Lumbermens February 2022 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

P G

FEBRUARY 2022 TM

pg.24>>

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

AUTOMATED OR AUTOMATED OR MANUAL WARRIOR MANUAL WARRIOR AUTOMATED OR

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702

MANUAL WARRIOR

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp DO AA ONE-PERSON DOYOU YOUNEED NEED ONE-PERSON motor, Rotobec continuous PORTABLE NEEDgrapple, A SAWMILL? ONE-PERSON Sam x702 DO YOU 5,000 original hours. PORTABLE SAWMILL? off onto a conveyor. This is a very

well built processor. Item ID 13820.

(excellent condition.). Item ID PORTABLE SAWMILL? TurboSawmill is is the 13238. Chris x700 most TurboSawmill the most automatice firewood processor 1995 Barko 775 Bmost Feller Buncher TurboSawmill is the innovative portable sawmill in the innovative sawmill in the with John Deere power unit with portable - Pumps recently redone. 400 hrs innovative portable sawmill in the world! Designed with swing-blade low hours. Control panel includes on injection pump. always started world! Designed with swing-blade world! Designed with swing-blade unique side22in tach, oil pressure,technology, water temp and good. in goodopen working order. technology, unique open side technology, unique open side amp gauges. Cuts logs up to 16”. patented kohing head. head works great. frame, and automation. frame, and patented automation. One owner and comes with all Item ID 13185. Sam x702 frame, and patented automation. Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

SLABBER quality chips with patented ‘Cone’ Handles logs up to 32”. Uses SLABBER WARRIOR WARRIOR condition. Easily produces high

made the best valued log splitter.

SLABBER WARRIOR drum design. Can easily load 42’ vans and produce 6 - 8 loads per

13HP Honda motor. Manual start but electronic option is available.

a Chomper Model 16 PDA

Barko 160D - accurate, new engine with TurboSawmill 1999 produces TurboSawmill produces accurate, new for $32,500. Item ID 13865. approximately 1500 hours. Hour TurboSawmill produces accurate, dimensional lumber with every cut. Sam x702 dimensional lumber meter dont work. The last 2 owners with every cut. dimensional with every cut. morelumber about the manual LOGGING Learn EQUIPMENT have only used it to load trucks or Learn more about the manual Learn moreas aabout the manual BANDIT backup models. as needed. Has a CTR and automated and automated models. manuals and receipts. Purchased

delimber, grapple has been rebuilt. and automated models.

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

O 50% or better. 475 hp Cummins HEWW TE O OD OD

GTH

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

OO IL L.S H H P

S SA A WW M

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

FE!

LIVI N

LIVI LIVNI

LI FE! LI IFE!

Sawmills Has Log and Lift. Usesadditional 4-way wedge Diesel. 7500 Hours. One owner.WO Sawmillsare areininstock, stock, and additional E OD TH G EDGERS & GANGS adjustable to single two way. Great Well maintained. Item ID 13294. inventory arrives regularly. See updated Sawmills are in stock, and additional inventory arrives regularly. See updated Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Sam x702 inventory on our inventory onFirewood ourwebsite. website. nventory arrives regularly. See- Thisupdated in excellent condition. Runs great. Processor is a 2004 Bandit Beast Model 4680 M I L L-. S day. Item ID 13882. Austin x703

Runs Great!. Item ID 13740. Sam

homemade processor with a 10’

3412 Caterpillar Diesel engine S AW

x702 inventory on our website. M S . I L L FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL SAWMILL.SHOP Jay at 266-8091 SAWMILL.SHOP || runs Call atJust(318) (318) 2010 Shop Built Wood Processor chain and kicker that all off good condition. finished 10 266-8091 1990 Bell Super T - This Bell has Item ID 13644. Sam x702

clearing job, ready to work! a brand new Duetz engine. Lever of a 4 cylinder Mercedes power SAWMILL.SHOP | Call Acre Jay at (318) 266-8091 Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 410

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca ‘13 KMC 2500 Track Skidder

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TOLL FREE 1-888-219-WOOD (9663) Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

a Chomper Model 16 PDA

automatice firewood processor

Item ID: JW-986495 withsplitter John Deere power unit with • Wedge and Contact: J Williams design tolow hours. Control panel includes suit your Ph: (888) 401-6367 x701

needs tach, oil pressure, water temp and • 24 to 72 ton splitting amp gauges. Cuts logs up to 16”. capability One owner and comes with all chain conveyer, 8 way splitter, on • trailer. The splitting 20,000lb goose neck Itemfastest ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 new for $32,500. Item ID 13865. planet. Sam x702 Best Value Portable Log Splitter

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

1. Pioneered N. America’s first commercialChipper firewood processor in the mid 70’s 13HP Honda motor. Manual start - Cat Under Carriage at Boom cylinders have minor leaks.

drum design. Can easily load 42’

vans and produce 6 - 8 saw loads per but electronic option is available.M2030 50% orand better.M2430 475 hp Cummins 2. 3 Bar models available M1820, day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Available Model 44, 44HO, 48, 54 & 60low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable to single two way. Great 36, Well 40, maintained. Item ID 13294. with

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam

in excellent condition. Runs great. Item ID 13644. Sam x702

homemade processor with a 10’ 3412 Caterpillar Diesel engine x702 5. Go to our web site for live action video and details www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 2010 Shop 6. Built Wood Processor chain andjoystick kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has Available with single control - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 410

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

short pop-up transfer to edger,

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

EST

Trelan Chipper - This is a remote

logs onto carriage and track and

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S

of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T New S York ELL EXCHANGE BUY SAVE 1986 Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

DEPARTMENTS

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

deck 20 foot out feed deck cAll uS todAy All youR uSed 72ND ANNUAL GREAT LAKES foR feed equiPMent with needS! 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Listings ............... 6 Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings! Call –

LIST

SELL

EXCHANGE

item id: 14061 contact: Austin x703

EXCHANGE

BUY

SAVE

LOGGING & BIOMASS EXPO

Reduced PRice item id:14021 contact: Sam x702

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

EQUIPMENT REPS

✁

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

http://www.kfia.org/ Sam KentuckyWoodExpo.aspx (888) 401-6367

item id: 14061 contact: J Williams x701

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co Issue 364 lumbermenS

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

Austin S & W 125 Band Mill with

(888) 401-6367 Caterpillar generator - Low hours

Ext. 702 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct sam@lumbermensco.com

DESIGN DIRECTOR



BUY

SELL

Phone

Address

Individual Name

LIST

*Company name and address required to process your change.

Company Name*

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

❑ Please add

Free Equipment Escanaba, Michigan(888) 401-6367 machine, with air strain conveyers Safety Alert ................................... 20 that go up and down, with airbags, MID-ATLANTIC LOGGING & BIOMASS Morris it includes two sets of Mcdonough Chris In the News ..............................E 22-23 Fri, 15 Sept - Sat, 16 Sept ST 1986 PUBLISHER AD Sales pressure guides. Top Casting wheel 2012 JoHn deere Selma, North Carolina (888) 401-6367 Woods Publishing 548G3 (888) 401-6367 www.midatlantic-logging-biomass is supported on both sides. This Calendar of Events ....................... 23 MID-ATLANTIC Ext. 700 ADVERTISING SALES expo.com/ Ext. 704 is an extremely accurate machine Morris Woods chris@lumbermensco.com morris@lumbermensco.com Deals of the Month ....................... 24 KENTUCKY in ve1y good condition, Cuts 130 (888) 401-6367 ext. 704 WOOD EXPO morris@lumbermens.co feet a minute also has CLT presses. 15 Sept - Sat, 16 Sept Ad Directory ................................. 38 Fri,Lexington, MARKETING DIRECTOR Item ID 13876. Austin x703 Kentucky

For classifieds Call toDay (888) 401-6367 ❘

Walker

(888) 401-6367 Ext. 707 ❘

walker@lumbermensco.com

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, Lumberman's Exchange Mfgwood .............................. sawmilling, manufacturing, andCorley secondary manufacturing32 P.O.pallet Box 1916 industry, is freeTN within the United States to qualifying manufacturers Columbia, 38402 CRD Metalworks .................... 25 and industry suppliers. Please limit your subscription to one free copy per company orExchange mill locatiison. The Lumberman's CW Mill-ArmorHog .............. 17

published monthly by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, Box 1916, Magazine,P.O. 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old addressDyna label. Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND Adverti sers are................... responsible 8 submissions are used at the RESPONSIBILITY: Empire Hydraulics discretion of the publisher and may for the contents and claims of their advertising. Lumbermens™ accepts beno edited for purposes of their clarityclaims. No Great Lakes Mfg. .................... responsibility for part of this publicati on may be34 and space. Although all efforts reproduced or transmitt edhave in any form or by any means, electronic Hahn Machinery ...................... been to ensure accuracy photocopying, of or made mechanical, including recording or any information 3 content submitted by advertisers storage retrieval system, without Hurst permission of Lumbermens™.14 Boiler ............................. and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ................................... Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 use outside ofwith Lumbermens™. Lumbermens™ will exercise in right wholeto orits part, is prohibited precauti on in writing, designing,Lignomat and printi................................. ng material contained 24 outevery written consent. within. We shallWoods not bePublishing liable for omissions or typographical errors. ©2017

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

 liSt  Sell  exchange  buY  Save

Baker ...................................... 5, 7

works,1 1/2" or 2" band, 22ft. track austin@lumbermensco.com

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

 Since 1986

on the703 mill, electronic computer Set Ext.

Sam x702 Joe

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

(888) 401-6367 2010 Cardinal HD Carriage Ext. 709 Carriages lumbermenSmagazine.com (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

with onboard log turners, carriage

drive, hyd pac for carriage, Julie Menominee Saw ..................... 29 sawyers cab, computer controls, 401-6367 cabinet with electronic drives for Metal Detector's Inc(888) . .............. 30

Ext. 701 Midwest Sharpening.............. 26

carriage knees, husk including

julie@lumbermensco.com 48" bottom

Morbark ..................................... 9

saw and 36" top saw

STACKING The Tree that RACit All! Started

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has pub lished a month ly circular Select Sawmill ......................... 19 reaching sawmills, loggers, pallet makers, recyclers and industrial woodSawmill working........................... plants worldwide. Smith 4 PUBLISHER The Paul Bunyan Show ......... 39

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union Grove Saw & Knife.. 2, 37 Ted Monnin Universal Refiner ................... 23

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 WoodMizer ................................ l (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 www.BakerProducts.net W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) BANDMILLS & HEADSAWS

CARRIAGES & DRIVES

DANCKAERT BAND RESAW 2010 CARDINAL HD Roughly 10 hours on this CARRIAGE CARRIAGES machine since it has been Cardinal Carriage line it includes rebuilt, it has a 24 foot in feed carriage with onboard log deck 20 foot out feed deck turners, carriage drive, hyd with 44 inch wheels, and all pac for carriage, sawyers cab, the bells and whistles, its a computer controls, cabinet with production machine, with air electronic drives for carriage strain conveyers that go up and knees, husk including 48” down, with airbags, it includes bottom saw and 36” top saw, two sets of Mcdonough short pop-up transfer to edger, pressure guides. Top Casting belted rollcase to clear slabs wheel is supported on both and cuts from sawline, log stop and loader to drop logs onto sides. ThisVictory is an extremely 13428 Ln. // PO Box 124 accurate machine in very good carriage, heavy duty log turner Adams Center, NY 13606 condition, Cuts 130 feet a under log stop and loader to minute also has CLT presses. deal with big logs onto carriage and track and frame. Item ID 13876. Austin x703 Item ID 13198. Sam x702

Item ID: JW-909632 Contact: J Williams Ph: (888)CHIPPERS 401-6367 x701

PRECISION 58 CHIP PAC Single chute loading system. Item ID 12764. Sam x702 COMPLETE SAWMILLS

2006 WOODMIZER LT300 This mill is currently running, and includes the sawmill, and cab. An incline conveyers, a transfer table and two sets of roller tables. This mill saws a ‘13 KMC 2500 Track million board feet or more of Skidder walnut every year. Max log diameter 36in, Max Width Item ID: 14078 of cut 25in, The width of the Contact: Austin band is 1 1/2 Inches.x703 Video of Ph: (888) 401-6367 it operating is available, and can be sent upon request. Item 13892. Austi off ontoID a conveyor. This n is x703 a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703 DRY KILNS

MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum drive, fan and cyclone. Item ID 13925. Austin x703

‘95 John Deere MEC 12 X 42 C6 TRIPLE PASS DRUM DRYER Tree Farmer 12 x 42 Mec triple pass Drum Itemcomes ID: 13920 Dryer, with trunnions. Contact: Austin Item ID 13924. Austin x703 Ph:DYNAMIC (888) 401-6367 x703 CHIPPERS 2004 JCB 441 WHEEL LOADER 3,509 hours on this machine, capacity!. works Item ID Sam x702 everything as13421. it should. I have BARKO many videos available of it running, and be 160B sent-upon request. 1994can Barko Electric Item ID 13888. Austi x703 knuckleboom, 30' boom,n75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

ARE YOU SERIOUS ABOUT THE low hours. Control panel includes tach, oil pressure, water temp and

on injection pump. always started

good. in good working order. 22in

FOREST PRODUCTS BUSINESS?

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

THE AWARD-WINNING EXPO Log RETURNS TOSam ESSEX x702 JUNCTION, VERMONT Best Value Portable Splitter meter IN dont2022! work. The last 2 owners Join us to celebrate this essential industry and to getEQUIPMENT back to serioushave business. with 1700 hours, in very good - Small manufacturer in PA has LOGGING only used it to load trucks or condition. Easily produces high made the best valued log splitter. BANDIT as a backup as needed. Has a CTR quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

drum design. Can easily load 42’

13HP Honda motor. Manual start

Every two years hard-working day. Item ID 13882. Austin x703 thousands HasofLog Lift. Usespeople 4-way wedge

at the Champlain Valley Exposition to conduct EDGERS &gather GANGS adjustable to single two way. Great

serious business. The Northeastern Forest Products Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Equipment Expo is the largest and best exposition of in excellent condition. Runs great. Firewood Processor - This is a supplies and services, heavy equipment and trucks – Item ID 13644. Sam x702 homemade with a 10’ for loggers and land clearers, tree careprocessor professionals FIREWOOD PROCESSORS log deck. a hydraulic grapple, and firewood dealers, sawmillers andHas landowners. 2010 Shop Built Wood Processor

chain and kicker that all runs off

inch insert tooth circle saw, 30 foot

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

If you’re serious about the forest94products business – Diesel. 7500 Hours. One owner. Barko 275 - Excellent value you need to attend or exhibit.

Well maintained. Item ID 13294. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

For information about the 2022 Loggers’ Expo: visit northernlogger.com Runs Great!. Item ID 13740. Sam 3412 Caterpillar engine x702 emailDiesel expo@northernlogger.com with 850 HP. call 5300 hrs. Mill in BELL 315-369-3078 2004 Bandit Beast Model 4680 -

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

- It has a 353 Detroit diesel, 40 clearing job, readyu to work!JUNCTION, a brand new Duetz engine. Lever of a 4 ucylinder Mercedes 2022 LOGGERS’ EXPO MAY 6-7, 2022 upower CHAMPLAINAcre VALLEY EXPOSITION ESSEX VERMONT

 Issue 364 410

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Public Online Auction NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Boonville, New York White River Log Home/Rocky Mountain Log www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Start Date: 10am | Thursday - March 17 BANDMILLS & HEADSAWS SOUTHWEST FOREST -PRODUCTS End Date: 10am | Thursday March EXPO 24 Murphy Co. Danckaert James Band G. Resaw - Roughly Fri, 25 August - Sat, 26 August 425.486.1246 Preview: 8am - 4pm | Wednesday March 23 10 hours on this machine since it Hot Springs, Arkansas Murphyauction.com www.arkloggers.com 1883 HWY 93 S., Hamilton, MT 59840 has been rebuilt, it has a 24foot in

(1 OF 2)

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing HUNDEGGER K-2 ADVERTISING SALES

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

(2 OF 2)

PUBLISHER

MID-ATLANTIC HUNDEGGER K-2

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass BENZNER 16” ROUNDING UNIT expo.com/

is supported on both sides. This

BENZER LOG ROUNDING UNIT

is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

TIMBERWOLF

JEFFREY 30-48 HOG, 50HP

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track PENDU KD-20 LOG

56” CIRCLE Cambridge, OhioSAW www.ohioforest.org

Cat 3406 140KW Genset, 12,400 CANTING SYSTEM hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at Homes www.LumberMB\ISmagazine.com

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H.2005 Payne .............................. PENDU NES8379/A 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

REAL ESTATE WILL BE AUCTIONED OFF

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg . ..................... Start Date: 10AM | March 16 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Date: 10AM | March 23 BuckEnd Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and 2013 are TRANSCRAFT DTL-2100 associates, not held liable for 53’ T/A Reproduction, FLATBED errors or omissions. in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

MORE INFORMATION AT 17 CW Mill-ArmorHog ..............

