Lumbermens Magazine December 2018

F R E E

E Q U I P M E N T

L I S T I N G S

Over 40 Years!

498 Eight Mile Road | Remus, MI 49340 Phone: 989-561-2280 | WWW.TRELAN.COM

BUY FACTORY DIRECT: PARTS & CHIPPERS Chippers With Tier-3 Engines Available

Factory Direct Inventory Blowout Sale at Remarkably Low Prices!

Model 23-LRC

Model 786-WRC

BLOWOUT PRICE: $355,000

BLOWOUT PRICE: $480,000

Model 640-RC

BLOWOUT PRICE: $295,000

Model 686-WRC

BLOWOUT PRICE: $435,000

Model 646-WRC

BLOWOUT PRICE: $335,000

Some Models are New and Unused while others are Demonstrators with very low hours and are in like-new condition. No trades. Freight not included.

LL BUY A LAN TRE YOUR ACTORY F PARTS AND SAVE T DIREC $$$$$ $

TRELAN CHIPPERS ARE KNOWN FOR THE HIGHEST PRODUCTION RATES IN THE INDUSTRY!

If you are interested in a Trelan Whole Tree Chipper or Trelan Parts, contact us at: 989-561-2280 or Toll Free (877) 487-3526

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 380  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR** YEAR-END INVENTORY REDUCTION SALE NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Buy Before December 31 and SAVE BIG! Boonville, New York

www.starwebhosting.net/woodsmen/

Reduction Sale Items

The Tree that Started it All!

MONTICELLO Lumber Dip Tank

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

WEST PLAINS Resaw

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co REFORM Knife Sharpener

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MELLOTT Vibrating Conveyor

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to COOPER Scragg morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Sale Price

SOUTHWEST FOREST PRODUCTS EXPO CAT V160B 16,000 lb Diesel Forklift ......................................... $12,000 Fri, 25 August - Sat, 26 August SAMSUNG SL150 Wheel Loader (158 HP Cummins) ............. $22,900 Hot Springs, Arkansas INTERNATIONAL Boom Truck .................................................. $12,500 www.arkloggers.com PRENTICE 210B Stationary Electric Knuckleboom Loader .... $9,500 72ND ANNUAL GREAT LAKES $400 Commercial Ice Machine ............................................................... LOGGING & HEAVY EQUIPMENT EXPO High Bay Warehouse Lighting (approx. 30 lamps) ....................... $400 Thurs, 7 Sept - Sat, 9 Sept McDONOUGH 54" Linebar Resaw System ............................. $29,500 Escanaba, Michigan WEST PLAINS 400 Horizontal Resaw System ........................ $35,000 MID-ATLANTIC LOGGING & BIOMASS BREWCO EZ Cut Single Head Horizontal Resaw ..................... $3,500 Fri, 15Resaw Sept -........................... Sat, 16 Sept $5,000 Letson & Burpee 6' Air Strain Vertical Selma, North Carolina DIEHL SL 52 Straight Line Ripsaw ............................................. $5,500 www.midatlantic-logging-biomass MID-ATLANTIC NEWMAN G360 Tub Type Knife Sharpener ............................... $9,500 expo.com/ LOGGING & BIOMASS EXPO ARMSTRONG Circlesaw Stretcher ............................................ $2,500 KENTUCKY WOOD EXPO $1,500 HANCHETT 413 Bandsaw Sharpener ........................................ Fri, 15 Sept Sat, 16 Sept $2,000 WEINIG Profile Grinder ............................................................... Lexington, Kentucky ARMSTRONG Side Pro ............................................................... $2,500 http://www.kfia.org/ IMW Dual Side Grinder ................................................................ KentuckyWoodExpo.aspx $1,500 PRECISION Scragg ................................................................... $15,000 THEHeads PAUL................................ BUNYAN SHOW $7,500 CM& E Model 85 Left & Right Chip Fri, 6 Oct - Sun, 8 Oct AMERIMULCH Mulch Coloring Machine ................................... $9,500 Cambridge, Ohio IRVINGTON MOORE 3 Arm 8' Tilt Hoist .................................... $7,000 www.ohioforest.org MORBARK 640 Debarker .......................................................... $18,000 MORBARK 632 Debarker .......................................................... $15,000 MELLOTT Rosserhead Debarker ............................................. $15,000 Single Overhead Truck Loading System ................................... $4,000 MONTICELLO Lumber Dipping System .................................... $9,500 HMC 50BHP Hydrostatic Carriage B& Mfg . ............................... 18 Drive M&F.................................... Gauge .............................$9,500 28 CORLEY Bar Type Log Turner ....................................................... $500 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 Hylton 7 x 42 Edger ..................................................................... $4,000 Baker ...................................... 5, 7 Menominee Saw ..................... 29 Unknown Gang-Edger Combo ................................................... $2,500 30 Bell's Machining 27 Metal Detector's Inc. ..............$1,000 CORLEY 648 Edger..................... ..................................................................... BUSH 48"Force DropMfg Feed Chipper .................................................... Brute . ..................... 31 Midwest Sharpening..............$3,500 26 PRECISION 10 x 10 Chip $9,500 Buck Equipment (AIM)Screen ........ 36................................................ Morbark ..................................... 9 PROGRESS Wood & Bark Hog ................................................... $6,000 Corley Mfg .............................. 32 Multitek ................................... 12 JEFFREY 54WB Wood & Bark Hog ............................................ $8,500 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 WILLIAM C32 Wood Hog ............................................................. $8,500 40 CW Mill-ArmorHog .............. 17 Rotochopper............................$9,500 ARASMITH Wood & Bark Hog ....................................................

** INFO LINK**

The Lumberman's Exchange is published monthly by Woods ARMSTRONG Bandsaw Sharpener CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Industry's Most Trusted Source content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck HMC 2-Saw Trimmer with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel BM & M High Volume Screen is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator Low hours PENDU Pallet Board- Stacker on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

BREWERHD 6-Head Resaw 2010 Cardinal Carriage

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for PRECISION Scragg carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC HANNA Double Notcher

Row Electric ............................ 20

800-241-8983 Sawmill Exchange .................. 11

Select Sawmill ......................... 19

Ken Dickert, President

Smith Sawmill ........................... 4

Eric Doss 706-478-1581 Jim Lichucki 706-478-5498 Thomas Industrial Controls..... 10 Wes UnionDickert Grove Saw706-478-5893 & Knife.. 2, 37 The Paul Bunyan Show ......... 39

sales@benjones.com Universal Refiner ................... 23

** Financing Available **

WoodMizer ................................ l

www.BakerProducts.net

Don't See What You're Looking for Here? Search Our Complete Inventory at www.benjones.com 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

NEW BARKO 495B

2014 JOHN DEERE 748

2014 CAT 559C

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

2013 DEERE 643K

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder 2005 BARKO 13428 Victory Ln. //395ML PO Box 124 Adams Center, NY 13606

2009 TIGERCAT 720E

Item2013 ID: 14078 CAT 525C Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

2014 TIGERCAT 630E

2013 JOHN DEERE 643K

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on Item ID: 14073 2018 DELFAB DF703 BARKO 595BItem ID 20,000lb goose neck trailer. Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

JEWELL CARRIER

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

380  Issue 364

2013 BARKO495

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

- Pumps recently redone. 400 hrs

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

1995 Barko 775 B Feller Buncher

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

2014and TIGERCAT 620E manuals receipts. Purchased

2014 TIGERCAT 720E 1999 Barko 160D - new engine with

Sam x702

meter dont work. The last 2 owners

new for $32,500. Item ID 13865.

LOGGING EQUIPMENT BANDIT

50% or better. hp Cummins 2012 JOHN475 DEERE 437D

adjustable to single two way. Great

BARKO

1994 Barko 160B - Electric

with John Deere power unit with

automatice firewood processor

but electronic is available. 2017 option BARKO 930B Has Log Lift. Uses 4-way wedge

capacity!. Item ID 13421. Sam x702

2014 TIGERCAT 620E 13238. Chris x700

1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start

2014 JOHN DEERE 753J

a Chomper Model 16 PDA

Handles logs up to 32”. Uses

TIGERCAT - It has a 2013 353 Detroit diesel, 40 726E of a 4 cylinder Mercedes power inch insert tooth circle saw, 30 foot

Firewood Processor - This is

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

approximately 1500 hours. Hour

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item JOHN ID 13694. Sam x702 2015 DEERE 643L

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TA B L E OF CONTEN T S& HEADSAWS BANDMILLS SOUTHWEST FOREST PRODUCTS EXPO SUBSCRIPTION: Lumbermens, a trade newspaper for the The Tree logging, sawmilling, pallet manufacturing, and secondary wood manufacturing is free within the United States to thatindustry, Started qualifying manufacturers and industry suppliers. Please limit it All! your subscription to one free copy per company or mill location.

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

10 hours on this machine since it D E P A R T M Ehas N TS been rebuilt, it has a 24foot in

Hot Springs, Arkansas www.arkloggers.com

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES CHANGE OF ADDRESS: Send address to Lumbermens with 44 inch wheels, Book and all the blades and 1 spare LOGGING 36" blade), Pulleys on Bearing . Parts and Since 1986, Lumbermens has changes & HEAVY EQUIPMENT EXPO Magazine, P.O. 1916, Columbia, When possible, published a Box monthly circular TN 38402. short pop-up transfer to edger, where to order included. Item ID Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production please include an old address label.

Free Equipment Listings......................... 6

reaching sawmills, loggers, Escanaba, Michigan belted rollcase to clear slabs and 12846. Sam x702 machine, with air strain conveyers pallet makers, recyclers and REPRODUCTION AND RESPONSIBILITY: Advertisers are CHIPPERS cuts from sawline, log stop and that go up and down, with airbags, industrial responsible woodworking for the contents plants and claims of their advertising. LOGGING Precision & BIOMASS 58 Chip Pac - Single chute loader to drop logs MID-ATLANTIC onto carriage, Lumbermens accepts no responsibility for their claims. No worldwide. it includes two sets of Mcdonough

Deals of the Month................................ 16

EST

Ad Directory............................................ 38

Fri, 15 Sept Sept part of this publication may be reproduced or transmitted in log turner under heavy duty log - Sat, 16 loading system,. Item ID 12764. PUBLISHER pressure guides. Top Casting wheel any form or by any means, electronic or mechanical, including Selma, North Carolina stop and loader to deal with big Sam x702 Woods Publishing photocopying, recording or any information storage retrieval www.midatlantic-logging-biomass is supported on both sides. This logs onto carriage and track and Trelan Chipper - This is a remote MID-ATLANTIC system,ADVERTISING without permission of Lumbermens. Negatives, artwork, SALES expo.com/ LOGGING & BIOMASS EXPO an extremely accurate machine Significant new spare parts chipper that is has been totally rebuilt and other items submitted in Lumbermens are Morris Woodsfor publicationframe. the property of advertisers. Lumbermens owns material typeset in ve1y good condition, Cuts 130 to be negotiated separately . Item ID with about 840 hours except for the (888) 401-6367 ext. 704 KENTUCKY WOOD EXPO and/or designed by Lumbermens and reserves the right to its of morris@lumbermens.co 13198. Sam x702 V-12 Caterpillar power unit. New feet a minute also has CLT presses. Fri, 15 Sept - Sat, 16 Sept use outside of Lumbermens. Lumbermens will exercise every the Manual Four Head Block -Lexington, ManualKentucky clutches, disc, bearing, liners and MARKETING DIRECTOR precaution in writing, designing, and printing material contained Item ID 13876. Austin x703 Williams within. We John shall not be liable for omissions or typographical Four Head Block Mounted on custom chute. 23” in opening http://www.kfia.org/ S & W 125 Band Mill with and errors.(888) 401-6367 ext. 701 all steel carriage. Husk. Manual V-12 Cat with 750-800 hp rating. KentuckyWoodExpo.aspx

1986

LIST

SELL

EXCHANGE

BUY

SAVE

lS Month om ApriL

oodmIzer LT 40 j@lumbermens.co DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

The Tree MAILING ADDRESS

Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

EquipmEnt REpREsEntativEs EST 1986 Cambridge, Ohio EQUIPMENT REPRESENTATIVES cAll uS todAy foR All youR uSed www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. needS! CALL US equiPMent TODAY FOR ALL YOUR USED EQUIPMENT SamNEEDS! x702

FREE EQUIPMENTlistings! LISTINGS!2010 CALL –HD Carriage fREE EquipmEnt Call – Cardinal INFO(888) LINK** (888) 401-6367Carriages (Sawmill) - Cardinal 401-6367

CARRIAGES & DRIVES

LIST

SELL

EXCHANGE

BUY

SAVE

Carriage line it includes carriage

Ted Schultz

Walker Woods Sam B & B Mfg. ............................... 18 Wall M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage that Started AD Sales Columbia, TN 38402-1916 (888)33401-6367 (888) 401-6367 ST SELL EXCHANGE Y .............................. S A V E (888) B.BH.UPayne 16 401-6367 Meadows Mill, Inc. ................ drive, hyd pac for carriage, (888) 401-6367 d: 14061 (888) 401-6367 it All! Ext. 701 Ext. 707 Ext. 702 t: Austin x703 Baker ...................................... 5, 7 Menominee Saw ..................... 29 sawyers cab, computer controls, AD Ext. 704 ESUBMISSIONS S T 1986 Since 1986, Lumbermens has May abemonthly sent tocircular published JoHn deere morris@lumbermens.co reaching sawmills, loggers, pallet 548G3 makers, recyclers and industrial POSTMASTER woodworking plants worldwide. Send address changes to: Lumberman's Exchange P.O. Box 1916 PUBLISHER Columbia, TN 38402 Woods Publishing

The Lumberman's Exchange is DESIGN DIRECTOR published monthly by Woods Ted Monnin Publishing, P.O. Box 1916, Columbia, TN 38402. All rights ed PRice MAILING ADDRESS reserved. All editorial/ advertorial d: 14021 P.O. Box 1916 submissions are used at the t: Sam x702 Columbia, TN 38402-1916 discretion of the publisher and may (888) 401-6367 be edited for purposes of clarity and space. Although all efforts have AD SUBMISSIONS been made to ensure accuracy of May be sent to— content submitted by advertisers morris@lumbermensco.com and writers, the Lumberman's Exchange, its principles and POSTMASTER associates, are not held liable for Send address Reproduction, changes to: errors or omissions. Lumbermens Magazine in whole or part, is prohibited with Box 1916 out writtenP.O. consent. d: 14061 Columbia, TN 38402 ©2017 Woods Publishing t: J Williams x701

AbTeK 344b

Morris Woods

sam@lumbermensco.com

walker@lumbermensco.com

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

48" bottom saw and 36" top saw

STACKING RAC

chris Woods Morris 40 Woods, Ad Sales CW Mill-ArmorHog .............. 17 Rotochopper............................ Phone: (888) 401-6367 Phone: (888) 401-6367 CW Mill-Hogzilla 15 Row Electric ............................ 20 ext. 700 ................... ext. 704 Joe Ferrazzano Austin Woods Chris Woods Mark Laxton chris@lumbermens.co morris@lumbermens.co (888) 401-6367 Dyna401-6367 Products ........................ 35 Sawmill Exchange .................. 11 (888) (888) 401-6367 (888) 401-6367

Ext. 703 Ext. 700 Ext. 709 Empire Hydraulics ................... 8 Select Sawmill ......................... 19

chris@lumbermensco.com

austin@lumbermensco.com

Great Lakes Mfg. .................... 34

joe@lumbermensco.com Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ SALE ❘ l§ Austin Woods Phone: (888) 401-6367

r classifieds all toDay

teds@lumbermensco.com

Bell's Machining ..................... 27

morris@lumbermensco.com

Ext. 708

mark@lumbermensco.com

www.BakerProducts.net 800.S48.6914 I S73.663.7711

 24/7 SUPPORT  (888) 401-MENS NO. 5 401-MENS 0 SUPPORT ❘ L! Sam Wall Phone: (888) 401-6367

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Item ID 13198. Sam x702

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed CHIPPERS deck 20 foot out feed deck with PRECISION 58 CHIP PAC 44 inch wheels, and all the bells Single chute loading system. and whistles, its a production Item ID 12764. Sam x702 machine, with air strain conveyers COMPLETE SAWMILLS that go up and down, with airbags, it includes two sets of 2006 WOODMIZER LT300 Mcdonough pressure guides. Top This mill is currently running, Casting wheel is supported on and includes the sawmill, and both sides. This is an extremely cab. An incline conveyers, a accurate machine in very good transfer table and two sets condition, Cuts 130 feet a minute of roller tables. This mill saws 13428 also has CLTVictory presses.Ln. // PO Box 124 a million board feet or more Adams Center, NY 13606 of walnut every year. Max log Item ID 13876. Austin x703 CARRIAGES & DRIVES diameter 36in, Max Width of cut 25in, The width of the 2010 CARDINAL HD band is 1 1/2 Inches. Video of CARRIAGE CARRIAGES Cardinal Carriage line it includes it operating is available, and carriage with onboard log can be sent upon request. Item ID 13892. Austin x703 turners, carriage drive, hyd DRY KILNS pac for carriage, sawyers cab, computer controls, cabinet with MEC 12 X 38 ‘05 Gehl CTL 70DRYER electronic drives for carriage TRIPLE PASS DRUM Item ID:with JW-986495 knees, husk including 48” Comes trunnions, drum Contact: J Williams bottom saw and 36” top saw, drive, fan and cyclone. Ph: (888) 401-6367 x701 short pop-up transfer to edger, Item ID 13925. Austin x703 ‘83 John Deere belted rollcase to clear slabs and cuts from sawline, log stop 4850 MEC 12 X 42 chain conveyer, way splitter, on and loader to drop logs onto TRIPLE PASS8DRUM DRYER Item ID: 14073 20,000lb goose neck trailer. Item ID 12 x 42 Mec triple pass Drum Contact: Austin Dryer, comes with trunnions. 13916. Austin x703 Ph: (888) 401-6367 x703 Item ID Portable 13924. Austin x703 Best Value Log Splitter

with 1700 hours, in very good

PAQ II RESAW drum design. Can easily load 42’ condition. Easily produces high

quality chips with patented ‘Cone’ Makes 1 orproduce 2 cuts in one plane vans and 6 - horizontal 8 loads per

day. Item ID2013882. x703 Power: Two HP TEFCAustin electric motors

&xGANGS MaterialEDGERS Capacity: 8” 12” Brewco Saws Two Versatility: Rip 2-sided Brewco slabs, sizeSaws and 3-sided cants, 4-sided cants, in resaw excellent condition. Runs great. and boards Item ID 13644. Sam x702 Variable-Speed Feedworks: FIREWOOD PROCESSORS Hydraulic-powered rough-top belting 2010 Built Wood Processor andShop hold-down wheel - It has a 353 www.BakerProducts.net Detroit diesel, 40

800.548.6914 | 573.663.7711 inch insert tooth circle saw, 30 foot

380  Issue 364

DYNAMIC CHIPPERS - Small manufacturer in PA has

2004 JCB 441 WHEEL LOADER made the best valued log splitter. 3,509 hours on this machine, Handles logs up to Uses I have everything works as32”. it should. 13HP Honda available motor. Manual start many videos of it running, and can be sent upon request. but electronic option is available. Item 13888. Austin x703 Has LogID Lift. Uses 4-way wedge adjustable to single two way. Great

2008 DYNAMIC 585 CHIPPER Value! ID 12062. Samcone x702 This isPA.a Item 2008 dynamic Firewood Processor a head chipper with- This 1700is hours, in very good condition. Easily homemade processor with a 10’ produces high quality chips with log deck. Has a hydraulic grapple, patented ‘Cone’ drum design. chain and kicker that all runs off Can easily load 42’ vans and of a 4 cylinder produce 6 - 8Mercedes loads perpower day. unit. Has 4’ chain Austin saw thatx703 kicks Item IDa 13882.

Lumbermens  since 1986

❘

Item ID: JW-909632 FIREWOOD PROCESSORS Contact: J Williams 2010401-6367 SHOP BUILT Ph: (888) x701 WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703 FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, and ‘13 KMC 2500chain Track kicker that all runs off of a 4 Skidder cylinder Mercedes power unit. Has a 4’ chain saw that kicks off Item ID: 14078 onto a conveyor. Contact: Austin This is a very well Ph: built (888)processor. 401-6367 x703 Item ID 13820. Sam x702 PROCESSOR off FIREWOOD onto a conveyor. This is a very

This built is a Chomper 1613820. PDA well processor.Model Item ID automatice firewood processor with John Deere power unit Firewood - This is panel with lowProcessor hours. Control aincludes Chomper Model 16 tach, oilPDApressure, water temp and amp gauges. automatice firewood processor CutsJohn logsDeere up topower 16”. One with unit owner with and comes with all manuals and low hours. Control panel includes receipts. Purchased new for tach, oil pressure, water temp and $32,500. amp gauges. Cuts logs up x702 to 16”. Item ID 13865. Sam Sam x702

LOGGING One owner and EQUIPMENT comes with all manuals andBANDIT receipts. Purchased

2004 BANDIT BEAST new for $32,500. Item ID 13865. Sam x702 MODEL 4680

3412LOGGING Caterpillar EQUIPMENT Diesel engine with 850 HP. 5300 hrs. Mill in good BANDIT condition. Just finished 10 Acre 1999 Bandit 1900 Disc clearing job, readyTracked to work! Remote control. Big production capacity! Chipper - Cat Under Carriage at Item ID 13421. Sam x702 50% or better. 475 hp Cummins BARKO Diesel. 7500 Hours. One owner.

