308 7.635 089

5

Occupational safety

For more articles see our Laboratory Catalogue from page 212, 222, 256 onwards

LLG-Gloves ergo, Nitril, powder-free EN 374 EN 374

EN 420

CAT. III Disposable gloves made of nitrile with a tried and tested design for uses requiring very good tactile properties combined with high resistance.

According to EN 420. 速

L A B W A R E

Glove shape Material Colour Outside Inside Size/total length Thickness/measured in single layer

flat with rolled edge (ambidextrous) nitrile blue textured powder-free halogenated S, M, L, XL med. 240 mm 0.13 mm

- Thin - comfortable to wear - Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs - More resilience through special formulation and greater wall thickness - For single use in applications with an increased need for safety when handling chemicals - Free from phthalates/softeners and allergenic latex proteins - Easy to don and particularly skin-friendly through special finishing process - Signal colour blue - suitable for areas subject to HACCP standards Cat. III Low Chemical resistant

Size

PK

S M L XL

Cat. No.

200 200 200 180

9.006 371 9.006 372 9.006 373 9.006 374

Safety container with viewing stripe, PE-HD, with UN-approval Glove box holder, PS, anti-microbial Ideal for use in cleanroom, hospitals, and microbiological work areas.

MICROBAN速 additive prevents growth of moulds and bacteria. High impact, durable resin is resistant to harsh cleaning solutions. The versatile glove box holder can accommodate single box or adjoined together to hold multiple boxes. Modular design allows stacking horizontally. Screws and anchors provided.

Electroconductive container for a safe collection and transportation of flammable solvents and solvent waste.

The clear viewing stripe allows a permanent control of the solvent level.

Also available as set with safety funnel with ball valve.

Description Dimensions (W x D x H) mm 254 x 156 x 97

Capacity

PK Cat. No.

1 9.005 427

Canister Set Canister with funnel

litres 10 10

Thread Dimensions (W x D x H) S mm 90 195 x 400 x 195 90 195 x 630 x 195

PK

1 1

Cat. No.

6.251 593 9.042 899

Measuring devices

6 For more articles see our Laboratory Catalogue from page 309, 312, 321 onwards

Laboratory instrument inoLab® Multi 9310 IDS The Multi 9310 IDS features a new technology: No longer has the meter determining the parameter but only the sensor. Intelligent, digital IDS sensors promotes the inoLab® Multi 9310 IDS to a perfect all-rounder. The universal digital input is ready for all available laboratory IDS sensors. No matter whether pH, conductivity or dissolved oxygen, when plugged into a suitable sensor the inoLab® Multi 9310 becomes either a pH, conductivity or dissolved oxygen meter. Of course it has a modern backlit graphic display with menu-controlled user interface for easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. An integrated thermal printer (58mm width) is ready for printout of the measured data (option). Includes meter, power supply, stand and USB cable.

Specifications Display: Memory: Logger: Interface: Power supply:

backlit graphic LCD manual: 500/automatic: 5000 manual/time controlled Mini USB-B Universal power supply, 100 to 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH

Type

Description

Multi 9310 Multi 9310 Set 1 Multi 9310 Set 2 Multi 9310 Set 3 Multi 9310 Set 4 Multi 9310 Set C Multi 9310 Set K Multi 9310P* Multi 9310P Set 1* Multi 9310P Set 2* Multi 9310P Set 3* Multi 9310P Set 4* Multi 9310P Set C* Multi 9310P Set K*

PK

Single instrument Incl. SenTix® 940 Incl. SenTix® 980 Incl. TetraCon®925 Incl. FDO® 925 Incl. SenTix® 940, TetraCon® 925 Incl. SenTix® 980, FDO® 925 and TetraCon® 925 Single instrument Incl. SenTix® 940 Incl. SenTix® 980 Incl. TetraCon®925 Incl. FDO® 925 Incl. SenTix® 940, TetraCon® 925 Incl. SenTix® 980, FDO® 925 and TetraCon® 925

1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

9.920 120 9.920 121 9.920 122 9.920 123 9.920 124 9.920 125 9.920 126 9.920 127 9.920 128 9.920 129 9.920 130 9.920 131 9.920 132 9.920 133

*Meter with integrated printer

LLG-Buffer solution

LLG Electrolyte solutions, KCL

Tested and certified at 20°C. Provided with label that gives the pH value at different temperatures. Tolerance ±0.02 pH. Supplied in PE-HD containers.

Traceable to NIST (SRM). Temperature dependence data is printed on the label as well as batch numbers and expiry dates. Buffers have a 24 month shelf life from date of manufacture.

Potassium chloride electrolyte for pH electrodes - Filling solution for reference electrolyte.

Type

3mol/l, 1000ml 3mol/l, 250ml 3mol/l, (AgCl saturated.), 250ml pHvalue at 20 °C 4.00 ±0.02 7.00 ±0.02 10.00 ±0.02

Capacity

Buffer

ml 1000 1000 1000

citrate phosphate borate

PK Cat. No.

1 9.041 367 1 9.041 368 1 9.041 369

PK Cat. No.

1 9.041 370 1 9.041 371 1 9.041 372

7

Melting point and density measurement

For more articles see our Laboratory Catalogue from page 410, 1268 onwards

®

L A B W A R E

LLG-Melting point apparatus Ideal for determination of the melting point of powders and substances that do not have a clear transparent melting point.

Both models have the following properties: - Digital temperature control - Sample can be monitored through a magnifying glass with integrated light - For capillaries with 1.4mm outer diameter - Automatic fan cooling that activates to cool off the device after completion of the measurement - Text display of error messages - Keyboard covered with foil for easy cleaning - With operating instructions in German and English; brief instructions right at the device - With integrated printer for saving space (only HV2) H2 for visual, semi-automatic measurement with magnifying glass, without printer: In this model, the melting point is determined visually and then saved by pushing the "Save" key.

Density meter Densito 30PX -

Wide range of applications Easy to use: take a sample and read the final result Results within seconds displayed in the unit of your choice Choice of temperature correction coefficient before each measurement Intuitive user guidance and plain language display Clearly visible measuring cell External sample tip/external syringe connection for high viscosity samples

Supplied with: Protective case, density standards, cleaning tissues, instruction manual, flasks for cleaning solution, batteries, LabX® direct DE/RE data transfer software for data collection and manipulation.

HV2 for visual measurement with magnifying glass or automatic measurement, with printer: Either fully automatic or visual measurements, 1 sample each.

With this version, you can specify whether you want to observe the melting process through the magnifying glass or have the melting point determined automatically after the pre-set starting temperature is reached (indicated by sound signal).

The scope of delivery contains 100 melting point determination capillaries and a device protection hood. Refill pack melting point tubes for LLG-Melting point apparatus please order Cat. No. 9.208 131.

Specifications Measuring range: Resolution: Accuracy:

Heating rate at fast heating: Heating rate when measuring: Magnifying glass: Lighting: Dimensions (WxDxH): Dimensions capillaries: Weight: Power supply: Type

Description

MPM-H2 MPM-HV2

Visual measuring / magnifier Visual or automatical measuring with printer

25.0°C to 360.0°C 0.1°C ±0.5°C (+25°C to +200°C) ±0.5% of measured value °C (rem. measuring range) to 200°C, approx. 4 min to 350°C, approx. 8 min 1°C/min 10x 2 x LED 230mm x 220mm x 315mm 1.4mm x 80mm 4.5kg 115-230V, 50Hz PK Cat. No.

1 9.208 120 1 9.208 121

Specitications Density measuring range: Resolution: Accuracy: Measuring units:

Temperature: Measuring range: Resolution: Calibration: Data storage: Display: Interface:

0 to 2g/cm³ 0.0001g/cm³ Density, relative density, density temperature compensated, relative density temperature compensated, Brix %, alcohol (gravity-%, volume-%, US Proof and UK Proof), Baumé, Plato, API (scales A, B and D), %sulphuric acid (gravitypercents), user-defined units 0 to 40°C 0.1°C either in °C or °F with dry air and pure water or other density standards storage space for up to 1100 results Matrix-LCD with background lighting Infrared, protocol selectable (IrDA or RS232C)

Type

Densito 30PX Density standards (6mL), 10-piece set with certificate

PK Cat. No.

1 9.947 550 1 9.947 551

Balances

8 For more articles see our Laboratory Catalogue from page 346, 352 onwards

Balances, electronic, analytical, "Precise" ABT series Analytical and semi-microbalances which are suitable for verification.

All models have automatic calibration adjustment function by internal, motor-driven, calibration weight. It is possible to log ISO/GLP-compliant weighing or calibration data at any time via an accessory printer (not supplied) or data interface (bi-directional RS232-C).

Additionally, the balances have formulation, piece counting and percentage determination functions, as well as a flush-mounted weighing platform. All models are supplied with a modern, all-glass draught shield with sliding doors to the left, right and top.

Also available with DKD certified, calibration weight, ionizer, thermal printer, statistic printer at additional cost.

Single-cell advanced technology: - Fully automatic manufactured weighing cell from one piece of material - Stable temperature behaviour - Short stabilisation time: Steady weight values within approx. 5 sec under laboratory conditions - Shock proof construction - High corner load performance

Weighing pan, stainless steel: Weighing chamber (WxDxH): Dimensions (WxDxH): Mains adapter: Type

ABT 120-4M ABT 220-4M ABT 320-4M ABT 100-5M ABT 120-5DM ABT 220-5DM

Weighing range g 120 220 320 101 42 / 120 82 / 220

Readabilit y mg 0.1 0.1 0.1 0.01 0.01 / 0.1 0.01 / 0.1

80mm dia.

168 x 172 x 223mm 217 x 356 x 338mm 220V Reproducibili Linearity ty ± mg ± mg 0.1 0.2 0.1 0.2 0.1 0.3 0.05 0.15 0.02 / 0.1 0.05 / 0.2 0.05 / 0.1 0.1 / 0.2

Plate diam. mm 80 80 80 80 80 80

PK Cat. No.

