Lumbermens March 2023 Magazine

BEAT BANDSAW WORK EVERY TIME WITH THE ULTIMATE PORTABLE

BLADES LAST FOR YEARS

REDUCES HANDLING LUMBER

SIMPLE TO LEARN & OPERATE

TAKES ON ANY DIAMETER LOG

CUTS LOGS INTO LUMBER FASTER

CUTS STRAIGHT LUMBER RELIABLY

FAST, SAFE, EFFICIENT & ACCURATE

PRODUCES VALUABLE BY-PRODUCT CHIPS

Contact: Austin

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

MANUAL MILLS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

MILLING MADE EASY

but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

FIREWOOD PROCESSORS

Turbosawmill make the world’s premier automated sawmill, available right across the US.

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

We utilize proven swing-blade technology to help every customer save time and money, and to always get the best cut lumber.

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

Item ID 13694. Sam x702

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams (888) 401-6367 x701

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

• Wedge and splitter design to suit your needs

• 24 to 72 ton splitting capability

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

• The fastest splitting cycle time

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

Facts to consider:

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

775 B

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

capacity!. Item ID 13421. Sam x702

1995 Barko

Feller Buncher

‘95 John Deere C6

2019 Cord King Line-up

Since

Send

blades and 1 spare 36" blade), short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop and loader to drop logs onto carriage, heavy duty log turner under log stop and loader to deal with big logs onto

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers carriage turners, carriage

The Lumberman's

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

is published

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing

CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, and printing material contained within. We shall not be liable for omissions or typographical errors.

CABLE SKIDDERS

1997 TIMBERJACK 240C

1997 Timberjack 240C with powershift transmission, hard to find skidder that still has low hours on it, only around 6500 original hours. Has gearmatic winch, good pins and bushings, and no bad leaks anywhere. Call for more info.

Item ID 100096. Austin x703

JOHN DEERE 440C'S PACKAGE DEAL

4BT Cummins engine with 1000 hours on it. New brakes New tires on back New parking brake Tight center section Really tight skidder for the age. Also Comes with another set of 23.1 tires and a brand new set of chains.

Item ID 100087. Austin x703

97' TIMBERJACK 240C

Contact: J Williams

more info.

Ph: (888) 401-6367 x701

Item ID 100074. Austin x703

97' JOHN DEERE 640G

1997 model John Deere 640G, pulling wood daily, has new rearend, new center section, and new hydraulic pump in it. Motors been done couple years ago, call for more info.

4200 original hours, enclosed cab with heat/air, strong winch. Undercarriage is around 80%. Working until sold.

Item ID 100015. Austin x703

JOHN DEERE 650H

‘95 John Deere C6 Tree Farmer

Item ID: 13920

13428

Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily. The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

Item ID 100094. Austin x703

2014 JOHN DEERE 640H

2014 Model John Deere

1997 Timberjack 240C has freshly rebuilt 4BT cummins engine with 50 hours on it, as well as rebuilt 4 speed new process transmission. Comes with 23.1 tires at around 50%. Call for more info.

Item ID 100076. Austin x703

84' JOHN DEERE 440C

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073

640H cable skidder with 1300 original hours, skidder is in mint condition, its a one owner machine, excellent rubber, tight, and clean as a whistle. Call for more information.

Contact: Austin

Item ID 100091. Austin x703

Ph: (888) 401-6367 x703

79' TIMBERJACK 225D

79’ Timberjack 225d Has new

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Item ID: JW-986495

Contact: J Williams

1984 John Deere 440C has freshly rebuilt engine, tight pins and bushings, as well as all new hoses. No leaks, woods ready skidder. Call for more info.

Ph: (888) 401-6367 x701

Item ID 100075. Austin x703

84' JOHN DEERE 540B

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

1984 John Deere 540B just had the winch completely rebuilt, no motor or trans work recently, but both are strong and don't bur any oil. Call for

-Small manufacturer in PA has made the best valued log splitter.

Item ID 100070. Austin x703

‘13 KMC 2500 Track Skidder

CAT 518 CABLE

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Early 90's Cat 518 cable skidder, has cat winch, and cat motor in it in good shape. Tight center section, no leaks on it. Comes with decals if interested. Serial number is 94U model. Tires are size 34.5. Woods ready.

Sam x702

Item ID 33681. Austin x703

DOZERS WITH WINCHES

JOHN DEERE 750K

2014 model John Deere 750K currently has 3700 hours on it, equipped with winch, screens, limb risers. Undercarriage is 60%, well maintained, clean cab, good heat/ac. Call for more info.

Item ID 100053. Austin x703

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

JOHN DEERE 750J

LOGGING EQUIPMENT BANDIT

2011 John Deere 750J has

Contact: Austin

Ph: (888) 401-6367 x703

2003 John Deere 650H has around 8000 frame hours, Undercarriage is around 60%, has full forestry package with winch. Dozer was never logged with until this past year.

Item ID 99876. Austin x703

capacity!. Item ID 13421. Sam x702

JOHN DEERE 650G

BARKO

90's model John Deere 650G Long Track Full forestry Dozer with winch. undercarriage is at about 80%. Call for more information

Item ID 99852. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

DYNAMIC CHIPPERS

13238. Chris x700

PRECISION HUSKY CHIPPER

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

They put it to work, bought brand new in 2013 -66 inch -8 knife -Bottom discharge -Extra parts come with it (worth about $5,000) -Owner is done with project and so selling it -Machine is as good as new, everything works on it.

Item ID 100116. Joe x709

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Victory Ln. // PO Box 124 Adams Center, NY 13606

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

250-563-8899

Prince George, Canada

BANDIT GRINDER - CHIPPER

PRICE REDUCED $165,000

This is a 2017 Bandit 3680 875 hp CAT bought it new 10-17 it has 1000hrs+\- Still running it some. It has the new design 30 tooth mill and also had a new tail shaft and new anvil and gate. Also has a set of 3” baffled screens for it that only have about 30hrs on them. This is a strong tier 2 machine owner operated they are selling because they upgraded to a 1200hp machine, there is nothing wrong with this machine and

it is ready to work! If sold they can transport anywhere in Florida or to the FL state line to reduce transportation cost for the buyer. You won’t find a grinder in this good of shape anywhere. Item ID 72593. Austin x703

FELLER BUNCHERS

08' JD 843J ($49.5K)

4 Brand new tires, 28L’s -Enclosed CAB -Center section is tight, too -A/C - Heat works no problem -2yrs owner, getting out of logging, going a different route -Cutter is ready

to go to work, tight machine -Everything works as it should, really, really good cutter

Item ID 100122. Joe x709

13' JOHN DEERE 643K

‘83

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

2013 John Deere 643K with 6300 original hours, joystick control. Cab has heat/air, tires have good tread at 30.5 size. Cutter is in excellent shape, well maintained. Call for more info.

Ph: (888) 401-6367 x701

Item ID 100115. Austin x703

07' TIMBCO 445EXL

2007 Timbco 445 Exl with 8000 original hours, cutter

has new chains, and sprockets. UC is around 80%. Barsaw Head will rotate 45 degrees, but is plumbed for 360 degree rotation. Cutter is in great shape and is woods ready. Call for more info

‘93

180B

‘13

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Item ID: 14077

Item ID 100104. Austin x703

Contact: Austin

Ph: (888) 401-6367 x703

15' TIGERCAT 724G

2015 Tigercat 724G has 8500 original hours, has the big hardwood head on it, cutter has been well maintained and is turn key ready. Call for more info.

