NACE 2011 Training by LATINCORR

Training & Certification Guide

2011

The Worldâ&#x20AC;&#x2122;s Largest and Most Recognized Association for Corrosion Control Supplement to MP

Why Invest Your Time and Money in Training Now?

n 2002, the effects of corrosion cost the U.S. over $276 billion. Up to one-third of that cost is preventable with the application of technologies that are available to us today. Built upon decades of knowledge and expertise, NACE International courses and certifications are the most recognized and widely accepted corrosion training programs in the world. NACE courses provide the knowledge and skills to support infrastructure sustainability and asset preservation by training professionals to recognize, qualify, and quantify corrosion in a variety of application-oriented and industry-specific subjects. Whether you are working to improve your own career path, or establishing a practical training program for your department or company, NACE training and certification can help you obtain the skills to make better decisions on your corrosion related issues.

NACE International Training Center

ACE International is home to the first freestanding facility dedicated exclusively to advancing corrosion education. The 15,000-square-foot facility features classroom space and practical, hands-on tools such as a cathodic protection test field with buried, electrified pipelines where more than 46 CP-related tests can be performed; a coatings lab with a blast and spray booth; a virtual spray booth for classroom-based applicator training; an equipment preparation area; and industrial structures, such as the nationâ&#x20AC;&#x2122;s only marine ballast tank immersion tent. These tools enable students to experience conditions in realworld corrosive environments, and to prove their competencies in field situations.

NACE International has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102. In obtaining this approval, NACE International has demonstrated that it complies with the ANSI/IACET I-2001 Standard which is widely recognized as the Standard of good practice internationally. As a result of their Authorized Provider status, NACE International is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard. 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Table of Contents General Education

Basic Corrosion.................................................................................................................................................................................3 Basic Corrosion on CD.................................................................................................................................................................4 Coatings in Conjunction with Cathodic Protection..................................................................................................5 Corrosion Control in the Refining Industry.....................................................................................................................6 Designing for Corrosion Control...........................................................................................................................................7

Coatings Inspector Program (CIP)

CIP Level 1...........................................................................................................................................................................................9 CIP Level 2.........................................................................................................................................................................................11 CIP Level 2, Maritime Emphasis........................................................................................................................................... 13 CIP Level 3 Peer Review........................................................................................................................................................... 14 Nuclear Power Plant Training for Coatings Inspectors.......................................................................................... 15 CIP One Day Bridge Course................................................................................................................................................... 16

Coatings

Pipeline Coatings Applicator Training............................................................................................................................. 18 Protective Coating Specialist Training and Certification Program (PCS)................................................... 19 NCCER/NACE Industrial Coatings and Lining Application Specialist – Level 1......................................20 NCCER/NACE Industrial Coatings and Lining Application Specialist – Level 2...................................... 21

Cathodic Protection Program (CP)

CP 1 – Cathodic Protection Tester..................................................................................................................................... 24 CP 2 – Cathodic Protection Technician..........................................................................................................................26 CP 2 – Cathodic Protection Technician, Maritime...................................................................................................28 CP 3 – Cathodic Protection Technologist.....................................................................................................................30 CP 4 – Cathodic Protection Specialist............................................................................................................................. 32 CP Interference..............................................................................................................................................................................34

Corrosion Assessment Training Offshore Corrosion Assessment Training (O-CAT)..................................................................................................36 Shipboard Corrosion Assessment Training (S-CAT)................................................................................................ 37

Pipelines

NACE Operator Qualification Program (OQ)...............................................................................................................40 Internal Corrosion for Pipelines – Basic.......................................................................................................................... 42 Internal Corrosion for Pipelines – Advanced.............................................................................................................. 43 Pipeline Corrosion Assessment Field Techniques (P-CAFT)..............................................................................44 Pipeline Corrosion Integrity Management (PCIM).................................................................................................. 45 Direct Assessment.......................................................................................................................................................................46 In-Line Inspection.......................................................................................................................................................................46

Certification Certification Programs at a Glance...................................................................................................................................48 Renewing your Certification.................................................................................................................................................56 Frequently Asked Questions.................................................................................................................................................57

Administrative Information Administrative Information...................................................................................................................................................58 Course Registration Form....................................................................................................................................................... 59 Course Registration and Licensing Fees........................................................................................................................60

Course Schedule Course Schedule.......................................................................................................................................................................... 61

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

General Education

ACE offers a variety of learning opportunities that can lead to career advancement through enhancing your skills and knowledge related to on-the-job performance. These courses have been designed to train a wide range of students, including management, engineers, field personnel, and sales professionals, regardless of the individualâ&#x20AC;&#x2122;s experience level. Our courses have been developed and refined by subject matter experts with decades of knowledge and expertise. Courses vary in length from week-long intensive study to one-day specialty courses. For students that are new to the field of corrosion, the Basic Corrosion course provides a solid foundation toward a comprehensive career in corrosion. The course serves as an entry point to other NACE courses and certifications allowing the student a path for continued career-long professional development that can open the doors to more job opportunities and greater earnings potential.

2 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Basic Corrosion 5-Day Classroom Course

1st-4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to 2 p.m., unless otherwise noted

Parallel Path to Certification for

The Basic Corrosion course focuses on corrosion and the potential problems caused by corrosion. It covers a basic but thorough review of causes of corrosion and the methods by which corrosion is identified, monitored, and controlled. Active participation is encouraged through hands-on experiments and case studies, as well as an open discussion format.

n Corrosion Technician n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

Who Should Attend

Fees

Description

Anyone who needs the ability to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility. This includes: ■■ Anyone desiring a basic understanding of corrosion ■■ Technicians ■■ Salespersons ■■ Inspectors ■■ Managers ■■ Engineers

Prerequisites

Previous training in corrosion control is not required to take this course. However, a basic understanding of science and chemistry is recommended to gain the most value from this course.

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■

Basics of Electrochemistry Types of Environments Where Corrosion Occurs Engineering Materials Forms of Corrosion Corrosion Control & Prevention Methods Testing & Monitoring Techniques

Advance Registration Member—$975 Nonmember—$1,175 Standard Registration Member—$1,150 Nonmember—$1,325 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Materials Included with Course Registration Fees

Students receive the following materials on-site: n Forms of Corrosion— Recognition and Prevention: NACE Handbook 1, Volume 1 n Corrosion and its Control: An Introduction to the Subject, Second Edition

3.6 CEUs

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Basic Corrosion Course on CD Fees Single User License Member—$925 Nonmember—$1,100 5-User License Member—$2,925 Nonmember—$3,435

Reference Materials Included with CD Purchase

The following materials are included with the Basic Corrosion CD: n Instruction booklet n Student study manual n Forms of Corrosion— Recognition and Prevention: NACE Handbook 1, Volume 1 n Corrosion and its Control: An Introduction to the Subject, Second Edition.

4 2011 Training & Certification Guide

A Self-Paced, Home-Study Format Description

The Basic Corrosion course on CD contains the same technical content as the classroom course and is presented in a user-friendly, self-study format. To successfully complete the selfstudy version of Basic Corrosion, you must pass a written examination within six months of receiving the CD. The exam is a proctored test that must be taken in person with a NACE-approved proctor. To meet this requirement, NACE has provided three easy options from which to choose. Option 1: Take the exam in your geographic area under the supervision of an approved NACE proctor. Option 2: Take the exam at NACE Headquarters in Houston, Texas. Option 3: Take the exam at any scheduled class on the final day of the course. (Go to www.nace.org for an updated course schedule) Please make arrangements in advance to take the exam through NACE on your desired test date. Once you have passed the exam, you will receive your certificate of course completion by mail.

System Requirements for CD ■■ ■■ ■■ ■■

Operating System: Windows Operating System required Processor: Pentium (or equivalent) with 12 MB of RAM Memory: 300 MB hard disk space (80 MB for minimum installation) Hardware: CD-ROM drive, video card, Super VGA monitor

For an updated schedule of courses, visit www.nace.org

Coatings in Conjunction with Cathodic Protection 6-Day Classroom Course

Parallel Path to Certification for

1st day: 1 p.m. to 5:30 p.m. • 2nd–5th days: 8 a.m. to 5 p.m. 6th day: 8 a.m. to noon, unless otherwise noted

Description

This course focuses on the control of metallic corrosion by applying coatings and cathodic protection, with coatings as the primary method of corrosion control supplemented by cathodic protection. The course is designed for corrosion control personnel who handle the selection and application of protective coatings that will be exposed cathodic protection. At the conclusion of the course, students take a 5-hour written examination.

Who Should Attend

This course is for individuals who use protective coatings for corrosion control, and who observe, record, or measure the effectiveness of cathodic protection systems.

Prerequisites

Attendees must have Cathodic Protection Tester Certification or equivalent training.

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Basic Corrosion Theory and CP Fundamentals Structures Protected by Coatings and Cathodic Protection Cathodic Protection and its Relationship to Coatings Surface Preparation and Coating Application Types of Coatings Used with Cathodic Protection Synergistic Effects between Coatings and Cathodic Protection Coating Performance Testing Excavation Examination Evaluating Corrosion

n Senior Corrosion Technologist See page 55 for details.

Fees Advance Registration Member—$1,495 Nonmember—$1,670 Standard Registration Member—$1,645 Nonmember—$1,820 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees

Students receive the Coatings in Conjunction with Cathodic Protection Course Manual on CD prior to the start of course. A printed course manual and Corrosion Prevention by Protective Coatings, Second Edition by C.G. Munger, revised by L.D. Vincent are provided to students on-site.

4.8 CEUs

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Corrosion Control in the Refining Industry Fees Advance Registration Member—$1,710 Nonmember—$1,885 Standard Registration Member—$1,860 Nonmember—$2,035 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Materials Included with Course Registration Fees

Students receive the following materials onsite: n REFIN•COR software

5-Day Classroom Course

1st-4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to noon, unless otherwise noted

Description

The Corrosion Control in the Refining Industry course provides an overview of refinery process units and specific process descriptions. It also focuses on the examination and identification of metallurgical problems that occur in process units. Students receive REFIN•COR software, which is a database of experiences, problems, and solutions encountered by refining industry corrosion engineers and includes minutes from the NACE Committee TEG 205X (formerly T-8) meetings on Refining Industry Corrosion from 1957 through 2008. This valuable information can be used on-the-job and cannot be found anywhere else.

Who Should Attend

This course is geared toward those with a minimum of 1-2 years experience in refineries including: design engineers, process engineers, procurement agents, maintenance planners, service company representatives who support refineries, corrosion and equipment engineers, metallurgists, inspectors, and inspection supervisors.

Prerequisites

No prior training is required.

Course Highlights (including but not limited to)

Refinery Corrosion Materials of Construction for Refinery Applications Refinery Operations and Its Interactions with Corrosion Refinery Units/Processes—Corrosion and Other Failures, Crude Distillation/Desalting, Fluid Catalytic Cracking Unit, Cracked Light Ends Recovery Units, Hydrofluoric Acid Alkylation Units, Sulfuric Acid Alkylation Units, Hydroprocessing Units, Catalytic Reforming, Delayed Coking Units, Amine Units, and Sulfur Recovery Units ■■ Corrosion Monitoring Methods in Refineries

■■ ■■ ■■ ■■

6 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Designing for Corrosion Control 5-Day Classroom Course

Parallel Path to Certification for

1st-4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to noon, unless otherwise noted

Description

The Designing for Corrosion Control course reviews the principles of corrosion and corrosion control and provides a systematic method for applying the technology of corrosion prevention to the design process. It offers an overview of the steps involved in materials selection common to many industries. It also covers corrosion control in system design and the financial principles used in evaluating alternative materials and designs.

Who Should Attend

Anyone who has a technical corrosion background but is new to design including: civil engineers, mechanical engineers, design and process engineers, consultants, contractors, and architects.

n Senior Corrosion Technologist See page 55 for details.

Fees Advance Registration Member—$975 Nonmember—$1,175 Standard Registration Member—$1,150 Nonmember—$1,325

No prior training is required. However, for those with a limited corrosion background, the NACE Basic Corrosion course is recommended prior to taking this course.

(Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Course Highlights (including but not limited to)

3.6 CEUs

Prerequisites

Corrosion Control and Its Importance in the Design Process Matching Materials Performance to Service Environments Materials Selection (Process, Methodologies, and Factors Influencing Materials Selection) ■■ Effects of Corrosion and Design on Materials ■■ Optimization of Design ■■ Economic Considerations and Analysis ■■ ■■ ■■

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Coating Inspector Program (CIP)

INTERNATIONAL

ince 1983, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. CIP introduces inspectors, applicators, blasters, manufacturers, owner’s representatives, specifiers, and technical salesmen to the basics of corrosion control, paint inspection, and project management in a way that has resulted in savings of billions of dollars in costly mistakes.

CIP Certification Once individuals successfully complete the corresponding course and exam, or pass the Peer Review, they are eligible for the related certifications, listed below. Each certification level allows them to perform different tasks in the field.

NACE Coating Inspector Level 1—Certified

With this level of certification, a person is qualified to undertake basic coating inspection of structural steel using nondestructive techniques and instrumentation under the supervision of a NACE Certified Coating Inspector-Level 3. The person certified at this level has basic knowledge of coating materials and techniques for surface preparation and application on steel substrates.

NACE Coating Inspector Level 2—Certified

With this level of certification, a person is qualified to perform advanced coating inspections using both nondestructive and destructive techniques and instrumentation. The person certified at this level has sufficient knowledge of specialized coating materials and techniques for the surface preparation and application used on a wide variety of substrates. He/she also has ample knowledge in advanced report writing, condition surveys, failure analysis, and refurbishment.

NACE Certified Coating Inspector—Level 3

With this level of certification, a person has demonstrated experience in practical environments to a panel of peers when faced with coatings related scenarios. This individual possesses the knowledge and can perform the tasks of individuals certified at Levels 1 and 2. Furthermore, this certification qualifies a person to supervise individuals who are NACE Coating Inspector Level 1-Certified and NACE Coating Inspector Level 2-Certified.

8 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP Level 1 6-Day Classroom Course

Parallel Path to Certification for

1st day: 10 a.m. to 7:30 p.m. • 2nd – 5th days: 8 a.m. to 7:30 p.m. 6th day: 8 a.m. to 5 p.m., unless otherwise noted

Description

CIP Level 1 presents the basic technology of coating application and inspection that offers more than 60 hours of instruction and practice. This course provides both technical and practical fundamentals for coating inspection work on structural steel projects. The course concludes with both written and practical exams.

Who Should Attend

Although specifically designed for coating inspector trainees, this course benefits anyone interested in gaining a better understanding of coatings application and inspection including project engineers, quality assurance managers, contractors, technical sales representatives, blasters, paint applicators, and maintenance personnel.

Fees Advance Registration Member—$1,685 Nonmember—$1,860 Standard Registration Member—$1,835 Nonmember—$1,995 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Prerequisites

There are no prerequisites for this course.

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details..

Reference Material Included with Course Registration Fees

Curing Mechanisms Role of the Inspector Test Instruments Inspection Procedures Coating Specifications Surface Preparation and Standards Application Procedures Coating Failures Field Lab Pre-job Conference MSDS and Product Data Sheet Review Logbook Documentation Team Exercises Case Studies

Students receive the CIP Level 1 Course Manual on CD prior to the start of course. A printed course manual is provided to students on-site.

5.6 CEUs

Recognition

Upon successful completion of CIP Level 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP Exam Course 1 (with purchase of CIP DVD Set 1) Fees Advance Registration Member—$1,335 Nonmember—$1,470 Standard Registration Member—$1,485 Nonmember—$1,605 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

CIP DVD Set 1 Member—$390 Nonmember—$450

Reference Material Included with Course Registration Fees

Students receive the CIP Level 1 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site

5.6 CEUs

3-Day Classroom Course

1st – 2nd days: 8 a.m. to 7:30 p.m. 3rd day: 8 a.m. to 5 p.m., unless otherwise noted

Description

This option completes CIP Level 1 training contained in the CIP DVD Set 1 (prior purchase of DVD required.) This three-day short course includes a practical lab at an offsite coatings facility, hands-on training necessary to perform coating inspection work, and team exercises. It concludes with both written and practical exams.

Who Should Attend

CIP Exam Course 1 and the CIP DVD Set 1 is designed for coating inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, contractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program.

Prerequisites

No prior training is required; however, prior licensing of CIP DVD Set 1 is required to register for this course. In addition, NACE recommends that all five assessments contained in the DVD set be completed with a grade of 80% or higher before registering for this course.

Course Highlights (including but not limited to) n Surface Preparation n Coatings Application n Coatings Technology n Health and Safety n Inspection Recognition

Upon successful completion of CIP Exam Course 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.

CIP DVD Set 1 Description

CIP DVD Set 1 presents the technical content from NACE Coating Inspector Program Session I in an easy-to-use, self-study format. Set 1 presents CIP course material using substantial video footage with corresponding audio and text and includes interactive quizzes and module tests. Students can learn at their own pace while at home, in the office, or traveling.

