Sam x702
Firewood Processor - This is
‘83 John Deere 4850
Item ID:
Contact:
Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production capacity!. Item ID 13421. Sam x702
grapple, 5,000 original hours. (excellent condition.). Item ID on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL
www.empirehyd.com info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO)
J Williams (888) 401-6367 x701
‘05 Gehl CTL 70
Item ID: JW-986495
‘83 John Deere 4850
Item ID:
Contact: Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS
Contact: J Williams Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
published reaching pallet industrial worldwide.
Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.
SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.
CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.
REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertisers. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every
JW-909632
CABLE SKIDDER
It’ll come with brand new tire chains on it, Everything still works as it should, Gears shift smooth, engine has no blow-by’s, No leaks, been well maintained, Starts right up and goes to work, He’s an old man, but could have videos available for those that can’t go look at it. One owner only, and he’s retiring. A few of the good ones left out there, Delivery available as well. Buyer pays for trucking, About 200mi east of Cincinnati OH
machine, and is currently in the woods working daily.
Item ID 5249. Austin x703
JOHN DEERE 440C
John Deere 440C for sale, Skidder has a brand new motor in it, along with new clutch, new pressure plate, and new radiator, and rebuilt steering box. Winch was recently rebuilt as well. Skidder is tight and dry, and will come with a full set of ice chains. Call/email for more information.
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Item ID 5568. Joe x709
TIMBERJACK 208
208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.
Item ID 5320. Austin x703
JOHN DEERE 540D
‘83 John Deere 4850
Item ID: 14073
Contact: Austin Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
John Deere 540D cable. Skidder has new transmission, new hydraulic pump, and all of the cylinders were recently repacked. Has 23.1 tires all around and comes with new set of bear claw chains. This Skidder has been a dependable
Item ID 5242. Austin x703
90′ TIMBERJACK 240A
Contact: J Williams
Ph: (888) 401-6367 x701
new center pins in box current pins are fine. Minor leaks, good running machine.
Item ID 4825. Austin x703
02′ JOHN DEERE 640G2
2002 John Deere 640G2
4 speed, Winch works well, Tires size: 23.1, Center section good, Runs and operates as it should
Item ID 3517. Joe x709
98′ JOHN DEERE 640E
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘05 Gehl CTL 70
Item ID: JW-986495
1990 Timberjack 240A cable Skidder that’s working daily. Has a 5.9 cummins engine. Both the engine and transmission were rebuilt in 2021 with paperwork showing the work. Winch transfer case was also rebuilt shortly after. Pins and bushings are all tight, and is woods ready. Call/Email for more information.
Contact: J Williams Ph: (888) 401-6367 x701
Item ID 5082. Austin x703
1996 TIMBERJACK 380C
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
1996 Timberjack 380C 5.9 Cummins, 4 speed Clark Transmission 4 forward, 4 reverse, chains all around, new cable, new steering pins, have
-Small manufacturer in PA has made the best valued log splitter.
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the transmission was rebuilt around the same time. Has all new bearings in the front end, as well as a new seat, new gauges, new heater, new glass, and new lights. Has 23.1’s on it with brand new chains on the front. On a job now. Call for more info.
Item ID 4710. Austin x703
86′ TIMBERJACK 230A
1998 John Deere 640E cable skidder with 10000 original hours, this skidder was bought directly from the original owner/operator. Everything works like it should. Call for more info.
Item ID 2701. Austin x703
98′ JOHN DEERE 640G
capacity!. Item ID 13421. Sam x702 BARKO
off onto a conveyor. This is a very well built processor. Item ID 13820.
Motor rebuilt about 10 hrs ago,
Sam x702
Same with brakes and new clutch / pressure plate (10hrs ago), This is in good conditions, NOT old junk. It’s good to go to work, Owner for 10+yrs, and used for jobs here and there, been the family skidder, Can take videos of it if you can’t go look at it, Can help trucking it anywhere in the US, About 80mi south of Baltimore, MD
Item ID 3605. Joe x709
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
FRANKLIN 170 SKIDDER
98ʹ Model John Deere 640G with 10000 original hours, very straight skidder that was bought from the original owner/ operator, everything works like it should. Call for more info.
