Steelcase Book by Linze Boesen

Design for well-being

Table of Contents

Design Inspiration...........................................................................................2 Project Introduction.......................................................................................3 Floor Finishes/Lighting Concept...................................................................4 Cone Study/Light Levels...............................................................................5 Space Plan.....................................................................................................6 Steelcase Products........................................................................................7 Reflected Ceiling Plan..................................................................................8 Lighting...........................................................................................................9 Sections........................................................................................................10 Elevations................................................................................................11-12 Perspectives............................................................................................13-15 Study Model Photos....................................................................................16 Light Fixture Cut Sheets..........................................................................17-30 Light Fixture Schedule..................................................................................31

Design Inspiration Public vs. Private Gallery

Comfort

Multi- Use Spaces

Project Introduction Site

-Incorporate Residential, Retail and Cafe spaces on one floor of existing Steelcase showroom. Showroom is located on the fourth floor of a building located on PCH and 2nd Street.

Concept

-The entire floor has a â&#x20AC;&#x2DC;galleyâ&#x20AC;&#x2122; feeling to it. By leaving main hallway spaces open it gives a chance to step back and see the architectural elements encroaching intothe space. It also gives the lighting design room to shine. The lighting is used throughout the space by bouncing off one surface and spilling over onto the other. This provides ample lighting throughout the space without being too direct.

Client

-The client is a 26 year old single male. He is a working professional who he also loves to entertain in his spare time. He is a brain cancer survivor who donates to the Kelly Heinz Brain Tumor Foundation.

Non-Profit Organization

-The Kelly Heinz Brain Tumor Foundation focuses on the emotional, psychological and spiritual damage that affects cancer patients and their loved ones. The foundation works to provide support, and stability while going through and after cancer experience. They also focus on prevention, and awareness of brain cancer.

Retail

- Bad Hair Day is a privately owned wig salon. Half of their proceeds are donated to the Kelly Heinz Brain Tumor Foundation. They focus on making wig shopping as comfortable as possible.

Cafe

-A Bump In The Road is a cafe which caters to cancer patients and their unique nutritional needs. Patients enduring chemotherapy and radiation are asked to stay away from certain foods, while eating higher levels of others. Proper nutrition during this process is critical to the patients recovery.

Floor Finishes & Lighting Concept Bamboo Planks

4 Oak Planks

2 Sealed Concrete

e4/e5

e3 sB

1 2 3 4 5 6

Kitchen Dining/Outdoor Living/Bedroom Cafe Retail Floor Fitting Areas

The lighting throughout the space is designed to be â&#x20AC;&#x2DC;invisibleâ&#x20AC;&#x2122;. Byy using use low voltage lamps in higher quantities , the lightin creates a calm feeling throughout the space. Direct lighting is used in the vanity areas and inbetween the canopies. LED strips line the top edge of the low canopy so that just the glow from the fixture is seen and not the fixture itself. Recessed Lights are used in the retail and residential spaces. Drop down canned lights are used in the cafe area since there is no finished ceiling. Accent Lights area provided by using LED strip lighting and sconces throughout the entire space.

Cone Study & Light Levels High (Task) Medium (General) Low (Ambient)

3 4 2 1

5 6

1. The kitchen area is designed to be very light and clean. The island is stainless steel, the counter is poured concrete, the backsplash is glass and cabinets have a resin finish. All the different textures combine to give a variation in the way the light bounces off surfaces. A LED strip highlights the glass backsplash.

2. The dining area is set in the extremeties of the building. This is done to take advantage of the amazing view of PCH. There is a pendant fixture over the center of the dining table. Recessed lights are used in the area as natural light will flood the space duing the day. This eliminates the need for much lighting during the day time.

3. The living space doubles as a bedroom area. The sofa, end tables and coffee stools are all centered perfectly on the only freestanding wall in the space. The bed is stored flush in the ceiling directly above the sofa and can be dropped down with the push of a button. There are recessed lights in the bottom of the bed to provide light when the bed is not in use.

4. The cafe is the first space people will see upon entering the space. Thus the canopy over the counter space is dramatic. The top of the canopy is lit with LED strip lights. The actual fixture is hidden so that only the light can be seen from below. The bottom of the canopy has small recessed lights to provide task lighting to the counter below.

5. The retail space is designed to be very simple. General lighting lights the space while spotlights and LED strips create highlights. There are two counters displaying the wigs. There are drawers below the wigs where all of the wigs are stored. The lighting at the vanity stations is designed to be more direct. Track lighting highlights the products and provides task lighting when searching drawers.

6. The second half of the retail space is used as a more private fitting area for the customers. There are six different stations, each contains two stools, and a vanity station. The walls are designed in a â&#x20AC;&#x2DC;Câ&#x20AC;&#x2122; shape to provide more privacy while selecting the pieces. Each vanity has a canopy. The canopy contains two recessed lights to provide general lighting in the covered more private spaces.

Space Plan

The lighting throughout the space is designed to be invisible. I chose to use low voltage lamps in a higher quantity of fixtures in order to create a calm feeling throughout the space. The only direct lighting is used in the vanity areas and inbetween the canopies. LED strips line the top edge of the low canopy so that just the glow from the fixture is seen and not the fixture itself. Recessed Lights are used in the retail and residential spaces. Drop down canned lights are used in the cafe area since there is no finished ceiling. Accent Lights area provided by using LED strip lighting and sconces throughout the entire space.

