WIRE & CABLE PREPARATION TOOLS • • • •
ELECTRICAL ELECTRONICS FIBER OPTIC TELECOMMUNICATIONS
Table of Contents FIBER OPTICS Examples of Typical Glass Fiber-Optic Constructions...........................................................................70 Comparative Fiber Optic Tool Selection Charts......................................................................................71 FO 103-S Fiber Optic Stripper Line..............................................................................................................72 FO 103-D-J, FO 103-D-250 “Dual-Hole” Fiber Optic Strippers....................................................................73 FO 103-T-250-J “Tri-Hole” Fiber Optic Stripper............................................................................................73 NO-NIK® FIBER OPTIC STRIPPER 3-PIECE KIT.......................................................................................74 FIBER OPTIC 3-PIECE STRIPPING KITS...................................................................................................74 NO-NIK® Fiber Optic Strippers......................................................................................................................75 CFS-2, CFS-2 900, OPTISTRIP Fiber Optic Stripper...................................................................................76 FO-R12 Fiber Ribbon Access Tool...............................................................................................................76 STR Steel Tape Remover.............................................................................................................................77 IET Insertion–Extraction Tool........................................................................................................................77 ACS, ACS-2, ACS-K Armored Cable Slitter.................................................................................................78 BrightPath EMS 6.6/4.0 CommScope® Mid Span Entry Tool......................................................................78 FDS, FDS-2-3MM Fiber Drop Stripper & Buffer Tube Slitter........................................................................79 MSAT, MSAT 5 Mid-Span Access Tool........................................................................................................80 FTS Fiber Tube Scorer.................................................................................................................................81 400 Fiber Buffer Tube and Drop Cable Slitter..............................................................................................81 400 Series Kit Fiber Buffer Tube and Drop Cable Slitter....................................................................... 82-83 RBT Riser Break-Out Tool............................................................................................................................83 FOKC Fiber Optic Kevlar® Cutter..................................................................................................................84 86 1/2SF Electronics/Kevlar® Shears.............................................................................................................84 KS-1, KC699 Kevlar® Shears........................................................................................................................85 DS-60-C, DS-90-W Diamond-Tip Fiber Optic Scribe.....................................................................................86 CS-30-W Carbide-Tip Fiber Optic Scribe......................................................................................................86 CS-30-DE Double End Carbide Fiber Optic Scribe.......................................................................................86 FOC-SS Fiber Optic Cleaver.........................................................................................................................87 RMC-6 Ruler.................................................................................................................................................87 CC125 Fiber Optic Cleaver..........................................................................................................................88 Fiber Optic Crimp Tool...............................................................................................................................88 Fiber Optic Inspection Microscope 200x/400x.........................................................................................89 FOPD-25, FOPD-LC, FS800, FS 900 Fiber Optic Polishing Disc................................................................90 FO-VFL Fiber Optic Visual Fault Locator......................................................................................................91 CCT-2001 Fiber Continuity Tester................................................................................................................91 FIBER OPTIC POLISHING KIT....................................................................................................................92 FIBER OPTIC SAFETY KIT..........................................................................................................................93 MDP-8 Miller Dispensing Pump....................................................................................................................93 MDP-4 Miller Dispensing Pump....................................................................................................................94 100 Adjustable Wire Stripper & Cutter..........................................................................................................94 103-S Adjustable Wire Stripper & Cutter with cam adjustment....................................................................95 111-TAS Thumb Adjustable Wire Stripper & Cutter.....................................................................................95
ELECTRICAL RCS-114, RCS-158 Round Cable Strippers.................................................................................................96 MK02, MK02M Round Cable Strippers.........................................................................................................97 MK01DA Outer Jacket Cable Stripper..........................................................................................................98 MK04 Cable Jacket Stripper.........................................................................................................................98 721, 821, 921 Multi-Wire Strippers/Cutters...................................................................................................99 PS 1 Self-Adjusting Wire Stripper...............................................................................................................100 MK 1 F/D Self-Adjusting Wire Stripper.......................................................................................................100 PS 2 Self-Adjusting Wire Stripper...............................................................................................................101 NO-NIK® Wire Strippers....................................................................................................................... 102-103 60 Utility Cutter............................................................................................................................................104 95 Romex Cable Ripper..............................................................................................................................105 205 Rural “C” Line Wire Slitter & Stripper...................................................................................................105 305 Figure-8 Aerial Self Supporting Duct Slitting Tools..............................................................................106 925CS/925CS-ERGO, CK6, 925CS KIT Splicer’s Scissors/Splicer’s Knife/Splicer’s Kit............................107
67 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
ELECTRONICS SPECIALTY SCISSORS.............................................................................................................................108 TWEEZERS.................................................................................................................................................109 AW, AWG Anti-Wicking Tools......................................................................................................................110 85 Long Nose Plier...................................................................................................................................... 111 DESOLDERING GUNS ..............................................................................................................................112 SOFTY® ANTI-STATIC DISPOSABLE WORK MATS................................................................................113
TELECOM PDT-66/110 Punch Down Tool.....................................................................................................................114 RJC, RJ Crimping Tool................................................................................................................................114 BTC BT/RJ Crimping Tool...........................................................................................................................115 SMART-STRIP Data Cable Strippers.........................................................................................................115 LDT-UTP, DDT-UTP ...................................................................................................................................116
Phone: 860-635-2200 68
NOTES
69 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
EXAMPLES OF TYPICAL GLASS FIBER-OPTIC CABLE CONSTRUCTIONS • • • •
125µm Equivalent to 0.005 in. 900µm Buffer Jacket, often referred to as “tight buffer”. loose tube, often referred to as “buffer tube”. 250 µm uv-cured buffer/coating, often referred to as “bare fiber”. Outer Jacket Aramid Yarn, Kevlar® 900µm Buffer Jacket 250µm UV-Cured Buffer/Coating 125µm Cladding & Core
Simplex
scale 10:1
Outer Jacket Aramid Yarn, Kevlar® 900µm Buffer Jacket 250µm UV-Cured Buffer/Coating 125µm Cladding & Core
Distribution Outer Jacket Aramid Yarn, Kevlar®
scale 2:1
Loose/Buffer tube common sizes: 2.0/2.5/3.0mm 250µm UV-Cured Buffer/Coating 125µm Cladding & Core
Indoor/Outdoor Loose Tube
scale 2:1
Phone: 860-635-2200 70
Diameter of Remaining Fiber or Buffer Coating
Miller No-Nik Tool
Miller FO-103 Tool
80 micron to 100 micron
NN-152 (Part# 46231) NN-175 (Part# 46235)
FO 103-S-100 (Part# 80355-1)
125 micron (from 250 micron buffer)
NN-175 (Part# 46235) NN-203 (Part# 46241)
FO 103-S (Part# 80355) FO 103-D-250 (Part# 80675) FO 103-D-J (Part# 80676) FO 103-T-250-J (Part# 80677)
250 micron
NN-305 (Part# 46255)
FO-103-D-250 (Part# 80675) FO-103-T-250-J (Part# 80677)
400 micron
NN-018 (Part# 46198) NN-021 (Part# 46200)
FO 103-T-250-400 (Part# 80740) FO 103-S-525 (Part# 80355-9)
125 micron (from 900 micron buffer)
Miller CFS-2 Tool
46107-M
FO 103-D-250 (Part# 80675) FO 103-T-250-J (Part# 80677)
Choose from the below tools To Access Fibers in Loose/Buffer Tubes
• 400 Series • BrightPath EMS 6.6/4.0 • FDS-2-3MM
Part numbers will vary, depending on the outside diameter of the buffer tube. Consult the individual catalog pages for more information.
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
COMPARATIVE FIBER OPTIC TOOL SELECTION CHARTS
71 www.ripley-tools.com
• MSAT (Mid-Span Access Tool) • MSAT 5 • FTS
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
FO 103-S
Fiber Optic Stripper Line
Part Model No. 80355 80355-1 80355-15 80355-2 80355-3 80355-4 80355-5 80355-10 80355-12 80355-6 80355-7 80355-8 80355-16 80355-9 80355-17 80355-18
FO 103-S FO 103-S-100 FO103-S-140 FO 103-S-150 FO 103-S-162 FO 103-S-175 FO 103-S-187.5 FO 103-S-200 FO 103-S-225 FO 103-S-250 FO 103-S-280 FO 103-S-300 FO-103-S-400 FO 103-S-525 FO-103-S-880 FO-103-S-1140
Finished Cladding Diameter
(Microns) (Inches) 125 µm .005 in. 80-100 µm .003-.004 in. 140 µm .0055 in. 150 µm .006 in. 162 µm .0065 in. 175 µm .007 in. 187.5 µm .0075 in. 200 µm .008 in. 225 µm .009 in. 250 µm .010 in. 275-280 µm .011 in. 300 µm .012 in. 400 µm .016 in. 525 µm .021 in. 880 µm .035 in. 1140 µm .045 in.