Item ID 2694. Austin x703
JOHN DEERE 440C’S PACKAGE DEAL
Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily. The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.
Item ID 1966. Austin x703
LOGGING EQUIPMENT BANDIT
Detroit 453 engine, Powershift,
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702 1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
1983 JOHN DEERE 640C
John Deere 640C grapple skidder, has rebuilt transmission less than 200 hours ago, motor is strong with no blow by. Tight and has been well maintained. Call/Email for more information.
Item ID 5582. Austin x703
FMC 210
FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours. Skidder was refurbished in 1089 used in a handful of
logging jobs in the early 90’s followed by light service in shot in 2018. Call/Email for more information.
Item ID 5526. Austin x703
CAT 225LC EXCAVATOR
Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples. Call for more information.
Item ID 5419. Austin x703
06′ JOHN DEERE 335 LOG LOADER
Motor has brand new pump.
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
‘83 John Deere 4850
Item ID: Contact: Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Does not smoke at all, New manifold, Brakes and lights all work, A/C – heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him to sell it, Delivery available as well. Buyer pays for trucking, About 70mi west of Orlando FL Item ID 5403. Joe x709
Contact: J Williams
Ph: (888) 401-6367 x701
TAJFUN EQUIPMENT
Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery
‘13 KMC 2500 Track
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
makes high quality equipment. Call us for more information and a competitive quote today!
Item ID 5368. Austin x703
‘05 Gehl
CTL 70
Item ID: JW-986495
Contact: J Williams Ph: (888) 401-6367 x701
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.
TIMBERJACK 1010
‘93 Barko 180B
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
Timberjack 1010 double bunk forwarder, machine has around 15000 frame hours, and has had a lot of recent work done to it. That work includes: New Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals in driveline. It will come with a set of eco tracks for the back, and set of wheel track for the front which are brand new. This is a straight machine that is not bent or busted up. It has had the same owner/operator since it had 6000 original hours on it. Owner is only selling to retire. Call/Email for more information.
‘95 John Deere C6
Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702 BARKO
Item ID 5358. Austin x703
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous on injection pump. always started good. in good working order. 22in
1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny
2022 TIGERCAT 620H
2022 Model Tigercat 620H
“Precision Under Pressure”
grapple skidder with 660 original hours, has bogie grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the grill. Skidder is in excellent shape. Call/Email for more information.
www.empirehyd.com Email info@empirehyd.com
every time. Has new starter, everything else on it works like it should.
Item ID 5320. Austin x703
CAT 538
2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.
Needs nothing, working daily. Call/Email for more information.
Item ID 5293. Austin x703
2016 TAJFUN 400 JOY
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Item ID 5334. Austin x703
TIMBERJACK 208 208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up
Item ID 5302. Austin x703
TIMBCO 445EXL
Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced.
2016 Tajfun 400 Joy firewood processor, unit includes log lift, and outfeed conveyer. Machine has been a one owner/one operator unit since new and is in excellent condition. Call/ Email for more information.
Contact: J Williams Ph: (888) 401-6367 x701
Item ID 5227. Austin x703
TIMBERJACK 1270
2003 Timberjack 1270
Processor, machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine. Recent work includes a new ECU, new injectors, new fuel pump, new fuel lines, new wiring harness, new chip, new rear window, all new head cylinders, and pins/bushings, new encoders, and new seal kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.
‘93 Barko 180B
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great.
Item
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth
Item ID 5199. Austin x703
‘95 John Deere C6 Tree Farmer
PRENTICE 210B
Item ID: 13920
Contact: Austin Ph: (888) 401-6367 x703
210B Prentice Knuckleboom, comes with reversible csi bucksaw. Works everyday, has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight and good loader. Only thing it does need is brakes.
well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO
Item ID 5085. Austin x703
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous on injection pump. always started good. in good working order. 22in
meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny
LIEBHERR A312 WITH RYANS HEAD
“Precision Under Pressure”
1998 Model Liebher A312 mobile wheeled excavator with 9300 hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new lights, and back up camera. The Ryans head has low hours as well.
Email info@empirehyd.com
the pumps rebuilt. Good, solid loader everything on it works as it should. Call/Email for more information.
Item ID 4974. Austin x703
18′ JOHN DEERE 753J
Item ID 4979. Austin x703
13′ BARKO 595ML MAGNUM
2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of
2018 John Deere 753J with 6000 original hours. Ready to work, only selling to downsize. Has good undercarriage, and hotsaw head. Call/Email for more information.
Item ID 4968. Austin x703
BELL SUPER T CUTTER
Bell Super T 3 wheel machine,
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
has the deutz air cooled engine, with a 30” dangle head. Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L and will come with chains as well. Overall in good condition, and ready to work. Call/Email for more information.
information.
Item ID 4939. Austin x703
643J
‘93 Barko 180B
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Item ID 4952. Austin x703
Contact: J Williams Ph: (888) 401-6367 x701
CAT D5H TSK
Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work. Call/Email for more
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
2007 643J cutter with 12,700 hrs, thinning saw head, 28LX26 tires, new starter,batteries, alt, gear box rebuilt, motor runs great uses no oil, does have a Hydraulic leak or 2, needs a bushing in one of cylinder arms, also comes with a 843J parts machine, has a tpost saw head,motor and Hydraulics are good 30k for both
Item ID 4907. Austin x703
04′ TIGERCAT 620
‘95 John Deere C6 Tree Farmer
Item ID: 13920
Contact: Austin Ph: (888) 401-6367 x
2004 Tigercat 620 Tigercat Grapple skidder has brand new engine in it, with less than 10 hours on it, and comes with a year warranty. Machine itself is pretty tight, speed control valve is new, main pumps are fairly new as well. Has heat/Ac, every function on the skidder works. Call for more info.
Item ID 4705 . Austin x703
well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
2009 JOHN DEERE 548G3
2009 John Deere 548G3 with 7700 original frame hours, skidder is tight, and has a new engine in it with less than 400 hours on it. New 28L tires, Everything on the machine works like it should. Call for more info.
Item ID 4699. Austin x703
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
14′ JOHN DEERE 748H
2014 John Deere 748H model with 15000 frame hours, everything works like it should. Recently had new pins and bushings, and new motor installed just over a year ago. Equipped with sweda axles. Call for more info.
Item ID 2707. Austin x703
2016 HYPRO 755HB PROCESSOR
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
BELL
Tractor is a 1985 Versatile 276 tractor that has a flex plate between the engine and pumps, equipped with skid plate under the engine, and some new lights. Engine is a 140HP cummins, and has 3200 hours on it. The Hypro only has 350 hours on it and is in great shape. Call for more information
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Item ID 2593. Austin x703
TIMBCO 425D
Timbco 425D – Year 2001 –Quadco 20 360 degree head
– 8.3 Cummins – Hours 7000 / 300 hours on caterpillar undercarriage – new planetary spindle. bearings and one seals in both sides.
’92 TIMBERJACK 450C
10K frame hours – single arch –power-shift trans – tire size 28Ls
NY STATE WOODSMEN'S FIELD D AYS
– Tire tread: 20% front, 70% back – 5.9 cummins – Winch works –center section is tight – no major slack, dry machine, no leaks
Item ID 1369.
Tires are at 60%, comes with a spare tire. Text or email for more pictures
Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
Item ID 1124. Marcus (660) 833-9061
1979 TIMBERJACK 230 CABLE SKIDDER
LOG LOADER
EXCAVATOR 225 LC
1986 Caterpillar excavator with a 3208 engine 5000 hours, total hours is 19000, Grapple, heals, bucket.
Item ID 1067.
BANDMILLS & HEADSAWS
Mose (208) 290-1888
Item ID 1429. Austin x703
725B TIMBERPRO
The Tree that Started it All!
Well Maintained machine, tight and dry work ready with a Rolly II head. make an offer! Call for more pictures.
Robert (606) 875-4783
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com
TIGERCAT 822
Item ID 1130. Austin x703
72ND
460 TIMBERJACK
Item ID 1398. Austin x703
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Woods Publishing
ADVERTISING SALES
Morris Woods
New Motor, new center pins, and Hyd Pump Cummins = 100hours on the new parts ,
1979 Timberjack 230 Cable Skidder. Starts and runs perfect. Excellet condition, Excellent tires. Eaton Winch, Straight Blade. Call for more pictures.
Item ID 1072.
Kyle (807) 631-4081
PRENTICE 384 KNUCKLEBOOM LOADER
2002 prentice 384 Knuckleboom. Saw not included. Mounted on ’89 S 2500 International truck. Knuckleboom carrier/trailer also available.
Item ID 978. Austin x703
Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is
B & B Manufacturing
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
York. We have been in business since January 1985 producing wood bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry. We have geared our machinery to meet the needs of various producers. We offer several different types of equipment for packaging your wood from shrink wrapping, stretch wrapping and bagging. However you wish to BUNDLE we have a system for you.
AD SUBMISSIONS
May be sent tomorris@lumbermens.co
All these systems provide convenient packaging of waste-wood, slabs, edgings and rewood for the consumer market.
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.
Affordable and Easy to Operate • INCREASE YOUR WOOD PROFITS! WOOD-PACKAGING has come into its own. YOUR ONE-STOP SHOP FOR BUNDLING SUPPLIES
TIMBERJACK 380C GRAPPLE SKIDDER
“Precision Under Pressure”
1994 timberjack 380C 5.9 Cummins, 12 valve, 4 speed Clark transmission 4 forward 4 reverse, external tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls. Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures! Item ID 863. Sam x702
JOHN DEERE 648D
Email info@empirehyd.com
as it should, This is his back-up dozer, why he’s selling. Doesn’t need it much anymore, Delivery available as well. Buyer pays for trucking, About 50mi south of Cincinnati OH
Item ID 5388. Joe x709
16′ JD 700K
available. Buyer pays for trucking, About 80mi south of Louisville, KY
Item ID 3787. Joe x709
12′ JD 550K LGP
‘16 Halverson H140 Skidsteer (DEMO)
new main drive shaft, motor rebuilt 200 or so hours ago, rebuilt fuel injector, hydraulic rebuilt, grapple rebuilt, w/winch single arch tight machine 60% rear 40% front 28l’s Item ID 547. Sam x702
JOHN DEERE 550G CRAWLER DOZER
New head gasket, Both final drives replaced, U/C tread: Approx. 75%, 20 inch pads, Direct drive, Pedal steer, Winch works well, it’s the JD 4000 series, Everything works
6 Way blade, Fully Enclosed cab, Forestry Package with winch, Wide pads, A/C – heat work, Owner has had it sine purchase. Now done with his project. Got himself something else, smaller, All controls work as they should, These go for $170$175K anywhere you look (for the year), and without a winch. This one has everything. Have a reliable trucker available. Buyer pays for trucking, About 150mi south of Louisville, KY
Item ID 4343. Joe x709
06′ JD 700J LGP
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703
USes 10”, 12“ and 14” Blades to MAKE UP TO 8 RIPS AT once, LAser line projector, 22-125 FPM POWER FEED CONVEYOR, UPPER AND LOWER ANTI-KICKBACK FINGERS, 40HP SPINDLE MOToR, 2 HP CONVEYOR MOTOR, INFEED TABLE, OUTFEED TABLE, DIGITAL HEIGHT ADJUSTMENT, 6” DUST PORT, BLADE ACCESS DOOR
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS
Item ID: Contact: Ph:
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
Not available online call: 360.243.5438 Ships from Bellingham, Wa 98229
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Rollers sprockets, chain and pads all re-done about 75hrs ago, Just had a John Deere 4000hrs service, All fluids an upgrades are up to date, No issues, very clean, no leaksI’d say machine is mint, Tracks are 24 inches with a 10’2” wide blade, Brand new U/C, 95%, Forestry package with winch, Enclosed cab, A/C and heat works and everything else, Owner is going with a bigger dozer, Ready to go to work, really solid dozer! Information provided is to the best of our knowledge and what owners tell us
Item ID 3753. Joe x709
‘13 KMC 2500 Track Skidder
JD 550G LT
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
Mid 90’s model, Original hours, Forestry package with a winch. It pulls good, UC tread: about 70%, Nothing wrong whatsoever with dozer, Been well kept and used sporadically by him and his son, little jobs
off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor
here and there, They’re buying a skidder with the money they get from this, why are they selling it, Have a reliable trucker available. Buyer pays for trucking, In KY, about 90mi. north of Nashville TN Item ID 3686. Joe x709
‘93 Barko 180B
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
14′ JD 650K LGP
29 inch pads, All bushings are tight, Dry, no leaks, Pre def emission delete engine turned up 20hp, Forestry package, Winch on it only been used about 600hrs, 10 foot 4 inch blade, Owner is retiring, Can help trucking it anywhere in the US, In the Fresno, OH area
Item ID 3574. Joe x709
CAT D6K2
Item ID: 13920
Contact: Austin Ph: (888) 401-6367 x703
2015 model in excellent condition, currently has 1750 hours, has enclosed cab with heat and air, undercarriage is around 75%, working daily. Call for more info Item ID 1488. Austin x703
capacity!. Item ID 13421. Sam x702 BARKO
92′ CAT D5H
Item ID 4678. Joe x709
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous
good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny ‘95 John Deere C6 Tree Farmer
as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
‘83 John Deere 4850
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
04′ JD 450H
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
Wide tracks, limb raisers, AC/ Heat, all controls work, Dozer is in really MINT conditions, One original owner, used for local jobs, not a major operation, He’s now 70yrs old and he’s willing to sell. He’s using it for one more week or so to finish a little job he has left, Have a reliable trucker available. Buyer pays for trucking, About 40mi south of Nashville, TN
Item ID 4327. Joe x709
90′ JD 550G
the best of our knowledge and what owners tell us Item ID 5647. Joe x709
’95 JOHN DEERE 548G II SKIDDER
‘93 Barko 180B
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
He has all of the side cab screens and the rock guards, Winch is strong, New hydraulic pump, New transmission pump, New batteries, U/C is at about 60% tread, New front idler & track adjuster, Runs well, no issues, Direct drive, Been serviced regularly, all the paperwork avail., Owner is done with the project, letting it go, Have a reliable trucker available. Buyer pays for trucking, Better pictures avail. upon request, About 100mi south of Columbus, OH Item ID 3873. Joe x709
‘95 John Deere C6 Tree Farmer
Item ID: 13920
Contact: Austin
Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
02′ CASE 650H
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
4BT Cummins engine, Wide tracks, Open ROPS, Undercarriage tread: 80%, 2 owners only. Current owner owned it for 2yrs. Owner is retiring and doesn’t make much use of it, Every control works. All works and operates as it should, Videos available for serious inquiries, Can help trucking it anywhere in the US, About 60mi south of Kansas City, MO
Item ID 3511. Joe x709
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
03′ JOHN DEERE 648G III SKIDDER
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Hours Meter Reading: 13000, Tires size: 28L 26, Axes 1400, A/C works, heat good, Winch works fine, Direct Drive machine, Transmission was rebuilt at 10000 hours by current owner, Engine re-done by previous owner, about 4yrs ago, Owner bought a smaller, a bit newer skidder, Delivery available as well. Buyer pays for trucking, About 90mi west of Birmingham AL, Information provided is to
New reman motor put in 4-5mo. ago (all receipts available). Work done by Schaefer Enterprises in Wolf Lake, IL, Skidder will be ready for delivery on/around Nov. 16, because bottom center pins are currently being re-done, Almost all new U-joints thru the drive line, Skidder was at work every day until last week, now at shop for pins, Diff. lock works, Tires size: 28L’s (Primex), Tires tread: 80% all around, Turn cylinders are repacked, Everything works as it should, 1yr owner. Reason for selling he has another skidder bought, needs $$$ back in his pocket, Delivery available as well. Buyer pays for trucking, Closest city is Jefferson MO, 80mi south of it
capacity!. Item ID 13421. Sam x702 BARKO
Item ID 5605. Joe x709
TIMBER JACK 450B GRAPPLE SKIDDER
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Cummins engine strong, no issues, It’s got a winch, works well, Tires tread: 60%, Powershift, Everything work and operates as it should, All controls work, Owner has had it for many years, he’s old and retiring, why selling, Delivery available as well. Buyer pays for trucking, About 60mi north of Atlanta, GA
Item ID 5452. Joe x709
12′ JD 648H
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702
BELL
