Landmark catalogue 2015 by Landmark Products Ltd

Park Shelters

Choose from a huge range of quality standard park shelters, modifications or custom design your own to create a unique solution, all in ready-to-install kit form.

Standard, modified and custom options for all design applications.

Info

Park Shelters

Landmarkâ&#x20AC;&#x2122;s range of park shelters includes many standard designs, sizes and options. Beyond this, we can adapt shelters with many easy modifications. We also custom design to suit site-specific applications, providing optimum solutions where required. All standard shelters have been pre-designed, drafted and engineered to a minimum wind classification of W41 (N3). They meet or exceed the National Construction Code (NCC) and relevant Australian Standards including AS 1170 Structural Design Actions, AS 1720 Timber Structures and AS 4100 Steel Structures PLUS many other relevant codes and compliances. Our in-house design and engineering teams have many years of experience that you can rely on to achieve

YOU CAN TRUST A LANDMARK PRODUCT

your desired result.

LANDMARK IS ISO 9001 CERTIFIED

We source our materials from quality suppliers who apply the

This international accreditation assures the highest quality standard of manufacture which ensures every Landmark product is consistently of the highest quality.

highest level of attention to detail, repeatability and scrutinisation to their products. We then manufacture according to our ISO 9001

LANDMARK IS BS OHSAS 18001:2007 CERTIFIED

certification, which is the highest quality standard within the industry.

This international Occupational Health and Safety Management certification is proof of our commitment to best practice.

To provide the utmost level of traceability, each and every shelter we supply carries a Landmark Traceability Plaque with a unique identification number. This allows our customers to trace and access product information easily should they ever need to maintain, upgrade or replicate an item. We place great importance on every individual component used in our products, right down to the fittings. We provide you with a choice of galvanised or stainless steel fittings, depending on the application. We also use, where possible, our proprietary stainless steel antivandal fastening system in locations that are susceptible to tampering. This fastening system not only deters vandals but has been shown to also reduce theft and destruction of the products we supply.

SOLUTIONS FOR YOUR ENVIRONMENT We design, engineer and manufacture to suit individual site specifications. We work with you to select the most appropriate materials for the application, location, environment and budget for the best possible outcomes.

LESS ON-SITE DISTURBANCE Our park shelters are prefabricated and supplied in kit form guaranteeing less on-site disturbance, less noise and increased site safety.

ROBUST ENGINEERING We design, engineer and manufacture often above industry standards, to suit environmental conditions and with consideration for high level public use. We are proud of our products and offer a 10 year limited structural warranty.

Landmark shelters are prefabricated and supplied in flat pack kit form. The community benefits from shorter construction times and reduced noise pollution and increased on-site safety. We have local staff in offices throughout Australia and New Zealand who understand that each shelter has different requirements depending on location, community values, heritage, terrain and intended use. Ensuring a successful outcome for the community is an

STAINLESS STEEL ANTI-VANDAL FASTENING SYSTEM Our fastening system deters vandalism and can reduce the incidence of theft and destruction.

TRACEABILITY PLAQUE Every structure we supply carries an individual serial number to ensure all product specification history is easily available for any maintenance requirements.

important step in each project and is of paramount importance to us.

Info

Shelter Footings

BOLT DOW

TIMBER POST FOOTING VERSIONS

STANDARD SHELTER FOOTINGS

TIMBER POST FOOTINGS

Landmark has a huge range of standard

STEEL POST FOOTING VERSIONS

pre-designed shelters. They are designed in flat pack kit form for reduced on-site

TIMBER POST LEAF

disturbance and easy installation. The footings standard to each series are listed

STEEL SUPPORT TIMBER POST FOOTING VERSIONS BOLT DOWN TO SLAB

under the Standard Options column on each

IN GRO

GROUND LEVEL

shelter series page. The diagrams (beside and below) illustrate the standard timber

BOLT DOWN

and steel footings available across our extensive range of standard shelters.

CONCRETE SLAB

SLAB THICKENING

Should your project require it we can also

BOLT-DOWN TO SLAB

provide you with a custom solution.

CONCRETE FOOTING

IN-GROUND

Speak to your local Project Consultant about your individual needs.

BOLT BELOW

STEEL POST FOOTINGS

IN GROUND

STEEL POST FOOTING VERSIONS

STEEL POST GROUND LEVEL

STEEL POST

CONCRETE SLAB

SLAB THICKENING

BOLT-DOWN TO SLAB

IN GRO

GROUND LEVEL

BOLT DOWN TO SLAB

Bolt below ground

CONCRETE FOOTING

BOLT-BELOW SLAB

IN-GROUND

K650/K660 KING CANTILEVER ONLY

BOLT BELOW SLAB

IN GROUND

TIMBER BOLT-DOWN TO SLAB WITH ANTI-VANDAL FASTENING SYSTEM TO POSTS

TIMBER FRAMEWORK WITH IN-GROUND FOOTINGS

Info

UVCP Principles

UVR Exposure Management

UVCP - ULTRA VIOLET AND CLIMATE PROTECTION WHAT ARE THE UVCP PRINCIPLES? UVR - ULTRA VIOLET RADIATION EXPOSURE MANAGEMENT • •

Skin Protection

Skin Protection Early Childhood UVR Exposure Minimisation

WET WEATHER •

Wet Weather Event Protection - Hail and Driving Rain

PROTECTIVE ELEMENTS •

Community Shade Zoning (Bus Stops and Movement Paths)

•

Sporting Ground Shade Management

Weather Protection

Sporting Ground Shade Management

MOR

NING

NOO

Early Childhood UVR Exposure Minimisation

RN FTE

A Shade Modelling can ensure that your shelter is designed to maximise available shade throughout the day anywhere across Australia and New Zealand.

Community Shade Zoning

Contents

PARK SHELTERS INFORMATION Information

| Park Shelters

Information

| Shelter Footings

Information

| UVCP Principles

STANDARD SHELTER DESIGNS K100 Sherbrooke

Fish Cleaning Stations |

K190 Angelsea

Gazebo

K200 Goulburn

Skillion Roof - Timber |

K300 Peninsula

Pyramid Roof

K400 Portland

Marquee Roof

K500 Mulgrave

Curved Roof

K600 Cardwell

Wave Roof

K620 Byron

Skillion Roof - Steel

K630 Whyalla

Aluminum

K640 Avalon

Cantilever

K650 / K660 King

Bus Shelters

K700 Bathurst

Gable Roof

PARK SHELTER ELEMENTS

Materials & Finishes

Solar LED Lighting

Custom Designs

Gable Roof Shelters

Multi-purpose.

K100 Series - Sherbrooke Picnic Gable roof shelters are the most common design used to complement any park or urban environment. Compact and versatile, they are perfect over notice boards, seating, barbecues and individual picnic settings.

Gable Roof Shelters

STANDARD OPTIONS Steel posts with steel roof frame (K105) Steel posts with pine roof frame (K103 & K104) Powder coating or two-pack epoxy paint for steel posts and roof frame Thermoplastic coatings for steel posts Pine posts with pine roof frame (K103 & K104) Hardwood posts with pine roof frame (K103 & K104) Timber colour stain for pine and hardwood Painted colour for pine Galvanised brackets Stainless steel fixings In-ground or bolt-down posts

STANDARD GABLE ROOF SHELTERS

Colorbond 速 XRW or Ultra Grade roofing

Our standard size shelters can provide enough space for a range of different seats, picnic settings, notice boards or barbecues. If grouped

Gutters and downpipes to match roof type

together these shelters provide space for larger gatherings or facilities.

Information boards in timber or aluminium

Landmark can also custom engineer, manufacture and install to suit

MODIFICATIONS

your site-specific application, providing the optimum solution. All Landmark park shelters are prefabricated, supplied in flat pack kit

Screens, finials and infill pickets

form with instructions and engineering certificates to meet all relevant Structural rating upgrades beyond N3 (W41)

building codes and Australian Standard requirements.

Standard size variations

CUSTOM SOLUTIONS Speak to your local Project Consultant about your individual needs 2160 25

K103

2190

2100

K104

2.2m x 2.2m

K100 SERIES - SHERBROOKE - GABLE ROOF SHELTERS 3500m

3500m

K103 K103

2190

2100 2100

x 3.5m K104 x 3.5m K104 3.6m3.6m

2.2m x 2.2m 2.2m 2.2m

* Green arrows indicate roof fall.

6 20

2700

2100

3600

2160

K105

3.1m x 2.7m

2700

3050

2160

3.6m x

Fish

Cleaning Stations

Practical and hygienic.

K190 Series - Angelsea Fish cleaning stations for fresh or salt-water marine environments provide a convenient, functional and hygienic solution for anglers to clean their catch.

Fish

Cleaning Stations

STANDARD OPTIONS Hardwood posts with pine roof frame Timber colour stain for pine and hardwood Galvanised brackets Stainless steel fixings In-ground or bolt-down posts Colorbond 速 XRW or Ultra Grade roofing Gutters and downpipes to match roof type

MODIFICATIONS Screens, finials and infill pickets Stainless steel brackets Plumbing and water tap variations Structural rating upgrades beyond N3 (W41) Standard size variations

CUSTOM SOLUTIONS Speak to your local Project Consultant about your individual needs

STANDARD FISH CLEANING STATIONS These standard designs provide enough space for multiple users.

All Landmark shelters are prefabricated, supplied in flat pack kit form

They are available with or without a roof and with many other options

with instructions and engineering certificates to meet all relevant

to cover a wide range of applications. They can also be modified

building codes and Australian Standard requirements.

according to more specific requirements. Landmark can also custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution.

K190 SERIES - ANGELSEA - FISH CLEANING STATIONS 100 100 700 700 100 100

22452245

x 0.9m K1912.2m2.2m x 0.9m K191

* Green arrows indicate roof fall.

K1922.2m2.2m x 2.5m K192 x 2.5m

2460

2100

900

1200

1200 1000

1000

22452245

Gazebo Roof Shelters

Traditional focus.

K200 Series - Goulburn Our gazebo roof shelters can create a focal point for any community. From traditional to modern design options they can fit into any landscape.

Gazebo Roof Shelters

STANDARD OPTIONS Steel posts with pine roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for steel Pine posts with pine roof frame Hardwood posts with pine roof frame Timber colour stain for pine and hardwood Painted colour for pine Galvanised brackets Stainless steel fixings In-ground or bolt-down posts

STANDARD GAZEBO ROOF SHELTERS

Colorbond 速 XRW or Ultra Grade roofing

These standard designs provide ample space for large gatherings.

Gutters and downpipes to match roof type

Gazebos provide coverage for special events and celebrations such as weddings, band performances and local community announcements.

MODIFICATIONS

Our standard designs include many options to cover a wide range of situations or the design can be modified to more specific requirements.

Baluster and frieze panels, finials and cupolas

Landmark can also custom engineer, manufacture and install to suit Structural rating upgrades beyond N3 (W41)

your site-specific application, providing the optimum solution.

Standard size variations

All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant

CUSTOM SOLUTIONS

building codes and Australian Standard requirements.

Speak to your local Project Consultant about your individual needs

3942

2100

K201 3.9m Diameter K200 SERIES - GOULBURN - GAZEBO ROOF SHELTERS 3942

3942

5678

7000

5678

5.6m Diameter K202K202 5.6m Diameter

7000

10 25

7000

2100

3.9m Diameter K201K201 3.9m Diameter

K203

7.0m Diameter

Skillion Roof Timber Shelters

Contemporary timber.

K300 Series - Peninsula A contemporary design utilising the natural beauty of timber. The clean lines of the skillion roof complement any park or urban environment. With a huge range of standard sizes, we can cater to your shade requirements.

Skillion Roof Timber Shelters

STANDARD OPTIONS Pine or hardwood posts with pine roof frame Timber colour stain for pine and hardwood Painted colour for pine

STANDARD SKILLION ROOF TIMBER SHELTERS

Rebated front screen

Skillion roof shelters are commonly used to create a modern look and

Stainless steel fixings

feel, while the huge size range is useful to meet a large variety of

In-ground or bolt-down posts

shade requirements. The timeless timber finish provides a softer, more

Colorbond 速 XRW or Ultra Grade roofing

Galvanised brackets

blended appeal in parklands, while providing the best defence against

Gutters and downpipes to match roof type

harsh corrosive environments. All timber skillion roof shelters come standard with rebated screening of the high-pitched side to maximise

MODIFICATIONS

airflow, shade and comfort in all weather conditions. The standard

Rebated side screens and baluster panels

designs include many options to cover a wide range of situations or

Removal of centre post or centre row of posts

the design can be modified to more specific requirements. Landmark

Structural rating upgrades beyond N3 (W41)

can also custom engineer, manufacture and install to suit your sitespecific application, providing the optimum solution.

Standard size variations

All Landmark shelters are prefabricated, supplied in flat pack kit form

CUSTOM SOLUTIONS

with instructions and engineering certificates to meet all relevant

Speak to your local Project Consultant about your individual needs

building codes and Australian Standard requirements.

3000

2100

K301 3.0m x 3.0m K300 SERIES - PENINSULA - SKILLION ROOF TIMBER SHELTERS 3000 3000 4000

10 10

5000

4000 4000 10 10

5000 5000 6000 6000 10000

10 10

8000 8000 10 10

2100 2100

8000 8000 10 10

* Green arrows indicate roof fall.

K307 K307 K308

10.0m 10.0mxx6.0m 6.0m 10.0m 10.0m xx 8.0m 8.0m

2100 2100

10000 10000 10000 10000

2100 2100 2100 2100

10000 10000

2100 2100

10 10

10.0m 10.0m xx 6.0m 6.0m

8.0m 8.0mxx8.0m 8.0m

6000 6000 8000 8000 10 10

10 10

K306 K306

10.0m x 4.0m 8.0m 8.0mxx6.0m 6.0m 8.0m 8.0m xx 8.0m 8.0m

6000 6000

K307

8000 8000 8000 4000 8000

2100

K304 K305 K305 K306

5.0m x 5.0m 10.0m x 4.0m 8.0m 8.0m xx 6.0m 6.0m

2100 2100 2100 2100

4000 8000 8000 5000

2100 2100

5000

2100 2100

10 10

K303 K304 K305

5000

6000 6000 10000 10000 8000 8000

10 10

K304

5.0m x 5.0m

8000 8000

10 10

2100

K303

4.0m x 4.0m

K308 K308

10.0m 10.0mxx8.0m 8.0m

10000 10000

K302

3.0m x 3.0m 4.0m x 4.0m

4000

4000 3000

2100

2100 2100

3000

K301 K302

K302

Pyramid Roof Shelters

Classic styling.

K400 Series - Portland A classic, versatile design that has set the standard for many years. Available in a range of sizes and options pyramid roof shelters are a popular choice.

Pyramid Roof Shelters

STANDARD OPTIONS Pine or hardwood posts with pine roof frame Timber colour stain for pine and hardwood Painted colour for pine Steel posts with pine roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for steel Galvanised brackets Stainless steel fixings In-ground or bolt-down posts Colorbond 速 XRW or Ultra Grade roofing Gutters and downpipes to match roof type

STANDARD PYRAMID ROOF SHELTERS

MODIFICATIONS

Pyramid shelters have a classic design style that has set the standard for many years. With a great selection of standard and modified

Baluster and frieze panels, finials and cupolas

options to choose from we can provide you with a shelter that will

Structural rating upgrades beyond N3 (W41)

blend seamlessly into any space. Landmark can custom engineer,

Standard size variations

manufacture and install to suit your site-specific application, providing the optimum solution.

CUSTOM SOLUTIONS

All Landmark shelters are prefabricated, supplied in flat pack kit form Speak to your local Project Consultant about your individual needs

with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

2850 25

2850

2100

K401 3.0m x 3.0m K400 SERIES - PORTLAND - PYRAMID ROOF SHELTERS 2850 2850

4045 4045

25 25

K402 6000

25 25

x 3.0m K401 3.0m x 3.0m K401 3.0m

K402 K402 4.0m 4.0mx x4.0m 4.0m 6000 6000

25 25

6000 6000

14 2100 2100

2100 2100

2100

K403

6.0m x 6.0m

6000

2850 2850

2100 2100

4045 4045

Marquee

Large Shelters

Largely universal.

K500 Series - Mulgrave Large shelters with variations in roof designs and size options to give you ultimate flexibility for creating the perfect shelter and providing expansive shade. Offering convenience and protection from the elements for big gatherings and community events.

Marquee

Large Shelters

STANDARD OPTIONS Steel posts with pine roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for steel Pine or hardwood posts with pine roof frame Timber colour stain for pine and hardwood Painted colour for pine Galvanised brackets Stainless steel fixings In-ground or bolt-down posts Colorbond 速 XRW or Ultra Grade roofing Gutters and downpipes to match roof type

MODIFICATIONS Baluster and frieze panels, finials and cupolas

STANDARD MARQUEE LARGE SHELTERS

Decorative gable infill pickets (K503 only)

Marquee shelters are designed to provide generous sizing options with

Extra bay extensions

various roof styles. Large shelters offer flexibility to keep bigger groups

Information boards in timber or aluminium

together in the one space and are perfect for celebrations, holding local community events or family gatherings. Our marquee shelters

Structural rating upgrades beyond N3 (W41)

come with both size and roofing style options as standard. Landmark

Standard size variations

can also custom engineer, manufacture and install to suit your site-

CUSTOM SOLUTIONS

specific application, providing the optimum solution.