1994 BARKO Well maintained. Item 160B ID 13294.

Electric knuckleboom, 30’ boom, 75hp motor, Rotobec 2004 Bandit Beast Model 4680origicontinuous grapple, 5,000 3412 Caterpillar Dieselcondition). engine nal hours. (excellent Item Chris with 850ID HP.13238. 5300 hrs. Mill x700 in Sam x702

BELL good condition. Just finished 10

1990 BELL SUPER T Acre clearing job, ready to work!

This Bell has a brand new Duetz engine. Lever control, 33” bar,

Remote control. Big production

 List  seLL  exchange  buy  save

Ph: (888) 401-6367 x703 pump and tranny has been rebuilt not long ago. Hour meter is inop. New paint. Runs perfect. Has heat and air, it just needs to be fixed. Item ID 13896. Sam x702

1993 BELL SUPER T Good running condition. 33” Bar Saw. Tires at 50%. Deutz ‘95 John Deere C6 engine. Hour meter broken. Item ID 13543. Sam x702 Tree Farmer

ItemBELL ID: 13920 TREE CUTTER Contact: Austin Around 1000 hours on the Ph: (888) 401-6367 x703 machine. New air cooled motor

only about 300 hours. Rebuilt dangling head. Several bars capacity!. ItemMachine ID 13421. Sam and chains. camex702 off the job in February and is field BARKO ready. 1994 Barko 160B - Electric Item ID 13943. Austin x703 knuckleboom, 30' boom, 75hp CASE motor, Rotobec continuous

2006 CASE 440 SKID LOADER

grapple, 5,000 original hours. this With only 871 hours, (excellent machine condition.). starts, Item runs,ID and

operates like new. I have many 13238. Chris x700 videos available and can be sent 1995 Barko 775 B Feller Buncher upon request. Item ID 13886. Austin x703

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in 99’ CASE 850G LONG TRACK kohing head. DOZER head works great.

One ID owner machine, Item 13185. Sam x702

only 3300 original hours, has never 1999 Barko 160D - new engine with been used in the woods, it has approximately 1500 back, hours. Hour a ripper on the original meter work. The last 2carriage owners pads, dont and chains, Under is new along on have only usedwith it to new load rollers trucks or the bottom, and new sprockets. as a backup as needed. Has a CTR Item ID 13909. Austin x703 delimber, grapple has been rebuilt. CATERPILLAR Boom cylinders have minor leaks.

1994 CATERPILLAR 320 Dry machine that is in good 94 Barko 275 condition for- Excellent the year.value The stick and low bucket cylinder have with at hours at 3,500. 5.9 been repacked. continuous It has a thumb CUMMINS grapple.and bucket on it, also has a 230 Runs Great!. Item ID 13740. Sam Waratah processing head that x702 can be sold with it. Hours are around 19k, BELL motor has been replaced a couple back. 1990 Bell Super T - Thisyears Bell has is working daily.Lever aMachine brand new Duetz engine. Item ID 13936. Austin x703 control, 33” bar, pump and tranny Item ID 13694. Sam x702

❘

 LumbermensCO.com

1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain. Undercarriage is still in excellent shape. Fixed grapple and no winch. Item ID 13932. Sam x702

The Tree

1996that CAT 214 MOBILE Started EXCAVATOR it All!3 tons steel with 36’ magnet shear. low hrs! All hard has tires, Since 1986, Lumbermens 4published outriggers ideal for scrap a monthly circular business. It also has 48’ swavel reaching sawmills, loggers, pallet makers, recyclers and up. bucket for street ditch clean industrial plants Item ID woodworking 13441. Sam x702 worldwide.

1998 CATERPILLAR PUBLISHER 515 Publishing GrappleWoods with winch, no heat or air. Open cab skidder with 9800 ADVERTISING SALES hours. Tires are 28L’s, Morris Woodsrear 90% (888) 401-6367 704new and fronts are 30%ext. with bear morris@lumbermens.co paws chains. Item ID 13801.DIRECTOR Sam x702 MARKETING John Williams

(888) 401-6367 ext. 525B 701 2005 CATERPILLAR This is aj@lumbermens.co dual arch skidder with winch. DESIGN Very low hour skidder DIRECTOR Donna Heninger with 7900 frame hours and

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** CALENDAR**

only 63 hours on a new engine. EARLY 70’S CLARK 664 Continuous grapple, tires are CABLE SKIDDER 30.5’s @ 70%. This is a really some center slack, needs front nice skidder for the price. tires, comes with a spare tire. NY STATEGearmatic WOODSMEN'S FIELD DAYS Item ID 13816. Sam x702 19 winch doesn’t Fri, 18 hold August - Sun, August good. 45320 Detroit power New York 2007 CATERPILLAR D6N LGP Boonville, unit. www.starwebhosting.net/woodsmen/ DOZER ENCLOSED CAB Item ID 13629. Sam x702 JEM Overall: Cab Heat & AC, 150HP SOUTHWEST FOREST PRODUCTS EXPO Cat C6.6L, 90% Undercarriage, EXPORT LOG26 DEBARKING Fri, 25 August - Sat, August GPS Ready, Sweeps & Rear LINE Hot Springs, Arkansas Screen, 13’6” PAT Blade, 39,500 Reconditioned 35 Nicholson www.arkloggers.com LBS, Hours: 7,867 Horsepower: A-5 debarker, cab, infeed hour 150 S/N: ALY03028. rolls, log dischage belt with 72NDglass ANNUAL GREAT LAKES Item ID 13567. Chris x700 log kickers. Call 208-451LOGGINGside & HEAVY EQUIPMENT EXPO 0365 for details. Thurs, 7 Sept - Sat,$279,000 9 Sept 2000 CAT 515 GRAPPLE DEERE Escanaba,JOHN Michigan SKIDDER ‘92 JOHN DEERE 590 D One Owner Runs great! MID-ATLANTIC Is it an LOGGING & BIOMASS CUTTER excellent condition. Rubber is Fri, Will 15 Sept need- Sat, pads16inSept the future, around 75% Has new Hydraulic Selma, North Carolina sprockets and rails are about pump and Charge pump. www.midatlantic-logging-biomass 85%, it has a 4cyl JD motor. It MID-ATLANTIC Item ID 13616. Sam x702 LOGGING & BIOMASS EXPO has aexpo.com/ Rotnee dangle hd. w/ a bar CLARK saw and a spare idler. KENTUCKY CLARK RANGER 665D Item IDWOOD 13612.EXPO Chris x700 Tight and dry machine, rebuiltFri, 15 Sept - Sat, 16 Sept Kentucky motor. hour meter broken, It has Lexington, 1995 JOHN DEERE C6 TREE a 353 Detroit, with grapple, and http://www.kfia.org/ FARMER winch, always fires right up, andKentuckyWoodExpo.aspx Only 20 hours on a new 5.9 runs with no issues. Cummins engine. The whole PAUL has BUNYAN SHOWand line Item ID 13748. Austin x703 THEcenter been fixed, Fri, 6 Oct Sun, 8 Oct bolt redone, transmission is Cambridge, Ohio www.ohioforest.org

** INFO LINK**

tight, center pins are good. It CLASSIFIEDS hasFOR a full speed tranny, with two reverse, with a winch. Working Call 888.401.MENS daily. See pictures, and Item ID 13920. prices, Austin x703

Location of all equipment at 2004 648GIII JOHN DEERE www.LumberMB\ISmagazine.com

DUEL ARCH SKIDDER Slick Machine. Runs good motor BANDMILLS & HEADSAWS is in top notch condition. Danckaert Band Resaw - Roughly Item ID 13610. Sam x702 10 hours on this machine since it

has beenJOHN rebuilt,DEERE it has a 648GIII 24foot in 2004 This machine 13000 feed deck 20 foothas out feed decktotal hours on the body, with with 44 inch wheels, and all theonly 3000 hours on the new mobells and whistles, its a production tor, comes with a set of chains, machine, with air strain conveyers working daily. that go up down, with airbags, Item ID and 13878. Austin x703 it includes two sets of Mcdonough

2006guides. JOHNTop DEERE 700J pressure Casting wheel

DOZER is supported on both sides. This This work horse comes with a is an extremely accurate machine winch, and new undercarriage, inisve1y good Cuts 130 it tight andcondition, dry & running daily with feet a 4500 minutehours. also has CLT presses. Item 13883. Austin Item IDID 13876. Austin x703 x703 S & W 125 Band Mill with

2006 JOHN DEERE 748GIII Caterpillar generator - Low hours 8700 hours, running daily. onItem the mill, electronic computer ID 13881. Austin x703Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

2006 JOHN DEERE 15000 hours. Phone FIREWOOD PROCESSOR315.284.4126 Item ID 13910. Austin x703 This is a Chomper super 14, with Fax 315.849.2045 a 60hp engine. In very nice shape.Website 2003 FRANKLIN Q80 www.empirehyd.com Only 171 hours, comes with green GRAPPLE SKIDDER Email chain conveyer. of the manuals 7500 hours, but just 5000 hours “Precision UnderAll Pressure” info@empirehyd.com for the engine, and the chopper on reman engine. New Radiator; itself come with it, as well as all of New Hydraulic Pump; Comfort the electrical schematics. cab with good working heat and Item ID 13894. Austin x703 air; Tires at 80%. Item ID 12450. Sam x702 GRINDMASTER 2012 JOHN DEERE 548GIII Single arch with winch, blade SUDDRETH HORIZONTAL GRINDER extensions, 1 new 28L and 3 @ This is a 60 HP low rpm 50%. This is still a new machine Horizontal grinder, comes with a with only 3600 hours. blower, and the blower connects Item ID 13780. Sam x702 to the grinder with a pipe. It has top and bottom infeed rolls. 2009 JOHN DEERE 648H Overall lightly used, in really This is a one owner machine, good shape. Width capacity is every switch works, interior is around 30” maybe even wider. very clean, radio, heat/ac. Air Item ID 13889. Austin x703 ride works as it should. Tires HYDRO-AX are 30.5x32. Extremely clean 1998 HYDRO AX 611EX SAW machine with no leaks. Cutting HEAD FELLER BUNCHER edge on blade is excellent, with with about 8800 hours. Bunching no cracks or welds anywhere. Saw Head has large pocket for Item ID 13747. Austin x703 accumulation and lifting side shield 13428FRANKLIN Victory Ln. // PO Box 124 Adams Center, NY 13606 for notching larger trees before 1995 FRANKLIN 170 felling. Cummins engine. 28L tires Enclosed cab, single arch with a at 60%. Decent running condition. winch, new paint, 4 brand new Item ID 13245. Sam x702 23.126 firestone tires, around

2002 HYDRO AX 621E Arouund 12,000 hours on this machine. Working daily. Item ID 13884. Austin x703 1998 711EX SAW HEAD FELLER BUNCHER 30.5-32 tires at 40%; Cummins Engine rebuilt 1500 hours ago; ‘16 Halverson 8750 hours; Quadco H140 22” Large tree saw head.(DEMO) Heat and A/C Skidsteer work. New bearings in saw. Item ID: JW-909632 Cutting trees today. Contact: J Williams Item ID401-6367 13353. Sam x702 Ph: (888) x701 KMC

KMC TRACK SKIDDER 2500P John Deere Dual Arch Grapple, John Deere winch, Model 4000, Cummins Engine, Model 6BTA, Clark Transmission 28000. Item ID 13738. Austin x703 KOMATSU

2007 KOMATSU PC220LC w/2009 Log Max 7000XT processing ‘13 9700 KMC 2500 Track head. hours on carrier. 7200 hours on Log Max. Excavator style. Skidder Cab guard. Flotation pads. One Item Very ID: 14078 owner. good condition. Contact: Item ID Austin 13464. Sam x702 Ph: (888) 401-6367 x703 2008 KOMATSU D61-EX DOZER Great Condition. 4511 Hours. off onto a conveyor. This35% is a very Komatsu U/C at 95%. Pads. well built processor. Item ID 13820. Sam x702

Firewood Processor - This is FROM OUR FAMILY TO YOURS, a Chomper Model 16 PDA

‘05 Gehl CTL 70

Item ID: JW-986495 WISH YOU Contact: J Williams Ph: (888) 401-6367 x701

a Merry Christmas

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

automatice firewood processor

20,000lb goose neck trailer. Item ID Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

tach, oil pressure, water temp and One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at

Well maintained. Item ID 13294.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

❘

2007 LIEBHERR A924C LOG HANDLER RUBBER TIRED LOG LOADER 13,000 hours. 40’ C6 Reach ‘95 John Deere with two section boom. 60” Tree Farmer Log Grapple with continuous rotation. Cab Riser with Item ID:Fixed 13920 cab guard protection. Contact: Austin Front push blade. Tight401-6367 and dry. x703 Cleaned, Ph: (888) Serviced, and Checked out for service. Can pull loaded trailer. 4-Wheel Item drive and Sam steering. capacity!. ID 13421. x702 Top Quality machine. Would be BARKO great for log yard or mill work. 1994 Barko 160B - Electric Item ID 13476. Sam x702

low hours. Control panel includes

adjustable to single two way. Great

Lumbermens  since 1986

LIEBHERR

- Pumps recently redone. 400 hrs A PRODUCTIVE

with John Deere power unit with

better. 475 hp Cummins THANK YOU FOR50% AorGREAT 2018, Diesel. 7500 Hours. One owner.

Has Log Lift. Uses 4-way wedge

Chopsaw | Model Multi-Head inch insert tooth circle saw, 30 C foot unit. HasResaw a 4’ chain saw that kicks 380  Issue 364

2012 KOMATSU D61EX 15 DOZER with only 750 Hours. Triple Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; ‘93 Barko 180B Undercarriage at 90%; Excellent Item ID: 14077 Condition! Contact: Item ID Austin 13459. Sam x702 Ph: (888) 401-6367 x703 2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition. Item ID 13937. Austin x703

NEW & YEAR

chain conveyer, 8 way splitter, on 13916. Austin x703

6 Way Blade. Fully Enclosed comfort cab. Great price! Item ID 13570. Sam x702

Sam x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

good. in good working order. 22in Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

3665D Sawmill | Double Notcher control, 33” bar, pump and tranny Remote control. Big Model production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

2011 LIEBHERR A904 RUBBER TIRED LOG HANDLER Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Can pull loaded trailer. Cleaned, serviced and inspected. The TightTree and dry and ready for work. Located in that Started Baltimore, MD. it All! Item ID 13477. Sam x702 Since 1986, Lumbermens has 2011 LIEBHERR A924 published a monthly circular RUBBER TIRED LOG reaching sawmills, loggers, pallet makers, recyclers and HANDLER industrial woodworking Liebherr 4 cylinder plants engine worldwide. with great fuel economy.

11,230 hours. Fixed cab PUBLISHER Woods Publishing riser. Two section boom with 38’ reach. Cab protection. ADVERTISING SALES 4-Wheel Morris driveWoods and steer. 401-6367 ext. 704 Push (888) blade. Can pull loaded morris@lumbermens.co trailer. Cleaned, serviced and inspected. TightDIRECTOR and dry and MARKETING ready forJohn work. Located in Williams (888) 401-6367 ext. 701 Baltimore, MD. Itemj@lumbermens.co ID 13478. Sam x702 DESIGN DIRECTOR Donna Heninger

** CALENDAR**

1999 MORBARK 1400 TUB GRINDER 1997 LINKBELT 3400 HAS Loader w/Cab; 4200 hours; Very REBUILT PIERCE STROKE good condition. in PA. DELIMBER NY STATE WOODSMEN'SLocated FIELD DAYS Item ID 13361. Sam x702 36” Pads on 60% undercarriage. LINK-BELT

Fri, 18 August - Sun, 20 August

5221 hours. Good running Boonville, New York 2006 MORBARK 6600 condition. Owner just www.starwebhosting.net/woodsmen/ spent HORIZONTAL GRINDER $30,000 on upgrading delimber. Approx. 6000 hours on this Item ID 12992. Sam x702 SOUTHWEST FOREST PRODUCTS EXPO well maintained machine. MORBARK Fri, 25 Has August Sat, 26 August New Cat Dealer Rebuild Hot Springs, Arkansas 1987 MORBARK 27 WCL 1000HP Engine at 5000 hours. www.arkloggers.com NEEDS MOTOR 42” X 66-5/8” Hammermill; Morbark 1000 Knuckle variable speedLAKESinfeed 72ND ANNUAL GREAT boom loader, 3 knife disc, system; Hammermill drive & HEAVY EQUIPMENT EXPO Newer discharge LOGGING chute, includes all belts, sheaves, Thurs, 7 Sept - Sat, 9 Sept New banding around disc, bushings Michigan & shields. Engine Brakes and tires are also OK, Escanaba, gauge panel & emergency Everything works well Newer shut down system located MID-ATLANTIC LOGGING & BIOMASS clutch -- with outboard in an -anti-theft 15 Sept Sat, 16 Septconsole. bearing, Had Cummins KTTAFri, Electronic sensor & auto Northrpm Carolina 750 HP engine -- needs Selma, feed system. 430 Gallon fuel www.midatlantic-logging-biomass repower. MID-ATLANTIC tank. 238 Gallon hydraulic oil expo.com/ LOGGING & BIOMASS EXPO Item ID 12443. Sam x702 tank. IQAN control system. Dust suppression system. Hyd KENTUCKY WOOD EXPO 1997 MORBARK MODEL operated debris containment Fri, 15 Sept - Sat, 16 Sept 2400 CHIPPER door. 16 Function radio remote. Lexington, Kentucky Has a Cumins diesel engine Super package! Optional new http://www.kfia.org/ and runs great. All fluids knife skin - $20,000 which is KentuckyWoodExpo.aspx and filters have been half price of new. changed. ItemBUNYAN ID 12692.SHOW Sam x702 THE PAUL Item ID 13429. Sam x702

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

MORBARK 1200 TUB GRINDER FOR CLASSIFIEDS Powered by a 3412 Cat engine, 600-hp. Tilt tub. Call 888.401.MENS Hours are unknown. Please SeeDaren pictures, prices, andfor call at Ext. 702 Location of all equipment at more details. Item ID 12919. Sam x702 www.LumberMB\ISmagazine.com WOLVERINE

BANDMILLS & HEADSAWS 1995 MORBARK WOLVERINE 3-WHEELED FELLER Danckaert Band Resaw BUNCHER - Roughly S/N 4073. Only 1000 hours 10 hours on this machine since it on new JD 4 cylinder engine. has been rebuilt, it has a 24foot in Recently replaced turbo. 23.1 feed 20 foot feed Buncher deck tiresdeck at 50%. 16”out Rapid with wheels, and allisthefast shear44 inch head. Machine and in very good condition. bells and whistles, its a production Item ID 12531. Sam x702 machine, with air strain conveyers PRENTICE that go up and down, with airbags,

1988 PRENTICE 210B New battery and starter a year pressure Top Casting wheel ago, newguides. alternator less than 2 is supported on both sides.rotation This years ago. Continuous grapple, hasaccurate 3-53machine detroit is an extremely engine, lever controls, plumbed in ve1y good condition, Cuts 130 for bucksaw. Mounted on a feet a minute also has CLT presses. 1978 GMC Brigadier with 6-71 Item ID 13876. x703 Runs detroit with aAustin 10 speed. S & W 125 Band Mill with everyday. Item IDgenerator 13703. Sam Caterpillar - Lowx702 hours it includes two sets of Mcdonough

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

When You Buy Your B.H. Payne CARRIAGES & DRIVES You’ve Bought the best... We Guarantee It!

** INFO LINK**

Sam x702 From Circular Saws

2010 Cardinal HD Carriage

B & B Mfg. ............................... 18

Carriages (Sawmill) - Cardinal Traditional Quality Combined Carriage line it includes carriage With M&F Gauge ............................. 28 Todays Technology

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

with onboard log turners, carriage

Call 800 752-0627

Quality Brand Reg. U.S. Pat Off

drive, hyd pac for carriage, Circular Saws Make Sure29To Ask For Our Free, Sawcontrols, Catalog Saw Bits andSaw Shanks..................... Menominee sawyers cab,Complete computer

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth cabinet with electronic drives for MetalCarbide Detector's Inc. .............. 30 Tipped Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Carbide Strobe ® Saws carriage knees, husk including Midwest Sharpening 26Bits & Shanks, B.H. Payne & Company .............. Stock & Sell Carbide Tips, Diamond Wheels, 48" bottom saw and 36" top saw Saw Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Corley Mfg .............................. 32

Here’s ................................... What You Get With Every Multitek 12 B.H. Payne Saw

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

May be sent to morris@lumbermens.co

POSTMASTER

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

‘1

Ite Co Ph

‘04 Woodmizer LT70 Hydraulic 1988 John Deere • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

Morbark ..................................... 9

STACKING RAC

Item ID: 13940 • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. 440D

Dyna Products ........................ 35

Contact: Austin • We Tension BEFORE Leaving Our Factory. Item# 13781Your Saw to Your RPM Speed Ph: (888) 401-6367 x703 Row Electric ............................ 20Guaranteed. • Your Satisfaction - Completely Contact: Sam Ph: (888) 401-6367 x702 11 Sawmill Exchange ..................

