The Lumberman's Exchange brought tyou by LBXonline.com

Since 1986 - The Original

February 2013

(800) 315-9950

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

DealS of the Month Sanborn 636

Item ID: 12761 Contact: Michelle Ph: 800-315-9950 x606

'01 Chevy C7500 Service Truck w/Trail King Trailer

Item ID: 12746 Contact: Tom Ph: 800-315-9950 x604

'94 Prentice 180D Log LDR

Item ID: 12759 Contact: Daren Ph: 800-315-9950 x603

For classifieds call (800) 315-9950

í

With your smart phone: Scan QR Code to visit—

www.LBXonline.com

Tracy Gordon owner of Gordon LumTracy owner of Gordon LumberingGordon purchased a Log Max 7000XT. bering purchased Log Maxabout 7000XT. We asked Tracy hisathoughts Tracy Gordon owner of Gordon LumWe asked Tracy about his new Log Max:his “Iathoughts am for bering purchased Loglooking Max 7000XT. Tracy Gordon owner of Gordon Lumhis new Log Max: “I am looking for fuel savings and his that is one reason asked Tracy thoughts about bering purchased a We Log Max 7000XT. fuel savings and that is one We asked Tracy his thoughts about whynew I, absolutely, a reason Logfor Max his Log Max: wanted “I am looking his new Log Max: “I am looking for why I, absolutely, wanted a Log Max head.

I looked a Log Max 6000 reason fuel savings andat that is one fuel savings and that is one reason head.

I looked at a LogaMax 6000 but needed bigger why I,a Log absolutely, wanted little a Log Max why I, absolutely, wanted Maxsomething but needed something a little bigger head. I looked at a head.

Log MaxisI6000 which why I chose the 7000XT. This looked at a Log Max 6000 but needed something a little bigger which is why I chose the 7000XT. This head is a good match for mixed and but needed something a little bigger which is why I chose the 7000XT. This head is a good match for mixed and heavy in our area. Everywhich ishardwoods why for mixed andI chose the 7000XT. This head is a good match heavy hardwoods in our area.I Everything has gone was heavy hardwoods inhead our area. is aEverygood smoothly match forand mixed and thing has gone smoothly and I was thing has gone smoothly and I was treatedhardwoods well by everyone involved.”

Western Canada heavy in our area.

Everytreated well by everyone involved.”

Toll Free 1.800.666.4474 From right to left, Dane Caton, operator, Tracy Gordon, treated well by everyone involved.” thing has gone smoothly and I was From right to left, Dane Caton, operator, Tracy Gordon, owner, and Baker, salesman, of Strong, USA From right to Gary left, Dane operator, Tracy Maine.

Gordon, owner, and Gary Baker, salesman, ofCaton, Strong, Maine.

To learn more about what Log Max Ph. 360.699.7300 treated well by everyone involved.”

To learn more about what Log Max owner,Scan and Gary Baker, salesman, of Strong, Maine.

Scan this QR code withthis QR code with your smartphone To learn more what Log Max smartphone From right to left,your Dane Caton, operator, Tracy Gordon, can do for you contact your can dolocal for youabout contact your local Eastern Canada Scan this QR code with barcode reader app to

barcode reader app to a video on ayour Log owner,seeand Gary Baker, salesman, of Strong, Maine. dealer today. see asmartphone video on a Log Max 7000XT Fixed barcode reader app to Head processing hard-7000XT Fixed Max Scan QRoncode with see a this video a Log woods on a Timber Pro Head processing hardyour smartphone 725 Track Machine Max 7000XT Fixed

woods onreader a Timber Pro barcode app to Head processing hard725 a Track Machine see video on a Log woods on a Timber Pro Max 7000XT Fixed 725 Track Machine Head processing hardwoods on a Timber Pro 725 Track Machine

Ph.your 506.869.2325 can do for you contact local dealer To learntoday. more about what Log Max dealer today. www.LogMax.com can do for you contact your local

dealer today.

www.LogMax.com

ww ww ww

2 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw

Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw

Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system!

* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase

Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd

Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 3

MAKE IT HAPPEN

SAVE UP T O

2,5OO*

$

CALL OR GO

F O R D E TONLINE A IL S

T BUTIL HE IN

USA At Wood-Mizer, employee-owned and built in the USA, we take a responsible approach to business and how we treat our customers. That’s why our mills are hand built one-by-one, why our customers believe there isn’t a better sawmill on the market, and why our promise of excellent service and quality products is unsurpassed. You can make it happen. We got your back.

800.553.0182 | woodmizer.com

© 2013 Wood-Mizer LLC *Price subject to change without notice. $2,500 savings on the LT40HDG29. Other savings on selected models.

ORA 35187 LumbermansExchMakeHappenFeb.indd 1

1/17/13 1:05 PM

The

Original

Lumberman’s Exchange Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

Publisher Woods Publishing

For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com CHIPPERS Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603

Complete rebuilt Precision 58” Chipper with Factory Warranty. - Item ID-12232 Daren 800-315-9950 x603

** Auctions **

James G. Murphy — Page 8

www.murphyauction.com

All-Coast Forest Products Thursday • February 28 • 9:00 am

Design Director Heninger & Associates lbxonline@comcast.net

Bid Live or Bid Online with MurphyLive!

Equipment Representative Tom Hirt (800) 315-9950 x604 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (800) 315-9950 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

One of the All-Time Greats!

COMPLETE SAWMILLS Meadows #2 Sawmill Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk

Advertising Sales Morris Woods (800) 315-9950 x602 morris@LBXonline.com

Equipment Reps Equipment Representative Daren Bodine (800) 315-9950 x603

The Model “A” Baker Band Resaw:

13880 Monte Vista Ave., Chino, California

** Calendar **

75th Oregon Logging Conference Coming Feb. 21–23, 2013 Lane County Convention Center Eugene, Oregon

** INFO LINK **

st The Mo Band r a l u Pop in the Resaw ld!

Wor info@bakerproducts.net Call: (800) 548-6914 www.logtolumber.com

Your Log To Lumber Leader

- clock face lumber dial controls for setworks & dogs.

Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator.

- Item ID-11086 - Michelle 800315-9950 x606

CONVEYORS 36’ Belt Conveyor - 36’ Belt Conveyor comes with drives - Item ID-12584 - Daren 800-3159950 x603

EDGERS & GANGS

Amark........................................... 7

LM Equipment, Canada.............. 3

American Leasing..................... 19

LogMax......................................... 1

B & B Mfg................................... 24

M&F Gauge................................. 14

Meadows 4x36 Portable Edger - approx. 2 years old. machine has not been used in the last year. - Item ID-12581 - Daren 800-315-9950 x603

B. H. Payne................................. 13

Midwest Sharpening Service... 18

FIREWOOD PROCESSORS 2001 Multitek 2025 LDCS Firewood Processor - Owner stated this machine has a heavy duty design built for professionals, the Multitek Model 2025LDCS is a tough, portable, one-man firewood processor. Owner stated this processor has only 3,900 hours, unit is in great working order, features Multitek exclusive overhead shuttle grapple infeed system, 8-way adjustable star wedge, 3-strand hydraulic folding log deck, operator station with safety glass, joystick controls, quick connects for elevators,

Baker........................................ 5, 9

Multitek...................................... 16

Bartlett Saw Service................. 26

Oregon Logging Conference.... 38

Bay Equipment.......................... 37

Phase-A-Matic............................ 30

Buck Equipment (AIM) . .......... 23

Piper’s Saw Shop....................... 17

The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

Built-Rite.................................... 10

Precision Sharpening............... 21

Cord Master............................... 11

Resource Recovery................... 34

Corley Mfg.................................. 33

Rotochopper............................. 40

CRD Metalworks........................ 27

Row Electric.............................. 22

CW Mill Equipment..................... 2

Sawmill Exchange..................... 29

Dyna Products........................... 31

Select Sawmill............................ 20

Fecon.......................................... 32

SVE Portable Roadways........... 10

Hahn Machinery........................ 12

Universal Refiner...................... 15

Hosebee..................................... 28

US Blades................................... 36

James G. Murphy........................ 8

Vista Machine............................ 25

Kasco-SharpTech...................... 14

Weaver Electric......................... 25

Kilgore Saw................................ 35

Wood-Mizer.................................. 4

©2013 by Woods Publishing.

Litco............................................ 13

Lignomat.................................... 30

For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 5

Zip

❑ Please Remove

State

free equipment listings! Call – (800) 315-9950

'99 Bell Ultra C w/30' Dangle Hd

City

❑ Please Change

'01 John Deere 650H Dozer

Phone

✁

P.O. Box 1916 Columbia, TN 38402

*Company name and address required to process your change.

Address

Individual Name

Tom Hirt Phone: 800-315-9950 Ext. 604

The Original Lumberman’s Exchange

Company Name*

❑ Please Add

Call us today for all your used equipment needs!

DealS of the Month -January-

Item ID: 12715 Contact: Daren Ph: 800-315-9950 x603

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: 6 n

Equipment Representatives

Item ID: 12721 Contact: Michelle Ph: 800-315-9950 x606

Daren Bodine Phone: 800-315-9950 Ext. 603

'04 Tigercat 635 Bogie Grapple Skidder

Item ID: 12615 Contact: Tom Ph: 800-315-9950 x604

Michelle Bodine Phone: 800-315-9950 Ext. 606

The Original Lumberman’s Exchange

For classifieds call (800) 315-9950 or www.LBXonline.com

tandem 6,000 LB Dexter axles, operator station throttle control/engine controller.

Includes a 20’ Cord King conveyor. - Item ID-12720 Michelle 800-315-9950 x606 Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID12062 - Tom 800-315-9950 x604 Portable Firewood Processor with Circle Saw - Firewood Processor with a 48” Circle Saw, Powered by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. - Item ID-12435 Michelle 800-315-9950 x606 Shop Built Portable Firewood Processor w/48” circle saw - enclosed cab, 3 strand live deck, diesel powered, mounted on 5th wheel trailer, over had over 100k invested before he pasted away.

Family is open to offers on this machine - Item ID-12507 Daren 800-315-9950 x603

FORKLIFTS 1994 Moffett Truck Mount Fork Lift - Very clean machine.

Runs well. Owner using now.

2686 Hours. Priced to sell.

Great for delivering products or working in warehouse with high reach. This is a bargain!

- Item ID-12321 - Tom 800-3159950 x604 1999 Caterpillar TH63 Telehandler - SN: 5WM02702; Hours: 2,800; Self Leveling; 4 way/crab steer; Light Kit; 42’ Reach; 1.75 yard bucket; Forks; Good Rubber; Great for stacking lumber or pallets.

Perfect for utility work with optional bucket that is included. - Item ID-12667 - Tom

Visit us online at www.LBXonline.com!

Save Your Stubs & Pieces!

Now Accepting Visa & Mastercard

➨

Let us reprocess them $25 per 100 Now have Factory Seconds $25 per 100 sticks

800-315-9950 x604 2003 Manitou 523 - 1532 hours, 23ft reach, A/C, Grapple Bucket - Item ID-12604 Michelle 800-315-9950 x606 2003 Taylor T-180 Fork Lift 3220 Hours. 18,000 lb capacity.