Speak to your local Project Consultant about your individual needs

All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K500 SERIES - MULGRAVE - MARQUEE LARGE SHELTERS 6000 6000 6000 6000

25 25

2100 2100

10.2m x 5.5m K504 10.2m x 5.5m K504 10.2m x 5.5m K504 10.2m x 5.5m K504

* Green arrows indicate roof fall.

10160 10160

2100 2100

7270 7270 7270 7270

10160 10160

5505 5505 5505 5505

55005500

K503 6.0m6.0m x 5.5m K503 x 5.5m K503 x 5.5m K503 6.0m6.0m x 5.5m

5500 5500

K502 7.0m7.0m x 5.5m K502 x 5.5m K502 x 5.5m K502 7.0m7.0m x 5.5m

2100 2100 2100 2100

55005500

5505 5505

2100 2100 2100 2100

5500 5500

55055505

25 25

7000 7000 7000 7000

25 25

2100 2100

7.2m7.2m x 5.5m K505 x 5.5m K505 x 5.5m 7.2m7.2m x 5.5m K505 K505

Curved Roof Shelters

A relaxed modern appeal.

K600 Series - Cardwell Curved roof shelters offer a relaxed, modern appearance. With a strong, all-steel structure and a range of standard size options, these shelters can enhance everything from smaller notice boards and single seats to multiple picnic settings with larger barbecue facilities.

Curved Roof Shelters

STANDARD OPTIONS Steel posts with steel roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for steel Galvanised brackets Stainless steel fixings In-ground or bolt-down posts Colorbond 速 XRW or Ultra Grade roofing Gutters and downpipes to match roof type Information board standard (K604)

MODIFICATIONS Pine or harwood posts

STANDARD CURVED ROOF SHELTERS

Information boards, baluster, frieze panels and finials

Curved roof shelters provide a subtle design difference that is modern and has a gentle linear appeal. Combining multiple curved shelters at

Structural rating upgrades beyond N3 (W41)

various angles creates a unique, attractive and uplifting presence in

Standard size variations

any park or urban space. With a strong, all-steel structure and range

CUSTOM SOLUTIONS

of standard sizes these shelters can enhance everything from single seat areas to larger barbecue facilities with multiple picnic settings.

Speak to your local Project Consultant about your individual needs

Landmark can also custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution. All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K600 SERIES - CARDWELL - CURVED ROOF SHELTERS 3900 3900

3650

3900

3650

3900

6400

2100

6.4m x 5.7m K603K603 6.4m x 5.7m K603 K603 6.4m x 5.7m 6.4m x 5.7m

* Green arrows indicate roof fall.

3700

3700 3700

K602 K602 3.9m x3.9m 3.7mx 3.7m K602 3.9m x 3.7m K602 3.9m x 3.7m 3050 3050

3050 6400

2100

6400

57005700

2100

2100 2100

K604 K604 3.1m x3.1m 2.7mx 2.7m K604 x 2.7m K604 3.1m 3.1m x 2.7m

3050

2700 2700

6400

2100

3700

3.7m x 2.0m 3.7m x 2.0m K601K601 3.7m x 2.0m K601 K601 3.7m x 2.0m

2100

2700

2100

2000

2100

5700 5700

2100

20002000

2100

2000

3650

2700

3650

Wave Roof

Shelters

Alluring and tranquil.

K620 Series - Byron Wave roof shelters exude tranquility with a pleasing profile. With a strong all-steel structure and the ability to be combined in a variety of possible configurations, wave shelters can create that special place in any environment.

Wave Roof Shelters

MODIFICATIONS Pine or hardwood posts

STANDARD WAVE ROOF SHELTERS

Baluster and frieze panels

Wave roof shelters provide a unique design that creates a calming,

Structural rating upgrades beyond N3 (W41)

tranquil feel. One shelter can easily transform any community space

Standard size variations

into a special spot and when combined together, wave roof shelters create the ultimate in design, look and feel. With a strong all-steel

CUSTOM SOLUTIONS

structure and range of standard sizes, they are the supreme shading structure. Landmark can also custom engineer, manufacture and install

Speak to your local Project Consultant about your individual needs

to suit your site-specific application, providing the optimum solution. All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K620 SERIES - BYRON - WAVE ROOF SHELTERS

2100 2100 2100 2100

K622 K622 K622 K622

3.8m 3.8mxx4.3m 4.3m 3.8m 3.8mxx4.3m 4.3m

3.8 3.8xx4.4m 4.4m 3.8 3.8xx4.4m 4.4m

4400 4400 4400 4400

5340 5340 5340 5340

K623 K623 K623 K623 20

3.8m 3.8mxx5.3m 5.3m 3.8m 3.8mxx5.3m 5.3m

* Green arrows indicate roof fall.

2100 2100 2100 2100

3830 3830 3830 3830

2100 2100 2100 2100

K624 K624 K624 K624

3.8m 3.8mxx4.4m 4.4m 3.8m 3.8mxx4.4m 4.4m

3830 3830 3830 3830

K621 K621 K621 K621

3830 3830 3830 3830

2100 2100 2100 2100

4400 4400 4400 4400

3830 3830 3830 3830

4300 4300 4300 4300

Skillion Roof Steel Shelters

Modern steel.

K630 Series - Whyalla A modern design with a strong all-steel structure, providing a contemporary feel for any park or urban environment. Steel shelters provide robust anti-vandal performance.

Skillion Roof Steel Shelters

MODIFICATIONS STANDARD SKILLION ROOF STEEL SHELTERS

Baluster panels and screens

Skillion roof shelters are commonly used to create a modern look and

Structural rating upgrades beyond N3 (W41)

feel. The standard size range is useful for a large variety of shade

Standard size variations

requirements. The strong finish of an all-steel structure provides a

CUSTOM SOLUTIONS

huge range of options for multiple combinations. Blending seamlessly in all community parklands and urban environments. Standard designs

Speak to your local Project Consultant about your individual needs

are available with many options to cover a wide range of applications, or they can be modified according to more specific requirements. Landmark can also custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution. All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K630 SERIES - WHYALLA - SKILLION ROOF STEEL SHELTERS 5000 5000

K631 K631

K632 K632

4.0m x 4.0m 4.0m x 4.0m

5000 5000

4000 4000

2100 2100

4000 4000

5.0m x 5.0m 5.0m x 5.0m

K633 K633 22

6.0m x 6.0m 6.0m x 6.0m

* Green arrows indicate roof fall.

K634 K634

6000 6000

2100 2100

8000 8000

6000 6000

2100 2100

6000 6000

8.0m x 6.0m 8.0m x 6.0m

Aluminium Shelters

Low maintenance versatility.

K640 Series - Avalon Variations in roof designs and size options gives you supreme flexibility for selecting the look and feel that you desire. Aluminium is lightweight, naturally anti-corrosive and has a variety of finishes to provide the ultimate look for a perfect low maintenance option in harsh, corrosive environments.

Aluminium Shelters

STANDARD OPTIONS Aluminium posts with aluminium roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for aluminium Stainless steel brackets and fixings In-ground posts Colorbond 速 XRW or Ultra Grade roofing Gutters and downpipes to match roof type Aluminium screens

STANDARD ALUMINIUM SHELTERS

MODIFICATIONS

Aluminium shelters are commonly used for their low maintenance qualities in harsh environments - such as coastal beach fronts or

Baluster panels and screens

where maintenance is complicated due to distance or accessibility. Standard designs are available with screening of the high-pitched

Structural rating upgrades beyond N3 (W41)

side to maximise airflow, shade and comfort in all weather conditions.

Standard size variations

Alternatively, other options cover a range of applications or can be

CUSTOM SOLUTIONS

modified to suit specific needs. Landmark can also custom engineer, manufacture and install to suit your site-specific application, providing

Speak to your local Project Consultant about your individual needs

the optimum solution. All Landmark shelters are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K641

K640 SERIES - AVALON - ALUMINIUM SHELTERS

* Green arrows indicate roof fall.

43004300

4000

2100

4300

K646

4000

2100

5000

2100

K6425.0m5.0m x 5.0m K642 x 5.0m

24 2100

2100

4000

K6414.0m4.0m x 4.0m K641 x 4.0m

4.0m x 4.3m

2100

K642

4.0m x 4.0m

50005000

4000

2100

40004000

4000

2100

4000

Cantilever Steel Shelters

Views and accessibility.

K650/660 Series - King With a strong all-steel structure and modular capabilities, our cantilever shelters are the perfect choice to provide a comfortable shaded area with easy access and uninterrupted views.

Cantilever Steel Shelters

STANDARD OPTIONS Steel posts with steel roof frame Powder coating, two-pack epoxy paint or thermoplastic coatings for steel

STANDARD CANTILEVER STEEL SHELTERS

Timber post infills

Cantilever shelters offer a distinctly modern style combined with easy

Stainless steel brackets and fixings

access around their structure due to their simple two-post design.

Bolt-below slab installation only

This design is the absolute choice when a commanding view is the emphasis of the space such as with coast lines, headlands, wetlands,

Colorbond ÂŽ XRW or Ultra Grade roofing

water ways, sporting ovals and the like. Landmarkâ&#x20AC;&#x2122;s cantilever shelters

Cooldek insulated roof (K660)

are designed as modular units and can easily be built alongside each

Gutters and downpipes to match roof type

other to provide a longer shelter. Standard roofing options include either XRW corrugated orb (K650) or 50mm insulated Cooldek

MODIFICATIONS

panel (K660) that provides cooler shading, cleaner lines and is low

Baluster panels and screens

maintenance. The standard cantilever range also has many options to cover a wide range of applications, or can be modified according to individual requirements. Landmark can also custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution. All Landmark shelters are prefabricated, supplied in flat pack kit form

Structural rating upgrades beyond N3 (W41) Standard size variations

CUSTOM SOLUTIONS Speak to your local Project Consultant about your individual needs

with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

K650/660 SERIES - KING - CANTILEVER STEEL SHELTERS

x 4.0m 4.0m x 4.0m 4.0m x 4.0m 4.0m 4.0m x 4.0m 4.0m 4.0m x 4.0m x 4.0m 4.0m 4.0m x 4.0m x 4.0m

x 6.0m 6.0m x 6.0m 6.0m x 6.0m 6.0m 6.0m x 6.0m 6.0m 6.0m x 6.0m x 6.0m 6.0m 6.0m x 6.0m x 6.0m

x 4.0m 6.0m x 4.0m 6.0m x 6.0m 4.0m 6.0m x 4.0m 6.0m 6.0m x 4.0m x 4.0m 6.0m 6.0m x 4.0m x 4.0m

x 6.0m 4.0m x 6.0m 4.0m x 4.0m 6.0m 4.0m x 6.0m 4.0m x 6.0m 4.0m x 6.0m 4.0m 4.0m x 6.0m x 6.0m

x 4.0m 4.0m x 4.0m 4.0m x 4.0m 4.0m 4.0m x 4.0m 4.0m 4.0m x 4.0m x 4.0m 4.0m 4.0m x 4.0m x 4.0m

x 6.0m 6.0m x 6.0m 6.0m x 6.0m 6.0m 6.0m x 6.0m 6.0m 6.0m x 6.0m x 6.0m 6.0m 6.0m x 6.0m x 6.0m

x 4.0m 6.0m x 4.0m 6.0m x 6.0m 4.0m 6.0m x 4.0m 6.0m 6.0m x 4.0m x 4.0m 6.0m x 4.0m 6.0m x 4.0m

* Green arrows indicate roof fall.

x 6.0m 4.0m x 6.0m 4.0m x 4.0m 6.0m x 6.0m 4.0m 4.0m x4.0m 6.0m x 6.0m 4.0m 4.0m x 6.0m x 6.0m

Bus

Shelters

Practical passenger shelters.

K700 Series - Bathurst Our bus shelters are designed to benefit the public waiting for transport in a safe, protected environment. Located close to roadsides, they are usually a slimline design to allow for sidewalk placement and accessibility.

Bus

STANDARD OPTIONS

Shelters

Pine or hardwood posts with pine roof frame (K701) Timber colour stain and painted colour for pine (K701) Steel posts with steel roof frame (K703) Powder coating, two-pack epoxy paint or thermoplastic coatings for steel (K703) Steel mesh side and rear screens (K703) Galvanised brackets and fixings In-ground or bolt-down posts Colorbond 速 XRW or Ultra Grade roofing (K650) Gutters and downpipes to match roof type

MODIFICATIONS Timber colour stain for hardwood (K701) (painting not recommended for hardwood) Screen material variations: polycarbonate, aluminium perforated steel or glass Stainless steel brackets and fixings Structural rating upgrades beyond N3 (W41) Standard size variations Seating options

CUSTOM SOLUTIONS Speak to your local Project Consultant about your individual needs.

STANDARD BUS SHELTERS The standard bus shelter designs are great solutions for providing enough space for multiple users waiting for public transport. Designed using crime prevention methods (CPTED) for low maintenance and high safety means they are the perfect choice for public use. The range has a design in steel for a modern look and in timber to

your site-specific application, providing the optimum solution.

suit more traditional locations. Both designs can be modified to allow many different options to cover a wide range of applications, or can be

All Landmark shelters are prefabricated, supplied in flat pack kit form

modified according to further individual requirements.

with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

Landmark can also custom engineer, manufacture and install to suit

K700 SERIES - BATHURST - BUS SHELTERS 37003700

K701 x 2.9m K701 3.7m3.7m x 2.9m * Green arrows indicate roof fall.

K703 K703 x 1.6m 2.6m2.6m x 1.6m

1570

2100

2900

26002600

2900

2100

Materials & Finishes We source our materials from quality suppliers who provide attention

We use many other materials such as composites, plastics, glass,

to detail, repeatability and high scrutinisation of their products.

stainless steel, concrete and other timber species for varying

We then manufacture accordingly to achieve the industry’s highest

applications. With park shelters we can use a range of structural

quality time after time as ensured by our ISO 9001 certification.

materials, baluster and frieze panels and screen options, finials and

Our pine is environmentally-friendly plantation sourced and is stabilised and treated with Light Organic Solvent Preservatives (LOSP)

cupolas and decorative gable infills to cover a wide range of solutions for individual requirements.

to provide protection from insects and decay. It can be stained or

We choose to give the highest level of concern to our fittings and

painted to further enhance it’s life, durability and appeal.

provide a choice of galvanised or stainless steel depending on the

Our hardwood is select-grade and sustainably-harvested western Queensland hardwood or similar stress grade F17 or better. It is treated with Ammoniacal Copper Quaternary (ACQ) for protection from insects and decay, which can be stained. We don’t recommend

application. We also use, where possible, our proprietary stainless steel anti-vandal bolts in locations that are susceptible to tampering as they not only deter vandals but, have been found to actually reduce the theft and destruction of the park shelters we supply.

painting on hardwood because it releases natural tannins from the timber and diminishes the look of the finished paintwork. We use Rosewood for our timber screening, it’s attractive, long lasting and can be finished with stains to further enhance the durability. According to your requirements we can also use other types of timber species and finishes. Our steel is structural-grade and hot-dip galvanised as per AS/NZ 4680 for superior performance. It can then be powder coated

TIMBER PAINT COLOURS

PINE STAINS

to provide a hardwearing protective coating, which is attractive and comes in many colour options. For a higher level of corrosive protection from the elements, we recommend using two-pack epoxy paint or thermoplastic coatings over galvanised steel structures. Aluminium is also a structural grade and usually chosen for its excellent corrosive properties for those locations that are harshly

EPOXY / TWO PACK COLOURS HARDWOOD STAIN

affected, but due to the relatively lower strength (approximately 30% that of steel) there are some design issues that limit its use. Aluminium can be powder coated or anodised providing an attractive finish that comes in many colours, both two-pack paint and thermoplastic coatings can also be used to further enhance its natural anti-corrosive abilities. POWDER COAT OPTIONS

WPC COLOUR SELECTION

Solar LED

Lighting System

Power to save.

K800 Series - Lighting System Landmarkâ&#x20AC;&#x2122;s K800 Lighting System range of off grid solar lights are the perfect choice for shelters, restrooms and public places.

Solar LED

Lighting System

STANDARD INCLUSIONS 80 Watt poly crystalline solar panel Vandal resistant light case enclosing the LED light 12 volt light at 1.6 Amps and 6000K, manufactured to last over 8 years. (30,000 hours service x 10 hours per day) 12 volt 10 Amp dawn to dusk and hour setting micro controller Maintenance free low discharge gel battery

STANDARD SOLAR LED LIGHTING SYSTEM

12 volt blade fuse holder

Landmarkâ&#x20AC;&#x2122;s K800 Lighting System range of off grid solar lights are the

IP65 battery enclosure

perfect choice for shelters, restrooms and public spaces.

Tamper proof screws

12 volt solar light systems remove the necessity to run mains power at high costs, decrease power consumption and increase safety.

CUSTOM SOLUTIONS

High quality solar panels from a leading world manufacturer are matched with gel batteries for a superior charging performance.

Speak to your local Project Consultant about your individual needs.

The strong and resilient cased light is vandal resistant. The LEDs emit a 6000 Kelvin natural light and the low power draw of LEDs relieves the high technology battery of high loading. The micro controller has easy time adjust ability and is fused in the battery enclosure providing a safe reliable system. Solar LED light systems are a superior solution, using cost free solar energy to provide safe utilisation of community areas and amenities.