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

P.O. Box 1916 Columbia, TN 38402-1916 SCOTCHMAN 6509-24M 65-TON (888) 401-6367 IRON WORKER

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

HEWING MACHINE

1883 Hwy 93 S., Hamilton, MT 59840 CorleyPREVIEW Mfg .............................. 32 AVAILABLE BY APPOINTMENT

MURPHYAUCTION.COM

48" bottom saw and 36" top saw

STACKING RAC

Multitek ................................... 12

1997 BOBCAT 773

(1 OF 2) Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

drive, hyd pacMVT1130L for carriage, MANITOU

1992 JOHN DEERE 544E

Dyna Products ........................ 35

2005 KENWORTH T300

with onboard log turners, carriage

2000 MANITOU MVT1340L

(2 OF 2)

2004 KENWORTH T800B

Universal Refiner ................... 23

www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l Equipment & Rolling Stock - Bid Online - Murphyauction.com - 425.486.1246 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 7

140

Phone 315.284.4126 2008 DYNAMIC 585 CHIPPER Fax8 way splitter, on 20,000lb 315.849.2045 goose neck trailer. This is a 2008 dynamic cone Website Item ID 13916. Austin x703 head chipper with 1700 hours, www.empirehyd.com in“Precision very good on. EasilyEmail Underconditi Pressure” info@empirehyd.com

produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 FIREWOOD PROCESSORS

2010 SHOP BUILT WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot chain conveyer,

000

702

FIREWOOD PROCESSOR This is a Chomper Model 16

PIPER’S Saw Shop

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Promotional Pricing Offer

Simonds Red Streak Hard Back ‘057/8” Gehl CTL 70 1-1/4” x .042 x 3/4” or L im it e d Length 13’2”Item ID: JW-986495 Contact: J Williams T im e Ph: (888) 401-6367 x701

$14.71 $14.27 each

‘83 John Deere 4850 Tell us you saw it here! Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

this skidder at only 3700. These

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

ly - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power ower inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks ew  Issue 1986 410 arch with364 winch.Lumbermens Low hours on™  since Cat D5B Dozer❘ - Cat  D5BList s/n  seLL

still

LOGGING EQUIPMENT Contact: J Williams BANDIT Ph: (888) 401-6367 x701 2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just

‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

used vans and produce 6 - 8 loads per or a day. Item ID 13882. Austin x703

702

FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs oﬀ of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks oﬀ onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

PDA automatice ﬁrewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes ‘16 all Halverson with manuals and H140 receipts. Purchased new for $32,500. Skidsteer (DEMO) ItemID: ID JW-909632 13865. Sam x702 Item

22X380, direct drive, EROPS,

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

finished 10 Acre clearing job, ready to work! Remote control. Big production capacity! Item ID 13421. Sam x702 BARKO

‘931994 Barko 180B BARKO 160B

Item ID:knuckleboom, 14077 Electric 30’ Contact: boom, 75hpAustin motor, Rotobec Ph:nuous (888) 401-6367 conti grapple, x703 5,000 original hours. (excellent condition). Item ID 13238. Chris x700 BELL

1990 BELL SUPER T This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny has been notDeere long ago. C6 Hour ‘95rebuilt John meter is inop. New paint. Runs Tree Farmer perfect. Has heat and air, it just Item needs toID: be 13920 ﬁxed. Contact: AustinSam x702 Item ID 13896. Ph: (888) 401-6367 x703 1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires 50%.Sam Deutz capacity!. Item IDat13421. x702 engine. Hour BARKO meter broken. Item ID 13543. Sam x702 1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 exchange buy save come hook up to  it and go  to your

job site and put it to work to up

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 9

Phone 315.284.4126 Fax BELL TREE CUTTER 99’ CASE 850G Around 1000 hours on 315.849.2045 theWebsite LONG TRACK DOZER One owner machine, only machine. New air cooled motor www.empirehyd.com only aboutUnder 300Pressure” hours. RebuiltEmail3300 original hours, has never “Precision info@empirehyd.com

dangling head. Several bars and chains. Machine came oﬀ the job in February and is ﬁeld ready. Item ID 13943. Austin x703 CASE

2006 CASE 440 SKID LOADER With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent upon request. Item ID 13886. Austin x703

been used in the woods, it has a ripper on the back, original pads, and chains, Under carriage is new along with new rollers on the bottom, and new sprockets. Item ID 13909. Austin x703 CATERPILLAR

1994 CATERPILLAR 320 Dry machine that is in good condition for the year. The stick and bucket cylinder have been repacked. It has

a thumb and bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been replaced a couple years back. Machine is working daily. ‘16 ItemHalverson ID 13936. AustiH140 n x703

Skidsteer (DEMO)

1994ID: CATERPILLAR Item JW-909632 D4 HI TRACK JWITH GRAPPLE Contact: Williams This is an extremely Ph: (888) 401-6367 x701 low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain. Undercarriage is still in excellent shape. Fixed grapple

and no winch. Item ID 13932. Sam x702 1996 CAT 214 MOBILE EXCAVATOR with 36’ magnet 3 tons ‘93shear. Barko steel low 180B hrs! All hard Item4ID: 14077 tires, outriggers ideal for Contact: AustinIt also has scrap business. Ph:swavel (888) 401-6367 x703 48’ bucket for street ditch clean up. Item ID 13441. Sam x702 1998 CATERPILLAR 515 Grapple with winch, no heat or air. Open cab skidder with 9800 hours. Tires are 28L’s, rear 90% and fronts are 30% with new bear paws chains. ‘95 John Deere C6 Item ID 13801. Sam x702

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 410

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

2005 525B Item CATERPILLAR ID: 13920 This is a dual arch skidder with Contact: Austin winch. Very 401-6367 low hour x703 skidder Ph: (888) with 7900 frame hours and only 63 hours on a new engine. Continuous grapple, tires are capacity!. Item ID 13421. Sam x702 30.5’s @ 70%. This is a really BARKO nice skidder for the price. 1994 Barko 160B - Electric Item ID 13816. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 11

Phone 315.284.4126 2007 CATERPILLAR D6N LGP Faxpump and Charge pump. 315.849.2045 Item ID 13616. Sam x702 DOZER ENCLOSED CAB Website CLARK Overall: Cab Heat &www.empirehyd.com AC, Email 150HP Cat C6.6L, 90% “Precision Under Pressure” CLARK RANGER 665D info@empirehyd.com

Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028. Item ID 13567. Chris x700

Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always ﬁres right up, and runs with no issues. Item ID 13748. Austin x703

2000 CAT 515 GRAPPLE SKIDDER One Owner Runs great! Is it an excellent condition. Rubber is around 75% Has new Hydraulic

EARLY 70’S CLARK 664 CABLE SKIDDER some center slack, needs

front tires, comes with a spare tire. Gearmatic 19 winch doesn’t hold good. 453 Detroit power unit. Item ID 13629. Sam x702 JEM

EXPORT LOG ‘16 Halverson H140 DEBARKING LINE Skidsteer (DEMO) Reconditioned 35 Nicholson A-5 debarker, cab, Item ID: JW-909632 infeed hour glass rolls, log Contact: J Williams Ph: (888) belt 401-6367 dischage with x701 side log kickers. Call 208-451-0365 for details. $279,000

JOHN DEERE

‘92 JOHN DEERE 590 D CUTTER Will need pads in the future, sprockets and rails are about 85%, it has a 4cyl JD motor. It has dangle hd. w/ a ‘93a Rotnee Barko 180B bar saw and a spare idler. Item ID: 14077 Item ID 13612. Contact: AustinChris x700

Ph: (888) 401-6367 x703 1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been ﬁxed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two reverse, with a winch. ‘95 John Working daily. Deere C6 Item ID 13920. Austin x703

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 410

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

 List  seLL  exchange  buy  save

Item ID: 13920 04 648GIII JD DUAL ARCH Contact: Austin SKIDDER Ph:Machine. (888) 401-6367 x703 Slick Runs good motor is in top notch condition. Item ID 13610. Sam x702

capacity!. Item ID 13421. Sam x702

2004 JOHNBARKO DEERE 648GIII This machine has 13000 total 1994 Barko 160B - Electric hours on the body, with only knuckleboom, 30' boom, 75hp 3000 hours on the new momotor, Rotobec tor, comes withcontinuous a set of chains, grapple, 5,000 working daily.original hours. Item ID 13878. Austi n x703 (excellent condition.). Item ID 13238. Chris x700

2006 JOHN DEERE 700J DOZER 1995 Barko 775 B Feller Buncher This work horse comes with a - Pumps recently redone. 400 hrs winch, and new undercarriage, pump. started itonisinjection tight and dryalways & running good.with in good working daily 4500 hours.order. 22in Item ID 13883. n great. x703 kohing head. headAusti works Item ID 13185. Sam x702

2006 JOHN DEERE 748GIII 1999 Barko 160D - new engine with 8700 hours, running daily. approximately 1500 hours. Hour Item ID 13881. Austi n x703

meter dont work. The last 2 owners

06 JDonly FIREWOOD have used it toPROCESSOR load trucks or This is a Chomper 14, as a backup as needed.super Has a CTR with a 60hp engine. In very nice delimber, grapple has been rebuilt. shape. Only 171 hours, comes Boomgreen cylinders have minor leaks. with chain conveyer. All Item ID 13694. Sam x702 of the manuals for the engine, and the 275 chopper itself come 94 Barko - Excellent value with it, as well as all of with low at hours at 3,500. 5.9the electrical schematics. CUMMINS continuous grapple. Item ID 13894. Austin x703 Runs Great!. Item ID 13740. Sam x702 2012 JOHN DEERE 548GIII

BELLwinch, blade Single arch with extensions, 1 Tnew and 1990 Bell Super - This28L Bell has 3a brand @ 50%. This is sti ll a new new Duetz engine. Lever machine with only 3600 hours. control, 33” bar, pump and tranny Item ID 13780. Sam x702 ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

CARRIAGES & DRIVES

LINK** Carriages (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood Sawmill MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & B Mfg . ............................... 18 M&F Gauge ............................. 28- Two proven P.O. Box 1916 • Corley lnfeed and Edger with Lewis Optimization with onboard log turners, carriage Columbia, TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS May be sent to cabinet with electronic drives for • True HardwoodBell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange •Lumberman's Value priced with allMfgof.............................. the optimization capability12 of more Corley 32 Multitek ................................... P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series Edger RAC and

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call. LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE

❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23

www.BakerProducts.net

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

www.lewiscontrols.com 800.S48.6914 I S73.663.7711 ❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 13

Phone 315.284.4126 2009 JOHN DEERE 648H Fax x7032003 FRANKLIN Q80 315.849.2045 GRAPPLE SKIDDER This is a one owner machine, Website every switch works, interior 7500 hours, but just 5000 www.empirehyd.com is “Precision very clean, radio, heat/Emailhours on reman engine. New Under Pressure” info@empirehyd.com

ac. Air ride works as it should. Tires are 30.5x32. Extremely clean machine with no leaks. Cutting edge on blade is excellent, with no cracks or welds anywhere. Item ID 13747. Austin x703 FRANKLIN 1995 FRANKLIN 170 Enclosed cab, single arch with a winch, new paint, 4 brand new 23.126 ﬁrestone tires, around 15000 hours. Item ID 13910. Austin

Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. Item ID 12450. Sam x702 GRINDMASTER

SUDDRETH HORIZONTAL GRINDER This is a 60 HP low rpm Horizontal grinder, comes with a blower, and the blower connects to the grinder with a pipe. It has top and bottom infeed rolls. Overall lightly used, in really good shape.

Width capacity is around 30” maybe even wider. Item ID 13889. Austin x703 HYDRO-AX 1998 HYDRO AX 611EX SAW HEAD FELLER BUNCHER with about 8800 H140 hours. ‘16 Halverson Bunching Saw Head has large Skidsteer (DEMO) pocket for accumulati on and Item ID: JW-909632 lifting side shield for notching Contact: J Williams larger trees before felling. Ph: (888)engine. 401-6367 Cummins 28Lx701 tires at 60%. Decent running condition. Item ID 13245. Sam x702 2002 HYDRO AX 621E Arouund 12,000 hours on this machine. Working daily. Item ID 13884. Austin x703

1998 711EX SAW HEAD FELLER BUNCHER 30.5-32 tires at 40%; Cummins Engine rebuilt 1500 hours ago; 8750 hours; Quadco 22” Large ‘93 saw Barko tree head.180B Heat and Item ID: 14077 A/C work. New bearings in Contact: Austin saw. Cutting trees today. Ph: (888) 401-6367 Item ID 13353. Samx703 x702 KMC KMC TRACK SKIDDER 2500P John Deere Dual Arch Grapple, John Deere winch, Model 4000, Cummins Engine, Model 6BTA, Clark Transmission 28000. Item 13738. Austin x703 ‘95IDJohn Deere C6

Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

automatice firewood processor

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

with John Deere power unit with

low hours. Control panel includes

Item ID: 13920 Contact:Proudly Austin made Ph: (888) 401-6367 x703 in the USA capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

tach, oil pressure, water temp and good. in good working order. 22in ‘83 John Deere amp gauges. Cuts logs up to 16”. kohing head. head works great. 4850 All Of Our Splitters Are Able To Be Towed Safely At Highway Speeds chain conveyer, 8 way splitter, on Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703 • Firewood Processors Best Value Portable Log Splitter

• Wood Splitters- Small manufacturer in PA has condition. Easily produces high made the best valued log splitter. • Bundlers quality chips with patented ‘Cone’ Handles logs up to 32”. Uses • Grapples drum design. Can easily load 42’ 13HP Honda motor. Manual start vans and produce 6 - 8 loads per but electronic option is available. • Conveyors day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge GANGS Splitters adjustable to single two way. Great •EDGERS Skid& Steer Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 • Open to customization in excellent condition. Runs great. Firewood Processor - This is a with 1700 hours, in very good

Item ID 13644. Sam x702

homemade processor with a 10’

2010 Shop Built Wood Processor

chain and kicker that all runs off

FIREWOOD PROCESSORS

inch insert tooth circle saw, 30 foot  Issue 364 410

Item ID 13185. Sam x702

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

manuals and receipts. Purchased Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

of a 4 cylinder Mercedes power

❘

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work! a brand new Duetz engine. Lever Email: sales@bruteforceusa.com

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

1999 Barko 160D - new engine with

Invest Less - Produce More! 94 Barko 275 - Excellent value Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 www.bruteforceusa.com Sam x702 CUMMINS continuous grapple. Diesel. 7500 Hours. One owner.