Steelcase Products DesignTex Shades-Lime Green

Design Tex shades are used in the residential area. Shades will be custom cut to fit the double doors that lead to the outdoor deck. Shades will be pull down style.

Mansfield Chairs

Mansfield chairs will be used in the dining area. Alternating fabric will be used to give variety.

Post & Beam w/ fabric

Post and beam will be used to section off the closet area from the office area. Heavy fabric will be used to fill the wall space.

Convene Table

The Convene table is used in the dining room. It makes for a great space both to eat and as a place to be able to spread out and get work done.

Privacy Wall- Frosted Glass

Privacy glass will be used in the front areas. This will provide privacy but also allow for natural light to filter into the space.

Reflected Ceiling Plan Retail Counter Light

Spotlight

Pendant Light

Track Light

Recessed LED Light

Lamp

Pendant Light

Exit Sign

Reading Lamp

Recessed Light Downlight Linear LED Strip

Vanity Light

LED Wallwasher

Wall Sconce

Water Resistant Recessed Light

14’

@ 1’’ A.F.F

17’7’’ @ 10’ A.F.F

14’ @ 10’ A.F.F

14’

Ceiling materials will cosist of finished drywall in all areas where a 14’ ceiling occurs. The cafe space will have an open ceiling in which all exposed ceiling elements will be painted black. Any light fixtures in this area will drop down to a 14’ height. The canopy elements will be custom made of wood and finished with a resin material. The canopies will match that of the material used in the wall elements which visually connect the canopy to the floor.

Lighting

3URGXFW 6SHFLILFDWLRQV IRU (

-RE 1DPH

-RE 7\SH

4XDQWLW\

&RPPHQWV

( ,QILQLW\ /LJKW )ORRU /DPS

6SHFLDO HIIHFWV RQ KLJK 7KLV GLVWLQFWLYH GHVLJQ FUHDWHV DQ LQILQLW\ HIIHFW E\ XVLQJ WKH ODZV RI SK\VLFV DQG WKH UHIOHFWLYH SURSHUWLHV RI WZR RSSRVLQJ VPRNHG RQH ZD\ PLUURUV ,PDJHV RI WKH OLJKW DQG FRORUHG FU\VWDOV PRXQWHG LQ FKURPH IUDPHV DUH VHQW IURP ]HUR WR LQILQLW\ DQG EDFN DJDLQ 7UXO\ D QHZ DJH FRQYHUVDWLRQ SLHFH WKDW EULGJHV LQWR WKH QH[W GLPHQVLRQ

)LQLVK 3ROLVKHG &KURPH

CAFE PENDANT

*ODVV 6KDGH 6PRNHG 0LUURU

FLOOR LAMP

/DPSLQJ 1XPEHU RI %XOE V

/LJKW 7\SH %XOE 7\SH 0D[ %XOE :DWWDJH 0D[ )L[WXUH :DWWDJH 5DWHG /LIH 5DWHG /XPHQV &RORU 7HPS %XOE V ,QFOXGHG /LJKW 8S 'RZQ %HDP 6SUHDG &5, 3KRWR &HOO ,QFOXGHG %DOODVW

;HQRQ * 7 Â&#x201C; +RXUV Â&#x201C; Â&#x201C; . <HV 1 $ 1 $ 1 $ 1 $ 1 $

&HUWLILFDWLRQ 8/ (7/ &6$ (QHUJ\ 6WDU &$ 7LWOH &$ 7LWOH $'$

'U\ 1R 1R 1R 1R

0HDVXUHPHQWV :LGWK +HLJKW /HQJWK ([WHQVLRQ %DFN 3ODWH :LGWK %DFN 3ODWH +HLJKW +&2 0LQ 2YHUDOO +HLJKW 0D[ 2YHUDOO +HLJKW +DQJLQJ :HLJKW +HLJKW $GMXVWDEOH 6ORSH 2WKHU 83& &RGH 0DWHULDO

1 $ 1 $ 1 $ 1 $ 1 $ 1 $ OE V

1 $ 1 $

3URGXFW &DWHJRU\ )ORRU /DPS 6KLSSLQJ &DUWRQ :HLJKW &DUWRQ :LGWK &DUWRQ +HLJKW &DUWRQ /HQJWK &DUWRQ &XELF )HHW 0DVWHU 3DFN 0DVWHU 3DFN :HLJKW 0DVWHU 3DFN :LGWK 0DVWHU 3DFN +HLJKW 0DVWHU 3DFN /HQJWK 0DVWHU &XELF )HHW 836 6KLSSDEOH

(TXLYDOHQWV ,QFDQGHVFHQW :DWWV 1 $ )OXRUHVFHQW :DWWV

OE V

1 $ 1 $ 1 $ 1 $ 1 $ 1 $ <HV

1 $ 1 $

(7 &RQWHPSRUDU\ /LJKWLQJ DQG DOO GHVLJQV ORJRV DQG LPDJHV Â&#x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

1RUWK 9LQHODQG $YHQXH _ &LW\ RI ,QGXVWU\ &DOLIRUQLD _ S I _ ZZZ HW RQOLQH FRP

LED LIGHTSTRIP

KITCHEN ISLAND PENDANT

RETAIL PENDANT

WALL SCONCE

DINING ROOM PENDANT

Sections EXIT OPEN TO ATRIUM

This section shows in more detail the retail floor. It shows an angle inside the vanity fitting areas. The residential view shows a profile of the sink and upper cabinets. It also shows the desk and storage area that is also located in the kitchen

EXIT

Food

for thought

Hair

forthe BARE

This section shows the check out counters in both the retail and cafe spaces. It shows how the canopies are incorporated into the architecture of the space by applying the same material down the wall. The retail space shows a detail of the entertainment unit and the casual seating area.