S/N S-C1-23338. Good running condition. Cummins 6BT3.9 engine. Rear axle steer. Front Tires 14:00 x 24 at 60%.

Rear tires 10:00 x 20 at 50%.

Enclosed ROPS Cab. Two Stage Mast with Hydraulic tilt and side-shift. 6’ Lumber Forks. Priced to sell! - Item ID12546 - Tom 800-315-9950 x604 2004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4' Forks, Side shift, 4 Way steer, 12' Mast, Tires Front 31.5X1316.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604 2006 Taylor T-160 Articulated

Fork Truck - 2700 Hours.

16,000 lb capacity. S/N S-A117076. Articulated 4-Wheel Drive. Detroit 4-71 engine. 17.5 x 25 Tires at 60%. Enclosed Cab. Two Stage Mast with Hydraulic tilt and side shift.

Very nice condition. Priced to sell. - Item ID-12547 - Tom 800315-9950 x604 Hyster 70 XL2 Forklift Propane, 2199 hours - Item ID12607 - Michelle 800-315-9950 x606 Late 80’s Case W20C Wheel loader - Late 80’s Case W20C Wheel loader - Item ID-12606 Daren 800-315-9950 x603

GENERATORS Case 6590T Power Unit 150hp, 1363 hours - Item ID12611 - Michelle 800-315-9950 x606

HOGS/WOODGRINDERS West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start.

There is also a full set of extra hammers that go with it plus

2003 Manitou 523 Item ID: 12604 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 Daren 800-315-9950 x603

Logging Equipment 1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine

For Classifieds Call Your LBX REP at 1-800-315-9950

‘08 JLG G9-43A Squirt Boom Forklift Item ID: 12748 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com is Ready to work Serial #43A1589 - Item ID-12156 Daren 800-315-9950 x603 1974 JD 440B Skidder - Very strong skidder. New center pin. New JD Clutch. New Turbo on engine. Pulls extremely well. 18” tires at 40%. - Item ID-12459 - Tom 800315-9950 x604 1976 Clark 664 Cable Skidder - Approximately 7500 hours.

S/N 514F-2341-CAC. Strong February 2013 n 7

PUBLIC AUCTION

All-Coast Forest Products

9am - Thursday - February 28 • Preview 8-4, Wednesday, February 27

13880 Monte Vista Ave, Chino, CA REMANUFACTURED WOOD PRODUCTS PLANT - Planer Line w/STETSEN ROSS 6-10-A1 Planer, Breakdown Hoist, Transfers - Resaw Line w/6’ Resaw, In & Outfeeds - Rip saw line w/MEREEN-JOHNSON 424, 26” rip saw - GENERAC 130kw Generator - GARDNER DENVER EBEQGB 30 hp rotary screw compressor PLUS: Surfacing Line w/Mattison 224B Moulder/Surfacer, In & Outfeeds; Chop Saw Lines; Schurman Edger; Salem Hog; Chain Cutoff Saw; Filing & Grinding Room Equipment; Machine Shop Equipment & Tools; Material Racks & Shelves; Cat V130, V60B Forklifts; (6)’08-’02 Flatbed Trailers; Shop Trucks; Shipping Containers; Office Equipment & Furniture; Much More

Online bidding available with MurphyLIVE! James G. Murphy Co.

Commercial & Industrial Auctioneers

8 n

The Original Lumberman’s Exchange

1.800.426.3008 - 425.486.1246

murphyauction.com

Visit us online at www.LBXonline.com!

For 25 Years

MA D E I N THE USA!

Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well.

Center pin tight. Slight play in steering pin. Straight metal.

Weighs about 18,000 lbs. Can haul on 10 ton trailer. - Item ID12249 - Tom 800-315-9950 x604 1977 Mack DM Log TruckPrentice Knuckle boom Loader with Rotobec Grapple,telestick , joystick controls, hydraulic cooler Mack Axles, 675/235 Hp Engine, 25000 on Transmission overhaul, 1200 on new front tires and rims, 19ft from spindle to 1st rear axle, 20 ft bed, year and model of the loader unknown, newer than the truck - Item ID-12654 Daren 800-315-9950 x603 1977 Peterbuilt 357 Log Truck & Trailer - Very nice condition.

30K miles on rebuilt Cummins 400 Big Cam installed in ‘89 and recently rebuilt with less than 30K miles on rebuild.

40K Rockwell rear ends. Fuller 146 - 13 speed transmission installed in ‘89. New 6” stacks.

4 new tires on front pulling tandem. Pulls great and AC works super! Includes trailer.

Super price! - Item ID-12562 Tom 800-315-9950 x604 1978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x604 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 Tom 800-315-9950 x604 1981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%.

Comes with forks, owner also

‘06 IH Service Truck Item ID: 12747 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

has bucket. - Item ID-12359 Michelle 800-315-9950 x606 1981 Hydro Ax 411B w/ Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very nice machine for the price.

- Item ID-12538 - Tom 800-3159950 x604 1983 Caterpillar 988B Loader with very low hours - Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B,

For Classifieds Call Your LBX REP at 1-800-315-9950

Hyster 70 XL2 Forklift Item ID: 12607 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 Daren 800-315-9950 x603 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID12092 - Tom 800-315-9950 x604 1985 Barko 550 Rail Mounted Material Handler - Very unique February 2013 n 9

TreadMatTM

Recycled Woven Tire Mat • Multi Purpose & will work with any current mat inventory • Tough - will out last any 2 ply wood mat • They adjust to any terrain • Environmentally Friendly

7' X 14' 765 lbs each

Your GREEN product exclusively from:

John Deere 440B Cable Skidder

www.LBXonline.com

www.LBXonline.com

Item ID: 12755 Contact: Daren 800.315.9950 Ext. 603

• No “handle with care” for this Mat. Move with any equipment.

• Lifting/Dragging cables on both ends. *Rated @ 2000 lbs. on straight pull.

• Rugged — Virtually indestructible.

• Layered Treadmat™ provides additional load bearing capacity in soft soil conditions.

SVE Portable Roadway Systems, Inc.

‘99 Bell Ultra T on Tracks

800.762.8267

6128 -F Brookshire Blvd.

Charlotte, NC 28216 sales@mudtraks.com www.mudtraks.com

“BUILT-RITE”

- 68 HP Diesel - Full Length Logs - Triple-Multi Wedge - 3.5 Second Cycle - Hourglass Rollers

machine. Needs some work, but runs and operates. Detroit 4-71 engine. Three section 55’ boom has some rust, but no cracks. Rail car runs off hydraulics on machine.

Can travel up to 15MPH. Can push other rail cars. Great opportunity if you have rail spurs on your yard and could use a machine to manage material and other rail cars.

- Item ID-12573 - Tom 800-3159950 x604 1986 JD 648D Grapple Skidder - Working today.

Very well maintained. 23,500 hours. Rebuilt engine at 3500 hours. New Hyd Pump. 100” Continuous Esco Grapple. Has winch, but needs drive shaft... not working now. 28L x 26 tires at 50%. Nice machine for the money. - Item ID-12561 - Tom 800-315-9950 x604 1987 Cat D4H Grapple Dozer Good running Hi Track dozer with 6500 hours and wide flotation tracks. Esco grapple with 84” opening. 6 way blade works well. Could need rear idler in near future. Hard to find machine. Real work horse!

- Item ID-12623 - Tom 800-3159950 x604 1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well

11 HPWS

Give Your Customers the Wood they Want with the BUILT-RITE PATENTED “MULTI-WEDGE” SYSTEM

- 46 HP Diesel - 16”x22’ Logs (Opt. 20” x 22’ Logs) - Multi Wedge - Live Deck

10 n

The Original Lumberman’s Exchange

Item ID: 12644 Contact: Michelle Ph: 800-315-9950 x606

Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 Daren 800-315-9950 x603 1988 Morbark 27 RXL Whole Tree Chipper - Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!!

- Item ID-12519 - Michelle 800315-9950 x606 Sold­1988 Peterson 4800 Flail Debarker - Very clean unit. Runs well. Cummins engine. 2400 hours. Belt Drive design. Priced to sell. Still has a lot of life left. - Item ID-12711 - Tom 800-315-9950 x604 1988 Timberjack 450B Dual Arch Grapple Skidder w/winch - w/winch, 2045 hours, 23.1 tires front 40% and rears are 50%+/-, Pins are tight, Machine is ready to WORK!! - Item ID12512 - Michelle 800-315-9950 x606 1989 Cat 518G Grapple Skidder - 28Lx26 tires, Rear tires are 50% and fronts are 65%.

Machine is working Daily!! Item ID-12621 - Daren 800-3159950 x603 1989 Clark 666 Dual arch grapple skidder - The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 -

Visit us online at www.LBXonline.com!

ction u d o r ance est P High t Mainten !! s d!

Lowe rantee Gua

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

New Grapple System Now Available!

2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663 For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 11

Introducing the New HFP150 Compact Firewood Processor

HGP150 Firewood Processor

Hahn Machinery Inc. P.O. Box 220 • Two Harbors, MN 55616 www.HahnMachinery.com

T

he HFP150 is the latest addition to the Hahn line of firewood processing attachments for skid steer loaders and compact track and wheel loaders. When attached to a properly equipped loader, the HFP150 Compact Firewood Pro can pick up a 6' to 10' log, cut it into firewood blocks, and split those blocks into 2, 4, or 6 pieces. All functions are performed by one person seated in the loader's cab—resulting in greater safety, improved productivity, and making cutting and splitting firewood a whole lot easier.

The HFP150 Compact Firewood Pro is: • An affordable alternative for the person looking for a faster, easier, more efficient, and safer method of putting up firewood— but doesn't require the production capacity you get with the larger Hahn HFP160 commercial unit.

• A smaller, lighter, simpler machine that runs well on most mid-sized skid loaders in the 45hp to 50hp range—with hydraulic flows of 15 gallons per minute.

A unique "Shuttle Trough" system carries the log up to the splitting wedge

The high speed chainsaw cuts a firewood block 12" to 20" long

For more information on the­— HFP150 Compact Firewood Pro

1-800-483-8825

for complete details on this or any Hahn firewood processor or forestry equipment call or email info@hahnmachinery.com 12 n

The Original Lumberman’s Exchange

As the splitting cylinder pushes the block through the wedge, the Shuttle trough is advancing the log for another cut

Visit us online at www.LBXonline.com!

‘97 Toro Progrind Tub Grinder Item ID: 12749 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Daren 800-315-9950 x603 1989 JD 640D Grapple Skidder - 640D turbo with EZ Grapple.

Serial Number W640DC507211 28L-26 tires 3@35% 1@85%.

Runs good. Needs seat recovered and front U-Joint.

Priced to sell! - Item ID-12676 Tom 800-315-9950 x604 1990 Bell Super T Feller Buncher - Totally rebuilt by owner. Rebuilt Deutz engine; Rebuilt Wheel Motor; Standard controls: Comes with both 30” bar dangle head and 15” shear head. 23” Tires - Item ID-12710 - Tom 800-315-9950 x604 1990 Volvo Grapple Truck 1990 GMC Volvo WG64 tandem axle grapple crane truck.