CONTACT PRICING log deck. Has a hydraulic grapple,FOR with 850 HP. 5300 hrs. Mill in

Call 715-678-0037

- It has a 353 Detroit diesel, 40

One owner and comes with all

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

UNIVERSAL REFINER Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

REscanaba,AMichigan T

MID-ATLANTIC

LOGGING & BIOMASS EXPO

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

The H.A.W.G. unbelievably simple, durable EQUIPMENTis REPS Sam Wall and fast, yet it will grind almost anything and (888) 401-6367 ext. 702 make sam@lumbermens.co a ﬁnished product in just one pass... Austin WoodsIs ideal for grinding: Asphalt, even pulp chips. (888) 401-6367 ext. 703 Shingles, Construction Waste, Green Waste, austin@lumbermens.co Stumps, Diﬃ cult/Dirty Material, Tropical MAILING ADDRESS B & B Mfg. ............................... 18 P.O. Box 1916 Waste (Palm & Palmetto), etc. Columbia, TN 38402-1916

bells and whistles, its a production machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

ADVERTISING SALES

10 hours on this machine since it has been rebuilt, it has a 24foot in

works,1 1/2" or 2" band, 22ft. track

The R-MAG wood waste grinder Cat 3406 140KW Genset, 12,400 Cambridge, Ohio is a portable www.ohioforest.org hours ready to run. ID 13434. that can be used in many areas ofItem recycling. Sam grind x702 They can easily and safely lawn clippings, CARRIAGES & DRIVES on leaves, land clearing, construction/demoliti 2010 Cardinal HD Carriage waste logging slash, stumps, log yard waste, Carriages (Sawmill) - Cardinal railroad ties, storm waste, tropical (palm and Carriage line it includes carriage M&F Gauge ............................. 28 palmetto) waste etc. with onboard log turners, carriage

** INFO LINK**

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Kilgore Saw ............................. 22

Universal Refiner ................... 23

800-277-8068 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Corley Mfg .............................. 32

48" bottom saw and 36" top saw

STACKING RAC REFINER

Multitek ................................... 12

UNIVERSAL

Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 The BEST Industrial Grinders/Shredders Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 on the Planet for over 35 years. Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37

P . O . B O X 1 Lignomat 5 1 ................................. � M O 24NWoodMizer T E S................................ A N O ,l Wwww.BakerProducts.net A 98563 800.S48.6914 I S73.663.7711 - USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 FaxKomatsu U/C at 95%. 35% KOMATSU 315.849.2045 Pads. 6 Way Blade. Fully En2007 KOMATSU PC220LCWebsite closed comfort cab. Great price! www.empirehyd.com w/2009 Log Max 7000XT process-Email Item ID 13570. Sam x702 “Precision Under Pressure” info@empirehyd.com ing head. 9700 hours on carrier.

7200 hours on Log Max. Excavator style. Cab guard. Flotation pads. One owner. Very good condition. Item ID 13464. Sam x702 2008 KOMATSU D61-EX DOZER Great Condition. 4511 Hours.

2012 KOMATSU D61EX 15 DOZER with only 750 Hours. Triple Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; Undercarriage at 90%; Excellent Condition! Item ID 13459. Sam x702

2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition. Item ID 13937. Austin x703 LIEBHERR 2007 LIEBHERR A924C

LOG HANDLER RUBBER ‘16 Halverson H140 TIRED LOG LOADER Skidsteer 13,000 hours.(DEMO) 40’ Reach

Itemtwo ID: JW-909632 with section boom. 60” Contact: J Williams Log Grapple with continuous Ph: (888) 401-6367 x701

rotation. Fixed Cab Riser with cab guard protection. Front push blade. Tight and dry. Cleaned, Serviced, and Checked out for service. Can pull loaded trailer. ‘93 Barko 180B 4-Wheel drive and steering. Item ID: 14077 Top Quality machine. Would Austin beContact: great for log yard or mill Ph: (888) 401-6367 x703 work. Item ID 13476. Sam x702

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078

Nothin eats trees Contact: like Austin a Mastodoncapacity!. Item ID 13421. Sam x702

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Ph: (888) 401-6367 x703

BARKO Mastodon Forestry Mulchers with feed control cutting teeth cut faster, longer and make better - Electric mulch than the competition. No sharpening, efficient direct divetrains, and 1994 a 2 Barko year160B warranty.

offlike onto a conveyor. This is a very knuckleboom, 30' boom, 75hp eats a TheNothin next generation of forestry mulcher has arrived. Nothin eats trees trees like a Mastodon Mastodon well built processor. Item ID 13820.

motor, Rotobec continuous

Mastodon Forestry Mulchers with feed control cutting cut faster, longer and5,000 make better www.mastodon.com Sam x702teeth grapple, original hours. Mastodon Forestry Mulchers with feed control cutting teeth cut faster, longer and make better mulch than the competition. No sharpening, efficient direct divetrains, and a 2 year warranty.

Firewood Processor - This is condition.). Item ID mulch than the competition. No sharpening, efficient direct divetrains, and (excellent a 2 year warranty.

MastodonThe Feed next Control Cutting System The next

generation of forestry mulcher has arrived. a Chomper Model 16 PDA 13238. Chris x700

generation of forestry mulcher has arrived. ‘05 Gehlwww.mastodon.com CTL 70 automatice firewood processor 1995 Barko 775 B Feller Buncher

Patented Carbide Cutting www.mastodon.com Item ID: JW-986495 with John Deere power unit with FeatureContact: J Williams Mastodon Feed Feed Control low hours. Control panel includes Control Cutting System Ramp Mastodon Feed Ph: (888) 401-6367 x701

‘83 John Deere Control Cutting System Patented Carbide Cutting Feature Feed Control 4850 Patented Carbide Cutting Ramp

tach, oil pressure, water temp and

chain conveyer, 8 way splitter, on Feature Item Feed ID: 14073 Control 20,000lb goose neck trailer. Item ID Contact:Ramp Austin Chip Storage 13916. Austin x703 Ph: (888) 401-6367 x703 Feature Best Value Portable Log Splitter

Chip Storage with 1700 hours, in very good - Small manufacturer in PA has Feature Patent #11,130,138

condition. Easily produces high made the best valued log splitter. Chip Storage quality chips with patented ‘Cone’ Handles logs up to 32”. Uses Patent #11,130,138 Feature drum design. Can easily load 42’ 13HP Honda motor. Manual start vans and produce 6 - 8 loads per

but electronic option is available.

Patent #11,130,138 Has Log Lift. Uses 4-way wedge

day. Item ID 13882. Austin x703

EDGERS & GANGS

BrewcoM60-F Saws - Two Brewco Saws

Rexroth Piston Motor in excellent condition. Runs great. M60-F Fixed Displacment

Rexroth Piston Motor Item IDAjustable 13644. Sam x702 Breaker Bar Fixed Displacment Direct Drivetrain Ajustable Breaker Bar Direct Drivetrain

FIREWOOD PROCESSORS 2010 Shop Built Wood Processor M60-F Pistondiesel, Motor40 - It has Rexroth a 353 Detroit

Fixed Displacment inch insert tooth Breaker circle saw, Ajustable Bar30 foot Direct Drivetrain

 Issue 364 410

adjustable to single two way. Great

Value! M60-S PA. Item ID 12062. Sam x702 E-Tech 160cc Smartdrive Firewood Processor - ThisMotor is a M60-S

ECU Controlled Performance

E-Tech 160cc Smartdrive Motor homemade processor with Ajustable Breaker Bara 10’

ECU Controlled Performance Direct Ajustable Breaker Bar log deck. Has a Drivetrain hydraulic grapple, Direct Drivetrain

chain and kicker that all runs off M60-S

amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702 M60-C

160cc Smartdrive Motor2004E-Tech Bandit Beast Model 4680 M60-C

ECU Controlled Performance

E-Tech 160cc Smartdrive Motor 3412ECU Caterpillar engine Dual Mode Diesel Cutting Door Controlled Performance

Direct Drivetrain Dual Mode Cutting Door with 850 HP. 5300 hrs. Mill in Direct Drivetrain

M60-CJust finished 10 good condition.

Phone: (405) 542-3520

160cc Smartdrive 160ccMercedes Smartdrivepower Motor AcreE-Tech clearing job, ready toMotor work! of aE4-Tech cylinder ECU Controlled Performance ECU Controlled Performance Phone: (405) 542-3520 Dougherty Forestry Mfg. 211 W. Canyon Run, Hinton, Remote control. Big production unit. Has a 4’ chain saw that kicks Dual Mode Cutting Door OK AjustableForestry Breaker Bar Dougherty Mfg. 211 W. Canyon Run, Hinton, OK

Direct Drivetrain

Lumbermens™  since 1986

❘

Direct Drivetrain

 List  seLL  exchange  buy  save

Phone: (405) 542-3520

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple. In-Cab Monitor

In-Cab Monitor RunsIn-Cab Great!. ItemMonitor ID 13740. Sam

x702

RealIn-Cab Time Rotor RPMs Monitor RealTime TimeRotor Pressure Real RPMs Temperature Real Time Pressure BELL Temperature

1990 Bell Super TMonitor - This Bell has In-Cab

In-Cab Monitor a brand new Duetz engine. Lever Real Time Rotor RPMs

control, 33” pump and tranny Realbar, Time Pressure Temperature

❘

 LumbermensCO.com

** CALENDAR** IntegrIty • PrecIsIon • QualIty • Value

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Woodmaster The Tree

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

that Started it All! See why we are your BeSt Source for bandsaw blades!

72ND ANNUAL GREAT LAKES offer the highest has quality welds and our people useLOGGING the SinceWe 1986, Lumbermens & HEAVY EQUIPMENT EXPO published a monthly circular and precision to give you the best Thurs, 7 Sept - Sat, 9 Sept highest level of integrity

reaching sawmills, loggers, Escanaba, Michigan blades inand the business—we ship all over the US. palletbandsaw makers, recyclers industrial woodworking plants always guaranteed! Satisfaction MID-ATLANTIC Item LOGGING ID: 13995 & BIOMASS worldwide.

Wood-Mizer LT40

Fri, 15 Sept - Sat, 16 Sept Contact: Austin

PUBLISHER

Woods Publishing

thIn Kerf

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Selma, North Carolinax703 Ph: (888) 401-6367 www.midatlantic-logging-biomass expo.com/

Band saw Blades

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Ask About Our Dismanteling Blades

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

1-888-857-5153

ck REPS • Cheut EQUIPMENT Quality O Our Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Our Service • Our Price

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

‘06 Western Star May be sent to morris@lumbermens.co Michigan Special POSTMASTER Item 14011 SendID: address changes to: Contact: Austin Lumberman's Exchange Ph: (888) P.O.401-6367 Box 1916x703

‘89 Timberjack 380A Item ID: 14039 Contact: Austin Ph: (888) 401-6367 x703

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Cambridge, Ohio www.ohioforest.org

B & B Mfg. ............................... 18 B. H. Payne .............................. 16 Baker ...................................... 5, 7

‘08 John Deere CT332 Brute Force Mfg. ..................... 31

Bell's Machining ..................... 27

ItemEquipment ID: 13855(AIM) ........ 36 Buck Contact: Sam Ph: (888) 401-6367 x702

13799. Sam x702 M&F Gauge ............................. 28 1998 Hydro Ax 611EX Saw Head Meadows Mill, Inc. ................ 33 Feller Buncher - with about 8800 Menominee SawSaw ..................... hours. Bunching Head has 29

Metal Detector's Inc. ..............and 30 large pocket for accumulation

lifting sideSharpening shield for notching Midwest .............. 26 larger trees before felling. Morbark ..................................... 9

Columbia, TN 38402

CRD Metalworks .................... 25

The Lumberman's Exchange is x702 published monthly by Woods 2004 Hydro AxBox 4701916, - This cutter Publishing, P.O. Columbia, TN7000 38402. All rights has around hours. It’s a clean reserved. All editorial/ advertorial and tight machine. submissions are used Only at the reason discretion thetopublisher and may selling is of due an upgrade. Item be edited for purposes of clarity ID 13846. Sam x702 and space. Although all efforts have been to ensure 2004made Hydro Ax 670accuracy - Engineofhas content submitted by advertisers about 500 hours, new saw motor and writers, the Lumberman's Exchange, its principles and owner and disc last year. Previous associates, are not held liable for had the hydrastatsReproduction, redone. This errors or omissions. inhas whole or part, is prohibited a 22” high capacity headwith and is out written consent. a very clean machine. Mounted on ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17 HydroAx 611B - New injectors,

Cummins engine. 28L tires at 60%. Multitek ................................... 12 Decent running condition. Item ID Piper's Saw Shop.................... 13 13245. Sam x702 Rotochopper ............................ 2002 Hydro Ax 621E - Arouund 40

engine. Rebuilt hydraulic pump 35 Dyna Products ........................ and new teeth. Item ID 13768. Sam Empire Hydraulics ................... 8 x702 Great Lakes Mfg. .................... 34 1999 Hydroax 511EX - New Hahn Machinery ...................... cummins engine with only 1500 3

Working daily. Item .................. ID 13884. 11 Sawmill Exchange Austin x703 Select Sawmill ......................... 19 1998 711EX Saw Head Feller Smith Sawmill ........................... 4 Buncher - 30.5-32 tires at 40%; The Paul Bunyan Show1500 ......... 39 Cummins Engine rebuilt

34’s with 50% tread. Item ID 13828.

Corley Mfg .............................. 32

CW Mill-Hogzilla injector pump. New ................... 5.9 cummins15

HurstCaterpillar Boiler ............................. hours. just replaced 3-5 14

gear hydraulics at the end21 Ironbox Bullto...................................

of summer. 11000 hours total on 22 Kilgore Saw ............................. cutter. Tires are 28L’s @ 80%, 2 Lignomat ................................. 24 @ 40% and one slick. Brand new

Thomas Industrial Controls ..... 10 hours ago; 8750 hours; Quadco

22” Large tree Saw saw head. Heat Union Grove & Knife .. 2,and 37 A/C work. New bearings in saw. Universal Refiner ................... 23

Cutting trees today. Item ID 13353. WoodMizer ................................ l Sam x702

KMC center section. 20” single post ❘ l§  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT 0 KMC Track Skidder 2500P head. Heat and air work. Item ID

- USED FORESTRY EQUIPMENT FOR SALE

Sam x702

Row ............................ 12,000Electric hours on this machine. 20

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

84/85 John Deere feed deck 20 foot out feed deck 440B/C with 44 inch wheels, and all the

Item ID: 13908 bells and whistles, its a production Contact: Sam machine, with air strain conveyers Ph: (888) 401-6367 x702

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set ‘90 Bell Super T

works,1 or 2" band, 22ft. track Item ID:1/2" 13896 Cat 3406 140KW Contact: Sam Genset, 12,400 Ph: (888) 401-6367 x702 hours ready to run. Item ID 13434. Sam x702

CARRIAGES DRIVES John Deere Dual Arch&Grapple, 2010 Cardinal HD Carriage John Deere winch, Model 4000,

CarriagesEngine, (Sawmill) - Cardinal Cummins Model 6BTA, Carriage line it includes carriage Clark Transmission 28000. Item ID

with Austin onboard log turners, carriage 13738. x703 drive, hydKOMATSU pac for carriage, sawyers cab,PC220LC computerw/2009 controls, 2007 Komatsu cabinet with electronic drives for Log Max 7000XT processing head. carriage husk7200 including 9700 hoursknees, on carrier. hours 48" bottom saw and 36" topCab saw on Log Max. Excavator style.

guard. Flotation pads. One owner.

STACKING RAC

Very good condition. Item ID 13464. Sam x702

2008 Komatsu D61-EX Dozer

- Great Condition. 4511 Hours.

Komatsu U/C at 95%. 35% Pads. 6

Way Blade. Fully Enclosed comfort cab. Great price!. Item ID 13570. Sam x702

2012 Komatsu D61EX 15 Dozer with only 750 Hours. Triple

Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; Undercarriage at 90%; Excellent www.BakerProducts.net Condition!. Item ID 13459. Sam 800.S48.6914 I S73.663.7711

x702 ❘ L!  (888) 401-MENS NO. 17 2014 Komatsu 450 - Only 1100

Phone 315.284.4126 Faxning condition. Owner just 2011 LIEBHERR A904 315.849.2045 RUBBER TIRED LOG HANDLER spent $30,000 on upgrading Website Liebherr 4 cylinder enginewww.empirehyd.com with delimber. Email Item ID 12992. Sam x702 great fuelUnder economy. “Precision Pressure” 11,230 info@empirehyd.com

hours. Fixed cab riser. Two section boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13477. Sam x702 2011 LIEBHERR A924 RUBBER TIRED LOG HANDLER Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13478. Sam x702

MORBARK

1987 MORBARK 27 WCL NEEDS MOTOR Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -with outboard bearing, Had Cummins KTTA 750 HP engine needs repower. Item ID 12443. Sam x702 1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All ﬂuids and ﬁlters have been changed. Item ID 13429. Sam x702

13428 Victory Ln. 3400 // PO- Box 124 1999 MORBARK 1400 1997 LINKBELT TUB GRINDER Adams Center,STROKE NY 13606 REBUILT PIERCE

DELIMBER 36” Pads on 60% undercarriage. 5221 hours. Good run-

Loader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702

2006 MORBARK 6600 HORIZONTAL GRINDER Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” Hammermill; ‘16 Halverson variable speed infeedH140 system; Hammermill includes Skidsteerdrive (DEMO) all belts, bushings & Item ID:sheaves, JW-909632 shields. Engine gauge panel Contact: J Williams &Ph:emergency shut down (888) 401-6367 x701 system located in an anti-theft console. Electronic rpm sensor & auto feed system. 430 Gallon fuel tank. 238 Gallon hydraulic oil tank. IQAN control system. Dust suppression system. Hyd operated debris containment door. 16 Function radio remote. Super package! Optional new knife skin - $20,000 which is half price new. 2500 Track ‘13ofKMC Item ID 12692. Sam x702

Skidder

MORBARK 1200 TUB GRINDER Item ID: 14078 Powered a 3412 Cat engine, Contact:byAustin 600-hp. tub. Hours Ph: (888)Tilt 401-6367 x703 are unknown. Please call Daren at Ext. 702 for more details. offItem onto aIDconveyor. a very 12919. This Samisx702

well built processor. Item ID 13820. Sam x702

All Sizes Available! Firewood Processor - This is

BANDSAW

TOP PERFORMING, economical blades for all primary 16 & PDA a Chomper Model

BLADES

wood processing. Welded to your lengths! ‘05 Gehl CTLsecondary 70 automatice processor We also offer expert sharpening services,firewood plus...

