Cursos

2013

TRAINING &

CERTIFICATION

GUIDE

It’s More Than A Class, It’s A Career.

THE CORROSION SOCIETY

Periodicals Supplement to Material Performance November 2012 Issue

It’s More Than A Class, It’s A Career.

In today’s working environment, continuous learning and professional development are required to stay competitive and abreast of new developments. This is especially so in the field of corrosion, an industry that is based around technology and innovation.

Continued education through NACE is an investment in your career that offers many tangible benefits.

A NACE course can launch a new career, broaden your area of expertise or be used as a refresher for any one element of your work. It can demonstrate your commitment to your profession, show continued mastery of your field and offer greater recognition and credibility from your peers, within your company or in today’s competitive job market.

NACE is your place to turn to in achieving your career goals. Our courses are designed for continued, career long professional development and may be taken as stand-alone training or as part of the path toward achieving certification. NACE credentials are the ultimate proof of competence in the corrosion industry and we look forward to seeing you in a career-building class this year.

Table of Contents General Education Courses

Basic Corrosion..............................................................................3 Basic Corrosion on CD..................................................................3 Corrosion Control in the Refining Industry................................4 Designing for Corrosion Control..................................................4 Offshore Corrosion Assessment Training (O-CAT).............5, 35 Corrosion in the Water and Wastewater Industry.............5, 36

Coating Inspector Program (CIP)

CIP Level 1.......................................................................................7 CIP Level 2.......................................................................................7 CIP Level 3 Peer Review...............................................................8 CIP Exam Courses CIP Level 1 Exam Course..........................................................9 CIP Level 2 Exam Course..........................................................9 CIP Specialty Courses CIP Level 2, Maritime Emphasis......................................10, 35 Nuclear Power Plant Training for Coating Inspectors......11 CIP One-Day Bridge Course...................................................12

General Coatings Courses

Pipeline Coating Applicator Training........................................14 Coatings in Conjunction with Cathodic Protection..........14, 26 Coating Inspector Program (CIP)..........................................7, 14 Shipboard Corrosion Assessment Training (S-CAT)........15, 35

Protective Coatings Specialist Program PCS 1 Basic Principles................................................................15 PCS 2 Advanced...........................................................................16 PCS 3 Management.....................................................................16 I.C.I. Online—Intro to Coating Inspection..........................17, 37

Cathodic Protection (CP) Program

CP 1—Cathodic Protection Tester............................................19 CP 2—Cathodic Protection Technician...................................20 CP 3—Cathodic Protection Technologist................................21 CP 4—Cathodic Protection Specialist.....................................22 CP Exam-Only Option CP 1—Cathodic Protection Tester Exam-Only....................23 CP 2—Cathodic Protection Technician Exam-Only...........23 CP 3—Cathodic Protection Technologist Exam-Only........24 CP 4—Cathodic Protection Specialist Exam-Only.............24

Pipeline Industry Programs

NACE Operator Qualification Program (OQ)......................29, 36 Pipeline Coating Applicator Training..................................14, 29 Cathodic Protection (CP) Program......................................18, 29 Internal Corrosion Program Internal Corrosion for Pipelines—Basic.............................30 Internal Corrosion for Pipelines—Advanced.....................30 Internal Corrosion Exam-Only Option Internal Corrosion for Pipelines—Basic Exam-Only.........31 Internal Corrosion for Pipelines—Advanced Exam-Only.....31 Internal Corrosion Specialist Certification....................31, 53 Pipeline Corrosion Integrity Management Program Pipeline Corrosion Assessment Field Techniques (P-CAFT)..............................................32 In-Line Inspection.................................................................32 Direct Assessment................................................................33 Pipeline Corrosion Integrity Management (PCIM)..........34

Marine Industry Courses

CIP 2, Maritime Emphasis.....................................................10, 35 CP 2–Cathodic Protection Technician-Maritime..............25, 35 Offshore Corrosion Assessment Training (O-CAT).............5, 35 Shipboard Corrosion Assessment Training (S-CAT)........15, 35

Online, Self-Study Training

I.C.I. Online—Intro to Coating Inspection..........................17, 37 NACE Operator Qualification Program (OQ)......................29, 36 Corrosion in the Water and Wastewater Industry.............5, 36

On-Site Training

Information....................................................................................28

Certification

Certification Paths and Requirements.....................................39 Renewing Your Certification......................................................48 Frequently Asked Questions......................................................49

Administrative Information

Course Registration Fees...........................................................50 Important Information.................................................................51 How to Register for a NACE Course.........................................52

CP Specialty Courses CP 2—Cathodic Protection Technician-Maritime........25, 35 Coatings in Conjunction with Cathodic Protection............26 CP Interference........................................................................26

www.nace.org/education

11

GENERAL EDUCATION

G E N E R A L E D U C AT I O N NACE offers a variety of learning opportunities that can lead to career advancement through enhancing your skills and knowledge related to on-the-job performance. These courses have been designed to train a wide range of students, including management, engineers, field personnel, and sales professionals, regardless of the individual’s experience level.

Our courses have been developed and refined by subject matter experts with decades of knowledge and expertise. Courses vary in length from week-long intensive study to one-day specialty courses.

For students who are new to the field of corrosion, the Basic Corrosion course provides a solid foundation toward a comprehensive career in corrosion. The course serves as an entry point to other NACE courses and certifications allowing the student a path for continued career-long professional development that can open the doors to more job opportunities and greater earnings potential.

2

www.nace.org/education

GENERAL EDUCATION Basic Corrosion 5-Day Classroom Course 1st to 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to 2 p.m., unless otherwise noted Parallel Path to Certification for • Corrosion Technician • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Description The Basic Corrosion course focuses on corrosion and the potential problems caused by corrosion. It covers a basic but thorough review of causes of corrosion and the methods by which corrosion is identified, monitored, and controlled. Active participation is encouraged through hands-on experiments and case studies, as well as an open discussion format.

The course concludes with a written examination at the end of the week.

Who Should Attend Anyone who needs the ability to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility. This includes: • Anyone desiring a basic understanding of corrosion • Technicians • Salespersons • Inspectors • Managers • Engineers Prerequisites Previous training in corrosion control is not required to take this course. However, a basic understanding of science and chemistry is recommended to gain the most value from this course.

Course Highlights (including but not limited to) • The forms of corrosion, how to recognize each form and the specific mechanisms that results in each form • Electrochemical processes and concepts • Corrosive characteristics of commonly-encountered environments • Engineering materials and their relationship to corrosion control • Corrosion control by design, materials, modification of environment, cathodic and anodic protection and protective coatings • Corrosion testing and monitoring using inspection, specimen exposure, electrochemical methods, water chemistry and analysis of deposits Fees Advanced Registration Member—$1,025

Nonmember—$1,230

Standard Registration Member—$1,210

Nonmember—$1,395

www.nace.org/education

Reference Materials Included with Course Registration Fees Student receive the following materials on site: • Student study manual • Corrosion Basics—An Introduction, Second Edition 3.6 CEUs

Basic Corrosion Course on CD A Self-Paced, Home-Study Format Description The Basic Corrosion course on CD contains the same technical content as the classroom course and is presented in a user-friendly, self-study format. To successfully complete the self-study version of Basic Corrosion, you must pass a written examination within six months of receiving the CD. The exam is a proctored test that must be taken in person with a NACE-approved proctor. To meet this requirement, NACE has provided three easy options from which to choose. Option 1: Take the exam in your geographic area under the supervision of an approved NACE proctor. Option 2: Take the exam at NACE’s Training Center in Houston, Texas. Option 3: Take the exam at any scheduled class on the final day of the course. (Go to www.nace.org for an updated course schedule) Please make arrangements in advance to take the exam through NACE on your desired test date. Once you have passed the exam, you will receive your certificate of course completion by mail.

System Requirements for CD • Operating System: Windows Operating System required • Processor: Pentium (or equivalent) with 12 MB of RAM • Memory: 300 MB hard disk space (80 MB for minimum installation) • Hardware: CD-ROM drive, video card, Super VGA monitor Fees Single User License Member—$975 Nonmember—$1,155 5-User License Member—$3,075 Nonmember—$3,610 Reference Materials Included with CD Purchase The following materials are included with the Basic Corrosion CD: • Instruction booklet • Student study manual • Corrosion Basics—An Introduction, Second Edition

3

GENERAL EDUCATION Corrosion Control in the Refining Industry 5-Day Classroom Course 1st-4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted Description The Corrosion Control in the Refining Industry course provides an overview of refinery process units and specific process descriptions. It also focuses on the examination and identification of metallurgical problems that occur in process units. Students receive a complimentary one year subscription to the most recent version of REFIN•COR, which is an online software database of experiences, problems, and solutions encountered by refining industry corrosion engineers and includes minutes of meetings of NACE Committee TEG 205X (formerly T-8) on Refining Industry Corrosion from the inception. This is information which can be used on-the-job and cannot be found anywhere else.

Who Should Attend This course is geared toward those with a minimum of 1-2 years of experience in refineries including: design engineers, process engineers, procurement agents, and maintenance planners, service company representatives who support refineries, corrosion and equipment engineers, metallurgists, inspectors, and inspection supervisors.

Prerequisites No prior training is required, but 1-2 years of work experience is recommended.

Course Highlights (including but not limited to) • Refinery operations and its interactions with corrosion • Materials of construction for refinery applications • Refinery units/processes—corrosion and other failures, crude distillation/desalting, fluid catalytic cracking unit, cracked light ends recovery units, hydrofluoric acid alkylation units, sulfuric acid alkylation units, hydroprocessing units, catalytic reforming, delayed coking units, amine units, and sulfur recovery units • Corrosion monitoring methods in refineries • Refinery injection systems • Process additives • Failure analysis in refineries Fees Advanced Registration Member—$1,795 Nonmember—$1,980 Standard Registration Member—$1,955 Nonmember—$2,140

Designing for Corrosion Control 5-Day Classroom Course 1st-4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted Description Parallel Path to The Designing for Corrosion Control Certification for course reviews the principles of cor• Senior Corrosion rosion and corrosion control and proTechnologist vides a systematic method for applying See page 47 for the technology of corrosion prevention details. to the design process. It offers an overview of the steps involved in materials selection common to many industries. It also covers corrosion control in system design and the financial principles used in evaluating alternative materials and designs. The course concludes with a written exam at the end of the week.

Who Should Attend Anyone who has a technical corrosion background but is new to design including: civil, mechanical, design, and process engineers, consultants, contractors, and architects.

Prerequisites No prior training is required. However, for those with a limited corrosion background, the NACE Basic Corrosion course is recommended prior to taking this course.

Course Highlights (including but not limited to) • Corrosion control and its importance in the design process • Matching materials performance to service environments • Materials selection (process, methodologies, and factors influencing materials selection) • Effects of corrosion and design on materials • Optimization of design • Economic considerations and analysis Fees Advanced Registration Member—$1,025 Nonmember—$1,230 Standard Registration Member—$1,210 Nonmember—$1,395 Reference Material Included with Course Registration Fees Students receive the following guide on-site: • Fundamentals of Designing for Corrosion Control: A Corrosion Aid for the Designer • DCC manual for course kit use 3.6 CEUs

Reference Materials Included with Course Registration Fees • Students receive the REFIN•COR software online.

4

www.nace.org/education

GENERAL EDUCATION Offshore Corrosion Assessment Training (O-CAT) 5-Day Classroom Course 1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted Description The Offshore Corrosion Assessment Training course is an intense five-day program addressing the elements of in-service inspection and maintenance planning for fixed offshore structures. The course also focuses on the Bureau for Safety and Environmental Enforcement (BSEE) A-B-C facility evaluation grading system requirements for Level 1 Inspection Reporting. The course concludes with both a written and practical exam.

New ONLINE Course

Corrosion in the Water and Wastewater Industry To learn more about this course, please refer to page 36.

Who Should Attend This course is valuable to anyone involved in corrosion control and integrity management of fixed offshore structures. The curriculum benefits varied levels of personnel, from those with management and planning responsibilities to the field inspectors conducting in-service inspections of the facility. The program is also valuable for offshore platform operations personnel to better understand corrosion prevention systems utilized on offshore structures and their successful implementation.

Prerequisites No prior training is required.

Course Highlights (including but not limited to) • Corrosion and corrosion control • Protective coatings systems • Splash-zone systems • Cathodic protection systems • Regulatory issues • Corrosion prevention maintenance programs • Facility breakdown • Condition grading systems • Assessment standards • Safety • In-service evaluation equipment • Inspection planning • BOEMRE level 1 inspections (abc grading) • Data utilization and maintenance planning Fees Advanced Registration Member—$1,465 Nonmember—$1,650 Standard Registration Member—$1,625 Nonmember—$1,810 Reference Material Included with Course Registration Fees Students receive the following guide on-site: • Offshore Platform Photo Assessment Guide 4.0 CEUs www.nace.org/education

5

COATING INSPECTOR PROGRAM (CIP) The NACE Coating Inspector Program (CIP) has set a single, global standard for inspections in the protective coatings industry since 1983 and is the world’s most recognized and specified coating inspector certification program. Carrying the momentum of over 20,000 certified inspectors representing 119 countries, CIP continues to initiate today’s coatings professionals into the world of corrosion control by protective coatings, inspection of those coatings, and coatings project awareness, resulting in billions of dollars saved by reducing costly mistakes.

CIP Certification Once individuals successfully complete the corresponding course and exam, or pass the Peer Review, they are eligible for the related certifications, listed below. Each certification level allows them to perform different tasks in the field.

NACE Coating Inspector Level 1—Certified With this level of certification, a person is qualified to undertake basic coating inspection of structural steel using nondestructive techniques and instrumentation under the supervision of a NACE Certified Coating Inspector-Level 3.

The person certified at this level has basic knowledge of coating materials and techniques for surface preparation and application on steel substrates.

NACE Coating Inspector Level 2—Certified With this level of certification, a person is qualified to perform advanced coating inspections using both nondestructive and destructive techniques and instrumentation. The person certified at this level has sufficient knowledge of specialized coating materials and techniques for the surface preparation and application used on a wide variety of substrates. He/she also has ample knowledge in advanced report writing, condition surveys, failure analysis, and refurbishment.

NACE Certified Coating Inspector—Level 3 With this level of certification, a person has demonstrated experience in practical environments to a panel of peers when faced with coatings related scenarios. This individual possesses the knowledge and can perform the tasks of individuals certified at Levels 1 and 2. Furthermore, this certification qualifies a person to supervise individuals who are NACE Coating Inspector Level 1-Certified and NACE Coating Inspector Level 2-Certified.

6

www.nace.org/education

COATING INSPECTOR PROGRAM CIP Level 1 6-Day Classroom Course 1st day: 10 a.m. to 7:30 p.m.

2nd – 5th days: 8 a.m. to 7:30 p.m.

6th day: 8 a.m. to 5 p.m., unless otherwise noted Description CIP Level 1 offers over 60 hours of instruction on the technical and practical fundamentals of coating inspection work for structural steel projects. This course provides students with knowledge of coating materials and techniques for surface preparation and application that prepares the student to perform basic coating inspections using non-destructive techniques and inspection instrumentation.

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

The course is presented in a format of classroom lecture, discussion, group exercises and hands-on, practical labs that teach the student how to perform basic inspection tests. The course concludes with both written and practical exams, as well as an inspector log book evaluation.

Who Should Attend Although specifically designed for coating inspector trainees, this course benefits anyone interested in gaining a better understanding of coatings application and inspection including project engineers, quality assurance managers, contractors, technical sales representatives, blasters, paint applicators, and maintenance personnel.

