Lumbermens May 2023 Magazine

BEAT BANDSAW WORK EVERY TIME WITH THE ULTIMATE PORTABLE

BLADES LAST FOR YEARS

REDUCES HANDLING LUMBER

SIMPLE TO LEARN & OPERATE

TAKES ON ANY DIAMETER LOG

CUTS LOGS INTO LUMBER FASTER

CUTS STRAIGHT LUMBER RELIABLY

FAST, SAFE, EFFICIENT & ACCURATE

PRODUCES VALUABLE BY-PRODUCT CHIPS

Contact: Austin

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

MANUAL MILLS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

MILLING MADE EASY

but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

FIREWOOD PROCESSORS

Turbosawmill make the world’s premier automated sawmill, available right across the US.

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

We utilize proven swing-blade technology to help every customer save time and money, and to always get the best cut lumber.

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

Item ID 13694. Sam x702

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams (888) 401-6367 x701

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

• Wedge and splitter design to suit your needs

• 24 to 72 ton splitting capability

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

• The fastest splitting cycle time

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

775 B

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

Facts to consider:

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

capacity!. Item ID 13421. Sam x702

1995 Barko

Feller Buncher

‘95 John Deere C6

2019 Cord King Line-up

SOUTHWEST

that Started

Since published reaching pallet industrial worldwide.

Send address changes to: Lumberman's Exchange

P.O. Box 1916

Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, and printing material contained within. We shall not be liable for omissions or typographical errors.

©2017 Woods Publishing

CABLE SKIDDERS

1997 TIMBERJACK 240C

1997 Timberjack 240C with powershift transmission, hard to find skidder that still has low hours on it, only around 6500 original hours. Has gearmatic winch, good pins and bushings, and no bad leaks anywhere. Call for more info.

Item ID 100096. Austin x703

JOHN DEERE 440C'S PACKAGE DEAL

13428

Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily. The other has the transmission out of it,

the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

Item ID 100094. Austin x703

2014 JOHN DEERE 640H

2014 Model John Deere 640H cable skidder with 1300 original hours, skidder is in mint condition, its a one owner machine, excellent rubber, tight, and clean as a whistle. Call for more information.

Item ID 100091. Austin x703

79' TIMBERJACK 225D

79’ Timberjack 225d Has new 4BT Cummins engine with 1000 hours on it. New brakes

Item ID: JW-986495

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: J Williams Ph: (888) 401-6367 x701

New tires on back New parking brake Tight center section

Really tight skidder for the age. Also Comes with another set of 23.1 tires and a brand new set of chains.

Item ID 100087. Austin x703

97' TIMBERJACK 240C

94U model. Tires are size 34.5. Woods ready.

Item ID 33681. Austin x703

DOZERS

WITH WINCHES

JOHN DEERE 750K

‘13 KMC 2500 Track Skidder

Item ID: 14078

1997 Timberjack 240C has freshly rebuilt 4BT cummins engine with 50 hours on it, as well as rebuilt 4 speed new process transmission. Comes with 23.1 tires at around 50%. Call for more info.

Item ID 100076. Austin x703

Contact: Austin Ph: (888) 401-6367 x703

84' JOHN DEERE 440C

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

1984 John Deere 440C has freshly rebuilt engine, tight pins and bushings, as well as all new hoses. No leaks, woods ready skidder. Call for more info.

Item ID 100075. Austin x703

84' JOHN DEERE 540B

1984 John Deere 540B just had the winch completely rebuilt, no motor or trans work recently, but both are strong and don't bur any oil. Call for more info.

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Item ID 100074. Austin x703

Sam x702

LOGGING EQUIPMENT BANDIT

97' JOHN DEERE 640G

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

1997 model John Deere 640G, pulling wood daily, has new rearend, new center section, and new hydraulic pump in it. Motors been done couple years ago, call for more info.

Sam x702

Item ID 100070. Austin x703

2004 Bandit Beast Model 4680 -

CAT 518 CABLE

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Early 90's Cat 518 cable skidder, has cat winch, and cat motor in it in good shape. Tight center section, no leaks on it. Comes with decals if interested. Serial number is

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

2014 model John Deere 750K currently has 3700 hours on it, equipped with winch, screens, limb risers. Undercarriage is 60%, well maintained, clean cab, good heat/ac. Call for more info.

Ph: (888) 401-6367 x703

Item ID 100053. Austin x703

JOHN DEERE 750J

capacity!. Item ID 13421. Sam x702

BARKO

2011 John Deere 750J has 4200 original hours, enclosed cab with heat/air, strong winch. Undercarriage is around 80%. Working until sold.

Item ID 100015. Austin x703

JOHN DEERE 650H

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

2003 John Deere 650H has around 8000 frame hours, Undercarriage is around 60%, has full forestry package with winch. Dozer was never logged with until this past year.

Item ID 99876. Austin x703

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

JOHN DEERE 650G

90's model John Deere 650G Long Track Full forestry Dozer with winch. undercarriage is at about 80%. Call for more information

Item ID 99852. Austin x703

DYNAMIC CHIPPERS

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

PRECISION HUSKY CHIPPER

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

They put it to work, bought brand new in 2013 -66 inch -8 knife -Bottom discharge -Extra parts come with it (worth about $5,000) -Owner is done with project and so selling it -Machine is as good as new, everything works on it.

Item ID 100116. Joe x709

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Victory Ln. // PO Box 124 Adams Center, NY 13606

that Started it All!