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

Gang • Edger • Scragg • Trim • Split • Strob Item ID: JW-986495 with John Deere power unit with Saws you need Contact: J Williams ....and just about any Custom low longer... hours. Control panel includes to keep you cutting Ph: (888) 401-6367 x701 for less. Ask about FREE Shipping!

tach, oil pressure, water temp and

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Samforx702 Best Value Portable Log Splitter Call Marvin Miller a quote

made the best valued log splitter.

BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

WOLVERINE

1995 MORBARK WOLVERINE 3-WHEELED FELLER BUNCHER S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires ‘93 Barko 180B atItem 50%. ID: 16” 14077 Rapid Buncher shear head. Machine is fast and in very Contact: Austin good Ph:conditi (888) on. 401-6367 x703 Item ID 12531. Sam x702 PRENTICE 1988 PRENTICE 210B New battery and starter a year ago, new alternator less than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a ‘95 John Deere C6 1978 GMC Brigadier with 6-71 detroit with a 10 speed. Tree Farmer Runs everyday. Item ID: 13920 Item ID 13703. Contact: AustinSam x702

Ph: (888) 401-6367 x703 1992 PRENTICE 210D LOADER Excellent condition, very tight loader mounted on a 1989 capacity!. Item ID 13421. Sam x702 Mack truck with very good BARKO tires. 1994 Barko 160B - Electric Item ID 13654. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

ROW ELECTRICAL EQUIPMENT, INC.

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks. Item ID 13694. Sam x702

Has Log Lift. Uses 4-way wedge Diesel. 7500USED, Hours. One owner. 94 Barko 275 - Excellent value YOUR SOURCE FOR RECONDITIONED: adjustable to single twoMotors way. Great• • Squirrel Cage Gear Motors Value!•PA. Item ID 12062. Sam x702• • Wound-Rotor Motors • Firewood Processor - This is a • Synchronous Motors • homemade processor with a 10’ • • DC Motors log deck. Has a hydraulic grapple,

maintained. 13294. with low Three-Phase at hours at 3,500. 5.9 DCWell Motors - CraneItem and ID Mill • Transformers, Adjustable • Across/Line Magnetic Starters Sam x702 Speed Drives CUMMINS continuous grapple. Generators - AC and DC • Reduced Voltage Starters 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam Engine-Generator Sets • Safety Switches 3412 Caterpillar Diesel engine • Phasex702 Transformers, Single Phase Convertors with 850 HP. 5300 hrs. Mill in BELL

Fax to : kicker WWW.RoWELECTRiCAL.CoM chain and that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has 800-248-4479 P.O. Box 2812 • Toledo, Ohio 43606

Acre clearing job, ready to work! 419-248-4479 a brand new Duetz engine. Lever of a 4 cylinder Mercedes power 419-244-8887 rowelec@glasscity.net sales@rowelectrical.com

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL

 Issue 364 410

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

30+ Years Strong!

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES

From PriceLOGGING To & HEAVY EQUIPMENT EXPO Performance, Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan We’re A Cord Above The Rest!

Since 1986, Lumbermens has NEW published a Saw monthly circular Auto reaching sawmills, loggers, Tensioner pallet makers, recyclers and industrial woodworking plants worldwide.

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS  Firewood Processors: 8 Models  Firewood Cleaners Fri, 15 Sept - Sat, 16 Sept PUBLISHER

it includes two sets of Mcdonough

pressure guides. Top Casting wheel Item

Selma, North Carolina

Woods Publishing  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs www.midatlantic-logging-biomass MID-ATLANTIC ADVERTISING SALES& Log Grapples expo.com/  Firewood  Free DVD Morris Woods

is supported on both sides. This is an extremely accurate machine

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 morris@lumbermens.co

John Williams (888) 401-6367 ext. 701 Portable • DePenDable j@lumbermens.co

• low Maintenance

DESIGN DIRECTOR 888-SPLITTER (888-775-4883) Donna Heninger

319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA

blockbuster-inc.com

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 100 sam@lumbermens.co WWW.TREETRADER.COM

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 Industry ~ The World’s Largest Website For The Tree & Landscape

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Innovative

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Clean-Burn Design

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

‘10 Shop Built

Baker ...................................... 5, 7 Menominee Saw ..................... 29 Processor Manufacturing a full line of biomass ﬁWood red Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 combustion systems backed with ﬁfty years of Item ID: 13916 innovative clean-burn design. Diverse every Brute Force Mfg. ..................... 31 in Midwest Sharpening Contact: Austin .............. 26 way with multi-fuel blending capability. Hurst Ph: (888) 401-6367 x703 Buck Equipment 36 Mor stokers utilize (AIM) hundreds........ of common andbark ..................................... 9 abundant solid biomass fuels. Corley Mfg .............................. 32 Multitek ................................... 12 Large or small scale, project Skidder VeryShop good.................... running 13 Piper's Saw CRD Metalworks .................... 25 management is eased with the condition. Big Capacity Grapple!40 impressively .............. short installation time ............................ CW Mill-ArmorHog 17 Rotochopper required with prefabricated 9400 hours. Tires at 40%. Totally CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 modular components. gone through by TP Dealer who Dyna Products ........................ 35 Sawmill Exchange .................. 11 did the following: Repacked and Empire Hydraulics ................... 8 Select Sawmill ......................... resealed hydraulic cylinders – 19 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Rotary Dryers Hurst Boiler ............................. 14 Sand Dryers GrainBull Dryers Iron ................................... 21 Lumber Kilns KilgoreKilns Saw ............................. 22 Cement Brick Kilns Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

grappleSawmill arch, steering; Replaced 4 Smith ...........................

hydraulic hoses andShow lines ......... where39 The Paul Bunyan needed – fill pump, grapple, etc; Thomas Industrial Controls..... 10 Repacked hydraulic fill pump; Union Grove Saw & Knife.. 2, 37 Replaced exhaust; Replaced center Universal Refinerand ................... pins; Straightened painted 23

WoodMizer ................................ panels; Changed all fluids and l filters; Re-insulated cab; Checked

❘

and fixed wiring as needed. Item  SELL YOUR EQUIPMENT ❘  24/7 SUPPORT l§ TODAY 0  Issue 364

Con Ph:

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

‘05

‘99 51

Item Con Ph:

Carriage line it includes carriage

Runs

‘98 611 Ex-Hydro sawyers cab, computer controls, Ax

main

with onboard log turners, carriage shifts at 13, drive, hyd pac for carriage, cabinet with electronic drives for

Item ID: 13948 carriage knees, husk including Contact: Austin 48" bottom saw and 36" top saw Ph: (888) 401-6367 x703

STACKING RAC

ID 13438. Sam x702

2007 TimberPro 810 Combi

Machine - Forwarder set up but

comes with rebuilt Log Max 750 processing head. Less than 5200

total hours. Runs very well. Has blade and plumbed for a clam

bunk. New swing gear box. Quick

attach in 15 min. to switch head to

grapple. Cummins 6.7 QSB engine.

260HP. Optional Tracks on all

bogies adds $10,000. Item ID 13501. Samwww.BakerProducts.net x702 800.S48.6914YEARS I S73.663.7711 2010 TimberPro 725B w/Rolly II

Processor - Super Clean Machine. ❘ L!  (888) 401-MENS NO. 19

Lumbermens  since 1986

❘

24” g year.

hydr

Rolly

comp

retiri Item 2006

Harv

hours with

and L

for ha

bogie

from man

top sa new

13439

 List  seLL  exch

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

SAFETY ALERT

Chaser Crushed Between Two Logs “Precision Under Pressure”

BACKGROUND: On a September day in the Paciﬁc Northwest, a 31-year-old chaser died after he was crushed between two logs while working on the landing of a cable logging operation.

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

PERSONAL CHARACTERISTICS: • The chaser who was involved had worked in the logging industry for over six years. • The yarder engineer had over 40 years of experience in the logging industry. • All loggers were wearing personal protective equipment.

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

13428 Victory Ln. // PO Box 124 AdamsACTS Center, NY 13606 UNSAFE AND CONDITIONS:

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

The yarder engineer brought in a turn of four logs held by three chokers with two short-end singles and 1994 Barko 160B - Electric one long-end bonus. As soon as the logs hit the landing,offthe chaser moved to unbell them. 30' boom, 75hp onto a conveyor. This isina very knuckleboom, He did not make eye contact with the engineer or wait make sureItem theIDlogs going to stay in place. well to built processor. 13820.were motor, Rotobec continuous He stepped in between the two logs choked together (“bonus”). Sam x702 grapple, 5,000 original hours. Firewood Processor - This is

(excellent condition.). Item ID

tach, oil pressure, water temp and

good. in good working order. 22in

One owner and comes with all

Item ID 13185. Sam x702

a Chomper Model 16 PDA 13238. Chris x700 ACCIDENT: ‘05 Gehl CTL 70 automatice firewood processor Barko B Feller Buncher As the chaser attempted to unhook the two logs, one of the short-end single choked1995 logs slid775back downhill. Item ID: JW-986495 with John Deere power unit with - Pumps recently redone. 400 hrs The movement of this log caused all the chokers to tighten up, which lifted the logs oﬀ the ground. The two Contact: J Williams low hours. Control panel includes on injection pump. always started logs the chaser was standingPh: between came together, crushing the upper part of his body. (888) 401-6367 x701

‘83 John Deere 4850 INJURY:

Item ID: 14073 The chaser died at Contact: Austin Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on

the scene. 20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”. manuals and receipts. Purchased new for $32,500. Item ID 13865.

kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour

RECOMMENDATIONSBest Value Portable Log Splitter Sam x702 meter dont work. The last 2 owners • The must secure inbefore by employeeshave andonly before areor with 1700 hours,logs in very good be stable - Smalland manufacturer PA has being approached LOGGING EQUIPMENT used it chokers to load trucks condition. Easily produces high made the best valued log splitter. BANDIT as a backup as needed. Has a CTR unhooked. quality•chips Handleschokers logs up to 32”. Uses Bandit 1900contact Tracked Disc has been Do with not patented move ‘Cone’ in to unhook until you have1999 made eye with the delimber, yarder grapple engineer andrebuilt. the drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper Cat Under Carriage at Boom cylinders have minor leaks. engineer gives clear instructions that it is safe to do so. vans and produce 6 - 8 loads per but electronic option is available. 50% or better. 475 hp Cummins Item ID 13694. Sam x702 • Never put yourself between two logs that are choked together. day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Diesel. 7500 Hours. One owner. 94 Barko 275 - Excellent value • If a turn is unstable, stay in the clear and signal a machine operator to reposition the unstable log(s). EDGERS & GANGS adjustable to single two way. Great Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 • When working on shorter landing, keep all ends of the choked logs as evenCUMMINS as possible to assist in Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Sam x702 continuous grapple. landing turns better. in excellent condition. Runs great. Firewood Processor - This is a 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam Address short landinghomemade issues in pre-job meetings. Make sure rigging and Item ID• 13644. Sam x702 processor withsafety a 10’ 3412 Caterpillar Diesel engine x702 landing crews are in communication when there is something with speciﬁBELL c turns. FIREWOOD PROCESSORS withlogeach deck. other Has a hydraulic grapple, with 850 HP.out 5300of hrs.the Millordinary in 2010 Shop Builtexample: Wood Processor kicker problems that all runs off good condition. finished landing, 10 1990 Super T -bonus This Bellwith has • For If there chain are and already landing turns on aJust “short” a Bell long-end - It has a 353two Detroit diesel, 40 Acre clearing job, ready to work! a brand new Duetz engine. Lever of a 4 cylinder Mercedes power short-end singles would be something you should communicate to the landing crew about before inch insert tooth circle saw, foot Remote control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks sending the 30turn.  Issue 364 410

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

SHRINK WRAP

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

FIREWOOD/WASTEWOOD

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

PUBLISHER

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

LUMBERMEN’S

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

Double or triple your profits by shrink wrapping MID-ATLANTIC LOGGING & BIOMASS Item ID: 13940 it includes two sets of Mcdonough Fri, 440D 15 Sept - Sat, 16 Sept wastewood - firewood with WOOD-PAKER! Contact: AustinTop Casting wheel Item# 13781 pressure guides. Selma, North Carolina Attractive various size packages can be obtained Ph: (888) 401-6367 x703 Contact: Sam www.midatlantic-logging-biomass is supported on both sides. with our high production, easily operated and This Ph: (888) 401-6367 x702 expo.com/ is an extremely accurate machine affordable machines. Eight machines available. in ve1y good condition, Cuts The ideal equipment for producing square bundles130 KENTUCKY WOOD EXPO feet a minute also has CLT presses. palletizable ease in storage and transporting. Fri, 15 Sept - Sat, 16for Sept Item ID 13876. Austin x703 Lexington, Kentucky Inquire for free details. generator - Low hours Columbia,Caterpillar TN 38402-1146 1-800-477-7606 Faxon(931) 388-3564 the mill, electronic computer Set THE PAUL BUNYAN SHOW www.lumbermenonline.com works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct

716-373-5881 Trelan Chipper

Equipment Digest

ID:140KW 13866Genset, 12,400 E-mail: bbmfg@verizon.net • Web:Item www.thewoodpaker.com Cat 3406 Cambridge, Ohio Contact: Sam www.ohioforest.org hours ready to run. Item ID 13434. Ph: (888) 401-6367 x702

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Sam x702

** Them INFO LINK** PROTECT ALL 58” Precision ® Wrap With Pro-Tec-ToChipper

CARRIAGES & DRIVES

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

bells and whistles, its a production

Digest http://www.kfia.org/ LUMBERMEN’S SEquipment & W 125 Band Mill with Box• 1146 B & B Manufacturing • 3007 West River PO Road Olean, NY 14760 KentuckyWoodExpo.aspx

Donna Heninger

MAILING ADDRESS

feed deck 20 foot out feed deck with 44 inch wheels, and all the

‘04 Woodmizer machine, with strain conveyers Sell Your WOOD – $300/cord orairMore! LT70 Hydraulic 1988 John Deere that go up and down, with airbags,

Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

Danckaert Band Resaw - Roughly

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Item ID: Mill, 13975 Meadows Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Contact: Austin Ph: (888) 401-6367 x703

‘88 John Deere 440D27– Metal May be sent to ‘94 Caterpillar Hydraulic Lines – Fuel Hoses Air Detector's Lines Inc. .............. 30 Bell's Machining ..................... morris@lumbermens.co Skidder 320 BruteBundles Force Mfg. ..................... 31 Midwest Sharpening .............. 26 Electric Wire – Control Cables Reman Cummins Engine. POSTMASTER Item ID: 13781 Item 13936changes to: Buck Equipment bark ..................................... SendID: address Equipped with 18” Waratah High9 Contact: Sam (AIM) ........ 36 Mor Contact: AustinExchange Lumberman's Speed Disc Saw. 28L x 26 Tires at12 Ph: (888) 401-6367 x702 Corley Mfg .............................. 32® Multitek ................................... Ph: (888) x703 ® P.O.401-6367 Box 1916 PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE

40% complete with chains. This Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 CUT YOUR inDOWNTIME AND YOUR COSTS! very good shape and has been machine has been extremely well The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 4000 hours. Torque maintained. Item ID 12194. and runs very well. Protection Pinching, Crushing, Rubbingmaintained & Abrasion published monthly byconvertor Woods Againstwell CWx702 Mill-Hogzilla ................... 15 Row ............................ Publishing, P.O.14 Box 1916, transmission. hole wheels. Tires Sam Hard Electric to find them in this good 20

– EVEN UV RAYS! Both are Impervious to Oils and Solvents.