The GVW is 56000. Cummins diesel, horsepower 270. 9 speed manual transmission with spring suspension. No odometer only a hour meter.

Hour meter reads 21965.

The crane model number is BAR803-C S/N 18615. It has a 20’ reach. Has a steel bed and has a front GAWR of 16,000 and a rear or 44,000 with floatation steers. It has good tires and runs good, - Item ID12495 - Tom 800-315-9950 x604 1991 John Deere 548D Grapple Skidder - with winch, machine is tight and ready to work Item ID-12208 - Daren 800-3159950 x603 1992 Ardco Swamp Trencher - Model H-150. SN:1522.

Only 2200 HRS. Very Good

‘02 Mack w/ Prentice 2124 Loader Item ID: 12750 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%.

This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner.

FOB: GA. - Item ID-12312 - Tom 800-315-9950 x604 1992 John Deere 643 Shear Feller Buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostatic transmission. Strong John Deere 6.8 L turbo diesel, 175 hp, no smoke or blow by.

Many new parts & hoses.

Great brakes. No heat or a/c.

Has a 20” shear head. - Item ID12537 - Tom 800-315-9950 x604 1993 Morbark 30/36 Drum Chipper with Cab and Loader - 1993 Morbark 30/36 Drum Chipper with Cab and Loader,

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

For Classifieds Call Your LBX REP at 1-800-315-9950

Web Site: www.paynesaws.com February 2013 n 13

‘06 Tigercat 720D Feller Buncher Item ID: 12752 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

$15,905 Effective May 1, 2012

REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243

BUILT TO LAST www.realtuffbaler.com

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Dimensions & Specifications

• Easy to use • Built of high quality materials and workmanship • Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method

- (2) Hydraulic Cylinders are controlled by using a two spool valve - 30 H.P. motor (220/440 volt 3 phase) starter not included - 25 G.P.M. Pump - 50 Gallon reservoir capacity

. Easy to use

. Built of high quality materials and workmanship

- Only the highest quality industrial components are used

. Heavy Duty to enable a broad spectrum of baling options . Easily loads by conveyor or manual method Most Popular Baler Sizes

Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

Bale Size

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

Bales per Hour

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .

Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00

Cat 330hp, fire suppression system, new hydraulic hoses, come with approx. 12 sets of knives. - Item ID-12716 - Daren 800-315-9950 x603 1993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%.

Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604 1993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics.

Heat and AC. Some cosmetic dents. Great value. - Item ID12289 - Tom 800-315-9950 x604 1994 Cat 518C Grapple Skidder - 9700 hours. 24.5 x 32 tires including chains at 40%. S/N 9HJ0350. New fuel injectors.

New water pump. Runs good. Working today. Single arch grapple. Just added new chains on rear $2000. and rebuilt grapple snubber $2000. Complete service just completed where they dropped all pans and changed all fluids. Sweet package! - Item ID-12660 - Tom 800-315-9950 x604 1994 JD 640E Cable Skidder -

2010 Woodmizer LT40 HD Item ID: 12754 Contact: Michelle Ph: 800-315-9950 x606

www.LBXonline.com Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 Tom 800-315-9950 x604 Sold­1995 1210 Timberjack Forwarder - 8 wheeler, 14,000 hours , in last 3,000 hours New crate engine with new turbo, injection pump etc. , New pumps and drive motors, all new joysticks and steering joystick, New rear end, new front and rear window (side windows need replacing they are cloudy), runs out good , loader could use a few bushings ( hasn’t been bushed in about 6k hours), new extension boom, Good super grip bucket tires are wore about 30%, no tracks included - Item ID-12702 - Tom 800-3159950 x604 1995 Bell Ultra T - Used Bell Ultra T tree cutter 28L Tires with chains, New saw motor kit to run 3/4 pitch bar and chain - Item ID-12646 - Michelle 800-315-9950 x606 1995 Cat D4H LGP With Swing Grapple - 1995 D4h tsk lgp, new u/c, 3304 eng. New paint, new trans pump, no hour meter, a/c hoses cut and missing some a/c components.

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

14 n

The Original Lumberman’s Exchange

03/08

Visit us online at www.LBXonline.com!

The Rascal H.A.W.G. Ideal to Grind: Construction Waste • Stumps • Land Clearing Green Waste • Asphalt Shingles • Palm • Pallets Difficult & Dirty Materials Simplicity Mastered Ease of Operation with Less Downtime Change Particle Size While You Grind

Universal Refiner Corporation P. O. Box 151 • Montesano, WA 98563

800-277-8068 For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 15

P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

www.multitekinc.com • sales@multitekinc.com

Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

‘02 Tigercat 845B w/22” Hot Saw Item ID: 12751 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Pulls strong runs good no smoke, blow by, doesn’t use oil. 100” esco swing boom grapple. Lots of new hoses and cyl, repacked - Item ID12663 - Daren 800-315-9950 x603 1995 Caterpillar 518C Grapple Skidder - This machine is clean and is ready to go to work. Over $12,000 worth of 16 n

‘10 Woodmizer LT50 HD Item ID: 12757 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses.

The steering valve, grapple

The Original Lumberman’s Exchange

valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed.

The tires are 28L- 26 in size and the tread will average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-3159950 x603 1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800315-9950 x604 1995 Morbark Wolverine 3

wheeled with Shear head - 5351 hours, Drive tires are 90%, Machine is ready to Work. - Item ID-12516 Michelle 800-315-9950 x606 1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. - Item ID12531 - Tom 800-315-9950 x604 1995 Prentice 210D - mounted on a 1989 Mack truck, new battery and cables, new starter, new muffler and pipe, 4 cyl cummins engine, all fluids and filters recently changed, turn table is tight, Stick controls, All rebuilt suspension on the mack truck, Truck is road ready. - Item ID-12652 - Daren 800-315-9950 x603 1995 Valmet 603 w/Koehring 18” Saw Head - Like New! Must Sell! Totally rebuilt.

Visit us online at www.LBXonline.com!

PIPER’S Saw Shop 260C Ford Industrial Tractor

Item ID: 12723 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com New Cummins 4BT Engine.

New Disc on Koehring 18” bunching head. New glass in cab. New 28L tires! Pins tight.

Valve resealed. AC blows cold.

Can spin the tires! Owner painted for improved image on jobs. Just 4800 hours. Selling now due to larger timber and needs bigger machine. Must see to appreciate. This unit is totally ready for the woods.

Uses 4 gal/hour. - Item ID12545 - Tom 800-315-9950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps.

Comfort cab with working air.

28L tires with chains at 50%.

Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID12072 - Tom 800-315-9950 x604 1996 Bell Ultra T on Tracks 30” Dangle Head - 1996 Bell Ultra T on Tracks 30” Dangle Head, Deutz Engine with 3500 hours, Joystick Controls, U/C 90%, 24” Pads with 2” cleats, New Sprockets, A/C. - Item ID-12622 - Daren 800-315-9950 x603 1996 Hood 20000 Loader w/Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine.

Slasher and delimber run good. 30’ boom. Overall good condition. - Item ID-12433 Tom 800-315-9950 x604

5 7 0 6 • 5 4 8 800 • Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.71 $14.27 each Tell us you saw it here!

1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader.

Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID12229 - Tom 800-315-9950 x604 1997 Cat 515 Grapple Skidder - 8110 Hours. Good running machine. Single Arch Grapple.

28L Tires at 40%. Winch.

Comes with Low Boy! - Item ID12712 - Tom 800-315-9950 x604 1997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as

L im it e d T im e O n ly

yard machine. Loader runs and lift good. - Item ID-12261 Tom 800-315-9950 x604 1997 Prentice 210E TMS Package - 9850 Hours on this very clean machine.

Working today. Has total merchandising system with CTR 414 Delimber and CTR 42 Slasher. Well maintained. Has AC but is not working. - Item ID-12563 - Tom 800-315-9950 x604 1997 Timberjack 460 Grapple Skidder - 12,300 hours. Very well maintained. 28L x 26 tires

For Classifieds Call Your LBX REP at 1-800-315-9950

at 90%. Big winch. 100” Esco Grapple. Cummins engine.

Working today. - Item ID-12564 - Tom 800-315-9950 x604 1998 John Deere 650G Dozer - New tracks 95%, very good shape, 7,000 hours. 6-Way Blade. - Item ID-12700 - Tom 800-315-9950 x604 1998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed February 2013 n 17

BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, including…

We also offer expert Sharpening Services, plus…

Gang • Edger • Scragg Trim • Split • Strob …and

just about any Custom Saws you need to keep you cutting longer… for less!

Welded to your lengths!

Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

1998 Timbco 425 w/Quadco 2800 Saw Runs Good!

Item ID: 12719 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com to take pup trailer. Very well maintained. - Item ID-12493 Tom 800-315-9950 x604 1998 Pitts 42’ Log Trailer - Nice condition. 42’ long. 102” wide.

95,000 lb GVW. - Item ID-12565 - Tom 800-315-9950 x604 1998 Tigercat 230 Loader 9400 hours. Tight and dry. No leaks. AC blows cold. Priced to move! - Item ID-12616 - Tom 800-315-9950 x604 1998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine.

Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 Tom 800-315-9950 x604 1998 Timbco 425 w/Quadco 2800 Saw - Clean unit and well maintained. 2800 has 18 n

‘99 Bell Ultra C w/30” Dangle Hd Item ID: 12715 Contact: Daren Ph: 800-315-9950 x603

JD 6400 Farm Tractor

www.LBXonline.com

Item ID: 12744 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

360 degree rotation for max production. 24” single grousers. Undercarriage at 50%. Pumps are dry. Machine working today. - Item ID-12719 - Tom 800-315-9950 x604 1998 Timbco 820 Forwarder - Good running condition.

New Cummins engine. Tires at 80%. 5600 hours. Bunks included. Also had Clam Bunk Grapple Option included. Nice package. - Item ID-12454 - Tom 800-315-9950 x604 1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well.

Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom

800-315-9950 x604 1998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800-315-9950 x604 1998 Valmet 911.1 Harvester - Single Owner machine.

Super Clean and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/ hr. Slide Boom design easy to learn and operate. - Item ID12338 - Tom 800-315-9950 x604 1999 Bell Ultra C with 30” Dangle Head - 6922 hours, Brand NEW Cummins engine with 350 hours, 28lx26 tires at 50%, includes a set of mud

The Original Lumberman’s Exchange

chains at 90%, heat/air work great, no leaks, 2nd owner operator - Item ID-12715 Daren 800-315-9950 x603 1999 Cat 525B Grapple Skidder - heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. - Item ID-12618 - Daren 800-315-9950 x603 “1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; 656 HP Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-3159950 x604 1999 Hyuandai Robex 180 LC-3 Excavator - 40,000 pound machine. This machine runs excellent and has one jack leaking some. Machine has a 5.9 diesel engine that starts with a turn of the engine. Was vandalized and controller housing was broken along with the hour gauge.The controller panel works ok with it broken from socket. This machine had a little over 6000 hours on it before the gauge was broken. Undercarriage and turntable are in great shape. - Item ID-12722 Michelle 800-315-9950 x606 1999 Hyundai 280 w/Denharco

Visit us online at www.LBXonline.com!