Roughly it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported both sides. This machine 130 presses. hours computer Set 22ft. track 12,400 13434.

and

BANDIT GRINDER - CHIPPER

PRICE REDUCED $165,000

This is a 2017 Bandit 3680 875 hp CAT bought it new 10-17 it has 1000hrs+\- Still running it some. It has the new design 30 tooth mill and also had a new tail shaft and new anvil and gate. Also has a set of 3” baffled screens for it that only have about 30hrs on them. This is a strong tier 2 machine owner operated they are selling because they upgraded to a 1200hp machine, there is nothing wrong with this machine and

‘83

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

it is ready to work! If sold they can transport anywhere in Florida or to the FL state line to reduce transportation cost for the buyer. You won’t find a grinder in this good of shape anywhere. Item ID 72593. Austin x703

FELLER BUNCHERS

08' JD 843J ($49.5K)

4 Brand new tires, 28L’s -Enclosed CAB -Center section is tight, too -A/C - Heat works no problem -2yrs owner, getting out of logging, going a different route -Cutter is ready

to go to work, tight machine -Everything works as it should, really, really good cutter

Item ID 100122. Joe x709

13' JOHN DEERE 643K

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

2013 John Deere 643K with 6300 original hours, joystick control. Cab has heat/air, tires have good tread at 30.5 size. Cutter is in excellent shape, well maintained. Call for more info.

Ph: (888) 401-6367 x701

Item ID 100115. Austin x703

07' TIMBCO 445EXL

2007 Timbco 445 Exl with 8000 original hours, cutter

‘13

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

has new chains, and sprockets. UC is around 80%. Barsaw Head will rotate 45 degrees, but is plumbed for 360 degree rotation. Cutter is in great shape and is woods ready. Call for more info

‘93

180B

Item ID: 14077

Item ID 100104. Austin x703

Contact: Austin

Ph: (888) 401-6367 x703

15' TIGERCAT 724G

2015 Tigercat 724G has 8500 original hours, has the big hardwood head on it, cutter has been well maintained and is turn key ready. Call for more info.

Item ID 100101. Austin x703

96' CAT 312 TRACK BUNCHER

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1996’ Cat 312 Feller Buncher with Timbco head. Buncher has 8000 original hours with no oil leaks. Tracks are good, head was re-bearinged, with new bushings. Rails 95% on one side, 40% on the other. Brand new AC unit and has good heat. Complete service was just completed 20 hours ago. Also Comes with 24” bucket. Call for more info.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 100088. Austin x703

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

John Deere 4850

Barko

KMC 2500 Track

'05 JD 643H ($29.5K)

Hours Meter Reading: 8324

-John Deere bunching head

-Tires size: 28L-26 Tires -A/C

- heat both work good -Center section is tight -Pins & bushings are good -It has a new saw disk -Kept really, really well. Good cutter.

Item ID 100072. Joe x709

TIMBCO 425C

2003 Timbco 425C has around 10900 frame hours, new teeth for the head, 8.3 cummins motor, one side final drive has been replaced, the other side

one final drive is a little weak, still running fine but starting to show some wear. Overall buncher is in good shape. Call for more info.

Item ID 100028. Austin x703

CAT 563C

2016 Cat 563C Has right around 6400 frame hours Joystick control New style bunching head In great shape everything works like it should.

Item ID 99970. Austin x703

445B

98’ Timbco 445B auto leveling,

new undercarriage, has hot saw head, and new 8.3 cummins engine in it. Head is in good shape, no cracks in the disc, and new teeth.

Item ID 99934. Austin x703

Everything is tight and dry.

Item ID 99917. Austin x703

14' TIGERCAT 720E

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘93 Barko 180B

JOHN DEERE 753J

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

2014 John Deere 753j buncher well maintained. 10,826hrs great shape undercarriage at 50% Main boom and stick boom have been updated with strengthening plates 1,000hrs ago. New Stickboom cylinder. Heads is in good shape.

‘13 KMC 2500 Track

well built processor. Item ID 13820.

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

2014 Tigercat 720E has 10000 frame hours, and new reman motor with 150 hours on it, with receipts. Cutter is tight, dry, and a clean machine inside and out. Also has new style joysticks and new saw pump. Needs nothing to get in the woods.

Item ID 99916. Austin x703

JOHN DEERE 643K

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

2012 John Deere 643K with 6500 hours just had new cutting edge installed. This cutter has been garage kept half of its life and is very clean inside and out, meticulously maintained with absolutely no issues. Comes with brand new 43" wide tires for front axle, along with good 28L tires with original rims. Call for more pics and info.

capacity!. Item ID 13421. Sam x702

BARKO

Item ID 99905. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

The Tree that it All!

Since 1986, Lumbermens published monthly reaching sawmills, pallet makers, industrial woodworking worldwide.

PUBLISHER Woods

ADVERTISING SALES Morris (888) 401-6367

morris@lumbermens.co

MARKETING

John (888) 401-6367

j@lumbermens.co

DESIGN DIRECTOR

Donna Heninger

EQUIPMENT

Sam Wall austin@lumbermens.co

Roughly it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin S & W 125 Band Mill Caterpillar generator - Low hours computer Set 22ft. track 12,400 13434. CARRIAGES

2010

Carriages

Carriage carriage with turners, carriage drive, sawyers controls, cabinet for carriage knees, husk including 48" bottom saw and 36" top saw

JOHN DEERE 753J

2013 John Deere 753J

Feller Buncher with a FR21B Felling Head. It has 8500 hours, runs and starts good, resealed gear box, strong hydraulics and drive, new saw pump. Boom has tight pins and bushings, Bigfoot undercarriage will need to be replaced soon, and will also need a new saw disc soon. It has 24" single grouser pads. grab arms are in good working order. Heat, air conditioning, & lights all work.

