TM APRIL 2024 pg.26>> INDUSTRY NEWS - PG 6
capacity!. Item ID 13421.
‘83 John Deere 4850
Item ID:
Contact:
Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
grapple, 5,000 original hours. (excellent condition.). Item ID
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website
Sam x702
Firewood Processor - This is
Sam x702
BELL
Bell Super T - This Bell has
brand new Duetz engine.
bar,
SAWMILL.SHOP | Call Jay at (800) 598-6344 • Honda Gas 30hp (gross) engine. TURBOSAWMILLS ARE IN STOCK LIVINGTHE WOODLIFE ! SAWMILL.SHOP 11” x 24” double cut • Honda Gas 30hp (gross) engine. SAWMILL.SHOP | Call Jay at (800) 598-6344 • Single-end vertical & horizontal sizing • 10” x 10” standard cut • 9” x 20” double cut • Honda Gas 30hp (gross) engine. TURBOSAWMILLS ARE IN STOCK LIVINGTHE WOODLIFE ! SAWMILL.SHOP M12-28A - 3 In Stock • Single-end vertical & horizontal sizing • 12” x 12” standard cut • 11” x 24” double cut • Honda Gas 30hp (gross) engine. M10-28A - 4 In Stock M10-28A: $29,900 M12-28A: $35,000 SAWMILL.SHOP | Call Jay at (800) 598-6344 Single-end vertical & horizontal sizing 10” standard cut 20” double cut Gas 30hp (gross) engine. M12-28A - 3 In Stock • Single-end vertical & horizontal • 12” x 12” standard cut • 11” x 24” double cut • Honda Gas 30hp (gross) engine. M10-28A - 4 In Stock M10-28A: $29,900 M12-28A:
1990
a
Lever control, 33”
published a monthly circular
Heninger Send address changes to: errors or omissions. Reproduction, CALENDAR** MID-ATLANTIC BIOMASS Thurs, 7 Sept Sat, 9 Sept Fri, 6 Oct Sun, 8 Oct ** .............................. Machining Mfg Buck Equipment (AIM) 36 Morbark 9 .............................. Metalworks Mill-ArmorHog Mill-Hogzilla Products ........................ Hydraulics Mfg Machinery ................................... Kilgore Saw 22 Uni versal Refiner 23 feet minute also has CLT STACKING
Donna
www.empirehyd.com info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO)
J Williams
(888) 401-6367 x701
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
‘83 John Deere 4850
Item ID:
Contact:
Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Ph: (888) 401-6367 x701
•
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
•
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT BANDIT
1995 Barko 775 B Feller Buncher
-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9
CUMMINS
1990
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126
capacity!. Item ID 13421. Sam x702
BELL
continuous grapple. Runs Great!. Item ID 13740. Sam x702
Bell
a brand
control, 33” bar,
and tranny ‘95 John Deere C6
Wedge and splitter design to suit your needs
Super T - This Bell has
new Duetz engine. Lever
pump
•
24 to 72 ton splitting capability
The fastest splitting cycle time on the planet. Email: info@cordking.ca Web: www.cordking.ca TOLL FREE 1-888-219-WOOD (9663) Grapple Assist for crooked logs
Line-up Facts to consider: 1. Pioneered N. America’s first commercial firewood processor in the mid 70 ’s 2. 3 Bar saw models available M1820, M2030 and M2430 3. 7 Slasher Saw Models Available Model 36, 40, 44, 44HO, 48, 54 & 60 4. The Most productive machine on the planet, proven and guaranteed 5. Go to our web site for live action video and details www.cordking.ca 6. Available with single joystick control 7. Exclusive lifetime splitter warranty and 1 year bumper to bumper warranty.
2019 Cord King
SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.
CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.
REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, and printing material contained within. We shall not be liable for omissions or typographical errors.
that Started Since published reaching pallet industrial worldwide. Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing ** CALENDAR** SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com 2ND ANNUAL GREAT LAKES GGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan MID-ATLANTIC Fri, ww.midatlantic-logging-biomassKE Fri, L http://www.kfia.org KentuckyWoodExpo.aspx THE Fri, ww INFO 18 M&F 16 Meadows 7 Menominee 27 Metal 31 Midwest Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Shop 13 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 CW Mill-Hogzilla 15 Row Electric 20 Dyna Products ........................ 35 Sawmill Exchange .................. 11 Empire Hydraulics 8 Select Sawmill 19 Great Lakes Mfg 34 Smith Sawmill 4 Hahn Machinery 3 The Paul Bunyan Show ......... 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers carriage turners, carriage for STACKING RAC www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS TABLE OF CONTENTS TM Walker (888) 401-6367 Ext. 707 walker@lumbermensco.com Joe (888) 401-6367 Ext. 709 joe@lumbermensco.com
DEPARTMENTS If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: Lumbermens Magazine P.O. Box 1916 Columbia, TN 38402 ❑ Please a dd ❑ Please Change ❑ Please Remove Company Name* Individual Name Address City State Zip Phone Email *Company name and address required to process your change. ✁ PleAse PrINt Issue 364 lumbermenS Since 1986 ❘ liSt Sell exchange buY Save ❘ lumbermenSmagazine.com chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co EquipmEnt REpREsEntativEs Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co cAll uS todAy foR All youR uSed equiPMent needS! fREE EquipmEnt listings! Call –(888) 401-6367 Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co DealS Month From ApriL of the For classifieds Call toDay (888) 401-6367 L IST SELL EXCHANGE BUY SAVE E ST 1986 E ST 1986 L IST SELL EXCHANGE BUY SAVE E ST 1986 L IST SELL EXCHANGE BUY SAVE Reduced PRice item id: 14021 contact: Sam x702 '12 WoodmIzer LT 40 item id: 14061 contact: Austin x703 item id: 14061 contact: J Williams x701 2012 JoHn deere 548G3 FAbTeK 344b blades and 1 spare 36" blade), short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop and loader to drop logs onto carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Significant new spare parts to be negotiated separately. Item ID 13198. Sam x702 Manual Four Head Block - Manual Four Head Block Mounted on all steel carriage. Husk. Manual Pulleys on Bearing . Parts Book and where to order included. Item ID 12846. Sam x702 CHIPPERS Precision 58 Chip Pac - Single chute loading system,. Item ID 12764. Sam x702 Trelan Chipper - This is a remote chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New clutches, disc, bearing, liners and custom chute. 23” in opening and V-12 Cat with 750-800 hp rating. INDUSTRY NEWS .................................................. 6 Boulware Equipment Provides Turnkey Solutions ............................................................... 6 Cresswood a Leader in Pallet Grinders ................ 8 CW Mill Equipment Provides Strong Service ... 12 NWPCA Joins Alliance for Sustainable Packaging ........................................................... 14 Fuelbox Names New Operations Lead & Sales Director ..................................................... 18 SAFETY ALERT - L one Worker Policies ............ 24 DEALS OF THE MONTH .................................... 26 AD DIRECTORY ................................................... 38 Morris AD Sales (888) 401-6367 Ext. 704 morris@lumbermensco.com Chris (888) 401-6367 Ext. 700 chris@lumbermensco.com Austin (888) 401-6367 Ext. 703 austin@lumbermensco.com Sam (888) 401-6367 Ext. 702 sam@lumbermensco.com PUBLISHER Woods Publishing DESIGN DIRECTOR Ted Monnin MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 (888) 401-6367 AD SUBMISSIONS May be sent to— morris@lumbermensco.com POSTMASTER Send address changes to: Lumbermens™ Magazine 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 The Tree that Started it All! Since 1986, Lumbermens™ has pub lished a month ly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. Julie (888) 401-6367 Ext. 701 julie@lumbermensco.com
JW-909632
Boulware Equipment Provides Turnkey Solutions
Boulware Equipment is 100 percent committed to repurposing and merchandising wood pallet trash. Designed with the probable end use of your particular type of wood scrap in mind, Boulware can develop a customized solution taking into consideration species, size, color, moisture content and local repurposing options. Like a wood pallet, converted wood fiber has logistical limitations. You can only transport wood fiber so far before it loses economic benefit.
13428 Victory Ln. // PO Box 124
Adams Center, NY 13606
Focused on size reduction, Boulware’s systems are designed with new and rebuilt Cresswood quality shredders. These systems have the flexibility to convert pallet wood trash to sizes suitable to meet their local customers’ needs.
Contact: J Williams
Ph: (888) 401-6367 x701
well built processor. Item ID 13820. Sam x702
Providing full turnkey solutions is Boulware’s proven formula to keep happy customers. These solutions automate reclaiming scrap, convert the wood pallet trash to the desired wood fiber product, provide delivery/transport for the lowest cost, and assist clients in finding a buyer (and a back-up buyer) for their converted wood scrap. Boulware’s approach allows customers to make one call to get the answer for their wood trash challenges.
‘83 John Deere 4850
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
Ph: (888) 401-6367 x701
motor, Rotobec
grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
Boulware helps customers improve their monthly operational profit. Boulware’s solutions also are sustainable and reduce the carbon footprint for their clients. This makes Boulware installations more valuable to their customers as companies look for sustainable suppliers who are committed to reducing landfill waste and carbon footprint reduction.
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Item ID 13185. Sam x702
Give Boulware a call and see how its staff can develop a customized solution that seamlessly integrates with your production layout while boasting the profitability of your scrap material.
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Sam x702
For more information, visit Boulware's website at www.boulwarellc.com.
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
capacity!. Item ID 13421. Sam x702
continuous
cylinders have minor leaks.
CUMMINS continuous grapple.