Prerequisites There are no prerequisites for this course.

Course Highlights (including but not limited to) • Coating types and curing mechanisms • Coating specifications including service environments and coating life cycle • Surface preparation equipment, methods and standards for abrasive blasting, solvent cleaning and power and manual tool cleaning • Coating application by brush, roller, mitt, and conventional and airless spray • Inspection procedures and the role of the inspector including safety, ethics, and conflict prevention and decision making • Testing for environmental or ambient conditions and nonvisible contaminants • Non-destructive test instruments such as wet-film and dry-film thickness gauges and low and high voltage holiday detectors • Surface profile measurement using replica tape and anvil micrometers, surface profile comparators, and digital surface profile gauges • Quality control issues, recognizing design and fabrication www.nace.org/education

defects and coating failure modes • Material Safety Data Sheets (MSDS) and product technical data sheets • Log book and report documentation Recognition Upon successful completion of CIP Level 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.

Fees Advanced Registration Member—$1,770 Nonmember—$1,955 Standard Registration Member—$1,930 Nonmember—$2,095 Reference Material Included with Course Registration Fees Students receive the CIP Level 1 Course Manual on CD prior to the start of course. A printed course manual is provided to students on-site.

5.6 CEUs

CIP Level 2 6-Day Classroom Course 1st day: 10 a.m. to 7:30 p.m.

2nd–5th days: 8 a.m. to 7:30 p.m.

6th day: 8 a.m. to 5 p.m., unless otherwise noted Description CIP Level 2 focuses on advanced inParallel Path to spection techniques and specialized Certification for application methods for both steel • Corrosion and non-steel substrates, including Technologist concrete using both nondestruc• Senior Corrosion tive and destructive techniques.

Technologist The course provides in-depth coverSee pages 46-47 for age of surface preparation, coating details. types, inspection criteria, lab testing, and failure modes for various coatings, including specialized coatings and linings.

The course is presented in a format of classroom lecture, discussion, group exercises and hands-on labs using destructive and nondestructive instruments and test methods. Students will also participate in case studies based on real-life situations and practices of a coatings inspector. The course concludes with both written and practical exams.

Who Should Attend Anyone interested in becoming NACE Coating Inspector Level 2-Certified or increasing his or her coating inspection knowledge should attend this course.

Continued on pg 8.

7

COATING INSPECTOR PROGRAM CIP Level 2 (continued)

CIP Level 3 Peer Review

Prerequisites Successful completion of CIP Level 1 classroom training or CIP Exam Course 1 with a current CIP Level 1 certification is required to register for CIP Level 2.

2-Hour Oral Examination

Course Highlights (including but not limited to) • Advanced corrosion theory with an introduction to cathodic protection when used with coatings • Environmental controls, equipment, and inspection concerns • Advanced environmental testing instrumentation including digital electronic hygrometers, data loggers, and wind speed monitors • Centrifugal blast cleaning and water jetting equipment standards, methods of use, and inspection concerns • Advanced nondestructive test instruments including use and operating parameters for optical and digital microscopes, pH meters, and eddy-current dry film thickness and ultrasonic thickness gauges • Destructive coating inspection equipment such as paint inspection gauges and adhesion and hardness testers • Surface preparation, application and inspection of liquidapplied and thick barrier linings, powder, fireproof, antifouling, high-heat, concrete, pipeline, mainline, and field joint coatings • Specialized application equipment including pluralcomponent, electrostatic and centrifugal, and hot spray systems • Concrete coating techniques, concerns, and test instruments used for inspection • Specialized coating techniques and application of non-liquid coatings including powdered coatings, spray metallizing, hotdip galvanizing, and automated coatings application • Coating survey techniques and procedures and common coating failure modes Recognition Upon successful completion of CIP Level 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.

Fees Advanced Registration Member—$1,770 Nonmember—$1,955 Standard Registration Member—$1,930 Nonmember—$2,095 Reference Material Included with Course Registration Fees Students receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site.

Description CIP Level 3 Peer Review is an intensive, detailed oral examination that is given in front of a three-member review board and lasts approximately two hours. There is no corresponding coursework for CIP Level 3, only an oral assessment. Peer Review examinations are conducted by contemporaries of the coating inspection industry and are experts in their field of work.

Candidates must demonstrate that they can apply the practical and theoretical knowledge of coatings they have learned throughout the CIP Level 1 and Level 2 courses and from experiences faced on the job in real-life situations. The exam questions are selected from a random draw of topics ranging from (but not limited to) standards, procedures, ethics, coatings use, inspection instruments, and specific practical questions that require applicants to use their experience to solve the problem.

The exam is graded on a pass/fail basis.

Who Should Attend Anyone interested in completing his or her CIP training to receive recognition as a NACE Certified Coating Inspector-Level 3. Students must have a current CIP Level 2 certification prior to enrollment.

Prerequisites Students who have successfully completed CIP Level 1 and CIP Level 2 and have two years of verifiable coatings-related work experience may register for the CIP Level 3 Peer Review.

Work experience documentation forms must be submitted to NACE headquarters at least 60 days prior to the start date.

These forms are located in the CIP Student Manuals or may be downloaded from the NACE Web site at www.nace.org. Submit your completed applications via fax to the number on the forms, +1 281-228-6344, or e-mail the signed forms to carol.steele@ nace.org.

Recognition Upon successful completion of CIP Level 3 Peer Review, a person is recognized as a NACE Certified Coating Inspector-Level 3.

Fees Advanced Registration Member—$925 Nonmember—$1,105 Standard Registration Member—$1,120 Nonmember—$1,310

5.6 CEUs

8

www.nace.org/education

CIP EXAM COURSES CIP Exam Course 1 (with purchase of CIP DVD Set 1)

The CIP Exam Course 1 consists of both the CIP DVD Set 1 (purchased separately) and the 3-Day Classroom Course. Successful completion of both are required to achieve certification.

CIP DVD Set 1

Prerequisites No prior training is required; however, prior purchase of CIP DVD Set 1 is required to register for this course. In addition, NACE recommends that all five assessments contained in the DVD set be completed with a grade of 80% or higher before registering for this course.

(Sold separately) Description CIP DVD Set 1 presents the technical content from the NACE CIP Level 1 classroom course in an easy-to-use, self-study format. The course material is presented in PDF format with embedded videos that correspond to the technical content of each chapter. Students can learn at their own pace while at home, in the office, or traveling.

Course Highlights See page 7 for details

Students are required to purchase AND complete the CIP DVD Set 1 before enrolling in the 3-Day Classroom Course.

Standard Registration Member—$1,560 Nonmember—$1,685

System Requirements • Operating system: Windows XP/2000 • Processor: Pentium 4, Speed: 200Mhz • Graphics: 65,000 colors at 800 by 600 resolution • DVD Drive • Sound Card: Windows Compatible • Adobe Acrobat Reader: Version 9.4 or higher

Recognition Upon successful completion of CIP Exam Course 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.

Fees CIP DVD Set 1 Member—$410 Nonmember—$410

(with purchase of CIP DVD Set 2)

Reference Material Included with Course Registration Fees Students receive the CIP Level 1 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students

3-Day Classroom Course 1st – 2nd days: 8 a.m. to 7:30 p.m.

3rd day: 8 a.m. to 5 p.m., unless otherwise noted Description This option completes CIP Level 1 training contained in the CIP DVD Set 1 (prior purchase of DVD required). This three-day short course includes a practical lab at an offsite coatings facility, hands-on training necessary to perform coating inspection work, and team exercises. It concludes with both written and practical exams.

Who Should Attend CIP Exam Course 1 and the CIP DVD Set 1 is designed for coating inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, contractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program. www.nace.org/education

Fees Classroom Advanced Registration Member—$1,405 Nonmember—$1,545

5.6 CEUs

CIP Exam Course 2 The CIP Exam Course 2 consists of both the CIP DVD Set 2 (purchased separately) and the 3-Day Classroom Course. Successful completion of both are required to achieve certification.

CIP DVD Set 2

(Sold separately)

Description CIP Level 2 DVD contains the same technical content presented in the CIP Level 2 classroom course. The course material is presented in PDF format with embedded videos that correspond to the technical content of each chapter. Students can learn at their own pace while at home, in the office, or traveling. Five, ten, fifteen, and twenty user license fees are also available.

Students are required to purchase AND complete the CIP DVD Set 2 before enrolling in the 3-Day Classroom Course.

System Requirements • Operating system: Windows XP/2000 • Processor: Pentium 4, Speed: 200Mhz • Graphics: 65,000 colors at 800 by 600 resolution • DVD Drive • Sound Card: Windows Compatible • Adobe Acrobat Reader: Version 9.4 or higher Continued on pg 10.

9

CIP EXAM COURSES

CIP SPECIALTY COURSES

CIP Exam Course 2 (continued)

CIP Level 2, Maritime Emphasis

Fees CIP DVD Set 2 Member—$410 Nonmember—$410

6-Day Classroom Course 1st day: 10 a.m. to 7:30 p.m.

2nd–5th days: 8 a.m. to 7:30 p.m.

6th day: 8 a.m. to 5 p.m., unless otherwise noted

Reference Material Included with Course Registration Fees Students receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site

3-Day Classroom Course 1st–2nd days: 3rd day:

8 a.m. to 7:30 p.m.

8 a.m. to 5 p.m., unless otherwise noted

Description This option completes the Level 2 training contained in the CIP DVD Set 2 (prior purchase of DVD required). This three-day short course includes hands-on training necessary to perform coating inspection work, team exercises, and concludes with both written and practical exams.

Who Should Attend CIP Exam Course 2 and the CIP DVD Set 2 is designed for coating inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, contractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program.

Prerequisites Successful completion of CIP Level 1 classroom training or CIP Exam Course 1 along with a current CIP Level 1 certification is required to register for this course. Prior purchase of CIP DVD Set 2 is required to register for this course. All material contained in the DVD must be studied prior to course attendance.

Course Highlights See page 7 for details Fees Classroom Advanced Registration Member—$1,405 Nonmember—$1,545 Standard Registration Member—$1,560 Nonmember—$1,685 Recognition Upon successful completion of CIP Exam Course 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.

5.6 CEUs

10

Description CIP Level 2, Maritime Emphasis Parallel Path to highlights the skills and knowledge Certification for required to correctly perform a thor• Corrosion ough coatings inspection aboard Technologist commercial ships in keeping with • Senior Corrosion International Maritime Organization Technologist (IMO) and International Association See pages 46-47 for of Classification Societies (IACS) details. rules. The course includes topics from CIP Level 2 and provides marine personnel with thorough knowledge of surface preparation and protective coatings for vessels, their application, and associated quality control.

The course is presented in a format of classroom lecture and discussion. Students will also participate in hands-on practical labs to learn the different tools and techniques of the inspection equipment. Case studies will also be presented to address actual problems in the marine coating industry. The course concludes with a written and practical exam at the end of the week.

Who Should Attend • Quality control and coating inspectors in the maritime industry • Coating applicators • Asset maintenance managers in shipyards • Ship classification society employees • Coating contractors • Ship owners • Flag administration surveyors Prerequisites Successful completion NACE CIP Level 1 course with current CIP Level 1 certification.

Course Highlights (including but not limited to) • Marine vessel types, major components, and classification societies • Marine-specific corrosion factors affecting performance • Designing and fabricating for corrosion control in a marine environment • Types of marine coatings and linings including liquid and non-liquid, polymeric sheet materials, powder coatings, chemical-resistant brick and tile, and thick barrier and rubber linings • Surface preparation and application of marine coatings • Marine coating defects, defect identification, and failure modes • IACS, CSR, and IMO (PSPC) standards and regulations • Shipyard facilities and processes www.nace.org/education

CIP SPECIALTY COURSES • Antifouling, pipeline and concrete coatings • Safety and environmental considerations, testing, and controls in a marine environment • In-process and in-service inspections • Specifications, pre-job conference, and inspector responsibilities • Quality control processes and instrumentation, both nondestructive and destructive testing • Coatings maintenance, specialized tests and equipment, and inspection criteria Recognition Upon successful completion of CIP Level 2, Maritime Emphasis, a person will be recognized as NACE Coating Inspector Level 2—Marine Certified.

Fees Advanced Registration Member—$1,770

Nonmember—$1,955

Standard Registration Member—$1,930 Nonmember—$2,095 Reference Material Included with Course Registration Fees Students receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site.

5.6 CEUs

Nuclear Power Plant Training for Coating Inspectors 5-Day Classroom Course 1st – 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted Description This course is designed specifically to train CIP-certified coating inspectors to conduct inspections in nuclear power plants (NPPs), as well as to familiarize non CIP-certified personnel with NPP coating requirements. The training focuses on the unique challenges presented by a nuclear facility’s restrictive and safety-critical environment, as well as the verbatim compliance demanded in NPPs. The course also delves deeply into government, industry, and plant-specific regulations, technical specifications, and procedures.

The course is presented in a format of classroom lecture and discussion but does not include inspection tools or equipment.

The course concludes with a written examination.

Who Should Attend • NPP quality assurance managers • Qualified coating inspectors who want to perform inspections in nuclear power plant facilities • Inspection firms—qualified inspectors and managers • Coating manufacturers sales and technical representatives • Coating inspection and evaluation personnel at architectural engineering firms • Coating contractors • Coating evaluation personnel from the Nuclear Regulatory Commission (U.S.) • Paint supervisors at nuclear power plants, who need to understand what coating inspectors look for Prerequisites No prior training is required, but CIP Level 1 certification is strongly recommended.

Course Highlights (including but not limited to) • NPP operations, work procedures, and industry terms • Industry organizations that regulate NPPs and the work done in them • U.S. Code of Federal Regulations (CFR) 10 CFR 50 for Nuclear Power Plants, and NRG Regulatory Guides • Industry and plant-specific ANSI and ASTM standards and how they relate to coating inspections • The purpose, criteria, and types of qualified NPP coatings • Security and safety issues • Unique requirements of work in a nuclear power plant • Surface preparation and application specific to the various service level areas in a nuclear facility • Requirements, methods, and means to conduct inspections inside various areas of a NPP • Coating condition assessment for Coating Service Level I (CSL I) areas Recognition Upon successful completion of the course, students will be recognized with a Nuclear Facilities Certification Supplement (NFCS) on their CIP cards. Students who are not CIP-certified coating inspectors will receive a Certificate of Completion.

Fees Advanced Registration Member—$1,100 Nonmember—$1,285 Standard Registration Member—$1,260 Nonmember—$1,425 Reference Material Included with Course Registration Fees • ASTM Standards • ASTM 2009 Annual Book of Standards, Vols. 06.01 and 06.02; D 5144-08; C177-04; D 92-05a; E 1461-07; E 1530-06; E 337-02 (07); and E 94-09 • ANSI Standards N 101.2-1972; N 101.4-1972; N 5.12-1974; N 45.2.6-1978 3.6 CEUs

www.nace.org/education

11

CIP SPECIALTY COURSES CIP One-Day Bridge Course One-Day Classroom Course 8 a.m. to 5 p.m., unless otherwise noted Description The CIP One-Day Bridge Course provides specialized training related to coating inspection of bridges that meets the training requirements specified by the U.S. Department of Transportation.

The course focuses on coating application of bridges and the role of the inspector in the quality control process, and guides the inspector through a detailed project from start to finish. Students take a written examination at the conclusion of the course.