Jake Hebenstreit Finance Consultant

Finance Your Equipment Purchase Today

1995 Bell Ultra T

• • • • •

Item ID: 12646 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com

(800) 644-1182 (503) 679-7370 Cell

‘99 Maxi-Grind 460 Grinder Item ID: 12739 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x604 1999 JD 643 DELTA Carrier w/ Rake - This machine is a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work a mower, feller buncher saw head, or high speed mulcher.

Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra capacity fuel tank, water tank, and hydraulic tank. This is a WORK HORSE and a super value! Comes equipped with a 10 foot rake. The cab is well appointed with cold air and heater. This machine was

recently completely serviced and is ready to go to work.

- Item ID-12624 - Tom 800-3159950 x604 1999 Mack DM 600 Truck with Prentice 120 - The DM 600 GK has a Mack 235 HP Engine; 44,000 mack rear ends with a gear ratio of 4:64; Mack 6 speed T20 transmission. Hour meter shows 4000 hours. Runs good. Strong Prentice 120E Loader with 25’ reach and continuous rotation grapple.

- Item ID-12448 - Tom 800-3159950 x604 1999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-3159950 x604 2000 Bell TF-120 Tracked Feller Buncher - 2000 Bell TF120 Tracked Feller Buncher, 3600 Hours, U/C 80%, 30” danglehead. - Item ID-12640 Daren 800-315-9950 x603 2000 Bell Ultra C Tracked Feller Buncher - Very clean unit and hard to find. Tracks at 75%. Air and Heat. 30” Felling Head. Ultra C Model with Cummins engine and Joystick Controls. - Item ID-12649 - Tom

No Down Payment on Most Transactions Application Only up to $100,000 Programs in “All Fifty States” Loans and Leases Available Same Day Approvals—Next Day Funding

Email: jake@americanlf.com Website: www.americanlf.com 800-315-9950 x604 2000 Cat M318 MH - Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Idaho.

Financing available. Possible RENT OPTION! - Item ID-12520 - Tom 800-315-9950 x604 2000 Morbark 23 NCL Chipper - 5,000 Hours, Rack ran on Cat engine, New pendant and tether, new roller planetaries and motors and new both pumps, New anvil, knife holders and counter knives, New drive belts, throat freshly rebuilt. New tires, disk bearings replaced and repacked with grease.

Nice condition. Nearly total recondition done 300 hours ago - Item ID-12701 - Tom 800315-9950 x604 2000 Peterbilt Sleeper Truck - Good running condition.

Priced to sell. - Item ID-12492 Tom 800-315-9950 x604 2000 Peterbuilt Logging Truck - N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 Michelle 800-315-9950 x606 2000 Sterling Road Truck/

For Classifieds Call Your LBX REP at 1-800-315-9950

Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x604 2000 Valmet 840 Six Wheeled Forwarder - Good running condition. 14,000 hours.

Tracks for rear bogeys. ProHeat system for cold weather starting. New grapple. AC/Heat work well. Front blade. Well maintained. - Item ID-12668 Tom 800-315-9950 x604 2001 CAT 330BL Log Loader Good running condition. 2000 hours on new hydraulic pump.

44’ Live Heel Boom w/Jewell Continuous Rotation Grapple.

S/N 6DR04994. New sprockets and rails. Cab riser and cab guard. Total hours 19,000.

- Item ID-12678 - Tom 800-3159950 x604 2001 John deere 650H Dozer - Engine has 11 hours use.

6522 total hours on frame.

It has new everything inside the engine including, rod and main bolts and bearings when engine was rebuilt. He also installed complete rebuild kit with crank replaced. New sensors for oil was installed, New complete exahaust February 2013 n 19

2007 JD 1110D 6-Wheeled Forwarder Great Condition!

Item ID: 12706 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com system, manifold, muffler, turbo and all components to install NEW. He replaced one transmission and motor sensors on right side of dozer.

Oil cooler replaced with new one and also new oil pump installed. Every Item for the engine was replaced new except cam and lifters. Dozer runs great but will need two bottom rollers replaced one on each side and there are three rollers bought to go with the dozer. Sprockets and front idlers are nearly new condition. Winch has been rebuilt and cost over $4600 to rebuild parts and labor. Has cab protection and shield protectors in place.

Instrument gauges are bad 20 n

‘00 Bell TF-120 Tracked Feller Buncher Item ID: 12640 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com and need to be replaced, water and hour gauge seem to be working correctly. Oil pressure gauge shows low pressure but with new crank and main bearings the oil pressure should be fine as there are no unknown noises from engine. Starter and Seat is also new. It will need new grousers or pads but new pins and bushings are installed.

- Item ID-12721 - Michelle 800315-9950 x606 2001 McCloskey 621REG Trommel Screen with Radial fines conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote. It has just over 8,200 hours, has had the drum replaced, has new rollers,

The Original Lumberman’s Exchange

‘98 Barko 160C on 6-Wheeled Drive Carrier Item ID: 12742 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com and a new belt and it was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed.

The machine runs great and is ready to go to work - Item ID-12358 - Daren 800-315-9950 x603 2001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701.

New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes.

Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super

clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800-315-9950 x604 2001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head.

New 12 tooth disc on saw.

Ready to work. SN FT4C-2002.

- Item ID-12486 - Tom 800-3159950 x604 2001 Timberjack 460D Grapple Skidder - Total Hours = 14,000.

Standard blade; Winch works.

Deere engine rebuilt at 8500 hrs, AC and Heater work, 44 front tires 50%, 43 rear tires 20%. Can drag logs today.

Runs decent - Item ID-12696 Tom 800-315-9950 x604 2002 Dynamic Chipping/Leaf Collection System - Brand new but without warranty.

185 HP Cat Engine. HeavyDuty Mlti-Task Prime Carrier; Hydrostatic 4 - Wheel Drive; Year-round utility. INCLUDES TWO DRUMS: One for Chipping, One for Leaf Picking.

Picks up leaves at a rate of 40 cubic yards/hour or more; An efficient, intelligent approach to big municipal jobs; Tight turning radius -- steers like an

Visit us online at www.LBXonline.com!

2011 HWP Shaving Mill

Item ID: 12756 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

‘04 JD 535 Log Loader Item ID: 12745 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Thurman Scale

Item ID: 12698 Contact: Michelle Ph: 800-315-9950 x606 www.LBXonline.com articulated machine; Rugged heavy duty construction; Simple to operate -- easy to maintain. This is a steal!! - Item ID-12650 - Tom 800-315-9950 x604 Sold­2002 Fabtek 344 Forwarder - 13,000 hours, Good shape; Engine runs good, but needs ether to start in cold temps. Does not burn oil, Loader re-bushed and pinned, Good Super grip grapple. Tires at 60%, - Item ID12699 - Tom 800-315-9950 x604 2002 KBL-28 Franklin Loader - Cummins engine, Joy stick control A/C Cab, 7500 hours - Item ID-12647 - Michelle 800315-9950 x606 2002 Moxy MT31 Articulated Dump Truck - Less than 3500 hours. Very good condition.

31 ton capacity, or carries 22 yards of material. Scania DC9 diesel engine 340hp, Cab/Heat/ AC, Automatic Transmission, tailgate, auto lube. 49,935lbs

operating weight. - Item ID12657 - Tom 800-315-9950 x604 2002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained.

Brush Cutter has less than 500 hours. Complete with winch and forestry package.

Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel.

- Item ID-12414 - Tom 800-3159950 x604 2002 Tigercat 635 Bogey Grapple Skidder - Very clean machine. 6700 hours.

Cummins 250HP. 30.5 x 32 Front Tires and 28L x 26 Tires in Rear. All at 90%. Trail Blade; Dual Arch Grapple with BIG capacity. VIN: 6350138 - Item ID-12558 - Tom 800-315-9950 x604 2002 Timbco 425D w/Fabtek Proc. Head - Very nice machine and well maintained.

11,229 hours, but only 1400 on recon Cummins engine. 24” Single Grousers.

Undercarriage is 70%. Fabtek has been rebuilt and updated to make it stronger than new.

Head works great. - Item ID12659 - Tom 800-315-9950 x604 2002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400

and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild.. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist... Main boom to stick boom pin and bushings have been replaced in a the last 3 months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 - Tom 800-3159950 x604 2002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained.

- Item ID-12194 - Daren 800-3159950 x603 2003 Cat 950 Loader w/ Log Forks - 1500 hours on new engine. Very good condition.

For Classifieds Call Your LBX REP at 1-800-315-9950

Total hours 7350. Priced to sell. - Item ID-12544 - Tom 800315-9950 x604 2003 Franklin Q70 Grapple Skidder - Model Q70-M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID12337 - Tom 800-315-9950 x604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine.

New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800315-9950 x604 2003 Hydro Ax 321 FB w/ Koehring 16” Saw - Good running unit with less than 6000 hours. 23.1 tires at 20%.

Koehring 16” Saw Head runs good. 4 cyl. Cummins Engine.

February 2013 n 21

ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors

800-248-4479

www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical

419-244-8887

‘04 Timbco 425 w/Bar Saw Head 360° Head Rotation Item ID: 12718 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Chains for 23” Tires. Hard to find units like this. Great value. S/N 7069 - Item ID-12551 - Tom 800-315-9950 x604 2004 72” CSI R72 Circle Saw - hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000 USD - Item ID-12125 - Michelle 800-3159950 x606 2004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with 22 n

3-Strand Green Chain 36’x8’ w/ Stops Item ID: 12596 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x604 2004 Cat 330C Log Loader - 14,500 hours. New undercarriage on it, rebuilt the grapple, repacked boom cylinders, put in new air ride seat, new climate control system, and a few other things. Last year we pulled the engine out and went through it and also had the pump gone through. Runs very well. Great Value! - Item ID-12686 - Tom 800-315-9950 x604 2004 Cat 535B Grapple Skidder - SIN AAE00566, 12,000 hours. Replaced center pins, repacked cylinders, and repaired hydraulic control valve for grapple. 73 x 44, 32

The Original Lumberman’s Exchange

2001 JD 650H Dozer Item ID: 12721 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com tires- Runs good. Priced to sell! - Item ID-12693 - Tom 800315-9950 x604 2004 Hood 28000 Loader with hotsaw - 72” hot saw; has 8000 hours. - Item ID-11418 Michelle 800-315-9950 x606 2004 Hydra Grind Grinder Like new. Only 78 documented hours. Cab with working AC and Heat. Cat 350HP engine.

Very well built and comes with TWO Separate mills... one for CD Waste and one for brush and small trees to make biomass. Parts still easy to get. This is a GREAT BUY if you need to grind! Totally legal load and easy to transport!

- Item ID-12648 - Tom 800-3159950 x604 2004 Hydro Ax 721E w/Rotary Ax Brush Cutter - Runs good.

This machine has JD 215HP

engine; Deere axles; 28.1 26 tires @ 70%; Heavy Duty Winch; Very clean. 6113 hours; Rotary ax mower. They have installed a new mower motor; new blade tip; ready to work.

Cab is clean no breaks dents or welds. Very good condition.