System Requirements n n n n n

Operating system: Windows XP/2000 Processor: Pentium 4, Speed: 200Mhz Graphics: 65,000 colors at 800 by 600 resolution DVD Drive Sound Card: Windows Compatible

Member Price—$390, Non-Member Price—$450 NACE would like to thank International Paint for its generous contribution toward the development of the NACE CIP in a self-study format.

10 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP Level 2 6-Day Classroom Course

Parallel Path to Certification for

1st day: 10 a.m. to 7:30 p.m. • 2nd – 5th days: 8 a.m. to 7:30 p.m. 6th day: 8 a.m. to 5 p.m., unless otherwise noted

Description

CIP Level 2 focuses on advanced inspection techniques and specialized application for both steel and non-steel substrates. The course explains in-depth coverage of surface preparation, coating types, inspection criteria, and failure modes for various coatings including specialized coatings and linings. The course concludes with both written and practical exams.

Who Should Attend

Anyone interested in becoming NACE Coating Inspector Level 2-Certified or increasing his or her coating inspection knowledge should attend this course.

Prerequisites

Successful completion of CIP Level 1 classroom training or CIP Exam Course 1 is required to register for CIP Level 2.

Course Highlights (including but not limited to) n Dehumidification n Centrifugal Blast Cleaning n Waterjetting n Coating Types and Inspection Criteria n Hot-Dip Galvanizing n Spray Metalizing n Concrete and Cementitious Surfaces n Pipeline Coatings n Specialized Application Equipment n Use of Inspection Procedures for Both Destructive and Nondestructive Test Instruments n Inspection Instruments Lab n Laboratory Instruments and Test Methods n Coating Survey Techniques n Cathodic Protection n Team Exercises/Case Studies Recognition

Upon successful completion of CIP Level 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.

2011 Training & Certification Guide

n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

Reference Material Included with Course Registration Fees

Students receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site.

5.6 CEUs

For an updated schedule of courses, visit www.nace.org

CIP Exam Course 2 (with purchase of CIP DVD Set 2) Fees Advance Registration Member—$1,335 Nonmember—$1,470 Standard Registration Member—$1,485 Nonmember—$1,605 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

CIP DVD Set 2 Member—$390 Nonmember—$450

Reference Material Included with Course Registration Fees

5.6 CEUs

3-Day Classroom Course

1st–2nd days: 8 a.m. to 7:30 p.m. 3rd day: 8 a.m. to 5 p.m., unless otherwise noted

Description

This option completes the Level 2 training contained in the CIP DVD Set 2 (prior purchase of DVD required.) This three-day short course includes hands-on training necessary to perform coating inspection work, team exercises, and both written and practical exams.

Who Should Attend

CIP DVD Set 2 is designed for coating inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, contractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program.

Prerequisites

Successful completion of CIP Level 1 classroom training or CIP Exam Course 1 is required to register for this course. NACE recommends that all material contained in the DVD be studied prior to course attendance

Course Highlights (including but not limited to) n Advanced Inspection Techniques and Specialized Application for Both Steel and Non-Steel Substrates n Surface Preparation n Coating Types n Inspection Criteria n Failure Modes Recognition

Upon successful completion of CIP Exam Course 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.

CIP DVD Set 2 Description

CIP Level 2 DVD contains the same technical content presented in the CIP Level 2 classroom course. Set 2 presents CIP course material using substantial video footage with corresponding audio and text and includes interactive quizzes and module tests. Students can learn at their own pace while at home, in the office, or traveling. Five, ten, fifteen, and twenty user license fees are also available.

System Requirements n n n n n

Operating system: Windows XP/2000 Processor: Pentium 4, Speed: 200Mhz Graphics: 65,000 colors at 800 by 600 resolution DVD Drive Sound Card: Windows Compatible

Member Price—$390, Non-Member Price—$450 NACE would like to thank International Paint for its generous contribution toward the development of the NACE CIP in a self-study format.

12 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP Level 2, Maritime Emphasis 6-Day Classroom Course

Parallel Path to Certification for

1st day: 10 a.m. to 7:30 p.m. • 2nd – 5th days: 8 a.m. to 7:30 p.m. 6th day: 8 a.m. to 5 p.m., unless otherwise noted

Description

CIP Level 2, Maritime Emphasis includes topics from CIP Level 1 and CIP Level 2, with a focus on coating inspection in the maritime industry. The course provides in-depth coverage of surface preparation, coating types, inspection criteria, failure modes, and case studies from the maritime industry. CIP Level 2, maritime emphasis highlights the skills and knowledge required to correctly address the inspection requirements of the International Maritime Organization’s (IMO) Performance Standard for Protective Coatings (PSPC). The course concludes with both written and practical exams.

Who Should Attend ■■ ■■ ■■ ■■ ■■ ■■ ■■

Advance Registration Member—$1,685 Nonmember—$1,860

(Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees

Successfully complete NACE CIP Level 1 course

Course Highlights (included but not limited to)

In-depth knowledge of the differing interpretations of MSC.215 (85) IMO PSPC Coating regulations Coating types Coating maintenance and inspection Ballast tank inspection Introduction to the roles of classification societies Governance within the maritime industry Training on proper use of digital dry film thickness (DFT) instrumentation Surface preparation Coating applications Inspection criteria Failure modes Case studies from the maritime industry

Recognition

Fees

Standard Registration Member—$1,835 Nonmember—$1,995

Quality control and coating inspectors in the maritime industry Coating applicators Asset maintenance managers in shipyards Ship classification society employees Coating contractors Ship owners Flag administration surveyors

Prerequisites

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

5.6 CEUs

Upon successful completion of CIP Level 2, Maritime Emphasis, a person will be recognized as NACE Coating Inspector Level 2—Marine Certified.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP Level 3 Peer Review Fees Advance Registration Member—$875 Nonmember—$1,050 Standard Registration Member—$1,060 Nonmember—$1,245 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

2-Hour Oral Examination Description

The CIP Peer Review is a detailed oral examination in front of a three-member review board that lasts approximately 2 hours and is graded on a pass/fail basis. The exam includes a series of questions that test the candidate’s practical and theoretical knowledge of coatings and coating inspection. Candidates are questioned from a random draw of topics ranging from standards, procedures, ethics, coatings use, inspection instruments, role-playing, and specific case questions.

Who Should Attend

Anyone interested in completing his or her CIP training to receive recognition as a NACE Certified Coating Inspector-Level 3.

Prerequisites

Students who have successfully completed CIP Level 1 and CIP Level 2 and have two years of verifiable coatings-related work experience may register for the CIP Level 3 Peer Review. Work experience documentation forms must be submitted to NACE headquarters at least 60 days prior to the start date. These forms are located in the CIP Student Manuals or may be downloaded from the NACE Web site at www.nace.org. Submit your completed applications via fax to the number on the forms, +1 281-228-6344, or e-mail the signed forms to carol.steele@nace.org.

Recognition

Upon successful completion of CIP Level 3 Peer Review, a person is recognized as a NACE Certified Coating Inspector-Level 3.

14 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Nuclear Power Plant Training for Coating Inspectors 5-Day Classroom Course

Fees

1st – 4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to noon, unless otherwise noted

Advance Registration Member—$1,575 Nonmember—$1,995

Description

This course prepares qualified coating inspectors to conduct inspections in nuclear power plants (NPPs). The training focuses on the unique challenges presented by the restrictive and safety-critical environment, plus the verbatim compliance demanded in NPPs, as well as plant and industry regulations, technical specifications, and procedures.

Who Should Attend

■■ NPP quality assurance managers ■■ Qualified coating inspectors who want to perform inspections in nuclear power plant facilities ■■ Inspection firms – qualified inspectors and managers ■■ Coating manufacturers sales and technical representatives ■■ Coating inspection and evaluation personnel at architectural engineering firms ■■ Coating contractors ■■ Coating evaluation personnel from the Nuclear Regulatory Commission (U.S.) ■■ Paint supervisors at nuclear power plants, who need to understand what coating inspectors look for

Prerequisites

(Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees

ASTM Standards ASTM 2009 Annual Book of Standards, Vols. 06.01 and 06.02; D 5144-08; C177-04; D 92-05a; E 1461-07; E 1530-06; E 33702 (07); and E 94-09 ANSI Standards N 101.2-1972; N 101.4-1972; N 5.12-1974; N 45.2.6-1978

No prior training is required, but CIP Level 1 certification is recommended. To receive course certification, CIP Level 1 certification is required.

Course Highlights (including but not limited to)

Standard Registration Member—$1,725 Nonmember—$2,145

■■ Learn how to perform coating inspections in ultra-restrictive environments, both internationally and domestically ■■ Verbatim compliance with complete introduction to plant and industry regulations, work procedures, and industry terms ■■ Introduction to 20+ ASTM and ANSI standards for the nuclear industry ■■ Safety-critical nature of coatings and its effect on NPP operations ■■ Coating condition assessments of NPPs ■■ Technical specifications, including the unique requirements of coating systems for NPPs ■■ Unique duties involved with working in a NPP

4.0 CEUs

Recognition

NACE Coating Inspector -Nuclear Facilities Certification Supplement (NFCS)

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CIP One Day Bridge Course Fees Advance Registration Member—$310 Nonmember—$435 Standard Registration Member—$385 Nonmember—$475 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

0.8 CEUs

One Day Classroom Course

8 a.m. to 5 p.m., unless otherwise noted

Description

The CIP One Day Bridge Course provides participants in CIP with specific training related to coating inspection of bridges. The course focuses on coating application of bridges and the role of the bridge coating inspector in the quality control process, and guides the inspector through a detailed project, from start to finish. Students take a 1-hour written examination at the conclusion of the course. To better meet the training requirements of bridge coating inspectors for state and provincial Departments of Transportation (DOT), the course was revised with the assistance of representatives from various DOTs, including New Jersey, Florida, Georgia, Massachusetts, Texas, Louisiana, and Nova Scotia, as well as the Triborough Bridge and Tunnel Authority.

Who Should Attend ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

CIP participants seeking to expand their knowledge of bridge coating application and inspection Quality Assurance and Control Inspectors and Contractors DOT Bridge Engineers Asset Maintenance Managers Coatings Contractors Inspection Companies Surface Preparers Applicators

Prerequisites

Successful completion of CIP Level 1 is required to register for this course.

Course Highlights (including but not limited to) n Nomenclature n Environmental Health and Safety n Surface Preparation n Coatings n Sample Specification Recognition

Participants who successfully complete this course receive a bridge stamp on their CIP cards.

16 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Coatings

f the technologies used to control corrosion, protective coatings is one of the most significant. They are used to provide protection for most materials and surface types in most environments. Approximately 90% of all expenditures associated with corrosion control are related to protective coatings. A properly selected and applied coating system can increase the usable lifetime of a material while reducing replacement and maintenance costs. NACE International provides the means of technical proficiency for the coatings industry through training courses specifically developed for coatings application. The NACE/NCCER Industrial Coatings and Lining Application courses and the NACE PCS Training Program are among the specialized training geared towards individuals with various levels of coating experience, from applicators and contractors to engineers and project owners.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Pipeline Coating Applicator Training Coming Soon, Summer 2011 5-Day Classroom Course 1st - 4th day: Classroom Instruction with Chapter exams, and Hands-on Field Assessment Demonstrations and Practice 5th day: Graded Field Performance Assessments

Description

The NACE Pipeline Coating Applicator Training course provides in-depth instruction to the pipeline coating applicator in the areas of general pipeline component parts and their construction, typical shop applied coatings, common preheating methods and application, proper application of materials for field joints, pipeline coating quality control, mainline coating repair application, and professional considerations for an industrial coating applicator.

Who Should Attend

■■ Pipeline Coating Applicator Professionals ■■ Industrial Coating Professionals who seek a career in pipeline coating application

Prerequisites

The following prerequisites are highly recommended, but not required: ■■ High school diploma or GED ■■ Ability to perform basic math calculations (simple algebra, fractions, and conversions) ■■ Ability to lift 40 pounds

Topics covered

■■ Introduction to Pipelines—Their Component Parts, Pipeline Types, General Pipeline Construction Methods ■■ Pipeline Corrosion and Consequences of Failure ■■ Mainline (shop applied) Coating Types and Applications ■■ Field Joint Coating Types and Application ■■ Pre-Job Requirements ■■ Surface Preparation ■■ Preheating ■■ Quality Control ■■ Field Joint Coating Types ■■ Application of Cold Applied Tapes ■■ Application of Hot Tapes ■■ Application of Petrolatum and Wax Tapes ■■ Application of 2 and 3 layer Sleeves ■■ Application of Liquid Epoxy ■■ Pre-Insulated Pipe Coatings ■■ Mainline Coating Repair General ■■ Mainline Coating Repair, FBE Specific ■■ Environmental and Professional Considerations

18 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Protective Coating Specialist Program (PCS) Coming Soon, Spring 2011 NACE International introduces the PCS Training Program for professionals in the protective coatings industry. The program consists of three different courses tailored for individuals of all levels of experience in protective coatings and linings â&#x20AC;&#x201C; from the beginner to those looking to expand their roles into management or achieve NACE PCS certification. The courses can be taken in succession; however individuals with more experience can choose which course(s) would most benefit them in their career in protective coatings.

PCS 1 Basic Principles

PCS 1 provides introductory level information regarding coatings and linings used to control corrosion and focuses on when, where, and how they should be used. This course is geared for specifiers, maintenance, planning, engineering, and supervisory personnel who are responsible for coatings and linings, and are new to the field or position. No prior training is required before enrollment in this course.

PCS 2 Advanced

PCS 2 provides in-depth understanding of coatings chemistry and unique characteristics for application, surface preparation, and inspection; including writing specifications and planning maintenance. This course is suitable for planning, engineering, supervisory, or technical personnel who work with protective coatings on a regular basis. No prior training is required before enrollment in this course, although completion of PCS 1 is strongly recommended.

PCS 3 Management

PCS 3 teaches full-scope project management including project design, specification, estimation, and maintenance planning. This course is directed at planning, engineering, or supervisory level personnel who have responsibility for industrial protective coatings and linings. Completion of PCS 2 is strongly recommended before in enrollment in this course. Please check the Web site for upcoming dates & locations.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Industrial Coatings and Lining Application Specialist – Level 1 NACE International and NCCER (National Center for Construction Education and Research), two leading providers of industry education and training, have partnered to offer the first, most indepth coating and lining applicator training and certification for industrial painters.

NCCER/NACE International Coating Applicator Training and Certification Program Description

This multi-level progressive program establishes a foundation of industrial coatings knowledge and globally serves the workforce of paint applicators employed to prevent corrosion of industrial structures. The program: ■■ Meets the ANSI/NACE/SSPC Standard Practice (ANSI/NACE No. 13/SSPC ACS-1): Industrial Coating and Lining Application Specialist Qualification and Certification ■■ Provides 450 hours of training for Level 1 and 2 qualification, meeting the U.S. Department of Labor’s Office of Apprenticeship requirements for time-based training ■■ The Level 1program is comprised of 7 modules: □□ Basic Safety □□ Basic Rigging □□ Introduction to Coating Trade □□ Surface Preparation □□ Industrial Coating □□ Coating Application □□ Health & Safety, Debris Management, Containment, and Ventilation ■■ Uses both Imperial and Metric units throughout, designed for the International Market ■■ Provides a clear and upward career path for the industrial painter who can proceed toward certification as a NACE Coating Inspector and then Protective Coating Specialist, or proceed to other craft training through NCCER.

Who Should Attend

Painters looking to enhance his/her skills, prove his/her credentials, and earn skills recognition that are portable; contractors who will benefit from professionally trained industrial painters; project owners who will benefit from specifying “a known quantity” by asking for professionally trained painters meeting NACE Standard No. 13.

Recognition

Candidates can achieve three levels of recognition in the program – Qualified, Certified or Certified Plus. How to obtain training: 1. Purchase the student training guide at NACE.org or at NCCER.org 2. If a student wants a training course, he/she must find an NCCER-Accredited Training Sponsor through NCCER.org to train with an NCCER Certified instructor. 3. The student must take written assessments and performance assessments through an NCCER Accredited Assessment Center. 4. Once the student successfully passes each level of written and performance assessments, he/she will be qualified to NACE No. 13 Standard Practice and credentialed through NACE-NCCER as Certified or Certified Plus. 5. That qualification provides the student with: a. Easy-to-carry, industry-recognized credentials b. Entry into a national database of coating professionals through NACE and NCCER 6. Each level of training is equivalent to 1 year; candidates may “test out” at any level by successfully completing the written and performance assessments.

