2008 Horseshoe Road Lancaster, PA 17602
2014 AFTER MARKET PARTS CATALOG
(717) 299-3721
Where
Quality
and
Integrity
IS NEVER IN QUESTION
ALSO SEE: OUR HAMMER MILLS P. 2 & USED EQUIPMENT P. 53
John Deere 684/ Kemper 330 ®
Why pay the mill when you can own it ?
OWN THE MILL.
Here at Lancaster Parts and Equipment we are taking eight row heads and converting them to four row. This gives us many extra parts to offer you along with quality rebuilt four row heads. Also.....ask about our inventory of quality rebuilt gear boxes and head parts.
4000 SERIES REAR DISCHARGE
Rear discharge with bagger hook up. You connect Bagger to this unit then use one tractor to run both hammer mill and bagger.
4000 SERIES BLOWER OUT Hook up to your silo and grind corn. Will fill up to 90ft. with a 200 horse tractor
Hammer Mills production will vary depending on 3 factors; Moisture in grain, Size of Screen and Horse Power.
Example; Moisture of 25 to 28% Screen Size of 5/16” Horse Power of 200, Will produce 1 ton a minute.
Check out our selection of used KemperTM ChampionTM 3000 Heads!
717-299-3721
a little about us...
Lancaster Parts and Equipment began in March of 1965 as Lancaster Silo by Paul S. Smucker. We have been dedicated to providing our customers with the highest level of service and quality of products at affordable prices. In Dec. of 2013, the company changed hands to Paul’s son, Omar B. Smucker, and the company’s name was changed to Lancaster Parts & Equipment Inc. In the 1990’s, Lancaster Parts and Equipment started building kernel processors. Then, in 1995, we went from building roller mills to manufacturing hammer mills. Today, we produce quality hammer mills and a large selection of aftermarket parts for a variety of farm equipment. Years of experience and a quality product are what you can count on when you choose Lancaster Parts and Equipment.
Lancaster Parts & Equipment 2008 Horseshoe Rd Lancaster PA 17602
Table of Contents John Deere® 5000 Series Harvester Parts*........................6 - 22 John Deere® 6000 Series Harvester Parts*......................23 - 32 630A-B + 640A-B Parts*......................................................33 - 34
The Crew!
John Deere® 666 & 664 Corn Head*.................................. 36 - 37 John Deere® 4 Row (conversion Head)*.............................38 - 39 John Deere® 2 & 3 Row (conversion Head)*..............................40 New Holland® 2-row 824 Corn Head*........................................41 Misc. Hay Head Teeth.................................................................42 New Holland® FX parts*.......................................................42 - 43 New Holland® 360N Gathering Chain..........................................44 New Holland® 360N Parts* & Adapters................................44 - 45 New Holland® 40 Blower Parts*...........................................46 - 47 Cup Paddles - New Holland® 900 & FP Parts*...................48 - 49 Blower Bands..............................................................................49 676 Adapter Plates......................................................................50
Top Left to Right, Bryant Glick, Jason King, Nathan Glick, Omar Smucker, Wilmer Glick, Daniel Smucker, &Joe Fisher Bottom (Left to Right) Jesse Stoltzfus, Whipper (the dog), Darryl Martin, Zachary Clegg, Dale Metz, & Sam Lapp.
Mission and Vision Lancaster Parts and Equipment makes it their mission each day to produce quality equipment. When it comes to our customers, we are dedicated to providing them with only the best farm equipment that Lancaster County has to offer. If you’re searching for harvesters, hammer mills, or after market parts for various pieces of farm equipment, rest assured that when you buy from Lancaster Parts and Equipment, you’re guaranteed a piece of equipment that will last for years to come.
Lancaster Parts and Equipment strives to be the best in the business. Building on our already strong reputation, we are always on the lookout for ways to improve and give our customers an even better experience with our farm equipment. We look forward to meeting all your needs.
Header Drives..............................................................................51 KemperTM 4500 & J.D. 676 Parts*..............................................52 Spouts.........................................................................................53 KemperTM ChampionTM 3000 Parts*....................................54 - 55 Bale Grabber ..........................................................................56 *Replacement parts made to meet or exceed the quality and durability of the original equipment
Claas® and Lexion® are registered trademarks of Claas KGaA, MBH • John Deere® and JD® are registered trademarks of Deere & Company • Case®, Case IH® and New Holland are registered trademarks of CNH America, LLC • NHTM is a trademark of CNH America, LLC • KemperTM & ChampionTM are trademarks of Maschinefabrick Kemprt Gmbh
5
JD® 5000 K.P. Parts
JD® 5000 K.P. Parts
717-299-3721
Part #
9
10
7
1
6
3
2
34 4
5
8
17
35 21
19
18
16
11
15
36
20
11
12
14
23 26
28
27
25
20
19
29
21
26 32
25 31
33
22
30
29 24
33 We do complete rebuilds on these processors.
6
If you don’t see the part you need, give us a call, we probably have a new or used one in stock.
DESCRIPTION
SP190 SP189 SP193 SE17340 17392 LAE41126 SP194 SP152 SP153 AE46565 SP132 SP150 SP143 AE45398 SP128 SP135 SP134 SP142 SP119 SP117 SP137 SP138
$32.49 $24.0 $9.59 $10.99 $10.89 $8.29 $21.99 $156.99 $10.89 $30.99 $56.99 $2.59 $4.99 $145.99 $9.99 $7.89 $50.00 $49.99 $6.75 $11.49 $164.99 $973.50 $973.50 $9.99 $179.99 $36.99 $2.49 $4.99 $5.69 $39.99 $39.99 $34.99 $21.99
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
34
SP167
$44.99
• Ider Pulley
35
SP168
• Idler Arm (drive Side)
36
LS708520
$99.99 $252.49
1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
LAE41922 LZ11242 SP186 LE69927 LE69928 LE69438 SP210 SP212 SP213 SP217 AE42998
T Handle Holder T Handle Heavy Duty Spring Idler Holder Bracket Top Idler Holder Bracket Bottom Eyebolt Shield Mounting Bracket #AE44319 Belt Shield Pin Pin Handle Core Bearing Bolt Pulley Cap 2 Grove Pulley Seal (JD Pulley Only) [1.75x2.44] Seal (LSC Pulley Only) [1.75x2.51] Idler Arm Bearing Hub 4 Hole Bearing Plate 1-3/4” Collar Top Bearing Kernel Processor Lower Roll Top Roll Collar Bottom Roller Bearing Adjuster Stud (LSC Stand. Thread) 1/4” Slide Block Shim .025” Slide Block Shim 4” Shaft Washer Roll Stop (Left Hand) Roll Stop (Right Hand) Lower Bearing Support Lower Roller Spring
• Idler Pulley Assembly
7
JD® 5000 K.P. Parts #1 LAE42157 Single Auger Housing Fits JD 5000 Series K.P. $804.99
#2 AE45967 Cleanout Door $28.99
Double Auger Haylage Tunnel
717-299-3721
LAE42157G
LAE42157-com
Single Auger Tunnel w/ all components Shown + Gear box
LS70025 Double Auger Tunnel Haylage Complete
$2,200.00
7
$4349.99
#3 LAE42460-H
Single Auger Tunnel w/ all components Shown
$2,200.00
2
Housing $54.99
1
#3a AE37057 Hex Bearing $59.99
#4 LAE42158 Front Bearing Mount $184.99
8
#5 LAE45495 K.P. Auger
*Spline Hub not included
$709.99
#6 LAE42176
3a
Gearbox Mounting Plate $124.49
3 LAE42460
Bearing & Housing
$104.99
#7 LS42157 Single Auger Chute Housing Liner $69.99
#8 LE73996 Spline Hub $81.99
KP5000KIT-AUG
K.P. With Single Auger Tunnel And Gear box $9,800.00
JD® 5000 K.P. Gear Box
Part#
Part #
8
DESCRIPTION
Price
1
LAE40530 $309.99
2
LE67112
3
Description
Part#
Price
Description
Gear Box Housing
14
LE63258
$68.09
Gear 15 Tooth Hex
$24.99
Bolt On Plate
15
LAE33741
$350.00
Auger
LS5010
$3.89
Door Hinge
16
LE56075
$76.99
Top Plate
4
LS5009
$59.99
Sprocket
17
LE56383
$63.99
Small Top Discharge Plate
5
LE58313
$49.99
Gear Box Wear Plate
18
LE63911
$122.46
Bottom Plate
6
LE58255
$35.99
Front Left Side Panel
19
LE63909
$55.98
Rear Bearing Plate
7
LE58254
$32.99
Front Right Side Panel
20
FB-32255
$3.10
Three Hole Bearing Flange
8
LS5007
$64.99
Front RT Side Mid Panel
21
LS5019
$27.69
1” Hex Bearing
9
LE52452
$6.99
Adjustable Axle Plate
22
LE63908
$26.10
Bottom Discharge Plate
1
LS70248
$2149.99
K.P. Auger Gear Box
2
LE69333
$178.99
Gear Box Shaft
3
JD8194
$14.99
Gear Box Bearing
4
JD8230
$8.99
Gear Box Bearing Race
5
AM1091T
$20.99
Gear Box Seal
6
LM44073
$13.89
Spring
7
Z11242
$73.99
T Handle
10 LE49755
$65.99
Front Left Side Mid Panel
23
LE50622
$5.50
Pin Hookup Plate
8
LE69438
$8.29
Adjuster Bolt
11 LE59886
$69.99
Front Top Plate
24
LE48543
$55.50
Discharge & Hookup Plate
9
LAH66202 $24.49
Idler Pulley
12 LE56079
$86.99
Right Side Plate
25
SP229
$8.37
1” Strap
10
LAE41922
T Handle Holder
13 LE63910
$109.99
Left Side Plate
26
LS50098
$41.48
1” Hex Shaft
$32.49
9
Single Auger Haylage Tunnel
LAE43928 Single Auger Tunnel Haylage, Complete
10
6 11
$2,400.