K800 SERIES - LIGHTING SYSTEMS 00 0 1m m 1m 2m m 2 2m 0 3m m 3 m 3 4 m 1 m 4 m4 m 2m 900 lux 900 lux 3m 900 lux 4m 600 600 600 8080 200 200 4040 80 200 900 lux 40 300 lux 300 lux 300 lux 80 200 600 40 220 6060 100 220 3030 60 30 100 220 300 lux 100 220 60 100 30 60 60 3030 30 10 10 10 30 3060 30 120 luxlux 120 30 60 30 10 120 lux

K801 K801 K801 K801

Single SingleLight Light Single Light Single Light

1.0 mm 1.0 m 1.0 1.0 m 2.0 mm 2.0 m 2.0 2.0 m 3.03.0 mm 3.0 m 3.0 m

120 lux

1.0 m

1.0 m 900 luxlux 900 1.0 m 900 lux 900 luxlux 900 1.0 m 220 220 900 lux 900 lux 100 1002.02.0 300 luxlux mm 300 220100 900 lux 220 300 luxlux 220 300 300 lux 2.0 m 220 220100 220 220 300 lux 100 300 lux 2.0 m 100 220 220 300 lux 100220

100

K802 K802 K802 K802

3.03.0 mm 3.0 m 3.0 m

Double DoubleLight Light Double Light Double Light

300 lux @2.0 300 lux @2.0 300 lux @2.0 300 lux @2.0 220 lux @2.0 220 lux @2.0 220 lux @2.0 220 lux @2.0 100 lux @2.0 100 lux @2.0 100 lux @2.0 100 lux @2.0 6060 lux @2.0 lux @2.0 60 lux @2.0 60 lux @2.0 3030 lux @2.0 lux @2.0 30 lux @2.0 30 lux @2.0

Custom Shelters

Landmarkâ&#x20AC;&#x2122;s comprehensive range of park shelters offers many standard designs, sizes and options that make it easy to refer to when planning for any community environment. Where a difficult landscape or environment dictates, or when your project demands a signature look we will work with you to design, engineer and manufacture a custom solution for your specific needs. With over 26 years of experience and an extensive range of standard shelter designs to start from we can effortlessly craft a custom design to suit site-specific or individual requirements. We draft, engineer, manufacture and install designs created by architects, landscape architects, engineers and anyone who wants a completely unique outcome. All custom shelters are drafted and engineered to wind design pressure, region, terrain, shielding and topography classifications. They meet or exceed the National Construction Code (NCC) and relevant Australian Standards including AS 1170 Structural Design Actions, AS 1720 Timber Structures and AS 4100 Steel Structures along with many other relevant codes and compliances. We will also apply, where possible, the Crime Prevention Through Environmental Design (CPTED) principles and use our proprietary anti-vandal bolts to further add value for our customers. Material selection can vary as new trends and improved materials enter the market. We are happy to incorporate your preferred choices and share our experience of what has worked well in the past, but the final choice is always yours. We collaborate with and listen to our customers, so you get the very best results. We are proud to be associated with outstanding design and architecture, which we believe play a very important part in all our communities.

Custom Shelters

Park Shelters 1.0 © Landmark Products 2015

Our shelters will have you covered in no time.

WITH OFFICES ACROSS AUSTRALIA AND NEW ZEALAND WE’VE GOT YOU COVERED

brisbane

perth adelaide

sydney

auckland

melbourne

Web landmarkpro.com.au Email sales@landmarkpro.com.au Call 1300 768 230

Restrooms

Australiaâ&#x20AC;&#x2122;s most comprehensive range of on-slab, raised and anti-vandal public restrooms.

Crime prevention through environmental design.

Info

Landmark’s range of restrooms are available in many formats, including raised or on-slab, standard, ambulant and accessible

Restrooms

cubicle layouts. They can be constructed with a variation of materials and have a great range of facade designs to choose from. We can modify any of the standard designs to create individuality or even custom design to suit site-specific applications to provide the optimum solution.

Where possible, we also use our proprietary stainless steel anti-vandal

Restrooms come in different formats. The most basic are female,

fastenings in locations that are susceptible to tampering, as they not

male or unisex with options for standard, ambulant and accessible

only deter vandals but also have been found to actually reduce theft

designs. We designate our cubicle configurations by using the

and destruction of the restrooms we supply.

number of cubicles followed by letters.

We have local staff in offices throughout Australia and New Zealand

CUBICLE CONFIGURATIONS

who understand that each restroom has different requirements

C = standard or ambulant cubicle

intended use. Ensuring a successful outcome for the community is an

(male, female or unisex - same foot print but different fit-out)

important step in each project and is of paramount importance to us.

D = accessible cubicle (unisex - larger foot print to meet code compliance) Examples using numbers and letters: • 2D has 2 accessible cubicles • 1C has 1 standard or ambulant cubicle

depending on location, community values, heritage, terrain and

All Landmark restrooms are prefabricated, supplied in flat pack kit form (Mettros™ supplied fully-constructed) with instructions and engineering certificates to show that they meet all building codes and Australian Standard requirements.

• 1D2C has 1 accessible cubicle with

2 standard / ambulant cubicles (nominate)

• 2D2C has 2 accessible cubicles with

2 standard / ambulant cubicles (nominate)

All standard restrooms have been designed, drafted and engineered to a minimum wind classification of N3 (W41). They meet or exceed the requirements of the National Construction Code (NCC) and use relevant Australian Standards, such as AS 1170 Structural Design Actions, AS 1720 Timber Structures, AS 4100 Steel Structures and AS 1428.1 Design for Access and Mobility, along with many other

YOU CAN TRUST A LANDMARK PRODUCT LANDMARK IS ISO 9001 CERTIFIED This international accreditation assures the highest quality standard of manufacture which ensures every Landmark product is consistently of the highest quality.

LANDMARK IS BS OHSAS 18001:2007 CERTIFIED This international Occupational Health and Safety Management certification is proof of our commitment to best practice.

relevant codes and compliances depending on the format and

SOLUTIONS FOR YOUR ENVIRONMENT

configuration. Our in-house design and engineering teams have

We design, engineer and manufacture to suit individual site specifications. We work with you to select the most appropriate materials for the application, location, environment and budget for the best possible outcomes.

many years of experience, which you can draw upon to ensure you get the desired result. Restrooms provide concealed private spaces and can attract undesired activities - to eliminate undesirable factors Landmark applies Crime Prevention Through Environmental Design (CPTED) principles to the design of our restrooms. These principles have been developed to maximise public safety and confidence. Working with councils across Australia we have developed a low maintenance, anti-vandal restroom - the Mettros™- making a substantial difference to the community in terms of the product lifecycle and maintenance costs. We source our materials from quality suppliers who apply the highest level of attention to detail, repeatability and scrutinisation to their products. We then manufacture according to our ISO 9001

LESS ON SITE DISTURBANCE Our restrooms are prefabricated and supplied in kit form guaranteeing less on-site disturbance, less noise and increased site safety.

STAINLESS STEEL ANTI-VANDAL FASTENING SYSTEM Our fastening system deters vandalism and can reduce the incidence of theft and destruction.

certification, which is the highest quality standard within the industry. To provide the utmost level of traceability, each and every restroom we supply carries a Landmark Traceability Plaque with a unique identification number. This allows our customers to trace and access product information easily should they ever need to maintain, upgrade

TRACEABILITY PLAQUE Every structure we supply carries an individual serial number to ensure all product specification history is easily available for any maintenance requirements.

or replicate an item. 1

Info

Restrooms Footings BOLT DOWN TO SLAB

STANDARD RESTROOM FOOTINGS

TIMBER POST FOOTING

Landmark has a huge range of standard pre-designed

STEEL POST FOOTING VERSIONS

restrooms. They are designed in flat pack kit form for reduced on-site disturbance and easy installation.

TIMBER POST LEAF

The footings standard to each series are listed under the STEEL SUPPORT

Standard Features column on each restroom series page. The diagrams (beside and below) illustrate the standard

GROUND IN LEVEL

timber and steel footings available across our extensive range of standard restrooms.

CONCRETE FOOTING

STEEL POST FOOTING VERSIONS

Should your project require it we can also provide you with a custom solution. Speak to your local Project Consultant

GROUND BOLT DOWN TO

CONCRETE SLAB

IN-GROUND

about your individual needs.

BOLT BELOW S

STEEL POST FOOTINGS

BOLT DOWN TO SLAB

STEEL POST FOOTING VERSIONS

STEEL POST

STEEL POST GROUND LEVEL

BOLT DOWN TO SLAB

CONCRETE SLAB SLAB THICKENING

BOLT-DOWN TO SLAB K9700 PARKLAND ONLY

STEEL POST

GROUND BOLT LEVEL

BELOW SLAB

CONCRETE SLAB CONCRETE FOOTING

BOLT-BELOW SLAB

CONCRETE FOOTING

IN-GROUND

BOLT BELOW SLAB IN GROUND

IN GROUND

STEEL BOLT-BELOW SLAB FOOTING

STEEL FRAMEWORK WITH FOOTINGS

STEEL FRAMEWORK AND WALLS ON-SLAB

IN GROU

Info

CPTED Principles

Purpose Recognition

CPTED - CRIME PREVENTION THROUGH ENVIRONMENTAL DESIGN WHAT ARE THE CPTED PRINCIPLES? NATURAL SURVEILLANCE

Natural Internal Lighting

• Natural Internal Lighting • Surrounding External Lighting • Visibility • Proximity to Other Facilities • Landscaping to Maintain Visibility

NATURAL ACCESS CONTROL • •

Surrounding External Lighting

Location and Directions Entry and Access Points

TERRITORIAL REINFORCEMENT • •

Purpose Recognition Purpose Identification Signage Landscaping to Maintain Visibility

MAINTENANCE • • • • • • • • • • •

Anti Vandal Materials Anti Vandal Fastening System Corrugated Iron - Hard “Canvas” to Graffiti Sinks with Shrouds Pans - Stainless Steel with no lids Mirror - Polished Stainless Steel Concrete Slab - No breakages of tiles etc. Hidden Services Local Components Cleaning Convenience Water Run Off and Ventilation

Entry and Access Points

Low Maintenance

Contents

RESTROOM INFORMATION Information

| Restrooms

Information

| Restroom Footings

Information

| CPTED Principles

STANDARD RESTROOM DESIGNS Raised Steel

| K9100 Carnarvon

Raised Timber

| K9200 Beechworth

On-Slab Traditional

| K9300 Heritage

On-Slab Timber

| K9400 Coastal

On-Slab Steel

| K9500 Caretaker

On-Slab Compact

| K9700 Parkland

On-Slab Anti Vandal | K9900 Mettrosâ&#x201E;˘

RESTROOM ELEMENTS

Materials and Finishes

Custom Designs

Raised

Steel Restrooms

Ideal for waste treatment systems.

K9100 Series - Carnarvon Raised steel restrooms provide the ideal solution for a robust restroom that requires a waste treatment system. The Carnarvon K9100 Series are well-matched for sloping and rugged sites.

STANDARD INCLUSIONS

Raised

Gable, skillion or curved roof Hot dip galvanised steel posts with steel roof frame

Steel Restrooms

Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Polycarbonate roof sheeting skylights Compressed Fibre Cement (CFC) cubicle flooring with non-slip paint provided Hardwood decking for outer floors and ramps

STANDARD RAISED STEEL RESTROOMS

Steel clad doors with fittings, closer and indicator bolts

The raised restroom range allows the use of alternate and stand-alone waste treatment systems. You can choose from options including drycomposting, on-site treatment, septic pump out or sewer. These designs are often used on sloped sites, leaving even ground that is best utilised for other purposes. The all-steel construction provides flexible design with the added benefit of being vandal resistant. Available in standard layouts with multiple options to cover a wide range of applications, they can also be modified for further enhancements. Landmark can custom engineer, manufacture and install to suit your site-specific solution, providing the optimum solution.

Stainless steel grab rails where appropriate

All Landmark restrooms are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to show that they meet relevant building codes and Australian Standard requirements.

A variety of tap options

Stainless steel push pull plates and toilet roll holders Access signage 4.5m disabled access ramp

STANDARD OPTIONS Treated plywood internal wall sheeting Colorbond ® Ultra Grade steel internal and external wall sheeting and roofing Powder coating for steel posts and roof frame Galvanised or stainless steel brackets and fixings Stainless steel fixtures - pans and basins Baby change facilities Stainless steel mirror, coat hooks and sharps disposal Hand towel and liquid soap dispensers

STANDARD FEATURES

MODIFICATIONS

•

Kit form walls, framework and roofing

•

Professional building application drawings

•

Stainless steel anti-vandal fastening system where applicable

•

N3 (W41) Structural Rating

•

Galvanised steel as per AS/NZS 4680:2006

•

AS1428.1 Mobility and Access compliant

•

CPTED principles applied design

•

In-ground posts

Baluster, screening and modesty panels

Waste treatment systems and water tanks 4865

Urinals, shower and change room facilities Standard size variations

3070

3070 3070

3500

4865

Structural rating upgrades beyond N3 (W41)

3500

3500 3500

4865

Two-pack epoxy paint or thermoplastic coatings for steel

4865 48654865

4865

4865 4865

Stairs and access ramp modules

CUSTOM SOLUTIONS 3070

3500

4485

3500

4485

5495

4865

2D2C

4865

99159915

9915

8350 7895

7895

4865

4865 4865

7895

5495

ROOF OPTIONS

4865

48654865

1C1D

4865

2C1D

5925

4865 5495

7895

5495

4485

8350 8350 7895

4865 4865 4865

5925

4865

7895 7895

5495

5925

4485

3070

4865

5495 5495

5925

3070

4865

4485

2D4C

8350

* These plans are indicative only for comprehensive information speak to your local Project Consultant about your restroom requirements.

9915

8350

4865

3070

4865

5925 5925

4485 4485

3500

4865

4865 4865

K9100 SERIES - CARNARVON - RAISED STEEL RESTROOMS

Raised

Timber Restrooms

Perfect for coastal conditions.

K9200 Series - Beechworth The raised timber design provides the ideal solution for harsh coastal environment restrooms requiring alternate waste treatment systems. The Beechworth K9200 Series are well-matched for sloping and rugged sites.

STANDARD INCLUSIONS

Raised

Gable or skillion roof Pine posts with pine roof frame

Timber Restrooms

Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Stain colour for pine posts and roof frame Polycarbonate roof sheeting skylights Compressed Fibre Cement (CFC) cubicle flooring with non-slip paint provided Hardwood decking for outer floors and ramps

STANDARD RAISED TIMBER RESTROOMS

Steel clad doors with fittings, closer and indicator bolts Stainless steel push pull plates and toilet roll holders

The raised restroom range allows the use of alternate and stand-alone waste treatment systems. You can choose from options including drycomposting, on-site treatment, septic pump out or sewer. These designs are often used on sloped sites, leaving even ground that is best utilised for other purposes. Available in standard layouts with multiple options to cover a wide range of applications, they can also be modified for further enhancements. Landmark can custom engineer, manufacture and install to suit your site-specific solution, providing the optimum solution.

Stainless steel grab rails where appropriate Access signage 4.5m disabled access ramp

STANDARD OPTIONS Hardwood posts with pine roof Stain colour for hardwood posts and roof frame Paint colour for pine posts and roof frame Treated plywood or Colorbond ® Ultra Grade steel internal and external wall sheeting

All Landmark restrooms are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to show that they meet

Colorbond ® Ultra Grade steel roofing

relevant building codes and Australian Standard requirements.

Galvanised or stainless steel brackets and fixings Stainless steel fixtures - pans and basins

STANDARD FEATURES

A variety of tap options Baby change facilities

•

Professional building application drawings

Stainless steel mirror, coat hooks and sharps disposal

•

Quality plantation and LOSP-treated pine

Hand towel and liquid soap dispensers

•

Select grade and ACQ-treated hardwood

MODIFICATIONS

•

Stainless steel anti-vandal fastening system where applicable

Baluster, screening and modesty panels

•

N3 (W41) Structural Rating

Stairs and access ramp modules

•

AS1428.1 Mobility and Access compliant

Urinals, shower and change room facilities

•

CPTED principles applied design

•

In-ground posts

4865

Structural rating upgrades beyond N3 (W41) 4865

4865 4865

4865

Kit form walls, framework and roofing

4865

•

4865

Standard size variations

CUSTOM SOLUTIONS

3070 3070

3500

3070

3500

K9200 SERIES - BEECHWORTH - RAISED TIMBER RESTROOMS 3500

4865

5925 4485

3070

4865

1C1D

7895

7895 7895

5925

5495 5495

4485

4865

4865 48654865

7895

5495

4485

5925

5495

2C1D

5925

ROOF OPTIONS 4865

4865

4865 4865 4865 4865

4865

4865 4865 4865

9915 8350 9915 7895

8350 8350 7895

9915

8350

9915

2D2C

5495

4865

4485

5495

4865

3500

5925 5925

4865 4865

3500

4485 3070

4865

5925

4485 4485

4865

3070

4865 4865

4865

4865 4865

4865

3070

2D4C 7895

5495for comprehensive information speak to your local Project Consultant about your restroom requirements. * These plans are indicative only

8350

On-Slab

Traditional Restrooms

Classic focus.

K9300 Series - Heritage A traditional restroom design aesthetic for projects that require a true heritage focus. The Heritage K9300 Series uses a modern blend of materials to ensure durability and a low maintenance outcome.

