Latus Motors Harley-Davidson
> Tank
> Front
End / pg 108
> Engine / pg 122
> Rear
& Dash / pg 102
End / pg 138
> License
存 CHROME
Plates / pg 149
chrome W W W . K U R Y A K Y N . C O M
101
Latus Motors Harley-Davidson tank & dash Accessories Rendering Shown
3788
3790 3787
speaker grills
for Electra Glide & Street Glide
Crank it up! While you’re enjoying great travelin’ tunes, add some visual punch to your speakers. With these trick grills, your speakers will look as good as they sound! Available in Chauvinist, Flame, Widow or Zombie designs.
deluxe gauge bezels These elegant Gauge Bezels blend beautiful chrome rings with tasteful, colored accents. 3782 The rubber-like accent is captured by the press-on chrome ring. Each pair of bezels includes black, red, & blue accents giving the rider options at the time of installation to select the color that best complements their motorcycle’s paint scheme.
3781
Large Deluxe Gauge Bezels with Colored Accents (pr) Fits: ’00-’09 Electra Glide, Road Glide & Street Glide speedometers & tachometers
$
3782
Small Deluxe Gauge Bezels with Colored Accents (pr) Fits: ‘86-’09 Electra Glide, Road Glide & Street Glide voltmeter, oil pressure, air temp, & fuel gauges
$
Fits: Fairing speakers on ’96-’09 Electra Glides & ’06-’09 Street Glides
3787
Zombie (pr)
$
29.99
3789
WIdow(pr)
$
29.99
3788
Flame (pr)
$
29.99
3790
Chauvinist (pr)
$
29.99
3789
72.99
51.99
3781
3782
3789
3783
switch panel accent for Electra Glide & Street Glide Here’s a sweet looking accent you can enjoy every time you’re in the saddle! A great addition to either H-D or Küryakyn chrome gauge bezels, this trim places an attractive chrome frame around the ignition & the adjacent control switches. Besides being serious eye candy, the smooth chrome surface is much easier to keep clean than the stock matte finish. Simple peel-&-stick installation requires no tools or disassembly. Fits: ’96-’09 Electra Glides & ’06-’09 Street Glides
3783
102
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Switch Panel Accent (ea)
$
39.99
Latus Motors Harley-Davidson 3791 3780
3769
Rendering Shown
3791
speaker grills for Road Glide
Plain black mesh speaker covers were pretty boring until now! Our new Speaker Grills install in minutes & bring the stock covers to life, while giving you the opportunity to add your own personalized touch. The round Three Spoke Insert can easily be substituted with our Chauvinist (P/N 3784), Illiana (P/N 3768), or Twin Ring (P/N 3785) 2” Gauge Bezels (sold separately - pg 104).
At first glance you’ll notice the difference; glove box doors that stand out instead of disappearing into the flat black background. But besides the great look, this striking chrome trim also provides a finger catch to make opening the doors a snap - even with gloves on! Fits: ‘98-’09 Road Glides
3769
Glove Box Accents (pr)
$
49.99
Fits: ‘98-’09 Road Glides
3791
Speaker Grills (pr)
$
¸ CHROME
glove box accents for Road Glide
Rendering Shown
49.99
3769
nacelle accents for Road Glide
Forget about run-of-the-mill gauge bezels… this kit totally transforms the appearance of the Road Glide speedometer, tach, & fork nacelle. The main cover envelops the gauges & indicator lights with an elegantly sculpted shroud while the four individual accent pieces decorate the edges of the nacelle. Simple peel-&-stick installation for an instant transformation! Fits: ‘98-’09 Road Glides
3780
Nacelle Accents for Road Glide (set)
129.99
$
W W W . K U R Y A K Y N . C O M
103
Latus Motors Harley-Davidson 3784
3768
gauge bezels for 2” Gauges
Plain chrome gauge bezels are great if your taste is more vanilla than exotic. But what if you & your bike have a little more flair? Our new Gauge Bezels offer the spice that appeals more to the gourmet. Three selections are available to please the more discerning custom palate. Although they’re a little more upscale, the peel-&-stick installation is still simple. Fits: ’86-’09 volt meter, air pressure, air temp or fuel gauge on Electra Glides, Tour Glides, Road Glides & Street Glides
3784
Chauvinist (pr)
$
3785
Twin Ring (pr)
$
3768
Illiana (pr)
$
19.99 19.99 19.99
3785
dash panel insert
mirage® instrument visors
for Softail & Dyna Wide Glide
These streamlined trim rings, besides looking sharp, can also reduce glare in some situations. Easily installed with supplied silicone.
A simple custom cover that makes a huge difference. Fits: ’93-’03 Dyna Wide Glides, & all ’00-’09 Softails (except ’00-’07 Deuce, ’05-’06 FLSTFSE, ’07-’09 FXSTSSE, ’08-’09 Rocker/C, ’08-’09 FLSTSB, & ’09 FLSTC)
1522
Dash Panel Insert (ea)
103
Fits: ’73-’84 FX Models with Dual Gauges (pr)
$
29.99
103.99
$
112
speedometer bezels Dress up your speedo easily & affordably with one of our two great looking bezels! Both styles completely cover the stock stainless steel bezel. One incorporates a stylish visor, while the other gives the illusion of a recessed speedo. Fits: ’68-’09 H-D Models with Large FL-Style Tank-Mounted Speedo (FLH, FXWG, Softails, Dyna Wide Glide, Road Kings (except ’08-’09 Road King)
106
Speedometer Trim Ring (ea)
$
20.99
112
Speedometer Trim Ring with Visor (ea)
$
25.99
speedometer visor Easily affixes to the speedometer. Besides the sleek appearance, you’ll really appreciate the reduction in glare if you run a windshield! Fits: Speedometers & tachometers with a 3-3/4” O.D. & 7/16” exposed side wall. Fits perfectly on Road Glides, ‘04-’09 Sportster Customs, & many other bikes
106
4015
104
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Speedo/Tach Visor (ea)
$
25.99
Latus Motors Harley-Davidson
dash panel insert for Road King This sculpted, chrome Dash Panel Insert is a huge improvement over the generic, rough cast finish dash Road Kings come with. Beveled openings for indicator light & the ignition switch evoke a recessed “frenched in” look. Using only two fasteners, you can make the leap from ho-hum to WOW in minutes! Fits: ‘94-’07 Road Kings (except ‘04-’07 FLHRS & ‘07 FLHRSE)
1520
Dash Panel Insert for Road King (ea)
135.99
$
fuel door gps/ accessory mount for Touring Models This cleverly designed mount replaces the stock hinged fuel door to provide a stable & easily accessible place to mount a GPS, satellite radio, or other personal electronic device. The swap only takes a few minutes. The bracket angle is easily adjustable & accepts almost any device that utilizes a cradle with the industry standard 4-hole AMPS pattern. Also accepts items like MP3 players, cell phones, or just about anything with a belt clip.
1465
Fits: ‘92-’07 Electra Glides, Road Glides, Street Glides & Tour Glides
$
1466
Fits: ‘08-’09 Electra Glides, Road Glides & Street Glides
$
103.99
CHROME
¸
103.99
Note: Always ensure that installation of the electronic device will not interfere with handlebar movement.
push button fuel door latch Fumbling with your keys in the dark while trying to get your gas door open is not anyone’s idea of fun. Add our Push Button Fuel Door Latch & make getting to the gas cap easy! It’s a direct replacement for the stock key-lock fuel door latch. Fits: All ’92-’09 Electra Glides, Road Glides, Street Glides & Tour Glides
1467
Push Button Fuel Door Latch (ea)
$
29.99
W W W . K U R Y A K Y N . C O M
105
Latus Motors Harley-Davidson informer l.e.d. fuel & battery gauge Patent Pending
A perfect match to our Flush Mount Gas Cap, The Informer’s sleek, low profile design incorporates both an L.E.D. fuel gauge & an L.E.D. battery gauge. A daylight sensor automatically adjusts the brightness of the L.E.D.’s. The fuel gauge has a string of color coded L.E.D.’s to indicate fuel level. When full, a single green L.E.D. will be illuminated at the right end of the string. When the tank is virtually empty, a single red L.E.D. will flash at the left end of the string. Red L.E.D.’s appear from empty to 1/8 tank, amber L.E.D.’s appear from 1/4 to 1/2 tank, & green L.E.D.’s appear from 5/8 to full. Our patent pending design allows the rider to select the fuel level at which the red “empty” L.E.D. illuminates. The stock float & sending unit are notoriously inconsistent & often contribute to inaccurate readings at the gauge. Want the gauge to read empty when the bike is on fumes? No problem. Want the gauge to read empty when there is still a gallon left in the tank? No problem, the choice is up to you. The Battery Gauge is an array of L.E.D.’s that indicate the operating voltage of the bike’s electrical system. Green L.E.D.’s represent the normal, safe operating range of your charging system, 12.5v to 14.5v Amber L.E.D.’s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider. Fits: All H-D Models with fuel gauge mounted in left fuel tank (except ’08-’09 Softails, Road Kings, & ’09 Dynas)
8375
Informer L.E.D. Fuel & Battery Gauge (ea)
8669
8671
124.99
$
flush mount gas caps U.S. Patent D400,838
Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa’s Buick. These slick Flush Mount Gas Caps have the high-tech look of aviation-style fuel fillers. The built-in trim ring protects the painted surface around the filler opening from dings & gas stains. A keyed entry system permits their ultra thin profile & prevents tampering. No cutting required. Fits: All H-D screw type tanks from ‘82-’09
8309
Flush Mount Gas Cap (R.H. Thread) - Vented (ea)
$
49.99
8310
Flush Mount Gas Cap (L.H. Thread) - Non-Vented (ea)
$
49.99
8311
Replacement Key for 8309 & 8310 (ea)
$
4.99
8667
replacement gas caps Sometimes they get lost, sometimes they get stolen, & sometimes they just wear out. Vented or non-vented, these chrome-plated gas caps are a fraction of the cost of stainless steel caps. Fits: All H-D screw type tanks from ‘96-’09
106
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
8667
Peaked Low Profile Gas Cap (R.H. Thread) - Vented (ea)
$
25.99
8668
Peaked Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea)
$
25.99
8669
Stock Style Gas Cap (R.H. Thread) - Vented (ea)
$
8670
Stock Style Gas Cap (L.H. Thread) - Non-Vented (ea)
$
8671
Domed Low Profile Gas Cap (R.H. Thread) - Vented (ea)
$
25.99
8672
Domed Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea)
$
25.99
14.99
12.99
Latus Motors Harley-Davidson the marquis choke knob
Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it’s easier to find & get a hold of! Fits: All ’88-’06 XL Models & ’90-’06 Big Twin with stock carburetors
2009
Marquis Choke Knob Cover (ea)
$
29.99
fuel line fitting cover
Cover up the plumbing on your fuel injected bike with this two-piece streamlined beauty. Fits: ’01-’09 fuel injected Softails, ’02-’09 fuel injected Electra Glides, Road Glides, Street Glides, & Road Kings, ’04-’09 fuel injected Dynas, & ‘07-‘09 fuel injected Sportsters
1521
Fuel Line Fitting Cover (ea)
1535
Replacement O-rings (pr)
$
41.99
$
5.99
petcock cover With its dull industrial finish, a stock gas valve is hardly a thing of beauty, but to replace it with a trick aftermarket unit could cost up to a hundred bucks. A large hex knob provides easy operation. Installation is a snap, & costs about a third of custom replacement valves.
for Road King
A little trim goes a long way. Place this three-dimensional trim plate at the bottom of the Road King dash for a sleeker, more finished look. Easily installed in only minutes. Fits: ’94-‘07 Road Kings (except ’04-’07 FLHRS & ‘07 FLHRSE)
1518
Dash Trim for Road King (ea)
19.99
$
¸ CHROME
dash trim
Fits: ‘81-’01 stock H-D petcocks
2011
Chrome Petcock Cover (ea)
$
29.99
fork lock cover for Road King
Protection & beauty to keep debris from getting into your Road King’s fork lock mechanism at an affordable price. Fits: All ’94-’09 Road King Models
1513
tank tab trim for XL
Fork Lock Cover for Road King (ea)
$
39.99
Note: It may be necessary to modify key slightly to operate lock mechanism.
Add sizzle to Sportster fuel tanks with these show-chromed mounting tab covers. Specially designed chrome fasteners blend with the tab covers to complete the installation & hold all components securely in place. Fits: Stock ‘96-’03 XL fuel tanks
1508
Tank Tab Trim (set)
$
41.99 W W W . K U R Y A K Y N . C O M
107
Latus Motors Harley-Davidson chrome Front End C
D F
e Yo ur K端ryakyniz Witness Fr ont End &orma tion th e Transf c k t o Fr om St o r! Sp e c tacula
A E
B
108
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Latus Motors Harley-Davidson S TREE T GLIDE
A
— FRONT END
upper fork slider covers Patent Pending You’d be amazed at the amount of time, materials & labor required to simply replace the stock stainless fork slider covers with chrome ones. Our new Upper Fork Slider Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers - no need to disassemble the front end! Want to really look sharp? Use these along with our Chrome Lower Leg Accents (P/N 8630 or 8631). Fits: ’96-’09 Electra Glides & Street Glides (Does not fit Screamin’ Eagle Models)
8635
Upper Fork Slider Covers (set)
B
155.99
$
lower leg accents for Touring Models
Patent Pending
One of the most notable features of the big H-D touring rig is the big burley front end. What a shame that the lower legs & brake calipers come from the factory with polishing imperfections & such an uninspiring dull finish! This innovative kit provides an easy, low cost way to put a flawless chrome finish on the lower legs (from the fender mounting bosses down) & the brake calipers with no need to dismantle the front end! Constructed of beautifully chromed stamped steel for a long & beautiful life.
