Lumbermens October 2024 Magazine

Sam x702

Firewood Processor - This is

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production capacity!. Item ID 13421. Sam x702

grapple, 5,000 original hours. (excellent condition.). Item ID on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

Donna Heninger

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams (888) 401-6367 x701

‘05 Gehl CTL 70

Item ID: JW-986495

‘83 John Deere 4850

Item ID:

Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

published reaching pallet industrial worldwide.

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertisers. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every

TIMBERJACK 208

It’ll come with brand new tire chains on it, Everything still works as it should, Gears shift smooth, engine has no blow-by’s, No leaks, been well maintained, Starts right up and goes to work, He’s an old man, but could have videos available for those that can’t go look at it. One owner only, and he’s retiring. A few of the good ones left out there, Delivery available as well. Buyer pays for trucking, About 200mi east of Cincinnati OH

208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.

Item ID 5320. Austin x703

JOHN DEERE 540D

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID 5568. Joe x709

John Deere 540D cable. Skidder has new transmission, new hydraulic pump, and all of the cylinders were recently repacked. Has 23.1 tires all around and comes with new set of bear claw chains. This Skidder has been a dependable machine, and is currently in the woods working daily.

Item ID 5249. Austin x703

‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

JW-909632

JOHN DEERE 440C

Contact: J Williams Ph: (888) 401-6367 x701

John Deere 440C for sale, Skidder has a brand new motor in it, along with new clutch, new pressure plate, and new radiator, and rebuilt steering box. Winch was recently rebuilt as well. Skidder is tight and dry, and will come with a full set of ice chains. Call/email for more information.

Item ID 5242. Austin x703

‘13 KMC 2500 Track Skidder

90′ TIMBERJACK 240A

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

1990 Timberjack 240A cable Skidder that’s working daily. Has a 5.9 cummins engine. Both the engine and transmission were rebuilt in 2021 with

off onto a conveyor. This is a very well built processor. Item ID 13820.

paperwork showing the work. Winch transfer case was also rebuilt shortly after. Pins and bushings are all tight, and is woods ready. Call/Email for more information.

Item ID 5082. Austin x703

1996 TIMBERJACK 380C

1996 Timberjack 380C 5.9 Cummins, 4 speed Clark

Item ID:

Transmission 4 forward, 4 reverse, chains all around, new cable, new steering pins, have new center pins in box current pins are fine. Minor leaks, good running machine.

capacity!. Item ID 13421. Sam x702 BARKO

Item ID 4825. Austin x703

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous on injection pump. always started good. in good working order. 22in

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!.

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

1: 10AM | October 16 - 23

Day 2: 10AM | October 17 - 24

Day 3: 10AM | October 18 - 25

Preview: 8AM - 4PM | October 21 & 22

Location: 1182 Pruner Rd., Riddle, OR 97469

CAROTHERS

WOODS

02′ JOHN DEERE 640G2

2002 John Deere 640G2 Cable skidder with 14000 frame hours, has new motor in it with less than 200 hours on it, and the transmission was rebuilt around the same time. Has all new bearings in the front end, as well as a new seat, new gauges, new heater, new glass, and new lights. Has 23.1’s on it with brand new chains on the front. On a job now. Call for more info. Item ID 4710. Austin x703

“Precision Under Pressure”

86′ TIMBERJACK 230A

Motor rebuilt about 10 hrs

ago, Same with brakes and new clutch / pressure plate (10hrs ago), This is in good conditions, NOT old junk. It’s good to go to work, Owner for 10+yrs, and used for jobs here and there, been the family skidder, Can take videos of it if you can’t go look at it, Can help trucking it anywhere in the US, About 80mi south of Baltimore, MD

Item ID 3605. Joe x709

FRANKLIN 170 SKIDDER

Detroit 453 engine, Powershift, 4 speed, Winch works well,

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Tires size: 23.1, Center section good, Runs and operates as it should

Item ID 3517. Joe x709

98′ JOHN DEERE 640E

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

1998 John Deere 640E cable skidder with 10000 original hours, this skidder was bought directly from the original owner/operator. Everything works like it should. Call for more info.

Item ID 2701. Austin x703

98′ JOHN DEERE 640G

98ʹ Model John Deere 640G

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

with 10000 original hours, very straight skidder that was bought from the original owner/operator, everything works like it should. Call for more info.

‘93 Barko 180B

Item ID 2694. Austin x703

Item ID: 14077

‘05 Gehl

CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

Contact: Austin Ph: (888) 401-6367 x703

JOHN DEERE 440C’S PACKAGE DEAL

Up for sale are two John Deere 440C Cable skidders, one is in great shape, winch just totally rebuilt and and working daily. The other has the transmission out of it, the trans has been rebuilt, but has not been put back in the skidder. Call for more info.