1 1 1 1 1 1

9.900 955 9.900 956 9.900 957 6.241 274 9.900 958 9.900 959

Precision balance "Precise" Type PBS/PBJ - only PBJ: Automatic internal adjustment in case of a change in temperature or time-controlled at defined intervals - Metal housing: robust and sturdy - Large backlit, LCD display, digit height 14 mm - Dosage aid: High-stability mode and other settings can be selected - Weighing with tolerance range (checkweighting): Input of an upper/lower limit value. A visual signal assists with portion division, dispensing or grading - Totalizing of individual weighing results - Identification number: 4 numeric positions, printed on calibration protocol - Automatic data output to the PC/printer every time the balance is steady - Draft shield standard, on all models with readout d = 0.001 g, weighing space (WxDxH): 180 x 193 x 87mm 6.255 611

Single-cell advanced technology: - Fully automatic manufactured weighing cell from one piece of material - Stable temperature behaviour - Short stabilisation time: 3 sec - Shock proof construction - High corner load performance

Specifications Overall dimensions, without draft shield (WxDxH): Dimensions weighing space (WxDxH): Permissible ambient temperature: Weight: Type

7.910 128

PBS 620-3M PBS 4200-2M PBS 6200-2M PBJ 620-3M PBJ 4200-2M PBJ 6200-2M PBJ 8200-1M

Readability

Capacity

g 0.001 0.01 0.01 0.001 001 0.01 0.1

g 620 4200 6200 620 4200 6200 8200

Reproducibility ±g 0.001 0.01 0.01 0.001 0.01 0.01 0.1

Linearity ±g 0.002 0.02 0.02 0.002 0.02 0.02 0.2

209 x 322 x 78mm 180 x 193 x 87mm 10°C/30°C approx. 3kg Plate dimensions mm 108 x 105 170 x 180 170 x 180 108 x 105 170 x 180 170 x 180 170 x 180

PK Cat. No.

1 1 1 1 1 1 1

7.657 889 6.255 611 9.901 445 7.910 128 6.245 038 6.236 719 6.257 002

9

Balances

For more articles see our Laboratory Catalogue from page 352, 360, 362 onwards

Anti-vibration platform, Vibrasorb For absorbing and damping vibrations down to 16Hz. Comprises of a moulded terazzo slab supported on four vibration absorbers with non-slip feet. Suitable for isolating sensitive analytical instruments such as balances and microscopes. Will support up to 16kg.

Width mm 350 450

Depth

Height

Weight

PK

mm 350 560

mm 76 76

kg 19 39

1 1

Cat. No.

9.941 600 9.951 600

®

L A B W A R E

LLG-Aluminium weighing dish Aluminium foil, for sample handling. With a flanged, crimped wall for rigidity.

Finger-tab handle can be etched for identification prior to weighing (Not included on Cat. No. 6.236 854). Made from oil-free, lightweight aluminium.

Diam. mm 43 57 70 101

Height

PK

mm 12 14 16 8

100 100 100 50

Cat. No.

6.238 138 6.238 139 6.238 140 6.236 854

Analytical and Precision Balances Explorer® Highest performance, most technically advanced balance from OHAUS - High resolution multi-lingual colour VGA touch display with icons for simple operation - Programmable multi-functional touch-free sensors for cleanliness, speed and safety - Multiple application modes plus library for storage of personal application settings - EC Type approved versions also available (models ending with M) Application: Weighing (17 units + custom units), Parts Counting, % weighing, Animal/Dynamic Weighing, Checkweighing, Filling, Totalization, Formulation, Differential weighing, Density determination, Peak hold, Ingredient costing, Pipette adjustment, Gross/Net/Tare Weighing Display: High resolution 14.5cm (diagonal) full colour VGA touch display including QWERTY and numeric key pads plus weighing capacity indication Operation: Mains Operation Communication: Easy access communication ports (USB, RS232) plus 3rd communication port slot (Ethernet or 2nd RS232). GLP and GMP including date and time, Direct Data Transfer Construction: Metal base, ABS top housing, stainless steel pan, glass draftshield with flip-top, replaceable in-use cover Design features: 3-door draftshield with removable panels on 0.1mg and 1mg models with draftshield light. Modular display design with adjustable angle (attach to base, wall or optional tower). AutoCal automatic internal calibration.

Level assist feature with illuminated level indicator. Selectable environmental and auto-print settings. Integral weigh below hook. Protective in-use cover.

Software lock switch

Weighing Papers Type

Nitrogen free for a very smooth surface and good sample recovery Strong enough to support dense material Dimensions (D x W) mm 76 x 76 102 x 102 152 x 152

PK

500 500 500

Cat. No.

9.059 016 9.059 017 9.059 018

EX224 EX623 EX6202 EX10202 EX6201

Capacity Readability g 220 620 6200 10200 6200

0.1 mg 1 mg 0.01 g 0.01 g 0.1 g

Plate dimensions mm Ø 90 Ø 130 180 x 210 180 x 210 180 x 210

PK Cat. No.

1 1 1 1 1

9.902 371 9.902 378 9.902 384 9.902 385 9.902 387

Stirrers

10 For more articles see our Laboratory Catalogue from page 416, 418 onwards

9.720 411

Magnetic stirrers RH basic/digital Newly designed, economic magnetic stirrer with heating. High heat output of 600 watts and the steel-copper compound hot plate ensures rapid heating.

Adjustable safety temperature from 50 to 370°C.

9.730 060

Vortex-Genie®-series

- Soft-start stirring motor - Includes M 10 thread for a support rod - Strong magnetic field and wide speed range for volumes up to 15 litres

Robust and reliable shakers for speedy mixing and shaking of samples.

Multiple accessories: e.g. adapter tops for test tubes, beakers, centrifuge tubes etc. Adapter tops can be changed easily with the snap fit system.

Vortex-Genie® 2 Variable speed for precise mixing from gentle to vigorous. Broad range of attachments for most tubes, plates and other containers. Hands-Free or Touch On control.

Vortex-Genie® 2T with an integrated timer Timer function: (Touch On) 1-60 seconds, (Hands-Free) 1-60 minutes or continuous. Unit automatically stops at the end of user programmed time.

Digital Vortex-Genie 2 with digital control and display of speed and time Digital display provides accuracy, reproducibility and repeatability. Timer function: (Touch On) 1-99 seconds, (Hands-Free) 1-99 minutes or continuous.

Specially configured unit for Applied Biosystems protocol available.

Specifications Shaking movement: Speed display/Timer: Speed range: Timer Interval operation: Hands-free mode: Dimensions (L x W x H): Permissible ambient conditions: Weight: Power supply:

Type

Connector

Vortex Genie® 2 Vortex Genie® 2 Vortex Genie® 2 Vortex-Genie® 2T Digital Vortex-Genie® 2

EU UK CH EU EU

Vortex-Genie® 2/Vortex-Genie® 2T/Digital Vortex-Genie® 2 circular Scale/No/Scale/Scale/Digital/Digital 600 - 2700rpm/600 - 2700rpm/500 2850rpm -/1 to 60s/1 to 99s -/1 to 60min/1 to 99min 165 x 122 x 165mm 0 to 38°C at 95% rh 4kg 230V, 50/60Hz

RH digital only: Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as the ETS-D5. Highly accurate temperature control is possible with the sensor placed directly in the medium.

- Digital display of temperature and speed - Error code display - Easy operation with touch keypad RH basic white/RH digital white with chemically resistant hot plate.

Specifications Max. stirring quantity (H2O): Motor rating input/output: Speed range: Speed display RH basic: Speed display RH digital: Heat output: Heating rate (1l H2O): Temperature range min./max.

Setting accuracy RH digital: Adjustable safety circuit min./max.: Connection for ext. temp. sensor: Control accuracy with sensor: ETS-D5: ETS-D6: Set-up plate: Dimensions (WxDxH): Weight: Protection class acc. to DIN EN 60529: Power supply:

PK

1 1 1 1 1

Cat. No.

Type

9.730 060 6.251 939 6.235 684 6.252 823 6.242 793

RH basic RH basic white RH digital RH digital white

15l 15/2W 50 to 2000rpm scale LED 600W 6K/min 50 to 320°C ±5K 50 to 370°C DIN 12878 ±1K ±0.5K ±0.2K Stainless steel 1.4301, diam. 135mm 160 x 246 x 90mm 2kg IP 21 220-240V, 50/60Hz PK

1 1 1 1

Cat. No.

9.720 411 9.720 417 9.720 414 9.720 418

11

Stirrers

For more articles see our Laboratory Catalogue from page 447 onwards

9.816 700

9.816 703

Overhead stirrer EUROSTAR 60 digital/60 control Universally used strong laboratory stirrer for quantities up to 40l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

Overhead stirrer EUROSTAR 40 digital Universal laboratory stirrer designed for simple stirring tasks for quantities up to 25l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

EUROSTAR 40 digital: - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Specifications Stirring quantity max. (H2O): Max. viscosity: Motor rating input/output: Speed range: Max. torque at stirring shaft: Display: Chuck range: Dimensions (WxDxH): Protection class DIN EN 60529: Power supply:

Type

EUROSTAR 40 digital

25l 30000mPas 112/87W 0/30 to 2000rpm 40Ncm LED 0.5 to 10mm 86 x 208 x 248mm IP 40 230V, 50/60Hz

PK Cat. No.

1 9.816 697

EUROSTAR 60 digital: - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display EUROSTAR 60 control additionally: - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function

Specifications Stirring quantity max. (H2O): Max. viscosity: Motor rating input/output: Speed range: Max. torque at stirring shaft: Display 60 digital: Display 60 control: Chuck range: Dimensions (WxDxH) 60 digital: Dimensions (WxDxH) 60 control: Protection class DIN EN 60529: Power supply: EUROSTAR 60 control only: Temperature measurement: Temperature measuring range:

Type

EUROSTAR 60 digital EUROSTAR 60 control

40l 50000mPas 168/131W 0/30 to 2000rpm 60Ncm LED TFT 0.5 to 10mm 86 x 208 x 248mm 86 x 230 x 267mm IP 40 230V, 50/60Hz PT 1000 -10 to +350째C

PK

1 1

Cat. No.