20 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Industrial Coatings and Lining Application Specialist – Level 2 NCCER/NACE International Coating Applicator Training and Certification Program Description

This multi-level progressive program establishes a foundation of industrial coatings knowledge and globally serves the workforce of paint applicators employed to prevent corrosion of industrial structures. The program: ■■ Meets the ANSI/NACE/SSPC Standard Practice (ANSI/NACE No. 13/SSPC ACS-1): Industrial Coating and Lining Application Specialist Qualification and Certification ■■ Provides 450 hours of training for Level 1 and 2 qualification, meeting the U.S. Department of Labor’s Office of Apprenticeship requirements for time-based training ■■ The Level 2 program is comprised of 7 modules: □□ Industrial Coating Safety □□ Corrosion Protection □□ Work Planning and Quality Control □□ Containment □□ Surface Preparation Two □□ Industrial Coatings Two □□ Coatings Application Two ■■ Uses both Imperial and Metric units throughout, designed for the International Market ■■ Provides a clear and upward career path for the industrial painter who can proceed toward certification as a NACE Coating Inspector and then Protective Coating Specialist, or proceed to other craft training through NCCER.

Who Should Attend

Recognition

Candidates can achieve three levels of recognition in the program – Qualified, Certified or Certified Plus. How to obtain training: 1. Purchase the student training guide at NACE.org or at NCCER.org 2. If a student wants a training course, he/she must find an NCCER-Accredited Training Sponsor through NCCER.org to train with an NCCER Certified instructor. 3. The student must take written assessments and performance assessments through an NCCER Accredited Assessment Center. 4. Once the student successfully passes each level of written and performance assessments, he/she will be qualified to NACE No. 13 Standard Practice and credentialed through NACE-NCCER as Certified or Certified Plus. 5. That qualification provides the student with: c. Easy-to-carry, industry-recognized credentials d. Entry into a national database of coating professionals through NACE and NCCER 6. Each level of training is equivalent to 1 year; candidates may “test out” at any level by successfully completing the written and performance assessments.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Do I apply Cathodic Protection or Coatings to protect my assets?

How about

Both!

The Coatings in Conjunction with Cathodic Protection (CCCP) course emphasizes the relationship between these two methods of corrosion control and how they interact. CCCP provides students with the knowledge and skills to implement and monitor a corrosion control program that utilizes both methods.

For more details about this course, see page 5. 22 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Cathodic Protection

he NACE Cathodic Protection Training and Certification Program (CP) is comprised of 6 courses that are designed to train a wide range of students depending on the individualâ&#x20AC;&#x2122;s experience level. Each CP course is an independent component of the program and has a different skill and education level for entry, taking into account the studentâ&#x20AC;&#x2122;s work experience and math/science background.

INTERNATIONAL

TRAINING & CERTIFICATION

The program includes four certification courses and moves from entry level (CP 1) to the most knowledgeable and experienced specialist level (CP 4). The CP program also offers specialized courses in CP Interference and Coatings in Conjunction with Cathodic Protection, both of which are essential factors for the successful application and execution of cathodic protection. Whether you want to improve your career path through CP certification or enhance your skills and knowledge related to on-the-job performance through CP training, NACE CP courses ensure the in-depth understanding of cathodic protection that is critical to extending the operating life and integrity of your assets.

2011 Training & Certification Guide 2010

For an updated schedule of courses, visit www.nace.org

CP 1—Cathodic Protection Tester Parallel Path to Certification for n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

Reference Materials Included with Course Registration Fees

Students receive the CP 1–Cathodic Protection Tester Course Manual on CD prior to the start of the course. A printed course manual, as well as Peabody’s Control of Pipeline Corrosion, is provided to students on-site.

5.0 CEUs

6-Day Classroom Course

1st day: 1 p.m. to 6:30 p.m. • 2nd - 5th days: 8 a.m. to 6:30 p.m. 6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted

Description

The CP 1–Cathodic Protection Tester course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Tester Certification examination. This course provides theoretical knowledge and practical fundamentals for testing on both galvanic and impressed current CP systems. Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equipment and instruments for CP testing. The course concludes with a 2.5-hour written and a 2-hour practical exam.

Who Should Attend

This program benefits anyone responsible for supervising CP systems, measuring the effectiveness of CP systems, and/or recording this data, including CP field personnel and technicians. Individuals pursuing certification as a NACE Cathodic Protection Tester should also attend.

Prerequisites

The following prerequisites are highly recommended, but not required:

■■ High school diploma or GED ■■ Six months of CP work experience ■■ Ability to perform basic math calculations (simple algebra, fractions, and conversions)

What You Need to Know to Succeed in This Course

Students with little CP experience may be successful in this course if they can grasp scientific concepts, can perform math calculations, and possess an understanding of electrical measurements. Ideally, students should have six months of solid work experience in handling CP instruments under the supervision of an experienced CP Tester or Technician. They should also be comfortable with math concepts that include subtraction, division, fractions, algebra, balancing equations, conversions of units, percentages, and graphs. An understanding of Ohm’s Law applied to series and parallel circuits is also an advantage. NACE recommends that students without this knowledge should take the NACE CP Tutorials. If you are not sure you possess the basic knowledge to pass CP 1, you may walk through the short primer on Ohm’s Law and basic math assessment online.

■■ Ohm’s Law (www.nace.org) ■■ Math Assessment (www.nace.org)

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

24 2011 Training & Certification Guide

Basic Electricity Basic Chemistry and Corrosion Fundamentals CP Fundamentals Field Measurements Stray Current Identification Installing CP Components Monitoring CP Systems Recordkeeping Safety Specific to CP Troubleshooting

For an updated schedule of courses, visit www.nace.org

CP 1—Cathodic Protection Tester Skill Assessment

To receive the Cathodic Protection Tester certification, a student must pass an open book, written exam and a closed book, practical exam each with a 70% or greater. Upon successful completion of the examination, a Certified NACE Cathodic Protection Tester will possess the following skills and knowledge factors: ■■ Understand the basics of electricity, electrical laws, electrochemistry, corrosion, and CP theory ■■ An understanding of polarity related to current flow and metal corrosion activity ■■ Conduct tests to identify shorts and continuity tests in CP systems ■■ Use test instruments to perform a variety of field tests such as structure-to-soil potentials, voltage and current measurements, soil resistivity, pipe/cable locating, and rectifier readings ■■ Understand CP components including impressed current systems, galvanic anodes and test stations ■■ Read shunts and understand their use in rectifiers, bonds, and anodes ■■ Perform periodic surveys to confirm the effectiveness of a CP system ■■ Gain knowledge of reference cells, their maintenance, use, and precautions ■■ Learn basic location mapping, report preparation, and recordkeeping ■■ Review safety issues specific to CP ■■ Understanding of code requirements related to CP

CP 1—Cathodic Protection Tester Exam Only 4.5-Hour Examination

Fees

Description

Students seeking CP Tester certification and do not take the CP 1-Cathodic Protection Tester course may earn certification through an Exam Only option. This option consists of a 2.5hour written examination and a 2-hour hands-on, practical examination, which are the same exams offered in the CP 1 course. Exam Only candidates receive a CP 1–Cathodic Protection Tester Course Manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 1–Cathodic Protection Tester course offerings.

Member—$655 Nonmember—$805

Prerequisites

The following prerequisites are highly recommended, but not required: ■■ High school diploma or GED ■■ Six months of CP work experience ■■ Ability to perform basic math calculations (simple algebra, fractions, and conversions)

Exam Only Option

Candidates may sit for the CP Tester examination without taking the class. The written exam is open book so that candidates can bring their own references; however, the practical exam is closed book. Exam Only candidates may only attend the course on the day of the exam. Contact NACE FirstService for more information by phone: +1 281-228-6223, or e-mail: FirstService@nace.org. Registration fees for exam only candidates are nonrefundable.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 2—Cathodic Protection Technician Parallel Path to Certification for n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

6-Day Classroom Course

1st day: 1 p.m. to 6:30 p.m. • 2nd–5th days: 8 a.m. to 6:30 p.m. 6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted

Description

The CP 2–Cathodic Protection Technician course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Technician Certification examination. Course topics include intermediate-level discussions of corrosion theory and CP concepts, types of CP systems, AC and DC stray current interference, and advanced field measurement techniques. This course provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current CP systems and to gather design data. Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equipment and instruments for CP testing. The course concludes with a 2.5-hour written and a 2-hour practical exam.

Who Should Attend

This course is designed for individuals with a working knowledge of CP or possess extensive years of CP field experience with a technical background. Students should complete a preliminary application for certification at least 60 days in advance so that prerequisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balancing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1-Cathodic Protection Tester course, or equivalent; and comprehensive knowledge of electrochemistry, electricity, electrical laws, series and parallel circuits, meter operation, and CP fundamentals.

Prerequisites

For each path, all prerequisites must be met in order to apply for the CP 2–Cathodic Protection Technician course. Path 1

Path 2

Path 3

1 year CP work experience

2 years CP work experience

3 years CP work experience

PLUS

4-year physical science or engineering degree

2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training

High school diploma or GED including algebra and logarithms training

STRONGLY RECOMMENDED

CP Tester Certification or equivalent training

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■

26 2011 Training & Certification Guide

Corrosion Theory CP Fundamentals Field Measurements and Instrumentation DC Power Sources Safety Specific to CP CP Recordkeeping

For an updated schedule of courses, visit www.nace.org

CP 2—Cathodic Protection Technician Skill Assessment

To receive the Cathodic Protection Technician certification, a student must pass an open book, written exam and a closed book, practical exam with a grade of 70% or greater. Upon successful completion of the examination, a Certified NACE Cathodic Protection Technician will possess the following skills and knowledge factors: ■■ Perform advanced field tests (including current requirement test, shorted casing test, IR drop test, soil resistivity, and interference tests) and evaluate the results ■■ Perform tests to verify the presence of stray current interference and recommend method(s) to mitigate the interference ■■ Understand AC voltage and its mitigation ■■ Maintenance of documentation and records, including data plotting and analysis ■■ Conduct and understand the importance of periodic surveys, including IR-Free readings, polarization decay tests, and current measurements ■■ Test and troubleshoot rectifier component parts ■■ Understand corrosion coupon test stations ■■ Understand code requirements related to CP

Reference Materials Included with Course Registration Fees

Students receive the CP 2–Cathodic Protection Technician course manual on CD prior to the start of the course. A printed course manual, as well as Cathodic Protection Survey Procedures by W. Brian Holtsbaum, are provided to students on-site.

5.0 CEUs

CP 2—Cathodic Protection Technician Exam Only 4.5-Hour Examination Description

Candidates meeting the prerequisites for CP 2 may sit for the Cathodic Protection Technician Certification exam without taking the CP 2–Cathodic Protection Technician course. The exam-only option consists of the same 2.5-hour written exam and 2-hour practical exam offered in the CP 2–Cathodic Protection Technician Course. Exam Only candidates receive a CP 2–Cathodic Protection Technician course manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 2 course offerings. Candidates may only attend the course on the day of the exam.

Fees

Member—$655 Nonmember—$805

Prerequisites

All prerequisites must be met in order to register for the exam only option. Candidates have three paths from which to choose. If choosing to take the exam only option for certification, please note that candidates must also have training equivalent to the information presented in the CP 2–Cathodic Protection Technician course. An approved application is required before certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam Only Option

Qualified candidates may sit for the Cathodic Protection Technician Certification exam without taking the class. The written exam is open book so that candidates can bring their own references; however, the practical exam is closed book. Due to the difficulty level of the Exam Only Option, NACE highly recommends that individuals have prior CP training equivalent to the CP 2–Cathodic Protection Technician course in addition to the prerequisites listed for CP 2. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@nace.org. Registration fees for exam only candidates are nonrefundable.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 2—Cathodic Protection Technician—Maritime Fees Advance Registration Member—$1,495 Nonmember—$1,670 Standard Registration Member—$1,645 Nonmember—$1,820 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Materials Included with Course Registration Fees

6-Day Classroom Course

1st day: 1 p.m. to 6:30 p.m. • 2nd–5th days: 8 a.m. to 6:30 p.m. 6th day: 8 a.m. to 3 p.m., unless otherwise noted

Description

Developed for NAVSEA (part of the U.S. Navy), this intensive six-day course presents CP technology to prepare students for the NACE Cathodic Protection Technician Certification examination. The course represents a parallel path to certification with specific discussion pertaining to shipboard cathodic protection. It also provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current CP systems. Course topics include intermediate level discussions of corrosion theory and CP concepts including those specific to ships, types of CP systems, AC and DC stray current interference, and advanced field measurement techniques specific to ships.

Who Should Attend

Students receive the CP 2–Marine Cathodic Protection Technician Course Manual on CD prior to the start of course. A printed course manual, as well as Cathodic Protection Survey Procedures by W. Brian Holtsbaum, are provided to students on-site.

This course is designed for individuals who work in the maritime industry, have a working knowledge of shipboard cathodic protection, or have extensive years of CP field experience with a technical background. Students must complete a preliminary application for certification at least 60 days in advance so that education and prerequisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balancing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1—Cathodic Protection Tester or equivalent; and comprehensive knowledge of electrochemistry, electricity, electrical laws and series and parallel circuits, meter operation, and CP fundamentals.

5.0 CEUs

For each path, all prerequisites must be met in order to register for the CP2—Cathodic Protection Technician–Maritime course.

Prerequisites

Path 1

Path 2

Path 3

1 year CP work experience

2 years CP work experience

3 years CP work experience

PLUS

4-year physical science or engineering degree

2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training

High school diploma or GED including algebra and logarithms training

STRONGLY RECOMMENDED

CP Tester Certification or equivalent training

28 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 2—Cathodic Protection Technician—Maritime Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Corrosion Theory CP Fundamentals CP Systems Corrosion Resistant Materials Used in Marine Vessels DC Power Sources for CP and Shipboard CP Safety Specific to CP Field Measurements Specific to Marine Vessels Stray Current and CP Interference Monitoring CP Systems Troubleshooting

Skill Assessment

To receive the Marine Cathodic Protection Technician certification, a student must pass an open book, written exam and a closed book, practical exam with a grade of 70% or greater. Upon successful completion of the examination, a Certified NACE Marine CP Technician will possess the following skills and knowledge factors: ■■ Perform advanced field tests and evaluate the results ■■ Perform tests to verify the presence of stray current interference and recommend method(s) to mitigate the interference ■■ Maintenance of documentation and records, including data plotting and analysis ■■ Conduct and understand the importance of periodic surveys, including IR Free readings, polarization decay tests, and current measurements ■■ Test and troubleshoot rectifier component parts ■■ Understand corrosion coupon test stations ■■ Understand code requirements related to CP ■■ Understand AC voltage and its mitigation

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 3—Cathodic Protection Technologist Parallel Path to Certification for

n Corrosion Technologist n Senior Corrosion Technologist

See pages 54 - 55 for details.

Fees Advance Registration Member—$1,310 Nonmember—$1,485 Standard Registration Member—$1,460 Nonmember—$1,635 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

6-Day Classroom Course

1st day: 10 a.m. to 6:30 p.m. • 2nd – 5th days: 8 a.m. to 6:30 p.m. 6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted

Description

The CP 3–Cathodic Protection Technologist course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Technologist Certification examination. The course concludes with a 5-hour written and a 2.5-hour problem solving exam.

Who Should Attend

This course is designed for individuals with extensive CP field experience and a strong technical background in cathodic protection. Students should complete a preliminary application for certification at least 60 days in advance so prerequisites can be verified.

Prerequisites

For each path, all prerequisites must be met in order to register for the CP 3–Cathodic Protection Technologist Course. A strong algebra background, with thorough understanding of units conversions and scientific notation, is required as a minimum mathematics prerequisite. A basic understanding of trigonometry and geometry is recommended.

Path 1

Path 2

Path 3

3 years CP work experience with progressively increasing technical responsibilities

6 years CP work experience with progressively increasing technical responsibilities

8 years CP work experience with progressively increasing technical responsibilities

PLUS

4-year physical science or engineering degree

2 years post-high school training from an approved math or science technical/trade school including algebra and logarithm training

High school diploma or GED including algebra and logarithm training

STRONGLY RECOMMENDED

CP Technician certification or equivalent training

Course Highlights (including but not limited to) Reference Materials Included with Course Registration Fees

Students receive the CP 3–Cathodic Protection Technologist course manual on CD prior to the start of the course. A printed course manual is provided to students on-site.

5.4 CEUs

■■ ■■ ■■ ■■ ■■ ■■

CP Theory CP Criteria CP Interference Detecting Stray Current, AC Interference, and Telluric Current Interference CP Design Fundamentals Design Calculations (circuit resistances, system capacity and life, number of anodes, driving voltage) ■■ Evaluation of System Performance ■■ Troubleshooting Cathodic Protection Systems

Skill Assessment

To receive the Cathodic Protection Technologist certification, a student must pass a written and a practical examination with a grade of 70% or greater. Upon successful completion of the examination, a Certified NACE CP Technologist will possess the following skills and knowledge factors:

■■ Understand activation, concentration, and resistance polarization, and the mathematical expressions of these concepts. ■■ Understand the factors that affect polarization (area, temperature, relative movement, ion concentration, oxygen concentration). ■■ Understand the NACE criteria for CP, be able to apply the criteria, and make adjustments as necessary to CP systems in compliance with the criteria defined by the company where the technologist is employed.