Item ID 99902. Austin x703

JOHN DEEERE 643G

1996 model John Deere 643G feller buncher its a one owner machine, has good hydraulics, it starts, runs, and cuts as it should. Call for more info.

Item ID 99897. Austin x703

ac. Frame hours are right at 10,000.

Item ID 99879. Austin x703

JOHN DEERE 643K

2013 model John Deere 643K currently has 8600 hours on it, buncher is tight and dry, with no leaks or blow by. Averaging 30-40 loads a week. Call for more info.

Item ID 99866. Austin x703

BELL ULTRA T

1997 Bell Ultra T has new Deutz engine in it with 15 hours on it. Tracks and undercarriage are in excellent condition. Cab has AC and joystick control. Woods ready. Video available if interested

Item ID 99865. Austin x703

HYDRO AX 721E

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

JOHN DEERE 843J

2008 model John Deere 843J machine is tight, dry, and works perfect, running everyday, size 28L tires. Cab has heat/

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

2004 Hydro ax 721 E is in excellent condition, it has only had two owner/operators its entire life. It has a 8.3 cummins engine, and the machine itself has around 6000 original frame hours. New upgrades include a new windshield, new batteries,

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

and new blades and teeth on the mowing deck. There are no leaks, and all of the pins and bushings are very tight. Unit Includes a bunching head and mower deck. The tires are size 28L and are basically new. And it includes a set of chains for the front tires. Machine is really in excellent shape all around and is 100% ready to go to work.

Item ID 99826. Austin x703

CAT 573

2006 model which is the first year Hydro ax bought Cat so technically it is a Hydro ax cutter with Cat decals, but it has 8700 hours on it, and is in real good shape. Woods ready.

Item ID 59580. Austin x703

8 foot mower deck. All is work ready.

Item ID 98954. Austin x703

TIMBCO 425D

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

1995 Timbco 425D has around 10000 frame hours. Head is a quadco 22" hotsaw, 40 degree tilt, UC % is around 80. has new rails, rollers, and sprockets, Hardly any leaks around pump system, ac just recharged. working daily. Call for more pics and info.

Item ID 98053. Austin x703

CAT 563C

2016 Cat 563C wheeled buncher with 2010 original hours, size 28L tires, in excellent condition inside and out.

‘95 John Deere C6 Tree Farmer

Item ID 2594. Austin x703

Item ID: 13920

Contact: Austin

FORWARDERS

JOHN DEERE 848L

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

2015 model with 3600 hours in excellent condition. Call for more pictures and information.

Item ID 83128. Austin x703

Ph: (888) 401-6367 x703

HYDRO AX 411

411 Hydro ax comes with log forks, a morbark sheer, and a

off onto a conveyor. This is a very well built processor. Item ID 13820.

Ph: (888) 401-6367 x703

TIMBERJACK 610

2000 model 610 Timberjack forwarder with joystick control, 13000 frame hours. Cummins engine, brand new rubber. Has good AC/Heat. Loading logs daily.

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 100095. Austin x703

on injection pump. always started good. in good working order. 22in

1999

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Barko 160D - new engine with

FRANKLIN 132

1994 model Franklin 132 forwarder with 6500 original hours on it, has cummins engine, clean cab with new glass all around. 12' 8'' log bunk. Heat/air, and good 23.1 tires on it. Call for more info.

(23inch & 43s) Injector pump (Brand New) Turbo Injectors (Brand New) Ready for the Woods!

“Precision Under Pressure”

Item ID 100093. Austin x703

JOHN DEERE 1010D

2005 John Deere 1010/D

Has 14000 frame hours Dry machine, with good pumps. In the woods working now. It comes with two sets of tires

Item ID 100022. Austin x703

VALMET 644

2002 Valmet 644 forwarder in excellent condition it has a cummins engine with a powershift transmission, joystick controls, and extenda boom. Recent work includes: new center bearing redone, brand new rack, new main pump, new valve bank, new brake pump up by the motor,

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

and new clam cylinder. Has new 23.1 tires on the back. Overall very clean and in great shape.

Item ID 99837. Austin x703

VALMET 840.4

‘16 Halverson H140 Skidsteer (DEMO)

injection pump. Running gears have been gone through from one end to the other. Not a leak on this machine. Also had new fuel pump installed.

Item ID 79249. Austin x703

‘93

Barko 180B

Item ID: 14077

TIMBERKING 458

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

2009 Valmet 840.4 6 wheel forwarder. Sisu 6 cylinder diesel motor. 28L size front tires at 75%, 710/45X26.5 rear tires at 60%. fuel fired diesel heater. CRF8.1 Cranab loader, G36 Grapple with protec system. Recent work includes brand new hydro stats, along with new drive motor and new

Contact: Austin

Ph: (888) 401-6367 x703

2005 Timberking 458 forwarder with 17,750 frame hours, had new engine installed 1000 hours ago, new super grip grapple 1000 hours ago as well. Very well maintained and straight machine, working daily.