9.816 700 9.816 703

Shakers

12 For more articles see our Laboratory Catalogue from page 496 onwards

Rocking shaker Rocker 3D digital

Rocking shaker Rocker 2D basic

Shaker with three-dimensional tumbling motion and a fixed speed for smooth mixing tasks. For homogeneous mixing in flasks, culture flasks, Petri dishes and tubes. Ideal for e.g. the cultivation of cell cultures, DNA extractions, distributing of cells and staining and destaining of cells. Even with load and voltage fluctuations the shaking speed remains constant. A fixed angle ensures reproducible test results.

Rocking shaker with fixed speed for smooth mixing tasks. For homogeneous mixing in flasks, culture flasks, Petri dishes and tubes. Even with load and voltage fluctuations the shaking speed remains constant. A fixed tilt angle ensures reproducible test results.

-

Different attachments allow a variety of applications Usable at 4 to 50째C in incubators Anti-slip rubber mat included Easy operation by foil keypad Suitable for continuous operation Timer: Countdown, adjustable from 1s to 99h 59min Counter: Display of shaking time Error code display

Specifications Type of movement: Shaking diameter Permissible shaking weight (incl. attachment): Motor rating input/output: Speed Rocker 3D digital: Speed display (Rocker 3D digital only): Dimensions (WxDxH) Rocker 3D digital: Weight: Protection class acc. to DIN EN 60529: Power supply:

tumbling 0 - 15째 (angle) 2kg 16/9W 5 to 80rpm 7 segment LED 280 x 330 x 185mm 2.2kg IP 21 100-240V, 50/60Hz

-

Different attachments allow a variety of applications Usable at 4 to 50째C in incubators Anti-slip rubber mat included Easy operation by foil keypad Suitable for continuous operation

Specifications Type of movement: Shaking diameter Permissible shaking weight (incl. attachment): Motor rating input/output: Speed: Speed display: Dimensions (WxDxH): Weight: Protection class acc. to DIN EN 60529: Power supply:

Type

Rocker 2D basic

Type

Rocker 3D digital

PK

1

Cat. No.

9.729 987

rocking 8째 (angle) 2kg 16/9W 5 to 80rpm 7 segment LED 280 x 330 x 150mm 2.2kg IP 21 100-240V, 50/60Hz

PK

1

Cat. No.

9.729 984

13

Shakers and Mixers

For more articles see our Laboratory Catalogue from page 509, 510 onwards

9.729 970

9.729 973

Tube roller Roller 6 basic/6 digital/10 basic/10 digital Roller shaker with 6 or 10 rolls, with smooth rocking and rolling action and a fixed speed. Particularly for mixing blood samples, solid and liquid suspensions and viscous samples. The unit can be used for all conventional tubes and cylindrical bottles. The easy removable rolls allow simple and quick cleaning of the unit from spilled samples.

-

Usable from 4 to 50°C in incubators Suitable for continuous operation Removable rolls make it suitable for larger tubes Easy operation by foil keypad Easy removable rolls

Holds a wide variety of tubes, flasks, microplates, and odd-shaped vessels.

Available in two interchangeable platform configurations. Magnetic platform features unique spring clip plate system. The optional Standard platform (Cat. No. 9.730 104) is designed to turn 90 degrees allowing different mixing motions. Designed for cold room and incubator use. Will easily fit in most incubators. Uniquely designed for a wide selection of motions, which can be adjusted from gentle rolling to forceful end over end mixing. Continuous-duty quality motor provides smooth, quiet operation.

Roller 6 digital/10 digital only: - Timer: Countdown, adjustable from 1s to 99h 59min - Counter: Display of shaking time - Error code display Specifications Type of movement: Shaking diameter Roller size (l x Ø): Ambient temperature: Max. humidity: Protection class: Power supply: Type

Rollers

Roller 6 basic 6 Roller 6 digital 6 Roller 10 basic 10 Roller 10 digital 10

rocking and rolling 24.5 (height) 310 x 32mm +4°C to +50°C 80% IP 21 100-240V, 50/60Hz

Dimensions (W x D x H)

Rotation speed

Load max.

mm 240 x 545 x 115 240 x 545 x 115 380 x 545 x 115 380 x 545 x 115

rpm 30 (fixed) 5 - 80 30 (fixed) 5 - 80

kg 2.0 2.0 2.0 2.0

Rotator Genie™

Specifications Speed: Environmental:

5rpm to 35rpm ATEX-Installation Category 2, 0°C to 38°C, 95% max. relative humidity 400 x 175 (290 platform horizontal) x 400mm 290 x 315mm

Overall dimensions (WxDxH): PK Cat. No.

1 1 1 1

9.729 970 9.729 971 9.729 972 9.729 973

Dimensions magnetic platform: Dimensions standard platform: Weight:

Type

Description

SI-2204 SI-2110 SI-2210 SI-1123

incl. magnetic platform, EU plug Standard platform with bands Magnetic platform 1 Clip plate for 12 tubes, 10mm to 13mm* 1 Clip plate for 6 tubes, 15mm to 17mm* 1 Clip plate for 3 tubes, 28mm to 30mm* 6 Clip plate for 12 tubes, 10mm to 13mm* 6 Clip plate for 6 tubes, 15mm to 17mm* 6 Clip plate for 3 tubes, 28mm to 30mm* 2 Universal clip plates 1 Magnetic microtube box, 100 places** 1 Clip plate for volumetric flasks, 100ml

SI-1124 SI-1125 SI-1120 SI-1121 SI-1122 SI-1134 SI-1135 SI-1136

5.2kg

Cat. No.

Type

PK

a h b

1 1 1 1

6.254 273 9.730 104 9.730 114 9.730 105

c

1

9.730 106

d

1

9.730 107

b

6

9.730 108

c

6

9.730 109

d

6

9.730 110

e f

2 1

9.730 111 9.730 112

g

1

9.730 113

*Platform capacity: 12 Clip plates, **Platform capacity: 8 boxes

Samplers

14 For more articles see our Laboratory Catalogue from page 111, 514, 519 onwards

Sampling scoops and spoons, PS, sterile

Powder spatula smartSPATULAS®, PP

White. For disposable use.

- Individually sealed and sterilized in a polyethylene bag ready for one time use and disposal - long handle increases the distance between the hand and the sample - scoop stays vertical when packed or unpacked for use as weighing boat

Single use polypropylene lab tools made to increase productivity and reduce costly contamination errors. They offer an Always there and always clean’ alternative to metal spatulas.

- Size related designs to fit perfectly with standard 0.5, 1.5/2.0, 15 and 50 mL tubes - Ideal for dispensing or sample collection of powders or soft solids - Shatter resistant in liquid nitrogen and resistant to dilute acids and bases and can be used with hot liquids - Anti-static, sterile and Eco-friendly versions available - Autoclavable and complies with FDA standards for food contact

Type

Capacity

PK Cat. No.

ml Scoop 60 Scoop 125 Scoop 250 Spoon 1.23 Spoon 2.46 Spoon 4.93 14.79 Spoon Other sampling devices are available on request.

1 1 1 1 1 1 1

9.150 461 9.150 462 9.150 463 9.150 639 9.150 640 9.150 641 9.150 642

Description

Colour For Length Diam. tubes ml mm mm Micro Antistatic Natural 0.2 14 3.5 Eco Natural 15/1.5/2.0 14 7.0 Standard Blue 15/1.5/2.0 21 7.0 Standard Natural 15/1.5/2.0 21 7.0 Standard sterile Natural 15/1.5/2.0 21 7.0 Macro Green 50 31 1.0

®

Figure

d b c a

PK Cat. No.

300 300 300 300 100 150

6.256 896 6.256 894 6.256 893 6.256 895 6.256 898 6.256 897

L A B W A R E

LLG-Measuring scoops, PE-HD For heavy industrial use. Suitable for foodstuff.

Length cm 25 30 35 40

Capacity ml 250 500 1000 1500

PK Cat. No.

Micro spoon spatulas, 18/10 steel 1 1 1 1

9.201 091 9.201 092 6.240 471 9.201 093

Excellent grade polished stainless steel with one end having a flat spatula and the other end having a micro spoon.

Length

Spoon LxW

mm 150 180

mm 9x 5 9x 5

PK Cat. No.

1 9.150 820 1 4.008 451

15

Mills - Homogenisers

For more articles see our Laboratory Catalogue from page 550, 565 onwards

9.737 790

9.737 791

Tube Mill control The world’s first patented Tube Mill control is a batch mill with disposable grinding chambers. Eliminates the possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made from a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 3), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.

-

This handheld homogenizer is ideal for quick processing of small sample quantities and volumes, for example in Life science or genetic.

Clearly arranged, multilingual OLED-display USB interface for control and documentation of all the parameters Interval operation available Various operating modes Adjustable safety speed Adjustable safety time Programmable and storable test conditions Error Code Display Reproducible test results Easy operation with touch keypad Dust proof sealed housing Quiet operation

Specifications Operating principle Motor rating input/output: Speed: Chamber vol.: Timer: Interval timer: Overload protection: Circumferential speed: Max. feed hardness: Dimensions (WxDxH): Weight: Protection class according to DIN EN 60529: Power supply:

Homogenizer, POLYTRONÂŽ PT 1200 E

Application volume: 0.05 to 250ml - Soft start prevents splashing of homogenate from sample vessel - Tip speed up to 12 m/s - Ergonomic design and various models of dispersing aggregates in Easy-to-Clean design Applications: - General homogenization applications (dispersion and emulsification) - Sample preparation for subsequent extraction of pharmaceutical agents (API) - Cell disruption, RNA/DNA isolation from tissue - Dispersion of small quantities from plants, animals or human tissue

cutting/impact 175/123W 5000 to 25000rpm 40ml 5s to 3min 5s to 60s yes 65m/s 5Mohs 180 x 300 x 170mm 2.7kg IP 30 220-240V, 50/60Hz

Specifications Application volume: Motor input power: Aggregates: Speed range: Max. viscosity: Drive Dimensions (L x W x H): Weight drive: Tested to:

Type

PK Cat. No.

Type

Tube Mill control Disposable grinding chamber MT 40

1 9.737 790 10 9.737 791

PT 1200 E, 230V (with EU-plug)

0.05 to 250ml 100W dia. 3, 5, 7 and 12mm and dia. 20mm X EC-E116 Aggregat Stepless up to 25.000min-1 6000mPas 220 x 44 x 55 mm 440g EN/IEC 61010, 61326-1

PK Cat. No.

