November 2013
Since 1986 - The Original (800) 315-9950 or (615) 349-1890
Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment
DealS of the Month '04 JD 700H LGP
Item ID: 13035 Contact: Chris ext. 600
BANDIT CHIPPERS WILL INCREASE THE QUALITY
OF YOUR CHIPS.
NEW SCREENING SYSTEM!
‘08 Dynamic 585 Cone Head Chipper
Item ID: 12694 Contact: Tom ext. 604
John Deere 648G III
AVAILABLE WITH
BECAUSE SIZE & QUALITY MATTER.
w screening system and microchip drum Available with ne ! Item ID: 13009 Contact: Keaton ext. 606
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
Beast® Horizontal Grinders
Track Carriers
The demand for biomass energy is growing. Size and quality are important to the power plants. Bandit whole tree chippers are known for producing high quality chips. Bandit chippers can produce a microchip 1/4”, 3/4” standard or 1-1/2” maxichip. Our unique card breakers remove oversized pieces, providing you with the exact chip you need, every time. Combined with Bandit’s legendary ruggedness and unstoppable production, it’s no surprise these machiens are #1 in the woods.
So let Bandit take you to the top of the biomass market: call your local Bandit representative to schedule a demonstration today!
Whole Tree Chippers
Tracy Gordon owner of Gordon LumTracy owner of Gordon LumberingGordon purchased a Log Max 7000XT. bering purchased Log Maxabout 7000XT. We asked Tracy hisathoughts We asked Tracy about his new Log Max:his “I thoughts am looking for
Tracy Gordon owner of Gordon Lum-
his new Log Max:that “I am looking for reason is one
savings and bering purchased a fuel Log Max 7000XT.
fuel is one We asked Tracy his thoughts about and that why savings I, absolutely, wanted a reason Log Max his new Log Max: “I am looking for why I, absolutely,
a Log Max head. I looked atwanted a Log Max 6000 head. I looked at a LogaMax but needed something little6000 bigger
fuel savings and that is one reason
why I, absolutely, wanted a Log Max
but needed little bigger head. I looked at a which Log Max is6000 why something I chose thea7000XT. This but needed something a little which is bigger why I
chose thefor 7000XT. head is a good match mixedThis and head a good match forarea. mixed and heavyishardwoods in our Every-
which is why I chose the 7000XT. This
head is a good match for mixed and
heavy hardwoods in our area. smoothly and I Everywas
hasEverygone heavy hardwoods inthing our area.
W
thing has gone thing has gone smoothly and I well was treated by
smoothly and I was everyone involved.” Western Canada treated well by everyone involved.” Toll Free 1.800.666.4474 From right to left, Dane Caton, operator, Tracy Gordon, treated well by everyone involved.”
From right to left, Dane Caton, operator, Tracy Gordon, owner, and Baker, salesman, of Strong, From right to Gary left, Dane operator, Tracy Maine. Gordon, owner, and Gary Baker, salesman, ofCaton, Strong, Maine.
learn more To learn more aboutTo what Log Max owner,Scan and Gary Baker, salesman, of Strong, Maine. Scan this QR code withthis QR code with your smartphone your smartphone barcode reader Scan app to this QR code with barcode reader app to see a video on ayour Log smartphone see Max 7000XT Fixed a video on a Log barcode reader app to Head processing hard-7000XT Fixed Max see a processing video on a Log woods on a Timber Pro Head hard725 Track Machine Max 7000XT Fixed
woods on a Timber Pro Head processing hard725 Track Machine woods on a Timber Pro 725 Track Machine
USA
The Original Lumberman’s Exchange
P P
about what Log Max Ph. 360.699.7300 To learn more what Log Max can do for you contact your can dolocal for youabout contact your local Eastern Canada dealer today.
Ph.your 506.869.2325 can dotoday. for you contact local dealer dealer today. www.LogMax.com
www.LogMax.com 2 n
TollW Toll
E EP
P
www. www.
Visit us online at www.LBXonline.com!
PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957! New Design! New Technology!
Portable Yard Saw
Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature
Traveling Arch Saw
Hydraulically controlled No manual cutting Our most popular turn key system
The New L-M “I-CUT” Bundle cross cut system!
* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!
L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled
Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap
Flush End Bump Rollcase
Reduce or eliminate your end trims
The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!
Visit our web site www.LMSaws.com to see our complete product line and videos!
L-M Equipment Co. Ltd
Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950
November 2013 n 3
E V SUA P TO
$
3,OOO
*
LINE R GO ON CALL O AILS
T FOR DE
MAKE IT HAPPEN T BUTIL HE IN
USA T BUTIL HE IN
USA
At Wood-Mizer, employee-owned and built in the USA, we take a responsible approach to business and how we treat our customers. That’s why our mills are hand built one-by-one, why our customers believe there isn’t a better sawmill on the market, and why our promise of excellent service and quality products is unsurpassed. You can make it happen. We got your back.
© 2013 Wood-Mizer LLC *Price subject to change without notice. © 2013 Wood-Mizer LLC
800.553.0182 | woodmizer.com 800.553.0182 | woodmizer.com
*Price subject to change without notice.
4 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
The
Original
Lumberman’s Exchange Your #1 Source for Forest Industry Products! The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants. Publisher Woods Publishing Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com Design Director Heninger & Associates lbxonline@comcast.net Equipment Reps Equipment Representative Tom Hirt (800) 315-9950 x604 Equipment Representative James Keaton Woods (800) 315-9950 x606 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. ©2013 by Woods Publishing.
For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com BAGGER Real Tuff Baler, Forage box & Conveyor - 2011 Real Tuff Baler powered by a 36-hp Yenmar with conveyor. Up to 60 square bales an hour! Is in mint condition! - Item ID-12795 - Chris 800-315-9950 x600
BANDMILLS & HEADSAWS
Morgan 4 head trim saw - Morgan 4 head Resaw, 3
phase 480V, belt driven, running daily. - Item ID-12553 - Keaton 800-315-9950 x606
BLOWERS
Phelps Dust blower - Phelps Dust blower - Item ID-12588 Keaton 800-315-9950 x606
CARRIAGES & DRIVES
Manual Four Head Block - Manual Four Head Block Mounted on all steel carriage. Husk. Manual Pulleys on Bearing . Parts Book and where to order included. - Item ID-12846 Tom 800-315-9950 x604
CHIPPERS
** Auctions **
James G. Murphy — Page 8
www.murphyauction.com
Juniper Wood Products Mill Equipment Located in Klamath Falls, OR Equipment Preview 8 a.m. - 9 p.m. Nov. 12–14, or by appt. Bids Due By Friday, January 3, 2014 Follow Us On Twitter @lbxonline Coming Soon: Facebook page and blog
** INFO LINK **
ACE IHM Enterprises.................. 9
Kilgore Saw................................ 31
AJD Forest Products................. 10
Lignomat.................................... 31
Amark........................................... 9
LM Equipment, Canada.............. 3
B & B Mfg................................... 24
LogMax......................................... 2
B. H. Payne................................. 13
M&F Gauge................................. 33
Baker...................................... 6, 17
Menominee Saw........................ 23
Bandit Industries........................ 1
Metal Detectors, Inc................. 36
Bartlett Saw Service................. 26
Midwest Sharpening Service... 18
Bay Equipment.......................... 32
Multitek...................................... 14
Brewer Eagle.............................. 35
Phase-A-Matic............................ 27
Buck Equipment (AIM) . .......... 16
Piper’s Saw Shop....................... 15
Concept Products..................... 29
Precision Sharpening............... 20
Cord Master............................... 12
Press Releases........................ 39
Corley Mfg.................................. 34
Renno Bros. Lumber................... 5
CRD Metalworks........................ 11
Resource Recovery................... 28
Dyna Products........................... 19
Rotochopper............................. 40
Graf Bros. Flooring...................... 9
Row Electric.............................. 22
Hahn Machinery.......................... 7
Sawmill Exchange..................... 27
James G. Murphy..................... 8
Sering Sawmill........................... 37
Kasco-SharpTech...................... 16
Wood-Mizer............................ 4, 21
For Classifieds Call Your LBX REP at 1-800-315-9950
Precision 58 Chip Pac Precision 58 Chip Pac, single chute loading system, - Item ID-12764 - Keaton 800-3159950 x606
COMPLETE SAWMILLS
Forest-All Mill - Forest-All Sawmill, circle saw - Item ID12762 - Keaton 800-315-9950 x606 Sanborn 636 - 1993 Sanborn Min Max 636. 50-hp. It also has a remote air conditioned operator booth - Item ID12761 - Keaton 800-315-9950 x606
FIREWOOD PROCESSORS
2011 MODEL 1620 Multitek SS FIREWOOD PROCESSOR - Production Rating: 2.0 3.0, Engine: 44 hp Diesel, Max Log Length: 20’ Max Log Diameter: 18/16” Performance: Production Rating: 2.5 + Full Cords per
Motivated Seller Wants Offers • 18” x 17’ Belt Conveyor, no drive..................$750 • Phelps 36” Chip Loader, no drive included..........$850 • MKC Model 40-knife Grinder, Recon.......$3800 • Mellot No. 7 Log Turner, w/valve and hydro power pack w/motor.......$6,500 • Crosby 8x48” Combo Gang Edger, lots of 26” strob saws, lots of miscellaneous spacers, infeed/outfeed tables, no motor................$10,500 • Frick 01, 5 H.B. Sawmill Carr, air dogs, Tappers, Kant Flippers Edmiston Hydro setworks w/ 5 sets, 55 ft. of rail track and ways, end of track bumpers, 50hp feedworks saw husk with 3” x 8’ Mandrel 36” pulley on Mandrel w/ V belts........... .... Take all for: $25,000
Fax Inquiries to
(717) 463-3624 or
Call & Leave Message
(717) 463-9100
November 2013 n 5
Zip
❑ Please Remove
State
❑ Please Change
free equipment listings! Call – (800) 315-9950
'96 548G John Deere Skidder
One of the All-Time Greats!
st The Mo Band r a l u p o P in the Resaw ld! Wor info@bakerproducts.net Call: (800) 548-6914 www.logtolumber.com
City
Item ID: 12864 Contact: Chris ext. 600
‘88 405 Franklin Grapple Skidder
Item ID: 12953 Contact: Chris x600
Phone
✁
P.O. Box 1916 Columbia, TN 38402
*Company name and address required to process your change.
Address
Individual Name
Chris Woods, Owner Phone: 800-315-9950 Ext. 600
The Original Lumberman’s Exchange
Company Name*
❑ Please Add
Call us today for all your used equipment needs!
DealS for the Month -October-
The Model “A” Baker Band Resaw:
Your Log To Lumber Leader
If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: 6 n
Equipment Representatives
‘03 Prentice 490 Grapple Skidder
Tom Hirt Phone: 800-315-9950 Ext. 604
Extra Tires, Low Price Item ID: 12979 Contact: Tom ext. 604
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
James Keaton Woods Phone: 800-315-9950 Ext. 606
The Original Lumberman’s Exchange
Hour (128 cubic feet per cord), Maximum Log Length 20’ long logs Maximum Log Diameter 18, Recommended
Log Diamter Capacity 16”, Minimum Log Diameter 3, Specifications: Engine Horsepower: 44 hp (33 KW) Kubota diesel engine, Hydraulically adjustable wedge 4, 6, or 8-way, Operator joystick controls, Splitter Tonnage: 22 tons, Splitter Cycle Time: 4.5 seconds, Transport Length: 24’, Transport Width:6’5”, Transport Weight: 6,400 lbs, Operating Width: 10’6”, Trailer Hitch Type: 2+5/16” ball or Euro Tow Ring, Standard 3-strand hydraulic live deck, Hydraulic 40” insert tooth carbide tipped circular saw‚ Hydraulic Chain Log Infeed Processor Options: 6-way interchangeable wedge‚ 4-way interchangeable wedge, 8-way interchangeable wedge, Operator seat‚ 20‚ 30‚ or 35’ conveyor Prenium 15’ integrated folding conveyor system, Night light processing kit, CE Mark for European Union Economic Area A little less than 375 hrs 90 day warranty - Item ID-12934 - Chris 800-315-9950 x600 Best Value Portable Log Splitter - Small manufacturer in PA has made the best
Visit us online at www.LBXonline.com!