22
1
5 7
5000 Series Cutter Head Shields
717-299-3721
3
00
21
4
22
4
Part #
DESCRIPTION
1
LAE35570
$59.99
3/16” Thick Deflector Plate Prevents K.P. from Choking Up
2
LAE38618
$65.99
Support Plate
3
LAE40698
$174.99
Cutter Head Door
4
LE66518
$118.99
Cutter Head Sliding Door
Dump Wagon Valve
2 17 19
14
20
1 2
3
18
13
Part #
10
LP001050K 5000 Series Wet Line Kit Includes, Valve, Lever, Controls, Hoses & Fittings. (Will double dumping speed)
16
DESCRIPTION
Part #
13
12
11
8
10
15
8
9
$700.00
5000 Series Shields
7 66
DESCRIPTION
1
AT410C
$142.50
Back bearing Plate
12
24H1534
$.75
Shim Washer
2
AT413C
$272.00
Front Grearbox
13
CA24430
$80.92
Gear
3
LAE44941
$600.00
Auger
14
AT433
$12.25
Strap for blower
4
AT421C
$580.00
Main Auger Housing
15
AT432
$22.50
Gearbox Lid
5
AT415
$8.50
Hookup Tab
16
AT437
$12.64
RH Filler Plate
6
AT434
$29.50
Wear Plate (Top)
17
AT436
$11.55
LH Filler Plate
7
AT435
$42.50
Wear Plate (Bottom)
18
AT427
$16.25
RH Feed Guide
8
H135410
$3.96
Bearing Flange
19
AT426
$16.25
LH Feed Guide
9
LAE37997
$102.38 Hex Shaft
20
AT414
$28.00
Blower Plate
10 AE37057
$51.00
Hex Bearing
21
AT411
$34.99
Cleanout Lid
11 LAE42460
$104.99 Hex Bearing & Housing
22
5071A52
$24.60
Pull-Action Latch
Part #
DESCRIPTION
1
LAE31927 $30.99
•
Shield Pin
2
LAE41322 $68.99
•
Door Shield
3
LAE45622 $157.99
•
Shield
4
LAE45943 $50.99
• •
Support Bracket For Slip Clutch Shield Fit JD 5720, 5730, 5820, 5830
5
LAE45942 $211.99
• •
Shield Fits All 5000 Series
6
LAE45836 $206.99
•
Top Shield Cutter Head
7
LAE44516 $109.99
•
Front Hydraulic Shield
33
7
22
11
55
44
11
5000 Series Upper Feed Rolls
5000 Series A.C. Parts
717-299-3721
Part #
DESCRIPTION
14
LE72817
$21.99
Support Strap Upper Rear Feed Roll
15
LE72818
$24.99
Support Strap Upper Rear Feed Roll
16
LE55609
$7.99
Washer Upper Rear Feed Roll
17
Z67236
$59.99
Feed Roll Lift Arm Spring LZ67236
18
LE82550
$13.99
Eye Bolt
19
E48604
$55.40
19a LE75928
Upper Feed Roll Drive Slip Clutch Drive Sprocket -To fit all 5440,5460,5720,5730,5820 & 5830 SN. 740001 & Before Upper Feed Roll Drive Slip Clutch Drive Sprocket -To fit all 5440,5460,5720,5730,5820 & 5830 SN. 740001 & After
$79.99
v
LAE34867 Universal Joint Yoke and Sprocket for top feedroll drive $95.75 Part #
12
#2 LE75266
DESCRIPTION
5
LAE43635
$842.00 W/O Teeth $1050.00 With Teeth & Bearings
5a
LAE43635T
$35.00 ea.
Teeth for Upper Front Feed Roll (use w/ LAE43635) need 8
Upper Front Feed Roll With Metal Detector Straight tooth design
5
LAE43198
$535.00
Upper Front Feed Roll Without Metal Detector Straight tooth design
5b
LAE43635T
$22.50 ea.
Teeth for Upper Front Feed Roll (no Metal Detector) need 8
5
LAE43198S
$934.99
Upper Front Feed Roll Without Metal Detector Standard tooth design (See pic Above)
5c
LAE43635S
$33.50
6
LE72037
$107.00
Shaft to fit Upper Feed Roll - 30.1/2” long X 1.3/8”
7
JD9865
$9.99
Upper Front Feed Roll Bearing
8
LE53699
$3.55
Upper Front Feed Roll Seal
9
AE37101
$399.99
10
LE72352
$43.50
Shaft, to fit Upper Rear Feed Roll
11
JD9438
$39.99
Feed Roll Lift Arm Bearing
12
AE40254
$225.99
Left Hand Feed Roll Lift Arm - Includes Bearing
13
AE40253
$172.99
Right Hand Feed Roll Lift Arm - Includes Bearing
Condenser Bracket $18.99
2 #1 AH87966
#3 SE501460
Condenser Fits 5830, 5730,5820, 5720
New Nippondenso Replacement Compressor, Without Manifold TY6626, TY6766, RE125513, SE501460, SE501464
$279.99
$304.99
Bolt On Sprocket to fit either Style upper feed roll
Upper Rear Feed Roll
3 #6 AT162848
1
Receiver Drier w/ Oring, & sight glass AT162848, AT125596 $40.99 #7 LH87092 Mounting Bracket $22.99
4
6 7
5 #5 LE74160 Compressor mounting bracket $15.99
#4 LAH116744 Compressor mounting bracket $40.99
13
5000 Series Lower Feed Rolls 9
10
11 2 4
14
5
1
4
Part #
8
4 6
3 12
15
5000 Series Lower Feed Rolls
717-299-3721
Part #
DESCRIPTION
1
LAE35423
$340.00
Lower Front, Feed Roll with1” Hex shaft
1a
LAE37237
$340.00
1b
LAE37238
2
7 4
DESCRIPTION
7
LE48605
$35.48
Lower feed roll drive slip clutch sprocket • To fit all 5200, 5400, 5440, 5460 , 5720, 5820, 5730 & 5830 harvesters SN. 740000 & before
8
LE48802
$45.99
Smooth Roll Cleaner
9
LE68041
$9.99
Support Strap
10
LE71828
$6.50
Support Shims, Takes 12
11
LAE38057
$51.99
Wear Plate, Left Side
12
LAE42697
$72.99
Lower Front, Feed roll bearing With Metal Detector
13
LS5032
$49.99
14
LS5033
$49.99
13
Front cutterhead frame repair (must cut out a section of frame and weld this part in.) Left Hand side Front cutterhead frame repair (must cut out a section of frame and weld this part in.) Right Hand side
5000 Series Shear Bar Adj. Part #
DESCRIPTION
1
14H1020
$8.99
•
Castle nut
2
LE62417
$62.99
•
Trunnion W/ 3/4” left hand Treads
Lower Front, Feed Roll with 1-1/4” Hex bore
3
E71781
$48.99
•
Shear Bar Adjuster Bolt
$11.25 ea.