1 9.571 492

Filter papers

16 For more articles see our Laboratory Catalogue from page 682 onwards

LLG-Glass microfibre filters, filter circles

LLG-Qualitative filter paper, circles Medium speed

Diam. mm 25 47 150 25 70 90 110

Filtration time secs.

60 60 60 100 100 100 100

PK Cat. No.

100 100 100 100 100 100 100

9.045 860 9.045 861 9.045 862 9.045 865 9.045 866 9.045 867 9.045 868

Diam.

Filtration time secs.

88 88 88 88 88 88 88 88 88 88

mm 42.5 47.0 55.0 70.0 90.0 110.0 125.0 150.0 185.0 240.0

PK Cat. No.

100 100 100 100 100 100 100 100 100 100

9.045 800 9.045 801 9.045 802 9.045 803 9.045 804 9.045 805 9.045 806 9.045 807 9.045 808 9.045 809

速

L A B W A R E

LLG-Qualitative filter paper, circles

LLG-Qualitative filter paper, circles

Medium speed

Fast

Diam. mm 42.5 90.0 110.0

Filtration time secs.

50 50 50

PK Cat. No.

100 9.045 820 100 9.045 821 100 9.045 822

Diam. mm 90 110 125 150 185

Filtration time secs.

10 10 10 10 10

PK Cat. No.

100 100 100 100 100

9.045 830 9.045 831 9.045 832 9.045 833 9.045 834

17

Laboratory glassware with standard ground glass

For more articles see our Laboratory Catalogue from page 598, 621, 633 onwards

9.141 113

Erlenmeyer flasks, NS neck, borosilicate glass 3.3 Borosilicate glass 3.3. Resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12387. NS necks are in compliance with DIN 12242 standards. Inscriptions are in white enamel which is specially designed for glass use.

Capacity

Socket

ml 50 50 50 100 100 250 300 500 1000

NS 14/23 19/26 29/32 14/23 29/32 29/32 29/32 29/32 29/32

Height

PK

mm 85 85 85 100 100 140 156 175 220

1 1 1 1 1 1 1 1 1

6.244 011

Separating funnels, conical, borosilicate glass 3.3

Cat. No.

9.141 105 9.141 106 9.141 107 9.141 108 9.141 109 9.141 110 9.141 111 9.141 112 9.141 113

Supplied with PTFE stopcock, graduated or ungraduated. According to DIN 12451. With PP conical stopper.

Capacity

NS

Description

ml 50 100 250 500 1000 2000 50 100 250 500 1000 2000

19/26 19/26 29/32 29/32 29/32 29/32 19/26 19/26 29/32 29/32 29/32 29/32

ungraduated ungraduated ungraduated ungraduated ungraduated ungraduated graduated graduated graduated graduated graduated graduated

PK Cat. No.

1 1 1 1 1 1 1 1 1 1 1 1

4.008 423 4.008 424 6.242 395 4.008 425 6.242 694 4.008 426 4.008 427 6.241 980 6.241 671 6.241 981 6.244 011 6.242 394

Separating funnels, Squibb-pattern, borosilicate glass 3.3

NS-Glass stoppers, hollow borosilicate glass 3.3

Supplied with PTFE stopcock, graduated or ungraduated. According to DIN 12452. With PP conical stopper.

Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12252. Lower closed end of stopper features a �drip-tip“ to ensure adhered liquid is returned to the flask. Hexagonal flat head prevents the stopper from rolling and allows stopper to be stood on end preventing contamination of the ground surface.

Capacity

NS

Description

Bore

ml 50 100 250 500 1000 2000 50 100 250 500 1000 2000

19/26 19/26 29/32 29/32 29/32 29/32 19/26 19/26 29/32 29/32 29/32 29/32

ungraduated ungraduated ungraduated ungraduated ungraduated ungraduated graduated graduated graduated graduated graduated graduated

mm 10.0 10.0 10.0 10.0 12.0 12.0 10.0 10.0 10.0 10.0 12.0 12.0

PK Cat. No.

1 1 1 1 1 1 1 1 1 1 1 1

4.008 422 6.241 670 6.238 526 6.238 527 6.241 669 6.241 668 6.236 317 6.236 318 6.236 319 6.236 320 6.236 321 6.240 412

NS

Description

10/19 12/21 14/23 19/26 29/32

clear clear clear clear clear

PK Cat. No.

1 1 1 1 1

7.900 483 6.242 396 9.229 990 9.229 991 9.229 992

Centrifuges and accessories

18 For more articles see our Laboratory Catalogue from page 654, 674 onwards

®

L A B W A R E

LLG-Centrifuge tubes, PP Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Cytotoxicity-free, DNase/RNase- and human DNA-free.

Centrifugation capacitiy (RCF): 6000 x g PK

Capacity

Form

Description

ml 15 15 15 50 50 50 50 50 50 50

conical conical conical conical conical conical with rim with rim with rim with rim

sterile, single packed non-sterile, 8x50 in rack non-sterile sterile, single packed non-sterile non-sterile, in rack sterile, single packed sterile non-sterile non-sterile,4x50 in rack

50 400 500 50 500 50 50 50 50 200

Cat. No.

9.316 062 4.008 507 9.316 063 9.316 064 9.316 065 9.316 066 9.316 067 6.238 728 4.008 506 4.008 508

Mini-Centrifuge Sprout® New SnapSpin™ rotors - a new approach to compact centrifuge use!

Introducing the next generation of the Sprout® mini-centrifuge loaded with new features for increased efficiency in the lab. Two new SnapSpin rotors (a six-place standard rotor and an eight-place strip rotor) snap-in and out for fast and easy changes! Plus, two sets of adapters accommodate all major microtube and PCR® tube styles (2.0, 1.5, 0.5, 0.2 mL) for customized use.

The Sprout is ideal for microfilter cell separations and HPLC samples. With most spins lasting around 20 seconds, the ergonomically designed lid is specifically designed to fit in the palm of your hand for easy repeat opening and use. Made with UV resistant plastic.

Operation is now faster and easier: Snap in rotor, load and close. For repeated spins, simply close the lid to reactivate. An internal safety switch ensures the Sprout will not operate without the lid open.

Small size offers minimal benchtop space and removable cord for compact storage.

- Low noise and vibration - Small size - Quick Spin feature for short spins.

- Numbered tube positions - Unit will not operate without lid in place Sprout includes: - Two easy change, tool-free rotors: - Six-place standard rotor for 1.5/2 mL tubes - Eight-place strip rotor for two 0.2 mL tube strips or 16 single tubes - Six 0.2 mL and six 0.5 mL adapters for customized use - Storage Case - Keeps rotors and adapters contained and dust-free - Tube Rack - Convenient for handling samples before and after quick spins

Mini Plate Spinner MPS 1000 -

quickly spin down droplets and condensation use before and after thermal cycling to increase PCR yield accepts skirted, non-skirted and all standard PCR plates less than ¼ x the size of most plate centrifuges

Specifications Centifugal force: Rotor Speed: Capacity: Rotor: Dimensions (WxDxH): Weight: Supply requirements: Type

MPS 1000

Specifications Maximum RCF: Maximum Speed: Tubes Accommodated Circular, one-size rotor: Strip rotor:

500xg 2500rpm 2 PCR Plates Fixed vertically 483 x 534 x 465mm 3kg 230V 50/60Hz

Dimensions:

PK Cat. No.

1 9.945 790

Description

Sprout®

2000xg 6000rpm six 1.5- and 2.0ml tubes or use with adapters to spin six 0.4- and 0.5ml tubes two 8 x 0.2ml PCR tube strips or 16 x individual 0.2ml PCR tubes 153 x 128 x 104mm

PK Cat. No.

1 6.254 604

19

Ice makers

For more articles see our Laboratory Catalogue from page 744 onwards

Flake ice maker with reservoir, air cooled, RF Series -

9.580 203

Vertical condenser cylinder with internal worm gear system HACCP compliant Energy-saving production Convenient door for easy access Separate power switch Ready to plug in Stainless Steel Deionized water suitable

Included: Adjustable stainless steel feet 110 to 150mm, water supply kit, drain kit, ice scoop.

Specifications Cooling: Air (A) Refrigerant: R 404 A Power supply *: 230V, 50Hz * Other voltages on request

Type

RF 0244 A RF 0266 A RF 0385 A RF 0399 A RF 0644 A

Output kg/24 hrs.

Rating

Capacity

up to kg 82 82 151 151 312

W 703 703 1026 1026 3004

kg 18 27 40 54 54

Dimensions (W x D x H)

mm 500 x 660 x 842 500 x 660 x 952 738 x 690 x 1003 738 x 690 x 1172 741 x 678 x 1167

Weight

PK

kg 71 76 102 109 117

1 1 1 1 1

Cat. No.

9.580 201 9.580 202 9.580 203 9.580 204 9.580 205

Flake ice maker without reservoir, RFS series -

HACCP compliant Robust and low-maintenance Improved energy efficiency by 5% (RFS models) Stainless steel (inside/outside) Separate power switch Air-or water-cooled Vertical condenser cylinder with internal worm gear system Deionized water suitable

9.580 211

Included: Water supply kit, drain kit, adapter kit for memory.

Specifications Cooling: Refrigerant: Power supply *: * Other voltages on request Type

RFS 0300 A RFS 0650 A RFS 1200 A RFS 2300 A

Output kg/24 hrs.

Rating

up to kg 174 322 546 1093

W 1465 3004 4103 8646

Air (A) R 404 A 230V, 50Hz Dimensions (W x D x H)

Weight

mm 559 x 600 x 660 559 x 600 x 660 760 x 600 x 696 944 x 684 x 700

kg 79 104 119 210

PK Cat. No.