8630
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings (set)
$
8631
Fits: ’08-’09 Electra Glides, Road Glides, Street Glides, & Road Kings without ABS (set)
$
279.99 199.99
Note: This set does not include Caliper Covers.
C
windshield trim for FLHT Accent the transition from bike to windshield while adding attitude. Choose between Zombie or Eagle styles. These swooping accents are beautifully chrome-plated & are simple to install.
CHROME
¸
Fits: ‘96-’09 Electra Glides & Street Glides
1199
Eagle Windshield Trim (ea)
$
69.99
1198
Zombie Windshield Trim (ea)
$
69.99
1189
Replacement Emblem for Zombie Windshield Trim (ea)
$
1369
Windshield Mounting Spikes, 1/4-20 x 5/8” (set/3)
$
10.99 19.99
SEE MORE.... D R A G O N W I N G S / p g 174 / #1117
E FORK MOUNTED DRIVING LIGHTS
D
/ pg 22 / #5008
H.I.D. LIGHTING / pg 18 / #2253
F
W W W . K U R Y A K Y N . C O M
109
Latus Motors Harley-Davidson fairing trim for Road Glide What do a supermodel & a Road Glide fairing have in common? They both look terrific when their soft contours are highlighted! OK, a hot bikini will probably get more looks, but this new Fairing Trim does make the most out of the sleek lines of this bike. This curvaceous chrome molding installs easily with high-strength peel-&-stick adhesive, & the integrated L.E.D. supplemental run/turn lights simply plug into existing wiring. Fits: ’98-’09 Road Glides
8649
Fairing Trim for Road Glide (pr)
159.99
$
1370
windshield trim for Road Glide
8649
Make a clean transition. This handsome three-piece trim set provides a smooth, flowing bridge from the fairing to the windshield. Available either in plain smooth chrome, or with interchangeable emblems to blend with accessories featuring the Zombie or Maltese Cross theme. Fits: ’98-’09 Road Glides
1371
1370
Windshield Trim for Road Glide (ea)
$
1371
Deluxe Windshield Trim for Road Glide (ea)
$
8649
1371
headlight visor for 7” Headlight Patent Pending
Long, lean, & mean! That’s the illusion your stock headlight shell will get by adding this slick Headlight Visor. Features a nicely finished rolled front edge with center bullet - a big difference that will be noticed immediately. Fastens securely to your existing headlight for easy installation! Fits: All H-D Models with 7” headlight
2182
Headlight Visor for 7” Headlight (ea)
$
31.99
Note: Does not fit with H-D Accessory Trim Rings.
110
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
129.99
145.99
Latus Motors Harley-Davidson fender accents
The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide & many CVO Screamin’ Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. Complete the look with the matching Rear Fender & Saddlebag Accents on pg 143.
8642
Front Fender Accent (Leading Edge) Fits: Street Glides, Road Glides, Road King Customs, & Screamin’ Eagle Dressers or Road Kings (except ’07 FLHRSE) (ea)
$
31.99
8643
Front Fender Accent (Trailing Edge) Fits: Street Glides, Road Glides, Road King Customs, Screamin’ Eagle Dressers or Road Kings (except ‘07 FLHRSE) (ea)
$
31.99
8642
Make
it
a
S et ...
rear fender & saddlbag accents
You’ve gotta look good coming & going!
See Pg 143
P/N 8640 & 8641
8608
8607
8606
fender tip lens grills
zombietm medallions Keep a bunch of little Zombies with you wherever you are. Stick them on your motorcycle, toolbox, car, computer monitor—anywhere you think their sinister faces will brighten your day. Just peel off the backing & fasten them onto…whatever! Leave a trail of Zombies & you’ll always find your way home. Large Zombie (requires 2” of flat surface for mounting) (pr)
Fits: ’80-’08 Electra Glides, Tour Glides, Road Kings & ’86-’09 FLST Models with front & rear fender tip lights
15.99
$
Note: Replacements for Küryakyn Saddlebag Latch Accents (P/N 1595)
1492
Small Zombie (requires 1” of flat surface for mounting) (pr)
14.99
$
8606
Zombie Fender Tip Lens Grills (pr)
$
34.99
8607
Maltese Cross Fender Tip Lens Grills (pr)
$
34.99
8608
Grooved Fender Tip Lens Grills (pr)
$
34.99
¸ CHROME
1491
This unique design embeds custom emblems in a bold chrome grill. Choose from Zombie, Maltese Cross, or grooved styles. Each easy-to-install set includes both front & rear lens grills.
Note: Replacements for Küryakyn P/N’s 1047, 1058, 1060, 7520, 7521, & 8606
fender tips fender ornaments Let your front fender take on a new life with one of our majestically sculpted fender ornaments.
9022
Wild Boar Fender Ornament (ea)
$
9026
Eagle Fender Ornament (ea)
$
3103
Replacement Bulb, #161 (ea)
49.99 45.99 1.99
$
These fender tips add a nostalgic touch to any bike in seconds! Models are available to fit most OEM H-D fenders. Simple installation requires no drilling & can be done without any tools. A great way to cover dinged fender tips.
9012
Fits: Narrow H-D Front Fenders on FXST, XL, FXDWG, Dyna, & FXR Models (Leading Edge) (ea)
$
29.99
9013
Fits: ‘90-’09 Fat Boy Front Fenders (Leading Edge) (ea)
$
29.99
9014
Fits: ‘90-’09 Fat Boy Front Fenders (Trailing Edge) (ea)
$
29.99
9015
Fits: ‘90-’06 Fat Boy Rear Fenders (ea)
$
29.99
9012
9013
W W W . K U R Y A K Y N . C O M
111
Latus Motors Harley-Davidson
8620
fork brace for Wide Glide Front Ends ®
The Küryakyn Wide Glide Fork Brace securely ties the fork sliders together for a more rigid, smoother operating front end. By reducing fork flex, one can enjoy more aggressive, controlled cornering, smoother ride, & straighter, more predictable hard stopping. Aside from being one of the more functional accessories available, this is also a sweet looking item.
8620
Fits: 41mm Wide Glide Front Ends found on ’80-’85 FXWG, ’93-’05 FXDWG, & ’85-’09 FXST Models (except Springer, Deuce, Rocker/C) (ea)
$
8600
Fits: ’00-’07 Deuce (ea)
$
155.99
169.99
2014
1291
2018
1291
2014 2018 1293
full coverage caliper covers These unique accents cover the entire profile of the brake caliper while deviating from the standard round style caliper insert.
1291 1293
112
Front Caliper Cover (ea) Fits: All ’84-’99 Models & ‘00-’07 FLSTS/FLSTSC/FXSTS
$
Rear Caliper Cover (ea) Fits: All ’87-’99 Models except Dressers or Road Kings
$
C U S T O M E R
C A R E
C E N T E R
brake bleeder screw & banjo bolt covers Used by themselves, or as a complement to our other caliper accessories, these little jewels transform the unfinished bleeder screws & banjo bolts on stock H-D calipers into glistening chrome. Bleeder Screw Covers Fit: All ’84-’09 stock H-D calipers (except ‘08-’09 Touring)
20.99
22.99
8 7 7 - 3 7 0 - 3 6 0 4
2018
Bleeder Screw Cover (ea)
$
2013
Bleeder Screw Cover (pr)
$
2014
Banjo Bolt Cover (ea) Fits: ‘84-’09 H-D master cylinder & calipers (except ‘08-’09 Touring master cylinder & caliper, ‘08-’09 Softail & Dyna calipers & ‘04-’09 XL master cylinder & caliper)
$
10.99 19.99
15.99
Latus Motors Harley-Davidson lower leg covers for Softail Patent Pending
Everyone loves the look of a deliciously chromed front end. But until now, the time, labor, & expense of chroming FLST lower fork legs made this option much less tempting. Küryakyn Lower Leg Covers make this upgrade quick, easy, & affordable. Stylized stamped steel covers simply bolt securely into place right over the stock lower legs! The version for ’00-’07 Models also includes a matching caliper cover. You’ll have a classy shining look in no time & plenty of cash left in your wallet!
8632
Fits: ‘86-’99 FLST Models (except Springer) (pr)
$
8633
Fits: ‘00-’07 FLST Models (except Springer) (pr)
$
8634
Fits: ‘08-’09 FLST Models (except Springer) (pr)
$
8633
169.99
197.99
169.99
8632
Don’t Miss This...
lower leg accent
Got a Touring Model & want to chrome out your forks? We didn’t forget about you!
On-Bike Shown with Bullet Covers for Banjo & Bleeder Screw (Sold separately - pg 118).
See Pg 109
P/N 8630
riser bolt covers
Fits: Covers hex head of 1/2” riser mounting bolt Riser Bolt Covers (pr)
17.99
$
chrome hub fillerspeedo drive cover Available individually or as a set. Fits: ’87 to ’96 Softails (except Fatboy) & ’93-’96 Wide Glides
8134
Chrome Speedo Drive Cover Fits all Models to ’95 (except 39mm front ends) (ea)
$
8142
Hub Filler & Speedo Drive Cover (set)
$
8135
Speedo Drive Cover for 39mm Narrow Glide Front Ends (ea)
$
front caliper skins It’s every hard-working caliper’s dream to go first class in luxurious, contoured chrome. These Caliper Skins give your bike the look of high-tech 6-piston calipers without the expense, plus make it a lot easier to keep the caliper area clean. The 2-piece clamshell design makes this cover easy to install.
1285
Caliper Skins (pr) Fits: ‘00-’05 Dressers & Road Kings without rotor covers
1286
Caliper Skins, Left (ea) Fits: All ‘00-’07 Softails (except FXSTS, FLSTS & FLSTSC), all ‘00-’07 Dyna Models, all ‘00-’03 XL Models (except 883C & 1200C)v, all ‘02-’05 V-Rod (Does not fit Dyna or XL with laced 19” wheels)
$
72.99
1287
Caliper Skins, Right (ea) Fits: ‘00-’05 FXDX, ‘01-’03 FXDXT, ‘00 FXDL & FXDS, ‘00-’03 XL1200S, ‘02-’03 XL883R, & all ‘02-’05 V-Rod
$
72.99
15.99
39.99 13.99
CHROME
Perfection lies in the details. Our Chrome Riser Bolt Covers conceal your stock zinc plated riser bolts.
8126
¸
On-Bike Shown with our Banjo Bolt Cover (P/N 2014) & Brake Bleeder Screw Cover (P/N 2018) (Sold separately - pg 112).
103.99
$
Note: When installing caliper skins check for clearance with valve stems. Lengths & location of valve stems will vary. W W W . K U R Y A K Y N . C O M
113
Latus Motors Harley-Davidson 8625
8629
fork skins
A chromed front end at a fraction of the cost! Add up the related costs of actual plating, new seals, new fork oil, axle caps, chrome hardware, labor, & (to keep this comparison accurate) a chrome fork brace, the final bill is realistically around $450. Our Fork Skins will chrome out 39mm or unshrouded 41mm front ends & provide the improved handling associated with a fork brace. This kit is extremely quick & easy to install. Only a few wrenches & about 20 minutes is needed to transform the ordinary to the spectacular. Fork Skins fit 39mm front ends found on FXR, Dyna, XL, & unshrouded 41mm front ends on FXST (except Deuce) & FXDWG Models.
8622
Fits: ’04-’07 Sportster with 39mm Single Disc Front Ends (set)
$
8625
Fits: ’88-’99 Single Disc 39mm Front Ends (set)
$
8623
Fits: ’00-’03 Single Disc 39mm Front Ends (set)
$
8629
Fits: ’00-’06 41mm Wide Glide Front Ends (set)
$
199.99 199.99 199.99 199.99
twisted axle caps
Here’s a new twist on an old favorite! These eye-catching Axle Caps bring new life to dull, unfinished stock axle ends.
1217
Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)
$
59.99
1218
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dynas (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)
$
59.99
1219
Fits: ’07-’09 Softails (except Deuce, Springer & Rocker ), ’08-’09 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘09 Dynas (except ’08 FXDSE), ’08-’09 Sportsters, ‘02-’09 V-Rod (except VRSCR & VRSCF) (pr)
$
59.99
Ad d a H in t o f W i c k e d!
114
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
axle nut covers These sleek axle caps blend nicely with virtually all H-D front forks. These fit up close to the sliders with no unsightly gaps.