Who Should Attend • CIP participants seeking to expand their knowledge of bridge coating application and inspection • Quality assurance and control inspectors and contractors • DOT bridge engineers • Asset maintenance managers • Coatings contractors • Inspection companies • Surface preparers • Applicators Prerequisites Successful completion of CIP Level 1 is required to register for this course along with current CIP Level 1 certification or higher.

Course Highlights (including but not limited to) • Bridge nomenclature, bridge member identification numbering system, and industry specific terminology • Bridge types and components for steel, concrete, and wood bridges including superstructure, substructure, decks, and bearings • Overview of hazardous materials and waste containment, environmental protection and monitoring, and safety concerns • Surface preparation including pre-inspection, fabrication defects, blast cleaning, waterjetting, atmospheric environmental exposure, chemical contamination of corroded steel, and inspection for nonvisible contaminants • Coating materials for steel, concrete bridges, and wood bridges and ambient surface and materials condition requirements • Sample specification encompassing construction methods for overcoating or removing coatings from a substrate, including surface pre-cleaning, preparation, and postcleaning requirements for overcoating and full removal Recognition Participants who successfully complete this course receive a bridge endorsement on their CIP cards.

Fees Advanced Registration Member—$375 Nonmember—$510 Standard Registration Member—$455 Nonmember—$550 0.8 CEUs

12

www.nace.org/education

G E N E R A L C O AT I N G S Of the technologies used to control corrosion, protective coatings is one of the most significant. They are used to provide protection for most materials and surface types in most environments. Approximately 90% of all expenditures associated with corrosion control are related to protective coatings. A properly selected and applied coating system can increase the usable lifetime of a material while reducing replacement and maintenance costs.

NACE International provides the means of technical proficiency for the coatings industry through training courses specifically developed for coatings and linings application. Courses are tailored for individuals of all levels of experience—from the beginner to those looking to expand their roles into management or achieve NACE certification. The NACE PCS Training Program is one of the specialized training programs geared towards individuals with various levels of coating experience, from applicators and contractors to engineers and project owners. The courses can be taken in succession; however individuals with more experience can choose which course(s) would benefit them most in their career.

www.nace.org/education

13

GENERAL COATINGS New Course

Pipeline Coating Applicator Training 5-Day Classroom Course 1st - 5th days: 8 a.m. to 5 p.m., unless otherwise noted Description This five-day course will cover the proper coating application procedures including understanding specifications, surface preparation, application techniques, dealing with changing ambient conditions, quality control measures, etc. for the most common coating materials to which contractors and inspectors are exposed to on pipeline projects. Through the use of in-class presentations and videos, followed immediately by hands-on demonstrations in field conditions, students will learn, develop and practice the skills required to properly apply the specified field applied coatings under expected pipeline construction conditions.

• Mainline coating repair, FBE specific • Environmental and professional considerations Fees Advanced Registration Member—$2,795 Nonmember—$2,900 Standard Registration Member—$3,115 Nonmember—$3,285 Reference Material Included with Course Registration Fees Students receive a printed course manual.

4.0 CEUs

Who Should Attend This course is targeted to pipeline coating applicators but will also benefit pipeline inspectors, foremen and supervisors, engineers-in-charge, manufacturer reps, and even experienced coatings personnel.

Prerequisites The following prerequisites are highly recommended, but not required: • High school diploma or GED • Ability to perform basic math calculations (simple algebra, fractions, and conversions) • Ability to lift 40 pounds Course Highlights (including but not limited to) • Introduction to pipelines—their component parts, pipeline types, general pipeline construction methods • Pipeline corrosion and consequences of failure • Mainline (shop applied) coating types and applications • Field joint coating types and application • Pre-job requirements • Surface preparation • Preheating • Quality control • Field joint coating types • Application of cold applied tapes • Application of hot tapes • Application of petrolatum and wax brand tapes • Application of 2 and 3 layer sleeves • Application of liquid epoxy • Pre-insulated pipe coatings • Mainline coating repair, general

14

Coatings in Conjunction with Cathodic Protection To learn more about this course, please refer to page 26.

Coating Inspector Program (CIP) To learn about the courses available within the CIP program, please refer to pages 6-12.

www.nace.org/education

GENERAL COATINGS Shipboard Corrosion Assessment Training (S-CAT) 5-Day Classroom Course 1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted Description The Shipboard Corrosion Assessment Training course provides a foundation of coatings, corrosion, and corrosion control knowledge for assessing the condition of tanks and other military ship structures, while determining the required actions necessary to effectively maintain fully operational status. The course equips the naval assessor with practical guidelines for surveying and evaluating the condition of the protective coating system on specific areas of U.S. Navy vessels.

During the S-CAT course students will use the Shipboard Corrosion Assessment Immersion Tool, the only virtual training environment for corrosion in the marine industry. This training aid allows students to experience a direct simulation of events that occur on military and commercial ships every day. The desired end result is a consistent and orderly process of evaluation that has the confidence of everyone involved in the maintenance cycle.

Who Should Attend • Coating Inspectors • Shipyard Planners • Design Engineers • Type Commander Representatives • Port Engineers Prerequisites Attendees should possess a High School diploma (or GED) and have a minimum of three months experience in the evaluation of corrosion or coatings breakdown on marine vessels.

Course Highlights (including but not limited to) • Visual assessment exercises for all ship areas • Corrosion theory • Corrosion control methods • Cathodic protection overview • Protective coatings and linings overview • Corrosion resistant materials • Safety • Corrosion protection system evaluation • Evaluation tools and equipment including dry film thickness measurement (DFT), tooke gauge and pit gauge • Grading system for U.S. Navy ships (CCIMS) • Marine coating failures • Total tank scoring • Adhesion testing

PCS 1 Basic Principles 3-Day Classroom Course 1st – 3rd days: 8 a.m. to 5 p.m., unless otherwise noted Description This course introduces both the theoretical and practical aspects of using coatings to control corrosion, as well as the economic benefits of managing them. This course defines and examines common corrosion control coatings and addresses when, how, and where they should be used.

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Who Should Attend • Planning, engineering and supervisory level personnel responsible for industrial coatings and linings who are new to the field or position • Specifiers, maintenance and project engineers in all industries • Marketing Representatives of coatings materials or equipment • Unit Managers involved in corrosion Note: Those students who hold a NACE CIP Level-1 certification or similar certification from SSPC or Frosio should plan on treating this course as a complete review of previously covered material.

Prerequisites No prior training is required.

Course Highlights (including but not limited to) • Forms of corrosion, their mechanisms, and effects on safety, costs, appearance and maintenance programs • Techniques of corrosion control and purposes of coatings and linings • Types of coatings: how they are categorized, desirable characteristics, and their components • Selecting coatings and coating systems (single and multiple) • Surface preparation safety, common techniques and equipment • Common application techniques and equipment used for a variety of substrates • Standards used relating to surface preparations and application • Types of reports and developing a specification • Common coating defects and failures Fees Advanced Registration Member—$850

Nonmember—$1,025

Standard Registration Member—$1,005

Nonmember—$1,185

Fees Advanced Registration Member—$1,465 Nonmember—$1,650

Reference Material Included with Course Registration Fees Corrosion Prevention by Protective Coatings, 2nd Edition provided to students on-site

Standard Registration Member—$1,625 Nonmember—$1,810

2.4 CEUs

4.0 CEUs www.nace.org/education

15

GENERAL COATINGS PCS 2 Advanced 3-Day Classroom Course 1st – 3rd days: 8 a.m. to 5 p.m., unless otherwise noted Description PCS 2 Advanced provides advancedlevel technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties, and any unique considerations for their surface preparation, application and inspection. PCS 2 Advanced also delves deeply into testing coating properties and performance, common coating defects, substrates, selecting coating systems, the specification, and surveys and maintenance planning.

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Who Should Attend This course is suitable for planning, engineering, supervisory level or technical personnel who work with protective coatings on a regular basis. The student should be able to learn basic chemistry concepts as they pertain to coatings and corrosion.

Prerequisites No prior training is required, but completion of PCS 1 Basic Principles is recommended.

Course Highlights (including but not limited to) • Uses of coatings and linings, best practices and external factors that influence their use • Chemistry of liquid applied coatings and coating formation chemistry • Difference between organic and inorganic coatings • Coating characteristics including the basic chemistry and unique characteristics that affect surface preparation and application needs • Common test and qualification methods for liquid-applied coatings • Chemistry of non-liquid coatings • Unique application and quality control methods for important non-liquid coatings • Testing coating properties and performance • Coating defects • Substrates (cast iron, steel, stainless steel, concrete and cementitious surfaces, galvanized steel, aluminum), their unique surface preparation needs, and the standards that govern them • Coating system types, system selection goals, objectives, performance requirements, design engineered properties and trade-offs • Understanding coating specifications: —eliminating ambiguity —proper implementation

16

—identifying shortcomings —how departures from it can impact coating life • Understand industry standards and how to use properly in specifications • Coating surveys and maintenance programs Fees Advanced Registration Member—$850

Nonmember—$1,025

Standard Registration Member—$1,005

Nonmember—$1,185

Reference Material Included with Course Registration Fees The Protective Coating User’s Handbook is provided to students on-site 2.4 CEUs

PCS 3 Management 5-Day Classroom Course 1st – 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to 2 p.m., unless otherwise noted.

Description PCS 3 Management will cover all aspects of managing structures with protective coatings and linings. It will cover project design issues, specification development, project management, and maintenance planning.

Who Should Attend The course is directed at students who have passed PCS 2– Advanced or who have equivalent experience. Students should have some basic understanding of finance.

Prerequisites This course is suitable for planning, engineering, or supervisory level personnel who have responsibility for industrial protective coatings and linings. The student should be able to learn management concepts as they pertain to coatings and corrosion.

Students should have a working knowledge of coatings before attempting this course. The course does not cover issues relating to coatings chemistry and technology.

Course Highlights (including but not limited to) • Project management • The specification from a project manager’s point of view • Triangle of constraints • Work breakdown structure • Developing project costs and budget • Time and material estimation • Variation in costs and productivity factors • Schedule development www.nace.org/education

GENERAL COATINGS • • • • • • • • • • • •

Critical path milestones Earned value management Risk mitigation Contracting Project control, execution, tracking and documentation Developing coating maintenance programs (maintenance concepts) Condition forecast mathematics Projecting outyear coating costs Minimizing repair costs Repair vs. replace decisions Computerized coating program maintenance management Coating life cycle cost analysis

Fees Advanced Registration Member—$1,395

Nonmember—$1,605

Standard Registration Member—$1,580

Nonmember—$1,765

3.6 CEUs

New ONLINE Course

I.C.I. Online—Intro to Coating Inspection To learn about the Introduction to Coating Inspection, please refer to page 37.

www.nace.org/education

17

Cathodic Protection Training and Certification The NACE Cathodic Protection Training and Certification Program (CP) is a comprehensive program for professionals in any industry including pipelines and bridges, tanks and well casings, the maritime and offshore industries, coated steel and concrete, and water and wastewater systems. The program is designed to give students a path for continued career-long professional development.

The program is comprised of 7 courses that are designed to train a wide range of students depending on the individual’s experience level. Each CP course is an independent component of the program and has a different skill and education level for entry, taking into account the student’s work experience and math/ science background.

The program includes four certification courses and moves from entry level (CP 1) to the most knowledgeable and experienced specialist level (CP 4). Once students successfully complete the corresponding exam they are eligible to apply for the related certification.

The CP program also offers specialized courses in CP Interference and Coatings in Conjunction with Cathodic Protection, both of which are essential factors for the successful application and execution of cathodic protection. The CP 2 course is also offered as a specialty course specific to the maritime industry.

Whether you want to improve your career path through CP certification or enhance your skills and knowledge related to on-the-job performance through CP training, NACE CP courses ensure the in-depth understanding of cathodic protection that is critical to extending the operating life and integrity of your assets.

18

www.nace.org/education

Cathodic Protection PROGRAM CP 1—Cathodic Protection Tester 6-Day Classroom Course 1st day 1 p.m. to 6:30 p.m.

2nd to 5th days: 8 a.m. to 6:30 p.m.

6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted Description The CP 1–Cathodic Protection Tester course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Tester Certification examination. This course provides theoretical knowledge and practical fundamentals for testing on both galvanic and impressed current CP systems.

Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equipment and instruments for CP testing. The course concludes with an open book written exam and a closed book practical exam.

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Who Should Attend This program benefits anyone responsible for supervising CP systems, measuring the effectiveness of CP systems, and/or recording this data, including CP field personnel and technicians. NACE CP 1—Cathodic Protection Tester Certification is awarded upon successful completion of course.

Prerequisites The following prerequisites are highly recommended, but not required: • High school diploma or GED • Six months of CP work experience • Ability to perform basic math calculations (simple algebra, fractions, and conversions) What You Need to Know to Succeed in This Course Students with little CP experience may be successful in this course if they can grasp scientific concepts, can perform math calculations, and possess an understanding of electrical measurements. Ideally, students should have six months of solid work experience in handling CP instruments under the supervision of an experienced CP Tester or Technician.

If you are not sure if you possess the basic knowledge to pass CP 1, you may walk through the short primer on Ohm’s Law and basic math assessment online.

• Ohm’s Law (www.nace.org) • Math Assessment (www.nace.org)

Course Highlights (including but not limited to) • Basic electricity • Basic chemistry and corrosion fundamentals • CP fundamentals • Field measurements • Stray current identification • Installing CP components • Monitoring CP systems • Recordkeeping • Safety specific to CP • Troubleshooting Skill Assessment Upon successful completion of the examination, a Certified NACE Cathodic Protection Tester will possess (but will not be limited to) the following skills and knowledge factors: • Understand the basics of electricity, electrical laws, electrochemistry, corrosion, and CP theory • An understanding of polarity related to current flow and metal corrosion activity • Conduct tests to identify shorts and continuity tests in CP systems • Use test instruments to perform a variety of field tests such as structure-to-soil potentials, voltage and current measurements, soil resistivity, pipe/cable locating, and rectifier readings • Understand CP components including impressed current systems, galvanic anodes and test stations • Read shunts and understand their use in rectifiers, bonds, and anodes • Perform periodic surveys to confirm the effectiveness of a CP system • Gain knowledge of reference cells, their maintenance, use, and precautions • Learn basic location mapping, report preparation, and recordkeeping • Review safety issues specific to CP • Understanding of code requirements related to CP Fees Advanced Registration Member—$1,570

Nonmember—$1,755

Standard Registration Member—$1,730

Nonmember—$1,915

Reference Materials Included with Course Registration Fees Students receive the CP 1–Cathodic Protection Tester Course Manual on CD prior to the start of the course. A printed course manual, as well as Peabody’s Control of Pipeline Corrosion, is provided to students on-site.

5.0 CEUs

www.nace.org/education

19

Cathodic Protection PROGRAM CP 2—Cathodic Protection Technician 6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m.

2nd to 5th days: 8 a.m. to 6:30 p.m.

6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted Description The CP 2–Cathodic Protection Technician course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Technician Certification examination.

Course topics include intermediate-level discussions of corrosion theory and CP concepts, types of CP systems, AC and DC stray current interference, and advanced field measurement techniques. This course provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current CP systems and to gather design data. Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equipment and instruments for CP testing. The course concludes with an open book written exam and a closed book practical exam.

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Who Should Attend This course is designed for individuals with a working knowledge of CP or possess extensive years of CP field experience with a technical background. Students should complete a preliminary application for certification at least 60 days in advance so that prerequisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balancing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1-Cathodic Protection Tester course, or equivalent; and comprehensive knowledge of electrochemistry, electricity, electrical laws, series and parallel circuits, meter operation, and CP fundamentals.