Replaceable Cross Bars for, LAE35423 & LAE37237, 8 required
LE72135-R $67.99
•
RH Shear Bar Adjuster Lever RH Outside
LAE38058
$50.75
Wear Plate, Right Side
4
3
LAE42646
$929.99
Lower Front, Feed Roll With Metal Detector
5
LE72135-L
$67.99
•
LH Shear Bar Adjuster Lever LH Outside
4
LS5019
$27.69
Bearing 1” Hex Bore
6
E71782
$.59
•
Spring Pin
4a
AE46957
$67.99
Bearing 1-1/4” Hex Bore
7
E65425
$14.99
•
Pin
5
AE37068
$158.00
Smooth feed roll, lower rear To fit early 5000 series with 1” hex shaft Shaft, smooth feed roll To fit early 5000 series with replaceable 1” hex shaft 27-3/4” x 1” Hex shaft
8
E73661
$14.99
•
Pin with hex
5a
E62113
$45.00
5b
LAE42180
$270.00
5c
LAE50029
$280.00
6
LE64565
$63.75
Smooth feed roll, lower rear To fit 5440 and 5460 with factory Dura-drumTM cutterhead before 1984 Smooth feed roll, lower rear To fit 5720 & 5820 series and all 5730 & 5830 series 1-1/4” Hex 27-9/16” Long
3 6
1
4 7
AE44648
2
5
8
Muffler fits 5830, 5820 & 5400 $556.25
15
5000 Series Cutter Head 11
5000 Series Misc. Parts
717-299-3721 5
7
Part #
6
8
10
9
2
12
3 1 4
29 1
2
11
3
25
24
10
13
26 24
14
4 27
24
25
16
12 9
We also have rebuild or used gear boxes in stock! Call for pricing
24
18
6
20
8 15 28 7
5
21 22
19
20
23 17
Part #
16
1 2 3 4 5 6 7
LE66827 AT13161 JD8861 JD8884 LAE46295 JD9863 AE71361
DESCRIPTION $300.00 $6.10 $13.10 $15.88 $190.00 $12.22 $300.00
• • • • • • •
Shaft for Electric Clutch Seal Needle Bearing Needle Bearing (cap) Shaft Needle Bearing (cap) Shaft (attachment drive)
19
DESCRIPTION
1
LAE38694
$370.00
Bearing & Housing
2
LJD9307
$160.99
Bearing Asem. Only
3
LAE44466
$203.99
Shear Bar Kit
4
LAE46064
$46.99
Sharpening Stone
5
LE83035
$.60
Knife Bolt - 120 Per Drum
6
LE66536
$4.59
Knife Strap - 40 Per Drum
7
LE66678
$11.99
Knife - 40 Per Drum
8
LE66537
$5.79
Nut Bar - 40 Per Drum
9
LAE45060
$3179.99
Cutter head Drum (Only)
10
LAE36839
$25.99
Feed Roll Drive coupling sprocket - Weld on Sprocket
11
LE65763
$395.99
K. P. drive pulley mounts on cutter head pulley. (Bolts Included)
12
AE39804
Call
Part # 8 9 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
JD8819 AE38859 AE37412 E53699 AE39768 AE47004 LAE35446 E64810 E66613 E66616 AE39971 AE44867 SE12325 NB-2016D FH312157 AE35505 E15476 E36512 JD9847 E50958 E32891 E66752 JD8675
DESCRIPTION $15.88 $71.21 $90.66 $6.40 Call $1271.29 $58.99 $329.99 $608.68 $492.26 $582.67 Call $8.99 $11.99 $3.99 Call $3.99 $10.00 $2.70 $12.97 $3.99 $2.75 $103.82
• • • • • • • • • • • • • • • • • • • • • • •
Needle Bearing 21 Tooth Sprocket (#60 chain) 16 Tooth Sprocket (#80 chain) Seal Gear Box Housing (Big Half) Elec Coil Elec Clutch Armature Pc Gear Gear Gear Gear Used Housing Seal [1.25x1.63] Needle Bearing BH-2016 D Shim Drive Sprocket Shim Bearing race Thrust Bearing Pin Shim Spacer Bearing
17
5000 Series Adj. Spout
5000 Series Misc. Parts
717-299-3721
Fully adjustable spout for the John Deer 5000 series Harvester
order # LS70155
$2,500. • Kit includes Hyd. deflector motor • Ideal for loading Trucks or Wagons from rear or side
order # LS70165
• Spout will go up & down 60° • We also offer a longer center section (Great for loading trucks) *will also need 20” spout extension (LAE37337) if not already on harvester
14
16 15
4
6
5
1
3
11 13
10
8
12
9
18
7
Part #
17
8
DESCRIPTION
3
Replacement Spout for John Deere® 5000 Series
00
• Back and Side Replacement Wear Plates
2
$875.00
Part #
1 5
6
DESCRIPTION 4
1
SPR6.5
$10.60
SPRING
2
LS1132C
$532.30
SPOUT BASE
3
LS1135
$21.99
TOP WEAR PLATE
4
LS1136
$22.99
BOTTOM WEAR PLATE
5
LS1137
$24.99
SPOUT DEFLECTOR
6
LS1138
$53.99
BACK LINER
7
LS1139
$7.99
CLEAN OUT DOOR
8
LS1140
$265.31
UPPER SPOUT
7
LE67402
LAE37337
4 wheel drive Hyd. mount $36.99
20” Spout Extension, W/clean out Fits JD 5000 Series & LSC Gooseneck, 20” Long $276.99
1
LAS20
$469.99
Motor/Actuator Also Fits 6000 Series Spouts
2
LAS06
$14.99
Spring
3
LAS02
$355.99
Middle Section (Short)
3A LAS02A
$360.99
Middle Section (Long)
4
LAS07
$54.99
Middle Deflector
5
LAS08
$92.46
End Deflector
6
LAS22
$35.99
Adjuster Rod (Short)
LE36223
6A LAS22L
$36.99
Adjuster Rod (Long)
7
LAS19
$199.99
Hyd. Cylinder
8
LAS12
$77.99
Replacement Cover
Top Head Pin Fits 5000 Series $11.98
9
LAS13
$27.60
Side Spout Liner (bottom)
10
LAS14
$26.50
Side Spout Liner (top)
11
LAS24
$29.99
Auxiliary Light
12
LAS18
$15.00
Cleanout Hole Cover
13
LAS21
$85.99
Cylinder Motor Mount
14
LAS03
$27.50
Strap W/5 Holes
15
LAS04
$9.99
Strap 1’’ Wide (13’’ Long)
16
LAS05
$9.99
Strap 1” Wide (19’’ Long)
17
LAS09
$8.99
3 Hole Bracket
LS70965 Hanger Pin 3/4 x2 1/2 $9.99
2
*Call for used 10” 20” and 30” ext.
LAE46263 Big Belt Shield Fits 5000 Series. Quick pins included. $236.99
LE42792 Bottom Head Pin $16.00
LAE47021 Weight Holder $84.99
LE73887 Draw Bar Fits All 5000 Series $114.99
19
5000 Series Blower Parts #1 LAE35950
LE49027-5P
Outside Blower Panel $131.99
5 Paddle Center Plate Only
#3 LAE45967
Clean Out Door $20.99 #4 LE56053
Ring Gear $120.99
$380.00
12
7
5
11 2
8
#5 LE58022
3
1
9 6 15
#8 LAE45920
Spout Adapter Made Out of 1/4” Steel $272.99
20
Clutch Disk
5
LE51719
$129.99
Ring
2 LE51853
$189.99
Clutch Plate
6
LAE36866
$286.12
Hub
3 LAE30842 4 LAE36865
$489.39
Plate
7
LAE47003
$369.99
Cradle
$239.99
Clutch Plate
#1 LAE35686
#3 LJD9616
#6 LAE73345
#9 AE35549
Support Call
Bearing Core $45.99
Shaft $1000.00
Shaft Call
#2 LAE44484
#4
#7 LJD8195
#10 JD7446
Shaft $225.00
Used Gear Set CALL
Bearing Core
Bearing cup $29.99
16 12
#9 LAE28998
#14 LAE33650
Inside Blower Panel $125.99
Fan Paddle $23.99
17
18
14
#11 LAE33650C
#15 LE49027
#18 LAE42319
Cupped Paddle Improves Blowing $34.99
4 Paddle Fan Center $72.99
Fan Pulley (Used only) Call for Availability
#12 LE55570
#16 LE55571
Paddle Strap $5.99
Fan Angle $22.99 #17 LAE42484 K.P. Drive Pulley $250.00
#19 1½” x ½” short shoulder carriage bolt (need 3 per paddle) $.62ea. #20 ½” Lock nut $.18ea.
5 Paddle Fan Angle $29.99
$155.36
JD® 5000 Main Gear Box
Rear Blower Band $112.99
#13 LE55571-5P
1 LAE30020
7
Ring Gear Plate $$10.99 ea. #6 LE53589 Shim $4.99 #7 LE78174
13
4
Top Blower Band $96.99
LS490275 Five Paddle Kit. Includes 5 Cupped Paddles
10
$120.00
#2 LAE36535
5000 Series Clutch Parts
717-299-3721
13
#5 LJD9070
$81.99 #8 LJD8952
Bearing Core $17.77
Bearing Core $36.00
2
12
6
5
4 14
#12 E59648
9 7
4
1
3
NUT $31.99
#13 LAE29271 Arm $75.99
10
#14 AE29523
8
Bell Housing CALL
21
5000 Series Belts
6000 Low arch Spout
717-299-3721 717-299-3721 LE65863 4/ Banded Belt for JD5000 K.P. $100.00
• Fits 6000 & 7000 Series Harvesters • Your high arch spout cylinder will fit our low arch spout *Hydraulic cylinder & Electric actuator is not included in kit
10
1
9
LS70166
LAE45931 Cutter Head Drive Belt Fits All 5000 Series $70.00 ea. (requires 3)
200mm (9”) Low Arch Spout
BB81
Double Sided V Belts for JD Kernel Processor. 2 Required 8¼” top Pulley $37.00 ea.
$
5000 series Replacment ceiling Kit $222.75
00
Order #
AZ46671-21 Hay Head Drive 21 Spline
LAZ58494-A
$600.00 ea.
22
*Includes all parts shown!
11
2
11
3
2,400.00
4
5
6 15
LE75217
$2,500.
14
16
5000 to 6000 Series Adapter Frame Enables you to hook a 5000 Series harvester to any header made for a 6000 Series
$
12
13
250mm (11”) Low Arch Spout
Double Sided V Belts for JD Kernel Processor 2 Required 7¾” Pulley $35.00 ea.