1201
Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)
$
1213
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dynas (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)
$
25.99
1214
Fits: ’07-’09 Softails (except Deuce, Springer & Rocker ), ’08-’09 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘09 Dynas (except ’08 FXDSE), ’08-’09 Sportsters, ‘02-’09 V-Rod (except VRSCR & VRSCF) (pr)
$
25.99
24.99
Latus Motors Harley-Davidson spun blade spinning axle caps
Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome-plated ABS blades start to spin when the bike reaches about 25 mph. Choose either a pointed center cap or a Zombie center cap to add an additional cool factor to your bike.
with Pointed Center Cap: 1232
Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)
$
99.99
1233
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dyna (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)
$
99.99
1234
Fits: ’07-’09 Softails (except Deuce, Springer & Rocker), ’08-’09 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘09 Dynas (except ’08 FXDSE), ’08-’09 Sportsters, ‘02-’09 V-Rod (except VRSCR & VRSCF) (pr)
$
99.99
with Zombie™ Center Cap: 1235
Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)
$
99.99
1236
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dyna (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)
$
99.99
1237
Fits: ’07-’09 Softails (except Deuce, Springer & Rocker), ’08-’09 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘09 Dynas (except ’08 FXDSE), ’08-’09 Sportsters, ‘02-’09 V-Rod (except VRSCR & VRSCF) (pr)
$
99.99
stiletto axle caps
for Narrow Front Fenders
Functional & classy! By adding this chromed front fender extension, you’ll enjoy a dryer ride in the rain, a cleaner engine, & a subtle hint of sparkle. A molded-in contour hugs the stock H-D narrow fender tightly for a look so clean you’d swear it was part of the original fender! Fits: Narrow H-D front fenders on FXST, XL, FXDWG, Dyna & FXR Models
9016
Front Fender Extension (ea)
$
CHROME
fender extension
¸
Aggressively styled, these axle caps let everyone know who’s the boss. By themselves or coupled with other accessories from the Stiletto line, these axle caps are killer! Three styles are offered to fit most H-D Models.
1205
Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)
$
69.99
1206
Fits: ’00-’06 Deuce (pr)
$
69.99
1212
Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dyna (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)
$
39.99
72.99
W W W . K U R Y A K Y N . C O M
115
Latus Motors Harley-Davidson
regulator cover for Softail Patent Pending
A stock voltage regulator normally fades into the background, but with this sharp Voltage Regulator Cover it will be right in the spotlight! Deep fins & beautiful chrome, it really stands out! Besides looking great, the smooth finish is much easier to keep clean & liberal venting lets it keep its cool. Installation? Simple – two bolts & you’re stylin’! Fits: All ’01-’09 Softail Models
7839
Regulator Cover for Softail (ea)
$
69.99
front motor mount cover for Dyna U.S. Patent D416,227
Here’s a beautiful cover for an ugly motor mount. Easy 2-bolt installation means you’ll be stylin’ in no time. Fits: ’91-’05 Dyna Models
1545
regulator cover for Touring Models A complete cover for your stock voltage regulator. Two-piece design uses a stamped steel base & a chrome composite top. Open & well-vented design keeps your regulator running cool. Two functional & decoratively shaped chrome fasteners add the finishing touch. Go ahead & light ‘er up! The open & vented design looks awesome when lit from the inside! We’ve left plenty of room inside to hide a Super Lizard Light or an L.E.D. Accent Light. Fits: ’97-’09 Electra Glides, Road Glides, Street Glides & Road Kings (except ’03-’09 Screamin’ Eagle Models)
1547
116
Regulator Cover (ea)
C U S T O M E R
C A R E
$
79.99
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Motor Mount Cover for Dyna (ea)
$
62.99
Latus Motors Harley-Davidson 7897
lower front frame covers Patent Pending
Engineered to shroud the lower portion of your bike frame, these distinctive chrome-plated covers hide the kickstand assembly, front engine stabilizer & the footboard mount. Instantly simplifies a usually unsightly area of the bike.
7897
Fits: ’91-’08 Touring Models without fairing lowers or oil coolers (Electra Glide Standard & Classic, Tour Glides, Road Glides, Street Glides, Road Kings) (ea)
$
7835
Fits: ’91-’08 Touring Models with fairing lowers &/or oil coolers (Ultra Classic Electra Glides, Ultra Classic Tour Glides, ’03 & ’07-’08 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE) (ea)
$
7897
69.99
72.99
7835 7835
CHROME
¸
chrome reflector covers These louvered chrome covers will stylize those unsightly front & rear reflectors while heightening visibility.
Inexp ensiv e brake pedal So lu t i o n arm cover
Arresting good looks without putting the brakes on your budget! This custom overlay puts a stylized chrome & black profile on the stock rear brake arm. High strength peel-&-stick adhesive allows fast, easy installation with no tools. Think of all the other cool accessories you can add to your bike with all the money saved by not replacing the entire control!
Fits: Front Downtubes: All ’92-’08 H-D Touring Models (Electra Glides, Road Kings, etc.), all ’91-’99 Softail Models, & all ’91-’99 Sportster Models
Fits: ’02-’09 Electra Glides, Road Glides, Street Glides, Road Kings & ’02-’09 FLST Models
Other motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector
9001
Chrome Reflector Covers (pr)
19.99
$
Rendering Shown
8652
Brake Pedal Arm Cover (pr)
$
59.99
W W W . K U R Y A K Y N . C O M
117
Latus Motors Harley-Davidson
oil pressure sender cover for Twin Cam
9128
Patent Pending
Here’s a great example of how details make the difference! The stock oil pressure switch is so plain looking it’s conspicuous. The simple addition of this finely sculpted chrome Oil Pressure Sender Cover complements other chrome pieces on the engine & adds life to the dull cast finish surrounding it.
8655
Fits: ’07-’09 Electra Glides, Road Glides, Street Glides & Road Kings, ’00-’09 Softails & ’06-’09 Dynas (ea)
$
72.99
8651
Fits: ’99-’06 Electra Glides, Road Glides, Street Glides & Road Kings (ea)
$
72.99
1231
Coming Later This Year
8655
rear master cylinder cover for Road King, Dresser & Softail
Banish the plain black stock assembly with this awesome one-piece, die-cast chrome cover. It fits over the stock lid so there is no chance of annoying leaks. Fits: ’99-’07 Electra Glides, Road Glides, Street Glides, Road Kings & ’00-’09 Softails
9128 8653
Rear Master Cylinder Cover (ea)
$
51.99
bullet covers Add these smoothly styled Bullet Bolt Covers to your bike in those areas that need a little extra shine.
rear master cylinder cover for ‘08 Touring
Combine the legendary stopping power of Brembo brakes with the arresting style of Küryakyn & you get this sweet new Rear Master Cylinder Cover! The super clean one-piece design covers everything – even the small related components. Simple, quick installation uses only two fasteners. Fits: ’08-’09 Electra Glides, Road Glides, Street Glides & Road Kings
8653
118
Rear Master Cylinder Cover (ea)
C U S T O M E R
C A R E
C E N T E R
$
62.99
8 7 7 - 3 7 0 - 3 6 0 4
1230
Small Bullet Covers (ea) Fits: 12mm 12-point screws found on ’00-’09 H-D brake calipers/caliper mounts & bleeder screws found on ’00-’07 H-D calipers (also covers any 7/16” hex bolt or nut)
$
1231
Bullet Banjo Fitting Covers (ea) Fits: Brake caliper banjo fitting on ’00-’07 H-D brake calipers & rear brake master cylinder banjo fitting on ’99-’07 Touring Models & ’00-’07 Softails
$
rear master cylinder cover for XL
U.S. Patent D409,119
Exchange the dull finish on your XL master cylinder with stunning, beautiful chrome by using our Rear Master Cylinder Cover. Fits: ’84–’03 XL Models
9127
Rear Master Cylinder Cover for XL (ea)
$
41.99
15.99
16.99
Latus Motors Harley-Davidson
Neck Covers
8163
neck covers
for FXST Standard & Night Train Our unique, die-cast chrome covers follow the contour of the tank & wrap over the top of the frame where sculpted ports allow wires & cables to pass through where necessary. Fits: ’00-’06 FXST Standard & Night Train (Does not fit Deuce) Neck Cover for Softail (set)
$
93.99
fuel tank cross-over line cover
7853
Hmmm... tough decision here – black rubber hose á la corrugated plastic & bare hose clamps, or a fine seamless chrome cover that hides everything? This should be a no-brainer. The Küryakyn Fuel Tank Cross-Over Line Cover goes on in minutes, is easy to keep clean, easy to work with, & nothing else available will look this sweet! Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
8673
Fuel Tank Cross-Over Line Cover (ea)
$
39.99
¸
neck covers for Heritage, Fat Boy, Deluxe, & Deuce Masking the roughly finished forged frame neck on a Twin Cam Softail is now as easy as two screws & a few minutes of your time. We’ve designed smooth & cleanly contoured stamped steel neck covers to work on Softail Models equipped with fork tins (Heritage, Fat Boy, etc.) & Deuces. These beautifully chromed covers mask the wiring, giving your bike’s neck a finished appearance.
Rendering Shown
7854
Fits: ‘00-’07 Deuce (set)
$
93.99
7831
Fits: ‘86-’99 FLSTC, FLSTF, FLSTN (set)
$
89.99
8163
Fits: ‘00-’06 FLST, FLSTC, FLSTF, FLSTN (set)
$
83.99
7833
Fits: ‘07-’09 FLSTC, FLSTF, FLSTN (set)
$
CHROME
8175
79.99
Note: These covers do not fit FLSTS, FLSTSC, or FLSTSB Models.
down tube covers for Softail Af ter completing neck cover installation, turn handlebars side-to-side to ensure that no wires or vent hoses are being pinched.
By popular request! Hundreds of you asked us to develop these for the Softail when you saw the ones we made for the baggers. Snap-on installation makes this an easy way to chrome the front frame down tubes.
7843
Fits: ‘92-’99 Softail Models (set)
$
59.99
7853
Fits: ‘00-’06 Softail Models (set)
$
59.99
7863
Fits: ‘07-’09 Softail Models (except Rocker/C) (set)
$
59.99
7853
W W W . K U R Y A K Y N . C O M
119
Latus Motors Harley-Davidson
chrome
P aint e d B lac k Chr om e Availab le!
7866 7799
deluxe neck covers
Patent Pending
Just the right touch of edge & functionality. Hide those welds & wires near the neck of your bike in one quick & easy step. The deluxe set includes upper covers & down tube covers. A two-piece set is offered in gloss black.
Deluxe Neck Covers (includes downtube covers) 7866
Chrome Deluxe Neck Covers (set) Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
7799
Painted Black Chrome Deluxe Neck Covers (set) Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
Neck Covers Only - Gloss Black 7865
Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (pr)
neck covers for Dressers & Road Kings These neck covers really dress up the exposed frame section of Harley’s touring rigs. Mounting hardware is included to accommodate the different tank mounts used on these Models. Wiring modifications are required on Models using plug-in style ignition modules that mount on the frame’s neck. Fits: ’89-’01 Electra Glides (except Ultra Classic), Road Glides, Tour Glides (except Ultra Classic), & Road Kings
8192
Chrome Neck Cover (set)
$
79.99
Note: Can be installed on ‘02-’05 Dressers & Road Kings (except Ultra) but idle cable must be replaced with one from an ‘01.
neck covers for Touring Models
Designed from a clean sheet, our neck cover is a smooth, quickly installed addition to any H-D Touring Model. The right side cover has been enlarged enough to accommodate the in-line cruise control pull-off switch found on the idle cable of all ’02-’05 Models.
8146
120
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
8168
The basic kit is offered in chrome or black & contains two-pieces to shroud the neck & extend down the frame adding brilliance to an otherwise dull area. The Deluxe Kit adds two snap-on downtube covers to add coverage almost all the way to the footboard mounts. Easy to install & great looking, this is a truly first class part!
8168
Fits:’95-’05 Electra Glides, Road Glides, Tour Glides & Road Kings
8146
Deluxe Neck Covers (set)
$
8168
Neck Covers, Chrome (pr)
$
7864
Neck Covers, Black (pr)
$
8227
Snap On Tube Covers (updates P/N 8168 to P/N 8146) (pr)
169.99 155.99 155.99
$
49.99
Latus Motors Harley-Davidson 7834
deluxe neck covers
Fits Yo ur ‘08 or ‘09 To uring Mo d el!