Prerequisites Students must choose one of the options below and meet all of the prerequisites before registering for the CP 2—Cathodic Protection Technician course.

OPTION 1 • 1 year CP work experience PLUS • 4-year Physical Science or Engineering degree Strongly recommended • CP Tester Certification or equivalent training Option 2 • 2 years CP work experience PLUS

20

• 2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training Strongly recommended • CP Tester Certification or equivalent training Option 3 • 3 years CP work experience PLUS • High school diploma or GED including algebra and logarithms training Strongly recommended • CP Tester Certification or equivalent training Course Highlights (including but not limited to) • Corrosion theory • CP fundamentals • Field measurements and instrumentation • DC power sources • Safety specific to CP • CP recordkeeping Skill Assessment Upon successful completion of the examination and certification application approval, a Certified NACE Cathodic Protection Technician will possess (but will not be limited to) the following skills and knowledge factors: • Perform advanced field tests (including current requirement test, shorted casing test, IR drop test, soil resistivity, and interference tests) and evaluate the results • Perform tests to verify the presence of stray current interference and recommend method(s) to mitigate the interference • Understand AC voltage and its mitigation • Maintenance of documentation and records, including data plotting and analysis • Conduct and understand the importance of periodic surveys, including IR-Free readings, polarization decay tests, and current measurements • Test and troubleshoot rectifier component parts • Understand corrosion coupon test stations • Understand code requirements related to CP Fees Advanced Registration Member—$1,570

Nonmember—$1,755

Standard Registration Member—$1,730

Nonmember—$1,915

Reference Materials Included with Course Registration Fees Students receive the CP 2–Cathodic Protection Technician course manual on CD prior to the start of the course. A printed course manual, as well as Cathodic Protection Survey Procedures by W. Brian Holtsbaum, are provided to students on-site.

5.0 CEUs

www.nace.org/education

Cathodic Protection PROGRAM CP 3—Cathodic Protection Technologist 6-Day Classroom Course 1st day: 10 a.m. to 6:30 p.m.

2nd to 5th days: 8 a.m. to 6:30 p.m.

6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

Description The CP 3–Cathodic Protection Technologist course is an intensive 6-day course presenting CP technology, which prepares students for the NACE Cathodic Protection Technologist Certification examination. The course concludes with an open book written exam and a closed book practical exam.

Who Should Attend This course is designed for individuals with extensive CP field experience and a strong technical background in cathodic protection. Students should complete a preliminary application for certification at least 60 days in advance so prerequisites can be verified.

Prerequisites Students must choose one of the options below and meet all of the prerequisites before registering for the CP 3 – Cathodic Protection Technologist course. A strong algebra background, with thorough understanding of units conversions and scientific notation, is required as a minimum mathematics prerequisite. A basic understanding of trigonometry and geometry is also recommended.

Option 1 • 3 years CP work experience with progressively increasing technical responsibilities PLUS • 4-year Physical Science or Engineering degree Strongly recommended • CP Technician Certification or equivalent training Option 2 • 6 years CP work experience with progressively increasing technical responsibilities PLUS • 2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training Strongly recommended • CP Technician Certification or equivalent training

www.nace.org/education

Option 3 • 8 years CP work experience with progressively increasing technical responsibilities PLUS • High school diploma or GED including algebra and logarithms training Strongly recommended • CP Technician Certification or equivalent training Course Highlights (including but not limited to) • CP theory • CP criteria • CP interference • Detecting stray current, AC interference, and telluric current interference • CP design fundamentals • Design calculations (circuit resistances, system capacity and life, number of anodes, driving voltage) • Evaluation of system performance • Troubleshooting cathodic protection systems Skill Assessment Upon successful completion of the examination and certification application approval, a Certified NACE Cathodic Protection Technologist will possess (but will not be limited to) the following skills and knowledge factors: • Understand activation, concentration, and resistance polarization, and the mathematical expressions of these concepts • Understand the factors that affect polarization (area, temperature, relative movement, ion concentration, oxygen concentration) • Understand the NACE criteria for CP, be able to apply the criteria, and make adjustments as necessary to CP systems in compliance with the criteria defined by the company where the technologist is employed • Understand the concept of current distribution and be able to determine ideal current distribution for a CP system taking into account the factors affecting current distribution (anode-to-cathode separation distance, electrolyte and structure resistivity variation, current attenuation) • Perform advanced cathodic protection testing using correct measurement techniques to monitor CP system performance, and accurately interpret the data collected to ensure optimum CP system performance. Based on data collected, determine if correction/modifications to system components are necessary • Identify errors in data collection/CP measurements including contact resistance errors, voltage drop errors, and reference electrode errors • Conduct and document interference tests to determine if interference exists and identify the source of the interference • Upon determination of interference, identify and implement a method of control that will mitigate the effects of the stray current Continued on pg 22.

21

Cathodic Protection PROGRAM CP 3—Cathodic Protection Technologist (continued) • Design and install simplistic forms of galvanic and impressed current cathodic protection facilities, and perform the necessary mathematical calculations Fees Advanced Registration Member—$1,380

Nonmember—$1,560

Standard Registration Member—$1,535

Nonmember—$1,720

Reference Materials Included with Course Registration Fees Students receive the CP 3–Cathodic Protection Technologist course manual on CD prior to the start of the course. A printed course manual is provided to students on-site.

5.4 CEUs

CP 4—Cathodic Protection Specialist 6-Day Classroom Course 1st day: 1 p.m. to 7:30 p.m.

2nd–5th days: 8 a.m. to 7:30 p.m.

6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted Description The CP 4–Cathodic Protection Specialist course is an intensive 6-day class focusing on the principles and procedures for CP design on a variety of structures for both galvanic and impressed current systems. The course discusses theoretical design concepts, considerations that influence the design (environment, structure type/materials of construction, coatings), design factors, and calculations (including attenuation).

Classroom instruction is comprised of lecture, in-class discussion, and practice with design calculations on various structures (i.e., pipelines, tanks and well casings, offshore applications, and steel reinforcing in concrete structures).

Parallel Path to Certification for • Corrosion Technologist • Senior Corrosion Technologist See pages 46-47 for details.

The course concludes with a written and a problem solving examination. The examination is open book and students are welcome to bring any printed reference material they would like to the examination.

Who Should Attend This course is designed for those individuals having experience in the design, installation, and maintenance of CP systems. Prior

22

to taking the NACE training course or the exam, students must have completed college or university-level courses in algebra, geometry, and trigonometry, and must have significant amounts of practical and field experience in CP design.

IMPORTANT NOTE: The CP Specialist certification is a challenging exam. A direct progression from Cathodic Protection Technologist (CP 3) to Cathodic Protection Specialist (CP 4) does not exist. Participating only in the CP 4–Cathodic Protection Specialist course does not ensure success on the Cathodic Protection Specialist examination. Substantial experience involving all aspects of cathodic protection, including design and formal education in math/science/engineering, is critical to students’ success in the course and examination. Attendance at the Cathodic Protection Technologist and CP Interference courses are highly recommended before taking the CP 4–Cathodic Protection Specialist course or exam-only option.

Prerequisites Students must choose one of the paths below and meet all of the prerequisites before registering for the CP 4—Cathodic Protection Specialist course. A strong background in advanced algebra, trigonometry, and geometry is recommended as a minimum mathematics prerequisite.

Option 1 • 4 years CP work experience in responsible charge PLUS One of the following: • A Bachelor’s degree in Engineering or Physical Science and an advanced degree that required a qualification exam • P.E., P.Eng, or equivalent • EIT registration or equivalent PLUS • CP Technologist Certification or equivalent training Option 2 • 6 years CP work experience, including 4 years in responsible charge PLUS • 4-year Physical Science or Engineering degree PLUS • CP Technologist Certification or equivalent training Option 3 • 12 years CP work experience, including 4 years in responsible charge PLUS • 2 years post-high school training in math or science from an approved technical/trade school including algebra, trigonometry, and logarithms training PLUS • CP Technologist Certification or equivalent training Course Highlights (including but not limited to) • Concept of CP www.nace.org/education

Cathodic Protection PROGRAM • • • •

Factors influencing CP design CP systems Design factors and calculations Design examples for the following structures/environments: —transmission and other pipelines, tanks, and well casings —marine and offshore applications —water tanks, surface condensers, and thickeners —steel reinforcing in concrete structures

Skill Assessment Upon successful completion of the examination and certification application approval, a Certified NACE Cathodic Protection Specialist will possess (but will not be limited to) the following skills and knowledge factors: • Design complete CP systems in a variety of industry applications including water tanks, aboveground and underground storage tanks, and pipelines • Demonstrate knowledge of rectifier and ground bed installation, along with source code calculations and protective coatings • Perform corrosion analysis on the job site • Manage and direct field tests • Apply new technologies to existing CP programs • Provide formal training to understudies on basic and advanced CP concepts • Understand and comply with codes, regulations, reporting procedures, and standard practices Fees Advanced Registration Member—$1,380

Nonmember—$1,560

Standard Registration Member—$1,535

Nonmember—$1,720

Reference Materials Included with Course Registration Fees Students receive the CP 4–Cathodic Protection Specialist Course manual on CD prior to the start of the course. A printed course manual and Handbook of Cathodic Corrosion Protection: Theory and Practice of Electrochemical Protection Processes are provided to students on site.

5.6 CEUs

CP EXAM-ONLY COURSES

CP Exam-Only Options CP 1—Cathodic Protection Tester Exam-Only 4.5-Hour Examination Description Students seeking CP Tester certification and do not take the CP 1-Cathodic Protection Tester course may earn certification through an Exam-Only option. This option consists of a 2.5-hour written examination and a 2-hour hands-on, practical examination, which are the same exams offered in the CP 1 course. Exam-Only candidates receive a CP 1–Cathodic Protection Tester Course Manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 1–Cathodic Protection Tester course offerings.

Prerequisites The following prerequisites are highly recommended, but not required: • High school diploma or GED • Six months of CP work experience • Ability to perform basic math calculations (simple algebra, fractions, and conversions) Exam Only Option Candidates may sit for the CP Tester examination without taking the class. The written exam is open book so that candidates can bring their own printed references; however, the practical exam is closed book. Exam-Only candidates may only attend the course on the day of the exam. Contact NACE FirstService for more information by phone: +1 281-228-6223, or e-mail: FirstService@nace.org. Registration fees for exam only candidates are nonrefundable.

Fees Member—$690

Nonmember—$850

CP 2—Cathodic Protection Technician Exam-Only 4.5-Hour Examination Description Candidates meeting the prerequisites for CP 2 may sit for the Cathodic Protection Technician Certification exam without taking the CP 2–Cathodic Protection Technician course. The Exam-Only option consists of the same 2.5-hour written exam and 2-hour practical exam offered in the CP 2–Cathodic Protection Technician Course. Exam-Only candidates receive a CP 2–Cathodic Protection Technician course manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 2 course offerings. Candidates may only attend the course on the day of the exam.

www.nace.org/education

23

CP EXAM-ONLY COURSES CP 2—Cathodic Protection Technician Exam-Only (continued) Prerequisites All prerequisites must be met in order to register for the ExamOnly option. Candidates have three paths from which to choose.

If choosing to take the Exam-Only option for certification, please note that candidates must also have training equivalent to the information presented in the CP 2–Cathodic Protection Technician course. An approved application is required before certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam-Only Option Qualified candidates may sit for the Cathodic Protection Technician Certification exam without taking the class. The written exam is open book so that candidates can bring their own printed references; however, the practical exam is closed book. Due to the difficulty level of the Exam-Only Option, NACE highly recommends that individuals have prior CP training equivalent to the CP 2–Cathodic Protection Technician course in addition to the prerequisites listed for CP 2. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@nace.org. Registration fees for Exam-Only candidates are nonrefundable.

Fees Member—$690

Nonmember—$850

CP 3–Cathodic Protection Technologist Exam-Only 7.5-Hour Examination Description Candidates meeting the prerequisites for CP 3 may sit for the Cathodic Protection Technologist Certification exam without taking the CP 3–Cathodic Protection Technologist course. The ExamOnly option consists of the same 5-hour written exam and 2.5-hour problem solving exam offered in the CP 3–Cathodic Protection Technologist Course. Exam-Only candidates receive a copy of the CP 3–Cathodic Protection Technologist course manual by mail after registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 3 course offerings. Candidates may only attend the course on the day of the exam.

Prerequisites The same work experience requirements and prerequisites that apply to the CP 3–Cathodic Protection Technologist Course apply to the Exam-Only option. Candidates have three prerequisite paths from which to choose. If choosing to take the ExamOnly option for certification, please note that candidates must also have CP training equivalent to the training presented in the CP 3 course. An approved application is also required before

24

this certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam-Only Option Qualified candidates may sit for the Cathodic Protection Technologist Certification exam without taking the class. The written exam is open book so that candidates can bring their own printed references; however, the problem solving exam is closed book. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Fees Member—$690

Nonmember—$850

CP 4—Cathodic Protection Specialist Exam-Only 7.5-Hour Examination Description Candidates meeting the prerequisites for CP 4 may sit for the Cathodic Protection Specialist exam without taking the CP 4-Cathodic Protection Specialist course. The Exam-Only option consists of the same 5-hour written and 2.5-hour problem solving exams offered in the CP 4 course. Exam-Only candidates receive a copy of the CP 4–Cathodic Protection Specialist Course manual by mail after registering for the exam. Examinations are offered the last day of the regularly scheduled CP 4-Cathodic Protection Specialist course offerings. Candidates may only attend the course on the day of the exam.

Prerequisites The same work experience requirements and prerequisites that apply to the CP 4–Cathodic Protection Specialist Course apply to the Exam-Only option. Candidates have three prerequisite paths from which to choose. An approved application is required before certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: FirstService@nace.org to receive an application.

Exam-Only Option Qualified candidates may sit for the Cathodic Protection Specialist Certification exam without taking the CP 4 course. The written exam is open book so that candidates can bring their own printed references. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: FirstService@nace.org. Registration fees for exam only candidates are nonrefundable.

Fees Member—$690

Nonmember—$850

www.nace.org/education

Cathodic Protection SPECIALTY COURSES

CP Specialty Courses

Strongly recommended • CP Tester Certification or equivalent training

CP 2—Cathodic Protection Technician—Maritime

Option 3 • 3 years CP work experience PLUS • High school diploma or GED including algebra and logarithms training Strongly recommended • CP Tester Certification or equivalent training

6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m.

2nd–5th days: 8 a.m. to 6:30 p.m.

6th day: 8 a.m. to 3 p.m., unless otherwise noted Description Developed for NAVSEA (part of the U.S. Navy), this intensive sixday course presents CP technology to prepare students for the NACE Cathodic Protection Technician­ —Maritime Certification examination. The course represents a parallel path to certification with specific discussion pertaining to shipboard cathodic protection. It also provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current CP systems.

Course topics include intermediate level discussions of corrosion theory and CP concepts including those specific to ships, types of CP systems, AC and DC stray current interference, and advanced field measurement techniques specific to ships.

Who Should Attend This course is designed for individuals who work in the maritime industry, have a working knowledge of shipboard cathodic protection, or have extensive years of CP field experience with a technical background. Students must complete a preliminary application for certification at least 60 days in advance so that education and prerequisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balancing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1—Cathodic Protection Tester or equivalent; and comprehensive knowledge of electrochemistry, electricity, electrical laws and series and parallel circuits, meter operation, and CP fundamentals.