On-Slab

STANDARD INCLUSIONS Gable roof

Traditional Restrooms

Steel posts with pine roof frame Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Pine external decorative feature Stain for pine external wall frame and roof frame

STANDARD ON-SLAB TRADITIONAL RESTROOMS

Polycarbonate roof sheeting skylights

The traditional exterior facade, common to the K9300 Heritage Series, is well-suited to heritage surroundings and has a modern durable finish for low maintenance. The concrete slab foundation provides a simple, cost effective and durable platform to connect to sewer mains or alternative waste treatment systems. All restrooms are designed with a service duct for easy maintenance and storage of items. Available in standard layouts with multiple options to cover a wide range of applications, they can be modified for further enhancements. Landmark can custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution.

Stainless steel push pull plates and toilet roll holders

All Landmark restrooms are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to show that they meet

Stainless steel fixtures - pans and basins

relevant building codes and Australian Standard requirements.

A variety of tap options

Steel clad doors with fittings, closer and indicator bolts Stainless steel grab rails where appropriate Access signage

STANDARD OPTIONS Paint colour for pine external wall frame and roof frame Treated plywood internal wall sheeting Colorbond ® Ultra Grade steel internal wall sheeting and roofing Powder coating for steel posts Galvanised or stainless steel brackets and fixings Hidden dual flush plastic cistern Baby change facilities

STANDARD FEATURES

Stainless steel mirror, coat hook and sharps disposal Hand towel and liquid soap dispensers

Kit form walls, framework and roofing Professional building application drawings Quality plantation and LOSP-treated pine Select grade and ACQ-treated hardwood Stainless steel anti-vandal fastening system where applicable N3 (W41) Structural Rating Galvanised steel as per AS/NZS 4680:2006 AS1428.1 Mobility and Access compliant 3300 CPTED principles applied design Bolt-below slab posts 3300

MODIFICATIONS

3300

Urinals, shower and change room facilities

5960 5960 5960

Standard size variations

5960

CUSTOM SOLUTIONS

2885

5960

Structural rating upgrades beyond N3 (W41) 5960

5960

Baluster, screening and modesty panels

5960

• • • • • • • • • •

2885

2885 3300

2885

5960 5960

5960

5960 5960

5960

5960 5960

5960

3300 K9300 SERIES - HERITAGE - ON-SLAB TRADITIONAL RESTROOMS

5725

4305 5725

4305

5725 5725

4305

5310

7725

5310

5960

7725

1D2C

5725

5310 5725

1D1C

4305

5960

5310 5725 4305 4305

5960

2885

59605960 5960 5960

5960 5960

3300

5960

2885 3300

5960

4305

7725

2D2C

5310

9460

8150

7725 5310

3D 5310

9460

5960 5960

5960

5960 5960

5960

2D4C

81508150

7725

5960

ROOF OPTIONS

7725

* These plans are indicative only for comprehensive information speak to your local Project Consultant about your restroom requirements.

9460 9460 8150

On-Slab

Timber Restrooms

Modern timber for harsh environments.

K9400 Series - Coastal The natural beauty of timber coupled with contemporary design provides a modern feel that complements any park or urban space while delivering the ideal solution for harsh coastal or corrosive environments.

On-Slab

STANDARD INCLUSIONS

Timber Restrooms

Gable or skillion roof Pine posts with pine roof Stain colour for pine posts and roof frame Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Polycarbonate roof sheeting skylights

STANDARD ON-SLAB TIMBER RESTROOMS

Steel clad doors with fittings, closer and indicator bolts Stainless steel push pull plates and toilet roll holders

The modern aesthetic facade with timber framing of the K9400 Coastal

Stainless steel grab rails where appropriate

Series is well-suited to coastal or corrosive environments. The concrete slab foundation provides a simple, cost effective and durable platform

Access signage

to connect to sewer mains or alternative waste treatment systems. All

STANDARD OPTIONS

restrooms are designed with a service duct for easy maintenance and

Hardwood posts with pine roof

storage of items. Available in standard layouts with multiple options to

Stain colour for hardwood posts and roof frame

cover a wide range of applications, or they can be modified for further

Paint colour for pine posts and roof frame

enhancements. Landmark can also custom engineer, manufacture and

Treated plywood or Colorbond ® Ultra Grade steel internal and external wall sheeting

install to suit your site-specific application, providing the optimum solution.

Colorbond ® Ultra Grade steel roofing

All Landmark restrooms are prefabricated, supplied in flat pack

Galvanised or stainless steel brackets and fixings

kit form with instructions and engineering certificates to show that they

Stainless steel fixtures - pans and basins Hidden dual flush plastic cistern

meet relevant building codes and Australian Standard requirements.

A variety of tap options

STANDARD FEATURES

Baby change facilities Stainless steel mirror, coat hook and sharps disposal

•

Kit form walls, framework and roofing

•

Professional building application drawings

•

Quality plantation and LOSP-treated pine

•

Select grade and ACQ-treated hardwood

•

Stainless steel anti-vandal fastening system where applicable

•

N3 (W41) Structural Rating

•

AS1428.1 Mobility and Access compliant

•

CPTED principles 3420applied design

•

In-ground posts

Hand towel and liquid soap dispensers

Standard size variations

3000 CUSTOM SOLUTIONS

3000 3000

4420

54205420

5860

5430

5860

5430 5860

8300 9690

8300

2D4C

5420

9690

8300

7865

5860

ROOF OPTIONS

5860 5860 5860

5860

9690

2D2C

5420

7865

5420

7865 7865

1D2C

5845

5860 7865

5860

78657865

5845

8300

1D1C

4420

5860

5420 5420

5845 4420

5860 5860 5845

3000

5860

3000

5860

3420

5430

3000

5845

5860

4420

8300

5860

5845

4420 3420

5860

4420

3420

5860

5860 5860

5860

K9400 SERIES - COASTAL - ON-SLAB TIMBER RESTROOMS

* These plans are indicative only for comprehensive information speak to your local Project Consultant about your restroom requirements.

5430

3420

5860

Structural rating upgrades beyond N3 (W41)

3000

3420

5860

Urinals, shower and change room facilities

5860

3420

Baluster, screening and modesty panels

5860

MODIFICATIONS

On-Slab

Steel Restrooms

Durability and style.

K9500 Series - Caretaker A robust all-steel structure with a modern design aesthetic, on-slab steel restrooms complement any park or urban space while delivering the ideal solution for low maintenance and vandalism minimisation.

On-Slab

STANDARD INCLUSIONS

Steel Restrooms

Gable, skillion or curved roof Hot dip galvanised steel posts with steel roof frame Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Polycarbonate roof sheeting skylights Steel clad doors with fittings, closer and indicator bolts

STANDARD ON-SLAB STEEL RESTROOMS

Stainless steel push pull plates and toilet roll holders

The 9500 Caretaker Series has a selection of possible facades suitable for all aesthetic applications, with an all-steel durable design for strong sustained performance. The concrete slab foundation provides a simple, cost effective and durable platform to connect to sewer mains or alternative waste treatment systems. All restrooms are designed with a service duct for easy maintenance and storage of items. The strong steel construction provides flexibility in design and layout with the added benefit of being highly resistant to vandalism. Available in standard layouts with multiple options to cover a wide range of applications, they can be modified for further enhancements. Landmark can custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution.

Stainless steel grab rails where appropriate Access signage

STANDARD OPTIONS Treated plywood internal wall sheeting Colorbond ® Ultra Grade steel internal and external wall sheeting and roofing Powder coating for steel posts and roof frame Galvanised or stainless steel brackets and fixings Stainless steel fixtures - pans and basins Hidden dual flush plastic cistern A variety of tap options

All Landmark restrooms are prefabricated, supplied in flat pack kit form

Baby change facilities

with instructions and engineering certificates to show that they meet relevant building codes and Australian Standard requirements.

Stainless steel mirror, coat hook and sharps disposal Hand towel and liquid soap dispensers

STANDARD FEATURES

MODIFICATIONS

•

Kit form walls, framework and roofing

•

Professional building application drawings

•

Stainless steel anti-vandal fastening system where applicable

•

N3 (W41) Structural Rating

•

Galvanised steel as per AS/NZS 4680:2006

•

AS1428.1 Mobility and Access compliant

•

CPTED principles applied design

•

Baluster, screening and modesty panels Two-pack epoxy paint or thermoplastic coatings for steel

3300

5960

Standard size variations

5960

Structural rating upgrades beyond N3 (W41)

CUSTOM SOLUTIONS

5960

5960 5960

5960

Urinals, shower and change room facilities

2885

Bolt-below slab 3300 posts

2885 33003300

2885 2885

59605960

5960

53105725 5310

5960

5960 5960

5960

7725

5725

4305 5725

1D1C

5960 5960

5960

7725

5310

5725 5725 4305

2885

5960

5725

43054305

2885

5960

5310

5960

5960 5725

3300 2885 3300

4305

5960 5960

5960

4305

5960

4305

5960

K9500 SERIES - CARETAKER - ON-SLAB STEEL RESTROOMS 3300

7725

1D2C

2D2C

7725 5310

5310 8150

7725 5310

8150

9460

2D4C

7725 8150

* These plans are indicative only for comprehensive information speak to your local Project Consultant about your restroom requirements.

9460

9460 8150

5960

5960 5960 5960

5960

9460 7725

8150

59605960

5960

ROOF OPTIONS

On-Slab

Compact Restrooms

Universal designs.

K9700 Series - Parkland Universal designs that are well-equipped for smaller space requirements with a robust all-steel structure suitable for any park or urban space.

On-Slab

Compact Restrooms STANDARD INCLUSIONS Roof designs as standard layouts Hot dip galvanised steel posts Colorbond ® XRW Grade steel internal and external wall sheeting and roofing Polycarbonate roof sheeting skylights (K9703) Steel clad doors with fittings, closer and indicator bolts Stainless steel push pull plates and toilet roll holders Stainless steel grab rails where appropriate

STANDARD ON-SLAB RESTROOMS

Access signage

These universal, durable designs are well-suited to vandal prone areas and are low maintenance. These compact designs accommodate low usage and limited space requirements. The concrete slab foundation provides a simple, cost effective and durable platform to connect to sewer mains or alternative waste treatment systems. The K9704 is designed with a service duct for easy maintenance and storage of items. Available in standard layouts with a variety of options to cover a wide range of applications, they can also be modified for further enhancements. Landmark can custom engineer, manufacture and install to suit your site-specific application, providing the optimum solution.

STANDARD OPTIONS Treated plywood internal wall sheeting Colorbond ® Ultra Grade steel internal and external wall sheeting and roofing Powder coating for steel posts Galvanised or stainless steel brackets and fixings Dual flush plastic cistern A variety of tap options Baby change facilities

All Landmark restrooms are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to show that they meet

Stainless steel mirror, coat hook and sharps disposal Hand towel and liquid soap dispensers

relevant building codes and Australian Standard requirements.

MODIFICATIONS

STANDARD FEATURES

Baluster, screening and modesty panels

•

Kit form walls, framework and roofing

Two-pack epoxy paint or thermoplastic coatings for steel

•

Professional building application drawings

Urinals, shower and change room facilities

•

Stainless steel anti-vandal fastening system where applicable

Structural rating upgrades beyond N3 (W41)

•

N3 (W41) Structural Rating

Standard size variations

•

Galvanised steel as per AS/NZS 4680:2006

•

AS1428.1 Mobility and Access compliant

•

CPTED principles applied design

•

Bolt-below slab or bolt-down posts

CUSTOM SOLUTIONS

K9700 SERIES - PARKLAND - ON-SLAB COMPACT RESTROOMS

4420 4420

PYRAMID ROOF / STEEL POSTS 1D / PINE ROOF FRAME

3870 3870

3650 3650

PYRAMID

3870 3870

CURVED ROOF / ALL-STEEL

3500 3500

3850 3850

3870 3870

3850 3850

3870 3870

CURVED ROOF / ALL-STEEL

4420 4420

3650 3650

ROOF OPTIONS

3500 3500

CURVED ROOF / ALL-STEEL

* These plans are indicative only for comprehensive information speak to your local Project Consultant about your restroom requirements.

On-Slab

Anti-Vandal Restrooms

Accessibility with strength.

K9900 Series - Mettrosâ&#x201E;˘ Well-suited for modern day use with a multitude of features the Mettrosâ&#x201E;˘ range has been specifically developed to combat vandalism. It offers access for mobility impairments and has very low maintenance requirements.

STANDARD EXTERIOR INCLUSIONS

On-Slab

Anti-Vandal Restrooms

Skillion 100mm insulated roof High-strength polycarbonate skylight to each cubicle Smooth Colorbond® bonded 80mm insulated walls N3 (W41) stainless steel structural posts 316 stainless steel bonded door

STANDARD ON-SLAB ANTI-VANDAL RESTROOMS

with minimum 850mm of clear access

Mettros™ restrooms have been designed for today’s public toilet

Anti-vandal access signage

requirements. They are anti-vandal, high-volume, low maintenance and

Cast in slab crane hooks for easy site installation

relocatable while complying with mobility and accessibility requirements.

and relocation

40 Mpa precast, polished and coated non-slip tested concrete floor, built-in plumbing and rear drain

They meet and exceed national codes and Australian Standards and management systems. The range provides asset owners low-cost

STANDARD INTERIOR INCLUSIONS

ownership for the life of the facility while providing the community with

316 stainless steel walls

safe, hygienic restrooms that stay in continued use.

Anti-vandal stainless steel toilet with remote flushing

are manufactured according to internationally-recognised ISO quality

(WELS 3L half and 4.5L full flush) Disable compliant and anti-vandal stainless steel pan with integrated seat (1D unit only) Ambulant compliant and anti-vandal stainless steel pan with integrated seat (1C unit only) Access compliant grab rails in high-visibility yellow Locking anti-vandal hidden service duct Stainless steel polished anti-vandal mirror Anti-vandal signage Anti-vandal push tap (WELS 6 star water rating)

K9900 SERIES - METTROS™ANTI-VANDAL RESTROOM

Anti-vandal concealed sensor lighting Jumbo stainless steel toilet roll holder Stainless steel coat hook

STANDARD OPTIONS Colour combinations (external wall cladding) Graphics and logo incorporated in the celestory panels Extended eves and/or screens (1D option only) LED flush anti vandal eve light when extended eves are fitted

K9901

N5/C3 (W60) steel structural posts 1D

Automated curfew locking with programmable time adjustment Automated anti vandal 3-in-1 hand cleaning station (stainless steel, sensor-operated soap dispenser, water and electric hand drier) Proprietary baby change table (stainless steel with solid surface, 1D option only) Stainless steel wall mounted sharps container

K9902

1D1C

* These plans are indicative only for a comprehensive guide speak to your local Project Consultant about your restroom requirements.

Materials & Finishes We source our materials from quality suppliers who provide

We use many other materials such as composites, plastics,

attention to detail, repeatability and high scrutinisation of

glass, stainless steel, concrete and other timber species

their products. We then manufacture accordingly to achieve

for varying applications. With restrooms we can use a range

the industry’s highest quality time after time as ensured by

of structural materials, cladding, roofing, internal linings

our ISO 9001 certification.

and fit-out options to cover a wide range of solutions for

Our pine is environmentally-friendly plantation sourced and is

individual requirements.

stabilised and treated with Light Organic Solvent Preservatives (LOSP) to provide protection from insects and decay. It can be stained or painted to further enhance it’s life, durability and appeal.

We choose to give the highest level of attention to our fittings and provide a choice of galvanised or stainless steel depending on the application. We use, where possible, our proprietary stainless steel anti-vandal fastening system in locations that are

Our hardwood is select-grade and sustainably-harvested

susceptible to tampering as they not only deter vandals but have

western Queensland hardwood or similar stress grade F17 or

been found to reduce the theft and destruction of the restrooms

better. It is treated with Ammoniacal Copper Quaternary (ACQ)

we supply.

for protection from insects and decay, which can be stained. We don’t recommend painting on hardwood because it releases natural tannins from the timber and diminishes the look of the finished paintwork. We can also use other types of timber species and finishes according to your requirements. Our steel is structural-grade and hot-dip galvanised as per AS/NZ 4680 for superior performance. It can then be powder coated to provide a hardwearing protective coating,

TIMBER PAINT COLOURS

PINE STAINS

which is attractive and comes in many colour options. For a higher level of corrosive protection from the elements, we recommend using two-pack epoxy paint or thermoplastic coatings over galvanised steel structures. Aluminium is also a structural grade and usually chosen for its excellent anti-corrosive properties for those locations that are harshly affected by the environment, but due to the relatively

EPOXY / TWO PACK COLOURS HARDWOOD STAIN

limited strength (approximately 30% that of steel) there are some design issues that limit its use. Aluminium can be powder coated or anodised providing an attractive finish that comes in many colours, both two-pack paint and thermoplastic coatings can also be used to further enhance its natural anti-corrosive abilities.

POWDER COAT OPTIONS

WPC COLOUR SELECTION

Custom Restrooms

Where a landscape or environment dictates an individual solution or where a project requires additional features such as showers, urinals, change rooms, sports or storage facilities, we can work with you to develop a custom design that meets your needs. Our huge range of standard restrooms can be the inspiration for any custom solution. We also draft, engineer, manufacture and install designs completed by architects, landscape architects, engineers and other professionals looking for unique facilities. All custom restrooms are designed, drafted and engineered complete to a minimum wind classification of N3 (W41) or specifically to your local design pressure. They meet or exceed the National Construction Code (NCC) and use relevant Australian Standards such as AS 1170 Structural Design Actions, AS 1720 Timber Structures, AS 4100 Steel

Circulation space inside cubicles, on decking areas and access ramps

Structures and AS 1428.1 Design for Access and Mobility, along with

for people in wheel chairs and those with impairments is also an

many other relevant codes and compliances depending on the format

important factor. The location of fit-out items such as grab rails, toilet

and configuration.

roll holders and basins can vary based on the cubicle types

Landmark applies Crime Prevention Through Environmental Design (CPTED) principles. CPTED Principles have been developed to

and understanding the National Construction Code and Australian Standard requirements.

ensure public safety which is of paramount importance. Through our

New trends influence material selections and over the years at

collaboration with councils across Australia we have found that, in

Landmark we have seen many trends in the market. We have years

addition to ensuring the public’s safety, a focus on anti-vandal and low

of experience and are happy to collaborate with you and share which

maintenance restrooms makes a substantial difference to the product

materials we have seen deliver great aesthetic outcomes that perform.

lifecycle, maintenance costs and ultimately the community.