Elevations EXIT

This elevation shows how the residential door is incorporated into the design of the overall space. It also shows the profile of the first wall that can be seen in the space upon entry.

This elevation shows the main wall in the cafe space. The canopy is integrated into the space by carrying the same material down the wall. Two sets of tables and chairs are provided for customers.

This elevation shows in detail the use of the retail floor. The back wall is lined with doll heads for display. While the center area is used for picking out and trying on the actual wigs. The back wall is upholstered in lime green patterned fabric.

Elevations

The living area is located in the north side of the only solid wall in the space. There is a water feature just above the sofa. The sofa is flanked by two nightstands and two sconces.

The living area also doubles as a bedroom. The bed is located flush in the ceiling and drops down with the push of a button. The ottomans can be pushed to the foot of the bed and used as a bench.

Pull down style Design Tex shades are used in the residential area. Lighting in this area is designed to be used at night since the space allows for adequate amounts of daylight .

Perspective

This perspective shows how the lighting can enhance the space. There is LED strip lighting that highlights the glass backsplash. Pendants that provide task lighting for the island counter area. The general lighting comes from recessed lights in the ceiling.

Perspective

Food

for thought

This perspective shows a detail of the canopy. LED strip lights line the edges of the lower canopy so that the only the light can be seen. Recessed lights are places on the underside of the lower canpy to provide light to the space below.

Perspective

This perspective shows the entry to the retail space. There is a shallow window in the front of the retail space which provides a space for a window display. Spotlights within this space draw attention. Large canned lights drop down from the finished ceiling into the common area.

Corner of Retail Space

Study Model

Retail Entrance Cafe Area Floor Plan With Lowered Ceilings Floor Plan

Cut Sheet Upload Your Logo Remove Your Logo Price & Print Options Printer Friendly View Email Cut Sheet Save Cut Sheet Edits & Options Close Window Cut Sheet - KR-10054-BS Cosmic Contemporary Kitchen Island / Billiard Light Description: The future is now! Captured in the gleem of this modernistic family is a multi-directional head with a lens-like appearance. [ Edit ] http://www.arcadianlighting.com/kr-10054-bs.html Brand: Kenroy Height: 3.00" Width: 38.00" Shade: Frosted White Scavo Glass Finish: Brushed Steel Lamping: (4) 40W T4 incandescent (bulb included) Usually Leaves Warehouse In: 2 - 5 business days Price: $268.20 Company: Room: Project:

Fixture Type: Placement: Approved By:

Prepared By [ Change Your Info ] [ Clear ]

Date: 5/9/2010

Prepared For [ Change Client's Info ] [ Clear ]

Cut Sheet 3URGXFW 6SHFLILFDWLRQV IRU (

-RE 1DPH

-RE 7\SH

4XDQWLW\

&RPPHQWV

( 1HR /LJKW 3HQGDQW

$V FRRO JORVV\ LFH UHIOHFWV WKH GDUNV DQG OLJKWV ILOWHULQJ WKURXJK D KLJKEDOO RI ILQH OLTXHXU 1HR V FOHDU DQG OHDG IUHH FU\VWDO FXEHV WDNH RQ WKH KXHV DQG WRQHV RI WKH URRP WKH\ LQKDELW :HLJKW\ DQG GHQVH HDFK FU\VWDO HQYHORSV LWV RZQ EXOE LOOXPLQDWLQJ LW IURP ZLWKLQ DQG VXVSHQGV IURP VOHHN DGMXVWDEOH FDEOHV IRU HQGOHVV RSWLRQV

)LQLVK 3ROLVKHG &KURPH

/DPSLQJ 1XPEHU RI %XOE V

/LJKW 7\SH %XOE 7\SH 0D[ %XOE :DWWDJH 0D[ )L[WXUH :DWWDJH 5DWHG /LIH 5DWHG /XPHQV &RORU 7HPS %XOE V ,QFOXGHG /LJKW 8S 'RZQ %HDP 6SUHDG &5, 3KRWR &HOO ,QFOXGHG %DOODVW

&HUWLILFDWLRQ 8/ (7/ &6$ (QHUJ\ 6WDU &$ 7LWOH &$ 7LWOH $'$

;HQRQ * 7 Â&#x201C; +RXUV Â&#x201C; Â&#x201C; . <HV 1 $ 1 $ 1 $ 1 $ 1 $

'U\ 1R 1R 1R 1R

*ODVV 6KDGH &U\VWDO 0HDVXUHPHQWV :LGWK +HLJKW /HQJWK ([WHQVLRQ %DFN 3ODWH :LGWK %DFN 3ODWH +HLJKW +&2 0LQ 2YHUDOO +HLJKW 0D[ 2YHUDOO +HLJKW +DQJLQJ :HLJKW +HLJKW $GMXVWDEOH 6ORSH 2WKHU 83& &RGH 0DWHULDO