5000 series floor mat, Replace your worn out floor mat with this tough ” thick rubber mat $262.04
17
LS70167
BB77
LE75217
2,200.00
11
Part#
Price
1
6SPOBAS-N
$700.00 Spout Base (9’)
1
6SPOBAS-W
2
8
Part#
Price
Description
7
6SPM-D-L-11
$29.99
Middle Def. Liner (11’’)
$745.00 Spout Base (11’)
8
6SP-E-D-L9
$21.99
End Def. Liner (9’’)
6SPOMID-N
$259.00 Middle Section (9’’)
8
6SP-E-D-L11
$24.99
End Def. Liner (11’’)
2
6SPOMID-W
$290.00 Middle Section (11’’)
9
6SPOLIN-N
$80.99
Base Liner (9”)
3
6SPOEND-NS
$183.00 End Section (9’’)
9
6SPOLIN-W
$85.99
Base Liner (11”)
3
6SPOEND-WS
$193.00 End Section (11’’)
10
6SPOMIDLIN9
$77.99
Mid Liner (9’’) by 5’11’’ long
4
6SPMDEF-N
$75.99
Middle Deflector (9’’)
10
6SPOMIDLIN11 $77.99
4
6SPMDEF-W
$84.99
Middle Deflector (11’’)
11
6SPO-COV
$17.99
Hand Hole Cover
5
6SPODEF-N
$67.99
End Deflector (9’’)
12
LAS24
$29.99
Utility Light
5
6SPODEF-W
$79.99
End Deflector (11’’)
13
6SPO-ARM.S
$24.98
Deflector Side Arm
6
6SPOELIN-NS
$42.99
Liner (9”) Short (32.5”)
14
6SPO-ARM.B
$27.99
Deflector Side Arm W/Bend
6
6SPOELIN-WS
$39.99
Liner (11”) Short (32.5”)
15
LAS20
$469.99 Motor/Actuator
6
6SPOENDLIN9
$49.99
Liner (9”) Long (47.5”)
16
6SPOROD
$34.99
6
6SPOENDLIN11 $51.99
Liner (11”) Long (47.5”)
17
LAXE23320
$294.99 Low Arch Hyd. Cyl. 13½” Pin center
7
6SPM-D-L-9
Middle Def. Liner (9’’)
17a LAZ251169
$24.99
Description
7
Mid Liner (11’’) by 5’11’’ long
Push Pull Rod
$290.00 Low Arch Hyd. Cyl. 12” Pin center
23
6000 Spout accessories
9.250
1
2
The tapered discharge deflector ensures a tighter stream of silage or haylage for greater distance when filling trucks or wagons *John Deere® only
1
JD 6000 and 7000 Series Belts for Cutterhead and KP
3 4
DESCRIPTION 2) Middle Flap Deflector 6 & 7000 Series (Narrow)
Part #
Price $66.99 $66.99 $85.99 $65.99
LAZ43832
Middle Flap Deflector For 6000 Series (Wide)
LAZ54380
Middle Flap Deflector Tapered for 6 & 7000 Series
LAZ43832T
1) End Deflector Flap For 6 & 7000 Series (Wide)
11.250
6000 KP Belts
717-299-3721
LAZ47896
End Deflector Flap For 6000 Series (Narrow)
LAZ53234
End Deflector Flap Tapered for 6 & 7000 Series
LAZ47896T
3) Middle Liner Flap Deflector 6 & 7000 Series Wide
LAZ43832L
Middle Liner Flap Deflector for 6000 Series Narrow
LAZ54380L
Middle Liner Flap Deflector for 6 & 7000 Series Tapered
LAZ43832TL
4) End Flap Deflector Liner for 6 & 7000 Series Wide End Flap Deflector Liner for 6000 Series Narrow End Flap Deflector Liner for 6 & 7000 Series Tapered
LAZ47896L LAZ53234L LAZ47896TL
$65.99 $65.99 $65.99 $65.99 $50.99 $65.99 $65.99 $45.99
2
12” pulley size = #2 belt 13.5” pulley size = #2A belt
2
2
LAZ53559 Main Drive Belt for JD for 50 Series, 6 groove 1000 RPM 2 Belts required (JD#AZ53559) 3/C247 LAZ51312 Main Drive Belt for JD 6810 thru 6910, 6 grooves 1000 RPM 2 Belts Required (Replaces J.D. #AZ51309) 3/C232
LZ56637-29 29” Spout Rest $98.00
2A
2A
$33.00ea. $16.99ea.
LAZ516398 Main Drive Belt for JD for 50 Series, 6 groove 1150 RPM 2 Belts required (JD#AZ51638) 3/C251 LAZ51309
$1100.00 Set 7 grove
Main Drive Belt for JD 6810 thru 6910, 6 grooves 1150 RPM 2 Belts Required (Replaces J.D. #AZ51309) 3/C236
Part #
4
JD 50 Series
24
B78 KP Belt to fit 6000-6950 series, left side
$875.00 set
LAZ52237
7
5
LAZ47624
JD 10 Series
Muffler Elbow Deflects Exhaust From Spout $107.99
1
$975.00 set
3
LAZ51019 Sharpening Stone Motor Fits 6000 Series SN 501958 to 504343 $549.99
KP Belt for JD 6000 thru 7500 3 Belts Required (JD #AZ39677)
1
14” Spout Rest $85.00
Muffler Elbow Deflects Exhaust From Spout $99.99
1
Call
6000 Series KP Drive
2
LZ56637
LAZ39236 Cutter Head, Hydraulic Reverser Motor Fits All 6000 & 7000 Series $1,800.00
BB74
DESCRIPTION
1
AZ39985
Call
Idler Arm
2
Z11967
$12.25
2 Grove Pulley
3
Z49898
Call
50mm Bushing
4
PULID9.X2
$19.44
KP Idler Pulley
5
Z63153
$70.40
45mm Bushing
6
Z13241
Call
Pulley
7
B78
$16.99ea.
KP Drive belt 2 required
6
25
6000 Series Kernel Processer 7
6
Order #
8
LS70186
Part #
1
2
$8,500.00
5
5
3
4 *Adjuster Motor & Brackets not included
27 10
30
11 26
A 14
29 28
31
SP194 Bearing Hub $45.50
13
#
20
26
24
19 23
Roller Brackets W/rollers, Left Hand
$222.99
•
10 Series Left Hand Channel Kit
$171.99
•
50 Series Left Hand Channel Kit
$222.99
•
10 Series Right Hand Channel Kit
$170.00
•
50 Series Right Hand Channel Kit
$24.99
•
10 & 50 Series Angle
$23.99
•
10 & 50 Series Pin
$.15
•
1.1/2” X 3/16” Roll Pin
$3.99
•
10 & 50 Series Spring
•
Saw Tooth Roll, Bottom W/ replaceable Shaft
Call
•
Left, Side Wall
4
LAZ53436
Call
•
Right, Side Wall
5
LAZ51890
$85.99
•
Top Shield
6
LAZ50686
$179.99
•
Front Cover
7
LAZ39973
$39.99
•
Top Angle
8
LZ49938
$24.99
•
Top Scraper Bar
9
LZ62347
$35.99
•
Bottom Deflector
10
LAZ39644
$104.99
•
Bottom Guard
11
LAZ51043
$104.99
•
Right Bracket
12
LAZ51044
$92.99
•
Left Bracket
13
AZ64877
$280.00
•
Idler Lever
14
LZ74697
$43.99
•
Strap
15
LHM182
$49.99
•
Extension Spring w/ nut insert
16
Z49302
$24.99
•
Rod Holder Block
17
AZ56297
$177.99
•
Top Bearing
18
LZ66751
$79.99
•
Guide Block, left side rear (when facing unit)
18a
LZ81638
$79.99
•
Guide Block, left side (when facing unit) *Wide Grove
19
LZ66766
$79.99
•
Guide Block, right side rear (when facing unit)
19a
LZ81639
$79.99
•
Guide Block, right side (when facing unit) *Wide Grove
20
AZ56298
$141.99
•
Bottom Roll Bearing
21
LAZ50472
$54.99
•
K.P. Wear Plate
22
LZ63831
$25.99
•
Front Guide Right
23
LAZ50473
$54.99
•
K.P. Wear Plate
LAZ50846
24
LZ63830
$18.00
•
Front Guide Left
Chain Hoist For 6000 Series JP
25
AZ51707
$43.71
•
Sleeve / Nut
26
LZ65314
$59.99
•
Rod
27
LZ49978
$17.99
•
Holder
28
SE17340
$9.99
•
Seal 1.75 x 2.44
29
AE42998
$56.99
•
Core & Bearing
30
LZ11975
$179.99
•
3 grove Pulley
31
SP189
$4.99
•
Cap
21
Right Hand, Cast K.P. Deflector
$54.50
B LZ12738
17
18
•
$1043.73
15 16
$181.99
LAZ53435
$54.50
M6 x 50 M10 x 50 roll pin Roll Pin
LAZ50445 LAZ50446-K LAZ51797-K LAZ50447-K LAZ51798-K LZ64366 LZ63827 Roll Pin 124424
LAZ54513
Left Hand, Cast K.P. Deflector
4
2 3 3a 4 4a 5 6 7 8
3
A LZ12739
#
Roller Brackets W/rollers, Right Hand
2
3
25
•
Saw Tooth Roll, Top W/ replaceable Shaft
B 2
$181.99
•
22
1
LAZ50444
$1043.73
5 6
1
LAZ54512
7
9
DESCRIPTION
1
12
8
6000 Series Kernel Processer
717-299-3721
$310.00
27
6000 Series Cutter Head 2
16
3
6000 Series Feed Rolls
717-299-3721 3
12 14
18 17
15
2
Corn Knife
4
5
Grass Knife
13
Aggressive Feed Roll design helps prevent feeding problems
1
7
Power Saver Knife
8
Save Power Improved Cut
11
9
8
10
13
7
10
4
11
14
9
1 Part #
28
6
6
12
5
15
DESCRIPTION
1 2 3 4 5 6 7 8 9
LAZ54524
$3349.99
•
Cutter Head, w/ replaceable shaft but no Knives & Hardware
LAZ48939
$454.99
•
RH Spherical Bearing
LZ12816
$838.61
•
RH Bearing Housing
LJD9307
$160.99
•
LAZ71139
Call
LAE38694
Part #
17
16
DESCRIPTION
1
LAZ50611SP
Call
•
Upper Front Feed Roll
Bearing Asem. Only
2
LAZ50611SPT
$51.50 ea.
