PCD Chipbreaker Type »3D-active« - 2016 USA

®™

presents

PCD Chipbreaker Type »3D-active«

Pat. pending

... there is no better solution on the world market

No long chips anymore!

An absolute must have for turning aluminum ...

PCD Inserts with »chipbreaker« Type »3D-active« Pat. pending

Insert with active chipbreaker especially for turning aluminum and non-ferrous long chipping materials Order Code

VCMT

Art.No.

D - VCMT - 11 03 04 - X3D

42221970

D - VCMT - 16 04 08 - XX3D

42221972

D - VCMT - 16 04 04 - X3D

D - VCMT - 16 04 08 - XXX3D

DCMT

42221973

D - DCMT - 07 02 02 - X3D

42221980

D - DCMT - 11 T3 04 - X3D

42221982

D - DCMT - 07 02 04 - X3D D - DCMT - 11 T3 08 - XX3D

D - DCMT - 11 T3 08 - XXX3D

CCMT

42221971

42221981 42221983 42221984

D - CCMT - 06 02 02 - X3D

42221990

D - CCMT - 09 T3 04 - X3D

42221992

D - CCMT - 06 02 04 - X3D

D - CCMT - 09 T3 08 - XX3D D - CCMT - 12 04 04 - X3D

D - CCMT - 12 04 08 - XX3D

D - CCMT - 12 04 08 - XXX3D

Recommended parameters for turning X3D for finishing

XX3D for semi-finishing

XXX3D for roughing

Vc : 800 - 2500 m/min fn : 0,05 - 0,3 mm/r ap : 0,1 - 1,0 mm

Vc : 800 - 2500 m/min fn : 0,1 - 0,3 mm/r ap : 0,5 - 2,0 mm

Vc : 800 - 2500 m/min fn : 0,1 - 0,3 mm/r ap : 2,0 - 3,0 mm

42221991 42221993 42221994

42221995 42221996

05/2016 US dl

Type »3D-active«

LACH DIAMOND INC.

4350 Airwest Drive, S.E. Grand Rapids, MI 49512 Tel. (616) 698-0101 Fax (616) 698-0232 office@lachdiamond.com www.lach-diamond.com

™