Introducing the New HFP150 Compact Firewood Processor
Hahn HFP150 Firewood Pro
Hahn Machinery Inc, P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com
HGP150 Firewood Processor
T
he HFP150 is the latest addition to the Hahn line of firewood processing attachments for skid steer loaders and compact track and wheel loaders. When attached to a properly equipped loader, the HFP150 Compact Firewood Pro can pick up a 6' to 10' log, cut it into firewood blocks, and split those blocks into 2, 4, or 6 pieces. All functions are performed by one person seated in the loader's cab—resulting in greater safety, improved productivity, and making cutting and splitting firewood a whole lot easier. The HFP150 Compact Firewood Pro is: • An affordable alternative for the person looking for a faster, easier, more efficient, and safer method of putting up firewood—but doesn't require the production capacity you get with the larger Hahn HFP160 commercial unit. • A smaller, lighter, simpler machine that runs well on most mid-sized skid loaders in the 45hp to 50hp range—with hydraulic flows of 15 gallons per minute.
A unique "Shuttle Trough" system carries the log up to the splitting wedge
The high speed chainsaw cuts a firewood block 12" to 20" long
For more information on the— HFP150 Firewood Pro
1-800-483-8825 for complete details on this or any Hahn firewood processor or forestry equipment call or email info@hahnmachinery.com For Classifieds Call Your LBX REP at 1-800-315-9950
As the splitting cylinder pushes the block through the wedge, the Shuttle trough is advancing the log for another cut
November 2013 n 7
ENTIRETY SALE NO MINIMUMS - NO RESERVES
One of
JUNIPER WOOD PRODUCTS Mill Equipment Located at: 2350 Maywood Drive, Klamath Falls, OR 97601
2008 MORBARK C40 Rosserhead debarker, s/n: 770 L&M 9300 6’ insert tooth whole log cut off saw(installed in 2008) HURDLE HEAVY WEIGHT portable automatic sawmill (installed in 2005) Custom built 40” 2-saw scragg w/end dogging carriage BAKER BBR-0 horizontal band resaw, s/n: 02-3204 JEFFREY 34WBSS hammermill (installed in 2008) PRECISION 58.15-6K chipper WSM 48HD 2-deck chip screen WSM FSUB 20/21, 20”x21’ balanced vibratory conveyor, s/n: 57503 AMERICAN FAB approx. 30-unit bark bin (installed in 2008) Approx. 24-unit chip bin Approx. 14-unit shavings bin CAROTHERS CSL49BR10BEI filter baghouse B&R SHEET METAL 50RBLD blower B&R SHEET METAL 35CWHB blower (2) B&R SHEET METAL 16 air locks Custom built 4’x16’ rotary bark trommel 2003 MORBARK 2000 STAC TRACK rail mounted self-contained timber stacker s/n: 250-042 MATTISON 4-head moulder
Custom built planer/sander line WULFTEC WLF200 stretch wrapper, s/n: 0699-4639 21’ 5-strand H78 debarker infeed deck 16’ 3-strand auto sawmill infeed log transfer Approx. 40’ 2-strand scragg mill infeed log transfer 16’ 2-strand H78 re-entry log transfer 75’ H84XHD sorting log haul w/2-arm rotary log kickers, 24” x approx. 110’ covered troughing roll chevron belt (installed in 2008) 24” x approx. 82’ troughing roll belt w/drive (installed in 2008) 18” x approx. 68’ troughing roll belt w/drive (installed in 2008) 24” x approx. 28’ troughing roll belt w/drive (installed in 2008) PATZ 400 42’ long link w/flites material mover PATZ 400 24’ material mover PATZ 400 16’ material mover ALLEN BRADLEY CENTERLINE 2100 MCC (installed in 2008) ALLEN BRADLEY CENTERLINE 2100 MCC SAFTRONICS EZ6-180, 200 hp reduced voltage soft start SAFTRONICS EZ6-180, 150 hp reduced voltage soft start KOYO DIRECT LOGIC 205 PLC Large assortment transfers & conveyors
Equipment Preview 8am - 4pm November 12, 13, 14, or by appointment Interested bidders must fill out a Bidders Form, available at murphyauction.com. All bids must be submitted by the close of business Friday, January 3, 2014. Qualified Bidders will be invited to participate in further bidding on January 15, 2014
TERMS & CONDITIONS The mill equipment is being sold in its entirety, as 1 lot. Mill can be sold to operate on-site. Appointments to preview can be made through the James G. Murphy Company by calling 503-463-4444, or emailing tifni@murphyauction.com. For further information please contact Bob Jones at 503-730-1564 or Andy Taylor at 503-705-8579. A Buyer’s Premium of 7% will be charged to the buyer. All sales are subject to owner’s approval. If reasonable offers are not received, Owner reserves the right to sell the items at a later date. WARRANTY DISCLAIMER: ALL SALES ARE FINAL. All items are being sold “As Is, Where Is”, with all faults and without any warranties as to merchantability of fitness for a particular purpose. The principal, the auctioneer, the advertising coordinator, and/or any of their agents make no express or implied warranties of any type. Due to safety and insurance reasons, persons under 12 not admitted. Photos & Bidder Forms are available online at murphyauction.com
For additional descriptions and photos log onto murphyauction.com
James G. Murphy Co.
Commercial & Industrial Auctioneers 8 n
The Original Lumberman’s Exchange
1.800.426.3008 - 425.486.1246
murphyauction.com Visit us online at www.LBXonline.com!
Now Accepting Visa & Mastercard
Save Your Stubs & Pieces!
➨
Let us reprocess them $30 per 100 Now have Factory Seconds $27 per 100 sticks
valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800315-9950 x604 Chomper Firewood Processor - 60HP John Deere engine. Two chain hydraulic powered conveyor. Very good running condition. Can produce up to 2 cords/hour according to owner. Priced to sell. - Item ID-12792 - Tom 800-315-9950 x604
FORKLIFTS
1999 Caterpillar TH63 Telehandler - SN: 5WM02702; Hours: 2,800; Self Leveling; 4 way/crab steer; Light Kit; 42’ Reach; 1.75 yard bucket; Forks; Good Rubber; Great for stacking lumber or pallets. Perfect for utility
New Price!
‘98 Peterbilt 357 • C12 engine, 18-speed transmission, Full lockers, 7000 Cerco Loader, with Pup trailer. ......... Asking $60,000
Contact Steve (563) 580-0383
WI
work with optional bucket that is included. - Item ID12667 - Tom 800-315-9950 x604 2003 Manitou 523 - 2003 Manitou 523, 1532 hours, 23ft reach, A/C, Grapple Bucket - Item ID-12604 - Keaton 800315-9950 x606 Hyster 70 XL2 Forklift Hyster 70 XL2 Forklift,
48” Heavy-Duty Corley Slant Log Carriage..... $30,000
Call Graf Brothers Flooring, Inc. (606) 932-3117 www.grafbro.com Propane, 2199 hours - Item ID-12607 - Keaton 800-3159950 x606 Late 80’s Case W20C Wheel loader - Late 80’s Case W20C Wheel loader - Item ID-12606 - Keaton 800-315-9950 x606
HOGS/WOODGRINDERS
Falcon Wood Hog Grinder Falcon Wood Hog Grinder,
For Classifieds Call Your LBX REP at 1-800-315-9950
‘98 Peterbilt 378
• N-14, cummins, 18spd, engine brake, air ride suspension, aluminum wheels, tandem axle, full locker, full gauge panel, loaded 7000 Serco log loader... ......... Asking $55,000
Contact Steve (563) 580-0383
WI
36x60, powered by a 3406 Cat. - Item ID-12920 - Keaton 800-315-9950 x606 Jeffrey Hog - Jeffrey Hammer Hog, 200-hp grinder. - Item ID12925 - Keaton 800-315-9950 x606 West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft November 2013 n 9
AJD Forest Products
Premium Kiln Dried Hardwoods Northern Red Oak is Our Specialty Lake States Largest Producer of Industrial Lumber P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500 Email: fred@ajdforestproducts.com • Web: www.ajdforestproducts.com
Dry Kilns • 2 Sawmills • 25,000,000 BF Annual Production
REduced
John Deere 548G Skidder is in great working condition and working daily Motor recently rebuilt with approx 200 hours. • Has new hydaulic pump • New turbo • Rear end recently gone through • Grapple cylinders recently packed • New glass
‘05 Tigercat 630C Grapple Skidder (Great Cond) Item ID: 12831 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
• New rear tires • Good winch • Heat/ac works • Everything works except radio
Item ID: 12864 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Keaton 800-3159950 x606
Logging Equipment
1976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; 10 n
Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well. Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton trailer. - Item ID-12249 - Tom 800-315-9950 x604 1976 FMC 200BG Tracked Grapple Skidder - 1976 FMC 200 BMG (BG5186). V671 Detroit Engine. Runs OK. Could use some undercarriage work. Great for swamp or wet land logging. Single Arch Grapple. Front blade. Hours show 479, but meter is broken. - Item ID-12775 - Tom 800-315-9950 x604 1978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs
The Original Lumberman’s Exchange
‘96 Timberjack 450C Grapple Skidder Item ID: 12769 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
good. - Item ID-12325 - Tom 800-315-9950 x604 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Bodygood, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 Tom 800-315-9950 x604 1981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 Keaton 800-315-9950 x606 1981 Hydro Ax 411B w/ Koehring 16” Hot Saw Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and
runs well. Very nice machine for the price. - Item ID-12538 Tom 800-315-9950 x604 1983 Caterpillar 988B Loader with very low hours - 1983 Caterpillar 988B Loader, Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID12375 - Keaton 800-315-9950 x606 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-3159950 x604 1985 IH Dresser TD-12 Dozer - 1985 IH Dresser TD-12 Dozer - Hour meter reads 316.7. Screened OROPS. 50,000 lb. Hyster free spool winch with Arch and Heavy duty Mann brush rake. 6-way blade. 22” pads. Undercarriage 90%, track 70%. This dozer is in exceptional condition for its age. One small dent in breather cap, but otherwise excellent. Seat is very good. Engine and tranny are strong and responsive as are the hydraulics. No visible leaks anywhere. New starter. All compartments and doors are lockable. Weight = 30,000 lbs.
Visit us online at www.LBXonline.com!
There's Only One Way to Make Money in the Firewood Business…Production!
There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business…. Production! The Results are in YOur from the Great Firewood Shootout… Our VisiOn FOr success is 20/20
Our Rapido Loco and shootout... Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition! DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in
Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 24' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting • 20" Log DiameterSystem Capacity • Push-button Splitting System
At $54,900 Ready To Produce, At this is$54,900 the Fastest Ready to Produce, this is Production Firewood The Fastest Production Processor in North Firewood Processor in America.* North America.*
Woodbine Pro 20 Woodbine Pro 20 Features
- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power! • Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power! At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*
remember HindsigHt is 20/20
Remember: Hindsight is 20/20
sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere. 20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the
*As Seen In Sawmill & Woodlot Magazine
Family Owned – Family Operated – Factory Direct
Family Owned—Family Operated—Factory Direct
Call 888-667-8580
Sawmill & Woodlot www.crdmetalworks.com
For Classifieds Call Your LBX REP at 1-800-315-9950
*As seen in
magazine.
November 2013 n 11
n uctio e d o r anc est P High t Mainten !! s d! Lowe rantee Gua
Trailer:
Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.
Saw:
Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.
Engine:
50 to170 HP or PTO Drive with user’s tractor.
Hydraulics:
Commercial Shearing
Splitter:
35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.
Infeed Conveyor:
16” - 30” long Hydraulic powered.
Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.
New Grapple System Now Available!
2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada
www.cord-master.com Email: cordking@cord-master.com
Today!
888-219-9663 12 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
REduced
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off
‘04 Franklin Q80 Single Arch Grapple Skidder w/Winch
Item ID: 12843 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com Woods ready machine. This dozer rates a strong 9 out of 10 and ready to go to work for you today! - Item ID-13026 - Tom 800-315-9950 x604 1987 Cat D4H Grapple Dozer Good running Hi Track dozer with 6500 hours and wide flotation tracks. Esco grapple with 84” opening. Winch. 6 way blade works well. Just replaced rear idler. Hard to find machine. Real work horse! - Item ID-12623 - Tom 800-315-9950 x604 1987 Franklin Swamp Cable Skidder - SR# 13280; Purchased New in April 25, 1987; Hour Meter 8200hrs. Detroit 4-53 Engine: 67x34.00x26 Tires (60% Rubber); Needs Seat, Starter, Batters, Top Drive Line Repaired, and two Side Covers. Includes parts manual. - Item ID-12847 - Tom 800-315-9950 x604 1987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins
‘00 GMC 8500 Log Truck w/Ldr. Item ID: 12893 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
KTTA 750 HP engine -- needs repower - Item ID-12443 Keaton 800-315-9950 x606 1988 405 Franklin grapple Skidder - 1988 405 Franklin grapple Skidder. it has 900 hours one new transmission, I have a set of tire chains and transmission filters and a couple extra u joints that will go with it. - Item ID-12953 Keaton 800-315-9950 x606 1989 Cat 518G Grapple Skidder - 1989 Cat 518G Grapple Skidder, 28Lx26 tires, Rear tires are 50% and fronts are 65%. Machine is working Daily!! - Item ID12621 - Keaton 800-315-9950 x606 1989 Ford L-9000 w 2005 Prentice 120E - Very clean Ford L-9000 Loader Truck with newer 2005 Prentice 120E loader with 25’ extenda-boom. Has new battery; 350 HP Cummins engine with only 250,000 miles; 3 stage Jake; New Tires!; New seals; Just had brakes done. - Item ID-12736 - Tom 800-315-9950 x604 1989 JD 640D Grapple Skidder - 1989 model 640D turbo with EZ Grapple. Serial Number W640DC507211 28L-
Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers
Call 800 752-0627
Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.
Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.
B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com
Web Site: www.paynesaws.com
26 tires 3@35% 1@85%. Runs good. Needs seat recovered and front U-Joint. Priced to sell! - Item ID-12676 - Tom 800-315-9950 x604 1990 Bell Super T Feller Buncher - Totally rebuilt by owner. Rebuilt Deutz engine; Rebuilt Wheel Motor; Standard controls: Comes with both 30” bar dangle head and 15” shear head. 23” Tires - Item ID-12710 - Tom 800-315-9950 x604 1991 Barko 160 Articulated Carrier - Good running machine with about 9,000 hours. Mounted on Rough Terrain 4 wheel drive carrier that can pull a trailer and work in sloppy conditions. Great value for a loader on a carrier like this! - Item ID12931 - Tom 800-315-9950 x604 1991 Franklin Swamp Cable Skidder - 1991 Franklin
Swamp Buggy Cable Skidder. SR#14372. Hour Meter: 9515hrs. Detroit 4-53 Engine: 67x3400x26 Tires (70% Rubber); Running and Ready to Work. - Item ID-12848 Tom 800-315-9950 x604 1992 Ford L8000 with a 1986 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1986 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, Owner is open to offers - Item ID-12025 Keaton 800-315-9950 x606 1993 Hitachi 160 w/Risley Slingshot Harvester Machine looks rough but is cutting and processing wood today. Super value! Includes spare boom. - Item ID-12881 -
For Classifieds Call Your LBX REP at 1-800-315-9950
November 2013 n 13
P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438
www.multitekinc.com • sales@multitekinc.com
Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour
Made in the U.S.A.
Hard to Find!
2009 Peterbuilt Clean-up Truck
‘97 CAT 527 Tracked Skidder
2008 CTR 450 Delimber
w/ a 2009 Extenda Boom Loader
w/Enclosed Cab Item ID: 12902 Contact: Tom Ph: 800-315-9950 x604
Less than 100 hrs. Item ID: 12900 Contact: Tom 800.315.9950 Ext. 604
Item ID: 12597 Contact: Keaton 800.315.9950 x606 www.LBXonline.com
Tom 800-315-9950 x604 1993 Hydro Ax 311 FB w/2 Heads - Estimated year of 1993. This Hydro Ax 311 comes with a bar saw head and a 18” Shear Head. Unit has new Cummins engine. 23.1 x 26 tires at 85%. Runs good. Fantastic value! - Item ID-12990 - Tom 800-315-9950 x604 14 n
www.LBXonline.com
www.LBXonline.com
1994 Barko 275B Stationary Loader - Includes Mounting platform and 75HP electric motor. Very few hours as this machine was taken down shortly after purchase and was never used again. Has been sitting in excess material yard. Has 30’ reach. Continuous rotation grapple. Cab with AC. Original price was $140,000 - Item ID-12969 -
Tom 800-315-9950 x604 1994 JD 640E Cable Skidder Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-
The Original Lumberman’s Exchange
‘04 Barko 495 Loader w/ Delimber Item ID: 12897 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 12500 - Tom 800-315-9950 x604 1994 Prentice 180D Log Loader - 1994 Prentice 180D Log Loader, 11,793 hours, Machine is in good condition, it has been sand blasted and painted, low pro tires 17.5 - Item ID-12759 Keaton 800-315-9950 x606 1995 Caterpillar 518C Grapple Skidder - 1995 518C Caterpillar log skidder. This machine is clean and is ready
Visit us online at www.LBXonline.com!
PIPER’S Saw Shop ‘97 Bell TF-120 Feller Buncher Item ID: 12835 Contact: Keaton Ph: 800-315-9950 x606
www.LBXonline.com
5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer
Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”
$14.71 $14.27 each Tell us you saw it here!
L im it e d T im e O n ly
‘02 Timberjack 608S w/Hot Saw Item ID: 12194 Contact: Keaton 800.315.9950 x606 www.LBXonline.com
to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All
fluids and filters have been changed. The tires are 28L26 in size and the tread will average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Keaton 800315-9950 x606 1995 Entyre Low Boy Trailer - 9’ 10” wide. Decent condition. Priced to sell Item ID-12946 - Tom 800-3159950 x604 1995 Great Dane Flat Bed
Trailer - 1995 Great Dane 96x48ft. Will need floor. Tires are fair. Lights and brakes work. Priced to sell. - Item ID-12892 - Tom 800-315-9950 x604 1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. New water pump. Runs well. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood. Priced to sell! - Item ID-12206
For Classifieds Call Your LBX REP at 1-800-315-9950
- Tom 800-315-9950 x604 1995 KMC Tracked Grapple Skidder - 4200 hours; Detroit 453 engine; Esco 100” grapple; Clark winch; Tracks at 50%; Currently pulling logs in wet areas in Arkansas. Priced to sell! - Item ID-12798 - Tom 800-315-9950 x604 1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. November 2013 n 15
‘95 CAT 518C Grapple Skidder Item ID: 12302 Contact: Keaton 800.315.9950 x606 www.LBXonline.com
Machine is fast and in very good condition. - Item ID12531 - Tom 800-315-9950 x604 1995 Prentice 210D - 1995 Prentice 210D mounted on a 1989 Mack truck, new battery and cables, new starter, new muffler and pipe, 4 cyl cummins engine, all fluids and filters recently changed, turn table is tight, Stick controls, All rebuilt 16 n
‘05 Barko 595 Loader on NEW SP Carrier Item ID: 12912 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
suspension on the mack truck, Truck is road ready. - Item ID-12652 - Keaton 800315-9950 x606 1995 Valmet 503 w/Koehring 18” Saw Head - Totally rebuilt. New Deutz 4 cyl Engine w/less than 100 hours. New Disc on Koehring 18” bunching head. New glass in cab. New 28L tires! Pins tight. Valve resealed.
The Original Lumberman’s Exchange
AC blows cold. Can spin the tires! Owner painted for improved image on jobs. Just 4800 total hours. Selling now due to larger timber and needs bigger machine. Must see to appreciate. This unit is totally ready for the woods. Uses 4 gal/hour. Item ID-12545 - Tom 800-3159950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 Tom 800-315-9950 x604 1996 Cat D5H XL Dozer - 1996 Cat D5H XL. 50% Undercarriage. 6 way blade. Open ROPS. 5407 Hours.
Runs good. - Item ID-13021 Tom 800-315-9950 x604 1996 Franklin 560 Cable Skidder - Serial number 16432; Cummins Recon engine with 177 HP; 28L Tires at 60%; Heat and AC; Running today in very good condition. Hour meter broken. Estimated 9500. Item ID-12734 - Tom 800-3159950 x604 1996 JD 540G Cable Skidder 1996 JD 540G Cable Skidder; 18.4x34 tires 2 new, 2@80%. Front Blade. Tight and dry. Seat reupholstered. Runs good. Great for small jobs and tight places! - Item ID13013 - Tom 800-315-9950 x604 1996 Prentice 210D Knuckleboom - 1996 Prentice 210D Knuckleboom loader. 10,332 hours. - Item ID-12914 - Keaton 800-315-9950 x606 1996 Timbco 425B w/
Visit us online at www.LBXonline.com!
‘07 Tigercat 718E Feller Buncher
‘06 Hyd-Ax 764 w/1910 Mower
Great Condition!
Runs Great!
Item ID: 12989 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Item ID: 12987 Contact: Tom Ph: 800-315-9950 x604
Fabtek Head - Good running machine with 9650 hours. Cummins 6BT5.9 engine. 24” pads. U/C at 50% or better. AC/Heat/Stereo all work. Fabtek Model 2000RP 4-Roller processor head. Item ID-12830 - Tom 800-3159950 x604 1996 Timberjack 230 Forwarder - 15,000 hours.
Good running condition. Working today. Serco Loader. Dry and still runs strong. Item ID-12943 - Tom 800-3159950 x604 1996 Timberjack 450C Grapple Skidder Approximately 9000 hours. Working today. 28L x 26 tires at 40%. Chains for front tires. Single Arch Grapple.
www.LBXonline.com
‘94 Prentice 180D Log Loader Item ID: 12759 Contact: Keaton 800.315.9950 x606 www.LBXonline.com
Winch. Heat and AC work well. Cummins Power. - Item ID-12769 - Tom 800-315-9950 x604 1997 Bell TF-120 Feller Buncher - 1997 Bell TF-120 Feller Buncher, 2500 hours, heat/air, U/C 90%, Hydraulic system rebuilt in April 2012, 30” dangle head - Item ID12835 - Keaton 800-315-9950 x606 1997 Cat 527 Grapple
For Classifieds Call Your LBX REP at 1-800-315-9950
‘83 CAT 988B 5228 hours! Item ID: 12375 Contact: Keaton 800.315.9950 x606
www.LBXonline.com Dozer - 1997 CATERPILLAR 527GR, Tracked Grapple Skidder. Just under 16,000 hours. ESCO Fixed Boom Grapple & Winch Drum (no cable attached), 6 Way Blade, ROPS with Wire Cage Cab. Very good interior. Undercarriage at 70%, Tracks at 90%, Well maintained and ready to work. - Item ID-12901 - Tom 800-315-9950 x604 1997 Cat 527 Grapple Dozer w/Enclosed Cab 1997 CATERPILLAR 527GR November 2013 n 17
BANDSAW BLADES
We have the most popular sizes in stock & ready to ship from major manufacturers, including…
We also offer expert Sharpening Services, plus…
Gang • Edger • Scragg Trim • Split • Strob …and
just about any Custom Saws you need to keep you cutting longer… for less!
Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425
‘06 Serco 300 Loader on Carrier w/Saw
(Only 1500 hours) Item ID: 12974 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Tracked Grapple Skidder. 14,300 Hours. Enclosed Cab with AC / Heat. Cab in good condition. ESCO Swing Boom Grapple works very well. 26” pads on 70% undercarriage. 6 way Blade. Machine has been very well maintained and runs very well. Ready to go to work today. - Item ID-12902 - Tom 800-315-9950 x604 1997 JD 650G Dozer w/ Forestry Pkg - 1997 JD 650G Dozer with winch and fair lead. Unit has 70% undercarriage; grousers are 50%; 5693 hours; Sweeps and screens; Rock guards; JD winch with log arch; Few small leaks; Unit starts and runs great; Machine has only had 250 hours put on it in about 4 years. New paint and decals. - Item ID-12793 - Tom 18 n
‘11 JD 1010E 8-Wheeled Forwarder
Item ID: 12955 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 800-315-9950 x604 1997 Linkbelt 3400 Stroke Delimber - 1997 Linkbelt 3400 has rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage. 5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber. - Item ID-12992 - Tom 800-315-9950 x604 1997 Prentice 210E TMS Package - 9850 Hours on this very clean machine. Working today. Has total merchandising system with CTR 414 Delimber and CTR 42 Slasher. Well maintained. Has AC but is not working. - Item ID-12563 - Tom 800-3159950 x604 1997 Timberjack 460 Grapple Skidder - 12,300 hours. Very well maintained. 28L x 26 tires at 90%. Big winch. 100” Esco Grapple. Cummins
The Original Lumberman’s Exchange
‘08 John Deere 334J Only 900 hrs! Item ID: 13034 Contact: Keaton 800.315.9950 x606 www.LBXonline.com
engine. Working today. - Item ID-12564 - Tom 800-315-9950 x604 1998 Franklin 170 Cable Skidder - 1998 Franklin Cable Skidder; Unit has 28Lx26 tires 50% rear and 30% front; Recon Cummins 6BTA5.9 engine added about a year and a half ago; Hour meter is broken; H38 Franklin winch; Very clean and works almost everyday. Chains NOT included. - Item ID-12735 Tom 800-315-9950 x604 1998 Freightliner Haul Truck - 1998 Freightliner. Decent running condition. 923,000 miles. Well maintained. Good back up rig! - Item ID-13022 Tom 800-315-9950 x604 1998 John Deere 650G Dozer - New tracks 95%, very good shape, 7,000 hours. 6-Way Blade. - Item ID-12700 - Tom 800-315-9950 x604
1998 Model DM Mack Log Truck - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 - Tom 800-315-9950 x604 1998 Pitts 42’ Log Trailer Nice condition. 42’ long. 102” wide. 95,000 lb GVW. - Item ID-12565 - Tom 800-315-9950 x604 1998 Tigercat 230 Loader 9400 hours. Tight and dry. No leaks. AC blows cold. Priced to move! - Item ID12616 - Tom 800-315-9950 x604 1998 Timbco 425 w/Quadco 2800 Saw - Clean unit and well maintained. 2800 has 360 degree rotation for max production. 24” single grousers. Undercarriage at 50%. Pumps are dry. Machine working today. - Item ID12719 - Tom 800-315-9950 x604 1998 Timbco 820 Forwarder - Good running condition. New Cummins engine. Tires at 80%. 5600 hours. Bunks included. Pictured with Clam Bunk Grapple. Has stakes for forwarder application. Plumbed for grapple saw.