Prerequisites For each path, all prerequisites must be met in order to register for the CP2—Cathodic Protection Technician–Maritime course.

OPTION 1 • 1 year CP work experience PLUS • 4-year Physical Science or Engineering degree Strongly recommended • CP Tester Certification or equivalent training Option 2 • 2 years CP work experience PLUS • 2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training www.nace.org/education

Course Highlights (including but not limited to) • Corrosion Theory • CP Fundamentals • CP Systems • Corrosion Resistant Materials Used in Marine Vessels • DC Power Sources for CP and Shipboard CP • Safety Specific to CP • Field Measurements Specific to Marine Vessels • Stray Current and CP Interference • Monitoring CP Systems • Troubleshooting Skill Assessment To receive the Cathodic Protection Technician— Maritime certification, a student must pass an open book, written exam, a closed book, practical exam, and submit a certification application upon successful completion of the examination. A Certified NACE CP Technician— Maritime will possess the following skills and knowledge factors: • Perform advanced field tests and evaluate the results • Perform tests to verify the presence of stray current interference and recommend method(s) to mitigate the interference • Maintenance of documentation and records, including data plotting and analysis • Conduct and understand the importance of periodic surveys, including IR Free readings, polarization decay tests, and current measurements • Test and troubleshoot rectifier component parts • Understand corrosion coupon test stations • Understand code requirements related to CP • Understand AC voltage and its mitigation Fees Advanced Registration Member—$1,570

Nonmember—$1,755

Standard Registration Member—$1,730

Nonmember—$1,915

Reference Materials Included with Course Registration Fees Students receive the CP 2–Cathodic Protection TechnicianMaritime Course Manual on CD prior to the start of course. A printed course manual and Cathodic Protection Survey Procedures by W. Brian Holtsbaum are provided to students on-site.

5.0 CEUs

25

Cathodic Protection SPECIALTY COURSES Coatings in Conjunction with Cathodic Protection 6-Day Classroom Course 1st day: 1 p.m. to 5:30 p.m.

2nd–5th days: 8 a.m. to 5:00 p.m.

6th day: 8 a.m. to noon., unless otherwise noted Description The Coatings in Conjunction with Cathodic Protection (CCCP) course focuses on the control of metallic corrosion by protective coatings and cathodic protection, with coatings as the primary method of control supplemented by cathodic protection. A clear understanding of the synergistic relationship as well as the principles of the two technologies when used together is crucial to understanding the risks involved when either component fails to perform as engineered.

Parallel Path to Certification for • Senior Corrosion Technologist See page 47 for details.

The course will cover the selection, specification, application, testing and inspection of coatings when used with CP. CCCP provides students with the skills and knowledge to implement and monitor a corrosion control program that utilizes both methods. The course concludes with a written exam at the end of the week.

Who should attend?

CCCP is designed for personnel who design, test, inspect, apply and monitor various structures that are both coated and cathodically protected. Those responsible for making risk management and integrity decisions (managers and engineers) as well as field personnel and technicians will also benefit from the material in this course.

Course Highlights (including but not limited to) • Basic corrosion theory and CP fundamentals • Types of structures protected by coatings and CP • Synergistic relationship of coatings used in conjunction with CP • Advantages and disadvantages of coating types used with CP • Selection criteria, application, inspection and testing of various coatings • Failure modes of the various coatings in relationship to CP • Disbonded coatings as related to external corrosion and stress corrosion cracking • Defining CP shielding and non-shielding coatings • Proper examination and evaluation of in-service coatings used with CP

26

• Coating performance testing • Discussions of various CP survey techniques (CIS, DCVG, ACVG, current requirements, etc.)

• Evaluation of external corrosion Fees Advanced Registration Member—$1,570

Nonmember—$1,755

Standard Registration Member—$1,730

Nonmember—$1,915

Reference Materials Included with Course Registration Fees Students receive the Coatings in Conjunction with Cathodic Protection Course Manual on CD prior to the start of course.

A printed course manual and Corrosion Prevention by Protective Coatings, Second Edition by C.G. Munger, revised by L.D. Vincent are provided to students on-site.

4.8 CEUs

CP Interference 6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m.

2nd–5th days: 8 a.m. to 6:30 p.m.

6th day: 8 a.m. to 3 p.m., unless otherwise noted Description The Cathodic Protection Interference course focuses on AC, DC, and telluric interference. The course provides in-depth coverage of both theoretical concepts and practical applications of identifying interference and interference mitigation techniques. Students will learn to identify the causes and effects of interference, conduct tests to determine if an interference condition exists, and perform calculations required to predict AC interference.

Classroom instruction is comprised of lecture and discussion, in-class experiments, case studies, and group exercises. The course concludes with a written exam.

Who Should Attend This course is designed for individuals with extensive CP field experience, a strong background in mathematics, and a strong technical background in cathodic protection.

Prerequisites • CP 3—Cathodic Protection Technologist certification recommended • Minimum of 3 years CP work experience

www.nace.org/education

Cathodic Protection SPECIALTY COURSES • Thorough understanding of:

—Units conversions

—Scientific notation

—Advanced algebra

—DC circuits Previous exposure to:

—Basic AC circuits

—Complex numbers (i.e., imaginary numbers)

—Interference testing Course Highlights (including but not limited to) • Effects of stray current, AC voltage, and telluric currents on metallic structures • Detecting stray current, AC interference, and telluric current • Deleterious effects of AC and DC interference • Mitigation and monitoring of AC and DC interference • Predicting AC interference Fees Advanced Registration Member—$1,380 Nonmember—$1,560 Standard Registration Member—$1,535

Nonmember—$1,720

Reference Materials Included with Course Registration Fees Students receive the CP Interference course manual on CD prior to the start of the course. A printed course manual is provided to students on-site.

5.0 CEUs

www.nace.org/education

27

NACE On-Site

Training & Certification

Why send your employees to another city for training when NACE can send the training to you!

The NACE On-Site Course Training Program offers you the opportunity to have your employees trained and NACE certified at your own facility while saving money on travel expenses. On-Site Courses also give you flexibility to choose the training that best fits the needs of your company with convenient scheduling options.

Benefits of an On-Site Course: • No Travel Costs—The average cost, including travel, food and housing, to send an employee to another city for training is over $1400 and that doesn’t include the actual cost of the training. With NACE On-Site courses, we will send the instructor and course materials to you.

• Reduced Course Prices—On-Site courses fees are reduced from the list price of a standard public course.

Also, the more students you have the less expensive it is per student.

• Choose your own date, location and course—Schedule a course when it is most convenient for your company. Courses can be scheduled with a minimum of 30 days notice and can be held at your facility.

• On-Site Training Requirements ~~ A classroom large enough to accommodate seating and tables for students and instructors, audio and visualequipment, and instrumentation/equipment. Certain courses may require an additional room for examinations on the last day of class. ~~ Able to provide the required work stations, materials, tools and equipment for the Lab Day which provides important hands-on experience for our students. ~~ A minimum of 12 students is required for On-Site Training in the U.S., 15 for International.

To learn more about the On-Site training requirements or to schedule a course at your facility contact: Nalleli Cly, Training Logistics Coordinator, at +1 281-228-6412 or Nalleli.Cly@nace.org.

THE CORROSION SOCIETY

Pipeline Industry Programs As our pipeline infrastructure continues to age, it demands constant monitoring and maintenance. Add to that the changing regulatory requirements, it is now more important than ever that operators are aware of how corrosion and other defects can impact the integrity of the pipeline.

Significant cost savings can be realized by implementing available corrosion prevention and mitigation technologies as a component of an existing integrity management plan. The NACE Internal Corrosion and Cathodic Protection Programs offer the pipeline industry the technical knowledge and skills to ensure safe operation of our pipelines without failures that may jeopardize public safety, result in product loss, or cause property and environmental damage.

In addition to those programs, NACE will launch three new courses this Fall as part of its Pipeline Corrosion Integrity Management Program (PCIM). Pipeline Corrosion Assessment Field Techniques (P–CAFT), Direct Assessment, and InLine Inspection will join the existing PCIM Management course to complete the program. These courses may be taken as stand-alone training for continued professional development or as part of the path toward the Pipeline Corrosion Integrity Management certification.

The PCIM program offers two certification tracks. The PCIM Technician certification focuses on remediation technology and field techniques for carrying out integrity assessments. The PCIM Technologist certification will focus on the implementation and management of an integrity program for a pipeline system.

Pipeline Coating Applicator Training To learn about the Pipeline Coating Applicator Training course, please refer to page 14.

Cathodic Protection (CP) Program To learn about the courses within the Cathodic Protection (CP) Program, please refer to pages 18-27.

NACE Operator Qualification Program (OQ) To learn about the modules within the NACE OQ Program, please refer to page 36.

www.nace.org/education

29

INTERNAL CORROSION PROGRAM Internal Corrosion for Pipelines— Basic 5-Day Classroom Course 1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted Description Parallel Path to This course was designed to provide Certification for students with the fundamentals of • Internal Corrosion implementing, monitoring, and mainTechnologist taining an internal corrosion control See page 42 for program as part of an overall Pipeline details.

Integrity Management program. It is an introductory level course focusing on internal corrosion of liquid and natural gas pipelines used for transmissions, storage, and gathering systems. Classroom instruction consists of lecture, group exercises, cases studies and hands-on field testing using different instruments and techniques utilized to identify and monitor internal corrosion. The course concludes with both a written and practical examination.

Who Should Attend This course is geared toward individuals at the technologist level who have some background in corrosion and are familiar with pipeline operations.

Prerequisites • High School Diploma • 4 years internal corrosion work • It is also recommended that students have successfully completed the NACE Basic Corrosion Course (see page 3) and high school chemistry.

Course Highlights (including but not limited to) • Corrosion theory, types, and factors that influence corrosion • Monitoring methods including analysis of gas, liquid, and sludge/solid samples, examination of exposed surfaces, corrosion coupons, and electronic probes • Mitigation methods such as chemical treatment by biocides and corrosion inhibitors, drips, line-sweeping and pigs • Integrity assessment methods including direct assessment, in-line inspection and hydrostatic testing Fees Advanced Registration Member—$1,745 Nonmember—$1,930 Standard Registration Member—$1,905 Nonmember—$2,095

30

Reference Material Included with Course Registration Fees Students receive the Internal Corrosion for Pipelines course manual on CD prior to the start of the course. A printed course manual and the Field Guide for Investigating Internal Corrosion of Pipelines are provided to students on-site.

4.0 CEUs

Internal Corrosion for Pipelines— Advanced 5-Day Classroom Course 1st – 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted Description Parallel Path to The Internal Corrosion for Pipelines Certification for - Advanced course focuses on the • Senior Internal monitoring techniques and mitigation Corrosion strategies required to assess internal Technologist corrosion and develop and manage See page 42 for internal corrosion control programs. details.

Data interpretation, analysis and integration, as well as criteria for determining corrective action for high-level internal corrosion problems within a pipeline system, will be covered in detail. Classroom instruction consists of lecture, group exercises, and case studies. The course concludes with a written exam at the end of the week.

Who Should Attend Individuals responsible for implementation, maintenance, engineering, and/or management of internal corrosion control program for pipeline system.

Prerequisites To attend this course, students should meet the requirements on one of the following paths: Path 1 • Hold current NACE Internal Corrosion Technologist Certification Path 2 • 8 years internal corrosion work experience in a pipeline environment Path 3 • 4 years internal corrosion work experience in a pipeline environment plus a Bachelor’s degree in one of the following:

—Chemistry, Microbiology, Biology,

Chemical Engineering, Metallurgical Engineering

www.nace.org/education

INTERNAL CORROSION PROGRAM Course Highlights (including but not limited to) • Threat evaluation of a pipeline system using a set of criteria which includes any past failures, inspections and assessments, monitoring results, the presence of water and its composition, if microorganisms or solids are present, flow conditions, operating temperature and pressure, and system design • Monitoring techniques such as corrosion coupons, linear polarization and electrical resistance probes, electrical field mapping, ultrasonic testing, hydrogen and microbiological monitoring • Inspection methods including visual, magnetic flux leakage, manual, automated and guided wave ultrasonic testing, eddy current and radiographic testing to detect and evaluate damaged areas • Selecting a representative location for inspection and the criteria for choosing the appropriate inspection method and determining if mitigation is required • Mitigation methods including maintenance pigging, physical design changes and operational modifications • Minimizing internal corrosion during the design stage through materials selection, modification of environment, system configuration, operating parameters • Optimizing an internal corrosion program through risk management, economic evaluations and defined procedures for monitoring and maintenance operations, data management and integration and management of change Fees Advanced Registration Member—$1,745 Nonmember—$1,930 Standard Registration Member—$1,905 Nonmember—$2,095

Internal Corrosion Exam—Only Internal Corrosion for Pipelines–Basic (Exam-Only Option) The Internal Corrosion for Pipelines—Basic (Exam-Only Option) consists of a 2-hour written and a 2-hour practical examination.

Students seeking certification for Internal Corrosion Technologist and who are not enrolled in the Internal Corrosion for Pipelines—Basic course will take the same written and practical examinations offered in the classroom course.

Fees Member—$690 Nonmember—$850 Internal Corrosion for Pipelines—Advanced (Exam-Only Option) The Internal Corrosion for Pipelines—Advanced (Exam-Only Option) consists of a 2-hour written examination. Students seeking certification for Senior Internal Corrosion Technologist and are not enrolled in the Internal Corrosion for Pipelines— Advanced course will take the same written examination offered in the classroom course.

Fees Member—$690 Nonmember—$850

New Certification

Internal Corrosion Specialist To learn more about the new Internal Corrosion Specialist Certification, please refer to page 53.

Reference Material Included with Course Registration Fees Students receive the IC Advanced course manual on CD prior to the start of the course. A printed course manual, as well as NACE Corrosion Engineer’s Reference Book, Third Edition is provided to students on-site.

3.6 CEUs

www.nace.org/education

31

PIPELINE CORROSION integrity management program New Course

Pipeline Corrosion Assessment Field Techniques (P-CAFT) 5-Day Classroom Course 1st – 4th days: 5th day:

8 a.m. to 5 p.m.

8 a.m. to noon, unless otherwise noted

Description Parallel Path to The Pipeline Corrosion Assessment Certification for Field Techniques (P-CAFT) course • Pipeline Corrosion will cover corrosion basic principles Integrity and theory, field techniques, direct Management assessment, in-line inspection and (PCIM) Technician hydro testing techniques, indirect inSee page 43 for spections, direct examination, safety and data documentation. The course details. is presented in a format of lecture, discussion and group exercises. The course concludes with a written examination at the end of the week.

Who Should Attend The P-CAFT course is designed for maintenance, service, technical or field personnel responsible for the implementation and reporting of pipeline inspection activities. The P-CAFT course may be taken as stand-alone training for continued professional development or as part of the path toward the Pipeline Corrosion Integrity Management (PCIM Technician) certification Course Highlights (including but not limited to) P-CAFT will focus on remediation technology and field techniques for carrying out integrity assessments. The goal is to prepare an individual to: • Accurately collect data for used for the evaluation and monitoring of a pipeline corrosion integrity plan • Recognize pipeline anomalies • Make recommendations for resolving technical issues “in the ditch” • Evaluate a pipeline in-service using ECDA and ICDA methods and techniques • Recognize problems “in the ditch” and be able to collect the data necessary for further engineering evaluation Fees Advanced Registration Member—$1,830 Nonmember—$2,005 Standard Registration Member—$1,985 Nonmember—$2,165 3.6 CEUs

32

New Course

In-Line Inspection (ILI) 5-Day Classroom Course 1st – 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted Description The ILI course will cover the benefits of utilizing In-Line-Inspection, selection of technologies related to operational parameters, operational issues and evaluating data relevant to assessing fitness for service. The course is presented in a format of lecture, discussion and group exercises. The course concludes with a written examination at the end of the week.

