Lumbermens June 2024 Issue

MODEL 40-C

Only Full Size Processor with Vertical Saw Motion – Eliminates Rocking & Frame Stress.

37 HPWS WOOD SPLITTER

Tree Services and Large Commercial Operations will appreciate the benefits of the Big Engine and Single Stage Pump to maintain production speeds with tougher splits!

BLOCKMASTER CUT-OFF SAW turns your splitter into a 2 piece processor! Increase production, spend less time cutting and lifting without breaking the bank!

FIREWOOD TUMBLERS from Built-Rite increases your customer satisfaction with ease! Efficiently designed to remove bark and dirt with options to accommodate your operations set up.

Sam x702

Firewood Processor - This is

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production capacity!. Item ID 13421. Sam x702

grapple, 5,000 original hours. (excellent condition.). Item ID on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

Donna Heninger

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams (888) 401-6367 x701

‘05 Gehl CTL 70

Item ID: JW-986495

‘83 John Deere 4850

Item ID:

Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID

published reaching pallet industrial worldwide.

Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertisers. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every

JW-909632

INTERNATIONAL CABLE SKIDDER

It’ll come with brand new tire chains on it, Everything still works as it should, Gears shift smooth, engine has no blow-by’s, No leaks, been well maintained, Starts right up and goes to work, He’s an old man, but could have videos available for those that can’t go look at it. One owner only, and he’s retiring. A few of the good ones left out there, Delivery available as well. Buyer pays for trucking, About 200mi east of Cincinnati OH

TIMBERJACK 208

208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.

Item ID 5320. Austin x703

JOHN DEERE 540D

working daily.

Contact: J Williams Ph: (888) 401-6367 x701

Item ID 5249. Austin x703

JOHN DEERE 440C

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID 5568. Joe x709

John Deere 540D cable. Skidder has new transmission, new hydraulic pump, and all of the cylinders were recently repacked. Has 23.1 tires all around and comes with new set of bear claw chains. This Skidder has been a dependable machine, and is currently in the woods

‘05 Gehl CTL 70

‘83 John Deere

4850

Item ID: 14073

Contact: Austin Ph: (888) 401-6367 x703

USes 10”, 12“ and 14” Blades to MAKE UP TO 8 RIPS AT once, LAser line projector, 22-125 FPM POWER FEED CONVEYOR, UPPER AND LOWER ANTI-KICKBACK FINGERS, 40HP SPINDLE MOToR, 2 HP CONVEYOR MOTOR, INFEED TABLE, OUTFEED TABLE, DIGITAL HEIGHT ADJUSTMENT, 6” DUST PORT, BLADE ACCESS DOOR

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS &

Item ID: Contact: Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

Not available online call: 360.243.5438

Ships from Bellingham, Wa 98229

$26,999

GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS 2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

John Deere 440C for sale, Skidder has a brand new motor in it, along with new clutch, new pressure plate, and new radiator, and rebuilt steering box. Winch was recently rebuilt as well. Skidder is tight and dry, and will come with a full set of ice chains. Call/email for more information.

transmission were rebuilt in 2021 with paperwork showing the work. Winch transfer case was also rebuilt shortly after. Pins and bushings are all tight, and is woods ready. Call/Email for more information.

‘13 KMC 2500 Track Skidder

Item ID 5242. Austin x703

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

90′ TIMBERJACK 240A

1990 Timberjack 240A cable Skidder that’s working daily. Has a 5.9 cummins engine. Both the engine and

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor

Item ID 5082. Austin x703

Contact: Austin Ph: (888) 401-6367 x703 LOGGING

‘95 John Deere C6 Tree Farmer

1996 TIMBERJACK 380C

Item ID: 13920

1996 Timberjack 380C 5.9 Cummins, 4 speed Clark Transmission 4 forward, 4 reverse, chains all around, new cable, new steering pins, have new center pins in box current pins are fine. Minor leaks, good running machine.

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 4825. Austin x703

good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

02′ JOHN DEERE 640G2

2002 John Deere 640G2 Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the transmission was rebuilt around the same time. Has all new bearings in the front end, as well as a new seat, new gauges, new heater, new glass, and new lights. Has 23.1’s on it with brand new chains on the front. On a job now. Call for more info.

“Precision Under Pressure”

Item ID 4710. Austin x703

86′ TIMBERJACK 230A

Motor rebuilt about 10 hrs ago, Same with brakes and new clutch / pressure plate (10hrs ago), This is in good conditions, NOT old junk. It’s good to go to work, Owner for 10+yrs, and used for jobs here and there, been the family skidder, Can take videos of it if you can’t go look at it, Can help trucking it anywhere in the US, About 80mi south of Baltimore, MD

Item ID 3605. Joe x709

FRANKLIN 170 SKIDDER

Detroit 453 engine, Powershift, 4 speed, Winch works well,

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Tires size: 23.1, Center section good, Runs and operates as it should

Item ID 3517. Joe x709

98′ JOHN DEERE 640E

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

1998 John Deere 640E cable skidder with 10000 original hours, this skidder was bought directly from the original owner/operator. Everything works like it should. Call for more info.