Runs
Great!. Item ID 13740. Sam
LOGGING EQUIPMENT RETIREMENT AUCTION IRONHORSEAUCTION.COM BEGINS CLOSING: THURSDAY, MAY
2:00PM FAIRMONT, NC ~ ROBESON CO. 800.997.2248 NCAL 3936
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
INDUSTRY NEWS
16, 2024 -
that Since 1986, published reaching sawmills, pallet makers, industrial worldwide. Woods ADVERTISING SALES Morris (888) morris@lumbermens.co MARKETING John (888) 401-6367 j@lumbermens.co DESIGN Donna Heninger Columbia, TN 38402-1916 (888) 401-6367 AD SUBMISSIONS May be sent tomorris@lumbermens.co The published Publishing, Columbia, reserved. submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and Lumberman's Exchange, principles and associates, held liable for errors Reproduction, in prohibited without ©2017 Woods Publishing ** CALENDAR** MID-ATLANTIC BIOMASS NY STATE WOODSMEN'S FIELD D AYS Fri, 18 August - S un, 20 August Fri, INFO B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Force Sharpening.............. Equipment Mfg ................................... Metalworks Shop Mill-ArmorHog Rotochopper............................ 40 Mill-Hogzilla 15 Row Electric Products ........................ Exchange .................. Empire Hydraulics 8 Select Sawmill 19 Great Lakes Mfg 34 Smith Sawmill 4 Hahn Machinery 3 The Paul Bunyan Show ......... 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Roughly hours it been in deck production machine, conveyers go airbags, includes Mcdonough pressure wheel supported an machine ve1y 130 a presses. ID S & W 125 Caterpillar hours the Set works,1 1/2" 2" band, 22ft. track 13434. carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS Ultimate Power for Unrivaled Productivity 22 HP Honda GX700 engine, 4” or 5” cylinder bore driven by 22 GPM Anfield gear pump, equipped wth manual autocycle Process Large Logs Quickly Overbuilt frame, patented driven top roll clamping system, and back roller allows for processing logs 32’ long and 24” wide Mobile Processing Weighing in at just 5500 lbs, the Pro-MP can be towed easily by any half-ton truck 2 Full Cords per Hour Hydraulic Live Deck 6’ long by 12’ wide 3-strand live deck, stores vertically with stow bar during transportation Split 2+ cords of premium firewood per hour utilizing standard 4-way or optional 6-way wedges PRO-MP FIREWOOD PROCESSOR (607) 307-4029 sales@timberwolfequip.com Machines In Stock at our Network of Dealers across North America www.timberwolfequip.com Financing Available TIMBERWOLF Starting at $39,995.95
INDUSTRY NEWS
Cresswood a Leader in Low-RPM Single Shaft Pallet Grinders
Cresswood Shredding Machinery features a range of industry-leading grinders to provide the perfect solution for your specific pallet recycling needs. From huge volumes of whole pallets to right-sized solutions for smaller volumes of
pieces off a recycling line, it has an engineered-toorder model that fits your company’s needs.
• XR500 Series: Introduced in 2020 as a small footprint solution specifically engineered for pallet manufacturers and recyclers needing to
13428 Victory Ln. // PO Box 124 Adams Center,
NY 13606
‘83 John Deere 4850
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘16 Halverson H140 Skidsteer (DEMO)
grind boards, blocks, and miscellaneous scrap from recycling lines. 3,000-5,000 lbs./hr. output capability*
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
• XR600 Series: Still the most popular choice for pallet companies in the U.S. Can easily handle both dump-andgo grinding of whole
‘13 KMC 2500 Track
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
Ph: (888) 401-6367 x701
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.
‘93 Barko 180B
Item ID: 14077
pallets as well as boards, stringers, and blocks. 4,000-7,000 lbs./hr. output capability*
Contact: Austin
Ph: (888) 401-6367 x703
• XR700 Series: This beast features a 70-inch long rotor with 20-inch diameter that provides high output characteristics and increased capability to handle extreme loads for decades. 6,500-10,000 lbs./hr. output capability*
‘95 John Deere C6
Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
• XR-2400 Series: The largest, most rugged and capable pallet grinder that Cresswood has ever manufactured. 8,000-12,000 lbs./hr. output capability.
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous
These industry-leading,
(Continued on page 10)
on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
Under Pressure” Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
“Precision
- USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT L! (888) 401-MENS
Cresswood a Leader... (Continued from page 8)
“Precision
dependable grinders allow pallet companies to increase their output volumes to a new level in low-speed, high-torque grinding while providing much lower energy consumption and cost of ownership than high-rpm equipment.
INDUSTRY NEWS
Low-rpm grinding is a quieter technology and produces substantially less dust than other size reduction solutions, so are designed to be nested within production spaces for added labor savings.
Mulch manufacturers, pellet producers, and biofuel businesses can all benefit from the
dependability and high throughput capabilities of these machines.
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
Cresswood is dedicated to ever-new technology and committed to continuous improvement through expert engineering and precision manufacturing.
For more information, visit Cresswood's website at www.cresswood.com.
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘95 John Deere C6
Tree Farmer
Item ID:
‘13 KMC 2500 Track
Contact:
well built processor. Item ID 13820.
Ph: 703
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous
on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
Under Pressure” Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email
info@empirehyd.com
Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. • Biomass Recovery • Alternative Fuels • Biomass and Co-Generation • Sawmill • Pulp ,Paper, and Pellet Plants • Compost and Mulch Operations • Recycling Facilities • Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. Customer Testimonials RA WL ING S W OO D H OG S WWW.W A ST EW OO DH OG S.C OM RAWLINGS WOOD HOGS When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running a full shift without a problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems with it.” West Fraser, Huttig, Arkansas A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) RA WL ING S W OO D H OG S WWW.W A ST EW OO DH OG S.C OM Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. • Biomass Recovery • Alternative Fuels • Biomass and Co-Generation • Sawmill • Pulp ,Paper, and Pellet Plants • Compost and Mulch Operations • Recycling Facilities • Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running a full shift without problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems with it.” West Fraser, Huttig, Arkansas RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) Customer Testimonials RAWLINGS WOOD HOGS RA WL ING S W OO D H OG S WWW.W A ST EW OO DH OG S.C OM Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. • Biomass Recovery • Alternative Fuels • Biomass and Co-Generation • Sawmill • Pulp ,Paper, and Pellet Plants • Compost and Mulch Operations • Recycling Facilities • Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running a full shift without a problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems with it.” West Fraser, Huttig, Arkansas RA WL ING S W OO D H OG S WWW.W A ST EW OO DH OG S.C OM A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) Customer Testimonials RAWLINGS WOOD HOGS RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. Biomass Recovery Alternative Fuels Biomass and Co-Generation Sawmill Pulp ,Paper, and Pellet Plants Compost and Mulch Operations Recycling Facilities Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running a full shift without a problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems it.” West Fraser, Huttig, Arkansas RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) Customer Testimonials RAWLINGS WOOD HOGS RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. • Biomass Recovery • Alternative Fuels • Biomass and Co-Generation • Sawmill • Pulp ,Paper, and Pellet Plants • Compost and Mulch Operations • Recycling Facilities • Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running full shift without a problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems with it.” West Fraser, Huttig, Arkansas RA WL ING S W OO D H OG S WWW.W A ST EW OO DH OG S.C OM A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) Customer Testimonials RAWLINGS WOOD HOGS RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM Rawlings PXZ Vertical & HZX Horizontal Super Hi-Inertia Hogs are the most productive and proven track records in some of the toughest applications that exist. • Biomass Recovery • Alternative Fuels • Biomass and Co-Generation • Sawmill • Pulp ,Paper, and Pellet Plants • Compost and Mulch Operations • Recycling Facilities • Waste To Energy Plants Custom Wood Grinding Systems The original rotary hog was invented and developed by Rawlings Manufacturing Inc. in 1977. Since then our family owned and operated company has designed, manufactured and marketed several product lines. Rawlings Wood Hogs are available in stationary, portable delivery from simple stand-alone vertical and horizontal hogs to custom wood waste recovery systems. As a proven leader in size reduction equipment we’re assisting our customers in utilizing renewable resources while reducing and recycling a wide variety of wood waste into marketable products. When the decision was made to upgrade our hog, we considered several options but had heard that the Rawlings hog had superior result when compared to other hogs once considered. The decision was easy as soon as we evaluated our options. Since the upgrade, we have realized many returns that we had hoped running a full shift without a problematic shut down. That factor alone has increased our uptime. Prior to the upgrade, the barker needed to run on lower pressures to reduce chances of plugging the hog. To summarize, the return on investment that we expected has been greatly increased and would not hesitate to recommend to anyone to invest in a Rawlings Hog system. Western Forest Products, British Columbia “Compare this to other hogs we have had were maintained at least weekly and you will see there is no comparison at all. This Rawlings machine is easier to work on, get into, and inspect than any other hog we have had. would have to say that overall, only found one drawback with this machine. You sometimes forget to check it out regularly because you never have any problems with it.” West Fraser, Huttig, Arkansas RA WL ING S W OO D H OG S - WWW.W A ST EW OO DH OG S.C OM A Proven Leader in Wood Reduction Equipment and Technology Rawlings Manufacturing, Inc. 1780 Idaho St. Missoula, Montana 59801 Genuine Rawlings Wood Hogs parts available at Rocwear Solutions, Inc. 1-866-RocWear (866-762-9327) Customer Testimonials RAWLINGS WOOD HOGS SALES PARTS SERVICE VERTICAL & HORIZONTAL MODELS AVAILABLE WOODWASTEHOGS.COM 1-866-ROCWEAR (762-9327) COMPLETE LINE-UP OF THE MOST PRODUCTIVE AND COST EFFICIENT WOOD GRINDERS
John Williams (888) 401-6367 ext. 701 j@lumbermens.co DESIGN DIRECTOR Donna Heninger EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 Columbia, Send The published Publishing, Columbia, reserved. submissions discretion be edited and been content submitted and Exchange, associates, errors in whole out CALENDAR** WOODSMEN'S FIELD D AYS www.starwebhostin Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org - USED FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. FORESTRY FUN FOR THE FAMILY (804) 737-5625 • info@exporichmond.com Sponsored by Virginia Forest Products Association & The Cooperative Extension Service at Virginia Tech EXPO RICHMOND 2024 • MEADOW EVENT PARK • DOSWELL, VA APRIL 12–13•2024 www.exporichmond.com
CW Mill Equipment Provides Strong Service & Support
“Precision Under
Over 40 years ago CW Mill Equipment Co. saw the grinding industry’s need for higher quality industrial grinders, and it has been responding to the wants and needs of the industry ever since.