Item ID 100101. Austin x703

96' CAT 312 TRACK BUNCHER

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1996’ Cat 312 Feller Buncher with Timbco head. Buncher has 8000 original hours with no oil leaks. Tracks are good, head was re-bearinged, with new bushings. Rails 95% on one side, 40% on the other. Brand new AC unit and has good heat. Complete service was just completed 20 hours ago. Also Comes with 24” bucket. Call for more info.

Item ID 100088. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

John Deere 4850

Barko

KMC 2500 Track

'05 JD 643H ($29.5K)

Hours Meter Reading: 8324

-John Deere bunching head

“Precision Under Pressure”

-Tires size: 28L-26 Tires -A/C - heat both work good -Center section is tight -Pins & bushings are good -It has a new saw disk -Kept really, really well. Good cutter.

Item ID 100072. Joe x709

TIMBCO 425C

2003 Timbco 425C has around 10900 frame hours, new teeth for the head, 8.3 cummins motor, one side final drive has been replaced, the other side

one final drive is a little weak, still running fine but starting to show some wear. Overall buncher is in good shape. Call for more info.

Item ID 100028. Austin x703

CAT 563C

2016 Cat 563C Has right around 6400 frame hours Joystick control New style bunching head In great shape everything works like it should.

Item ID 99970. Austin x703

445B

98’ Timbco 445B auto leveling,

new undercarriage, has hot saw head, and new 8.3 cummins engine in it. Head is in good shape, no cracks in the disc, and new teeth.

Item ID 99934. Austin x703

Everything is tight and dry.

Item ID 99917. Austin x703

14' TIGERCAT 720E

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘16 Halverson H140 Skidsteer (DEMO)

JOHN DEERE 753J

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

2014 John Deere 753j buncher well maintained. 10,826hrs great shape undercarriage at 50% Main boom and stick boom have been updated with strengthening plates 1,000hrs ago. New Stickboom cylinder. Heads is in good shape.

well built processor. Item ID 13820.

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

2014 Tigercat 720E has 10000 frame hours, and new reman motor with 150 hours on it, with receipts. Cutter is tight, dry, and a clean machine inside and out. Also has new style joysticks and new saw pump. Needs nothing to get in the woods.

Item ID 99916. Austin x703

JOHN DEERE 643K

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

2012 John Deere 643K with 6500 hours just had new cutting edge installed. This cutter has been garage kept half of its life and is very clean inside and out, meticulously maintained with absolutely no issues. Comes with brand new 43" wide tires for front axle, along with good 28L tires with original rims. Call for more pics and info.

capacity!. Item ID 13421. Sam x702

BARKO

Item ID 99905. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

JOHN DEERE 753J

2013 John Deere 753J

Feller Buncher with a FR21B Felling Head. It has 8500 hours, runs and starts good, resealed gear box, strong hydraulics and drive, new saw pump. Boom has tight pins and bushings, Bigfoot undercarriage will need to be replaced soon, and will also need a new saw disc soon. It has 24" single grouser pads. grab arms are in good working order. Heat, air conditioning, & lights all work.

Item ID 99902. Austin x703

JOHN DEEERE 643G

1996 model John Deere 643G feller buncher its a one owner machine, has good hydraulics, it starts, runs, and cuts as it should. Call for more info.

Item ID 99897. Austin x703

ac. Frame hours are right at 10,000.

Item ID 99879. Austin x703

JOHN DEERE 643K

2013 model John Deere 643K currently has 8600 hours on it, buncher is tight and dry, with no leaks or blow by. Averaging 30-40 loads a week. Call for more info.

Item ID 99866. Austin x703

BELL ULTRA T

1997 Bell Ultra T has new Deutz engine in it with 15 hours on it. Tracks and undercarriage are in excellent condition. Cab has AC and joystick control. Woods ready. Video available if interested

Item ID 99865. Austin x703

HYDRO AX 721E

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

JOHN DEERE 843J

2008 model John Deere 843J machine is tight, dry, and works perfect, running everyday, size 28L tires. Cab has heat/

‘83 John Deere

4850

Item ID:

Contact: Ph:

2004 Hydro ax 721 E is in excellent condition, it has only had two owner/operators its entire life. It has a 8.3 cummins engine, and the machine itself has around 6000 original frame hours. New upgrades include a new windshield, new batteries,

and new blades and teeth on the mowing deck. There are no leaks, and all of the pins and bushings are very tight.

8 foot mower deck. All is work ready.

Item ID 98954. Austin x703

TIMBCO 425D

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

Unit Includes a bunching head and mower deck. The tires are size 28L and are basically new. And it includes a set of chains for the front tires. Machine is really in excellent shape all around and is 100% ready to go to work.

Item ID 99826. Austin x703

CAT 573

2006 model which is the first year Hydro ax bought Cat so technically it is a Hydro ax cutter with Cat decals, but it has 8700 hours on it, and is in real good shape. Woods ready.

Item ID 59580. Austin x703

JOHN DEERE 848L

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

2015 model with 3600 hours in excellent condition. Call for more pictures and information.

Item ID 83128. Austin x703

Ph: (888) 401-6367 x703

HYDRO AX 411 411 Hydro ax comes with log forks, a morbark sheer, and a

off onto a conveyor. This is a very well built processor. Item ID 13820.

ARE YOU SERIOUS ABOUT THE FOREST PRODUCTS BUSINESS?

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

The award-winning Loggers’ Expo returns to the Cross Insurance Center in Bangor, Maine in 2023! Join thousands of the hardest-working people you’ll ever meet to conduct some serious business. The Loggers’ Expo is the largest and best exposition of supplies and services, heavy equipment and trucks –for loggers and land clearers, tree care companies and firewood dealers, sawmillers and landowners.

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

1995 Timbco 425D has around 10000 frame hours. Head is a quadco 22" hotsaw, 40 degree tilt, UC % is around 80. has new rails, rollers, and sprockets, Hardly any leaks around pump system, ac just recharged. working daily. Call for more pics and info.

Item ID 98053. Austin x703

CAT 563C

2016 Cat 563C wheeled buncher with 2010 original hours, size 28L tires, in excellent condition inside and out.

‘95 John Deere C6 Tree Farmer

Item ID 2594. Austin x703

Item ID: 13920

Contact: Austin

FORWARDERS

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

TIMBERJACK 610 2000 model 610 Timberjack forwarder with joystick control, 13000 frame hours. Cummins engine, brand new rubber. Has good AC/Heat. Loading logs daily.

Item ID 100095. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

If you’re serious about the forest products industry – this is the show for you. Contact us for information about exhibiting at or attending the 2023 Loggers’ Expo: visit northernlogger.com email expo@northernlogger.com call 315-369-3078

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

FRANKLIN 132

1994 model Franklin 132 forwarder with 6500 original hours on it, has cummins engine, clean cab with new glass all around. 12' 8'' log bunk. Heat/air, and good 23.1 tires on it. Call for more info.