Item ID 2701. Austin x703

98′ JOHN DEERE 640G

98ʹ Model John Deere 640G

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

with 10000 original hours, very straight skidder that was bought from the original owner/operator, everything works like it should. Call for more info.

‘93 Barko 180B

Item ID 2694. Austin x703

Item ID: 14077

‘05 Gehl

CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Contact: Austin Ph: (888) 401-6367 x703

JOHN DEERE 440C’S PACKAGE DEAL

Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily. The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

Item ID 1966. Austin x703

‘95 John Deere C6

1983 JOHN DEERE 640C John Deere 640C grapple skidder, has rebuilt transmission less than 200 hours ago, motor is strong with no blow by. Tight and has been well maintained. Call/Email for more information.

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

Item ID 5582. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny

FMC 210

FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours. Skidder was refurbished in 1089 used in a handful of logging jobs in the early 90’s followed by light service in shot in 2018. Call/ Email for more information.

“Precision Under Pressure”

Call for more information.

Item ID 5419. Austin x703

Email info@empirehyd.com

06′ JOHN DEERE 335 LOG LOADER

Item ID 5526. Austin x703

CAT 225LC EXCAVATOR

Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples.

Motor has brand new pump. Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him to sell it, Delivery available as well. Buyer pays for trucking, About 70mi west of Orlando FL

Item ID 5403. Joe x709

TAJFUN EQUIPMENT

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644.

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery makes high quality equipment. Call us for more information and a competitive quote today!

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Item ID 5368. Austin x703

Contact: J Williams Ph: (888) 401-6367 x701

TIMBERJACK 1010

Timberjack 1010 double bunk forwarder, machine has around 15000 frame hours, and has had a lot of recent work done to it. That work includes: New Reman

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals in driveline. It will come with a set of eco tracks for the back, and set of wheel track for the front which are brand new. This is a straight machine that is not bent or busted up. It has had the same owner/operator since it had 6000 original hours on it. Owner is only selling to retire. Call/Email for more information.

Item ID 5358. Austin x703

2022 TIGERCAT 620H

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888)

2022 Model Tigercat 620H grapple skidder with 660 original hours, has bogie grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the grill. Skidder is in excellent shape. Call/Email for more information.

Item ID 5334. Austin x703

well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous on injection pump. always started good. in good working order. 22in

- new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

Sam x702

1999 Barko 160D

TIMBERJACK 208

208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.

“Precision Under Pressure”

has been a one owner/one operator unit since new and is in excellent condition. Call/ Email for more information.

Email info@empirehyd.com

Item ID 5227. Austin x703

TIMBERJACK 1270

Item ID 5320. Austin x703

CAT 538

2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703

TIMBCO 445EXL

Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced. Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703

2003 Timberjack 1270 Processor, machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine. Recent work includes a new ECU, new injectors, new fuel pump, new fuel lines, new wiring harness, new chip, new rear window, all new head cylinders, and pins/bushings, new encoders, and new seal kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

bucksaw. Works everyday, has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight and good loader. Only thing it does need is brakes.

Item ID 5085. Austin x703

‘16 Halverson H140 Skidsteer (DEMO)

LIEBHERR A312 WITH RYANS HEAD

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

1998 Model Liebher A312 mobile wheeled excavator with 9300 hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new lights, and back up camera. The Ryans head has low hours as well.

Item ID 4979. Austin x703

13′ BARKO 595ML MAGNUM

18′ JOHN DEERE 753J

2018 John Deere 753J with 6000 original hours. Ready to work, only selling to downsize. Has good undercarriage, and hotsaw head. Call/Email for more information.

‘93 Barko 180B

Item ID: 14077

Item ID 4968. Austin x703

Contact: Austin Ph: (888) 401-6367 x703

BELL SUPER T CUTTER

Bell Super T 3 wheel machine, has the deutz air cooled engine, with a 30” dangle head. Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L and will come with chains as well. Overall in good condition, and ready to work. Call/Email for more information.

Item ID 4952. Austin x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID 5199. Austin x703

2016 TAJFUN 400 JOY

2016 Tajfun 400 Joy firewood processor, unit includes log lift, and outfeed conveyer. Machine

PRENTICE 210B

210B Prentice Knuckleboom, comes with reversible csi

‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of the pumps rebuilt. Good, solid loader everything on it works as it should. Call/Email for more information.

Item ID 4974. Austin x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

CAT D5H TSK

Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work. Call/Email for more information.

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 4939. Austin x703

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new

TImberwolf Pro-HD Series Firewood Processors

643J

2007 643J cutter with 12,700 hrs, thinning saw head, 28LX26 tires, new starter,batteries, alt, gear box rebuilt, motor runs great uses no oil, does have a Hydraulic leak or 2, needs a bushing in one of cylinder arms, also comes with a 843J parts machine, has a tpost saw head,motor and Hydraulics are good 30k for both Item ID 4907. Austin x703

“Precision Under Pressure”

Email info@empirehyd.com

skidder is tight, and has a new engine in it with less than 400 hours on it. New 28L tires, Everything on the machine works like it should. Call for more info.