Columbia, TN 38402. All rights Dyna Products ........................ Exchange .................. are 30.5’sAll at editorial/ 55% and advertorial one at 80%. ‘98 Timberjack 1270B - 7,300 hrs. 35 Sawmill of condition. Has a twin that is 11 reserved. submissions are used atslack. the This Provides Maximum Protection for Logging, Center has very little Perkins 6 Cylinder Engine. All available if you need two units. 19 For The Distributor Empire Hydraulics ................... 8 Select Sawmill ......................... discretion Construction of the publisher&and may Stationary Applications Like: Nearest You, Call skidder been a back up skidder modules and computer are brand Item ID 12524. Sam x702 be edited has for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Although Debarker Buggies Pantograph ArmsTires • Forklift Masts are around and all efforts• have for space. the several years. Skidder has new. on average 2005 Valmet 860.1 8-Wheeled Hahn MachineryLoaders ...................... 3 The Paul Bunyan Show ......... 39 been made• Wheel to ensure accuracy of Loaders • Skidder Grapples • Knuckleboom orhours. Visit New 12000 hours. Item ID 13805. Sam 80% Video: http://youtu.be/R_ Forwarder - 17,800 content submitted by advertisers • Fellerbuncher Heads • Harvesting Heads • Stroke Hurst Boiler ............................. 14 Thomas Industrial Controls ..... 10 www.pro-tec-toproducts.com and writers, the Lumberman's x702 MQZe5QEFw. Item ID 13572. Chris hydraulic transmission and gear Delimbers • Dozer Blades Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & .. 2,in 37 1981 Timberjack 520 - Very hard to x700 box in 2013. $70,000 ofKnife updates associates,Anywhere are not heldHoses liable for & Wires Are – Pro-Tec-To® Products OEM’s, Repair Facilities & comeor by! 653 Detroit. Runs Protection, Great!. 2012. BogiesRefiner just resealed. Spare 23 errors omissions. Reproduction, Kilgore SawVALMET ............................. 22 Distributor Universal ................... Offers Maximum Lower Costs, Reduced Inquires Welcome in whole or part, is prohibited with 1998 Valmet 603 3-Wheeled Item ID 13741. Sam x702 pump ($7,000 value) Good running Downtime and Less Spills! Lignomat ................................. 24 WoodMizer ................................ l out written consent. Buncher - 6500 hours on total 2002 Timberjack 608s with hot saw condition. Sisu engine uses 4 gal/ ©2017 Woods Publishing

800-355-1250

Mud Tracks. Front blade. Hood 2010 Cardinal HD Carriage guard. Item ID 12267. Sam x702 Carriages (Sawmill) - Cardinal 2005 Valmet 941 Harvester - Totally Carriage line it includes carriage refurbished head to toe! Very good with onboard log turners, carriage running condition. Over $50,000 in drive, hyd pac for carriage, recent updates and maintenance. sawyers cab, computer controls, New center pin bushings; new cabinet with electronic drives for bogey seals; valves resealed; all carriage knees, husk including cylinders packed. 10,200 hours. 48" bottom saw and 36" top saw Largest of rubber tired harvesters. Has Valmet 370.2 processing head

STACKING RAC

with less than 4000 hours. Engine runs well. Tires at 50%. This is a

hard to find gem and priced below market. Item ID 12569. Sam x702

2005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours.

370E Harvesting head just added in 2010 and has 7000 hours. 36”

Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu

engine that is very stingy on fuel. 8’ squirt at end of boom for 30’

reach. Reversible fan and auxiliary www.BakerProducts.net 800.S48.6914 I S73.663.7711 oil cooler. Still runs OK. Cutting

machine but no hours on 4BT3.9 - Approx. 6000 hours, Machine is hour. 16 ton capacity. One set of today but will needs some basic  SELL YOUR EQUIPMENT TODAY ❘  24/7 SUPPORT ❘ L!  (888) 401-MENS NO. 21 - USED FORESTRY EQUIPMENT FOR SALE ❘ l§ 0  Issue 364

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Bandit Industries purchases “Precision Under Pressure” The Trelan Company

IN THE NEWS

Bandit Industries is pleased to announce that they have purchased The Trelan Company. Bandit purchased the assets and properties of Trelan from the Schumacher family on December 22nd, 2021. Bandit will continue to produce the Trelan products and market them as Trelan machines produced by Bandit. Like the Bandit products, the Trelan chippers are known for their quality, performance, and dependability. Bandit will also supply parts and service to Trelan customers. Trelan has a long strong history in the whole tree chipper arena. The first Trelan chippers were produced in the early 70’s. Trelan’s unique chippers will enhance Bandit's extensive line of whole tree chippers. The Trelan chippers will add volume without affecting the sale of Bandit's line of whole tree chippers. Bandit will use the 45,000 square foot manufacturing and 10,000 square feet of storage buildings to continue to produce the Trelan machines and to produce additional Bandit machines. Because of the strong demand for Bandit products, Bandit is on a major expansion campaign. Three expansions of Bandit plants were completed inLn. 2021 13428 Victory //and PO two Box other 124 expansions will be completed in the fiAdams rst quarter of 2022. Three Center, NY 13606 additional facilities will be built in 2022. Total capital expenditures for 2022 will be $16,500,000.00. Bandit now employs 610 people. Up from 450 employees in 2020. Bandit has 110 job openings and hope to increase employment to 800 employees by the end of 2022.

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

‘05 Gehl CTL 70

Item ID: JW-986495 Traditional Quality Combined Contact: J Williams With Todays Technology Ph: (888) 401-6367 x701

‘83 John Deere Call 800 752-0627 Circular Saws 4850 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Quality Brand Reg. U.S. Pat Off

chain conveyer, 8 way splitter, on Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Item ID: 14073 Carbide Tipped Saws 20,000lb goose neck trailer. Item ID Contact: Austin Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also AustinTips, x703 Payne 401-6367 & Company Stock Ph:B.H. (888) x703 & Sell Bits & 13916. Shanks, Carbide Diamond Wheels, Saw Manufacturers Knife Grinding Wheels, Gumming Wheels & Knives. BestSaw Value Portable Log Splitter

withHere’s 1700 hours, in very - Small in PA has What You Get good With Every B.H. Paynemanufacturer Saw

condition. Easily produces madeQuality the best valued logSteel. splitter. • Saws manufactured fromhigh only the Highest Nickel Alloy

Working together to Strengthen U.S. Softwoods in Mexico

180B In early November, Fernanda ‘93 Vale Barko and Gabriela Sandoval ‘16 Halverson H140 of American Softwoods Mexico traveled to Guadalajara, Jalisco, Item ID: 14077 Contact: Austin Mexico for three days of meetings and events to benefi t American Skidsteer (DEMO) Softwoods’ program in Mexico Ph: and (888) Latin401-6367 America.x703 Taking Item ID: JW-909632 the time to meet with lumber and panel distributors provided Contact: J Williams valuable andx701 information regarding different market Ph: (888)insight 401-6367 needs, and created opportunities to showcase U.S.-engineered wood products, including Southern Yellow Pine (SYP). “It was incredible to connect directly with SYP importers and distributors. It gave us an opportunity to better understand their unique needs and goals regarding American Softwoods,” explained Fernanda Vale. “We took the opportunity to create ‘95usJohn Deere C6 short video recordings that will help promote U.S. wood products and SYP to new global market segments.” Tree Farmer Vale and Sandoval first visited Maderas Mi, Maderas La Item ID:La 13920 Mision’s primary clients are furniture manufacturers, Contact: Austin who have ‘13 KMC 2500 Track Ph: (888) 401-6367 x703put adopted SYP recently, after a lack of lumber in the market Skidder a strain on production. SYP’s versatility makes it an excellent Item ID: choice for14078 both furniture and indoor applications. Next, Vale Contact: Austin capacity!. Item ID 13421. Samthat x702 and Sandoval met with FICAMEX, a lumber distributor Ph: (888) 401-6367 x703 BARKO builds with U.S. lumber. FICAMEX also works with furniture manufacturers and builders. They1994 visited construction Barkoseveral 160B - Electric sites to explore how SYP is being used in housing and commercial off onto a conveyor. This is a very knuckleboom, 30' boom, 75hp builds in Mexico. well built processor. Item ID 13820. motor, Rotobec continuous Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

approximately 1500 hours. Hour

Sam x702

LOGGING EQUIPMENT BANDIT

Diesel. 7500 Hours. One owner.

B.H.EDGERS Payne &&Company, GANGS Inc.

P.O. Box 90608 Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great. 404 761-8711 Item ID 13644. Sam x702 Fax 404 761-5398

FIREWOOD PROCESSORS

2010“Since Shop Built Wood Processor 1890” - It has a 353 Detroit diesel, 40

inchE-mail: insert tooth circle saw, 30 foot info@paynesaws.com  Issue 364 410

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. 4’ chain saw that kicks WebHas Site:a www.paynesaws.com

Lumbermens™  since 1986

❘

on injection pump. always started

14’ Pusher good.Snow in good working order. 22in

Ph:for (888) 401-6367 new $32,500. Item IDx701 13865.

manuals andJreceipts. Purchased Williams Contact:

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

- Pumps recently redone. 400 hrs

One owner and comes with all Item ID: JW-113876

1999 Bandit 1900 Tracked Disc

but electronic option is available.

1995 Barko 775 B Feller Buncher

Item JW-492406 kohingID: head. head works great. Contact: J Williams Item ID 13185. Sam x702 Ph: (888) 401-6367 x701

‘11 Doosan DL200

amp gauges. Cuts logs up to 16”.

• Each Sawwith Milled with State-Of-The-Art Precision Milling Machine. quality chips patented ‘Cone’ Handles logsCNC up to 32”. Uses • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. drum design. Can easily load 42’ 13HP Honda motor. Manual start • Your Satisfaction - Completely Guaranteed. vans and produce 6 - 8 loads per

(excellent condition.). Item ID

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

‘05 Transport Sam x702 Trailers Custom 2004 Bandit Beast Model 4680 Log Pup

Well maintained. Item ID 13294.

3412 Caterpillar Diesel engine

Item ID: JW-538174 with 850 HP. 5300 hrs. Mill in Contact: J Williams good condition. Just finished Ph: (888) 401-6367 x701 10

Acre clearing job, ready to work!

Remote control. Big production Waratah 624 Super - New

Computer for head  List  seLL  exchange  (Logrite). buy  save 10500 hours. New main pump

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Ite Co Ph

Item ID 13694. Sam x702

‘04 Fabtek 344Bvalue 94 Barko 275 - Excellent

Item ID: JW-093430 with low at hours at 3,500. 5.9 Contact: J Williams CUMMINS continuous grapple. Ph: (888) 401-6367 x701

Runs Great!. Item ID 13740. Sam

x702 Processor - This is a Chomper

BELL

super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,

and ❘the chopper itself come with  LumbermensCO.com it, as well as all of the electrical

‘14 Lo

** CALENDAR**

IN THE NEWS

SHEER ANIMAL POWER

FOR CLASSIFIEDS Call 888.401.MENS CALENDAR OF EVENTS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS FEBRUARY Fri, 18 August - Sun, 20 August Location of all equipment at OREGON LOGGING www.LumberMB\ISmagazine.com CONFERENCE Boonville, New York

February 24- 26, 2022 • Eugene, OR www.starwebhosting.net/woodsmen/ How our grabs take inspiration MARCH BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO KENTUCKY FOREST ASSOCIATION ANNUAL MEETING from predatory beasts Band Fri, 25 August - Sat,March 26 August 29-31, 2022 Danckaert • Lexington, KY Resaw - Roughly

The Tree that Started it All!

Silage Sabre™ Power

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Hot Springs, Arkansas MAY10 hours on this machine since it www.arkloggers.com LOGGERS’ EXPO • May 6-7, 2022 • Essex Junction, has been rebuilt, it has a VT 24foot in EXPO RICHMOND • MAY 20-21, 2022 • Richmond, VA feed deck 20 foot out feed deck Claw 72ND ANNUAL GREAT LAKESSEPTEMBER with 44EQUIPMENT inch wheels, and all the LOGGING & HEAVY EXPO& HEAVY GREATEQUIPMENT LAKES LOGGING EXPO Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production September 9-11, 2022 • Escanaba, MI Escanaba,MID Michigan SOUTH FORESTRY EQUIPMENT SHOW machine, with air strain conveyers Starksville,that MSgo up and down, with airbags, MID-ATLANTIC LOGGING & BIOMASS OCTOBER it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept PAUL BUNYAN SHOW guides. Selma, North Carolina October 7-9, 2022 • pressure Cambridge, OHTop Casting wheel www.midatlantic-logging-biomass is supported on both sides. This expo.com/ is an extremely accurate machine in ve1y good condition, Cuts 130 Every Wide Band KENTUCKY WOODReputable EXPO feet a minute also has CLT presses. Fri, 15 Sept - Sat, 16 Sept Supplier Offers

MARKETING DIRECTOR

Item ID 13876. Austin x703 Lexington, Kentucky 3 High Quality Swedish Steel http://www.kfia.org/ S & W 125 Band Mill with 3 3” – 8” Band Width KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Caterpillar generator - Low hours

3 16 to 20 Gage on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW 3 Double Cut Options In Donna recentHeninger times the team at Rata have been considering Fri, 6 Oct - Sun, 8 Oct works,1 1/2" or 2" band, 22ft. track ‘06front Brewco B1600 3 Choice Stellite how our endREPS loader and telehandler attachments relate to 3406 140KW Genset, 12,400 Cambridge, Ohio of Swage or Cat EQUIPMENT

Resaw Sam Wall different animal characters. While the attachments are made (888) 401-6367 702 real likenesses that our attachments of steel, there areext. some Item ID: 13862 sam@lumbermens.co Contact: Sam represent with their ability to perform in their environment and Austin Woods Ph: (888) 401-6367 x702 dominate the food-chain. ‘05 Woodmizer (888) 401-6367 ext. 703 In the case of the Sabre Tooth Tiger (said "saber"), it's austin@lumbermens.co known for its distinctive pair of longLT300 canines that could grow MAILING ADDRESS Item ID: 14031 up to 200mm long and had a jaw that can up to over 120 B & B Mfgopen . ............................... 18 P.O. Box 1916 Contact: Austin degrees, thisTN is twice that of a modern cat. Columbia, 38402-1916 Ph: (888) 401-6367 x70316 B. H. Payne .............................. (888)extreme 401-6367 These features are well represented in Rata Silage Baker ...................................... 5, 7 Grabs.AD AsSUBMISSIONS many farmers throughout New Zealand would well May be sent to know how great these silage grabs areMachining for loading out silage Bell's ..................... 27 morris@lumbermens.co from the pit and many other tasks around the farm. The tines that Brute Force Mfg. ..................... 31 Rata usePOSTMASTER are super strong, representing the tiger’s teeth, which Buck Equipment (AIM) are ........not 36 Send it address changes to: permit to infl ict deep548G2 stabbing wounds. Rata products John Deere Lumberman's Exchange Corley 32 only designed to1916 perform, they are also Mfg built.............................. to perform to the Item 14042 P.O.ID: Box conditions thatTN the38402 use demands.CRD As for a wide opening jaw, Contact: Austin Columbia, Metalworks .................... 25 Ph:Rata (888)silage 401-6367 x703 only the grabs open to 180‘14 degrees giving the silage B66TD The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 grab themonthly leadingbyedge when it comes to a big kill! published Woods Rotochopper CW Mill-Hogzilla 15 - 3410P.O. hours. recent Publishing, Box $32,000 1916, While bear claws inare often described as being................... sharp, this Columbia, TN 38402. All rights Item ID: 13838 repairs.the Fecon is notupgrades actuallyandalways case, well notProducts sharp enough to have Dyna ........................ 35 reserved. All editorial/ advertorial Contact: Sam a shave with anyway. However, BH250 Mulching Head. Item ID they are sharp enough to grab submissions are used at the Empire (888)Hydraulics 401-6367 ................... Ext. 603 8 discretion the publisher may hold 13502. of of fish and otherand odd shaped or slippery items that are not Sam x702 be edited for purposes of clarity Great Lakes Mfg. .................... 34 so easy keep a620D grip-on. This 2011to Tigercat This is a is due in combination to the shape and space. Although all efforts have of the bear’s claw and the incredible inx702 the arms3 Hahn ...................... been made to ensure accuracy of ItemMachinery IDstrength 13408. Sam low hour skidder withalso only 5500 content submitted byall advertisers and the paws of species of bear. Hurst Boiler ............................. 2014 Tigercat 630D Grapple 14 hoursthe on Lumberman's a cummins engine and and writers, The Power Claw is the perfect fi t for a Rata grapple and while Exchange, its principles and - Dual Arch Grapple. 21 Just a fire suppression system. Comes IronSkidder Bull ................................... associates, for sharp, it’s the shape and power of the the tinesare arenotbyheld noliable means 1990 hours. 3 year/5000 hour PT mounted on 35.5 tires at 50% back errors or omissions. Reproduction, Kilgore Saw ............................. 22 geometry in which the hydraulic rams operate that give the Rata in whole or40% part,front is prohibited warranty. 35.5 tires with dualing and and goodwith chains on Power Claws the functionality and brute strength they need to pick Lignomat ................................. 24 out written consent. at 60%. Wide blade. Winch. all 4 tires. Has the bigger 630 axles up and hold a wide range of items and rings be used for many functions. ©2017 Woods Publishing

www.ohioforest.org

WOLVERINE

** INFO LINK**

234B. Only 300 hours on this

2010 Cardinal HD Carriage

• Cutting Edge Plasma Welds Carriages (Sawmill) - Cardinal • The Industry’s HighestCarriage Band Saw line it Capacity includes carriage M&F Gauge ............................. 28 withHUGE onboard log turners, carriage • Quick Delivery from our Inventory Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, • Fast Sharpening & Exchange Program Menominee Saw ..................... 29 sawyers cab, computer controls, to Keep YOU Running cabinet with electronic drives for Metal Detector's Inc. .............. 30 • Competitive Pricing carriage knees, husk including Midwest Sharpening.............. 26

48" bottom and 36" top saw Gives Yousaw Everything You need in a 12 Wide Band Saw – Plus Multitek ................................... Expert Service from the Industry’s Most Piper's Saw Shop.................... 13 Knowledgeable Staff.