•
Bolt on tooth, 8 required
•
28 tooth Sprocket (We have replaceable weld-on sprocket)
$375.99
•
Housing & Bearing w/ Lock Collar
3
LAZ50611SPFT
$42.00 ea.
• •
Flat Replaceable Crossbar, 8 required Eliminates wrapping in haylage
AZ53747
$65.00
•
Sharpening Stone; SN 504991 & Before
4
Z81671
300.12
•
Upper Front Feed Roll Shaft
AZ56626
$64.90
•
Sharpening Stone; SN 504992 & After
5
LAZ48677
$569.99
•
Upper Rear Feed Roll, Stainless Steel
LE49449
$49.00
LZ60516
$57.99
•
Upper Rear Feed Roll Shaft (37” x 32mm hex shaft)
LAZ53906
$469.99
7
LE64796
$59.50
•
Feed Roll Lift Arm Spring
10a 10b
LAZ53906HP
$605.00
Shear bar Wear Strip Kit Corn Shear bar 36mm Thick ~To fit 6650, 6750, 6850 & 6950 harvester SN. 504342 & after High Performance Shear bar (SN. 504342 & after)
6
10
• • • •
8
AZ100686
$77.50
•
Feed Roll Wear Plate RH
AZ53905
$405.00
Z65167
$61.50
•
Feed Roll Wear Plate RH (SN. 504341 & before)
AZ47614
$384.99
10
AZ100685
$77.50
•
Feed Roll Wear Plate LH
11a 11b 12 13 14 15 16 17 18
$540.00
11
Z65168
$61.50
•
Feed Roll Wear Plate LH (SN. 504341 & before)
LAZ47614HP
Grass Shearbar 36mm Thick (SN. 504342 & after) Corn Shear bar To fit 6000 series with SN. 504341 and below Hi-Performance Shear bar (SN. 504341 and below)
9
11
• • • •
AZ47613
$381.25
•
Grass Shear bar (SN. 504341 and below)
12
LAZ58444
$459.99
•
Lower Rear Smooth Roll
LZ69650
$1.79 ea.
•
Knife Bolt
13
Z13019
$199.99
•
Smooth Roll Cleaner (SN. 504341 & before)
LZ71196
$7.89 ea.
•
Bottom Nut
13a Z13356
$206.25
•
Smooth Roll Cleaner
Z63136
$17.99 ea.
•
Corn Knives
14
LAZ50090
$1129.99
•
Feed roll, lower front
LZ60535
$8.99 ea.
•
Top Strap
15
AZ51114
$93.50
•
Inside Smooth Roll Drive Coupler
LZ49622
$16.99 ea.
•
Grass Knives
16
AZ51115
$97.50
•
Outside Smooth Roll Drive Coupler
Z62076
$31.99 ea.
•
Power Saver Knife L.H.
Call
$35.00
•
14 Link Chain
$31.99 ea.
17
Z62075
•
Power Saver Knife R.H.
29
6000 Series Shields
6000 Series Transition
717-299-3721
2
9
1
3
10
11
12
5
9
13
4
4
3
6
6
7
8
5
Part # 1 2 3 4 5 6 7 8 9
8
7
DESCRIPTION Part #
LAZ52676
$80.99
•
Cutterhead Shield
LAZ39714
$65.99
•
Cutterhead Door (SN.504991 & before)
LAZ45119
$62.99
•
Cutterhead Door (SN.504991 & before)
LAZ47099
$76.00
•
Cutterhead Cover
LAZ54310
$48.72
•
Cutterhead Door (SN.504992 & after)
LZ63827 124424
$23.99
•
10 & 50 Series Pin
$3.99
•
10 & 50 Series Spring
LAZ51112
$180.00
•
Spiral Floor Plate
LAZ54323
$78.10
•
Cutterhead Door (SN.504992 & after)
3 4
#3 LAZ50457 Hay Tunnel Top Pc. Rubber & Steel strip included $101.99
2
#4 LZ61182 Hay Tunnel Top Pc. $101.99
30
14
#1 LAZ52395
#1 LAZ52500
Bottom, Hay chute 50 Series $99.99
Bottom, Hay chute 10 Series $101.99
1
#2 LZ66289 Stainless Steel Liner $81.99
DESCRIPTION
15
17
16
1 2 3 4 5 6 7
LAZ47885
$62.99
•
Guide, Rear Feed Channel
LAZ47085
$37.99
•
Feed Guide Top Flap
LAZ50114
$59.99
•
Front Blower Housing Shield
LAZ46608
$69.50
•
Blower Housing Door
LAZ43828
$46.00
•
Top Blower Housing Shield
LZ62372
$23.29
•
RH Blower Band Support Strap
LZ62966
$22.39
8
LZ58148
$65.72
• •
8a
LZ64776
$78.65
LH Blower Band Support Strap To fit all early 6000 series harvesters without quick change blower update To fit all 6000 series harvesters with quick change blower or blower update
9
LZ55782
$29.99
•
Blower Housing Cutoff Strap (6000 & 7200-7500)
10 11 12 13 13a 14 14a 15 15a 16 17
Call
$44.00
•
Blower Paddle Bolt Kit
LZ72898
$13.69
•
Blower Paddle
LE73207
$215.00
•
Spout Worm Gear
LZ64131
$207.99
•
Spout Ring Gear for 200mm spouts
LZ67194
$207.99
•
Spout Ring Gear for 250mm spouts
LZ58116
$19.04
•
Guide 4 Holes, for 200 mm Spout
LZ72114
$9.75
•
Guide 3 Holes
LAZ56941
$594.00
•
Spout Transition (50 Series) 200 mm Spout
LZ55314
$799.99
•
Spout Transition (50 Series) 250 mm Spout
LZ60500
$24.00
•
Spout Transition side wall
LAZ43830
$22.50
•
Spout Transition Inspection Door
•
31
Misc. 6000 Series Parts
Misc. 6000 Series Parts
717-299-3721
LE73884
LAZ49833
Hyd. Adapter $126.99
Cutter Head Shield $250.00
RE15644
RE33127
Metal detector box for 5000 series $1000.00
Relay box for 5000 & 6000 series Harvesters $690.00
This adapter is required to upgrade a 6000 series harvester to 4WD
RE63617
Call for price on used units
Metal detector box for 6000 series $1,200.00
LDC42009
LAZ47087
AZ48683
Cutter Head Shield To use w/ hay head $574.00
Feedroll Clutch Plate $69.99
Electric coil for 6000 Series bottom feed roll $1,775.00
AZ56805 Hyd. Clutch for 6000 series Harvester $3,500.00
AZ48683
made out of spring steel
Electric coil for 5000 Series bottom feed roll $1,075.00
LAZ39902
LAZ50680
Main Drive Belt Shield For 10 Series
Having problems with a hot engine?
Main Drive Belt Shield For 50 Series
$159.99
$190.00
LAZ50434 Harvester Side Panel
$139.99
LAZ50435 KP Deflector 129.99
$
1,600.00
Hay Head Drive Shaft LDC35876
Drive Shaft 21 spline
$321.99
LDC44953
Drive Shaft 23 spline
$300.00
•
save fuel
•
provides more usable power
for radiator cleaning
•
boost productivity
Reversible fans
Bottom Clean Out Door for KP $114.99
LAZ50684
Cleanfix® 106203-KIT
Clenfix Fan Kit for J.D. 5830 Harvester
$2,520.00
100429-KIT
Clenfix Fan Kit for J.D. 5730 Harvester
$2,520.00
100557-KIT
Clenfix Fan Kit for J.D. 6950 Harvester
$3,250.00
Call for pricing on other harvesters or tractors
Check out the Cleanfix® website at: www.cleanfix.org/home
LZ48790
Made out of ¼” Steel
Hitch Plate, 1” Thick $153.99
Harvester End
LZ48790-SP Automatic Hitch for 6 & 7K Harvesters Special Order,
$950.00
LZ48790-EX Hitch Plate, 1” Thick $174.99
LAZ58494 Replacement Frame for 6K Harvesters
32
LDC52047 LDC35875
645 Drive Shaft w/ clutch 640 Drive Shaft w/ clutch
$475.00 $550.00
1 2
124424 LZ44851
1 Spring Pin
$3.99 $32.25
2
33
630A-B + 640A-B Parts
717-299-3721
18
LDC27497 Hay Head Frame $850.00
LDC205047 Auger
16 17 14
15
21
22
Item
$2000.