Parallel Path to Certification for • Pipeline Corrosion Integrity Management (PCIM) Technologist See page 43 for details.

Who Should Attend Individuals responsible for implementation and/or management of an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimization.

Prerequisites No prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physical Science or Engineering is recommended.

Course Highlights (including but not limited to) • ILI and its relationship to overall integrity assessment • Benefits and limitation of utilizing ILI • Industry standards, regulations and best practices • Managing the ILI process • ILI System Selection • Types of ILI tools • Metal loss tools • Tool selection • Pipe cleanliness • Types of anomalies or threats to be detected • Safety • Pipeline operation • In-Line Inspection • Excavation • Pressure reduction • Pipeline Operational Issues • Risks of ILI • Responsibilities of the Operator and/or service provider • Planning and scheduling • Preparing the pipeline • Running the tools • Tracking • Product flow www.nace.org/education

PIPELINE CORROSION integrity management program • • • • • • • • • • • • • •

Offshore considerations ILI Data Analysis Determining the validity of the ILI data Interpretation/Analysis of the ILI data Criteria for prioritizing and ranking anomalies for investigation Excavation and ILI verification report Post ILI Activities Data management Managing results Reassessment options/intervals Feedback loop Quality Management System Quality system documentation and review Quality control

Prerequisites No prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physical Science or Engineering is recommended.

Direct Assessment (DA)

Course Highlights (including but not limited to) • Direct Assessment in relationship to an overall pipeline corrosion integrity management program • Benefits and limitation of DA • Industry standards related to DA • Comparison of DA to other pipeline integrity methods • Direct Assessment Phases • Pre-assessment • Indirect inspection • Direct examinations • Post assessment • External Corrosion Direct Assessment (ECDA) • Internal Corrosion Direct Assessment (ICDA) • Stress Corrosion Cracking Direct Assessment (SCCDA) • Confirmatory Direct Assessment (DA) • Establishing corrosion rates • Reassessment options/intervals • Quality assurance • Management of change • Continuous improvement • Responsibilities of the Operator and/or service provider

5-Day Classroom Course 1st – 4th days: 8 a.m. to 5 p.m.

5th day: 8 a.m. to noon, unless otherwise noted

Fees Advanced Registration Member—$1,830 Nonmember—$2,005

Fees Advanced Registration Member—$1,830 Nonmember—$2,005 Standard Registration Member—$1,985 Nonmember—$2,165 3.6 CEUs

New Course

Description Parallel Path to The Direct Assessment course will Certification for concentrate on internal, external and • Pipeline Corrosion stress corrosion cracking direct asIntegrity sessment along with pre and post Management assessment, quality assurance, data (PCIM) analysis and integration, and remeTechnologist diation and mitigation activities. The See page 43 for course will also cover the benefits details. and limitations of Direct Assessment, its relationship to an overall integrity assessment program and industry standards, regulations and best practices. The course is presented in a format of lecture, discussion and group exercises. The course concludes with a written examination at the end of the week.

Standard Registration Member—$1,985 Nonmember—$2,165 3.6 CEUs

Who Should Attend Individuals responsible for implementation and/or management an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimization. www.nace.org/education

33

pipeline corrosion integrity management PROGRAM Pipeline Corrosion Integrity Management (PCIM) 5-Day Classroom Course 1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted Parallel Path to Certification for • Pipeline Corrosion Integrity Management (PCIM) Technologist See page 43 for details.

Description The Pipeline Corrosion Integrity Management (PCIM) Course serves as the key training track for the PCIM professional who is expected to focus on the implementation and management of an integrity program for a pipeline system. The course provides a comprehensive up-to-date coverage of the various aspects of time-dependent deterioration threats to liquid and gas pipeline systems.

The training, which consists of classroom instruction and discussion, will focus on interpreting integrity related data, performing an overall integrity assessment on a pipeline system, calculating and quantifying risk, and making recommendations to company management on risk management issues. The course concludes with a written exam at the end of the week.

Who Should Attend Individuals responsible for implementation and/or management an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimization.

Prerequisites No prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physical Science or Engineering is recommended.

34

Course Highlights (including but not limited to) • Corrosion and pipeline integrity • Overview of CFR 49 and integrity requirements • Standards: managing system integrity (ILI and Hydrostatic Testing) and direct assessment processes (ECDA, SCCDA, and ICDA) • Threat identification and assessment • Selecting an integrity assessment method • Data collection, verification, integration and interpretation • Risk assessment and risk quantification and minimization through corrosion control • Integrity verification/assessment • Technical challenges to pipeline integrity including pipeline manufacturing, construction, operations and failure sources • Remediation activity and repair methods • Inspection and assessment intervals using remaining strength and corrosion growth rates • Post integrity assessment risk analysis • Integrity management planning • Change management including integrity management, performance, communication and quality control plans • Management perspectives and case studies Fees Advanced Registration Member—$1,830 Nonmember—$2,005 Standard Registration Member—$1,985 Nonmember—$2,165 4.0 CEUs

www.nace.org/education

MARINE INDUSTRY NACE International offers comprehensive training for the corrosion professional working in either the fixed offshore or shipboard marine applications. The marine industry is subject to formidable operating conditions in a highly corrosive atmosphere impacted by such variables as humidity, wind, temperature, airborne contaminants, location, and biological organisms.

The ability to minimize the impact of marine corrosion is crucial to protecting the strength, safety and life span of marine industry assets. NACE marine courses show students how to address these issues through inspection and maintenance planning that is also in compliance with regulatory and international standards.

Offshore Corrosion Assessment Training (O-CAT) To learn about the O-CAT course, please refer to page 5.

Shipboard Corrosion Assessment Training (S-CAT) To learn about the S-CAT course, please refer to pages 14-15.

CIP Level 2, Maritime Emphasis To learn about the CIP Level 2, Maritime Emphasis course, please refer to pages 10-11.

CP 2—Cathodic Protection TechnicianMaritime To learn about the CP2-Cathodic Protection-Maritime course, please refer to page 25.

Did You Know‌.

That you can receive a discounted rate when you register for a course more than 35 days in advance of the start date?

Learn more about Advanced Member or Nonmember fees on page 51.

www.nace.org/education

35

ONLINE SELF-STUDY TRAINING NACE Online Training is a valuable and cost-effective method for continuous education and overall productivity enhancement that provides students with an easy to use and convenient way to learn industry and technology specific corrosion solutions. Online Training provides a customizable learning experience allowing the student to work at his/her own pace from work, home or on the road with unlimited access 24/7.

New Course

Corrosion in the Water and Wastewater Industry Course Description

This online, self-paced course consists of eleven, 1-hour modules that introduce the fundamentals of corrosion in the water and wastewater industry. Key areas of coverage include current design, construction, and operation and maintenance practices for key water and wastewater infrastructure components.

Students may either choose to complete the modules in sequential order or those with more experience or with specific interests may select the modules that would most benefit them in their career. Students will earn a certificate of completion upon successful achievement of the online quiz given at the end of each module.

Visit www.nace.org/wateronline for more information and to register for this course.

5 - Forms of Corrosion

Generalized, localized, pitting, crevice and intergranular corrosion types are discussed. Galvanic, erosion, de-alloying, stress, fatigue and temperature based corrosion are also covered; as are the effects, causes and solutions for these various forms of corrosion.

6 - Methods of Corrosion Control

This module introduces the methods for slowing or preventing corrosion. Corrosion mitigation techniques include material section, environment modification, coating application and cathodic protection.

7 - Economics of Water Corrosion

Gain an understanding of the economics of water corrosion and the challenges corrosion presents to the industry. Detailed investigations cover the costs of water corrosion in pipes, storage tanks, reservoirs, and the impacts of wastewater corrosion.

8 - Water and Wastewater Corrosion

This module illustrates the physical and chemical properties that cause soil and water to act as corrosive agents. The most common forms of corrosion seen within the water and wastewater sectors are examined along with the mechanisms that accelerate water corrosion.

9 - Water and Wastewater Environments

This module looks at three environments in which water-based corrosion occurs. How the physical properties of a material and naturally occurring processes affect corrosion rates are discussed in subterranean, aqueous and atmospheric conditions.

10 - Material Selection for Water

No prior training or experience is required

Learn how material selection can reduce corrosion from water in multiple environments. Also covered are the chemical and physical processes that cause corrosion in water environments, and how different materials affect these processes. Other topics include common materials used to deter corrosion, and the ways in which these materials themselves corrode.

Module Highlights

11 - Water and Wastewater Corrosion Control

Who Should Attend

Anyone who needs the ability to recognize and understand corrosion in the water and wastewater industry.

Prerequisites

1 - Corrosion in the United States

Review the findings, results and suggested actions of the 2002 Corrosion Report. Understand the range and cost of corrosion in the United States with an emphasis on the Water and Wastewater Industry.

2 - Fundamentals of Corrosion

Learn the fundamentals of corrosion and how to prevent fatal disasters caused by it. Basic principles of chemistry and physics, such as atomic theory and molecular bonding are introduced to explain the science behind the corrosion cell, which is paramount to understanding corrosion.

3 - Environments of Corrosion

Corrosion rates vary depending on the material and environment.

Examine the different environments in which corrosion occurs, the interaction of these environments with material, and the corresponding effects on corrosion rates.

4 - Engineering Materials

Examine how ductile iron, steel, aluminum, concrete and copper are used in modern engineering projects along with the applications, characteristics and vulnerabilities of each material.

36

Understand the reasons why preventing corrosion is beneficial from cost savings to increased health to reducing wasted water and how to approach implementing a water corrosion mitigation plan.

Fees $75 per module

11 PDHs upon completion of all eleven modules

NACE Operator Qualification Program (OQ) In cooperation with

Course Description

The NACE OQ Training Program is a self-paced, online training and assessment program. The curriculum is designed to train pipeline professionals to meet the maintenance and safety requirements specified by the US Department of Transportation (DOT) Code of Federal Regulations (CFR) 142 parts 192 and 195.

www.nace.org/education

ONLINE SELF-STUDY TRAINING The program is available in four modules: (1) All 40 covered tasks, (2) Cathodic Protection, (3) Internal Corrosion and (4) Coatings. All modules include the selected covered tasks as wells as corrosion assessment, safety and abnormal operating conditions. Students will complete an online written assessment and performance verification at the conclusion of each covered task.

Please visit www.nace.org/oq to view all 40 covered tasks and to learn more about the OQ performance verifications, and to register for this course.

Module Highlights 1 - Role of the Inspector

What does an inspector do and what value do they bring to a coatings project? This module will provide answers to that question by looking at the roles and responsibilities of a coatings inspector

2 - Test Instrumentation

This program is geared for employees who have little or no experience in pipeline corrosion and/or require training that conforms to PHMSA OQ requirements.

Testing plays a vital role to ensure that coatings are installed as specified. This module will describe some of the basic instruments used to monitor environmental conditions, evaluate the level of surface preparation and measure the thickness of the installed coating film.

Prerequisites

3 - Coating Specification

Who Should Attend

No prior training or experience is required.

Fees • • • •

All 40 Covered Tasks—$400 Cathodic Protection Module—$200 Coating Module—$200 Internal Corrosion Module—$200

NACE is the OQ provider for IUPAT Members with the support of:

The Coating Specification provides the “roadmap” for installation of the coating. Some basic information needs to be included in the specification to make sure that the coatings inspector has the tools to ensure that the coatings are installed as specified.

4 - Coating Fundamentals

It’s important to understand the basic fundamentals of coatings material to appreciate the inspector’s role in their application.

This module will explore the components of a typical coating as well as the methods that coatings cure.

5 - Surface Preparation and Standards

New Course I.C.I. Online—Intro to Coating Inspection Course Description

This online, self-paced course consists of eight, 30-minute modules that introduce the fundamentals of coatings as well as the purpose and role of a coating inspector on a coatings project. Students may either choose to complete the modules in sequential order or those with more experience or with specific interests may select the modules that would most benefit them in their career. Students will earn a certificate of completion upon successful achievement of the online quiz given at the end of each module.

Visit www.nace.org/cionline for more information and to register for this course.

Who Should Attend

The course is geared for the beginner who is new to the protective coating and coating inspection industry.

Prerequisites No prior training or experience is required.

www.nace.org/education

The inspector performs critical testing during this phase to ensure the coatings to be installed have the best chance to reach their designed life-cycle. This module will explore the various methods of surface preparation and some of the critical aspects required for a successful coating project.

6 - Application Procedures

Coatings may be applied using equipment ranging from a brush and roller, conventional airspray, and airless spray to sophisticalted plural component systems. This module will describe the various processes and equipment for coatings application.

7 - Coating Defects

Unfortunately defects may occur when the specification is not followed or other problems occurred during the coatings installation. This module describes some of those defects and how to identify them.

8 - Pre-Job Conference

The purpose of the Pre-Job Conference is to take a proactive approach to the coatings project. The Pre-Job Conference is an opportunity for all parties to ensure complete understanding of the project requirements by addressing any vagueness or ambiguities before the project starts. This module will explore a Pre-Job Conference and it’s project benefits.

Fees $75 per module

4 PDHs upon completion of all eight modules

37

Is your NACE Certification

current?

Top 5 reasons to renew your

NACE Certification

worked hard to earn that certification.

1. You Why let it lapse? demonstrates your commitment 2. Recertification to your profession and continued mastery of your field.

more job opportunities and greater 3. Enjoy earnings potential – certifications are

becoming a preference when making hiring decisions in many organizations.

to be included in the NACE 4. Continue certification database used by potential employers.

5.

NACE Certifications are the most widely specified and recognized in the world!

THE CORROSION SOCIETY

CERTIFICATION PATHS and requirements Coating Inspector Program (CIP) Students must successfully complete each course and its corresponding exam before moving on to the next level of the program.

In order to be eligible for the related course certification, students must meet the requirements listed below.

CIP Certification Courses NACE Coating Inspector Level 1—Certified • Successful completion of CIP 1 course and exam (through Classroom course, or DVD with accompanying Exam Course 1) (page 7)

CIP Specialty Courses NACE Coating Inspector Bridge Endorsement • Current CIP Level 1 certification status or higher • Successful completion of CIP One-Day Bridge Course and exam (page 12) NACE Coating Inspector Level 2—Marine Certified • Current CIP Level 1 certification status • Successful completion of CIP Level 2, Maritime Emphasis course and exam (page 10)

NACE Coating Inspector—Nuclear Facilities Certification Supplement (NFCS) Endorsement NACE Coating Inspector Level 2—Certified • Current CIP Level 1 certification status • Successful completion of CIP 2 course and exam (through Classroom course, or DVD with accompanying Exam Course 2) (page 7)

NACE Certified Coating Inspector—Level 3 • Current CIP Level 2 certification status • Successful completion of the CIP Level 3 Peer Review (page 8) • Complete and submit work experience documentation to NACE

www.nace.org/education

Path 1 • Successful completion of Nuclear Power Plant Training for Coating Inspector course and exam (page 11) • Document 160 hours of work with coatings focused projects for a nuclear power plant • Current NACE CIP 1 Certification status or higher • Complete and submit work experience documentation within 24 months of completing the exam

Path 2 • Successful completion of Nuclear Power Plant Training for Coating Inspector exam (page 11) • Document 400 hours of work with coatings focused projects for a nuclear power plant • Current NACE CIP 1 Certification status or higher • Complete and submit work experience documentation within 24 months of completing the exam

39 39

CERTIFICATION PATHS and REQUIREMENTS Cathodic Protection (CP) Students may choose to take the CP certification courses in succession or those with more experience and who meet the prerequisites may choose which course would benefit them in their career.Successful completion of the course and its corresponding exam is required to be eligible for the related certification. In addition, students must also meet the work experience and education requirements listed below.