1 1 1 1

9.580 211 9.580 212 9.580 213 9.580 214

9.580 214

Reservoir and adapters for RFS series Type

Description

For model

B 320 B 420 B 570 B 970 + K-00368 F 1300

Reservoir 95kg Reservoir 141kg Reservoir 195kg Reservoir 323kg includes adapter Reservoir 599kg

RFS 0300 A/W und RFS 0650 A/W RFS 0300 A/W und RFS 0650 A/W RFS 01200 A/W RFS 01200 A/W RFS 02300 A/W

PK Cat. No.

1 1 1 1 1

9.580 221 9.580 222 9.580 223 9.580 224 9.580 225

Water baths and Thermostats

20 For more articles see our Laboratory Catalogue from page 779, 798 onwards

Unstirred water baths SUB Aqua Pro series, digital High quality and excellent temperature stability, in a value-for-money package designed to meet the needs of the world`s researchers.

The SUB Aqua Pro range is composed of eight models, including shallow and dual baths.

- Three programmable temperature presets - Drain tap on SUB Aqua 12 Pro,18 Pro, 26 Pro and 34 Pro - Front panel lock-out - Countdown timer with audible buzzer - Ambient +5°C to 99°C operation - Stability ±0.2°C - Digital PID control for quick heat-up and precision control throughout the temperature range - User-settable sample protection and fixed thermal cut-out - High grade stainless steel tanks - Grant non-drip polycarbonate lid and tray included as standard - Wide range of tanks sizes and accessory options to suit different requirements Available as 120V or 230V. Type

Volume

Rating

SUB Aqua 2 Pro SUB Aqua 2s Pro SUB Aqua 5 Pro SUB Aqua 12 Pro SUB Aqua 18 Pro SUB Aqua 26 Pro SUB Aqua 34 Pro SUB Aqua Dual Pro

litres 2 2 5 12 18 26 34 5 & 12

kW 0.25 0.35 0.35 0.80 1.05 1.05 1.30 1.15

Internal dimensions (W x D x H) mm 140 x 115 x 125 290 x 300 x 145 290 x 115 x 145 290 x 115 x 315 290 x 115 x 495 290 x 165 x 495 290 x 160 x 630 290 x 115 x 145 & 290 x 115 x 315

External dimensions (W x D x H) mm 185 x 200 x 200 335 x 215 x 150 335 x 215 x 200 360 x 380 x 225 335 x 590 x 275 335 x 590 x 275 335 x 770 x 370 545 x 380 x 225

PK

1 1 1 1 1 1 1 1

Cat. No.

9.905 860 9.905 861 9.905 862 9.905 863 9.905 864 9.905 865 9.905 866 9.905 867

Cooling circulators Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/30°C to 200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the MPC models.

Type

CC®-K12 MPC®-K12 CC®-K15 MPC®-K15 CC®-K20 MPC®-K20 CC®-K25 MPC®-K25

Working Temp. range °C -20 ... +200 -20 ... +200 -20 ... +200 -20 ... +200 -30 ... +200 -30 ... +200 -30 ... +200 -30 ... +200

Cooling capacity kW at 0/-10/-20°C 0.2/0.12/0.05 0.2/0.12/0.05 0.2/0.12/0.05 0.2/0.12/0.05 0.35/0.27/0.16 0.35/0.27/0.16 0.35/0.27/0.16 0.35/0.27/0.16

Bath capacity

Bath opening

Dimensions (W x D x H)

Pump max.

L 12 12 15 15 20 20 25 25

mm 290 x 152 290 x 152 290 x 152 290 x 152 290 x 329 290 x 329 290 x 329 290 x 329

mm 350 x 560 x 430 350 x 560 x 430 350 x 560 x 430 350 x 560 x 430 350 x 555 x 615 350 x 555 x 615 350 x 555 x 615 350 x 555 x 615

L/min / bar 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2

PK Cat. No.

1 1 1 1 1 1 1 1

9.859 227 9.857 407 9.859 228 9.857 408 9.859 229 9.857 409 9.859 230 9.857 404

21

Thermostats

For more articles see our Laboratory Catalogue from page 767 onwards

Heating bath circulators Heating bath circulators are suitable for temperatures up to 200°C or 300°C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage.

The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.

Specifications Temp. control range CC®-205B/MPC®-205B: CC®-304B/CC®-308B/CC®-315B: Safety class: Stability to DIN 12876 CC®-205B/CC®-304B/CC®-308B/CC®-315B: MPC®-205B: Type

Bath capacity

L 5.0 CC®-205B ® 5.0 MPC -205B 5.0 CC®-304B 8.5 / 5.2* CC®-308B 15 / 8.5* CC®-315B *using displacement insert

Heating capacity kW 2.0 2.0 2.0 3.0 3.0 / 4.0

(-30)45 ... 200°C (-20)28 ... 300°C FL, III 0.02K 0.05K

Supply req., 50 Hz

Dimensions (W x D x H)

Suction pump cap.

V 230 230 230 230 230 / 400

mm 178 x 337 x 355 178 x 337 x 355 210 x 335 x 392 242 x 404 x 392 335 x 382 x 433

L/min bar 25 / 0.4 17 / 0.18 22 / 0.4 22 / 0.4 22 / 0.4

Pressure pump max.

L/min bar 27 / 0.7 20 / 0.2 33 / 0.7 33 / 0.7 33 / 0.7

PK

1 1 1 1 1

Cat. No.

9.859 221 6.244 121 9.859 222 9.859 223 9.859 224

Heating circulators Good things come in small packages! Thanks to their low bath volumes the models CC-104A und MPC-104A (with polycarbonate bath) as well as the CC-202C and MPC-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16x1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump.

The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the MPC models.

Models CC-202C and MPC-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and MPC-104A the cooling coil is an optional extra.

Temperature range CC®-104A/MPC®-104A: CC®-202C/MPC®-202C: Temp. Stability to DIN 12876 CC® models: MPC® models: Safety class: Bath depth: Heating capacity: Type

CC®-104A MPC®-104A CC®-202C MPC®-202C

(15)25 to 100°C (-30)45 to 200°C 0.02K 0.05K FL, III 150mm 2kW

Bath opening

Dimensions (W x D x H)

Suction pump cap.

Pressure pump max.

mm Ø 25 Ø 25 Ø 25 Ø 25

mm 147 x 235 x 330 147 x 235 x 330 178 x 260 x 355 178 x 260 x 355

L/min bar 25/0.4 17/0.18 25/0.4 17/0.18

L/min bar 27/0.7 20/0.2 27/0.7 20/0.2

PK

1 1 1 1

Cat. No.

9.859 213 7.638 719 9.859 220 6.244 120

Liquid handling

22 For more articles see our Laboratory Catalogue from page 872, 905 onwards

®

L A B W A R E

LLG-Electrical pipette pump plus This ergonomic pipette controller is lightweight, made from UV resistant material, features adjustable valves and is microprocessor controlled for reliability and accuracy. The powerful pump offers rapid yet sensitive aspiration and dispensing. Filling and dispensing speed is easily set using the same hand by pressing the large control button. The bright LED display will indicate which of the three modes has been selected, High, Low or Gravity Mode. The user labeling area enables customization, instant recognition and/or task designation. Additional features include hand neutral design, concave padded triggers, a 1ml pipette adapter to increase stability of small pipettes, a long life Li-Ion battery that allows 20 hours of continuous usage, low battery indicator and two holders as standard - For 1-100ml glass or plastic pipettes - Soft touch triggers - 5 different coloured autoclavable nose pieces as standard included - Uses standard 0.45µm hydrophobic filters - Long life, easily changeable rechargeable battery - Sensitive and adjustable aspiration and dispensing - Labeling area for identification - Delivered completely with universal voltage and plug faced charger - Comes with bench stand and magnetic/fixable wall mount

Description

LLG-Electrical pipette pump plus

LLG-Serological pipettes, PS, graduated, sterile - Graduations for accurate dispensing up to ±2% - Colour coding for easy volume identification - Pyrogen-free - Sterile, individually packed Volume

Grad.

Colour code

ml 1 2 5 10 10 25 50

ml 1/100 1/50 1/10 1/10 1/10 2/10 5/10

yellow green blue orange orange (wide mouth) red purple

PK Cat. No.

500 500 200 200 200 150 100

9.380 440 9.380 441 7.930 401 7.930 402 9.380 442 7.930 403 9.380 443

PK Cat. No.

1 9.281 041

Graduated cylinders, PMP, tall form, class A Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN’. Class A tolerances according to DIN 12681/ISO 6706.

Hexagonal base with bottom studs provides high stability.

Thermal stress up to 121ºC (autoclaving) does not cause tolerance limits to be permanently exceeded.

Safety pipette bulb Flip™ Fits virtually all pipette sizes.

Only two valve operation points.

With automatic vent valve that can be removed for cleaning.

Type

Flip™

PK Cat. No.

1 9.273 838

Capacity Accuracy

Grad.

ml 10 25 50 100 250 500 1000 2000

ml 0.20 0.50 1.00 1.00 2.00 5.00 10.00 20.00

± ml 0.10 0.25 0.50 0.50 1.00 2.50 5.00 10.00

Height Diam. mm 145 170 200 250 315 360 440 482

mm 15 22 27 33 44 58 69 97

PK

1 1 1 1 1 1 1 1

Cat. No.

9.274 508 9.274 520 9.274 528 9.274 538 9.274 548 9.274 554 9.274 562 9.274 564

23

Liquid handling

For more articles see our Laboratory Catalogue from page 909 onwards

1

®

L A B W A R E

2

LLG-Pipette tips premium "economy" for digital microlitre pipettors

1

Certified free of DNase, RNase, suitable for microbiology. Guaranteed metalfree. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EG. Sterility acc. to EN 552/ISO 11137 and DIN EN 556.

LLG universal fit tips are engineered for a wide variety of pipettors and are ideal for laboratories with multiple brands of pipettors, even multi-channel pipettors. Our universal tips feature the universal grip design, using flexible materials with a series of bands and supports producing a positive seal. LLG tips have thin walls and a small surface area at the tip, greatly minimising the possibility of the tip retaining sample droplets. In addition the small surface area reduces the touch-off angle between the outer tip wall and the receiving sample tube. This reduced touch-off angle virtually eliminates the potential of capillary retention between the tip orifice and tube wall. Each of our tips is moulded to give a flash-free and uniform delivery orifice for consistent accuracy and reproducible sample delivery. All our tips are provided with calibration lines at specific volumes, acting as visual checks to minimise any risk of errors during sample aspiration.