Item ID 100093. Austin x703

JOHN DEERE 1010D

2005 John Deere 1010/D

Has 14000 frame hours Dry machine, with good pumps. In the woods working now. It comes with two sets of tires (23inch & 43s) Injector pump (Brand New) Turbo Injectors (Brand New) Ready for the Woods!

Item ID 100022. Austin x703

VALMET 644

2002 Valmet 644 forwarder in excellent condition it has a cummins engine with a powershift transmission, joystick controls, and extenda boom. Recent work includes: new center bearing redone, brand new rack, new main

‘83 John Deere

(888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

pump, new valve bank, new brake pump up by the motor, and new clam cylinder. Has new 23.1 tires on the back. Overall very clean and in great shape.

Item ID 99837. Austin x703

VALMET 840.4

2009 Valmet 840.4 6 wheel forwarder. Sisu 6 cylinder diesel motor. 28L size front tires at 75%, 710/45X26.5 rear tires at 60%. fuel fired diesel heater. CRF8.1 Cranab loader, G36 Grapple with protec system. Recent work includes brand new hydro stats, along with new drive motor and new injection pump. Running gears have been gone through from one end to the other. Not a leak on this machine. Also had new fuel pump installed.

Item ID 79249. Austin x703

TIMBERKING 458

2005 Timberking 458 forwarder with 17,750 frame hours, had new engine installed 1000 hours ago, new super grip grapple 1000 hours ago

as well. Very well maintained and straight machine, working daily.

Item ID 171. Austin x703

VALMET 840.2 FORWARDER

buying it about a year ago. -Reason for selling: he mostly cuts small tracts and mostly by himself. Too big for what he does -Everything works as it should.

‘93 Barko 180B

Item ID:

Contact: Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

2005 Valmet 8 wheel double bunk forwarder, around 18000 frame hours, has new trunnion, has new rear bogie brakes that were installed last spring. New loader mast put on a year ago, comes with 1 set of ice chains, and 1 set of bear paws, and 1 set of tracks. Tires are 600's rears are 80% fronts are 40% comes with extra hoses, and extra lights.

Item ID 9770. Austin x703

GRAPPLE SKIDDERS

07' JD 748G III ($49.5K)

Item ID 100127. Joe x709

Item ID: 14077

Contact: Austin

83' TJ 380A ($29.5K)

Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Have videos available -Meter reads 1hr, because it was just replaced, but it showed those hours before install -Tires size: 30.5’s -Tires tread: 80% -Gears shift smoothly -Dual arch -A/C and heat both work -Winch and grapple work -Engine & transmission rebuilt by John Deere 1yr prior to owner

off onto a conveyor. This is a very well built processor. Item ID 13820.

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

New winch drive shaft -New injection pump -Bushings replaced in spring 2020 -Tiny slop in the center section -New glass in the cab -Motor is from a 93’ dodge pick-up truck with low hours installed in summer 2019 -Owner ran it two seasons, then bought a bigger skidder in 2020 -New cylinders for the grapple, -4 speed clark powershift -Tires size: 24.5 x 32, -Owner will put a brand new tire on before sale -4 chains come with sale -2yrs owner -Owner went pretty much thru everything, machine is at work everyday right now. It's ready to go make $$$$ elsewhere.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 100126. Joe x709

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

13' CAT 545C ($64.5K)

Tires size: 35.5’s -A/C works -It’s got new injectors, too -Center Section is good -Blade is fine -Enclosed cab -Tight machine. Everything works as it should -Reason for selling: owner is a Tigercat fellow. Wanted to try CAT and compare. He’s sticking with Tigercat, this can go.

The Tree that Started it All!

Item ID 100123. Joe x709

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

TJ 450 (FOR PARTS OR FIXING)

Engine is in good working conditions. Machine cranks up but doesn't move, it just idles.

** CALENDAR**

Grapple works, no winch, good tires tread still. Can be a fixer upper or used for parts

98' TIMBERJACK 460C

Columbia, (888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

©2017 Woods Publishing

Item ID 100112. Joe x709

NY STATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

2009 CAT 545C ($48K)

Meter reads: 12000 +/- -Center section has no slack -Brand new transmission in 2019. HOLT CAT in TX installed it -All bearings and selas replaced -All braces and supports replaced -Machine is good to go. -Everything works as it should -Owner is not into logging anymore

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

1998 Timberjack 460C grapple and winch skidder, has under 500 hours on a new crate engine, machine starts, runs, and shifts great. Has new lexan glass, all cylinders have been recently repacked, tight center section, the oil cooler leaks a bit, and could be replaced but that is the only repair that it could use. Other than that it is woods ready. Call for more information. Item ID 100106. Austin x703

with 13000 original hours, has the sweda axles, with 44'' tires. One owner/operator skidder, that has been well maintained. Call for more info.

Item ID 100099. Austin x703

Item ID 100109. Joe x709

14' JOHN DEERE 748H

2014 model John Deere 748H

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept

2015 Cat 545D grapple skidder with winch, and 44'' flotation tires, skidder has 4000 original hours, and all of the components work like they should, good center pins, no bad leaks, heat/ac works. Working daily. Call for more info. Item ID 100098. Austin x703

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel machine 130 presses. hours Set 22ft. track

15' CAT 545D

carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom and 36" top saw

CTR 950

CTR 950 Grapple and winch skidder has 5.9 cummins engine, john deere winch, two sets of diamond double chains. Rebuilt the grapple controls recently as well as new fuel pump. Skidder has been well kept and is ready for work.

Item ID 100097. Austin x703

06' JD 648G III ($37.5K)

Single arch -Winch doesn't have cable from lever to the winch -A/C works, heat good -Center pins have a little slack, not horrible -Tires size: 30.5 -Direct Drive machine -Owner is downgrading, down to 1 crew -3yrs owner -Good skidder, will go right to work Item ID 100077. Joe x709

10' JOHN DEERE 648H

2010 model John Deere 648H

-Torque Converter machine

-Has 7500 frame hours -New 210 HP engine installed at 5000 hours -Good Rubber -New windows -Cold AC -Owner operator machine -Working

daily Call for more info. Item ID 100064. Austin x703

JOHN DEERE 648H

2008 Model John Deere 648H it has the heavy axles, and around 100 hours on a complete powertrain warranty, the motor, transmission, fuse panel, center section, glass, and all of the pins and bushings have either been replaced, or rebuilt. It is as close to a new skidder on the used market as you can get. Call for more info

Item ID 100051. Austin x703

TIMBERJACK 460

Timberjack 460 has 5,9 cummins, 3 speed trans, esco grapple, strong winch, dry skidder doesn't burn oil. Working daily, video available if interested. Item ID 100049. Austin x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

TIMBERJACK 240A GRAPPLE

1992 model Timberjack 240A all original factory made grapple skidder, hour meter shows 2800 hours, but has

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Ph: (888) 401-6367 x701

rolled over, so around 12800 original frame hours. runs great, tight pins and bushings, no leaks, strong gearmatic winch that has been all rebuilt. Working daily.

Item ID 100048. Austin x703

‘16 Halverson H140 Skidsteer (DEMO)

TIGERCAT 610C

should. Call for more info.