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hurst Boiler ............................. 14

P.O. Box 90608 East Point, GA 30364 The Paul Bunyan Show ......... 39 404 761-8711 Thomas Industrial Controls..... 10 Fax 404 761-5398

‘0 Tr Lo

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Ite Co Ph

Lignomat ................................. 24

WoodMizer ................................ l

CW Mill-Hogzilla ................... 15

Hahn Machinery ...................... 3

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

B.H. Payne & Company, Inc.

“Since 1890”

Trelan Chipper

Item ID: 13866 www.BakerProducts.net Web Site: www.paynesaws.com 800.S48.6914 I S73.663.7711 Contact: Sam Ph: (888) 401-6367 x702  24/7 SUPPORT  (888) 401-MENS NO. 9 401-MENS 0 SUPPORT ❘ L!

E-mail: info@paynesaws.com

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

Mud Tracks. Front blade. Hood

War

Com

1050 and

used

wer

ill

1992 PRENTICE 210D LOADER Phone inders and valve body. This Excellent condition, very tight loader has only been used to cut 315.284.4126 loader mounted on a 1989 Faxup logs into 9’ lengths. Never 315.849.2045 Mack truck with very good tires.Website used as a delimber loader. www.empirehyd.com Item ID 13654. Sam x702 Item ID 13784. Sam x702 “Precision Under Pressure”

Email info@empirehyd.com

1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup. This loader is used to feed a chipper. Item ID 13795. Sam x702

1999 PRENTICE 210E Comes with a bucksaw. Levers, 11000 hours. Repacked all cyl-

2014 PRENTICE 2384C LOADER PACKAGE with CSI 264 Ultra Delimber and Rotobec 4048 Grapple. Only 1050 hours! Mounted on trailer with hydraulic stands. Excellent condition. Contractor shutting down job. Item ID 13577. Sam x702 2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way

around and has 6,000 hours on the machine. Item ID 13382. Sam x702 PRENTICE 310E Good loader for the money. Item ID 13762. Sam x702 PRENTICE 120C BOOM TRUCK

‘16 Halverson Great tires, new paint,H140 & lights, with a 350 Cummins Engine 3 Skidsteer (DEMO)

stage Itemjake. ID: JW-909632 Item ID 13900. Austin x703 Contact: J Williams Ph: (888) 401-6367 x701 1994 PRENTICE 180D LOG LOADER 11,793 hours, Machine is in good condition, it has been sand blasted and painted, low pro

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Promotional Pricing Offer

Firewood Processor - This is

Simonds Red Streak Hard Back ‘05 Gehl CTL 70 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2” Contact: J Williams

im e Ph: (888) 401-6367Tx701

‘83 John Deere 4850 Tell us you saw it here!

$14.71 $14.27 each

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

O n ly

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

380 Lumbermens  Issue 364 ❘ - Cat List exchange it buy  to save arch with winch. Low hours on  since Cat 1986 D5B Dozer D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

210 PRENTICE LOADER MOUNTED ON 2006 TRAILER Excellent condition. Item ID 13505. Sam x702

‘93 Barko 180B

LATE 80’S PRENTICE 210 LOADER Item 14077 This is ID: a late 80’s model, it had Austin aContact: new motor installed 2 years Ph:with (888) 401-6367 ago around 3,000x703 hours on it, also comes with a circle saw. Item ID 13879. Austin x703 1998 PRENTICE 210E It has the 600 turbo charged cummins engine, control valves have been redone, ac/heater work, it also has slasher saw hook ups. Dry machine, working daily. ‘95 John Deere C6 Item ID 13913. Austin x703

TreeROTOCHOPPER Farmer

PIPER’S Saw Shop

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

tires 17.5. Item ID 12759. Sam x702

22X380, direct drive, EROPS,

job site and put it to work to up

2011 ROTOCHOPPER ItemMC266T ID: 13920 This is a great chipper with only Contact: Austin 3600 hours.401-6367 It has a 500hp Ph: (888) x703C15 Caterpillar power unit. Comes with spare bolts, teeth, screens and bearings. capacity!. Item ID 13421. Sam x702 Item ID 13837. Sam x702

BARKO

1994 Barko 160BROTOCHOPPER - Electric 2014 B66TD

knuckleboom, boom, This machine is30'still like 75hp new with only hours on rotor and motor,1300 Rotobec continuous 1600 on 5,000 engine. This ishours. a track and grapple, original dolly system, which makes it easy (excellent condition.). Item ID to move. Has a magnetic head 13238. 48” Chris x700with 28 teeth and roller, rotor BarkoC-18 775 BCaterpillar Feller Buncher a1995 700hp power unit. This rotochopper sells - Pumps recently redone. 400 hrsfor over $600,000.00 new. on injection pump. always started Item ID 13838. Sam x702 good. in good working order. 22in TIGERCAT kohing head. head works great.

2000 TIGERCAT 845B Item 13185. hrs. Sam the x702 Hydraulic it hasID8900 1999 Barko 160D new engine Pump haIGERCATs 2000 hrswith on it. We replaced sawHour pump approximately 1500the hours. last summer. Ready meter dont work. The to lastgo! 2 owners Item ID 13619. Sam x702 have only used it to load trucks or

as a backup as needed. Has a CTR 2000 TIGERCAT 845B

delimber, grapple been rebuilt. This 845B has has 14000 frame hours with 5000 hours on Boom cylinders have minor leaks. an 8.3 cummins engine. New Item ID 13694. Sam x702 sprockets, bottom and top 94 Barko 275 - Excellent value rollers, rails, idlers, 36” tracks, with low at 3,500. seat andat hours all new A/C5.9parts. CUMMINS continuous Track adjusters, and allgrapple. cylinders on have repacked. Runshead Great!. Item been ID 13740. Sam Comes with a 22” hotsaw with x702 45 degree rotate. This is a very BELL clean cutter, owner just wants 1990 Bell Super T - This Bell has to update. a brand Duetz engine. Lever Itemnew ID 13939. Sam x702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

2004 TIGERCAT 240B KNUCKLEBOOM New 5.9 cummins crate engine with 2500 hours, turntable good, 243 CSI delimber, good tires, brakes, and lights. 7500 hours. Item ID 13666. Sam x702 2004 TIGERCAT 620C Single arch, new engine 2 months ago, hasTree about 13,500 The hours, needs a couple of that Started windows. Tires at 50%. it All! Item ID 13667. Sam x702 Since 1986, Lumbermens has 2004 TIGERCAT 630C published a monthly circular New 35.5’s on rear and 25% reaching sawmills, loggers, pallet makers, recyclers on front, comes with 2 and spares. industrial plants Engine haswoodworking 4500 hours, with worldwide. 12000 machine hours. Two new

wiring harness. PUBLISHER Publishing Item Woods ID 13749. Sam x702 ADVERTISING SALES 2004Morris TIGERCAT 845B Woods 401-6367 704 with (888) Waratah 622 ext. Processor. Newmorris@lumbermens.co screen, wheels, sprockets and wheel motor. MARKETING DIRECTOR Owner used it for a month John Williams (888) 401-6367 701 hrs. before parking it. ext. 5,000 on 8.1 j@lumbermens.co cummins engine, and 6990‘06 total hrs.DIRECTOR DESIGN Brewco B1600 Donna Heninger Item ID 13625. Sam x702 Resaw EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702 Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

John Deere 548G2

Send address changes to: Item ID: 14042 Lumberman's Exchange P.O. Box 1916 Contact: Austin Columbia, TN 38402x703 Ph: (888) 401-6367

The Lumberman's Exchange is published by Woods - 3410 monthly hours. $32,000 in recent Publishing, P.O. Box 1916, upgrades repairs. Fecon Columbia, TN and 38402. All rights reserved. All editorial/ advertorial BH250 Mulching Head. Item ID submissions are used at the 13502.ofSam discretion the x702 publisher and may be edited for purposes 2011 Tigercat 620Dof- clarity This is a and space. Although all efforts have hour skidder with only beenlow made to ensure accuracy of 5500 content submitted by advertisers hours on a cummins engine and and writers, the Lumberman's a fire suppression Comes Exchange, its principlessystem. and associates, are not held liable for mounted on 35.5 tires at 50% back errors or omissions. Reproduction, in whole or part, is prohibited with on and 40% front and good chains out written consent. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing

** CALENDAR**

2005 TIGERCAT 230B Tight, and dry machine, with 16,000 hours on the machine, new motor put in STATE WOODSMEN'S FIELD DAYS around 10,000 hours,NYCTR Fri, 18 August - Sun, 20 August Delimber trailer included, and reversible CSI Bucksaw, Boonville, New York www.starwebhosting.net/woodsmen/ will sell with, or without

Bucksaw. SOUTHWEST FOREST PRODUCTS EXPO Item ID 13911. Austin x703

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

2005 TIGERCAT 822 TRACKED FELLER BUNCHER Good running condition. 72ND ANNUAL GREAT LAKES Tigercat 22” Hot Saw with LOGGING & HEAVY EQUIPMENT EXPO 40 degree tilt. New center Thurs, 7 Sept - Sat, 9 Sept bearing and swing motor. Escanaba, Michigan Undercarriage at 50% or better. Very clean. MID-ATLANTIC High LOGGING & BIOMASS hours, but well cared for byFri, 15 Sept - Sat, 16 Sept single owner of land clearing Selma, North Carolina business. Often idledwww.midatlantic-logging-biomass for MID-ATLANTIC hours. Total hours 19,500. expo.com/ LOGGING & BIOMASS EXPO Item ID 13575. Sam x702

Every ReputableisWide Band an extremely accurate machine Supplier Offers in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO

feet aSteel minute also has CLT presses. 2006 TIGERCAT 630C Fri, 15 Sept3- High Sat, 16Quality Sept Swedish GRAPPLE SKIDDER Lexington, Kentucky 3 3” – 8” Band WidthItem ID 13876. Austin x703 Very good running condition. Dual http://www.kfia.org/ S & W 125 Band Mill with 3 16 to 20 Gage Arch grapple. New 35.5 tires. OnlyKentuckyWoodExpo.aspx Caterpillar generator - Low hours 4500 hours. Winch. Compare to 3 Double Cut Options on the mill, electronic computer Set new 630 at $310,000! THE PAUL BUNYAN SHOW 3 Choice of Swage orworks,1 Stellite 1/2" or 2" band, 22ft. track Item ID 13576. Sam x702 Fri, 6 Oct - Sun, 8 Oct Cat 3406 140KW Genset, 12,400 Cambridge, Ohio www.ohioforest.org BUT ONLY THE hours ready to run. Item ID 13434.

WOLVERINE

‘05 Woodmizer LT300

Sam x702 BY MENOMINEE SAW GUARANTEES

** INFO LINK**

Bell's Machining ..................... 27

CARRIAGES & DRIVES • Cutting Edge Plasma 2010 Welds Cardinal HD Carriage • The Industry’s HighestCarriages Band (Sawmill) Saw Capacity - Cardinal Carriage line it includes carriage • Quick Delivery from our HUGE Inventory M&F Gauge ............................. 28 with onboard log turners, carriage • Fast Program Meadows Mill,Sharpening Inc. ................ 33& Exchange drive, hyd pac for carriage, to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, ‘14 Hurdle 3-Hd • Competitive Pricing cabinet with electronic drives for Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Item ID: 14031 Contact: Austin B &Ph: B Mfg . ............................... (888) 401-6367 x703 18

B. H. Payne .............................. 16 Baker ...................................... 5, 7

Block Sawmill

carriage knees, husk including

CRD Metalworks .................... 25

And ONLY Menominee Gives You Everything 48" bottom and 36" top saw Item ID:saw 13997 Morbark ..................................... 9 You need in a Wide Band Saw – Plus Contact: Austin 2006................................... CAT 517 Multitek Expert Service 12 from the Most Ph:Industry’s (888) 401-6367 x703 Item ID: 13869 Piper's Saw Shop.................... 13 Knowledgeable Staff.

CW Mill-ArmorHog .............. 17

Rotochopper ............................ Ph: (888) 401-6367 x70240

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Buck Equipment (AIM) ........ 36 Corley Mfg .............................. 32

‘14 B66TD Rotochopper Item ID: 13838

Dyna Products ........................ 35 Contact: Sam

Contact: Sam

STACKING RAC

Got a Wide Band Problem? Call Menominee Saw Today and You’ll Sawmill Exchange 11 Mills Trust the Pro! Learn.................. Why More

(888)Hydraulics 401-6367 Ext. 603 8 Empire ...................

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

ItemMachinery ID 13408. Sam x702 Hahn ...................... 3

The Paul Bunyan Show ......... 39

TOLL FREE 1-800-582-0470

2014 Boiler Tigercat 630D Grapple 14 Thomas Industrial Controls..... 10 Hurst ............................. 900 16th St., Menominee, MI 49858 Skidder - Dual Arch Grapple. 21 Just Iron Bull ................................... Union Grove Saw & Knife.. 2, 37 Firewood Proc. Tel: 906-863-2609 Fax: 906-863-1147 1990 hours. 3 year/5000 hour PT Item ID: 13865 Kilgore Saw ............................. 22 Universal Refiner ................... 23 Email: info@menomineesaw.com warranty. 35.5 tires with dualing Contact: Sam www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l rings at 60%. Wide blade. Winch. Ph: (888) 401-6367 x702 800.S48.6914 I S73.663.7711 and no winch. Center pins are tight Item ID 13526. Sam x702 ‘14 Komatsu WA200 - USED FORESTRY EQUIPMENT FOR SALE  SELL EQUIPMENT TODAY ❘ the grapple 24/7 SUPPORT ❘ 2006  (888) 401-MENS L! 401-MENS SALE l§ TODAY 0 SUPPORT 2015❘ Tigercat 234BYOUR Loader - Model and extra fuel tank. Item ID 13929. roatation on w/ a Tigercat 630C GrappleNO. 11 Loader boom loader, 3 knife disc, Newer 234B. Only 300 hours on this Sam x702 30’ reach on the boom. Joystick Skidder - Very good running One Owner, low hours! discharge chute, New banding

WWW.MENOMINEESAW.COM

head. 10,880 hours. U/C at 2007 TIGERCAT 250B Phone 60%. Everything runs well and W/WARATAH PROCESSOR 315.284.4126 2007 Tigercat 250B Crawler with Faxhas been very well maintained. 315.849.2045 2005 Waratah 622B ProcessingWebsite Item ID 13592. Sam x702 Head. 9500 hours. The www.empirehyd.com 622B 2010 TIGERCAT 480 Waratah head is in great shape. 3 Email “Precision Under Pressure” info@empirehyd.com TRACKED MULCHER new wheel motors on the head all new pins and bushings. Head 3410 hours. $32,000 in recent has been totally rebuilt less than upgrades and repairs. Fecon 500 hrs ago. The swing motor on BH250 Mulching Head. Item ID 13502. Sam x702 the carrier has just been rebuilt and a new Hydraulic pump. U/C 2011 TIGERCAT 620D at 50%. Currently processing 600 tons/day. Runs great. Owner This is a low hour skidder with only 5500 hours on a cummins shutting down. engine and a fire suppression Item ID 13360. Sam x702 system. Comes mounted on 35.5 tires at 50% back and 40% 2009 TIGERCAT 620C This skidder only has 10575 front and good chains on all 4 hours with a cummins engine tires. Has the bigger 630 axles and fire suppression system. and no winch. Center pins are Tires are 30.5 X 32 with 20% tight and extra fuel tank. Item ID 13929. Sam x702 front, 1 new rear and 1 rear at 50%, 4 tire chains at 40%. 2011 TIGERCAT 845C Dual arch and no winch, extra fuel tank and tight center pins. Just over 4000 hours. 5400 head Excellent skidder ready to start and 340 degree rotation, undercarriage at 70%. Mercedes endragging wood. 13428 Victory Sam Ln. // PO Box 124 gine and fire suppression system. Item ID 13928. x702 Adams Center, NY 13606 This is a great buy for for such a super clean track cutter. 2009 TIGERCAT H250 Item ID 13927. Sam x702 TRACKED HARVESTER Tigercat Model 575 processing

2012 TIGERCAT 724E FELLER BUNCHER 2950hrs. 30.5 tires. Like new machine. One owner. Very well maintained. Item ID 13528. Sam x702 2014 630 D TIGERCAT 1300hrs like new inside 35 by ‘16 CB, Halverson H140 15, light package, large grapple and wench. Skidsteer (DEMO) ItemID: IDJW-909632 13408. Sam x702 Item Contact: J Williams 630D Ph: 2014 (888) TIGERCAT 401-6367 x701 GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702 2015 TIGERCAT 234B LOADER Model 234B. Only 300 ‘13 KMC 2500 Track hours on this machine, this Skidder machine is extremely fuel efficient, and very quiet. Item ID: 14078 In the cab, it has heated Contact: Austin and cooled seats. runs like Ph: (888) 401-6367 x703 new. Item ID 13880. Austin x703 off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 380  Issue 364

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

99 TIGERCAT 240B LOADER This loader is a package deal, portable, and mounted on a dump truck from the eighties. Also this loader can be mounted back on its trailer with delimber. It has 4509 hrs on a reman Cummins engine. ‘93 Barko 180B Item ID 13455. Sam x702 Item ID: 14077 Contact: Austin 230B TIGERCAT Ph: Tigercat (888) 401-6367 x703 5.9 This has a Cummins liter 360 Continuous roatation on the grapple w/ a 30’ reach on the boom. Joystick Controls, triple pump hydraulics, Stick and swing function w/ a fully enclosed Cab. Machine is located in Florida. Item ID 13643. Chris x700 TIGERCAT 250T ‘95TRACK John Deere C6 LOG LOADER Cummins 8.3 engine and pumps Tree Farmer

have been done probably Item ID: 13920 8,000-9,000 hours Contact: Austin ago. It has 45,000 hours. This machine Ph: (888) 401-6367 x703 has never run in the woods. It has been in a yard the whole time. Tracks are around 50% and this capacity!. Item ID 13421. Sam x702 machine has been extremely BARKO well taken care of! 1994 Barko - Electric Item ID 160B 13608. Chris x700 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

2006 TIGERCAT 630C GRAPPLE SKIDDER Very good running condition. Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch. Compare to new 630 at $310,000! Item ID 13576. Sam x702 2014 630 D TIGERCAT 1300hrs like new inside 35 by The Tree 15, CB, that light Started package, large grapple and wench. it All! Item ID 13408. Sam x702 Since 1986, Lumbermens has 2014 TIGERCAT 630D published a monthly circular GRAPPLE SKIDDER reaching sawmills, loggers, palletArch makers, recyclers and Dual Grapple. Just 1990 industrial plantsPT hours. 3 woodworking year/5000 hour worldwide. warranty. 35.5 tires with dualing

rings at 60%. Wide blade. Winch. PUBLISHER Publishing Item Woods ID 13526. Sam x702 TIMBCO ADVERTISING SALES Morris Woods 1996 TIMBCO T425B FB (888)Rotosaw 401-6367 Intermittent ext. 704 w/2008 morris@lumbermens.co Saw Head. Machine has 540 MARKETING DIRECTOR degree non continuous rotation Williams on upper.John 9900 hours. New (888) 401-6367 ext. 701 Undercarriage. New glass in cab. j@lumbermens.co Very good running condition. DESIGN Rotosaw has DIRECTOR 360 degree Heninger 6CT8.3 rotation. Donna Cummins REPS engine EQUIPMENT with 215 HP. Machine Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** CALENDAR**

1999 TIMBCO TF-820D FORWARDER 11k hrs on machine, new Cummins engine at around 8k hrs NY STATEand WOODSMEN'S 1997 TIMBCO 820C CLAM has fresh driveFIELD pumpDAYS & imp. August - Sun, 20 August BUNK FORWARDER Fri, 18 pump. 28L 26 tires some great, New York is ready to “4000” original hours. 20.3 x 25 Boonville, some decent. Machine www.starwebhosting.net/woodsmen/ rubber at 70%. Hand sanded and work, but could use a little fixing painted, brand new computer and here and there. the bucket is sloppy SOUTHWEST FOREST PRODUCTS EXPO Scorpion controls, added speed could stand to be pinned and AugustNo- major Sat, 26 August control. 2 sets of tracks , all Fri, new 25bushed. issues! Hot Springs, Arkansas Lexan. Located in Alberta, Canada. Item ID 13212. Sam x702 www.arkloggers.com Customer will pay shipping to closest US entry point. 2000 TIMBCO 415D w/2005 72ND ANNUAL GREAT LAKES Item ID 13532. Sam x702 FABTEK 4-ROLLER PROCESSOR LOGGING & HEAVY EQUIPMENT EXPO 21,000 hours on meter. Thurs, 7 Sept - Sat, 9 SeptNew JD 1998 TIMBERLINE STROKE 6 cylinder engine in 2011 has 7000 Escanaba, Michigan DELIMBER hours. U/C at 65%. Extensively 8400 hours. U/C at 60%. Will rebuilt with new swing motor, new MID-ATLANTIC LOGGING & BIOMASS crank and run. Owner retired.Fri, charge pump, new high speed saw 15 Sept - Sat, 16 Sept Machine idle for past year. motor, new main hydraulic pump, Selma, North Carolina Item ID 13599. Sam x702 new oil cooler, all main cylinders www.midatlantic-logging-biomass MID-ATLANTIC repacked. Package includes extra expo.com/ LOGGING & BIOMASS EXPO 1999 TIMBCO 820D CLAM final drive, extra computer screen, BUNK FORWARDER and extra swing motor. Has new jet KENTUCKY WOOD EXPO 10,300 hours. New engineFri, fit system. This machine is loaded... 15 Sept - Sat, 16 Sept less than 500 hours ago. Can Lexington, has pro-heat system Kentucky for cold accept bunks, but none with http://www.kfia.org/ weather start. Has fire suppression machine. Owner has two setsKentuckyWoodExpo.aspx system. All working! Hydraulic of tracks like new he will add for Oil just totally changed (100 new additional $20,000. new filters. THEgallons) PAUL with BUNYAN SHOW Item ID 13494. Sam x702 Item ID 13598. Sam x702 Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org runs great. Working in select hardwood today. Item ID 13548. Sam x702