And ONLY Menominee Morbark ..................................... 9

Rotochopper............................ 40

Got a Wide Row Electric ............................ 20

STACKING RAC

Band Problem? Call Menominee Saw Today and You’ll Sawmill Exchange .................. 11 Learn Why More Mills Trust the Pro!

Select Sawmill ......................... 19

TOLL FREE 1-800-582-0470 Thomas Industrial Controls..... 10

Smith Sawmill ........................... 4

The Paul Bunyan Show ......... 39

900&16th Menominee, MI Union Grove Saw KnifeSt., .. 2, 37

49858 Tel: 906-863-2609 Fax: 906-863-1147 Universal Refiner ................... 23 Email: info@menomineesaw.com WoodMizer ................................ l

www.BakerProducts.net

WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711

and no winch. Center pins are tight Item ID 13526. Sam x702 FORESTRY FOR SALE2015❘ Tigercat  SELL YOUR EQUIPMENT ❘ the0 grapple 24/7 SUPPORT - USED l§ TODAY roatation on w/ a 234B Loader - Model and extra fuel EQUIPMENT tank. Item ID 13929. Sam x702

hours ready to run. Item ID 13434.

BUT ONLY THE Sam x702 CARRIAGES & DRIVES BY MENOMINEE SAW GUARANTEES

30’ reach on the boom. Joystick

❘ 2006  Tigercat L! (888) 401-MENS 630C Grapple NO. 23 Skidder - Very good running

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Turney Gang Edger Combo

Ligna Gang Saw

‘95 John Item ID:Deere 100110 C6 Tree Farmer

Item ID: 100111

8 inches Ligna gang saw (8in by 48in) with infeed and outfeed, electrical motor, control operations cab with it. Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 13428OR Victory Ln. // PO 801-362-2170

13’ John Deere 643K Item ID: 100115

Contact: AUSTIN Email: Austin@lumbermensco.com Box 124Phone: 888-401-6367 EXT 703 931-797-8029

Adams Center, NY 13606

Timberjack ‘13 KMC 2500450 Track Item ID: 100112 Skidder

Contact: JOE Email: ItemJoe@lumbermensco.com ID: 14078 Phone: 888-401-6367 EXT 709 Contact:OR Austin 801-362-2170

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

B U Y S

Sam x702

2010 Pallet Chief 4 Item ID: 100105

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

H O T

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Timberjack 460

with 1700 Item hours,ID: in 100049 very good

Contact:Easily AUSTIN condition. produces high Email: Austin@lumbermensco.com quality chips with patented Phone: 888-401-6367 EXT‘Cone’ 703 OR 931-797-8029 drum design. Can easily load 42’

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

96’ Cat 312 Buncher

FIREWOOD PROCESSORS Item ID: 100088 2010 Shop Built Wood Processor Contact: AUSTIN - ItEmail: has a Austin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch insert931-797-8029 tooth circle saw, 30 foot  Issue 364 410

Cooper Scragg Sawmill Item ID: 100113

‘05 Gehl CTL 70 Contact: JOE

Email: Joe@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 709 Contact: J Williams OR 801-362-2170 Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Firewood Processor - This is

manuals and receipts. Purchased new for $32,500. Item ID 13865.

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Processor log deck. Has a hydraulic grapple,

Item ID: 100081 chain and kicker that all runs off Contact: AUSTIN ofEmail: a 4 cylinder Mercedes power Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 unit. Has a931-797-8029 4’ chain saw that kicks

Lumbermens™  since 1986

❘

grapple, 5,000 original hours.

(excellent condition.). Item ID

kohing head. head works great.

One owner and comes with all

Has Log Lift. Uses 4-way wedge

10’ Cord King Firewood homemade processor with a 10’

motor, Rotobec continuous

amp gauges. Cuts logs up to 16”.

tach, oil pressure, water temp and

but electronic option is available.

Firewood Processor - This is a

knuckleboom, 30' boom, 75hp

Contact: JOE Email: Joe@lumbermensco.com - Pumps recently redone. 400 hrs Phone: 888-401-6367 EXT 709 ORpump. 801-362-2170 on injection always started

Contact: AUSTIN BANDIT Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc Phone: 888-401-6367 EXT 703 OR 931-797-8029 Chipper - Cat Under Carriage at

Value! PA. Item ID 12062. Sam x702

1994 Barko 160B - Electric

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 931-797-8029 low hours. Control panel includes

made the best valued log splitter. Contact: AUSTIN Email: Austin@lumbermensco.com Handles logs up to 32”. Uses Phone: 888-401-6367 EXT 703 931-797-8029 13HP Honda motor. Manual start

adjustable to single two way. Great

BARKO

2006 John Deere 648G III

- Small manufacturer in PA has Item ID: 100074

84’ John Deere 440C

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 capacity!. Item ID 13421. Sam x702

08’ Rottne H14

a Chomper Model 16 PDA Item ID: 100107

Sam ‘02 x702 Jackson Shavings Mill Item ID: 13736 LOGGING EQUIPMENT

Best Value Portable Log Splitter

Tureny gang edger combo (70 inches), independent, can run things atItem both ends the same time, infeed ID: 13920 and an outfeed. Electric, but it Contact: Austin doesn't have the electric motor on it right Ph:now. (888) 401-6367 x703

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

2014 John Deere 640H

with 850Item HP. 5300 hrs. Mill in ID: 100091

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

13238. Chris Itemx700 ID: 100077

1995 Barko 775 B Feller Buncher

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners

Tigercat 250 w/Grapple Saw

have only used it 100058 to load trucks or Item ID:

as a backup as needed. Has a CTR Contact: AUSTIN Email: Austin@lumbermensco.com delimber, grapple has been rebuilt. Phone: 888-401-6367 EXT 703 931-797-8029 Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 540B 84’ John Deere

1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 control, 931-797-8029 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timberjack The Tree380 Item ID: 99926 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

John Deere 540G2 Cable ADVERTISING SALES Skidder Morris Woods

ID: 53891 (888) Item 401-6367 ext. 704 morris@lumbermens.co Contact: SAM Email: Sam@lumbermensco.com MARKETING DIRECTOR Phone: 888-401-6367 EXT 702

Item ID: 14218

Hot Springs, ItemArkansas ID: 100072 www.arkloggers.com Contact: JOE

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 703 888-401-6367 709 72NDPhone: ANNUAL GREAT EXT LAKES 931-797-8029 OR 801-362-2170

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: ‘11 Tigercat 620D Lumberman's Exchange ItemBox ID: 1916 13929 P.O.

Columbia, Contact: SAM TN 38402 Email: Sam@lumbermensco.com The Lumberman's Exchange is 702 Phone: 888-401-6367 EXT

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Risley Rolly 2 and writers, the Lumberman's Item ID: 1993 Exchange, its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com inPhone: whole or part, is prohibited 888-401-6367 EXTwith 702 out written consent. ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC 2004 Timbco 445EXL expo.com/ LOGGING & BIOMASS EXPO Husky Brute XL 235 Item ID: 100004

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Item ID: 14170

KENTUCKY WOOD EXPO Contact: AUSTIN Austin@lumbermensco.com Fri, Email: 15 Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 703

Lexington, Kentucky 931-797-8029 http://www.kfia.org/ KentuckyWoodExpo.aspx

is supported on both sides. This

15’ Tigercat 724G

is an extremely Item ID:accurate 100101 machine

in ve1y good condition, Cuts 130 Contact: AUSTIN Email: feet a Austin@lumbermensco.com minute also has CLT presses. Phone: 888-401-6367 EXT 703 Item ID931-797-8029 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

has been rebuilt, it has a 24foot in

Contact: AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed Phone: 888-401-6367 EXT 703deck with 44931-797-8029 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

97’ John Deere 548G2

10 hoursItem on this ID:machine 99972 since it

Escanaba, Michigan

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 12’ John Deere 437D sam@lumbermens.co Item ID: 14209 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Danckaert Band Resaw - Roughly

Prentice 2384

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Timbco 820D

** INFO LINK** Item ID: 27398

Sam07’ x702Tigercat 620C Item ID: 14248 CARRIAGES & DRIVES

Item ID: 18370

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO 07’ Tigercat 724E Fri, 25 August - Sat,Deere 26 August 2005 John 643H

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........ 36 10’Equipment John Deere 648H Item ID: 14210 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029.............. 17

Morbark ..................................... John Deere 437E 9

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

14’Boiler John............................. Deere 750K 14 Hurst Item ID: 10053 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 703 22 OR 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" Prentice bottom saw andKnuckle 36" top saw 384

Knuckleboom Loader

Boom & Delimber

STACKING RAC

Multitek Item ................................... 12 ID: 63181 Piper's Saw Contact: SAMShop.................... 13 Email: Sam@lumbermensco.com

Rotochopper ............................ Phone: 888-401-6367 EXT 702 40

Item ID: 49732

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

1998 John Deere 548G Grapple skidder

Thomas Industrial Controls ..... 10 Timbco 445EXL Hotsaw

FellerSaw Buncher Union Grove & Knife.. 2, 37 Item ID: 47200 Universal Refiner ................... 23 Contact: SAM Email: Sam@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 25

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2012 Tigercat 250C Item ID: 99966

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

'09 John Deere 753J Buncher Item ID: 14106

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: J Williams OR 931-797-8029

Ph: (888) 401-6367 x701

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Price $45,000

L O G G I N G

‘16 Halverson H140 Bandit 1850 Track Chipper Item ID:(DEMO) 99904 Skidsteer

Item ID: 80318

Item ID: 29966

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2017 Eco Log 688D Item ID: 99994

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

2016 Cat 563C

Item ID: 99970 with 1700 hours, in very good

Rhottne F-11 Item ID: 99976

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2012 Cat D6K XL

Best ValueItem Portable Log Splitter ID: 14169

Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

- Small manufacturer in PA has Contact: AUSTIN Email: Austin@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Contact: AUSTIN

condition. Easily produces high Email: Austin@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item Franklin ID 13644. Sam 132 x702 Forwarder Item 100093 FIREWOODID: PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT - ItPhone: has a 353 Detroit diesel, 40703 931-797-8029 inch insert tooth circle saw, 30 foot

 Issue 364 410

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with 848L a 10’ 2015 John Deere

Itema hydraulic ID: 83128 grapple, log deck. Has

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com ofPhone: a 4 cylinder Mercedes power 888-401-6367 EXT 703 unit. Has 931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820. Sam2009 x702 Valmet 840.4 Item ID: 79249 Firewood Processor - This is aContact: ChomperAUSTIN Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 648H

Sam x702 Grapple Skidder Item ID: 96833 LOGGING EQUIPMENT

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar180E DieselLoader engine Prentice with 850 HP. 5300 hrs. Mill in & CTR saw Item ID: 99822 good condition. Just finished 10

Contact: AUSTIN Acre clearing job, ready to work! Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

‘93 Barko 180B

Item 2015 ID: 14077 Cat 545D Contact: Austin Item ID: 45196 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6 Timberjack 240 Tree Farmer Cable Skidder

Item ID: 13920 Item ID: 60608 Contact: Austin Contact: SAM Email: Ph:Sam@lumbermensco.com (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple,Timbco 5,000 original hours. 425B Item ID: 99962 (excellent condition.). Item ID

Contact: AUSTIN 13238. Chris x700 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT Buncher 703 1995 Barko 775 B Feller 931-797-8029

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Tigercat 830C

meterLeveling dont work. The last 2 owners Cutter 94337 have onlyItem usedID: it to load trucks or

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt. Phone: 888-401-6367 Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cat 515 Cable BELL Skidder

Item ID: 99873 1990 Bell Super T - This Bell has

SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

2010 JohnThe DeereTree 648H TC Skidder Item ID: 57023

that Started

Contact: SAM it All! Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING Tigercat 724ESALES Feller Morris Woods Buncher

(888) 401-6367 ext. 704 Item ID: 99815 morris@lumbermens.co

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MARKETING DIRECTOR

John Deere 650H LGP Item ID: 84627

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: 2013 John Deere 753J Lumberman's Exchange Item ID: 99902 P.O. Box 1916 Contact: AUSTIN TN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of 04’ Timbco 425EXL content submitted by advertisers w/Rolly Head and writers, the Lumberman's ID: 100108 Exchange, Item its principles and associates, are not held liable for Contact: AUSTIN errors or Austin@lumbermensco.com omissions. Reproduction, Email: inPhone: whole or888-401-6367 part, is prohibited EXTwith 703 out written931-797-8029 consent. ©2017 Woods Publishing

has been rebuilt, Contact: SAM it has a 24foot in Email: Sam@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 702 with 44 inch wheels, and all the

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC John Deere 540D 2007 Cat 517 expo.com/ LOGGING & BIOMASS EXPO Item ID: 5613

Item ID: 60554

KENTUCKY WOOD EXPO Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.comFri, Email: Sam@lumbermensco.com 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 Lexington, Kentucky 931-797-8029 http://www.kfia.org/ KentuckyWoodExpo.aspx

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Mulcher is anFranklin extremely accurate machine Item ID: 99927 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Phone: Item ID888-401-6367 13876. Austin EXT x703702 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

ID:machine 13851 since it 10 hoursItem on this

Contact: SAM Sam@lumbermensco.com 72NDEmail: ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 702

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

‘03 John Deere 748GIII

Hot Springs, ItemArkansas ID: 92188 www.arkloggers.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 2013 John Deere 437D sam@lumbermens.co Item ID: 96805 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Danckaert Band Resaw - Roughly

2012 Eco Log 590D

Cat 518 Grapple Skidder

** INFO LINK** Item ID: 99996

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 74169

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August Sat, 26 August Cat 939- Crawler Loader

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

2003 CARRIAGES Tigercat 250 & Log Loader DRIVES

Item ID: 46268 2010 Cardinal HD Carriage Contact: WALKER Carriages (Sawmill) - Cardinal Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriage line it includes carriage

B & B Mfg. ............................... 18

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)450 ........ 36 95Equipment Timberjack

Morbark ..................................... 9

Log Max 7000

Dual Arch Skidder 32 Corley Mfg ..............................

Item ID: 12270 CRD Metalworks .................... 25

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Barko 395ML

Multitek Item ................................... 12 ID: 99943 Contact:Saw WALKER Piper's Shop.................... 13

Contact: AUSTIN Email: Austin@lumbermensco.com CW Mill-ArmorHog 17 Phone: 888-401-6367 EXT 703 OR.............. 931-797-8029

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................ 40 OR 931-797-3915

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Buying? Selling? lumbermensco.com l 888.401.6367

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 27

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION, Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

98’ Timberjack 460C

Clark 667

Item ID: 100106

Item ID: 59500

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Halverson H140 Prentice 210E Loader Item ID: 79682 Skidsteer (DEMO)

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 931-797-8029 Ph: (888)OR 401-6367 x701

JD 437D loader Item ID: 35922

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Caterpillar D4H Item ID: 99982

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin John401-6367 Deere 440A Ph: (888) x703

Cable Skidder

Item ID: 99941 with 1700 hours, in very good Contact: WALKER

condition. Easily produces high Email: Walker@lumbermensco.com

‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam28000 x702 Hood Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com - ItPhone: has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 410

Item ID: 8834

Contact: SAM Email: Sam@lumbermensco.com ‘05 Gehl CTL 70EXT 702 Phone: 888-401-6367

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Phone: 888-401-6367 EXT 707 quality chips with patented OR 931-797-3915

John Deere 437D Log Loader

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

John Deere 750J

Best Value Portable Log Splitter Forestry Dozer - Small manufacturer in PA has Item ID: 62252

well built processor. Item ID 13820.

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Item ID: 10075 log deck. Has a hydraulic grapple,

Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com ofPhone: a 4 cylinder MercedesEXT power 888-401-6367 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: AUSTIN Email: Austin@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Tigercat 240B Knuckle Boom Loader

good. in good working order. 22in

amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

PRENTICE new2005 for $32,500. Item ID210E 13865. Sam x702LOG LOADER Item ID: 99946

LOGGING EQUIPMENT BANDIT

50% or better. 475 hp Cummins

adjustable to single two way. Great

‘95 John Deere C6 93’ Prentice 210 ID: 14216 TreeItem Farmer

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available. Has Log Lift. Uses 4-way wedge

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

(excellentItem condition.). Item ID ID: 76297 13238. Chris x700 Contact: SAM Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702 - Pumps recently redone. 400 hrs

Email: Sam@lumbermensco.com Phone: 888-401-6367 Handles logs up to EXT 32”.702 Uses

13HP Honda motor. Manual start

Item ID: 14077 John Deere 748G3 Contact: Austin Item ID: 99990 Ph: (888) 401-6367 x703

13’ Tigercat 234B Sam x702 Item ID: 100100 Firewood Processor - This is Contact: AUSTIN aEmail: Chomper Model 16 PDA Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1999 Bandit 1900 Tracked Disc OR 931-797-3915

made theSAM best valued log splitter. Contact:

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

John Deere 648D

with 850 Item HP. 5300 Mill in ID: hrs. 99942

good condition. Just finished 10 Contact: WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready Phone: 888-401-6367 EXT 707to work! OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

grapple, 5,000 original hours.

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Barko 160B Self-

meterPropelled dont work. The last 2 owners Loader have onlyItem usedID: it to load trucks or 99812

as a backup Contact: SAM as needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple EXT has702 been rebuilt. Phone: 888-401-6367 Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H Item ID: 85729 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Phone: 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

JD 643G The Tree that Started Contact: JOE it All! Email: Joe@lumbermensco.com Item ID: 80565

Phone: 888-401-6367 EXT 709 OR 801-362-2170

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALESArch Tigercat 630 C Dual

Item ID: 59580 Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Item ID: 99947

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 72ND ANNUAL LAKES ORGREAT 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes 2015 Cat 563C to: Lumberman's Exchange Item ID: 72531 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack 380C Exchange, its principles and Item ID: 72259 associates, are not held liable for errors or omissions. Reproduction, Contact: WALKER inEmail: wholeWalker@lumbermensco.com or part, is prohibited with out written888-401-6367 consent. Phone: EXT 707 ©2017 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Log Excavator 225 LC is anLoader/ extremely accurate machine Item ID: 51519 in ve1y good condition, Cuts 130

Item ID: 99945

KENTUCKY WOOD EXPO Contact: WALKER Walker@lumbermensco.com Fri, Email: 15 Sept - Sat, 16 Sept Phone: 888-401-6367 EXT 707 Lexington, Kentucky OR 931-797-3915

Contact: AUSTIN Email: feet aAustin@lumbermensco.com minute also has CLT Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648l

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

16’ John Deere 640L

Sam x702 Item ID: 10016

John Deere 437D

** INFO LINK** Item ID: 96378

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 99939

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

presses.

Item ID 13876. Austin x703

http://www.kfia.org/ KentuckyWoodExpo.aspx

Cambridge, Ohio www.ohioforest.org

Delimber

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 Komatsu PC270LC sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

with 44 inch wheels, and all the

Selma, North Carolina www.midatlantic-logging-biomass SATCO 318T MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO chipper Morbark 23 disc processing head

Donna Heninger

MAILING ADDRESS

Contact: SAM Email: Sam@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 702

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

EQUIPMENT REPS

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

10 hoursItem on this ID:machine 99810 since it has been rebuilt, it has a 24foot in

Escanaba, Michigan

DESIGN DIRECTOR

Austin Woods Item ID: 43950 (888) 401-6367 ext. 703 Contact: SAM austin@lumbermens.co

John Deere 650H LGP Forestry Dozer

Danckaert Band Resaw - Roughly

L O G G I N G

Morris Woods Item ID: 10836 (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Sat, 573 26 August Tigercat 630C Fri, 25 August -Cat

CARRIAGES & DRIVES

Contact: AUSTIN Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 Carriages (Sawmill) 931-797-8029- Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) Excavator 330Lx Link........ Belt36 Item ID: 70897 Corley Mfg .............................. 32

Morbark ..................................... 9

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CW Mill-ArmorHog .............. 17

Timbco 445D 14 Hurst‘00 Boiler ............................. Item ID: 14096 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 931-797-8029 24 LignomatOR .................................

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

48" bottom and 36" top saw 540Bsaw John Deere

Cable Skidder

Timbco 425EXL Barsaw

Multitek ................................... 12 Item ID: 74878 Piper's Saw Shop.................... 13 Contact: SAM Email: Sam@lumbermensco.com Rotochopper............................ 40 Phone: 888-401-6367 EXT 702 Row Electric ............................ 20

Contact: AUSTIN Email: CRDAustin@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029

with onboard log turners, carriage

'01 John Deere 648G3 Thomas Industrial Controls ..... 10 Item ID: 90899 Union Grove Saw & Knife.. 2, 37 Contact: SAM Universal Refiner ................... 23 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 l WoodMizer ................................

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Timbco 425C Item ID: 99948

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 29

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

06’ John Deere 650J

13’ Prentice 2384B

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Timberjack 360C

John Deere 210G

Item ID: 100025

Item ID: 100023

Item ID: 89706

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99983

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

FEATURED!

JD 648G Grapple Skidder ‘16 Halverson H140 Item ID: 54867 Skidsteer (DEMO)

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: J Williams 931-797-8029

Ph: (888) 401-6367 x701

Timberpro 620 Item ID: 79674

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Morbark 30XL Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650G

Item ID: 99852 with 1700 hours, in very good Contact: WALKER

Email: Walker@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXT 707 high OR 931-797-3915

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam525 x702 CAT Item ID: 99853 FIREWOOD PROCESSORS

Contact: 2010 ShopWALKER Built Wood Processor Email: Walker@lumbermensco.com

707 40 - ItPhone: has a888-401-6367 353 DetroitEXT diesel, OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 410

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Contact: SAM

Email: Gehl Sam@lumbermensco.com ‘05 CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

1995 Bell ultra T Best Value Portable Log Splitter Item ID: 100003 - Small manufacturer in PA has

well built processor. Item ID 13820.

‘93 Barko 180B

ItemJohn ID: 14077 Deere 648L Contact: Austin Item ID: 99993 Ph: (888) 401-6367 x703 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘95 John Deere C6 Timberpro 745C Tree Farmer Item ID: 99938 Item ID: 13920

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 525D Grapple skidder w/Winch

VALMET Sam x702 840.2 FORWARDER Item ID: 9770 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

(excellentItem condition.). Item ID ID: 99857 13238. Chris x700 Contact: SAM

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘00 Timberjack 1110

Sam x702Item ID: 14033

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

grapple, 5,000 original hours.

Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Phone: 888-401-6367 EXT 702Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 Q70 hours. Hour Franklin

Item ID:The 5458 meter dont work. last 2 owners

931-797-3915 Handles OR logs up to 32”. Uses

Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc 931-797-8029

have only AUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed. EXT Has703 a CTR Phone: 888-401-6367 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Contact: WALKER

Email: the Walker@lumbermensco.com made best valued log splitter. Phone: 888-401-WT 707

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Valmet 430FXL with Komatsu 233 barsaw

homemade processor with a 10’

log deck. Has hydraulic Itema ID: 99908 grapple, chain and kicker Contact: SAM that all runs off Sam@lumbermensco.com ofEmail: a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 702 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine John Deere 648G3 with 850 HP. 5300 Mill in Item ID: hrs. 99987

good condition. Contact: WALKER Just finished 10 Email: Walker@lumbermensco.com

Acre clearing job, ready Phone: 888-401-6367 EXT 707to work! OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item ID: 58544 BELL

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com a brand 888-401-6367 new Duetz engine. Lever Phone: EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item 98053 TheID: Tree that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! EXT 703 Phone: 888-401-6367

931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Franklin 170 ADVERTISING SALES

Item ID: 99827 Morris Woods (888) 401-6367 ext. 704 Contact: WALKER Email: Walker@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 707 OR 931-797-3915 MARKETING DIRECTOR

John Deere 648G III John Deere 640D Fri, 25 2006 August - Sat, 26 August Item ID: 100008 Hot Springs, Arkansas www.arkloggers.com Contact: JOE

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 72ND ANNUALORGREAT LAKES 801-362-2170

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

May be sent to morris@lumbermens.co

POSTMASTER

Send changes to: 848 Gaddress Grapple Skidder

Lumberman's Exchange Item ID: 85843 P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timbco 425EXL Exchange, Item its principles and ID: 99998 associates, are not held liable for Contact: WALKER Reproduction, errors or omissions. Walker@lumbermensco.com inEmail: whole or part, is prohibited Phone: 888-401-6367 EXT 707 with out written ORconsent. 931-797-3915 ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC John Deere 650H CAT 515 expo.com/ LOGGING & BIOMASS EXPO Item ID: 50512

is supported on both sides. This

Tigercat 620Emachine is an extremely accurate Item ID: 99984 in ve1y good condition, Cuts 130

Item ID: 99856

KENTUCKY WOOD EXPO Contact: AUSTIN Contact: WALKER Walker@lumbermensco.com Email: Austin@lumbermensco.comFri, Email: 15 Sept Sat, 16 Phone: 888-401-6367 EXT Sept 707 Phone: 888-401-6367 EXT 703 OR 931-797-3915 931-797-8029 Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: WALKER feet aWalker@lumbermensco.com minute also has CLT presses. Email: Phone: 888-401-6367 EXT 707 Item IDOR13876. Austin x703 931-797-3915

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

with 44 inch wheels, and all the

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: has beenJOE rebuilt, it has a 24foot in Email: Joe@lumbermensco.com Phone: 888-401-6367 709deck feed deck 20 foot outEXT feed OR 801-362-2170

Escanaba, Michigan

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 '93 John Deere 548E sam@lumbermens.co Item ID: 14184 Austin Woods Contact: AUSTIN ext. 703 (888) 401-6367 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Danckaert Band Resaw - 450C Roughly 1994 Timberjack Item ID: 100009 10 hours on this machine since it

Prentice 180

Tigercat 615C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

** INFO LINK** Item ID: 7822

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

Timbco 425D

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

John Deere 540B

CARRIAGES & DRIVES Item ID: 99986

Item ID: 17058

2010 Cardinal Contact: WALKERHD Carriage Email: Walker@lumbermensco.com Carriages (Sawmill) Cardinal Phone: 888-401-6367 EXT -707 OR 931-797-3915

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Prentice (AIM) 210 E ........ 36 Item ID: 98009 Corley Mfg .............................. 32

Mor barkTimberjack ..................................... 1994 240 B9 Item ID:74044 Multitek ................................... 12

John Deere 648G3 Grapple Skidder

Contact: AUSTIN .................... 25 CRD Metalworks Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 70740 Rotochopper ............................

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

John Deere 648H

Iron Bull ................................... 21 Item ID: 100006 Contact: KilgoreWALKER Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Lignomat ................................. 24 OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC Item ID: 51014

'04 John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... Phone: 888-401-6367 EXT 70323 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 31

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

JD 648 G3 Grapple Skidder Item ID: 4572

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Treefarmer C7T GM ‘16 Halverson H140 Grapple/Winch Skidder Item ID: 11726 Skidsteer (DEMO)

‘93 Barko 180B

96’ John Deere 643D Item ID: 14077 Item ID: 14207 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

90's Model Timberjack 240A Item ID: 14111

‘95 John Deere C6 Hydro Ax 411 Tree Farmer Item ID: 98954

Contact: WALKER ‘13 KMC 2500 Track Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Skidder

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Ph: (888) 401-6367 x703 931-797-8029

FEATURED HOT-BUY!

Prentice 2432 (’09)

Cat D4H TSK Grapple w/ Winch Equipment Item ID: 99843

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Prentice 180E Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640D Cable Skidder

with 1700 hours, in very good Item ID: 43930

condition. Easily produces high Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

John Deere 648H Grapple FIREWOOD w/Winch PROCESSORS Equipment

2010 Shop Item Built Wood Processor ID: 99849 - ItContact: has aSAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 410

Rayco 160 Forestry Mulcher Item ID: 77447

Contact: SAM

Email: Sam@lumbermensco.com ‘05 Gehl CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2014Portable Prentice Best Value Log 2210 Splitter “Self Propelled”

- Small manufacturer in PA has Item ID: 99900

made the best valued log splitter. Contact: AUSTIN

well built processor. Item ID 13820. Sam x702

John Deere 450H LGP Firewood Processor - This is Item ID: 99891 a Chomper Model 16 PDA Contact: SAM

Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

08’ Valmet 415EX Sam x702 Item ID: 99923

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

Email: Austin@lumbermensco.com Handles logs upEXT to703 32”. Phone: 888-401-6367 OR Uses 931-797-8029

Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR1900 Tracked

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor310E with a 10’ Prentice Item ID: 100044 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com 888-401-6367 703 ofPhone: a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Disc

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat5,000 559B Knuckle grapple, original hours. Boom Loader

(excellent condition.). Item ID Item ID: 99872 13238. Chris x700 Contact: SAM

Email:Barko Sam@lumbermensco.com 1995 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500Deere hours. Hour 540B John

Cable Skidder meter dont work. The last 2 owners have onlyWALKER used it to load trucks or Contact: Email: Walker@lumbermensco.com

as a backup as needed. Phone: 888-401-6367 EXTHas 707 a CTR

or 931-797-3915 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Timberjack 225 Cable Skidder

x702

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 Remote control. Big production 931-797-8029

1990 BellItem SuperID: T 46567 - This Bell has

with 850 HP. 5300 Mill in Item ID: hrs. 99817

 List  seLL  exchange  buy  save

Bell Ultra-C Tracked BELL Cutter

aContact: brandSAM new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timbco 425Exl Fri, 25 August 648 E-Cable Sat, 26Skidder August

Item ID: 1020

The Tree

Contact: AUSTIN that Started Email: Austin@lumbermensco.com Phone: 888-401-6367 it All! EXT 703 OR 931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Barko 495B ADVERTISING SALES

Item ID: 84253

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 888-401-6367 EXT 703 72NDPhone: ANNUAL GREAT LAKES 931-797-8029 931-797-8029

May be sent to morris@lumbermens.co

POSTMASTER

Send to: Johnaddress Deerechanges 650K LGP Lumberman's Forestry Exchange Dozer P.O. ItemBox ID: 1916 85213 Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXT 702 is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers Catsubmitted D5H TSK Grapple and writers, the Lumberman's Dozer Exchange, Winch its principles and 99809 associates, Item are notID: held liable for errors or omissions. Reproduction, Contact: SAM inEmail: wholeSam@lumbermensco.com or part, is prohibited with out written consent. Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC ‘89expo.com/ Timberjack 380A John Deere 648G3 LOGGING & BIOMASS EXPO Item ID: 14039

pressure guides. Top Casting wheel

Contact: AUSTIN KENTUCKY WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029 Lexington, Kentucky