1 $ 1 $ 1 $ 1 $ 1 $ OE V

<HV 1 $

3URGXFW &DWHJRU\ ,VODQG 3HQGDQW 6KLSSLQJ &DUWRQ :HLJKW &DUWRQ :LGWK &DUWRQ +HLJKW &DUWRQ /HQJWK &DUWRQ &XELF )HHW 0DVWHU 3DFN 0DVWHU 3DFN :HLJKW 0DVWHU 3DFN :LGWK 0DVWHU 3DFN +HLJKW 0DVWHU 3DFN /HQJWK 0DVWHU &XELF )HHW 836 6KLSSDEOH

(TXLYDOHQWV ,QFDQGHVFHQW :DWWV 1 $ )OXRUHVFHQW :DWWV

OE V

1 $ 1 $ 1 $ <HV

1 $ 1 $

1RUWK 9LQHODQG $YHQXH _ &LW\ RI ,QGXVWU\ &DOLIRUQLD _ S I _ ZZZ HW RQOLQH FRP

Cut Sheet PUKLED®

LPK-ALED

LPK-ALED WITH HIDDEN FASTENERS

DESCRIPTION A General Small scale LED ﬁtting with hidden fasteners; suitable for dry or wet, interior or exterior applications

.62” 16mm

B Special Features Machined aluminum body; dimmable 3W AC LED (dimming by power supply); LED module is replaceable

1.70” 43mm .26" 7mm 2.75" 70mm

C Effects Devices Standard with 20° spot proprietary lens (NSL-5) and soft focus lens (SFL-5); note on specification if either is not required; may accept one effects device in place of soft focus lens; consult factory for availability of colored gels and flood and wide flood configurations D Mounting Semi-recessed mount; thickness over mounting plane is .26” (7mm); for wet location and well-light applications see page 2

D C Aperture 1.23“ [31mm]

E Retention Mounting screws included and concealed by machined screw-on cover; ﬁtting requires minimum panel depth of .75” (19mm) to fully conceal ﬁtting and provide adequate remaining material in panel after boring

TECHNICAL CONSTRUCTION

LED

Fitting: Machined aluminum

The standard 3W AC LED is available in color temperatures of 3200 °K (15.2 lm/watt) and 4700 °K. Average rated lamp life of 50,000+ hours.

Mounting: Back box is thermoplastic polymer (see page 2) ELECTRICAL

LISTING

Fixture is pre-wired with 18 AWG 10’ (3m) lead. The system requires a proprietary remote driver assembly (PSA-60-12H dimmable power supply with hardwire transformer or PSA-60-12P plug-in transformer (must meet transformer’s minimum wattage requirement), each order separately). Maximum recommended run length is 30 feet with 18 AWG wire (consult factory for custom lengths). Each power supply is capable of powering up to 18 luminaires. See page 3 for PukLED AC power supplies.

ETL listed for dry, damp, wet and marine locations; CE marked; IP65 rated WARRANTY Manufacturer’s one year warranty guarantees product(s) listed to be free from defects in material workmanship under normal use and service. Warranty is conditional upon use of manufacturer supplied transformer or ballast.

ORDERING INFORMATION (ﬁtting) Example: LPK-ALED-3K-A

SERIES

COLOR TEMP

FINISH

ACCESSORIES

LPK-ALED LPK-ALED-WET

3K 5K

A W B

WTL-5 CGL-5 SGL-5 FGL-5 LSL-5 HCL-5

Standard PukLED PukLED with sealed lens for wet location (see page 2) LPK-ALED-WELL PukLED with sealed polycarbonate lens for well-light application (see page 2)

3200 °K 4700 °K

Clear Anodized Aluminum White Powdercoat Black Anodized Aluminum

Warm Tone Lens Clear Glass Lens Spread Glass Lens Frosted Glass Lens Linear Spread Lens Honeycomb Louver page 1

luciferlighting.com

[ 021910]

3750 IH35 North San Antonio, Texas 78219 [ PH] +1-210-227-7329 [FAX] +1-210-227-4967

Cut Sheet DL72Z

DL72Z

RECESSED DOWNLIGHT GYRO™ DUAL-AXIS ADJUSTABLE

Online Quick Product Page Reference: DLCAT72Z

DESCRIPTION A Aiming Two lockable axes of adjustment; adjustable from below with allen wrench B Special Features Exposed, circular, machined aluminum planes interlock in two axes; manually conﬁgurable with snoot to roomside for glare control, or reversed allowing for lamp placement below ceiling plane

SNOOTED 2.25" 57mm

C .75" 19mm

C Effects Devices Frosted glass lens included; internal coil-spring allows secure placement of multiple effects devices (see chart below for total per light source)

1.35" 34mm 3.95" 100mm

NONSNOOTED

D Trim Plate Thickness measures 0.055”; install as zero-sightline or ﬂange overlay E Retention Torsion spring clips accomodate varying ceiling thicknesses and ensure snug ﬁt of trim against ceiling

1.47" 37mm

TECHNICAL CONSTRUCTION Trim: Steel and aluminum; painted ﬁnishes are granulated powdercoat

HOUSING See housing speciﬁcations (page 2) LISTING ETL listed for dry/damp locations

LAMP MR-16 style lamp options: 12V halogen (HAL) max wattage is housing dependent, ceramic metal halide (HID) 39W max, light emitting diode (LED) To ensure optimal results, it is recommended to specify lamps supplied by Lucifer Lighting* (see page 2)

WARRANTY Manufacturer’s one year warranty guarantees product(s) listed to be free from defects in material workmanship under normal use and service. Warranty is conditional upon use of manufacturer supplied transformer or ballast.