** INFO LINK**

IntegrIty • PrecIsIon • QualIty • Value Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

May be sent to Bell'sfor Machining ..................... Seemorris@lumbermens.co why we are your BeSt Source bandsaw blades! 27

Metal Detector's Inc. .............. 30

Woodmaster P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

2000 TIMBCO 425D W/33” FOR CLASSIFIEDS BAR SAW HEAD 40 degree tilt on head. 540 Call 888.401.MENS degree rotation on upper body. Seeyear pictures, prices,6CT8.3 and One old Cummins Location of all equipment at engine. Resealed pumps. Rebuilt valve bank. 90% undercarriage. www.LumberMB\ISmagazine.com Can accept hot saw. Fire suppression system. Auxiliary oil BANDMILLS & HEADSAWS cooler. Good running machine. Danckaert Band Resaw - Roughly Item ID 13549. Sam x702 10 hours on this machine since it

has been rebuilt, it has a445D 24foot in 2000 TIMBCO feed deckengine 20 foot out deck last Recent andfeed pump winter. New sprockets and with 44 inch wheels, and all therollers. 22” quadco hot saw. Owner bells and whistles, its a production retired. Located in Montana. machine, with air strain conveyers Item ID 13790. Sam x702 that go up and down, with airbags, it includes two sets of Mcdonough 2005 TIMBERPRO 830TF

FORWARDER pressure guides. Top Casting wheel 6580 hours. Very good condition. is supported on both sides. This Tracks for all bogies. 710/45-26 is an extremely accurate machine tires at 70%. Includes bolsters in ve1y good condition, and back rest. ComesCuts with13036” feet a minute has CLT grapple with also grapple sawpresses. option. Set up with harvester hydraulics Item ID 13876. Austin x703 according to owner. S & W 125 Band Mill with Item ID 13161. Sam x702 Caterpillar generator - Low hours

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

cabinet with electronic drives for 84/85 John Deere

440B/C

We offer the highest quality welds and our people use the POSTMASTER Buck Equipment (AIM) ........ 36 Send address to:and precision highest level ofchanges integrity to give you the best Lumberman's Exchange Corleyship Mfgall .............................. bandsaw in the business—we over the US. 32 P.O.blades Box 1916 Columbia, Satisfaction TN 38402 alwaysCRD guaranteed! Metalworks .................... 25

Midwest Sharpening.............. 26

carriage knees, husk including

Morbark ..................................... 9

Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702

CW Mill-ArmorHog .............. 17

Rotochopper ............................ 40 Contact: Austin

Brute Force Mfg. ..................... 31

Multitek ................................... 12

Wood-Mizer LT40

Piper's Saw Shop.................... 13

Item ID: 13995

CW Mill-Hogzilla ................... 15

thIn Kerf

Ph:Electric (888) 401-6367 x70320 Row ............................

Dyna Products ........................ 35

Band saw Blades

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Ask About Our Hahn Machinery ...................... 3 Dismanteling Blades

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

Our Quality • Our Service • Our Price

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

STACKING RAC

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

1-888-857-5153

48" bottom saw and 36" top saw

‘89 Timberjack 380A ❘ 0  24/7 SUPPORT SUPPORT

 SELL YOUR EQUIPMENT TODAY TODAY l§

Item ID: 14039 Contact: Austin

Please see us at

‘90 Bell Super TBooth #421 Item ID: 13896 www.BakerProducts.net Contact: Sam 800.S48.6914 I S73.663.7711 Ph: (888) 401-6367 x702 ❘ L!  (888) 401-MENS 401-MENS

NO. 13

John Deere Dual Arch Grapple,

2006 TIMBCO/VALMET tranny. Runs great! Machine is Phone 445EXL W/BAR SAW 315.284.4126 tight. She’s a workhorse! Fax 9200 hours. One owner Item ID 13470. Sam x702 315.849.2045 machine. 33” Bar Saw Head withWebsite www.empirehyd.com 360 degree rotation. Tracks at 1979 TIMBERJACK 240 Email “Precision Under Pressure” 60%. Runs good and machine is GRAPPLE SKIDDER W/ info@empirehyd.com tight. Reman Cummins 6BT8.3 WINCH one year old. Excellent running condition. Item ID 13556. Sam x702 New brakes, 23.1x26 tires TIMBER KING Holds air. Best sounding 453 Detroit out there. Starts in Very 2005 TIMBERKING 560 DS Same as Prentice 2384, 9500 cold weather on first try. Item ID 13560. Sam x702 hours on perkins engine with new injector pump and ECM 1982 TIMBERJACK 240A by Cat. CSI delimber, good A/C, Tight, Clean Skidder! Brand New tires, and lights. Crate Motor 453 has roughly Item ID 13636. Sam x702 500 hrs on it,winch rebuilt, starter rebuilt, master cylinder 2006 711 TIMBERKING With 6,716 hours. with 7,000 rebuilt, new batteries, battery logmax processing head& fire wires 4 brand new ice chains, 6 suppression system. Under new slides n tear drops, no leaks carriage is real good, Runs and n all the pins are super tight. New belts n some new hoses. works Great! Item ID 13557. Sam x702 Item ID 13737. Sam x702 TIMBERJACK

1989 TIMBERJACK 230A 1969 TIMBERJACK 225D SKIDDER It has a 4bt cummins engine, ring chains iceLn. chains 13428front Victory // POrear, Box 124 4 speed manual shift, and only very good condition! Adams Center, NY 13606 3,411 original hours, comes Item ID 13215. Sam x702 with 4 new firestone 23.1-26 1968 230 TIMBERJACK SKIDDER tires. The transfer case & winch New 353 Detroit engine, new have all new clutches, seals, and

bearings. New brakes have been installed as well as new master cylinders. Very clean and tight machine. Item ID 13885. Austin x703 1993 TIMBERJACK 1010 FORWARDER 16,000 hours. Good running ‘16 Halverson H140 condition. 6 wheeled. Tracks for Skidsteer rear bogies and (DEMO) chains for front tires. Item ID: JW-909632 Item ID J13446. Sam x702 Contact: Williams Ph: (888) 401-6367 x701 1993 TIMBERJACK 380B PG HIGHLIFT TREE TRIMMER s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone 67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL. ‘13 KMC 2500 Track Item ID 13090. Sam x702

1997 TIMBERJACK 240D This skidder comes with 23.1 X 26 tires at 95% rear and 30% front. New brake bands in winch and good cable. Engine was rebuilt 2 years ago. Good strong running machine. Item ID 13917. Sam x702

‘93 Barko 180B

Item ID:TIMBERJACK 14077 1998 360 Contact: Austin CABLE SKIDDER Ph: (888) x703 This is an401-6367 excellent skidder with only 6650 hours. New center section. Cummins engine with electronic automatic transmission. Item ID 13777. Sam x702 1998 TIMBERJACK 460 Excellent Condition. Runs great. WOODS READY. ‘95 John Deere C6 Item ID 13545. Sam x702

Tree Farmer

1994 450C Item ID:TIMBERJACK 14078 Grapple with winch, new Contact: Austin transmissiion and x703 hydraulic Ph: (888) 401-6367 pumps. Item ID 13826. Sam x702

2001ID: TIMBERJACK 460C Item 13920 This is a single arch with winch Contact: Austin with only 6800 original hours. Ph: (888) 401-6367 x703 This is a very low hour machine. Cummins 5.9 engine has a crack in it. It can be loaded onto a capacity!. Item ID 13421. Sam x702 lowboy. This would be great BARKO starter skidder with a new engine. 1994 Barko - Electric Item ID160B 13829. Sam x702

well built processor. Item ID 13820.

motor, Rotobec continuous

Skidder

off onto a conveyor. This is a very Sam x702

knuckleboom, 30' boom, 75hp grapple, 5,000 original hours.

(excellent condition.). Item ID Firewood Processor - This is P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

13238. Chris x700 a Chomper Model 16 PDA www.multitekinc.com • sales@multitekinc.com ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Multitek Firewood Processors

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

with John Deere power unit with

- Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

on injection pump. always started

Increase Your Productivity and Profitability kohing head. head works great. amp gauges. Cuts logs up to 16”.

• Quality Equipment to Reduce Labor Costs Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes your with all Circular Saw manuals or Bar and & Chain 20,000lb goose neck•trailer. Item ID receipts.Models Purchased

1999 Barko 160D - new engine with

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

delimber, grapple has been rebuilt. Made in the U.S.A. Boom cylinders have minor leaks.

Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value

condition. Easily produces high

FromItem ID 13865. approximately 1500 hours. Hour 13916. Austin x703 • 7 Models to Choose new for $32,500. • Production Ratings up to 5.5 Full Cords Per Hour meter dont work. The last 2 owners Best Value Portable Log Splitter Sam x702 have only used it to load trucks or - Small manufacturer in PA has LOGGING EQUIPMENT as a backup as needed. Has a CTR made the best valued log splitter. BANDIT

drum design. Can easily load 42’

13HP Honda motor. Manual start

with 1700 hours, in very good

quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 380  Issue 364

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID 13694. Sam x702

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

2005 TIMBERJACK 460D Same thing as a John Deere 648GIII. Around 12000 Hours with new engine, dual arch, comes with 77 X 44.00 X 32 tires. 3 at 60% and 1 new one. Excellent skidder. Item ID 13709. Sam x702 2005 TIMBERJACK The Tree 608B This cutter has 10800 that Started frame hours with a new it All! undercarriage with less than aSince 1000 hours, 36” pads. It 1986, Lumbermens has does have some small leaks. published a monthly circular Owner is going back to reaching sawmills, loggers, rubber tired cutters pallet makers, recyclersbecause and industrial his job haswoodworking changed. plants worldwide. Item ID 13898. Sam x702 PUBLISHER Woods Publishing TIMBERJACK 240 In excellent condition! ADVERTISING SALES Well maintainedMorris withWoods 453 detroit. (888) Lots of new401-6367 parts. ext. 704 morris@lumbermens.co Item ID 13785. Sam x702 MARKETING DIRECTOR TIMBERJACK 380 SKIDDER John Williams 401-6367 701 Low Tight (888) machine. Runsext. great. j@lumbermens.co Hrs. One owner. ItemDESIGN ID 13468. Sam x702 DIRECTOR Donna Heninger

TIMBERJACK 460 GRAPPLE SKIDDER EQUIPMENT REPS This machine is an excellent Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

** CALENDAR**

1996 TIMBERJACK 230 FORWARDER 15,000 hours. Good running ‘69 207 TIMBERJACK CABLE SKIDDER condition. Working today. STATESerco WOODSMEN'S DAYS This Machine has a NY Brand Loader. DryFIELD and still runs Fri, 18 strong. August - Sun, 20 August new 4 cyl Perkins Engine, York Major Overhaul out of frame. Boonville, Item IDNew 12943. Sam x702 Transmission has www.starwebhosting.net/woodsmen/ been completely overhauled out 1980 TIMBERJACK 240E SOUTHWEST FOREST PRODUCTS of frame. Reverse box also CABLE SKIDDER EXPO Fri, 25 August Sat, 26 August overhauled out of frame. Has a Has the big 23.1x26 tires (60%) Hot Springs, Arkansas new Injector pump and all new with brand new chains on all 4. www.arkloggers.com injectors. 25% on tires on it. Detroit 4-53, Gearmatic 119 Item ID 13283. Chris x70072NDwinch withGREAT 10 chokers. 4 speed ANNUAL LAKES manual transmission. ProfesLOGGING & HEAVY EQUIPMENT EXPO ‘88 450B TIMBERJACK sionally made grapple on front Thurs, 7 Sept - Sat, 9 Sept Put new centerpins in 8 months Escanaba, blade. JustMichigan put a Brand new ago, it has a new eslking beams Hercules Winch on. This ma& new radiator. Goo winch, 100” chine starts, runs&and operates MID-ATLANTIC LOGGING BIOMASS Esco grapple, all new drive lines, like new. You won’t find one in Fri, 15 Sept - Sat, 16 Sept excellent 6 cyl cummins motor, better shape. Selma, North Carolina good brakes. It’s skidding 25-30 Item ID 13542. Chris x700 www.midatlantic-logging-biomass MID-ATLANTIC loads a week on smaller jobs. expo.com/ LOGGING & BIOMASS EXPO Item ID 13327. Chris x700 1986 TIMBERJACK 240A SKIDDER 23.1 tires.WOOD Recently overhauled KENTUCKY EXPO 1979 TIMBERJACK 230 Fri, engine. Machine close to 13,000. 15 Sept - Sat, 16 Sept FORWARDER Engine only 400 to 500 Lexington, Kentucky hours. Good running forwarder with 80% http://www.kfia.org/ Item ID 13944. Austin x703 rubber. Serial Number: 792888.KentuckyWoodExpo.aspx Open cab. Detroit engine. Simple TIMBERJACK 380B but hard working machine. Very DOUBLE ARCH SKIDDER THE PAUL BUNYAN SHOW clean for its’ age. Hard to find. 5.9 cummings with 4 speed power Fri, 6 Oct - Sun, 8 Oct Item ID 13057. Sam x702 shift transmission. New gauges Cambridge, Ohio on the dash so hours unsure. www.ohioforest.org condition. Running daily! Item ID 13860. Sam x702

** INFO LINK**

New LED lights all around. Motor CLASSIFIEDS hasFOR rotary injection pump. Winch is good. Recently came off the job Call 888.401.MENS and is field ready. See pictures, and Item ID 13942. prices, Austin x703

Location of all equipment at TIMBERJACK 380B SKIDDER www.LumberMB\ISmagazine.com

Single arch skidder with a new 5.9BANDMILLS cummings motor, less than & HEADSAWS 200 hours. Rebuilt 4 speed power Danckaert Band Resaw - Roughly shift transmission. Good center 10 hours on thishas machine it pins. Winch newsince brakes, has been rebuilt,New it hasinline a 24foot in good grapple. bosch injection motor feed deck pump, 20 foot makes out feedthe deck come rear tires with 44alive. inch wheels, and all60/70% the front tires 20/30% Machine is bells and whistles, its a production field ready. 1 set of ice chains for machine, with $1000. air strain conveyers an additional that go up down, with airbags, Item ID and 13941. Austin x703 it includes two sets of Mcdonough

2002 guides. TIMBERJACK 460D pressure Top Casting wheel This skidder is the same thing is supported on both sides. This as a 648GIII and is in excellent is an extremely accurate machine condition. New engine has in ve1y good condition, 130 about 4000 hours.CutsTorque convertor transmission. hole feet a minute also has CLT 14 presses. wheels. Tires are 30.5’s at 55% Item ID 13876. Austin x703 and one at 80%. Center has S & W 125 Band Mill with very little slack. This skidder Caterpillar hours has been agenerator back up- Low skidder for on the mill, electronic computerhas Set the several years. Skidder 12000 works,1hours. 1/2" or 2" band, 22ft. track 13805. Sam12,400 x702 CatItem 3406 ID 140KW Genset, hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

Innovative 2010 Cardinal HD Carriage

Clean-Burn Design Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Saw ..................... 29 BakerManufacturing ...................................... 7 Menominee a full line of 5, biomass ﬁred combustion systems..................... backed with 27 ﬁfty years of Detector's Inc. .............. 30 Metal Bell's Machining innovative clean-burn design. Diverse in every Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 way with multi-fuel blending capability. Hurst utilize (AIM) hundreds of common and Buck stokers Equipment ........ 36 Mor bark ..................................... 9 abundant solid biomass fuels. Corley Mfg .............................. 32 project Multitek ................................... 12 Large or small scale, management is eased with the CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 impressively short installation time CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 required with prefabricated modular components. CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

HahnDryers Machinery ...................... 3 Rotary Sand Dryers Hurst Boiler ............................. 14 Grain Dryers Iron Bull ................................... 21 Lumber Kilns Cement Kilns Kilgore Saw ............................. 22 Brick Kilns Lignomat ................................. 24

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC 50

YEARS www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 15

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Tigercat 615C Item ID: 17058

2013 model with only 600 hours in like new condition, with size 30,5 tires. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2007 Morbark Chipper

‘13 KMC 2500 Track Skidder CAT 235 BZ

Item ID: 9658

model 22. Everything works like it should... Ready to go to work! 13428 Victory Ln. // PO Box 124 Center, NY 13606 Contact:Adams WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Item ID: 1865 Item ID: 14078

215,000 pound Cat 235bz Austin knuckle boom with 50 foot Contact: reach. Needs about $7K in repairs.

Ph: (888) 401-6367 x703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

off onto a conveyor. This is a very

B U Y S

well built processor. Item ID 13820.

2009 John Deere 700J Dozer Sam x702 Item ID: 54715

‘05 Gehl CTL 70 855 Cummings 350 KW

‘83 John Deere 855 Cummings 350kw gen set enclosed with 4850 belly tank. 300 original hours since new. Item ID: 28802

H O T

Firewood Processor - This gone is through John Deere 700J dozer with winch, machine completely in spring. Enclosed with heat and air, excellent machine approx 3500 a Chomper Model 16 PDA hours. Excellent working machine! Call for more pictures!

Other generators available. Item ID: 14073

Contact: Austin

Contact: TED Ph: (888) 401-6367 x703 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 with 1700 hours, in very good

automatice firewood processor

Contact: MARK Email: Mark@lumbermensco.com with John power unit Phone: 888-401-6367 EXT Deere 708 or 702-875-2703

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

low hours. Control panel includes tach, oil pressure, water temp and

Inline 6 CAT 200 KW

ampItem gauges. logs up to 16”. ID:Cuts 44131 chain conveyer, 8 way splitter,Unit on has 200 Oneoriginal ownerhours. and comes with all 20,000lb goose neck trailer. Item ID

- Small manufacturer in PA has

quality chips with patented ‘Cone’ Handles logs up toItem 32”. Uses Bandmill ID: 32925

Timber harvester 25ht30 can cut 30”motor. diameter 21’ long logs, start 35hp gas drum design. Can easily load 42’ 13HP Honda Manual motor, mill is totally hydraulic, new battery, 16 New blades, comes with owners manual and maintenance records. Call for more pictures! per but electronic option is available.

Contact: MARK day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge

EDGERS & GANGS

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703 adjustable to or single two way.

Great

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Item ID 13644. Sam x702

Item ID: 98053 with a 10’ homemade processor

in excellent condition. Runs great.

Firewood Processor Timbco 425D- This is a

FIREWOOD PROCESSORS Has a hydraulic grapple, 1995 model log with deck. good Undercarriage and 22” quadco hot saw. Around 10,000 hours.

2010 Shop Built Wood Processor

chain and kicker that all runs off

- It has a 353 Detroit diesel, 40Contact: AUSTIN of a 4 cylinder Mercedes power inch insert tooth circle saw, 380  Issue 364

manuals and receipts. Purchased

Contact: TED Email: Teds@lumbermensco.com 13916. Austin x703 new for $32,500. Item ID 13865. Phone: 888-401-6367 EXT 701 Best Value Portable Log Splitter orSam (801)x702 319-9351

condition. Easily produces high1998 Timber made the Harvester best valued log30HT25 splitter.

vans and produce 6 - 8 loads

with

Email: Austin@lumbermensco.com OR 931-797-8029 30Phone: foot 888-401-6367 unit. Has EXT a 4’703 chain saw that kicks

Lumbermens  since 1986

❘

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

CAT 3412 - 600KW Prime

2004 Bandit Beast Model 4680 Item ID: 85729 3412 Caterpillar Diesel engine

Has 233 original hours & 1 hour running time on with 850 HP. 5300 hrs. MillWill indo load new sleeves, pistons, & bearings. test before loading.

‘95 John Deere C6 Tree Farmer Item ID: 13920

2004 CAT 517 Grapple Dozer Contact: Austin Item ID: 70690

Ph: (888) 401-6367 x703

cat 517 swing boom grapple, enclosed cab, heat/air air needs a recharge, 8’ 6 way blade, 24” pads, good rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures capacity!. Item and ID video! 13421. Sam x702

Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708 702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark Chipper

good. in good working order. 22in Item ID: 80356 kohing head. head works great. Totally rebuilt by pro.