Item ID 171. Austin x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

capacity!. Item ID 13421. Sam x702

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

‘83 John Deere

(888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

VALMET 840.2 FORWARDER

2005 Valmet 8 wheel double bunk forwarder, around 18000 frame hours, has new trunnion, has new rear bogie brakes that were installed last spring. New loader mast put on a year ago, comes with 1 set of ice chains, and 1 set of bear paws, and 1 set of tracks. Tires are 600's rears are 80% fronts are 40% comes with extra hoses, and extra lights.

Item ID 9770. Austin x703

GRAPPLE SKIDDERS

07' JD 748G III ($49.5K)

Have videos available -Meter reads 1hr, because it was just replaced, but it showed those hours before install -Tires size: 30.5’s -Tires tread: 80% -Gears shift smoothly -Dual arch -A/C and heat both work -Winch and grapple work -Engine & transmission rebuilt by John Deere 1yr prior to owner buying it about a year ago. -Reason for selling: he mostly cuts small tracts and mostly by himself. Too big for what he does -Everything

‘05 Gehl CTL 70

Item ID:

Contact:

Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

works as it should.

Item ID 100127. Joe x709

83' TJ 380A ($29.5K)

New winch drive shaft -New injection pump -Bushings replaced in spring 2020

-Tight machine. Everything works as it should -Reason for selling: owner is a Tigercat fellow. Wanted to try CAT and compare. He’s sticking with Tigercat, this can go.

‘93 Barko 180B

Item ID 100123. Joe x709

‘16 Halverson H140 Skidsteer (DEMO)

-Tiny slop in the center section -New glass in the cab

Item ID: 14077

Contact: Austin

Item ID: JW-909632

Contact: J Williams

-Motor is from a 93’ dodge pick-up truck with low hours installed in summer 2019

Ph: (888) 401-6367 x701

-Owner ran it two seasons, then bought a bigger skidder in 2020 -New cylinders for the grapple, -4 speed clark powershift -Tires size: 24.5 x 32, -Owner will put a brand new tire on before sale -4 chains come with sale -2yrs owner -Owner went pretty much thru everything, machine is at work everyday right now. It's ready to go make $$$$ elsewhere.

‘13 KMC 2500 Track Skidder

Item ID 100126. Joe x709

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

13' CAT 545C ($64.5K)

Tires size: 35.5’s -A/C works

-It’s got new injectors, too -Center Section is good -Blade is fine -Enclosed cab

off onto a conveyor. This is a very well built processor. Item ID 13820.

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Ph: (888) 401-6367 x703

TJ 450 (FOR PARTS OR FIXING)

Engine is in good working conditions. Machine cranks up but doesn't move, it just idles. Grapple works, no winch, good tires tread still. Can be a fixer upper or used for parts

Item ID 100112. Joe x709

2009 CAT 545C ($48K)

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

Meter reads: 12000 +/-Center section has no slack -Brand new transmission in 2019. HOLT CAT in TX installed it -All bearings and selas replaced -All braces and supports replaced -Machine is good to go. -Everything works as it should -Owner is not into logging anymore

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 100109. Joe x709

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

98' TIMBERJACK 460C

Working daily. Call for more info.

Item ID 100098. Austin x703

CTR 950

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

1998 Timberjack 460C grapple and winch skidder, has under 500 hours on a new crate engine, machine starts, runs, and shifts great. Has new lexan glass, all cylinders have been recently repacked, tight center section, the oil cooler leaks a bit, and could be replaced but that is the only repair that it could use. Other than that it is woods ready. Call for more information. Item ID 100106. Austin x703

14' JOHN DEERE 748H

2014 model John Deere 748H with 13000 original hours, has the sweda axles, with 44'' tires. One owner/operator skidder, that has been well maintained. Call for more info.

Item ID 100099. Austin x703

‘13 KMC 2500 Track Skidder

15' CAT 545D

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

2015 Cat 545D grapple skidder with winch, and 44'' flotation tires, skidder has 4000 original hours, and all of the components work like they should, good center pins, no bad leaks, heat/ac works.

BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

CTR 950 Grapple and winch skidder has 5.9 cummins engine, john deere winch, two sets of diamond double chains. Rebuilt the grapple controls recently as well as new fuel pump. Skidder has been well kept and is ready for work.

Item ID 100097. Austin x703

06' JD 648G III ($37.5K)

Single arch -Winch doesn't have cable from lever to the winch -A/C works, heat good -Center pins have a little slack, not horrible -Tires size: 30.5 -Direct Drive machine -Owner is downgrading, down to 1 crew -3yrs owner -Good skidder, will go right to work

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Item ID 100077. Joe x709

Contact: Austin

Ph: (888) 401-6367 x703

TIMBERJACK 460

capacity!. Item ID 13421. Sam x702

BARKO

Timberjack 460 has 5,9 cummins, 3 speed trans, esco grapple, strong winch, dry skidder doesn't burn oil. Working daily, video available if interested.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp

Item ID 100049. Austin x703

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

ATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

2ND ANNUAL GREAT LAKES

GGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Schutte Hammermill Grinder

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina ww.midatlantic-logging-biomassexpo.com/

KENTUCKY WOOD EXPO

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL O Fri, Oct www.ohioforest.org

BANDMILLS

‘01 Benson 34’ End Dump

Item ID: 13818 Contact: Sam (888) 401-6367 Ext. 603

Mag 64-knive Source Grinder

Item ID: 14007

Contact: Austin

Ph: (888) 401-6367 x703

John Deere 640 Grapple Skidder

Item# 13848

Contact: Sam Ph: (888) 401-6367 x702

1996 Timbco T425B FB w/2008

Rotosaw Intermittent Saw Head.