LLG-Electronic Pipettors The new LLG-Electronic Pipettors have been designed for maximum performance, accuracy and simple operation. The microprocessor-based system reduces the possibility for human error. Lightweight and ergonomic controls help to reduce the risk of repetitive strain injuries which is common in manual pipetting. Attractively designed with an extraordinary finishing of parts due to high grade mould selection. That gives the LLG-Electronic Pipettor its final touch.

Superior in form and function The LLG-Electronic Pipettor is designed to meet strict criteria: high performance, high accuracy, safety and innovative ergonomic.

Ingenious single operation All software controls and functions of the LLG-Electronic Pipettors are done by one patented user-friendly innovative knob (jog-dial). No small switches and no snippy button keys as in old, conventional electronic pipettors. Each pipettor can be easily selected and identified by colour coding.

Modern visual display An innovatic OLED-Display for a graphic readout of status indicator for all functions of the new LLG-Electronic Pipettors.

Self-calibration system The user can calibrate the pipettor for solutions of different viscosity. The system also permanently controls all functions and indicates all errors.

Resourceful SCS-System This system controls the piston movement of the LLG-Electronic Pipettors and guarantees highest precision and accuracy.

CE-Marking The LLG-Electronic Pipettor is CE-marked as IVD certified and adjusted for the delivery (Ex) of its nominal volume as defined in ISO 8655.

Capacity

Accuracy ≤ ± A% (max. vol.)

Reproducibility Dispensing steps ≤ ± CV% (max. vol.)

µl 0.2 to 10 5 6 0.01 5 to 100 2.5 1.5 0.10 10 to 200 0.9 0.5 0.20 50 to 1000 0.4 0.5 1.00 100 to 5000 0.4 0.5 5.00 All LLG-Electronic Pipettors are supplied with EU, UK and US chargers.

Capacity

Colour

µl 0.1 to 10 clear clear 0.1 to 10 yellow 1 to 200 1 to 200 clear 1 to 200 yellow 100 to 1000 blue blue 100 to 1000 100 to 5000* clear 100 to 5000** clear clear 1000 to 10000 *for manual pipettors **for electronic pipettors

Type

1 bag of 1000 10 racks of 96 1 bag of 1000 10 racks of 96 10 racks of 96 1 bag of 1000 10 racks of 96 1 bag of 250 1 bag of 250 1 bag of 100

PK Cat. No.

1000 960 1000 960 960 1000 960 250 250 100

9.409 099 9.409 045 9.409 046 6.253 577 9.409 047 9.409 048 9.409 049 9.409 097 6.254 364 9.409 098

LLG-Low-Retention Pipette tips premium for digital Microlitre pipettors

2

Certified free of DNase, RNase, suitable for microbiology. Guaranteed metalfree. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EG. Sterility acc. EN 552/ISO 11137 and DIN EN 556.

Sample retention can be a major contributor to pipetting inaccuracy, and siliconization of tips has proved unsatisfactory because of autoclaving and contamination problems. For LLG quality tips a new polymer, NovellePolypropylene has been developed, that produces a ”super slick surface“ on our new ULR-tips, that actually improves with autoclaving and cannot leach from the tip surface. On average, Novelle Polymer and LLG ULR-tips reduces the tip retention by near 85% and decreases the standard deviation of the retained volume by more than 75%. Liquid handling accuracy and precision are crucial to success in today’s molecular biology laboratories, especially for DNA analysis and protein handling. A significant culprit of pipette inaccuracy is binding of sample. The LLG ULR-tips reduces the binding, thus increasing sample delivery accuracy. Tests demonstrates that LLG ULR-Tips significantly reduces the amount of DNA and protein bound by the tip. Furthermore LLG ULR-Tips offer a marked improvement over the best low retention technologies.

PK Cat. No.

1 1 1 1 1

9.281 050 9.281 051 9.281 052 9.281 053 9.281 054

Capacity

Colour Type

µl 0.1 to 10 0.1 to 10 1 to 200 1 to 200 100 to 1000 100 to 1000

Clear Clear Clear Clear Clear Clear

1 bag of 1000 10 racks of 96 1 bag of 1000 10 racks of 96 1 bag of 1000 10 racks of 96

PK

1000 960 1000 960 1000 960

Cat. No.

9.409 038 9.409 039 9.409 041 9.409 042 9.409 043 9.409 044

Spectrophotometers and pumps

24 For more articles see our Laboratory Catalogue from page 995, 1089 onwards

FH10

FH15

Spectrophotometer Genova Nano 3 in 1 Spectrophotometer Standard Spectrophotometer with all the functions of the 7315. With measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, quantitation and kinetics.

Life Science Spectrophotometer with all the functions of the Genova plus.

Additional measurement modes for the measurement of nucleic acid purity, protein assays, nucleic acid concentration and optical density of cell cultures add to the flexibility of the Genova Nano.

Micro-volume Spectrophotometer: Making measurements easier, quicker and less strenuous for 0.2 to 0.5 µl samples.

-

Micro-volume, life science and standard spectrophotometer in one Ideal for DNA, RNA and Protein measurements Only 0.5µl sample volume required Purity scan over entire wavelength range, 198 to 1000nm Detects DNA concentrations as low as 2ng/µl Easy and quick to clean Results are reproducible, accurate and easily obtained Method and result saving to USB memory stick 3 year warranty including Xenon lamp

Specifications Wavelength Range: Accuracy: Spectral Bandwidth: Path Length: Photometrics Absorbance Range: Absorbance Accuracy: Absorbance Precision: Concentration/Quantitation Maximum Concentration: Detection Limit: Measurement Time: Minimum Sample Size: Maximum Sample Size: DNA measurement modes: Protein measurement modes: Dimensions (WxDxH): Weight:

Type

Genova Nano

198 to 1000nm ±2nm 5nm 0.2 or 0.5mm (auto-ranging)

FH30

Laboratory peristaltic pumps FH10/FH15/FH30 - Simple, fast tubing changes - Fixed occlusion eliminates adjustment after tubing changes and assures operation against pressure up to 30 PSIG - Contamination free pumping fluid contacts only the tubing material - Controls are mounted on front panel with a separate single-turn speed control - Flow direction switch with center ”OFF“ position - Green LED power ”ON“ indicator - ”Prime“ button runs pump at maximum speed to rapidly prime or flush tubing - Reversible pump direction permits purging of tubing prior to use - Flow rates less than 2 ìl/min to 105 ml/min - Pressure up to 2.5 bar (30 PSIG) - Accurate and repeatable flow delivery - Filtration, up to 60 PSIG - Address a wide range of critical applications with tubing materials that are approved to USP class VI, FDA and NSF standards - Accommodates all sizes and formulations of microbore flow rated tubing ergonomic design - Space efficient low profile, stackable design - Remote capability actuate unit with a foot switch or contact closure

15 to 125A (10mm equivalent) ±2% at 260nm <0.005A between 0 and 1A (at 260nm and 0.5mm) 6000ng/µl (dsDNA) (at 0.2mm) 2ng/µl (dsDNA) (at 0.5mm) <6.5 seconds 0.5µl (at 0.2mm) 1.0µl (at 0.5mm) 5μl (in Nano mode) dsDNA, ssDNA, RNA, Oligonucleotides, 260/280, 260/230, Variable ratio BCA, Bradford, Lowry, Biuret, Direct UV 275 x 400 x 220mm 7.7kg

PK Cat. No.

1 9.775 171

Specifications Operating temperature: Storage temperature: Housing materials: IP rating Agency approvals: Controller dimensions (L x W x H): Weight: Voltage (50/60 Hz): Motor type: Control type:

Type

Channels

FH10 FH10 FH15 FH15 FH30

1 1 1 1 2

Flow rate ml/min.

0.002 - 1.65 0.017 - 11 0.07 - 50 0.8 - 105 0.8 - 14

Rotation speed rpm 1.2 - 10 13 - 80 50 - 300 20 - 100 20 -100

0 to 40ºC -25 to 65ºC Powder-coated steel IP 22 UL, cUL, CE, ROHS Power Supply 17.8 x 13.4 x 11.4cm 1.5kg 90-130 or 160-260V AC (auto selected) PMDC PWM (Pulse Width Modulated)

PK Cat. No.

1 1 1 1 1

9.828 601 9.828 602 9.828 603 9.828 604 9.828 605

25

Peristaltic pumps

For more articles see our Laboratory Catalogue from page 995 onwards

Rotarus® standard 50

Rotarus® Volume 100

Peristaltic pump for continuous delivery in speed ranges from 0.2 to 100 revolutions per minute. rotarus® standard is the powerful basic model in the peristaltic pump series.

The cost-effective, precise delivery pump for small delivery volumes and high viscosities is ideal for flexible applications, thanks to the use of diverse pump heads and hoses. The control panel on the housing enables simple and rapid configuration of the most important parameters, and the speed can be programmed directly on the unit. Performance class with 50 Watt ensures exact delivery in speed ranges from 0.2 to 100 revolutions per minute.

Housings are available with a white powder coating (protection class IP54) and inox stainless steel design (rotarus® standard 50i, protection class IP65). The pump head connection technology was developed for rapid handling.

Peristaltic pump for continuous delivery in speed ranges from 3 to 500 revolutions per minute rotarus® volume 100 is a comfortable, rapid dispensing pump for high flow rates with control options for velocity, flow rate, dispensing duration and total volume. Variable cycles and graduated pump speeds can be controlled reliably and precisely. Performance class with 100 Watt ensures rapid delivery in speed ranges from 3 to 500 revolutions per minute. Housings are available with a white powder coating (protection class IP54) and inox stainless steel design (rotarus® volume 100i, protection class IP65). RFID technology is used in the rotarus® volume to detect the pump head. The model also has automatic blockage detection and hose rupture monitoring. A control panel for the most important functions is integrated directly into the housing. In addition, rotarus® volume is equipped with an external control unit with touchscreen.

The pump head connection technology guarantees rapid handling as a standard feature.