ORDERING INFORMATION (downlight) Example: 12-5-LED-MF

Example: DL72Z-A-LED DL72Z

SERIES

FINISH

LIGHT SOURCE

DL72Z

A Aluminum

HAL Halogen HID High Intensity Discharge LED Light Emitting Diode

EFFECTS DEVICES

FGL-2 Frosted Glass Lens (standard) CGL-2 Clear Glass Lens UVL-2 Ultra Violet Lens SGL-2 Spread Lens LSL-2 Linear Spread Lens SFL-2 Soft Focus Lens HCL-2 Honeycomb Louver WTL-2 Warm Tone Lens AGL-2 Amber Glass Lens

LAMP *Optional (see page 2)

Light HAL Source Total Effects 2 Devices

HID*

LED

*Fixture accepts bare HID lamp only page 1

luciferlighting.com

[ 073109]

3750 IH35 North San Antonio, Texas 78219 [ PH ] +1-210-227-7329 [FAX] +1-210-227-4967

Cut Sheet DL11XM

DL11XM

RECESSED DOWNLIGHT ROUND FIXED

Online Quick Product Page Reference: DLCAT11XM

DESCRIPTION A Aiming Fixed vertical lampholder B Special Features Die-cast aperture lens holder; shallow lamp recess; may be re-lamped from room side without trim removal from housing C Effects Devices Frosted glass lens included; spring-clip lampholder allows secure placement of multiple effects devices (see chart below for total per light source)

C 2.30" 58mm

D Trim Plate Thickness measures 0.055”; install as ﬂange overlay

1.75" 44mm

4.92" 125mm

E Retention Torsion spring clips accomodate varying ceiling thicknesses and ensure snug ﬁt of trim against ceiling

TECHNICAL CONSTRUCTION Trim: Steel and aluminum; painted ﬁnishes are granulated powdercoat

HOUSING See housing speciﬁcations (page 2) LISTING ETL listed for dry/damp locations

LAMP MR-16 style lamp options: 12V halogen (HAL) max wattage is housing dependent, ceramic metal halide (HID) 39W max, cold cathode compact ﬂuorescent (CCFL), light emitting diode (LED) To ensure optimal results, it is recommended to specify lamps supplied by Lucifer Lighting* (see page 2)

ORDERING INFORMATION (downlight) Example: DL11XM-W-LED

Example: 12-5-LED-MF

DL11XM

SERIES

FINISH

LIGHT SOURCE

DL11XM

W Matte White B Matte Black C Polished Chrome

HAL HID LED CCFL

Halogen High Intensity Discharge Light Emitting Diode Cold Cathode Compact Fluorescent

EFFECTS DEVICES

FGL-1 Frosted Glass Lens (standard) CGL-1 Clear Glass Lens UVL-1 Ultra Violet Lens SGL-1 Spread Lens LSL-1 Linear Spread Lens SFL-1 Soft Focus Lens HCL-1 Honeycomb Louver WTL-1 Warm Tone Lens

LAMP *Optional (see page 2)

Light HAL Source Total Effects 2 Devices

HID

LED

CCFL

1 page 1

luciferlighting.com

[120909]

3750 IH35 North San Antonio, Texas 78219 [ PH] +1-210-227-7329 [FAX] +1-210-227-4967

Cut Sheet STRIA-LED™

STRIA-LED

LINEAR LED LIGHTING MODULE

DESCRIPTION A General Small profile, self-trimming linear lighting fixture for delineation of corridors, divider wall caps, and other applications; two nesting extrusions enclose LED light strip; fabricated in lengths up to 120” (3048mm) B Special Features Inner extrusion easily removed from outer extrusion for lamp change; LED modules may be mounted 2” (51mm) or 4” (102mm) on-center; features frosted lens cover C Effects devices Polycarbonate diffusion lens cover standard; frosted, non-ribbed lens cover may be specified in place of standard lens cover

.79” (20mm)

B Light strip

5/8” (20mm) Drywall

Inner extrusion

D 1.78” (45mm)

Lens cover

3.13” (80mm)

2.06” (52mm)

D Mounting Outer extrusion designed as a “self-trimming” offset lighting cove; readily accepts up to 5/8” (16mm) drywall/ plasterboard; ribbed “plaster lock” flange allows convenient taping and floating for seam free finish

C Outer extrusion

1.56” (40mm) Connector orientation

E Connection Specify left or right side electrical connector orientation

TECHNICAL CONSTRUCTION

LED

Housing: Inner and outer housings are extruded aluminum; light strip is supported by a steel carrier strip; lens cover is extruded polycarbonate

12V DC 1.5W LED festoon style modules available in 3500 °K or 4800 °K color temperatures. Average rated lamp life of 50,000+ hours. Standard lamp spacing is 2” (51mm) on-center.

Light Stip: Polyethersulfone thermoplastic with solid brass conductors

LISTING

LED Modules: Aluminum; white powdercoat

ETL listed for dry/damp locations; CE marked

ELECTRICAL

WARRANTY

Fixture is rated at 20 amps and comes complete with terminal block and ﬁtting support for hardwire connection to power supply. Fixture is compatible with 12V DC power supply (order separately) sized appropriately for the application. See page 2 for DC power supplies.

Manufacturer’s one year warranty guarantees product(s) listed to be free from defects in material workmanship under normal use and service. Warranty is conditional upon use of manufacturer supplied transformer or ballast.