RESTROOMS DESIGN CONSIDERATIONS

Landmark are proud to be associated with great design and

•

Size / foot print / maximum allocated area

architecture, which we believe plays a very important part in all

•

Waste treatment system / location to sewers

our communities.

•

Number of cubicles / daily use requirements

Understanding these important design considerations we can then decide which restroom style is best suited to your project. This is determined by considering the landscape and topography of the project site - urban, regional or even remote environments and the available services in the area will effect the size of the restroom and which waste treatment system is most suitable. Demand generated by public traffic will influence the number of cubicles required for a project. Local government requirements and surrounding local facilities will generally determine the appropriate restroom solution. Restrooms come in different formats. The most basic are female, male or unisex with options for standard, ambulant and accessible cubicles. Which configuration of these formats to use is an important consideration for any restroom design, layout and fit-out. Unisex cubicles can reduce the total number of cubicles required.

We listen to and work with our customers for the very best solutions.

For more detailed information about custom designs please contact your local Project Consultant.

Custom Restrooms

Restrooms 1.0 © Landmark Products 2015

Creating social accessibility.

WITH OFFICES ACROSS AUSTRALIA AND NEW ZEALAND WE’VE GOT YOU COVERED

brisbane

perth adelaide

sydney

auckland

melbourne

Web landmarkpro.com.au Email sales@landmarkpro.com.au Call 1300 768 230

Pedestrian Bridges

With a great selection of designs and materials there are a multitude of ways to create safe accessibility for all the community.

YOU CAN TRUST A LANDMARK PRODUCT

LANDMARK IS ISO 9001 CERTIFIED This international accreditation assures the highest quality standard of manufacture which ensures every Landmark product is consistently of the highest quality.

LANDMARK IS BS OHSAS 18001:2007 CERTIFIED This international Occupational Health & Safety Management certification is proof of our commitment to best practice.

LESS ON-SITE DISTURBANCE Our pedestrian bridges are prefabricated and supplied in kit form guaranteeing less on-site disturbance, less noise and increased site safety.

STAINLESS STEEL ANTI-VANDAL FASTENING SYSTEM Our fastening system deters vandalism and can reduce the incidence of theft and destruction.

CROSS FLOOD LOADING ENGINEERED

Connecting communities.

We engineer to on-site specific requirements for cross flood loading and debris contact within flood re occurrence intervals.

TRACEABILITY PLAQUE Every structure we supply carries an individual serial number to ensure all product specification history is easily available for any maintenance requirements.

Info

Pedestrian Bridges Landmark designs, constructs and installs pedestrian bridges to suit site-specific applications and environments. We have four main

STANDARD SINGLE SPAN LIMITS

bridge ranges that are based on the main materials and construction methods required for different applications. Our ranges include Timber Truss (Torrens), Steel I Beam (Condamine), Aluminium (PML) and Steel

STANDARD WIDTH (mm)

reinforced plastic (FRP) to give great flexibility when considering the

2000

10 12 14 16 18 20 22 24 26 28 30 32 34 40 60

K1104 SERIES PML K1105 SERIES MURRAY

All Landmark pedestrian bridges are designed, drafted and engineered

K1101 SERIES TORRENS

to meet or exceed the requirements of the National Construction 2500

Structural Design Actions, AS 1720 Timber Structures, AS 4100 Steel

K1103 SERIES CONDAMINE K1104 SERIES PML K1105 SERIES MURRAY

Structures, AS 5100 Bridge Design and AS 1428.1 Design for Access

K1101 SERIES TORRENS

and Mobility. We also understand, and apply if relevant, flood loading, pedestrian loading (3kPa to 5kPa) and vehicle loading requirements

K1103 SERIES CONDAMINE

structure type, application, location and environment.

Code (NCC) and use relevant Australian Standards, including AS 1170

K1101 SERIES TORRENS

Truss (Murray). We also use a variety of decking materials including steel, timber, aluminium, wood plastic composite (WPC) and fibre

CLEAR SPAN (m)

BRIDGE SERIES

3000

K1103 SERIES CONDAMINE

along with many other relevant compliances or requests. Our in-house

K1104 SERIES PML

design and engineering teams have many years of experience, which

K1105 SERIES MURRAY

you can draw upon to ensure you get the desired results you expect.

BRIDGE COMPARISON GUIDE

We source our materials from quality suppliers who provide attention to detail, repeatability and high scrutinisation of their products. We then manufacture according to our ISO 9001 certification, which

PEDESTRIAN BRIDGE SERIES

ensures the industryâ&#x20AC;&#x2122;s highest quality is achieved. To provide the

OPTIONS LOADINGS

utmost level of traceability, each and every pedestrian bridge we

Pedestrian or Cycleway

supply carries a Landmark plaque with a unique identification, offering

Light Vehicle (maintenance)

our customers valued information when upgrading, maintaining or ever

Custom Loads

replacing an individual item.

DECKING

products, right down to the fittings we use. We provide a choice

Timber Hardwood Decking

of galvanised or stainless steel depending on the application. We also use where possible our proprietary stainless steel anti-vandal fastening system in locations that are susceptible to tampering, as they not only deter vandals, but have also been found to actually

We have offices with local staff all over Australia and New Zealand who understand that each pedestrian bridge has different needs depending on location, community values, heritage, terrain and required use. It is an important step in achieving the best results for community outcomes, which is always paramount at Landmark.

certificates to meet all relevant building codes and Australian Standard requirements.

K1104 SERIES PML

K1105 SERIES MURRAY

Concrete: Insitu Pour or Precast Panels Fibre Reinforced Plastic (FRP) Grate Decking Wood Plastic Composite (WPC) Aluminium

reduce the theft and destruction of the products we supply.

in flat pack kit form with instructions and engineering

K1103 SERIES CONDAMINE

Flood Loads

We choose to give the highest level of concern to every part of our

All Landmark pedestrian bridges are prefabricated, supplied

K1101 SERIES TORRENS

Other: FC and Bitumen, Plywood SAFETY BARRIERS Chain Mesh: Galvanised and Plastic Coated Bicycle and Disabled Access Rails Light Barrier Panels Heavy Duty Barrier Panels Timber or Aluminium Baluster Panels CUSTOM SOLUTIONS Customisation according to the project and site

* Above information is a guide only for comprehensive loading information please contact your local Project Consultant.

Contents

PEDESTRIAN BRIDGE INFORMATION

STANDARD PEDESTRIAN BRIDGE DESIGNS Timber Truss | K1101 Series - Torrens

I Beam

| K1103 Series - Condamine

Aluminum

| K1104 PML

Steel Truss

| K1105 Murray

PEDESTRIAN BRIDGE ELEMENTS Diamond Piers Composite Materials Materials and Finishes

11 12 13

Timber Truss

Pedestrian Bridges

Effective shorter spans.

K1101 Series - Torrens Timber truss pedestrian bridges are a practical, safe and economical solution for short single spans or where multiple spans are an option.

Timber Truss

STANDARD FEATURES Precision manufactured components and hardware

Pedestrian Bridges

Preprocessed parts and sections Professional building application drawings Independent engineering certification Comprehensive installations instructions All pine is quality plantation and LOSP treated

STANDARD K1101 SERIES -TORRENS TIMBER TRUSS PEDESTRIAN BRIDGES

All hardwood is select grade, sustainably-harvested and ACQ treated Hot dipped galvanised steel to AS/NZS 4680:2006

Timber truss designed pedestrian bridges are perfect for short

Stainless steel anti-vandal fastening system (where applicable)

single spans in flat or cranked configuration and also for the longer requirements of multi spans. The natural beauty and resilience of timber

High grade penetrating timber treatment stain with colour tones

makes it the perfect choice to blend into any existing landscape. Each timber pedestrian bridge is designed and manufactured according to individual requirements covering standards, codes and compliances.

STANDARD OPTIONS

Engineering is vital when designing and manufacturing pedestrian

Pine structure with galvanised saddles

bridges, which is why we comply with the National Construction Code

A selection of hand rail, kick rail and barrier panels

and apply all necessary standards where applicable. We also consider

Bicycle and disabled access rails

pedestrian loading requirements. Our standard design of timber truss

Specialised piers for sensitive or remote sites

pedestrian bridges complies to a maximum 3kPa pedestrian loading. We

Decking options include: hardwood, wood plastic composite (WPC) decking, steel or fibre reinforced plastic (FRP) grate decking

can also manufacture using many different materials giving you unlimited design choices. All Landmark pedestrian bridges are prefabricated, supplied in flat pack

Galvanised or stainless steel fixings

kit form with instructions and engineering certificates, to meet all relevant

Upgrade to hardwood structure

building codes and Australian Standard requirements.

CUSTOM SOLUTIONS DESIGN OPTIONS SINGLE SPAN LIMITS STANDARD WIDTH (mm)

CLEAR SPAN (m) 4

1500 2000 2500 3000

RENDER

SECTIONAL VIEW

STANDARD WIDTH CLEARANCE

I Beam

Pedestrian Bridges

High cross flood loading.

K1103 Series - Condamine Steel I Beam pedestrian bridges are versatile with a short to medium single span range. They can be engineered and manufactured as per AS5100, vehicle or cross-flood loading, making them the ideal selection for many situations.

I Beam

STANDARD FEATURES Precision manufactured components and hardware

Pedestrian Bridges

STANDARD K1103 SERIES - CONDAMINE I BEAM PEDESTRIAN BRIDGES

All hardwood is select grade, sustainably-harvested and ACQ treated

I Beam pedestrian bridges are chosen for their versatility and load-

Hot dipped galvanised steel to AS/NZS 4680:2006

bearing capabilities. They have a useful single span length and can be

Stainless steel anti-vandal fastening system (where applicable)

designed as flat, multi span, cranked or curved. High load capabilities allow the I Beam to accommodate vehicular access and also to be

High grade penetrating timber treatment stain with colour tones

used for AS 5100 (5kPa requirements) if desired. They can also be engineered according to cross-flood loading requirements, making them the perfect choice for creeks and

STANDARD OPTIONS

floodway areas.

Steel I Beam, barrier panels and hand rails

Each I Beam pedestrian bridge is designed and manufactured to

A selection of hand rail, kick rail and barrier panels

individual requirements covering standards, codes and compliances.

Bicycle and disabled access rails

Engineering is vital when designing and manufacturing pedestrian

Specialised piers for sensitive or remote sites

bridges, which is why we comply with the National Construction Code flood, pedestrian and vehicular loading requirements. Our standard

Decking options include: hardwood, wood plastic composite (WPC) decking, steel or fibre reinforced plastic (FRP) grate decking

design of I Beam pedestrian bridges complies to a maximum 5kPa

Galvanised or stainless steel fixings

pedestrian loading. We can also manufacture using many different

AS 5100 compliance

and apply all necessary standards where applicable. We consider

materials, giving you unlimited design choices.

High cross flood loading

All Landmark pedestrian bridges are prefabricated, supplied in

Vehicle loading

flat pack kit form with instructions and engineering certificates to meet

CUSTOM SOLUTIONS

all relevant building codes and Australian Standard requirements.

DESIGN OPTIONS SINGLE SPAN LIMITS STANDARD WIDTH (mm)

CLEAR SPAN (m) 4

1500 2000 2500 3000

RENDER

SECTIONAL VIEW

STANDARD WIDTH CLEARANCE

Aluminium

Pedestrian Bridges

Modern low maintenance construction.

K1104 Series - PML Aluminium pedestrian bridges are chosen for their modern light-weight designs, corrosion resistance, low maintenance and minimal whole of life cost. They are well-suited for harsh, corrosive coastlines with an impressive ability to use single spans up to sixty metres.

Aluminium

STANDARD FEATURES Designed in Germany

Pedestrian Bridges

Precision manufactured components and hardware Manufactured and delivered in sections Professional building application drawings Independent engineering certification

STANDARD K1104 SERIES - PML ALUMINIUM PEDESTRIAN BRIDGES

Comprehensive installation instructions High-strength aluminium alloy

Aluminium pedestrian bridges are a modern alternative that have huge

STANDARD OPTIONS

benefits over traditionally used materials. Chosen for their minimal whole of life cost, low maintenance and high corrosion resistance. They are

Four different system options (see below)

also suited for sensitive or difficult to access sites, being lightweight and

Up to 5KN/m2 working loads

quick and easy to install.

A selection of decking types (see below)

PML is a world leading company in the design and construction of

Anodised or RAL powder coat colours

aluminium bridges, overpasses and observation towers. The material and design excellence of PML bridges make high-strength aluminium

Low-medium cross flood loading

pedestrian bridges possible.

A selection of hand barrier panels types (see below)

Each PML aluminium pedestrian bridge is designed and manufactured

AS 5100 compliance

according to individual requirements covering standards, codes and

CUSTOM SOLUTIONS

compliances. Engineering is vital when designing and manufacturing pedestrian bridges, which is why we comply with the National Construction Code and apply all necessary standards where applicable. We consider flood, pedestrian and vehicular loading requirements. All Landmark pedestrian bridges are prefabricated, supplied in kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

R SYSTEM

L SYSTEM STANDARD WIDTH CLEARANCE

STANDARD WIDTH CLEARANCE

SINGLE SPAN LIMITS STANDARD WIDTH (mm)

SYSTEM

CLEAR SPAN (m) 4

B SYSTEM

SL SYSTEM

10 12 14 16 18 20 22 24 26 28 30 32 34 40 50 55 60

STANDARD OPTIONS BY SYSTEM CATEGORY

R 1500

2000

Horses and Livestock

Flood Loads

Timber

Qualigrip Anti Slip System Recycled Plastic

PU Coating

SL R

Perforated Metal Sheet Stainless Steel Ropes

BARRIERS Vertical Aluminium Bars

Vertical Timber Bars

Meshed Metal Baffle

Fluted Aluminium Platforms

DECKING

3000

Light Vehicles

LOADINGS Tractors and Mowers

2500

OPTIONS Pedestrian or Cycle Ways

L SL

STANDARD WIDTH CLEARANCE

3500

4000

SYSTEMS R

Steel Truss

Pedestrian Bridges

Strong lengthy spans.

K1105 Series - Murray Steel truss pedestrian bridges are used for their economical long-spanning abilities and effective load-bearing capabilities.

Steel Truss

STANDARD FEATURES

Pedestrian Bridges

Precision manufactured components and hardware Preprocessed parts and sections Professional building application drawings Independent engineering certification Comprehensive installations instructions All pine is quality plantation and LOSP treated

STANDARD K1105 SERIES - MURRAY STEEL TRUSS PEDESTRIAN BRIDGES

All hardwood is select grade, sustainably-harvested and ACQ treated Hot dipped galvanised steel to AS/NZS 4680:2006

Steel truss pedestrian bridges are used for their economical long-

Stainless steel anti-vandal fastening system (where applicable)

spanning abilities and effective load-bearing capabilities. They have a lengthy single-span reach and can be designed as flat, multi-span,

High grade penetrating timber treatment stain with colour tones

cranked or curved. Each steel truss pedestrian bridge is designed and manufactured to individual requirements covering standards, codes and compliances.

STANDARD OPTIONS

Engineering is vital when designing and manufacturing pedestrian

A selection of hand rail, kick rail and barrier panels

bridges, which is why we comply with the National Construction Code

Bicycle and disabled access rails

and apply all necessary standards where applicable. We consider

Specialised piers for sensitive or remote sites

flood, pedestrian and vehicular loading requirements. While we have common requirements, we can also manufacture using many different

Decking options include: hardwood, wood plastic composite (WPC) decking, steel or fibre reinforced plastic (FRP) grate decking

materials, giving you unlimited design choices.

Galvanised or stainless steel fixings

a large selection of standard features and options to cover the most

AS 5100 compliance

All Landmark pedestrian bridges are prefabricated, supplied in flat pack kit form with instructions and engineering certificates to meet all

Low-medium cross flood loading

relevant building codes and Australian Standard requirements.

CUSTOM SOLUTIONS

DESIGN OPTIONS SINGLE SPAN LIMITS STANDARD WIDTH (mm)

CLEAR SPAN (m) 4

1500 2000 2500 3000

SECTIONAL VIEW

RENDER

STANDARD WIDTH CLEARANCE

M16

Diamond Piers

CONCRETE PIER HEAD ANCHOR BOLT

INSPECTION CAP

GROUND LEVEL

EXISTING SOIL

Construction without excavation is now easier with our Diamond

BEARING PIN

Pier foundations. Diamond Piers are commonly used on installations at sensitive, problematic or hard-to-reach sites. Diamond Piers can also be used for standard site installations to reduce noise (heavy machinery is not required) and they allow the structure above to be

INSPECTION PLUG

easily removed or relocated if required. These piers are also ideal for a site with difficult access as all items can be carried in and manually fixed into position without the need for machinery. Diamond Piers

SIZE

DP-50

DP-75E

DP-100E DP-200E

have been engineered for a range of construction types (loads) and soil conditions. Diamond Piers are engineered with two main components:

Weight (kg)

25.4

33.6

43.6

95.3

the pier and the pins. The concrete pier comes in a range of sizes, from the smallest 25kg (DP-50) to the largest 95kg (DP-200E)

Concrete Limit (kg)

1815

2722

4083

5444

depending on load. They have a single bolt fixing on top for easy use with standard stirrups. The pins are the main variable and are available in steel, galvanized steel, stainless steel and FRP which all

Pin Outside Diameter (mm)

33.4

42.4

48.3

60.3

vary in length to match the load and soil condition. To determine the right combination of pins and piers for your project

Bolt Diameter (in.)