ELECTRONICS
ELECTRICAL
FO 103-S – Custom Applications • The same quality FO 103-S construction is available in a variety of stripping fiber diameters • Some models in the table below may be subject to a minimum order • Contact Customer Service for any applications listed in the table below U.S.: 860-635-2200 U.K.: +44-1384-400070
FIBER OPTICS
• For stripping 250 micron buffer coating from 125 micron optical fiber • Precision diameter hole & V-opening in blade allow for accurate buffer coating removal • Pivot pin, spring and precision handles enhance tool functionality and durability • Factory set, requires no adjustment • Prevents scratching or nicking of optical fiber • All cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal • Made in the U.S.A. • Length: 5.375 in (136.53 mm) • Weight: 2.5 oz (71 g)
TELECOM Phone: 860-635-2200 72
ELECTRONICS
FIBER OPTICS
FO 103-D-J, FO 103-D-250
“Dual-Hole” Fiber Optic Strippers • New Dual hole models offer the same quality as our standard FO 103-S fiber tool coupled with a second hole • FO 103-D-J: Second hole for stripping 2-3 mm fiber jackets and standard 125 micron fiber stripping (250 micron removal to 125 micron) • FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer coating and standard 125 micron fiber stripping (250 micron removal to 125 micron) – allows longer stripping lengths without damaging the fiber •E asy-to-read stripping diagrams imprinted on handles • Made in the U.S.A. • Length: 5.375 in. (137 mm) • Weight: 2.5 oz (71 g) • FO 103-D-J Part No.: 80676 • FO 103-D-250 Part No.: 80675
FO 103-T-250-J “Tri-Hole” Fiber Optic Stripper
•N ew three-hole model performs all common fiber stripping functions in one compact tool.... –H ole for removal of 2 to 3 mm fiber jackets –R emove 900 tight buffer to 250 micron buffer coating –S tandard 250 to 125 micron stripping •S ame consistent quality and features found in our standard FO 103-S tool • Also available: FO 103-T-400-250 Fiber Optic Stripper for 400 micron coated PM Fiber (Part No.: 80740) • Made in the U.S.A. • Length: 5.375 in. (137 mm) • Weight: 2.5 oz (71 g) • Part No.: 80677
73 www.ripley-tools.com
FO 103-D-J
FO 103-D-250
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
NO-NIK® FIBER OPTIC STRIPPER 3-PIECE KIT
• 821 MULTI-WIRE STRIPPER/CUTTER The 821 removes the outside jacket from fiber optic cable. • A vinyl case protects the tools and provides convenient safe storage. • Case size: 4 in. x 6-1/4 in. (102 mm x 159 mm) • Part No: NN152 KIT (46230), NN175 KIT (46234), NN203 KIT (46239), NN254 KIT (46247), NN305 KIT (46253) Phone: 860-635-2200 74
TELECOM
• 86 1/2SF HIGH LEVERAGE KEVLAR® SHEAR With a nonslip serrated blade, the Miller® 86 1/2SF High Leverage Kevlar® Shear provides the perfect solution for trimming back the DuPont Kevlar® that serves as the central strength member.
ELECTRONICS
• NO-NIK® FIBER OPTIC STRIPPER Miller® Fiber Optic Stripping Kits are available with a NO-NIK® Fiber Optic Stripper for each of the following minimum cutting diameters: 152 microns; 175 microns; 203 microns; 254 microns; and 305 microns. Operating instructions are included. Specify the size of the No-Nik needed when ordering your kit.
ELECTRICAL
FIBER OPTIC 3-PIECE STRIPPING KITS
FIBER OPTICS
This sturdy 3-piece NO-NIK® Fiber Optic Stripper Kit is available with the most popular sizes, 203 microns (Red Handles) 254 microns (Light Blue Handles) and 305 microns (White Handles). The vinyl case protects these precision tools and provides convenient safe storage. • Case size: 4 in. x 6-1/4 in. (102 mm x 159 mm) • Part No: NN03 (46219)
NO-NIK®
ELECTRICAL
FIBER OPTICS
Fiber Optic Strippers • NO-NIK® tools are offered in sizes ranging from 152 to 305 microns • Exclusive centering device positions fiber for precise scoring and removal of buffer coating • Color-coded, cushion-grip handles for quick identification • Plastic heads, which make contact only with the buffer, center and support your work on both sides • Cutting blades made from razor quality steel score the buffer completely • Back-up blades support the cutting blades, nest positively, and “lock up” when the tool is closed to maintain perfect concentricity • Buffer being removed acts as guide and protection for the fiber • Stripping blade diameter clearly marked on plastic handle • Arrow indicates direction pressure should be applied when stripping on head • Made in the U.S.A. • Length: 5.3 in. (135 mm) • Weight: 1.6 oz (45 g)
ELECTRONICS
®
NN305 NN254
TELECOM
NN203
NO-NIK® FIBER OPTIC STRIPPER SELECTION CHART Model
Handle Color
NN152 Gold NN175 Mustard NN203 Red NN254 Lt. Blue NN305 White
75 www.ripley-tools.com
Minimum Stripping Blade Diameter
Part No.
(Microns) (Inches) 152 µm .006 in. 46231 175 µm .007 in. 46235 203 µm .008 in. 46241 254 µm .010 in. 46249 305 µm .012 in. 46255
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
CFS-2 / CFS-2 900 Fiber Optic Stripper
Fiber Optic Stripper
ELECTRONICS
• Removes secondary coatings from optical cable and other small cables up to 3.0 mm (0.12 inches O.D.) • Equally effective on loose tube or tight fit fiber • Damage to cladding prevented by inserting guide bushings which ensure precise location of the fiber throughout the stripping operation • Simple setup for operation: fit a pair of guide bushings for selected lead diameter and adjust blade depth • Supplied with storage case and guide bushings (0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm) • Stripping Capacity – Fiber optic tubes up to 3.0 mm (0.12 inches O.D.) – P.T.F.E. coated wires 0.5 to 3.0 mm (0.02 to 0.12 inches) O.D. • Replacement Blades (pair): Part No.: 39436 • Replacement set guide bushings: Part No.: 39437 • Weight: 20 g (1 oz) • Dimensions: 108 x 29 x 13 mm ( 4.3 x 1.1 x 0.5 inches) • Part No.: 39435
ELECTRICAL
OPTISTRIP®
FIBER OPTICS
• CFS-2 for stripping 250 micron buffer coating to expose 125 micron cladded fiber • CFS-2 900 for stripping 250 and 900 micron buffer coating to expose 125 micron cladded fiber • Second hole for stripping 2-3 mm fiber jackets • Pre-set at the factory—no adjustments needed • Will not scratch or nick glass fiber • All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips • Comfort-grip, ergonomic handles • Lock to hold tool closed when it is not in use • Length: 6.5 in (165 mm) • Weight: 4.2 oz (119 g) • CFS-2 Part No.: 46107-M • CFS-2 900 Part No.: 81281
FO-R12
• Removes outer jackets from 12 count fiber ribbons • Factory set, requires no adjustment • Prevents scratching or nicking of optical fibers • All cutting surfaces are precision formed, hardened, tempered and ground • Tools for other fiber counts available upon request • Made in the U.S.A. • Length: 5.375 in (136.53 mm) • Weight: 2.5 oz (71 g) • Part No.: 80745 Phone: 860-635-2200 76
TELECOM
Fiber Ribbon Access Tool
STR
• Easily opens/separates the steel tape armor on fiber optic cable • Unique counter rotation mechanism opens steel tape armor in 2 1/2 – 3 1/2 turns allowing for cutting of the armor • Accomodates steel tape armor from 1–2 mm OD • Neodymium rare earth magnet holds tool halves together making operation easy • Tool totally heat treated for long life • Screw clamps are high-strength alloy steel • 1.5 in. (38.1 mm) outside diameter fits comfortably in your hand • Dimensions: Diameter 1.5 in. x .82 in. (38.5 mm x 20.7 mm) • Weight: 9.0 oz (258 g) • Part No.: 81161
IET
Insertion–Extraction Tool
• Easily inserts and extracts fiber optic connectors in high density patch panels • Works with LC and SC simplex and duplex connectors as well as MU, MT-RJ and other similar types • Tool tip design insures positive gripping without slipping • Spring loaded tool action and ergonomic grips allow easy, comfortable and precise left or right hand operation • Dimensions: 8.75 in. x 2.75 in. x .75 in. (222.86 mm x 70 mm x 19.1 mm) • Weight: 3.49 oz (99 g) • Part No.: 80860
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Steel Tape Remover
77 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
ACS / ACS-2 / ACS-K
CommScope® Mid-Span Entry Tool
Phone: 860-635-2200 78
TELECOM