30 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 3—Cathodic Protection Technologist ■■ Understand the concept of current distribution and be able to determine ideal current distribution for a CP system taking into account the factors affecting current distribution (anode-to-cathode separation distance, electrolyte and structure resistivity variation, current attenuation). ■■ Perform advanced cathodic protection testing using correct measurement techniques to monitor CP system performance, and accurately interpret the data collected to ensure optimum CP system performance. Based on data collected, determine if correction/ modifications to system components are necessary. ■■ Identify errors in data collection/CP measurements including contact resistance errors, voltage drop errors, and reference electrode errors. ■■ Conduct and document interference tests to determine if interference exists and identify the source of the interference. ■■ Upon determination of interference, identify and implement a method of control that will mitigate the effects of the stray current. ■■ Design and install simplistic forms of galvanic and impressed current cathodic protection facilities, and perform the necessary mathematical calculations.

CP 3–Cathodic Protection Technologist Exam Only 7.5-Hour Examination Fees

Description

Candidates meeting the prerequisites for CP 3 may sit for the Cathodic Protection Technologist Certification exam without taking the CP 3–Cathodic Protection Technologist course. The exam only option consists of the same 5-hour written exam and 2.5-hour problem solving exam offered in the CP 3–Cathodic Protection Technologist Course. Exam Only candidates receive a copy of the CP 3–Cathodic Protection Technologist course manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 3 course offerings. Candidates may only attend the course on the day of the exam.

Member—$655 Nonmember—$805

Prerequisites

The same work experience requirements and prerequisites that apply to the CP 3–Cathodic Protection Technologist Course apply to the exam only option. Candidates have three prerequisite paths from which to choose. If choosing to take the exam-only option for certification, please note that candidates must also have CP training equivalent to the training presented in the CP 3 course. An approved application is also required before this certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam Only Option

Qualified candidates may sit for the Cathodic Protection Technologist Certification exam without taking the class. The written exam is open book so that candidates can bring their own references; however, the practical exam is closed book. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 4—Cathodic Protection Specialist Parallel Path to Certification for

n Corrosion Technologist n Senior Corrosion Technologist See pages 54 - 55 for details.

Reference Materials Included with Course Registration Fees

Students receive the CP 4–Cathodic Protection Specialist Course manual on CD prior to the start of the course. A printed course manual and Handbook of Cathodic Corrosion Protection: Theory and Practice of Electrochemical Protection Processes are provided to students on site.

5.6 CEUs

6-Day Classroom Course

1st day: 1 p.m. to 7:30 p.m. • 2nd–5th days: 8 a.m. to 7:30 p.m. 6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted

Description

The CP 4–Cathodic Protection Specialist course is an intensive 6-day class focusing on the principles and procedures for CP design on a variety of structures for both galvanic and impressed current systems. The course discusses theoretical design concepts, considerations that influence the design (environment, structure type/materials of construction, coatings), design factors, and calculations (including attenuation). Classroom instruction is comprised of lecture, in-class discussion, and practice with design examples on various structures (i.e., pipelines, tanks and well casings, offshore applications, and steel reinforcing in concrete structures). The course concludes with a 5-hour written and a 2.5-hour problem solving examination. The examination is open book and students are welcome to bring any reference material they would like to the examination.

Who Should Attend

This course is designed for those individuals involved in the design, installation, and maintenance of CP systems. Prior to taking the NACE training course or the exam, students must have completed college or university-level courses in algebra, geometry, and trigonometry, and must have significant amounts of practical experience in CP design. NOTE: The CP Specialist examination is challenging, and the CP 4–Cathodic Protection Specialist course is intended as a refresher course for individuals already meeting the experience and education prerequisites for the exam. A direct progression from Cathodic Protection Technologist (CP 3) to Cathodic Protection Specialist (CP 4) does not exist. Participating only in the CP 4–Cathodic Protection Specialist course does not ensure success on the Cathodic Protection Specialist examination. Substantial experience involving all aspects of cathodic protection, including design and formal education in math/science/engineering, is critical to students’ success in the course and examination. Attendance at the Cathodic Protection Technologist course is highly recommended before taking the CP 4– Cathodic Protection Specialist course or exam only option.

Prerequisites

For each path, all prerequisites must be met in order to register for the CP 4–Cathodic Protection Specialist course. A strong background in advanced algebra, trigonometry, and geometry is recommended as a minimum mathematics prerequisite.

Path 1

Path 2

4 years CP work experience, including 4 years in responsible charge

6 years CP work experience, including 4 years in responsible 12 years CP work experience, including 4 years in responsible charge charge

Path 3

PLUS

A Bachelor’s degree in one of the following: • Engineering • Physical Sciences

4-year physical science or engineering degree

2 years post-high school training in math or science from an approved technical/trade school including algebra, trigonometry, and logarithms training

STRONGLY RECOMMENDED

An advanced degree in engineering or physical science that required a qualification exam, such as: • P.E., P.Eng, or equivalent • EIT registration or equivalent CP Technologist Certification or equivalent training

CP Technologist Certification or equivalent training

32 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP 4—Cathodic Protection Specialist Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■

Concept of CP Factors Influencing CP Design CP Systems Design Factors and Calculations Design examples for the following structures/environments: —Transmission and Other Pipelines, Tanks, and Well Casings —Marine and Offshore Applications —Water Tanks, Surface Condensers, and Thickeners —Steel Reinforcing in Concrete Structures

Skill Assessment

To receive the Cathodic Protection Specialist certification, a student must pass an open book, written exam with a grade of 70% or greater. Upon successful completion of the examination, a Certified NACE Cathodic Protection Specialist will possess the following skills and knowledge factors: ■■ Design complete CP systems in a variety of industry applications including water tanks, aboveground and underground storage tanks, and pipelines ■■ Demonstrate knowledge of rectifier and ground bed installation, along with source code calculations and protective coatings ■■ Perform corrosion analysis on the job site ■■ Manage and direct field tests ■■ Apply new technologies to existing CP programs ■■ Provide formal training to understudies on basic and advanced CP concepts ■■ Understand and comply with codes, regulations, reporting procedures, and standard practices

CP 4—Cathodic Protection Specialist Exam Only 7.5-Hour Examination

Fees

Description

Candidates meeting the prerequisites for CP 4 may sit for the Cathodic Protection Specialist exam without taking the CP 4-Cathodic Protection Specialist course. The exam only option consists of the same 5-hour written and 2.5-hour problem solving exams offered in the CP 4 course. Exam Only candidates receive a copy of the CP 4–Cathodic Protection Specialist Course manual by mail after registering for the exam. Examinations are offered the last day of the regularly scheduled CP 4-Cathodic Protection Specialist course offerings. Candidates may only attend the course on the day of the exam.

Member—$655 Nonmember—$805

Prerequisites

The same work experience requirements and prerequisites that apply to the CP 4–Cathodic Protection Specialist Course apply to the exam only option. Candidates have three prerequisite paths from which to choose. An approved application is required before certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam Only Option

Qualified candidates may sit for the Cathodic Protection Specialist Certification exam without taking the CP 4 course. The written exam is open book so that candidates can bring their own references. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@ nace.org. Registration fees for exam only candidates are nonrefundable. 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

CP Interference Fees Advance Registration Member—$1,310 Nonmember—$1,485 Standard Registration Member—$1,460 Nonmember—$1,635 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Materials Included with Course Registration Fees

Students receive the CP Interference course manual on CD prior to the start of the course. A printed course manual is provided to students on-site.

5.0 CEUs

6-Day Classroom Course

1st day: 1 p.m. to 6:30 p.m. • 2nd–5th days: 8 a.m. to 6:30 p.m. 6th day: 8 a.m. to 3 p.m., unless otherwise noted

Description

The Cathodic Protection Interference course is a 6-day course focusing on AC and DC interference. The course provides in-depth coverage of both theoretical concepts and practical applications of identifying interference and interference mitigation techniques. Students will learn to identify the causes and effects of interference, conduct tests to determine if an interference condition exists, and perform calculations required to predict AC interference. Classroom instruction is comprised of lecture and discussion, in-class experiments, case studies, and group exercises. The course concludes with a 5-hour written exam.

Who Should Attend

This course is designed for individuals with extensive CP field experience, a strong background in mathematics, and a strong technical background in cathodic protection.

Prerequisites ■■ ■■ ■■ ■■

CP 3—Cathodic Protection Technologist certification recommended Minimum of 3 years CP work experience Thorough understanding of: —Units conversions —Scientific notation —Advanced algebra —DC circuits Previous exposure to: —Basic AC circuits —Complex numbers (i.e., imaginary numbers) —Interference testing

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■

34 2011 Training & Certification Guide

Effects of Stray Current, AC Voltage, and Telluric currents on Metallic Structures Detecting Stray Current, AC Interference, and Telluric current Deleterious Effects of AC and DC Interference Mitigation and Monitoring of AC and DC Interference Predicting AC Interference

For an updated schedule of courses, visit www.nace.org

Corrosion Assessment Training

hips and fixed offshore structures, such as platforms, are subject to formidable operating conditions in severe environments that are highly susceptible to corrosion. Corrosion Assessment Training at NACE is for the corrosion professional working in either the offshore platform environment (O-CAT) or the shipboard marine environment (S-CAT). Corrosion Assessment Training shows students how to address inspection and maintenance planning in corrosion prevention systems that not only result in the reduction of deterioration of assets, but also is in compliance with regulatory requirements and international standards.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Offshore Corrosion Assessment Training (O-CAT) Fees Advance Registration Member—$1,395 Nonmember—$1,570 Standard Registration Member—$1,545 Nonmember—$1,720 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees

Students receive the following guide on-site: n Offshore Platform Photo Assessment Guide

4.0 CEUs

36 2011 Training & Certification Guide

5-Day Classroom Course

1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

Description

The Offshore Corrosion Assessment Training course is an intense five-day program addressing the elements of in-service inspection and maintenance planning for fixed offshore structures. The course also focuses on the Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) A-B-C facility evaluation grading system requirements for Level 1 Inspection Reporting.

Who Should Attend

This course is valuable to anyone involved in corrosion control and integrity management of fixed offshore structures. The curriculum benefits varying degrees of personnel, from those with management and planning responsibilities to the field inspectors conducting in-service inspections of the facility. The program is also valuable for offshore platform operations personnel to better understand corrosion prevention systems utilized on offshore structures and their successful implementation.

Prerequisites

No prior training is required.

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Corrosion and Corrosion Control Protective Coatings Systems Splash-Zone Systems Cathodic Protection Systems Regulatory Issues Corrosion Prevention Maintenance Programs Facility Breakdown Condition Grading Systems Assessment Standards Safety In-Service Evaluation Equipment Inspection Planning BOEMRE Level 1 Inspections (ABC Grading) Data Utilization and Maintenance Planning

For an updated schedule of courses, visit www.nace.org

Shipboard Corrosion Assessment Training (S-CAT) 5-Day Classroom Course

Fees

1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

Description

The Shipboard Corrosion Assessment Training course provides a foundation of coatings, corrosion, and corrosion control knowledge for assessing the condition of tanks and other military ship structures, while determining the required actions necessary to effectively maintain fully operational status. The course equips the naval assessor with practical guidelines for surveying and evaluating the condition of the protective coating system on specific areas of U.S. Navy vessels. During the S-CAT course students will use the Shipboard Corrosion Assessment Immersion Tool, the only virtual training environment for corrosion in the marine industry. This training aid allows students to experience a direct simulation of events that occur on military and commercial ships every day. The desired end result is a consistent and orderly process of evaluation that has the confidence of everyone involved in the maintenance cycle.

Advance Registration Member—$1,100 Nonmember—$1,275 Standard Registration Member—$1,250 Nonmember—$1,425 (Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

4.0 CEUs

Who Should Attend ■■ ■■ ■■ ■■ ■■

Coating Inspectors Shipyard Planners Design Engineers Type Commander Representatives Port Engineers

Prerequisites

Attendees should possess a High School diploma (or GED) and have a minimum of three months experience in the evaluation of corrosion or coatings breakdown on marine vessels.

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Visual Assessment Exercises for all ship areas Corrosion Theory Corrosion Control Methods Cathodic Protection Overview Protective Coatings and Linings Overview Corrosion Resistant Materials Safety Corrosion Protection System Evaluation Evaluation Tools and Equipment Grading System for U.S. Navy Ships (CCIMS)

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

New to the Pipeline Industry? The Operator Qualification (OQ) Program at NACE is a self-paced, online training and assessment program addressing pipeline corrosion fundamentals in cathodic protection, coatings and internal corrosion. The program is a starting point that provides a path to further professional development through a number of NACE training & certification programs for the pipeline industry.

For more details about this course, see page 40 - 41.

Interested in becoming a NACE OQ proctor? Visit www.nace.org/oq for proctor qualifications and applications.

38 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Pipeline Program

ue to changing regulatory requirements and the aging of the industry’s pipeline systems, operators are implementing integrity management plans to ensure the longevity and reliability of this critical infrastructure. Significant cost savings can be realized by implanting available corrosion prevention and mitigation technologies as a component of an existing integrity management plan. Today operators have to be aware of how corrosion and other defects can impact the integrity of the pipeline to ensure safe operation without failures that may jeopardize public safety, result in product loss, or cause property and environmental damage. In response to industry requests for formal training and certification in pipeline corrosion integrity management, NACE is introducing three new classes that will launch in the fall of 2011: ■■ Direct Assessment ■■ In-Line Inspection ■■ Pipeline Corrosion Assessment Field Techniques (P-CAFT)

These courses may be taken as stand-alone training for continued professional development or as part of the path toward the Pipeline Corrosion Integrity Management (PCIM 1 or PCIM 2) certification.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

NACE Operator Qualification Program NACE is the OQ provider for IUPAT Members with the support of:

NACE OQ—in cooperation with The NACE OQ Training Program is delivered online, conforms to PHMSA OQ requirements and provides NACE credentials. The curriculum is designed to train pipeline professionals to meet the pipeline maintenance and safety requirements specified by the US Department of Transportation (DOT) Code of Federal Regulations (CFR) 142 parts 192 and 195. This program is geared for employees who have little or no experience in pipeline corrosion and require training on OQ covered tasks. The program is: ■■ Comprehensive - includes all Covered Tasks on page 41 ■■ Beginner Level – No experience necessary ■■ Filled with high-quality video demonstrations ■■ Developed in partnership with the University of Akron’s distance learning lab program The NACE OQ Program is also a starting point for a path to further professional development through NACE training and certification. For more information, contact NACE FirstService by phone: +1 281-228-6223, or by e-mail: FirstService@nace.org.

Online Written Assessments

Online written assessments are available for all corrosion-related covered tasks and Abnormal Operating Conditions (AOC). The assessments are completed online in the presence of a NACE approved site or proctor.

Performance Verifications (hands-on assessments)

Performance verification (PV) assessments are available for all corrosion-related covered tasks and are designed to determine if an individual can satisfactorily perform a covered task. Performance must be evaluated by a NACE-approved Field Evaluator. The PV documents, protocols, and additional information about evaluators are available from www.nace.org.

Proctor Fees

The fees listed on page 41 represent NACE fees. Proctors are required for examinations and proctors may or may not have additional fees.

Discounts For a list of NACE Covered Tasks, refer to page 41.

40 2011 Training & Certification Guide

Corporate discounts are available for training of more than 50 students. Please contact FirstService by phone: + 1 281-228-6223, or by e-mail: FirstService@nace.org. If you have unique OQ training needs, contact NACE FirstService by phone: + 1 281-228-6223, or by e-mail: FirstService@nace.org.