Bolt Height (mm)

we need to consider:

•

Structure location

•

Structure load

•

Structure type

•

Soil report / information

Composite Materials

WHY USE COMPOSITE MATERIALS? Most composite materials in outdoor access structures are generally

Minimal maintenance

either Wood Plastic Composite (WPC) or Fibre Reinforced Plastic (FRP).

Quick and easy installation

They come in many different varieties for different applications and

Hard wearing and durable

offer solutions to some problems that natural or single component materials can not meet.

Resistant to insects Will not split, warp or rot

Wood Plastic Composites in access structures can be used as an alternative to timber decking and can adhere to pedestrian loads

No splinters

of up to 5kPa. Typically it is made from recycled wood compounds

No treatments or stain required

and polypropylene (engineered plastic) and is an environmentally

Resistant to water

friendly choice as it can contain as much as 100% recycled content.

Environmentally friendly, uses recycled plastic

WPC requires no staining, oil, lacquer or painting, it has a high UV resistance, doesn’t splinter and is extremely resistant to insect attack, fungi, rot and is corrosion free. Delivering a cost effective solution over the product’s life cycle for a low maintenance pedestrian decking material. Fibre Reinforced Plastic is commonly used as open grate decking or for structural sections for access applications. FRP decking is moulded into large size sheets with an open grate pattern allowing for debris to pass through the grate. It has a hard wearing non-slip surface and comes in many thicknesses, sizes and colours. Open grate decking is the perfect solution for beachside access structures and sandy locations, in addition to providing a water-

WPC DECKING BOARD

repellent non-slip surface for bikeways. Fibre Reinforced Plastic structural members are manufactured in a number of different ways, the fibre element provides the structural integrity. These fibres can comprise of different materials from glass strands to Kevlar. FRP structural sections don’t have the same strength as steel and require larger / thicker sections to provide the same strength. Both the FRP decking and structural sections provide high levels of

FRP STRUCTURAL SECTIONS

protection from UV degradation, insect attack, fungi, rot and corrosion. Composite materials are the perfect solution where environmental conditions are harsh or corrosive, where insect attack could occur and they are low maintenance. While these composite materials are flame retardant other material options may be better suited for areas prone to bushfires. Composite materials are also generally manufactured in standard shapes and sizes which can limit their applications.

FRP OPEN GRATE DECKING

Materials & Finishes We source our materials from quality suppliers who provide attention

We give the highest level of attention to our fittings and

to detail, repeatability and high scrutinisation of their products.

provide a choice of galvanised or stainless steel depending

We then manufacture accordingly to achieve the industry’s highest

on the application. We use, where possible, our proprietary

quality time after time as ensured by our ISO 9001 certification.

stainless steel anti-vandal fastening system in locations that are

Our pine is environmentally friendly plantation sourced and is stabilised and treated with Light Organic Solvent Preservatives (LOSP) to provide protection from insects and decay. It can be stained

susceptible to tampering as they not only deter vandals but have been found to reduce the theft and destruction of the access structures we supply.

or painted to further enhance it’s life, durability and appeal. Our hardwood is select-grade and sustainably-harvested western Queensland hardwood or similar stress grade F17 or better. It is treated with Ammoniacal Copper Quaternary (ACQ) for protection from insects and decay, which can be stained. We don’t recommend painting on hardwood because it releases natural tannins from the timber and diminishes the look of the finished paintwork. We can also use other types of timber species and finishes according to your requirements. TIMBER PAINT COLOURS

PINE STAINS

RAL / EPOXY / TWO PACK

HARDWOOD STAIN

POWDER COAT OPTIONS

WPC COLOUR SELECTION

Our steel is structural-grade and hot-dip galvanised as per AS/NZ 4680 for superior performance. It can be powder coated to provide a hard wearing protective coating, which is attractive and comes in many colour options. For a higher level of corrosive protection from the elements, we recommend using two-pack epoxy paint or thermoplastic coatings over galvanised steel structures. Aluminium is also a structural grade and usually chosen for its excellent anti-corrosive properties for those locations that are harshly affected, but due to the relatively lower strength (approximately 30% that of steel) there are some design issues that limit its use. Aluminium can be powder coated or anodised providing an attractive finish that comes in many colours, both two-pack paint and thermoplastic coatings can also be used to further enhance its natural anti-corrosive abilities. We use many other materials such as composites, plastics, glass, stainless steel, concrete and other timber species for varying applications. With pedestrian bridges we can use a range of structural materials, foundation and piers, decking types and balustrade options to cover a wide range of solutions for individual requirements.

ALUMINIUM ANODISED COLOURS (PML)

We can help you over any difficulty.

WITH OFFICES ACROSS AUSTRALIA AND NEW ZEALAND WE’VE GOT YOU COVERED

brisbane

perth adelaide

sydney

auckland

melbourne

Web landmarkpro.com.au Email sales@landmarkpro.com.au Call 1300 768 230

Access Structures

Our range of boardwalks and stairs allow easy and safe access through difficult or sensitive sites, while our viewing platforms offer a secure and enjoyable destination.

Making accessibility easy for everyone, everyday.

Info

Access Structures

Landmark designs, constructs and installs, boardwalks, viewing

Ultimately the outcome is a low impact environmental solution.

platforms, stairs and other pedestrian access structures to suit

Our access structures are supplied with instructions and engineering

specific site applications and environments. Our two main ranges

certificates that meet all relevant building codes and Australian

are based on the primary materials used: steel (Stromlo) and timber

Standard requirements.

(Timaru). We also use a variety of other materials including aluminium, Wood Plastic Composite (WPC) and Fibre Reinforced Plastic (FRP)

We have local staff in offices throughout Australia and New Zealand

depending on what is required for each structure type, application,

who understand that each access structure has different requirements

location and environment.

depending on location, community values, heritage, terrain and intended use. Ensuring a successful outcome for the community is an

All Landmark access structures are designed, drafted and

important step in each project and is of paramount importance to us.

engineered to meet or exceed the National Construction Code (NCC) and use relevant Australian Standards, such as AS 1170 Structural Design Actions, AS 1720 Timber Structures, AS 4100 Steel Structures, AS 5100 Bridge Design and AS 1428.1 Design for Access and Mobility. We also understand and apply (if relevant) flood loading, crowd loading (3kPa to 5kPa) and vehicle loading requirements,

along with many other relevant compliance requirements or requests.

LANDMARK IS BS OHSAS 18001:2007 CERTIFIED

Our in-house design and engineering teams have many years of

This international Occupational Health and Safety Management certification is proof of our commitment to best practice.

experience that you can rely on to achieve your desired result. We source our materials from quality suppliers who apply the highest level of attention to detail, repeatability and scrutinisation to their products. We then manufacture according to our ISO 9001 certification, which is the highest quality standard within the industry. To provide the utmost level of traceability, each and every access structure we supply carries a Landmark Traceability Plaque with a unique identification number. This allows our customers to trace and access product information easily should they ever need to maintain, upgrade or replicate an item. We place great importance on every individual component used in our products, right down to the fittings. We provide you with

LESS ON-SITE DISTURBANCE Our access structures are prefabricated and supplied in kit form guaranteeing less on-site disturbance, less noise and increased site safety.

a choice of galvanised or stainless steel fittings, depending on the application. We also use, where possible, our proprietary stainless steel anti-vandal fastening system in locations that are susceptible to

STAINLESS STEEL ANTI-VANDAL FASTENING SYSTEM Our fastening system deters vandalism and can reduce the incidence of theft and destruction.

tampering. This fastening system not only deter vandals but has been shown to reduce theft and destruction of the products we supply. Landmark access structures are prefabricated and supplied in flat pack kit form. The community benefits from shorter construction

TRACEABILITY PLAQUE Every structure we supply carries an individual serial number to ensure all product specification history is easily available for any maintenance requirements.

times and reduced noise pollution and increased on-site safety.

Contents

ACCESS STRUCTURES INFORMATION

ACCESS STRUCTURES DESIGN Timber

K1160 Series - Timaru

Steel

K1170 Series - Stromlo

ACCESS STRUCTURES ELEMENTS

Diamond Piers

Composite Materials

Materials and Finishes

Timber

Access Structures

Enduring natural beauty.

K1160 Series - Timaru Timber access structures are naturally enduring and resistant to corrosion, making them ideal for coastal locations and harsh environments. As well as its obvious natural beauty, timber can be used to complement a range of landscape designs, from traditional and heritage sites through to cosmopolitan or contemporary spaces.

Timber

STANDARD FEATURES

Access Structures

Precision manufactured components and hardware Preprocessed manufacturing Professional building application drawings Independent engineering certification

STANDARD TIMBER ACCESS STRUCTURES The natural beauty and resilience of timber makes it the perfect choice for harsh, corrosive coastal environments. Timber can also easily blend

Comprehensive installation instructions Galvanised steel as per AS/NZS 4680:2006 Pine is quality plantation and LOSP treated

into any existing landscape. Each Landmark timber access structure is

Hardwood is select grade and ACQ treated

designed and manufactured according to individual requirements.

Stainless steel anti-vandal fastening system where applicable

Engineering is vital when designing and manufacturing access structures, which is why we comply with the National Construction

High-grade penetrating timber treatment stain

Code and apply all necessary standards where applicable. We consider

with colour tones

flood, crowd and vehicular loading either together or as separate

STANDARD OPTIONS

requirements. While we have a large selection of standard features and options to cover the most common requirements, we are also

A selection of hand rail, kick rail and barrier panels

able to adapt a project by using many different materials to give you

Bicycle and disabled access rails

unlimited flexibility.

Specialised piers for sensitive or remote sites

All Landmark timber access structures are prefabricated and supplied

Fibre Reinforced Plastic (FRP) structural sections

in flat pack kit form with instructions and engineering certificates to meet all relevant building codes and Australian Standard requirements.

Wood Plastic Composite (WPC) decking Fibre Reinforced Plastic (FRP) grate decking Galvanised or stainless steel fixings

K1161 BOARDWALKS

K1162 VIEWING PLATFORMS

K1163 STAIRS & OTHER

Steel

Access Structures

Fortifying strength with design ďŹ&#x201A;exibility.

K1170 Series - Stromlo Steel-based access structures offer great design flexibility due to their inherent strength and modern fabrication techniques. Steel can be easily designed to suit a new or modern site and can also be crafted to match an existing space, all while still being cost-effective. These features make it the preferred choice for many access structures.

STANDARD FEATURES

Steel

Precision manufactured components and hardware

Access Structures

Preprocessed manufacturing Professional building application drawings Independent engineering certification Comprehensive installation instructions Galvanised steel as per AS/NZS 4680:2006

STANDARD STEEL ACCESS STRUCTURES The strength and flexibility of steel enables designers to have

Stainless steel anti-vandal fastening system where applicable

great choice in producing either low-cost structures based on standard

STANDARD OPTIONS

steel profiles or creating a unique design based on the many different manufacturing techniques available. We hot-dip galvanise all of

Powder coated, two-pack epoxy paint or thermoplastic coatings

our steel according to Australian Standards 4680/2006 using only

A selection of hand rail, kick rail and barrier panels

suppliers with recognised quality management systems to ensure

Bicycle and disabled access rails

we provide only the best structures. Each Landmark steel

Specialised piers for sensitive or remote sites

access structure is designed and manufactured according to individual requirements.

Fibre Reinforced Plastic (FRP) structural sections Wood Plastic Composite (WPC) decking

Engineering is vital when designing and manufacturing access structures, which is why we comply with the National Construction Code and apply all necessary standards where applicable.

Fibre Reinforced Plastic (FRP) grate decking Galvanised or stainless steel fixings

We consider flood, crowd and vehicular loading, together or as separate requirements. While we have a large selection of standard features and options to cover most common requirements,

All Landmark steel access structures are prefabricated, supplied in flat

we can also manufacture using many different materials, giving you

pack kit form with instructions and engineering certificates to meet all

unlimited flexibility.

relevant building codes and Australian Standard requirements.

K1171 BOARDWALKS

K1172 VIEWING PLATFORMS

K1173 STAIRS & OTHER

Diamond Piers

CONCRETE PIER HEAD ANCHOR BOLT

INSPECTION CAP

GROUND LEVEL

EXISTING SOIL

Construction without excavation is now easier with our Diamond Pier

BEARING PIN

foundations. Diamond Piers are commonly used on installations at sensitive, problematic or hard-to-reach sites. Diamond Piers can also be used for standard site installations to reduce noise (heavy machinery is not required) and they allow the structure above

INSPECTION PLUG

to be easily removed or relocated if required. These piers are also ideal for a site with difficult access as all items can be carried in and manually fixed into position without the need for machinery.

SIZE

DP-50

DP-75E

DP-100E DP-200E

Diamond Piers have been engineered for a range of construction types (loads) and soil conditions. Diamond Piers are engineered with two main components:

Weight (kg)

25.4

33.6

43.6

95.3

the pier and the pins. The concrete pier comes in a range of sizes, from the smallest 25kg (DP-50) to the largest 95kg (DP-200E)

Concrete Limit (kg)

1815

2722

4083

5444

Pin Outside Diameter (mm)

33.4

42.4

48.3

60.3

vary in length to match the load and soil condition. To determine the right combination of pins and piers

Bolt Diameter (in.)

Bolt Height (mm)

for your project we need to consider:

•

Structure location

•

Structure load

•

Structure type

•

Soil report / information

Composite Materials

WHY USE COMPOSITE MATERIALS? Most composite materials in outdoor access structures are generally

Minimal maintenance

either Wood Plastic Composite (WPC) or Fibre Reinforced Plastic (FRP).

Quick and easy installation

They come in many different varieties for different applications and

Hard wearing and durable

offer solutions to some problems that natural or single component materials can not meet.

Resistant to insects Will not split, warp or rot

Wood Plastic Composites in access structures can be used as an alternative to timber decking and can adhere to pedestrian loads

No splinters

of up to 5kPa. Typically it is made from recycled wood compounds and

No treatments or stain required

polypropylene (engineered plastic) and is an environmentally friendly

Resistant to water

choice as it can contain as much as 100% recycled content.

Environmentally friendly, uses recycled plastic

WPC DECKING BOARD

FRP STRUCTURAL SECTIONS

FRP OPEN GRATE DECKING

Materials & Finishes We source our materials from quality suppliers who provide

We use many other materials such as composites, plastics,

attention to detail, repeatability and high scrutinisation of their

glass, stainless steel, concrete and other timber species for

products. We then manufacture accordingly to achieve the

varying applications. With access structures we can use a range

industry’s highest quality time after time as ensured by our

of structural materials, foundation and piers, decking types and

ISO 9001 certification.

balustrade options to cover a wide range of solutions for

Our pine is environmentally friendly plantation sourced and

individual requirements.

is stabilised and treated with Light Organic Solvent Preservatives

We give the highest level of attention to our fittings and

(LOSP) to provide protection from insects and decay.

provide a choice of galvanised or stainless steel depending

It can be stained or painted to further enhance it’s life,

on the application. We use, where possible, our proprietary

durability and appeal.

stainless steel anti-vandal fastening system in locations that are

Our hardwood is select-grade and sustainably-harvested western Queensland hardwood or similar stress grade F17 or better. It is treated with Ammoniacal Copper Quaternary (ACQ)

susceptible to tampering as they not only deter vandals but have been found to reduce the theft and destruction of the access structures we supply.

for protection from insects and decay, which can be stained. We don’t recommend painting on hardwood because it releases natural tannins from the timber and diminishes the look of the finished paintwork. We can also use other types of timber species and finishes according to your requirements. Our steel is structural-grade and hot-dip galvanised as per AS/NZ 4680 for superior performance. It can be powder coated to provide a hard wearing protective coating, which is attractive

TIMBER PAINT COLOURS

PINE STAINS

and comes in many colour options. For a higher level of corrosive protection from the elements, we recommend using two-pack epoxy paint or thermoplastic coatings over galvanised steel structures. Aluminium is also a structural grade and usually chosen for its excellent anti-corrosive properties for those locations that

EPOXY / TWO PACK COLOURS HARDWOOD STAIN

are harshly affected, but due to the relatively lower strength (approximately 30% that of steel) there are some design issues that limit its use. Aluminium can be powder coated or anodised providing an attractive finish that comes in many colours, both two-pack paint and thermoplastic coatings can also be used to further enhance its natural anti-corrosive abilities. POWDER COAT OPTIONS

WPC COLOUR SELECTION

Providing you with successful pathways.

WITH OFFICES ACROSS AUSTRALIA AND NEW ZEALAND WE’VE GOT YOU COVERED

brisbane

perth adelaide

sydney

auckland

melbourne

Web landmarkpro.com.au Email sales@landmarkpro.com.au Call 1300 768 230

Street & Park Furniture

Select from a large range of quality public furniture including barbecues, benches, bicycle stands, bin surrounds, bollards, drinking fountains, picnic settings and seats.