When it came to industrial wood grinding, CW Mill Equipment Co. started from the ground up with a specific goal to take on the toughest applications. Its goal would drive the company to manufacture the most reliable, highest capacity grinders, and the result was the creation of the HogZilla grinder.
From stumps and logs to railroad ties and tires, the HogZilla line of equipment can handle the toughest jobs and provide the highest production rates. In addition to the relentless operation of these machines, customers appreciate the knowledgeable and committed service provided by CW Mill Equipment Co. staff. Customers can always rely on the company for support.
CW Mill Equipment Co. currently manufactures 20 standard HogZilla grinder models, including self-propelled, track driven, self-loading, and electric units. Most grinder configurations include tub grinders and horizontal feed units for wood and other waste recycling. Optional thrown object restraint and tire processing packages are available for most portable and stationary tub grinders.
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
HogZilla grinders are built to meet and exceed a customer’s needs. They are built to be reliable, for production, and heavy.
‘95 John Deere C6
CW Mill Equipment Co. manufactures the highest quality industrial grinders and believes in service after the sale. HogZilla customer support and parts availability has been top rated in the grinder industry.
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
Each product that CW Mill Equipment Co. has developed, manufactured, and offered for 50 years has been in large part customer driven. That approach is backed with experienced staff, advanced manufacturing equipment, and the will to continue to do what CW Mill Equipment Co. has done for over 50 years – innovate and adapt.
capacity!. Item ID 13421. Sam x702 BARKO
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
For more information, visit CW Mill's website at www. cwmill.com.
off onto a conveyor. This is a very well built processor. Item ID 13820.
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous
on injection pump. always started good. in good working order. 22in
MAY 3-4,
1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email
Pressure”
info@empirehyd.com
Are you serious about the forest products business?
LOGGERS’
JOIN US AT THE
EXPO – THE NORTHEAST’S BIGGEST & BEST FOREST INDUSTRY SHOW
2024, CHAMPLAIN VALLEY EXPOSITION, ESSEX JUNCTION, VERMONT For information about attending or exhibiting at the Loggers’ Expo: visit northernlogger.com email expo@northernlogger.com call 315-369-3078 Every two years thousands of hard-working people gather at the Champlain Valley Exposition to conduct serious business. The
Expo features a wide array of supplies and services, heavy equipment, and trucks – for loggers and land clearers, tree care professionals and firewood dealers, sawmillers and landowners. If you’re serious about the forest products business – you need to exhibit or attend.
Loggers’
INDUSTRY NEWS
Since published reaching pallet industrial worldwide. The published Publishing, Columbia, reserved. submissions discretion be and been content submitted and Exchange, associates, errors in out ** CALENDAR** - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it in production conveyers airbags, Mcdonough wheel machine 130 presses. hours Set 22ft. track 13434. carriage turners, carriage for STACKING L! (888) 401-MENS
“Precision Under Pressure”
NWPCA Joins Alliance for Sustainable Packaging for Foods, Group Focuses on Crafting Effective Packaging Waste Regulations
The European Union is working on finalizing new Packaging and Packaging Waste Regulations (PPWR) that will shape packaging decisions in Europe and could have ripple effects around the globe. With regulators discussing these critical issues, a group of food producers, retail organizations and the National Wooden Pallet & Container Association have joined forces to create the Alliance for Sustainable Packaging for Foods (ASPF).
This new trade group is focused on encouraging the adoption of a holistic and harmonized approach to food packaging regulation in order to achieve environmental sustainability without compromising on food safety and public health, and without increasing the environmental footprint of the food supply chain. The alliance prioritizes engagement with the on-going interinstitutional negotiations in the EU on the revision of applicable packaging and packaging waste rules, and the P2 and other packaging-related regulatory developments in Canada.
13428 Victory Ln.
// PO Box
124 Adams Center, NY 13606
‘83 John Deere 4850
Item ID:
Contact:
Ph: (888) 401-6367
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter.
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077
Contact: Austin
Ph: (888) 401-6367 x703
"When discussing the future of packaging, food safety and quality, and reducing food loss and waste are non-negotiable. Members of ASPF are clear: we are committed to significantly reducing packaging waste, just not at the expense of food safety," said Max Teplitski, PhD, International Fresh Produce Association chief science officer and chair of the ASPF.
‘13 KMC 2500 Track Skidder
Teplitski added, "We must take into account the footprint of the entire lifecycle of packaging use while maintaining food safety and addressing phytosanitary concerns. The purpose of ASPF is to find opportunities for partnership across global stakeholders to create a holistic and harmonized approach to packaging regulation, which reflects and accounts for the key outcomes central to a sustainable food supply."
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
‘95 John Deere C6
Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
The ASPF represents a broad group of companies and players who are responsible for safely feeding people around the globe. The National Wooden Pallet & Container Association (NWPCA) is the only group
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT BANDIT
capacity!. Item ID 13421. Sam x702 BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID
(Continued on page 16)
1995 Barko 775 B Feller Buncher
-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
13HP Honda motor. Manual start but electronic option is available.
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
1500 Model
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
INDUSTRY NEWS Call 877.563.8899 or 250.563.8899 www.prolenc.com If you recognize this… you need one of these. Don’t just fix it again, get the permanent solution!
Field Proven Design for the Independent Hardwood Sawmill • Corley lnfeed and Edger with Lewis Optimization - Two proven names with proven results • True Hardwood Optimization • Small footprint that fits inside most existing mills • Value priced with all of the optimization capability of more elaborate high speed Edger Optimizers For more information on our new "M" Series Edger and other Corley and Lewis products, give us a call. CORLEY SAWMILL LEWIS CONTROLS MACHINERY OPTIMIZATION Chattanooga, Tennessee Phone 423-698-0284 www.corleymfg.com Cornelius, Oregon Phone 503-648-9119 www.lewiscontrols.com
NWPCA Joins Alliance...
“Precision
(Continued from page 14)
member focused solely on using wooden pallets as transport packaging within the food supply chain.
The ASPF founding members, demonstrating the breadth of this global alliance, include: Aneberries, Canadian Produce Marketing Association, FMI - The Food Industry Association, Fruit South Africa, Frutas de Chile, International Fresh Produce Association, National Milk Producers Federation, National Council of Farmers Coops, NWPCA, North American Meat Institute, Organic Trade Association, Reusable Packaging Association, STOP Foodborne Illness, U.S. Dairy Export Council and Western Growers Association.
Jason Ortega, vice president of public affairs for the National Wooden Pallet & Container Association, commented, "The group's initial focus is on the PPWR. Our engagement aims to encourage regulators to adopt a holistic and harmonized approach to food packaging regulation that increases sustainability within the food supply chain without unintended food safety consequences."
13428 Victory Ln. // PO Box 124 Adams
Center, NY 13606
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
When asked if EU officials can meet sustainability goals while preserving food safety and the efficient movement food products, Ortega responded, "Absolutely. The challenge regulators face is that they're under a deadline, and the initial impact assessments were insufficient. We hope that through the remainder of this process and as we move into implementation, they' ll continue to engage and listen to the industry to find a good balance."
‘93 Barko 180B
Item ID: 14077
Contact: Austin
Ph: (888) 401-6367 x703
‘13 KMC 2500 Track Skidder
Item ID: 14078
A major concern is if regulators develop rules without fully understanding the implications because transport packaging exists for a reason and has a major impact on safely feeding people around the globe. "Sustainable packaging solutions for food, such as reusable packaging, can also lead to superior product protection and temperature management performance, ensuring food quality and safety and reducing waste," said Todd Hoff, executive vice president for the Reusable Packaging Association and vice chair of the Alliance.
Contact: Austin
Ph: (888) 401-6367 x703
‘95 John Deere C6
Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
The ASPF is developing working groups to interact with regulators and provide technical information that helps explain the practical implications of various
BARKO
off onto a conveyor. This is a very well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous
(Continued on page 17)
FW-16 FIREWOOD WRAPPER
‘05 Gehl CTL 70
‘83 John Deere
4850
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Item ID: JW-986495
Contact:
Ph: (888) 401-6367 x701
TheGoFastFirewoodWrapper producesbetterfirewood bundlesthantherest.
TheFW-16FirewoodWrapper isbuiltwithtruegearreduction, largebearings,andheavy-duty frames,outlastingthe competition.
Simple,Safe,andReliable.