00
19
5 20 12
M10 x 30 Bolt
11
23 Check out the Polly Pickup Band!!
13
8
10mm Nut
6 3
# LDC27512N
30mm Chrome arm for 630A Allows you to use #9 (LDC49073) on a 630A (will make your head last longer)
10
4
9
7
1
Description
Price
3
LDC33024
Skid Shoe, fits 630 or 640
$97.16
4
LCC44956
Left Hand Cam
$110.99
5
CC44955
Right Hand Cam
$149.99
6
LDC27512
Arm for 630A (or 7½ Ft)
$41.00
7
LDC49040
Arm for 630B L.H.
$45.00
8
E69259
Spider For 630A (or 7½ Ft)
$187.99
9
LDC49073
Spider For 630A & B + 640A & B
$239.99
10
CC48770
Bushing
$22.99 ea.
11
E54745
Pickup teeth
$4.99
12
LCA100183
Angle for 630B
$139.99
12a
LCC27506
Angle for 630A
$140.99
13
E85043P
Poly pick up band features a flexible high impact poly, which improves the life of the pickup teeth and dose not become deformed by rocks
$29.99 ea
14
CC44873
Cylinder Rod Guide (Ball Holder)
$5.99
15
Z11366
Auger Tooth
$13.99
16
CC44872
Cylinder Rod Guide (Ball Holder)
$5.89
17
Z32146
Finger Ball
$12.99
18
LH36018
Hand Hole cover
$22.99
19
LDC46805
Top Shield
$27.99
20
LCC43488
Bottom Left shield
$58.00
21
LE57986
Wear Strip L.H.
$63.99
22
LE57985 CC52031
Wear Strip R.H. ¼” C Channel
$63.99 $135.74
Description
Price
23
640A-B Parts Item
3 2
4
5
9
34
Part#
8
7
6
Part#
1
LDC205017
Auger
$2,200.00
2
LCC49490
Replacement Floor
$215.00
3
CC44955
RH Cam
$149.99
4
LCC44956
LH Cam
$110.99
5
LDC49073
Spider
$239.99
6
CC48770
Bushing
$22.99
7
LDC27512
Arm
$42.99
8
LDC204004
U Channel LH
$144.99
9
LDC204003
U Channel RH
$144.99
35
John Deere® 666 & 664 Corn Head 19
26
28
21 18
20 14
17
15
10
13 12
24 23
16
29
22
11
8
22
9 7
1
6
4 5
36
Part#
Description
Price
14
LXQ9096112
Crop Divider, Shoe
$162.99
15
LXQ9120035
Shaft
$98.99
16
XQ9120860
Bushing
$5.99
Chain (See Chain breakdown)
18
XQ9120541
Top Side Chain Guide
$30.99
19
XQ9131970
Top Gathering chain
$119.99
20
LXQ9131320
Weld on Wear strip for 666
$16.99
21
LXQ9131510
Weld on Wear strip for 666
$6.00
22
LXQ9131271
Weld on Wear strip for 666 and 664
$16.52
23
LXQ9929410
Center Weld on Wear strip for 666 and 664
$14.99
24
LXQ9121850
Sprocket w/ Splined Bore
$93.50
25
LXQ9125510
Splined hub
$30.87
26
LXQ9131851
Right Hand Wear Sheet
$85.99
26a
LXQ9131891
Left Hand Wear Sheet
$85.99
27
LXQ9927410
Bottom Shield for 666
$69.99
27a
LXQ9123280
Bottom Shield for 664
$107.99
28
LXQ9118352
Shaft
$45.76
29
XQ9116641
Cutter Disc Knife
$148.23
4 Row Breakdown
2
3
Item
Part#
Description
Price
1
LXQ9965580
Left Wing Crop Divider for 666 Corn Head
$359.99
LXQ9965590
Right Wing Crop Divider for 666 Corn Head
$359.99
LXQ9128410
Left Crop Divider for 664 Corn Head
$351.02
LXQ9128400
Right Crop Divider for 664 Corn Head
$351.02
2
XQ9099451
Flanged Bushing
$14.99
3
LXQ9109913
Left Hand Crop Divider Nose
$166.99
3a
LXQ9109933
Right Hand Crop Divider Nose
$166.99
4
LXQ9111501
L H Driver Deflector
$34.99
4a
LXQ9111511
R H Driver Deflector
$34.99
5
XQ9118260
24.3/8” Plastic Wear Strip
$16.98
6
LXQ9120220
24.3/8” Wear Strip Bracket
$35.00
7
LXQ9120090
18.1/8” Wear Strip Bracket
$39.39
8
XQ9099580
18.1/8” Plastic Wear Strip
$13.56
9
XQ9118250
20.1/2” Plastic Wear Strip
$15.99
10
LXQ9120080
20.1/2” Wear Strip Bracket
$36.99
11
LXQ9120822
Cleaner
$4.99
12
LXQ9120872
Cleaner
$17.99
13
LXQ9121990
Sprocket w/ 30mm bore + keyway
$85.99
1a
Item
17
27
25
John Deere® 666 & 664 Chains
717-299-3721
Part#
Description
Price
1
AZ51762
48 Link Gathering Chain
$99.99
2
AZ51763
50 Link Gathering Chain
$114.99
3
AZ51764
52 Link Gathering Chain
$124.99
4
AZ51765
54 Link Gathering Chain
$132.99
6 Row Breakdown 37
JD® 4 Row (conversion Head)
JD® 4 Row (conversion Head)
717-299-3721
Item
1 14 4
13
22
21
17
16
2
9
3 5
6
7
15
20
8
18
Part#
Description
Price
Needle Bearing
$19.99
15
JD10240
16
AH98118
Seal (before serial # 630000) I.D. 1.75 - O.D. 2.375
$6.10
17
AE43551
Seal (after serial # 630000) I.D. 1.75 - O.D. 2.72
$9.99
18
JD8855
Needle Bearing
$14.00
19
JD8674
Ball Bearing
$23.99
20
C3059E
Snap Ring
$4.99
21
Z9950H
Snap Ring
$6.99
22
LE63662
Gear Box Shaft (Heat treated)
$149.99
23
E74282
Knife Support RH
23
E74283
Knife Support LH
24
E74284
Knife Support Outdide
$279.99 $209.99 $175.99
5 7 19
11
23 10
Item
38
Part#
10
12 10
24
Description
Price
1
LAE45603
L.H. Top Rear Wear Plate
$111.99
1a
LAE45604
R.H. Top Wear Plate
$111.99
2
LE67061
Liner 18.5” Wear Plate Guide
$22.99
3
LE67062
Liner 32”
$31.99
4
LE74247
Bottom Wear Plate (Short)
$21.99
5
LE74297
Wear Shoe
$27.99
6
LAE45535
L.H. Cover Wear Plate
$151.99
6a
LAE45534
R.H. Cover Wear Plate
$158.99
7
LE68294
Liner (43”)
$39.99
8
LE74211
Bottom Wear Plate (Long)
$30.00
9
LAE45198
$198.99
9a
LAE45199
R.H. Cover Plate (serial # before 651001) L.H. Cover Plate (serial # before 651001)
10
AE49269
11
Chain with rollers on pins!
Item Part
Description
Qty. Price
1A
LAE44155
(108 Links-27 Lugs)
2
$295.00
$198.99
1B
LAE44156
For Serial # 651001- (112 Links-28 Lugs)
2
$305.00
Ball Joint
$24.99
LAE41722
Pittman Arm
$101.99
1C
LAE44151
For Serial # 651001- (64 Links-16 Lugs)
2
$165.00
12
LAE38172
Pittman Connector Arm
$77.99
1D
LAE44152
For Serial # 651001- (88 Links-22 Lugs)
2
$249.00
13
LE63662
Gear Box Shaft (Heat treated)
$149.99
14
AE46075
13 Tooth Hardened Sprocket
$59.99
39
JD® 3 Row (conversion Head)
New Holland® 824 Corn Head
717-299-3721 717-299-3721
1 5
#1 AE33340 26 lug Chain $199.99
2
7
#2 AE33341
6
24 lug Chain $179.99
3
#3 AE33342
4
20 lug Chain $169.99
Part#
LAE29398
Spinner For JD® 3 row $148.99
JD 2 Row (conversion Head) ®
1 2
L644107
2a 2b
856144
3
L646514
4
L646524
4a 5 6
L646525
7
L645365
644463 856145
L646523 L646360
Description
Price
Sprocket
$82.99
Shaft 10-1/8” Long Shaft 9-1/4” Long Shaft 9” Long replacement plate to weld upper crop guide onto Specify Left or Right Hand L.H. wear strip R.H. wear strip Wear Strip 27¼” long Wear Strip 8¾” long This is a weld on plate for front nose pc. Use to replace original one if it gets mangled
Call Call Call
$7.99 $39.99 $39.99 $41.99 $23.99 $25.99
#4 AE27079 2row Chain $129.99
40
Part#
Description
Price
1
640148
Chain (58 link)
$125.99
2
644591
Chain (64 link)
$145.99
3
685133
Bottom Chain(48 Link)
$106.99
L86549263
N.H. 824 to FP 230 Adapter Kit
$680.00
41
Misc. Hay Head Teeth 1
Idass Grass Head Teeth GEHAYTEE $10.99 3-3/8” OPENING SQ. BACK 9
#1
2 3
#2
GEHAYTEE306-360 $10.99 3-1/4” OPENING SQ BACK 6
#3
GHHAYTEE $10.99 2-3/4” OPENING U BACK 9
E74678
1
JD® Grass Head Teeth 7-1/2’’
$2.92
1
E54745
3
2
JD® Grass Head Teeth 7-1/2’’
3
Call
Kit to adapt a 990W to FP Drive
For NH 350 and 355
New Holland® FX, Parts
717-299-3721
#1 L86625281 27P drive bracket
NH® Rubber Teeth 3
1
990DRKKIT
$539.00 2
PICTEEMAI Maize Grass Head Teeth
$5.25 ea.