For an updated schedule of courses, visit www.nace.org

NACE Operator Qualification Program Standard Industry OQ Covered Tasks

Module

NACE Covered Task 1

Measure structure-to-Electrolyte potentials

NACE Covered Task 2

Conduct close interval survey

NACE Covered Task 3

Test to detect interference

NACE Covered Task 4

Inspect and perform electrical test of bonds

NACE Covered Task 5

Inspect and test isolation devices

NACE Covered Task 6

Inspect and Verify Test Lead Continuity

NACE Covered Task 7

Repair damaged test leads

NACE Covered Task 8

Install test leads by non-exothermic welding methods

NACE Covered Task 9

Install test leads by exothermic welding methods

NACE Covered Task 10

Obtain a voltage and current output reading from a rectifier

NACE Covered Task 11

Check for proper operation of a rectifier

NACE Covered Task 12

Troubleshoot rectifier bond connections

NACE Covered Task 13

Repair or replace defective rectifier components

NACE Covered Task 14

Adjustment of rectifier

NACE Covered Task 15

Install bonds

NACE Covered Task 16

Install galvanic anodes

NACE Covered Task 17

Install rectifiers

NACE Covered Task 18

Install impressed current ground beds

NACE Covered Task 19

Repair shorted casings

NACE Covered Task 20

Locate Underground Pipeline Facilities

NACE Covered Task 21

Visual inspection of atmospheric coating

NACE Covered Task 22

Prepare surface for coating using hand and power tools

NACE Covered Task 23

Perform water pressure cleaning

NACE Covered Task 24

Prepare surface for coating by abrasive blasting

NACE Covered Task 25

Apply coating using hand application methods

NACE Covered Task 26

Apply coating using spray applications

NACE Covered Task 27

Use coating inspection tools

NACE Covered Task 28

Inspect for physical damage on buried or submerged pipe

NACE Covered Task 29

Inspect for external corrosion on buried or submerged pipe

NACE Covered Task 30

Inspect the condition of external coating on buried or submerged pipe

NACE Covered Task 31

Measure pit depth with pit gauge

NACE Covered Task 32

Measure wall thickness with handheld ultrasonic meter

NACE Covered Task 33

Measure corroded area

NACE Covered Task 34

Insert and remove internal corrosion coupons

NACE Covered Task 35

Monitor probes (on-line) for internal corrosion

NACE Covered Task 36

Perform Internal Corrosion Remediation

NACE Covered Task 37

Visual Inspection for Internal Corrosion

NACE Covered Task 38

Abnormal Operating Conditions (AOC)

ALL

NACE Covered Task 39

Abnormal Operating Conditions (AOC) for natural gas pipelines

ALL

NACE Covered Task 40

Abnormal Operating Conditions (AOC) for hazardous liquids

ALL

2011 Training & Certification Guide

The NACE OQ program can be purchased in four modules: ■■ All 40 Covered Tasks $400 ■■ Cathodic Protection Module (CP) - $200 ■■ Coating Module (C) $200 ■■ Internal Corrosion Module (IC) $200 All modules include the selected covered tasks as well as Corrosion Assessment, Safety and Abnormal Operating Conditions. Fees for the NACE OQ training packages listed above include access to online training and online written assessments. They do not include any proctoring fees or Performance Verifications.

For an updated schedule of courses, visit www.nace.org

Internal Corrosion for Pipelines - Basic Parallel Path to Certification for

n Internal Corrosion Technologist See page 50 for details.

Fees Advance Registration Member—$1,660 Nonmember—$1,835 Standard Registration Member—$1,810 Nonmember—$1,995

(Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees Students receive the Internal Corrosion for Pipelines course manual on CD prior to the start of the course. A printed course manual and the Field Guide for Investigating Internal Corrosion of Pipelines are provided to students on-site.

5-Day Classroom Course

1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

Description

The Internal Corrosion for Pipelines - Basic course provides students with the fundamentals of implementing, monitoring, and maintaining an internal corrosion control program as part of an overall Pipeline Integrity Management program. This introductory level course focuses on internal corrosion of liquid and natural gas pipelines used for transmission, storage, and gathering systems. Classroom instruction consists of lecture, hands-on field testing, and case studies. The course concludes with both written and practical exams. The practical examination includes Operator Qualification (OQ) Covered Task Assessments for the following: (1) Insertion and removal of internal corrosion coupons, (2) Measurement of corroded area and pit depth measurement (with pit gauge), and (3) Measurement of wall thickness using handheld ultrasonic meter.

Who Should Attend

This course is geared toward individuals at the technologist level who have some background in corrosion and are familiar with pipeline operations.

Prerequisites

■■ High School Diploma ■■ 4 years internal corrosion work ■■ It is also recommended that students have successfully completed the NACE Basic Corrosion Course (see page 3) and high school chemistry.

Course Highlights (including but not limited to)

■■ ■■ ■■ ■■ ■■

Corrosion Theory - Types and Mechanisms Identification of Corrosion Mechanisms (Sampling and Monitoring) Investigation of Pipe/Components Removed from Service Internal Corrosion Mitigation Internal Corrosion Integrity Management

4.0 CEUs

Internal Corrosion for Pipelines - Basic (Exam Only Option) Fees

Member—$655 Nonmember—$805

42 2011 Training & Certification Guide

The Internal Corrosion for Pipelines - Basic (Exam Only Option) consists of a 2-hour written and a 2-hour practical examination. Students seeking certification for Internal Corrosion Technologist and are not enrolled in the Internal Corrosion for Pipelines - Basic course will take the same written and practical examinations offered in the classroom course.

For an updated schedule of courses, visit www.nace.org

Internal Corrosion for Pipelines - Advanced 5-Day Classroom Course

Parallel Path to Certification for

1st – 4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to noon, unless otherwise noted

Description

The Internal Corrosion for Pipelines - Advanced course focuses on the monitoring techniques and mitigation strategies required to assess internal corrosion and develop and manage internal corrosion control programs. Data interpretation, analysis and integration, as well as criteria for determining corrective action for high-level internal corrosion problems within a pipeline system, will be covered in detail.

Who Should Attend

Individuals responsible for implementation, maintenance, engineering, and/or management of internal corrosion control program for pipeline system.

Prerequisites

To attend this course, students should meet the requirements on one of the following paths: Path 1

Path 2

Path 3

Hold Internal Corrosion Technologist Certification

8 years internal corrosion work experience in a pipeline environment

4 years internal corrosion work experience in a pipeline environment PLUS Bachelor’s degree in one of the following: Chemistry, Microbiology, Biology, Chemical Engineering, Metallurgical Engineering

Course Highlights (including but not limited to) ■■ ■■ ■■ ■■

Threat Evaluation of a Pipeline System Assessment and Mitigation of Internal Corrosion Decision, Risk, Monitoring, and Maintenance Operations of a Pipeline System Preventing Corrosion in the Design of New Pipelines

n Senior Internal Corrosion Technologist See page 50 for details.

Fees Advance Registration Member—$1,660 Nonmember—$1,835 Standard Registration Member—$1,810 Nonmember—$1,995

(Advance registration fees and registration form must be received at NACE Headquarters 35 days prior to start date of course.)

Reference Material Included with Course Registration Fees

Students receive the IC Advanced course manual on CD prior to the start of the course. A printed course manual, as well as NACE

Corrosion Engineer’s Reference Book, Third Edition is

provided to students on-site.

4.0 CEUs

Internal Corrosion for Pipelines - Advanced (Exam Only Option) The Internal Corrosion for Pipelines - Advanced (Exam Only Option) consists of a 2-hour written examination. Students seeking certification for Senior Internal Corrosion Technologist and are not enrolled in the Internal Corrosion for Pipelines - Advanced course will take the same written examination offered in the classroom course.

2011 Training & Certification Guide

Fees Member—$655 Nonmember—$805

For an updated schedule of courses, visit www.nace.org

Pipeline Corrosion Assessment Field Techniques (P-CAFT) Coming Soon, Fall 2011 Description

In the Fall of 2011, NACE will introduce the Pipeline Corrosion Assessment Field Techniques (P-CAFT) course. P-CAFT will cover corrosion basic principles and theory, field techniques, direct assessment, in-line inspection and hydro testing techniques, indirect inspections, direct examination, safety and data documentation. The P-CAFT course may be taken as stand-alone training for continued professional development or a part of the path toward the Pipeline Corrosion Integrity Management (PCIM 1) certification.

Who Should Attend

The P-CAFT course is designed for maintenance, service, technical or field personnel responsible for the implementation and reporting of pipeline inspection activities.

Prerequisites

It is strongly recommended, before enrollment in P-CAFT, that students have successfully completed the following courses: ■■ CP 1 – Cathodic Protection Tester (page 24) ■■ NACE Coating Inspector Level 2 (page 11) or Coatings in Conjunction with Cathodic Protection (page 5)

Pipeline Corrosion Integrity Management Certification (PCIM 1) The Pipeline Corrosion Integrity Management (PCIM) Program at NACE offers two tracks. P-CAFT is a component of the PCIM 1 track. The PCIM 1 certification focuses on remediation technology and field techniques for carrying out integrity assessments in conjunction with implementing an integrity management program.

Skill Assessment

Upon successful completion, a PCIM 1 individual will possess the following skills and knowledge factors: ■■ Accurately collect data for use in the evaluation and monitoring of a pipeline corrosion integrity plan ■■ Recognize pipeline anomalies ■■ Evaluate a pipeline in-service using ECDA and ICDA methods and techniques ■■ Recognize problems and recommend solutions for technical issues with assessing conditions, data collection and measurement Please visit page 51 for specific information on how to achieve this certification.

44 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Pipeline Corrosion Integrity Management (PCIM) PCIM—Management

Parallel Path to Certification for

5-Day Classroom Course

1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

Description

The PCIM-Management course serves as the key training track for the PCIM professional who is expected to focus on the implementation and management of an integrity program for a pipeline system. The course provides comprehensive, up-to-date coverage of the various aspects of time-dependent deterioration threats to liquid and gas pipeline systems.

Who Should Attend

Individuals responsible for implementing and/or managing an integrity program for a pipeline system.

Course Highlights (including but not limited to)

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Components of Pipeline Integrity Overview of CFR 49 and Integrity Requirements Risk Assessment Technical Challenges to Pipeline Integrity Integrity Verification/Assessment Remediation Activities/Repair Methods Inspection and Assessment Intervals Post Integrity Assessment Risk Analysis

n Pipeline Corrosion Integrity Management (PCIM 2) See page 51 for details.

Fees Advance Registration Member—$1,550 Nonmember—$1,695 Standard Registration Member—$1,700 Nonmember—$1,845

4.0 CEUs

Prerequisites

No prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in physical science or engineering is recommended.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Pipeline Courses Coming Soon, Fall 2011

Direct Assessment Description

The Direct Assessment course will concentrate on internal, external and stress corrosion cracking direct assessment along with pre and post assessment, quality assurance, data analysis and integration, and remediation and mitigation activities. The course will also cover the benefits and limitations of Direct Assessment, its relationship to an overall integrity assessment program and industry standards, regulations and best practices.

Who Should Attend

Individuals responsible for implementing and/or managing an integrity program for a pipeline system.

In-Line Inspection Description

The In-Line Inspection (ILI) course will focus on ILI system selection, safety, operational issues, data analysis, quality assurance and post in-line inspection activities. The course will also cover the benefits and limitations of In-Line Inspection, its relationship to an overall integrity assessment program and industry standards, regulations and best practices.

Who Should Attend

Individuals responsible for implementing and/or managing an integrity program for a pipeline system.

Pipeline Corrosion Integrity Management Certification (PCIM 2) The Pipeline Corrosion Integrity Management (PCIM) Program at NACE offers two tracks. The Direct Assessment, In-Line Inspection and PCIM-Management courses are components of the PCIM 2 track. The PCIM 2 certification focuses on implementation and management of an integrity management program for a pipeline system. The emphasis at this level is on integrity verification and maintenance optimization.

Skill Assessment

Upon successful completion, a PCIM 2 individual will possess the following skills and knowledge factors: ■■ Interpret integrity related data ■■ Perform an overall integrity assessment on a pipeline system ■■ Calculate and quantify risk ■■ Make recommendations to company management on risk management issues Please visit page 51 for specific information on how to achieve this certification and parallel path options.

46 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

We took the best...and made it better! Building on the momentum of 27 years and over 15,000 inspectors, NACE International introduces an enhanced CIP learning experience.

Weâ&#x20AC;&#x2122;re delivering the same great product the world expects.

Weâ&#x20AC;&#x2122;ve just dialed it up a notch!

Enhancements to the program include more hands-on time and instruction with new inspection methods and equipment, better graphics and video presentation, and additional emphasis on international standards.

For more information on CIP and upcoming course schedules, visit www.nace.org/cip. 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance Coating Inspector Program (CIP) Students must successfully complete each course and its corresponding exam before moving on to the next level of the program. For more information about the NACE Coating Inspector Program, please refer to page 8.

NACE Coatings Inspector (CIP) Certification Path NACE Coating Inspector Level 1 - Certified ■■

Bridge Specialty Stamp ■■

Successful completion of CIP 1 course and exam (through Classroom course, or DVD with accompanying Exam Course 1) (page 9)

Successful completion of CIP One Day Bridge Course (page 16)

NACE Coating Inspector Level 2 – Marine Certified ■■

NACE Coating Inspector – Nuclear Facilities Certification Supplement (NFCS)

NACE Coating Inspector Level 2 – Certified ■■

Successful completion of CIP 2 course and exam (through Classroom course, or DVD with accompanying Exam Course 2) (page 11)

Path 1 ■■

■■

NACE Certified Coating Inspector – Level 3 ■■ ■■

Successful completion of CIP Level 1, 2 and pass the CIP Level 3 Peer Review (page 14) Complete and submit CIP Level 3 Certification Application to NACE

48 2011 Training & Certification Guide

Successful completion of CIP Level 2, Maritime Emphasis and exam (page 13)

■■

Successful completion of Nuclear Power Plant Training for Coating Inspector course and exam (page 15) Document 160 hours of work with coatings focused projects for a nuclear power plant Hold an active NACE CIP 1 Certification or higher Complete and submit Certification Application within 24 months of completing the exam

Path 2 ■■

■■

Successful completion of Nuclear Power Plant Training for Coating Inspector exam (page 15) Document 400 hours of work with coatings focused projects for a nuclear power plant Hold an active NACE CIP 1 Certification or higher Complete and submit Certification Application within 24 months of completing the exam

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance Cathodic Protection (CP) Students may choose to take the CP courses in succession or those with more experience and who meet the prerequisites may choose which course would benefit them in their career. For more information about the NACE Cathodic Protection Training and Certification program, please refer to page 23

NACE Cathodic Protection (CP) Certification Path

Additional NACE CP Training Courses

CP 1 – Cathodic Protection Tester ■■

Successful completion of CP 1 classroom course and exam or exam only option (page 24)

Coatings in Conjunction with Cathodic Protection ■■

CP 2 – Cathodic Protection Technician ■■ ■■

Prerequisite: It is strongly recommended that students have CP 1—Cathodic Protection Tester certification or equivalent training (page 5)

Successful completion of CP 2 classroom course and exam or exam only option (page 26) Submit CP Technician Certification Application to NACE

CP 3 – Cathodic Protection Technologist ■■ ■■

Successful completion of CP 3 classroom course and exam or exam only option (page 30) Submit CP Technologist Certification Application to NACE

CP Interference ■■

CP 4 – Cathodic Protection Specialist ■■ ■■

Prerequisite: It is strongly recommended that students have CP 3—Cathodic Protection Technologist certification (page 34)

Successful completion of CP 4 classroom course and exam or exam only option (page 32) Submit CP Specialist Certification Application to NACE

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance Corrosion Assessment Training & Certification SCAT Technician

OCAT Technician

Successful completion of Shipboard Corrosion Assessment Training (S-CAT) course and exam (page 37)

■■

Successful completion of Offshore Corrosion Assessment Training (O-CAT) course and exam (page 36)

Internal Corrosion Training & Certification Internal Corrosion Technologist Path 1 ■■ ■■ ■■ ■■

Application – Internal Corrosion Technologist High School Diploma 4 years work experience including some background in corrosion and pipeline operations One of the following: □□ Internal Corrosion for Pipeline – Basic course and exam or exam only option (page 42) □□ Internal Corrosion Technologist exam

Path 2 ■■ ■■

■■ ■■

Application – Internal Corrosion Technologist Bachelor’s degree in Chemistry, Biology, Microbiology, Chemical or Metallurgical Engineering 2 years work experience in internal corrosion in a pipeline environment One of the following: □□ Internal Corrosion for Pipeline – Basic course and exam or exam only option (page 42) □□ Internal Corrosion Technologist exam

Senior Internal Corrosion Technologist Path 1 ■■ ■■ ■■ ■■

Application – Senior Internal Corrosion Technologist Bachelor’s degree in Physical Science or Engineering Work experience in Internal Corrosion Internal Corrosion for Pipeline – Advanced course and exam or exam only option (page 43)

50 2011 Training & Certification Guide

Path 2 ■■ ■■ ■■

Application – Senior Internal Corrosion Technologist Internal Corrosion Technologist certification Internal Corrosion for Pipeline – Advanced course and exam or exam only option (page 43)

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance Pipeline Corrosion Integrity Management (PCIM) Training & Certification PCIM 1 ■■ ■■ ■■ ■■

Successful completion Internal Corrosion for Pipelines- Basic classroom course and exam or exam only option (page 42) Successful completion of Pipeline Corrosion Assessment Field Techniques (P-CAFT) classroom course and exam (page 44) 2 years of pipeline work experience Complete and submit PCIM 1 Certification Application to NACE

PCIM 2 ■■ ■■ ■■ ■■

Successful completion of Direct Assessment classroom course and exam (page 46) Successful completion of In-Line Inspection classroom course and exam (page 46) Successful completion of PCIM-Management classroom course and exam (page 45) Complete and submit PCIM 2 Certification Application to NACE

PLUS ONE OF THE FOLLOWING PATHS: Path 1 ■■

PCIM 1 Certification (page 51)

Path 2 ■■

Senior Corrosion Technologist Certification (page 55)

Path 3 ■■

■■

2011 Training & Certification Guide

Senior Internal Corrosion Technologist Certification (page 50) CP 2 – Cathodic Protection Technician Certification (page 26) CIP Level 2 Certification (page 11)

Path 4 ■■

■■

8 years pipeline work experience High School diploma or GED

Path 5 ■■ ■■

4 years pipeline work experience Bachelor’s Degree in Engineering or Physical Science