Contact: JOE Email: feet a Joe@lumbermensco.com minute also has CLT presses. Phone: 888-401-6367 EXT 709 OR 801-362-2170 Item ID 13876. Austin x703

is supported on both sides. This

Timberjack 1270C

is an extremely accurate Item ID: 8676 machine

Item ID: 58995

in ve1y good condition, Cuts 130

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

‘80 John Deere 550

Tigercat 604 Cable Skidder

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

with 44 inch wheels, and all the

Escanaba, Michigan

Donna Heninger

MAILING ADDRESS

Contact: AUSTIN Email: feedAustin@lumbermensco.com deck 20 foot out feed deck Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

EQUIPMENT REPS

Phone: 888-401-6367 EXT 702

- Fabtech 10Harvestor hours on this machinehead since it Item ID: 99821 has been rebuilt, it has a 24foot in

ItemArkansas ID: 87791 Hot Springs, www.arkloggers.com Contact: AUSTIN

DESIGN DIRECTOR

Item ID: 6552 Austin Woods (888) 401-6367 ext. 703 Contact: SAM Email: Sam@lumbermensco.com austin@lumbermens.co

2001 Cat Band 311CU Processor/ Danckaert Resaw - Roughly

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher

** INFO LINK** Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 64107

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

Item ID: 44764 Morris Woods (888) 401-6367 Contact: AUSTIN ext. 704 morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 437C

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam Tigercat x702 604 E Cable Skidder 2016 Item ID:55393 CARRIAGES & DRIVES

Contact: WALKER 2010 Cardinal HD Carriage Email: Walker@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 707 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........ ‘98Equipment 611 Ex-Hydro Ax 36 Item ID: 13948 Corley Mfg .............................. 32 Contact: AUSTIN CRD .................... 25 Email:Metalworks Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog .............. 17 OR 931-797-8029

‘85 John Deere 440D 9 Mor bark ..................................... Item ID: 12453 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 70313 OR 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CAT 525C 14 Hurst2011 Boiler ............................. Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore 888-401-6367 Saw ............................. Phone: EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

‘05Industrial Tigercat 230B Thomas Controls ..... 10 Item ID: 13911 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... Phone: 888-401-6367 EXT 70323 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

648 G Skidder Item ID: 76963

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 33

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Tigercat 234B Knuckle boom loader

‘80 John Deere 540B Item ID: 11345

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 99820

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16‘05Halverson H140 Timberjack 608B Item ID: 13898 Skidsteer (DEMO)

Item ID:SAM JW-909632 Contact: Email: Sam@lumbermensco.com Contact: J Williams Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x701

2016 John Deere 437E Item ID: 100007

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

16’ John Deere 648L

92’ Timberjack 240A Grapple

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 100052

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

PS8 POST PEELER

Item ID: 100048

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

97’ Timberjack 240C

Item ID: 100055 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

Best ValueItem Portable Log Splitter ID: 100076

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item IDJohn 13644.Deere Sam x702548G Item ID: 100050

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 - It has a 353 Detroit diesel, 40 931-797-8029 inch insert tooth circle saw, 30 foot

 Issue 364 410

- Small manufacturer Contact: AUSTIN in PA has Email: Austin@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with437C a 10’ 2006 John Deere Item ID: 100078 log deck. Has a hydraulic grapple, Contact: chain andJOE kicker that all runs off Email: Joe@lumbermensco.com

ofPhone: a 4 cylinder Mercedes 888-401-6367 EXTpower 709 OR 801-362-2170

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820. Sam x702Timbco 425C ID: 100028 FirewoodItem Processor - This is

‘93 Barko 180B

‘08 ID: John Deere 335C Item 14077 Item ID: 14089 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95John John Deere C6 Deere 750J Item ID: 100015 Tree Farmer

Item ID: 13920 Contact: AUSTIN Email: Austin@lumbermensco.com Contact: Austin EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours. Komatsu 931.1 Item ID: 99949 (excellent condition.). Item ID

aContact: ChomperAUSTIN Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

Contact: AUSTIN 13238. Chris x700 Email: Austin@lumbermensco.com 1995 Barko 775 B FellerEXT Buncher Phone: 888-401-6367 703 931-797-8029 - Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

TIGERCAT 610C

Sam x702Item ID: 100046

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

2006 John Deere 848H

meter dont work. The last 2 owners Item ID: 100069

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

Contact: JOE Email: Joe@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 709 OR 801-362-2170 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

CatDiesel 515 engine 3412 Caterpillar Item ID: 100029 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good Just finished 10 Email:condition. Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

have only used it to load trucks or

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Timberjack 450C Item ID: 100026

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 a brand 931-797-8029 new Duetz engine. Lever control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Go Fast Run Around System

The Tree Item ID: 84282 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Precision Scragg

ADVERTISING SALES Item ID: 3607

Morris Woods Contact: AUSTIN ext. 704 (888) 401-6367 Email: Austin@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MARKETING DIRECTOR

SOUTHWEST FOREST PRODUCTS EXPO

Danchaert Band Resaw Woodmizer Fri, 25 August - Sat, 26 LT300 August Item ID: 13876

ItemArkansas ID: 99975 Hot Springs, Contact: AUSTIN www.arkloggers.com Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 GREAT LAKES 931-797-8029 OR 931-797-8029 72ND ANNUAL

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Baker Bandmill is an extremely accurate machine Item ID: 96085 in ve1y good condition, Cuts 130 Contact: SAMalso has CLT presses. feet a minute Email: Sam@lumbermensco.com Item ID 888-401-6367 13876. Austin x703 Phone: EXT 702 S & W 125 Band Mill with Caterpillar generator - Low hours

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 12432

S A W M I L L

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Austin Woods Contact: AUSTIN (888) 401-6367 ext. 703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 austin@lumbermens.co OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and Breezewood writers, the Lumberman's Band Mill Exchange, its principles and Item ID: 83736 associates, are not held liable for errors or omissions. Contact: SAM Reproduction, inEmail: wholeSam@lumbermensco.com or part, is prohibited with out written888-401-6367 consent. Phone: EXT 702 ©2017 Woods Publishing

is supported on both sides. This

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Cornell Gang Saw

Jackson Send addressLumber changes to: Harvester Circle Mill Lumberman's Exchange ItemBox ID:1916 2346 P.O. Columbia, TN 38402 Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange is 702 Phone: 888-401-6367 EXT

pressure guides. Top Casting wheel

Contact: AUSTIN WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Fri, 15 Sept - Sat, 16 Phone: 888-401-6367 EXTSept 703 OR 931-797-8029 OR 931-797-8029

Sam Wall (888) 401-6367 ext. 702 S&W 125 High Production Mill sam@lumbermens.co Item ID: 8019

POSTMASTER

it includes two sets of Mcdonough

Item ID: 99844

Donna Heninger

May be sent to morris@lumbermens.co

that go up and down, with airbags,

Selma, North Carolina www.midatlantic-logging-biomass ‘14 Hurdle 3-HD Block Sawmill MID-ATLANTIC Corinth American Sawmill Item ID: EXPO 13997 expo.com/ LOGGING & BIOMASS

EQUIPMENT REPS

AD SUBMISSIONS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

DESIGN DIRECTOR

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production

Escanaba, Michigan

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

MAILING ADDRESS

BANDMILLS & HEADSAWS

PenduBand CutResaw Oﬀ Saw Danckaert - Roughly Item ID: 10632 10 hours on this machine since it Contact: AUSTINit has a 24foot in has been rebuilt, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT deck 703 feed deck 20 foot out feed OR 931-797-8029 with 44 inch wheels, and all the

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Desjardin Shingle Mill

Fence Post Processing Sam x702Operation

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

Item ID: 63655

** INFO LINK**

Item ID: 42175 CARRIAGES & DRIVES

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Meadows #2 Deluxe 9 Mor bark ..................................... Item ID: 14250 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

Hurdle 2 Sawmill

Corley Mfg 32 Item.............................. ID: 72999 CRD Metalworks .................... 25 Contact: SAM Email: Sam@lumbermensco.com CW Mill-ArmorHog .............. 17 Phone: 888-401-6367 EXT 702 CW Mill-Hogzilla ................... 15

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls ..... 10 Meadows 2 Deluxe Sawmill

ID: 49890 Iron BullItem ................................... 21

Contact: SAM............................. 22 Kilgore Saw Email: Sam@lumbermensco.com Lignomat ................................. Phone: 888-401-6367 EXT 702 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Rogers 4 Headblock Circle Mill Item ID: 23205

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Row Electric ............................ 20

Dyna Products ........................ 35

Baker Double End Trim Saw

with onboard log turners, carriage

Package Miner Edger Union Grove Saw & Knife .. 2, 37 Item ID: 45399 Universal Refiner ................... 23 Contact: SAM Email: Sam@lumbermensco.com

WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

Morgan Band Sawmill Item ID: 100005

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

Phone

315.284.4126 PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM TO VIEW DESCRIPTION,

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'07 Morbark 3800 Horizontal Grinder

2016 Barko Tree Chipper Item ID: 16688

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

FORD PICKER TRUCK

M I S C E L L A N E O U S

Item ID: 100027

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 84439

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Morbark 23 disc chipper Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

'09 Mack Truck & H140 Trailer ‘16 Halverson Item ID: 74618 Skidsteer (DEMO)

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

AM General M818 Army Truck Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 707 Skidder or 931-797-3915

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Marmon Picker Truck & Pup Trailer Item ID: 59341

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 Ford 9000/Serco 8500 Item ID: 100057

Contact: AUSTIN with 1700 hours, in very good Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 OR 931-797-8029 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Morbark Item ID 13644. SamChipper x702 Item ID: 80356 FIREWOOD PROCESSORS

‘15 Cord King M44 Item ID: 13961

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 MACK CHN613 Item ID:Log 761Splitter Best Value Portable

well built processor. Item ID 13820.

2007 Morbark Chipper

Sam x702 Item ID: 9658

Firewood Processor - This is Contact: WALKER aEmail: Chomper Model 16 PDA Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 automatice firewood processor or 931-797-3915 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

‘93 Barko 180B

Item ID: 14077 Bandit 1850 Chipper Contact: Austin Item ID: 80543 Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere C6

09 Rotobec Loader on Tree Farmer '87 Peterbuilt

Item ID: 13920 Item ID: 1101 Contact: Austin Contact: AUSTIN 401-6367 x703 Ph: (888) Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703OR 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, original Prentice5,000 410EX truck hours. mounted

knuckle boom loader (excellent condition.). Item ID Item ID: 70691 13238. Chris x700

Contact: SAM 1995 Barko 775 B Feller Buncher Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

new for $32,500. Item -ID 13865. Bandit Grinder Chipper

approximately 1500 hours. Hour 02’ Jackson Lumber Harvester

ORup 931-797-8029 Handles logs to 32”. Uses

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

have onlyAUSTIN used it to load trucks or Contact: Email: Austin@lumbermensco.com as a backup as needed.EXT Has703 a CTR Phone: 888-401-6367 OR 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

- Contact: Small manufacturer in PA has AUSTIN Email: Austin@lumbermensco.com

made the888-401-6367 best valued EXT log splitter. Phone: 703 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Patriot GBN Nailer homemade processor with a 10’ Item ID: 99886 log deck. Has a hydraulic grapple, Contact: SAM that all runs off chain and kicker Email: Sam@lumbermensco.com ofPhone: a 4 cylinder MercedesEXT power 888-401-6367 702 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Sam x702Item ID: 72593

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Morbark 6036 Chipper

with 850 HP. 5300 Mill in Item ID: hrs. 75143

good condition. Just finished 10 Contact: SAM Acre clearing job, ready to work! Email: Sam@lumbermensco.com Phone:control. 888-401-6367 EXT 702 Remote Big production

 List  seLL  exchange  buy  save

Item ID:The 1187 meter dont work. last 2 owners

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Tajfun Firewood Processor x702 Item ID: 14249

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. Lever 888-401-6367 EXT 703 OR 931-797-8029 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 37

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY 2022 Loggers' Expo ............................. 6 ..........................................315-369-3078 Anson ...................................................... 11 ........................................800-663-7723 B & B Mfg. ............................................. 21 ........................................716-373-5881 B. H. Payne ............................................ 22 ........................................800-752-0627

‘93 Barko 180B

Blockbuster Inc. .................................... 19 ........................................888-775-4883

‘16 Halverson H140 Item ID: 14077 BPT .......................................................... 10 ........................................800-626-3947 Contact: Austin Skidsteer (DEMO) Brute Force ............................................ 14 ........................................715-678-0037 Ph: (888) 401-6367 x703 Item ID: JW-909632 Contact: J Williams Cord King ............................................... 4 ..................................... 888-219-WOOD Ph: (888) 401-6367 x701

Buck Equipment (AIM) ........................ 19 ........................................800-803-3365 Corley Mfg ............................................. 13 ............................................ 423-698-0284 CW Mill .................................................. 8, 10, 39 ............................800-743-3491 Dougherty Forestry Mfg..................... 16 ........................................405-542-3520 F&R Mfg. ................................................ 21 ........................................800-355-1250 GoFast Manufacturing ........................ 17 ........................................800-854-7439 Great Lakes Mfg. .................................. 21 ........................................877-248-5677

‘95 John Deere C6 Hurdle Machine Works Inc ................ 40 ........................................901-877-6251 Tree Farmer Holtec ..................................................... 3 ...........................................holtecusa.com

Hurst Boiler. .......................................... 19 ........................................877-774-8778 Item ID: 13920

Contact: Austin James Murphy Co. .......................... ‘13 G. KMC 2500 Track7 ..........................................425-486-1246 Ph: (888) 401-6367 x703 Kilgore Saw Company ......................... 17 ........................................888-857-5153 Skidder Lignomat ................................................ 22 ........................................800-227-2105

Item ID: 14078

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Lumbermens Wanted .......................... 37 ........................................931-797-8029 Contact: Austin capacity!. Item ID 13421. Sam x702 Menominee Saw........................... Ph: (888) 401-6367 x703 ........ 23 ........................................800-582-0470

BARKO

Midwest Sharpening ................. ......... 18 ........................................231-924-5953 1994 Barko 160B - Electric Multitek North America LLC ............. 17 ........................................800-243-5438

off onto Automati a conveyor. is a very 38 ........................................800-211-9468 knuckleboom, 30' boom, 75hp Pantron on, This Inc. ................... well built processor. Item ID 13820. motor, Rotobec continuous Piper’s Saw Shop.......................... ........ 8 ..........................................800-845-6075 Sam Electric........................................... x702 grapple, 5,000 original hours. Row 18 ........................................800-248-4479 Firewood Processor - This is (excellent condition.). Item ID Ryan's Equipment ................................. 12 ........................................989-427-2829

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 410

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16......................... PDA 13238. Chris x700 Smith Sawmill Service 2 ..........................................800-598-6344 automatice firewood processor 1995 Barko 775 B Feller Buncher Tajfun USA ............................................. 9 ..........................................360-224-1589 with JohnReﬁ Deere power unit with 15 ........................................800-277-8068 - Pumps recently redone. 400 hrs Universal ner ..................................

Woodlandia ........................................... low hours. Control panel includes 1 ..........................................877-508-8777 on injection pump. always started

tach, oil pressure, water temp and PLEASE PRINT amp gauges. Cuts logs up to 16”.

good. in good working order. 22in 2022 kohing head. FEBRUARY head works great.

you to Change your Address One If owner andneed comes with all Item ID 13185. Sam x702 or

Addand Your Name to our1999 mailing list, manuals receipts. Purchased Barko 160D - newthen engine with please complete this form and mail to:

new for $32,500. Item ID 13865. Sam x702

approximately 1500 hours. Hour

Lumbermens™meter Magazine dont work. The last 2 owners 1116 W 7th St., Ste. 297 EQUIPMENT have only used it to load trucks or Columbia, TN 38402

LOGGING BANDIT

Handles logs up to 32”. Uses

as a backup as needed. Has a CTR ❑ Please Add ❑ Please Change ❑ grapple Pleasehas Remove 1999 Bandit 1900 Tracked Disc delimber, been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins Item ID 13694. Sam x702 Company Name*: ________________________________________________________

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under at required Boom have minor leaks. *Company nameCarriage and address to cylinders process your change. Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

Individual Name: _________________________________________________________

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

Address:________________________________________________________________

Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________ 3412 Caterpillar Diesel engine x702 State: __________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401