Item ID 1966. Austin x703

1983 JOHN DEERE 640C

John Deere 640C grapple skidder, has rebuilt transmission less than 200 hours ago, motor is strong with no blow by. Tight and has been well maintained. Call/Email for more information.

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 5582. Austin x703

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny ‘95 John Deere C6

on injection pump. always started good. in good working order. 22in

FMC 210

FMC 210 CA 5250 track skidder, needs the transmission rebuilt. It has a 653 Detroit motor in it with low hours. Skidder was refurbished in 1089 used in a handful of logging jobs in the early 90’s followed by light service in shot in 2018. Call/ Email for more information.

“Precision Under Pressure”

Call for more information.

Item ID 5419. Austin x703

Email info@empirehyd.com

06′ JOHN DEERE 335 LOG LOADER

Item ID 5526. Austin x703

CAT 225LC EXCAVATOR

Cat 225 machine starts right up, and has no big leaks. Will include a 28” and 48” bucket, also will include set of grapples.

Motor has brand new pump. Does not smoke at all, New manifold, Brakes and lights all work, A/C –heat work well, Machine is dry, has no leaks, Boom is strong. Fast loader, Turn bearings are good, Owner’s health is causing him to sell it, Delivery available as well. Buyer pays for trucking, About 70mi west of Orlando FL

Item ID 5403. Joe x709

TAJFUN EQUIPMENT

Lumbermens is a proud dealer for Tajfun equipment, from logging winches, to cranes, to firewood processors, Tajfun machinery makes high quality equipment. Call us for more information and a competitive quote today!

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Item ID 5368. Austin x703

Contact: J Williams Ph: (888) 401-6367 x701

TIMBERJACK 1010

Timberjack 1010 double bunk forwarder, machine has around 15000 frame hours, and has had a lot of recent work done to it. That work includes: New

Reman Perkins engine, New Radiator, Rebuilt Clark 3 speed tranny, Brand new bushings and pins in center section, rebuilt cylinders in boom and in the steering, New set of sure grip grapples, new seals in driveline. It will come with a set of eco tracks for the back, and set of wheel track for the front which are brand new. This is a straight machine that is not bent or busted up. It has had the same owner/operator since it had 6000 original hours on it. Owner is only selling to retire. Call/Email for more information.

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth

Item ID 5358. Austin x703

‘95 John Deere C6 Tree Farmer

2022 TIGERCAT 620H

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

2022 Model Tigercat 620H grapple skidder with 660 original hours, has bogie grapple on it. 35ʺ tires, and Canadian light package, and camera in front on the grill. Skidder is in excellent shape. Call/Email for more information.

well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Item ID 5334. Austin x703

on injection pump. always started good. in good working order. 22in

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘13 KMC 2500 Track

ID 13644. Sam x702

circle saw, 30 foot

1999 Barko 160D - new engine with

TIMBERJACK 208

208 Timberjack for sale, skidder is pretty solid all around, has a couple leaks, but motor fires right up every time. Has new starter, everything else on it works like it should.

“Precision Under Pressure”

Item ID 5320. Austin x703

CAT 538

2020 Cat 538 log loader with 2800 hours on it, still has warranty available. Working daily. Call for more information.

Item ID 5302. Austin x703

TIMBCO 445EXL

Timbco 445Exl with 8500 original hours, in excellent condition. Machine has been well maintained and serviced. Needs nothing, working daily. Call/Email for more information.

Item ID 5293. Austin x703

2016 TAJFUN 400 JOY

2016 Tajfun 400 Joy firewood processor, unit includes log lift, and outfeed conveyer. Machine has been a one owner/one operator unit since new and is in excellent condition. Call/

Email for more information.

Item ID 5227. Austin x703

TIMBERJACK 1270

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

2003 Timberjack 1270 Processor, machine is working daily and is averaging 300 cords a week currently. Owner is only selling to upgrade to a brand new machine. Recent work includes a new ECU, new injectors, new fuel pump, new fuel lines, new wiring harness, new chip, new rear window, all new head cylinders, and pins/bushings, new encoders, and new seal

kits. Head is super tight and has a new measuring wheel, and new rotator. Everything on the machine works as it should and currently has 24000 hours.

‘93 Barko 180B

Item ID 5199. Austin x703

Item ID: 14077

PRENTICE 210B

Contact: Austin Ph: (888) 401-6367 x703

210B Prentice Knuckleboom, comes with reversible csi bucksaw. Works everyday, has joystick control, all new hoses on the boom, brand new grapple as well. Pretty tight and good loader. Only thing it does need is brakes.

Item ID 5085. Austin x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

LIEBHERR A312 WITH RYANS HEAD

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

1998 Model Liebher A312 mobile wheeled excavator with 9300 hours, equipped with newer Ryans saw head attachment. Both in good condition, the excavator has all new hoses, good tires, new lights, and back up camera. The Ryans head has low hours as well.

well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Item ID 4979. Austin x703

13′ BARKO 595ML MAGNUM

2013 Barko 595 Magnum loader has 11000 original hours, equipped with 264 Csi delimber. Recently had two of the pumps rebuilt. Good, solid loader everything on it works as it should. Call/Email for more information.

Item ID 4974. Austin x703

18′ JOHN DEERE 753J

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

2018 John Deere 753J with 6000 original hours. Ready to work, only selling to downsize. Has good undercarriage, and hotsaw head. Call/Email for more information.

Item ID 4968. Austin x703

BELL SUPER T CUTTER

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

Bell Super T 3 wheel machine, has the deutz air cooled engine, with a 30” dangle head. Inside the cab it has levers for controls, and does also have air conditioning. Tires are size 28L and will come with chains as well. Overall in good condition, and ready to work. Call/Email for more information.

Item ID 4952. Austin x703

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny ‘95 John Deere C6 Tree Farmer

‘13 KMC 2500 Track

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/ SOUTHWEST

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

CAT D5H TSK

Cat D5h TSK track Skidder with 3700 original hours, 32” pads, and good undercarriage at around 80%. Ready to work. Call/Email for more information.

“Precision Under Pressure”

Has heat/Ac, every function on the skidder works. Call for more info.

Email info@empirehyd.com

Item ID 4939. Austin x703

643J

2007 643J cutter with 12,700 hrs, thinning saw head, 28LX26 tires, new starter,batteries, alt, gear box rebuilt, motor runs great uses no oil, does have a Hydraulic leak or 2, needs a bushing in one of cylinder arms, also comes with a 843J parts machine, has a tpost saw head,motor and Hydraulics are good 30k for both

Item ID 4907. Austin x703

04′ TIGERCAT 620

2004 Tigercat 620 Tigercat Grapple skidder has brand new engine in it, with less than 10 hours on it, and comes with a year warranty. Machine itself is pretty tight, speed control valve is new, main pumps are fairly new as well.

Item ID 4705 . Austin x703

2009 JOHN DEERE 548G3

2009 John Deere 548G3 with 7700 original frame hours, skidder is tight, and has a new engine in it with less than 400 hours on it. New 28L tires, Everything on the machine works like it should. Call for more info.

Item ID 4699. Austin x703

14′ JOHN DEERE 748H

2014 John Deere 748H model with 15000 frame hours, everything works like it should. Recently had new pins and bushings, and new motor installed just over a year ago. Equipped with sweda axles. Call for more info.

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID 2707. Austin x703

2016 HYPRO 755HB PROCESSOR

Tractor is a 1985 Versatile 276 tractor that has a flex

‘83 John Deere 4850

Item ID: Contact: Ph: (888) 401-6367

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter.

13HP Honda motor. Manual start but electronic option is available.

plate between the engine and pumps, equipped with skid plate under the engine, and some new lights. Engine is a 140HP cummins, and has 3200 hours on it. The Hypro only has 350 hours on it and is in great shape. Call for more information

28Ls – Tire tread: 20% front, 70% back – 5.9 cummins –Winch works – center section is tight – no major slack, dry machine, no leaks

‘93 Barko 180B

Item ID 1369. Robert (606) 875-4783

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Item ID 2593. Austin x703

Contact: J Williams Ph: (888) 401-6367 x701

TIMBCO 425D

Timbco 425D – Year 2001 –Quadco 20 360 degree head – 8.3 Cummins – Hours 7000 / 300 hours on caterpillar undercarriage – new planetary spindle. bearings and one seals in both sides.

Item ID 1429. Austin x703

725B TIMBERPRO

Item ID: 14077

TIGERCAT 822

Item ID 1130. Austin x703

Contact: Austin Ph: (888) 401-6367 x703

460 TIMBERJACK

New Motor, new center pins, and Hyd Pump Cummins = 100hours on the new parts , Tires are at 60%, comes with a spare tire. Text or email for more pictures

Item ID 1124. Marcus (660) 833-9061

‘95 John Deere C6 Tree Farmer

Item ID: 13920

‘13 KMC 2500 Track Skidder

Item ID: 14078

Well Maintained machine, tight and dry work ready with a Rolly II head. make an offer! Call for more pictures.

Item ID 1398. Austin x703

Contact: Austin Ph: (888) 401-6367 x703

’92 TIMBERJACK 450C 10K frame hours – single arch – power-shift trans – tire size

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

1979 TIMBERJACK 230 CABLE SKIDDER

Contact: Austin Ph: (888) 401-6367 x703

1979 Timberjack 230 Cable Skidder. Starts and runs perfect. Excellet condition, Excellent tires. Eaton Winch, Straight Blade. Call for more pictures.

capacity!. Item ID 13421. Sam x702 BARKO

Item ID 1072. Kyle (807) 631-4081

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Tough Meets QUALITY

BANDSAW BLADES

All Sizes Available!

‘16 Halverson H140

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 Brewco Saws - Two

these tires. 4 available. Item ID 13852. Sam x702

FABTEK

2004 Fabtek 546C ForwarderGood running condition. 30.5 tires in front at 60%. 650 tires in back at 60% and come with tracks. Front blade. JD engine. One owner. Double bunk. Item ID 13363. Sam x702 FMC

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

1977 (est) FMC 220CA Tracked Skidder - Good running unit. Detroit 6V53 cranks and runs well.

off onto a conveyor. This is a very well built processor. Item ID 13820.

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals

1977 (est) FMC 220CA Tracked Skidder w/ESCO Swing Boom Grapple - Good running condition. Front blade. Detroit 6V53 engine. No winch....they cannot fit with swing boom grapple. Military style tracks at 70%. Item ID 13227. Sam x702

Austin x703

2012 Refurbished FMC 210 Tracked Skidder - 1976 Model that has been totally refurbished in 2012. No hours since updates were done. Includes warranty on machine and tracks. Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission. Clark 40,000 lb Winch. ROPS Cab. Includes bolt on grapple head with full function. New Paint. Item ID 12731. Sam

170 Skidder - This would be a great starter skidder. It is a single arch with winch. Runs good and pulls good. Detroit 453 turbo and 3 speed power shift transmission. Good center section. There are a few leaks, but nothing major. Item ID 13819. Sam x702 Franklin 3000 - 4BT Cummins engine with approximately 600 hours. Needs tires. Good machine for the money and for a start up company. Item ID 13786. Sam x702 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator;

• PrecIsIon

‘05 Transport Trailers Custom Log Pup

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701 ‘83 John Deere 4850

Item ID: Contact: Ph:

rings for wet weather. Item ID 13851. Sam x702

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

2004 648GIII John Deere duel arch skidder. - Slick Machine. Runs good motor is in top notch condition. Item ID 13610. Sam x702

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

disc. Undercarriage at 75%. 9400 hours. Item ID 13796. Sam x702

well built processor. Item ID 13820. Sam x702

Waratah 624 Super - New Computer for head (Logrite). 10500 hours. New main pump and auxiliary pump. New rebuilt engine with only 300 hours. New drive motors on head for 18'/sec. Almost brand new rails on 90% UC. New front window. Super tight machine. Item ID 13595. Sam x702

a full line of biomass fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and

Best Value Portable Log Splitter

2005 John Deere 903G Feller

Buncher - GN Roy 22’’ continuous saw head. Heated & A/C cab.

Standard boom. Medium pads. Operator, service, and parts books included. Item ID 13203. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Processor - This is a Chomper super 14, with a 60hp engine. In very nice shape. Only 171 hours, comes with green chain conveyer. All of the manuals for the engine, and the chopper itself come with it, as well as all of the electrical schematics. Item ID 13894. Austin x703

motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

2004 John Deere 648GIII - This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily. Item ID 13878. Austin x703

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

2004 John Deere 853G - This track cutter is in excellent condition with new 30” pads, pump, batteries and

2006 JD 2554 Processor with 624

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Waratah ‘Super’ Processing Head. 10500 hours. New pumps. New engine. New drive motors on head. Almost new rails. New front window. Super tight machine. Runs great. One owner!. Item ID 13550. Sam x702

2006 JD 2554 Processor with

2006 John Deere 700J Dozer - This work horse comes with a winch, and new undercarriage, it is tight and dry & running daily with 4500 hours. Item ID 13883. Austin x703

LOGGING EQUIPMENT BANDIT

2006 John Deere 748GIII - 8700 hours, running daily. Item ID 13881. Austin x703

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2006 John Deere 748GIII - This skidder comes equipped with a fire suppression system. Hour meter reads 11000 hours, but is inop now, but had a new engine at 5000 hours. Tires are 30.5 X 32 at 20% and chains on all 4 that are still in good shape. All pins are tight, very little slack in the cradle. Item ID 13930. Sam x702

2006 John Deere Firewood

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

2007 John Deere 160 - Track excavator with a waratah processor. Owner retired. Located in Montana. Item ID 13789. Sam x702

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

2007 John Deere 2554 with 624 Waratah processor - New sprockets, rollers, and chain. 10900 hours on this machine. This machine is in excellent condition. Item ID 13760. Sam x702

2007 John Deere 648GIII - Dual arch with winch and dualing rings. Tires are 30.5’s at 50%. Straight sheet metal, glass is good, and interior is in good shape. This unit has been very well taken care of. 13,500 hours. Item ID 13710. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702 94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

2008 JD 648H w/Swing Boom Grapple - Very clean and unique machine. 6800 hours and well maintained by one owner. Young Swing Boom grapple gives you

1990 Bell Super T -

capacity!. Item ID 13421. Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

Firefighters Face Critical Shortages

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

As millions of acres burn, firefighters say the U.S. Forest Service has left them with critical shortages. The country's wildland firefighting resources are spread thin, more blazes are imminent, and supervisors of local crews are reluctant to allow firefighters to travel far from home to help elsewhere.

Item

Contact:

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

ID 13438. Sam x702

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

In mid-July federal wildfire managers placed the nation under a designation known as Preparedness Level 5bureaucratic code for all hands on deck or, as one veteran wildland firefighter called it, "fire DEFCON."

In layman's terms, Preparedness Level 5 means that the country's wildland firefighting resources are spread thin, more blazes are imminent, and supervisors of

Item ID: 13799

Sam x702

Ph: (888) 401-6367 x701 ‘83 John Deere 4850

Item# 13795

local crews are reluctant to allow them to travel far from home to help elsewhere. This marks only the fourth time in the past two decades that the country has reached such a state so early in the calendar year. So far, more than 5 million acres have burned nationwide, tripling last year's total, and there are still months to go in the fire season.

Contact:

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

LUMBERMEN’S Equipment Digest PO Box 1146

Ph: (888) 401-6367 x703

Columbia, TN 38402-1146

1-800-477-7606 Fax (931) 388-3564 www.lumbermenonline.com

off onto a conveyor. This is a very well built processor. Item ID 13820.

Contact: Sam Ph: (888) 401-6367 x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

2006 Logosol Planer - This is a 10” 4 sided planer that has removable side cutters that will take up to 12” lumber and includes a blower system. Item ID 13428. Sam x702 POLE & POST PEELERS

capacity!. Item ID 13421. Sam x702 BARKO

The U.S. Forest Servicethe largest of the five federal agencies responsible for fighting wildfires, with more than 11,000 firefighters - said that it had reached 101 percent of its hiring goal for 2024. However, firefighters on the ground say that the agency is understating how badly depleted their ranks are.

LOGGING EQUIPMENT

Skidder - Very good running condition. Big Capacity Grapple! 9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders –grapple arch, steering; Replaced hydraulic hoses and lines where needed – fill pump, grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced center pins; Straightened and painted panels; Changed all fluids and filters; Re-insulated cab; Checked and fixed wiring as needed. Item

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

2007 TimberPro 810 Combi Machine - Forwarder set up but comes with rebuilt Log Max 750 processing head. Less than 5200 total hours. Runs very well. Has blade and plumbed for a clam bunk. New swing gear box. Quick attach in 15 min. to switch head to grapple. Cummins 6.7 QSB engine. 260HP. Optional Tracks on all bogies adds $10,000. Item ID 13501. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2010 TimberPro 725B w/Rolly II Processor - Super Clean Machine.

Runs great. Has worked double shifts so it has higher hours at 13,500, but has been well maintained. New U/C last year. 24” grousers. All pumps rebuilt last year. Gull wing engine cover with hydraulic lift for easy maintenance. Rolly II in good condition and computer measures well. Owner retiring. Bought new for $540,000!. Item ID 13362. Sam x702

1999 Bandit 1900 Tracked Disc

2006 TimberPro 830 COMBI

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Harvester/Forwarder - Just 5700 hours. Very good condition. Comes with grapple for loading forwarder and Log Max 7000 processing head for harvesting. 2 sets of tracks for bogies. Set up for quick change from harvester to grapple. One man operation. Log Max head has top saw and runs well. Compare to new machine at $650,000. Item ID 13439. Sam x702

PLANERS

PS8 Post Peeler - This peeler has been converted to electricity over hydraulic. Comes with a operators cab, electric boxes, conveyor and kickers and will peel a 3” post to a 7” post. Comes with a barko loader mounted on a truck that has also been converted to electric power. Item ID 13926. Sam x702 PORTABLE SAWMILL

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

(Continued on page 23)

36” Portable Sawmill - Maximum diameter log- 36” Maximum length of cut-20’6” Powered by a Koehler Diesel 9.8HP Blade-1-1/4” by 13’2” long 12 Volt saw-head precision up/down. Item ID 13897. Austin x703

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

36” Portable Sawmill - Maximum diameter log-36” Maximum length of cut-20’6” Powered by Koehler gas 19HP Blade 1-1/4” by 13’2” long 12 Volt saw-head precision up/down 12 Volt Electrical Forward/Reverse Saw Head Travel. Item ID 13899. Austin x703

Dixon Sawmill - VERY UNIQUE AND EFFECTIVE MILL! Dixon 52 in bottom blade and 38 in top blade. It has a four blade vertical edger diesel powered with a fuel efficient duezt 247hp motor. Item

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

** CALENDAR**

NY STATE WOODSMEN'S FIELD D AYS

Sawmill Worker Hurt When Handrail Collapses

BACKGROUND

An experienced sawmill employee was performing end of the day clean-up duties at his work station on a spring afternoon in the Southeast. The employee’s work station was elevated about nine feet above the ground.

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Fri, 18 August - S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

UNSAFE ACTS AND CONDITIONS

RECOMMENDATIONS FOR CORRECTION

SOUTHWEST FOREST PRODUCTS EXPO

• Never lean on or over handrails or other safety railings.

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

• Conduct daily pre- and post-work maintenance inspections to ensure equipment and safety mechanisms are in good working order and functioning properly.

2ND

GREAT LAKES GGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

The employee was speaking with a co-worker and leaned over the safety handrail to continue their conversation.

PUBLISHER

ACCIDENT

Woods Publishing

ADVERTISING SALES

MID-ATLANTIC LOGGING & BIOMASS EXPO

• While it was important to inform the mill manager of the incident, this should not delay the response of emergency services. Once 911 has been contacted, then the mill manager can be informed of the situation. It’s crucial to remember that in emergencies, every second counts.

MID-ATLANTIC LOGGING & BIOMASS

(Source: Forest Resources Association (FRA), a national advocacy organization representing the entire wood supply chain. Visit them at www.forestresources.org.)

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

When the employee leaned over the safety railing to speak to his co-worker, the handrail broke loose, causing him to fall to the ground.

INJURY

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

The employee landed on both feet after falling from the elevated platform, breaking both ankles. His co-worker provided aid and called the mill manager for further assistance. The mill manager called 911, and the victim was transported to a local hospital for evaluation and surgery.

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

Donna Heninger

EQUIPMENT REPS

‘06 Brewco B1600 Resaw

A post-accident inspection revealed that the safety handrail had been damaged. A cant had recently struck the operator’s cab, moving it about one inch from its original position, breaking the weld and causing the handrail to separate from the cab.

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Item ID: 13862

Contact: Sam Ph: (888) 401-6367 x702

Firefighters....

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

(Continued from page 22)

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

reporting similar issues.

LT300

Item ID: 14031

B & B Mfg

KENTUCKY

Fri, L http://www.kfia.org KentuckyWoodExpo.aspx THE Fri, ww

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This machine

Contact: Austin Ph: (888) 401-6367 x703

John Deere 548G2

Item ID: 14042

Contact: Austin Ph: (888) 401-6367 x703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

According to a dispatcher who works for the Bureau of Land Management, 2,417 nationwide requests for crucial fire resources - everything from radio operators to task force leaders - had gone unfilled through July 26. The requests were delivered to all five federal agencies as well as to state and private organizations.

- 3410 hours. $32,000 in recent upgrades and repairs. Fecon BH250 Mulching Head. Item ID 13502. Sam x702

What was especially alarming, the dispatcher said, was the lack of experienced firefighters: "It tells us we have critical shortages in certain particular middleand upper-level operational qualifications."

A Forest Service wildland firefighter in Oregon said, "We're not able to fill any crews." Firefighters in California are

©2017 Woods Publishing

2011 Tigercat 620D - This is a low hour skidder with only 5500 hours on a cummins engine and a fire suppression system. Comes mounted on 35.5 tires at 50% back and 40% front and good chains on all 4 tires. Has the bigger 630 axles and no winch. Center pins are tight and extra fuel tank. Item ID 13929. Sam x702

According to interagency data obtained by ProPublica, 90 of the approximately 270 Forest Service fire engines in the state were unavailable for service on Aug. 12; firefighters say this number is unusually high. On the same day, according to the data, at least a third of the statewide Hotshot crews - elite teams that fight large wilderness fires - were not staffed sufficiently to operate as intended.

Item ID: 13838

Contact: Sam (888) 401-6367 Ext. 603

In March, ProPublica reported that the nation's wildland firefighting force was experiencing an exodus, especially among its most highly qualified firefighters. In the past three years, the Forest Service lost 45 percent of its permanent employees, forcing it to fill its ranks with inexperienced firefighters.

Item ID 13408. Sam x702

2014 Tigercat 630D Grapple Skidder - Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702

2015 Tigercat 234B Loader - Model 234B. Only 300 hours on this

roatation on the grapple w/ a 30’ reach on the boom. Joystick

2006 Tigercat 630C Grapple Skidder - Very good running

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

7308

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2015 CATERPILLAR 525D GRAPPLE SKIDDER Item ID: 7054

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2005 BELL ULTRA C FELLER BUNCHER Item ID: 7092

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 1998 CAT 320B DELIMBER Item ID: 7337

Contact: AUSTIN

Email: Austin@lumbermensco.com

2015 INTERNATIONAL 5100 BOOM PICKER TRUCK Item ID: 7070

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2019 PRENTICE 2384D LOG LOADER Item ID: 7292

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 QUADCO 24C SAWHEAD Item ID: 7065

2021 WOODMIZER LT-70 SUPER WIDE SAWMILL Item ID: 7320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

Contact: Austin Ph: (888) 401-6367 x703

BAKER 3674CD PORTABLE BAND SAWMILL COMPLETE OPERATION Item ID: 7259

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact:

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

‘05 Gehl CTL

Item ID: Contact: Ph:

70

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

capacity!. Item ID 13421. Sam x702 BARKO

Contact: LYNNE FOR

INFORMATION Phone: 314-621-7711

Ph: (888) 401-6367 x703

Contact: LYNNE FOR

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

EXT 709 (C) 801-362-2170

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

JD 550G LT Item ID: 3686

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

1996 TIMBERJACK 380C Item ID: 4825

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 98′ JOHN DEERE 640G Item ID: 2694

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TIMBERJACK 208

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

86′ TIMBERJACK 230A Item ID: 3605

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 INT'L CABLE SKIDDER Item ID: 5568

JOHN DEERE 540D Item ID: 5249

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

90′ TIMBERJACK 240A

Item ID: 5082

Contact: AUSTIN

a

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

machine, with air strain conveyers that go

Contact: AUSTIN

and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 FMC 210 Item ID: 5526

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5403

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170 98′ JOHN DEERE 640E Item ID: 2701

JOHN DEERE 440C

Item ID: 5242

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 208

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

PRENTICE 210B Item ID: 5085

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 643J Item ID: 4907

‘83 John Deere 4850

Item ID: 14073

TIMBERJACK 1270 Item ID: 5199

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 BELL SUPER T CUTTER Item ID: 4952

‘05 Gehl CTL 70

Item ID: Contact: Ph:

2016 TAJFUN 400 JOY Item ID: 5227

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

‘16 Halverson H140

Item ID: JW-909632

2022 TIGERCAT 620H Item ID: 5334

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078

13′ BARKO 595ML MAGNUM Item ID: 4974

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

LIEBHERR A312 WITH RYANS HEAD Item ID: 4979

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

EQUIPMENT Item ID: 5368

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 1010

Item ID: 5358

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 538 Item ID: 5302

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

04′ TIGERCAT 620 Item ID: 4705

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 18′ JOHN DEERE 753J Item ID: 4968

Contact: AUSTIN

Email: Austin@lumbermensco.com

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

TIMBCO 445EXL Item ID: 5293

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT D5H TSK Item ID: 4939

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘95 John Deere C6

that Started it All!

2009 JOHN DEERE 548G3 Item ID: 4699

725B TIMBERPRO Item ID: 1398

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AD SUBMISSIONS

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOADER EXCAVATOR 225 LC Item ID: 1067

Contact: MOSE Phone: 208-290-1888

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 450C Item ID: 1369

Contact: ROBERT Phone: 606-875-4783

May be sent tomorris@lumbermens.co

Contact: JOE

POSTMASTER

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 16′ JD 700K Item ID: 4343

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Email: Joe@lumbermensco.com

Contact: KYLE Phone: 807-631-4081 1979 TIMBERJACK 230 CABLE SKIDDER Item ID: 1072

JOHN DEERE 550G CRAWLER DOZER Item ID: 5388

Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

06′ JD 700J LGP Item ID: 3787

Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker available. Buyer pays for trucking, About 80mi south of Louisville, KY

Contact: JOE

Email: Joe@lumbermensco.com

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent.

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 748H Item ID: 2707

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 648D Item ID: 547

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

04′ JD 450H Item ID: 4327

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

TIMBER JACK 450B GRAPPLE SKIDDER Item ID: 5452

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

98′ TJ 460 Item ID: 4918

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘83 John Deere 4850

Item ID: 14073

03′ JOHN DEERE 648G III SKIDDER Item ID: 5647

Contact: JOE

JOHN DEERE 848L Item ID: 1184

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID: Contact: Ph:

Contact: Austin Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Contact: JOE

‘16 Halverson H140

Item ID: JW-909632

Contact: JOE

2010 Shop Built Wood Processor

Email: Joe@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 90′ JD 550G Item ID: 3873

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 450B Item ID: 5098

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 JD 648L Item ID: 5073

Contact: J Williams Ph: (888) 401-6367 x701

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 12′ JD 648H Item ID: 5253

Item ID: 14078

15′ TIGERCAT 610E Item ID: 4944

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

14′ TIGERCAT 720E Item ID: 1617

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

02′ CASE 650H

Item ID: 3511

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

John Deere

JOHN DEERE 643K Item ID: 1531

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170 92′ CAT D5H Item ID: 4678

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Sam x702

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702 BELL

JOHN DEERE 753J Item ID: 1582

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 460D Item ID: 3286

Email: Joe@lumbermensco.com

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ CAT 525B Item ID: 3214

2013 JOHN DEERE 848H Item ID: 2646 98′ CAT 515 Item ID: 4671

Email: Joe@lumbermensco.com

2004 JOHN DEERE 648G3 Item ID: 2628

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

06′ TIGERCAT 635C Item ID: 3322

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

15′ CAT 525D Item ID: 3172

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

04′ TIMBERJACK 460D Item ID: 2724

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JOHN DEERE 648G3 Item ID: 2791