EDGERS & GANGS
StandardFeatures:
• 1/3HP120VMotor
• ForkPockets
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Options: •WheelKits
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
•AutomaticWrapCycle!
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
2006
Item
Contact:
Ph:
a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com
Under Pressure” Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
INDUSTRY NEWS ‘14 Loader One
ProductionWithoutCompromise-THAT’STHEGOFASTWAY 1-800-854-7439 WWW.GOFASTMFG.COM IN-STOCK&READYTOSHIP!
NWPCA Joins Alliance... (Continued from page 16)
policy proposals.
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
INDUSTRY NEWS
NY
Fri, 18 August - S un, 20 August
This resource can be found on the ASPF website.
Boonville, New York www.starwebhosting.net/woodsmen/
Looking specifically at the role that pallets play in supply chains, Ortega explained, "Inherently reusable and 100% recyclable, wooden pallets support ASPF's goal of significantly reducing packaging waste. By promoting wooden transport packaging, the alliance can advocate for a circular reuse system, minimizing the environmental impact of packaging disposal."
SOUTHWEST FOREST PRODUCTS EXPO
Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
The ASPF has developed an extensive White Paper covering the implications of some PPWR developments.
There are a number of very technical considerations that must be evaluated. For example, since the 1970's, fresh foods have been packaged in a "modified atmosphere" (MAP) , which contains a different mixture of oxygen, nitrogen, carbon dioxide and other inert gases to suppress the growth of human pathogens and spoilage organisms. This process require various packaging and processes that extend the shelf life of foods without the use of harsh chemicals.
MID-ATLANTIC LOGGING & BIOMASS
For more information, visit https://www. allianceforsustainablepackaging.com.
Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING
P.O.
1916 Columbia, TN 38402-1916 (888) 401-6367
in the foothills of the Allegany Mountain range in Olean, New York. We have been in business since January 1985 producing wood bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry. We have geared our machinery to meet the needs of various producers. We offer several different types of equipment for packaging your wood from shrink wrapping, stretch wrapping and bagging. However you wish to BUNDLE we have a system for you.
AD
Send
•
•
The
•
•
All these systems provide convenient packaging of waste-wood, slabs, edgings and rewood for the consumer market.
POSTMASTER
YOUR ONE-STOP SHOP FOR BUNDLING SUPPLIES
©2017
The Tree that Started it All!
SALES
PUBLISHER Woods Publishing ADVERTISING
Morris Woods
ADDRESS
Box
SUBMISSIONS
May be sent tomorris@lumbermens.co
Lumberman's
address changes to:
Exchange P.O. Box 1916 Columbia, TN 38402
reserved.
discretion
purposes
clarity and space. Although
efforts
been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's
principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.
Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights
All editorial/ advertorial submissions are used at the
of the publisher and may be edited for
of
all
have
Exchange, its
Woods Publishing ** CALENDAR**
LOGGING & BIOMASS EXPO
MID-ATLANTIC
STATE WOODSMEN'S
FIELD D AYS
** INFO LINK** B & B Mfg 18 M&F Gauge 28 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 CW Mill-Hogzilla 15 Row Electric 20 Dyna Products ........................ 35 Sawmill Exchange 11 Empire Hydraulics 8 Select Sawmill 19 Great Lakes Mfg 34 Smith Sawmill 4 Hahn Machinery 3 The Paul Bunyan Show ......... 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and
with airbags, it includes two sets of Mcdonough pressure
p Casting wheel is supported on
This is an extremely accurate machine 130 presses. hours Set 22ft. track
CARRIAGES & DRIVES 2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw STACKING RAC www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS The WOOD-PAKER 716-373-5881 B & B Manufacturing • 3007 West River Road • Olean, NY 14760 E-mail: bbmfg@verizon.net • www.thewoodpaker.com The Number One Bundling Machine Line for Packaged Firewood THE WOOD-PAKER LINE INCLUDES:
down,
guides. To
both sides.
13434.
The WOOD-PAKER: 6 models of the HEAT SHRINK oven system.
The WRAPPER: Single person stretch wrap unit electric and manual available.
The BAGGER: A conveyor system using horizontal mesh bags.
The TILT BAGGER: Single person unit using mesh bags.
& B Manufacturing is
Affordable and Easy to Operate • INCREASE YOUR WOOD PROFITS! WOOD-PACKAGING has come
B
into its own.
Fuelbox Names New Operations Lead and Sales Director
Fuelbox Industrial, LLC recently promoted Sherman Gentry to operations lead, overseeing the entire dayto-day operations in manufacturing and shipping. Also, the company has tapped Tyler Rusomaroff as its new sales director.
Gentry has been with the company for the past two years, assuming the role of manufacturing coordinator. He spearheaded the process to set up Fuelbox's warehouse and welding center, located in Jacksonville, Florida. He has also been responsible for training and supervising new employees for manufacturing roles.
"Fuelbox is one of those rare companies you come across where you feel an automatic connection with their vision, and that's because of the passion of everyone on our team," said Gentry. Ranging from inbound to outbound operations, Gentry has worked in almost every facet of warehousing and has held critical roles in both operations and production. He worked for Target at the Food Distribution Center in Lake City, FL, for six years and was an operations technician for four
13428 Victory Ln. // PO Box 124
Adams Center, NY 13606
‘83 John Deere
4850
Item ID:
Contact:
Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
‘95 John Deere C6
years. In this role, he monitored extensive automation throughout the warehouse cranes, conveyors, and robots, both via software and through physical aspects. He became a certified trainer in each role he held. At Fuelbox, Gentry has proven himself a dedicated leader in operations, and has delivered exceptional levels of fulfillment for the company's clients.
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
Gabriel Curry, president of Fuelbox Industrial, said, "When I asked Sherman what he thought
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Manufacturing a full line of biomass fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels. Large or small scale, project management is eased with the impressively short installation time required with prefabricated modular components. with
Sam x702
LOGGING EQUIPMENT BANDIT
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
(Continued on page 19)
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Rotary Dryers
Sand Dryers
Grain Dryers
Lumber Kilns Cement Kilns
Brick Kilns
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9
CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
BELL
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
50 YEARS
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com “Precision Under Pressure” Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Clean-Burn
Innovative
Design
INDUSTRY NEWS
INDUSTRY NEWS
NY STATE WOODSMEN'S FIELD D AYS
Fri, 18 August - S un, 20 August Boonville, New York
www.starwebhosting.net/woodsmen/
the most important qualities of operations were, he said reliability, accountability, and excellent communication between departments. I couldn't agree more, and he's done a fantastic job leading our manufacturing team making our Butter Blades. I'm grateful to have his level of dedication on our team!"
The Tree that Started it All!
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Woods Publishing
ADVERTISING SALES
work in the pallet industry, and the way we set out to serve those professionals in the industry, is inspiring to me. I'm proud to take on this new role!"
SOUTHWEST FOREST PRODUCTS EXPO
Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES
LOGGING & HEAVY EQUIPMENT EXPO
Less than a week shy of his first-year anniversary with the company, Tyler Rusomaroff has proven his commitment to Fuelbox's mission and vision, and proven himself a leader within the team. The company has promoted him to the position of sales director. Rusomaroff has years of experience in sales and is dedicated to helping the Fuelbox team better serve its clients.
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MARKETING DIRECTOR
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
DESIGN DIRECTOR
Donna Heninger
MID-ATLANTIC LOGGING & BIOMASS EXPO
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
MID-ATLANTIC LOGGING & BIOMASS
BANDMILLS & HEADSAWS
Rusomaroffs background is rooted in the construction industry. He developed a passion for it at a very young age, helping his father in his granite business, and working the table saws with the company during his high school and college years. He moved to Jacksonville, FL, seven years ago with his wife, and at that time, he worked in real estate sales, as well as rehabbing houses, never losing his love for construction.
Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/
"If you ask me, everyone at Fuelbox is a rockstar. I'm grateful I get to work with and learn from everyone on this team," said Rusomaroff. He added, "Our company slogan has really become my mantra. Every time I step in the door, I know we're all working towards the same goal, ' Sparking Productivity Through Innovation.' This company is inspired by the incredible people who
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
KENTUCKY WOOD EXPO
Curry stated, "Tyler brings an amazing energy to our team. He lives out our core values,and he's willing to go above and beyond, not just for our customers, but for our team members. This is a deserved promotion, and I'm excited for the hands-on leadership he brings to the table!"
Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky
http://www.kfia.org/ KentuckyWoodExpo.aspx
THE PAUL BUNYAN SHOW
Fuelbox Industrial is a company that specializes in manufacturing and supplying band saw blades, circular saw blades, spray paint, and other niche consumables uniquely designed for the pallet industry.
Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703
For more information, visit www.fuelboxindustrial. com or call (904) 685-9323.