Item ID 100029. Austin x703

CLARK 666C

homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

Tigercat 610C nice tight machine with 7800 hours currently, has good center pins, and doesn't burn any oil. Working daily. Call for more info.

Item ID 100046. Austin x703

CAT 515

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

2000 model Cat 515 skidder with winch It will include a professionally made arch, so that one could use it as a cable machine if wanted. It currently sits right at 5900 original frame hours. Tire size 28L and the front two tires are going to be replaced with brand new ones before purchase. Inside the cab has good heat/ac and all good glass. This skidder has been meticulously maintained, and every component works like it

off onto a conveyor. This is a very well built processor. Item ID 13820.

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

Clark 666C grapple and winch skidder, just had the 453 Detroit engine overhauled a few hundred hours ago, center section is tight, has new center pins in the front end, along with new pivot pins, also replaced all the cylinders in the continuous grapple. has new 23.1 firestone tires on the back. Everything else works as it should, no bad leaks, it is woods ready.

Item ID 99903. Austin x703

JOHN DEERE 548G2

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1997 John Deere 548G2 in mint condition, skidder has 8800 original frame hours. Pins and bushings are tight, with new center pins put in 1000 hours ago. Also has all new hydraulic lines and hoses. Skidder has always been greased and serviced regularly.

Item ID 99972. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

COMPACT CHIPPERS

20XP or 2090 (20” capacity)

on injection pump. always started good. in good working order. 22in kohing head. head works great.

275 – 350 horsepower engine options

Item ID 13185. Sam x702

270-degree swivel or forestry-style discharge

Optional Kelsa loader

HIGH PRODUCTION TRACK CHIPPERS

4- models available (20” – 30” capacity)

LOGGING EQUIPMENT BANDIT

415 – 1,050 horsepower engine options

Select models available with cab and loader

Durable Caterpillar track undercarriage

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

CAB AND LOADER TOWABLE CHIPPERS

2-models available (2590 or 3590XL)

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Rotobec cab and loader

Item ID 13694. Sam x702

Cab swivels with loader for easy operation

Eliminates the need for an auxiliary loader

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

TRELAN DISC-STYLE CHIPPERS

2-models available (686 or 786)

800 to 1,050 horsepower engine options

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Produces a high-quality paper chip

3/4”, 7/8” or 1” chip sizes

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

If you haven’t tried a Bandit unit for your operation, please contact a local Bandit dealer, email marketing@banditchippers.com or visit our website www.banditchippers.com and we will be happy to assist you!

MODEL 2290 TRACK

20” Capacity Whole Tree Chipper

MQZe5QEFw. Item ID 13572. Chris machine

‘04

Contact: Sam

Ph: (888) 401-6367 x702

Hood guard. Item ID 12267. Sam x702

Mud Tracks. Front

2006 CAT 517

Item ID: 13869

Contact: Sam Ph: (888) 401-6367 x702

Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units.

Item ID 12524. Sam x702

2005 Valmet 860.1 8-Wheeled

Forwarder - 17,800 hours. New hydraulic transmission and gear box in 2013. $70,000 of updates in 2012. Bogies just resealed. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/ hour. 16 ton capacity. One set of

‘14 Komatsu WA200 Loader

One Owner, low hours!

‘14 Hurdle 3-Hd Block Sawmill

Item ID: 13997

Contact: Austin

Ph: (888) 401-6367 x703

2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Engine runs well. Tires at 50%. This is a hard to find gem and priced below market. Item ID 12569. Sam x702 2005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours. 370E Harvesting head just added in 2010 and has 7000 hours. 36”

Firewood Proc.

Item ID: 13865

Contact: Sam

Ph: (888) 401-6367 x702

Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. Still runs OK. Cutting today but will needs some basic

blade.

boom loader, 3 knife disc, Newer

JOHN DEERE 748G3

05’ JD 748G3 Currently working daily Skidder has 6600 original frame hours Used a backup skidder most it’s life. John Deere rebuilt front cradle roughly 10 hours ago, it also had a new wiring harness, and 2 new shift solenoids put on 2 months ago. Transmission was rebuilt 2 years ago. Ac and heat works. One back tire is 100% other back is 60% front two are 30% Skidder has always been Kept serviced and greased. Runs good, shifts good.. Operates good VIDEOS AVAILABLE. Item ID 99967. Austin x703

“Precision Under Pressure”

TIMBERJACK 450C 95 Timberjack 450C Grapple / Winch Skidder. Has a Prolenc snubber that was installed in October 2014. Installed a reman Cummins engine (purchased from Cummins) that now has only 1,800 hours on it. New “Heavy Duty” radiator was installed at the same time as the engine. Both rear-ends have been re-built. Transmission has been rebuilt

about 4,000 hour ago. Center pins have been replaced and are tight. New suspension seat. Has no leaks / machine is dry all over. The hour meter reads 3,900 hours but previous owner said he replaced the meter at around 4,000 hours so machine is around 8000 frame hours. Has heat but no air conditioning. Winch was rebuilt by Holt Equipment. 28L X 26 tires at 90%. This machine is in excellent shape. Everything operates as it should. This was the main machine until they updated to a feller buncher and bogie skidder. Whenever it needed anything it was fixed back to new condition. This will make someone an excellent machine that will provide them years of service.

Item ID 100026. Austin x703

JOHN DEERE 848H

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2012 John Deere 848H Has 12,000 frame hours Motor and transmission were rebuilt 2 years ago. Everything works as it should, skidding wood daily.

Item ID 99963. Austin x703

TIGERCAT 610E

Tigercat 610E dual arch and grapple skidder. Everything works and is woods ready. Has new 30.5 tires on front, and rears are at 40%, 5900 total frame hours, always greased, and well maintained.

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘16 Halverson H140 Skidsteer (DEMO)

Item ID 99935. Austin x703

Item ID: JW-909632

Contact: J Williams

JOHN DEERE 748H

2010 John Deere 748H

Ph: (888) 401-6367 x701

12000 frame hours, motor just rebuilt with low hours on it, center section is tight, has new windshield. All the other components works like they should. Call for more info.

Item ID 99920. Austin x703

JOHN DEERE 648E

‘13 KMC 2500 Track

Skidder

Item ID: 14078

Contact: Austin

John Deere 648E dual arch grapple skidder, has the 6068T motor in it, doesn't burn or use any oil, motor rebuilt a few thousand hours ago, cab has new glass. Only thing it doesn't have is a winch.

Ph: (888) 401-6367 x703

Item ID 99894. Austin x703

TIMBERJACK 450C

off onto a conveyor. This is a very well built processor. Item ID 13820.

1996 model Timberjack 450C

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

it has brand new 23.1 primex tires on it, with a set of ice chains. New motor installed two years ago but still has low hours on it, transmission was gone through at that time, as well as the radiator. Has enclosed cab with heat and air. This skidder has been used as a backup most of the time and is in really good shape. The only flaw is that the owner used it as a cable machine and actually sold the grapple, if someone was interested, we could help locate a grapple for you. Call for more info.