- Item ID-12631 - Tom 800-3159950 x604 2004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive.

Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID12316 - Tom 800-315-9950 x604 2004 Ponsse Ergo Harvester - 13,000 total hours 10,000 operating hours, New rollers, roller motors, all modules updated, $25,000 per year in preventative maintenance.

Pinned and bushed every two years since new. Tracks not included. - Item ID-12697 - Tom 800-315-9950 x604 2004 Prentice 384 Log Loader with CTR Delimber - 7000 hours, Cummins Engine, Machine is greased every 8 hours, and oil changed every 250 hours. - Item ID-12567 Daren 800-315-9950 x603 2004 Prentice 384 TMS Loader

Visit us online at www.LBXonline.com!

‘01 Barko 225 on 6-Wheeled Drive Carrier Item ID: 12741 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good.

Working on job today. Good condition. TN - Item ID-12171 Tom 800-315-9950 x604 2004 Tigercat 240B Log Loader on Trailer - Very clean.

One owner machine. Good maintenance. Tight and dry.

6800 hours. Cummins engine.

Loading logs now. - Item ID12617 - Tom 800-315-9950 x604 2004 Tigercat 635 Bogie Grapple Skidder - Big Capacity Long Range skidder for the big jobs! Runs good and priced to sell. 8600 hours. 35.5 Front Tires and 67 x 34 rear tires all at 50%. Machine is tight and dry. - Item ID-12615 - Tom 800315-9950 x604 2004 Tigercat 724D Feller Buncher - Only 2500 CONFIRMED hours in May. One owner who is a construction contractor that only used this machine on occasion. New engine installed in 2010. Tigercat 22” Hot Saw. 44” tires @ 70%. Real clean machine and a great buy! Item ID-12496 - Tom 800-3159950 x604 2004 Timbco 425 w Bar Saw Head - 5600 hours on this very clean machine. Timbco 33” bar saw head has 360 degree rotator for maximum production. Unit comes with 2 sets of tracks: 36” as seen on machine and 24” single

‘01 Prentice 384 w/CTR Delimber Item ID: 12743 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com grousers for aggressive climbing. Undercarriage is at 50% or better. Pumps pull well.

Cummins 260 HP engine. - Item ID-12718 - Tom 800-315-9950 x604 2004 Timberking TK560 Loader with CTR450 Delimber - 7200 hours, new knives in delimber, Complete Brand New A/C system, New Alternator, Oil Changed every 250 hours, Macine is greased every 8 hours, very tight and dry machine. WOODS READY!!

- Item ID-12483 - Daren 800-3159950 x603 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30” whole trees. Set up for æ chips. Recently came off job. Well maintained and in good condition. - Item ID-12690 - Tom 800-315-9950 x604 2005 Prentice 280 TMS - Good running machine. Hour meter shows less than 5000 hours but owner believes it to have about 7800. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market.

- Item ID-12527 - Tom 800-3159950 x604 2005 Takeuchi Supertrack Skid Steer with B74 Fecon Head 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch.

Comes with spare 80” bucket.

Half the price of new. - Item ID12413 - Tom 800-315-9950 x604 “2005 Tigercat 724D Feller Buncher - Engine only has 1800 hours since rebuild. Cold a/c. Machine has 60 percent rubber. - Item ID-12639 - Daren 800-315-9950 x603 2005 TimberPro 830 Forwarder - Super Nice TimberPro 830 Forwarder w/8 wheels. Only 5228 documented hours.

Excellent condition. Includes one set of tracks. Has 4’ Bunk Extensions; Telescopic Boom on Loader; Comes with grapple but is plumbed for harvesting head. S/N 830F0102. - Item ID-12708 - Tom 800-315-9950 x604 2005 Valmet 860.1 8-Wheeled

For Classifieds Call Your LBX REP at 1-800-315-9950

Forwarder - 13,800 hours.

New hydraulic transmission and gear box. $70,000 of updates just completed by local Valmet/Komatsu Dealer.

Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard.

- Item ID-12267 - Tom 800-3159950 x604 2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 15,200 hours. Largest of rubber tired harvesters.

Has Valmet 370.2 processing head with less than 7000 hours. Tracks included for bogeys. Has spare 370.2 head for parts. Engine runs well.

Tires at 50%. This is a hard to find gem and priced below February 2013 n 23

Financing Available

Shrink Wrap Firewood/Wastewood

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/

‘01 Multitek 2025 LDCS Firewood Proc.

Item ID: 12720 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com market. - Item ID-12569 - Tom 800-315-9950 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 7400 hours.

370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item 24 n

‘89 Ford L-9000 w/’05 Prentice 120E Item ID: 12736 Contact: Tom Ph: 800-315-9950 x604

1995 Prentice 210D

Item ID: 12652 Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

www.LBXonline.com ID-12266 - Tom 800-315-9950 x604 2005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to allow for that. Complete with computer and some spare parts. Chain size is .404 top and 3/4 bottom. No drive motors have been replaced.

All working well. One cylinder

The Original Lumberman’s Exchange

leaking slightly. He is original owner. Machine received Waratah updates by Waratah about 2 years ago. New knives.

There is a pilot filter but not an inline filter - Item ID-12420 Tom 800-315-9950 x604 2006 Barko 595 CRL Loader 40’ Live Heel for high stacking.

8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready!

Good condition. - Item ID-

12405 - Tom 800-315-9950 x604 2006 GT25 Gyro Trac Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition.

Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-3159950 x604 2006 Hood Model 182 Loader w/Circle Saw Slasher on Carrier - 2006 hood 182 with 3900 hours. Self-propelled carrier. Cab w/AC and heat and equipped with super grip handles. Continues Rotobec grapple. Tires on carrier at 85%. Includes Circle Saw slasher for complete merchandising package. Great for a wood yard! - Item ID12627 - Tom 800-315-9950 x604 2006 JD 310 Loader/Backhoe - 1762 Hours. Very nice condition. Extenda-Hoe. 4 wheel drive. Runs good. - Item ID-12464 - Tom 800-315-9950 x604 2006 JD 437C Loader with CSI Del + Bar Saw - One owner machine and very well maintained. 9800 hours.

Engine runs well and pumps pull like new. Came off job handling 50 loads/week. - Item ID-12680 - Tom 800-315-9950 x604 2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday.

- Item ID-12117 - Tom 800-3159950 x604 2006 John Deere 748GIII Dual Arch Skidder - 8900 hours.

Good condition. Working today. One owner machine.

Tight and dry. 32.5 tires at 50%. - Item ID-12542 - Tom 800315-9950 x604 2006 Morbark 6600 Horizontal Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat

Visit us online at www.LBXonline.com!

Vista

S” S O B E L “ A N G Up-Cut Saws

Reconditioned Electrical Equipment Saves You Money, Big Money!

Your solution for: • Speed and accuracy

VFD Control

• Safety—two-hand cycle control—non-exposed sawblade in its rest position-material is held firm by guard/ clamp assembly while cutting is performed

Many Items In Stock Ready for Immediate Shipment!

Manual Transfer Switch

Motor Control Starters (Solid State)

Disconnect Switch

Call Today!

Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com

Vista Machines Inc.

19 Monarch Street • Littlestown, PA 17340 Tel: (717)359-9212 • Fax: (717)359-4222 • www.angleboss.com

hours. Pitts Trailer. Rotobec continuous grapple. Runs good! - Item ID-12682 - Tom 800-315-9950 x604 2006 Valmet 890.3 Forwarder - Well maintained 20 ton forwarder by Valmet. Has 13,700 hours. Very good running condition. Front hood guard and two complete sets of tracks included. Located on West Coast. Priced to sell!

- Item ID-12709 - Tom 800-3159950 x604 2007 Bandit Model 3680 Beast Grinder - 2007 Bandit Model 3680 Beast Grinder; Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN Controls; Magnetic head Pulley; Excellent condition!

- Item ID-12628 - Tom 800-3159950 x604 2007 Cat 325D w 624 Waratah Processing Head - 7800 hours.

Combination Starter

When you need it Now— And at the Best Price!

You Need Weaver Electric

• Mitering capability: Left & Right axis rotation of sawblade up to 75o from center • Also available bevel capacity: Blade can lay over to the left up to 45o from zero • From basic manual machines to fully CNC-controlled cut-off systems

Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin - $20,000 which is half price of new. - Item ID12692 - Tom 800-315-9950 x604 2006 Prentice 384 w/ CSI 264 Delimber - 8800 hours. New Swing Motor. New Cummins Tier II engine in 2009 w/3000

Automatic Reduced Voltage Starter

All Sizes of Motors

• Ease of Operation

Call today and let the “ANGLE BOSS” help solve your production dilemmas!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Hyster 70 XL2 Forklift Item ID: 12607 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine.

- Item ID-12283 - Tom 800-3159950 x604 2007 CTR 950B Grapple Skidder - Excellent Condition.

Only 2800 hours. Single arch grapple. 28L tires at 80%. Heat/ AC/Stereo in Cab. Cummins 6 cyl. engine. Just a great value!

For Classifieds Call Your LBX REP at 1-800-315-9950

1989 Int’l Clean-up Truck w/2004 Serco 8000 Ldr. Item ID: 12601 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com CTR was owned by Prentice, and is now supported by CAT Dealers. - Item ID-12664 - Tom 800-315-9950 x604 2007 JD 1110D 6-Wheeled Forwarder - 6,222 Hours; 161 HP JD Engine; 6WD Drive; Excellent condition; Good rubber, tracks and chains optional. New bucket in March of 2012. Pre heat and AC February 2013 n 25

‘10 Tigercat 630D Grapple Skidder Item ID: 12738 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com working well. Loader is tight, center section good. Clean and ready to work. - Item ID-12706 Tom 800-315-9950 x604 2007 JD 437C wCSI 4400 Slasher Saw - Only 1800 hours.

Excellent condition. Comfort cab with heat and A/C. CSI 4400 Slasher Saw. Rotobec grapple. JD Power. Runs great.

- Item ID-12681 - Tom 800-3159950 x604 2007 Lamtrac 6125 Tracked Mulcher - NEW TRACK MULCHER W/ MAGNUM HIGH SPEED MULCHING HEAD. INCLUDES WARN WINCH & HIGH LIFT BOOM, Just 134 HRS. Lamtrac is known for putting the most oil out to the attachment for maximum performance coupled with 26 n

1996 Franklin 560 Cable Skidder Item ID: 12734 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com great operator comfort.

The 6125 will out produce standard skid steers by 30% with greater material reduction efficiency. - Item ID12672 - Tom 800-315-9950 x604 2007 Liebherr A924B Wheeled Log Loader - 10,100 hours.

Very Good Condition. Liebherr makes the highest quality heavy equipment in the world.

This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’.

Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included.

Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great

The Original Lumberman’s Exchange

‘05 TimberPro 830 Forwarder Low Hours!

Item ID: 12708 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com wood yard machine. - Item ID12503 - Tom 800-315-9950 x604 “2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs.

Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with LH rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access.

30” x 10' CAT chain infeed bed. Enclosed weatherized operator's cab is mounted on

rubber shock absorbers with combination air conditioner/ heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls.