S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Sam x702
Austin Woods Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent tomorris@lumbermens.co
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is
monthly by Woods
2010
published
Publishing, Columbia, reserved. submissions discretion be and been content submitted and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing **
CALENDAR**
INFO LINK** 18 M&F Gauge 28 B. H. Payne .............................. 16 Meadows ................ 33 Baker 5, 7 Menominee ..................... 29 Bell's Machining ..................... 27 Metal Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 CW Mill-Hogzilla 15 Row Electric 20 Dyna Products ........................ 35 Sawmill Exchange .................. Empire Hydraulics 8 Select Sawmill Great Lakes Mfg 34 Smith Sawmill Hahn Machinery 3 The Paul Bunyan Show Hurst Boiler 14 Thomas Industrial Controls Iron Bull ................................... 21 Union Grove Saw & Kilgore Saw 22 Uni versal Refiner Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
CARRIAGES & DRIVES
Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw STACKING RAC www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives. Traditional Quality Combined With Todays Technology Call 800 752-0627 Quality Brand Reg. U.S. Pat Off Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers Traditional Quality Combined With Todays Technology Call 800 752-0627 Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed. B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com Web Site: www.paynesaws.com ‘11 Item Contact: Ph: ‘05 Trailers Log Item Contact: Ph: Waratah Computer 10500 and auxiliary IntegrIty • PrecIsIon • QualIty • Value See why we are your BeSt Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed! Ask About Our Dismanteling Blades thIn Kerf Band saw Blades Our Quality • Our Service • Our Price 1-888-857-5153 Check Out Woodmaster ‘89 Timberjack 380A Item ID: 14039 Contact: Austin Wood-Mizer LT40 Item ID: 13995 Contact: Austin Ph: (888) 401-6367 x703 ‘90 Bell Super T Item ID: 13896 Contact: Sam Ph: (888) 401-6367 x702 84/85 John Deere 440B/C Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702 John Deere Dual Arch Grapple,
Fuelbox Names New Operations Lead & Sales Director (Continued from page 18)
well built processor. Item ID 13820. Sam x702
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
‘83 John Deere 4850
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x701
capacity!. Item ID 13421. Sam x702
motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam
1990
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126
tranny PROTECT Them ALL With Pro-Tec-To® Wrap Provides Maximum Protection for Logging, Construction & Stationary Applications Like: • Debarker Buggies • Pantograph Arms • Forklift Masts • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders • Fellerbuncher Heads • Harvesting Heads • Stroke Delimbers • Dozer Blades Anywhere Hoses & Wires Are – Pro-Tec-To® Products Offers Maximum Protection, Lower Costs, Reduced Downtime and Less Spills! For The Distributor Nearest You, Call 800-355-1250 or Visit www.pro-tec-toproducts.com OEM’s, Repair Facilities & Distributor Inquires Welcome Hydraulic Lines – Fuel Hoses – Air Lines Electric Wire Bundles – Control Cables PRO-TEC-TO® WRAP & PRO-TEC-TO® SLEEVE CUT YOUR DOWNTIME AND YOUR COSTS! Protection Against Pinching, Crushing, Rubbing & Abrasion – EVEN UV RAYS! Both are Impervious to Oils and Solvents. Issue 364 Lumbermens since 1986 ❘ List seLL exchange 58” Chipper Item Contact: Ph: ‘94 Caterpillar 320 Item ID: 13936 Contact: Austin Ph: (888) 401-6367 x703 1988 440D Item# Contact: Ph: ‘88 John Deere 440D Skidder Item ID: 13781 Contact: Sam Ph: (888) 401-6367 x702 4000 hours. Torque convertor transmission. 14 hole wheels. Tires are 30.5’s at 55% and one at 80%. Center has very little slack. This skidder has been a back up skidder for the several years. Skidder has 12000 hours. Item ID 13805. Sam x702 1981 Timberjack 520 - Very hard to come by! 653 Detroit. Runs Great!. Item ID 13741. Sam x702 2002 Timberjack 608s with hot saw - Approx. 6000 hours, Machine is in very good shape and has been well maintained. Item ID 12194. Sam x702 ‘98 Timberjack 1270B - 7,300 hrs. Perkins 6 Cylinder Engine. All modules and computer are brand new. Tires on average are around 80% Video: http://youtu.be/R_ MQZe5QEFw. Item ID 13572. Chris x700 VALMET 1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Equipped Speed 40% machine maintained Hard of condition. available Item 2005 Forwarder hydraulic box in 2012. pump condition. hour.
Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. (888) 401-6367 ext. 702 Publishing, ** CALENDAR** MID-ATLANTIC BIOMASS EXPO
STATE WOODSMEN'S FIELD D AYS
18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
LOGGING & BIOMASS Fri, S www.midatlantic-logging-biomassKE Fri, 15 Sept - Sat, 16 Sept L ington, K k st.org - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, Mcdonough wheel machine 130 presses. hours Set 22ft. track hours ready to run. Item ID 13434. turners, carriage for STACKING L! (888) 401-MENS ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED: • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters • Synchronous Motors • Engine-Generator Sets • Safety Switches • DC Motors • Transformers, Single Phase • Phase Convertors Fax to: 800-248-4479 419-244-8887 419-248-4479 WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL P.O. Box 2812 • Toledo, Ohio 43606 WWW.RoWELECTRiCAL.CoM rowelec@glasscity.net ‘05 CAT TK560 ‘16 Halverson H140 Skidsteer with winch, direct drive. Comes with 6000 hour extended warranty. Has only 2600 hours. Has new 30.5 X 32 26 ply on rear and 70% does great job in hardwood. Priced to sell!. Item ID 12206. Sam x702 John Deere 20 hole Sweda wheels - These 50’s are mounted on hard No winch....they cannot fit with good and pulls good. Detroit 453 sales@rowelectrical.com Call Marvin Miller for a quote 231-924-5953 (fax) 402-966-2752 / 37590 E. Anderson Bridge Rd • Kilgore NE 69216 All Sizes Available! TOP PERFORMING, economical blades for all primary & secondary wood processing. Welded to your lengths! We also offer expert sharpening services, plus... Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping! BANDSAW BLADES ©2019 Wood-Mizer LLC 3-5
NY
Fri,
SOUTHWEST
MID-ATLANTIC
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 ‘83 John Deere 4850 Item ID: Contact: Ph: with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot 20,000lb goose neck trailer. Item ID Value! PA. Item ID 12062. Sam x702 well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 motor, Rotobec continuous on injection pump. always started good. in good working order. 22in 1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny Contact: Sam Ph: (888) 401-6367 x702 system. This machine is loaded... has pro-heat system for cold weather start. Has fire suppression ‘05 Item Contact: Ph: ‘99 511EX Item Contact: Ph: sales@toughseats.com toughseats.com Tough Meets QUALITY “WE KNOW SEATS SO YOU DON’T HAVE TO!” Direct Bolt-In Seats for Most Makes/Models 855-579-0538 TOLL FREE
James G. Murphy Co. Northwest Leader In Mill Auctions For Over 35 Years
JGM offers more than 100 years combined experience and is one of the most respected teams in the industry.
- This extensive knowledge of the industry gives us the confidence to manage a wide range of projects.
- We cover the entire wood products industry, from a whole round log to a finished cabinet and from logging equipment to sawmills to Co-Gen plants.
- Since 2000, we have completed more than 800 wood products industry auctions and appraisals.
- Our comprehensive USPAP appraisals provide detailed documentation and valuation of assets.
- A JGM representative is onsite weeks prior to the auction to organize and clean the site as well as prepare all equipment for auction.
- Following auction day, a JGM representative stays on location to manage auction purchase removal.
- The James G. Murphy Company also has a long history of providing appraisals for Wood Products related machinery and equipment.
- Cabinetry & Furniture Plants to Large & Small Log Sawmills, Plywood Mills, Veneer Plants, Reman Plants, Cedar & Redwood Lumber, Treating Plants, Oriented Strand Board Mills, Pellet Mills, Co-Gen Plants and Logging.
The Tree Started it All! Since Lumbermens has published a monthly circular reaching pallet industrial worldwide. The published Publishing, Columbia, reserved. submissions discretion be and been content submitted and Exchange, associates, errors in out ** CALENDAR** NY STATE Fri, 18 www.starwebhostin SOUTHWEST Fri, 25 Hot www.arkloggers 2ND GGING Thurs, MID-ATLANTIC Fri, S ww.midatlantic-logging-biomassexpo.com/ KENTUCKY Fri, L http://www.kfia.org KentuckyWoodExpo.aspx THE Fri, ww INFO LINK** 18 M&F 16 Meadows 7 Menominee 27 Metal 31 Midwest 36 Mor 32 Multitek 25 Piper's 17 Rotochopper 15 Row 35 Sawmill 8 Select 34 Smith 3 The 14 Thomas 21 Union 22 Uni ................................. 24 WoodMizer ................................ - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it in production conveyers airbags, Mcdonough wheel is supported on both sides. This machine 130 presses. hours Set 22ft. track 13434. carriage turners, carriage for STACKING L! (888) 401-MENS Every Reputable Wide Band Supplier Offers 3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff. Got a Wide Band Problem? Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro! BUT ONLY THE BY MENOMINEE SAW GUARANTEES WOLVERINE WWW. MENOMINEESAW.COM TOLL FREE 1-800-582-0470 900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com and no winch. Center pins are tight and extra fuel tank. Item ID 13929. Sam x702 Skidder - Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702 2015 Tigercat 234B Loader - Model 234B. Only 300 hours on this roatation on the grapple w/ a 30’ reach on the boom. Joystick 2006 Tigercat 630C Grapple Skidder - Very good running
Go To
For More Information or Call Us At 425.486.1246 Scan With Phone For More Information
Murphyauction.com
SAFETY ALERT
Lone Worker Policies
BACKGROUND
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077
Contact: Austin
Ph: (888) 401-6367 x703
It is estimated that there are as many as 53 million lone workers across North America and Europe, approximately 15% of the workforce. Companies within the wood products industry must consider policies and procedures to keep their lone workers safe while executing their work. Examples of potential lone workers in the industry include foresters, truck drivers, mill workers, consultants, and loggers. Many of these workers will be in areas that do not have cell phone coverage, nor will they be in populated areas due to the nature of the work. Working alone can increase the risk of serious injury and response times, especially when the lone worker is performing activities in remote locations.