Item ID 99889. Austin x703

TIMBERJACK 240C

GRAPPLE WITH WINCH

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

1997 Timberjack 240C Grapple with winch, approx 9,500 hours, recently had $20,000 of work (New torque converter and anything else it needed, hoses, fitting, etc.) excellent 4BT Cummins motor, good 23.1 tires, power shift machine, meticulous maintenance, and upkeep. Super Rare Skidder! Call for more pictures!

Item ID 99861. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

control, 33” bar, pump and tranny

3-5

Since published reaching pallet industrial worldwide.

‘05 Tigercat 230B

Item ID: 13911

Contact: Austin

Ph: (888) 401-6367 x703

‘99 Hydro-Ax 511EX

(888) 401-6367 ext. 702 sam@lumbermens.co

Item# 13795

Contact: Sam

Ph: (888) 401-6367 x702

2006 Logosol Planer - This is a 10” 4 sided planer that has removable side cutters that will take up to 12” lumber and includes a blower system. Item ID 13428. Sam x702

POLE & POST PEELERS

Item ID: 13799

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 38402-1916 401-6367

Contact: Sam Ph: (888) 401-6367 x702

‘98 611 Ex-Hydro

SUBMISSIONS

‘10 Shop Built Wood Processor

Item ID: 13916

May be sent tomorris@lumbermens.co

Contact: Austin

POSTMASTER

Ph: (888) 401-6367 x703

Send address changes to: Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

Skidder - Very good running condition. Big Capacity Grapple!

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All reserved. All editorial/ advertorial submissions are used at discretion of the publisher be edited for purposes of and space. Although all been made to ensure accuracy content submitted by advertisers and writers, the Lumberman's Exchange, its principles associates, are not held errors or omissions. Reproduction, in whole or part, is prohibited out written consent.

Item ID: 13948

Contact: Austin

Ph: (888) 401-6367 x703

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

ID 13438. Sam x702

2007 TimberPro 810 Combi Machine - Forwarder set up but comes with rebuilt Log Max 750

Runs great. Has worked double shifts so it has higher hours at 13,500, but has been well maintained. New U/C last year. 24” grousers. All pumps rebuilt last year. Gull wing engine cover with hydraulic lift for easy maintenance. Rolly II in good condition and computer measures well. Owner retiring. Bought new for $540,000!. Item ID 13362. Sam x702

PS8 Post Peeler - This peeler has been converted to electricity over hydraulic. Comes with a operators cab, electric boxes, conveyor and kickers and will peel a 3” post to a 7” post. Comes with a barko loader mounted on a truck that has also been converted to electric power. Item ID 13926. Sam x702

1996 Timbco T425B FB w/2008

9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders –grapple arch, steering; Replaced hydraulic hoses and lines where needed – fill pump, grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced center pins; Straightened and painted panels; Changed all fluids and filters; Re-insulated cab; Checked and fixed wiring as needed. Item

grapple. Cummins 6.7 QSB engine.

bogies adds $10,000. Item ID 13501. Sam x702

©2017 Woods Publishing

2010 TimberPro 725B w/Rolly II Processor - Super Clean Machine.

Rotosaw Intermittent Saw Head. Machine has 540 degree non continuous rotation on upper. 9900 hours. New Undercarriage. New glass in cab. Very good running condition. Rotosaw has 360 degree rotation. Cummins 6CT8.3 engine with 215 HP. Machine runs great. Working in select hardwood today. Item ID 13548. Sam x702

36” Portable Sawmill - Maximum diameter log- 36” Maximum length of cut-20’6” Powered by a Koehler Diesel 9.8HP Blade-1-1/4” by 13’2” long 12 Volt saw-head precision up/down. Item ID 13897. Austin x703

2006 TimberPro 830 COMBI

Harvester/Forwarder - Just 5700 hours. Very good condition. Comes with grapple for loading forwarder and Log Max 7000 processing head for harvesting. 2 sets of tracks for bogies. Set up for quick change from harvester to grapple. One man operation. Log Max head has top saw and runs well. Compare to new machine at $650,000. Item ID 13439. Sam

computer and Scorpion controls, added speed control. 2 sets of tracks , all new Lexan. Located in Alberta, Canada. Customer will pay shipping to closest US entry point. Item ID 13532. Sam x702

1997 Timbco 820C Clam Bunk Forwarder - “4000” original hours. 20.3 x 25 rubber at 70%. Hand sanded and painted, brand new

PLANERS

1998 Timberline Stroke Delimber8400 hours. U/C at 60%. Will crank and run. Owner retired. Machine idle for past year. Item ID 13599. Sam x702

1999 Timbco 820D Clam Bunk

Forwarder - 10,300 hours. New engine less than 500 hours ago. Can accept bunks, but none with machine. Owner has two sets of

36” Portable Sawmill - Maximum diameter log-36” Maximum length of cut-20’6” Powered by Koehler gas 19HP Blade 1-1/4” by 13’2” long 12 Volt saw-head precision up/down 12 Volt Electrical Forward/Reverse Saw Head Travel. Item ID 13899. Austin x703 Dixon Sawmill - VERY UNIQUE AND EFFECTIVE MILL! Dixon 52 in bottom blade and 38 in top blade. It has a four blade vertical edger diesel powered with a fuel efficient duezt 247hp motor. Item

tracks additional Sam 1999 11k hrs engine fresh 28L 26 decent. but could and there. could bushed. 13212. 2000

4-Roller on meter. engine U/C with pump, new cooler, Package extra

‘97 Prentice 210E

x702

E-mail:

‘93 Barko 180B

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID:

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Clean-Burn Design The WOOD-PAKER

Contact: Austin

Ph: (888) 401-6367 x703

bbmfg@verizon.net www.thewoodpaker.com B & B Manufacturing • 3007 West River Road • Olean, NY 14760 IntegrIty • PrecIsIon • QualIty • Value

Item ID 13421. Sam x702

BARKO

Kerf Band saw Blades Our Quality • Our Service • Our Price 1-888-857-5153 Check Out Woodmaster ‘89 Item Contact: Ph: Wood-Mizer Item Contact: Ph:

Rotary

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘06

with Innovative

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50 YEARS

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!.

NY STATE WOODSMEN'S FIELD D AYS

Logging Equipment Loss Due to Fire

BACKGROUND

On a logging job in the Lake States Region during February, an operator of harvesting equipment had blown a hydraulic hose. He called for assistance from a skidder operator for a tow to the landing where the equipment could be repaired.

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PERSONAL CHARACTERISTICS

The experienced business owner has been logging for nearly 50 years. This was the first time in his career that he experienced an equipment fire.

PUBLISHER

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/ SOUTHWEST L

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

& HEADSAWS

MID-ATLANTIC

Woods Publishing

UNSAFE ACTS AND CONDITIONS

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

ACCIDENT

MID-ATLANTIC LOGGING & BIOMASS EXPO

A blown hydraulic hose leaked a flammable fluid that came into contact with a hot surface.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

While operating the equipment, the machine operator noticed a hydraulic hose had blown. The hose leaked a hydraulic fluid that was ignited when it contacted a hot surface. The operator and several other workers attempted to put out the fire with multiple fire extinguishers but were unsuccessful.