Visit us online at www.LBXonline.com!
To find the nearest dealer call:
(888) 820-3962 For Classifieds Call Your LBX REP at 1-800-315-9950
November 2013 n 19
‘07 Peterson 4800E Portable Make Debarker Clean
Item ID: 12895 Chips! Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘01 Timbco 445D w/Quadco 2800 Saw (Price dropped!)
Item ID: 12486 Contact: Tom 800.315.9950 Ext. 604
www.LBXonline.com
‘97 JD 650G w/ Forestry Pkg.
Nice package. - Item ID-12454 - Tom 800-315-9950 x604 1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800-315-9950 x604 1998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. 20 n
Just installed new Reman Cummins 4BT3.9 Engine. Item ID-12525 - Tom 800-3159950 x604 1999 Bell Ultra C with 30” Dangle Head - 1999 Bell Ultra C with 30” Dangle Head, 6922 hours, Brand NEW Cummins engine with 350 hours, 28lx26 tires at 50%, includes a set of mud chains at 90%, heat/air work great, no leaks, 2nd owner operator - Item ID12715 - Keaton 800-315-9950 x606 1999 Cat 525B Grapple Skidder - 1999 Cat 525B Grapple Skidder, heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. - Item ID-12618 Keaton 800-315-9950 x606 1999 Deawoo 220 solar ll - 11000 hours, it has
The Original Lumberman’s Exchange
Item ID: 12793 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
heat and air! Its a Daewoo inline 6 Engine 145 hp. The Computer works for the stroker. Tracks are around 11’. I have all the maitenance records and extra parts! Great running machine! Item ID-12936 - Chris 800-3159950 x600 1999 JD 643 DELTA Carrier w/Rake - This machine is a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work a mower, feller buncher saw head, or high speed mulcher. Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra
‘93 Hydro Ax 311 FB w/2 Hds Cheap and Runs Good! Item ID: 12990 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com capacity fuel tank, water tank, and hydraulic tank. This is a WORK HORSE and a super value! Comes equipped with a 10 foot rake. The cab is well appointed with cold air and heater. This machine was recently completely serviced and is ready to go to work. - Item ID-12624 - Tom 800-315-9950 x604 1999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x604 2000 Cat M318 MH - Totally refurbished with 30 day
Visit us online at www.LBXonline.com!
The Height of Technology
NEW
° TURBO 7
E L AD B GG ER FO R A BI
BITE
‘00 Fabtek 153 Harvester ‘07 LogMax 7000 Processing Head w/Top Saw
New engine/pumps! Item ID: 12944 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Item ID: 12885 Contact: Tom 800.315.9950 Ext. 604
THE PEAK OF BLADE
PERFORMANCE Totally Profile Ground Tooth. Available in 13°, 10°, 9°, 7°, and 4°.
www.LBXonline.com
2004 Ponsse Wisent ‘10 JD 748H Dual Arch Skidder Item ID: 12973 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Idaho. Financing available. Possible RENT OPTION! - Item ID12520 - Tom 800-315-9950 x604 2000 Fabtek 153 Harvester - 13,000 hours. New Engine; New Pumps; New Roller Chain; Runs Great! Working today. - Item ID-12944 - Tom 800-315-9950 x604 2000 Fabtek 344 Forwarder 12,500 hours. Good running machine. New engine; New
• Extensive flex life allowing multiple sharpenings • Largest selection of widths, thicknesses and profiles • Custom lengths to fit all brands of thin-kerf sawmills
800.522.5760
Item ID: 12856 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Pumps; New forward/reverse lever; New Joysticks; 2 New Tires; Working today and running well. One owner machine. Well maintained. - Item ID-12945 - Tom 800-3159950 x604 2000 GMC 8500 Log Truck w/Loader - 2000 Model GMC C8500: Six speed transmission with a 2 speed rear end. Powered by a strong CAT 3126 engine with 250HP. Approx. 106,000 miles. Truck is single axle with pusher in front. Pusher purchased new one year ago. Loader is a 1995 Prentice Model 120c w/22’ reach. Has one or two hydraulic drips. Pole Trailer is a 60’s model Frost w 80% tires in very good condition. Pulls great. - Item ID-12893 - Tom 800-3159950 x604
• Ideal for resawing applications • Quality cut and high feed rates • Computerized set for accuracy • Consistent grind
woodmizer.com/blades © 2013 Wood-Mizer LLC
2000 Grove RT750 Rough Terrain Crane - Super nice unit. Loaded. 6500 hours. Very good condition. CAT 3116 Diesel Engine; 360 degree rotation. Max reach over 170’ with both jibs. Total weight = 82,500lbs. Tires =29.5 x 25-28 PR earthmover type, bias tubeless at 70%. - Item ID12938 - Tom 800-315-9950 x604 2000 New Holland EC215 w/ Waratah 616 Processor - Approx 7200 hours. 2000 New Holland Model EC215 with Waratah 616 Processing Head; Carrier in good condition. Tracks at 70% with 32‚ Äù pads; Cummins 6BT5.9 engine with 154HP; S/N 721580; Operating weight = 47000 lbs; Waratah head has top saw option. - Item ID-12849 - Tom 800-315-9950 x604
For Classifieds Call Your LBX REP at 1-800-315-9950
2000 Peterbilt Sleeper Truck - Good running condition. Priced to sell. - Item ID-12492 - Tom 800-315-9950 x604 2000 Prentice 625ATL Loader - 2000 Prentice All Terrain Loader. All wheel drive and steer. Set up to pull loaded trailer. Great yard machine. 10,800 hours. Cab access platform. Cab riser. All maintenance history available. FOB: Maine. - Item ID-12898 - Tom 800-315-9950 x604 2000 Sterling Road Truck/ Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x604 2000 Valmet 840 Six Wheeled Forwarder - Good running November 2013 n 21
ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:
• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors
Fax to:
• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase
P.O. Box 2812 • Toledo, Ohio 43606
• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors
800-248-4479
www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical
419-244-8887
‘00 Grove RT750 Crane Excellent Condition! Item ID: 12938 Contact: Tom 800.315.9950 Ext. 604
‘04 Linkbelt 3400 Stroke Delimber
Item ID: 12992 Contact: Tom 800.315.9950 Ext. 604
‘96 Timberjack 230 Forwarder Runs great!
www.LBXonline.com
www.LBXonline.com
Item ID: 12943 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
condition. 14,000 hours. Tracks for rear bogeys. ProHeat system for cold weather starting. New grapple. AC/ Heat work well. Front blade. Well maintained. - Item ID12668 - Tom 800-315-9950 x604 2001 CAT 330BL Log Loader - Good running condition. 2000 hours on new hydraulic pump. 44’ Live Heel Boom w/ Jewell Continuous Rotation Grapple. S/N 6DR04994. New sprockets and rails. Cab riser and cab guard. Total hours 19,000. - Item ID-12678 - Tom 800-315-9950 x604 2001 Chevy C7500 Service Trk w/Trailking Trailer Great package. Chevy truck has Cat 3126B engine. 28,877
miles. 22.5” tires are in good shape. Good steel flatbed with mini fifth wheel and headache rack. Trail King Trailer Model # TK 32-2401. GVWR 40180 lb; GAWR 18160 lb.ea. with 215/75R X 17.5 (16PR); Floor 19’ long; Tail 5’ long; Hyd operated ramps 5’ long. Super package and priced to sell!! - Item ID-12746 - Tom 800-315-9950 x604 2001 John deere 650H Dozer - Engine has 11 hours use. 6522 total hours on frame. It has new everything inside the engine including, rod and main bolts and bearings when engine was rebuilt. He also installed complete rebuild kit with crank replaced. New sensors
for oil was installed, New complete exahaust system, manifold, muffler, turbo and all components to install NEW. He replaced one transmission and motor sensors on right side of dozer. Oil cooler replaced with new one and also new oil pump installed. Every Item for the engine was replaced new except cam and lifters. Dozer runs great but will need two bottom rollers replaced one on each side and there are three rollers bought to go with the dozer. Sprockets and front idlers are nearly new condition. Winch has been rebuilt and cost over $4600.00 to rebuild parts and
22 n
The Original Lumberman’s Exchange
‘91 Barko 160 Articulated Carrier 4-Whl Drive! Item ID: 12931 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com labor. Has cab protection and shield protectors in place. Instrument gauges are bad and need to be replaced, water and hour gauge seem to be working correctly. Oil pressure gauge shows low pressure but with new crank and main bearings the oil pressure should be fine as there are no unknown noises from engine. Starter and Seat is also new. It will need new grousers or pads but new pins and bushings are installed. - Item ID-12721 Keaton 800-315-9950 x606 2001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine
Visit us online at www.LBXonline.com!
with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 Tom 800-315-9950 x604 2001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. New main pump. New radiator. New water pump. New Pro Heat just added. Many other updates. VERY NICE MACHINE! Ready to work. SN FT4C-2002. - Item ID-12486 - Tom 800-315-9950 x604 2001 Valmet 860.1 8-wheeled Forwarder - 2001 Valmet 860.1 8-wheeled Forwarder, 11360 hours, Tracks for rear bogies, heat/air, machine runs and operates very well. This machine has the Sisu engine that uses about 3.8 gal/hour. This machine includes the front blade option and the hood guard option. Selling do to buying a smaller machine. - Item ID12833 - Keaton 800-315-9950 x606 2001 Valmet 860.1 Forwarder - 6 Wheel Drive. Chains for most tires. 17,000 hours. Runs good and is working today. Owner is upgrading. - Item ID-12867 - Tom 800-315-
‘10 JD 648H Grapple Skidder with Tracks! Item ID: 13015 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘10 JD 1110E Forwarder Low hours! Clean! Item ID: 12947 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘04 Timberjack 360D JD 548GIII Item ID: 13011 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
9950 x604 2002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800-315-9950 x604 2002 Tigercat 635 Bogey Grapple Skidder - Very
clean machine. 6700 hours. Cummins 250HP. 30.5 x 32 Front Tires and 28L x 26 Tires in Rear. All at 90%. Trail Blade; Dual Arch Grapple with BIG capacity. VIN: 6350138 - Item ID-12558 - Tom 800-315-9950 x604 2002 Tigercat 845B w Quadco Hot Saw - 8500 hours on machine. About 3200 on new Cummins engine. Quadco head has 40 degree tilt and new saw blade. Tracks at 60%. Rebuilt 2 years ago.
For Classifieds Call Your LBX REP at 1-800-315-9950
Well maintained. Heat and A/C in cab. - Item ID-12751 Tom 800-315-9950 x604 2002 Timbco 425D Processor w/Rolly II - 2002 Timbco 425D with Rolly II disc saw processor head. 14,000 hrs. New Cummins engine; New saw motors New sprockets; New hyd pumps. Leveling upper. Heat/AC in cab. Very sound machine that runs well. - Item ID-13014 - Tom 800-315-9950 x604 November 2013 n 23
Financing Available
Shrink Wrap Firewood/Wastewood
Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee. B & B Manufacturing • 3007 West River Road • Olean, NY 14760
Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/
‘07 Prentice 384 Loader Pgk. Loader/Del/Trailer!
Item ID: 12997 Contact: Tom 800.315.9950 Ext. 604
‘08 Prentice 2210 Stationary Loader Item ID: 13017 Contact: Tom 800.315.9950 Ext. 604
‘96 JD 540G Cable Skidder Runs good!