58 inch real

Item 13185. cleanID nice piece.Sam x702

1999 Barko 160D - new engine with Contact: TED approximately 1500 hours. Hour Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 meter dont work. The last 2 owners or (801) 319-9351 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. CAT D349 Gen5.9 2

CUMMINSItem continuous ID: 227grapple. Runs Great!. Item ID208-220-230-240V, 13740. Sam Marathon Generator 480V transfer box, includes control panel, safeties, governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 original hours, 1100hp diesel. Several other generators also available

x702 engine

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Phone: 888-401-6367 EXT 701 Remote control. production or (801)Big 319-9351

Phone: 888-401-6367 EXT 701 control, 33” and tranny or bar, (801) pump 319-9351

Contact: TED job, ready to work! Acre Email:clearing Teds@lumbermensco.com

 List  seLL  exchange  buy  save

TED aContact: brand new Duetz engine. Lever Email: Teds@lumbermensco.com

❘

 LumbermensCO.com

** CALENDAR**

2005 Peerless 45’ Walking Floor Trailer Item ID: 83112

peerless 45’ walking floor, refurbished, dot tagged, couple slats on the very end are knicked up a bit, breaks good, NY tires decent, overall good condition, 96” wide. CallSTATE for more pictures!

2010 Vermeer Horizontal FOR HG6000 CLASSIFIEDS Grinder Item ID: 96128 Call 888.401.MENS

pictures, prices, and WOODSMEN'S FIELD DAYS screens- 6”, 4”, 2”See Extra parts Call for more pictures! Fri, 18 August - Sun, 20 AugustContact: MARK Location of all equipment at 765 HP C18 engine with 5000 hours Half of new chain and apron 3

Email: Mark@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 www.starwebhosting.net/woodsmen/

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

The Tree that Started it All!

Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 AugustExcellent condition, 40 hp twin saw motor. The saw motors are

Item ID: 7571

9500 approx hours, hear air, radio, enclosed cab, all cylinders been repacked, transmission is in good shape, no issues, 30.5 tires approx 70%, good woods ready machine! Call for more pictures!

Hot Springs, Arkansas www.arkloggers.com

Lincoln 40HP10 1780 RPM currently for 480v.—-spinning hours on thiswired machine since it 36 inch F pattern circle saws. The hydraulic power pack is a 10Hp motor has also 480V. Scragg will handle 12 foot and up to been rebuilt, it has a 24foot in14 inches in diameter easy. Scragg in great shape. has been run very little. Can send video on request.

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES Contact: TED Contact: MARK Email: Mark@lumbermensco.com with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 701 or (801) 319-9351 Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS it includes two of Mcdonough new paint, 2 new tires and sets 2 @ 70% [18.4 X 34], 1 set Fri, 15 Sept - Sat, 16 Sept 1986, of chains, Heated cab. Ready to go nothing needs to be

PUBLISHER

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 1998morris@lumbermens.co CAT 517 Grapple Dozer

Item ID: 48152

MARKETING DIRECTOR

Cat 517 swing boom grapple dozer, approx 3800 John hours true hours!, goodWilliams undercarriage, 90% of cylinders rebuilt, new hoses. Excellent (888)all 401-6367 ext.Machine. 701 Call for more pictures!

j@lumbermens.co

Contact: MARKDIRECTOR DESIGN Email: Mark@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 708 702-875-2703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

LOGGING & BIOMASS EXPO

pressure guides. Top Casting wheel Selma, North Carolina fixed. Selling because he doesn’t need it anymore. www.midatlantic-logging-biomass is supported on both sides. This Contact: TED expo.com/ Email: Teds@lumbermensco.com is an extremely accurate machine

1997 Cat D4H Grapple Dozer

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Cat D4H fixed boom grapple dozer, with winch(leverFri, 15 Sept - Sat, 16 Sept

feet a minute also has CLT presses.

2008 John 748Hx703 Grapple Item IDDeere 13876. Austin Item ID: 72099 Skidder

cable is not hooked up) winch has rarely been used, Lexington, Kentucky guarantee winch works, it has been engaged by hand recently, approx 4480 original hours, new rollers and http://www.kfia.org/ sprockets, 24” pads, needs pads, work done by Cat, transmission is good, torque is good, runs fine, mo-KentuckyWoodExpo.aspx tor and tranny clean and solid. Great machine! Call for more pictures!

S & W 125 Band Mill with

748H 9500 hours 15 hours on new crate motor, 30.5 tires 70% tight center, dry, everything is tight and solid, dual arch, direct drive, sweda axles, 110” generator - Low hours grapple, good Caterpillar winch. Great machine! Call for more pictures!

on the mill, electronic computer Set Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or702-875-2703 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

** INFO

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

We also offer expert Sharpening Services, plus… CARRIAGES & DRIVES

B & B Mfg. ............................... 18

2010 Cardinal HD Carriage Gang • Edger • Scragg LINK** Carriages (Sawmill) - Cardinal line it includes carriage Trim •Carriage Split • Strob M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

We(888) have the most popular sizes in stock & ready to 401-6367 ext. 703 austin@lumbermens.co ship from major manufacturers, including… MAILING ADDRESS

Phone: 888-401-6367 EXT 701 or (801) 319-9351

Item ID: 19652

BANDSAW BLADES Austin Woods

bells and whistles, its a production

machine, with air strain conveyers Timberjack Item 114 that go up350 and down, withID: airbags,

Baker ...................................... 5, 7

withany onboard log turners, just about Custom Sawscarriage you drive, hyd pac for carriage, need to keep you cutting longer… Menominee Saw ..................... 29 sawyers cab, computer controls, for less!

…and

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31 Welded to your lengths! POSTMASTER

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Call Marvin Miller for Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

48" bottom saw and 36" top saw

a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

STACKING ROW ELECTRICAL EQUIPMENT, RAC INC. Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial YOUR SOURCE FOR USED, RECONDITIONED: submissions are used at the Empire Hydraulics ................... Select Sawmill ......................... • Squirrel Cage Motors 8• DC Motors - Crane and Mill 19 • Transformers, Three-Phase discretion of the publisher and may • Gear Speed Drives •4 Across/Line Magnetic Starters be edited for purposes of clarity Great LakesMotors Mfg. .................... 34• Adjustable Smith Sawmill ........................... and space. Although all efforts have • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters The Paul Bunyan Sets Show ......... 39 Hahn Machinery ...................... 3• Engine-Generator been made to ensure accuracy of • Synchronous Motors • SafetyItem Switches ID: 13926 content submitted by advertisers • DC Motors • Transformers, Single Phase • Phase Convertors Hurst Boiler ............................. 14 Thomas Industrial Controls ..... 10 Contact: Sam and writers, the Lumberman's Exchange, its principles and Ph: (888) 401-6367 x702 P.O. Box 281221• Toledo, Ohio 43606 Item ID: 13994 Iron Bull ................................... Union Grove Saw & Knife.. 2, 37 associates, are not held liable for ax to Contact: Austin WWW.RoWELECTRiCAL.CoM errors or omissions. Reproduction, Kilgore ............................. 22 Universal Refiner ................... 23 Item ID:Saw 13898 Ph: (888) 401-6367 x703 419-248-4479 in whole or part, is prohibited with cylinder engine. Recently replaced Contact: Sam rowelec@glasscity.net www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent. turbo. 23.1 tiresI at 50%. 16” Rapid Ph:THE (888) PHONE 401-6367 x702 800.S48.6914 S73.663.7711 WE ANSWER 24 HOURS • WE BUY USED ELECTRICAL ©2017 Woods Publishing

608B F ‘05 Timberjack :

419-244-8887

Electric 3Phase Slab Edger

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 13998 Contact: Austin

Shop Built Firewood Proc.

800-248-4479

chipper hood for easy knife access.

 SELL YOUR EQUIPMENT30TODAY TODAY chain 24/7infeed SUPPORT l§ SUPPORT ft. x 10 ft❘ CAT0 bed.

condition machine. Item ID 13486.

PSB Post Peeler

Enclosed weatherized operators’

Buncher shear head. Machine is ❘ fast  and (888) NO. 17 L! 401-MENS in 401-MENS very good condition. Item ID 12531. Sam x702

B U Y S

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

H O T

BANDMILLS & Item HEADSAWS ID: 3607

SOUTHWEST FOREST PRODUCTS EXPO Precision Scragg 2005 Cat 525B Grapple Skidder

B U Y S

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 230 D Forwarder

2012 Tigercat 610C

Item ID: 98897 ‘16 Halverson H140 1977 model. 353 Detroit, 5 speed trans with a Skidsteer (DEMO) low low. New brake drums and brakes. Motor

H O T

Item ID: 98059

7870 hours, 1 hour on out of frame reman on the entire engine, hydrostats in great condition, dry machine, tight centers, tight blade, tight grapple. Excellent woods ready machine. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

‘11 Tigercat 845C Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

good, pins loseJW-909632 on the loader, 2 extra tires 50% Item ID: or better. Tires on it 40%. Ready to use now. Contact: J Williams Contact: TED Ph: (888) 401-6367 x701

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘93 Barko 180B JD 440C

ID: 4032 Item ID:Item 14077 (‘90 model) Winch re-done 1mo. ago, tires bought new Contact: Austin last March, size 18.4, JD engine 4cyl, 8.7K frame hrs, but there is(888) more than401-6367 that. Only 2 owners its entire life. Ph: x703 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

L O G G I N G

TimberPro 725B

JD 648G II

Item ID: 20976

Item ID: 34800

(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco 2900 intermittent disc saw head. Cream puff!

Motor rebuilt 1K hrs ago, tranny redone 700hrs ago. Needs new tires, but everything is in good conditions, tires are 30.5 size. Center section, pins & bushings good!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Email: Joe@lumbermensco.com Item ID: Phone: 888-401-6367 EXT13920 709 OR 801-362-2170

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder TIMBERJACK 460D / 648G III

Timberjack 240D

Item ID: 40272 13428 Victory Ln. // PO Box 124 Skidder has a grapple and a winch, Adams Center, NY Cummins 13606 motor. In excellent condition.

‘95 John Deere C6 Contact: JOETree Farmer

with 6 cylinder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 34900

(‘05) pins and bushings all good, no leaks, motor rebuilt approx. 2.5K hrs ago, T/C (no direct drive). Item Two new back tires, front tires 35%. capacity!. ID 13421. Sam x702JD 748G model bigger grapple on it. 13K frame hrs, new injection pump 8mo. ago, new ECU. A/C - heat good!

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

John Deere 700H Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820. Item ID: 1324 Firewood Processor - This is

‘05 Gehl CTL 70 John Deere 640G3 Cable Skidder Item ID: 51567

‘83 John Deere 4850

approx 2500 hours on rebuilt engine and reconditioned transmission, winch recently redone, all new o rings, clutch packs good, 6000 series winch big winch with oversized cable on it, 120 rate chokers, 23.1 tires 20-30%, comes with ice pick chains single diamond, 2 at 70% 2 at 80% or better, new hydraulic pump, all rebuilt axels, new differential pump, blade and steering cylinder recently repacked, great on cold start, no blow by strong motor strong transmission Call for more pictures!

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

condition. Easily produces high

13000 frame hours with a New undercarriage. No blow by, Chomper Model 16 PDA and doesn’t ause any oil

automatice firewood processor

Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

rebuilt injector pump, John Deere winch good winch strong winch, new hy-

20,000lb goose neck trailer. Item IDpump, Dry manuals and Purchased draulic machine don’t burn receipts. no oil, tight machine. Complete ser13916. Austin x703

vice every 2 months greased every other day. Call for more pictures and video! new for $32,500. Item ID 13865.

Contact: MARK Splitter Sam x702 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

- Small manufacturer in PA has

made the best Wheeled valued log Feller splitter. Hydro-Ax 611EX

built, approx 8000 hours, dry machine no leaks, heart/ air works, all per but electronic option is available. new glass, tight excellent machine! Call for more pictures!

Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Phone: 888-401-6367 EXT 708 or 702-875-2703

in excellent condition. Runs great. Firewood Processor - This is a Komatsu Processor & Forwarder Item ID: 8298 Item ID 13644. Sam x702 homemade processor with a 10’

Like new, approx. hours Has on harvester, approx. 500 grapple, hours on forFIREWOOD PROCESSORS log750 deck. a hydraulic warder both in like new condition, tracks included! Selling only be-

cause workerschain only want to show up 2-3 days week. Goingoff back to Processor and kicker thatperall runs cutter, skidder, loader setup Call for more pictures!

- It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Contact: MARK

inch insert tooth circle saw, 30 Email: foot Mark@lumbermensco.com unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 708 or 702-875-2703

380  Issue 364

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

sure on Good Sam thing isx702 these will run forever Item IDhours. 13185.

day. Item ID 13882. Austin x703

2010 Shop Built Wood

13238. Chris x700

chain conveyer, 8 way splitter,28L’s, on approx 1400 One owner withnew allcenters, hours on rebuiltand engine comes and transmission,

amp Item gauges. logs up to 16”. ID:Cuts 41839

drum design. Can easily load 42’ 13HP Honda motor. Manual start 1999 611EX quick steer, 28L’s 60-70% all pumps gone through and re-

EDGERS & GANGS

(excellent condition.). Item ID

tach, oil pressure, water temp and

Timberjack 450C Grapple Skidder

quality chips with patented ‘Cone’ Handles logs up Item to 32”.ID: Uses Buncher 40418 vans and produce 6 - 8 loads

motor, Rotobec continuous

onTimberjack injection pump. always started 1210 Forwarder Item ID: 97522 good. in good working order. 22in

Best Value Portable Log

with 1700 hours, in very good

BARKO

Contact: JOE 1994 Barko 160B - Electric Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Lumbermens  since 1986

❘

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

John Deere 640D Sam x702 Item ID:63000 2004 Bandit Beast Model 4680 -

3412 Caterpillar engine cable Skidder.Diesel Rebuilt engine and 850 newHP. hydraulic with 5300 hrs.pump Mill input in. Woods ready. good condition. Just finished 10 Contact: WALKER Acre clearing job, ready to work! Email: Walker@lumbermensco.com Remote Big production Phone:control. 888-401-6367 EXT 707

 List  seLL  exchange  buy  save

woods ready, tight head dry machine, no blow by, transkohing head. works great. mission is tight and smooth, AC heat work good, un-

when taken care of right. Which this one has been.

Call forBarko more pictures! 1999 160D - new engine with

approximately 1500 hours. Hour Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708 have only702-875-2703 used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple. Cat 515 Converted Cable Skidder Item ID: 2042 Runs Great!. Item ID 13740. Sam

custom built log arch styled after John Deere arch made with

heavy duty steel, brass fittings, grease-able rollers($7k arch). x702 Approx 4000 true Cat documented hours, 28L tires, 2 like

BELL

new, 2 50%, coolant and oil tested by Cat and documented on July 24th 2018, enclosed cab, working heat/air, everything is in great working condition. Call for more pictures!

1990 Bell Super T - This Bell has MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com Phone:33” 888-401-6367 EXTtranny 708 control, bar, pump and 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

Cat 318CL FOR CLASSIFIEDS Item ID: 97884 Call 888.401.MENS (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly 2 processor head. U/C 05’ model with 6000 hours, enclosed cab with heat & air. 50%, enclosed cab, leveling cab, A/C - heat works. It can also be Everything works like itpictures, should. See prices, and NY STATE WOODSMEN'S FIELD DAYS purchased without the ROlly 2 head Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 709 OR 801-362-2170 TimberPro 735B Item ID: 52609

www.starwebhosting.net/woodsmen/

The Tree that Started it All!

John Deere 540G3 SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Item ID: 92115

Hot Springs, Arkansas www.arkloggers.com

2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.

BANDMILLS & HEADSAWS

Timbco 820D Danckaert Band Resaw - Roughly Item ID: 18370 10 hours on this machine since it

06’ model Clam bunk forwarder with Cummins engine.

has been rebuilt, it has a 24foot in

Contact: AUSTIN feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept

Timbco 425B

machine, with air strain conveyers

Item ID: 74779

MID-ATLANTIC LOGGING & BIOMASS (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Timbco EXL KENTUCKY WOOD445 EXPO Fri, 15 Sept Item - Sat,ID:1687930 Sept

Lexington, (‘09) (9.5K hrs) U/CKentucky at 80%. Head is the 40 degrees 33”

Item ID: 33905

Timbco barsaw head. Cummins 8.3L engine. John Williams http://www.kfia.org/ nothing! (‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx j@lumbermens.co fully plated. Excellent conditions, turn-on ready! Contact: JOE

DESIGN DIRECTOR Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

210D Knuckleboom Loader MAILING ADDRESS on Truck

Needs

Email: Joe@lumbermensco.com THE PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 709 Fri, 6 Oct 801-362-2170 - Sun, 8 Oct

Cambridge, Ohio www.ohioforest.org

‘97 Timberjack 240D

** INFO LINK** Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

P.O. Box 1916 Item ID: 6694

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

replaced motor last year, 12,817 frame hours, leak on (888) 401-6367 valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs SUBMISSIONS good, clutch AD is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, May be sent to trailer frames great loader and truck!

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Columbia, TN 38402-1916

morris@lumbermens.co

Contact: MARK POSTMASTER Email: Mark@lumbermensco.com Send888-401-6367 address changes to: Phone: EXT 708 Lumberman's Exchange 702-875-2703

Hydro-Ax EX 29 Menominee Saw511 ..................... Baker ...................................... 5, 7 ‘99 Item ID: 13799 Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Contact: SAM Brute Force Mfg. ..................... 31 Sam@lumbermensco.com Midwest Sharpening.............. 26 Email: Phone: EXT 702 Buck Equipment (AIM) ........ 36 888-401-6367 Morbark ..................................... 9 Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CWItem Mill-ArmorHog .............. 17 ID: 9450 published monthly by Woods CW Mill-Hogzilla ................... 15 1989 Model with factory 5.9 Cummins engine, power shift Publishing, P.O. Box 1916, Columbia, TN 38402. All rightstransmission, Hercules winch. Working daily. Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Email: Austin@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Bell Ultra C content submitted by advertisers Item ID: ............................. 1025 Hurst Boiler 14 and writers, the Lumberman's Exchange, its principles and 1996 model with Joystick control and Koehring Iron Bull ................................... 21 associates, are not held liable for Head. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent. Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

Rotochopper............................ 40

P.O. Box 1916 Columbia, TN 38402

TIMBERJACK 230A

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Row Electric ............................ 20 Sawmill Exchange .................. 11

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Tigercat 230Cuts 130 in ve1y good condition, Item ID: 71822 feet a minute also has CLT presses. (‘99) over-hauled.

Gear box and turntable are heat good, decent tires. 5.9L Cummins, joystick controls, SCTR &W 125 Band Mill with delimber. No bucksaw. Owner upgraded.

Item IDleaks, 13876. Austin NEW, no no oil burning. x703 A/C -

Caterpillar generator - Low hours Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.709 track 801-362-2170 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage

Hydro-Ax 470 Feller Buncher

drive, hydItem pac for ID:carriage, 9252

2230 hours cab, two tires 80% two 60% solid machine sawyers computer controls,

couple pins in head could be changed one

minor hydraulic very little drives leak really cabinet with leak electronic fortight

carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39

'94 John Deere 548E Thomas Industrial Controls ..... 10

Item ID: 14185 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

1991 Timberjack 450B Item ID: 1826

New pins & bushings. Tight skidder all around. Ready to drag some wood.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 800.S48.6914 931-797-8029 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

BARKO 495ML

MARKETING DIRECTOR

Donna Heninger

bells and whistles, its a production

Escanaba, Michigan

Quadco 22B Hot Saw Head

“Precision Under Pressure”

CAT 518

Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been used toWebsite cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 97335

(11.7K hrs) (‘85 model) One original owner. It’s got a 4 cyl CAT engine, motor rebuilt 5yrs ago (1K hrs ago). Tires are at about 20% tread left, they skid fine. Winch works great, engine starts right on, no blow-by issues. Needs nothing, good reliable machine.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘93 Barko 180B

‘16 Halverson H140 Timberjack 380C Grapple Item ID: 14077 Item ID: 69901 Austin Skidsteer (DEMO)5.9 Cummins, 12Contact: valve, 4 speed Clark transmission 4 forward 4 reverse, ex-

VALMET 840.2 FORWARDER Item ID: 9770

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.

Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

ternal tranny cooler, 28L’s, tranny less than 1000 hours, motor redone no blow by, centers redone recent, no leaks, dry very minor seep on valve body and grapple controls. Rear ends redone a year ago, full time 4 wheel drive, John Deere winch, good winch, strong winch! Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

L O G G I N G

Timberking 458 Forwarder Item ID: 171

Tigercat T240B Item ID: 4266

2005 model with 17,750 frame hours. Had new engine 13428 Ln. 1000 // hours PO Box and new super grip Victory grapple installed ago. Working daily

124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition. Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!. Item worth ID 13421. Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

John Deere 640C

Sam x702 Item ID: 2539

Timberpro 735TL Item ID: 14279

‘83 John Deere 4850

2011 timber pro 735B 11800 hours, 20" quadco hotsaw, tracks/undercarriage 35% no leaks dry, no issues, everyday runner heat/air both work fire suppression system new goal drive new swing turner all hard stuff redone oil Item 14073 change everyID: 200 hours grease everyday

Contact: Austin

Contact: MARK Ph: (888) 401-6367 x703 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703 with 1700 hours, in very good

Firewood Processor This very is well Hard to find 640C model, that’s-been maintained, tight center section, no leaks, a Chomper Model 16 PDA comes with a set of chains.

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

1999 John Deere 648G

Item ID 13644. ItemSam ID: x702 8548

FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year. Has New turbo as well.