5
4 5 6
46810 BB-62072RS 46809 L86627514
7 8
6
7
#3 L86627667 27P drive Shaft
86625291
$3.19 $24.57 $12.99 $98.99
Spline Shaft
$98.60
2
1 2 3
2
$275.00 L574597
1900 and 1915 Blower Band Liner
FX Series, Adjustable Spout Fits All FX Series Harvesters
Smooth Feed Roll CALL
L840684930 Fits New Holland® FX Series $220.00
L86624827
FX Series Grass Crop Deflector 1
L84005239 — Deflector Plate
2
L84068493 — Deflector Plate
3
L8417507 — Mounting Guides
$180.00 $76.31 $81.84
L84043069 Regular Rear Hitch Fits All New Holland® FX Series
42
$37.00
1900 and 1915 Blower Band
$74.99
L9620356
Blower Paddle Fits NH® 1915; (3 Required)
L794358
1
order # L84017677
$40.50
Bottom Cutter Head Plate
New Holland FX, Parts $2,500.
Blower Cut off Plate Fits FX Series
L86505871
NH® 2100 Shoot/Door (special Order) $131.98
®
00
L84004820
$70.00 ea. Blower Paddle Cupped $26.28 ea.
L84045350
L708652
Call
Snap Ring Bearing Snap Ring Bearing Holder
Blower Arm
NH® 1900 Shoot/Door (special Order) $211.35
$14.99
5
4
L84004619
L601081
#2 L86620326 27P Brace
8
$38.00 ea.
Ware Plates
2
$41.99
Call
L84017260L
L84334020
KP Bottom Deflector for Corn Fits New Holland FX Series
$220.00
$250.00
Hay Head Arm NH® 824 Hay Head
$50.36
L84043069-A Automatic Rear Hitch Fits All New Holland® FX Series
(Special Order Only) Call For Pricing
43
NH® 360N Gathering Chains
6 Row Narrow 7
L86502834 Corn Head Chain, 92 Pitch
$309.99
8
L86502835 Corn Head Chain, 96 Pitch
$324.99
9
L86593263 Corn Head Chain, 88 Pitch
$259.99
NH® 360N Parts & Adapters
717-299-3721
#13 CHR500
We also have a kit that will allow you to connect a 360N 6 row to a JD® 6000 Harvester
Adapter kit to go from NH® 360N 3 row to JD® 3000 or 5000 Harvester
(Special order only)
$850.00
Call for pricing
CHR540
13
4 Row Narrow 4
Adapter kit to go from NH® 360N 4 or 6 row to JD® 5000 Harvester
$1200.00
7 6 5
3 Row Narrow 1
2
10
1
8 9
9
15
12
16
2 14
3
15
10
8 11 3
Part#
44
1 2 3 4 5 6 7 8 9 10 11
20
4
5
6
4
7
Description
Snap Ring
$579.66 $21.98 $87.62 $3.07
Bearing
$24.57
Bearing Holder
$98.99 $3.15 $128.38
360ND-kit
Adapter Kit, 360N-FP (All Parts Shown)
L86554060
Support
L86633811
Bracket
46810 BB-62072RS L86627514 46809 L86570486
Price
Snap ring Spline Shaft - Sprocket #60 Chain
L86631936
23 tooth Splined Sprocket
L86633816
Drive Shaft
FB-1375
Flange Bearing
$102.00 $126.00 $60.00
1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20
19
17 18
Part#
L86624588 L86624587 L86631932 L9802155 L9802154 L9802093 L86622496 L86633820 L9809311 L9620056 L86542662 L86619955 L86631939 9800740 L86633833 9822696 9843538 L86631931 L86631930
11
Description
Side Spinner Corn Head Fits all 360N Headers Spinner Teeth (takes 4) Sprocket W/ extension R.H. Wear Plate L.H. Wear Plate Center Wear Plate for NH® 360N4 & 360N6 Teeth for Auger Feed Wear Strip for 360N Wear Strip for 360N3 center row Cleaner Bearing Housing w/ hex bearing Floor for FP240, fits 360N / 3PN 14 Tooth Drive Sprocket Drive Bearing Bearing Housing Spline Shaft (for cutter Disc ) Cutter Disc 13 Tooth Idler sprocket 14 Tooth Idler sprocket
Price
$76.99 $13.99 $115.99 $24.99 $24.99 $24.99 $26.25 $31.99 $30.99 $12.00 $277.99 $75.99 $92.99 $45.99 $165.99 $354.99 $195.89 $74.99 $89.99
45
NH® 40 Blower Parts 1
Part#
5 8 2
3 7
4
L791710A
6
40 Blower Center Replacement Kit Comes Assembled & Balanced $610.53 2
4
1 2 3 4 5 6 7 8
Description
Price
L791716N
3 Paddle Center
$217.99
L791715N
Cup Paddle
$51.99
L791719N
Paddle Arm
$41.99
BLO40104A
Bottom Strap
$5.66
5/8” Carriage Bolt
$.75
5/8” Lock Nut
$.35
3/4” Machine
$.75
3/4” Lock Nut
$.50
5 1
4 11 10 12
3
9
7
3
Part#
Description
Price
1 L791715
Blower Center
$340.00
1¾ Bearing
$60.00
3 L58639
Shim
$5.50
4 L791715
Paddle
$35.00
5 L791719
Arms
$85.00
6 LHM1008
Shaft (Replaceable)
$456.00
2 BEAPB1.75
6
2 Description
Price
1
L289946
Rotor
$270.00
2
L578343
$19.33
3
L578342
$11.37
4
L86629511
Arms ¼” AR SteelPaddle Washer
5
L221481
Bolt
$13.60
6
L578277
Spinner Hopper
Call
46
2
8
1
5
Part#
NH® 40 Blower Parts
717-299-3721
3
5 4
Item 6
1 6
1 2 3 4 5 6 7 8 9 10 11 12
Part# L851536 L851532 L795413 L791922 L791923 L851539 L570709 L690309 L851541 L697866 L601416 L263818
Blower Discharge
order # LS70168
$6.90
$
Description
Price
Rear Panel Front Panel Cover Liner Blower Band Blower Discharge Clean-out Door Tie Bars Eye Bolt 5 1/4” long Eye Bolt 8" Long Hook Bolts Shim
$192.02 $156.33 $5.50 $85.00 $292.00 $497.00 $65.00 $25.00 $21.31 $18.27 $5.50 $3.50
30 Blower Band $
256.00
692.00 47
Misc. Cup Paddles
Blower Bands
717-299-3721
L289984 Cupped Paddles for N.H. 30 $45.99 ea.
NH® 900 Cutter Head
LAE37844 Cupped Paddles for J.D. 3000 Series $35.99 ea.
3
1 2
L9604054
L9610638
$
Cupped Paddles for 790, 782 $40.99 ea.
Cupped Paddles for N.H. 900 $41.99 ea. Cupped Paddles for N.H. 28 $41.99 ea. L238321 Cupped Paddles for 890 & 892 $39.99 ea.
NHTM FP230 & FP240 Parts
Part#
5
Part#
Description
Price
1
L86636978
Front Panel
$134.99
2
L86615412
Cupped Paddles
$37.99 ea. $178.99
3
L225396
Band Replaces N.H. # 86636614
4
L225387
Liner
$65.99
5
L86637313
Rear Panel FP230 &FP240
$147.99
5a L9614491
Rear Panel 900 A.S.# 781115
$210.00
5b L678912
Rear Panel 900 B.S.# 781115
$210.00
48
#3 Angle Bracket
L9828568
$39.99
2
L148113C1
Blower Band for Case IH IH, Miller Pro, & Badger 600 Blowers
$366.99
3
143746C1
Angle Arm
$51.00
Cupped Blower Paddle Fits Case IH IH, Miller Pro, & Badger
$46.99
LSC301
676997
Knife, fits: NH® 900 & NH® FP230
$75.99
86624446
Knife, fits: NH® FP230
$74.99
L781159
9617519
Shear Bar for NH® 900
$136.99
N.H. 27 & 28
9611168
Shear Bar for NH® 900
86632788
Shear Bar for NH® FP230
86632157
Shear Bar for NH® FP240
$227.99 $248.99
$44.99
$321.99
Price
$169.99
L9843189
Blower Transition Chute for Case IH IH, Miller Pro, & Badger, 600 Blowers
Description
SN. 751186 &+
#2 Shoe Pad
L143727C1
Part#
SN. 751186 & -
$144.99
Price
4 This also works on 900 Harvester
L86512471
Description
1
4
#1 Main Shoe
Replaces # 9843189 or 89820248 or 89843189
1
3
1349.99
Sliding Shoe Kit NH 340W & 350W
DIONPADDLE Blower Paddles for Dion $43.99 ea. DIONPADDLECUP Cupped Paddles for Dion $54.99 ea.