Morbark 1000 knuckleboom loader, 25' reach, 210∫ swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10'. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID12449 - Tom 800-315-9950 x604 2007 Prentice 2432 Dual Arch Skidder - 10,070 hours. 43” Tires: 50% - 80% + spare. Dual Arch Grapple; Winch; Extra Wide Blade; New Cummins Tier II engine in 2010 w/2500 hours. New injector pump recently installed. NOTE: Comes with spare tire! - Item ID-12683 - Tom 800-315-9950 x604 2007 Prentice 2570 w Quadco 22” Saw - Just 6400 total hours.

New Cummins 190HP engine - same size as 2670. Paid $18K for new engine at 6000 hours.

Included computer. 28L x 26 tires at 60%. New Hydraulic Motor. Comfort cab with heat and AC. Runs great! - Item ID12684 - Tom 800-315-9950 x604 2007 Rayco C-87-L Crawler Mulcher - Only 2500 hours.

Very Good Condition. Runs well. Deutz 87 HP engine - Oil Cooled. Steel Tracks w/ 14” Pads. 6 track rollers. 1 carrier roller. Enclosed ROPS Cab with working Heat and Air. Attachment is Gyro Tract Model Toma Axe GT500 Planer Knife Cutter. Works Great! S/N 794429. - Item ID-12548 - Tom 800-315-9950 x604 2007 Tigercat 250 w/2011 Log Max 7000XT - 8500 hours on Tigercat. 1700 hours on 2011 Log Max 7000XT head.

New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl

Visit us online at www.LBXonline.com!

Woodbine Rapido Loco 20

Woodbine Rapido Loco

For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 27

Hosebee clamp There is nothing else like it!

A Revolutionary New Product Before Hosebee:

After Hosebee:

• You can repair a damaged hydraulic hose on the spot!

• No more down time or waiting for a new hose to be made.

Contact Marie Finlason

(334) 357-9887 www.hosebee.com

‘09 John Deere 1270D Item ID: 12733 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x604 2007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple.

Tight and ready to work. One owner machine. - Item ID12275 - Tom 800-315-9950 x604 2007 Valmet/Komatsu Model 28 n

Forest-All Mill Item ID: 12762 Contact: Michelle Ph: 800-315-9950 x606

www.LBXonline.com 911 Extreme Harvester - Only 3300 hours on this special machine. Has new Log Max 6000 just added with full warranty from Log Max. Individual tracks on each hub allow this machine to climb where NO OTHER MACHINE can go! New 700 tires and rims come with it for rubber tired operation. Recently gone through and updated. Very unique and hard to find a machine like this! Priced well below market. - Item ID-12571 -

The Original Lumberman’s Exchange

Tom 800-315-9950 x604 2008 Cat 330DFM Log Loader - 8700 hours. Very well maintained. Undercarriage at 60%. 44’ Live Heel Boom.

Continuous rotation grapple.

Regularly serviced. Hydraulic tilt cab and riser. Heat and A/C. Total forestry package.

- Item ID-12688 - Tom 800-3159950 x604 2008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils.

Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago.

Hand held remote control.

Triple chain feed deck.

Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. - Item ID-12694 - Tom 800-315-9950 x604 2008 JD 444J Wheel Loader w/

Forks - Priced Dropped!

Just over 3000 hours.

Rehandling bucket included.

Tires at 75%. Very clean and runs great. - Item ID-12658 Tom 800-315-9950 x604 2008 JD 648H Dual Arch Skidder - Very nice and good running skidder. Direct drive.

6100 hours. Dual arch grapple.

30.5 x 32 tires at 60%. Very well maintained. - Item ID12613 - Tom 800-315-9950 x604 2008 John Deere 640H Cable Skidder - Only 3300 hours.

One owner. 28L tires at 40% with chains. Just completely serviced and ready for work.

Enclosed cab with heat and AC. Hard to find! - Item ID12695 - Tom 800-315-9950 x604 2008 John Deere703JH cutto-length timber harvester/ processor with Waratah 622B harvesting head (felling,delimbing and bucking). Log-rite controller and Pro-heat. Has an

Visit us online at www.LBXonline.com!

Sawmill Exchange ‘93 Hitachi 160 w/Rolly Sling Shot Harvester Item ID: 12732 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com automatic reversing fan on engine. 24 inch double bar pads. 5800 hours. Excellent condition. - Item ID-12626 Tom 800-315-9950 x604 2008 Komatsu Model 220LL w/38’ Live Heel Boom - Only 2000 hours. Jewell purpose built Live Heel and 52” continuous grapple. 30” Double Grouser Pads: 4’ cab riser with hydraulic tilt; Cab guard; Exterior Cab Lights; Heat/AC; Running boards for easy maintenance access.

Excellent condition. Great yard machine. - Item ID-12634 Tom 800-315-9950 x604 2008 Morbark 30x36 Chipper w/Loader - Only 700 hours.

CAT C-13 engine. Excellent condition. Air Compressor.

Cab and Loader package included. Compact and easy to transport. - Item ID-12677 Tom 800-315-9950 x604 2008 Ponsse Ergo Processor w H7 Head - 2008 Ponsse Ergo, 6700 hours with H7 head.

All updates installed. Head has been rebuilt with new pins and bushing, 3 new feed motors. Good rubber with Tracks and chains optional.

Ready to work. New internal boom hoses. Pre-heater and AC in good working condition.

Ponsse center section was recently rebuilt. Ponsse uses about 35 gal of fuel/day - Item ID-12707 - Tom 800-315-9950 x604

2004 Prentice 384 Log Loader w/CTR Delimber Motivated Seller!

Item ID: 12567 Contact: Daren Ph: 800-315-9950 x603

www.LBXonline.com 2008 Timbco 425EXL with Quadco Hot Saw - 7200 hours on upper, but lower has been totally rebuilt with new CAT components and has ZERO hours. This machine has been gone through head to toe and is ready to work. Fresh hoses; New Finals; Pumps Checked; Cab spotless. Includes Fire Suppression system which lowers insurance rates.

24” single grousers. 300HP Cummins. Truly a great value and worth inspecting.

Optional heads are available if you prefer an Intermittent or bar saw head. Photos listed show before and after of car body. - Item ID-12574 - Tom 800-315-9950 x604 2008 Timbco/Valmet 445FXL - Great Price for a 2008 model in decent running condition. Used on 24 hour/ day job site with regular required maintenance. 12,230 hours. Undercarriage at 40%.

Has harvesting boom with hydraulic extension. Regular feller buncher boom can be added. - Item ID-12614 - Tom 800-315-9950 x604 2008 Valmet 840.3 Forwarder - Only 3400 hours on this SUPER CLEAN machine.

Loaded with extra options such as tracks for rear bogeys, chains for front tires, hood guard, and Valmet’s Protect hose system. 600 tires at 85%.

North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.

800-459-2148 (

)

US & Canada

www.sawmillexchange.com P.O. Box 710930 • Houston, TX 77271 Single owner wants to upgrade to larger machine. The machine is priced to sell well below market. 12 ton capacity.

Sisu engine uses only 4 gal/ hour. Only on Lumberman’s Exchange! - Item ID-12643 Tom 800-315-9950 x604 2009 Bandit 3680 Beast Recycler - Like New Grinder with only 740 hours. CAT C-18 Diesel with 700HP. 42” diameter cut radius x 63” wide cuttermill. Mill opening is 35” high x 60” wide. Standard specs available upon request.

Optional HP600 Twin disc fluid clutch with high drives.

Height adjustable discharge.

Reversing engine fan option.

Owner shut down job and wants to sell. - Item ID-12714 Tom 800-315-9950 x604 2009 Fecon FTX440 w/Fecon BH 350 Mulcher - 1670 hours.

Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent

For Classifieds Call Your LBX REP at 1-800-315-9950

condition. Priced to sell! - Item ID-12632 - Tom 800-315-9950 x604 2009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine.

Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine runs strong with no blow by. Machine is tight and dry.

Ready to work today - Item ID12530 - Tom 800-315-9950 x604 2009 TimberPro 630 Harvester - Only 3000 hours on this super clean machine! No Attachment. Used for pipe line clearing. Job now over.

Tracks for bogeys. Can accept grapple saw or new fixed processing head. - Item ID12656 - Tom 800-315-9950 x604 2010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of February 2013 n 29

‘98 Franklin 170 Cable Skidder Item ID: 12735 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

ways or pipelines. Excellent condition. Super value. - Item ID-12501 - Tom 800-315-9950 x604 2010 CAT 564 Forwarder Super Clean 15 ton capacity forwarder with only 1980 hours. 6 wheeled with rear bogeys. Tracks included.

Very well maintained. Cat 6.6 ACERT engine with 173HP. Total machine weight = 36,000 lbs. 28L x 26 front tires at 85%. 700/50 x 26.5 rear bogey 30 n

tires at 90%. IQAN control system. Electric Power Shift transmission 4/4. Max speed 14.5 MPH. - Item ID-12576 Tom 800-315-9950 x604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head - Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads at 95%. Like New! - Item ID-12633 - Tom 800-315-9950 x604 2010 JD 748H Grapple Skidder

The Original Lumberman’s Exchange

- Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID12282 - Tom 800-315-9950 x604 2010 Morbark 40 x 36 Drum Chipper - 2400 hours on this well maintained chipper. 600 HP John Deere engine with 10 year warranty. Excellent Condition. Chip prices have dropped so owner is selling.

Great price! - Item ID-12540 Tom 800-315-9950 x604 2010 Prentice 2670 w/Single Post Saw Head. - Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head. Great Value! - Item ID-12552 - Tom 800-315-9950 x604 2010 Woodsman 440TL Tracked Chipper w/Loader ONLY 1700 hours. Contractor finished job. Operator controls entire operation from cab.

700 HP Cummins engine.

50” mill. High flotation 36” triple grouser pads on 80% undercarriage. Super Package.

Sold new at over $500,000.

- Item ID-12665 - Tom 800-3159950 x604 2011 Builtrite Model 60 Stationary Loader - Model 60 Builtrite Stationary Electric Loader. New Condition with only 95 actual hours. The Model 60 has 18' of reach

‘04 45’ Battle Wagon Trailer Item ID: 12592 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com and about 1,100 pounds of lift at full reach, with the grapple attached. The grapple is a º cord, butt styled with gripping bars. It opens to 66” and is 20” wide. This package includes everything from the power pack to the comfort cab with head and AC. If you have a loading challenge in your operation, this is an economical and quiet way to handle it. - Item ID-12705 - Tom 800-315-9950 x604 2011 Fecon FTX100 w/ a BH74ssv mulcher head - 43 Hours. Should have factory warranty remaining. Treat as ‘NEW’. Comfort cab with Heat/ AC. 100HP Cummins engine.

Total mulching package.

Includes Fecon BH74 mulching head with 6’ cutting width.

Priced well below dealer cost.

- Item ID-12675 - Tom 800-3159950 x604 2011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x604 2011 Peterson 4710 Tracked Grinder - Like new! Only 974 hours. Cat 750HP engine.

Hi Flotation tracks. Remote controlled. Top quality grinder...great production.