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance Protective Coating Program Training & Certification Protective Coating Technologist Parallel Path

Traditional Path

(Certification through course work)

(Certification through certification exams)

Option #1 ■■ ■■ ■■ ■■

Option #1

Succesful completion of PCS 1 Basic Principles course and exam (page 19) High school diploma or GED 6 years work experience in Protective Coatings Field Complete and submit Protective Coating Technologist Application to NACE

Option #2 ■■ ■■ ■■ ■■

Succesful completion of PCS 1 Basic Principles course and exam (page 19) Bachelor’s degree in Physical Science or Engineering 3 years work experience in Protective Coatings Field Complete and submit Protective Coating Technologist Application to NACE

■■ ■■ ■■ ■■ ■■

High school diploma or GED 6 years work experience in Protective Coatings Field Training equivalent to that contained in PCS 1 – Basic Principles Course Successful completion of the Protective Coating Technologist Exam Complete and submit Protective Coating Technologist Application to NACE

Option #2 ■■ ■■ ■■ ■■ ■■

Bachelor’s degree in Physical Science or Engineering 3 years work experience in Protective Coatings Field Training equivalent to that contained in PCS 1 – Basic Principles Course Successful completion of the Protective Coating Technologist Exam Complete and submit Protective Coating Technologist Application to NACE

Protective Coating Specialist Parallel Path

Traditional Path

(Certification through course work)

(Certification through certification exams)

Option #1 ■■ ■■ ■■ ■■

■■

Succesful completion of PCS 2 Advanced course and exam (page 19) Succesful completion of PCS 3 Management course and exam (page 19) 4 years work experience in Protective Coatings Field One of the following: □□ Bachelor’s degree in Physical Science or Engineering □□ NACE Protective Coatings Technologist Certification □□ NACE CIP Peer Certification □□ Frosio Coating Inspector Level III □□ SSPC Protective Coatings Specialist

Option #1 ■■ ■■ ■■ ■■

Option #2 ■■ ■■

Complete and submit Protective Coating Specialist Application to NACE

Option #2 ■■ ■■ ■■ ■■ ■■

Succesful completion of PCS 2 Advanced course and exam (page 19) Succesful completion of PCS 3 Management course and exam (page 19) High school diploma or GED 8 years work experience in Protective Coatings Field Complete and submit Protective Coating Specialist Application to NACE

52 2011 Training & Certification Guide

12 years wok experience in Protective Coatings Field High school diploma or GED Successful completion of the Protective Coating Specialist Exam Complete and submit Protective Coating Specialist Application to NACE

■■ ■■

8 years work experience in Protective Coatings Field One of the following: □□ Bachelor’s degree in Physical Science or Engineering □□ NACE Protective Coatings Technologist Certification □□ NACE CIP Peer Certification □□ Frosio Coating Inspector Level III □□ SSPC Protective Coatings Specialist Successful completion of the Protective Coating Specialist Exam Complete and submit Protective Coating Specialist Application to NACE

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance NACE Specialty Certifications These certifications are geared toward individuals who are experienced, knowledgeable, and capable of performing work at an advanced level in both the theory and practice of a particular area of corrosion and corrosion control. To obtain one of these five specialty certifications, you must first meet the requirements listed, then submit the corresponding application, and successfully complete the appropriate proctored exam. To apply for the proctored exam, you will need…

Corrosion Specialist Path 1 ■■

■■ ■■

One of the following NACE certifications: □□ Certification – Chemical Treatment Specialist □□ Certification – Cathodic Protection Specialist □□ Certification – Materials Selection/Design Specialist □□ Certification – Protective Coating Specialist Successful completion of the Corrosion Specialist Exam Complete and submit Corrosion Specialist Application to NACE

Chemical Treatment Specialist Path 1 ■■ ■■

■■

Certification – Senior Corrosion Technologist (page 55) Successful completion of the Chemical Treatment Specialist Exam Complete and submit Chemical Treatment Specialist Application to NACE

Path 2 ■■ ■■

■■ ■■ ■■

4 years corrosion work experience in responsible charge One of the following: □□ Bachelor’s degree in Physical Science or Engineering □□ Engineer-in-Training registration or equivalent □□ Professional Engineer’s license Advanced degree in Physical Science or Engineering that required a qualification examination Successful completion of the Chemical Treatment Specialist Exam Complete and submit Chemical Treatment Specialist Application to NACE

Protective Coating Specialist Please see page 52 for specific information on how to achieve this certification and parallel path options.

Cathodic Protection Specialist Please see page 49 for specific information on how to achieve this certification.

Materials Selection / Design Specialist Path 1 ■■ ■■

■■

Certification – Senior Corrosion Technologist (page 55) Successful completion of the Materials Selection/Design Specialist Exam Complete and submit Materials Selection/Design Specialist Application to NACE

■■ ■■

■■ ■■ ■■

2011 Training & Certification Guide

Path 2

4 years corrosion work experience in responsible charge One of the following: □□ Bachelor’s degree in Physical Science or Engineering □□ Engineer-in-Training registration or equivalent □□ Professional Engineer’s license Advanced degree in Physical Science or Engineering that required a qualification examination Successful completion of the Materials Selection/Design Specialist Exam Complete and submit Materials Selection/Design Specialist Application to NACE

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance NACE Generalist Certifications Generalist Certifications can be obtained in one of two ways, through Parallel Path or Traditional Path. The Parallel Path allows you to achieve certification through taking courses, passing the exams, and then submitting an application for one of the Generalist Certifications listed below. With the Traditional Path, you obtain certification by meeting work experience and/or education requirements, passing the appropriate exam, and then completing the application process.

Protective Coating Technologist Please see page 52 for specific information on how to achieve this certification and parallel path options.

Corrosion Technician (Geared towards an individual with little work experience but has some knowledge of corrosion and corrosion control)

■■ ■■ ■■

Parallel Path

Traditional Path

(Certification through course work)

(Certification through certification exams)

Successful completion of Basic Corrosion course and exam (see page 3) Two years corrosion work experience Complete and submit Generalist Certification Application to NACE

■■ ■■

■■

Two years corrosion work experience To verify work experience, complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technician exam Successful completion of Corrosion Technician exam

Corrosion Technologist (Geared towards an individual with moderate experience and has some knowledge of corrosion and corrosion control)

■■ ■■ ■■ ■■ ■■

Parallel Path

Traditional Path

(Certification through course work)

(Certification through certification exams)

Successful completion of Basic Corrosion course and exam (see page 3) OR Corrosion Technician Certification One from Menu A One from Menu B Four years corrosion work experience Complete and submit Generalist Certification Application to NACE

■■ ■■

■■

Four years corrosion work experience Complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technologist exam Successful completion of Corrosion Technologist exam

*see menus A & B at the bottom of page 55.

54 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Certifications at a Glance NACE Generalist Certifications Senior Corrosion Technologist (Geared towards an experienced individual with practical knowledge in multiple areas of corrosion and its control)

Parallel Path

Traditional Path

(Certification through course work)

(Certification through certification exams)

Option #1 ■■

■■ ■■ ■■ ■■ ■■ ■■

■■

Eight years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with four years work experience in responsible charge Successful completion of Basic Corrosion course and exam (page 3) OR Corrosion Technician Certification Successful completion of Designing for Corrosion Control course and exam (page 7) One from Menu A One from Menu B One additional course from Menu A,B, or C Successful completion of Chemical Treatment Specialist Exam OR Internal Corrosion for Pipeline Basic (page 42) Complete and Submit Generalist Certification Application to NACE

■■

Eight years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with four years work experience in responsible charge Complete and Submit Generalist Certification Application to NACE prior to taking the Senior Corrosion Technologist Exam Successful completion of the Senior Corrosion Technologist Exam

Option #2 ■■

■■ ■■ ■■ ■■ ■■

■■

Eight years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with four years work experience in responsible charge Corrosion Technologist Certification Successful completion of Designing for Corrosion Control course and exam (page 7) One from Menu A One from Menu B Successful completion of Chemical Treatment Specialist Exam OR Internal Corrosion for Pipeline Basic (page 42) Complete and Submit Generalist Certification Application to NACE

Successful completion of: Menu A

Menu B

Menu C

CP Tester course and exam CP Technician course and exam* ■■ CP Technologist course and exam* ■■ CP Specialist course and exam* * Must meet work experience requirements

PCS 1 Basic Principles CIP Level 1 ■■ PCS 2 Advanced Note: you cannot obtain multiple credit toward certification from a single course

■■

■■ ■■

2011 Training & Certification Guide

■■ ■■

Coatings in Conjunction with Cathodic Protection

For an updated schedule of courses, visit www.nace.org

Renewing Your NACE Certification To uphold the integrity of your NACE Certification, you must renew your certification every three years. Renewal involves documentation of work experience and professional development. NACE International will contact you 60 days before your certification expires. It is the responsibility of persons certified by NACE International to apply for and complete the certification renewal process. Failure to receive a notice from NACE International shall not be accepted as reason for failure to apply and/ or complete the renewal process.

Renewal Period

Renewal Fees

Three (3) years for all certifications

Members—$140 per three years for all certifications Nonmembers—$350 per three years for all certifications

Professional Development Requirements

Professional development hours vary for certain levels of certification. The table below outlines the hours required for each certification type.

Specialist Certifications Certification

Hours/year

Work Experience Required (years)

Corrosion Specialist

1.5

CP 4 Specialist

1.5

Chemical Treatment Specialist

1.5

Materials Selection/Design Specialist

1.5

Protective Coatings Specialist

1.5

Corrosion Technician

1.5

Corrosion Technologist

1.5

Senior Corrosion Technologist

1.5

CP 1 Tester

1.5

CP 2 Technician

1.5

CP 3 Technologist

1.5

NACE Coating Inspector Level 1—Certified

1.5

NACE Coating Inspector Level 2—Certified

1.5

NACE Certified Coating Inspector—Level 3

1.5

NACE Certified Coating Inspector – Nuclear Facilities Certification Supplement

1.5

Internal Corrosion Technologist

13.5

2.5

Senior Internal Corrosion Technologist

2.5

Generalist Certifications

Cathodic Protection Certifications

Coating Inspector Certifications

Internal Corrosion Certification

56 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Certification FAQs Q: When will the new renewal requirements apply to my current certification? A: These requirements will go into effect the next time you renew your certification. Q: Do the new renewal requirements impact my current renewal date? A: No, your renewal date remains the same. Q: With the new renewal requirements in place, what action is required of me? A: Please note that it is your responsibility to know your expiration date; however, NACE will notify you when it is time to renew. At that time, the requirements listed in this Training & Certification Guide will take effect. Q: What qualifies as professional development? A: Professional development refers to educational activities that include, but are not limited to, corrosion related courses, seminars, meetings, technical papers, or presentations. Q: Which NACE Certifications offer a Parallel Path option? A: Corrosion Technician, Corrosion Technologist, Senior Corrosion Technologist, Protective Coating Technologist, and Protective Coating Specialist. See the Certification at a Glance Section for more details. Q: If I choose the Parallel Path option, do I still need to meet the work requirements? A: Yes, all work requirements must be met for each certification. Q: How is work experience documented? A: Special reference forms are included with your application. Q: Can I use work documentation that I previously turned in? A: Yes, if this documentation is used within one (1) year. Q: What is the difference between “acceptable work experience” and “acceptable work experience in responsible charge?” A: “Acceptable work experience” and “acceptable work experience in responsible charge” both refer to documented work experience in the field of corrosion which includes: (a) the investigation of corrosion causes and mechanisms, (b) the investigation, design, and implementation of corrosion control procedures, or (c) the teaching of corrosion related science. However, “acceptable work experience in responsible charge” should be at a level of responsibility requiring initiative, technical ability, and independent judgment. Q: Are there any alternatives to actual “work experience” or “work experience in responsible charge?” A: There are no alternatives to “work experience” or “work experience in responsible charge.” Q: Once I have successfully completed a course, how long do I have to apply it towards a certification? A: You have five (5) years to apply a course towards certification. Q: Are there any time constraints to completion of your certification by exam? A: You have one (1) year from the time when your application is approved in which to take the examination. Q: What is the NACE International Attestation? A: This is a document that attests to your knowledge that you understand the privileges and responsibilities which come along with NACE International Certification. By signing the Attestation, you agree to adhere to certain standards and abide by certain work ethics. Failure to comply could result in disciplinary action. Q: Do I have to renew my certification? A: Yes, all certifications renew every three (3) years. Go to the NACE Web site to renew online at www.nace.org. Q: Do I have to pay a fee to renew my certification? A: Yes, every three (3) years you pay a fee to renew your certification—$140 for Members and $350 for Nonmembers. You no longer have to pay Annual Maintenance Fees for your certification. Q: How long can my file remain open after I have submitted my application paperwork? A: Files remain open for two years with no activity. Files older than two years with no activity will be closed. Q: What happens if I do not renew my certification? A: NACE allows a three month grace period (90 days) after your certification expiration date before your record is marked as “inactive”. You have up to five years to reinstate your certification and pay all fees in arrears. Any certification lapsed for more than five years will NOT be able to be reinstated and will require starting the program over from the beginning.

2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

Administrative Information Class Registration

To qualify for Advance Member or Advance Nonmember fees, a completed registration form with payment must be received at NACE 35 days prior to the class date. Class registration fees include student manuals, course materials, refreshment breaks, and reference books where indicated. Attendees are responsible for their own expenses, including, but not limited to, hotel, airfare, and meals. Participants are responsible for making their own accommodation arrangements directly with the hotel. NACE regrets that it cannot be responsible for any loss or damages incurred as a result of cancellation of a course by NACE for any reason.

Fee Payments

All software license, class, and exam registration fees must be paid in U.S. dollars. For classes outside of North America, fees in local currencies may apply. Contact NACE Headquarters or the stated local contact before making final plans. For class or exam registrations, advance registration accompanied by full fee payment is required to guarantee a seat. Payment in full is due at the time of enrollment. Please do not ask to be invoiced. A confirmation letter will be mailed when payment is received with completed registration forms.

Program fees are subject to change without advance notice. Cancellation and Refund Policy

For classes in Canada and the U.S., paid or guaranteed registrations cancelled in writing at least 35 calendar days in advance of a class will receive a full refund, less a $50 service fee. Paid or guaranteed registrations cancelled in writing 34 to 3 days before a class will receive a refund of 50% of the registration fee. No refunds or credit will be issued on cancellation requests received less than 3 days before a class begins. Based upon availability, transfer to another class is permitted one time, with the following fees: 35 or more days in advance of the start date, the fee is $35; 34-3 days before the start date, the fee is $100. Transfers may not be made less than 3 days before a class begins. All requests for transfer or cancellation must be submitted in writing. Exam Only fees and Exam Only Retake Fees are nonrefundable. For some classes outside Canada and the U.S., contact the training sponsor that is listed.**

Software Returns

The CIP DVD Sets 1 and 2, the Basic Corrosion Course on CD, and the OQ Manual on CD are licensed as final sale items. No returns are accepted on these products with the exception of defective merchandise.

Software Shipping

Purchaser pays actual shipping costs in addition to the license fee. For faster processing of your order, use a credit card for payment, or contact NACE FirstService at +1 800-797-6223 for a shipping quote.

Equal Opportunity

It is the policy and practice of NACE to assure that no person will be discriminated against or be denied the benefits of any activity or program on the basis of the individual’s race, color, religious creed, sex, marital status, national origin, ancestry, sexual orientation, or disability.

Continuing Education Units (CEUs)

Course participants may receive CEUs. Refer to the description of each course on the NACE Web site (www.nace.org/education) for information on CEU credits.

Membership

A one-year membership is included in the Nonmember course Fee, regardless of your membership status at the time of course registration. If you are a member at the time of registration but pay the Nonmember Fee, your membership will be extended for one year. This membership offer is only valid at the time you complete this form. Membership will be processed upon completion of the course, determination of eligibility, and once all payments have been processed. This $130 value includes a $12 subscription to Materials Performance magazine. If you do not wish to take advantage of the one-year membership and subscription to Materials Performance, then you must check the box marked “No” on the course registration form.

Registration & Licensing Fees for CDs and DVDs Registration and license fees are subject to change without notice. **NOTE: (1) NACE-approved Training Sponsors outside of the U.S. may have fees that vary from the fees listed above, based upon regional economics and fees for similar technical courses in their respective regions. (2) Registration fees for Canadian courses have been adjusted to include GST/HST as applicable.

58 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

NACE Course Registration Form NACE Member Number

–

Nonmember

NOTE: NACE-approved Training Sponsors outside of the U.S. and Canada may have fees that vary, based on regional economics, fees, and applicable taxes for similar technical courses in the region. Visit www.nace.org for the most up-to-date course information.