Overview of details: - Changeable pump heads, single and multichannel design - Rapid tool-free changing of pump heads - Control panel located directly on pump housing - Calibratable - Operation with 24 V DC - USB and RS232 interface for PC link using interface (available as accessory) - Pump heads from other manufacturers can be fitted without difficulty using an adapter - Comprehensive accessory range

Type

PK Cat. No.

standard 50 standard 50i

1 6.258 629 1 6.258 630

Details as Rotarus® Standard 50 + Automatic pump head and hose detection with RFID technology + TFT touchscreen with user-friendly menu + Method memory

Type

PK Cat. No.

volume 100 volume 100i

1 6.257 247 1 6.256 566

Rotarus® pump heads

9.880 381

9.880 383

9.880 382

9.880 384

Type

Description

PK 10-16 PK 10-24 MKF 4-8 MKF 8-4 MKF 12-8

Single channel pump head Single channel pump head 4 Channel pump head 8 Channel pump head 12 Channel pump head

PK Cat. No.

1 1 1 1 1

9.880 380 9.880 381 9.880 382 9.880 383 9.880 384

Aspirators- and Vacuum pumps

26 For more articles see our Laboratory Catalogue from page 1013, 1018 onwards

9.880 930

Aluminium diaphragm pumps

9.882 228

Diaphragm pumps made with Aluminium and FPM as the wetted materials are the optimal selection for non-corrosive applications such as backing pumps for wide range and turbomolecular pumps, for regenerating cryopumps, for evacuating or transferring gases and for analysis equipment. Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, waste water control and other analytical processes.

The new ME 1 and ME 1 C diaphragm pumps offer a compact, high perfomance and easy to use solution which is perfect for both single and multiple filtrations.

9.882 229

Type

BioChem-VacuuCenter BVC basic/control/professional The compact BioChem-VacuuCenter offers the perfect solution for safe, sensitive and efficient aspiration of supernatants or filtration in all application areas.

- The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network - The BioChem VacuuCenter BVC control and professional serve for efficient and convenient aspiration of supernatants. The vacuum level and thus the suction force is sensitively adjustable by the electronic touch panel and allows a delicate and reproducible operation. The chemically-resistant diaphragm vacuum pump is automatically turned on and off as needed, which is reducing the low noise level even further.

- The BVC professional with 4L PP bottle with self-closing quick couplings minimises risks in transporting hazardous waste and in contamination of the workplace.

- All systems are available in two complete equipment options with different collection flasks and ready to accept a second aspiration hand controller (VHC) to support two users. The 2L borosilicate glass bottle (all types with "G" in the description) with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4L bottle of unbreakable polypropylene (PP) is used.

Country specific power cable, please order separately.

Supply requirements: Type

Pump

BVC basic BVC basic G BVC control BVC control G BVC professional BVC professional G

Model ME 1C ME 1C ME 1C ME 1C

ME 1 (CEE) ME 1 (CH) ME 1 (UK)

Flow rate (50/60 Hz) m続 / hr.

0.7 / 0.85 0.7 / 0.85 0.7 / 0.85

Ultimate pressure

Dimensions (W x D x H)

mbar 100 100 100

mm 247 x 121 x 145 247 x 121 x 145 247 x 121 x 145

PK Cat. No.

1 9.880 930 1 9.880 931 1 9.880 932

9 880 934

Chemistry diaphragm pumps Gases and vapours only come into contact with chemically-resistant, fluorinederived plastics in chemical ("C") diaphragm pumps. Does not require a cooling trap. Optional accessories or direct use of complete pumping units based on these pumps enable almost 100% recovery of the solvents in use and protection of the atmosphere.

230V 50/ 60Hz Dimensions Weight (W x D x H) mm kg 200 x 250 x 490 2.8 180 x 230 x 430 2.8 194 x 408 x 500 7.3 194 x 408 x 430 7.7 194 x 408 x 500 7.3 194 x 408 x 430 7.7

PK Cat. No.

1 1 1 1 1 1

9.882 225 9.882 226 9.882 227 9.882 228 9.882 229 9.882 230

Type

Flow Ultimate Dimensions rate pressure (W x D x H) (50/60 Hz) m続 / hr. mbar mm ME 1C (CEE) 0.7 / 0.85 100 247 x 121 x 145 ME 1C (CH) 0.7 / 0.85 100 247 x 121 x 145 ME 1C (UK) 0.7 / 0.85 100 247 x 121 x 145 Diaphragm pumps ATEX-models available on request.

PK

1 1 1

Cat. No.

9.880 934 9.880 935 9.880 936

27

Lab-Accessories

For more articles see our Laboratory Catalogue from page 181, 755, 858 onwards

®

L A B W A R E

9.401 090

9.401 091

Cryo-Safe™ Mini Cooler Polycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that any labels or marks on the vials or tube are not damaged.

- The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the cooler - side handles ( 9.401 090, 9.401 091) or a wire handle for easy carrying - Coolers can be stacked to save space and maximize freezer volume - rubber feet to prevent slipping.

- Adapters change well size for 0.5 ml tubes (all models except 9.401 092) - All polycarbonate cooler body cleans easily - Use to protect samples in freezers with defrost cycle and fluctuating temperatures

Dimensions (L x W x H) mm 151 x 108 x 125 151 x 108 x 125 197 x 140 x 190 243 x 157 x 146 243 x 157 x 146

Colour

red yellow red red yellow

Temp. range °C ≤ 0°C for 2.5 h ≤ -15°C for 1 h ≤ 0°C for 3 h ≤ 0°C for 3 h ≤ -15°C for 1.5 h

1 1 1 1 1

9.401 090 9.401 091 9.401 092 9.401 093 9.401 094

Single hotplate Ceran®

Dimensions (W x D x H) mm 305 x 410 x 75

Type

PK Cat. No.

LLG-Laboratory Power Failure Detector

1 6.255 819

Sealing tape PetriSeal/ContainerSeal

Housing made of stainless steel, brushed and polished, in a unique Softline Design, Schott Ceran cooking surface. Adjustable power control with powersaving. Two-circle HiLight technique, thus extra large heating zone (dia.

210mm) can be activated. Thermal shutdown and automatic cooking system.

Residual heat indicator and warning light.

Type

- Alarm is reported immediately visually and acoustically - Reports alarm even for short power outages or for a period of at least 12 hours (can be switched off manually) - Plug safety cover offers protection against accidental pulling the plug - Maximum total power of connected devices. 3500W power supply 230V 50Hz - Max. Rating 16 A - With built-in battery Scope of supply: 1 x power failure detector 2 x plug safety caps 2 x screws

PK Cat. No.

Single hotplate Ceran®

Specifications One unit provides heat outputs of: 1. Heating area: 2. Heating area: Supply requirements:

LLG-Laboratory Power Failure Detector

dia. 140mm, 1000W dia. 210mm, 2200W 230 V PK Cat. No.

1 9.645 510

An ideal Sealing Tape for Petri Dishes, Microplates, Lids, Caps and other Lab Items. Tape stretches, conforms and seals the irregular perimeter of microtiter plates and petri dishes. Tape and adhesive resist most solvents and caustic agents. Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100°C. Waterproof.

Colour

Width

Width

Blue Clear Red White Yellow

mm 13 13 13 13 13

mm 13 13 13 13 13

PK Cat. No.

1 1 1 1 1

9.170 057 9.170 058 9.170 059 9.170 060 9.170 061

Lab-Accessories - Block heaters

28 For more articles see our Laboratory Catalogue from page 252, 905, 1294 onwards

9.816 801

Pipette stand Flip & Grip™ Unique pipette holder that gives you the option of using on the bench top, or as a hanging under shelf holder to help maximize your working space available.

- Will hold up to 6 single channel pipette, or a combo of 3 single and 3 multichannel - Holds most common brands. Rubber grips prevent scratching pipette - Holder rotates for easy pipette selection and storage - Weighted base. Fixing screw provided for under shelf option - Dimensions (W x H): 193 x 332mm (bench top style); 193 x 187mm (under shelf style)

Colour

Blue Lime Magenta

PK Cat. No.

1 9.194 002 1 9.194 003 1 9.194 004

9.816 807

Dry Block Heater Digital block heaters for 1, 2, 3 or 4 aluminium blocks provides precise temperature control in small vessels. Included PT 1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.

- Stepless adjustable temperature up to 120°C - Timer: Countdown, adjustable from 1min to 99h 59min - Counter: Display of heating time - Highly versatile with a large number of blocks - Error code display - Fixed safety circuit - Acoustic signal at end of test Without blocks. Please order separately.

Safety box DURAPorter™, PC Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. The clarity of the DuraPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions.

- Polycarbonate construction are available in three colors for use/owner identification - Silicone water-tight seal and three lid clasps provide secure closure - Carry handle folds neatly into body space allowing the units to be stacked - Lid opens a full 180°, allowing total access to contents and making it easier to clean - Will accommodate 13 and 16 mm tubes in a 72-place OneRack™, or similar sized/brand of rack - Use the separators provided to create your own compartment sizes, or use empty to transport larger products and equipment - Autoclavable - Dimensions (WxDxH): 380 x 160 x 196 mm

Colour

Clear with blue handles Yellow with yellow handles Red with red handles

PK Cat. No.

1 9.194 005 1 9.194 006 1 9.194 007

Specifications Temperature range Display: Heat control accuracy: Connection for ext. temperature sensor: Control accuracy with sensor: Temperature constancy in medium: Temperature stability within the blocks at 37°C: Temperature stability within the blocks at 60°C Fixed safety circuit: Protection class acc. to DIN EN 60529: Power supply:

Heating Dimensions power Set-up plate (W x D) W mm Dry Block Heater 1 150 96 x 75 Dry Block Heater 2 250 96 x 152 Dry Block Heater 3 300 96 x 227 Dry Block Heater 4 375 96 x 304

Type

Dimensions (W x D x H) mm 151 x 228 x 73 151 x 304 x 73 151 x 380 x 73 151 x 456 x 73

RT to +120°C LED ±1K DIN 12878 ±1K ±1K ±0.2°C ±0.4°C +140°C IP 21 220-240V, 50760Hz

PK Cat. No.