7834
Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (set)
$
7832
Fits: ’09 Electra Glides, Road Glides, Street Glides & Road Kings (set)
$
¸ CHROME
Masking the unfinished look of welds & wires with flair & ease! These Deluxe Neck Covers designed specifically for the ‘08 & ‘09 Touring Models ensure your bike will get a second look. 199.99 199.99
neck covers for Dyna
We developed this stylized chrome cover to put a visually pleasing face on this beefy section of the Dyna frame. Welds, square edges, joints & wires are neatly hidden from view. The neck cover’s contours complement the shape of the fuel tank & the added glint of vibrant chrome looks great with any paint job! Fits: ‘06-’09 Dyna (except ‘06-’08 FXDWG)
7836
Neck Covers for Dyna (set)
145.99
$
W W W . K U R Y A K Y N . C O M
121
Latus Motors Harley-Davidson chrome engine
AA M I D - F R A M E C O V E R
BB S T A R T E R C O V E R
/ pg 136 / #8239
/ pg 135 / #7847
CC S A D D L E S H I E L D S
/ pg 17 5 / #1188
DD T R A N S M I S S I O N S H R O U D S
EE R E A R C Y L I N D E R B A S E C O V E R
FF T A P P E T B L O C K A C C E N T
/ pg 129 / #7877
/ pg 124 / #8389
GG C H A S I N G L . E . D . T I M I N G C O V E R
HH R E A R M A S T E R C Y L I N D E R C O V E R
II C L U T C H C A B L E A D J U S T E R
122
KK D E L U X E N E C K C O V E R S
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
/ pg 1 2 4 / #1302
/ pg 118 / #9128
/ pg 58 / #2017
JJ P E A K E D R O C K E R B O X B O L T C O V E R S
C
/ pg 12 9 / #8394
/ pg 127 / #8372
/ pg 120 / #7866
A B
Latus Motors Harley-Davidson S TREE T GLIDE
— ENGINE
K
J
I ¸ CHROME
F E
D G
H
W W W . K U R Y A K Y N . C O M
123
Latus Motors Harley-Davidson chasing l.e.d. timing cover Patent Pending
Like a window into your motor’s soul, the mesmerizing effect of the chasing lights moving in rhythm with engine speed give life to the heart of your bike. Select red, lime, ice blue, sky blue, dark blue, purple or green, or hues fading continuously from one to the next, spinning circles timed by engine RPM’s. Or if desired, single or continuously changing colors may be lit solidly. This easily installed kit contains chrome timing cover with multi-function L.E.D.’s, wiring & controller.
8389
Fits: All ‘84-‘99 Evolution Big Twins, all ‘99-‘09 Twin Cams, & ‘86-‘09 XL
1302
Chasing L.E.D. Timing Cover (ea)
1303
Replacement Switch (ea)
4768
250V/3 Amp Fuse (ea)
189.99
$
$
69.99
$
3.99
8389
tappet block accent for Twin Cam Patent Pending
7 Co lors in O ne!
So clean & so simple! Nothing could be easier than to add this cover to your exposed engine case. Its chrome style accents the stock tappet blocks & makes a big difference. Fits: All ’99-’09 Twin Cam Engines
8389
Tappet Block Accent (ea)
$
69.99
Note: Not compatible with Küryakyn Tappet Block Covers (P/N 8230).
O ff
bridge the gap heat shield U.S. Patent D523,787 B e fo r e
Take the blues away with this perfectly designed heat shield. Quickly & easily installed, this piece integrates seamlessly & bridges the ugly gap left between the stock heat shields. Fits: ’93-’08 Electra Glides, Road Glides, Tour Glides, Street Glides & Road Kings with stock head pipes & heat shields
9196
Bridge the Gap Heat Shield (ea)
A ft e r 124
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
$
39.99
Choose Steady or Chasing Illumination! Chasing Illumination Creates a Ring of Light that Runs in Circles Timed with your Engine Speed!
Latus Motors Harley-Davidson
infinity timing cover U.S. Patent 7,029,152
Let this cover take you to infinity & beyond with it’s 7-color L.E.D. spectacle of lights. This truly unique cover comes to life from its mirror-like chrome resting state to a virtual vortex of lights once ignited. Make all your friends envious of this one-of-a-kind cover! Fits: All ‘84-’99 Evolution Big Twins & all ’99-’09 Twin Cam Engines
1301
Infinity Timing Cover (ea)
4715
Replacement Switch/Controller (ea)
4768
250V/3 Amp Fuse (ea) L o ok s
176.99
$
$
31.99
$
Gr eat
3.99
O ff
W ith ...
infinity air cleaner cover
A sight to see! Turn some heads with our matching Air Cleaner Cover. See Pg 207
Works great with our New Remote Control (P/N 4799 - pg 36)! P/N 8416
tappet block covers
Transform your stock cast aluminum or wrinkle black finish to glistening chrome.
These Tappet Block Covers are styled to complement the stock cam cover. The Blood Groove detail matches many other Küryakyn covers.
Fits: ‘91-’03 XL Models
8124
¸
for Twin Cam
Tappet Covers (pr)
$
49.99
CHROME
tappet block covers for XL
Fits: All ‘99-’09 Twin Cams
chrome cv carb top
8230
Fits: All ‘88-’06 CV Carburetors Smooth Chrome CV Carburetor Top (ea)
$
69.99
Note: Not compatible with Küryakyn Tappet Block Accent (P/N 8389).
Perk up your stock carburetor.
9096
Tappet Covers for Twin Cam (pr)
15.99
$
tappet block covers for Evolution Big Twin
Our realistic-looking, bolt-on, heavy die-cast, show chrome covers come complete with polished stainless screws. They install in minutes. Fits all ’84-’99 Evolution Big Twins (requires minor modifications to stock airbox). Use on FLT Models with large, two terminal sending unit requires the use of our Oil Pressure Sender Cover (P/N 1600).
saturn point cover Fits: ’70-’99 Big Twin (except Twin Cam 88) & ’71-’03 XL Models
1300
Saturn Point Cover (ea)
$
39.99
8123
Tappet Covers for Evo Big Twin (pr)
$
69.99 W W W . K U R Y A K Y N . C O M
125
Latus Motors Harley-Davidson
Horn Covers
P aint e d B lac k Chr om e Availab le! 7741
skull horn cover
1563
The stock cowbell horn cover is a great look for ol’ Bessie, but not on your bike! It lacks attitude. Here’s a better idea…the Skull Horn Cover. Stick this wicked ABS cover onto your stock cowbell & turn bovine to bad in an instant!
7718
7718
Chrome Skull Horn Cover (ea)
7741
Painted Black Chrome Skull Horn Cover (ea)
infinity zombietm horn cover
Chasing L.E.D. Contr o lle d By Eng ine RPM!
O ff
O ff
U.S. Patent 7,029,152
Gaze into the face of the Zombie. You’ll see a world beyond paint or simple chrome. The amazing infinity effect uses multi-color L.E.D.’s to give the chrome skull’s eyes & nose endless depth while illuminating steadily, flashing, or continuously fading through an array of colors at any frequency you desire. Use the included controller or connect to other Infinity or Lizard Light accessories. This remarkable horn cover directly replaces the stock H-D cowbell style cover.
7719
Infinity Zombie Horn Cover (ea)
189.99
$
phases of chasing lighting: 1
2
C H A S I N G
3
L . E . D . ’ S
S I M U L AT E
4
S P A R K
T R AV E L !
chasing l.e.d. coil cover for Softail Patent Pending
Ride the lightning! Add visual excitement to your H-D’s thunder as you watch the illusion of energy exploding from the coil to the spark plug wires in time with engine speed. Select red, lime, ice blue, sky blue, dark blue, purple & green or have the colors continuously morph from one to the next. If desired, the L.E.D. display can also be lit constantly with the same color options. Fits: All ’01-’09 Fuel Injected Softail Models (except Rocker/C)
126
1563
Chasing LED Coil Cover (ea)
1303
Replacement Switch (ea)
4768
250V/3 Amp Fuse (ea)
C U S T O M E R
C A R E
$
239.99
$
C E N T E R
69.99
$
3.99 8 7 7 - 3 7 0 - 3 6 0 4
Rendering Shown
Three Spectacular Modes:
• Paint Mode • Single Color-Steady Illumination • Single Color Flashing With Variable Rate
Latus Motors Harley-Davidson 8128
8128
scorpion spark plug-head bolt covers for Twin Cam
8323
Scorpion Spark Plug-Head Bolt Covers add a classy touch to the Twin Cam engine. These covers are held in position with set screws, ensuring rattle-free performance. With this design, the spark plugs can be removed without taking the covers off.
v-shield horn cover
The V-Shield Horn Cover will fit all ’92-’09 H-D Big Twins (carbureted & injected), as long as the stock horn is located between the cylinders.
Fits: All ‘99-’09 Twin Cam Engines
8323
Scorpion Spark Plug-Head Bolt Covers (pr)
$
49.99
8128
V-Shield Horn Cover (ea)
$
79.99
scorpion spark plug-head bolt covers for Evolution
lazer nodestm You can see if you have spark without pulling the plugs—you’ll see a flash of light every time your plugs fire. Install in minutes. They work with electronic or standard ignition, double-sealed & tested. Fits most vehicles with exposed wires.
These high quality covers place a fine chrome finish on hardware that easily becomes rusty or corroded. Fits: H-D Evolution Big Twins & XL (Does not fit ‘04-’09 XL or Screamin’ Eagle Evolution head)
8315
Not for use on fuel injected H-D Models.
Red Lazer Nodes (pr)
$
25.99
2021
Amber Lazer Nodes (pr)
$
25.99
2022
Blue Lazer Nodes (pr)
$
25.99
$
39.99
stiletto head bolt covers Bring the cutting edge look of our Stiletto line to your top end with our Stiletto Head Bolt Covers. Beautiful chrome & simple installation. Fits: All ’87-’09 H-D Models
scorpions for S&S Engines 8369
Fits: S&S Super Stock 96” Engine (pr)
$
8107
$
39.99
51.99
peaked rocker box bolt covers
8300
firedomes & head bolt covers
Stiletto Head Bolt Covers (Set/4)
¸ CHROME
2020
Scorpion Spark PlugHead Bolt Covers (pr)
The final touch that makes the difference. Chromeplated billet aluminum construction with simple push-on installation.
8106
Fits: All ’99-’09 Twin Cam Engines
Firedomes are a quick & easy way to dress up the dull hex of your spark plugs while Headbolt Covers hide the whole bolt head.
8300
Chrome Firedomes Fits: Evo Big Twin, Shovelhead, Iron XL (pr)
$
8304
Chrome Firedomes Fits: Evo XL & Twin Cam (pr)
$
8106
Headbolt Covers Fits: All ‘87-’09 H-D Models (Set of 4)
$
8104
Firedome & Head Bolt Cover Set Fits:’99-’09 Twin Cams & ’87-’09 Sportsters (set)
$
20.99
25.99
stiletto rocker box bolt covers
39.99
Peaked Rocker Box Bolt Covers (set/4)
$
8693
Peaked Rocker Box Bolt Covers (set/6)
$
20.99 31.99
A classy way to dress up your bike’s exposed rocker box bolts with this simple precision fitted push-on chrome cover. Fits: All ‘99-‘09 Twin Cam Engines
20.99
8372
8144
Stiletto Rocker Box Bolt Cover (set/4)
8372 $
39.99
Note: Cover extends 5/8” above top surface of the rocker box bolt. Be sure there is adequate clearance above the bolts you intend to cover. W W W . K U R Y A K Y N . C O M
127
Latus Motors Harley-Davidson
engine covers
8274
8201
8264
oil line cover & transmission shroud No custom Twin Cam will ever be complete without this beautiful cover. After this easy installation, the rough cast area around the transmission & oil lines disappear under a layer of luscious chrome.
8208
Fits: All ’99-’05 Dyna Models (ea)
$
59.99
8209
Fits: ’99-’01 Road Kings & ’00-’01 Electra Glides (Not shown – appearance similar to P/N 8208) (ea)
$
69.99
8201
Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings (ea)
$
93.99
8208
oil filler spout cover
rear cylinder base cover for Touring Models
This really cleans up that dull, drab area around your oil filler neck. Chrome-plated die-cast construction with easy installation.
This cover from Küryakyn elegantly conceals the area between the transmission top cover & the rear cylinder. Install by itself or as the perfect complement to our Oil Line Cover & Transmission Shroud (P/N 8201) & Oil Filler Spout Cover (P/N 8264).
Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (except Screamin’ Eagle Models with 103” engine)
8264
Oil Filler Spout Cover (ea)
$
59.99
8274
Note: Compatible with H-D Engine-Transmission Interface covers (H-D P/N’s 66503-00, 66503-02, 66096-02).
128
C U S T O M E R
C A R E
C E N T E R
Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings Rear Cylinder Base Cover (ea)
$
39.99
Note: Can be used with other H-D covers with minor modifications.
8 7 7 - 3 7 0 - 3 6 0 4
Latus Motors Harley-Davidson transmission shrouds for Touring Models Transform the right side of your awesome Twin Cam engine with these easy to install, luxurious covers. Available for bikes equipped with stock headpipes or aftermarket True Dual pipes.
7877
For Motorcycles Equipped with Stock Head Pipes: 7876
Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings (set)
$
8654
Fits: ’09 Electra Glides, Road Glides, Street Glides & Road Kings (ea)
$
169.99 119.99
Note: P/N 8654 will fit ’09 Touring Models with Küryakyn & V&H True Dual Head Pipes where the rear head pipe is routed in the same manner as the stock rear head pipe.
For Motorcycles Equipped with True Dual Head Pipes: 7877
Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings (set)
169.99
$
Note: P/N 7877 will fit ’09 Touring Models if equipped with aftermarket True Dual Head Pipes where the rear head pipe exits over the top of the transmission to the left side of the bike.
8654
rear cylinder base cover Nestles right behind your rear cylinder. What a difference, & real easy to install.