Item ID 4699. Austin x703

14′ JOHN DEERE 748H

is in great shape. Call for more information

Item ID 2593. Austin x703

TIMBCO 425D

‘16 Halverson H140 Skidsteer (DEMO)

04′ TIGERCAT 620

2004 Tigercat 620 Tigercat Grapple skidder has brand new engine in it, with less than 10 hours on it, and comes with a year warranty. Machine itself is pretty tight, speed control valve is new, main pumps are fairly new as well. Has heat/Ac, every function on the skidder works. Call for more info.

Item ID 4705 . Austin x703

2014 John Deere 748H model with 15000 frame hours, everything works like it should. Recently had new pins and bushings, and new motor installed just over a year ago. Equipped with sweda axles. Call for more info.

Item ID 2707. Austin x703

2016 HYPRO 755HB PROCESSOR

Item ID: JW-909632

Timbco 425D – Year 2001 –Quadco 20 360 degree head – 8.3 Cummins – Hours 7000 / 300 hours on caterpillar undercarriage – new planetary spindle. bearings and one seals in both sides.

Contact: J Williams Ph: (888) 401-6367 x701

Item ID 1429. Austin x703

725B TIMBERPRO

Well Maintained machine, tight and dry work ready with a Rolly II head. make an offer! Call for more pictures.

Item ID 1398. Austin x703

’92 TIMBERJACK 450C

TIGERCAT 822

Item ID 1130. Austin x703

460 TIMBERJACK

‘93 Barko 180B

New Motor, new center pins, and Hyd Pump Cummins = 100hours on the new parts , Tires are at 60%, comes with a spare tire. Text or email for more pictures Item ID 1124.

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

Marcus (660) 833-9061

1979 TIMBERJACK 230 CABLE SKIDDER

1979 Timberjack 230 Cable Skidder. Starts and runs perfect. Excellet condition, Excellent tires. Eaton Winch, Straight Blade. Call for more pictures. Item ID 1072. Kyle (807) 631-4081

John Deere C6 Tree Farmer

Item

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2009 JOHN DEERE 548G3

2009 John Deere 548G3 with

Tractor is a 1985 Versatile 276 tractor that has a flex plate between the engine and pumps, equipped with skid plate under the engine, and some new lights. Engine is a 140HP cummins, and has 3200 hours on it. The Hypro

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

10K frame hours – single arch –power-shift trans – tire size 28Ls – Tire tread: 20% front, 70% back – 5.9 cummins – Winch works –center section is tight – no major slack, dry machine, no leaks Item ID 1369. Robert (606) 875-4783

LOG LOADER

EXCAVATOR 225 LC

1986 Caterpillar excavator with a 3208 engine 5000 hours, total hours is 19000, Grapple, heals, bucket. Item ID 1067. Mose (208) 290-1888

off onto a conveyor. This is a very well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

with

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

brand new Duetz engine. Lever control, 33” bar, pump and tranny

1999 Barko 160D - new engine

PRENTICE 384

KNUCKLEBOOM LOADER

“Precision Under Pressure”

2002 prentice 384 Knuckleboom. Saw not included. Mounted on ’89 S 2500 International truck. Knuckleboom carrier/trailer also available.

Item ID 978. Austin x703

TIMBERJACK 380C GRAPPLE SKIDDER

1994 timberjack 380C 5.9 Cummins, 12 valve, 4 speed Clark transmission 4 forward 4 reverse, external tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls. Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures!

Item ID 863. Sam x702

JOHN DEERE 648D

new main drive shaft, motor rebuilt 200 or so hours ago, rebuilt fuel injector, hydraulic rebuilt, grapple rebuilt, w/ winch single arch tight machine

60% rear 40% front 28l’s

Item ID 547. Sam x702

JOHN DEERE 550G CRAWLER DOZER

New head gasket, Both final drives replaced, U/C tread: Approx. 75%, 20 inch pads, Direct drive, Pedal steer, Winch works well, it’s the JD 4000 series, Everything works as it should, This is his back-up dozer, why he’s selling. Doesn’t need it much anymore, Delivery available as well. Buyer pays for trucking, About 50mi south of Cincinnati OH Item ID 5388. Joe x709

16′ JD 700K

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

6 Way blade, Fully Enclosed cab, Forestry Package with winch, Wide pads, A/C – heat work, Owner has had it sine purchase. Now done with his project. Got himself something else, smaller, All controls work as they should, These go for $170$175K anywhere you look (for the year), and without a winch. This one has everything. Have a reliable trucker available. Buyer pays for trucking, About 150mi

south of Louisville, KY

Item ID 4343. Joe x709

06′ JD 700J LGP

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker available. Buyer pays for trucking, About 80mi south of Louisville, KY Item ID 3787. Joe x709