ORDERING INFORMATION Example: STRLED-W-072-L-D-12-1.5-LW

STRLED SERIES

STRLED

STRIA LED

FINISH

LENGTH

CONNECTOR ORIENTATION

LENS COVER

A W B

in inches

L R

D F

Clear Anodized Aluminum Matte white powdercoat Matte black powdercoat

Left side Right side

Diffusion Frosted

LED MODULE

12-1.5-LW 3500°K Warm 12-1.5-LC 4800°K Cool page 1

luciferlighting.com

[072909]

3750 IH35 North San Antonio, Texas 78219 [PH] +1-210-227-7329 [FAX] +1-210-227-4967

Cut Sheet ATF-35

ATF-35

ADJUSTABLE SPOTLIGHT MACH 1

DESCRIPTION A Aiming 3 axes of adjustment; 360° self-locking pan; tilt up to 90° from vertical locks via thumbscrew; lampholder may be rotated and locked in any position via thumbscrew for precise lens/ accessory positioning

E A

3.6” 91mm

B Special Features Machined aluminum lampholder; open face; optional AMEC end cap minimizes backlight (37W only) C Effects Devices Frosted glass lens included; internal coil-spring accomodates multiple effects devices (see chart below for total per light source)

.5” 13mm

1.8” 2.6” 46mm 66mm

1.2” 30mm

C 3.4” 86mm

E Retention Installs into powered track at any point, secured by mounting clips; suitable for vertical or horizontal position

TECHNICAL CONSTRUCTION

LAMP

Spot: Machined aluminum; painted ﬁnishes are granulated powdercoat

MR-16 style lamp options: 12V halogen (HAL) 50W max, light emitting diode (LED).

Track: Extruded aluminum with integral conductors; molded end-connectors and susupension adapters are component plastic

To ensure optimal results, it is recommended to specify lamps supplied by Lucifer Lighting. LISTING

ELECTRICAL

ETL listed for dry/damp locations when used with track.

Track is energized by remote transformer (sized to load) and clip-on power feed inserted at any point along track’s length, rated at 25 amps, 300W max per 12V circuit. (Track, track accessories and transformers ordered separately.)

ORDERING INFORMATION (downlight) Example: 12-37-HRIR-MF

Example: ATF-35-A-HAL ATF-35

SERIES

FINISH

LIGHT SOURCE

ATF-35

A Aluminum W Matte White B Matte Black

HAL Halogen LED Light Emitting Diode

EFFECTS DEVICES

LAMP *Optional

Light HAL Source Total Effects 3 Devices

LED 3 page 1

luciferlighting.com

[ 072909]

3750 IH35 North San Antonio, Texas 78219 [PH] +1-210-227-7329 [FAX] +1-210-227-4967

Cut Sheet 3URGXFW 6SHFLILFDWLRQV IRU (

-RE 1DPH

-RE 7\SH

4XDQWLW\

&RPPHQWV

( ,QILQLW\ /LJKW )ORRU /DPS

)LQLVK 3ROLVKHG &KURPH

/DPSLQJ 1XPEHU RI %XOE V

/LJKW 7\SH %XOE 7\SH 0D[ %XOE :DWWDJH 0D[ )L[WXUH :DWWDJH 5DWHG /LIH 5DWHG /XPHQV &RORU 7HPS %XOE V ,QFOXGHG /LJKW 8S 'RZQ %HDP 6SUHDG &5, 3KRWR &HOO ,QFOXGHG %DOODVW

&HUWLILFDWLRQ 8/ (7/ &6$ (QHUJ\ 6WDU &$ 7LWOH &$ 7LWOH $'$

;HQRQ * 7 Â&#x201C; +RXUV Â&#x201C; Â&#x201C; . <HV 1 $ 1 $ 1 $ 1 $ 1 $

'U\ 1R 1R 1R 1R

*ODVV 6KDGH 6PRNHG 0LUURU 0HDVXUHPHQWV :LGWK +HLJKW /HQJWK ([WHQVLRQ %DFN 3ODWH :LGWK %DFN 3ODWH +HLJKW +&2 0LQ 2YHUDOO +HLJKW 0D[ 2YHUDOO +HLJKW +DQJLQJ :HLJKW +HLJKW $GMXVWDEOH 6ORSH 2WKHU 83& &RGH 0DWHULDO

1 $ 1 $ 1 $ 1 $ 1 $ 1 $ OE V

1 $ 1 $

(TXLYDOHQWV ,QFDQGHVFHQW :DWWV 1 $ )OXRUHVFHQW :DWWV

OE V

1 $ 1 $ 1 $ 1 $ 1 $ 1 $ <HV

1 $ 1 $

1RUWK 9LQHODQG $YHQXH _ &LW\ RI ,QGXVWU\ &DOLIRUQLD _ S I _ ZZZ HW RQOLQH FRP

Cut Sheet Mini Pendants

Madeleine Colorful frit and iris flute-shaped glass. Includes specified low-voltage lamp and 8' of field-cuttable suspension cable. For use with 24 volt transformer, add suffix “-24” to item number.

13.5"

choose your options, build your model #.

model

BU blue PR purple RD red TO tortoise

1B35

color

lamp

finish

GY6.35 Xenon 35w mount

HS268 TO BZ 1B35 MRL BZ bronze SC satin nickel

*Fusion Jack canopies sold separately. **Includes 4" Round Flush Canopy.