Machine has 540 degree non continuous rotation on upper. 9900 hours. New Undercarriage. New glass in cab. Very good running condition. Rotosaw has 360 degree rotation. Cummins 6CT8.3 engine with 215 HP. Machine runs great. Working in select hardwood today.

Item ID 13548. Sam x702

1997 Timbco 820C Clam Bunk

Forwarder - “4000” original hours.

20.3 x 25 rubber at 70%. Hand sanded and painted, brand new

‘15 Cord King M44

Item ID: 13961

Contact: Austin Ph: (888) 401-6367 x703

computer and Scorpion controls, added speed control. 2 sets of tracks , all new Lexan. Located in Alberta, Canada. Customer will pay shipping to closest US entry point. Item ID 13532. Sam x702

1998 Timberline Stroke Delimber8400 hours. U/C at 60%. Will crank and run. Owner retired. Machine idle for past year. Item ID 13599.

Sam x702

1999 Timbco 820D Clam Bunk

Forwarder - 10,300 hours. New engine less than 500 hours ago. Can accept bunks, but none with machine. Owner has two sets of

tracks like new he will add for additional $20,000. Item ID 13494.

Sam x702

1999 Timbco TF-820D Forwarder11k hrs on machine, new Cummins engine at around 8k hrs and has fresh drive pump & imp. pump. 28L 26 tires some great, some decent. Machine is ready to work, but could use a little fixing here and there. the bucket is sloppy could stand to be pinned and bushed. No major issues!. Item ID 13212. Sam x702

2000 Timbco 415D w/2005 Fabtek

4-Roller Processor - 21,000 hours on meter. New JD 6 cylinder engine in 2011 has 7000 hours. U/C at 65%. Extensively rebuilt with new swing motor, new charge pump, new high speed saw motor, new main hydraulic pump, new oil cooler, all main cylinders repacked. Package includes extra final drive, extra computer screen, and extra

swing motor. Has new jet fit system. This machine is loaded... has pro-heat system for cold weather start. Has fire suppression system. All working! Hydraulic Oil just totally changed (100 new gallons) with new filters. Item ID 13598. Sam x702

2000 Timbco 425D w/33" Bar Saw Head. 40 degree tilt on head. 540 degree rotation on upper body. One year old Cummins 6CT8.3 engine. Resealed pumps. Rebuilt valve bank. 90% undercarriage. Can accept hot saw. Fire suppression system. Auxiliary oil cooler. Good running machine.

Item ID 13549. Sam x702

2000 Timbco 445D - Recent engine and pump last winter. New sprockets and rollers. 22” quadco hot saw. Owner retired. Located in Montana. Item ID 13790. Sam x702

2005 TimberPro 830TF Forwarder - 6580 hours. Very good condition.

Tracks for all bogies. 710/45-26 tires at 70%. Includes bolsters and back rest. Comes with 36” grapple with grapple saw option.

capacity!. Item ID 13421. Sam x702

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

20,000lb goose neck trailer. Item ID Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order.

13428 Victory Ln. // PO Box 124

Since published reaching pallet industrial worldwide.

ATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhostin

SOUTHWEST

Fri, 25 Hot www.arkloggers

2ND ANNUAL GREAT LAKES GGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina ww.midatlantic-logging-biomassexpo.com/

& HEADSAWS

Roughly it in

Firewood dealers can now compete with larger producers achieving greater profits than they are now making by using our automatic firewood bundler machine line. Those with waste wood product can now turn what they currently give away, throw away or sell at ridiculously low prices, into handsome profits!

WOOD-PACKAGING has come into its own.

KENTUCKY WOOD EXPO

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam DRIVES

with Innovative Clean-Burn Design

2010 Carriages Cardinal Carriage carriage with turners, carriage drive,

sawyers controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

The published Publishing, Columbia, reserved. submissions discretion be and space. Although been made to ensure accuracy of content submitted and writers, Exchange, associates, errors or

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

When

You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!

‘16 Halverson H140 Skidsteer (DEMO)

20,000lb goose neck trailer. Item ID

Item ID: JW-909632

‘93 Barko 180B

Item ID: 14077

Traditional Quality Combined With Todays Technology Call 800 752-0627

Contact: Austin

Make Sure To Ask For Our Free, Complete Saw Catalog

Ph: (888) 401-6367 x703

Contact: J Williams

Ph: (888) 401-6367 x701

We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw

‘05 Tigercat 230B

‘97

210E

• Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

Item# 13795

Item ID: 13911

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

Contact: Austin Ph: (888) 401-6367 x703

• Your Satisfaction - Completely Guaranteed.

Contact: Sam Ph: (888) 401-6367 x702

‘95 John Deere C6

B.H. Payne & Company, Inc.

‘13 KMC 2500 Track Skidder

P.O. Box 90608 East Point, GA 30364 404 761-8711

Item ID: 14078

Fax 404 761-5398

Contact: Austin

Ph: (888) 401-6367 x703

“Since 1890”

‘99 Hydro-Ax 511EX

2006 Logosol Planer - This is a 10” 4 sided planer that has removable side cutters that will take up to 12” lumber and includes a blower system. Item ID 13428. Sam x702

POLE & POST PEELERS

off onto a conveyor. This is a very well built processor. Item ID

E-mail: info@paynesaws.com

Item ID: 13799

Runs great. Has worked double shifts so it has higher hours at 13,500, but has been well maintained. New U/C last year. 24” grousers. All pumps rebuilt last year. Gull wing engine cover with hydraulic lift for easy maintenance. Rolly II in good condition and computer measures well. Owner retiring. Bought new for $540,000!.

Item ID 13362. Sam x702

2006 TimberPro 830 COMBI

PS8 Post Peeler - This peeler has been converted to electricity over hydraulic. Comes with a operators cab, electric boxes, conveyor and

knuckleboom, 30' boom, 75hp motor,

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Skidder - Very good running condition. Big Capacity Grapple! 9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders –grapple arch, steering; Replaced hydraulic hoses and lines where needed – fill pump, grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced center pins; Straightened and painted panels; Changed all fluids and filters; Re-insulated cab; Checked and fixed wiring as needed. Item

bogies adds $10,000. Item ID 13501.

2010 TimberPro 725B w/Rolly II Processor - Super Clean Machine.

Harvester/Forwarder - Just 5700 hours. Very good condition. Comes with grapple for loading forwarder and Log Max 7000 processing head for harvesting. 2 sets of tracks for bogies. Set up for quick change from harvester to grapple. One man operation. Log Max head has top saw and runs well. Compare to new machine at $650,000. Item ID 13439. Sam x702

PLANERS

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

edger diesel powered with a fuel efficient duezt 247hp motor. Item Ph: (888) 401-6367 x702

Value! PA. Item ID 12062. Sam x702

Rotobec continuous

Mud Tracks. Front blade. Hood

Since published reaching pallet industrial woodworking plants worldwide.

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomass­

MID-ATLANTIC BIOMASS EXPO

(888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange 1916 Columbia, 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

©2017 Woods Publishing

Northeastern Forest Products Equipment Expo

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

May 19-20 • Bangor, ME

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

AUGUST

Woodmen's Field Day

August 18-19 • Boonville, NY

IWF (International Woodworking Fair)

August 20-23 • Atlanta, GA

‘95 John Deere C6 Tree Farmer

Southern Forest Products Machinery & Equipment Expo

Item ID: 13920

‘13 KMC 2500 Track Skidder

August 23-25 • Nashville, TN

Contact: Austin

Ph: (888) 401-6367 x703

SEPTEMBER

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Great Lakes Logging & Heavy Equipment Expo

capacity!. Item ID 13421. Sam x702

BARKO

September 7-9 • Escanaba, MI

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Kentucky Wood Expo

September 15-16 • Lexington, KY

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Mid-South Forestry Equipment Show

September 22-23 • Starkville, MS

OCTOBER

Paul Bunyan Show

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

October 6-8 • Cambridge, OH

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

2004 Bandit Beast Model 4680 -

NY STATE WOODSMEN'S FIELD D AYS

Log Truck Collides with Train When Driver Distracted

BACKGROUND

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

On a spring morning in the Southeastern U.S., a log truck driver was starting to transport his second load of the day. The weather was not a contributing factor to the accident as conditions were clear and dry.

SOUTHWEST FOREST PRODUCTS EXPO

BANDMILLS & HEADSAWS

PERSONAL CHARACTERISTICS

ACCIDENT

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

The driver had only been on the job for 17 months; however, he did have previous truck driving experience. He was familiar with the route from the woods to the mill since the logging crew had been operating on this tract for some time.

72ND ANNUAL GREAT LAKES

The driver proceeded with caution upon approaching a set of unguarded railroad tracks that crossed the road. After crossing the tracks, the driver traveled about one mile before approaching a second set of unguarded tracks. The truck was traveling about 45 mph, which was the posted speed limit.

LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS

The driver began to become distracted as the glare from the sun started to impact his vision. At the same time his cell phone began to ring. The driver answered the phone call from his boss while using his hands-free device. However, because of the distractions, the driver failed to notice the flashing signal lights at the railroad crossing warning of an oncoming train.

PUBLISHER

Woods Publishing

As the driver began to cross the tracks, the locomotive collided with the cab, causing the train to derail. The locomotive was traveling at a low rate of speed, but the collision caused the truck to spill its load of logs, and it was pushed about 60 feet along the tracks.

ADVERTISING SALES

MID-ATLANTIC LOGGING & BIOMASS EXPO

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

The owner heard the collision over the phone. After several attempts to contact the driver, he was finally able to connect with him and learn more details about the precise location of the accident.

INJURY

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

KENTUCKY WOOD EXPO

MARKETING DIRECTOR

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

When the business owner arrived at the accident scene, emergency services personnel had already started transporting the injured truck driver and locomotive engineer to a hospital by ambulance. The truck cab was crushed, but the driver was protected by the heavy-duty headache rack, which prevented logs from penetrating the cab.

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

The driver was admitted to the hospital and placed in intensive care. He suff-ered four shattered ribs and a liver laceration. He was released from the hospital two days later to recover at home for eight weeks. Drug and alcohol screening was negative.

DESIGN DIRECTOR

UNSAFE ACTS/CONDITIONS

THE PAUL BUNYAN SHOW

Donna Heninger

• The driver failed to yield the right of way to an oncoming train by disregarding the flashing warning signal.

EQUIPMENT REPS

• The driver was operating a moving vehicle while distracted and not paying attention to his surroundings.

RECOMMENDATIONS

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

• Always be aware of your surroundings and avoid any distractions while driving.

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

• Use ‘Do Not Disturb’ mode or a similar safety feature on smartphones to eliminate the temptation to answer calls or texts while driving.

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

CARRIAGES & DRIVES

• Stop a safe distance away from the tracks at railroad crossings to ensure the tracks are clear of oncoming trains.

Austin Woods (888) 401-6367 ext. 703

2010 Cardinal HD Carriage

Notcher (Challenger machine built) Item ID: 100125

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Ford Picker Truck Item ID: 100027

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph:

‘95 John Deere C6

Item ID: 13920

Great Lakes Log

Log Max 7000 Item ID: 96628

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Case FLX437 Floater Picker Log Truck Item ID: 18710

‘05 Gehl CTL 70

Contact: SAM

Item ID: JW-986495

Email: Sam@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 702 (C) 615-596-4148 75”

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

Item ID: 41386

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

TimberPro TF830D Combo Machine Item ID: 1360

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

‘13 KMC 2500 Track Skidder

Precision Scragg Item ID: 3607

Contact: AUSTIN

Item ID: 14078

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Timbco 445EXL Hotsaw Feller Buncher Item ID: 47200

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

‘92 Timberjack 450C Item ID: 81886

LOGGING EQUIPMENT BANDIT

Contact: AUSTIN

Contact: Austin

Ph: (888) 401-6367 x703

Trailer/Serco 7000 Item ID: 100092

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

(excellent condition.). Item ID 13238. Chris x700

Warratah FS20 Item ID: 100118

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

Ford 9000/Serco 8500 Item ID: 100057

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Contact: AUSTIN

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Tigercat 822 Item ID: 85680

Contact: AUSTIN

Email: Austin@lumbermensco.com

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

John Deere 648G Item ID: 68404

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Timberjack 230E Cable Skidder Item ID: 70028

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

99’ Woodmizer LT 70 Item ID: 100129

Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Fulgham Chipper

Timberjack 460D Item ID: 91657

Contact: AUSTIN

CAT D5H LGP Item ID: 64808

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2009

‘16 Halverson H140 Skidsteer (DEMO)

ID: 83019

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Mack Truck with Hood Loader Item ID: 76831

Contact: SAM

Item ID: JW-909632

Email: Sam@lumbermensco.com

Franklin

Grapple

Item ID: 55955

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS

& GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Item ID: 54867

John Deere 1710D Forwarder Item ID: 94242

Contact: SAM Email: Sam@lumbermensco.com

‘05 Gehl CTL 70

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

CAT 140G Item ID: 93592

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078

Contact:

Ph:

off onto a conveyor. This is a very well built processor. Item ID 13820.

2005 John

Sam x702

2054 Track Loader Item ID: 82959

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

931-797-8029

Ph: (888) 401-6367 x703

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

‘95 John Deere C6 Tree

CAT D4C LGP Forestry Dozer Item ID: 99373

Item ID: 13920

Contact: SAM

Contact: Austin

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Ph: (888) 401-6367 x703

CAT D6M Dozer Item ID: 71062

Contact: SAM Email: Sam@lumbermensco.com

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

Prentice 384 Knuckleboom Loader Item ID: 36889

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple.

Contact: AUSTIN

2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702

Feller Buncher w/DS Ryan 28 Felling Head Item ID: 76226

BELL

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Farmer

2384 Prentice Knuckleboom Loader Item

Q80

Skidder

Deere

John Deere 648 G Grapple Skidder w/Winch

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching loggers, pallet makers, recyclers and industrial plants worldwide.

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701

DESIGN

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

6552

MID-ATLANTIC LOGGING & BIOMASS EXPO

TF 830C Item ID: 8077

Contact: SAM

STATE WO D AYS

Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

SAM

Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Esca

MID-ATLANTIC IOMASS Fri, 1 Selm www.midatlantic-logging-biomassexpo.com/

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916

Send address changes to: Lumberman's Exchange

Contact:

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted by and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

©2017 Woods Publishing

KENTUCKY WOOD EXPO

Contact:

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

615-596-4148

Contact: SAM

4677

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM

7407

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 12,400 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, sawyers controls, cabinet for carriage knees, husk 48" bottom saw and 36" top saw

Contact:

John

753J

John Deere 440C’s Package Deal Item ID: 100094

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

John Deere 750J Item ID: 100015

Contact: AUSTIN

Email: Austin@lumbermensco.com

‘05

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

79’ Timberjack 225D Item ID: 100087

‘16 Halverson H140 Skidsteer (DEMO)

Contact: AUSTIN

Item ID: JW-909632

Email: Austin@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

97’ John Deere 640G Item ID: 100070

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact:

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

John Deere 650H Item ID: 99876

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

07’ Timbco 445EXL Item ID: 100104

Contact: AUSTIN

LOGGING EQUIPMENT BANDIT

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Item ID: 14077

Contact: Austin

97’ Timberjack 240C Item ID: 100076

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

John Deere 650G Item ID: 99852

Contact: AUSTIN

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in

15’ Tigercat 724G Item ID: 100101

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs

BELL

Item ID: 99970

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Gehl CTL 70

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

STATE WO AYS

Fri, 18 August August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 753J Item ID: 99917

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

& HEADSAWS

MID-ATLANTIC LOGGING & BIOMASS EXPO

John Deeere 643G Item ID: 99897

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Hydro AX 721E Item ID: 99826

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

931-797-8029

14’ Tigercat 720E Item ID: 99916

Contact: AUSTIN

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com 72ND ANNUAL GREAT LAKES

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

7 Sept - Sat, 9 Sept Esca

John Deere 843J Item ID: 99879

Contact: AUSTIN

15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CAT 573 Item ID: 59580

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 643K Item ID: 99905

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Deere 643K Item ID: 99866

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 12,400 13434.

John Deere 848L Item ID: 83128

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage

Timberjack 610 Item ID: 100095

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph:

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!.

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

07’ JD 748G III

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916

Fri, 18 August Boonville, www.starwebhostin net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

& HEADSAWS

MID-ATLANTIC

John Deere 648E Item ID: 99894

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Timberjack 450C Item ID: 99889

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Timberjack 240 Item ID: 99828

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Timberjack 240C Grapple w/Winch Item ID: 99861

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production conveyers airbags, Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with hours computer Set 22ft. track 13434. Sam x702

Timberjack 380A Item ID: 79616

CARRIAGES & DRIVES

Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, carriage, sawyers controls, cabinet drives for carriage knees, husk including 48" bottom 36" top saw

08 Rottne H14 Item ID: 100107

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

STATE YS

Fri, 18 August Boonville, www.starwebhostin net/woodsmen/ SOUTHWEST EXPO

BANDMILLS & HEADSAWS

Item ID: 8019

Contact: AUSTIN

Email: Austin@lumbermensco.com

The Tree that Started it All!

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching pallet industrial worldwide.

Item ID: 100128

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Cooper

Item ID: 100113

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

Contact: JOE

Email: Joe@lumbermensco.com

Woodmizer Smart Log Processing

Item ID: 100089

Contact: AUSTIN

Email:

72ND ANNUAL GREAT LAKES

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

& HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Esca

MID-ATLANTIC IOMASS

Morbark PS8 Post Peeler Item ID: 100055

ADVERTISING SALES

Contact: AUSTIN

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Email: Austin@lumbermensco.com

MARKETING DIRECTOR

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

John Williams (888) 401-6367 ext. 701 (888) 401-6367 ext. 702 sam@lumbermens.co

Pendu Cut Off Saw Item ID: 10632

Contact: AUSTIN

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916

morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange

Item ID: 84282

Contact: AUSTIN

P.O. Box 1916 Columbia, TN 38402

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

4 Head Trim Saw Item ID: 1559

Contact: AUSTIN

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. submissions discretion be and been content submitted and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

©2017 Woods Publishing

MID-ATLANTIC LOGGING & BIOMASS EXPO

Fri, 15 S Selma www.midatlantic-logging-biomassexpo.com/

Edmiston Complete Item ID: 99883

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

KENTUCKY WOOD EXPO

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/

Item ID: 42175

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Whole

Tree

Chipper

Item ID: 41602

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Portable Sawmill Item ID: 45665

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

66”

Precision Chipper Item ID: 4524

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

4” Morgan Resaw Item ID: 4849

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, conveyers that go with airbags, it includes Mcdonough pressure Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar hours computer Set 22ft. track 12,400 13434.

Sam x702

Morbark Stac Trac Item ID: 64060

CARRIAGES & DRIVES

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, sawyers controls, cabinet drives for carriage knees, husk including 48" 36" top saw

Baker 2 Head Resaw Item ID: 6828

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Meadows #2 Item ID: 9960

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15’ Salsco Slab Chipper SC-6

Scragg Mill

Precision Husky Chipper Item ID: 100115

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Bandit Grinder - Chipper Item ID: 72593

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Tajfun

Joy Item ID: 7120

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2008 Cat

Steer 289C Item ID: 60484

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367 x703

Morbark

Item ID: 16264

Forestry

Item ID: 46375

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CAT

Item ID: 39840

Contact: SAM

Email: Sam@lumbermensco.com

‘05 Gehl CTL 70

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Item ID: JW-986495

Contact: J Williams

Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Morbark

Best Value Portable Log Splitter

Item ID: 75143

‘16 Halverson H140 Skidsteer (DEMO)

Dynamic Horizontal Grinder Item ID: 5011

Contact: AUSTIN

Item ID: JW-909632

Email: Austin@lumbermensco.com

Item ID: 14077

Contact: Austin

Tajfun 400 Joy Item ID: 99312

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: J Williams

Ph: (888) 401-6367 x701

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Mounted Horizontal Grinder

Item ID: 373

Contact: AUSTIN

2008 Cat

‘95 John Deere C6 Tree Farmer

Steer 289C Item ID: 73486

Item ID: 13920

Contact: AUSTIN

Contact: Austin

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

off onto a conveyor. This is a very well built processor. Item ID 13820.

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

H240 John Deere Tractor Item ID: 4808

Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

CAT 232D Skid Loader Item ID: 39708

Ford Bucket / Boom Truck Item ID: 80919

Contact: AUSTIN

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID

John

85D Item ID: 48169

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Horizontal Grinder Item ID: 96128

2010 Shop Built Wood Processor

Contact: SAM

Email: Sam@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: SAM

LOGGING EQUIPMENT BANDIT

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

John Deere 700J Dozer Item ID: 54715

Contact: SAM

Email: Sam@lumbermensco.com

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

CAT 318CL

Item ID: 97884

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

John Deere 700J LGP Item ID: 4747

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

480 Plus

Skid

Skid

30/60 Chipper

Deere

2014 Morbark M20R

Track Chipper

2018 Diamond Z Track

527 Grapple Dozer

Vermeer HG6000

6036 Chipper

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘93 Barko 180B

20,000lb goose neck trailer. Item ID

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

Value! PA. Item ID 12062. Sam x702

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

1116

Columbia, Tennessee 38401