Engine is still going strong, original motor. Previous owner re-built it at around 9000hrs, Tires size: 30.5, Tires tread: 50-60% all around, A/C and heat work, Grapple and winch both work well, Center section is good. Previous owner had center section re-done (5yrs+ ago), Owner has had it for 5yrs+, getting rid of one crew, Delivery available as well. Buyer pays for trucking, About 90min. drive north west of Orlando, FL
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Item ID 5253. Joe x709
TJ 450B
5.9 Cummins engine, Tires size:
“Precision Under Pressure”
30.5’s, Tires tread %: about 70% all around, Esco grapple, Winch works, Can have owner do videos for those that can’t go look at it, Delivery available as well. Buyer pays for trucking, About 60mi. north of Jackson MS
daily. Call/Email for more info. Item ID 4944. Austin x703
Email info@empirehyd.com
Item ID 5098. Joe x709
JD 648L
Dual arch, Center section is tight, Tires tread: approx. 40% front, 60% back, A/C – Heat work, Pins are tight, no leaks, Clean woods ready skidder, Owner is changing business, going into trucking, Have a reliable trucker available. Buyer pays for trucking, About it and 70mi north of Jackson, MS
Item ID 5073. Joe x709
15′ TIGERCAT 610E
2015 model Tigercat 610E grapple and winch, dual arch Skidder. Has 8400 frame hours, with brand new hydrostats. Skidder is currently working
98′ TJ 460
Cummins motor (put on approx. 2yrs ago), Tires size: 28L’s, Tires tread: approx. 40% all around, New 1” main line on 120” grapple, Charge pump replaced a few years back, New EGS shifter, Winch works fine, Original Cummins motor, Being used as a spare skidder. Owner makes little use of it, why he’s selling, About 150mi. east of St. Louis, MO by Evansville, IN Item ID 4918. Joe x709
98′ CAT 515
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Will have more pictures for serious inquiries, Single arch, Transmission has been rebuilt, before owner bought it 4years ago, 50 ton CAT winch, Only thing owner has done to it is he replaced the internal filter up under belly pan, A/C doesn’t work, Heat does, Other than that, he’s had no issues. Only reason for selling is he can’t keep people at work, so…. he’s selling, Have a reliable trucker available. Buyer
pays for trucking, About 100mi north of Johnstown, PA
Item ID 4671. Joe x709
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams
Ph: (888) 401-6367 x701
99′ FRANKLIN 170 5.9 Cummins engine, Powershift, Tires tread: 70-80% on all of them, Enclosed cab, Single arch, ESCO grapple, Machine needs work, Center Section is good, Owner is just getting rid of his last skidder. Have a reliable trucker available. Buyer pays for trucking, About 90min. drive north west of Orlando, FL. Information provided is to the best of our knowledge and what owners tell us. We just broker it
Item ID 4586. Joe x709
02′ TJ 660D
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
2010
-It
13′ JD 648H
Motor was rebuilt 16 months ago, Tires size: 30.5’s, Tires tread: back 100%, front 3040%, Missing door on engine compartment on the right side, Center pins are good, A/C and heat both work, This skidder only logged 1-3 days a week for the past 2 years. Spare skidder, Dual arch, Winch is missing the cable, owner never used the winch at all, Owner just put $2k worth of new pins and bushings on the boom, Grapple works, no leaks. Starts right off, Can help trucking it anywhere in the US, About 160mi south of Tallahassee, FL Item ID 3589. Joe x709
‘93 Barko 180B
Item ID: 14077
Contact: Austin
Ph: (888) 401-6367 x703
‘95 John Deere C6 Tree Farmer
06′ TIGERCAT 635C
Item ID: 13920
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
3800hrs on rebuild motor, done 3yrs ago by current owner, Dual arch, Cummins engine, Tires size 30.5×32’s, Tires tread: 30% , He owned it for 3yrs and he’s getting out of logging now, Have a reliable trucker available. Buyer pays for trucking, About 140mi south of Springville, MO. It’s in Arkansas Item ID 4088. Joe x709
2006 Tigercat 635C Bogie Skidder, has a 8.3 Cummins engine, with a lot of recent work done, including totally new updated bogies, new front tires, rebuilt motor, and other work. Skidder has been well maintained and is ready for the woods. Call for more info. Item ID 3322
Contact: Austin Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous good. in good working order. 22in
1999
meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Center pins are re-done, tight, no play, Owner redid the top of the motor, because he had to do a crank seal, Winch works, but needs a cable (broke last winter), Transmission re-done by private mechanic by previous owner, right before current owner bought it, Inside cab is clean, all controls work, A/C works, heat, too, Center section pins re-done, just like new, Tires size: 30.5’s, Tires tread: 70-80% all around, with chains coming with it, Bushings in the grapple are re-done, Motor re-done at 10000hrs by previous owner, about 4yrs ago. Owned for 3 yrs. He bought it off of a friend that quit logging, About 90mi south of Syracuse, NY
“Precision Under Pressure”
size: 30.5×32, Clark transmission, 3 gears, Clark winch, Owner has the doors for it, Owner is in NO HURRY to sell, will only sell for $44K, nothing less, About 130mi east of Pittsburgh, PA Item ID 3233. Joe x709
02′ CAT 525B
Item ID 3286. Joe x709
CLARK F666 RANGER
This machine is as GOOD and as TIGHT as they come for being an old Clark, It’s a new Cummins engine, Heater works, A/C doesn’t, Torque Converter, no clutch, New cradle pins/bushings, One is loose one on the main grapple, Grapple is rebuilt, Tires
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Approx. 4000hrs ago transmission, and engine were re-done right before current owner bought it 2yrs ago. No winch, Center pins have a lil’ wear, but can pull just fine as it is. Owner will include brand new center pins and all needed parts he bought to get them changed, but never got around to do it, Tires size: 30.5, Tires tread: 50% all around, always been used with chains, Tire chains don’t come with it. Owner put them on his new skidder, Inside cab, all controls, functions work. Seat in great shape still, Heat works, A/C works but doesn’t blow too cold, maybe needs a re-charge, Owner upgraded to a CAT C series, doesn’t need this anymore, He’s had no issues the time he’s had it, everything else works as it should, Been parked
since May, Everything else works and operates as it should, About 150mi north of Boston, MA Item ID 3214. Joe x709
00′ JD 748G III
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
‘93 Barko 180B
‘83 John Deere 4850
Item ID: Contact: Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
‘05 Gehl CTL 70
Item ID: JW-986495
Contact: J Williams Ph: (888) 401-6367 x701
FIREWOOD PROCESSORS 2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
Hours Meter Reading: 16000 +/-, New bearings, Main boom bushings re-done, It has a brand new A/C unit in it, Tires size:35’s, Tires tread: approx. 50-60% all around, Center pins have a lil’ play, but not bad, Motor is strong, no blow-by, Transmission needs clutch packs for 1st and 2nd gear (5-10K fix). Machine will move, but won’t pull a log in 1st & 2nd gear. All other gears work smooth. Owner doesn’t log anymore, and sees no need of fixing it, Owner bought it from a friend who owned it for 5yrs. He has had it for 2yrs now, no issues, just maintained it and put $10,000+ in it without much use. About 30-35mi east of Gainsville, FL Item ID 3210. Joe x709
15′ CAT 525D
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
mechanic installed it. Can provide invoices of work done, Dual arch, No winch, A/C and heat both work fine, Center section pins done in 2020, Tires tread: 50%, Tire chains come with it, Transmission was redone by CAT, when CAT started redoing the D models, couple years ago, Owner is getting out of logging, Owner will throw one brand new spare tire with sale, Everything works as it should, Owner is selling his logging equipment after being a logger for 40 yrs., About 250mi north of Albany, NY
Item ID 3172. Joe x709
98′ JOHN DEERE 648
‘95 John Deere C6 Tree Farmer
Item ID: 13920
Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702 BARKO
Frame hrs: less than 13000, New motor put in at 10K hrs. Private
98ʹ Model John Deere 648 skidder in good condition, has new transmission in it with less than 500 hours on it, engine has been rebuilt in the past, and doesn’t have any blow by or leak any oil. It could use a new rotator for the grapple. Other than that, all of the pins and bushings are tight, and the skidder is ready for the woods. Item ID 2798. Austin x703
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Manufacturing a full line of biomass fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels. Large or small scale, project management is eased with the impressively short installation time required with prefabricated modular components. with
Sam x702
LOGGING EQUIPMENT BANDIT
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 4680 -
3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