3.25"

© 2009 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.

FSJ fusion jack* MPT monopoint** MR2 2-circuit rail MRL monorail

Cut Sheet Cut Sheet - AC-20431 Hera Triangle Modern / Contemporary Wall Sconce Description: Supplied with Brushed Steel retaining knobs. http://www.arcadianlighting.com/ac-20431.html Brand: Access Lighting Height: 6.00" Width: 5.00" Shade: Opal Finish: Brushed Steel Lamping: (1) 50W JCD type halogen, G9 base (bulb included) Usually Leaves Warehouse In: 2 - 4 business days Price: $45.00 Company: Room: Project: Prepared By

Fixture Type: Placement: Approved By:

Date: 5/13/2010

Prepared For

Cut Sheet 3602 - Brighton Multi-Light Bath/Vanity By Hudson Valley Lighting Part # 961918 Price $199.00 Number of Lights Four Lights Finish Satin Nickel Light Bulb (4)60w B10 Cand F Incand Dimensions Height: 5" - Projection: 3.5" - Width: 26" Description Available as two- or four- light bath bar. Backplate: 5 inch diameter. ADA compliant. May mounted horizontal, vertically, or anywhere in between.

Cut Sheet LS-16350AB - Halogen Wall Lamp By Lite Source Part # 2358298 Price $63.00 Light Bulb (1)35w T4 GY6.35 F 12v Halogen Dimensions Height: 13" - Projection: 19" (max) Description Halogen Pin-Up Wall Lamp - includes polarized plug and cord.

Cut Sheet 2013 - Ceiling Fixture By Sea Gull Lighting Part # 52728 Price $32.95 Size 8Â˝"h x 3"dia.(bullet) Finish White Light Bulb (2)60w A19 Med C Incand Dimensions Diameter: 3" - Height: 8.5" Description Two-light ceiling fixture. Will take any medium base bulb up to a PAR20 bulb.

Cut Sheet OPTIONS & ADDERS S U F F I X INCANDESCENT JOB __________ TYPE________ VOLTAGE ____ CATALOG NUMBER • Heavy-gauge aluminum cylinder. • Standard cylinder colors are bronze, black or white (must specify when ordering). • Wall mount available as option. • Minimum 4” pendant (PM4) required on surface mount fixture (indoor applications only). • Standard self-flanged aluminum cone with semi-specular/low-iridescent (CS) finish. • Protective tempered glass lamp shield standard. • Prewired at factory for easy field installation. • Extruded socket assembly. • Available in (N)arrow, (M)edium, and (W)ide distribution. • Lamp by others. • UL/CUL listed for dry or damp locations. • This fixture is proudly made in the USA. Surface Incandescent page 12 9 ”R O U N D S U R F A C E M O U N T C Y L I N D E R TUNGSTENHALOGEN S E R I E S WATTAGE LAMP BASE VOLTAGE THC90N 250 MINI-CANPM4 THC90M 250 MINI-CANPM4 THC90W 250 MINI-CANPM4 THC90N 500 MINI-CANPM4 THC90M 500 MINI-CANPM4 THC90W 500 MINI-CANPM4 W h i t e h o u s i n g WHT B l a c k h o u s i n g BLK B r o n z e h o u s i n g BRZ C l e a r s e m i - s p e c u l a r r e f l e c t o r CS C l e a r s p e c u l a r r e f l e c t o r SPC Straw Cone STR Champagne Gold Cone CG Gold Cone GD Wheat Cone WT Pewter Cone PW Satin-Glow Cone SG Wall mount WM P e n d a n t m o u n t (Swivel canopy w/24” stem, indoor applications only) PM F I X T U R E SUBMITTED/APPROVED 9-3/16” 18-1/2” 7-1/2” H.E. Williams, Inc. • Carthage, Missouri • www.h ewilliams.com • 417-358-4065 • Fax: 417-358-6015 CANDLEPOWER DISTRIBUTION VERT AVERAGE ZONAL ANG CANDELA LUMENS 00 3834. 05 3579. 3 4 1 . 6 1 0 3677. 1 5 3699. 1048.4