Surname (last), Given (first) Company Shipping Address (no PO boxes, please)—Please enter mailing address below. City State/Province

ZIP/Postal Code

Country

Mailing Address (if different than above)—Include city, state/province, and ZIP/postal code. Business Phone

Business Fax

E-mail Address Americans with Disabilities Act (ADA) State—NACE International is committed to providing reasonable accommodations for students with disabilities upon request of the student (in a timely fashion) and upon verification of disability. Please contact NACE FirstService at 1 800/797-6223 (U.S. & Canada) or +1 281/228-6223 (worldwide) at least 30 days prior to the class or exam being attended. Course Registration Please note: Dates and locations may change without notice. For courses held in Canada, please add required sales tax to base course fee. Code

Class:

Location/date

Fee

Code

Class:

Location/date

Fee

Code

Class:

Location/date

Fee Tax (add applicable tax for courses held in Canada) Total

Payment Option—for classes in the U.S. and Canada Payment should be made by check, money order, or credit card in U.S. funds made payable to NACE. Prepayment is required for all courses; nominations cannot be accepted. To ensure proper NACE member discounts, NACE members should provide their membership number above. Confirmation will be sent when payment is received with your completed registration form. h Check/money order enclosed: $_________________ U.S. h Credit card:

h MasterCard h Discover

h VISA

h American Express

Account No.:_______________________________________________ Exp. date:_ ___________________ Names as it appears on card:_ ________________________________________________________________ Signature:_ ___________________________________________________________________________

PO Box 41027 Houston, TX 77241-1027 USA Phone: +1 281/228-6285 • Fax: +1 281/228-6329 E-mail: firstservice@nace.org Online: www.nace.org

2011 Training & Certification Guide

*ATTENTION: A one-year NACE International membership is included in the Nonmember Fee for this course. If you are a member at the time of course registration, but pay the Nonmember Fee, your membership will be extended for one year. This $130 value includes a Materials Performance magazine subscription. This membership offer is only valid at the time you complete this form. ____NO, I do not want the one-year membership and subscription.

For an updated schedule of courses, visit www.nace.org

Registration & Licensing Fees Coating Inspector Program (CIP) Advance Registration Fees

Standard Registration Fees

Course

Member

Nonmember

Member

Nonmember

CIP Level 1

$1,685

$1,860

$1,835

$1,995

CIP Level 1 Exam Course

$1,335

$1,470

$1,485

$1,605

CIP Level 2

$1,685

$1,860

$1,835

$1,995

CIP Level 2 Exam Course

$1,335

$1,470

$1,485

$1,605

CIP Level 2, Maritime Emphasis

$1,685

$1,860

$1,835

$1,995

CIP Level 3 Peer Review

$875

$1,050

$1,060

$1,245

Nuclear Power Plant Training for Coating Inspectors

$1,575

$1,995

$1,725

$2,145

CIP One Day Bridge Course

$310

$435

$385

$475

CATHODIC PROTECTION PROGRAM Cathodic Protection Program Advance Registration Fees

Standard Registration Fees

Course

Member

Nonmember

Member

Nonmember

CP 1-Cathodic Protection Tester

$1,495

$1,670

$1,645

$1,820

CP 2-Cathodic Protection Technician

$1,495

$1,670

$1,645

$1,820

CP 3-Cathodic Protection Technologist

$1,310

$1,485

$1,460

$1,635

CP 4-Cathodic Protection Specialist

$1,310

$1,485

$1,460

$1,635

CP Exam Only Options CP 1-Cathodic Protection Tester Exam Only

$655

$805

CP 2-Cathodic Protection Technician Exam Only

$655

$805

CP 3-Cathodic Protection Technologist Exam Only

$655

$805

CP 4-Cathodic Protection Specialist Exam Only

$655

$805

CP Interference

$1,310

$1,485

$1,460

$1,635

CP 2-Cathodic Protection Technician–Maritime

$1,495

$1,670

$1,645

$1,820

Offshore Corrosion Assessment Training (O-CAT)

$1,395

$1,570

$1,545

$1,720

Shipboard Corrosion Assessment Training (S-CAT)

$1,100

$1,275

$1,250

$1,425

Nonmember

Member

Nonmember

Other CP Courses

Corrosion Assessment Training

PIPELINES Advance Registration Fees Course

NACE Operator Qualification (OQ) Program

Member

Standard Registration Fees

See page 40 for detailed pricing info

PCIM–Management

$1,550

$1,695

$1,700

$1,845

Internal Corrosion for Pipelines – Basic

$1,660

$1,835

$1,810

$1,995

Internal Corrosion for Pipelines – Advanced

$1,660

$1,835

$1,810

$1,995

Internal Corrosion for Pipelines– Basic (Exam Only Option)

$655

$805

Internal Corrosion for Pipelines– Advanced (Exam Only Option)

$655

$805

GENERAL EDUCATION Advance Registration Fees Course

Standard Registration Fees

Member

Nonmember

Member

Nonmember

Basic Corrosion

$975

$1,175

$1,150

$1,325

Coatings in Conjunction with Cathodic Protection

$1,495

$1,670

$1,645

$1,820

Corrosion Control in The Refining Industry

$1,710

$1,885

$1,860

$2,035

Designing for Corrosion Control

$975

$1,175

$1,150

$1,325

CD-ROMS Item #

Member

Nonmember

Basic Corrosion—Single User License-Includes 1 Basic Corrosion Study Manual

48350-01

$925

$1,100

Basic Corrosion—Five User License-Includes 5 Basic Corrosion Study Manuals

48350-05

$2,925

$3,435

CIP CD-ROM Set 1—Single User License (Multiple version available upon request)

44100

$390

CIP CD-ROM Set 2—Single User License (Multiple version available upon request)

44200

$390

Registration and license fees are subject to change without notice. For all courses held outside of the United States, please see note at the bottom of the page. To take advantage of the advance registration savings, registration form and payment must be received at NACE Headquarters 35 days prior to start date of course.

60 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule Please note course dates and locations are subject to change without notice. For the most updated course schedule and information, visit www.nace.org/eduschedule. NACE regrets that it cannot be responsible for any loss or damages incurred as a result of cancellation of a course for any reason. This includes, but is not limited to, airfare penalties. It may be advisable to check the status of a course before making any nonrefundable travel arrangements. To register for one of the following courses, go online to www.nace.org, or contact NACE FirstService, at +1 281-228-6223 unless otherwise indicated by a footnote. Please note published pricing may not apply to courses held outside the U.S. Contact the Training Sponsor for pricing on courses held outside the U.S. (See footnotes for contact information). Regular course hours are subject to change without notice. Refer to your registration confirmation letter for the start/end dates and times for your chosen course. Footnotes are located on pages 69 & 70. Dates