Roughly it in production conveyers airbags, Mcdonough wheel machine 130 presses. Item ID 13876. Austin x703

DESIGN DIRECTOR

INJURY

Donna Heninger

THE PAUL BUNYAN SHOW

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

FIRE PREVENTION FOR LOGGING EQUIPMENT

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

No injuries resulted from the equipment fire. The machinery was a total loss that significantly impacted the production and profitability of the logging business.

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

• Identify ignition sources on logging equipment. Hot engines, electrical faults, and exhaust surfaces are considered “hot spots.”

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

2010 Cardinal HD Carriage

• Schedule preventative maintenance to inspect machines for worn parts. Aging equipment may need to be inspected more often.

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916

• Debris from logging, such as leaves, branches, and sawdust, can accumulate on hot surfaces. Inspect these areas several times throughout the day. Shut down the machine and clean debris from hot surfaces if found. Common spots for debris accumulation are belly pans, side shields, and access guards.

(888) 401-6367

• Check for a buildup of grease, oil, and fuel from leaks or spills.

AD SUBMISSIONS

• Implement a proactive review of electrical systems and wiring components. Log inspections and monitor the frequency of inspections.

• Keep fully charged fire extinguishers on board the equipment.

May be sent tomorris@lumbermens.co

POSTMASTER

• Shut down equipment before fueling.

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Send address changes to: Lumberman's Exchange

• At the end of the day, remain on site for 15-30 minutes to monitor machinery for fire ignition.

• Consider installing an onboard fire suppression system.

P.O. Box 1916 Columbia, TN 38402

©2017 Woods Publishing

Technology turns waste-wood into climate-friendly product

Kalispell, Montana — Forest management activities create valuable wood products like lumber but can also generate woody residues with little or no economic value. This waste material is generally burned or hauled away. The USDA Forest Service and a private company, Air Burner Inc., teamed up to help find a solution to this problem. CharBoss is a mobile machine that converts wastewood products into biochar, a nutrient-rich product that can be used for soil restoration or to enhance agricultural land.

Debbie Page-Dumroese is a researcher with the USDA Forest Service Rocky Mountain Research Station who helped develop and patent the technology and is a leading expert in the use of biochar. She shared her excitement in the latest developments, “The ability to process woody residues on-site reduces open burning or the need to transport materials off-site, so there is less smoke and air pollution. Even better, we can create this terrific product that can be used to restore damaged soil.”

The CharBoss made its initial debut in Bandon, Oregon in the fall of 2020 by tackling Gorse, an invasive woody shrub, and demonstrating how this technology can be used to also improve wildlife habitat. The CharBoss team recorded the demonstration and it is available online.

Seeing an opportunity to make improvements the team reengineered the CharBoss to be more efficient and increase its production volume. The updated CharBoss has been transported from Florida to Idaho and will be arriving in the Flathead Valley in early February. When it arrives later this month, the Flathead

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

National Forest, Rocky Mountain Research Station, and the Montana Department of Natural Resources and Conservation, with help from the heavy equipment program at Flathead Valley Community College, will host a demonstration for interested land managers, partners, and the public. The event is scheduled to take place at the Lake Five timber sale near Coram, MT Thursday, February 16, 2023. This time it will be utilizing slash created by forest thinning and fuel reduction and turning it into “black gold” otherwise known as biochar.

Science suggests that biochar can increase seedling quality and enhance degraded soils with its rich carbon content and moisture retention properties. Land managers can use the CharBoss to create biochar on-site without worrying about the logistics of off-site production and transportation. Mobile processing can also help rural economies by providing local materials and jobs for forest restoration.

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Contact: Austin

Ph: (888) 401-6367 x703

LUMBERMEN’S Equipment Digest PO Box 1146

Ph: (888) 401-6367 x703

Jim Archuleta is a Forest Service regional biomass coordinator who helped pioneer the innovation of CharBoss. He talks about its potential for mitigating climate change, by reducing unnecessary smoke and emissions and returning carbon to soils and vegetation at larger landscape scales, “Making biochar production part and parcel of normal Forest Service activities is the best way to make the seismic changes needed to help adapt to our changing climate.”

Columbia, TN 38402-1146 1-800-477-7606 Fax (931) 388-3564 www.lumbermenonline.com

capacity!. Item ID 13421. Sam x702

BARKO

You can learn more about the technology behind CharBoss here. For more information on our local demonstration, click here or contact Ivy Gehling at (406) 758-5251 or ivy.gehling@usda.gov.

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

NY STATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Sunbelt Forest Products Unveils New Brand Identity and Expanded Product Line

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

BARTOW, Fla. — Sunbelt Forest Products unveiled a new logo and redesigned website this week, reflecting the company's enhanced offerings in the wake of two years of unprecedented company expansion.

In 2021, Sunbelt Forest Products acquired Spartanburg Forest Products to become the leading supplier of pressure treated lumber and wood fencing to Lowe's and independent lumber yards throughout the Eastern United States. With the Spartanburg acquisition, Sunbelt Forest Products has grown to 12 locations with a service area stretching from Florida to Maine.

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS

In addition to the northward expansion, Sunbelt has been diversifying its product offerings. The Deckorators® brand of designer decking and accessories, the DIY-friendly Outdoor Essentials® fence, lawn, and garden products, and the stylish UFP Edge line of siding, pattern and trim, highlight the expanded slate while an expansion into non-lumber products is being piloted in select markets.

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

"With our new products, we are prepared to provide optimized personal service to our customers of all sizes," says Sunbelt Forest Products President Ken DelleDonne. "Our goal is that every truckload from Sunbelt Forest Products will deliver a wide variety of building materials designed to meet each customers' needs."

KENTUCKY WOOD EXPO

The new website will highlight the augmented product selection while effectively directing customers – contractors and consumers alike – to the entire line of premium quality pressure treated fencing and decking products. The redesigned website will also contain a new blog and a wide variety of collaborative and knowledge-based service programs designed to promote growth for our customers.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

DESIGN DIRECTOR

Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

THE PAUL BUNYAN SHOW

"The new logo and website signal to the industry that Sunbelt Forest Products is bigger, better, and ready to serve our customers in more ways than ever," said DelleDonne. "Sunbelt is proud to offer independent dealers the perfect partnership for success. With our extensive selection of building material products, fast and efficient service, and long-standing history of exceptional customer experience - this opportunity assures mutual growth in profitability."

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

With a pressure treating production capacity of more than 1.2 billion board feet and over 65,000 outbound loads shipped annually, the new Sunbelt Forest Products is positioned to provide full-service solutions for decking, fencing, and expanded catalog to more clients than ever before.

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

About Sunbelt Forest Products

MAILING ADDRESS

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Based in Bartow, Florida, Sunbelt Forest Products is a leading producer of pressure treated lumber and residential wooden fencing in the Eastern U.S., with over 450 employees. The company is an affiliate of UFP Retail Solutions, a subsidiary of UFP Industries.

P.O. Box 1916 Columbia, TN 38402-1916

(888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

Follow Sunbelt Forest Products

https://www.facebook.com/SunbeltForestProducts

POSTMASTER

https://twitter.com/sunbeltforest

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Send address changes to: Lumberman's Exchange

https://www.linkedin.com/company/sunbelt-forest-products/

P.O. Box 1916 Columbia, TN 38402

The published Publishing, Columbia, reserved. submissions discretion be and been content submitted and Exchange, associates, errors in out

All Sizes Available!