• Especially designed to mid-span access CommScope® BrightPath Self Support Figure 8 Outdoor Fiber Drop Cable • Tool has two precise shaving channels, one to remove the outer MPDE jacket and one to access the 4 mm buffer tube fibers • Fixed control of blade cutting depth and angle protects fibers from damage • Cable is easily inserted and removed by opening and closing spring loaded tool halves with a convenient and quick turning thumb screw • Replacement Blade for jacket and 4 mm buffer tube is Part No. 37048 (CB229) • Length: 3.75 in. (95 mm) • Weight: 6.8 oz (193 g) • Part No.: 42555
ELECTRONICS
BrightPath EMS 6.6 / 4.0
ELECTRICAL
• Professional grade tool ideal for slitting the corrugated copper, steel or aluminum armor layer on Fiber Feeder, Central Tube, Stranded Loose Tube fiber optic cables and other armored cables • Versatile design allows jacket or shield slitting on non-fiber optic cables as well • Tool slits outer polyethylene jacket and armor in one operation –P erforms longitudinal slitting and circumferential (ringing) for end stripping –B lade rotates 90 degrees by activating blade lever, allowing easy mid-span preparation (ringing and slitting) • ACS is adjustable from 0.315 in. (8 mm) to 1.125 in. (28.6 mm) cable O.D. • ACS 2 is adjustable from 0.157 in. (4 mm) to .393 in. (10 mm) for smaller cable O.D. options • Adjustable blade depth to 5.5 mm maximum to accommodate different cable jackets • Cable guide wheel provides cable stability and allows for easier tool movement along the cable • Rugged anodized aluminum and steel construction • Cable guide wheel for smaller cable sizes can be ordered separately • ACS Part No.: 37880 • ACS-2 Part No.: 37897 • ACS-K Part No.: 37899 includes ACS-2 tool, cable guide wheel and bearing • Made in the U.S.A. • U.S. Patent Nos.: D505, 056S • Replacement blade: Part No.: 37884 (CB 251-K) • Height: 5 in (127 mm) • Weight: 10 oz (284 g)
FIBER OPTICS
Armored Cable Slitter
FDS
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Fiber Drop Stripper • • • • • • • •
Designed for stripping Flat Drop Fiber Cable used in FTTH “Fiber to the Home” applications ONE STEP stripping action that removes the jacket in two locations top and bottom to expose the dielectric strength members while allowing the quick removal of the jacket Tool is small and has a lightweight polymer body for ease of use Easily strips Flat Drop lengths of 2-15 feet plus ONE TOOL ONLY - FDS will strip Flat Drop Fiber Cable on the cables listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: 860-635-2200 U.K.: 44-1384-400070 Made in the U.S.A. Replacement Blade Part No.: 37048 (CB229) Length: 3.75 in (95mm) • Weight: 6.8oz (193g) Drop Cable Manufacturer
Stripping Channel
CommScope® A Corning A Draka/Comteq A OFS A Berk-Tek B Prysmian B Sumitomo B Superior Essex B
FDS-2-3MM
Fiber Drop Stripper & Buffer Tube Slitter • • • • • • • • • • •
Multi-purpose tool designed for stripping Flat Drop Fiber jacket and accessing 2 mm and 3 mm buffer tubes on (FTTH) “Fiber to the Home” applications Three individual stripping channels in one compact tool body for jacket removal and 2 mm and 3 mm buffer tube slitting Lightweight polymer body T-bar handle grip design for extra ease of jacket stripping Tool can be used with Flat Drop Fiber manufacturers listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: 860-635-2200 U.K.: 44-1384-400070 Made in the U.S.A. Jacket Replacement Blade Part No.: 37048 (CB229) Buffer Tube Replacement Blade Part No.: 1 set 80794 (two blades) with 1/16 in. Allen Wrench (Note: 2 each CB229 (P/N37048) and two sets of 80794 required to replace all the blades on the FDS-2-3MM) Length: 3.75 in. (95mm) • Weight: 6.8oz (193g) Part No.: 42770 Drop Cable Manufacturer
Stripping Channel
CommScope® A Corning A Draka/Comteq A OFS A
79 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
MSAT
Mid-Span Access Tool
Mid-Span Access Tool Allows easy mid-span access to optical fibers in loose buffer tubes Access tube sizes from 1.9 mm to 3.0 mm Shaves precise opening to prevent fiber damage Sizing channels to easily determine tube size Locking mechanism ensures tool will remain closed through the entire shaving operation Replacement Blade: Part No.: 80935 (5 blades – 2 screws) Made in the U.S.A. Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm) Weight: 1.36 oz (38.5g) Part No.: 80930
Phone: 860-635-2200 80
TELECOM
• • • • • • • • • •
ELECTRONICS
MSAT 5
ELECTRICAL
Quickly and easily access fibers in 2, 2.5 and 3 mm buffer tubes in a mid-span location without fiber damage All blades precisely factory mounted in tube slitting channels with no adjustment required by the installer Tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube slitting channel Convenient spring loaded lever opens and closes the tool and lever becomes flush with the top of the tool body when closed For use with the following diameter buffer tubes: 2.0 mm 1.8-2.2 mm (0.071 in.- 0.086 in.) 2.5 mm 2.3-2.8 mm (0.090 in.-0.110 in.) 3.0 mm 2.8-3.2 mm (0.110 in.- 0.126 in.) Made in the U.S.A Replacement Blade: Part No: 80794 includes 1 blade set (2 each) and 1/16 in. Allen wrench Same blade part No. for all three tool channels Length: 2.5 in. (63.5 mm) Weight: 8oz (226.7g) Part No.: 80785
FIBER OPTICS
• • • • • • • • • • •
FTS
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Fiber Tube Scorer • Precise one-step buffer tube scorer • Unique design easily scores buffer tube sizes from 1.6 mm to 6.0 mm, eliminating multiple tools • Factory fixed hardened carbon steel blade requires no blade adjustment • Body made of strong resilient acetal polymer • Made in the U.S.A. • Dimensions: 3.75 x .625 in. (95.53 mm x 15.92 mm) • Weight: 1oz (28g) • Part No.: 80980
400
Fiber Buffer Tube and Drop Cable Slitter • For mid-span and end slitting of fiber buffer tubes and fiber drop cable • Different models available matched to the size of buffer tube or drop cable to be prepared • Dual blade design • Self closing for safety • Latch locks tool closed • Comfortable soft plastic grips • Made in the U.S.A. • Replacement Blade Part No.: 80235 (two blades per package) • Length: 6.5 in. (165 mm) • Weight: 9.0 oz (255 g)
Model Part No. Tube Size Color (mm OD) (inch OD)
400 - 1.8 mm 400 - 2.2 mm 400 - 2.5 mm 400 - 3.0 mm 400 - 3.3 mm 400 - 3.5 mm 400 - 4.0 mm 400 - 4.5 mm 400 - 5.0 mm 400 - 6.0 mm *400 - Drop A
80950 80951 80952 80953 80954 80955 80956 80957 80958 80959 80960
1.6 - 1.8 2.0 - 2.2 2.3 - 2.5 2.6 - 3.0 3.0 - 3.3 3.3 - 3.6 3.7 - 4.1 4.2 - 4.5 4.6 - 5.1 5.6 - 6.0 4.4 x 8.2
0.063 - 0.071 0.079 - 0.087 0.091 - 0.098 0.102 - 0.118 0.118 - 0.130 0.130 - 0.141 0.145 - 0.161 0.165 - 0.177 0.181 - 0.201 0.220 - 0.236 0.173 x 0.323
Copper Red Blue Green Green Yellow Grey Beige Dark Brown Dark Blue Gold
* 405 – Drop A for OFS, CommScope, Corning, Draka/Conteg, OFS, Prysmian and Sumitono cable
81 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
400 Series Guide Block Sets Fiber Buffer Tube and Drop Cable Slitter Part No.
Guide Block Set
Tube Size
Color
(inch OD)
80835-001 80835-002 80835-003 80835-004 80835-005 80835-006 80835-007 80835-008 80835-009 80835-010 80835-011
1.6 - 1.8 2.0 - 2.2 2.3 - 2.5 2.6 - 3.0 3.0 - 3.3 4.4 x 8.2 3.3 - 3.6 3.7 - 4.1 4.2 - 4.5 4.6 - 5.1 5.6 - 6.0
0.063 - 0.071 0.079 - 0.087 0.091 - 0.098 0.102 - 0.118 0.118 - 0.130 0.173- 0.323 0.130 - 0.141 0.145 - 0.161 0.165 - 0.177 0.181 - 0.201 0.220 - 0.236
Copper Red Blue Green Purple Gold Yellow Grey Beige Dark Brown Dark Blue
8.5 mm
80835-013
8.1 -8.5
0.319 - 0.335
Orange
400 Series Kit
ELECTRICAL
(mm OD)
1.8 mm 2.2 mm 2.5 mm 3.0 mm 3.3 mm Drop A 3.5 mm 4.0 mm 4.5 mm 5.0 mm 6.0 mm
FIBER OPTICS
Model
Fiber Buffer Tube and Drop Cable Slitter
ELECTRONICS
• For mid-span and end slitting of fiber buffer tubes and fiber drop cable • Interchangeable color coded head blocks matched to buffer tube or drop cable size • Blade depth precision factory set and can be field adjusted if required • Dual blade design • Self closing for safety • Latch locks tool closed for ease of use when performing mid-span slitting preparation • Comfortable plastic grips • Made in the U.S.A. • Replacement Blade Part No.: 80235 (2 required) • Kit Dimensions: 11.5 x 8.25 x 2.5 in. (292 x 210 x 63.5 mm) • Kit Weight: 2.04 lbs (925.3 g)
TELECOM Phone: 860-635-2200 82
Kit Part No.