We have a huge range of furniture to compliment any community space.

Info

Street & Park Furniture

LANDMARK IS BS OHSAS 18001:2007 CERTIFIED This international Occupational Health and Safety Management certification is proof of our commitment to best practice.

SOLUTIONS FOR YOUR ENVIRONMENT

Landmarkâ&#x20AC;&#x2122;s range of street and park furniture includes many standard designs, sizes, finishes and options. We can also custom design to suit site-specific applications providing the optimum solution. We source our materials from quality suppliers who employ a high degree of scrutiny and attention to detail as well as offering repeatability. We then manufacture according to our

TRACEABILITY PLAQUE Every structure we supply carries an individual serial number to ensure all product specification history is easily available for any maintenance requirements.

ISO 9001 certification, which is the highest quality standard within the industry. To provide the utmost level of traceability, each and every piece of Landmark furniture we supply carries a Landmark plaque with a unique identification number. This allows

PROUDLY PARTNERED WITH FURPHY FOUNDRY Furphy Foundry, based in Shepparton Victoria, is an iconic Australian manufacturer with over 150 years experience. They have built an extensive portfolio of urban designed furniture.

our customers to trace and access structural information easily should they ever need to maintain, upgrade or replace an item.

OUR EUROPEAN PARTNER SANTA & COLE

Landmark also offers furniture from Furphy Foundry.

We carry a select range of designer furniture from Spanish company Santa & Cole - providing European excellence in design, form and function.

Over the past 150 years, Furphy Foundry has grown from an agricultural implement maker to a diversified foundry and manufacturing company specialising in urban design products, street and park furniture and outdoor structures. All Furphy Foundry products are also manufactured under an ISO 9001 quality management system. Landmark has a select range of designer furniture from Spanish company Santa & Cole providing European excellence in design form and function. We have local staff in offices throughout Australia and New Zealand who understand that street and park furniture has different requirements depending on location, community values, heritage, terrain and intended use. Ensuring a successful outcome for the community is an important step in each project and is of paramount importance to us. 1

Contents

STREET & PARK FURNITURE INFORMATION

STANDARD DESIGNS Barbecues

Benches

Bicycle Stands

Bin Surrounds

Bollards

Drinking Fountains

Picnic Settings

Seating

STREET & PARK FURNITURE ELEMENTS

Materials and Finishes

Custom Designs

Barbecues

Street & Park Furniture

High in features, low maintenance.

KB200 Range - Eco Barbecues A prefabricated, safe, low maintenance barbecue using high quality stainless steel materials. Environmentally friendly and designed for maximum use and accessibility.

Barbecues

STANDARD FEATURES 1

Treated stainless steel hot plate with thermal gasket

300mm safety zone around hot plate

Fully welded and bevelled corners and edges

6-volt on/off illuminated button (6 sec delay / 30 min cycle time)

10-amp electrical connection using a low 8 amps

Full stainless steel construction (18mm FC sheeting backing)

Easy gliding fat collection trays

IP65 rated for easy cleaning

Fully assembled

800mm high for accessibility

Street & Park Furniture

STANDARD OPTIONS

STANDARD KB200 RANGE - ECO BARBECUE

Powder coated sides and door panels

The Eco barbecue range is the perfect solution for providing public

Hardwood timber design features to panels

cooking amenities. The safety zone around the hotplate, countertop

CUSTOM SOLUTIONS

with bevelled edge and corners, 6-volt button and thermal gasket are

Landmark can also develop a barbecue solution based on the Eco range to suit your requirements.

design elements incorporated for community safety. The fully stainless steel construction (including frame and hot plate) and IP65-rated electronic housing allows for quick and easy cleaning schedules or

graffiti removal with pressure cleaners. The low 8-amp draw can be connected to 10-amp domestic power and all barbecues are fully factory built for quick, on-site installation. If you have specific requirements, Landmark can also develop a barbecue solution based

2 3

4 4

on the Eco range to suit your needs.

KB201 - SINGLE PLATE BARBECUE

KB202 - DOUBLE PLATE BARBECUE

KB203 - SINGLE PLATE RIGHT HAND BARBECUE

KB204 - SINGLE PLATE LEFT HAND BARBECUE

Benches

Street & Park Furniture

Relaxed seating.

Benches Cost-effective seating that provides an enduring, relaxed-style suited to the high demands of urban and community spaces.

Benches

Street & Park Furniture

STANDARD BENCH SEATING Bench seating is used to provide a place to relax along walkways, community gathering spots and social destinations. Our standard range of benches are functional and aesthetically appealing. They are available in various designs and materials allowing for different environments and applications. Landmark can also custom engineer, manufacture and install to your site-specific application, providing you the optimum solution.

K001 - TAMWORTH BENCH

standard: frame: pine / HW / HDG ST / SC slats: pine / HW / SC fixing: in-ground / bolt-down h: 500 w: 400 l: 1800 / 2100 options: PC / 2P

K005 - TUMUT PLATFORM BENCH

standard: frame: HDG ST slats: pine / HW / SC fixing: in-ground / bolt-down h: 430 w: 600 l: 2000 / 3000 / 4000 / 5000 / 6000 options: PC / 2P

KA001 - ALTHORPE BENCH

standard: frame: AL / PC slats: AL / PC fixing: bolt-down h: 450 w: 300 l: 1800 / 2100 options: 2P

KF031 - PROMENADE BENCH

standard: frame: CAL / SS / MF / PC slats: HW / SS / SC fixing: in-ground / bolt-down h: 450 w: 430 l: 1800 options: 2P

K003 - TUMUT PLATFORM BENCH

standard: frame: HDG ST slats: pine / HW / SC fixing: in-ground / bolt-down h: 460 square setting: 1500 / 1800 / 2100 options: PC / 2P

K052 - SAN MARCO BENCH

standard: frame: CAL slats: HW / AAL / SC fixing: in-ground / bolt-down h: 450 w: 350 l: 1800 / 2100 options: PC / 2P

KF011 - METRO BENCH

standard: frame: CAL / MF / PC slats: HW / SC fixing: concealed bolt-down h: 425 w: 430 l: 1800 options: 2P

KF071 - WOODGROVE BENCH

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: in-ground / bolt-down h: 455 w: 440 l: 1815 options: 2P

K004 - TUMUT PLATFORM TREE SURROUND

standard: frame: HDG ST slats: pine / HW / SC fixing: in-ground / bolt-down h: 460 w: 470 l: 1500 / 1800 / 2100 options: PC / 2P

K071- DAINTREE BENCH

standard: frame: HDG ST / HDG / PC slats: WPC fixing: in-ground / bolt-down h: 455 w: 440 l: 1815 options: 2P

KF021- FULCRUM BENCH

standard: frame: CAL / MF / PC slats: HW / SC fixing: concealed bolt-down h: 435 w: 435 l: 1800 options: 2P

KF127 - STEEL SLATTED BENCH

standard: frame: HDG ST / PC slats: HDG ST / PC fixing: in-ground / bolt-down h: 460 w: 450 / 645 l: 2005 options: 2P

Benches

Street & Park Furniture

KF128 - CIVIC BENCH

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: bolt-down h: 435 w: 445 l: 1800 options: 2P

KF132 - STEEL SLATTED COUNCIL BENCH

standard: frame: CAL / MF / PC slats: HDG ST / PC fixing: bolt-down h: 460 w: 450 l: 2000 options: 2P

KF135 - LYNDARUM BENCH

standard: frame: SS slats: HW / SC fixing: in-ground / bolt-down h: 470 w: 535 l: 1815

KSC061 - NEOBANQUETA

standard: frame: sandblasted AL slats: HW / SC fixing: hidden pin fixing h: 430 w: 490 l: 600 / 1500 / 1750 / 3000 / 4500 / 6000 options: PC / 2P

KF129 - DELTA BENCH

standard: frame: CAL / MF / PC slats: HW /SC fixing: bolt-down h: 430 w: 410 l: 1840 options: 2P / arm rests

KF133 - FORESHORE BENCH

standard: fframe: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 470 w: 345 l: 1800 options: 2P

KSC020- COMUNITARIO

standard: frame: HDG ST slats: HW / SC fixing: bolt-down h: 370 w: 880 l: 3000 / 4000 options: PC / 2P

KF131 - PLAZA BENCH

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 475 w: 640 l: 1840 options: 2P / logos

KF134 - OMEGA BENCH

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 435 w: 605 l: 1800 options: 2P

KSC041 - MOON BENCH

standard: frame: HDG ST slats: HW / SC fixing: hidden pin fixing h: 400 w: 770 l: 1800 / 2500 / 3000 options: PC / 2P

KSC071 - NU BENCH

standard: frame: HDG ST slats: HW / SC fixing: bolt-down h: 400 w: 590 l: 2580 / 3700 options: PC / 2P

SS - stainless steel / ST - steel / AL - alumimium / CAL - cast aluminium / AAL - anodised aluminium / HW - hardwood / WPC - wood plastic composite / MF - mill finish / HDG - hot dipped galvanised / PC - powder coated / 2P - two pack paint / PP - painted pine / SC - stain colour

Bicycle Stands

Street & Park Furniture

Convenient cycle safety.

Bicycle Stands With a growing number of public parklands and cycle ways, plus an increasing emphasis on bicycle accessibility, it is important to provide secure storage locations for cyclists at convenient locations.

Bicycle Stands

Street & Park Furniture

STANDARD BICYCLE STANDS

KF401 - SINGLE BICYCLE STAND

There are several ideal options to provide enough space for multiple users or our standard range can be modified for further specific requirements. Stainless steel ensures strength and a modern appearance. Landmark can also custom engineer, manufacture and install to your site-specific application, providing you the optimum solution. KF402- FOUR BAY SPIRAL BICYCLE STAND

standard: materials: SS 304 or 316 fixing: in-ground / bolt-down sizes: dia. 50.8mm (2”) h: 800 l: 2630

KSC305 - SAMMY BOLLARD

standard: materials: cast iron finish: protected with cataphoretic treated (antirust protection) black paint fixing: hidden pin fixing sizes: dia. 110mm (2”) h: 920

KSC406 - TACTIL STAND

standard: materials: cor ten ST / HDG ST / PC fixing: hidden pin fixing sizes: h: 900 w: 200 d: 20

standard: materials: SS 304 or 316 fixing: in-ground / bolt-down sizes: dia. 50.8mm (2”) h: 900 l: 1000

KF403 - BOLLARD BICYCLE STAND

standard: material: SS 304 finish: polished fixing: in-ground / bolt-down sizes: dia. 141mm h: 1000 l: 260

KSC405 - BICILINEA MULTI STAND

standard: materials: SS 304 fixing: hidden pin fixing sizes:dia. 50.8mm (2”) h: 900 l: 3000 / 6000 / 9000 d: 1590

KSC407 - KEY STAND

standard: materials: ST finish: high density polyurethane foam in red or black fixing: hidden pin fixing sizes: dia. 70mm h: 800 w: 570

Bin Surrounds

Street & Park Furniture

Clean and tidy waste solutions.

Bin Surrounds An attractive addition to enhance rubbish bins in any area, offering the best way to manage waste and sort refuse while ensuring public safety and security.

Bin Surrounds

Street & Park Furniture STANDARD BIN SURROUNDS Bin surrounds have various functions including hiding open rubbish, containing odours and separating different refuse types (rubbish or recycle). Landmarkâ&#x20AC;&#x2122;s

bin surrounds are available in a range of designs to match with different settings and can include a variety of lettering and logos. All our bin surrounds are fully lockable and come with a tri-guard lock and key system to provide the utmost security. Landmark can also custom engineer, manufacture and install to your site-specific application, providing you the optimum solution.

K076 - DAINTREE BIN SURROUND

standard: opening: standard / circular (recycle) frame: HDG ST / PC panels: WPC fixing: bolt-down sizes: 120L / 240L h: 1155 / 1250 w: 600 / 700 d: 660 / 840 options: 2P

KF054 - STREETSMART BIN SURROUND

standard: opening: standard / circular (recycle) frame: HDG ST / PC / SS lid panels: HDG ST / PC fixing: bolt-down sizes: 120L h: 1075 w: 570 d: 570 options: 2P

KF736 - AVENUE BIN SURROUND

standard: opening: standard / circular (recycle) frame: HDG ST / PC panels: HW / SC / ST fixing: bolt-down sizes: 120L/ 240L h: 1150 / 1250 w: 600 / 700 d: 660 / 840 options: 2P / SS / pyramid lid

KF739- BALLART BIN SURROUND standard: opening: standard frame: ST / PC panels: ST / PC fixing: bolt-down sizes: 120L h: 1290 w: 565 d: 565 options: circular opening / 2P / logos

KF014 - METRO BIN SURROUND

standard: opening: standard / circular (recycle) frame: CAL panels: SS 304 fixing: bolt-down sizes: 120L h: 1220 w: 570 d: 650 options: PC frame / 2P

KF074 - WOODGROVE BIN SURROUND

standard: opening: standard / circular (recycle) frame: HDG ST / PC panels: HW / SC fixing: bolt-down sizes: 120L / 240L h: 1155 / 1250 w: 600 / 700 d: 660 / 840 options: 2P

KF737- OASIS BIN SURROUND

standard: opening: standard / posts 175 high frame: SS 304 panels: SS 304 fixing: bolt-down sizes: 120L/ 240L h: 1065 w: 660 d: 660 options: ST/ PC / 2P / logos

KF741- CONCORSE BIN SURROUND standard: opening: standard frame: HDG ST / PC panels: HDG ST / PC / SS lid fixing: bolt-down sizes: 120L h: 1185 w: 575 d: 600 options: 2P / logos

KF044 - CORIO BIN SURROUND

standard: opening: standard / circular (recycle) frame: HDG ST/ PC panels: HDG ST / PC fixing: bolt-down sizes: 120L / 240L h: 1150 / 1250 w: 600 / 700 d: 660 / 840 options: 2P

KF721- FULCRUM BIN SURROUND

standard: opening: standard frame: CAL / MF / PC panels: SS 304 fixing: bolt-down / adjustable brass feet sizes: 120L h: 1185 w: 600 d: 600 options: 2P

KF738- CORSO BIN SURROUND

standard: opening: standard / circular (recycle) frame: CAL panels: SS 304 fixing: bolt-down sizes: 120L/ 240L h: 1240 / 1420 w: 635 / 810 d: 575 / 750 options: ST / PC frame / 2P / logos

KF750- DOGGIE BIN SURROUND standard: opening: standard frame: HDG ST panels: ST / PC / SS lid fixing: bolt-down sizes: 80L / 120L h: 1300 w : 565 d: 565 options: external bag dispenser / logos

KF751- ROADSIDE BIN SURROUND standard: opening: standard /circular (recycle) frame: HDG ST / PC panels: HDG ST / PC / HW slats / SC / SS lid fixing: bolt-down sizes: 120L / 240L h: 1175 / 1285 w: 580 / 830 d: 610 / 835 options: 2P / WPC slats / logos

Bollards

Street & Park Furniture

Safe control and warning.

Bollards Help slow, direct and control all types of traffic as well as highlight safety hazards or concerns in busy public areas.

Bollards

Street & Park Furniture STANDARD BOLLARDS Bollards help guide and control the direction of all types of traffic in busy areas, prohibited zones and sensitive sites where pedestrian or vehicle safety is required. Our bollards are available in a range of designs and materials to complement a variety settings. Landmark can also custom engineer, manufacture and install to your site-specific application, providing you the optimum solution. KB301 - LANDMARK STEEL BOLLARD

standard: material: HDG ST finish: PC fixing: in-ground / removable sizes: dia. 101mm x 900mm head designs: 1, 2, 3, 4, 5, 6 skirt designs: 1, 2 options: 2P

KB303 - SOUTHBANK BOLLARD

standard: material: SS finish: satin bead blasted fixing: in-ground / removable sizes: dia. 114mm x 800mm

KB304 - TIMBER BOLLARD

standard: material: HW / CAL head and skirt finish: SC fixing: in-ground / removable sizes: dia. 200mm x 1010mm options: PC / 2P / rope or chain

KF307 - STAINLESS STEEL BOLLARD

standard: material: SS 304 finish: polished fixing: in-ground / bolt-down / removable sizes: dia. 140 / 165mm x 980mm options: chain and eyebolts

KF309 - BARRIER BOLLARD

standard: material: HDG ST finish: PC fixing: in-ground / bolt-down / removable sizes: dia. 165mm x 1000mm options: 2P / reflective tape

KF306 - 165 DOME TOP BOLLARD

standard: material: HDG ST finish: PC fixing: in-ground / bolt-down / removable sizes: dia. 140mm / 165mm x 1000mm options: 2P

KF308 - TRAVERSE BOLLARD

standard: material: HDG ST finish: PC fixing: in-ground / bolt-down sizes: dia. 125mm x 1000mm options: 2P / coloured recess bands

KF310 - LONDON BOLLARD

standard: material: CAL finish: PC fixing: in-ground / bolt-down / removable sizes: 1000mm high options: 2P / chain and eyebolts

KF311 - B11 BOLLARD

standard: material: HDG ST / CAL head finish: PC fixing: in-ground / bolt-down / removable sizes: dia. 168mm x 1000mm options: PC / 2P / chain and eyebolts

Bollards

Street & Park Furniture

KF312 - EDGE WATER BOLLARD

standard: material: CAL finish: MF / PC fixing: bolt-down sizes: 1045mm high options: 2P

KF313 - OLDE SYDNEY BOLLARD

standard: material: CAL finish: MF / PC fixing: bolt-down sizes: 1000mm high options: 2P

KF314 - CORSO BOLLARD

standard: material: CAL finish: MF / PC fixing: bolt-down sizes: 900mm high options: 2P

KF315 - ST KILDA BOLLARD

standard: material: HDG ST finish: HDG / PC fixing: bolt-down sizes: 1000mm high options: 2P

K316F - GABLE BOLLARD

standard: material: HDG ST finish: HDG / PC fixing: in-ground / bolt-down / removable sizes: sq. 150 x 1030mm high options: 2P

KF403 - BOLLARD BICYCLE RACK

standard: material: SS 304 finish: polished fixing: in-ground / bolt-down sizes: dia. 141 / 168mm x 980mm options: chain and eyebolts

KSC406 - TACTI

KSC305 - SAMMY BOLLARD

standard: materials: cast iron finish: anti-corrosion treatment in black fixing: hidden pin fixing sizes: dia. 110mm (2â&#x20AC;?) h: 920 w: 1500 / 1540 options: 2P

standard: materials: cor ten ST / HDG ST finish: HDG / PC fixing: hidden pin fixing sizes: h: 900 w: 200 d: 20 options: 2P

KSC407 - KEY

standard: materials: ST finish: high density polyurethane foam in red or black fixing: hidden pin fixing sizes: dia. 70mmh: 800 w: 570

Drinking Fountains Street & Park Furniture

Community hydration.