2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot 931-797-8029 380  Issue 364

automatice Contact: AUSTIN

firewood processor

tach, oil pressure, water temp and

2000 Tigercat 845

amp Item gauges. logs up to 16”. ID:Cuts 4497

chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer. 13916. Austin x703

Best Value Portable Log

pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.

new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition. Just finished

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control. Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens  since 1986

❘

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 6603

 List  seLL  exchange  buy  save

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Volvo L50D

good. in good order. 22in Itemworking ID: 14263

kohing head. head works great. 2008 Volvo L50D and 5000 hours, bucket and forks, brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed

glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners 702-875-2703 have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

CAT 910C

Runs Great!. Item 13740. Sam Item ID:ID 14264

x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours

ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures

BELL

1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR bucksaw. NY STATE

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 8139

SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August

Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.

1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.

AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

931-797-8029 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

John Deere 650J XLT

MID-ATLANTIC LOGGING & BIOMASS 2009 model with forestry package, has 6000 frame hours, with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept Contact: AUSTIN

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

LUMBERMEN’S

MARKETING DIRECTOR

John Deere 200CLC Item ID: 706

John Williams Model with propac delimber, good (888) 401-6367 ext. 7012004 Equipment been well maintained. j@lumbermens.co Machine has Digest

DESIGN DIRECTOR Donna Heninger

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Prentice 210E

Contact: JOE

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

www.lumbermenonline.com on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367 931-797-8029 Cat 3406 140KW Genset, 12,400

801-362-2170 Cambridge, Ohio www.ohioforest.org

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

it includes two sets of Mcdonough

THE Email: PAUL Joe@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct 888-401-6367 - Sun, 8 OctEXT 709

May be sent to morris@lumbermens.co

POSTMASTER

that go up and down, with airbags,

feetJohn a minute also has CLT XLT presses. Deere 650K

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

AD SUBMISSIONS

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production

LUMBERMEN’S EquipmentItem DigestID: 480 Knuckleboom loader. Needs new batteries and Item ID 13876. Austin x703 Lexington, Kentucky also needs the small gear on the Rotobec head. PO Box 1146 It has saw and delimber hookups, but no saw nor http://www.kfia.org/ 2013 model with 4300 Hours, has with forestry package, and S& 125 Band Mill delimber. Ready to be shipped! Good machine, Columbia, TNW38402-1146 recently had new tracks, sprockets, idlers, and rollers UC. KentuckyWoodExpo.aspx gets the job done, works as it should! 1-800-477-7606 Fax (931) 388-3564 installed. Caterpillar generator - Low hours

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

in ve1y good condition, Cuts 130

KENTUCKY Item WOOD ID:EXPO 8256 Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

machine, with air strain conveyers

Item ID: 5109

around 75%

BANDMILLS & HEADSAWS

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Mfg&.............................. 32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks .................... 25 COSTS! CUT YOUR DOWNTIME AND YOUR

The Lumberman's Exchange is Against Pinching, ............................ 40 CW Mill-ArmorHog .............. 17 Rotochopper Protection Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ................... 15 and RowSolvents. Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great• Forklift Lakes Masts Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms and space. Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Loaders Hahn Machinery ...................... 3 The Paul Bunyan been made to ensure accuracy of Grapples orShow Visit ......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content•submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Delimbers • Dozer Blades and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable& forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors or omissions. Reproduction, Offers Maximum Protection, Lower Reduced KilgoreCosts, Saw ............................. 22 Distributor UniversalInquires Refiner ................... 23 Welcome in whole or part, is prohibited Downtime and Lesswith Spills! Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

The Tree that Started it All!

Tigercat 845

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

John Deere 648E Grapple Skidder Item ID: 82561

John Deere 648E grapple skidder, new crate motor with very few hours, 28L’s about 50%, 1 set bear claws, dry machine, no leaks, recently repacked cylinders, tight centers, very well maintained machine! Call for more pictures!

TIMBERJACK 380

Item ID: 2323 ‘16 Halverson H140 Has the dual 100in. Exco grapple. Transmission is Eaton 3 speed powershift. Engine has a new Skidsteer (DEMO) injection pump. Tires tread 40% on three tires, 10% on the oneID: tire. Good machine for the price and for Item JW-909632 the conditions. Contact: J Williams Contact: JOE401-6367 x701 Ph: (888)

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 John Barko Deere 444 180B Wheel Loader

Item ID: Item 14077 ID: 524 Contact: Austin breaks need pressure cylinder, needs seat, crack in windshield, comes401-6367 with forks and bucket. Works great! Ph: (888) x703 Call for more pictures Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

JD 648G III

96’ Hydro ax 611E

Item ID: 87294

Item ID: 4654

(8.8K hrs) (‘06) New wiring harness and injectors. The grapple won’t rotate all around, but goes up & down, pulls wood just fine. Motor was reman. 4K hrs ago (approx. 4yrs ago). Owner is getting out of logging.

‘95 John Deere C6 Contact: JOETree Farmer Email: Joe@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Phone: 888-401-6367 EXT 13920 709 OR 801-362-2170 Item ID:

‘13 KMC 2500 Track Skidder

L O G G I N G

01’ Timberjack 460D Item ID: 345

BARKO

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT160B 703 OR 931-797-8029 1994 Barko - Electric

off onto a conveyor. This is a very

2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer. Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS CAT 515 Grapple Skidder

Brewco Saws - Two Brewco Saws Item ID: 14257

in excellent condition. Runs great.

around 7000 hours strong winch 50% rubItem IDEverything 13644. Sam ber 28's. worksx702 as it should. Woods ready, call for video!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot 702-875-2703 380  Issue 364

Firewood Processor - This is a Chomper Model 16 PDA

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes amp gauges. Cuts logs up to 16”.

approximately 1500 hours. Hour new for $32,500. Item ID 13865. Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have

BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

but electronic option is available. 50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained. Item ID 13294.

homemade processor with a 10’

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple,

chain and kicker that all runs

saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition. Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control. Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens  since 1986

❘

Item ID:head 14232 kohing head. works great.

hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info

runs as should ready to go, dual arch, good winch

Firewood Processor - This is a

good. in good working order. 22in ‘11 John Deere 753J

John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185. Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage

Value! PA. Item ID 12062. Sam x702

Item ID: 52342 (excellent condition.). Item ID

2011 model portable loader, has 8,631 hours on it. 13238. Chris x700 Woods ready.

tach, oil pressure, water temp and

‘14 John Deere 843K

quality chips with patented ‘Cone’

grapple, 5,000 original hours. Knuckle Boom Loader

Sam x702

Item ID: 5458

condition. Easily produces high

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere

Franklin Q70

with 1700 hours, in very good

Cat 939C

Item ID: 52119

Item ID: 14078 98’ model with 9000 hours, and new undercarriage. Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Contact: AUSTIN

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Contact: Austin Ph: (888) 401-6367 x703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

153 Fabtek Processor

CUMMINSItem continuous grapple. ID: 8763 Runs Great!. ID 13740. Sam13133 2001 Fabtek 153, 4 Item roller fabtek harvester head,

frame hours, less than 500 hours on rebuilt motor,

x702 newer sprockets, new turn bank, resealed valve bank,

ready to work! Entire spare parts head included! Call for more pictures!

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brand Mark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR** Prentice 180 Item ID: 7822

1994 Model with 10,000 hours, joystick control, 6 cylinder Cummins motor, tight turn NYtable, STATE WOODSMEN'S FIELD DAYS and plumbed for a bucksaw. Work ready

Fri, 18 August - Sun, 20 August

Contact: AUSTIN Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

Cat 525

'03FOREST 670 Hydro-Ax SOUTHWEST PRODUCTS EXPO Item-ID: 14138 Fri, 25 August Sat, 26 August

Item ID: 14155 Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that

Hot Springs, Arkansas 2nd owner around 8000 hours, call for more info www.arkloggers.com

it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has published 702-875-2703 a monthly circular

Contact: MARK 72ND ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 LOGGING & HEAVY EQUIPMENT EXPO 702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 703 expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Item ID: 14187 http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams 2004 CAT 525B

(888) 401-6367 ext. 701 Item ID: 14204 j@lumbermens.co

Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Shrink Wrap ** INFO LINK** FireWOOD/WaSteWOOD

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the 702-875-2703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in1994 ve1y good condition, Cuts 130B Timberjack 240 Item ID:74044 feet a minute also has CLT presses.

Item IDSkidder. 13876. Austin cable 7,225x703 hours on a rebuilt engine. Winch S & W 125 Band Mill with works good. Woods ready. Caterpillar generator - Low hours Contact: on the mill,WALKER electronic computer Set Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

445D drive, hydTimbco pac for carriage, Item ID: 1326 sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet drives hours, UC iswith at 40%,electronic cab has heat & ac. New for pumps,

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Corley Mfg 32 Multitek Sell Your WOOD –.............................. $300/cord or ................................... More! 12

Double or triple your profits by shrink wrapping wastewood - foreCW Mill-ArmorHog .............. 17 Rotochopper............................ 40 wood with WOOD-PAKer! Attractive various size packages can be CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 obtained with our high production, easily operated and affordable Dyna Products ........................ 35 Sawmill Exchange .................. 11 machines. Eight machines available. The ideal equipment for producEmpire Hydraulics ................... 8 Select Sawmill ......................... 19 ing square bundles-palletizable for ease in storage and transporting. Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Inquire for free details. Video and Package samples at nominal fee.

BANDMILLS & HEADSAWS

dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours. 10 hours on this machine since it

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

B & B Manufacturing Hurst • 3007 West River Road • Olean, NYControls 14760 Boiler ............................. 14 Thomas Industrial ..... 10

Toll Free 1-800-654-5320 Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24 WoodMizer ................................ l E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage

‘97 Timberjack carriage 360Cknees, husk including

2001 model and is a 2 owner machine with 10000 frame overall machine is mechanically sound.

Contact: 48" bottom saw and 36" top saw Item ID:AUSTIN 14044 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: Sam 931-797-8029

STACKING RAC

Ph: (888) 401-6367 x702

CAT 518 Grapple Skidder Item ID: 3577

John Deere 548D Cat 518, approx 12,000 frame hours, 1500 on rebuilt engine and transmission, center pins are tight, dry maItem ID: working 14024 chine, currently 28L's 30%, seller has 23.1's at 80% or better thatSam he can include for an extra $4k, seller Contact: is retiring from logging. Call for more pictures! Ph: (888) 401-6367 x702

Contact: MARK Email: Mark@lumbermensco.com Has a 2000 hour warranty. It comes www.BakerProducts.net Phone: 888-401-6367 EXT 708 800.S48.6914 702-875-2703 I S73.663.7711 mounted on 30.5 tires at 95%.

with401-MENS a 22” tower head. ❘ Comes  (888) NO.Item 23 L! 401-MENS ID 13864. Sam x702 2015 John Deere 748L - This is

L O G G I N G

'04 John Deere 700H Lexington, Kentucky

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS

Item ID: 98754

Heat works. Air needs charging. Tires inc., great shape tires chains to go with it bear claws. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 CAT 525C

Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Item ID: 14203

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

John Deere 444k Item ID: 9302

2009 model and is a one owner machine with 4900 original hours. Condition is like new. Ready to go to work.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Timbco 415 w/Fabtek Head

‘13 KMC 2500 Track Skidder

L O G G I N G

Item ID: 8837

‘89 Timberjack 380A

2001 timbco 415 fabtek 5head reabuilt head 5900 hours on rebuilt John Deere engine approx 22k frame 90% tracks and undercarriage. Ready to work. Call for 13428 Victory Ln. // PO Box more pictures!

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

124 Adams Center, NY 13606 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Mid 90’s Husky Brute 335XL

ID:13421. 14088Sam x702 capacity!.Item Item ID

off onto a conveyor. This is a very Item ID: 7701 Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820. John Deere 648G3 Grapple Skidder 2005 John Deere 648G3 grapple skidder approx 17k frame hours brandFirewood new cradle, cylinoid on the turn on grapple Processor - This is needs replaced, o ring on the front by the hydraulic pump leaks a little bit, new head block, new crank, valve bank redone, 16"As PDA transmissionais Chomper tight, no blow Model by in motor. clean a motor as you'll see" dry machine, currently working. Call for more pictures!

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

automatice firewood processor

Contact: MARK with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts. Purchased Winch Newand Hyd Park Brake. 13916. Austin x703 for $32,500. Item ID 13865. Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great. SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition. Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours! 2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 380  Issue 364

made the best valued log splitter. John

low hours. Control panel includes tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges. Cuts logs up to 16”.

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available. 50% or better. 475 hp Cummins Contact:Diesel. SAM 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2004 Bandit Beast425 Model 4680 2005 Timbco EXL Item ID: 14275 3412 Caterpillar Diesel engine

with 2015 sp761lf head 1000 hrs. hours Mill on head withharvester 850 HP. 5300 inand 2015 log deck. Has a hydraulic grapple, dasa 5 computer system frame hours 10,900 Undercarriage 75% no leaksgood dry, rebuilt final drive the other final drive10 is new, chain and kicker that all runs off condition. Just finished engine has ECM, new swing drive gear box, new implement pump

of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that

Lumbermens  since 1986

❘

Acre clearing job, ready to work!

Contact: MARK Email: Mark@lumbermensco.com Remote control. Big production kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR**

Ecolog 590D Item ID: 874

L’S FIREWOOD PROCESSORS 2011 model with 12800 hours, has Logmax 6000B series Head. Lots of recent work done. NY STATE Work ready!

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/ '94 CAT 518

Grapple Winch

PRODUCTS Timberpro TF 830C SOUTHWEST FOREST Item ID: 99807 EXPO The Tree that Started it All!

Item ID: 8077

Fri, 25 August - Sat, 26 August

2018 Timberpro combo 830c tier 3. Has 2018 SP 761 danglehead with top saw and 2018 supergrip 360 bucket, 2 sets of tracks, fire suppression, pre heater, LED lights, 700 hours working daily, under warranty until March of 2019

12k hours runs great tight center Hot Springs, Arkansas section www.arkloggers.com Contact: SAM

4000 SERIES

72ND ANNUAL GREAT LAKES Contact: MARK Email: Sam@lumbermensco.com Email: Mark@lumbermensco.com Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 702 Phone: 888-401-6367 EXT 708 OR 702-875-2703 published a monthly circular Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.

Selma, North Carolina BELL’S FIREWOOD PROCESSORS www.midatlantic-logging-biomass

Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

John Williams • 67 HP CAT Diesel (888) 401-6367 ext. 701 Engine Item ID: 14208 j@lumbermens.co • 44” Circular Saw

feed deck 20 foot out feed deck Contact: MARK

Email: Mark@lumbermensco.com with 44888-401-6367 inch wheels, and Phone: EXT 708all ORthe

bells and 702-875-2703 whistles, its a production

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

4000 SERIES Danzco Delimber inPT20H ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO Item ID: 14134 feet a minute also has CLT presses. Fri, 15 Sept - Sat,720B 16 Sept TIGERCAT

Lexington, Kentucky Item ID: 542 http://www.kfia.org/ This feller buncher comes with a high speed "Quadco" cutter. Odometer shows 7000hrs. 500hrs ago a new motor (rebuilt) KentuckyWoodExpo.aspx was installed. 90% tires tread. The A/C doesn’t work. It's been

BELL’S FIREWOOD PROCESSORS Many Models & Options to Choose From! THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct BELL’S FIREWOOD FIREWOOD PROCESSORS PROCESSORS Cambridge, Ohio EQUIPMENT REPS • 20” Diameter Contact: AUSTIN DESIGN DIRECTOR Capacity Email: Austin@lumbermensco.com • SingleDonna JoystickHeninger Phone: 888-401-6367 EXT 703 Control

it includes two sets of Mcdonough

parked for about 4-5 months. READY TO GO!!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

• 30 Ton Splitter Cylinder Sam Wall

Excellent condition, motorx703 rebuilt about Item ID 13876. Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400

www.ohioforest.org Many Models & Options to Choose From! hours ready to run. Item ID 13434. 401-6367 ext. 702 • 67 HP CAT(888) Diesel 4000 SERIES Sam x702 • 67 HP CAT Diesel 4000 SERIES sam@lumbermens.co Engine Engine CARRIAGES & DRIVES FIREWOOD TUMBLER • 44” Circular Saw • 44” CircularWoods Saw Austin • 20” Diameter • ext. Sturdy • 20” Diameter 2010 Cardinal HD Carriage (888) 401-6367 703 HSS Steel Welded FIREWOOD TUMBLER Capacity Capacityaustin@lumbermens.co • Sturdy HSS Steel Welded • 4’ Diameter Barrel Carriages (Sawmill) - Cardinal • Single Joystick Many Models & Chute Options to Choose From! 4000 •SERIES 4’ Diameter Barrel • HP CAT Diesel • Single Joystick 4000SERIES • 67 67Control • Clean Out MAILING ADDRESS • Clean Out Chute Carriage line it includes carriage Engine Control •Engine 30 Ton Splitter • Removes Debris & Bark as large B & B&Mfg . ............................... Gauge ............................. 28as 2 ¼” • Removes Debris Bark as large as 218¼”M&F P.O. Box 1916 • Circular • 44” 44” Saw Cylinder • 30 Ton Splitter with Lift onboard log turners, carriage • Works with all of our Double chain Hydraulic conveyors TN 38402-1916 • • 20” 20” Diameter • Works with allB.of Double chain Hydraulic Lift Mill, conveyors Cylinder Columbia, • Optional Honda Pack Available H. our Payne .............................. 16 Meadows IncPower . ................ 33 drive, hyd pac for carriage, Capacity Capacity (888) 401-6367 • Optional Honda Power Pack Available Barko 495B • Single Single Joystick • Menominee Saw ..................... 29 FIREWOOD TUMBLER Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS Item ID: 44764 Control • Sturdy HSS Steel Welded • 67 HP CATControl Diesel 4000 SERIES May be sent to cabinet electronic drives forJohn • 30 30 Ton Splitter Machining •Bell's 4’ Diameter Barrel..................... 27 Metal Detector's Inc . .............. 30 2016 modelwith with 3900 hours, csi delimber on big Engine • morris@lumbermens.co Cylinder trailer fully plated. Cylinder • Clean Out Chute • 44” Circular Saw carriage knees, husk including Many Models & Options to Choose From! Force Mfg&. ..................... Sharpening.............. 26 •Brute Removes Debris Bark as large31 as 2 Midwest ¼” • 20” Diameter POSTMASTER Contact: 48" bottom AUSTIN saw and 36" top saw • Works with all of our Double chain Hydraulic Lift conveyors Capacity Email: Austin@lumbermensco.com Made In Buck Equipment (AIM) ........ 36 Mor bark ..................................... 9 Send address changes to: • Optional Honda Power Pack Available Many Models & Options to Choose From! Canada Phone: 888-401-6367 EXT 703 • Single Joystick Lumberman's Exchange 931-797-8029 Corley Mfg .............................. 32 Multitek ................................... 12 Control P.O. Box 1916 • 30 Ton Splitter FIREWOOD TUMBLER Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 • Sturdy HSS Steel Welded Cylinder

BELL’S FIREWOOD PROCESSORS

** INFO LINK**

Many 4’ Diameterto Barrel Many Models Models &&• Options Options toChoose ChooseFrom! From!

MadeCW In Mill-ArmorHog Please The Lumberman's Exchange is Rotochopper ..............Call 17 for Details ............................ 40 • Clean Out Chute Canada published monthly by Woods • Removes Debris & Bark as large as 2 ¼” FIREWOOD TUMBLER CW Mill-Hogzilla ................... 15 Hydraulic Row Electric ............................ 20 Publishing, P.O. Box 1916, • Works all of our Double chain Lift conveyors • Sturdy HSSwith Steel Welded In Power Pack Available • OptionalMade Honda Columbia, TN 38402. All rights • 4’Dyna Diameter Barrel or Canada visit us online www.bellsmachining.com Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial • CleanFIREWOOD Out Chute Financing Available TUMBLER submissions are used at the Empire Hydraulics ................... 8 as Select FIREWOOD TUMBLER Debris Bark as large 2 ¼” Sawmill ......................... 19 • Sturdy HSS&Steel Welded discretion of the publisher and may • Removes • Sturdy HSS Steel Welded • Works allMfg of our Double chain Hydraulic Lift conveyors • with 4’ Diameter be edited for purposes of clarity Great . Barrel .................... 34 Smith Sawmill ........................... 4 • Lakes 4’Honda Diameter Barrel • Clean Out Power Chute Pack Available and space. Although all efforts have • Optional • Machinery Clean Out Chute TheasPaul Hahn ...................... • Removes Debris & Bark as3large 2 ¼”Bunyan Show ......... 39 been made to ensurePlease accuracy Call of for Details • Removes Debris & Bark as large as 2 ¼” content submitted by advertisers • Works with all of our Double chain Hydraulic Lift conveyors Made In Works............................. with all ofPower our Double chain Hydraulic conveyors Hurst Boiler 14 Available Thomas IndustrialLift Controls ..... 10 and writers, the Lumberman's ••Optional Honda Pack Canada FIREWOOD•TUMBLER Optional Honda Power Pack Available Exchange, its principles and IronHSS BullSteel ................................... 21 Union Grove Saw & Knife.. 2, 37 • Sturdy Welded or visitareusnotonline www.bellsmachining.com associates, held liable for • 4’ Diameter Barrel errors or omissions. Financing Reproduction, Available Kilgore Saw ............................. 22 Universal Refiner ................... 23 • Clean Out Chute in whole or part, is prohibited with • Removes Debris & Bark as large as Lignomat ................................. 24 2 ¼” WoodMizer ................................ l out written consent. Please Call• for Details Works with all of our Double chain Hydraulic Lift conveyors Made In ©2017 Woods Publishing • Optional Honda Power Pack Available Canada

1-888-995-1965

STACKING RAC

Many Models & Options to Choose From!