LOGGING & BIOMASS EXPO

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

The Tree that Started it All!

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

STATE WO AYS

Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST F EXPO

Ryans Saw Head Item ID: 4987

Contact: AUSTIN

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CAT 517 Grapple Dozer Item ID: 48152

Contact: SAM

Email: Sam@lumbermensco.com

& HEADSAWS

725B TimberPro Item ID: 11870

Contact: AUSTIN

Email: Austin@lumbermensco.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Thurs, 7 Sept - Sat, 9 Sept Escanab

MID-ATLANTIC L IOMASS

Tigercat Item ID: 53616

ADVERTISING SALES

MID-ATLANTIC LOGGING & BIOMASS EXPO

Contact: AUSTIN

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

John Deere 350 Item ID: 16326

Contact: AUSTIN

Email: Austin@lumbermensco.com

Fri, 15 Sept pt Selma, North www.midatlantic-logging-biomassexpo.com/

Dymax Tree Shear Item ID: 6478

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

MARKETING DIRECTOR

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN

EQUIPMENT REPS

(888) ext. 702 sam@lumbermens.co

FAE Forestry Mulch Head Item ID: 3005

Contact: AUSTIN

(C) 931-797-8029

CAT 518 Grapple

Item ID: 74169

Contact: SAM

Email: Austin@lumbermensco.com

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

morris@lumbermens.co

Send address changes to: Lumberman's Exchange

RISLEY ROLLY 3 Item ID: 2390

Contact: SAM

P.O. Box 1916 Columbia, TN 38402

Email: Sam@lumbermensco.com

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

(C) 615-596-4148

Excavator 330LX Link Belt Item ID: 70897

Contact: AUSTIN

Email: Austin@lumbermensco.com

KENTUCKY WOOD EXPO

Contact: AUSTIN

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

PT20H Danzco Delimber Item ID: 14134

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Timberjack 360C Grapple Skidder Item ID: 63219

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 640D Cable Skidder Item ID: 74703

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, conveyers that airbags, it includes Mcdonough pressure Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 13434. Sam x702

Prentice 210E Loader Item ID: 79682

CARRIAGES & DRIVES

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, sawyers controls, cabinet drives for carriage knees, husk including 48" bottom saw and 36" top saw

John Deere 440B Cable Skidder Item ID: 47188

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

FR21B Hotsaw Item ID: 99906

Contact: AUSTIN

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. editorial/ advertorial submissions discretion may be edited and space. have been made of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

©2017 Woods Publishing

460 Timberjack Item ID: 20661

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 548E Item ID: 92662

Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Feller Buncher Item ID: 78672

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Timberjack 460D Item ID: 91657

Contact: AUSTIN

CAT D5H LGP Item ID: 64808

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘93 Barko 180B

2009

‘16 Halverson H140 Skidsteer (DEMO)

Contact: SAM

ID: 83019

Item ID: JW-909632

Email: Sam@lumbermensco.com

Item ID: 14077

Contact: Austin

Mack Truck with Hood Loader Item ID: 76831

Franklin

Grapple

Item ID: 55955

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS

& GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Item ID: 54867

John Deere 1710D Forwarder Item ID: 94242

Contact: SAM Email: Sam@lumbermensco.com

‘05 Gehl CTL 70

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

CAT 140G Item ID: 93592

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078

Contact:

Ph:

off onto a conveyor. This is a very well built processor. Item ID 13820.

2005 John

Sam x702

2054 Track Loader Item ID: 82959

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Ph: (888) 401-6367 x703

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

‘95 John Deere C6 Tree

CAT D4C LGP Forestry Dozer Item ID: 99373

Item ID: 13920

Contact: SAM

Contact: Austin

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Ph: (888) 401-6367 x703

CAT D6M Dozer Item ID: 71062

Contact: SAM Email: Sam@lumbermensco.com

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

Prentice 384 Knuckleboom Loader Item ID: 36889

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Feller Buncher w/DS Ryan 28 Felling Head Item ID: 76226

BELL

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Farmer

2384 Prentice Knuckleboom Loader Item

Q80

Skidder

Deere

John Deere 648 G Grapple Skidder w/Winch

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching loggers, pallet makers, recyclers and industrial plants worldwide.

STATE WO D AYS

Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

EXT 702 (C) 615-596-4148 153

ADVERTISING SALES

MID-ATLANTIC LOGGING & BIOMASS EXPO

72ND

2001

Contact: SAM Email: Sam@lumbermensco.com

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

TF 830C Item ID: 8077

Contact: SAM

Email: Sam@lumbermensco.com

Item ID: 7720

Contact: SAM

Email: Sam@lumbermensco.com

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701

DESIGN

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Tigercat

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cable Skidder Item ID: 6552

Contact: SAM

Item ID: 4677

Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 12,400 13434.

Sam x702

CARRIAGES & DRIVES

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

2010 Cardinal HD Carriage

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148 515

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

(C) 615-596-4148

Send address changes to: Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

John

Item ID: 7407

Contact: SAM

Email: Sam@lumbermensco.com

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage controls, for 36" top saw

John Deere 648D Item ID: 16

Contact: SAM Email: Sam@lumbermensco.com

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

©2017 Woods Publishing

Ponsse Ergo

604

Prentice 1190T Tracked Feller Buncher

Deere 753J Tracked Cutter

John Deere 440C’s Package Deal Item ID: 100094

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

08’ JD 843J Item ID: 100122

John Deere 750J Item ID: 100015

Contact: AUSTIN Email: Austin@lumbermensco.com

‘05

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

79’

225D Item ID: 100087

‘16 Halverson H140 Skidsteer (DEMO)

Contact: AUSTIN

Item ID: JW-909632

Email: Austin@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

97’

Deere 640G Item ID: 100070

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact:

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

John Deere 650H Item ID: 99876

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Item ID: 100104

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: AUSTIN

LOGGING EQUIPMENT BANDIT

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: AUSTIN

Item ID: 14077

97’

Contact: Austin

240C Item ID: 100076

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421.

John Deere 650G Item ID: 99852

Contact: AUSTIN

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in

15’ Tigercat 724G Item ID: 100101

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Contact: AUSTIN

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Gehl CTL 70

John Deere C6 Tree Farmer

John

Timberjack

Timberjack

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701

STATE WO AYS

Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST EXPO

John Deere 753J Item ID: 99917

Contact: AUSTIN

& HEADSAWS

(888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

Send address changes to: Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted by and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

©2017 Woods Publishing

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS EXPO

John Deeere 643G Item ID: 99897

Contact: AUSTIN

14’ Tigercat 720E Item ID: 99916

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 843J Item ID: 99879

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Hydro AX 721E Item ID: 99826

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CAT 573 Item ID: 59580

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 643K Item ID: 99905

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 643K Item ID: 99866

Contact: AUSTIN

Email: Austin@lumbermensco.com

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 13434. Sam x702

John Deere 848L Item ID: 83128

CARRIAGES & DRIVES

Contact: AUSTIN

2010 Cardinal HD Carriage

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage controls, for 36" top saw