Location

Code

Note

CIP Level 1

Abu Dhabi, UAE

42411082

Jan 16-21, 2011

Houston, TX

42411160

Jan 17-22, 2011

Vadodara, India

42411102

Jan 20-25, 2011

Imari, Japan

42411128

Jan 23-28, 2011

Houston, TX

42411047

Jan 23-28, 2011

Solbiate Olona, Italy

42411121

Jan 24-29, 2011

Mumbai, India

42411103

Jan 30- Feb 4, 2011

Houston, TX

42411048

Jan 30- Feb 4, 2011

Mobile, AL

42411161

Feb 5-10, 2011

Al-Khobar, Saudi Arabia

42411141

Feb 5-10, 2011

Muscat, Oman

42411149

Feb 6-11, 2011

Houston, TX

42411049

Feb 7-12, 2011

Cape Town, South Africa

42411115

Feb 7-12, 2011

Harrogate, UK

42411117

Feb 7-12, 2011

Lima, Peru

42411157

Feb 14-19, 2011

Chennai, India

42411136

Feb 14-19, 2011

Houston, TX

42411152

Feb 21-26, 2011

Aberdeen, Scotland

42411151

Jan 8-13, 2011

2011 Training & Certification Guide

Dates

Location

Code

Note

Feb 21-26, 2011

Kuala Lumpur, Malaysia

42411174

Feb 21-26, 2011

Melbourne, Australia

42411175

Feb 23-28, 2011

Uraga, Japan

42411129

Feb 27- Mar 4, 2011

Houston, TX

42411052

Mar 6-11, 2011

Houston, TX

42411053

Mar 6-11, 2011

Edmonton, AB Canada

42411134

Mar 7-12, 2011

Singapore

42411176

Mar 7-12, 2011

Gladestone, Australia

42411176

Mar 14-19, 2011

Chennai, India

42411137

Mar 20-25, 2011

Houston, TX

42411054

Mar 20-25, 2011

Dubai, UAE

42411083

Mar 21-26, 2011

Beijing, China

42411171

Mar 23-28, 2011

Nagasaki, Japan

42411184

Mar 27-Apr 1, 2011

Houston, TX

42411153

Mar 27-Apr 1, 2011

Shanghai, China

42411164

Apr 3-8, 2011

Houston, TX

42411055

Apr 3-8, 2011

St. Louis, MO

42411095

Apr 3-8, 2011

Vallejo, CA

42411100

Apr 3-8, 2011

Anaheim, CA

42411111

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) Dates

Location

Code

Note

Apr 3-8, 2011

Waipahu, HI

42411150

Shanghai, China

42411165

Apr 4-9, 2011

Newcastleupon-Tyne, UK

42411119

Jun 13-18, 2011

Cuernavaca, Mexico

42411132

Apr 4-9, 2011

Bogota, Colombia

42411124

Jun 19-24, 2011

Houston, TX

42411155

Apr 4-9, 2011

Sydney, Australia

Jun 20-25, 2011

Houston, TX

42411159

42411178

Jun 20-25, 2011

Beijing, China

42411172

Apr 4-9, 2011

Bangkok, Thailand

42411179

Jun 20-25, 2011

Auckland, New Zealand

42411182

Apr 16-21, 2011

Al-Khobar, Saudi Arabia

42411142

Jun 22-27, 2011

Uraga, Japan

42411131

Jun 25-30, 2011

Houston, TX

42411061

Apr 17-22, 2011

Houston, TX

42411056

Jun 26-Jul 1, 2011

Houston, TX

42411156

Apr 25-30, 2011

Chennai, India

42411138

Jun 27-Jul 2, 2011

Mumbai, India

42411106

Apr 25-30, 2011

Uraga, Japan

42411143

Jun 27-Jul 2, 2011

Norwich, UK

42411120

May 1-6, 2011

Houston, TX

42411057

Jun 25-30, 2011

Houston, TX

42411061

May 1-6, 2011

Virginia Beach, VA

42411096

Jun 26 - Jul 1, 2011

Houston, TX

42411156

May 2-7, 2011

Kochi, India

42411104

Mumbai, India

42411106

May 2-7, 2011

Perth, Australia

42411180

Jun 27 - Jul 2, 2011

May 8-13, 2011

Houston, TX

42411058

Jun 27 - Jul 2, 2011

Norwich, UK

42411120

May 9-14, 2011

Mumbai, India

42411105

May 9-14, 2011

Rio de Janeiro, Brazil

42411170

May 15-20, 2011

Houston, TX

42411154

May 22-27, 2011

Dubai, UAE

42411084

May 23-28, 2011

Kuala Lampur, Malaysia

42411181

May 26-31, 2011

Imabari, Japan

42411130

Jun 4-9, 2011

Abu Dhabi, UAE

42411085

Jun 5-10, 2011

Houston, TX

42411059

Jun 5-10, 2011

Norfolk, VA

42411144

Jun 6-11, 2011

Houston, TX

42411060

Jun 6-11, 2011

Chennai, India

42411139

Jun 12-17, 2011

Amherst, NY

42411000

62 2011 Training & Certification Guide

Note

Dates

Location

Jun 12-17, 2011

CIP Exam Course 1

Feb 21-23, 2011

Houston, TX

43911008

Mar 28-30, 2011

Daejeon, Korea

43911014

Jun 13-15, 2011

Houston, TX

43911009

Jun 20-22, 2011

Daejeon, Korea

43911015

Jan 9-14, 2011

Concordville, PA

42611080

Jan 15-20, 2011

Fahaheel, Kuwait

42611057

Jan 15-20, 2011

Abu Dhabi, UAE

42611065

Jan 16-21, 2011

Surrey, BC, Canada

42611033

Jan 23-28, 2011

Halifax, NS, Canada

42611071

CIP Level 2

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) Dates

Location

Code

Dates

Location

Code

Note

Jan 30-Feb 4, 2011

Calgary, AB, Canada

42611073

Apr 14-19, 2011

Uraga, Japan

42611107

May 8-13, 2011

Houston, TX

42611045

Jan 30- Feb 4, 2011

St. Louis, MO

42611076

May 8-13, 2011

Virginia Beach, VA

42611079

Jan 31-Feb 5, 2011

Mumbai, India

42611082

May 9-14, 2011

Perth, Australia

42611129

Feb 6-11, 2011

Mobile, AL

42611119

May 16-21, 2011

Mumbia, India

42611083

Feb 12-17, 2011

Al-Khobar, Saudi Arabia

42611114

May 28-Jun 2, 2011

Dubai, UAE

42611067

Feb 12-17, 2011

Muscat, Oman

42611115

May 30-Jun 4, 2011

Kuala Lampur, Malaysia

42611130

Feb 13-18, 2011

Houston, TX

42611042

Feb 14-19, 2011

Lima, Peru

42611117

Jun 11-16, 2011

Abu Dhabi, UAE

42611068

Feb 27- Mar 4, 2011

Montreal, QC, Canada

42611088

Jun 12-17, 2011

Houston, TX

42611046

Jun 13-18, 2011

Chennai, India

42611113

Mar 9-14, 2011

Imari, Japan

42611106

Jun 19-24, 2011

Amherst, NY

42611089

Mar 13-18, 2011

Houston, TX

42611047

Mar 13-18, 2011

Edmonton, AB Canada

Jun 19-24, 2011

Shanghai, China

42611121

42611110

Jun 20-25, 2011

Cuernavaca, Mexico

42611108

Mar 14-19, 2011

Singapore

42611127

Mar 21-26, 2011

Chennai, India

42611112

Jun 27-Jul 2, 2011

Beijing, China

42611125

Mar 26-31, 2011

Dubai, UAE

42611066

Jun 20-25, 2011

Cuernavaca, Mexico

42611108

Mar 28-Apr 2, 2011

Beijing, China

42611124

Jun 27 - Jul 2, 2011

Beijing, China

42611125

Apr 3-8, 2011

Shanghai, China

42611120

CIP Exam Course 2

Apr 4-9, 2011

Newcastleupon-Tyne, UK

42611118

Feb 28-Mar 2, 2011

Houston, TX

44011004

Apr 10-15, 2011

Houston, TX

42611044

Daejeon, Korea

44011008

Apr 10-15, 2011

St. Louis, MO

42611078

Mar 31-Apr 2, 2011

Apr 10-15, 2011

Vallejo, CA

42611081

Jun 20-22, 2011

Houston, TX

44011005

Apr 10-15, 2011

Anaheim, CA

42611090

June 23-25, 2011

Daejeon, Korea

44011009

Apr 10-15, 2011

Waipahu, HI

42611116

Apr 11-16, 2011

Newcastleupon-Tyne, UK

42611096

Jan 14-16, 2011

Concordville, PA

43311047

Jan 21-23, 2011

Houston, TX

43311018

Apr 11-16, 2011

Sydney, Australia

42611128

Jan 28-30, 2011

Halifax, NS, Canada

43311039

2011 Training & Certification Guide

Note

CIP Peer Review

50 29

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) Dates

Location

Code

Feb 4-6, 2011

Calgary, AB, Canada

43311041

Note

Dates

Location

Code

Apr 9, 2011

St. Louis, MO

42511014

May 7, 2011

Virginia Beach, VA

42511010

Houston, TX

42511006

Feb 4-6, 2011

St. Louis, MO

43311043

Feb 11-13, 2011

Mobile, AL

43311062

Jun 11, 2011

Feb 18-20, 2011

Houston, TX

43311021

CIP Level 2, maritime emphasis

Mar 4-6, 2011

Montreal, QC, Canada

43311049

Feb 14-19, 2011

Cape Town, South Africa

42811009

Mar 18-20, 2011

Houston, TX

43311026

Mar 22-27, 2011

Houston, TX

42811004

Mar 18-20, 2011

Edmonton, AB Canada

43311059

Mar 31-Apr 2, 2011

Dubai, UAE

43311037

Apr 4-6, 2011

Lima, Peru

43311061

Apr 15-17, 2011

Houston, TX

43311023

Apr 15-17, 2011

St. Louis, MO

Apr 15-17, 2011

Note

CP1 - Cathodic Protection Tester

Jan 8-13, 2011

Abu Dhabi, UAE

44511030

Feb 6-11, 2011

Rosebush, MI

44511028

Mar 5-10, 2011

Al-Khobar, Saudi Arabia

44511054

43311045

Mar 21-26, 2011

Quito, Ecuador

44511059

Vallejo, CA

43311048

Apr 3-8, 2011

Mobile, AL

44511047

Apr 15-17, 2011

Anaheim, CA

43311051

May 1-6, 2011

Houston, TX

44511019

Apr 15-17, 2011

Newcastleupon-Tyne, UK

43311053

May 2-7, 2011

Lima, Peru

44511058

May 8-13, 2011

Rosebush, MI

44511029

May 13-15, 2011

Houston, TX

43311024

May 15-20, 2011

Tulsa, OK

44511020

May 13-15, 2011

Virginia Beach, VA

43311046

May 15-20, 2011

Claysville, PA

44511037

Jun 2-4, 2011

Dubai, UAE

43311038

May 15-20, 2011

Kilgore, TX

44511048

Jun 17-19, 2011

Houston, TX

43311025

Jun 4-9, 2011

Abu Dhabi, UAE

44511031

Jun 24-26, 2011

Amherst, NY

43311050

Jun 5-10, 2011

Downey, CA

44511042

Jun 2-4, 2011

Dubai, UAE

43311038

Jun 17-19, 2011

Houston, TX

43311025

Jun 6-11, 2011

Cuernavaca, Mexico

44511049

Jun 24-26, 2011

Amherst, NY

43311050

CIP 1 Day Bridge Course

CP2 - Cathodic Protection Technician

Jan 15-20, 2011

Abu Dhabi, UAE

44811024

35 37

Feb 12, 2011

Houston, TX

42511004

Mar 12, 2011

Houston, TX

42511007

Jan 22-27, 2011

Fahaheel, Kuwait

44811021

Mar 12, 2011

Edmonton, AB Canada

42511012

Feb 13-18, 2011

Rosebush, MI

44811023

Apr 9, 2011

Houston, TX

42511005

Feb 20-25, 2011

Houston, TX

44811011

Feb 20-25, 2011

Bethlehem, PA

44811029

64 2011 Training & Certification Guide

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) Dates

Location

Code

Note

Dates

Location

Feb 20-25, 2011

Phoenix, AZ

44811030

CP4 - Cathodic Protection Specialist

Mar 7-12, 2011

Las Vegas, NV

44811019

San Bernardino, CA

45111002

Mar 12-17, 2011

Al-Khobar, Saudi Arabia

Jan 30-Feb 4, 2011

44811041

Mar 20-25, 2011

Houston, TX

45111005

Apr 4-9, 2011

Bogota, Colombia

44811033

Apr 9-14, 2011

Al-Khobar, Saudi Arabia

45111012

Apr 10-15, 2011

Mobile, AL

44811034

Apr 23-28, 2011

45111007

Apr 18-23, 2011

Beijing, China

44811043

Fahaheel, Kuwait

May 8-13, 2011

Houston, TX

44811012

May 22-27, 2011

Houston, TX

45111006

May 9-14, 2011

Lima, Peru

44811042

Jun 13-18, 2011

Beijing, China

45111013

May 22-27, 2011

Tulsa, OK

44811013

Jun 25-30, 2011

Abu Dhabi, UAE

45111008

May 22-27, 2011

Claysville, PA

44811028

CP Interference

May 22-27, 2011

Kilgore, TX

44811035

Jan 23-28, 2011

Houston, TX

45011002

Jun 11-16, 2011

Abu Dhabi, UAE

44811025

Mar 27-Apr 1, 2011

Houston, TX

45011003

Jun 12-17, 2011

Downey, CA

44811031

Jun 19-24, 2011

Downey, CA

45011004

Jun 13-18, 2011

Cuernavaca, Mexico

44811036

Code

Note

CP2 - Cathodic Protection Technicianâ&#x20AC;&#x201C;Maritime

CP3 - Cathodic Protection Technologist

Feb 27-Mar 4, 2011

Houston, TX

44311003

Apr 10-15, 2011

Houston, TX

44311004

Jan 23-28, 2011

San Bernardino, CA

44911002

Offshore Corrosion Assessment Training (O-CAT)

Feb 6-11, 2011

Houston, TX

44911007

Jan 8-12, 2011

Abu Dhabi, UAE

42111012

Feb 20-25, 2011

Billings, MT

44911010

Feb 13-17, 2011

Mobile, AL

42111025

Mar 6-11, 2011

Houston, TX

44911008

Apr 11-15, 2011

Shanghai, China

42111026

Mar 19-24, 2011

Al-Khobar, Saudi Arabia

44911016

Jun 6-10, 2011

Houston, TX

42111008

Apr 16-21, 2011

Fahaheel, Kuwait

44911012

Shipboard Corrosion Assessment Training (SCAT)

May 15-20, 2011

Houston, TX

44911009

May 16-21, 2011

Beijing, China

44911017

Jun 18-23, 2011

Abu Dhabi, UAE

Jun 18-23, 2011

Abu Dhabi, UAE

2011 Training & Certification Guide

Jan 15-19, 2011

Abu Dhabi, UAE

42111013

Jan 17-21, 2011

Houston, TX

42111007

44911013

Mar 6-10, 2011

Fahaheel, Kuwait

42111011

44911013

May 16-20, 2011

Virginia Beach, VA

42111017

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) Dates

Location

Code

Jun 6-10, 2011

Norfolk, VA

42111024

Jun 13-17, 2011

Houston, TX

42111009

Note

Dates

Location

Code

Designing for Corrosion Control

Jan 8-12, 2011

Abu Dhabi, UAE

40611010

Jan 22-26, 2011

Al-Khobar, Saudi Arabia

40611013

Apr 4-8, 2011

Houston, TX

40611005

Apr 18-22, 2011

Dartmouth, NS, Canada

40611012

May 9-13, 2011

Amarillo, TX

40611008

Basic Corrosion

Jan 16-20, 2011

Abu Dhabi, UAE

40311029

Jan 31-Feb 4, 2011

San Bernardino, CA

40311001

Jan 31-Feb 4, 2011

Edmonton, AB Canada

40311041

Feb 7-11, 2011

Houston, TX

40311011

May 23-27, 2011

London, UK

40611014

Mar 8-12, 2011

Houston, TX

40311014

May 9-13, 2011

Amarillo, TX

40611008

Apr 2-6, 2011

Al-Khobar, Saudi Arabia

40311038

Apr 2-6, 2011

Al-Khobar, Saudi Arabia

40311039

Apr 18-22, 2011

Houston, TX

40311012

May 9-13, 2011

Amarillo, TX

40311024

May 9-13, 2011

Beaumont, TX

40311028

May 16-20, 2011

London, UK

40311044

Jun 4-8, 2011

Abu Dhabi, UAE

40311022

Jun 6-10, 2011

Norfolk, VA

40311040

Jun 26-30, 2011

Houston, TX

40311013

Abu Dhabi, UAE

41411013

Jan 24-28, 2011

Houston, TX

41411008

Jan 31- Feb 4, 2011

Edmonton, AB Canada

41611017

Feb 6-10, 2011

Fahaheel, Kuwait

41411010

May 7-11, 2011

Al-Khobar, Saudi Arabia

41411016

May 9-13, 2011

Amarillo, TX

41411012

Jun 20-24, 2011

Cuernavaca, Mexico

41411015

41611012

46011010

Jan 31 - Feb 4, 2011

Houston, TX

41611005

Amarillo, TX

46011012

Feb 13-17, 2011

Fahaheel, Kuwait

41611010

Houston, TX

46011011

Feb 21-25, 2011

Malvern, AR

41611015

Mar 27-Apr 1, 2011

Houston, TX

May 8-13, 2011 May 22-27, 2011

Corrosion Control in the Refining Industry

Feb-Mar 4, 2011

London, UK

41511017

Mar 21-25, 2011

Houston, TX

41511009

Apr 11-15, 2011

Houston, TX

41511008

66 2011 Training & Certification Guide

Internal Corrosion for Pipelines – Advanced

Abu Dhabi, UAE

46011009

Jan 8-12, 2011

Jan 15-19, 2011

Houston, TX

Internal Corrosion for Pipelines – Basic

Coatings in Conjunction with Cathodic Protection

Jan 30- Feb 4, 2011

Note

Pipeline Corrosion Integrity Management

Feb 7-11, 2011

Houston, TX

46511003

May 16-20, 2011

Houston, TX

46511004

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) NOTES

NOTES

31 This course is being hosted by Corrosion y Proteccion, S.A. de C.V. Register for this course by contacting leticia Munoz by phone: 52-777-1000909 Ext. 2, 52-7771002165 ext.2, 52-55-22717826, 52-555-4310623, or e-mail: leticia@corrosionyproteccion.com.mx or lmg@ corrosionyproteccion.com. Please note fees for hosted courses may differ from the standard course fees in North America. Contact Corrosion y Proteccion for information on course fees, or visit their website at www. corrosionyproteccion.com.

Register for this course through the Edmonton Section by contacting Jason Thomas by phone at 780-242-0399, by fax at 780-416-6440, or by e-mail at jason.thomas@ bakerhughes.com. Please note the Internal Corrosion for Pipelines-Basic course registrations are taken by NACE Headquarters.

19 This course is being sponsored by the NACE United Kingdom Section. Please register for this course by contacting Dr. Paulette Sidky by phone at +44(0) 207460 9408, by fax at 44 207 460 9409, or via email at p.sidky@cmc.ltd.uk. Please note fees for hosted courses may differ from the standard course fees in North America. 23 This course is being hosted by the NACE International Gateway India Section. Register for this course by contacting Tushar Jhaveri, Secretary, NACE International Gateway India Section, email: nace@mtnl.net.in , Tel: +91 22 25797354 Fax: +91 22 66921572 Website: www.naceindia.org. For written correspondence please note the Sectionâ&#x20AC;&#x2122;s mailing address: NACE International Gateway India Section, 305-A, Galleria, Hiranandani Gardens, Powai, Mumbai - 400076, India. Please note fees for hosted courses may differ from the standard course fees in North America. Contact the NACE India Section for information on course fees. 24 This course is being hosted by the NACE Mainland China Section. Register for this course by contacting the NACE Mainland China Section by phone: 8610 823 83572, fax: 8610 823 83183, or e-mail: xiehongjun@ petrochina.com.cn. Fees for hosted courses may differ from the standard course fees in North America. Contact the NACE Mainland China Section for information on course fees. Please note: All courses hosted by the NACE Mainland China Section are held in English and Mandarin languages only. 29 This course is being hosted by the Australasian Corrosion Association Inc., Australia (ACA). Register for this course by contacting ACA by phone: 61 03 9890 4833, fax: 61 03 9890 7866, or e-mail: aca@corrosion.com. au . Please note fees for hosted courses may differ from the standard course fees in North America. Contact the (ACA) for information on course fees.

2011 Training & Certification Guide

32 This course is being hosted by the Asociacion Colombiana de Ingenieros de Corrosion. Register for this course by contacting Judith Chovil by phone: 571-620-6801, fax: 571-620-2827, or e-mail: nacecolombia@etb.net.co. Please note fees for hosted courses may differ from the standard course fees in North America. Contact the Asociacion Colombiana de Ingenieros de Corrosion for information on course. 35 This course is being hosted by the NACE UAE Section. Register for this course by contacting Pradeep Radhakrishna phone: 9714 8813067, fax: 9714 8813068, or e-mail: wgarnet@eim.ae. Please note fees for hosted courses may differ from the standard course fees in North America. Contact the NACE UAE Section for information on course fees. 36 This course is being hosted by Industrial Quality Concepts. Register for this course by contacting Sundaram Baskaran phone: 91-44-42158714, 91-44-42158715, 91-44-24451009, fax: 91-44-42158714, or e-mail iqc. in.org@gmail.com. Please note fees for hosted courses may differ from the standard course fees in North America. Contact Industrial Quality Concepts for information on course fees. 37 This course is being hosted by the NACE Kuwait Section. Register for this course by contacting Abdul Hameed Al-Hashen phone: 965-398-0223, or e-mail: ahashem_kisr@hotmail.com. Please note fees for hosted courses may differ from the standard course fees in North America. Contact NACE Kuwait for information on course fees. 38 This course is being hosted by The Corrosion Institute of Southern Africa. Register for this course by contacting Beverley van Niekerk at phone: 27-11-802-5145 or e-mail: mail@corrosioninstitute.org.za or mcewanjj@icon. co.za. Please note fees for hosted courses may differ from the standard course fees in North America. Please contact The Corrosion Institute of Southern Africa for information on course fees.

For an updated schedule of courses, visit www.nace.org

NACE Training Course Schedule (continued) NOTES

NOTES

39 This course is being hosted by Asociacion Ecuatoriana de Corrosion. Register for this course by phone: 593 9 094629016 or 593-2-2266642, fax: 593-2-2253921, or e-mail: naceecuador@puntonet.ec.

66 This course is being hosted by the NACE Peru Section. Register for this course by contacting Eduardo Avalo or Isidro Huanaca Enriquez by phone: +51-4-453424, fax: +51-2-4247134, or via e-mail at cpofp@terra.com.pe or contabilidad@cathodicprotectionperu.com. Please note fees for hosted courses may differ from standard course fees in North America. Contact the NACE Peru Section for information on course fees.

44 This course is being hosted by the NACE Tokyo Section, http://www.nace-tokyosection.org. Please register for this course by contacting Toyoji Takeuchi at phone: 011-8146-823-1728, or via e-mail: Tyj_Takeuchi@shi.co.jp. Please note: fees for courses outside of North America may differ from the standard NACE course pricing. Please contact the NACE Tokyo Section for more information on course fees. Please note: This course will be conducted in Japanese. 45 This course is in Partnership with the Chinese Society for Corrosion and Protection (CSCP). Register for this course by contacting Ms. Kewei Gao or Ms. Qinjing Zhang at phone: 011-86-10-62332201, or via e-mail: kwgao@yahoo.com or fsxh@ustb.edu.cn. Please note: fees for courses outside of North America may differ from the standard NACE course pricing. Please contact CSCP for more information on course fees. 50 This course is being hosted by United Technologies for Corrosion Prevention (TCI, United Kingdom). Register for this course by contacting TCI by phone: +44 1483 851485, fax: +44 1483 851485, or e-mail: training@tcieu.com. Please note fees for hosted courses may differ from standard course fees in North America. Contact TCI for information on course fees. 51 This course is being hosted by IMC Engineering S.r.l.. Register for this course by contacting IMC Engineering S.r.l. by phone: +39 010 5958119, or e-mail: manuela. malfanti@imc-quorum.com. Please note fees for hosted courses may differ from standard course fees in North America. Contact IMC Engineering S.r.l. for information on course fees. 58 This course is being hosted by Global Suhaimi Company. Register for this course by contacting Nora Al Abdulgader by phone: +966 (3) 857-1953 Extension 3170 or e-mail: nora.hamad@globalsuhaimi.net; Sarah Al Omair by phone: +966 (3) 857-1953 Extension 3171 or e-mail: sarah@globalsuhaimi.net; Amal Al Khesaifi by phone: +966 (3) 857-1953 Extension 3172 or email: amal.saud@globalsuhaimi.net. Please note fees and class schedules for hosted courses may differ from standard course fees and schedules in North America. Contact Global Suhaimi for information on course fees and class schedules.

68 2011 Training & Certification Guide

67 This course is being hosted by SURPLUS Treinamento e Representacoes Ltda. Register for this course by contacting Leonardo Uller by phone: +55-21-2283-5512 or e-mail: treinamento@surplusbr.com or uller@surplusbr. com. Please note fees for hosted courses may differ from standard course fees in North America. Contact SURPLUS Treinamento e Representacoes Ltda. for information on course fees. 68 This course is being hosted by Sea Land Consulting Services. Register for this course by contacting Gary Cheung by phone: +86- 135-7013 3996, +852-2274 7182, or e-mail: gary@sealandconsulting.com. Please note fees for hosted courses may differ from standard course fees in North America. Contact Sea Land Consulting Services for information on course fees. 69 This course is being hosted by the NACE Atlantic Canada Section. Register for this course by contacting Steven Gaudet by phone: 902-468-1401, fax: 902-4681403 or e-mail: steven.gaudet@internationalpaint.com. Please note fees for hosted courses may differ from the standard course fees in North America. Contact the NACE Atlantic Canada Section for information on course fees. 70 This course is being hosted by KOCES - Korea Coatings Experts Society. Register for this course by contacting Sun-Jung Kim by phone: +82-31-621-8811, or e-mail: pekkle486@naver.com. Please note fees for hosted courses may differ from standard course fees in North America. Contact KOCES for information on course fees. 85 This class is being held by Al-jadawel Training Center. Register for this course by contacting Mohamed Juma Al-ghafri. Email: aljadawel2009@gmail.com; Tel: 0096899343688.

For an updated schedule of courses, visit www.nace.org

Is your NACE Certification

current? Top 5 reasons to renew your NACE Certification

1. You worked hard to earn that certification. Why let it lapse? 2. Recertification demonstrates your commitment to your profession and continued mastery of your field. 3. Enjoy more job opportunities and greater earnings potential â&#x20AC;&#x201C; certifications are becoming a preference when making hiring decisions in many organizations. 4. Continue to be included in the NACE certification database used by potential employers. 5. NACE Certifications are the most widely

specified and recognized in the world!

1440 South Creek Drive Houston, TX 77084-4906 Phone: 1 800-797-6223 (US/Canada) +1 281-228-6223 (Worldwide) Fax: +1 281-228-6329 Web: www.nace.org