Please Call for Details

1-888-995-1965 888-995-1965

nline www.bellsmachining.com Financing Available

1-888-995-1965  SELL YOUR EQUIPMENT TODAY

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

l§ SELL EQUIPMENT TODAY MadeYOUR In or visit us online www.bellsmachining.com Canada Made In Canada Financing Available

❘

 24/7 SUPPORT 0 SUPPORT

Tigercat 604 Cable Skidder Item ID: 6552

approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

• 67 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter Capacity • Single Joystick Control • 30 Ton Splitter Cylinder

Contact: SAM Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702

International TD15 BELL’S FIREWOOD PROCESSORS 4000 SERIES Bull Dozer MARKETING DIRECTOR

Item ID: 1876

BANDMILLS & HEADSAWS

two 2001 660 timberjack grapple skidders. Working machine has tigercat bunching grapple on it, dual arch machines, one has two nice double diamond chains, dry Machines, 3000 Danckaert Band Resaw - Roughly hours on rebuilt 8.3 cummins engine, brand new $8k dollar hydraulic pump 1 1/2 week ago, the other machine 10 hours on this machine sincehydraulic it pump is at approx 200, CAB IS BURNT, everything else on machine is in good working order. Selling only because mahas rebuilt, it has 24foot chinesbeen are too big. Package Only Call foramore picturesin

machine, with air strain conveyers '13 John Deere PROCESSORS 548G III BELL’S FIREWOOD that go up and down, with airbags, Item ID: 8789

PUBLISHER

ADVERTISING SALES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com 660 Grapple Skidder

“Precision Under Pressure”

892 Valmet Forwarder

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 4040

1995 Valmet 892 forwarder Volvo td6 motor, motor rebuilt appox 4000 hours ago, dry doesn't burn any oil Put sure-grip controls in it and all new windows resealed valve body for hydraulic functions and resealed the jib cylinder bought just for a backup machine hardly used it Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours! ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder. 2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 380  Issue 364

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

chain conveyer, 8 way splitter,It on has

Timberjack 1270C amp gauges. Cuts logs up to 16”.

Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000

computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865. Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT '92 CAT 518

Item ID: 14198 1999 Bandit 1900 Tracked Disc

1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine. Callor forbetter. video 475 hp Cummins but electronic option is available. 50%

Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

CurrentlyItem has ID 3316 hours. capacity!. 13421. Sam x702

SamItem x702 ID: 7698

‘05 Gehl CTL 70

10’ John Deere 648H

Item ID: 14110

off onto a conveyor. This is a very

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) x703 90’ CAT 401-6367 213 Excavator

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

well built processor. Item ID 13820. '94 CAT 518C Cable Skidder

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185. Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

525Dgrapple. CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702

30.5 32 tire w/85% tread remaining. Dual arch with a winch. Being used everyday! No issues! Very nice machine! Clean and tight!

BELL

1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and 801-362-2170 ❘

 LumbermensCO.com

** CALENDAR** 93’ Prentice 210 Item ID: 14216

AUSTIN NYContact: STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: 888-401-6367 EXT 703

Boonville, New York www.starwebhosting.net/woodsmen/

16’The CATTree 545D

Item ID:Arkansas 14217 Hot Springs, www.arkloggers.com Contact: AUSTIN

Item 14211 thatID: Started

it All! Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703

Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 703 expo.com/

pressure guides. Top Casting wheel

in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

Item ID: 1977 http://www.kfia.org/ KentuckyWoodExpo.aspx Contact: AUSTIN

(888) 401-6367 ext. 701 Item ID: 14212 j@lumbermens.co

it includes two sets of Mcdonough

is an extremely accurate machine

Timberjack 230 Lexington, Kentucky

MARKETING DIRECTOR

that go up and down, with airbags,

is supported on both sides. This

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

JohnDeere Williams843K 12’ John

DanckaertItem BandID: Resaw - Roughly 14170 10 hours on this machine since it 85% Undercarriage. has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and whistles, its a production machine, with air strain conveyers

07’ Tigercat MID-ATLANTIC LOGGING724E & BIOMASS Item ID: 14218 Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

BANDMILLS & HEADSAWS

2004 Timbco 445EXL

John S &‘80 W 125 BandDeere Mill with540B Item ID: 11345 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400

New "BUILT-RITE" Tumbler! Email: Austin@lumbermensco.com Phone: EXT 703 OR THE888-401-6367 PAUL BUNYAN SHOW 931-797-8029 Fri, 6 Oct - Sun, 8 Oct

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

hours ready to run. Item ID 13434.

New From "Built-Rite" CARRIAGES & DRIVES ** INFO LINK** Splits Blocks MAKES PERFECT PIECES Sam x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

for Bundles, B. H. Payne.............................. 16 Cookstoves, Baker ......................................5, 7 AD SUBMISSIONS May be sent to and Campwood Bell's Machining ..................... 27

morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates,FIREWOOD are not held liable for TUMBLER errors or omissions. Reproduction, in whole or part, is prohibited with info@built-rite.com out written consent. ©2017 Woods Publishing

M&F Gauge ............................. 28

up to 16" in diameter drive, hyd pac for carriage, in to 16 pieces Menominee Saw ..................... 29 sawyers cab, computer controls, withcabinet one stroke! with electronic drives for Metal Detector's Inc. .............. 30

Meadows Mill, Inc. ................ 33

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Only

Corley Mfg .............................. 32 MultitekSPLITTER ................................... 12 16 WAY BUNDLEWOOD

8,995!

Carriage line it includes carriage

with onboard log turners, carriage

carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ...................www.built-rite.com 23

• 4' x 8' Barrel 18" wide Belt with ............................ CW Mill-ArmorHog • Angle Iron .............. Bars 17 Rotochopper 1" Cleats, Remote 40 For more efficient15 Row Electric Control Winch 20 CW Mill-Hogzilla ................... ............................ x it8’tobarrel removal of bark 4’ diameter Raises 11' Dyna Products ........................ 35 Sawmill Exchange .................. 11 and dirt Hydraulic drive, Power height. Pack available Empire•Hydraulics ................... 5 H.P. Power pack 8 Select Sawmill ......................... 19 Available Compare—Dollar for Dollar Your Best Firewood Processing Option! Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4

Lignomat ................................. 24

800-757-2520

750 East Hill Rd. VT 05149 BR 16Ludlow, INTEGRATED FOLDING CONVEYOR

800-757-2520

Ludlow, VTinfo@built-rite.com www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

Firewood Processors * Wood Splitters * Conveyors * More!  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT  (888) 401-MENS 401-MENS l§ SUPPORT ❘ L!

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

NO. 27

L O G G I N G

SOUTHWEST FOREST PRODUCTS EXPO Fri, 2011 25 August Sat, 26 August John- Deere 648H

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

John Deere 648G III

“Precision Under Pressure”

PRENTICE 410EX

Phone 315.284.4126Item ID: 2929 Fax (12K hrs) Front tires new, back tires 75% remaining tread. 315.849.2045 Transmission has an issue: it is s as if every other gear Website didn't work (2nd, 4th... etc...), therefore going to sell as-is www.empirehyd.com (cheaper) Email Contact: JOE info@empirehyd.com Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 3280

Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson H140 Skidsteer (DEMO)

BELL Super T Item ID: 6145

‘93 Barko 180B Item ID: 14077

‘93 John Deere Contact: Austin 548E

14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

It has a Deutze engine, lever controls, undercarriage is NEW along w/motor & transmission re-done approx. 1,000hrs ago. It has a 32in. BELL head. In really great conditions and being used daily. A/C - heat works good. Everything in working order.

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124

Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam611 x702Ex-Hydro Ax ‘98

Firewood ItemProcessor ID: 13948- This is

‘05 Gehl CTL 70

‘83 John Deere 4850

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with

low hours. Control panel includes

tach, oil pressure, temp and 210 Terex Wheelwater Loader

Item ID:Cuts 14283 amp gauges. logs up to 16”. 2013 210 terex loader . 1560. Excellent chain conveyer, 8 way splitter, on One owner and comesHrs with all condition everything works as should! 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased 13916. Austin x703

Best Value Portable Log

Contact: MARK new for $32,500. Item ID 13865. Email: Mark@lumbermensco.com Phone: 888-401-6367 Splitter Sam x702 EXT 708 OR 702-875-2703

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

01’ Ponsee Bison in excellent condition. Runs great. Forwarder

Value! PA. Item ID 12062. Sam x702

FIREWOOD PROCESSORS Comes with a set of tracks.

log deck. Has a hydraulic grapple,

Item Sam ID: 14109 Item ID 13644. x702

2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703 380  Issue 364

Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703

(11.5K hrs) Comes with the 426 CTR delimber. Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric 801-362-2170 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily

'01 John Deere 648G3 Item ID: 90899

The Tree

Excellentthat Condition Low Price! Started

www.arkloggers.com Item ID: 14213

been used around a sawmill.

Contact: SAMit All!

Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 931-797-8029

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 JOHN sam@lumbermens.co

MAILING ADDRESS Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT .709 OR 801-362-2170 18 B & B Mfg ............................... P.O. Box 1916 Columbia, TN 38402-1916 B. H. Payne .............................. 16 (888) 401-6367

AD SUBMISSIONS

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

Dual arch, tires tread 30%, 30.5 This was a repo from in Alabama. Austin Woods A/C not working properly. Owner bought it from them and used it (888) 401-6367 ext. 703 for about 18mo. Nothing wrong with it. Grapple needs new packing ($600 fix). Good skidder, reliable! austin@lumbermens.co

Contact: JOE

Contact: AUSTIN

Item ID: 746

KubotaBaker SVL-95 2s Item ID: 4861 ...................................... 5, 7

This is in LIKE-NEW conditions. Only 420hrs. It’s currently on a small need it any longer. It has high flow joystick May be sent to job. Owner doesn’t Machining ..................... 27 controls, radio, Bell's A/C - heat works. It has the load sensing closed center hydraulics with parallel loader control valve. Very tight morris@lumbermens.co machine. In addition to the diamond forestry mulching head, owner Brute Force Mfg. ..................... 31 is including a blue diamond grapple and a bucket.

POSTMASTER

Send address changes to: Contact: JOE Buck Equipment (AIM) ........ 36 Email: Joe@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 709 OR 801-362-2170 32 Corley Mfg .............................. P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

John Deere 700J LGP

Item ID: 9737 CW Mill-ArmorHog 17 6mo. ago a new head gasket, water pump,.............. alternator and

The Lumberman's Exchange is (7K hrs) published monthly by Woods batteries have been put on. Undercarriage is at 60-65%. 30" wide pads. Log arch and winch work great. Winch was barely used. A/C15 CW Mill-Hogzilla ................... Publishing, P.O. Box 1916, heat works well. Very good machine, no leaks, dry and ready to clear! New front idlers, too. Only selling because too many payments for Columbia, TN 38402. All rights the use it's been Dyna made of. Products ........................ 35 reserved. All editorial/ advertorial Contact: JOEEmpire Hydraulics ................... 8 submissions are used at the discretion of the publisher and Email: may Joe@lumbermensco.com EXT 709 OR 801-362-2170 be edited for purposes of clarityPhone: 888-401-6367 Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy ofTimbco 425MachineryItem ID: 5627 3 content submitted by advertisers hrs) Ledgering systemBoiler doesn’t ............................. work, trail wheel needs to 14 be Hurst and writers, the Lumberman's (11K fixed. It does has new wiring and a new sensor. The undercarriage is Exchange, its principles and at 40 with a 5.9 engine. A/C - heat works! There's a computer glitch Ironwhere Bull (waiting to be fixed) to ................................... tip the head back, you have to 21 hit associates, are not held liable foranother function and then the head will move back. The computer system has been checked and re-calibrated by Woodland Equipment errors or omissions. Reproduction, Kilgore Saw ............................. 22 in (MI) 18mo. ago. It has a Risley processing head. in whole or part, is prohibited with Contact: JOE Lignomat ................................. 24 out written consent. Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Item ID532 13876.CAT Austin x703 Feller

THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

DEERE 648G Series III

that go up and down, with airbags,

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx

Item ID: 13851

has been rebuilt, Contact: MARKit has a 24foot in Email: Mark@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the 702-875-2703 bells and whistles, its a production

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES

Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, Menominee Saw ..................... 29

sawyers cab, computer ‘05 CAT TK560 controls,

cabinet with electronic Item ID: 14004 drives for carriage Midwest Sharpening..............Contact: 26 SAM knees, husk including 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXT 702 Multitek ................................... 12

Metal Detector's Inc. .............. 30

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4

John Deere 437E The Paul Bunyan Show ......... 39

Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.

Ponsse Ergo

Item ID: 7720

Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37

12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewing system for crane rebuilt 2k hours ago, main pump resealed about 1k hours ago, comes with set of tracks! Currently working, buying newer. Call for more Pictures

Universal ................... 23 Contact:Refiner JOE Email: Joe@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 709l 801-362-2170

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703

Owner is getting out of the logging business and

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext. 23.1 26.701 In excellent (888) 401-6367 condition!

BANDMILLS & HEADSAWS

wasn’t purchased or used until 2015 was a “leftover” under 1k hours, 8’ wide blade, backhoe, 3 Danckaert Band Resaw buckets 24”, 30”, 36” one owner- Roughly longer boom! LIKE NEW on this machine since it 10 hours

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item ID:DIRECTOR 985 MARKETING

Item ID: 14158

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '11 John Deere 85D www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 850J Dozer

'12 CAT 573C Feller Buncher

Right around 3500 hours, excellent condition, brand new undercarriage, sprockets, and rollers. Very well maintained. Call for more info!

with SC-57 head, just over 2400 hours, dry, tight, very well maintained, everything works and operates as it should. Call for more info

Item ID: 14192

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Item ID: 14193

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632

Contact:MARK J Williams Contact: Email: Mark@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 708 702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available. Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks 380  Issue 364

Lumbermens  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

in good working order.III 22in tach, oil pressure, water temp and Johngood. Deere 648G Series amp gauges. Cuts logs up to 16”.

kohing head. Item ID:head 4351works great.

& transmission has been rebuilt. Front and rear Item ID 13185. Sam x702 ends have been gone thru. Cold air/heat works, radio but needs antenna! Rear- new tires are NEW, front 1999 an Barko 160D engine with tires 70% tread.

One owner and comes with allMotor works manuals and receipts. Purchased

new for $32,500. Item ID 13865. Sam x702

approximately 1500 hours. Hour

Contact: JOE Email: Joe@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 709 OR 801-362-2170

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

'92 CAT 518C Cable Skidder

delimber, has been rebuilt. Itemgrapple ID: 14107 Boom cylinders have minor leaks. Chipper - Cat Under Carriage at Hard to Find “C” model in great shape! Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple. Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

‘93 Barko 180B

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide. Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029 Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

702-875-2703

bells and whistles, its a production that go up and down, with airbags,

& 4 in 1 bucket. Selma, North Carolina www.midatlantic-logging-biomass Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Email: Mark@lumbermensco.com

with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Item ID: 410

John Williams 95’ long frame with JD winch.ext. Skidder is in excel(888)model 401-6367 701 lent condition. j@lumbermens.co

Contact: feed deck MARK 20 foot out feed deck

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Timberjack 380C MARKETING DIRECTOR

BANDMILLS & HEADSAWS

Escanaba, Michigan

CAT 928G

PUBLISHER

ADVERTISING SALES

07’ Tigercat 620C Hot Springs, Arkansas Item ID: 14248 www.arkloggers.com

Item ID: 14077

Item ID: 14247

Grapple Skidder Currently 6303 original hours! Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in

** INFO LINK**

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

The Tree

2010that Tigercat 724E Started

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com

Phone 315.284.4126 Fax Item ID: JW-093430 315.849.2045 Website Contact: SAM www.empirehyd.com Email:Email Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 info@empirehyd.com

‘04 Fabtek 344B

“Precision Under Pressure”

'97 CAT 525 Original Cable Skidder

L O G G I N G

Item ID: 9901

One Of A Kind. Has Never Pulled A Log. Owned By An Electric Company. Deal! Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Danchaert Band Resaw Item ID: JW-909632 Item ID: 13876 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘93 Barko 180B

Item ID: 14077 604 Tigercat Contact:Item Austin ID: 7436 Ph: (888) 401-6367 x703 Good rubber and less than 4000 hours, in excellent condition!

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

D5H TSK

Item ID: 7098 LOW Hours, Excellent Condition, Very Hard To Find Dozer.

‘95 John Deere C6 Tree Farmer

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Item ID: 13920

Meadows #1 Complete Sawmill 13428 Victory Ln. // PO Box 124

‘06 CAT 517

Item ID: 13869 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 14069

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 5461

Trim Saw - 12000 10 HP motor on cutoff blade, 5 HP motor on feed chain. Like new, less than 200 hrs

‘05 Gehl CTL 70 Contact: TED

Email: Teds@lumbermensco.com Item ID: Phone: 888-401-6367 EXTJW-986495 701 or (801) 319-9351

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

Brewer 9112 Gangsaw & 4004 Item ID: 18554 Notcher 3 phase Brewer Golden Eagle gangsaw double arbor, single rubber tire auto feed for cants, like new blades and sleeves spaces, washers are all likeon new. chain conveyer, 8 way splitter, Notcher infeed & outfeed with swing arm to push material to notcher, like new notcher, sawdust conveyer as well neck as sawdust ventilation, electrical 20,000lb goose trailer. Item ID panel, ready to go unit! Call for more pictures!

Item ID: 14073 Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: MARK

Email: Mark@lumbermensco.com Best Value Portable Log Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: Austin ‘13 KMC 2500 Track Ph: (888)Shingle 401-6367Mill x703 Desjardin Skidder Item ID: 1970

Item ID: 14078 Good shape. Bought it 30 yrs ago from another owner. It did not get much use. Only used it to make shingles for Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 his home.

BARKO

Contact: TED Email: Teds@lumbermensco.com 1994 Barko - Electric Phone: 888-401-6367 EXT160B 701 or (801) 319-9351

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

Cutoff Trim Saw

S A W M I L L

‘16 Halverson H140 Skidsteer (DEMO)

Splitter

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

kohing head. works great. Cummins 275hp powerhead unit, sawdust conveyer with electric

model H360 35 HP motor Hydraulic Log Dog One owner comesProCut withsaw all blade Hydraulic Back and Stop Sterling 13Ft 11in 7/8 TS/ 1 1/4 PV 121 Peavy Hook

manuals and receipts. Purchased Contact: TED new forTeds@lumbermensco.com $32,500. Item ID 13865. Email: Phone: 888-401-6367 EXT 701 Sam x702 or (801) 319-9351

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

‘05 Woodmizer LT300 FIREWOOD PROCESSORS Item ID: 14031

2010 Shop Built Wood Processor Contact: AUSTIN - Email: It has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 703 inch tooth circle saw, 30 foot insert931-797-8029 380  Issue 364

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'16 LT40 Super Hydraulic

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Item ID: 9903

homemade processor with a 10’ One Owner! 136 hours, Tons of log deck. Has Priced a hydraulic grapple, Extra Parts. cheap! chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com unit. Has 888-401-6367 a 4’ chain saw that Phone: EXT kicks 702

Lumbermens  since 1986

❘

1995 Barko 775 B Feller Buncher

amp gauges. up to 16”. Hud-Son PortableCuts Sawmilllogs year 2016 1000 hours

Item ID: 8841temp and tach, oil pressure, water

quality chips with patented ‘Cone’ drum design. Can easily load 42’

13238. Chris x700

- Pumps recently redone. 400 hrs

- Small manufacturer in PA has

made the best valued log splitter.

(excellent condition.). Item ID

Hud-Son low hours. Control panel includes 360 Portable Sawmill

with John Deere power unit with

with 1700 hours, in very good

condition. Easily produces high

motor, Rotobec continuous

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

Talon 900 Edger

2004 Bandit Beast Model Item ID: 69924680 -

3412 Caterpillar Diesel engine 2016 Timberking talon 900 3 blade edger, only 6 hours, $16,995.00 new, Gas engine 24.5 hp Koehler. Fully porwith 850 5300 Mill in table, like newHP. Call for more hrs. pictures.

good condition. Just finished 10 Contact: MARK Email: Mark@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 708 Remote control. Big production 702-875-2703

 List  seLL  exchange  buy  save

Meadows 2 Deluxe Sawmill

on injection pump. always started Item ID: 80412

good. inonboard goodcomputer, working order. 22in deluxe new hydraulic cab control, 3 saw

miner edger, dual chain for sawdust from edger, 6 cylinder motor, 24’ live log deck, comes with good 48” and 52” blades,

saw wrench, jockey grinder for teeth, chain log turnItem ID electric 13185. Sam x702 er, mill is on wheels and is portable, 14,000 board foot sawed

in 9 hours with this160D mill! 1999 Barko - new engine with

Contact: MARK 1500 hours. Hour approximately Email: Mark@lumbermensco.com

Phone:dont 888-401-6367 EXT last 708 2 owners meter work. The 702-875-2703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple. 3645D Bandmill Item ID: 5168 Runs Great!. Item ID 13740. Sam

2000 model Baker band mill, everything works and x702 runs good on it, Baker set works, has debarker, 45hp Kubota diesel engine, unsure on hours Call for more pictures!