8147
Rear Cylinder Base Cover Fits: All ’93-’95 FLT Models (ea)
$
31.99
7876
¸
rear cylinder base cover for Touring Models
CHROME
Rendering Shown
Q uic k ly, & Inexp ensiv ely e va m p Effor tlessly R Yo ur Eng ine!
This inexpensive, chrome-plated cover can be added to our Transmission Shrouds (P/N’s 7876 or 7877) to clean up the black hole behind the rear cylinder on your Twin Cam engine. Fits: ‘07-’09 Electra Glides, Road Glides, Street Glides & Road Kings with Küryakyn Transmission Shroud (P/N’s 7876 or 7877)
8394
Rear Cylinder Base Cover (ea)
$
49.99
Note: Requires Küryakyn Transmission Shroud for installation.
W W W . K U R Y A K Y N . C O M
129
Latus Motors Harley-Davidson deluxe cast chrome inner primary cover for Touring Models
8294
Now the awesome look of a chromed Inner Primary Housing is possible without the expense, hours of work, & down-time needed to chrome the OEM piece. This quality die-cast cover goes over the existing inner primary, providing a smooth surface covering the visible rough cast areas of the stock chaincase. Fits: ‘90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
8294
Deluxe Cast Inner Primary Cover for Touring (ea)
114.99
$
8295
inner primary cover extension If you’re using a 2-1 or staggered performance exhaust with our 8294 Inner Primary Cover, this extension covers the area where the crossover pipe had been.
8299
8295
Inner Primary Cover Extension (For use with P/N 8294 Only) (ea)
inner primary cover front extension This handy little cover will put the finishing touches on your Dresser or Road King inner primary. It picks up right where our 8294 Inner Primary Cover left off to cover the shift pivot area & grease fitting. It only takes a moment to install. Fits: ‘90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
deluxe cast chrome inner primary cover
8370
Inner Primary Cover Front Extension (ea)
$
39.99
for Softail & Dyna
Because of its die-cast construction, this cover provides a precise fit & a classy three-dimensional look. Nicely formed edges give this cover a creamy, flowing appearance that enhances the entire primary area. Four mounting points insure secure, quiet operation. (8299, 8292, & 8293 are not compatible with rear suspension lowering kits.)
8299
Fits: ’89-’99 Softail Models (except ‘97-’99 FLSTS) (ea)
$
8291
Fits: ’00-’06 Softail Models (works with lowered bikes) (ea)
$
8293
Fits: ’93-’02 FXDWG (ea)
$
8292
Fits: ’91-’05 Dyna Models with mid controls (ea)
$
103.99 114.99 114.99 114.99
Note: 8293 will fit ’93-’02 Dyna Models outfitted with H-D forward control (P/N 49080-93) or Küryakyn Forward Controls.
130
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
cylinder base/timing hole cover Our Cylinder Base Cover cleanly smooths the transition from the cylinders to the engine case. Installs in no time.
8140
Fits: ’84-’99 H-D Evo Big Twins with forward controls or floorboards (ea)
$
39.99
8254
Fits: S&S Super Stock 88”, 96”, 98”, 103” Evolution Style Motor (ea)
$
49.99
$
49.99
Latus Motors Harley-Davidson 8398
inner primary covers U.S. Patent D581,322
Transform your bike by adding these smooth lines to your inner primary. Fits perfectly with the existing stock engine case & primary housing. For an even more fabulous look, add Küryakyn Cylinder Base Covers for a look that’s beyond compare! (Sold separately)
8397
Fits: ’07-’09 Electra Glides, Road Glides, Street Glides & Road Kings (ea)
$
8398
Fits: ’07-’09 Softails (except Rocker/C) (ea)
$
Fits: ’06-’08 FXDWG, ’08-’09 FXDF with forward controls (ea)
$
Fits: All ‘06-’09 Dyna with Mid Controls (ea)
$
139.99
139.99
8397
Note: Rear section cannot be installed in FLSTSC.
8399
139.99
Note: Can also be used on any ’06-’09 Dyna converted to forward controls.
8377
135.99
8392
cylinder base covers
8393
These covers were born to be part of your Harley. They beautifully highlight the transition from cylinder to engine case. The perfect complement to Küryakyn Inner Primary Covers. (Sold separately) Fits: ’07-’09 Electra Glides, Road Glides, Street Glides, Road Kings & ’06-’09 Dyna Models (ea)
$
69.99
8393
Fits: All ‘07-’09 Softail Models (ea)
$
69.99
CHROME
8392
¸
cylinder base cover
cylinder base cover
for Sportster
for Twin Cam
This great looking, easy-to-install Cylinder Base Cover looks awesome on Sportster engines. The perfect accent to finish off your engine.
Smooths the transition between the cylinders & the engine cases. This form-fitting cover chromes the entire gap between the cylinder base & the inner primary. No more cast finish to discolor & get nasty looking. Clean-up on this area will be a snap compared to the stock roughcast aluminum, & you’ll add some major sparkle to the left side of your bike.
Fits: All ’91-’03 Sportster Models
8141
Cylinder Base Cover for Sportster (ea)
$
39.99
Fits: ’00-’06 Softails, ’99-’06 Electra Glides, Road Glides, Street Glides, Road Kings, ’99-’05 FXDWG & any ’99-’05 Dyna Models converted to forward controls
8143
Cylinder Base Cover for Twin Cam (ea)
$
62.99
W W W . K U R Y A K Y N . C O M
131
Latus Motors Harley-Davidson 7838
transmission shroud for Dyna Patent Pending
Create a shining example of just how good a Dyna engine & transmission can look! Install the Transmission Shroud & the rough, irregular cast surface will vanish leaving a sparkling, smooth new finish. We’ve added a second version for motorcycles with aftermarket exhaust systems that do not retain the stock rear exhaust support bracket. If you have replaced your stock exhaust & are not certain if the stock bracket was reused, we suggest you purchase P/N 7838.
7837
Fits: ’06-’09 Dyna Models
7837
Transmission Shroud for Dyna (ea)
$
7838
Transmission Shroud for Dyna with Aftermarket Exhaust (ea)
$
139.99 139.99
transmission shroud for Softail
This part is awesome. We know you’ll probably tell your buds you pulled the tranny out last week & had her show chromed to impress `em. We won’t tell anyone you just bought our cover & spent 5-10 minutes installing it.
8198
Fits: ’91-’99 Softail (ea)
$
8205
Fits: ’00-’06 Softail (Does not fit Models with hydraulic clutch) (ea)
$
62.99 69.99
oil line nacelle for Twin Cam Softails
8205
This die-cast chrome cover hides the wrinkle black or plain cast surface between the cam cover & transmission. The stock chrome oil lines poke through the center of the cover for a high-tech appearance. We highly recommend our chrome Transmission Shroud with this cover for maximum flash. Fits: All ‘00-’06 Softail Models
8204
Oil Line Nacelle for Twin Cam Softails (ea)
$
62.99
clutch cable ferrule accent This slip-on chrome accent is a great way to eliminate the unfinished transition between the clutch cable & the transmission or primary cover. Fits: Clutch Cables on ’87-’99 Big Twin & ’91-’06 Sportsters
2024
Clutch Cable Ferrule Accent (ea)
19.99
$
Note: Does not work with Küryakyn Transmission Shrouds (P/N 8198, 8208, 8209).
132
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Latus Motors Harley-Davidson 8656
7878
transmission shroud for Softail
7878
Patent Pending
Fill in the void behind the transmission & cover the rear part of the rough cast transmission case with this chrome cover. A great way to complement the existing chrome transmission end cover & oil tank.
8395
Fits: All ‘07-’09 Softail Models
7878
Transmission Shroud for Softail (ea)
$
93.99
8656
rear cylinder base cover for Softail Patent Pending
Fits: All ’07-’09 Softail Models (except Rocker/C or FLSTSC with stock head pipes)
8656
Rear Cylinder Base Cover for Softail (set)
103.99
8395
deluxe oil line nacelle for Softail
¸
Our Oil Line Nacelle blankets the area between the cam cover & transmission. It surrounds the oil lines & covers the exposed clutch cable where it enters the transmission end cover. Installs easily & is the perfect complement to our Transmission Shroud & Tappet Block Accent.
CHROME
When it comes to chroming the engine area of your bike, there’s one simple rule: More is better! This easily installed three-piece kit adds a silky smooth layer of shimmering chrome to the area between the transmission top cover & rear cylinder, & even the seat post. A natural complement to the Deluxe Oil Line Nacelle (P/N 8395), this large chromed area will come alive in sunlight & showcase any custom accent lighting such as our incredible Super Lizard Lights.
Fits: All ‘07-’09 Softail Models
$
8395
Deluxe Oil Line Nacelle (ea)
$
72.99
oil line cover
for Twin Cam Softail
Harley did a great job with the chrome & braided stainless exposed oil lines on the Twin Cam Softails, but they tried to sneak by with a plain rubber line on the right side beneath the oil tank. They figured no one would notice… we did! So we designed a slick, chrome two-piece cover to dress it up. Fits: All ‘00-’09 Softail Models (except Rocker/C)
Always use Anti-Seize on the threads before assembling chrome, stainless steel or nylon inserted nuts or bolts. Otherwise a c o l d w e l d c o n d i t i o n w i l l o c c u r.
8223
Oil Line Cover (ea)
$
39.99
Note: Not compatible with Küryakyn Transmission Shroud (P/N 7878).
W W W . K U R Y A K Y N . C O M
133
Latus Motors Harley-Davidson
oil filler cap accents Embellish your oil filler cap with our easy peel-&-stick chrome accents! The perfect complement to our Oil Filler Spout Cover (P/N 8264). Measuring 1-7/16” in diameter, they can be used universally to accent many other locations (fork tube caps, etc).
zombie oil filler cap tm
U.S. Patent D545,746
Whether you’re into Zombies or not - your bike cries out for this part to perk up that dull oil filler cap. This chrome-plated, die-cast cap is easy to install & makes checking your oil a breeze!
Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings & ’99-’05 Dynas
8263
Peaked Oil Filler Cap Accent (ea)
$
8259
Flag Oil Filler Cap Accent (ea)
$
17.99
16.99
Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings & ’99-’05 Dynas
1052
Zombie Oil Filler Cap (ea)
trident oil filler cap
Don’t have or can’t find a big ol’ allen wrench to check your oil? Not a problem! Just twist the handy thumb screw on our “instant” check dipsticks anytime you feel the urge.
Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & ’99-’05 Dynas
1053
Trident Oil Filler Cap (ea)
29.99
C A R E
1012
’80-’86 5-Speed Big Twin, Chrome (ea)
$
1010
’80-’86 5-Speed Big Twin, Red (ea)
$
1014
’80-’86 5-Speed Big Twin, Blue (ea)
$
1016
’80-’86 5-Speed Big Twin, Black (ea)
$
2019
Fits: ’96-’98 Dyna (ea)
$
51.99
2033
Fits: ’91-’95 Dyna (ea)
$
51.99
8 7 7 - 3 7 0 - 3 6 0 4
$
Fits: All ’80-’97 5-Speed transmissions
2034
C E N T E R
’87-’06 5-Speed Big Twin, Chrome (ea)
Styled to match our popular Banjo Bolt & Clutch Cable Ferrule Covers, this little number makes the plain aluminum switch & wire connector in the middle of a beautifully chromed cover disappear.
vellotm coil cover
C U S T O M E R
1013
neutral switch cover
W h e n i n s t a l l i n g t h e Z o m b i e o r Tr i d e n t O i l Filler Caps, twist the cap a few turns with downward pressure to ensure the flange of the stock dipstick plug is fully seated in the groove in the cap. Install dipstick & verify cap is secure before riding bike.
134
49.99
insty-check dipsticks
The Trident Oil Filler Cap will certainly set your ride apart. This chrome-plated die-cast cap replaces your stock, plain black metal top. It’s easy to grab & easy to install while adding a much higher cool factor.
$
$
Neutral Switch Cover (ea)
17.99
$
29.99
20.99 18.99 18.99 18.99
Latus Motors Harley-Davidson B e fo r e
A ft e r
8638
starter cover
Patent Pending
Here’s one of the nicest details for Touring Models we’ve developed yet. This one simple cover turns the hodge-podge of the starter solenoid & all of its related wiring into one sculpted, glistening unit. It’s designed to work with the stock starter end cover & complement our Transmission Shroud & Cylinder Base Cover. Now this once dull, unattractive part of your bike will sparkle in sunlight or accent lighting, & be easier to keep clean too!
8639
for Screamin’ Eagle Electra Glides & Road Kings
Patent Pending
We’ve added more Starter Cover offerings so you can now dress up the starter & surrounding wires on H-D’s CVO Models. These beautifully chromed cover sets cover the solenoid, the end of the starter motor & associated wiring.