Item ID: 13013 Contact: Tom 800.315.9950 Ext. 604
www.LBXonline.com
www.LBXonline.com
www.LBXonline.com
2002 Timbco 425D w/ Fabtek Proc. Head - Very nice machine and well maintained. 11,229 hours, but only 1400 on recon Cummins engine. 24” Single Grousers. Undercarriage is 70%. Fabtek has been rebuilt and updated to make it stronger than new. Head works great. - Item ID-12659 Tom 800-315-9950 x604
2002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only
700 hrs. on rebuild.. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist... Main boom to stick boom pin and bushings have been replaced in a the last 3 months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 - Tom
24 n
The Original Lumberman’s Exchange
800-315-9950 x604 2002 Timberjack 608s with hot saw - 2002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Keaton 800-3159950 x606 2003 Franklin Q70 Grapple Skidder - 2003,Model Q70M31A,Enclosed Cab W/ Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 Tom 800-315-9950 x604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 Tom 800-315-9950 x604 2003 Hydro Ax 670 with Bunching Head - Super nice machine with ONLY 1600 hours! 30.5 tires at 90%. Cummins 6BT8.3 engine. AC/ Heat. Side pocket style head. Jewel of a machine! - Item ID-12729 - Tom 800-315-9950 x604 2003 JD 648GIII Dual Arch Grapple Skidder Refurbished 2003 JD 648GIII Dual Arch Grapple Skidder with approx. 8000 hours. 30.5 x 32 tires at 50% or better. The machine is dual arch w/ reman arch, boom, grapple, engine and transmission. The machine also has had the normal repairs of: resealed all cylinders, pins and bushings, center pins, cradle and addressed all electrical issues. Any potential problems were found and
Visit us online at www.LBXonline.com!
‘05 Timberking TK360 Feller Buncher Item ID: 12995 Contact: Tom Ph: 800-315-9950 x604
Reconditioned Electrical Equipment Saves You Money, Big Money!
‘00 New Holland w/Waratah 616
VFD Control
Low price; new computer!
We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment
Many Items In Stock Ready for Immediate Shipment!
Item ID: 12849 Contact: Tom Ph: 800-315-9950 x604
Automatic Reduced Voltage Starter
All Sizes of Motors
www.LBXonline.com
www.LBXonline.com
Manual Transfer Switch
Combination Starter
When you need it Now— And at the Best Price! You Need Weaver Electric Motor Control Starters (Solid State)
‘02 Timbco 425D Processor w/Rolly II Item ID: 13014 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
fixed or replaced. Limited Power Train Warranty. Can exchange existing tires for new and receive credit on existing tires against new tire price. Ex: add new 30.5 x 32 tires for $14,000. - Item ID-12905 - Tom 800-315-9950 x604 2003 Prentice 490 Grapple Skidder - 2003 Prentice 490 Dual Arch Grapple skidder. 9400 hours. Good running condition. 67 x 43 flotation tires WITH 2 EXTRA TIRES & RIMS! Great value for the package. - Item ID-12979 Tom 800-315-9950 x604 2004 Barko 495 Loader w/Delimber - 2004 495 Barko ML. 11000 Hrs. New
Call Today!
‘08 JD 2054 Log Loader (New U/C)
Toll Free 800-257-0038
Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com
Item ID: 12967 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Turntable Bearing. Upper and Lower Valves Resealed. Both swing motors resealed. New pins and bushings in main and jib boom. CTR 450 Delimber. Cold AC. - Item ID-12897 - Tom 800-315-9950 x604 2004 Cat 330C Log Loader - 14,500 hours. New undercarriage on it, rebuilt the grapple, repacked boom cylinders, put in new air ride seat, new climate control system, and a few other things. Last year we pulled the engine out and went through it and also had the pump gone through. Runs very well. Great Value! - Item ID-12686 - Tom 800-315-9950 x604 2004 Cat 535B Grapple Skidder - SIN AAE00566, 12,000 hours. Replaced
Disconnect Switch
center pins, repacked cylinders, and repaired hydraulic control valve for grapple. 73 x 44, 32 tiresRuns good. Priced to sell! - Item ID-12693 - Tom 800-3159950 x604 2004 Fabtek 133 Harvester - 11,400 hours. One owner machine. Very nice condition. Fabtek 4 Roller processing head. Pro Heat cold weather start system. One track is brand new. Working today. Customer shutting down job. - Item ID-12950 - Tom 800-315-9950 x604 2004 Franklin Q80 single arch grapple skidder with winch - 200 HP Cummins engine Powershift transmission Comfort cab with working heater and AC New Manifold gasket and bolts New muffler New grapple head New shifter box Tires 85% 28L X
For Classifieds Call Your LBX REP at 1-800-315-9950
26 Good Solid Machine- Runs great! - Item ID-12843 - Chris 800-315-9950 x600 2004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800315-9950 x604 2004 John Deere 700H LGP - This machine has 1987 hrs on a crate motor. Very Strong running machine. Being used daily! Limb Risers, screens, 6 way blade, 30” pads. - Item ID-13035 - Chris 800-315-9950 x600 2004 Log Max 9000 Proc. Head - 2004 Log Max 9000. Good running condition. November 2013 n 25
‘10 Valmet 430 FXL w/Risley Hot Saw Low Hours! Item ID: 13000 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Rebuilt every year. Many spare parts. Computer included. Super Value! - Item ID-12929 - Tom 800-315-9950 x604 2004 Ponsse Ergo Harvester - 13,000 total hours 10,000 operating hours, New rollers, roller motors, all modules updated, $25,000 per year in preventative maintenance. Pinned and bushed every two years since new. Tracks not included. - Item ID-12697 - Tom 800-315-9950 x604 2004 Ponsse Wisent - Very nice machine. Many recent updates such as new batteries and alternators. Tight and dry and working 26 n
‘00 Fabtek 344 Forwarder New engine/pumps Item ID: 12945 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
today. 13,000 hours. 8 wheeler that includes Eco Tracks for rear bogey. Tires at 70%. - Item ID-12856 - Tom 800-315-9950 x604 2004 Tigercat 240B Log Loader on Trailer - Very clean. One owner machine. Good maintenance. Tight and dry. 6800 hours. Cummins engine. Loading logs now. - Item ID-12617 - Tom 800-3159950 x604 2004 Tigercat 635 Bogie Grapple Skidder - Big Capacity Long Range skidder for the big jobs! Includes winch and front blade. Cummins engine. Runs good and priced to sell. 10,000
The Original Lumberman’s Exchange
‘07 CTR 950B Grapple Skidder Bargain! Item ID: 12664 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com hours. NEW 35.5 Front Tires. 67 x 34 rear tires at 50%. Machine is tight and dry. Item ID-12615 - Tom 800-3159950 x604 2004 Tigercat 724D Feller Buncher - Only 2500 CONFIRMED hours in May. One owner who is a construction contractor that only used this machine on occasion. New engine installed in 2010. Tigercat 22” Hot Saw. 44” tires @ 70%. Real clean machine and a great buy! - Item ID-12496 Tom 800-315-9950 x604 2004 Timbco 425 w Bar Saw Head - 5600 hours on this very clean machine. Timbco
33” bar saw head has 360 degree rotator for maximum production. Unit comes with 2 sets of tracks: 36” as seen on machine and 24” single grousers for aggressive climbing. Undercarriage is at 50% or better. Pumps pull well. Cummins 260 HP engine. - Item ID-12718 - Tom 800-315-9950 x604 2004 Timberjack 360D (JD 548GIII) - Super Clean Machine. Just 3500 hours and well maintained. This is the same as a JD 548GIII only with Timberjack decals. JD engine and axles. JD Dealers can service with no problem. 28L x 26 tires at 60%. Has winch but needs to be repaired. New Lexan glass in Cab. A/C & Heat work well. Great for small tracts! - Item ID-13011 - Tom 800-315-9950 x604 2005 Barko 595 Loader on NEW SP Carrier - 2005 Barko 595ML Loader on Brand New Big John Self Propelled Carrier. Carrier is towable. Unit has 7700 Hrs. Equipped with Live Heel and continuous rotation grapple. Has JD 185HP engine. Has Cab Riser with Tilt Option for easy transport. - Item ID-12912 - Tom 800-315-9950 x604 2005 Ecolog 580B Harvester - Ecolog 580B Harvester with Log Max 7000 Processing Head w/Steel Rollers. Very good running condition. S/N 240. 7700 hours. Recent updates include: New water pump; New implement pump; New swing motor; New hydraulic oil cooler and oil cooler bypass valve. It has a DASA4 control system and ICAN monitoring system. Rear bogeys are 650 size and include one set of
Visit us online at www.LBXonline.com!
Sawmill Exchange North America's Largest Source of Used Portable Sawmills. Over 800 Ads:
tracks. Engine is Cat 3126. Equipped with a Wabasto preheater. Machine is factory reconditioned by Ecolog. Center section and bearings are new. - Item ID-12826 - Tom 800-315-9950 x604 2005 Fabtek 546 Six Whl Forwarder - Very nice six wheeled unit. 15 ton capacity. All functions working well. Front Blade. 10,790 hours. Tires at 60%. Owner needs to move. - Item ID-12804 - Tom 800-315-9950 x604 2005 Komatsu D39 PX Dozer - Approx. 2150 hours, 6-way dozer, canopy, joystick controls, limb risers 25” pads, SBG, new hydrostats and pumps Undercarriage 75%, condition good to very good - Item ID-12994 - Tom 800-315-9950 x604 2005 Ponsse Ergo Harvester - Very clean machine with 10,000 operating hours. Includes the Ponsse H73E harvesting head WITH oversized 800cc motors for great performance. Very well maintained and all recent updates have been installed. Priced well below market - Item ID-12886 - Tom 800-3159950 x604 2005 Prentice 280 TMS Good running machine. Hour meter shows less than 2000
hours but owner believes it to have about 6000. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blowby and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527 - Tom 800-315-9950 x604 2005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID-12413 Tom 800-315-9950 x604 2005 Tigercat 718 FB w/5500 Saw Head - Very well maintained machine with 9400 hours. Dry and tight. 28L tires at 60%. Running good today. AC blows cold. Heat works great. Center section tight. - Item ID-12939 Tom 800-315-9950 x604 2005 Timberking TK360 Feller Buncher - 2005 Timberking TK360 Rubber tired feller buncher, good condition 9023 hours, new A/C. 22‚Äù high-capacity head w/side cutter put on at 5000 hours. Front tires at 75%, back tires 50% - Item ID-12995 - Tom 800-315-9950 x604 2005 TimberPro 830
Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!
The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.
