exploded diagrams of cabinet construction

• Case (top, bottom, sides) – ⅝" PB or Plywood – Edgebanded face, doweled, glued and pressed, 36" maximum case width • Case Interior – white TFL faced • Top, bottom, sides – grooved to accept ¼" captive back • Captive Back – hot glued and stapled when cabinet is pressed • Nailers – doweled, glued, and pressed with cabinet behind captive back • Adjustable shelves – ⅝" white TFL faced, held in with seismically rated locking plastic clips. Drilled holes in case sides for shelf height adjustment (32mm O.C.) • Doors – 24" wide, 60” tall maximum warrantied size • Drawers – 24" maximum standard drawer width, 10" minimum. • Decorative Hardware – ships separately • KCMA sticker – placed in sink cabinets

concealed European six-way adjustable door hinge attaches to case

Adjustable folding leg levelers at all base corners ⅝" thick applied side toe kick on exposed ends

⅝" thick running toe kick added at installation for a seamless look

• Frames – ¾" kiln dried solid hardwood glued with pocket hole screws • Case (top, bottom, sides) – ⅝" PB or Plywood – dados – glued and mechanical fasteners to secure to face frame, 36" maximum case width • Case Interior – white TFL faced • Backs – ¼" unfinished backs stapled to top, bottom, and sides • Nailers – (⅝" x 1 ¼") both top and bottom backs, stapled to top, bottom, and sides • Adjustable shelves – ⅝" white

TFL faced, held in with seismically rated locking plastic clips. Drilled holes in case sides for shelf height adjustment (32mm O.C.) • Doors – 24" wide, 60" tall maximum warrantied size • Drawers – 24" maximum standard drawer width. • Decorative Hardware – ships separately • KCMA sticker – placed in sink cabinets

additional plastic corner supports at all top and base corners

concealed European six-way adjustable door hinge attaches to face frame dadoed joint

⅝" thick toe box ¼" thick running toe kick added at installation for a seamless look