L182740
2
order # L636324
$354.99
1
4
2 3
We Also Have Blower Bands for N.H. 23 & 24 -N.H 40, Dion, Badger, and many others. If you need a Blower Band, and you don’t see it here, Give us a call, we may have it, or we may be able to make it! 717-299-3721
49
676 Adapter Plate
Header Drives
717-299-3721 1
for 684, 686, & 330 KemperTM
4
LCA77120 *We also have all parts needed to repair this adapter, Call for pricing.
$5,000.50
LCA84340-LH LCA84341-RH
LCA75930-LH LCA75931-RH
3
6
Order #
John Deere速 5000 series to KemperTM header, adapter Kit
Drum Cleaner $449.99
$219.99
2
5 #1
1
KemperTM 684 Main Frame / Gearbox
7
Item
Part#
Description LCA72673 Adapter Frame
2
LCA74872
684 LH Deflector
3
LCA74871
684 RH Deflector
4
LCA72673
Corn Head Leg
5
LCA64337
Tube will fit JD速 676 or Kempertm 4500
6
LCA69426
Gear box 676 or Kempertm 4500
7
LCA65088
Strap
$1,100.00 $36.99 $36.99 $66.99 $311.99 $1975.95 $7.99
8
19M8954
M10 X 60
$2.45
9
LCA04087
10
14M7274
Bevel nut
11
LCA53566
Eye Nut
$.80 $5.99 $4.99
688 to 6K series Adapter Frame
$1600.
$112.50
2 3
Drive for 676 JD速 or 450 Kempertm
4
1
1
AZ46668
Cross Bearing (fits all drives on this Page)
$46.99
LCA73023-21
21 - 21 Spline
2 3 4
M86290
Cam
LCA73023-23
21 - 23 Spline
M86291
Outside Clutch Spring
LCA64231
21 - 6 Spline
M86292
Inside Clutch Spring
$2.99 $1.99 $1.89
LCA72150
23 - 6 Spline
684, 686, 688, 330, Corn Head Drive
LCA76651
Wear Plate set
2
Price
LCA67656
Spring
$2000.00 #2 LS5072-S
9 8 11 10
1
LCA91232
AZ50052
21 spline
AZ50429
23 spline
$525.00 $525.00 $525.00 $525.00
$204.99 $134.99
630 Hay Head Drive
00
LCA74296-LH LCA74297-RH
50 50
Nose Support for 684 & 330 Kemper $381.99
LCA72281
21 to 23 spline
$999.99
LCA69888
21 to 21 spline
$999.99
AZ46671-21
21 to 21 spline
AZ46671-23
21 to 23 spline
$600.00 $600.0051
KemperTM 4500 & J.D. 676 1
3 4
$2,500.00 5
Item
Description
LCA66032 LCA66037 L LCA66037 R LCA64423 LCA66035 LH LCA66036 RH LCA67156 LH LCA67157 Rh
2 3 4 5
Price
Large Drum
$784.99
Hardened teeth Blade
$31.50ea.
Small Drum
$215.00
Small Drum hardened teeth Blade
$32.99 ea.
Cleaner
$11.99
6
8 2
5
7
$285.99
#1 LCA64910 Outside Skid Plate
$49.99 #2 LCA65111 - L.H. LCA65112 - R.H.
4
Wing Skid Plates
$195.99 #3 LCA71880 - L.H. LCA71879 - R.H. Center Skid Plate
$95.99
2
52
LCA69520 -R.H. Drum Shield
3
Item
FX Series, Adjustable Spout Fits All FX Series Harvesters
Part#
3
4
5
6
#5 LCA67554 Replacement Shaft to weld into spinner if the original one gets bent $62.99
#6 Bottom plate $8.00 #7 Top Plate $8.00 #8 LCA67550 - L.H.
order # L577654 1900 Series, Adjustable Spout Fits All 1900 Series Harvesters* This spout features a two stage deflector for improved control of forage placement *You will need to take the frame off of the old spout, cut it down and bolt it to the new spout.
LCA67551 - R.H. Wing Crop Driver Snout $124.99
$2,400.00
3
Description
Price
Bearing
$59.99
40M7066
Snap ring
$7.99
LCA65112
Snap ring
$10.29
LCA67316
Drive Coupler
$51.99
LCA67317
Drive Coupler
$51.99
LCA64574
Compression Spring
$15.99
JD9241
$2,100.00
#4 LCA69519 - L.H.
1
1
order # L84017677
2
Part#
1
1 2 3 4 5 6
Spouts
717-299-3721
order # CL141797 Low Arch / Waggon Spout for Class速 Harvester
53
KemperTM ChampionTM 3000 Parts
717-299-3721 4
#1 LCA56992 - R.H. LCA56993 - L.H.
Drum Rotor Fits Champion 3000, 4 row
1
2
#1 LCA57401 RH LCA57402 LH
5
$850.00
3
$$1095.00
#2 LCA55974
#2 LCA56726
Wear Plate $46.60
Weld-in Drum Rotor Repair Panel
#3 LCA67554-2
$14.99 ea.
LCA53162 - R.H. LCA53161 - L.H.
Bottom Plate $8.00
LCA66037L #3 LCA66037R
3
Rock Gard
$886.25
1
2
$32.99 ea.
#1 LCA61490 - R.H.
1
LCA61491 - L.H.
3
For more info and a complete breakdown of 3000 kemper visit our website at www.lancasterpartsandequipment.com
#1 LCA57012
2
#4 LCA67554-1
*used part pictured, call for availability
Cutting Blade 16 required
Top Plate $8.00
#5 L55608 Replacement Shaft $91.30
Idler bracket
Outside Skid Plate
$49.99
$145.99
#2 LCA56422 Spacer Strap $15.99
#3 Needed when connecting Champion 3000 onto a J.D. 5K Harvester
10 tooth Idler Sprocket
$45.36
*used part pictured, call for availability
LCA57399 RH LCA57400 LH
LCA58242
Outside crop driver $Call
Main Gearbox $6400.00
#1 DC38275
#1 LCA48952
#1 LCA49496
6 point Weld-on Drum segment 24 required
8 point Weld-on Drum segment 24 required
$15.99
$16.99
Clutch friction disc Fits Kempertm 450 6-row Drum clutch $15.99
*used part pictured, call for availability
LCA56339 16 tooth Drive Sprocket $125.00
KemperTM 4500 & J.D. 684, 686, or 688
LCA77468 = LH LCA77469 = RH
End Plate for corn head RH version pictured $645.00
Main Drive Clutch
3
1
Item 1
54
2 3
Part# LCA67184 LCA57911 LCA66024
2
Description Spring Plate 515/16� O.D. Friction Plate Main Drive Clutch Assembly
Price $27.92 $16.99 Call
LS1354 Weld on repair plate for center floor $39.42
55
Lancaster Bale Grabber
Do you have a John Deere 5000 Series Harvester?
#BG200 $2,400.00
®
Well we have the parts you need. At Lancaster Parts and Equipment, we have a large selection of donor machines for the picking. With 20 years of experience, we have the parts and knowledge you need to get the job done.
Arms are linked together. Links can be removed if free moving arms are preferred.
2’’ Cylinder Rod
J.D. 700 & 800 Tractor Hookup extra
Skid Loader Attach. included in Price
7000 series Kernel Processor
Bale Spears
1
2
J.D. 300 & 400 Tractor Hookup extra
7000 Series KP #
1 SPEARSLE
Spear Sleeve 2-1/8” round = 4¾”
Call for price and availability
$11.00
LS81504
LS81501
32” Bale Spear (Heavy duty)
49” Bale Spear (Heavy duty)
LS81505
LS81502
39” Bale Spear (Light duty)
43” Bale Spear (Heavy duty)
LS81506
LS81503
32” Bale Spear (Light duty)
39” Bale Spear (Heavy duty)
$75.00
$50.00
$47.00
56
$98.06
$83.00
LAZ64008 = RH LAZ64007 = LH 7000 K.P. Quick Conversion Guides
$180.00 ea.
$79.00
57
5000 & 6000 Series Harvesters
USED EQUIPMENT
Tractors
Harvester Heads We offer a large selection of headers. From independ to row pickup, we’ve got what you need for harvest season.
Forage Boxes
We not only have forage boxes, but also used wheels and axles.
(717) 299-3721 2008 Horseshoe Road Lancaster, PA 17602
lancasterpartsandequipment.com Hours, Monday - Friday 6:30am - 4:30pm
NON-PROFIT ORGANIZATION U.S. POSTAGE PAID LEBANON, PA PERMIT NO. 146