610 Item ID: 100095

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Valmet 840.2

Forwarder Item ID: 9770

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

John Deere 648H Item ID: 100051

Best Value Portable Log Splitter

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

CAT 515 Item ID:100029

Contact: AUSTIN Email: Austin@lumbermensco.com

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 Skidsteer (DEMO)

07’

Item ID: 100127

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

Item ID: JW-909632

Contact: JOE

Email: Joe@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact:

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

CTR 950 Item ID: 100097

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Timberjack 460 Item ID: 100049

Contact: AUSTIN

Email: Austin@lumbermensco.com

LOGGING EQUIPMENT BANDIT

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Contact: JOE

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in

Timberjack 240A Grapple Item ID: 100048

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

JD 748G III

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701

MID-ATLANTIC LOGGING & BIOMASS EXPO

STATE YS

Fri, 18 August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7

(888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

& HEADSAWS

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, carriage, sawyers controls, cabinet drives for carriage knees, husk including 48" bottom 36" top saw

Send address changes to: Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

©2017 Woods Publishing

John Deere 1270 Item ID: 34512

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

06’ JD 437C

Contact: JOE

Email: Joe@lumbermensco.com

Prentice 310E Item ID: 100044

Contact: AUSTIN

Email: Austin@lumbermensco.com

EXT 709 (C) 801-362-2170 Timbco 420 Item ID: 99833 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 13’ Tigrcat 234B Item ID: 100100 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Tigercat 234 Item ID: 100014 Contact: AUSTIN Email:

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

Prentice 210C Item ID:

81471

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

‘05 Gehl CTL 70

Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Prentice 180D Item ID: 7822

Best Value Portable Log Splitter

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Morbark Model

Chipharvester

Item ID: 38035

‘16 Halverson H140 Skidsteer (DEMO)

Prentice 2190 Item ID: 28889

Contact: AUSTIN

Item ID: JW-909632

Email: Austin@lumbermensco.com

Item ID: 14077

Ecolog 590D

Contact: Austin

Item ID: 874

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Barko 595ML & CSI 4400 Saw Item ID: 100060

Contact: AUSTIN

‘95 John Deere C6 Tree Farmer

Tigercat 250 Item ID: 100058

Item ID: 13920

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Hood 24000 Item ID: 100013

Contact: CJ Email: CJ@lumbermensco.com

Phone: 888-401-6367 EXT 701 (C) 888-401-6367

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

CAT D6k2 Item ID: 99839

Contact: AUSTIN

LOGGING EQUIPMENT BANDIT

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

20

Contact: SAM

Email: Sam@lumbermensco.com

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Morbark 30XL Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Email: Austin@lumbermensco.com

Contact: Austin

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

capacity!.

Item ID 13421.

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM LOGGING

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in

Komatsu D39PX-22 Item ID: 99830

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item

ID

CAT 517 Grapple Dozer

BELL

Item ID: 70690

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID:100078

STATE YS

Fri, 18 August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST EXPO

S&W

125 High Production

Email: Austin@lumbermensco.com

The Tree that Started it All!

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

Morbark PS8 Post

ADVERTISING SALES

15’

Item ID: 100128

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Cooper Scragg Mill

Item ID: 100113

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

Contact: JOE

Email: Joe@lumbermensco.com

Woodmizer Smart Log Processing

BANDMILLS & HEADSAWS

Item ID: 100089

Contact: AUSTIN

Email: Austin@lumbermensco.com

72ND ANNUAL GREAT LAKES LOGGING &

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MID-ATLANTIC LOGGING & BIOMASS EXPO

Contact: AUSTIN

Item ID: 100055

Email: Austin@lumbermensco.com

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Edmiston Complete Item ID: 99883

Contact: AUSTIN

Email: Austin@lumbermensco.com

Bush Chip Pak Item ID: 38894

Contact: SAM

Email: Sam@lumbermensco.com

MARKETING DIRECTOR

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Williams (888) 401-6367 ext. 701 (888) 401-6367 ext. 702 sam@lumbermens.co

Pendu Cut Off Saw Item ID: 10632

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: 42175

Baker Notcher Item ID: 49307

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916

morris@lumbermens.co

POSTMASTER

Fast

Send address changes to: Lumberman's Exchange

Run Around System Item ID: 84282

P.O. Box 1916 Columbia, TN 38402

Email: Austin@lumbermensco.com

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Email: Austin@lumbermensco.com

Whole

Item ID: 41602

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

EXT 703 (C) 931-797-8029

Cornell Sizer Item ID: 48105

Contact: SAM

Email: Sam@lumbermensco.com

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, conveyers that go with airbags, it includes Mcdonough pressure Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 12,400 13434.

Sam x702

Morbark

CARRIAGES & DRIVES

Item ID: 64060

2010 Cardinal HD Carriage

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, sawyers controls, cabinet drives for carriage knees, husk including 48" saw

Baker 2 Head Resaw Item ID: 6828

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

©2017 Woods Publishing

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Austin@lumbermensco.com

888-401-6367 EXT 703 (C) 931-797-8029

Salsco Slab Chipper SC-6

Peeler

Tree Chipper

Precision Husky Chipper Item ID: 100115

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Tajfun

Item ID: 7120

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Bandit Grinder - Chipper Item ID: 72593

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Forestry

Item ID: 46375

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2008 Cat

Steer 289C Item ID: 60484

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

Morbark

Item ID: 16264

CAT

Item ID: 39840

Contact: SAM

Email: Sam@lumbermensco.com

‘05 Gehl CTL 70

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Morbark

Best Value Portable Log Splitter

Item ID: 75143

‘16 Halverson H140 Skidsteer (DEMO)

Dynamic Horizontal Grinder Item ID: 5011

Contact: AUSTIN

Item ID: JW-909632

Email: Austin@lumbermensco.com

Item ID: 14077

Contact: Austin

Tajfun 400 Joy Item ID: 99312

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Mounted Horizontal Grinder

Item ID: 373

Contact: AUSTIN

2008 Cat

‘95 John Deere C6 Tree Farmer

Steer 289C Item ID: 73486

Item ID: 13920

Contact: AUSTIN

Contact: Austin

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

off onto a conveyor. This is a very well built processor. Item ID 13820.

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

Sam x702

H240 John Deere Tractor Item ID: 4808

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

CAT 232D Skid Loader Item ID: 39708

Ford Bucket / Boom Truck Item ID: 80919

Contact: AUSTIN

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item

John

85D Item ID: 48169

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Horizontal Grinder Item ID: 96128

2010 Shop Built Wood Processor

Contact: SAM

Email: Sam@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: SAM

LOGGING EQUIPMENT BANDIT

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

John Deere 700J Dozer Item ID: 54715

Contact: SAM

Email: Sam@lumbermensco.com

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

CAT 318CL

Item ID: 97884

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

John Deere 700J LGP Item ID: 4747

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

480 Plus Joy

Skid

Skid

30/60 Chipper

Deere

2014 Morbark M20R

Track Chipper

2018 Diamond Z Track

527 Grapple Dozer

Vermeer HG6000

6036 Chipper

‘93 Barko 180B

20,000lb goose neck trailer. Item ID

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Value! PA. Item ID 12062. Sam x702

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

1116

Columbia, Tennessee 38401