800-459-2148 (
)
US & Canada
www.sawmillexchange.com P.O. Box 710930 • Houston, TX 77271 Forwarder - Super Nice TimberPro 830 Forwarder w/8 wheels. Only 5300 documented hours. Excellent condition. Includes one set of tracks. Has 4’ Bunk Extensions; Telescopic Boom on Loader; Comes with grapple but is plumbed for harvesting head. S/N 830F0102. - Item ID-12708 - Tom 800-315-9950 x604 2005 Valmet 860.1 8-Wheeled Forwarder - 13,800 hours. New hydraulic transmission and gear box. $70,000 of updates just completed by local Valmet/Komatsu Dealer. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard. - Item ID-12267 - Tom 800-315-9950 x604 2005 Valmet 941 Harvester
For Classifieds Call Your LBX REP at 1-800-315-9950
- Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Tracks included for bogeys. Has spare 370.2 head for parts. Engine runs well. Tires at 50%. This is a hard to find gem and priced below market. - Item ID-12569 - Tom 800-315-9950 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at November 2013 n 27
Safety� Safe Durable� Durable
Comin gS 4 New oon Mode ls
TheFirewood FirewoodFactory� Factory The ™�
Beaver Model 16
™�
Coming Soonodels
4
Reliable� Reliable� Reliable
Convenience� Convenient
Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood from 12” to 24” lengths • Splitter cycle time 4.5 seconds Starting at • PTO driven $ Beaver Model 18 • Honda Engine GX-630 630cc
Made in the USA
New M
8995 Optional Features Availale
Call Toll Free
Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net Safety�
Durable�
60%. Sisu engine that is very 2006 John Deere 748GIII Dual stingy on fuel. 8’ squirt at Arch Skidder - 8900 hours. end of boom for 30’ reach. Good condition. Working Reversible fan and auxiliary today. One owner machine. oil cooler. - Item ID-12266 Tight and dry. 32.5 tires at ™� Reliable� Convenience� Reliable� Tom 800-315-9950 x604 50%. - Item ID-12542 - Tom 2006 Hydro-Ax, Model 764 800-315-9950 x604 w/ AX1910 Mowing Head 2006 Peterbuilt Log Truck 2006 Hydro-Ax, Model 764 w/Loader & Pup - 2006 w/ AX1910 Mowing Head. Peterbuilt log truck and Rosa 4700 hours. Cummins engine. aluminum crib pup trailer. 30.5 x 32 tires at 60% or Has Rotobec Model 80 elite better. Includes tire chains loader. Cummings motor for all tires. Good running with 450,000 miles. Excellent condition. Well maintained. shape. Hauling logs today. - Item ID-12987 - Tom 800-315- - Item ID-13018 - Tom 800-3159950 x604 9950 x604 2006 JD 310 Loader/Backhoe 2006 Prentice 384 w/ CSI 264 - 1762 Hours. Very nice Delimber - 8800 hours. New condition. Extenda-Hoe in Swing Motor. New Cummins back. 4-way bucket in front. 4 Tier II engine in 2009 w/3000 wheel drive. No leaks. Stored hours. Pitts Trailer. Rotobec under cover. Runs great! continuous grapple. Runs Item ID-12464 - Tom 800-315good! - Item ID-12682 - Tom 9950 x604 800-315-9950 x604 2006 JD 748GIII Dual Arch 2006 Serco 300 Loader on Skidder - Approx 8400 Carrier w/Saw - Total yard hours; Very well maintained; loader package. Super 30.5 tires at 40%; Sweda condition. Only 1530 axles; Winch. Unit working documented hours. Savage everyday. - Item ID-12117 Self Propelled Carrier. Circle Tom 800-315-9950 x604 Saw slasher on pull behind 28 n
The Original Lumberman’s Exchange
trailer. 32’ reach. Joystick controls. LIKE NEW! - Item ID-12974 - Tom 800-315-9950 x604 2006 Tigercat 630C Grapple Skidder - Decking blade, new a/c installed, new hydrostats; Dual function grapple, 40K Allied winch; 30.5L32 tires, 3 @ 75%, 1 @ 20% Condition good to very good, Approx. 6900 hours - Item ID-12996 Tom 800-315-9950 x604 2006 Tigercat 720D Feller Buncher - 2006 Tigercat 720D Feller buncher with New Cummins Engine, Enclosed Cab heat & air, 28.1 x 26 Tires, 5000 series sawhead. 7012 hours. Very good condition. S/N 7204313 - Item ID-12752 - Tom 800-315-9950 x604 2006 Valmet 890.3 Forwarder - Well maintained 20 ton forwarder by Valmet. Has 13,700 hours. Very good running condition. Front hood guard and two complete sets of tracks included. Located on West Coast. Priced to sell! - Item
™�
‘06 Tigercat 630C Grapple Skidder Item ID: 12996 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
ID-12709 - Tom 800-315-9950 x604 2007 CTR 950B Grapple Skidder - Excellent Condition. Only 3500 hours. Single arch grapple. 30.5 x 32 tires at 60%. Heat/AC/Stereo in Cab. Cummins 6 cyl. engine. Just a great value! CTR was owned by Prentice, and is now supported by CAT Dealers. - Item ID-12664 - Tom 800-3159950 x604 2007 Dodge Service Truck - 2007 Dodge Service Truck with 5.9L Cummins. This is the last of this kind of engine. Includes tools, fuel tank, spare parts, and air compressor. Super Package! - Item ID-12910 - Tom 800-3159950 x604 2007 Fecon FTX440 w/Fecon BH 350 Mulcher - 2007 Fecon FTX440 w/Fecon BH 350 Mulcher; Totally rebuilt in 2009 by Fecon with all 2009 updates. 1670 hours. Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell! Item ID-12632 - Tom 800-3159950 x604 2007 Lamtrac 6125 Tracked Mulcher - 2007 Lamtrac Model 6125 Tracked Mulcher. Purpose built. 125hp Cummins engine. Only 936
Visit us online at www.LBXonline.com!
hours. Purchased brand new in April 2012. Tracks at 50%. Includes winch. Full protection comfort cab with AC/Heat. Compare to new at $155,000. - Item ID-12909 Tom 800-315-9950 x604 2007 Liebherr A924B Wheeled Log Loader 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world. This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 -
Tom 800-315-9950 x604 2007 Log Max 7000 Processing Head - Super Clean unit that includes the top saw option. Designed for quality processing. Dual tilt cylinder option. Includes the Log Mate 400 computer system for accurate measuring. Also includes rotator. Approx. 4800 hours on head. Wheel motors like new. Dry and tight. Ready to work. - Item ID-12885 - Tom 800-315-9950 x604 2007 Prentice 2432 Dual Arch Skidder - 10,070 hours. 43î Tires: 50% - 80% + spare. Dual Arch Grapple; Winch; Extra Wide Blade; New Cummins Tier II engine in 2010 w/2500 hours. New injector pump recently installed. NOTE: Comes with spare tire! - Item ID-12683 - Tom 800-315-9950 x604
‘85 IH Dresser TD-12 Dozer Forest Package! Item ID: 13026 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
2007 Prentice 2570 w Quadco 22” Saw - Just 6400 total hours. New Cummins 190HP engine ÔøΩ same size as 2670. Paid $18K for new engine at 6000 hours. Included computer. 28L x 26 tires at 60%. New Hydraulic Motor. Comfort cab with heat and AC. Runs great! - Item ID-12684 - Tom 800-315-9950 x604 2007 Prentice 384 TMS
For Classifieds Call Your LBX REP at 1-800-315-9950
‘10 Valmet 445FXL
Item ID: 13023 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Loader Package - 2007 Prentice 2384 t/a trailer mounted log loader Cummins 6-cyl engine. New injectors and pumps in Jan ’13. New a/c installed, 32’ length boom. 2006 John Evans trailer with 75% 11-22.5 tires. Includes CTR Delimber. Condition is good - Item ID-12997 - Tom 800-3159950 x604 November 2013 n 29
Real Tuff Baler REduced
Plus
Forage Box
REduced
Conveyor
REduced
Jackson Shavings Mill! Item ID: 12795 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com 30 n
The Original Lumberman’s Exchange
2007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x604 2007 Tigercat 718E Feller Buncher - 2007 Tigercat FB with 5000 Bunching Saw Head. 8900 hours. Very well maintained. Good running condition. Cummins engine. Tight and dry. 28L x 26 Tires at 50%. 1000 hours on rebuilt engine. - Item ID-12989 - Tom 800-315-9950 x604 2007 Valmet/Komatsu Model 911 Extreme Harvester - Only 3300 hours on this special machine. Has new Log Max 6000 just added with full warranty from Log Max. Individual tracks on each hub allow this machine to climb where NO OTHER MACHINE can go! New 700 tires and rims come with it for rubber tired operation. Recently gone through and updated. Very unique and hard to find a machine like this! Priced well below market. Sold new without head in 2008 for $575,000! - Item ID-12571 - Tom 800-3159950 x604 2008 Barko 495ML on Pitts Trailer - 2008 Barko 495 ML; Pitts Hydraulic Trailer; 320 CTR Delimber with new knives; 10,300 Hrs. Cold AC. Cummins engine. Runs very good. - Item ID-12899 - Tom 800-315-9950 x604 2008 Cat 330DFM Log Loader - 8700 hours. Very well maintained. Undercarriage at 60%. 44’ Live Heel Boom. Continuous rotation grapple. Regularly serviced. Hydraulic tilt cab and riser. Heat and A/C. Total forestry
package. - Item ID-12688 Tom 800-315-9950 x604 2008 CTR 450 Delimber Like new. Used for less than 100 hours. Paint still on unit. Compare to new 450 at $34,000. No description needed. Consider like new. - Item ID-12900 - Tom 800-3159950 x604 2008 Hitachi Forester w/ Waratah 622B - Super clean machine with 9000 hours. Waratah 622B Harvester has been expertly maintained and upgraded during the single contractor ownership. All functions work great on machine. Undercarriage at 80% as the carrier rarely had to move. Triple grouser flotation pads give great stability. Isuzu engine. - Item ID-12816 - Tom 800-315-9950 x604 2008 JD 2054 Log Loader 15,000 total hours, but 9000 estimated working hours. New Undercarriage except for tracks. 34’ live heel boom. Continuous rotation grapple. Cab Riser with tilt cab and guard. - Item ID-12967 - Tom 800-315-9950 x604 2008 JD 648H Dual Arch Skidder - Very nice and good running skidder. Direct drive. 6100 hours. Dual arch grapple. 30.5 x 32 tires at 60%. Very well maintained. - Item ID-12613 - Tom 800-3159950 x604 2008 John Deere 344J - Only 900 Hours!! Great running condition, z-bar, 3rd valve, ride control, intake heater for cold weather starting, heat/ac, stereo - Item ID13034 - Keaton 800-315-9950 x606 2008 Komatsu Model 220LL w/38’ Live Heel Boom - 2008 Komatsu Model 220LL w/38’ Live Heel Boom; Only 2000
Visit us online at www.LBXonline.com!
Integrity • Precision • Quality • Value
Woodmaster See why we are your Best Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!
Thin Kerf
Band Saw Blades Ask About Our Dismanteling Blades
ck Cheut Our O
1-888-857-5153
Quality • Our Service • Our Price
hours. Jewell purpose built Live Heel and 52” continuous grapple. 30” Double Grouser Pads: 4’ cab riser with hydraulic tilt; Cab guard; Exterior Cab Lights; Heat/ AC; Running boards for easy maintenance access. Excellent condition. Great yard machine. - Item ID-12634 - Tom 800-315-9950 x604 2008 Ponsse Bear Harvester - Just 9500 hours. Equipped with best in class Ponsse H8 harvesting head. Very well maintained. Mercedes engine very stingy on fuel. Eco tracks for bogies. Hood guard. Largest harvester on the market. Out produces any other rubber tired harvester for performance and capacity. - Item ID-12810 - Tom 800-315-9950 x604 2008 Prentice 2210 Stationary Mount Loader - 2008 PRENTICE Knuckle
Boom Loader - Model 2210SM; stationary electric; features joystick operation and 75hp electric motor; 440v. FOB: Georgia 8000 hours. Maintenance records available. Mill closed. Machine working well when mill ended operation. - Item ID-13017 - Tom 800-315-9950 x604 2008 Valmet 415 Harvester - Very nice machine. 5500 hours. Valmet 380 Processing head recently rebuilt and running good. 24” pads on 60% undercarriage. Heat and air work well. Sisu engine is stingy on fuel. - Item ID-12866 - Tom 800-315-9950 x604 2009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine. Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine
‘98 Freightliner Haul Truck
‘05 Komatsu D39 PX Dozer
Item ID: 13022 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Item ID: 12994 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
runs strong with no blow by. Machine is tight and dry. Ready to work today - Item ID-12530 - Tom 800-315-9950 x604 2009 TimberPro 630B with Logging Boom - Only 3600 hours on this super clean machine! No Attachment. Used for pipe line clearing and tornado clean up. Job now over. Tracks for bogeys. Can accept grapple saw or
new fixed processing head. Cummins engine. One Owner. Well maintained. - Item ID12656 - Tom 800-315-9950 x604 2010 JD 648H Grapple Skidder - 2010 JD 648H Grapple Skidder. Only 5200 Hours. NEW 30,5 x 32 tires in front; 40% in rear. Ecotracks for all four tires have 80% life. Dual Arch Grapple. Winch. AC/Heat/Stereo all
For Classifieds Call Your LBX REP at 1-800-315-9950
November 2013 n 31
Heavy Duty Forks At Big Savings 1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair 2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $835.00 pair 2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair 2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,205.00 pair 2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . $1,365.00 pair 2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,500.00 pair 3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . $2,495.00 pair 3” thick x 7” wide x 72” long . . . . . . . . . . . . . . . . . . . . $2,825.00 pair 3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,530.00 pair Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair. 3-1/2” thick x 8” wide x 60” long . . . . . . . $3,595.00 pair 3-1/2” thick x 8” wide x 72” long . . . . . . . $3,990.00 pair 3-1/2” thick x 8” wide x 96” long . . . . . . . $5,025.00 pair Also, 4”, 5”, 6” thick forks to 168” long.
■ In Stock ■ Same Day Shipment ■ Let Us Quote Your
Special Design Forks. Very Competitive Pricing.
Made from one piece of steel - not welded. Quality recognized world wide.
Bay Equipment Co. / (616) 392-1811 P.O. Box 1919 / Holland, Mich. 49422 • Fax (616) 392-6238
email: bay.eq.co@gmail.com • www.bayequipmentco.com
‘11 Valmet 430 FXL w/Keto Hd Item ID: 13029 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
work in cab. Tight and dry. Very good running condition - Item ID-13015 - Tom 800-3159950 x604 2010 JD 748H Dual Arch Skidder - Cleanest 2010 you will find!! 7500 hours, but completely gone through. No Leaks! New 30.5 x 32 tires on front....90% on back. New hoses. Recon engine at 3500 hours. Sweda Axles. All 32 n
‘06 Morbark 18 Hurricane Chipper w/Ldr Item ID: 12964 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com cylinders checked. Dual Arch Grapple. SAVE almost 45% off new!! - Item ID-12973 - Tom 800-315-9950 x604 2010 JD 848H Grapple Skidder - 5000 hours. Running duals at this time. Powerful machine. Everything working great. Tires at 50% or better. - Item ID-12800 - Tom 800-315-9950 x604 2010 John Deere 1110E
The Original Lumberman’s Exchange
‘05 Ecolog 580B Harvester Item ID: 12826 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Forwarder - Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and well maintained. Hard to find them with low hours like this! - Item ID-12947 - Tom 800-315-9950 x604 2010 Komatsu PC220LL Log Loader - Super Clean machine. Only 2900 hours. Live heel. Forestry package. Hi rise undercarriage. 31.5” flotation tracks. 38’ reach. 14,680 lb. counterweight.
Does not include grapple but can accept any brand high pressure design. - Item ID-12948 - Tom 800-315-9950 x604 2010 Prentice 2280 TMS Loader Package - Super clean loader/delimber package on trailer. Just 4400 hours. Cummins engine. CTR delimber works great. AC/ Heat/Radio in cab. Engine runs great with no blow by. Tight and dry. - Item ID-12871 - Tom 800-315-9950 x604 2010 Prentice 2670 w/Single Post Saw Head. - Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head. Great Value! - Item ID-12552 - Tom 800-315-9950 x604 2010 Tigercat 630D Grapple Skidder - Super nice Tigercat 630D with 5589 hours. NEW 35.5 Firestones. Cummins engine. Dual Arch HD Grapple. Winch. Excellent condition. Runs great! - Item ID-12738 - Tom 800-315-9950 x604 2010 Valmet 430FXL w Risley Hot Saw - Super Clean Valmet 430FXL with the over-sized Komatsu undercarriage at 70%. Just 4050 hours on a well maintained machine. One owner. Auxiliary oil cooler; Espar Pre Heat system; Fire Suppression System; Risley 22” Hot Saw has had NO problems cutting hardwood. 24” track shoes. Cummins 300HP engine. Well maintained and a great deal. - Item ID-13000 - Tom 800-3159950 x604 2010 Valmet/Timbco 445FXL w/Roy Saw Head - 2010 Valmet 445FXL with HD Komatsu undercarriage at 70%. Just 5750 hours. Many extras. Cold weather start. Deluxe heated seat. GN Roy
Visit us online at www.LBXonline.com!
Owner Sacrifice
Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic
$15,905 Effective May 1, 2012
REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.
2009 Bandit 3680 Beast Recycler Like new! Item ID: 12714 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Hi-Speed Disc Saw head with 360 degree rotation. Very good condition. Well maintained. - Item ID-13023 Tom 800-315-9950 x604 2011 Builtrite Model 60 Stationary Loader - Model 60 Builtrite Stationary Electric Loader. New Condition with only 95 actual hours. The Model 60 has 18í of reach and about 1,100 pounds of lift at full reach, with the grapple attached. The grapple is a º cord, butt styled with gripping bars. It opens to 66î and is 20î wide. This package includes everything from the power pack to the comfort cab with head and AC. If you have a loading challenge in your operation, this is an economical and quiet way to handle it. - Item ID-12705 Tom 800-315-9950 x604 2011 Case TR320 Tracked Skid Steer Mulcher - 2011 Case Skid Steer with mulching head and bucket. Only 300 hours and in excellent condition. Skid Steer has Hi Flow option for maximum performance to head. - Item ID-13020 - Tom 800-315-9950 x604 2011 JD 1010E 8-Wheeled
2011 Case TR320 Skid Steer Mulcher 300 Hours! Item ID: 13020 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Forwarder - Super Nice Machine! Just 2300 hours. Owner downsizing. Comes with new set of tracks and set of chains. - Item ID-12955 - Tom 800-315-9950 x604 2011 JD 848H Grapple Skidder - Just 3200 hours. Excellent condition. Running duals for high flotation. Dual Arch. Winch. Comfort cab! - Item ID-12801 - Tom 800-3159950 x604 2011 Remanufactured KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P ( Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission. John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights, Swivel Suspension seat c/w Joystick Controls. - Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve
PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243
BUILT TO LAST www.realtuffbaler.com
Dear Prospective Customer,
Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!
Real Tuff Baler
Real Tuff Baler Dimensions & Specifications
• Easy to use
- (2) Hydraulic Cylinders are controlled by using a two spool valve
• Built of high quality materials and workmanship
- 30 H.P. motor (220/440 volt 3 phase) starter not included
• Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method
- 25 G.P.M. Pump - 50 Gallon reservoir capacity
. Easy to use
. Built of high quality materials and workmanship
- Only the highest quality industrial components are used
. Heavy Duty to enable a broad spectrum of baling options
. Easily loads by conveyor or manual method Most Popular Baler Sizes
Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price
Bale Size
4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale
Bales per Hour
50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour
Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .
Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00
Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.
- New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty Cast Steel KMC Road/Idler Wheels. Standard Decking Blade. FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID-12549 - Tom 800-315-9950 x604 2011 Valmet 430FXL w/ Keto 870TS Proc. Head 2011 Valmet 430FXL with Komatsu built undercarriage. Includes KETO Model 870TS Processing Head. Less than 3000 hours on total machine. Excellent condition. Head will have all updates according to owner. Compare to new at $600,000! - Item ID-13029 - Tom 800-315-9950 x604 2012 Rayco Tracked Mulcher - 2012 Rayco Tracked Mulcher. 100hp Kubota Engine. Only 950 hours. 90%
For Classifieds Call Your LBX REP at 1-800-315-9950
03/08
track life remaining Serial Number available. Great running condition. Owner leaving business. - Item ID12908 - Tom 800-315-9950 x604 2012 Refurbished FMC 210 Tracked Skidder - 1976 Model that has been totally refurbished in 2012. No hours since updates were done. Includes warranty on machine and tracks. Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission. Clark 40,000 lb Winch. ROPS Cab. Includes bolt on grapple head with full function. New Paint. Item ID-12731 - Tom 800-3159950 x604 45’ Log Trailer - 45’ Log Trailer, spring suspension, tires are in good shape 6 sets of bunks and a headache rack - Item ID-12587 - Keaton 800-315-9950 x606 November 2013 n 33
Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs! Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers
The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales
mfg
Call (423) 698-0284 CORLEY www.corleymfg.com • sales@corleymfg.com
’87 518 Cat Skidder - 15,158 hrs but only 3,000 on rebuilt engine. Rear tires 50% front is around 20%. Machine runs good! - Item ID-12876 - Chris 800-315-9950 x600 95 Bell Ultra T on tracks - Machine has a total of approx. 7000hrs. Deutz engine runs well. Joystick controls. 25” pads on U/C that is 80%. Has 30” Bell dangle saw head. AC works. Needs windows in the doors. Hyd. cooling fan works. Owner advises that he has packed all cylinders on machine within the last year. Owner also reports that during extremely hot days the hydraulic pump seems to get weaker. - Item ID-12873 Chris 800-315-9950 x600 ’96 548G John Deere - Skidder is in great working condition and working daily Motor recently rebuilt spent $9,000! 34 n
with approx 200 hours. Has new hydraulic pump and that was around 4-5,000! New turbo Rear end recently gone through Grapple cylinders recently packed New glass New rear tires on the back! Good winch Heat/ac works Everything works except radio This machine is ready to go! - Item ID-12864 - Chris 800-315-9950 x600 Bob Cat Skid Loader - Bob Cat T190 skid loader,4653 hours. - Item ID-12922 Keaton 800-315-9950 x606 Case 1H Skid Loader - Case 1H Skid Loader, model 70XTS11, 2890 hours. - Item ID-12923 - Keaton 800-3159950 x606 Case 580M - Case Backhoe 580 Super M, S/n JJG0374975 Hours 7270. - Item ID-12924 Keaton 800-315-9950 x606 Cat 518 Grapple/winch Skidder - Late 80’s 4WD
The Original Lumberman’s Exchange
1995 Valmet 503 w/Koehring 16” Saw Head Totally Rebuilt! Item ID: 12545 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 Keaton 800-315-9950 x606 Cat 988B Loader (2 available) - 2 988B Cat loaders. One with 9282 hours, the other hours not recording. - Item ID-12915 - Keaton 800-3159950 x606 Caterpillar Excavator Model 235 - Caterpillar Excavator Model 235, 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 Keaton 800-315-9950 x606 Dorsey Drop Deck Trailer - 45’ Long. Heavy Duty Ramps. Good Michelin Tires. Currently in use and has carried (2) Cat 518 skidders with no problem - Item ID12662 - Tom 800-315-9950 x604 Franklin Skidder - 2003,Model Q70-M31A,Enclosed Cab W/ Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 Tom 800-315-9950 x604 JD 643D Saw Head FB Decent machine. Estimated 1993 model. Serial number
‘10 Komatsu PC2200LL Log Ldr Item ID: 12948 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
available for verification. Recent JD recon engine. Tires at 60%. Cameco Saw Head. Needs new teeth. AC works. Running today. Priced to move. - Item ID-12845 Tom 800-315-9950 x604 John Deere 440B Cable Skidder - John deere 440 series B cable skidder has had new repower engine works fine ready to skid wood new seat syncro range transmission not power shift. Tires 16/9-30 - Item ID-12644 Keaton 800-315-9950 x606 John Deere 648G III - It has around 10,600 hours. New engine installed at 5,000 hours. We repacked all 4 boom cylinders and the 2 grapple cylinders. All new rods were installed in these cylinders. A/C system (condenser) has been cleaned. Seat has been recovered. Brake valve resealed. New fan belt. New idler pulley. Hoses were changed as needed. This is a clean tight machine ready to work. - Item ID-13009 Keaton 800-315-9950 x606
MISCELLANEOUS
Kubota Utility Vehicles Kubota Utility Vehichles RTU900. Four (4) available. Hours on each are 1350, 1005, 1105, 1209. $7,000.00
Visit us online at www.LBXonline.com!
each. - Item ID-12917 - Keaton 800-315-9950 x606 Thurman Scale - thurman 60’ by 10’ above ground scale,model 8530 60 ton capacity.Including all electrical controls and monitor - Item ID-12698 Keaton 800-315-9950 x606 Toledo Truck Scale - Toledo 10x35 truck scale with monitor, frame, indicator and printer. - Item ID-12921 Keaton 800-315-9950 x606
MOULDERS
’93 Pinheiro Moulder Planer - 1993 Pinheiro Moulder Planer, 5 heads model 600/5, approx. 100 hours, Max capacity 6”x18”, Bottom motor 12hp, top motor 18hp, feed 3hp, side motor 9hp, Used for Log siding and crown moulding. - Item ID12554 - Keaton 800-315-9950 x606
Great for Processing Crosssties
PLANERS
Buss 24x8 planer Model H - Buss 24x8 planer Model H - Item ID-12609 - Keaton 800315-9950 x606 Yates American Planer Yates American Planer, model# 820-12, infeed deck, duct work to main line included, pineapple roller feed, currently up and running - Item ID-12556 Keaton 800-315-9950 x606
PORTABLE SAWMILL
Timber Harvester HD-30 powered by a 25-hp Kohler gas engine. It is a 2005 year model with approximately 400 hours. Runs great and comes with 2 boxes of blades - Item ID-12009 - Keaton 800315-9950 x606
RECYCLING EQUIPMENT
2006 W. S. M Brute Horizontal Grinder - 2006 West Salem Machinery Brute Horizontal Grinder; Model 3456HB. This is a tier
2 machine and meets all current California emission standards. Equipped with a Cat 540 horse power C-15 diesel engine. This unit has been serviced and well maintained. It has approximately 8700 hours. The clutch and electronic
brain have been recently replaced. Located in CA. Priced to sell!! - Item ID-12691 - Tom 800-315-9950 x604 Finley Screener - 2004 Finley 883 screener. - Item ID-12927 - Keaton 800-315-9950 x606 2002 Dynamic Chipping/Leaf Collection System - Brand
For Classifieds Call Your LBX REP at 1-800-315-9950
new but without warranty. 185 HP Cat Engine. HeavyDuty Mlti-Task Prime Carrier; Hydrostatic 4 - Wheel Drive; Year-round utility. INCLUDES TWO DRUMS: One for Chipping, One for Leaf Picking. Picks up leaves at a rate of 40 cubic yards/ November 2013 n 35
MDI probe 2100
Portable Industrial Metal Detector Simple to operate –
just turn on and go! MDI’s Superior Digital Technology will detect an 8d nail buried 15" into a log! • Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal
‘04 Log Max 9000 Proc. Head
Item ID: 12929 Rebuilt Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
“Providing a full range of industrial metal detectors since 1965.”