12′ JD 550K LGP

best of our knowledge and what owners tell us Item ID 3753. Joe x709

JD 550G LT

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Rotary Dryers

Sand Dryers Grain Dryers

Lumber Kilns

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

Rollers sprockets, chain and pads all re-done about 75hrs ago, Just had a John Deere 4000hrs service, All fluids an upgrades are up to date, No issues, very clean, no leaksI’d say machine is mint, Tracks are 24 inches with a 10’2” wide blade, Brand new U/C, 95%, Forestry package with winch, Enclosed cab, A/C and heat works and everything else, Owner is going with a bigger dozer, Ready to go to work, really solid dozer! Information provided is to the

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Manufacturing a full line of biomass fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels. Large or small scale, project management is eased with the impressively short installation time required with prefabricated modular components. with

Sam x702

LOGGING EQUIPMENT BANDIT

Mid 90’s model, Original hours, Forestry package with a winch. It pulls good, UC tread: about 70%, Nothing wrong whatsoever with dozer, Been well kept and used sporadically by him and his son, little jobs here and there, They’re buying a skidder with the money they get from this, why are they selling it, Have a reliable trucker available. Buyer pays for trucking, In KY, about 90mi. north of Nashville TN Item ID 3686. Joe x709

‘95 John Deere C6 Tree Farmer

14′ JD 650K LGP

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

29 inch pads, All bushings are tight, Dry, no leaks, Pre def emission delete engine turned up 20hp, Forestry package, Winch on it only been used about 600hrs, 10 foot 4 inch blade, Owner is retiring, Can help trucking it anywhere in the US, In the Fresno, OH area Item ID 3574. Joe x709

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Tough Meets QUALITY

CAT D6K2

2015 model in excellent condition, currently has 1750 hours, has enclosed cab with heat and air, undercarriage is around 75%, working daily. Call for more info

“Precision Under Pressure”

Item ID 1488. Austin x703

92′ CAT D5H

Item ID 4678. Joe x709

04′ JD 450H

Wide tracks, limb raisers, AC/ Heat, all controls work, Dozer is in really MINT conditions, One original owner, used for local jobs, not a major operation, He’s now 70yrs old and he’s willing to sell. He’s using it for one more week or so to finish a little job he has left, Have a reliable trucker available. Buyer pays for trucking, About 40mi south of Nashville, TN

Item ID 4327. Joe x709

New hydraulic pump, New transmission pump, New batteries, U/C is at about 60% tread, New front idler & track adjuster, Runs well, no issues, Direct drive, Been serviced regularly, all the paperwork avail., Owner is done with the project, letting it go, Have a reliable trucker available. Buyer pays for trucking, Better pictures avail. upon request, About 100mi south of Columbus, OH

Item ID 3873. Joe x709

02′ CASE 650H

03′ JOHN DEERE 648G III SKIDDER

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

90′ JD 550G

He has all of the side cab screens and the rock guards, Winch is strong,

4BT Cummins engine, Wide tracks, Open ROPS, Undercarriage tread: 80%, 2 owners only. Current owner owned it for 2yrs. Owner is retiring and doesn’t make much use of it, Every control works. All works and operates as it should, Videos available for serious inquiries, Can help trucking it anywhere in the US, About 60mi south of Kansas City, MO Item ID 3511. Joe x709

Hours Meter Reading: 13000, Tires size: 28L 26, Axes 1400, A/C works, heat good, Winch works fine, Direct Drive machine, Transmission was re-built at 10000 hours by current owner, Engine re-done by previous owner, about 4yrs ago, Owner bought a smaller, a bit newer skidder, Delivery available as well. Buyer pays for trucking, About 90mi west of Birmingham AL, Information provided is to the best of our knowledge and what owners tell us

Item ID 5647. Joe x709

’95 JOHN DEERE 548G II SKIDDER

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

was at work every day until last week, now at shop for pins, Diff. lock works, Tires size: 28L’s (Primex), Tires tread: 80% all around, Turn cylinders are re-packed, Everything works as it should, 1yr owner. Reason for selling he has another skidder bought, needs $$$ back in his pocket, Delivery available as well. Buyer pays for trucking, Closest city is Jefferson MO, 80mi south of it

Item ID 5605. Joe x709

TIMBER JACK 450B GRAPPLE SKIDDER

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

‘05

Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

New reman motor put in 4-5mo. ago (all receipts available). Work done by Schaefer Enterprises in Wolf Lake, IL, Skidder will be ready for delivery on/around Nov. 16, because bottom center pins are currently being redone, Almost all new U-joints thru the drive line, Skidder

Contact: Austin Ph: (888) 401-6367 x703

LUMBERMEN’S Equipment Digest PO Box 1146

Columbia, TN 38402-1146

1-800-477-7606 Fax (931) 388-3564 www.lumbermenonline.com

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Cummins engine strong, no issues, It’s got a winch, works well, Tires tread: 60%, Powershift, Everything work and operates as it should, All controls work, Owner has had it for many years, he’s old and retiring, why selling, Delivery available as well. Buyer pays for trucking, About 60mi north of Atlanta, GA

capacity!. Item ID 13421. Sam x702 BARKO

Item ID 5452. Joe x709

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

on

machine, in

Item ID 13937. Austin x703

MD.

Liebherr A924C Log Handler Rubber Tired Log Loader. 13,000 hours. 40’ Reach with two section boom. 60” Log Grapple with continuous rotation. Fixed Cab Riser with cab guard protection. Front push blade. Tight and dry. Cleaned, Serviced, and Checked out for service. Can pull loaded trailer. 4-Wheel drive and steering.

Komatsu WA200 Loader

Owner, low hours! Item ID: 14010 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13936

Contact: Austin Ph: (888) 401-6367 x703

2011 Liebherr A924 Rubber Tired Log Handler. Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned, serviced and inspected. Tight and dry and ready for work. Located in Baltimore, MD. Item ID 13478. Sam x702

LINK-BELT

4000 hours. Torque convertor transmission. 14 hole wheels. Tires are 30.5’s at 55% and one at 80%. Center has very little slack. This skidder has been a back up skidder for the several years. Skidder has 12000 hours. Item ID 13805. Sam x702

boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower. Item ID 12443. Sam x702

1997 Morbark Model 2400 Chipper - Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID 13429. Sam x702

1999 Morbark 1400 Tub GrinderLoader w/Cab; 4200 hours; Very good condition. Located in PA.

1997 Linkbelt 3400 has rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage. 5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber. Item ID 12992. Sam x702

Timberjack 520 - Very hard to come by! 653 Detroit. Runs Great!.

MORBARK

1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle

Located in Baltimore,

Item ID 13477. Sam x702

Bandit Introduces HM6420 Hammermill Horizontal Grinder

Bandit Industries has introduced a new hammermill horizontal grinder, the HM6420.

This highly productive 40-inch capacity grinder is designed and manufactured to be an alternative grinding solution for applications that may encounter contaminants.

The Bandit HM6420 is powered by a Caterpillar C32 1,200 hp engine for optimal performance and productivity.

The heart of the Bandit HM6420 is a 50inch diameter by 66-inch wide hammermill. The heavy-duty mill features a 1.75-inch drum skin custom formed from rolled plate. The mill is supported by a 7-inch main shaft constructed of alloy steel that has been

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

(Continued on page 21)

‘05 Gehl

CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701 ‘83 John Deere 4850

Item ID:

Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

BANDSAW BLADES

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

capacity!. Item ID 13421. Sam x702

knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702 1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Sam x702

Bandit Introduces/....

(Continued from page 20)

ultrasonic tested.

The Tree that Started it All!

** CALENDAR**

NY STATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

impact event is detected, the grinder will idle down, open the gate, disengage the clutch, and reverse the feed.

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

Each pocket within the mill is manufactured from high strength A-514 steel. These combinations create a structural sound mill for added durability and integrity.

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

The mill is equipped with 20 carbide infused hammer inserts built to withstand the toughest material. Each holder is securely attached to the mill via a patent pending quick-change pocket system. Each holder recesses into the mill pocket, increasing durability. A top plate covers the pocket and is secured by six hex bolts. The hammer insert is attached to each holder utilizing two bolts. With this set-up, the mill hardware is easily and quickly replaced.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

Donna Heninger

EQUIPMENT REPS

‘06 Brewco B1600 Resaw

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Item ID: 13862

Contact: Sam Ph: (888) 401-6367 x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

POSTMASTER

MID-ATLANTIC LOGGING & BIOMASS EXPO

& BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/ KENTUCKY

Standard wireless remote controls regulate all grinding and tracking functions and feature an LCD screen that will display engine coolant temperature, engine oil pressure, engine load percentage, engine RPM, and battery voltage. For more information visit www. banditchippers.com.

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This machine

Item ID: 14031

Contact: Austin Ph: (888) 401-6367 x703

A heavy-duty, slat-style infeed conveyor is directly driven, generating over 18,000 pounds of pulling power. The large diameter feed wheel is also directly driven and provides an additional 17,000 pounds of pulling power and 8,650-17,300 pounds of down force when hydraulic pressure is applied. These combinations allow the HM6420 to grind massive quantities of material efficiently and effectively at one time.

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

John Deere 548G2

A proportional feed system is standard and regulates the feed system from 82-132 feet per minute. The HM6420 has one of the fastest feed rates on the market, allowing it to quickly process material. The proportional feed system allows operators to adjust feed based on the material being processed, ensuring maximum output and grinder efficiency, all while achieving a higher quality end product.

Item ID: 14042

Contact: Austin Ph: (888) 401-6367 x703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

- 3410 hours. $32,000 in recent upgrades and repairs. Fecon BH250 Mulching Head. Item ID 13502. Sam x702

Item ID: 13838

Contact: Sam (888) 401-6367 Ext. 603

2011 Tigercat 620D - This is a low hour skidder with only 5500 hours on a cummins engine and a fire suppression system. Comes mounted on 35.5 tires at 50% back and 40% front and good chains on all 4 tires. Has the bigger 630 axles and no winch. Center pins are tight and extra fuel tank. Item ID 13929. Sam x702

Item ID 13408. Sam x702

An impact detection system is standard and is designed to limit damage if a contaminant is struck inside the grinding chamber. Once an

©2017 Woods Publishing

2014 Tigercat 630D Grapple Skidder - Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702

2015 Tigercat 234B Loader - Model 234B. Only 300 hours on this

roatation on the grapple w/ a 30’ reach on the boom. Joystick

2006 Tigercat 630C Grapple Skidder - Very good running

Industry Veteran Supplier Passes Away

The pallet industry recently lost a dedicated supplier and industry pioneer with the passing of Alexander Murray "Sandy" Campbell Jr. He died on March 27, 2024, at the age of 75. He was preceded in death by his parents, Alexander M. and Sue Harris Campbell; and his sister, Jerry Campbell Jurek. He is survived by his wife of 39 years, Mary Elizabeth; his son, Whitney Alexander; and his sister, Leslie Campbell Graves.

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

For decades, Sandy worked with the pallet industry as a supplier of nailing solutions, first with his own company, Campbell Atlantic Inc., and then with GBN Manufacturing. He earned the nickname “The Nailerman” for his straight-talking approach and focus on customer service. Campbell Atlantic was an early supplier of automated nailing machines, many of them developed by his father, Alex Campbell.

‘13 KMC 2500 Track Skidder

Item ID: 14078

‘93 Barko 180B

Mary E. Campbell, Sandy’s wife, commented, “Sandy has related to me how he, along with his mom and Sister Jerry, accompanied his dad, Alexander M. Campbell, ‘Alex’ to the first meetings of the Pallet Association, with the ten original members. Seems there were meetings in bars and hotels, some cruise boating and such. We enjoyed attending the meetings in Florida, Arizona and other places.”

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

As Sandy got older he loved RVing and would take his RV to visit customers. “The Campbell family were some of the great pioneers in the pallet industry when it comes to nailing

off onto a conveyor. This is a very well built processor. Item ID 13820.

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Item ID: JW-986495

Contact: Ph: (888) 401-6367 x701

Sam x702

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703 Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

(Continued on page 23)

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Industry Veteran....

(Continued from page 22)

** CALENDAR**

NY STATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

systems. Sandy and his dad, Alex, left a permanent legacy. Sandy was a true original, and someone that I will always remember fondly as a devoted industry supplier and friend,” stated Ed Brindley, the founder of Pallet Enterprise magazine.

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

BANDMILLS & HEADSAWS

Sandy worked with Campbell Atlantic from August 1971 to August 1991 and later joined GBN as a sales representative. Earlier in his life, Sandy served in the Army during the Vietnam War. He was stationed at Ft. Richardson, Alaska. Mary remember Sandy taking her to the area of after a World Pallet Congress meeting in Canada.

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Sandy loved to be behind the controls of airplanes. He also spent many hours traversing the skies as a recreational pilot who could fly through anything. Mary explained, “Sandy was a pilot, having his license, instrument rating and the acquiring his license to fly passenger planes. He landed a small plane in a soybean field just outside of Warsaw, Va., when the cam shaft came through the side of the engine.”

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

&

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

KENTUCKY WOOD EXPO

Eventually, Sandy gave up flying for boating. He initially had a daysailer, then bought a 28' Ericson racing sailboat, then traded it on a 36' Trojan tricabin and then bought the 31' Mainship. He was active in boating for over 23 years. In addition, Sandy was a member of the United States Power Squadrons and the Richmond Power and Sail Squadron, holding a grade of P with both. Mary stated, “One year with the Cooperative Charting Program, Sandy ranked 4th (and I 5th) in the nation.”

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Committed to the community and his friends, Sandy valued his Masonic connections, being a charter member of the Fredericksburg #4 and Edward Cann Masonic Lodge, as well as the Acca Shriners in Richmond, Virginia.

DESIGN DIRECTOR

Donna Heninger

Sandy will be deeply remembered by his wife, Mary Elizabeth; his son, Whitney Alexander; and his sister, Leslie Campbell Graves. Services took place on April 12 at St. Matthew's Episcopal Church in Henrico, Virginia. For condolences, please visit https://www.blileys.com/obituaries/Alexander-Sandy-MurrayCampbell-Jr?obId=31165719.

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

THE PAUL BUNYAN SHOW

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 carriage turners, carriage controls, for

Forester Dislocates Elbow Trying to Stop Fall

BACKGROUND

A forester and his colleague were painting boundary lines in the Appalachians on a wet, cold, and foggy morning in the fall.

PERSONAL CHARACTERISTICS

The forester had nine years of experience in the industry, and he had experienced no accidents related to the job. The forester was aware that, besides driving, slips, trips, and falls can pose the highest risk of injury for anyone working in the forestry sector.

UNSAFE ACT

The forester’s boots did not have suitable tread for the terrain, and he was not using a walking stick. An additional risk was that both of his hands were full, with a coffee cup in one hand and a can of spray paint in the other. The heavy rains from the night before made walking in the area very hazardous. Both foresters had fallen several times during their work that morning.

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

ACCIDENT

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701 ‘83 John Deere 4850

After leaving the county road, the forester followed the old paint to the top of a high ridge. Then he began to work down the next slope when the forester began to feel his feet getting tripped up. He stumbled downhill, gaining momentum like a ball of snow. His head was overtopped by his feet as he stumbled down the steep embankment, out of control.

Item ID: 14073

Contact: Austin Ph: (888) 401-6367 x703

INJURY

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703 Best Value Portable Log Splitter

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Rather than tumble head-first, he elected to try to stop himself on a pole-sized tree. The sheer force of the forester, along with his momentum, dislocated his elbow immediately.

LOGGING EQUIPMENT BANDIT

His elbow was dislocated, and he suffered torn and sprained ligaments and floating bone fragments in the tip of his elbow. A trip to an emergency room and X-rays revealed no broken bones. The elbow was reset and splinted. After four weeks in a splint and sling and an additional six weeks of physical therapy, the forester’s arm was back to 85 percent of its original movement. He was able to work light duty over the next four weeks and did not miss any work except the day of the injury.

RECOMMENDATIONS FOR CORRECTION

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS 2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

• Never walk through timber without a walking stick.

• Always maintain three points of contact.

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

• Always wear proper and adequate footwear matched to the environment where you’re working.

• If ground conditions are hazardous, switch to another job task for that day.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

• Never ignore early signs of possible injury; failure to do so can cause a more serious injury.

• Always tell someone where you’ll be working and give them GPS coordinates when possible.

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production capacity!. Item ID 13421. Sam x702

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘93 Barko 180B

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact:

Email:

Phone:

Item ID: 14073

5519

Contact: JOE

Item ID: 14078

2125

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID:

Contact:

Ph: (888) 401-6367 x701

Contact: Austin

Ph: (888) 401-6367 x703

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Contact: Austin

Contact: AUSTIN

Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

5549

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Contact: AUSTIN

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Sam x702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track Skidder

1996 TIMBERJACK 380C Item ID: 4825

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 98′ JOHN DEERE 640G Item ID: 2694

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TIMBERJACK 208

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

86′ TIMBERJACK 230A Item ID: 3605

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 INT'L CABLE SKIDDER Item ID: 5568

JOHN DEERE 540D Item ID: 5249

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

90′ TIMBERJACK 240A

Item ID: 5082

Contact: AUSTIN

a

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

machine, with air strain conveyers that go

Contact: AUSTIN

and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 FMC 210 Item ID: 5526

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5403

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170 98′ JOHN DEERE 640E Item ID: 2701

JOHN DEERE 440C

Item ID: 5242

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 208

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

PRENTICE 210B Item ID: 5085

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 643J Item ID: 4907

‘83 John Deere 4850

Item ID: 14073

TIMBERJACK 1270 Item ID: 5199

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 BELL SUPER T CUTTER Item ID: 4952

‘05 Gehl CTL 70

Item ID: Contact: Ph:

2016 TAJFUN 400 JOY Item ID: 5227

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

‘16 Halverson H140

Item ID: JW-909632

2022 TIGERCAT 620H Item ID: 5334

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078

13′ BARKO 595ML MAGNUM Item ID: 4974

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

LIEBHERR A312 WITH RYANS HEAD Item ID: 4979

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

EQUIPMENT Item ID: 5368

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 1010

Item ID: 5358

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 538 Item ID: 5302

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

04′ TIGERCAT 620 Item ID: 4705

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 18′ JOHN DEERE 753J Item ID: 4968

Contact: AUSTIN

Email: Austin@lumbermensco.com

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

TIMBCO 445EXL Item ID: 5293

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT D5H TSK Item ID: 4939

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘95 John Deere C6

that Started it All!

2009 JOHN DEERE 548G3 Item ID: 4699

725B TIMBERPRO Item ID: 1398

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AD SUBMISSIONS

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOADER EXCAVATOR 225 LC Item ID: 1067

Contact: MOSE Phone: 208-290-1888

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 450C Item ID: 1369

Contact: ROBERT Phone: 606-875-4783

May be sent tomorris@lumbermens.co

Contact: JOE

POSTMASTER

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 16′ JD 700K Item ID: 4343

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Email: Joe@lumbermensco.com

Contact: KYLE Phone: 807-631-4081 1979 TIMBERJACK 230 CABLE SKIDDER Item ID: 1072

JOHN DEERE 550G CRAWLER DOZER Item ID: 5388

Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

06′ JD 700J LGP Item ID: 3787

Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker available. Buyer pays for trucking, About 80mi south of Louisville, KY

Contact: JOE

Email: Joe@lumbermensco.com

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 748H Item ID: 2707

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 648D Item ID: 547

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

04′ JD 450H Item ID: 4327

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

TIMBER JACK 450B GRAPPLE SKIDDER Item ID: 5452

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

98′ TJ 460 Item ID: 4918

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘83 John Deere 4850

Item ID: 14073

03′ JOHN DEERE 648G III SKIDDER Item ID: 5647

Contact: JOE

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID: Contact: Ph:

Contact: Austin Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Contact: JOE

‘16 Halverson H140

Item ID: JW-909632

Contact: JOE

2010 Shop Built Wood Processor

Email: Joe@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 90′ JD 550G Item ID: 3873

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 450B Item ID: 5098

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 JD 648L Item ID: 5073

Contact: J Williams Ph: (888) 401-6367 x701

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 12′ JD 648H Item ID: 5253

Item ID: 14078

15′ TIGERCAT 610E Item ID: 4944

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

14′ TIGERCAT 720E Item ID: 1617

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

02′ CASE 650H

Item ID: 3511

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

John Deere

JOHN DEERE 643K Item ID: 1531

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170 92′ CAT D5H Item ID: 4678

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Sam x702

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702 BELL

JOHN DEERE 753J Item ID: 1582

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 460D Item ID: 3286

Email: Joe@lumbermensco.com

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ CAT 525B Item ID: 3214

2013 JOHN DEERE 848H Item ID: 2646 98′ CAT 515 Item ID: 4671

Email: Joe@lumbermensco.com

2004 JOHN DEERE 648G3 Item ID: 2628

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

06′ TIGERCAT 635C Item ID: 3322

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15′ CAT 525D Item ID: 3172

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

04′ TIMBERJACK 460D Item ID: 2724

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JOHN DEERE 648G3 Item ID: 2791

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CLARK F666 RANGER Item ID: 3233

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

00′ JD 748G III

Item ID: 3210

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

02′ TJ 660D Item ID: 4088

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

12′ TIGERCAT 620D Item ID: 2753

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

83′ TJ 380A Item ID: 2133

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C

Item ID: 2117

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124 Adams

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 515 Item ID: 1739

04′ JD 435 II Item ID: 4169

Contact: JOE

Email: Austin@lumbermensco.com

‘83 John Deere 4850

Item ID: 14073

15′ CAT 559C LOADER Item ID: 5534

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID: Contact: Ph:

Contact: JOE

Contact: Austin Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

TIMBERJACK 240A GRAPPLE SKIDDER Item ID: 1769

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 17′ JD 437E Item ID: 4809

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: AUSTIN

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140

Item ID: JW-909632

08′ JD 535 SERIES II Item ID: 4580

Contact: J Williams Ph: (888) 401-6367 x701

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

10′ JOHN DEERE 648H Item ID: 1847

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track

Contact: Austin Ph: (888) 401-6367 x703

Contact: ERVIN Phone: (641) 229-1012 CAT 515 Item ID: 1509

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

TIMBERJACK 460 Item ID: 1777

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

capacity!. Item ID 13421.

04′ TIMBERJACK 460D Item ID: 5445

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

00′ TIGERCAT 245 Item ID: 4685

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 TIGERCAT 630E Item ID: 1098

13′ TIGERCAT 234 Item ID: 4803

Contact: JOE

Email: Austin@lumbermensco.com

Email: Joe@lumbermensco.com

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Runs Great!. Item ID

95′ PRENTICE 210E

Item ID: 3628

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Sam x702 BARKO

John Deere C6

98′ PRENTICE 280 Item ID: 2166

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

840.4 Item ID: 1222

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

DEERE 1010D Item ID: 1715

Contact: JAKE Phone: (440) 537-5124

Contact: AUSTIN

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2014 PONSSE SCORPION KING Item ID: 4914

840.2 FORWARDER Item ID: 741

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 KOBELCO 250 LOG LOADER Item ID: 2584

Low hours

Email: Austin@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 VALMET 644 Item ID: 1480

Contact: AUSTIN Email: Austin@lumbermensco.com

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

DEERE 437D Item ID: 2740 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

DEERE 1270 Item ID: 1350

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48"

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

TIMBCO

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

onto a conveyor. This is a very well

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

processor. Item ID 13820. Sam x702 Firewood Processor - This is Chipper - Cat Under Carriage at

Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super

WOODMIZER LT

Item ID: 4549

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

SAWMILL Item ID: 5559

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 EARLY 90’S MELLOTT DEBARKER Item ID: 3329

19′ MORGAN MILITARY NOTCHING BAND SAW Item ID: 3567

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

AUSTIN Email:

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 2419

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148 CORNELL SIZER Item ID: 1322

AUSTIN

AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

5274

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID: 14073

Contact: JOE

AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID: Contact: Ph:

MACK TRUCK WITH HOOD LOADER Item ID: 1089

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

568

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID:

Contact: AUSTIN

Contact: Austin Ph: (888) 401-6367 x703 ‘13 KMC

2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: Austin Ph: (888) 401-6367 x703 ‘93 Barko 180B

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 01′ MACK RD688 Item ID: 4479

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: SAM Email: Sam@lumbermensco.com

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

FOR SALE Item ID: 5413

Contact: AUSTIN

Email: Austin@lumbermensco.com

‘95 John Deere C6

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 NYLE FIREWOOD DRY KILN Item ID: 3588

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 WARRATAH FS20 Item ID: 2100

Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Value! PA. Item ID 12062.

AD DIRECTORY

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

20,000lb goose neck trailer. Item ID

Sam x702