There are many ways that companies can manage risks for lone workers, whether it be through monitoring with technology or utilizing policies and procedures to create a safe work environment for their employees. To create a comprehensive lone worker program, companies must assess the work environment, understand the risks, and mitigate these circumstances to the best of their ability.
‘13 KMC 2500 Track Skidder
‘95 John Deere C6
Tree
Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
WHAT SHOULD BE INCLUDED IN A LONE WORKER POLICY/PROGRAM
13428 Victory Ln. // PO Box 124
Adams Center, NY 13606
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
Lone worker policies should be very clear on who/when employees are considered to be working alone so that when workers are executing tasks, they understand if the lone worker policy applies to their circumstances. Lone worker policies should also include assessments that identify risks broken down by job role so that lone workers understand the risks associated with their roles and how those risks can be mitigated through actions that the company takes. For example, when lone workers leave the office on employer business, the employer should know where the employee is going, check-in times, and when the employee should return to the office.
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams
capacity!. Item ID 13421. Sam x702
BARKO
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
‘83 John Deere
Ph: (888) 401-6367 x701
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
Supervisors and employees should have a clear understanding of their responsibilities when employees are working alone, and any lone worker policy or program should include a clear outline of how to report hazards or incidents.
4850
ASSESSING THE RISK FOR LONE WORKERS
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Lone workers are essential to the wood products industry and perform many vital roles. One way to assess the risk is to look at the jobs from different perspectives and analyze the risk of the position by evaluating people risk, environmental risk, task-based risk, and experience-based risk.
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Sam x702
LOGGING EQUIPMENT BANDIT
• People Risk involves evaluating risks when working in proximity to individuals who pose a potential risk to the worker, such as foresters cruising publicly accessible timber during hunting season, with the risk being a hunter. One way to mitigate this type of risk is to require that employees wear highvisibility clothing/ PPE to assist hunters in identifying workers.
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
• Environmental risk is when the workplace itself poses a risk to personal safety, for example when inclement weather creates dangerous situations for lone workers.
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
• Task-based risk arises from the nature of the task being dangerous, such as using a chainsaw or operating machinery on a dangerous slope.
BELL
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
• Experience-based risk is where the worker does not have the necessary expertise or experience in dealing with unusual situations or the task under the circumstances.
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com “Precision Under Pressure” Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Since published reaching pallet industrial worldwide. The published Publishing, Columbia, reserved. submissions discretion be and been content submitted and Exchange, associates, errors in out ** CALENDAR** - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it in production conveyers airbags, Mcdonough wheel machine 130 presses. hours Set 22ft. track 13434. carriage turners, carriage controls, for STACKING L! (888) 401-MENS
Item ID: 5632
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
HOT BUYS
‘83 John Deere 4850
Item ID: 5519
Item ID: 14073
NOTCHER (CHALLENGER MACHINE BUILT)
Item ID: 2125
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘05 Gehl CTL 70
Item ID:
Contact:
Ph: (888) 401-6367 x701
Item ID: 5641
Contact: AUSTIN
Contact: Austin
Ph: (888) 401-6367 x703
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
Item ID: 5549
FIREWOOD PROCESSORS
Contact: AUSTIN
Contact: AUSTIN
Email: Austin@lumbermensco.com
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Item ID: 3753
Contact: JOE
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Item ID: 3686
Ph: (888) 401-6367 x703
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Item ID: 5612
Contact: AUSTIN
Email: Austin@lumbermensco.com
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
CAT D6K2
Item ID: 1488
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘95 John Deere C6
TIMBERKING B20 SAWMIL
Item ID: 5559
capacity!. Item ID 13421. Sam x702
Contact: AUSTIN
BARKO
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
Item ID: 3574
Item ID 13185. Sam x702
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
Item ID: 5007
BELL
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
2016 WOODMIZER LT-40HD
2018 WOODMIZER LT-50 SUPER
2019 WOODMIZER LT-70 SUPER WIDE
2022 WOODMIZER LT-40 SUPER WIDE HD
2020 WOODMIZER LT-40 WIDE
JD 550G LT
12′ JD 550K LGP
14′ JD 650K LGP
13′ WOODMIZER LT-3000 OPERATION
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
1996 TIMBERJACK 380C
Item ID: 4825
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 4710
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 2694
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
TIMBERJACK 208
Item ID: 5320
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
INT'L
CABLE SKIDDER
Item ID: 5568
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
CAT 225LC EXCAVATOR
Item ID: 5419
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
86′ TIMBERJACK 230A
Item ID: 3605
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Item ID: 1966
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 540D
Item ID: 5249
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
FMC 210
Item ID: 5526
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 5582
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
FRANKLIN 170 SKIDDER
Item ID: 3517
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
90′ TIMBERJACK 240A
Item ID: 5082
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
98′ JOHN DEERE 640E
Item ID: 2701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
06′ JOHN DEERE 335
LOG LOADER
Item ID: 5403
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
JOHN DEERE 440C
Item ID: 5242
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. PUBLISHER John (888) 401-6367 ext. 701 j@lumbermens.co DESIGN DIRECTOR Donna Heninger EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co AD SUBMISSIONS May be sent tomorris@lumbermens.co POSTMASTER Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published Publishing, Columbia, reserved. submissions discretion be and been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing ** CALENDAR** NY STATE WOODSMEN'S FIELD D AYS Fri, 18 August Boonville, www.starwebhostin net/woodsmen/ SOUTHWEST EXPO Fri, 25 Hot www.arkloggers.com 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selm ww.midatlantic-logging-biomassKENTUCKY Fri, 15 Le http://www.kfia.org/ KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org INFO LINK** B & B 18 M&F 28 B. 16 Meadows 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog 17 Rotochopper............................ 40 15 Row 20 35 Sawmill 11 8 Select 19 34 Smith 4 Hahn Machinery 3 The Bunyan 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W
Sam x702 CARRIAGES & DRIVES carriage
STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS
125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
LOGGING
JOHN DEERE 440C’S PACKAGE DEAL
02′ JOHN DEERE 640G2
98′ JOHN DEERE 640G
1983 JOHN DEERE 640C
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
TIMBERJACK 208
Item ID: 5320
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
PRENTICE 210B
Item ID: 5085
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
13428 Victory Ln. // PO Box 124
643J
BELL SUPER T CUTTER
‘16 Halverson H140
Item ID: JW-909632
Contact: J Williams
2022 TIGERCAT 620H
(888) 401-6367
TAJFUN EQUIPMENT
Item ID: 5334
Ph: (888) 401-6367 x701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 5368
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘13 KMC 2500 Track
Item ID: 14078
13′ BARKO 595ML MAGNUM
Contact: Austin
‘95 John Deere C6
TIMBERJACK 1010
Item ID: 4907
Adams Center, NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘83 John Deere 4850
TIMBERJACK 1270
Item ID: 14073
Item ID: 5199
Contact: Austin
Contact: AUSTIN
Ph: (888) 401-6367 x703
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
04′ TIGERCAT 620
Item ID: 4952
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘05 Gehl CTL 70
Item ID:
Contact:
Ph:
2016 TAJFUN 400 JOY
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Item ID: 5227
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
18′ JOHN DEERE 753J
Item ID: 4974
Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
LIEBHERR A312 WITH RYANS HEAD
Item ID: 4979
Contact: AUSTIN
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
Item ID: 5358
capacity!. Item ID 13421. Sam x702 BARKO
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.
CAT 538
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Item ID: 5302
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
FIREWOOD PROCESSORS
Item ID: 4705
Contact: AUSTIN
Item ID: 4968
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
(C) 931-797-8029
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
CAT D5H TSK
Item ID: 4939
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
TIMBCO 445EXL
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
BELL
Item ID: 5293
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
LOGGING
TIMBERJACK 380C
GRAPPLE SKIDDER
Item ID: 863
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
PRENTICE 384
KNUCKLEBOOM LOADER
Item ID: 978
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
16′ JD 700K
Item ID: 4343
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
06′ JD 700J LGP
Item ID: 3787
Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker available. Buyer pays for trucking, About 80mi south of Louisville, KY
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
2009 JOHN DEERE 548G3
Item ID: 4699
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOG LOADER
EXCAVATOR 225 LC
Item ID: 1067
Contact: MOSE
Phone: 208-290-1888
1979 TIMBERJACK 230
CABLE SKIDDER
Item ID: 1072
Contact: KYLE
Phone: 807-631-4081
14′ JOHN DEERE 748H
Item ID: 2707
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
725B TIMBERPRO
Item ID: 1398
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
’92 TIMBERJACK 450C
Item ID: 1369
Contact: ROBERT
Phone: 606-875-4783
JOHN DEERE 550G
CRAWLER DOZER
Item ID: 5388
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
JOHN DEERE 648D
Item ID: 547
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
2016 HYPRO 755HB PROCESSOR
Item ID: 2593
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses.
TIMBCO 425D
Item ID: 1429
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Sam x702
460 TIMBERJACK
carriage turners, carriage controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
Item ID: 1124
Contact: MARCUS
Phone: 660-833-9061
TIGERCAT 822
Item ID: 1130
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
that Started it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co DESIGN DIRECTOR Donna Heninger EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co AD SUBMISSIONS May be sent tomorris@lumbermens.co POSTMASTER Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing ** CALENDAR** NY STATE WOODSMEN'S FIELD D AYS Fri, 18 Boonville, www.starwebhostin net/woodsmen/ SOUTHWEST EXPO Fri, 25 Hot www.arkloggers.com 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selm ww.midatlantic-logging-biomassKENTUCKY Fri, L http://www.kfia.org KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org INFO LINK** 18 M&F 28 16 Meadows Mill, 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog 17 Rotochopper............................ 40 15 Row 20 35 Sawmill 8 Select 19 34 Smith 4 Hahn Machinery 3 The Bunyan 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the
CARRIAGES DRIVES
STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS
PRICING AND LOCATION
VISIT WWW.LUMBERMENSCO.COM LOGGING
TO VIEW DESCRIPTION,
-
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
04′ JD 450H
Item ID: 4327
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
TIMBER JACK 450B
GRAPPLE SKIDDER
Item ID: 5452
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
13428 Victory Ln. // PO Box 124
98′ TJ 460
Item ID: 4918
NY 13606
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
‘83 John Deere 4850
648G III SKIDDER
Item ID: 14073
Item ID: 5647
Contact: Austin
Contact: JOE
JOHN DEERE 848L
Item ID: 1184
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘05 Gehl CTL 70
Item ID:
Contact:
Ph:
TJ 450B
Item ID: 5098
Contact: JOE
Email: Joe@lumbermensco.com
Ph: (888) 401-6367 x703
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
90′ JD 550G
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
JD 648L
‘16 Halverson H140
Item ID: JW-909632
(888) 401-6367
12′ JD 648H
Contact: J Williams
02′ CASE 650H
Item ID: 5253
Ph: (888) 401-6367 x701
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
Item ID: 3511
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘13 KMC 2500 Track
Item ID: 14078
15′ TIGERCAT 610E
Contact: Austin
Item ID: 4944
Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
14′ TIGERCAT 720E
Item ID: 1617
Contact: AUSTIN
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
’95 JOHN DEERE
548G II SKIDDER
FIREWOOD PROCESSORS
Item ID: 3873
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
(C) 801-362-2170
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Item ID: 5073
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Item ID: 5605
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
‘95 John Deere C6
JOHN DEERE 643K
Item ID: 1531
capacity!. Item ID 13421. Sam x702 BARKO
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
92′ CAT D5H
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Item ID: 4678
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Runs Great!. Item ID 13740. Sam x702
JOHN DEERE 753J
Item ID: 1582
Contact: AUSTIN
BELL
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Adams Center,
LOGGING
03′ JOHN DEERE
98′ CAT 515
Item ID: 4671
Since
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
John
TJ 460D
Item ID: 3286
Contact: JOE
Donna Heninger
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
AD
02′ CAT 525B
Item ID: 3214
Contact: JOE
2004 JOHN DEERE 648G3
Item ID: 2628
Contact: AUSTIN
72ND
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
13′ JD 648H
Item ID: 3589
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
MID-ATLANTIC
06′ TIGERCAT 635C
Item ID: 3322
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
2013 JOHN DEERE 848H
Item ID: 2646
Contact: AUSTIN
04′ TIMBERJACK 460D
Item ID: 2724
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
04′ JOHN DEERE 648G3
Item ID: 2791
Contact: AUSTIN
00′ JD 748G III
Item ID: 3210
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
98′ JOHN DEERE 648
Item ID: 2798
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
02′ TJ 660D
Item ID: 4088
Contact: JOE
Email: Joe@lumbermensco.com
Send
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
99′ FRANKLIN 170
Item ID: 4586
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
15′ CAT 525D
Item ID: 3172
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
CLARK F666 RANGER
Item ID: 3233
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
12′ TIGERCAT 620D
Item ID: 2753
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
it
All!
1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
(888) 401-6367 ext. 701 j@lumbermens.co
DESIGN DIRECTOR
EQUIPMENT REPS
SUBMISSIONS
sent
May be
tomorris@lumbermens.co POSTMASTER
Lumberman's
P.O.
Columbia,
address changes to:
Exchange
Box 1916
TN 38402
Columbia, reserved. submissions discretion be and been made to ensure accuracy of content submitted
advertisers
errors
out
consent.
The Lumberman's Exchange published Publishing,
by
and writers, the Lumberman's Exchange, its principles and associates, are not held liable for
or omissions. Reproduction, in whole or part, is prohibited with
written
** CALENDAR**
©2017 Woods Publishing
WOODSMEN'S FIELD D AYS Fri, 18 Boonville,
EXPO Fri, 25 Hot
NY STATE
www.starwebhostin net/woodsmen/ SOUTHWEST
www.arkloggers.com
ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
LOGGING
BIOMASS
15
16
Selm ww.midatlantic-logging-biomassKENTUCKY Fri, L http://www.kfia.org/ KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org INFO LINK** 18 M&F 28 16 Meadows 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog 17 Rotochopper............................ 40 15 Row 20 35 Sawmill 8 Select 19 34 Smith 4 Hahn Machinery 3 The Bunyan 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM LOGGING
&
Fri,
Sept - Sat,
Sept
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
83′ TJ 380A
Item ID: 2133
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
13′ CAT 545C
Item ID: 2117
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
13428 Victory Ln. // PO Box 124
CAT 515
Adams
Item ID: 1739
NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
‘83 John Deere 4850
15′ CAT 559C LOADER
Item ID: 14073
Item ID: 5534
Contact: Austin
04′ JD 435 II
Item ID: 4169
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘05 Gehl CTL 70
Item ID:
Contact:
Ph:
17′ JD 437E
Item ID: 4809
‘16 Halverson H140
Item ID: JW-909632
Contact: J Williams
08′ JD 535 SERIES II
(888) 401-6367
10′ JOHN DEERE 648H
Item ID: 4580
Ph: (888) 401-6367 x701
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Item ID: 1847
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
‘13 KMC 2500 Track
Contact: Austin
CAT 515
Ph: (888) 401-6367 x703
Item ID: 1509
Contact: ERVIN
Phone: (641) 229-1012
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
TIMBERJACK 460
Item ID: 1777
Contact: AUSTIN
‘95 John Deere C6
04′ TIMBERJACK 460D
Item ID: 5445
capacity!. Item ID 13421. Sam x702 BARKO
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
00′ TIGERCAT 245
Ph: (888) 401-6367 x703
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
TIMBERJACK
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
240A
GRAPPLE SKIDDER
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
TIGERCAT 630E
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Item ID: 4685
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
FIREWOOD PROCESSORS
Item ID: 1769
Contact: AUSTIN
Item ID: 1098
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
(C) 931-797-8029
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
13′ TIGERCAT 234
Item ID: 4803
Contact: JOE
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Runs Great!. Item ID 13740. Sam x702
95′ PRENTICE 210E
Item ID: 3628
Contact: JOE
BELL
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Center,
LOGGING
TO VIEW DESCRIPTION, PRICING AND LOCATION -
98′ PRENTICE 280
Item ID: 2166
Since
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
John
VALMET 840.4
Item ID: 1222
Contact: AUSTIN
Donna
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
JOHN DEERE 1010D
Item ID: 1715
Contact: JAKE
Phone: (440) 537-5124
KOBELCO 250 LOG LOADER
Item ID: 2584
Contact: AUSTIN
Email: Austin@lumbermensco.com
08 ROTTNE H14
Item ID: 2062
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
2004 PONSSE ERGO HARVESTER
Item ID: 2656
Contact: JOE
Email: Joe@lumbermensco.com
2004 PRENTICE 384
Item ID: 2637
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
08′ TIMBCO 415EX
Item ID: 1661
Contact: AUSTIN
Email: Austin@lumbermensco.com
(C) 931-797-8029
Sam
2014
PONSSE SCORPION KING
Item ID: 4914
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
VALMET 840.2 FORWARDER
Item ID: 741
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
VALMET 644
Item ID: 1480
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
MORBARK 6036 CHIPPER
Item ID: 1084
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
14′ JOHN DEERE 437D
Item ID: 2740
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 1270
Item ID: 1350
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Sam x702
MORBARK MODEL 20
CHIPHARVESTER
Item ID: 1246
Contact: SAM
carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
Email: Sam@lumbermensco.com
Item ID: 1035
Contact: RON
Phone: (606) 595-1734
it All!
1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
(888) 401-6367 ext. 701 j@lumbermens.co DESIGN DIRECTOR
Heninger
REPS
EQUIPMENT
Wall (888) 401-6367 ext. 702 sam@lumbermens.co
SUBMISSIONS
be sent tomorris@lumbermens.co POSTMASTER
address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange published Publishing, Columbia, reserved. submissions discretion be and been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.
Woods Publishing ** CALENDAR** NY STATE WOODSMEN'S FIELD D AYS Fri, 18 Boonville, www.starwebhostin net/woodsmen/ SOUTHWEST EXPO Fri, 25 Hot www.arkloggers.com 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selm ww.midatlantic-logging-biomassKENTUCKY Fri, Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org INFO LINK** 18 M&F 28 16 Meadows 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog 17 Rotochopper............................ 40 15 Row 20 35 Sawmill 11 8 Select 19 34 Smith 4 Hahn Machinery 3 The Bunyan 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours
AD
May
Send
©2017
CARRIAGES & DRIVES
STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS
LOGGING
VISIT WWW.LUMBERMENSCO.COM
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
12′ JD 643K
Item ID: 4896
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
15′ TIGERCAT 724 G
84′ CAT 518
ROTOSAW CUTTER
Item ID: 3144
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
15′ CAT 553C FELLER BUNCHER
‘93 Barko 180B
‘16 Halverson H140
Item ID: JW-909632
Item ID:
Contact:
Ph: (888) 401-6367
08′ JD 843J
Contact: J Williams
05′ HYDRO-AX 721E
Item ID: 2109
Ph: (888) 401-6367 x701
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Item ID: 3644
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘13 KMC 2500 Track
Item ID: 14078
Contact: Austin
17′ JOHN DEERE 843L
‘95 John Deere C6
07′ TIMBCO 445EXL
Item ID: 3392
Adams Center, NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 5495
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Item ID: 2731
Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is
Item ID: 2046
capacity!. Item ID 13421. Sam x702 BARKO
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS
& GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
13428 Victory Ln. // PO Box 124
13HP Honda motor. Manual start
Chipper - Cat Under Carriage at
LOGGING
EST 1986 LIST SELL EXCHANGE BUY SAVE Visit our NEW Merchandise Store www.lumbermenco.com
09′
Since
WOODMIZER LT 300
Item ID: 4549
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
EARLY
John
90’S MELLOTT DEBARKER
Item ID: 3329
Contact: JOE
Donna
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Sam
FENCE POST PROCESSING
Item ID: 1231
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2017 TIMBERKING 2200
Item ID: 5513
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2014 BAKER 13′ SAWMILL
Item ID: 4910
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
CORNELL SIZER
Item ID: 1322
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
TIMBERKING B20
SAWMILL
Item ID: 5559
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2007 TIMBERKING B20
Item ID: 5540
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
hours ready to run. Item ID 13434.
Sam x702
19′ MORGAN MILITARY NOTCHING
carriage turners, carriage
BAND SAW
Item ID: 3567
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
LT40
WOODMIZER
Item ID: 2419
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
2019 TIMBERKING 2000
Item ID: 5508
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
GO
FAST RUN AROUND SYSTEM
Item ID: 1200
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact:
Item
sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
Email:
Phone:
2006 WOODMIZER LT-40
SUPER HD PORTABLE SAWMILL
Item ID: 5425
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
it All!
1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. MARKETING DIRECTOR
Williams (888) 401-6367 ext. 701 j@lumbermens.co DESIGN DIRECTOR
Heninger EQUIPMENT REPS
Wall (888) 401-6367 ext. 702 sam@lumbermens.co (888) 401-6367 AD SUBMISSIONS May be sent tomorris@lumbermens.co POSTMASTER Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing ** CALENDAR**
STATE WOODSMEN'S FIELD D AYS Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/ SOUTHWEST F EXPO Fri, 25 August gust Hot Springs, www.arkloggers.com 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO
7 Sept - Sat, 9
Escanaba, Michigan
LOGGING & BIOMASS Fri, 15 Sept - Sat, 16
Selm ww.midatlantic-logging-biomassKENTUCKY Fri, 15 Lex http://www.kfia.org/ KentuckyWoodExpo.aspx THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org INFO LINK** 18 M&F 28 16 Meadows 33 Baker 5, 7 Menominee Saw ..................... 29 Bell's Machining ..................... 27 Metal Detector's Inc 30 Brute Force Mfg...................... 31 Midwest Sharpening.............. 26 Buck Equipment (AIM) 36 Morbark 9 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks 25 Piper's Saw Shop 13 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 CW Mill-Hogzilla 15 Row 20 Dyna Products ........................ 35 Sawmill 11 Empire Hydraulics 8 Select 19 Great Lakes Mfg 34 Smith 4 Hahn Machinery 3 The Paul Bunyan Show ......... 39 Hurst Boiler 14 Thomas Industrial Controls..... 10 Iron Bull ................................... 21 Union Grove Saw & Knife 2, 37 Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and of all equipment at www.LumberMB\ISmagazine.com & HEADSAWS Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400
NY
Thurs,
Sept
MID-ATLANTIC
Sept
CARRIAGES & DRIVES
STACKING www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM SAWMILL
HURDLE SAWMILL
ID: 4949
AUSTIN
Austin@lumbermensco.com
931-797-8029
888-401-6367 EXT 703 (C)
Buying? Selling? lumbermensco.com • 888.401.6367
TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM
BAKER DOMINATOR FULL OPERATION
Item ID: 5274
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2019 WOODMIZER LT-70 SUPER WIDE
17′ COOKS AC36 SAWMILL
Item ID: 5019
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
13428 Victory Ln. // PO Box 124
2017 HURDLE SAWMILL
MISCELLANEOUS
Adams Center, NY 13606
Item ID: 5191
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘83 John Deere 4850
01′ MACK RD688
Item ID: 14073
Item ID: 4479
Contact: Austin
Contact: JOE
Ph: (888) 401-6367 x703
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
NYLE FIREWOOD DRY KILN
Item ID: 3588
FIREWOOD PROCESSORS
Contact: AUSTIN
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703
(C) 931-797-8029
Item ID: 5025
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘05 Gehl CTL 70
Item ID:
Contact:
Ph:
MACK TRUCK WITH HOOD LOADER
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Item ID: 1089
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
WARRATAH FS20
Item ID: 2100
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709
(C) 801-362-2170
‘93 Barko 180B
‘16 Halverson H140
Item ID: JW-909632
Contact: J Williams
TAJFUN 480 PLUS JOY
Item ID:
Contact: Austin
Ph: (888) 401-6367 x703
EDMISTON 6HEAD BLOCK SAW
Item ID: 568
Ph: (888) 401-6367 x701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 5342
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘13 KMC 2500 Track Skidder
Item ID: 14078
PRECISION 742H DEBARKER
Contact: Austin
Item ID: 5350
Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
WINCH FOR SALE
Item ID: 5413
Contact: AUSTIN
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
98′ INTERNATIONAL LOG TRUCK
Item ID: 5057
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
‘95 John Deere C6
16′ COOKS AE4P EDGER
capacity!. Item ID 13421. Sam x702
Item ID: 5013
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
GREAT LAKES LOG TRAILER
SERCO 7000
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Item ID: 1946
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Runs Great!. Item ID 13740. Sam x702
LOG MAX 7000
Item ID: 1051
BELL
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
BARKO
SAWMILLS
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077
Contact: Austin
Ph: (888) 401-6367 x703
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
‘95 John Deere C6
Tree
Farmer
Item ID: 13920
Contact:
Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
1990
Issue 434 Lumbermens™ since 1986 ❘ List seLL exchange buy save ❘ LumbermensCO.com Phone 315.284.4126
20,000lb goose neck trailer. Item ID
Value!
PA.
Item ID 12062. Sam x702
BELL
Bell Super T - This Bell
brand
engine. Lever control, 33” bar, pump and tranny
has a
new Duetz
Austin
AD DIRECTORY If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: Lumbermens™ Magazine 1116 W 7th St., Ste. 297 Columbia, TN 38402 *Company name and address required to process your change. PLEASE PRINT Company Name*: Individual Name: Address: City: State: Zip: Phone: Email: APRIL 2024 ❑ Please Add ❑ Please Change ❑ Please Remove Air Systems Mfg. ........................... 25 ............................... 828-757-3500 Anson 13 800-663-7723 B & B Mfg. 17 716-373-5881 B. H. Payne ..................................... 19 ............................... 800-752-0627 Buck Equipment (AIM) ................. 22 ............................... 800-803-3365 Cord King 4 888-219-WOOD Corley Mfg 15 423-698-0284 CW Mill ........................................... 8, 10, 39 .................... 800-743-3491 Expo Richmond 2024 11 804-737-5625 F&R Mfg. ......................................... 20 ............................... 800-355-1250 GoFast Manufacturing ................. 16 ............................... 800-854-7439 Great Lakes Mfg. 20 877-248-5677 Holtec 3 holtecusa.com Hurdle Machine Works Inc ......... 40 ............................... 901-877-6251 Hurst Boiler. ................................... 18 ............................... 877-774-8778 Industrial Seating 23 53-266-6885 Iron Horse Auction Company 6 800-997-2248 James G. Murphy Co. 23 425-486-1246
Saw Company .................. 19 ............................... 888-857-5153 Lignomat ......................................... 16 ............................... 800-227-2105 L-M Equipment Company Ltd. 1 800-455-8807 Lumbermens Wanted 37 931-797-8029 Lumbermens Web Store .............. 34 ..............www.lumbermenco.com Menominee Saw............................ 23 ............................... 800-582-0470 Metal Detectors Inc. 22 541-345-7454 Midwest Sharpening 21 231-924-5953 Multitek North America, LLC ..... 21 ............................... 800-243-5438 Northeast Implements, Inc.......... 20 ............................... 607-589-6160 NE Forest Products Equip Expo..... 12 ............................... 315-369-3078 Pantron Automation, Inc. 38 800-211-9468 Piper’s Saw Shop..................... 8 800-845-6075 Prolenc Manufacturing Inc.......... 14 ............................... 877-563-8899 Rawlings Wood Hogs ................... 10, 22 ........................ 866-762-9327 Row Electric.............................. 21 800-248-4479 Ryan's Equipment 10 989-427-2829 Smith Machine Worx.................... 9 .................................. 205-620-4455 Smith Sawmill Service .................. 2 .................................. 800-598-6344 Timberwolf Firewood Proc. Equip. 7 607-307-4029 Tough Seats 22 855-579-0538
Kilgore
errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing ** CALENDAR** NY STATE WOODSMEN'S FIELD D AYS Kilgore Saw 22 Uni versal Refiner 23 Lignomat ................................. 24 WoodMizer ................................ l - USED FORESTRY EQUIPMENT FOR SALE l§ SELL YOUR EQUIPMENT TODAY 0 24/7 SUPPORT FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and www.BakerProducts.net 800.S48.6914 I S73.663.7711 L! (888) 401-MENS
LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401