36 n
Item ID: 13018 Contact: Tom 800.315.9950 Ext. 604
www.LBXonline.com
P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com
hour or more; An efficient, intelligent approach to big municipal jobs; Tight turning radius -- steers like an articulated machine; Rugged heavy duty construction; Simple to operate -- easy to maintain. This is a steal!! Item ID-12650 - Tom 800-3159950 x604 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30” whole trees. Set up for 2” chips. Recently came off job. Well maintained and in good condition. - Item ID-12690 Tom 800-315-9950 x604 2006 Morbark 18 Hurricane Chipper w/Loader - Good
‘06 Peterbilt Log Truck
running portable chipper equipped with loader. JD 6068 engine with 250HP. Hydraulic swivel Discharge Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has 2 new tires. - Item ID-12964 Tom 800-315-9950 x604 2006 Morbark 6600 Horizontal Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE
The Original Lumberman’s Exchange
‘96 CAT D5H XL Dozer Item ID: 13021 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin - $20,000 which is half price of new. - Item ID-12692 - Tom 800-3159950 x604 2007 Bandit Model 3680 Beast Grinder - 2007 Bandit Model 3680 Beast Grinder; Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN Controls;
Magnetic head Pulley; Excellent condition! - Item ID-12628 - Tom 800-315-9950 x604 2007 Dynamic 580 Chipper Cummins 365 HP. 1900 hours. Feed deck. Remote control. 22” capacity. New knives and anvils. Great biomass unit for tops and limbs. Priced to make sense! Conehead design makes great chips. - Item ID-12976 - Tom 800-3159950 x604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30 ft. x 10 ft CAT chain infeed bed. Enclosed
Visit us online at www.LBXonline.com!
weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckle boom loader, 25 ft reach, 210 degree swing. Bypass grapple. Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. - Item ID-12449 - Tom 800-3159950 x604 2007 Peterson Model 4800E Portable Debarker - Good running machine and very well maintained. 9950 hours approximately. CAT 3306 Engine. $40,000 in recent maintenance with records from owner. Great unit for making clean chips. - Item ID-12941 - Tom 800-315-9950 x604 2008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. - Item ID-12694 - Tom 800-315-9950 x604 2009 Bandit 3680 Beast Recycler - Like New Grinder with only 740 hours. CAT C-18 Diesel with 700HP. 42” diameter cut radius x 63” wide cuttermill. Mill opening is 35” high x 60” wide. Standard specs available upon request.
Optional HP600 Twin disc fluid clutch with high drives. Height adjustable discharge. Reversing engine fan option. Owner shut down job and wants to sell. - Item ID-12714 - Tom 800-315-9950 x604 2010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID-12501 Tom 800-315-9950 x604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head - 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head; Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads at 95%. Like New! - Item ID12633 - Tom 800-315-9950
(3)
Bliss Pellet Mill
Great Condition and Price!
Item ID: 12717 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
x604 2010 Woodsman 440TL Tracked Chipper w/Loader ONLY 1700 hours. Contractor finished job. Operator controls entire operation from cab. 700 HP Cummins engine. 50” mill. High flotation 36” triple grouser pads on 80% undercarriage. Super Package. Sold new at
For Classifieds Call Your LBX REP at 1-800-315-9950
‘95 Entyre Low Boy Trailer Low Price Item ID: 12946 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
over $500,000. - Item ID-12665 - Tom 800-315-9950 x604 2011 Fecon FTX100 w/ a BH74ssv mulcher head - 233 Hours. Comfort cab with Heat/AC. 100HP Cummins engine. Total mulching package. Includes Fecon BH74 mulching head with 6’ cutting width. Priced well below dealer cost. - Item November 2013 n 37
‘06 JD 310 Loader/Backhoe Low Price! Item ID: 12464 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
ID-12675 - Tom 800-315-9950 x604 Extec Shredder - Extec shredder. - Item ID-12926 Keaton 800-315-9950 x606 Morbark 1200 Tub Grinder Morbark 1200 Tub Grinder. Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are unknown. - Item ID-12919 - Keaton 800-3159950 x606
ROLLING STOCK
1989 International Clean Up Truck with a 2004 Serco 8000 Loader - 1989 International Clean Up Truck with a 2004 Serco 8000 Extenda boom Loader, 466,021 miles - Item ID-12601 - Keaton 800-3159950 x606 1997 Ford L9000 Log truck - 425hp cat engine, 260,000 miles, 8LL Trans., 46 rears, double frame, 28ft Log Bed with 4 sets of bunks - Item ID12602 - Keaton 800-315-9950 x606 1997 Ford Tree Trimming Truck - 1997 Ford Tree Trimming Truck, 99,572 38 n
2010 Prentice 2280 TMS Loader Package Item ID: 12871 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
miles, Altec Boom, 5364 hours - Item ID-12605 Keaton 800-315-9950 x606 2001 Sterling Clean Up Truck with a Serco Loader - 2001 Sterling Clean Up Truck with a Serco Loader, 190,000 miles, - Item ID-12600 Keaton 800-315-9950 x606 2005 Kenworth T-800 with Rotobec MT27 Loader 2005 Kenworth T-800 with Rotobec MT27 Loader, One Owner Truck, 110,000 miles, 8LL Trans, 46,000 lb rears, Full locking rears, Factory double frame, 430hp engine - Item ID-12612 - Keaton 800315-9950 x606 2005 Western Star with a 2009 Lemco 75XLT Loader - 2005 Western Star with a 2009 Lemco 75XLT Loader, 120,000 miles, 475 hp cat engine, 18 speed trans., 46000lb rears - Item ID-12598 - Keaton 800-315-9950 x606 2009 Peterbuilt Clean Up Truck with a 2009 Serco 8500 extenda boom Loader - 2009 Peterbuilt Clean Up
The Original Lumberman’s Exchange
‘00 Prentice 625ATL Loader Item ID: 12898 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Truck with a 2009 Serco 8500 Extenda Boom Loader, PW, PL, Leather interior, Wood Grain dash, 576,990 miles - Item ID-12597 - Keaton 800315-9950 x606 Several Timberjack Rear ends will fit models 450, 360, 460, 380 - Several Timberjack Rear ends will fit models 450, 360, 460, 380. These axles are priced cheap and we can bundle them if needed. - Item ID-12603 - Keaton 800-3159950 x606
SAWMILL
1984 Lane Model 8400 Saw Mill - Heavy duty four 14í (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame. Surprisingly good condition! Great Value at this price!! Item ID-12689 - Tom 800-3159950 x604 1989 Wood-mizer LT-40 - 1989 Wood-mizer LT-40, 25hp engine, blade sharpener, blade alignment tool, lots of extra blades - Item ID-12869 Keaton 800-315-9950 x606 1998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50
2003 Franklin Q80 Grapple Skidder Item ID: 12450 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
series Detroit power unit; Fully automatic; Cab a/c ; Live deck 30 ft; 1 live off bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! Item ID-12461 - Tom 800-3159950 x604 2002 Wood-mizer LT300 2002 Wood-mizer LT300, 30hp electric motor, 3 phase, 1 1/2 inch band, 6200 hours, recent rebuilt turner, new bearings on tapers, new cable, new decker, All maintance recently done. This mill is in very good condition and is currently up and running. - Item ID-12674 Keaton 800-315-9950 x606 “2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 500 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 -
Visit us online at www.LBXonline.com!
Tom 800-315-9950 x604 2012 D&L swing blade circular sawmill - Mill is powered by a 30 hp kohler engine with a 20’’circular blade with six carbide teeth that can cut verticle and horizontal. Mill is portable which runs on a track. Also have blade sharpener and slabbing attachment with a 60’’chainsaw bar for slabbing huge logs. Mill has less than 100 hours on it. - Item ID-12673 - Keaton 800-315-9950 x606 Gruendler Pulverizers - We have three (3) available. - Item ID-12918 - Keaton 800-315-9950 x606 Wood-Mizer LT-40 - Very nice WoodMizer LT-40. No leaks. Only needs muffler. Good working machine running today. - Item ID-12982 - Keaton 800-3159950 x606
SHAVING EQUIPMENT
2009 Salsco 30 Shaving Mill - 2009 Salsco 30 in. Shaving Mill, 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Tom 800-3159950 x604 2011 HWP Shaving Mill - 2011 HWP Shaving Mill, 24”x48” box, pto drive, 15 to 20 cubic yards per hour, 20’ Loading conveyor, 1 head 12 knives, 3 extra set of knives, 60-65hp needed to operated. Item ID-12756 - Keaton 800-315-9950 x606 Jackson 16 4D Shaving Mill - 2003 Jackson shaving mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6 sets of knifes This unit is in excellent condition Also a Grizzly knife sharpener - Item ID-12796 - Keaton 800-315-9950 x606
TRANSFER DECKS
36’ x 8’ 3 strand Green chain with stops - 2hp 3phase electric motor - Item ID12596 - Keaton 800-315-9950 x606 42’ x 8’ green chain - with drives included - Item ID-12593 - Keaton 800315-9950 x606 80’ x 8’ 3 strand green chain with drive included - 80’ x 8’ 3 strand green chain with drive included - Item ID-12590 Keaton 800-315-9950 x606
November 2013
Bandit Model 3750 Bring Extra Versatility for Land Clearing Operations
I
n response to increasing demand for specialty land clearing equipment, Bandit Industries has enhanced its line of track carriers. Leading the charge is the all-new Model 3750. Designed to operate with extremely low ground pressure, this all-new machine can be equipped with either a mulching forestry mower head, or a hydrostatic stump grinding head. The Model 3750 combines the smaller size and lighter weight of the Model 3500 with the larger cab and forestry mower head of the Model 4000, and it rides on a CAT® 315 undercarriage with 800mmwide pads. This gives the Model 3750 a ground pressure of just 3.9 PSI. “We’ve had requests from numerous customers for a high-powered forestry mower that can better traverse soft and sensitive ground,” said Jason Morey, Bandit’s large and small equipment sales manager. “The Model 3750 was built precisely for this purpose, but it’s also proven to be an excellent machine for general-purpose land clearing thanks to the wide tracks and lower weight.” The Model 3750 is available with up to 275 horsepower and features an 84-inch wide Bandit-designed forestry mower than can mulch up to a height of 72 inches. Like
Press Releases all Bandit track carriers, the Model 3750 features a deluxe operators cab that includes a six-way adjustable seat, electronic controls with state-of-the-art monitoring systems, rear-view cameras, on-board audio systems, and full climate control for operator comfort in all environments. The Model 3750 cab tilts forward for convenient access to vital hydraulic systems, allowing for easy maintenance. An interchangeable 40inch diameter stump grinder wheel is also available. The Model 3750 joins an expanding line of dedicated land clearing machines from Bandit Industries. After an extensive period of field evaluation, the compact Model 3000 is also gaining considerable popularity as a lightweight, highly mobile land clearing machine ideally suited for construction site and right-of-way clearing where space is limited. Featuring up to 142 horsepower, a dedicated 72-inch wide forestry mower and a CAT 307 steel-track undercarriage, the Model 3000 can easily power through material while reaching areas difficult to access with larger machines. “What we’ve been hearing most on the Model 3000 is its usable power and capability compared to its size,” said Morey. “Most machines using a mulching head of this size have less horsepower. With the CAT undercarriage and available power, there really isn’t any other clearing machine in the same category as the Model 3000.” The Model 3000 and Model 3750 join the Model 3500, Model 4000 and Model 5000 in Bandit’s track carrier lineup. All are ROPS/FOPS/OPS certified and feature CAT steel-track undercarriages. Intermediate-scale land clearing operations are ideal for the Model 3000 and Model 3500, while the Model 4000 and Model 5000 specialize in large scale clearing operations. The Model 3750 fits neatly in the middle, delivering a perfect combination of power, productivity, maneuverability and class-leading flotation to land clearing professionals. Learn more about Bandit’s line of track carriers and other land clearing machines at www.banditchippers.com or by calling 1-800-952-0178.
If you would like more information about Bandit please call (800) 952-0178.
For Classifieds Call Your LBX REP at 1-800-315-9950
November 2013 n 39
The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.
Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track
Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.
Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376
-66 B k c lly Tra t Do w r e o N sp ran T with
40 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!