CP Certification Courses CP 1—Cathodic Protection Tester

CP 2—Technician – Maritime

• Successful completion of CP 1 classroom course and exam or exam only option (page 19)

• Successful completion of the CP 2 Maritime course and exam (page 25) • Plus one of the following paths—

CP 2—Cathodic Protection Technician • Successful completion of CP 2 classroom course and exam or exam-only option (page 20) • Plus one of the following paths— Path 1

• 3 years CP work experience • High school diploma or GED • CP 1 Certification or equivalent training • Submit CP Technician certification application to NACE Path 2 • 1 year of CP work experience • 4-year Physical Science or Engineering Degree • CP 1 Certification or equivalent training • Submit CP Technician certification application to NACE Path 3 • 2 years CP work experience • 2-year post-high school training from approved Math or Science Technical/Trade School

Path 1

• 3 years CP work experience, 1 year of which must be in the maritime industry • High School diploma • CP 1 certification or equivalent training • Complete and submit CP 2 – Maritime certification application and submit to NACE Path 2 • 2 years CP work experience, 1 year of which must be in the maritime industry • Associates degree from approved Math or Science Technical / Science Trade School or 2 years posthigh school training from approved Math or Science Technical / Science Trade School • CP 1 certification or equivalent training • Complete and submit CP 2 – Maritime certification application and submit to NACE Path 3 • 1 year of CP work experience in the maritime industry • 4 year Physical Science or Engineering Degree • CP 1 certification or equivalent training • Complete and submit CP 2 – Maritime certification application and submit to NACE

• CP 1 Certification or equivalent training • Submit CP Technician certification application to NACE

CP Specialty Courses Coatings in Conjunction with Cathodic Protection • Prerequisite: It is strongly recommended that students have CP 1—Cathodic Protection Tester certification or equivalent training • Students will earn a Certificate of Completion upon successful achievement of the course and exam (page 26)

40 40

www.nace.org/education

CERTIFICATION PATHS and requirements CP Certification Courses CP 3—Cathodic Protection Technologist

CP 4—Cathodic Protection Specialist

• Successful completion of CP 3 classroom course and exam or exam-only option (page 21)

• Successful completion of CP 4 classroom course and exam or exam only option (page 22)

• Plus one of the following paths—

• Plus one of the following paths—

Path 1

Path 1

• 8 years CP work experience with progressively increasing technical responsibilities

• 12 years ADVANCED Cathodic Protection Work experience including 4 years in responsible charge

• High school diploma or GED

• 2 years post-high school training in Math or Science from an approved Technical/Trade School

• Algebra and logarithm training • CP Technician certification or equivalent training

• CP Technologist Certification OR equivalent training

• Submit CP Technologist certification application to NACE

• Submit CP Specialist certification application to NACE Path 2

Path 2

• 6 years ADVANCED Cathodic Protection work experience including 4 years in responsible charge

• 6 years CP work experience with progressively increasing technical responsibilities • 2 year post high school training from an approved math or science technical/trade school including Algebra and logarithm training • CP Technician certification or equivalent training • Submit CP Technologist certification application to NACE Path 3 • 3 years CP work experience with progressively increasing technical responsibilities • 4 year Physical Science or Engineering degree • CP Technician certification or equivalent training • Submit CP Technologist certification application to NACE

• 4 year Engineering or Physical Science Degree • CP Technologist Certification OR equivalent training • Submit CP Specialist certification application to NACE Path 3 • 4 years ADVANCED Cathodic Protection work experience in responsible charge • One of the following: ~~ Bachelor’s degree in Engineering or Physical Sciences and an advanced degree in Engineering or Physical Sciences that required a qualification exam ~~ PE, P Eng., or equivalent ~~ EIT registration or equivalent • CP Technologist Certification OR equivalent training • Submit CP Specialist certification application to NACE

CP Specialty Courses CP Interference • Prerequisite: It is strongly recommended that students have CP 3—Cathodic Protection Technologist certification • Students will earn a Certificate of Completion upon successful achievement of the course and exam (page 26)

www.nace.org/education

41 41

CERTIFICATION PATHS and REQUIREMENTS

Internal Corrosion Training & Certification Internal Corrosion Technologist Path 1

Path 2

• Application – Internal Corrosion Technologist • High School Diploma • 4 years work experience including some background in corrosion and pipeline operations • One of the following: ~ Internal Corrosion for Pipeline—Basic course and exam or exam only option (page 30) ~ Internal Corrosion Technologist exam

• Application – Internal Corrosion Technologist • Bachelor’s degree in Chemistry, Biology, Microbiology, Chemical or Metallurgical Engineering • 2 years work experience in internal corrosion in a pipeline environment • One of the following: ~ Internal Corrosion for Pipeline—Basic course and exam or exam only option (page 30) ~ Internal Corrosion Technologist exam

Senior Internal Corrosion Technologist • • • •

Path 1 Application – Senior Internal Corrosion Technologist Bachelor’s degree in Chemical Engineering, Metallurgical Engineering, Chemistry Microbiology or Biology 4 years work experience in Internal Corrosion Internal Corrosion for Pipeline—Advanced course and exam or exam only option (page 30)

Path 2 • Application – Senior Internal Corrosion Technologist • Internal Corrosion Technologist certification • 8 years work experience in Internal Corrosion • Internal Corrosion for Pipeline – Advanced course and exam or exam only option (page 30)

Internal Corrosion Specialist Path 1 • Certification—Senior Internal Corrosion Technologist • Successful completion of the Internal Corrosion Specialist Exam (page 30) • Complete and submit Internal Corrosion Specialist Application to NACE

42 42

Path 2 • 8 years internal corrosion work experience • One of the following: ~~ Bachelor’s degree in Chemistry, Microbiology, Chemical Engineering, Metallurgical Engineering, or Biology ~~ Engineer-in-Training registration or equivalent ~~ Professional Engineer’s license • Successful completion of the Internal Corrosion Specialist Exam • Complete and submit Internal Corrosion Specialist Application to NACE

www.nace.org/education

CERTIFICATION PATHS and requirements

Corrosion Assessment Training & Certification S-CAT Technician • Successful completion of Shipboard Corrosion Assessment Training (S-CAT) course and exam (page 14)

O-CAT Technician • Successful completion of Offshore Corrosion Assessment Training (O-CAT) course and exam (page 5)

Pipeline Corrosion Integrity Management (PCIM) Training & Certification PCIM Technician • Successful completion Internal Corrosion for Pipelines- Basic classroom course and exam or exam only option (page 30) • Successful completion of Pipeline Corrosion Assessment Field Techniques (P-CAFT) classroom course and exam (page 32) • 2 years of pipeline work experience • Complete and submit PCIM Technician Certification Application to NACE

PCIM Technologist • • • •

Successful completion of Direct Assessment classroom course and exam (page 33) Successful completion of In-Line Inspection classroom course and exam (page 32) Successful completion of PCIM-Management classroom course and exam (page 34) Complete and submit PCIM Technologist Certification Application to NACE

PLUS ONE OF THE FOLLOWING PATHS: Path 1 • PCIM Technician Certification (page 43)

www.nace.org/education

Path 2 • Senior Corrosion Technologist Certification (page 47)

Path 4 Path 3 • 8 years • Senior Internal pipeline work Corrosion experience Technologist Certification (page 42) • High School diploma or GED • CP 2—Cathodic Protection Technician Certification (page 40) • CIP Level 2 Certification (page 39)

Path 5 • 4 years pipeline work experience • Bachelor’s Degree in Engineering or Physical Science

43 43

CERTIFICATION PATHS and REQUIREMENTS Protective Coating Program Training & Certification Protective Coating Technologist Parallel Path (Certification through course work)

Traditional Path (Certification through certification exams)

Option #1 • Successful completion of PCS 1 Basic Principles course and exam (page 15) • High school diploma or GED • 6 years work experience in Protective Coatings Field • Complete and submit Protective Coating Technologist Application to NACE

Option #1 • High school diploma or GED • 6 years work experience in Protective Coatings Field • Training equivalent to that contained in PCS 1 Basic Principles Course • Successful completion of the Protective Coating Technologist Exam • Complete and submit Protective Coating Technologist Application to NACE

Option #2 • Successful completion of PCS 1 Basic Principles course and exam (page 15) • Bachelor’s degree in Physical Science or Engineering • 3 years work experience in Protective Coatings Field • Complete and submit Protective Coating Technologist Application to NACE

Option #2 • Bachelor’s degree in Physical Science or Engineering • 3 years work experience in Protective Coatings Field • Training equivalent to that contained in PCS 1 Basic Principles Course • Successful completion of the Protective Coating Technologist Exam • Complete and submit Protective Coating Technologist Application to NACE

Protective Coating Specialist Parallel Path (Certification through course work) Option #1 • Successful completion of PCS 2 Advanced course and exam (page 16) • Successful completion of PCS 3 Management course and exam (page 16) • 4 years work experience in Protective Coatings Field • One of the following: ~ Bachelor’s degree in Physical Science or Engineering ~ NACE Protective Coatings Technologist Certification ~ NACE CIP Peer Certification ~ Frosio Coating Inspector Level III ~ SSPC Protective Coatings Specialist • Complete and submit Protective Coating Specialist Application to NACE Option #2 • Successful completion of PCS 2 Advanced course and exam (page 16) • Successful completion of PCS 3 Management course and exam (page 16) • High school diploma or GED • 8 years work experience in Protective Coatings Field • Complete and submit Protective Coating Specialist Application to NACE

44 44

Traditional Path (Certification through certification exams) Option #1 • 12 years work experience in Protective Coatings Field • High school diploma or GED • Successful completion of the Protective Coating Specialist Exam • Complete and submit Protective Coating Specialist Application to NACE Option #2 • 8 years work experience in Protective Coatings Field • One of the following: ~ Bachelor’s degree in Physical Science or Engineering ~ NACE Protective Coatings Technologist Certification ~ NACE CIP Peer Certification ~ Frosio Coating Inspector Level III ~ SSPC Protective Coatings Specialist • Successful completion of the Protective Coating Specialist Exam • Complete and submit Protective Coating Specialist Application to NACE

www.nace.org/education

CERTIFICATION PATHS and requirements NACE Specialty Certifications These certifications are geared toward individuals who are experienced, knowledgeable, and capable of performing work at an advanced level in both the theory and practice of a particular area of corrosion and corrosion control. To obtain one of these five specialty certifications, you must first meet the requirements listed, then submit the corresponding application, and successfully complete the appropriate proctored exam.

Corrosion Specialist • One of the following NACE certifications: ~~ Certification – Chemical Treatment Specialist ~~ Certification – Materials Selection/Design Specialist ~~ Certification – Cathodic Protection Specialist ~~ Certification – Protective Coating Specialist • Successful completion of the Corrosion Specialist Exam • Complete and submit Corrosion Specialist Application to NACE

Chemical Treatment Specialist Path 1 • Certification – Senior Corrosion Technologist (page 47) • Successful completion of the Chemical Treatment Specialist Exam • Complete and submit Chemical Treatment Specialist Application to NACE

Path 2 • 4 years corrosion work experience in responsible charge • One of the following: ~~ Bachelor’s degree in Physical Science or Engineering and an advanced degree in Physical Science or Engineering that required a qualification examination ~~ Engineer-in-Training registration or equivalent ~~ Professional Engineer’s license • Successful completion of the Chemical Treatment Specialist Exam • Complete and submit Chemical Treatment Specialist Application to NACE

Protective Coating Specialist

• Please see page 44 for specific information on how to achieve this certification and parallel path options.

Cathodic Protection Specialist

• Please see page 41 for specific information on how to achieve this certification.

Internal Corrosion Specialist

• Please see page 42 for specific information on how to achieve this certification.

Materials Selection / Design Specialist Path 1 • Certification – Senior Corrosion Technologist (page 47) • Successful completion of the Materials Selection/Design Specialist Exam • Complete and submit Materials Selection/Design Specialist Application to NACE

www.nace.org/education

Path 2 • 4 years corrosion work experience in responsible charge • One of the following: ~~ Bachelor’s degree in Physical Science or Engineering and an advanced degree in Physical Science or Engineering that required a qualification examination ~~ Engineer-in-Training registration or equivalent ~~ Professional Engineer’s license • Successful completion of the Materials Selection/Design Specialist Exam • Complete and submit Materials Selection/Design Specialist Application to NACE

45 45

CERTIFICATION PATHS and REQUIREMENTS NACE Generalist Certifications Generalist Certifications can be obtained in one of two ways, through Parallel Path or Traditional Path. The Parallel Path allows you to achieve certification through taking courses, passing the exams, and then submitting an application for one of the Generalist Certifications listed below. With the Traditional Path, you obtain certification by meeting work experience and/or education requirements, passing the appropriate exam, and then completing the application process.

Protective Coating Technologist • Please see page 44 for specific information on how to achieve this certification and parallel path options.

Corrosion Technician (Geared towards an individual with little work experience but has some knowledge of corrosion and corrosion control) Parallel Path (Certification through course work)

Traditional Path (Certification through certification exams)

• Successful completion of Basic Corrosion course and exam (see page 3)

• 2 years corrosion work experience

• 2 years corrosion work experience • Complete and submit Generalist Certification Application to NACE

• To verify work experience, complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technician exam • Successful completion of Corrosion Technician exam

Corrosion Technologist (Geared towards an individual with moderate experience and has some knowledge of corrosion and corrosion control) Parallel Path (Certification through course work)

Traditional Path (Certification through certification exams)

• Successful completion of Basic Corrosion course and exam (see page 3) OR Corrosion Technician Certification

• 4 years corrosion work experience

• One from Menu A • One from Menu B • 4 years corrosion work experience

• Complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technologist exam • Successful completion of Corrosion Technologist exam

• Complete and submit Generalist Certification Application to NACE

*see menus A & B at the bottom of page 47.

46 46

www.nace.org/education

CERTIFICATION PATHS and requirements Senior Corrosion Technologist

(Geared towards an experienced individual with practical knowledge in multiple areas of corrosion and its control) Parallel Path (Certification through course work)

Traditional Path (Certification through certification exams)

Option #1 • 8 years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge • Successful completion of Basic Corrosion course and exam (page 3) OR Corrosion Technician Certification • Successful completion of Designing for Corrosion Control course and exam (page 4) • One from Menu A • One from Menu B • One additional course from Menu A,B, or C • Successful completion of Chemical Treatment Specialist Exam OR Internal Corrosion for Pipeline Basic (page 30) • Complete and Submit Generalist Certification Application to NACE

• 8 years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge • Complete and Submit Generalist Certification Application to NACE prior to taking the Senior Corrosion Technologist Exam • Successful completion of the Senior Corrosion Technologist Exam

Option #2 • 8 years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge • Corrosion Technologist Certification • Successful completion of Designing for Corrosion Control course and exam (page 4) • One from Menu A • One from Menu B • Successful completion of Chemical Treatment Specialist Exam OR Internal Corrosion for Pipeline Basic (page 30) • Complete and Submit Generalist Certification Application to NACE

Successful completion of: Menu A • CP Tester course and exam • CP Technician course and exam* • CP Technologist course and exam* • CP Specialist course and exam* * Must meet work experience requirements

www.nace.org/education

Menu B Menu C • PCS 1 Basic Principles • Coatings in Conjunction with • CIP Level 1 Cathodic Protection • PCS 2 Advanced Note: you cannot obtain multiple credit toward certification from a single course

47 47

RENEWING YOUR NACE CERTIFICATION To uphold the integrity of your NACE Certification, you must renew your certification every three years. Renewal involves documentation of work experience and continuing professional development. NACE International will contact you 90 days before your certification expires.