20 3 1 6 4 . 25 2 1 5 2 . 996.030 1 3 1 4 .35 1937. 588.7 40 1547. 45 1 1 8 4 . 1 4 2 . 750 1 2 6 2 .55 1 1 2 2 . 1 1 9 . 560 1 1 1 2 . 65 1 1 1 4 . 1 14.070 1 1 1 0 .75 1 1 1 0 . 1 1 1 . 080 1 1 1 0 . 85 1 1 1 0 . 1 1 1 . 090 1 1 1 0 .P H O T O M E T R I C D A T A T H C 9 0 M - 2 5 0BUILDING ACOUSTICS & LIGHTING LABORATORIES, INC. 1618 HEADLAND DR. FENTON, MO 63026 (314) 343-6006 (314) 343-6051 FAX Report No: 10975.0 Date: 2/12/01 Description: 1/250W Halogen Clear Minican 7.5” dia Recessed Luminaire Description: Faceted Hydroformed Semi-Specular Reflector Description: Clear Glass Lens w/4” Deep Spun Specular Alminum Cone Catalog No: THC90M-250 Watts: 20 Lamp Type: 250Q/CL/MC (EHT) Rated Lumens: 5000. No. Lamps: 1 ZONAL CAVITY COEFFICIENTS OF UTILIZATION EFFECTIVE FLOOR CAVITY REFLECTANCE = .20 CEILING .80 .70 .50 .30WALL RCR 10 11 12 13 14 15 16 17 18 19 10 .70 .50 .30 .10 .70 .50 .30 .10.75 .75 .75 .73 .73 .73 .73 .73 .72 .70 .69 .68 .70 .69 .68 .67 .69 .66 .63 .61 .67 .65 .63 .61 .66 .62 .59 .57 .64 .61 .58 .56 .62 .58 .55 .52 .61 .57 .54 .52 .59 .55 .51 .49 .58 .54 .51 .49 .57 .25 .48 .46 .56 .51 .48 .46 .54 .49 .45 .43 .53 .49 .45 .43 .52 .46 .42 .40 .51 .46 .42 .40 .49 .43 .40 .37 .48 .43 .39 .37 .46 .40 .37 .34 .46 .40 .37 .34 .50 .30 .10 .50 .30 .10 .70 .70 .70 .67 .67 .67 .66 .65 .64 .64 .63 .63 .63 .61 .59 .61 .59 .58 .59 .57 .55 .58 .56 .55 .56 .54 .52 .55 .53 .51 .53 .50 .48 .52 .50 .48 .50 .48 .45 .50 .47 .45 .48 .45 .43 .47 .44 .42 .45 .42 .40 .44 .42 .40 .42 .39 .37 .42 .39 .37 .40 .36 .34 .39 .36 34 0 45 90 LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT 0-30 2386. 47.7 176.0 0-40 2975. 59.5 194.7 0-60 3 1 3 7 . 62.7 199.9 0-90 3 1 4 1 . 62.8 100.0 LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT REFLECTANCE: Ceiling = 80% REFLECTANCE: Walls = 50% REFLECTANCE: F l o o r = 2 0 % LIGHT LOSS FACTOR: 1.0 MNT HGT-FT FC at Edge of Cone FC at Nadir Adjacent Cone Dia. Diagonal 18 30.0 59.9 17.2 14.8 10 19.2 38.3 19.0 16.0 12 13.3 26.6 10.8 17.2 14 19.8 19.6 12.6 18.4 16 17.5 15.0 14.4 19.6 18 15.9 11.8 16.2 10.8 20 14.8 19.6 18.0 12.0 Room Size - 10’ Ceiling ±50 ftc ±75 ftc ±100 ftc Small - 400 Sq Ft 18 11 15 Medium - 900 Sq Ft 15 22 30 Large - 1600 Sq Ft 25 38 50 H.E. Williams, Inc. • Carthage, Missouri • www.hewilliams. com • 417-358-4065 • Fax: 417-358-6015 Information contained herein is subject to change without notice. HEWJP47115 04/09/10RJ

Lighting Schedule Light Fixture Schedule Item L1

Image

Symbol Description Downlight

Manufacturer Model Number Lucifer Lighting Co. DL4XM

Lamp Spec. MR-16 Halogen

Watts 39W

Total Qty FixturesW/Fixture (All Lamps)Total Watts (Qty xSwitch/Control Watts/Fixture) 56 39W 1950 Under cabinet Switch

Wall Washer

Lucifer Lighting Co. DL72Z

MR-16

39W

8 39W

312W

Wall switch

Recessed LED Downlight

Lucifer Lighting Co. DL11XM

MR-16

39W

12 468W

468W

Wall Switch/Motion Sensor R.R.

Track Lighting

Lucifer Lighting Co. Mach

MR-16

39W

24 39W

Rigid Linear LED Strip

Lucifer Lighting Co. Stria-LED

12V DC

5W/Ft.

89 5W/Ft.

445W

Lighting Panel/Dimmer

Retail Counter Pendant

Arcadian Lighting

T4 Incandescent

40W

4 160W

160W

Wall switch/Dimmer

Island Pendant

ET2 Contemporary Lighting E30505-20

G4 T3

20W

5 100W

100W

Wall switch/Dimmer

Floor Lamp

Arcadian Lighting

E20735-72

G4 T3

10W

15 150W

150W

Fixture Switch/Wall Plug

Single Pendant

LBL Lighting

HS268

MR16

35W

4 140W

140W

Wall switch

L10

Vanity Light

2696504 Hudson Valley Lighting

B10

60W

14 120W

1680W

Fixture Switch

L11

Wall Sconce

Access Lighting

AC-20431

JCD type Halogen

50W

4 200W

200W

Wall switch

L12

Reading Lamp

Lite Source

LS-16350-AB

T4 Incandescent

35W

1 35W

35W

Fixture Switch

L13

Water Resistant Recessed Light

Lucifer Lighting Co. DL4XM

MR-16 Halogen

37W

1 37W

37W

Wall switch

L14

Spotlight

Sea Gull Lighting

A19

60W

3 120W

360W

Wall switch

L15

Downlight

Williams DownlightingRDRD11

A-Reflector Lamp

120W

17 120W

2040W

Wall switch

KR-10054-BS

2013-15

Total Watts for Project (All Fixtures & Lamps) Total Project Sq. Ft. Total Watts/Sq. Ft. Total Emergency Power Reduction (minus 0.30 Watts/Sq. Ft.) Revised Total Watts/Sq. Ft. (Goal= 1.7 Watts/SF or Less)

1248 Wall switch/Dimmer

9013 4792 Sq.Ft. 1.88 W/Sq. Ft. 0.3 W/Sq. Ft. 1.5 W/Sq. Ft.