Drinking Fountains Drinking fountains provide a hygienic service in community areas where fresh water is required in a public setting.

Drinking Fountains Street & Park Furniture

STANDARD DRINKING FOUNTAINS Drinking fountains deliver fresh water in a convenient way in parks and other public areas to a range of recreational users. Landmarkâ&#x20AC;&#x2122;s fountains are available in many designs and materials to cater for different settings and requirements including wheelchair accessibility. Added tap options increase convenience by allowing sprinklers and hoses to be connected for area service and maintenance tasks. Such amenities can also provide pets a place to access water. Landmark can custom engineer, manufacture and install to your specific application, providing you the optimum solution. KF501 - FORESHORE

standard: material: SS 316 finish: polished fixing: bolt-down sizes: 240mm x 800mm x 900mm options: swivel dog bowl (fixed dog bowl standard)

KF502W - CASCADE OFFSET FOUNTAIN

standard: material: HDG ST / SS finish: PC fixing: bolt-down sizes: dia. 455mm x 900mm options: 2P / dog bowl / tap

KF502 - CASCADE FOUNTAIN

standard: material: HDG ST / SS finish: PC fixing: bolt-down sizes: dia. 455mm x 950mm options: 2P / dog bowl / tap

KF553- SANDFORD FOUNTAIN

standard: material: HDG ST / SS finish: PC fixing: bolt-down / rag bolt sizes: 915mm high options: 2P / dog bowl / tap

KF554 - LONDON FOUNTAIN

standard: material: CAL / SS finish: PC fixing: bolt-down sizes: 875mm high options: 2P / dog bowl / tap

Picnic Settings

Street & Park Furniture

Outdoor social settings.

Picnic Settings Enduring picnic settings suited to the high demands of popular public areas - available in a selection of hardwearing materials and desirable designs.

Picnic Settings

Street & Park Furniture

STANDARD PICNIC SETTINGS Picnic settings provide space for social gatherings. Our standard range is functional and aesthetically appealing, allowing them to fit into any local environment. Picnic settings are also available in a range of variations and materials catering for various conditions and requirements including wheelchair accessibility. Landmark can also custom engineer, manufacture and install to your site-specific application, providing the optimum solution.

K030 - TAROOM SETTING

standard: frame: HDG ST / HDG / PC slats: pine / HW / SC fixing: in-ground / bolt-down h: 455 / 850 w: 290 / 740 (1520) l: 1800 / 2100 / 3000 / 4200 / 6000 options: 2P / PP / wheel chair access one or both ends

K073 - DAINTREE SETTING

standard: frame: HDG ST / HDG / PC slats: WPC fixing: in-ground / bolt-down h: 460 / 780 w: 440 / 790 (1670) l: 1810 options: 2P

KF013 METRO SETTING

standard: frame: CAL / MF / PC slats: hardwood / SC fixing: bolt-down h: 425 / 755 w: 430 / 790 (1640) l: 1800 options: 2P / wheel chair access one or both ends

KF073 - WOODGROVE SETTING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: in-ground / bolt-down h: 460 / 780 w: 440 / 790 (1650) l: 1815 options: 2P / square / circular / all-in-one

K060 - SAN REMO SETTING

standard: frame: AL / MF / PC slats: HW / AAL / SC / PC fixing: in-ground / bolt-down h: 430 / 680 w: 350 / 760 (1650) l: 1800 / 2100 / 3000 / 4200 / 6000 options: 2P / wheel chair access both ends and sides

K073S - DAINTREE SETTING (Square)

standard: frame: HDG ST / HDG / PC slats: WPC fixing: in-ground / bolt-down h: 440 / 820 w: 2980 l: 2980 options: 2P

KF023 FULCRUM SETTING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 435 / 755 w: 425 / 790 (1640) l: 1800 options: 2P / wheel chair access one or both ends

KF627 - STEEL SLATTED SETTING

standard: frame: HDG ST / HDG / PC slats: HDG ST / HDG / PC fixing: in-ground / bolt-down h: 460 / 800 w: 570 l: 2005 options: 2P

K061 - SAN REMO SETTING (Split Seats)

standard: frame: AL / MF / PC slats: HW / AAL / SC / PC fixing: in-ground / bolt-down h: 450 / 750 w: 290 / 760 (1530) l: 1800 / 2100 / 3000 / 4200 / 6000 options: 2P / wheel chair access both ends and sides

KA040 - ALTHORPE SETTING

standard: frame: AL / MF / PC slats: AL / MF / PC fixing: in-ground / bolt-down h: 455 / 725 w: 270 / 750 (1525) l: 2100 options: 2P / wheel chair access both ends and sides

KF033- PROMENADE SETTING

standard: frame: CAL / SS / MF / PC slats: HW / SC fixing: in-ground / bolt-down h: 445 / 770 w: 430 / 790 (1650) l: 1800 options: wheel chair access one end

KF628 - CIVIC SETTING

standard: frame: HDG ST / HDG / PC slats: HW /SC fixing: bolt-down h: 435 / 750w: 445 / 740 l: 1800 options: 2P / wheel chair access one or both ends

Picnic Settings

Street & Park Furniture

KF629 - DELTA SETTING

standard: frame: CAL / MF / PC / wheel chair access both ends slats: HW / SC fixing: bolt-down h: 430 / 755 w: 440 / 805 (1690) l: 1875 options: 2P / arm rests

KF633- FORESHORE SETTING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 470 / 785 w: 345 / 785 (1475) l: 1800 options: 2P

KF643 - VICTORIA SETTING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: in-ground h: 450 / 785 w: 450 / 890 (1785) l: 1800 options: 2P / 2 seats / 4 seats

KF631 - PLAZA SETTING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 460 / 735 w: 640 / 780 (2095) l: 1800 options: 2P / logos and text

KF634 - OMEGA SETTING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 435 / 775 w: 605 / 755 (1520) l: 1800 options: 2P

KF632 - STEEL SLATTED COUNCIL

standard: frame: CAL / PC / wheel chair access both ends slats: HDG ST / PC fixing: bolt-down h: 435 / 810 w: 615 / 800 (2010) l: 2005 options: 2P

KF635 - LYNDARUM SETTING

standard: frame: SS 304 slats: HW /SC / SS 304 table top fixing: in-ground / bolt-down h: 470 / 765 w: 530 / 960 (2035) l: 1935 options: square or round feet

KF644 - PARK LANE SETTING

standard: frame: HDG ST / HDG / PC slats: HW / SC / SS 304 table top fixing: in-ground / bolt-down h: 420 / 750 w: 450 / 960 (1860) l: 1800 options: 2P

Seating

Street & Park Furniture

Comfortable rest.

Seating Sturdy supportive solutions that will withstand the demands of high use public spaces and invite users to take a seat in style.

Seating

Street & Park Furniture STANDARD SEATING Seating is used to provide a supportive resting place along walkways, in community gathering spots and at social destinations. Our standard range of seating is both functional and aesthetically appealing. Our seats are available in a range of designs, sizes and materials allowing for various

environments and uses. Landmark can also custom engineer, manufacture and install to your site-specific application, providing you the optimum solution. K002 - TAMWORTH SEATING

standard: frame: pine / HW / HDG ST / SC / PC slats: pine / HW / SC fixing: in-ground / bolt-down h: 500 / 920 w: 600 l: 1800 / 2100 options: PP

K072 - DAINTREE SEATING

standard: frame: HDG ST / HDG / PC slats: WPC fixing: in-ground / bolt-down h: 790 w: 555 l: 1800 options: 2P / arm rests

KF033 - PROMENADE SEATING

standard: frame: CAL/ SS 304 / MF / PC slats: HW / SC fixing: in-ground / bolt-down h: 840 w: 610 l: 1800 options: 2P

KF227 STEEL SLATTED SEATING

standard: frame: HDG ST / HDG / PC slats: HDG ST / HDG / PC fixing: in-ground / bolt-down h: 440 / 800 w: 620 l: 1965 options: 2P / arm rests

KF232 - STEEL SLATTED COUNCIL SEATING

standard: frame: CAL / MF / PC slats: HDG ST / HDG / PC fixing: bolt-down h: 440 / 800 w: 620 l: 1965 options: 2P / logo

K050 - SAN MARCO SEATING

standard: frame: CAL / MF / PC slats: HW / AAL / SC / MF / PC fixing: in-ground / bolt-down h: 450 / 815 w: 650) l: 1800 / 2100 options: 2P

KF012 - METRO SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 820 w: 635 l: 1800 options: 2P

KF073 - WOODGROVE SEATING

standard: frame: HDG ST/ MF/ PC slats: HW / SC fixing: in-ground / bolt-down h: 885 w: 565 l: 1800 options: 2P / arm rests

KF228 - CIVIC SEATING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: bolt-down h: 445/ 795 w: 620 l: 1800 options: 2P

KF233 - FORESHORE SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 465 / 825 w: 660 l: 1800 options: 2P

K051 - SAN MARCO WALL MOUNT

standard: frame: CAL / MF / PC slats: HW / AAL / SC / MF / PC fixing: in-ground / bolt-down h: 450 / 750 w: 290 / 760 (1530) l: 1800 / 2100 options: 2P

KF022 - FULCRUM SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 830 w: 640 l: 1835 options: 2P

KF225 - SOUTHBANK SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 450 / 880 w: 665 l: 1895 options: 2P

KF229 - DELTA SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 455 / 800 w: 610 l: 1910 options: 2P

KF234 - OMEGA SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 435 / 870 w: 600 l: 1800 options: 2P / logo

Seating

Street & Park Furniture KF235 - LYNDARUM SEATING

standard: frame: SS 304 slats: HW / SC fixing: in-ground / bolt-down h: 470 / 880 w: 620 l: 1815 options: arm rests

KF242 - FRANKSTON SEATING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: in-ground / bolt-down h: 830 w: 655 l: 1800 options: 2P

KF247 - ALBERT PARK SEATING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: bolt-down h: 430 / 880 w: 700 l: 1930 options: 2P

KF252 - PLANTATION SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 450 / 790 w: 760 l: 1850 options: 2P

KSC010 - BANCAL

standard: frame: HDG ST / HDG slats: HW / SC fixing: hidden pin fixing h: 450 / 780 w: 510 l: 2450/ 4480 options: PC / 2P / arm rests (shown)

KSC060 - NEOLIVIANO

standard: frame: CAL / MF/ PC slats: HW / AAL / SC fixing: hidden pin fixing h: 450 / 780 w: 670 l: 600 / 1500 /1750 / 3000 / 4500 / 6000 options: 2P

KF238 - CORSO SEATING

standard: frame: CAL / MF / PC / polished arm rests slats: HW / SC fixing: bolt-down h: 450 / 815 w: 550 l: 1840 options: 2P

KF245- HERITAGE SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 395 / 775 w: 615 l: 1800 options: 2P

KF248 - ROTHERMAN SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 420 / 855 w: 680 l: 1905 options: 2P

KF255 - COUNCIL SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 430 / 800 w: 560 l: 1875 options: 2P / logo

KSC040 - MOON SEAT

standard: frame: HDG ST / HDG slats: HW / SC fixing: hidden pin fixing h: 400 / 760 w: 770 l: 1800 /3000 options: PC / 2P

KSC070 - NU SEAT

standard: frame: HDG ST / HDG slats: HW / SC fixing: boltdown h: 450 / 810 w: 660 l: 2580 3700 options: PC / 2P

KF240 - SOVEREIGN SEATING

standard: frame: CAL / MF / PC slats: HW /SC fixing: bolt-down h: 450 / 875 w: 620 l: 1860 options: 2P

KF246 - PREMIER SEATING

standard: frame: CAL / MF / PC slats: HW / SC fixing: bolt-down h: 440 / 800 w: 620 l: 1845 options: 2P

KF249 - CHAISE LOUNGE

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: bolt-down h: 1085 w: 600 l: 1470 options: 1200 double width / 2P

KF256 - PARK SEATING

standard: frame: HDG ST / HDG / PC slats: HW / SC fixing: bolt-down h: 430 / 930 w: 835 l: 1900 options: 2P

KSC050 - NEOROMANTICO

standard: frame: CAL / MF slats: HW / SC fixing: hidden pin fixing h: 450 / 770 w: 690 l: 600 /1750 / 3000 options: PC / 2P

Materials & Finishes We source our materials from quality suppliers who provide attention

to suit the Australian Market and have the ability to manufacture

to detail, repeatability and high scrutinisation of their products.

modified or custom products from their foundry based in

We then manufacture accordingly to achieve the industry’s highest

Shepparton, Victoria.

quality time after time as ensured by our ISO 9001 certification.

Landmark also carries a select range of designer furniture from

Our pine is environmentally-friendly plantation sourced and is

Spanish company Santa & Cole providing European excellence in

stabilised and treated with Light Organic Solvent Preservatives (LOSP)

design form and function.

to provide protection from insects and decay. It can be stained or painted to further enhance it’s life, durability and appeal. Our hardwood is select-grade and sustainably-harvested western

Landmark with the support of Furphy Foundry and Santa & Cole offer the largest range of standard street and park furniture and the ability to provide a wide range of solutions for individual requirements.

Queensland hardwood or similar stress grade F17 or better. It is treated with Ammoniacal Copper Quaternary (ACQ) for protection from insects and decay, which can be stained. We don’t recommend painting on hardwood because it releases natural tannins from the timber and diminishes the look of the finished paintwork. We can also use other types of timber species and finishes according to your requirements. Our steel is structural-grade and hot-dip galvanised as per

TIMBER PAINT COLOURS

PINE STAIN

AS/NZ 4680 for superior performance. It can then be powder coated to provide a hardwearing protective coating, which is attractive and comes in many colour options. For a higher level of corrosive protection from the elements, we recommend using two-pack epoxy paint or thermoplastic coatings over galvanised steel structures. Aluminium is also structural grade and usually chosen for its excellent anti-corrosive properties for those locations that are harshly

EPOXY / TWO PACK COLOURS HARDWOOD STAIN

affected by the environment, but due to the relatively limited strength (approximately 30% that of steel) there are some design issues that limit its use. Aluminium can be powder-coated or anodised providing an attractive finish that comes in many colours, both two pack paint and thermoplastic coatings can also be used to further enhance its natural anti-corrosive abilities. POWDER COAT OPTIONS

WPC COLOUR SELECTION

We use many other materials such as composites, plastics, stainless steel, concrete and other timber species for a variety of applications. Our exclusive partnerships enable us to offer an extensive range of street and park furniture. Choose from the full range of products and services from the iconic Australian manufacturer with over 150 years experience - Furphy Foundry. They have an extensive portfolio of urban designed furniture

ALUMINIUM ANODISED COLOURS

Custom

Street & Park Furniture

Landmarkâ&#x20AC;&#x2122;s comprehensive range of street and park furniture offers many standard designs, sizes and options that make it easy to refer to when planning for any community environment. However when your project demands a signature look we will work with you to design, engineer and manufacture a custom solution for your specific needs. With over 26 years of experience and an extensive range of standard furniture designs to start from we can effortlessly craft a custom design to suit site-specific or individual requirements. We draft, engineer, manufacture and install designs created by architects, landscape architects, engineers and anyone who wants a completely unique outcome. We incorporate anti-vandal, low maintenance and high public use design principles while considering cool, hot, dry, humid and corrosive conditions to help you engineer real life solutions. Our partnership with Furphy Foundry, a Victorian based manufacturer specialising in the design and manufacturing of street and park furniture, means we offer an extensive range and the ability to provide customised solutions for individual requirements. Material selection can vary as new trends and improved materials enter the market. We are happy to incorporate your preferred choices and share our experience of what has worked well in the past for a lasting community outcome, ultimately the final choice is always yours. We collaborate with and listen to our customers, so you get the very best results. We are proud to be associated with outstanding design and architecture, which we believe play a very important part in all our communities.

Custom

Street & Park Furniture

Communities that look good feel great.

WITH OFFICES ACROSS AUSTRALIA AND NEW ZEALAND WE’VE GOT YOU COVERED

brisbane

perth adelaide

sydney

auckland

melbourne

Web landmarkpro.com.au Email sales@landmarkpro.com.au Call 1300 768 230