It is the responsibility of persons certified by NACE International to apply for and complete the certification renewal process. Failure to receive a notice from NACE International shall not be accepted as reason for failure to apply and/or complete the renewal process.

Renewal Period

Renewal Fees

Every three (3) years

Members—$140 per three years Nonmembers—$350 per three years for all certifications

Professional Development Requirements Professional development hours vary for certain levels of certification. The table below outlines the hours required for each certification type.

Specialist Certifications

Hours/year

Work Experience Required (years)

Corrosion Specialist

20

1.5

Cathodic Protection Specialist

20

1.5

Chemical Treatment Specialist

20

1.5

Materials Selection/Design Specialist

20

1.5

Protective Coating Specialist

20

1.5

Internal Corrosion Specialist

20

1.5

Corrosion Technician

8

1.5

Corrosion Technologist

8

1.5

Senior Corrosion Technologist

12

1.5

Protective Coating Technologist

8

1.5

CP 1 Tester

8

1.5

CP 2 Technician

8

1.5

CP 2 Technician—Maritime

8

1.5

CP 3 Technologist

8

1.5

Generalist Certifications

Cathodic Protection Certifications

Coating Inspector Certifications NACE Coating Inspector Level 1—Certified

1.5

NACE Coating Inspector Level 2—Certified

1.5

NACE Certified Coating Inspector—Level 3

1.5

NACE Certified Coating Inspector—Nuclear Facilities Certification Supplement

1.5

Internal Corrosion Certification Internal Corrosion Technologist

12

1.5

Senior Internal Corrosion Technologist

12

1.5

48 48

www.nace.org/education

CERTIFICATION faqS Q: What action is required of me to renew my certification?

A: Please note that it is your responsibility to know your expiration date. NACE will notify you when it is time to renew based on the contact information we have on file for you. We will provide you with your access information to your NACE profile page at www.nace.org where you can apply for certification renewal.

Q: What qualifies as professional development?

A: Professional development refers to educational activities that include, but are not limited to, attending corrosion related courses, seminars, meetings, technical papers, webinars, or presentations.

Q: Which NACE Certifications offer a Parallel Path option?

A: Corrosion Technician, Corrosion Technologist, Senior Corrosion Technologist, Protective Coating Technologist, and Protective Coating Specialist. See the Certification at a Glance Section for more details.

Q: If I choose the Parallel Path option, do I still need to meet the work requirements?

A: Yes, all work requirements must be met for each certification.

Q: How is work experience documented?

A: Special reference forms are included with your application.

Q: Can I use work documentation that I previously turned in?

A: Yes, if this documentation is used within one (1) year.

Q: What is the difference between “acceptable work experience” and “acceptable work experience in responsible charge?”

A: Acceptable work experience” and “acceptable work experience in responsible charge” both refer to documented work experience in the field of corrosion which includes: (a) the investigation of corrosion causes and mechanisms, (b) the investigation, design, and implementation of corrosion control procedures, or (c) the teaching of corrosion related science. However, “acceptable work experience in responsible charge” should be at a level of responsibility requiring initiative, technical ability, and independent judgment.

Q: Are there any alternatives to actual “work experience” or “work experience in responsible charge?”

A: There are no alternatives to “work experience” or “work experience in responsible charge.”

Q: Once I have successfully completed a course, how long do I have to apply it towards a certification?

A: You have five (5) years to apply a course towards certification.

Q: Are there any time constraints to completion of your certification by exam?

A: You have one (1) year from the time when your application is approved in which to take the examination.

Q: What is the NACE International Attestation?

A: This is a document that attests to your knowledge that you understand the privileges and responsibilities which come along with NACE International Certification. By signing the Attestation, you agree to adhere to certain standards and abide by certain work ethics. Failure to comply could result in disciplinary action.

Q: Do I have to renew my certification?

A: Yes, all certifications renew every three (3) years. Go to the NACE Web site to renew online at www.nace.org.

Q: Do I have to pay a fee to renew my certification?

A: Yes, every three (3) years you pay a fee to renew your certification—$140 for Members and $350 for Nonmembers. You no longer have to pay Annual Maintenance Fees for your certification.

Q: How long can my file remain open after I have submitted my application paperwork?

A: Files remain open for two years with no activity. Files older than two years with no activity will be closed.

Q: What happens if I do not renew my certification?

A: NACE allows a three month grace period (90 days) after your certification expiration date before your record is marked as “terminated.”

You have up to five years to reinstate your certification and pay all fees in arrears. Any certification lapsed for more than five years will NOT be eligible for reinstatement and will require starting the program over from the beginning.

www.nace.org/education

49 49

registration FEES Coating Inspector Program (CIP) CIP Level 1

Member

Nonmember

Advance Registration Fees $1,770

$1,955

Member

Nonmember

Standard Registration Fees $1,930

$2,095

CIP Level 1 Exam Course

$1,405

$1,545

$1,560

$1,685

CIP Level 2

$1,770

$1,955

$1,930

$2,095

CIP Level 2 Exam Course

$1,405

$1,545

$1,560

$1,685

CIP Level 2, Maritime Emphasis

$1,770

$1,955

$1,930

$2,095

$925

$1,105

$1,120

$1,310

$1,100

$1,285

$1,260

$1,425

$375

$510

$455

$550

$850

$1,025

$1,005

$1,185

CIP Level 3 Peer Review Nuclear Power Plant Training for Coating Inspectors CIP One Day Bridge Course GENERAL COATINGS PCS 1 Basic Principles

$850

$1,025

$1,005

$1,185

PCS 3 Management

PCS 2 Advanced

$1,395

$1,605

$1,580

$1,765

Pipeline Coating Applicator

$2,795

$2,900

$3,115

$3,285

$1,570

$1,755

$1,730

$1,915

CATHODIC PROTECTION PROGRAM (CP) CP 1-Cathodic Protection Tester CP 2-Cathodic Protection Technician

$1,570

$1,755

$1,730

$1,915

CP 2-Cathodic Protection Technician–Marine

$1,570

$1,755

$1,730

$1,915

CP 3-Cathodic Protection Technologist

$1,380

$1,560

$1,535

$1,720

CP 4-Cathodic Protection Specialist

$1,380

$1,560

$1,535

$1,720

$690

$850

Cathodic Protection Tester Exam Only Option–CP 1, CP 2, CP 3, CP 4 CP Interference

$1,380

$1,560

$1,535

$1,720

Coatings in Conjunction with Cathodic Protection

$1,570

$1,755

$1,730

$1,915

Offshore Corrosion Assessment Training (O-CAT)

$1,465

$1,650

$1,625

$1,810

Shipboard Corrosion Assessment Training (S-CAT)

$1,465

$1,650

$1,625

$1,810

$1,830

$2,005

$1,985

$2,165

Corrosion Assessment Training

PIPELINES PCIM–Management Internal Corrosion for Pipelines – Basic

$1,745

$1,930

$1,905

$2,095

Internal Corrosion for Pipelines – Advanced

$1,745

$1,930

$1,905

$2,095

$690

$850

$1830

$2005

$1985

$2165

Internal Corrosion for Pipelines (Exam Only Option)– Basic and Advanced Direct Assessment In-Line Inspection

$1830

$2005

$1985

$2165

Pipeline Corrosion Field Assessment Techniques (P-CAFT)

$1830

$2005

$1985

$2165

GENERAL EDUCATION Basic Corrosion

$1,025

$1,230

$1,210

$1,395

Corrosion Control in the Refining Industry

$1,795

$1,980

$1,955

$2,140

$1,025

$1,230

$1,210

$1,395

Item #

Member

Nonmember

Designing for Corrosion Control ONLINE—SELF STUDY I.C.I. Online

Fees Per Module $75

Corrosion in the Water and Wastewater Industry

$75

Operator Qualification (OQ)—All 40 Covered Tasks

$400

Operator Qualification (OQ)–Cathodic Protection, Coating and Internal Corrosion each

$200

CD-ROMS Basic Corrosion—Single User License-Includes 1 Basic Corrosion Study Manual

48350-01

$975

$1,155

Basic Corrosion—Five User License-Includes 5 Basic Corrosion Study Manuals

48350-05

$3,075

$3,610

CIP CD-ROM Set 1—Single User License (Multiple version available upon request)

44100

$390

$390

CIP CD-ROM Set 2—Single User License (Multiple version available upon request)

44200

$390

$390

Registration fees are subject to change without notice. For all courses held outside of the United States, please see note at the bottom of the page. To take advantage of the advance registration savings, registration form and payment must be received at NACE Headquarters 35 days prior to start date of course.

50 50

www.nace.org/education

Important INFORMATION Class Registration To qualify for Advanced Member or Advanced Nonmember fees, a completed registration form with payment must be received at NACE 35 days prior to the class date. Class registration fees include student manuals, course materials, refreshment breaks, and reference books where indicated. Attendees are responsible for their own expenses, including, but not limited to, hotel, airfare, and meals. Participants are responsible for making their own accommodation arrangements directly with the hotel. NACE regrets that it cannot be responsible for any loss or damages incurred as a result of cancellation of a course by NACE for any reason.

Fee Payments** All software license, class, and exam registration fees must be paid in U.S. dollars. For classes outside of North America, fees in local currencies may apply. Contact NACE Headquarters or the stated local contact before making final plans. For class or exam registrations, advance registration accompanied by full fee payment is required to guarantee a seat. Payment in full is due at the time of enrollment. NACE does not invoice for class registration. A confirmation letter will be mailed when payment is received with completed registration forms. Program fees are subject to change without advance notice.

Cancellation and Refund Policy For classes in Canada and the U.S., paid or guaranteed registrations cancelled in writing at least 35 calendar days in advance of a class will receive a full refund, less a $60 service fee. Paid or guaranteed registrations cancelled in writing 34 to 3 days before a class will receive a refund of 50% of the registration fee. No refunds or credit will be issued on cancellation requests received less than 3 days before a class begins. Based upon availability, transfer to another class is permitted one time, with the following fees: 35 or more days in advance of the start date, the fee is $45; 34-3 days before the start date, the fee is $115. Transfers may not be made less than 3 days before a class begins. All requests for transfer or cancellation must be submitted in writing. Exam Only fees and Exam Only Retake Fees are nonrefundable.

Software Returns The CIP DVD Sets 1 and 2, the Basic Corrosion Course on CD, and the OQ Manual on CD are licensed as final sale items. No returns are accepted on these products with the exception of defective merchandise.

Software Shipping Purchaser pays actual shipping costs in addition to the license fee. For faster processing of your order, use a credit card for payment, or contact NACE FirstService at +1 800-797-6223 for a shipping quote.

Equal Opportunity It is the policy and practice of NACE to assure that no person will be discriminated against or be denied the benefits of any activity or program on the basis of the individual’s race, color, religious creed, sex, marital status, national origin, ancestry, sexual orientation, or disability.

Continuing Education Units (CEUs) Course participants may receive CEUs. Refer to the description of each course on the NACE Web site (www.nace.org/education) for information on CEU credits.

Membership A one-year membership is included in the Nonmember course fee, regardless of your membership status at the time of course registration. If you are a member at the time of registration but pay the Nonmember Fee, your membership will be extended for one year. This membership offer is only valid at the time you complete this form. Membership will be processed upon completion of the course, determination of eligibility, and once all payments have been processed. This $130 value includes a $12 subscription to Materials Performance magazine. If you do not wish to take advantage of the one-year membership and subscription to Materials Performance, then you must check the box marked “No” on the course registration form.

Registration & Licensing Fees for CDs and DVDs Registration and license fees are subject to change without notice.

**NOTE: (1) NACE-approved Training Sponsors outside of the U.S. may have fees that vary from the fees listed in this guide, based upon regional economics and fees for similar technical courses in their respective regions. (2) Registration fees for Canadian courses have been adjusted to include GST/HST where applicable.

www.nace.org/education

51 51

TWO WAYS to register for a

NACE course

Online to www.nace.org/eduschedule and select the 1. Go course you wish to take. Then choose your preferred course date and location and click on the Register link.

– OR –

the NACE First Service Department by calling toll 2. Contact free at +1 800 797 6223 (US and Canada) or worldwide at +1 281 228 6223.

First Service Hours of Operation Monday – Thursday: 7 a.m. to 6:30 p.m. CST Friday: 7 a.m. to 5 p.m. CST For courses designated as Partner, Licensee or Sponsored, please click on the course code to contact the Training Sponsor for course pricing and registration. Additional fees may apply to the published pricing for courses held outside the United States.

Payment is due in full at the time of registration. Please have your credit card number, expiration date, security code, and name as it appears on the card available to register over the telephone or on the NACE website at www.nace.org. Please note: A physical mailing address is required in order to ship training material in advance for certain NACE courses.

NACE regrets that it cannot be responsible for any loss or damage incurred as a result of cancellation of a course for any reason. This includes, but is not limited to, airfare penalties and/or hotel penalties. Please contact First Service to check the status of a course before making any nonrefundable travel arrangements.

Please note: course fees, dates and locations are subject to change without notice. For the most up to date course schedule and information, visit www.nace.org/eduschedule.

NACE International has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102. In obtaining this approval, NACE International has demonstrated that it complies with the ANSI/IACET I-2001 Standard which is widely recognized as the Standard of good practice internationally. As a result of their Authorized Provider status, NACE International is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.

NOW AVAILABLE Internal Corrosion Specialist Certification The launch of the new Internal Corrosion Specialist Certification exam completes the NACE Internal Corrosion training and certification program. Professionals seeking the Internal Corrosion Specialist certification should possess the skills and knowledge to successfully design, implement, evaluate and manage an internal corrosion integrity management program, regardless of industry.

Exam Prerequisites Candidates must meet the education and work experience requirements from one of the two prerequisite paths listed on page 42, before registering for the Internal Corrosion Specialist Exam.

Knowledge and Task Requirments Candidates should possess the following skill and knowledge factors:

• Possess the skills and knowledge to perform the tasks of individuals certified at the Senior Internal Corrosion Technologist level

• Have a thorough understanding of electrochemical and corrosion principles, field testing, laboratory analysis, monitoring techniques, mitigation strategies and inspection methods

• Capable of designing and implementing an internal corrosion integrity management program that complies with applicable regulations and standards for various industries but with emphasis on oil and gas

• Capable of evaluating and managing maintenance and monitoring plans specific to the environment in which they are working (eg pipeline, cooling water systems, potable water systems, water treatment plants, processing plants and steam boilers) and determining standard operating procedures for maintenance and monitoring internal corrosion.

Visit www.nace.org/education to learn more about the Internal Corrosion Specialist Exam.

THE CORROSION SOCIETY

1440 South Creek Drive Houston, TX 77084-4906 Phone: 1 800-797-6223 (US/Canada)

+1 281-228-6223 (Worldwide) Fax: +1 281-228-6329 Web: www.nace.org

THE CORROSION SOCIETY