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CLARK F666 RANGER Item ID: 3233

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

00′ JD 748G III

Item ID: 3210

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

02′ TJ 660D Item ID: 4088

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

12′ TIGERCAT 620D Item ID: 2753

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

83′ TJ 380A Item ID: 2133

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C

Item ID: 2117

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124 Adams

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 515 Item ID: 1739

04′ JD 435 II Item ID: 4169

Contact: JOE

Email: Austin@lumbermensco.com

‘83 John Deere 4850

Item ID: 14073

15′ CAT 559C LOADER Item ID: 5534

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID: Contact: Ph:

Contact: JOE

Contact: Austin Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

TIMBERJACK 240A GRAPPLE SKIDDER Item ID: 1769

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 17′ JD 437E Item ID: 4809

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Contact: AUSTIN

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140

Item ID: JW-909632

08′ JD 535 SERIES II Item ID: 4580

Contact: J Williams Ph: (888) 401-6367 x701

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

10′ JOHN DEERE 648H Item ID: 1847

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track

Contact: Austin Ph: (888) 401-6367 x703

Contact: ERVIN Phone: (641) 229-1012 CAT 515 Item ID: 1509

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

TIMBERJACK 460 Item ID: 1777

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

capacity!. Item ID 13421.

04′ TIMBERJACK 460D Item ID: 5445

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

00′ TIGERCAT 245 Item ID: 4685

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 TIGERCAT 630E Item ID: 1098

13′ TIGERCAT 234 Item ID: 4803

Contact: JOE

Email: Austin@lumbermensco.com

Email: Joe@lumbermensco.com

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Runs Great!. Item ID

95′ PRENTICE 210E

Item ID: 3628

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Sam x702 BARKO

John Deere C6

98′ PRENTICE 280 Item ID: 2166

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

840.4 Item ID: 1222

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

DEERE 1010D Item ID: 1715

Contact: JAKE Phone: (440) 537-5124

Contact: AUSTIN

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2014 PONSSE SCORPION KING Item ID: 4914

840.2 FORWARDER Item ID: 741

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 KOBELCO 250 LOG LOADER Item ID: 2584

Low hours

Email: Austin@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 VALMET 644 Item ID: 1480

Contact: AUSTIN Email: Austin@lumbermensco.com

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

DEERE 437D Item ID: 2740 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

DEERE 1270 Item ID: 1350

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48"

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

WOODMIZER

Item ID: 14073

SUPER Item ID: 5519

Contact: Austin

Contact: AUSTIN

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID:

Contact:

Ph: (888) 401-6367 x701

Item ID: 5641

Contact: AUSTIN

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Ph: (888) 401-6367 x703 ‘93 Barko

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS

WIDE Item ID: 5549

Contact: AUSTIN

‘16 Halverson H140

Item ID: JW-909632

(888) 401-6367

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

WOODMIZER LT-40HD Item ID: 5632

Contact: AUSTIN

Email: Austin@lumbermensco.com

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 08′ JD 843J Item ID: 2109

Contact: JOE

Email: Joe@lumbermensco.com

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 05′ HYDRO-AX 721E Item ID: 3644

Email: Joe@lumbermensco.com

2046

capacity!. Item ID 13421. Sam x702 BARKO

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

TIMBERKING B20 SAWMILL Item ID: 5559

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

Item ID: 1200

Contact: AUSTIN

Email: Austin@lumbermensco.com

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

Item ID: 5007

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

WOODMIZER LT 300 Item ID: 4549

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

90’S MELLOTT DEBARKER Item ID: 3329

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

19′ MORGAN MILITARY NOTCHING BAND SAW Item ID: 3567

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

POST PROCESSING Item ID: 1231

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

WOODMIZER Item ID: 2419

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

SIZER Item ID: 1322

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

TIMBERKING 2000 Item ID: 5508

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

B20 SAWMILL Item ID: 5559

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5540

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

5274

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID: 14073

Contact: JOE

AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID: Contact: Ph:

MACK TRUCK WITH HOOD LOADER Item ID: 1089

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

568

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID:

Contact: AUSTIN

Contact: Austin Ph: (888) 401-6367 x703 ‘13 KMC

2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: Austin Ph: (888) 401-6367 x703 ‘93 Barko 180B

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 01′ MACK RD688 Item ID: 4479

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: SAM Email: Sam@lumbermensco.com

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

FOR SALE Item ID: 5413

Contact: AUSTIN

Email: Austin@lumbermensco.com

‘95 John Deere C6

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 NYLE FIREWOOD DRY KILN Item ID: 3588

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 WARRATAH FS20 Item ID: 2100

Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Value! PA. Item ID 12062.

AD DIRECTORY

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

20,000lb goose neck trailer. Item ID

Sam x702