8638
Fits: ‘07-’09 FLHTCUSE, ’07-’08 FLHRSE, ’09 FLTRSE (ea)
$
89.99
8639
Fits: ’03 FLHRSE, ’04-’05 FLHTCSE, ’06 FLHTCUSE (ea)
$
89.99
7847
Fits: ’07-’09 Electra Glides (except ’07-’09 FLHTCUSE), ’07-’09 Road Glides (except ’09 FLTRSE), ’07-’09 Street Glides, & ’07-’09 Road Kings (except ’07-’08 FLHRSE) (ea)
$
69.99
7846
Fits: ’99-’06 Electra Glides (except ’04-’05 FLHTCSE & ’06 FLHTCUSE), ’99-’06 Road Glides, ’06 Street Glides, & ’99-’06 Road Kings (except ’03 FLHRSE) (ea)
$
69.99
starter connector plug cover chrome oil sender switch cover U.S. Patent D352,258
This rubber-lined, easily installed die-cast cover is a must. Fits: All ’84-’99 Evo Big Twins except Models equipped with large 2-terminal sending units
8136
Oil Sender Switch Cover Set
$
29.99
oil pressure sender cover for ‘87-’98 FLHTC & FLTC Models
A sleek, smooth & beautifully chromed add-on.
Oil Pressure Sender Cover (ea)
¸
The white plastic electrical connector on top of the starter just looks out of place. Here’s a quick & easy cure.
9050 2025
Fits: ‘96-’06 Evo Big Twin & Twin Cam Starters
1315
Starter Connector Plug Cover (ea)
$
25.99
Note: Intended for Touring & Dyna Models. This connector is covered by oil tank on Softail Models.
chrome solenoid cover
9050
frog mouthtm neutral switch cover
Keep your stock domeshaped starter motor cover & add this trick little Solenoid Cover.
Fits: ’87-’98 FLTC & FLHTC Models with large 2-terminal sending units
1600
1315
$
29.99
CHROME
starter covers
2025
Fits: ’90-’06 Big Twin Starters, ’91-’09 XL1200, & ’95-’09 XL883 (not for use with full coverage starter end covers)
9050
Chrome Solenoid Cover (ea)
19.99
$
Conceal both the switch body & the stock rubber insulators! Installation is a breeze. Fits: ’98-’05 Dyna, ‘98-’09 Electra Glides, Road Glides, Street Glides & Road Kings
2025
Frog Mouth Neutral Switch Cover (ea)
19.99
$
W W W . K U R Y A K Y N . C O M
135
Latus Motors Harley-Davidson 7842
mid-frame cover for Dressers & Road Kings Create a smoother, creamier look by concealing unsightly frame welds with this luscious, chrome-plated steel cover. Installs easily in just a matter of minutes. Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings (pr)
$
7842
Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (pr)
$
8609
Fits: ’09 Electra Glides, Road Glides, Street Glides & Road Kings (pr)
$
8239
103.99
U.S. Patent D518,760
103.99
8239 119.99
mid-frame cover for Softail
Here’s a quick & easy way to conceal the frame’s top tubes on ‘00-’07 Softails. Our creamy smooth chrome covers tuck in behind the fender struts & slip up under the fuel tank.
8239
8240
Mid-Frame Cover (set) Fits: All ’00-’07 Softail Models (except ‘00-’07 Deuce, ‘06-07 FXST, FXSTB, FXSTC, FXSTS) equipped with a seat that fastens to the rear fender ONLY
$
93.99
8251
Mid-Frame Cover (set) Fits: ’00-’07 Deuce with stock or aftermarket seat, all ’00-’07 Softail Models (except ‘06-07 FXST, FXSTB, FXSTC, FXSTS) equipped with an aftermarket seat that fastens to the sides of the frame
$
93.99
10 -5 /8
”
7857
behind the engine Frame Cover
This large show chromed cover fills that nasty black hole behind your rear cylinder & starter 12-1/4” while perfectly hiding the gap between the y-frame member. No drilling or modifications necessary for Cruise Control Equipped Models. If you have L.E.D.’s lighting your engine, this helps reflect light & makes that area sparkle! Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings
7857
136
Behind the Engine Frame Cover (ea)
C U S T O M E R
C A R E
C E N T E R
103.99
$
8 7 7 - 3 7 0 - 3 6 0 4
Note: As a general rule, FXST Models come from the factory with seats that fasten to the rear fender only. Custom seats may not fasten the same way as the O.E.M. seat. To ensure you select the correct frame covers, take a moment to confirm how the seat is mounted before ordering. The Deuce, because of its unique fender struts, will always use P/N 8251.
Latus Motors Harley-Davidson
FLA F LA AM ME™ E™ FLO FL F LO L OORB BO OA OAR AR RD COV COVERS OV E OV ERS R PG 78
CHROME
¸ ALSO AVAILABLE: PEGS PG PEG G 67 67 WIN IN N DS D S HIIEL DSH IE ELD EL D PG P G 172 72 BRA BR B R A KE E PE PEDAL PED A PAD AD D S PG G 67 67 PA PAS A S SEN S SE GE GER ER BO BOAR ARD RD D CO COVER OV VER ER S P PG G 140 140 P SSEN PAS SEN ENGER E ER BOARD E ARD RD D IN INSER I SE SER ER RT TS S PG G 78 78
F LA FL FLA L A ME™ ME E™ E ™ SH S H IFT I FT T LI L I NKA LINKA NK KA K AG GE E &S SHI SH HII F H FT TA ARM RM M CO COV VE VER ER ER PG P G9 93 3 IISO SO O ®--F -FL F L AME FL AM A ME M E G I PS GR GRI P S PG PG 47 7 FL FLAME™ FLA L ME™ LA E™ E ™ SP PE EAK AK A KE ER R GRI GR R LLS L S PG LS PG 102 02
W W W . K U R Y A K Y N . C O M
137
Latus Motors Harley-Davidson chrome REAR END
C
A
B
138
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Latus Motors Harley-Davidson SCRE A MIN’
E AGLE ULTR A
— RE A R
END
Rendering Shown
lid accents for H-D Tour-Pak® These chrome accents really highlight the tasteful look of the H-D King, Chopped, or Ultra Tour-Pak. Their swept styling looks great when combined with luggage racks & matching Saddlebag Trim. Besides the visual appeal, they also provide protection to the lid’s top edges that are very susceptible to nicks & other damage. Highstrength peel-&-stick adhesive assures they’ll stay securely in place. Fits: ’80-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings equipped with King, Ultra, or Chopped Tour-Pak.
8647
Tour-Pak Lid Accents (pr)
$
A
colossus rear trim
for Ultra Tour-Pak® Light Bar
If your bike wasn’t noticed before, it sure will be now! This classy chrome Tour-Pak trim applies right over the stock black Tour Pak light bar. Besides the striking chrome finish that looks incredible with any paint scheme, the smoked lenses appear to be chrome, but illuminate red when the lights are activated. Also, the chrome center panel can be left chromed, painted to match the bike’s color, or removed completely allowing the stock Harley Davidson script to be proudly framed.
49.99
Fits: ’93-’09 Ultra Classic Electra Glides & ’93-’96 Ultra Classic Tour Glides
8666
Colossus Rear Trim for Ultra Tour-Pak Light Bar (ea)
189.99
$
Complet e th e Lo ok Ac cents with Saddlebag Lid 1) (P/N 8646 - pg 14
CHROME
C
¸
hinge covers for H-D Tour-Pak® When perfection hinges on detail, these little cover-ups really shine! Our beautifully chromed aluminum hinge covers install quickly & securely over the tired looking OEM stainless pieces. You’ll be amazed at the life these give to any paint job. Fits: ’89-’09 Electra Glides, Tour Glides, or any Touring Model equipped with a King, Ultra, or Chopped Tour-Pak
8648
Hinge Covers (set)
$
49.99
Rendering Shown
B
lower lighted trim for Tour-Pak®
Break free from the ordinary! We’ve combined a graceful 3-D shape & new lens technology to breathe life into the Tour-Pak. These chrome accents install right over the stock red lenses or chrome accents providing sleek styling & additional back lighting. Rear facing lenses are lit with red L.E.D.’s, which may be wired for auxiliary run/brake, or run/ turn function. Lenses on the sides feature a new finish which appears as chrome, but will allow the red lights in an Ultra Tour-Pak to shine through. Fits: ’94-’09 Electra Glides, Tour Glides, & any other Touring Models that have been equipped with King or Ultra Tour-Pak
8650
Lower Lighted Trim for Tour-Pak (ea)
189.99
$
W W W . K U R Y A K Y N . C O M
139
Latus Motors Harley-Davidson
right rear lower frame cover for FL Patent Pending
By adding this classy stamped Lower Frame Cover, you’ll create a pleasing transition out of what was visual chaos. This beautifully chromed embossed cover creates a perfect bridge between the stock painted side cover & the passenger floorboard area, eliminating exposed frame tubes & the rear rubber isolation mount. A great addition to Mid Frame Covers! Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings
7829
infinity saddlebag latches U.S. Patent 7,029,152
The illusion of infinite depth & an array of solid, pulsing, or continuously changing colors that fade into oblivion; you’re going to have to see this to believe it. Multi-function L.E.D.’s emit red, lime, ice blue, sky blue, dark blue, purple & green. The complete kit includes everything you need; latch bodies, wiring, & the controller. Stock lock assemblies are retained. Alone or combined with other Infinity & Super Lizard lighting kits, the impact is indescribable. Fits: ’93-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags
1568
Infinity Saddlebag Latches (pr)
4715
Replacement Switch/Controller (ea)
4768
250V/3 Amp Fuse (ea)
$
239.99
$
31.99
$
3.99
passenger board covers It’ll be hard to beat these cutting edge Passenger Board Covers. Not only do they add an unmistakable look to the passenger boards, but their front edge incorporates a soft bumper to protect your legs when backing out of parking spaces or other tight spots. The Flamed version includes interchangeable Zombie & Maltese Cross Emblems. The Widow Board Covers satisfy the arachnid lover in all of us. Fits: ’86-’09 Electra Glides, Road Glides, Tour Glides, Road Kings, & ’86-’09 Softails with traditional passenger boards
140
4563
Flamed Passenger Board Covers (pr)
$
99.99
4564
Widow Passenger Board Covers (pr)
$
99.99
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
En d t h e t in g ! An k l e -B i
Right Rear Lower Frame Cover (ea)
$
69.99
Latus Motors Harley-Davidson 8646
8646 1595
saddlebag lid accents
It’s all about lines; if you’ve got ‘em, flaunt ’em! This chrome highlight brings out the sweeping style of your FLH saddlebags. Besides their great looks, you’ll also be protected from minor nicks & scratches to these areas. Made of flawlessly chromed ABS, just peel the backing off the high-strength adhesive & press the trim onto the clean saddlebag.
8645
Fits: ’93-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags
8646
Saddlebag Lid Accents (pr)
$
62.99
CHROME
¸ 1599
saddlebag latch accents Saddlebag latches are conspicuous on touring rigs & are a great place for a distinctive touch of style. The subtle grooved design adds an uncomplicated detail or add to your custom theme with the classic flamed version supplied with Maltese Cross, Zombie, & Widow emblems. Stock lock mechanisms are re-used so you won’t end up with another set of keys! Fits: ’93-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags
1595
Flamed Saddlebag Latch Accents (pr)
$
1599
Grooved Saddlebag Latch Accents (pr)
$
135.99
103.99
side cover & saddlebag accents
Patent Pending
Much like the work of an expert pin striper, these streamlined chrome accents work with the contours of the hard saddlebags & side covers to create a flowing, swept body line. Intended for use without saddlebag rails, they’ll add a classic, personal touch to your H-D Touring bike. Simple peel-&-stick installation requires only a few minutes & a real eye for style! Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags
8645
Side Cover & Saddlebag Accents (6 pieces)
124.99
$
W W W . K U R Y A K Y N . C O M
141
Latus Motors Harley-Davidson
lighted fender skirt
This subtle lighted chrome Fender Skirt is just enough to catch your eye without dominating the scene. Accented with a sliver of red L.E.D. light, it also serves as an auxiliary running & stop light. Installation is a breeze. Fits: ’98-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE
8644
Lighted Fender Skirt (ea)
119.99
$
8644
lighted lower saddlebag accents Patent Pending
If you want to get someone’s attention, whisper. The subtle, directional shape suggests forward motion while providing a fine chrome accent line that clings to the bottom edge of the saddlebag. The small rear-facing red lights operate as auxiliary run & brake lights & punctuate the trailing edge of this classy accent. Wired easily via plug connections on ‘97-’09 Models. Fits: ’93-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags
1564
Lighted Lower Saddlebag Accents (pr)
199.99
$
1564
Note: ‘93-’96 Models require lights be hard-wired into motorcycle.
saddlebag filler panels Fill the void between your fender & saddlebags with these classy ABS filler panels. The lower attach to the fender with pressure sensitive adhesive while the upper covers are secured by a simple mounting bracket. Choose chrome-plated or raw versions & have them custom painted to match your bike.
Lower Covers Only
Fits: ’95-’08 Dressers, Road Kings, Road Glides with or without H-D Detachable Docking Hardware Kits (53803-06 & 53804-06) –Not compatible with saddlebag rails
1192
Chrome Saddlebag Filler Panels (pr)
1195
Raw Saddlebag Filler Panels (pr)
103.99
$
$
83.99
Complete Four-Piece Sets
Fits: ‘95-‘08 Electra Glides, Road Kings & Road Glides with Hard Bags—Not compatible with saddlebag rails or H-D Detachable Accessories
1192
C U S T O M E R
Chrome Saddlebag Filler Panels (set/4)
$
1194
Raw Saddlebag Filler Panels (set/4)
$
159.99
135.99
Fits: ’95-’08 Road King Classics & Road King Customs with leather covered bags–Not compatible with saddlebag rails or H-D Detachable Accessories
1190
142
1191
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
1190
Chrome Saddlebag Filler Panels (set/4)
$
1193
Raw Saddlebag Filler Panels (set/4)
$
159.99
135.99
Latus Motors Harley-Davidson
hidden horns for Touring Models
r Transform Yo us! St o c k Mu ffler
Want to make sure you’re heard? Then these 115decibel horns will turn some heads! These trumpet horns won’t clutter up the side of that awesome V-Twin motor. The unique mounting position behind the saddlebag creates an enhanced blast when you sound the horn & removes the problem of bugs, water, & debris that plague other horns. This chrome-plated set includes a plug-&-play wiring harness that allows you to keep your stock horn if desired. Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
7740
Hidden Horns for Touring Models (set)
exhaust tips for Stock Touring Mufflers
176.99
$
The style of your exhaust system plays a major role in the overall attitude your bike displays. These clamp-on exhaust tips transform rather ho-hum stock mufflers into nostalgic Fishtails, Renderings Shown or a more modern Six Gun style in just a few minutes, & for a whole lot less cash than replacement mufflers. While sound levels & performance are unaffected, visual appeal is through the roof!
es N o w Fits B iko u t with & withles D e ta c ha b
Fits: ‘95-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
7607
Six Gun Exhaust Tips (pr)
$
7609
Fishtail Exhaust Tips (pr)
$
159.99
169.99
rear fender & saddlebag accents The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide & many CVO Screamin’ Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. Complete the look with the matching Rear Saddlebag Accents. Rear Fender Accent Fits: ’98-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE (ea)
$
8641
Rear Saddlebag Accents Fits: ’93-’09 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags (pr)
$
CHROME
8640
¸
31.99
44.99
saddlebag mount bracket accents Bolt them on & dress it up! Our bracket accents are a super easy way to cover up that lower saddlebag support where it meets the lower fender bracket. Three cool styles to choose from. Fits: ‘96-’08 Electra Glides, Road Glides, Tour Glides, & Road Kings
1596
Zombie Saddlebag Mount Accents (pr)
$
49.99
1597
Maltese Cross Saddlebag Mount Accents (pr)
$
49.99
1598
Grooved Saddlebag Mount Accents (pr)
$
49.99
Note: Not compatible with H-D’s Nostalgic Saddlebag Guard Rails.
Make it a Set...
front fender accent
You got the back-end covered; Now take care of the front! See Pg 111
P/N 8642 & 8643 W W W . K U R Y A K Y N . C O M
143
Latus Motors Harley-Davidson
B
A C
D
7858
A
inner fender accent for Softail
7867
B
Affordable, easy, & wow what a difference! This creamy chrome-plated stamped steel insert covers up your plain black plastic inner fender/splash guard. Just stick it on with double-sided tape & go!
144
7858
Fits: All ‘00-’06 Softail Models (except ‘04 FXSTDSE or ‘06 FXST, FXSTB, FXSTS, FLSTFSE) (pr)
7848
Fits: ‘07 Deuce, Deluxe, Heritage & Springer Classic (ea)
7867
Fits: All ‘08-’09 Softail Models (except ‘08-’09 Rocker/C) (set)
103.99
$
$
Note: This is one-piece for the right side of the bike.
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Next to brass knuckles, nothing says street tough like a sawed off shotgun. Jailbreak Larry dreamed up these hardcore belt guards & we’re bringing them to the street. Chrome-plated aluminum extrusions & castings with beechwood grips make these belt guards look like the real thing. Sturdy, welded brackets fasten to existing tabs on the swingarm. Go ahead, make my day!
1542
Side-by-Side Shotgun Belt Guard (ea) Fits: All ’00-’09 Softail Models (except ‘00-’07 Deuce, ’06-’09 FXST, FXSTB, FXSTC, FXSTS, ’07-’09 FLSTF, ‘08-’09 FLSTSB, ‘08-’09 Rocker/C)
$
1543
Over-Under Shotgun Belt Guard (ea) Fits: ‘00-’07 Deuce, ’06-’09 FXST, FXSTB, FXSTC, FXSTS, ’07-’09 FLSTF, & ‘08-’09 FLSTSB
$
59.99
119.99
$
shotgun belt guards
199.99
197.99
Latus Motors Harley-Davidson KÜRYA K Y NIZED
C
— SOF TA IL
RE A R
END
swingarm cover sets for ’08-’09 Softail
H-D threw us for a loop by redesigning the swingarm on the ’08-’09 Softails. We picked ourselves up, dusted ourselves off, & came up with this killer swingarm cover design. Undeniably, these kits are a great looking & affordable alternative to the downtime & expense of outfitting a Softail with a chrome plated swingarm! Our swingarm cover sets are offered in three packages:
Complete with Unlighted Phantom Covers• Super clean set covers the axle, upper & lower tubing, & the upper sections of the swingarm
7815
Fits: All ‘08-’09 Softails (except Fat Boy, Deluxe, or Rocker/C) (set)
7815 159.99
$
Note: Will fit Fat Boy & Deluxe if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.
Complete with Lighted Phantom Covers• Just like the Unlighted sets, but the Phantom Covers feature a band of rear facing, super bright red L.E.D.’s. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or brake lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multi-functional).
7814
Fits: All ‘08-’09 Softails (except Fat Boy, Deluxe, or Rocker/C) (set)
199.99
$
Note: Will fit Fat Boy & Deluxe if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.
Tube Covers Only-
7818
• Intended for riders that already have Küryakyn Phantom Covers or similar style axle covers • Covers upper & lower tubing & the upper sections of the swingarm • In some instances, depending on the coverage provided by the axle covers, there will be a small gap between the tubular swingarm covers & the axle covers. If the existing axle covers do not cover the weld between the axle plate & the tubing, there will be a gap. If the potential of this gap causes concern, we suggest purchasing one of our complete Swingarm Covers Sets. Fits: All ‘08-’09 Softails (except Rocker/C) (set)
7817
135.99
$
phantom covers for ’08-’09 Softail
Patent Pending
Not interested in chroming your entire swingarm, but want to hide the ugly axle & axle adjuster at the end of the swingarm? Then these are for you. The lighted version features a band of rear facing, super bright red L.E.D.’s. in each cover. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or brake lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multifunctional). Phantom covers are easy to install with a clean, streamlined design.
7816
¸ CHROME
7818
Fits: All ’08-’09 Softails (except Fat Boy, Deluxe, or Rocker/C)
7816
Lighted Phantom Covers (pr)
7817
Unlighted Phantom Covers (pr)
103.99
$
$
79.99
Note: Will fit Fat Boy & Deluxe if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.
D
lower belt guard accent
Patent Pending
From the factory, pieces like the lower belt guard are made of textured black plastic so they fade into the background. But when you’re trying to stand out & show off your beautiful machine, this stamped steel accent presents a great opportunity to add another gleaming chrome accent without the hassle of removing the stock guard. Combined with Küryakyn Swingarm Cover Sets & Fender Accents, you’ll end up with a fully chromed drive line that’s sure to make an impression! Fits: All ’00-’09 Softail Models (except Rocker/C)
8677
Lower Belt Guard Accent (ea)
$
83.99
Installs in Minu t es W W W . K U R Y A K Y N . C O M
145
Latus Motors Harley-Davidson 8256
swingarm cover sets for ‘86-’07 Softail Küryakyn Swingarm Cover Sets are offered in three packages:
Complete with Unlighted Phantom Covers• Super clean set covers the axle, upper & lower tubing, & the upper sections of the swingarm
8256
Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ‘07 FLSTF, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)
$
8284
Fits: ’00-’07 Deuce* (set)
$
8288
Fits: ’86-’99 Softail Models (set)
$
169.99 169.99 169.99
*Lighted & Unlighted Sets will fit ‘00-’06 FLSTF, ‘00-’07 Deuce or ‘05-’07 Deluxe ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.
Complete with Lighted Phantom Covers-
8102
•Just like the Unlighted sets, but the Phantom Covers feature a band of rear facing, super bright red L.E.D.’s. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or brake lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multi-functional).
8102
Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ‘07 FLSTF, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)
$
8698
Fits: ’06-’07 FXST, FXSTB, FXSTC, FXSTS, ‘07 FLSTF (set)
$
8221
Fits: ’00-’07 Deuce* (set)
$
8222
Fits: ’86-’99 Softail Models (set)
$
199.99 199.99 199.99 199.99
*Lighted & Unlighted Sets will fit ‘00-’06 FLSTF, ‘00-’07 Deuce or ‘05-’07 Deluxe ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.
8108
Tube Covers Only-
ensiv e Q uic k & Inexp Alt erna tiv e t o g Yo ur Chr om e -P la tin Swingarm!
• Intended for riders that already have Küryakyn Phantom Covers or similar style axle covers • Covers upper & lower tubing & the upper sections of the swingarm • In some instances, depending on the coverage provided by the axle covers, there will be a small gap between the tubular swingarm covers & the axle covers. If the existing axle covers do not cover the weld between the axle plate & the tubing, there will be a gap. If the potential of this gap causes concern, we suggest purchasing one of our complete Swingarm Cover Sets.
8108
Fits: ’00-’07 Softails (except ’00-’07 Deuce, ‘07 FLSTF, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)
$
8228
Fits: ‘86-’99 Softails (set)
$
135.99 129.99
phantom covers A great looking way to hide the unsightly axle & axle adjuster section of the Softail swingarm. Two versions offered. Lighted version contains super-bright red L.E.D.’s housed in a smoke lens capsule that fit into a recessed pocket on the trailing edge of the cover. These single circuit L.E.D.’s can be wired as auxiliary running lights or turn signals, or brake lights.
8200
Fits: All ‘86-’07 Softails Models (except ’00-’07 FLSTF, FXSTD, ‘05-‘07 FLSTN, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS)
8200
Phantom Covers, Chrome (pr)
$
79.99
8202
Phantom Covers, Gloss Black (pr)
$
79.99
8220
Lighted Phantom Covers (pr)
$
Note: Will fit ‘00-’06 FLSTF, ‘00-’07 FXSTD, or ‘05-’07 FLSTN if stock exhaust has been removed & replaced by a staggered dual or 2-1 system.
C U S T O M E R
C A R E
C E N T E R
This slick little pivot cover gives you a nice, clean finish on it in a matter of minutes. No tools needed for installation.
93.99
Note: Lighted Phantom Covers are not D.O.T. approved nor are they intended to replace stock turn signals or taillights.
146
swing arm pivot bolt cover for XL
8 7 7 - 3 7 0 - 3 6 0 4
Fits: ‘91-’03 Sportster Models
8220
8101
Swing Arm Bolt Cover (ea)
10.99
$
Latus Motors Harley-Davidson 1542
7851
8256
7858
8677
8253 See pgs 144-145 for items not found on these pages.
for Softail
Easy & neat, this cover installs right below our Boomerang Frame Cover on the left side of your bike. Fits: ’97-’07 Softail Models without cross-over exhaust
8253
Lower Frame Cover for Softail (ea)
$
39.99
CHROME
lower frame cover
¸
boomerang frame covers
This is one of our most popular Softail accessories. This high quality die-cast cover features a ball-milled detail & a lush chrome finish. It is important to remember that the reason we offer so many versions of Boomerangs is not due to differences in the frame itself, but due to components bolted to the frame that affect installation of our covers. Exhaust support brackets will directly affect which covers to order. Please read the applications & notes carefully before ordering. Boomerang frame covers are not compatible with H-D passenger footboards.
for ’00-’07 Softail Models
swingarm pivot covers Quickly & easily cover the ends of the swingarm pivot shaft on your Twin Cam Softail with these chromeplated covers. Fits: All ’00-’07 Softail Models (except ‘05-’07 FLSTN, ‘07 FLSTF, & ‘07 FXSTD)
7849
Swingarm Pivot Covers (pr)
$
7851
Fits: All ‘00-’07 FXST (except Deuce) & all ‘00-’07 FLST (except Fat Boy & Deluxe) (pr)
$
8233
Fits: ‘00-’06 Fat Boy with Shotgun Exhaust using O.E. rear support bracket (pr)
$
8235
Fits: ‘00-’07 Deuce with exhaust system not using O.E. rear support bracket (pr)
$
103.99 103.99 103.99
Note: If you have a ‘00-’07 Fat Boy or ‘05-’07 Deluxe & have removed the O.E. rear exhaust support bracket, you should use P/N 7851.
for ’86-’99 Softail Models 8188
Fits: All FXST Models & all FLST Models without Shotgun Exhaust (pr)
103.99
$
20.99
W W W . K U R Y A K Y N . C O M
147
Latus Motors Harley-Davidson swingarm covers for Dyna Patent Pending
Here’s the smart way to get the killer good looks of a fully chromed swingarm. Take a few minutes & apply this cool Swingarm Cover for Dyna Glides. It’s two-piece design permits simple, quick installation & it covers all visible parts of the swingarm – even the axles! You won’t miss any riding time & you can do it for a fraction of the cost of plating the stock swingarm! Fits: All ‘06-’09 Dyna Models
7819
taillight cover Sturdy & attractive. These superbly stylized covers do wonders for your dull taillight. 3-year limited warranty included, as these will never rust.
Taillight Cover (ea)
$
9008
Taillight Visor without Slots (ea)
$
U.S. Patent D347,907 Patent Pending
199.99
$
taillight cover
9008
Thick & creamy. Our die-cast aluminum cover follows the bobbed fender line perfectly & installs in about two minutes.
Fits: ’73-’09 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’09 FLSTN, ’00-’07 FXSTD, ’02-’09 V-Rod, ’08-’09 Rocker, ’09 FXDB)
8130
Swingarm Covers for Dyna (pr)
Fits: All ’73-’09 Big Twins with bobbed rear fender
8131
29.99
Taillight Cover for Bobbed Rear Fenders (ea)
19.99
$
28.99
Note: P/N 9008 is intended for motorcycles with the license plate below the taillight to cover the clear window on top of the lens. 8130
Inexp ensiv e Up g ra d e!
9008
zombietm taillight cover
As your taillight fades into the darkness, the sinister impression of the Zombie is all that will remain. A new addition to our popular collection, this taillight cover reinforces the image of your evil ride. All hardware is included for easy installation. Fits: ’73-’09 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’09 FLSTN, ’00-’07 FXSTD, ’02-’09 V-Rod, ’08-’09 Rocker, ’09 FXDB)
9009
Renderings Shown
Zombie Taillight Cover (ea)
$
29.99
widow® taillight cover More evil per mile! The Widow Taillight Cover features a chrome 3-D Widow figure creeping across the taillight lens. In daylight it sparkles in the sun, in darkness an ominous silhouette is cast. Get caught up in the Widow’s web & add this venomous taillight cover to your collection of Widow themed accessories!
9020 Rendering Shown
Fits: ’73-’09 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’09 FLSTN, ’00-’07 FXSTD, ’02-’09 V-Rod, ’08-’09 Rocker, ’09 FXDB)
9009
148
C U S T O M E R
C A R E
9020 C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Widow Taillight Cover (ea)
$
39.99
Latus Motors Harley-Davidson
license Plates
Th is Simp le Up grad e Will f Bring Loads o Comp lim ents!
curved license plate frame
The Street Glide is way cool, but this bolt on, gracefully curved license plate frame makes a big difference. Rid yourself of the stock black bracket & the flat look. No drilling – no need for a new license plate light. Just bolt it on & go! Fits: ’06-’09 Street Glides, ’09 Road Glides, Road Kings & Electra Glide Standards, ’07-’08 FLHRSE, & ’05 FLHTCSE
3163
Curved License Plate Frame (ea)
$
72.99
CHROME
¸
deluxe bullet light rear turn signal bar kit Küryakyn makes it easy to give the rear fender on Road Kings, Road Glides, & FLHT Standards a clean, uncluttered look like the FLHX without breaking the bank. The kit includes our Bullet Light Rear Turn Signal Bar (P/N 2098), Curved License Plate Frame (P/N 3162), & Rear Bar Accent (P/N 1320) to cover the mounting holes left uncovered by removal of the stock license plate. Buy this kit & save! No need to buy these parts separately!
Clean Up Yo ur R ear-End!
Fits: ’97-’08 Road King Models (except ‘07-’08 FLHRSE), ’98-’08 Road Glides, ’97-’08 FLHT Standard
3000
Deluxe Bullet Light Rear Turn Signal Bar Kit (kit)
$
239.99
It’s a Comp le t e Kit!
W W W . K U R Y A K Y N . C O M
149
Latus Motors Harley-Davidson
When routing wires for lighted license plates, make sure they are not in a location where they can get pinched, frayed or cut.
lay down license plate holder
curved laydown license plate mount for Road King
for Road Kings & Road Glides Here’s an easy way to give your Road King or Road Glide a sleeker look. This license plate bracket lays down to complement the lines of the fender rather than standing up like a billboard. Mounts in the same location as the stock piece. Easy to install.
As long as you have to display a license plate on your bike, why not make it look like it belongs there? Curved to your fender’s contour & laid down for a sleek low profile, this chromed, ball milled mount will blend in, not stick out. Designed to fit 4”x7” plates.
Fits: ‘97-’08 Road Kings (except ‘07-‘08 FLHRSE), ‘98-’08 Road Glides & ‘97-’08 FLHT Standard
Fits: ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides & ’97-’08 FLHT Standard
3165
Curved Laydown License Plate Mount (ea)
$
113
83.99
curved fender tip license plate mount You asked for it – we designed it! This very classy curved license plate mount hugs the contour of the fender & replaces the existing fender tip. Incorporates a stylized tip, red L.E.D. lights & a light to illuminate the plate itself while cleaning up the clutter on the rear fender. A simplified wiring solution readily plugs in on ’96-’08 Touring Models & ‘96-’09 Softails. Hardwiring is required on earlier Models.
Replaces Stock Fender Tip Light on ’80-’08 Electra Glides, Tour Glides & Road Kings, & ’86-’09 FLST Models
3164
150
C U S T O M E R
C A R E
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
Curved Fender Tip License Plate Mount (ea)
176.99
$
Lay Down License Plate Holder (ea)
$
41.99
Latus Motors Harley-Davidson
curved laydown License Plate Mount with Frame
9171
This super cool, curved laydown license plate bracket is a major improvement over the stock billboard plate mount on many H-D’s. The curved frame meets the backing plate cleanly for a finished & completely custom look. Accents 4”x 7” plates. Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
9171
Curved Laydown License Plate Mount with Frame (ea)
$
72.99
license holder Designed to replace Harley’s standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down. Laydown License Plate Holder (ea)
$
CHROME
9165
¸
41.99
license frame & back plate set
ballmilled license plate frames The one thing most custom license plate frames have in common is they’re too small to fit about half of the state’s license plates! This frame is offered in two sizes to fit 4-3/8” x 8” & 4” x 7” plates. Depending on which plate you’re working with, some minor modifications may still be necessary, but this will make many installations much easier. This great looking frame is finished in glistening chrome, & has ball-milled accents.
9164
Large License Plate Frame (ea)
$
29.99
9163
Small License Plate Frame (ea)
$
29.99
lighted license plate frame
Our chrome frame & back plate will dress up your license plate when using the stock bracket. Fits: 4” x 7” Plates
9166
License Frame & Back Plate Set
$
20.99
This chrome die-cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake & tail lamp circuits or together for an extra bright stop or running light. Fits: 4” x 7” Plates
9167
Lighted License Plate Frame (ea)
$
45.99
Note: Not intended to replace O.E. brake or taillight.
W W W . K U R Y A K Y N . C O M
151
Latus Motors Harley-Davidson 3159
l.e.d. lighted curved license plate frame
Here’s a great universal Curved License Plate Frame for custom or stock fenders. It includes a chrome backing plate & outer frame with built-in L.E.D.’s to illuminate the license plate. It’s a great way to relocate a license plate below the taillight!
5450
Fits: Universal applications with 4” x 7” license plates – Installation requires drilling mounting holes L.E.D. Lighted Curved License Plate Frame (ea)
9182
103.99
$
with küryakyn, it’s easy to relocate your license plate below your taillight!
9182
Step 1:
Choose your Mount: Select P/N 9182 for universal applications, P/N 2098 for bikes with rear turn signal bars, or P/N 3164 for bikes with fender tip lights
Step 2: Choose a taillight lens without a clear license plate
window (P/N 5450 or 5451)
Step 3: Choose a cover to take the place of the original license
L o ok s
Gr eat
plate mount (P/N 3158, 3159, or 1320)
W ith ...
laydown taillight lenses
s B uilt-In L.E.D.’ Yo ur t o Illumina t e Lic ense P la t e!
Combine with our Smoke Laydown Taillight Lens or Laydown Replacement Lens for a look that’s totally custom! See Pg 29 P/N 5450 or 5451
D isp lay Yo ur Am erican P rid e!
swept eagle License Plate Frame This contemporary eagle license plate frame can be the final touch you need. The frame is chrome-plated ABS & backing plate is chrome-plated steel. The backing plate is drilled for universal mounting or it can be mounted in place of the stock license plate bracket on ‘97-’08 Road Kings (except ‘07-’08 FLHRSE), ‘98-’08 Road Glides, or ‘97-’08 FLHT Standards. Fits: 4”x 7” Plates
lone eagle
3161
License Plate Frame Show your American pride with this beauty! This universal plate frame features a chrome-plated ABS outer frame & chrome-plated steel backing plate. The backing plate is drilled for universal mounting or it can be mounted in place of the stock license plate bracket on ‘97-’08 Road Kings (except ‘07-’08 FLHRSE), ‘98-’08 Road Glides, or ‘97-’08 FLHT Standards. Fits: 4”x 7” Plates
3160
152
Lone Eagle License Plate Frame (ea)
C U S T O M E R
C A R E
C E N T E R
$
62.99
8 7 7 - 3 7 0 - 3 6 0 4
Swept Eagle License Plate Frame (ea)
$
62.99
Latus Motors Harley-Davidson
curved side mount license holders
In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Sized to fit 4” x 7” plates only, this trick product is available with or without an auxiliary run-brake taillight.
Curved Side Mount with Taillight: Unique design allows you to position taillight on top or bottom.
3179
Fits: All ’86-’09 Softail Models (except Rocker/C) (ea)
$
3172
Fits: ’90-’05 Dyna & ’86-’09 Sportster Models (ea)
$
187.99 187.99
Note: Softail applications are compatible with or without our Swingarm Covers (pgs 145-146).
Curved Side Mount without Taillight: 3180
Fits: All ’86-’09 Softail Models (except Rocker/C) (ea)
$
3173
Fits: ’90-’05 Dyna & ’86-’09 Sportster Models (ea)
$
be Taillig h t Can Top Installe d on o r B o t t o m!
135.99 135.99
Note: Softail applications are compatible with or without our Swingarm Covers (pgs 145-146). Note: Please check local laws regarding side mount license plates before ordering.
Lit/UnLit
3180
Works on All So ftails!
3179
curved license plate frame with Run-Turn-Brake This “frame-up” leaves no chance for mistaken identity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/ brake, or run/turn modes. White L.E.D.’s provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4” x 7” plates.
CHROME
¸
Fits: Any H-D Model with the standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
3166
vertical side mount license holder with Light
Lighted Curved Laydown License Plate with Accent Taillights (ea)
124.99
$
This side-mount license holder with light creates a show bike look & adds visibility with a red L.E.D. run & brake light complete with license plate illumination. It’s smooth design shows no visible fasteners around the plate. Removable inserts allow it to accommodate both small (4” x 7”) & large (4-3/8” x 8”) plates.
3178
Fits: All ‘86-’09 Softail Models (except Rocker/C) (ea)
$
9152
Fits: ‘90-’05 Dyna & ’86-’09 XL Models (ea)
$
145.99 145.99
Note: Softail applications are compatible with or without our Swingarm Covers (pgs 145-146). Note: Please check local laws regarding side mount license plates before ordering. W W W . K U R Y A K Y N . C O M
153
Latus Motors Harley-Davidson l.e.d. license plate bolt lights
Light up your license plate whether it’s in the stock location or custom mounted with these white L.E.D. bolt lights. You won’t find a cleaner license plate lighting option with a simpler installation.
9199
L.E.D. License Plate Bolt Lights (pr)
$
20.99
l.e.d. license plate illuminators with Turn Signal Accents
Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 5/16” mounting stud makes it simple to bolt them on, wire them in, & ride on!
9399
L.E.D. License Plate Bolt Lights with Red Accent Light (pr)
$
Lights Not Included
31.99
license plate marker light/ turn signal mount
license plate mounting hole covers
Mount auxiliary marker lights or turn signals to your license plate. This simple system mounts directly to the back of your license plate with support backing plate & two side mount brackets. The side mount brackets have a 3/8” hole & will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets (See pgs 23-26).
3158
4247
With so many riders using our Side Mount License Plate Mounts or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. Both covers install in minutes & completely cover the footprint left by the stock mount.
e A Must-Ha v ing Wh e n R unn t a Sid e Mo un t e! Lic ense P la 154
C U S T O M E R
C A R E
Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (both styles also cover the fourth hole found on some Dyna & Sportster Models)
3158
License Plate Mounting Hole Cover with Emblems (ea)
$
3159
Tribal License Plate Mounting Hole Cover (ea)
$
C E N T E R
8 7 7 - 3 7 0 - 3 6 0 4
31.99
20.99
License Plate Marker Light Mount (ea)
$
39.99
inspection plate This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don’t have to mess up a nice paint job or chrome surface with some cheesy government sticker. Universal fitment.
9168
Inspection Plate 3-1/2” x 3-1/2” (ea)
$
41.99
9162
Texas Inspection Plate 2-7/8” x 4” (ea)
$
41.99