- Item ID-12666 - Tom 800-3159950 x604 2011 Remanufactured KMC

Visit us online at www.LBXonline.com!

To find the nearest dealer call:

(888) 820-3962 For Classifieds Call Your LBX REP at 1-800-315-9950

February 2013 n 31

‘12 Refurb FMC 210 Tracked Skidder Item ID: 12731 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Best in forest.

Best in class.

No matter your project size, Fecon’s durable Bull Hog® mulchers are up to the job. For 20 years, we’ve made your tough tasks easier – from trail maintenance and vegetation management to clearing for utilities and national pipelines. See how your Bull Hog® can boost productivity.

800.528.3113

Tracked Grapple Skidder Model #42 KMC Model 2500P ( Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission.

John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air 32 n

fecon.com

Conditioning, Lights, Swivel Suspension seat c/w Joystick Controls. - Pilot operated closed center Hydraulics.

Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve - New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty Cast Steel KMC Road/Idler Wheels.

Standard Decking Blade. FOB: BC, Canada INCLUDES ONE

The Original Lumberman’s Exchange

YEAR LIMITED WARRANTY!!

- Item ID-12549 - Tom 800-3159950 x604 260c Ford Industrial Tractor w/disc mower attached. Has new Agriculture wheels, tires, and tubes w/fluid. This is a 65 PTO HP tractor with Ford 4 speed high and low range w/reverse Transmission. Has minor hydraulic leak off but works good w/engine running just leaks down slowly. Works

‘06 Valmet 890.3 Forwarder 20-Ton Capacity!

Item ID: 12709 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com great otherwise and starts easily everytime. - Item ID12723 - Michelle 800-315-9950 x606 40’ Finch tri-axle Log Trailer 18 bunks, tires are road ready, everything works on the trailer. - Item ID-12505 - Daren 800-315-9950 x603 45’ Log Trailer - spring suspension, tires are in good shape 6 sets of bunks and a headache rack - Item ID-12587 Daren 800-315-9950 x603 45’ Tri-axle Log Trailer with Prentice 120 loader - 9 bunks, brakes and tires are road ready. - Item ID-12506 - Daren 800-315-9950 x603 Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber.

130-hp, all pins are good. Item ID-12202 - Daren 800-315-

Visit us online at www.LBXonline.com!

Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs!

Item ID: 12647 Contact: Michelle 800.315.9950 Ext. 606 www.LBXonline.com 9950 x603 Caterpillar 225LC Shear Excavator - 4226 hours, Undecarriage is in GOOD Condition, Machine is WOODS ready. - Item ID-12517 Michelle 800-315-9950 x606 Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603 Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603 Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603 Dorsey Drop Deck Trailer - 45’ Long. Heavy Duty Ramps.

Good Michelin Tires. Currently in use and has carried (2) Cat 518 skidders with no problem - Item ID-12662 - Tom 800-3159950 x604 Euclid Dump Truck Model R-13 - Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603 Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape.

It was being used to grind

‘87 Cleereman Priced 38 Mill

Item ID: 12579 to SELL Contact: Daren FAST!!

Ph: 800-315-9950 x603 www.LBXonline.com green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x606 Hydro Ax 670 Feller Buncher w/saw head - NEW Engine with less than 30 hours on it, New Pins and Bushings, New Hydrostatic Drives, New Saw Drives, Pressure has recently been checked and adjusted, NEW Windshield, Firestone 30.5 tires 1-new and the other 3 are 55% - Item ID-12566 Daren 800-315-9950 x603 John Deere 440B Cable Skidder - has had new repower engine works fine ready to skid wood new seat syncro range transmission not power shift. Tires 16/9-30 - Item ID12644 - Michelle 800-315-9950 x606 Morgan 4 head Resaw - 3 phase 480V, belt driven, running daily. - Item ID-12553 Daren 800-315-9950 x603 Pair of 1987 JD 648 Grapple Skidders - Skidder A has new JD engine from 2 years ago. Starts easy. Also has rebuilt transmission from JD Dealer. Two tires missing from Machine A but it has all the rims. Structurally sound.

Machine B has rebuilt engine.

Both units have grapples and heavy duty winches.

Components can be combined

Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

Call (423) 698-0284 CORLEY mfg

2002 KBL-28 Franklin Loader

www.corleymfg.com • sales@corleymfg.com

to make one very strong skidder and have spare parts for support. Between both machines, there are 8 riims and 4 28L x 26 tires. Great price! - Item ID-12560 - Tom 800-315-9950 x604 Timberjack 450B single arch grapple skidder w/winch Timberjack 450B single arch grapple skidder w/winch, 1409 hours, tires are at 50% +/-, Center pins are tight, Ready for the WOODS!! - Item ID12511 - Michelle 800-315-9950 x606 Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition.

Grapple or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 Tom 800-315-9950 x604 WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder that you would like to sell, please call

For Classifieds Call Your LBX REP at 1-800-315-9950

to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x604

MISCELLANEOUS Thurman Scale - thurman 60’ by 10’ above ground scale,model 8530 60 ton capacity.Including all electrical controls and monitor - Item ID12698 - Michelle 800-315-9950 x606

MOULDERS ’93 Pinheiro Moulder Planer - 5 heads model 600/5, approx.

100 hours, Max capacity 6”x18”, Bottom motor 12hp, top motor 18hp, feed 3hp, side motor 9hp, Used for Log siding and crown moulding.

- Item ID-12554 - Daren 800-3159950 x603

PALLET MACHINERY 2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005.

One owner. - Item ID-12108 February 2013 n 33

PLANERS

Safety� Safe Durable� Durable

Comin gS 4 New oon Mode ls

TheFirewood FirewoodFactory� Factory The ™�

Beaver Model 16 ™�

Coming Soon els

4

Reliable� Reliable� Reliable

Convenience� Convenient

Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood from 12” to 24” lengths • Splitter cycle time 4.5 seconds Starting at • PTO driven $ Beaver Model 18 • Honda Engine GX-630 630cc

Made in the USA

New Mod

8995 Optional Features Availale

Call Toll Free

Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net Safety�

Durable�

Reliable� Reliable�

™�

Convenience�

‘03 Hydro Ax 670: Only 1700 Original Hrs!

West Salem Grinder & Gen Set WSM 2822

Item ID: 12729 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

www.LBXonline.com

Daren 800-315-9950 x603 Smart Bandsaw Dismantler 64” table. Two-man operation.

Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor.

Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured

by Smart Products. - Item ID11066 - Michelle 800-315-9950 x606 Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind 34 n

Item ID: 12386 Contact: Daren 800.315.9950 Ext. 603

wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder.

This machine is equipped

The Original Lumberman’s Exchange

‘11 Built-Rite 60 Stationary Ldr Nice Package!

Item ID: 12705 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet.

This is a very nice clean unit and would work ideally for many grinding applications.

- Item ID-12011 - Daren 800-3159950 x603

Buss 24x8 planer Model H - Buss 24x8 planer Model H - Item ID-12609 - Michelle 800315-9950 x606 Yates American Planer - Yates American Planer, model# 820™� 12, infeed deck, duct work to main line included, pineapple roller feed, currently up and running - Item ID-12556 - Daren 800-315-9950 x603

PORTABLE SAWMILL Timber Harvester HD-30 powered by a 25-hp Kohler gas engine. It is a 2005 year model with approximately 400 hours.

Runs great and comes with 2 boxes of blades - Item ID-12009 - Michelle 800-315-9950 x606

RECYCLING EQUIPMENT 2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID11830 - Michelle 800-315-9950 x606 2006 W. S. M Brute Horizontal Grinder - Model 3456HB. This is a tier 2 machine and meets all current California emission standards. Equipped with a Cat 540 horse power C-15 diesel engine. This unit has been serviced and well maintained. It has approximately 8700 hours.

The clutch and electronic brain have been recently replaced. Located in CA. Priced to sell!! - Item ID-12691 Tom 800-315-9950 x604 1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard

Visit us online at www.LBXonline.com!

Integrity • Precision • Quality • Value

Woodmaster ‘05 Western Star w/’09 Lemco 75XLT Loader

2009 Bandit 3680 Beast Recycler Like new!

Item ID: 12598 Contact: Daren 800.315.9950 Ext. 603

Item ID: 12714 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 Daren 800-315-9950 x603 1988 Morbark 27 RXL Whole Tree Chipper - Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!!

- Item ID-12519 - Michelle 800315-9950 x606 1993 Morbark 30/36 Drum Chipper with Cab and Loader - 1993 Morbark 30/36 Drum Chipper with Cab and Loader, Cat 330hp, fire suppression system, new hydraulic hoses, come with approx. 12 sets of knives. - Item ID-12716 - Daren 800-315-9950 x603 1993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%.

Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604 1999 CBI Model 4800 Grinder 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; 656 HP Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-

See why we are your Best Source for bandsaw blades!

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

Thin Kerf

www.LBXonline.com 9950 x604 2000 Morbark 23 NCL Chipper - 5,000 Hours, Rack ran on Cat engine, New pendant and tether, new roller planetaries and motors and new both pumps, New anvil, knife holders and counter knives, New drive belts, throat freshly rebuilt. New tires, disk bearings replaced and repacked with grease.

Nice condition. Nearly total recondition done 300 hours ago - Item ID-12701 - Tom 800315-9950 x604 2002 Dynamic Chipping/Leaf Collection System - Brand new but without warranty.

185 HP Cat Engine. HeavyDuty Mlti-Task Prime Carrier; Hydrostatic 4 - Wheel Drive; Year-round utility. INCLUDES TWO DRUMS: One for Chipping, One for Leaf Picking.

Picks up leaves at a rate of 40 cubic yards/hour or more; An efficient, intelligent approach to big municipal jobs; Tight turning radius -- steers like an articulated machine; Rugged heavy duty construction; Simple to operate -- easy to maintain. This is a steal!! - Item ID-12650 - Tom 800-315-9950 x604 2004 Hydra Grind Grinder Like new. Only 78 documented hours. Cab with working AC and Heat. Cat 350HP engine.

Very well built and comes

Band Saw Blades Ask About Our Dismanteling Blades

ck Cheut Our O

1-888-857-5153

Quality • Our Service • Our Price

with TWO Separate mills... one for CD Waste and one for brush and small trees to make biomass. Parts still easy to get. This is a GREAT BUY if you need to grind! Totally legal load and easy to transport!

- Item ID-12648 - Tom 800-3159950 x604 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30” whole trees. Set up for æ chips. Recently came off job. Well maintained and in good condition. - Item ID-12690 - Tom 800-315-9950 x604 2006 Morbark 6600 Horizontal Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42”

For Classifieds Call Your LBX REP at 1-800-315-9950

X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin - $20,000 which is half price of new. - Item ID12692 - Tom 800-315-9950 x604 2007 Bandit Model 3680 Beast Grinder - Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN February 2013 n 35

Why? • We use only the highest quality nickel alloy steel • NEW state of the art CNC milling centers for perfect pocket geometry • 100 + years of combined hammering and manufacturing experience • Proudly made in the USA • Stock to 10 days on standard sizes • Nations largest distributor/manufacturer of saws and knives

CALL 800-862-4544 Locations in • Hampden, ME • Meridian, MS • Florence, SC • West Monroe, LA www.usblades.net 36 n

The Original Lumberman’s Exchange

Controls; Magnetic head Pulley; Excellent condition! Item ID-12628 - Tom 800-315-9950 x604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs.

Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition.

S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with LH rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30” x 10' CAT chain infeed bed. Enclosed weatherized operator's cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport.

Six-way adjustable seat and joystick controls. Morbark 1000 knuckleboom loader, 25' reach, 210∫ swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10'.

OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID-12449 - Tom 800-315-9950 x604 2007 Rayco C-87-L Crawler Mulcher - Only 2500 hours.

Very Good Condition. Runs well. Deutz 87 HP engine Oil Cooled. Steel Tracks w/ 14” Pads. 6 track rollers. 1 carrier roller. Enclosed ROPS Cab with working Heat and Air. Attachment is Gyro Tract Model Toma Axe GT500 Planer Knife Cutter. Works Great! S/N 794429. Item ID-12548 - Tom 800-315-9950 x604 2008 Dynamic 585 Cone Head Chipper - S/N 5019.

John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. - Item ID12694 - Tom 800-315-9950 x604 2009 Bandit 3680 Beast Recycler - Like New Grinder with only 740 hours. CAT C-18 Diesel with 700HP. 42” diameter cut radius x 63” wide cuttermill. Mill opening is 35” high x 60” wide. Standard specs available upon request. Optional HP600 Twin disc fluid clutch with high drives. Height adjustable discharge. Reversing engine fan option. Owner shut down job and wants to sell. - Item ID-12714 - Tom 800-315-9950 x604 2009 Fecon FTX440 w/Fecon BH 350 Mulcher - 2009 Fecon FTX440 w/Fecon BH 350 Mulcher; 1670 hours.

Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell!

- Item ID-12632 - Tom 800-315-9950 x604 2010 Bandit 2400 Tracked Disc Chipper - 1433 Hours.

700HP. Very clean unit to make paper quality chips.

Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID12501 - Tom 800-315-9950 x604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Visit us online at www.LBXonline.com!

Heavy Duty Forks At Big Savings 1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair 2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $835.00 pair 2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair 2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,205.00 pair 2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,365.00 pair 2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,500.00 pair 3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . $2,495.00 pair 3” thick x 7” wide x 72” long . . . . . . . . . . . . . . . . . . . . $2,825.00 pair 3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,530.00 pair

‘02 Woodmizer LT300

Item ID: 12674 Contact: Daren Ph: 800-315-9950 x603 www.LBXonline.com Head - 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head; Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads at 95%. Like New! - Item ID-12633 - Tom 800315-9950 x604 Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape.

It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x606

ROLLING STOCK 1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

3-1/2” thick x 8” wide x 60” long . . . . . . . $3,595.00 pair 3-1/2” thick x 8” wide x 72” long . . . . . . . $3,990.00 pair 3-1/2” thick x 8” wide x 96” long . . . . . . . $5,025.00 pair Also, 4”, 5”, 6” thick forks to 168” long.

■ In Stock ■ Same Day Shipment ■ Let Us Quote Your

Special Design Forks.

Very Competitive Pricing.

Made from one piece of steel - not welded. Quality recognized world wide.

Bay Equipment Co. / (616) 392-1811 P.O. Box 1919 / Holland, Mich. 49422 • Fax (616) 392-6238

email: bay.eq.co@gmail.com • www.bayequipmentco.com

‘97 Cat 515 Grapple Skidder Runs Good!

Item ID: 12712 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com leaks. Parts truck available.

Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor

1999 Hyundai Robex 180 LC-3 Excavator Item ID: 12722 Contact: Michelle Ph: 800-315-9950 x606

www.LBXonline.com leaks. will take offers! - Item ID11796 - Michelle 800-315-9950 x606 1989 International Clean Up Truck with a 2004 Serco 8000 Extenda boom Loader, 466,021 miles - Item ID-12601 - Daren 800-315-9950 x603 1997 Ford L9000 Log truck, 425hp cat engine, 260,000 miles, 8LL Trans., 46 rears, double frame, 28ft Log Bed with 4 sets of bunks - Item

For Classifieds Call Your LBX REP at 1-800-315-9950

Williams 200hp Hammermill Grinder 350 Hog Item ID: 12011 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com ID-12602 - Daren 800-315-9950 x603 1997 Ford Tree Trimming Truck - 99,572 miles, Altec Boom, 5364 hours - Item ID12605 - Michelle 800-315-9950 x606 1997 Western Star Semi 160,000 New Engine, 475 Hp Cat, 18 speed Transmission - Item ID-12599 - Daren 800-3159950 x603 February 2013 n 37

presents presents

LOGGING, CONSTRUCTION, TRUCKING LOGGING, CONSTRUCTION, & HEAVY EQUIPMENT TRUCKING EXPO & HEAVY EQUIPMENT EXPO

Sustaining the Future Sustaining the Future FEBRUARY 21, 22, 23, 2013 FEBRUARY 21, 22, 23, 2013

LANE COUNTY CONVENTION CENTER & FAIRGROUNDS - EUGENE, OR LANE COUNTYFeaturing CONVENTION CENTER & FAIRGROUNDS Large Outside and Inside Equipment Exhibits- EUGENE, OR Wednesday Evening OLC Pre-Registration Meet & Greet and Oregon Women In Timber Fund Featuring Large Outside and Inside Equipment Exhibits Raiser Auction • Hosted Breakfast Included with Registration • Attend Educational Panels & Wednesday Evening OLC Pre-Registration Meet & Greet and Oregon Women In Timber Fund Seminars & Earn Professional Logger Credits • OLC Famous Sawdust Bowl Raiser Auction • Hosted Breakfast Included with Registration • Attend Educational Panels & Friday Evening 75th Anniversary Celebration Party • Log Loader Competition Seminars & Earn Professional Logger Credits • OLC Famous Sawdust Bowl Hospitality Parties Hosted by Equipment Dealers Friday Evening 75th Anniversary Celebration Party • Log Loader Competition Hospitality Parties Hosted by Equipment Dealers

Host Hotel: Eugene Hilton. For reservations call 541-342-2000 ForHotel: more Eugene information callFor thereservations OLC office atcall 541-686-9191 Host Hilton.

541-342-2000 For more information call the OLC office at 541-686-9191 38 n

www.oregonloggingconference.com The Original Lumberman’s Exchange Visit us online at www.LBXonline.com! www.oregonloggingconference.com

1996 Bell Ultra “T” on Tracks 30” Dangle Head Item ID: 12622 Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com 2001 Sterling Clean Up Truck with a Serco Loader - 190,000 miles, - Item ID-12600 - Daren 800-315-9950 x603 2004 45’ Battle Wagon trailer tires are in good shape, 6 sets of bunks and a headache rack - Item ID-12592 - Daren 800-3159950 x603 2005 Kenworth T-800 with Rotobec MT27 Loader, One Owner Truck, 110,000 miles, 8LL Trans, 46,000 lb rears, Full locking rears, Factory double frame, 430hp engine - Item ID12612 - Michelle 800-315-9950 x606 2005 Western Star with a 2009 Lemco 75XLT Loader - 120,000 miles, 475 hp cat engine, 18 speed trans., 46000lb rears - Item ID-12598 - Daren 800-3159950 x603 2009 Peterbuilt Clean Up Truck with a 2009 Serco 8500 extenda boom Loader - PW, PL, Leather interior, Wood Grain dash, 576,990 miles Item ID-12597 - Daren 800-3159950 x603 Several Timberjack Rear ends will fit models 450, 360, 460, 380 - These axles are priced cheap and we can bundle them if needed. - Item ID-12603 - Daren 800-315-9950 x603 Variety of Storm Clean Up Pup Trailers - several to choose from prices range from $8000 to 28,000 - Item ID-12595 Daren 800-315-9950 x603

‘95 CAT D4H LGP w/Swing Grapple

Item ID: 12663 Contact: Daren 800.315.9950 Ext. 603 www.LBXonline.com

SAWMILL 1984 Lane Model 8400 Saw Mill - Heavy duty four 14' (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame. Surprisingly good condition! Great Value at this price!! - Item ID-12689 - Tom 800-315-9950 x604 1986 Cleereman 40” sawmill mill has been idle for 5 years, it includes Cab, Bar turner, Husk frame with top saw, rail and feedworks - Item ID-12582 - Daren 800-315-9950 x603 1987 Cleereman Mill - newer dogs and head blocks. This is a complete mill and was running 20,000 board feet per day when it was shut down. It does have a 6 blade edger that could go with the mill as well at an additional cost. - Item ID-12579 - Daren 800-315-9950 x603 1998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50 series Detroit power unit; Fully automatic; Cab a/c ; Live deck 30 ft; 1 live off bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! - Item ID-12461 - Tom 800-315-9950 x604

Bliss Pellet Mill Turns dust to pellets!

Item ID: 12717 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 2001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 Daren 800-315-9950 x603 2002 Wood-mizer LT300 - this mill is in very good condition and is currently up and running. - Item ID-12674 - Daren 800-315-9950 x603 2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all.

Machine runs great. Owner lost contract. This machine makes great animal bedding.

- Item ID-12284 - Tom 800-3159950 x604 2012 D&L swing blade circular sawmill - Mill is powered by a 30 hp kohler engine with a 20’’circular blade with six carbide teeth that can cut verticle and horizontal. Mill is portable which runs on a track. Also have blade sharpener and slabbing attachment with a 60’’chainsaw bar for slabbing huge logs. Mill has less than 100 hours on it. - Item ID-12673 - Daren 800-315-9950 x603

For Classifieds Call Your LBX REP at 1-800-315-9950

2004 Ponsse Ergo Harvester Item ID: 12697 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com Bliss Pellet Mill (3 Available) Total of 3 top of the line Bliss Pellet Mills available. Each with twin 250HP motors for 500 total HP. One mill was never put into production.

The other two were pulled out of production in the fall of 2012. All in excellent working condition. Price is for one unused Bliss mill. Call Lumberman’s for quote on all three units or one of the used Bliss Pellet Mills. Includes many spare parts. Super value!

- Item ID-12717 - Tom 800-3159950 x604

SHAVING EQUIPMENT 1988 Jackson Shaving Mill Model 1-13137-D-30, Hydraulic moving box, 50hp motor running heads, 2 heads 4 knives per head with cartridge blades, bottom discharge conveyor, 3 phase 480V. - Item ID-12555 - Daren 800-315-9950 x603

TRANSFER DECKS 30’ long 3 strand green chain - Item ID-12586 - Daren 800-3159950 x603 36’ x 8’ 3-strand Green chain with stops - 2hp 3phase electric motor - Item ID-12596 Daren 800-315-9950 x603 42’ x 8’ green chain - 42’ x 8’ green chain with drives included - Item ID-12593 Daren 800-315-9950 x603 80’ x 8’ 3 strand green chain with drive included - 80’ x 8’ 3 strand green chain with drive included - Item ID-12590 Daren 800-315-9950 x603 February 2013 n 39

The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

  

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

6 B-6 k c ly Tra Dol t w r Ne spo ran T with

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376