Guide Blocks Included
80830
2.5 / 3.0 / 4.4 x 8.2 mm
80830-001
2.2 / 2.5 / 3.0 mm
80830-002
1.8 / 2.2 / 2.5 / 3.0 / 3.3 mm
80830-007
400 - 8.5 mm
80830-009
400 - 5.3 mm
80830-010
400 - 6.0 mm
80830-016
400 - 3.5 mm
80235-1
Replacement Blade (two blade package)
80235-10
Replacement Blade (10 each)
ELECTRICAL
FIBER OPTICS
400 Series Kit
RBT
TELECOM
ELECTRONICS
Riser Break-out Tool • For use in FTTH –MDU (Multiple Dwelling Units) as well as other riser cable applications • Preparation tool especially designed to shave a break-out window in riser cable with no fiber damage while allowing individual fiber extraction • Tool is compact and lightweight and has rugged aluminum body design • Allows easy and fast access to closely spaced riser cables especially in small confined areas • Compact and thin profile tool design allows for ease of use when riser cable is surface mounted, without the need for separating it from the mounting surface • Shaves a longitudinal break-out window in 8.5 mm, 10.5 mm and 14 mm O.D. riser cables without any time consuming tool adjustment • Factory fixed shaving blade made of high carbon steel is safely recessed away from installer’s hand to minimize exposure • Applicable cables listed in the following table - please contact Customer Service for other cables U.S.: 860-635-2200 U.K.: +44-1384-400070 • Made in the U.S.A. • Tool Dimensions: 4 in. x 1.5 in. x 5/8 in. (100 mm x 38 mm x 17 mm) • Weight: 3.68oz (105g) • Replacement Blade: Part No: 81320 includes 10 blades, two spare mounting screws and washers • Part No.: 81315
83 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
FOKC
Fiber Optic Kevlar® Cutter FIBER OPTICS
• Designed to cut Kevlar® strength members in fiber optic cables • Powerful quick cutting action • Full serrated edge for consistent, fast and clean cuts • Lightweight and compact • Return spring designed for precise repeated cuts • Ergonomic handles with cushioned non-slip grips • Made of high carbon steel specially treated for long life and trouble free cuts • Length: 5.75 in. (146 mm) • Weight: 2.5 oz (72 g) • Part No.: 36495
ELECTRICAL
86 1/2SF
Electronics/Kevlar® Shears
TELECOM
Phone: 860-635-2200 84
ELECTRONICS
• 86 1/2SF is a high-leverage tool for cutting, trimming and slicing through fibers and other tough industrial and electronics material • Use to cut and trim wire insulation materials, copper leads, filament wire, and nickel-ribbon • Use 86 1/2SF to trim DuPont Kevlar® Aramid fibers • Hot-forged, high carbon steel for long life • Quick action spring response and two sharp points • 86 1/2SF has one blade serrated and yellow cushioned grips • Length of cut: 0.63 in. (16 mm) • Made in the U.S.A. • Length: 6.5 in. (165 mm) • Weight: 4.8 oz (136 g) • Part No.: 46331 86 1/2SF • Part No.: 46339 86 1/2S NO grips
KS-1
• Lightweight shears ideal for cutting Kevlar® strength members found in fiber optic cable construction • Ergonomic molded handles provide comfort for both right and left handed users • One micro-serrated blade reduces slippage for more positive cutting action • Blades made from high carbon molybdenum, and vanadium steel for long life • KS-1 available with nylon pouch with belt loop (Part No.: 80665) • Nylon pouch only (Part No.: 80669) • Length: 5.5 in. (140 mm) • Weight: 2.8 oz (79 g) • Part No.: 80671
KC699
Kevlar® Shears • Oversized molded handles for operator comfort • Blades are hardened stainless steel with a fine serration on one blade to grip Kevlar® fibers and prevent slipping while cutting • Ambidextrous handles for right- and left- hand use • Length of cut: 2.5 in. (64 mm) • Length: 7.25 in. (184 mm) • Weight: 1.6 oz (45 g) • Part No.: 46175
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Kevlar® Shears
85 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
DS-60-C, DS-90-W
Diamond-Tip Fiber Optic Scribe FIBER OPTICS
• Quality fiber optic scribes featuring a protective retractable barrel with pocket clip and a stainless steel mounted diamond tip in your choice of conical or wedge shapes • These scribes are specially made for the “scratch and pull” technique of scribing optical fiber. The wedge shape provides a more durable edge • Made in the U.S.A. MODEL DESCRIPTION FULL LENGTH PART NO. 60° Cone Angle-Diamond Tip Retractable Scribe 90° Wedge-Diamond Tip Retractable Scribe
5.375 in. / 137 mm 46137 5.375 in. / 137 mm 46140
CS-30-W
Carbide-Tip Fiber Optic Scribe
MODEL
DESCRIPTION
FULL LENGTH
PART NO.
CS-30-W
30° Wedge-Carbide Tip
4.375 in. / 112 mm
46124
ELECTRONICS
• The CS-30-W is a 30-degree wedge-tip carbide scribe 3.8 mm wide for long life and simple fiber termination • Housed in a rugged, anodized aluminum casing 112 mm long and 25 mm in diameter, the CS-30-W fits comfortably in either hand and in your pocket or tool kit • The CS-30-W includes a convenient pocket clip and soft, brightly colored, protective “Squeeze and Pull” cap for easy and quick tool selection • Made in the U.S.A.
ELECTRICAL
DS-60-C DS-90-W
CS-30-DE
Double End Carbide Fiber Optic Scribe
MODEL
CS-30-DE
DESCRIPTION
FULL LENGTH
PART NO.
3/16 in. (5 mm)
5-1/4 in. (133 mm)
46123
Phone: 860-635-2200 86
TELECOM
• Reversible 30 degree angled carbide blade edged on both ends to double the life of the tool • 5 mm wide blade wider than conventional scribe blades for greater visibility • “Soft feel” grip on rugged anodized aluminum casing • Hex-shaped end to prevent scribe from rolling off work table • Plastic cap protects blade when tool is not in use • Convenient pocket clip • Carbide Blade Replacement Part No.: 46122 • Made in the U.S.A.
FOC-SS
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Fiber Optic Cleaver • Designed for fiber cleaving applications that include field termination of fiber connectors and mechanical splices as well as laboratory applications • Small, lightweight and easy to use • Features a graduated leaf spring scale, which allows cleave lengths of 2.0 mm to 20.0 mm • The “Score and Snap” leaf spring function is easy, fast and is the preferred method by many fiber installers • Produces a precise cleave endface angle of less than 2 degrees • Supplied with a standard carbide cleaving blade capable of over 6,000 consistent cleaves • Cleaving tool is designed for single mode and multimode fiber with cladding O.D. diameter of 125 micron with no operator tool adjustments • Cleaver and instructions come in a 2.12 oz (60g) hard plastic case that measures 5.38 x 3.38 x 1.13 in. (137 x 86 x 29 mm) • Cleaver Dimension: 4.88 x 0.79 x 1.57 in. (124 x 20 x 40 mm) • Weight: 2.12 oz (60g) • Fiber Optic Cleaver: FOC-SS Part No.: 46490 • Leaf Spring Replacement: FOC-LS Part No.: 46492 • Carbide Blade Replacement: FOC-CBL, Bladelife scores – 6,000* Part No.: 46491 • Diamond Blade Replacement: FOC-DBL, Bladelife scores – 10,000* Part No.: 46493 • Made in the U.S.A. * Based on no damage or chipping to blade
RMC-6 TELECOM
Ruler
• Precision quality stainless steel 6 in. (150 mm) ruler • Sliding clip for pocket attachment and depth gauge use • One ruler side indicates inches and mm and one side indicates 64th and mm conversions • Ideal addition for fiber kits as well as other specialty tool kits • Made in the U.S.A. • Weight: 1.0 oz (28 g) • Length: 6.4 in. (163 mm) • Part No.: 80683 87 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
CC125
Fiber Optic Cleaver FIBER OPTICS
• Produces extremely precise cleave lengths from 6.5 mm to 20 mm • Produces endface angles of less than two degrees 100% of the time • Ideal for achieving the precise cleaves required by the new generation of “no polish” fiber connectors — in either simplex or duplex cables • Tremendous repeatability — once the cleave length is set and locked, every cleave will be the same precise length • Steel handles with plastic grips • Anodized aluminum cleaving blocks / fixturing • Carbide cleaving blade • Polyurethane rubber cleaving and gripping pads • Compatible Fibers: – Glass fibers with 125-micron nominal cladding diameters • Made in the U.S.A. • Length: 5.125 in. (130 mm) • Width: 1.75 in. (45 mm) • Height/Thickness: 1.5 in. (38 mm) • Part No.: 46092
ELECTRICAL ELECTRONICS
Fiber Optic Crimp Tool • Ratcheting action crimp tool for positive, full cycle crimping of fiber optic connectors • Rugged steel frame • Interchangeable jaws • Several common fiber optic hex and oval jaws available • Length: 8.6 in. (218 mm) • Weight: 1.1 lb (500 g)
1 39840-1 .043
.068, .100, .137, .213, .255
39844
2 39840-2 .042
.068, .078, .128, .151, .178
39845
3 39840-3 .042 .068 4 39840-4 .042
.133, .162, 39842 .195
.068, .151, .178, .213
39843
Phone: 860-635-2200 88
TELECOM
With Jaw Jaw Set Only Set # Part No. Square Hex Sizes Oval Sizes Part No.
FIBER OPTICS
• Available in magnification strengths of either 200x or 400x • Achromatic glass objective for excellent image quality • Focus wheel for proper focus at all times • Universal 2.5 mm adapter for nearly all ST, SC and FC connector ferrules included as standard, optional LC, SC/APC, E2000/APC and SMA adapters available • Integrated laser safety filters (not intended for viewing lit fibers) • Coaxial Illumination by LED light giving up to 100,000 lamp hour life and extended battery life • Side illumination port allows back lit inspection of jumpers and can be used as a fault finder • Body of durable aluminum comes in soft padded storage case • Takes 3 AAA batteries (included) • Universal 2.5 mm Adapter: Part No.: 80768 • LC Adapter: Part No.: 80765 Universal 1.25 Adapter • SC/APC 2.5 mm (8º) Adapter: Part No.: 80766 Universal 2.5 APC Adapter • SMA Adapter: Part No.: 80767 • Length: 9 in. (230 mm) • Weight: 1.2 lbs (550 g) without case • 200x Part No.: 80760 • 400x Part No.: 80761
TELECOM
ELECTRONICS
ELECTRICAL
Fiber Optic Inspection Microscope 200x / 400x
89 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
Fiber Optic Polishing Disc
ELECTRICAL
• High quality hand polishing disc for fiber optic connectors • “Universal” design fits most 2.5 mm ferrule connectors including: ST, SC and FC connectors • Inside and outside rims designed for improved hand positioning while performing the polishing operation • Channeled, raised base allows debris to escape easily and provide for easy polishing action • High quality, precision machined stainless steel design for long life • Diameter: 1.94 in. (49.2 mm) • Weight: 1.5 oz (43 g) • FOPD-25 Part No.: 80688 • FOPD-LC also available (aluminum disc for 1.25 mm ferrule LC connectors) (Part No.: 80754) • FS800 is 1.5 in. diameter plastic disc designed for most 2.5 mm ST, SC and FC connectors (Part No.: 46167) • FS900 is 1.5 in. diameter stainless steel disc for 2.5 mm connectors (Part No.: 46169)
FIBER OPTICS
FOPD-25, FOPD-LC, FS800, FS900
FOPD-25
FOPD-LC
ELECTRONICS
FS900
FS800
TELECOM Phone: 860-635-2200 90
FO-VFL
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Fiber Optic Visual Fault Locator • Slim pen style 650 nm red visible laser diode fault locator for single and multimode fiber • Designed for field personnel who need an efficient and economical tool for fiber tracing, fiber 1.25 mm Adapter routing, and continuity checking in an optical network, during, and after installation • Detects fiber breaks, fiber leaks, stress points and faulty connectors • Features a universal connector accepting any optical connector style with 2.5 mm ferrule such as FC, SC, ST, E2000, and APC • LED indicates function status, such as ON and OFF of laser, continuous laser mode, pulse laser mode, and low battery • Includes two 1.5V AAA batteries, cushioned vinyl carrying case, lense cap, and instruction sheet • Additional power button prevents accidentally activating the laser and draining the batteries • Average laser life is approximately 3000 hours • Maximum output power is 5 mW • Minimum coupled power is 0.5 mW • 1.25 mm Adapter Only (Part No. 80911) • For single mode up to 7 km, for multi-mode up to 3 km • Laser class 3A • CE, RoHS compliant
CCT-2001
Fiber Continuity Tester • Provides a high intensity, long-lasting RED LED light source that transmits light instantly and accurately down the fiber • Designed for field use and provides a simple inexpensive check of fiber continuity • Compatible with both single mode and multimode fiber • Compatible with almost all types of connectors including ST, FC, SC, LC and MT-RJ connectors • Includes 1.25 mm Universal, 2.5 mm Universal and MT-RJ style interchangeable adapters • Uses (3) each LR41 or AG3 batteries (included) • Part No.: 46097
91 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
FIBER OPTIC POLISHING KIT FIBER OPTICS ELECTRICAL
Complete kit includes: • Clear Lexan® polishing plate • Neoprene polishing pad • Universal plastic polishing puck • Universal stainless steel polishing puck • 12 micron polishing film – 10 included • 3 micron polishing film – 10 included • .5 micron polishing film – 10 included • Lint-free cleaning wipes – 25 included • Pre-saturated bifurcated swipes – 10 included
DESCRIPTION
DIMENSIONS
PART NO.
PK2000
Fiber Optic Polishing Kit – Complete
L: 14-3/8 in.; W: 9-1/2 in.; D: 2-3/8 in. 365 mm x 241 mm x 60 mm
46277
L: 13 in.; W: 9 in.; D: 1/4 in. 330 mm x 229 mm x 6 mm
46163
FS600 Fiber Optic Polishing Plate – Lexan® Fiber Optic Polishing Pad – Neoprene
H: 5-1/2 in.; W: 5-1/2 in.; D: 1/8 in. 140 mm x 140 mm x 3 mm
46165
FS800
Fiber Optic Polishing Puck – Plastic 2.5 mm
Diameter: 1-1/2 in. / 38 mm
46167
FS900
Fiber Optic Polishing Puck – Stainless Steel 2.5 mm
Diameter: 1-1/2 in. / 38 mm
46169
PFA0-.5
Fiber Optic Polishing Film Aluminum Oxide .5 micron Color: White
3 in. x 6 in. 76 mm x 152 mm
46273
PFA0-3
Fiber Optic Polishing Film Aluminum Oxide 3 micron Color: Yellow
3in. x 6 in. 76 mm x 152 mm
46275
PFA0-12 Fiber Optic Polishing Film Aluminum Oxide 12 micron Color: Red
3 in. x 6 in. 76 mm x 152 mm
46274
F1000
Fiber Optic Cleaning Wipes
3 in. x 4 in. / 76 mm x 101 mm
46143
FS400
Bifurcated Swipes
4-1/4 in. / 108 mm
46161
Also available: Diamond Polishing Film No. PFD-3, 5 in. (127 mm) Round; Color: Rose
Phone: 860-635-2200 92
TELECOM
FS700
ELECTRONICS
MODEL
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
FIBER-SAFE™ SAFETY KIT • Fiber-Safe™ safety kit is specifically for working safely with glass fiber. • Complete kit includes a Fiber-Safe polishing / work mat, fiber scraps trash can, splinter removal tweezer, ten bifurcated cleaning swipes, each with a self-contained alcohol dispensing tube, and safety glasses. • Kit items can also be purchased separately • Part No.: 80875
MODEL DESCRIPTION
DIMENSIONS
FS9500
Fiber Optic Safety Kit - Complete
L: 16.5 in.; W: 3.5 in. / 42 cm x 9 cm
46171
FS100
Polishing/Work Mat (Black)
L: 22 in.; W: 14 in. / 56 cm x 5.5 cm
46154
FS200S
Fiber Scraps Trash Can
H: 4 in.; W: 2.25 in. / 10 cm x .7 cm
46157
FS300
Safety Glasses
N/A
46159
FS400
Bifurcated Swipes - 10 included
L: 5 in. / 12.7 cm
46161
FS500
Fiber Splinter Removal Tweezers
L: 4.25 in. / 10.8 cm
46162
MDP-8
Miller Dispensing Pump
• Oval (Euro Style) container design with rectangular bottom for stability • Polypropylene Twist-lock pump provides leak-free seal for travel and is ideal for use in a fiber kit • Use with isopropanol for proper cleaning of fiber during the cable preparation • One handed pump operation frees up user’s hands • Made in the U.S.A. • Container not supplied with liquid • Dimensions: 2.9 x 5.5 x 2.4 in. deep (74 x 140 x 61 mm deep) • Capacity 8 oz (250 ml) • Weight 1.8 oz (51 g) • Part No.: 80870
93 www.ripley-tools.com
PART NO.
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
MDP-4
Miller Dispensing Pump
FIBER OPTICS
• Square HDPE 4 oz (118 ml) container provides stability and offers stainless steel pump • Use with Isopropanol for proper cleaning of fiber during the cable preparation • One handed pump operation frees up user’s hands • Cam-lock hinge keeps lid open and closed to reduce odors • Pump design with purity protector prevents fluid from reentering the bottle • Each touch of the pump dispenses approximately 2cc of liquid • Made in the U.S.A. • Container is not supplied with liquid • Dimensions: 3.1 x 2.1 in. (79 x 54 mm) • Weight: 2.3oz (65g) • Part No.: 80875
ELECTRICAL
100
Adjustable Wire Stripper & Cutter ELECTRONICS
100
101-S
Phone: 860-635-2200 94
TELECOM
• Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) • Effective for stripping / scoring fiber optic jackets and buffer tubing • Stop screw adjusts easily to fit wire size • Ground and unground cutting surface versions available • Soft plastic coated handles • Length: 5.125 in. (130.18 mm) • Weight: 2.5 oz (71 g) • Also available with opening spring and closing lock feature (Model #101-S) • Model 100 Part No.: 80300 • Model 100 Part No.: 80300-30 Ground Cutting Surface • Model 101-S Part No.: 80305 • Model 101-S Part No.: 80305-30 Ground Cutting Surface
ELECTRICAL
FIBER OPTICS
103-S
Adjustable Wire Stripper & Cutter with cam adjustment • Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) • Cam adjusts easily to fit wire size • Pressure is against the cam not on the set screw • Opening spring and closing lock feature • Ideal for all applications • Ground and unground versions available • Soft plastic coated handles • Made in the U.S.A. • Length: 5.375 in. (136.53 mm) • Weight: 2.5 oz (71 g) • Model 103-S Part No.: 80315 • Model 103-S Part No.: 80315-30 Ground Cutting Surface
111-TAS
TELECOM
ELECTRONICS
Thumb Adjustable Wire Stripper & Cutter • Effective for stripping & cutting insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) • Scalloped handles ergonomically designed for ease of use and optimum operator comfort • Patented mechanism allows for full range adjustment • Finger operated stop, adjusts easily for manual adjustment of jaws without additional tools • Unique spring mechanism holds the jaws and stripping surfaces in a normally open position, permitting ease of operation in repetitive stripping applications • Once set, the operating pressure is encapsulated between the cam and pivoting tool arm, allowing for maximum operator leverage • All cutting surfaces are precision formed, hardened, tempered and ground assuring clean smooth strips • Length: 5.4 in. (137 mm) • Weight: 2.2 oz (62 g) • Part No.: 80735
95 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
RCS-114, RCS-158
ELECTRICAL ELECTRONICS
• Two tools designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets • Fiber Optic cables - excellent tool for precise jacket stripping of fiber optic multi-fiber cables • RCS-114 for smaller diameter cables: 0.178 to 1.14 in. (4.5 - 29 mm) • RCS-158 for larger diameter cables: 0.75 to 1.58 in. (19 - 40 mm) • Rotary cut to a longitudinal cut along the cable length for end stripping • Spiral cut for end stripping and mid-span stripping • Spiral cutting features provides easier removal of harder jackets • Spring-loaded cable brace firmly secures cable to the blade for controlled cutting action • Comfort and ergonomic design for ease of use and storage • Long life blade design • Blade depth can be regulated by simply turning the blade housing • Blade housing is PTFE coated, for smooth, low effort stripping • Replacement blade (RCS-114 and RCS-158): CB231 (Part No: 37150) • Length: RCS-114 - 5.43 in. (138 mm) RCS-158 - 6.02 in. (153 mm) • Weight: RCS-114 - 3.5 oz (100 g) RCS-158 - 3.84 oz (110 g) • Part No.: 37140 (RCS-114) • Part No.: 37145 (RCS-158)
FIBER OPTICS
Round Cable Strippers
RCS-158
TELECOM
RCS-114
Phone: 860-635-2200 96
MK02, MK02M
ELECTRICAL
FIBER OPTICS
Round Cable Strippers
• Cable stripper for outer jackets & insulations from 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D. • Stripping action is both circumferential, then longitudinal for removal of insulation section at the end or mid span of wires • Adjustable depth up to 0.12 in. (3 mm) cutting depth • Spherical blade for softer insulation is standard; chisel point blade for harder coverings is optional • MK02 has handy spring-loaded hook ripping blade at base of tool to facilitate insulation removal • MK02M functions the same as the MK02 but does not contain the spring-loaded hook ripping blade • Solid construction for rugged applications • MK02 Part No.: 39390 • MK02M Part No.: 39490 Specifications • Stripping Capacity – 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D. • Replacement Blades: – Spherical cutting blade (set of 5) – 39391 – Chisel point blade (set of 5) - 39392 • Weight: 4.2 oz (120 g) • Dimensions: 5.3 x 1.6 x 0.6 in. (135 x 40 x 15 mm) MK02
TELECOM
ELECTRONICS
MK02M
97 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
MK01DA
Outer Jacket Cable Stripper
Application
Cable Stripping
Wire Size, mm O.D.
Wire Size, Inches O.D.
8 mm to 33 mm
0.31 in. to 1.5 in.
• Replacement Blade: Part No.: 39381 • Weight: 159 g (5.6 oz) • Length: 163 mm (6.4 in.) closed • Part No.: 39922
ELECTRICAL
FIBER OPTICS
• Designed for precision stripping of a variety of insulation types including rubber, PVC, nylon and cotton • Also recommended for cutting copper screening of coaxial cables from 8 to 38 mm (0.31 to 1.5 in.) • Adjustable blade depth up to 4.5 mm (0.18 in.) • Blade depth setting can be locked to assure consistent repetitive operations • Adjustable hook head allows for variation in blade force for harder materials • Stripping action is circumferential, longitudinal and spiral for removal of jacket and insulation
MK04
Cable Jacket Stripper ELECTRONICS
• Cable stripper for outer jackets & insulation on large diameter cables • Heavy duty construction for industrial environments • Rotary cut to a longitudinal cut along the cable length for end stripping • Spiral cut for end stripping • Spiral cut for mid-span stripping • Spiral cutting feature provides easier removal of soft jackets and on larger cables • Adjustable blade up to 0.20 inches (5 mm) cutting depth • Blade depth setting can be locked to assure consistent repetitive operations • Roller support of cable for smooth stripping action • Wheel blade applications available – contact Customer Service for sizes and applications U.S.: 860-635-2200 U.K.: 44-1384-400070 Cable Size Range In. O.D.
Cable Size Range mm O.D.
Part No.
0.79 in. to 2.36 in.
20 to 52
39376
MK04
• Replacement Fixed Blade Assembly: Part No.: 39379 • Replacement Fixed Blade Cartridges (FC2) Part No.: 39377 for larger O.D. cable & (FC3) Part No.: 39378 for smaller O.D. cable • Weight: 1.5 lbs (680 g) • Size: 3.7 x 1.7 (head) x 9.8 in. (95 x 42 x 250 mm) Phone: 860-635-2200 98
TELECOM
Model
721, 821 & 921
• 721 strips and cuts 22-10 AWG (0.6-2.6 mm) wire sizes • 821 strips and cuts 26-16 AWG (.40-1.3 mm) wire sizes • 921 strips and cuts 30-20 AWG (.25-.80 mm) wire sizes • AWG/mm wire sizes embossed/pad printed on tool • Cushion grips for comfort • Serrated plier-type nose for wire pulls and loops • Handle lock mechanism for compact and protective storage for ease of use with pouch • Wire looping / bending holes conveniently located • Automatic return spring for ease of use and speed • Compact and lightweight with narrow nose design • Black oxide finish for extra corrosion protection • All cutting surfaces are precision formed, hardened, tempered and ground, assuring clean, accurate strips • Length: 6.25 in. (159 mm) 721 • Weight: 3.8 oz (107.7 g) • 721 Part No.: 80564 • 821 Part No.: 80568 • 921 Part No.: 44625
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Multi-Wire Strippers / Cutters
821
TELECOM
921
Type 721 821 921 Type 721 821 921
Sizes (mm) 0.6 0.8 1.0 1.3 1.6 2.0 2.6 0.4 0.5 0.65 0.8 1.0 1.3 0.25 0.32 0.4 0.5 0.6 0.8 Sizes (AWG) 22 20 18 16 14 12 10 26 24 22 20 18 16 30 28 26 24 22 20
99 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
PS 1
Self-Adjusting Wire Stripper
Wire Size Range mm2
Wire Size Range Inches O.D. Wire Stripping Up to 1.5 Up to 0.062 Wire Cutting Up to 1.5 Up to 0.062
Approximate AWG wire size Stranded 34-16 Solid 34-14 Stranded 34-16 Solid 34-14
• Replacement Gripping Pads (set of 3): Part No.: 39398 • Weight: 76 g (2.7 oz) • Dimensions: 155 x 80 x 14 mm (6.1 x 3.1 x 0.6 in.) • Part No.: 39765
ELECTRONICS
MK 1F/D
Self-Adjusting Wire Stripper
Wire Size Range mm2
Wire Size Range Inches O.D.
Wire Stripping 0.25 to 2.5 Up to 0.1 in.
Approximate AWG wire size Stranded up to 14 Solid up to 14
• Replacement Stripping Jaw Assembly: Part No.: 39416 • Weight: 240 g (8.5 oz) • Dimensions: 165 x 64 x 16 mm (6.5 x 2.5 x 0.6 in. ) • Part No.: 39415 Phone: 860-635-2200 100
TELECOM
• Designed for high volume, production environments • Strips 0.25 mm2 to 2.5 mm2 PVC insulated wires • Die cast aluminum frame and pressed steel linkages offer a rugged design for production and field use • Automatic, self-adjusting stripping action over entire range • Additional flexibility to adjust for tough or soft insulations, with built-in adjustment dial • Built in strip stop for consistent strip lengths Application
ELECTRICAL
Application
FIBER OPTICS
• Designed to handle PVC insulated small cross-sectional wires up to 1.5 mm2 (0.062 in.) • Lightweight and compact size ideal for small applications • Allows for precise work with less fatigue • Automatic, self-adjusting stripping action over entire range • Built-in strip stop for consistent strip lengths • Built-in cutter for wire end trimming • Supplied with interchangeable gripping pads to suit different types of insulation
PS 2
• Ideal for production line and electronic / electrical maintenance applications • Comfortable fatigue free shape • Fully self-adjusting with built-in wire cutter, adjustable length stop and variable gripping power • Strips wire without damage to conductor • Robust glassfiber reinforced nylon body with hardened and tempered steel moving component parts insures a long, maintenance free life
Application
Wire Size Range mm2
Wire Size Range In. O.D.
Approximate AWG wire size
Wire Stripping
0.08 to 6.00
up to 0.126 in.
22-10 Stranded & Solid
Wire Cutting
Up to 6.00 stranded Copper
up to 0.126 in.
22-10 Stranded & Solid
• Weight: 150 g (5.3 oz) • Dimensions: 180 x 70 x 18 mm (7.1 x 2.8 x 0.7 in.) • Part No.: 39780
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Self-Adjusting Wire Stripper
101 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
NO-NIK®
Wire Strippers FIBER OPTICS ELECTRICAL
• The premier precision wire stripper for removing insulation from solid or stranded wire without nicking or scratching the conductor • Stripping blade diameters range from 0.008 in. to 0.054 in. (.203 mm to .323 mm) • Stripping apertures are accurate to -0 in, + 0.0005 in (.0127 mm) • Simple operation • Insulation being removed protects conductor from the stripping blades • No adjustments needed; each tool is made to strip specific wire sizes • Handles are color-coded to tool size for easy identification • Stripping Blade Diameter Marking and Indicating Arrow: – Stripping blade diameter clearly marked on plastic head. Arrow indicates direction pressure should be applied when stripping • Made in the U.S.A. • Length: 5.3 in. (135 mm) • Weight: 1.6 oz (45 g)
®
NN018
ELECTRONICS
NN016
NN014
Phone: 860-635-2200 102
TELECOM
Please see Wire Stripper Selection Chart on next page.
Nominal Conductor Part Cutting Handle Wire Diameter Model No. Diameter* Color AWG Construction in. mm
NN044 46215 NN054 46217 NN034 46211 NN037 46213 NN037 46213 NN044 46215 NN028 46206 NN031 46209 NN031 46209 NN034 46211 NN023 46202 NN025 46204 NN025 46204 NN028 46206 NN018 46198 NN021 46200 NN021 46200 NN023 46202 NN014 46194 NN016 46196 NN016 46196 NN018 46198 NN012 46192 NN014 46194 NN014 46194 NN016 46196 NN010 46190 NN012 46192 NN010 46190 NN012 46192 NN008 46188 NN010 46190 NN010 46190 NN008 46188 NN008 46188
.044 .054 .034 .037 .037 .044 .028 .031 .031 .034 .023 .025 .025 .028 .018 .021 .021 .023 .014 .016 .016 .018 .012 .014 .014 .016 .010 .012 .010 .012 .008 .010 .010 .008 .008
Dark Brown 18 Clear Pink Grey 20 Grey Dark Brown Black Tan 22 Tan Pink Maroon Light Green 24 Light Green Black Yellow Royal Blue 26 Royal Blue Maroon Dark Green Orange 28 Orange Yellow White Dark Green 30 Dark Green Orange Light Blue White 32 Light Blue White Red Light Blue 34 Light Blue Red 36 Red
Single Stranded Single Stranded Single
Stranded Single
Stranded Single
Stranded Single
Stranded Single
Stranded Single
Stranded Single
103 www.ripley-tools.com
.0403 .044
1.0236 1.1176
.0320
.8128
.035
.889
.0253
.64262
.028
.7112
.0201
.511
.022
.5588
.0159
.404
.017
.4318
.0126
.014 .0100
.011
.320 .3556 .254 2794
.0080
.2032
.009
.2286
.0063
.160
Stranded
.007
.1778
Single Stranded
.0050 .006
.127 .1524
* Proper selection depends upon type of insulation and insulation construction.
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Wire Stripper Selection Chart
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
60
Utility Cutter FIBER OPTICS
• Cuts stranded wire from #22 AWG (.65 mm) to #12 AWG (2.3 mm) • Utility cutter for plastic, wire and other materials • Perfect for plastic cuffs • Spring mechanism opens tool permitting ease of operation in repetitive functions • All cutting surfaces are precision formed, hardened, tempered and ground • Closing lock feature • Soft plastic coated handles • Made in the U.S.A. • Length: 5.375 in. (136.53 mm) • Weight: 2.5 oz (71 g) • Part No.: 80365
ELECTRICAL ELECTRONICS TELECOM Phone: 860-635-2200 104
95
ELECTRONICS
ELECTRICAL
FIBER OPTICS
Romex® Cable Ripper • The easy way to rip Romex® cable jackets (nonmetallic building electric wire) to expose the conductors • Economical value with professional results • Blade hardened for long wear and is easily replaced • Made in the U.S.A. • Replacement Blade #95 BL Part No.: 080297 • Length: 4.5 in. (114.3 mm) • Weight: 1.5 oz (42.5 g) • Part No.: 80295 • Romex® is a registered trademark of Southwire Company
205
Rural “C” Line Wire Slitter & Stripper • Heads matched to wire diameter • Used by major telephone installers • Slitting and stripping blades are replaceable • Replacement Blades: # 205 SL BL (slitting blade) # 205 ST BL (stripping blade) • Tools are self-closing for safety • Soft plastic coated handles • Made in the U.S.A. • Length: 7 in. (177.80 mm) • Weight: 9.5 oz (269 g)
TELECOM
Model
Part No.
Wire Diameter (in.) (mm)
205 14GA 80250 .062 1.57 205 12GA 80238 .080 2.03
105 www.ripley-tools.com
Replacement Blade
Replacement Blade Part No.
205SL BL 205ST BL
80235 80236-1
205SL BL 205ST BL
80235 80236-4
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
305
Figure-8 Aerial Self Support Duct Slitting Tools FIBER OPTICS
• Messenger removal and jacket slitting tools for round figure-8 aerial duct • Heads matched to messenger sizes • Self closing for safety • Locking latch on MJ and MW tools provides easier slitting action • Replaceable blades • Plastic Grips on handles • Made in the U.S.A. • Length: 6.5 in. (165 mm) • Weight: 9.0 oz (255 g)
Tool Tool Duct Nominal Maximum Replacement Blade Model Part Mfr Duct Messenger Blade Part No. Messenger Covering O.D. No. Size, mm in. 305 AN 305 WEB-B 305-6MW-P6 305-6MW-D6
80255 80260 80631 Pyramid 80241 Duraline
— — 6.6 6.6
.380 - .420 .435 - .450 .400 450
305 BL 305 BL 305 Hook 305 Hook
80235 80235 80244 80244
305-6MJ-P6 80640 305-6MJ-AD6 80240
Maximum Duct Messenger Mfr Covering O.D. in. .400 .450
Nominal Replace- Duct ment Messenger Blade Size, mm
Pyramid Duraline, Arnco
6.6 6.6
305 MJ 305 MJ
Blade Part No.
ELECTRONICS
Models for Messenger Jacket Slitting (Slits Messenger Jacket for Removal) Tool Tool Model Part No.
ELECTRICAL
Models for Messenger Web Slitting (slits web between messenger and duct)
80639 80639
TELECOM Phone: 860-635-2200 106
925CS/925CS-ERGO
ELECTRICAL
FIBER OPTICS
Splicer’s Scissors
• Multi-purpose service tool • All exterior surfaces and interior blade surfaces double-plated with chrome over nickel to prevent rust and corrosion — the ONLY electrician’s scissors that offer this full double protection • Every pair totally thru-hardened for years of service. • Use for splicing wire; cutting harness ties, insulation materials, medium gauge wires, and electrical tape; and stripping insulation. • Stripping notches for 19 and 23 gauge wire • Scraper and file on back of blade • Made in the U.S.A. • Length: 5.25 in (133 mm) • Weight: 3.2 oz (91 g) • Part No.: 46043 925CS-ERGO • ERGO Scissors have the 925CS same quality features as 925CS • Ergonomic design to minimize hand wrist fatigue • Cushioned handle that nests in the palm of your hand for greater cutting leverage • Length: 7.5 in. (190 mm) • Weight: 3.7 oz (110 g) • Part No.: 46046 925CS-ERGO
CK6 ELECTRONICS
Splicer’s Knife • Tough, coping-style blade • Forged steel • Full-Size, high-dielectric, yellow-cushioned handle • Provided with a protective blade sheath • Length: 6.25 in. (159 mm) • Blade length: 1.625 in. (41 mm) • Weight: 2.4 oz (68 g) • Part No.: 46112
925CS KIT
TELECOM
Splicer’s Kit
• Complete Kit Contains: 1 – CSH 96 Holster 1 – 925CS Splicer’s Scissors 1 – CK6 Knife • Kit Dimensions: 8.25 x 2.125 x 1 in. (210 x 54 x 2.54 mm) • Weight: 7.5oz (213 g) • Part No.: 46044 MODEL DESCRIPTION 925CS 925CS-ERGO CK6 925CS Kit
FULL LENGTH LENGTH OF CUT
Stripping notches 19 & 23 AWG 5 in. / 127 mm 1.75 in. / 44 mm and one blade serrated Same as 925CS except with ERGO handles 5 in. / 127 mm 1.75 in. / 44 mm Splicer’s knife 6.25 in. / 159 mm N/A One 925CS Scissor, One CK6 Splicer’s 8.5” in./ 216 mm N/A Knife and one CSH96 Holster
107 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
SPECIALTY SCISSORS FIBER OPTICS
33 1/4 IS4 1/4
384 383 1/2
ELECTRICAL
564C 554
FULL LENGTH
LENGTH OF CUT
PART NO.
4 1/4 in. - 108 mm 3 1/4 in. - 83 mm 3 1/2 in. - 89 mm 4 in. - 102 mm 5 in. - 127 mm 4 in. - 102 mm 4 in. - 102 mm
3/4 in. - 19 mm 1/2 in. - 13 mm 3/4 in. - 19 mm 1 1/4 in. - 32 mm 1 1/2 in. - 38 mm 3/8 in. - 10 mm 3/8 in. - 10 mm
46333 46332 46336 46337 46338 46335 46334
IS4 1/4 33 1/4 (Curved blades) 383 1/2 384 385 554 (Curved blades) 564C (One blade serrated)
Phone: 860-635-2200 108
TELECOM
MODEL
ELECTRONICS
• Precision crafted tools • Perfect for military spec work • Used for cutting harnesses, assembling circuit boards, cutting and tieing laces, and trimming wire for terminals • Needle-sharp points for accuracy and delicate trimming in tight places • Hot-forged fine cutlery steel, double-plated with chrome over nickel, tempered and precision ground for the finest performance • IS4 1/4 is a precise instrument with long blades and needle-sharp points for stripping shielding, and cutting light wire for shim stock. High leverage for extra cutting power • 33 1/4 is a high leverage scissor with delicate, extra sharp, curved blades • 383 1/2 has two sharp points and is sturdily built for cutting light wire • 384 and 385 have the same features, but vary in overall length and length of cut • 554 has snub-nosed, curved blades, and long, strong handles for cutting wire and filament in limited clearance areas • 564C has one blade serrated to prevent slip-out • Made in the U.S.A.
FIBER OPTICS
TWEEZERS AA-SA 5SA
7SA 7C
TELECOM
ELECTRONICS
ELECTRICAL
231 226
• AA-SA — Strong, fine tips. General purpose tweezer popular for assembly line work. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. • 5SA — Needle sharp tips. Excellent for die attaching, wire bonding, and handling miniature parts. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. • 7SA — Extra fine curved tips for working on miniature assemblies. Curved tips allow hand to rest on work surface for support, which means greater accuracy with less fatigue. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. • 7C — Same design as the 7SA but made of carbon steel. Chrome plated for extra protection. • 231 — General purpose assembly tweezer with serrated inside points. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. • 226 — Same design and serrated points as the 231 but made of carbon steel. Chrome-plated for added protection • Made in the U.S.A. • Weight: 7 oz (198 g)
Model
Full Length
Part No.
AA-SA 5-SA 7-SA 7C 231 226
4-7/8 in. / 124 mm 4-1/4 in. / 108 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-3/4 in. / 121 mm 4-3/4 in. / 121 mm
46056 46029 46034 46032 46011 46009
109 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
AW, AWG
Anti-Wicking Tools FIBER OPTICS
AW SERIES
AWG SERIES
ELECTRICAL
CONDUCTOR MODEL* FULL LENGTH CONTACT LENGTH
HOLE DIAMETER
ELECTRONICS
• AW Series: Bullet-shaped head grips conductor, supports insulation • AWG Series: L-shaped head affords greater visibility. Works well in tightly confined solder areas • Precision-made from non-fatiguing copper alloy • Fully chrome-plated for extended life and solder-free operation • Heads drilled to precise tolerances for positive conductor contact and maximum thermal conductivity • Insures compliance with military and NASA specifications on inspection requirements of solder connections when used properly • Reverse action automatically grips conductor • Part numbers give correct AWG size wire that tools are made to fit • Meets all specifications for soldering both single and multi-strand wire • Made in the U.S.A. • Weight: 7 oz (198 g) PART NO.
AW 18 AW 20 AW 22 AW 24 AW 26 AW 28 AW 30
5 in. / 127 mm 5 in. / 127 mm 5 in. / 127 mm 5 in. / 127 mm 5 in. / 127 mm 5 in. / 127 mm 5 in. / 127 mm
1/16 in. / 1.59 mm 1/16 in. / 1.59 mm 1/16 in. / 1.59 mm 1/32 in. / .79mm 1/32 in./ .79 mm 1/32 in. / .79 mm 1/32 in. / .79 mm
.046 - .047 in. / 1.17 - 1.19 mm .035 - .036 in. / .89 - .91 mm .028 - .029 in. / .71 - .74 mm .022 - .023 in. / .56 - .58 mm .017 - .018 in. / .43 - .46 mm .012 - .014 in. / .30 - .36 mm .010 - .011 in. / .25 - .28 mm
46059 46061 46063 46065 46067 46069 46071
AWG 18 AWG 20 AWG 22 AWG 24 AWG 26 AWG 28 AWG 30
4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm 4-1/2 in. / 114 mm
1/16 in. / 1.59 mm 1/16 in. / 1.59 mm 1/16 in. / 1.59 mm 1/32 in. / .79 mm 1/32 in. / .79 mm 1/32 in. / .79 mm 1/32in. / .79 mm
.046 - .047 in. / 1.17 - 1.19 mm .035 - .036 in. / .89 - .91 mm .028 - .029 in. / .71 - .74 mm .022 - .023 in. / .56 - .58 mm .017 - .018 in. / .43 - .46 mm .012 - .014 in. / .30 - .36 mm .010 - .011 in. / .25 - .28 mm
46073 46076 46079 46082 46085 46087 46089
* Model numbers give correct wire size tools are made to fit
Phone: 860-635-2200 110
TELECOM
Long Nose Plier • Perfect for precision assembly work • Ideal for mechanics, technicians and hobbyists • Spring closing action holds parts so they don’t slip during assembly • Narrow width; .25 inch (6.35 mm) • Soft plastic coated handles • Made in the U.S.A. • Length: 9.25 in. (234.95 mm) • Weight: 2.7 oz (77 g) • Part No.: 80285
111 www.ripley-tools.com
DIMENSIONS (MM)
NOZZLE SILICONE RUBBER
NOZZLE PTFE
ANTI-STATIC
BODY PLASTIC
BODY ALUMINUM
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
85
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
DESOLDERING GUNS
Mini Antistatic De-soldering Tool
39455 DSG PRM 587
DSG PRM De-soldering Tool fitted with micronozzle
FIBER OPTICS
39459 DSG MINI AS 59802
39467 DSG 587 AS
The anitstatic version of the DSGPRM
39461 VALUVAC 574 AS
39463 FLEXIVAC 2006
Black plastic bodied VAL-U-VAC with the flexi nozzle
ELECTRICAL
Black antistatic plastic bodied VAL-U-VAC with PTFE nozzle
39466 FLEXIVAC 2009
3 position antistatic FLEXIVAC with the flexi nozzle
NEOPRENE WASHERS
SPARES NOZZLES (X5)
WEIGHT (G)
DIMENSIONS (MM)
NOZZLE SILICONE RUBBER
NOZZLE PTFE
ANTI-STATIC
BODY PLASTIC
BODY ALUMINUM DSG PRM 587 (39455)
A B C D E
4 4 190 20 20 3 1.5 56 39503 39512 DSG 587 AS (39467) 4 4 4 190 20 20 3 1.5 56 39505 39512 DSG 59802 AS (39459) 4 4 4 154 14 15.5 3 1.5 35 39504 39514 VALUVAC 574 AS (39461) 4 4 4 184 26 20 3 1.5 39 39508 FLEXIVAC 2006 (39463) 4 4 4 206 26 30 5 2 42 39506 FLEXIVAC 2009 (39466) 4 4 4 198 26 30 5 2 60 39506 NB: All Anti-Static Desoldering Guns comply with European Standards CECC 15, relating to the safeguarding of static sensitive components.
Phone: 860-635-2200 112
TELECOM
PRODUCT (Part No.)
ELECTRONICS
• Complete range of professional quality desoldering tools for solder removal • Tools feature PTFE or silicon rubber nozzles (see below) • Extraction springs located outside the vacuum chamber to prevent solder sticking and promote long life • Anti-static gun versions feature carbon impregnated tips and polished aluminum bodies to provide conduction from the desoldering point through to the operator (some plastic bodies, see below)
FIBER OPTICS ELECTRONICS
ELECTRICAL
SOFTY® ANTI-STATIC DISPOSABLE WORK MATS
• Cushioned surface protects delicate assemblies and expensive work surfaces • Make small parts handling easier and quicker • Inexpensive and disposable • Anti-static and free from contamination • Depress easily to give tools a sure grip on parts • Backing is non-slip, even on smooth glass • Will not put carbon into the atmosphere • Can be cleaned with soap and water without affecting their anti-static quality • Available in two sizes of mats or rolls • Surface restivity 1010 - 1011 ohms/sq • Meets DOD-STD-1686 for anti-static material • Meets DOCFF1-70 test for flammability
TELECOM
MODEL
M11 White
M14
SIZE
PACKAGING
PART NO.
11 in. x 14 in. (279 mm x 356 mm)
Single 46180
14 in. x 22 in. (356 mm x 559 mm)
Single 46183
R22 White
22 in. Width (559 mm)
*180’ (55 m) per roll
46281
R44 White
44 in. Width (1118 mm)
*180’ (55 m) per roll
46283
* Feet per roll is approximate
113 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
PDT-66 /110 Punch Down Tool
FIBER OPTICS ELECTRICAL
• This spring-loaded adjustable, automatic impact tool is used for terminating wires on 110/88 or 66 – type connecting blocks • Precision hardened and interchangeable blades spread the termination prongs to allow fast and easy insertion of the wire into the contact, providing a tight termination that resists corrosion. The blade finishes the job in the same motion by neatly cutting off excess wire • Accepts a variety of interchangeable blades • No screwdriver is needed to change the blades • The impact of the blade can be adjusted simply by turning a thumb wheel • Convenient storage compartment with a unique locking mechanism provides storage for spare blades • Replacement Blades: 110/88 Part No.: 46268 110/66 Part No.: 46269 • Length: 5.75 in. (146 mm) • Weight: 5.1 oz (145 g) • Part No.: 46271
RJC
RJ Crimping Tool ELECTRONICS
• Crimps RJ10, RJ11, RJ12, RJ22 and RJ45 modular RJ connectors (4P, 6P, 8P) • Comfortable and ergonomic plastic grips • Wire cutter and jacket stripper built into tool body • Easy release ratcheting mechanism for ease of assembly • Ratchet mechanism can be released mid-cycle • Length: 7-3/4 in. (197 mm) • Weight: 12 oz (340 g) • Part No.: 80756 • Replacement Blades: Part No.: 80757
TELECOM Phone: 860-635-2200 114
BTC
• Crimps British Telecom 430A/431A, BT 630A/631A, RJ 11/12 and RJ45 modular connectors • Comfortable and ergonomic plastic grips • Wire cutter and jacket stripper built into tool body • Easy release ratcheting mechanism for ease of assembly • Ratchet mechanism can be released mid-cycle • Length: 197 mm (7-3/4 in.) • Weight: 340 g (12 oz) • Replacement Blade: Part No.: 80757 • Part No.: 40000
TELECOM
ELECTRONICS
ELECTRICAL
FIBER OPTICS
BT/RJ Crimping Tool
SMART-STRIP Data Cable Stripper
• Versatile and compact tool suitable for all types of standard insulation • Smart-Strip produces an accurate depth of cut to any standard insulated size of wire or cable in the 0.03 to 0.39 in. (0.75 - 10 mm) range • Strips UTP & STP data network cable • Detailed depth adjustment mechanism allows the operator to change settings across standard insulations and a variety of delicate and irregular shielded multicore cables • Spring loaded action • Fixed depth version also available • Weight: 1.4 oz (40 g) • Dimensions: 3.8 x 0.75 x 1.5 in. (97 x 19 x 38 mm) • Part No.: 39470
115 www.ripley-tools.com
TELECOM / FIBER OPTICS ELECTRICAL / ELECTRONICS
UTP Jacket Trimmer LDT-UTP is used for stripping the jacket on CAT5, CAT5E and CAT6 UTP/STP cables DDT-UTP combo design is used for stripping the jacket on CAT5, CAT5E, CAT6 and the larger O.D. 10G types of UTP/STP cables Molded blade cassette ensures precise jacket stripping with no nicking/scoring of the twisted pair conductors Factory pre-set cassette blades requires no adjustment by the installer DDT combo model reduces the number of tools required to prepare various sizes of twisted pair (UTP/STP) cable Note: Tool is not intended for Plenum Series Cable construction Replacement Cassettes (two/package) * RC-UTP (Part No.: 42687) * RC-UTP-10G (Part No.: 42768) LDT-UTP * Length: 4 in. (102mm) * Weight: 0.8 oz (23g) * Part No.: 42688 DDT-UTP * Length: 3.63 in. (92.08mm) * Weight: 2.0 oz (57g) * Part No.: 42452 Made in the U.S.A.
ELECTRICAL
• • • • • • • • • •
FIBER OPTICS
LDT-UTP, DDT-UTP
ELECTRONICS TELECOM Phone: 860-635-2200 116
NOTES
117 www.ripley-tools.com