1 1 1 1

9.816 801 9.816 804 9.816 807 9.816 810

29

Chromatography

For more articles see our Laboratory Catalogue from page 1366 onwards

Syringes, disposable, PP, sterile Polypropylene with two-piece plunger and Luer nozzle. Without needle.

Supplied sterile, individually pouch-sealed in outer boxes.

Capacity

PK

ml 1 5 10 50

Cat. No.

100 100 100 60

9.950 296 9.950 298 9.950 299 9.950 301

Syringes BD Discardit™ II, disposable, 2-piece, PP/PE, sterile Clear barrel for perfect visualisaion of syringe contents.

- 2-piece syringes with Luer-Tip - Smooth plunger movement, reduced sliding force - Retaining ring: prevents accidential plunger rod withdrawal - Leak-tight: Tested in compliance with ISO 7886-1 - Scale marking: accurate graduation suited to user's needs - Design of finger grip flanges ensure stability and comfort during injection - Ergonomically designed plunger for single-handed operation - Barrel material: Polypropylene - Plunger material: Polyethylene - Plunger lubricant: Oleamide - Colour-coded packing units - Sterilization method: Ethylene oxide - Silicone oil-free - Sterile single packing, single use, latex-free, PVC-free For pressure applications we recommend three-part syringes.

Capacity ml 2 5 10 20

Nozzle type Concentric Eccentric Eccentric Eccentric

Grad.

PK Cat. No.

ml 0.10 0.20 0.50 1.00

100 100 100 80

6.052 153 7.619 784 9.410 403 6.052 157

Syringe needles, Stainless steel, disposable, sterile

Syringes for Agilent GC autosampler GC syringes for Agilent autosampler 7673, 7683 and 6850 with fixed or removable needle two different needle diameter and tapered needles high reproducibiliy, low carry-over Gauge (OD) mm 23-26s (0.63/0.47) 23-26s (0.63/0.47) 23-26s (0.63/0.47) 23-26s (0.63/0.47) 23-26s (0.63/0.47) 23-26s (0.63/0.47) 26 (0.47) 26 (0.47) 23 (0.63) 23 (0.63) 26 (0.47) 26 (0.47) 23 (0.63) 23 (0.63) 26 (0.47) 23 (0.63) 23 (0.63)

Needle Typ fixed fixed fixed fixed fixed fixed fixed fixed fixed fixed fixed fixed fixed fixed removable removable removable

Capacity

PK Cat. No.

µl 5 5 10 10 10 (Gas tight) 10 (Gas tight) 5 5 5 5 10 10 10 10 0.5 0.5 1

4.008 261

1 6 1 6 1 6 1 6 1 6 1 6 1 6 1 1 1

4.008 257

With Luer push-on fitting for use with disposable syringes. Supplied sterile in boxes of 100.

LLG-PE Snap Ring Seals ND11, ready assembled

Gauge

Caps

Septa

transparent, centre hole blue, centre hole

Red Rubber / PTFE beige Red Rubber / PTFE beige

Diam.

Length

mm 21G x 1½ inch* 0.8 23G x 1 inch 0.6 *are intravenous thin wall needles.

mm 40 25

PK Cat. No.

100 9.950 305 100 9.950 306

9.221 270 6.204 103 6.226 427 6.254 971 9.221 271 9.221 272 6.203 350 6.205 076 9.221 273 6.072 528 9.221 274 6.206 502 6.089 587 6.050 962 6.228 788 9.221 275 9.221 276

Hardness

Thickness

PK Cat. No.

45° shore A

mm 1.00

100 4.008 261

45° shore A

1.00

100 4.008 257

Chromatography

30 For more articles see our Laboratory Catalogue from page 1366 onwards

4.008 243

4.008 239

9.003 451

4.008 228

4.001 521

7.060 469

LLG-Aluminium Crimp Seals ND11, ready assembled and empty Crimp Caps ND11

LLG-PP Short Thread Seals ND9, ready assembled

Caps

Septa

Caps

Septa

aluminium, silver, centre hole

Natural rubber red-orange / TEF transparent (corresponds to Agilent quality) Red Rubber / PTFE beige

blue, centre hole blue, centre hole blue, centre hole

Red Rubber / 45° shore A PTFE beige Silicone white / 55° shore A PTFE red Silicone white / 55° shore A PTFE blue, slit

Hardness

aluminium, silver, centre hole aluminium, Natural rubber / silver, Butyl red-orange / centre hole TEF transparent

60° shore A

Thickness mm 1.00

PK Cat. No.

100 4.008 239

45° shore A

1.00

100 4.008 243

45° shore A

1.00

100 7.060 469

Hardness

Thickness mm 1.00

100 4.008 228

1.00

100 9.003 451

1.00

100 4.001 521

LLG-Short Thread Vials ND9, wide opening and Micro-Inserts

o.d. x Height Capacity Colour Form PK Cat. No.

mm ml

11.6 x 32 1.50 clear, labeling field flat bottom 1000 6.803 174

11.6 x 32 1.50 amber, labeling field flat bottom 1000 6.088 871

*With labelling field and fill line

LLG Crimp Neck Vials ND11, small and wide opening (flat bottom)

Capacity o.d. x Height Colour Form PK Cat. No.

ml mm

1.50 11.6 x 32 clear, labeling field wide opening 1000 7.608 160

1.50 11.6 x 32 amber, labeling field wide opening 1000 7.620 828

LLG-Snap Ring Vials ND11, wide opening and Micro-Inserts

Capacity o.d. x Height Colour Form PK Cat. No.

ml mm

1.50 11,6 x 32 clear, labeling field flat bottom 1000 7.622 228

1.50 11,6 x 32 amber, labeling field flat bottom 1000 7.613 330

PK Cat. No.

31

Chromatography

For more articles see our Laboratory Catalogue from page 1366 onwards

Septa for Agilent GC All septa are made with a high grade silicone material to minimize needle coring. These new materials meet or exceed industry standards, giving you reassurance in the quality of your work. All these septa grant a good durability, excellent resealing properties and excellent solvent resistance.

GP = General Purpose Silicone Septa for non-demanding routine applications up to 200째C. EC = High Temperature Silicone Septa, for significantly longer injection life, low bleed and low injection port adhesion.

MN = High Temperature Premium Silicone Septa for autosamplers, up to 400 injections per septum.

Ferrules for Agilent GC High quality ferrules made of 100% Graphite or 15%Graphite/85%Vespel Type A: 15%Graphite/85%Vespel, for injectors and detectors at atmospheric pressure (e.g. FID)

Also available: Septa for instruments from Perkin-Elmer, Shimadzu, Thermo and Varian/Bruker.

Type B: 15%Graphite/85%Vespel, for GC-MS interface connection Type C: 100%Graphite, for injectors and detectors at atmospheric pressure (not for GC-MS) Column ID mm 0.1 - 0.25 0.32 0.53 0.1 - 0.25 0.32 0.53 0.1 - 0.32 0.45 - 0.53

Ferrule ID mm 0.4 0.5 0.8 0.4 0.5 0.8 0.5 0.8

Type

PK

A A A B B B C C

10 10 10 10 10 10 10 10

Cat. No.

6.223 558 9.221 278 9.221 279 6.088 109 6.059 976 6.059 977 7.652 355 9.221 280

Diam.

Material

mm 5.0 5.0 9.5 9.5 9.5 11.0 11.0 11.0 11.0 12.5 12.5 12.5

GP MN GP EC HT GP EC MN HT GP HT EC

Temp. max. 째C 200 400 200 400 400 200 400 400 400 200 400 400

PK

Cat. No.

50 50 50 25 25 50 25 50 25 50 25 25

9.003 590 9.003 591 6.224 189 9.003 592 9.003 593 6.085 419 9.003 594 6.255 348 9.003 595 6.087 242 9.003 596 9.003 597

Inlet Liner and o-rings for Agilent GC

7.653 145

6.236 751

6.223 553

9.003 588

Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. SGE's inlet liners come as a complete, single packed unit.

5 or 25 packs, individualy packed Complete with instrument appropriate o-rings and sealing rings Each pack is supplied with quality test results Description

Split, Straight-through Liner Split, with Quartz wool Split / Splitless with Single Taper Split / Splitless with Single Taper (Quartz Wool) Split/Splitless Focus Liner Split/Splitless Focus Liner Split/Splitless Tapered Focus Liner Split/Splitless Tapered Focus Liner Split/Splitless FAST Focus Liner Split/Splitless Tapered FAST Focus Liner Split/Splitless Recessed Gooseneck (Quartz Wool) ConnecTite Liner Bottom Hole Viton o-ring, suitable for liners with OD 6,3mm

Ext. diam. mm 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3

Int. dia. mm 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 2.3 2.3 4.0 4.0 4.0

Length

PK

Cat. No.

mm 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5 78.5

5 5 5 5 5 25 5 25 5 5 5 5 10

7.653 145 9.003 576 9.003 579 6.236 751 6.223 552 6.239 332 6.223 553 9.003 572 6.223 554 9.003 586 9.003 588 9.003 587 9.221 277

/DE /RJLVWLFV *URXS *PE+ $P +DPEXFK ' 0HFNHQKHLP *HUPDQ\

7HO

)D[

LQIR#//* GH ZZZ //* GH

-"#035014

Cryogenic box Work2Storeâ&#x201E;˘, PP Reduce sample handling time and the need for several racks when working with samples for cold temperature storage. Patent-pending opening and closing mechanism allows the rack to expand, creating needed room for sample manipulation. Then simply collapse the rack back to its compact form and it is ready for the freezer. Temperature range -80 to 121°C. - Clear lid locks the rack together for safe handling and transportation - Wells have a center depression to stabilize conical tubes and a cryogenic vial lock for one handed cap removal - Stackable, autoclavable and with alphanumeric well identification - Will fit into standard 2" (52mm) freezer racking

Type

For tubes

Array

Work2Storeâ&#x201E;˘

15/2.0 ml

96/64

Dimensions open (W x D x H) mm 310 x 128 x 33.5

Dimensions closed (W x D x H) mm 133 x 133 x 53

All prices exclusive VAT or other local taxes. Prices valid until 31.12.2013. E & OE.

PK

1

Cat. No.

9.194 001