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Precision Scragg Item ID: 3607

Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area

it All!

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com

Sanborn Scragg Mill Item ID: 14050

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084

Woods Publishing

Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

Item ID: 14118

John Williams (888) 401-6367 ext. 701Has the Kubota Diesel Motor! j@lumbermens.co

Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger

Phone: 888-401-6367 EXT 703

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Lexington, Kentucky LT70 ‘06 Woodmizer http://www.kfia.org/ Electric KentuckyWoodExpo.aspx Item ID: 14076

AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

Now One Phone Puts You Austin Woods in(888) Touch 401-6367with ext. 703 ThE Single Source austin@lumbermens.co INFO for all your Sawmill Needs! MAILING ADDRESS

B & B Mfg. ............................... 18 P.O. Box 1916 Corley Columbia, TNSawmill 38402-1916maChinery B. H. Payne .............................. 16 (888) 401-6367Berry Carriage DriveS Tyrone

AD SUBMISSIONS lewiS

Baker ...................................... ConTrolS opTimizaTion 5, 7

May be sent to Bell's Machining ..................... 27 morris@lumbermens.co Carriage Linear & Set Shaft

Brute Force Mfg. ..................... 31

Lewis Controls “Electronics for sawmills by sawmillers” POSTMASTER (AIM) ........ 36 Send address changes Tyrone-Berry Carriageto:Drives & Buck Parts Equipment • Headrig Slabbers Lumberman's Exchange Log Turners • Bandmills & Linebar Resaw Systems Corley Mfg .............................. 32 P.O. BoxBoard 1916 & Gang Edgers • Trimmers Columbia, TN 38402

Cambridge, Ohio www.ohioforest.org

LINK** M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

‘03 John Deere 748GIII

Corley Complete Sawmill Metal Detector's Inc. .............. 30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Item ID: 13851 Mor bark ..................................... 9 Email: Austin@lumbermensco.com Contact: Sam Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Ph: (888) 401-6367 x702

Piper's Saw Shop.................... 13

The Exchange Most Complete Line of Sawmill .............. 17 The Lumberman's is CW Mill-ArmorHog published monthly by Machinery Woods Since 1905! CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna ProductsOperation ........................ 35 Single Machine or Complete Turn-Key reserved. All editorial/ advertorial submissions are used at the More Production & Profit isEmpire Only Hydraulics One Call ................... Away 8 discretion of the publisher and may For Parts, Service & Sales be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with Lignomat ................................. 24 out written consent. www.corleymfg.com • sales@corleymfg.com ©2017 Woods Publishing

Rotochopper............................ 40

mfg

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: BANDMILLS & 14119 HEADSAWS

Danckaert Bandhydraulic Resaw -head Roughly 56” auto carriage control cab, vertical saw edger log turner, 10 hours on2 this machine since5itlog stop and load deck, 60’ long track. has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708 bells and 702-875-2703 whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CRD Metalworks .................... 25

Call (423) 698-0284 CORLEY

'11-'12 Helle Sawmill

Row Electric ............................ 20 Sawmill Exchange .................. 11 Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTINDeere 2004 John WoodMizer ................................ l Email: Austin@lumbermensco.com 648G888-401-6367 III Phone: EXT 703 Item ID: 13878

 SELL YOUR EQUIPMENTContact: TODAY ❘ Austin  24/7 SUPPORT l§ TODAY 0 SUPPORT

Ph: (888) 401-6367 x703

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

‘89 Cat D4H LGP

sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 13999 Item ID: 14000 carriage knees, husk including Contact: Austin Contact: AUSTIN 48" bottom saw and 36" top saw Ph: (888) 401-6367 x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

‘04 Hood Loader 28000 Hurdle #2 Sawmill

Item ID:Item 13971 ID: 8720 Contact: Austin 2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Ph: (888) 401-6367 x703 Morgan Slab edger, 3 strand log deck, and more.

Contact: AUSTIN Email: Austin@lumbermensco.com hours, 36” pads. It does have some www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 small leaks. Owner is going back 931-797-8029

rubber cutters because ❘ toL!  (888)tired 401-MENS NO. his 33 401-MENS job has changed. Item ID 13898. Sam x702

S A W M I L L

MARKETING DIRECTOR'02 Woodmizer LT-40 Super HD

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Woodmizer LT40 Sawmill

“Precision Under Pressure”

Phone 315.284.4126Item ID: 14227 Fax 2010 Woodmizer lt40 2250 hours 28 hp koeler v-twin gas 315.849.2045 engineWebsite extender arms simple setworks hydraulic deck all lever controlled low hours www.empirehyd.com Email Contact: MARK info@empirehyd.com

Item ID: 14191

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

S A W M I L L

Item ID: 13956

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Woodmizer Twin Blade Diesel Edger

‘93 Barko 180B

‘16 Halverson H140HudSonItem ID: Portable 14077 Sawmill H360 Contact: Austin Item ID: 8841 Skidsteer (DEMO)

Ph: (888) 401-6367 x703 2016, 1000 Hours, 35HP Motor, Hydraulic Log Dog, Item ID: JW-909632 Hydraulic Back Stop, ProCut Saw Blade 13FT 11in 7/8, TS 1 1/4 PV 121 Peavy Hook, KY area Contact: J Williams Ph: (888) 401-6367 x701Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

03’ Woodmizer LT-300 Operation Item ID: 14171

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'15 Blockbuster 18-20 Plus Firewood Processor Item ID: 14148

13428 Victory Ln. // PO Box 124 with 30ft conveyer! Only has about 150 hours. ExcelAdams Center, NY 13606 lent condition. Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

‘06 Brewco B1600 Resaw Item ID: 13862

Contact: SAM Email: Sam@lumbermensco.com ‘05 Gehl CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

1996 Jackson Shavings Mill

Item ID: 1271 chain conveyer, 8 way splitter, on

Model 30D6 Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Contact: AUSTIN 13916. Austin x703 Ph: (888) 401-6367 x703Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

with 1700 hours, in very good

MISCELLANEOUS

‘08 Timberking B20

condition. Easily produces high

quality chips with patented ‘Cone’

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter. Risley Rolly 2 head Item ID:up765 Handles logs to 32”. Uses

5yrs ago, taken off a TimbcoManual 425D (‘13). start Unused drum design. Can easily load(‘13) 42’ Bought new 13HP Honda motor. for about 1 year. It has an updated woodland computer, all cables and hook-ups come with it. Excellent conditions. Nothing needed vans and produce 6 - 8 loads per but electronic option is available. and ready to work!

day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Contact: JOE

EDGERS & GANGS

Email: Joe@lumbermensco.com adjustableEXT to709 single two way. Great Phone: 888-401-6367 OR 801-362-2170

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

MACK CH613

homemade processor Item ID: 46668 with a 10’ (‘02) (330K miles) Engine is a MACK E7-427 w/an Eaton PROCESSORS log deck. Has a hydraulic grapple, Fuller 10 speed manual transmission. Steel dump

box. All invoices be provided for work doneoff on it. 2010 Shop Built Wood Processor chaincan and kicker that all runs

- It has a 353 Detroit diesel, 40Contact: JOE of a 4 cylinder Mercedes power

inch insert tooth circle saw, 30Email: foot Joe@lumbermensco.com unit. Has EXT a 4’709 chain saw that kicks Phone: 888-401-6367 OR 801-362-2170 380  Issue 364

Lumbermens  since 1986

❘

‘95 John Deere C6 Tree Farmer

‘13 KMC 2500 Track Skidder Item ID: 14078 Meadows #2 Deluxe Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: off onto a888-401-6367 conveyor. ThisEXT is a703 very

well built processor. Item ID 13820.

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703 931-797-8029 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Frick #1 Jumbo Mill

grapple, 5,000 hours. Item ID:original 200 (excellent ID Complete operationcondition.). that includes a Item meadows

Sam x702

Firewood Processor - This is

edger, HMC V206 Debarker, 48” Chipper, Chris x700other spare parts. blower,13238. live decks, and many

a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: AUSTIN

Email: Austin@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029

low hours. Control panel includes

on injection pump. always started

good. 4 in Head good working tach, oil pressure, water temp and Quality Trimorder. Saw22in Item ID:head 1559works great. kohing head. amp gauges. Cuts logs up to 16”. Ready to run, operates from either end, Va Area Item ID 13185. Sam x702 One owner and comes with all

manuals and receipts. Purchased Contact:1999 TEDBarko 160D - new engine with Email: Teds@lumbermensco.com approximately 1500 hours. Hour new for $32,500. Item ID 13865. Phone: 888-401-6367 EXT 701 meter dont work. The last 2 owners Sam x702 or (801) 319-9351

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

642 Morbark Debarker Sam x702 Item ID: 20033 2004 Bandit Beast Model 4680 one owner great condition, completely rebuilt

6 months, like new sawdust conveyor 30’ infeed, 3412 Caterpillar Diesel new drive motors, rebuilt pumps,engine new electric motor, new belts, new bearings. Selling because just bought850 brand new5300 Cleerman with HP. hrs. debarker. Mill in Call for video!

good condition. Just finished 10 Contact: MARK Acre clearing job, ready to work! Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Remote control. Big production 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Woodmizer LT300 Item ID: 14278 BELL

Call for info!

1990 Bell Super T - This Bell has Contact: MARK aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York 1990 Freightliner www.starwebhosting.net/woodsmen/ Item ID: 1990

Desjardin Shingle Machine Item ID: 1970

The Tree PTO driven, Blade 37 1/2, runs that Started great Massachusetts Area it All! Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Precision Chipper SOUTHWEST FORESTCUMMINS PRODUCTS EXPO MILES-322,470 motor with Jake Item ID: 4524

Fri,

66 inch ReBuilt Precision Chipper good shape

www.arkloggers.com

Contact: TED Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Email: Teds@lumbermensco.com 888-401-6367 EXTEXPO 701 Phone: 888-401-6367 EXT 701 LOGGING Phone: & HEAVY EQUIPMENT or (801) 319-9351 or (801) 319-9351

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'08 Dynamic Chipper Item ID: 14196

MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives

Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR '99 Peterbilt Road Tractor John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

ID: 5461 Lexington,Item Kentucky http://www.kfia.org/ 10 HP motor on cut off blade, 5 HP KentuckyWoodExpo.aspx motor on feed chain, Good Condition. Contact: TED

THE Email: PAULTeds@lumbermensco.com BUNYAN SHOW Phone: 888-401-6367 EXT 701 Fri, 6 Oct or - Sun, 8 Oct (801) 319-9351 Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

KENTUCKY WOOD EXPO Cut -Off Saw Fri, 15 Sept Sat,Trim 16 Sept

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee SawID: ..................... 29 Item 6114

Bell's Machining ..................... 27

Metal . .............. 30 2 vibratingDetector's conveyer, it is aInc 2017 model with only

Brute Force Mfg. ..................... 31 Corley Mfg .............................. 32

Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 931-797-8029

Morbark 58” LIKE NEW

This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly Multitek 2025 Processor Item ID: 4501 since it 10 hours on this machine

2002 been model located in Ohioit has a 24foot in has rebuilt,

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.

Item 13876. Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hydMiner pac for carriage, Edger

Item ID: 14228 sawyers cab, computer controls, Miner 3 blade edger with brand new 3 phasefor motor cabinet with electronic drives brand new mandrel and Cummins 4B39 generator

carriage knees, husk including Contact: MARK 48" bottom saw and 36" top saw Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Contact: Row Electric Austin ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

4 sided planer that has removable

Hahn Machinery ...................... 3

The Paul Bunyan Show Blockbuster 1412......... Plus39 Item ID: 958 Thomas Industrial Controls..... 10

12” lumber and includes a blower (44K miles) It's got a HOOD 7000 extended boom on it,

Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

‘05 Tigercat 230B Item ID: 13911

Ph: (888) 401-6367 x703

2015 model with PLUS package and only 50 hours on it. Comes with 8 way and 6 was& splitting head. Machine Union Grove Saw Knife .. 2, 37 is in like new condition.

‘99 Hydro-Ax 511EX

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 703l 931-797-8029

ID: 13799  SELL YOUR EQUIPMENTItem TODAY ❘ 0  24/7 SUPPORT l§ TODAY SUPPORT Contact: Sam Ph: (888) 401-6367 x702

STACKING RAC

‘97 Prentice 210E

Item# 13795 Contact: Sam Ph: (888) 401-6367 x702

2006 Logosol Planer - This is a 10”

Kenworth T800

side cutters that ID: will6755 take up to Item

still with manufacture warranty. The boom has been on system. Item ID 13428. Sam x702 it for a year. Being used everyday. 2 years only of life.

POLE & POST PEELERS

Contact: JOE PS8 Post Peeler - This peeler has Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 been converted to electricity over www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 hydraulic. Comes with a operators

boxes, conveyor and ❘ cab,  electric (888) 401-MENS NO. 35 L! 401-MENS kickers and will peel a 3” post to a

7” post. Comes with a barko loader

M I S C E L L A N E O U S

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

new drum with about 6o hours inch thick heavy duty skin

MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com

Donna Heninger

9 speed Eaton fuller Air ride over 25 brake August - Sat, 26 August spring suspension 11.22.5 fair tires 15’ 10” of frame from cab back Had A.C. but doesn’t Hot Springs, Arkansas work. Originally had a water tank on it.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto a conveyor. This is a very

Kenworth T800 Log Truck & Loader

well built processor. Item ID 13820.

‘06 Cord King Model 60

Sam x702 Item ID: 6006 Firewood Processor - This 1994 model with 1998 Grizzly 215c loader.is15000 Miles

‘05 Gehl CTL 70 Contact: AUSTIN

automatice firewood processor Contact: AUSTIN

Item ID: 14068

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item"Like ID 13644. Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 380  Issue 364

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

on fresh engine overhaul. 600,000 frame miles. Work

aready Chomper Model 16 PDA setup!

Email: Austin@lumbermensco.com

with John Deere power unit with Phone: 888-401-6367 EXT 703

931-797-8029

low hours. Control panel includes

tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.

chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer. 13916. Austin x703

Best Value Portable Log

One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts. Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421. 13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark 40/36

good. in good working order. 22in Item ID: 647 kohing head. head works great.

It has a CAT engine (755hp) with a sloped live

floor and top feedwheel. Brand new clutch Item IDlarge 13185. Sam x702 installed. Ready to work!!!

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners 801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission. NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST PRODUCTS EXPO 1995 Pendu Fri, 25 August - Sat,Stacker 26 August Item ID: 1267

Item ID:Tree 14116 The

Hot Springs, Arkansas Contact: TED www.arkloggers.com

that Started Only 71,697 Miles.

Email: Teds@lumbermensco.com Phone: EXT 701 72ND888-401-6367 ANNUAL GREAT LAKES or 319-9351 LOGGING & (801) HEAVY EQUIPMENT EXPO

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 4268& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,in16good Sept Log trailer with 4 bolsters conditions.

Woods Publishing Morris WoodsTRAILER 25' LOG PUP 4 BUNKS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co

2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger 801-362-2170

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 '91 Fuel Harvester Columbia, TN 38402-1916 Tub Grinder (888) 401-6367

Item ID: 14112

AD SUBMISSIONS

3406 CatMay engine and to 4424 total be sent machine hours. morris@lumbermens.co

POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have Truck been359 madePeterbilt to ensure accuracy of Item ID: content submitted by7841 advertisers andmodel writers, the Lumberman's 1987 with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and and all new drive Exchange, its principles tires. Can be soldare with not or without log trailer associates, helda Pitts liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 703 931-797-8029 ©2017 Woods Publishing

** INFO LINK**

10 hours this machine since it Sun 4 on Bolster Log Trailer

Item ID: 8256 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

Item ID: 761 Lexington, Kentucky

(888) 401-6367 ext. 701 j@lumbermens.co Contact: JOE

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Ready toSelma, GO! North Carolina Contact: JOE www.midatlantic-logging-biomass Email: Joe@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 709 OR 801-362-2170

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed. Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!

Danckaert Band Resaw - Roughly

feetAspen a minuteBrush also hasChipper CLT presses. Item ID: 14270 Item ID 13876. Austin x703

inline 6 cylinder ford engine, 3165 hours, runs good,

to work, and wheels new, handles up to Sready &W 125tires Band Milllike with 4" diameter brush, automatic feed

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

B. H. Payne .............................. 16

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Kenworth Road Tractor Truck Bell's Machining ..................... 27

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

B & B Mfg. ............................... 18

Item ID: 14092 Brute Force Mfg. ..................... 31 Contact: AUSTIN Buck Austin@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 703 Corley Mfg .............................. 32

Morbark ..................................... 9 Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17 CW Mill-Hogzilla ................... 15

Rotochopper............................ 40 Precision lower pipe Row Electric Brand new ............................ 20

Dyna Products ........................ 35

Sawmill .................. 11 Contact:Exchange TED

Empire Hydraulics ................... 8

Select Sawmill ......................... Phone: 888-401-6367 EXT 701 19

Great Lakes MfgLog . .................... Kenworth Truck 34

Smith Sawmill ........................... 4

Precision Lower Pipe

Email: Teds@lumbermensco.com

or (801) 319-9351

Item ID: 4849 Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1990 model Boiler with 300,000 original miles. Has 444 CumHurst ............................. 14 mins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires inIron Bull ................................... 21 stalled. Can be sold with or without a Pitts log trailer.

Thomas Industrial Controls..... 10

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. Phone: 888-401-6367 EXT 70324 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

48" bottom saw and 36" top saw

2011 Dynamic Horizontal Grinder

STACKING RAC

1000 hrs, 425 hp Volvo Engine, Transfuild Clutch, Remote Control, Rev Fan, 25ft Stacking conveyor, Fix hammer Va. area Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Mack Log Truck

Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES

BANDMILLS & HEADSAWS

machine, with air strain conveyers

4 BUNK TRAILER

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Anson..................................................2................................800-663-7723 B & B Mfg..........................................23..............................800-654-5320 B. H. Payne........................................9................................404-761-8711 Baker...................................................6, 8............................800-548-6914

Bartlett Saw Service & Supply.......12........................... ‘93 Barko...800-566-0319 180B

‘16 Halverson H140 Bell's Machining...............................25......................... .....888-995-1965 Item ID: 14077 Contact: Austin Skidsteer (DEMO) Ben Jones Machinery......................3................................800-241-8983 Ph: (888) 401-6367 x703 ItemEquipment ID: JW-909632 Buck (AIM)....................35..............................800-803-3365 Contact: J Williams Built-Rite Mfg...................................27..............................800-757-2520 Ph: (888) 401-6367 x701 Corley Mfg.........................................33..............................423-698-0284 CRD Metalworks..............................39..............................888-667-8580 CW Mill, DynaHog...........................40..............................800-743-3491 CW Mill, ArmorHog.........................40..............................800-743-3491 F&R Manufacturing.........................21.............................. 800-355-1250

‘95 John Deere C6 Great Lakes Mfg...............................9................................877-248-5677

Tree Farmer Hurst Boiler.......................................15........................... ...877-774-8778 Item ID: 13920 Kilgore Saw........................................13..............................888-857-5153 Contact: Austin ‘13Korners.....................................11........................... KMC 2500 Track Klug ...800-471-5060 Ph: (888) 401-6367 x703 Skidder Lignomat............................................11..............................800-227-2105 Item ID: 14078 Menominee Saw...............................11..............................800-582-0470 Contact: Austin capacity!. Item ID...231-924-5953 13421. Sam x702 Midwest Sharpening ......................17........................... Ph: (888) 401-6367 x703 BARKO Multitek..............................................14........................... ...800-243-5438

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8

1994 Barko 160B - Electric

Northeast Implement, Inc. ............13..............................607-589-6160

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Pantron Automation, Inc. ..............38..............................800-211-9468

well built processor. Item ID 13820.

motor, Rotobec continuous

Piper’s Saw Shop..............................10.............................. 800-845-6075

Sam x702

grapple, 5,000 original hours.

Row Electric......................................17........................... ...800-248-4479 (excellent condition.). Item ID Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot 380  Issue 364

TraxPlus .............................................4 ...............................601-635-5543 1995 Barko 775 B Feller Buncher automatice firewood processor

- Pumps recently redone. 400 hrs with John Deere power unit with Trelan..................................................1................................989-561-2280 on injection pump. always started low hours. Control panel includes Woodlandia.......................................7................................877-508-8777 tach, oil pressure, water temp and PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

DECEMBER 2018

kohing head. head works great.

If you need to Change your Address or

Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts. Purchased please complete this form and mail to: with new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt. 1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter. 13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value! Item ID 12062. Sam x702 in excellent condition. Runs great.

Sawmill................................ ...31........................... 13238. Chris x700...613-673-1267 aSelect Chomper Model 16 PDA

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change. Boomto cylinders minor leaks. Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better. 475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Address:_ ________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

x702

BELL

State:___________________________________________________________________

Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

Phone:__________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!

control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN