Lumbermens November 2019 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca

‘95 John Deere C6 Tree Farmer

Item ID: 13920 TOLL FREE 1-888-219-WOOD Contact: Austin ‘13 KMC 2500 Track (9663)

Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70Wedge and automatice firewood processor • splitter

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Item ID: JW-986495 John Deere power unit with design towith suit your Contact: J Williams low hours. Control panel includes needs Ph: (888) 401-6367 x701

tach, oil pressure, water temp and 24 to 72 ton splitting amp gauges. Cuts logs up to 16”. capability chain conveyer, 8 way Onesplitting owner and comes with all • splitter, The on fastest 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 planet. new for $32,500. Item ID 13865.

•

Best Value Portable Log Splitter

Sam x702

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

LOGGING EQUIPMENT BANDIT

quality chips with patented ‘Cone’ Handles logs first up to 32”. Uses 1999 Bandit 1900 Tracked Disc 1. Pioneered N. America’s commercial firewood processor drum design. Can easily load 42’

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

3 Bar models M1820, vans and2. produce 6 - 8saw loads per but available electronic option is available.M2030 50% orand better.M2430 475 hp Cummins

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. in the mid 70’s Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Model 40, 44, 44HO, 48, 54 with & 60 low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable Available to single two way. Great 36, Well maintained. Item ID 13294.

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed

in excellent condition. Runs great.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

x702 3412 Caterpillar engine homemade processor with a video 10’ web site for live action and detailsDiesel www.cordking.ca FIREWOOD PROCESSORS BELL with 850 HP. 5300 hrs. Mill in log deck. Has a hydraulic grapple, 6. Available with single joystick control 2010 Shop Built Wood Processor 1990 Bell Super T - This Bell has chain and kicker that all runs off good condition. Just finished 10 Item ID 13644. Samto x702 5. Go our

- It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. inch insert tooth circle saw, 30 foot control, 33” bar, pump and tranny control. Big production unit. Has a 4’ chain saw that kicks  Issue 364 388

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 3

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Commercial, dual action

“Precision Under Pressure”

‘93 Barko 180B

LOG SPLITTER

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in tach, oil pressure, water temp and ‘83 John Deere kohingFeatures head. head works great. amp gauges. Cuts logs up to 16”. The FS500 is a dual action 42-ton commercial log splitter that is ideal for commercial wood FS500 4850

Item ID 13185. x702 8 way splitter, on One owner and HondaSam 630cc gas splitting operations without thechain high conveyer, cost investment of a firewood processor. The comes FS500with all • Powerful Item ID: 14073 1999 Barko 160D new engine with 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased engine Contact: Austin gives you maximum efficiency and productivity for your business and built in the USA. approximately 13916. Austin x703 new for $32,500. Item ID 13865. Ph: (888) 401-6367 x703 • 42 tons of force1500 splitshours. Hour The FS500 starts at $14,395*. meter dontand work. The lastlogs 2 owners Best Value Portable Log Splitter Sam x702 hardwood softwood have onlylong used it to load trucks or with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT up to 24" • Bi-directional action as a backup asdual needed. Has a CTR condition. Easily produces high made the best valued log splitter. BANDIT splitting wedge delimber, grapple has been rebuilt. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc drum design. Can easily load 42’

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

50% or better. 475 hp Cummins

Well maintained. Item ID 13294. Sam x702

Go online and watch video to see the Processor different models thatBandit are available or ask in excellent condition. Runs the great. Firewood - This isand a options 2004 Beast Model 4680 today forSam yourx702 free catalog! Item ID 13644.

homemade processor with a 10’

3412 Caterpillar Diesel engine

2010 Shop Built Wood Processor

chain and kicker that all runs off

good condition. Just finished 10

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

2019 Wood-Mizer LLC *Prices are in US dollars. Prices and specifications are subject to change without notice.

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 388

of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

with 850 HP. 5300 hrs. Mill in

Acre clearing job, ready to work! Remote control. Big production

 List  seLL  exchange  buy  save

• Intuitive left/righthave controls Boom cylinders minor leaks. engage steel splitting wedge Item ID 13694. Sam x702 and up/down controls engage 94 Barko 275 - Excellent value log lift with low at hours at 3,500. 5.9 • Easy hook-upcontinuous and towable with CUMMINS grapple. 2" hitch trailer

Runs Great!. Item ID 13740. Sam

• Ergonomic log table height x702

BELL

1990 Bell Super T - This Bell has woodmizer.com a800.553.0182 brand new Duetz engine. Lever

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

heavy duty log turner under log

loading system,. Item ID 12764.

logs onto carriage and track and

State

frame. Significant new spare parts

to be negotiated separately. Item ID

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

DEPARTMENTS The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

all steel carriage. Husk. Manual

clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

'12 WoodmIzer LT 40 SOUTHWEST

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

EquipmEnt REpREsEntativEs

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

Free Listings................................6 Company Name*

❑ Please add

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings! Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

Escanaba, BUY SMichigan AVE

Phone

Address

Individual Name

Deals of the Month..................18 EST 1986 MID-ATLANTIC LOGGING & BIOMASS LIST

SELL

EXCHANGE

Morris Woods

item id: 14061 contact: Austin x703

2012 JoHn deere 548G3 Fri,

AD Sales

401-6367 15 Sept - Sat,(888) 16 Sept

Selma, North CarolinaExt. 704 Ad Directory..............................38 www.midatlantic-logging-biomass PUBLISHER

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

expo.com/

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Mark Laxton Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 708

FAbTeK 344b

THE PAULmark@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet Donna Heninger manufacturing, and secondary wood manufacturing industry, is free within the United States item id: 14061 to qualifying manufacturers and industry suppliers. Please limit your subscription tox701 one free contact: J Williams EQUIPMENT REPS copy per company or mill location.

✁

Sam Wall For classifieds CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, P.O. Box 1916, (888) 401-6367 ext. 702 Columbia, TN 38402. When possible, please include an old address label. Call toDay sam@lumbermens.co

(888) 401-6367 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Austin Woods Lumbermens™ accepts no responsibility for their claims. No  Issue lumbermenS  Since 1986 in ❘ any form  liSt  Sell part of this364 publication may be 703 reproduced or transmitted or by any means,  (888) 401-6367 ext. electronic or mechanical, including photocopying, recording or any information storage austin@lumbermens.co retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ MAILING ADDRESS owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use B & B Mfg. ............................... 18 P.O. Box 1916 outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, Columbia, TN 38402-1916 and printing material contained within. We shall not be liable for omissions or typographical B. H. Payne .............................. 16 errors. (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

(888) 401-6367

exchange  buY  Save

Chris Woods

that go up and down, with airbags, it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Reduced PRice item id: 14021 contact: Sam x702

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

morris@lumbermensco.com

MID-ATLANTIC

LOGGING & BIOMASS EXPO

machine, with air strain conveyers

❘

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876. Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext. 702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

The Tree Brute Force Mfg. ..................... 31 that Buck Equipment (AIM) ........ 36 Started 32 Corley Mfg .............................. CRD Metalworks .................... it All! 25

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

Since 1986, Lumbermens™ CW Mill-ArmorHog ..............has 17 published a monthly circular reaching sawmills, loggers, pallet makers, CW Mill-Hogzilla ................... 15 recyclers and industrial woodworking plants Dynaworldwide. Products ........................ 35

Rotochopper............................ 40

Empire Woods Hydraulics ................... 8 Publishing

Select Sawmill ......................... 19

DESIGN DIRECTOR Great Lakes Mfg . .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 MAILING ADDRESS

The Paul Bunyan Show ......... 39

PUBLISHER

Ted Monnin

P.O. Box 1916 • Columbia, TN 38402 (888) 401-6367 Hurst Boiler ............................. 14 AD SUBMISSIONS Iron BullMay ................................... 21 be sent to— morris@lumbermensco.com

Kilgore Saw ............................. 22 POSTMASTER

Send address changes to: 24 Lignomat .................................

Lumbermens™ Magazine P.O. Box 1916 • Columbia, TN 38402

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Ted Schultz

(888) 401-6367 Ext. 701

Morbark ..................................... 9

teds@lumbermensco.com

Multitek ................................... 12

Piper's Saw Shop.................... 13

Will

Row Electric ............................ 20

Keene

Sawmill Exchange .................. 11

(661) 900-7726

Will@lumbermensco.com

Call US Today for ALL your Universal Refiner ................... 23 Equipment Needs! WoodMizer ................................ l Thomas Industrial Controls..... 10

Union Grove Saw & Knife.. 2, 37

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

sawyers cab, computer controls, Sam Wall

(888) 401-6367 Ext. 702

48" bottom saw and 36" top saw sam@lumbermensco.com

STACKING RAC

Fernanda

McDermott

(801) 699-8784

fery@lumbermensco.com

Wes Graber (888) 401-6367 Ext. 710

www.BakerProducts.net

Wes@lumbermensco.com 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

condition, Cuts 130 feet a minute CARRIAGES & DRIVES also has CLT presses. 2010 CARDINAL HD Item ID 13876. Austin x703 CARRIAGE CARRIAGES

DANCKAERT BAND RESAW Roughly 10 hours on this CARRIAGES & DRIVES machine since it has been Cardinal Carriage line it includes 2010 rebuilt, it has a 24 foot in feed carriage withCARDINAL onboard logHD turners, CARRIAGE deck 20 foot out feed deck with carriage drive, CARRIAGES hyd pac for Cardinal Carriage includes 44 inch wheels, and all the bells carriage, sawyers line cab, itcomputer carriage with onboard log and whistles, its aa production production controls, cabinet with electronic turners, carriage drive, hyd machine, machine, withwith air strain airconveyers strain drives for carriage knees, husk pac for carriage, sawyers conveyers that go up thatand go updown, and down, with including 48” bottom saw andcab, 36” computer controls, cabinet with with airbags, airbags, it includes it includes two setstwo of top saw, short pop-up transfer electronic drives for carriage sets Mcdonough of Mcdonough pressure guides. pressure Top to edger, belted rollcase to clear knees, husk including guides. Casting Top wheelCasting is supported wheel on is slabs and cuts from sawline, 48” log bottom and 36” logs top onto saw, supported both sides. on This both is an sides. extremely This is stop and saw loader to drop short pop-up to edger, an accurate extremely machine accurate in very machine good carriage, heavytransfer duty log turner in very good condition, Cuts under log stop and loader to deal Victory Ln. POCLT Box 124 130 13428 feet a minute also//has with big logs onto carriage and Adams Center, NY 13606 presses. track and frame. Item ID 13876. Austin x703 Item ID 13198. Sam x702

Item ID: JW-909632 belted rollcase to clear slabs CHIPPERS Contact: J Williams andPRECISION cuts from sawline, log stop 58 CHIP PAC Ph: (888) 401-6367 x701 and loader to drop logs onto Single chute loading system. carriage, duty logx702 turner Item IDheavy 12764. Sam under log stop and loader to COMPLETE SAWMILLS deal with big logs onto carriage 2006 WOODMIZER and track and frame. LT300 ThisItem mill ID is currently running, 13198. Sam x702and includes the sawmill, and cab. CHIPPERS An incline conveyers, a transfer PRECISION CHIPofPAC table and two58sets roller Single chute loading system. tables. This mill saws a million Itemfeet ID 12764. Sam board or more ofx702 walnut COMPLETE SAWMILLS every year. Max log Track diameter ‘13 KMC 2500 2006 WOODMIZER LT300 36in, Max Width of cut 25in, Skidder This mill isofcurrently The width the band running, is 1 1/2 Item ID: 14078 Inches. Video of it operating is Contact:and Austin available, can be sent upon Ph: (888) 401-6367 x703 request. Item ID 13892. Austin x703

If you recognize this…

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

a Chomper Model 16 PDA

(excellent condition.). Item ID DYNAMIC CHIPPERS 13238. Chris x700 2004 JCB 441 WHEEL LOADER

with John Deere power unit with

works redone. as it should. I have -everything Pumps recently 400 hrs

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: JW-986495 Albach North America specializes in the production Contact: J Williams of selfpropelled chippers and fellcranes. The(888) Albach Diamant 2000 Ph: 401-6367 x701

‘83chipper Johnand Deere the Albach Fellcrane Tree Handler 1.0 stand above all other heavy equipment in class to provide forest 4850 services that meet the toughest requirements in the most de-

chain conveyer, 8 way splitter, on Item ID: 14073 manding environments. 20,000lb goose neck trailer. Item ID Contact: Austin its class, the Albach 2000 is the most power13916. Austin x703 Ph:In(888) 401-6367 x703 Diamant

ful and flexible wood chipper available. The Albach Diamant Best Value Portable Log Splitter 2000 offers the highest possible through-put and the chip withquality 1700 hours, in very good Small manufacturer in PA has necessary to meet the most demanding specifications. The Albach to produce that condition. Easily chipper producesmakes high it easy made the best wood valuedchips log splitter. meet all with requirements and specifications. quality chips patented ‘Cone’ Handles logs up to 32”. Uses

you need one of these.

drumThe design. Can Fellcrane easily load is 42’a field-proven 13HP Honda Manual Albach treemotor. handler with start a reliable 3 piece telescopic boom. This heavy duty equipment vans and produce 6 - 8 loads per but electronic option is available. ideal useAustin with the Albach Diamant chipper in tough day. is Item IDfor 13882. x703 Has Log2000 Lift. Uses 4-way wedge forest environments. EDGERS & GANGS adjustable to single two way. Great

automatice firewood processor

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

1500 Model

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Don’t just fix it again, get the permanent solution!

Brewco Saws - Two Brewco Saws information Value! PA.on Item ID 12062. Sam x702 For more in excellent condition. Runs great. Firewood Processor - This is a Albach North America Item ID 13644. Sam x702

homemade processor with a 10’ (978) 939-9111 FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, sales@albach.us

2010 Shop Built Wood Processor

chain and kicker that all runs off

www.prolenc.com

www.albach.us - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power

250.563.8899 inch insertCall tooth877.563.8899 circle saw, 30 foot or unit. Has a 4’ chain saw that kicks  Issue 364 388 384

Lumbermens™  since 1986

❘

Ph: (888) 401-6367 x703 and includes sawmill, and DRYthe KILNS cab. An MEC incline conveyers, a 12 X 38 transfer table and two sets TRIPLE PASS DRUM DRYER of rollerwith tables. This mill drum saws Comes trunnions, a million board feet or more drive, fan and cyclone. ofItem walnut every year. log ID 13925. AustinMax x703 diameter 36in, Max Width of cut 25in, MECThe 12 Xwidth 42 of the band is 1 1/2 Inches. TRIPLE PASS DRUM Video DRYERof ‘95 John Deere C6and it operating is available, 12 x 42 Mec triple pass Drum can be sent upon request. Tree Farmer Dryer, comes with trunnions. Item ID 13892. Austin Austin x703 x703 Item ID Item ID:13924. 13920 DRY KILNS DYNAMIC CHIPPERS Contact: Austin MEC 12 X 38x703 Ph: (888) 401-6367 2004 JCB 441 WHEEL LOADER TRIPLE PASS DRUM 3,509 hours on this DRYER machine, Comes with everything workstrunnions, as it should. Idrum have drive,videos fan and cyclone. many available of it running, capacity!. Item ID 13421. Sam x702 Item Austin x703 and can ID be 13925. sent upon request. BARKO Item ID 13888. Austin x703 X 42 1994 BarkoMEC 160B 12 - Electric TRIPLE PASS DRUM DRYER knuckleboom, 30' boom, 75hp 12 x 42 Mec triple pass Drum motor, Rotobec continuous Dryer, comes with trunnions. grapple, 5,000 original hours. Item ID 13924. Austin x703

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

3,509Barko hours thisBuncher machine, 1995 775 BonFeller

many videos available of it running, and can be sent upon request. good. in good working order. 22in Item ID 13888. Austin x703 on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

‘0

Boom cylinders have minor leaks.

Ite Co Ph

delimber, grapple has been rebuilt. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

‘9 51

Ite Co Ph

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

used

or a

wer

ill

2008 DYNAMIC 585 CHIPPER Phone FIREWOOD PROCESSOR This is a 2008 dynamic cone This is a homemade processor 315.284.4126 head chipper with 1700 hours, Faxwith a 10’ log deck. Has a 315.849.2045 in very good condition. EasilyWebsite hydraulic grapple, chain and produces high quality chipswww.empirehyd.com with kicker that all runs off of a 4 Email patented drum design. cylinder Mercedes power unit. “Precision‘Cone’ Under Pressure” info@empirehyd.com Can easily load 42’ vans and Has a 4’ chain saw that kicks off produce 6 - 8 loads per day. onto a conveyor. This is a very Item ID 13882. Austin x703 well built processor. FIREWOOD PROCESSORS Item ID 13820. Sam x702 2010 SHOP BUILT FIREWOOD PROCESSOR WOOD PROCESSOR This is a Chomper Model 16 PDA It has a 353 Detroit diesel, 40 inch automatice firewood processor insert tooth circle saw, 30 foot with John Deere power unit with chain conveyer, 8 way splitter, on low hours. Control panel includes 20,000lb goose neck trailer. tach, oil pressure, water temp and Item ID 13916. Austin x703 amp gauges. Cuts logs up to 16”. One owner and comes with all

PIPER’S Saw Shop

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702 LOGGING EQUIPMENT BANDIT

2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finishedH140 10 Acre ‘16 Halverson clearing job, ready to work! Remote Skidsteer (DEMO) control. Big production capacity! Item ItemID: IDJW-909632 13421. Sam x702 Contact: J BARKO Williams Ph: (888) 401-6367 x701 1994 BARKO 160B Electric knuckleboom, 30’ boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition). Item ID 13238. Chris x700

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams

‘83 John Deere $14.27 4850 $14.71

Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

BELL TREE CUTTER Around 1000 hours on the machine. New air cooled motor only about 300 hours. Rebuilt dangling head. Several bars and chains. Machine ‘95 John Deere C6 came off the job in February and is Tree field ready.Farmer Item ID:13943. 13920Austin x703 Item ID Contact: Austin CASE Ph: (888) 401-6367 2006 CASE 440 SKID x703 LOADER

With only 871 hours, this machine starts, runs, and capacity!. 13421. Sam many x702 operates Item like ID new. I have videos available and can be sent BARKO upon request. 1994 Barko 160B - Electric Item ID 13886. Austin x703 knuckleboom, 30' boom, 75hp

motor, Rotobec continuous 99’ CASE 850G LONG TRACK DOZER

Firewood Processor - This is automatice firewood processor

1995 Barko 775 B Feller Buncher

a Chomper Model 16 PDA

been used the woods, it has 13238. Chris in x700

tach, oil pressure, water temp and

a ripper on the back, original pads, and chains, Under carriage -isPumps recently redone. 400 hrson new along with new rollers on always started theinjection bottom,pump. and new sprockets. Item ID 13909. Austin x703 good. in good working order. 22in

One owner and comes with all

CATERPILLAR Item1994 ID 13185. Sam x702 320

with John Deere power unit with

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

CATERPILLAR kohing head. head works great.

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Dry machine that is in good condition for the year. The stick and approximately Hour bucket cylinder 1500 have hours. been repacked. meter work.and The bucket last 2 owners It has dont a thumb on it, also has 230 Waratah have onlya used it to load processing trucks or head that as canneeded. be sold as a backup Haswith a CTRit. Hours are around 19k, motor has delimber, grapple has been rebuilt. been replaced a couple years back. Boom cylinders havedaily. minor leaks. Machine is working Item ID ID 13694. Sam Austin x702 x703 Item 13936.

Well maintained. Item ID 13294.

1994 with low CATERPILLAR at hours at 3,500.D4 5.9 HI

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter. 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

 Issue 364 1986 388 Lumbermens List exchange itbuy  to save arch with winch. Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

Contact: Austin 1993401-6367 BELL SUPER T Ph: (888) x703 Good running condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken. Item ID 13543. Sam x702

grapple, 5,000 original hours. only One owner machine, 3300 original hours, hasIDnever (excellent condition.). Item

Sam x702

Promotional Pricing Offer

BELL

1990 BELL SUPER T This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny has been rebuilt not long ago. Hour meter is inop. New paint. Runs perfect. Has heat and air, it just to be fixed. ‘93needs Barko 180B Item ID 13896. Item ID: 14077 Sam x702

22X380, direct drive, EROPS,

job site and put it to work to up

1999 Barko 160D - new engine with

94 Barko 275 - Excellent value

TRACK WITH GRAPPLE This is an extremely low hour dozer/ Runs Great!. ID 13740. skidder withItem only 2800 Sam actual x702 hours. Comes with new 30” pads and chain. Undercarriage is still in BELL excellent shape. Fixed grapple 1990 Bell Super T - This Bell hasand no winch. a brand new Duetz engine. Lever Item ID 13932. Sam x702 CUMMINS continuous grapple.

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

L I V E P**U CALENDAR** BLIC AUCT ION NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

MAR-DUSTRIAL SALES INC Boonville, New York www.starwebhosting.net/woodsmen/

BANDMILLS & HEADSAWS EXPO 9 : 0 0 A M | T hSOUTHWEST uFri,r25sAugust dFOREST a- Sat, yPRODUCTS N o v e mber 14 26 August

Danckaert Band Resaw - Roughly

The Tree that Started it All!

10 hours on this machine since it L o cat i on : 4 8 6 5 N L ag o on Av e . , Por tl and , OR 9 7 2 1 7 has been rebuilt, it has a 24foot in

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Preview:

MID-ATLANTIC

LOGGING & BIOMASS EXPO

November, 13

GIDDINGS & LEWIS 340-T

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co Donna Heninger

Sam Wall (888) 401-6367 ext. 702 2006 INTERNATIONAL 4300 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

is an extremely accurate machine in ve1y good condition, Cuts 130

SPX POWER TEAM

feet a minute also has CLT presses.

SI Z E 1 6

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

is supported on both sides. This

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept A X E LSON

MARKETING DIRECTOR

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

with 44 inch wheels, and all the

A R C H DA L E DENNISON HYDROILIC MC08 MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept

8amPUBLISHER - 4pm

Wednesday, ADVERTISING SALES

feed deck 20 foot out feed deck

CLARK C500-Y130

2006 HUAYING XCLL2-290

Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam (2)MILWAUKEE x702 H

CARRIAGES & DRIVES

Machine Shop/ Gear Reducer Inventory/ Rolling Stock INFO LINK** Carriages (Sawmill) - Cardinal Carriage line it includes carriage Bid live18orM&Fonline @ murphyauction.com B & B Mfg. ............................... Gauge ............................. 28 with onboard log turners, carriage 2010 Cardinal HD Carriage

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

*LARGE OF FALK PARALLEL, Buck Equipment (AIM) ........ 36 SendQUANTITY address changes to: CONCENTRIC, SHAFTExchange MOUNT, MIXER/WORM Lumberman's GEAR & BEVEL P.O. HELICAL Box 1916GEAR REDUCERSCorley Mfg .............................. 32

Morbark ..................................... 9

AD SUBMISSIONS

May be sent to morris@lumbermens.co

MOTOR & DRIVE INVENTORY: POSTMASTER

Columbia, TN 38402 CRD Metalworks .................... 25 *LARGE QUANTITY OF SEW EURODRIVE, The Lumberman's Exchange is LIGHTNIN, CW Mill-ArmorHog .............. 17 HANSEN, WESTERN, LINKBELT, published monthly by Woods FOOTE JONES, WESTINGHOUSE, CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, PHILADELPHIA, FLENDER, BOSTON, Columbia, TN 38402. All rights WINSMITH, RADICON, BROWNING, Dyna Products ........................ 35 reserved. All DB editorial/ advertorial ELECTRAGEAR HUB submissions are & used atCITY the GEAR REDUCERS Empire Hydraulics ................... 8 discretion of the publisher and may be editedQUANTITY for purposes claritySETS, *LARGE OFofGEAR Great Lakes Mfg. .................... 34 and space. Although all efforts haveCARRIERS, HOUSINGS, BEARINGS, BEARING Hahn Machinery ...................... 3 been made to ensure BASES accuracy of COUPLERS, MOTOR & BRACKETS, content submitted by advertisers HIGH SPEED HEADS, MOTOR & SHAFT Hurst Boiler ............................. 14 and writers, the Lumberman's COVERS FANS, FLANGES, Exchange,&its principles and SPACERS, GASKET Iron Bull ................................... 21 MATERIALS & LARGE QUANTITY associates, are not held liable for OF VALVES TO 8” or omissions. Reproduction, errors Kilgore Saw ............................. 22 in whole or part, is prohibited with Lignomat ................................. 24 out written consent. ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

drive, hyd pac for carriage, 425-486 - 1cab,2computer 4 6 controls, sawyers

Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

48" bottom saw and 36" top saw

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

2017 Edminston 3 Saw Edger “Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1996 CAT 214 MOBILE EXCAVATOR with 36’ magnet 3 tons steel shear. low hrs! All hard tires, 4 outriggers ideal for scrap business. It also has 48’ swavel bucket for street ditch clean up. Item ID 13441. Sam x702

‘16 Halverson H140 1998 CATERPILLAR 515 Skidsteer (DEMO)

Grapple winch, no heat or Item ID:with JW-909632 air. Open cab skidder Contact: J Williams with 9800 hours. Tires401-6367 are 28L’s,x701 rear 90% Ph: (888) and fronts are 30% with new bear paws chains. Item ID 13801. Sam x702

2 Moveable w/3 Laser Lights 30 Hp Motor. Extra Saws. Great Condition.

LSO A2017 LT 70 Super Woodmizer 3750 hrs.Ln.Great 13428 Victory // PO Condition. Box 124 Adams Center, NY 13606

Priced to Sell.

CALL 717.363.6304

2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine. Continuous grapple, tires are 30.5’s @ 70%. This ‘13 KMC 2500 Track is a really nice skidder for the Skidder price. ItemID: ID14078 13816. Sam x702 Item Contact: Austin 2007 CATERPILLAR D6N Ph: (888) 401-6367 x703 LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 388

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

ItemOwner ID: 14077 One Runs great! Is it Contact: Austin an excellent condition. Rubber (888) 401-6367 x703 new isPh:around 75% Has Hydraulic pump and Charge pump. Item ID 13616. Sam x702 CLARK

CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and Deere winch, always ‘95 John C6 fires right up, and runs with Tree no issues.Farmer Item ItemID ID:13748. 13920Austin x703 Contact: Austin EARLY CLARK 664 Ph: (888)70’S 401-6367 x703 CABLE SKIDDER some center slack, needs front tires, comes with a spare tire. capacity!. Item ID 13421. Sam x702 Gearmatic 19 winch doesn’t BARKO hold good. 453 Detroit power 1994 Barko 160B - Electric unit. knuckleboom, 30' boom, Item ID 13629. Sam75hp x702 motor, Rotobec continuous

BEST LESS

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

2000 CAT 515 GRAPPLE ‘93 Barko 180B SKIDDER

grapple, 5,000 original hours.

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150 S/N: ALY03028. Item ID 13567. Chris x700

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners KIT SPECIAL have only used it to load trucks or

LOGGING EQUIPMENT BANDIT

as a backup2” as needed. Has a CTR Includes delimber, grapple Pins, Nuts & has been rebuilt. Boom cylinders have minor leaks. Chipper - Cat Under Carriage at Locks

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Well maintained. Item ID 13294.

with low at hours at 3,500. 5.9

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

Contact your power of a 4 cylinder Mercedes

Diesel. 7500 Hours. One owner. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

94 Barko 275 - Excellent value

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

www.prolenc.com 1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever Acre clearing job, ready to work! Call 877.563.8899 or 250.563.8899 control, 33” bar, pump and tranny Remote control. Big production unit. Has a 4’ chain saw that kicks

local dealer or

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR** Shrink Wrap

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS FireWOOD/WaSteWOOD Fri, 18 August - Sun, 20 August Location of all equipment at 30+ Years Boonville, New York www.LumberMB\ISmagazine.com Strong! www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

From Price To Performance, 72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO We’re A Cord Thurs, 7 Sept - Sat, 9 Sept Above The Rest! Escanaba, Michigan

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

with 44 inch wheels, and all the Sell Your WOOD – $300/cord or More!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants8 Models  Firewood Processors: worldwide.

bells and whistles, its a production

Double or triple your profits by shrink wrapping - foremachine, withwastewood air strain conveyers that go up size and packages down, with wood with WOOD-PAKer! Attractive various canairbags, be  Firewood Cleaners MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough with our high production, easily operated and affordable  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs Fri, 15obtained Sept - Sat, 16 Sept PUBLISHER Topfor Casting wheel Selma, NorthEight Carolina machines. machines available. pressure The idealguides. equipment produc Firewood Woods Publishing& Log Grapples  Free DVD www.midatlantic-logging-biomass is supported on both sides. This MID-ATLANTIC ingexpo.com/ square bundles-palletizable for ease in storage and transporting. ADVERTISING SALES is an extremely accurate machine Morris Woods Inquire for free details. Video and Package samples at nominal fee. in ve1y good condition, Cuts 130

‘97 T 360C

Item I Conta Ph: (8

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

Williams PJohn ortable • DePenDable (888) 401-6367 ext. 701 j@lumbermens.co

KENTUCKY WOOD EXPO a minute also has CLT presses. Fri, 15 Sept Sat, 16 Sept • 3007 Westfeet B & B-Manufacturing River Road • Olean, NY 14760

• low Maintenance

888-SPLITTER (888-775-4883) 319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA DESIGN DIRECTOR

blockbuster-inc.com

Donna Heninger

100

EQUIPMENT REPS

Sam Wall WWW.TREETRADER.COM (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Toll Free 1-800-654-5320

S & W 125 Band Mill with

Item I Conta Ph: (88

Caterpillar generator - Low hours

the www.bbmfg.org mill, electronic computer Set Has a 20 E-mail:SHOW bbmfg@verizon.net •onWeb: THE PAUL BUNYAN works,1 1/2" or 2" band, 22ft. track mounted Fri, 6 Oct - Sun, 8 Oct

Cat 3406 140KW Genset, 12,400 Cambridge, Ohio www.ohioforest.org ~ The World’s Largest Website For The Tree & Landscape hours ready Industry to run. Item ID 13434.

** INFO LINK**

B & B Mfg. ............................... 18 B. H. Payne .............................. 16 Baker ...................................... 5, 7 Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

CW Mill-ArmorHog .............. 17

Corley Mfg .............................. 32 CRD Metalworks .................... 25 CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35 Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID 13876. Austin x703

John

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

Carriage line‘02 it includes Corley Complete Prenticecarriage 490 with onboardItem logID: turners, carriage 14047 Sawmill Meadows Mill, Inc. ................ 33 M&F Gauge ............................. 28

CAT D4H TSK for carriage, Contact: Austin Item ID: 14035 drive, hyd pac Item ID: 13558 Saw ..................... 29 Menominee Ph: (888) 401-6367 x703 sawyers cab, computer controls, Contact: Austin Contact: Sam

Comes w

ID 13864

2015 Joh

still a ne

hours. O

compan

Dual arc

turn aro

HD axle

and still

cabinet Ph: (888) x703 with electronic drives for Metal Detector's Inc. .............. 30 401-6367 an exten Ph: (888) 401-6367 x702 carriage knees, husk to including Components 2017 or 3000 hours. bought f Midwest Sharpening.............. 26 48" bottom saw saw Totallyand loaded36" withtop extras. Has lot of mo Morbark ..................................... 9 Only 4200 hours. Factory warranty manually. Great buy on this Deere. counterweight/running boards. skidder Multitek ................................... 12 until 5000 hours. Great running Tinted windows to help keep the Includes the JD 22” Hot Saw with Item ID Piper's Saw condition. 35.5 tiresShop at 60%..................... Tight sun and13 heat out. Item ID 13856. 40 degree tilt. 36” wide flotation 2015 Joh Rotochopper 40 and Dry. Great value............................. Item ID Sam x702

STACKING RAC pads. Simply perfect condition.

skidder

13574. Sam x702

of tire ch

13482. Sam x702 ............................ 2013 John Row Electric 20Deere 437D - This loader New price is $445,000. Save $40,000 only 100 2012 John Deere 548GIII - Single is still like for only 380 hours of use!. Item ID on 30.5 X Sawmill Exchange .................. 11brand new. It has been arch with winch, blade extensions, well taken care of with only 2932 Select Sawmill ......................... 19 1 new 28L and 3 @ 50%. This is hours. CSI delimber, Kodiak, Series Smith Sawmill ........................... 4 still a new machine with only 3600 3 hydraulic landing gear. You will The Show ......... hours.Paul Item IDBunyan 13780. Sam x702 not find39 another loader this clean.

Thomas ..... 2012/13 JohnIndustrial Deere 200D Controls Item ID10 13822. Sam x702

2014 John Deere 160G Excavator -

joystick

Low hour excavator with only 1500 wide bla

hours. Still a new machine. Item ID on this o 13841. Sam x702

ExcavatorGrove - This is still a like&new 753J Feller Buncher - NEW! 2014 John Deere 643K - There’s Union Saw Knife2014 .. 2,JD 37 excavator with only 3000 hours. - Treat as NEW! Only 381 hours. not much to say about this feller Universal Refiner ................... 23 Comes with a stationary rockland Standard warranty expired, but buncher. It’s still brand new out www.BakerProducts.net WoodMizer ................................ l thumb that can be adjusted has Extended Warranty 800.S48.6914 on Major of theI box with only 1452 hours. S73.663.7711

 SELL YOUR EQUIPMENTTODAY TODAY ❘ 0  24/7 SUPPORT  (888) 401-MENS l§ SUPPORT Issue 364 Lumbermens  since 1986 ❘ ❘ ListL! seLL  401-MENS exchange  buy NO. save 11❘

because

13935. Sa

84/85 Jo skidder

Power C

 Lumb

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value “Precision Under Pressure”

Woodmaster See why we are your BeSt Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

thIn Kerf Band saw Blades Ask About Our Dismanteling Blades 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 ck Cheut Our O

1-888-857-5153 Quality • Our Service • Our Price

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology

Quality Brand Reg. U.S. Pat Off

‘93 Barko 180B Call 800 752-0627

Circular Saws ‘16 Halverson H140 Item ID: 14077 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Contact: Austin Skidsteer Circular Knives (DEMO) We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth 84/85 John Deere

Ph: (888) 401-6367 x703 Carbide Tipped Saws Item ID: JW-909632 Saws & Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff 440B/C Contact: J Williams B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Item 13908 Saw Manufacturers Ph: (888) 401-6367Knife x701 Grinding Wheels, Saw ID: Gumming Wheels & Knives. Contact: Sam Here’s What You Get With Every B.H. Payne Saw Ph: (888) 401-6367 x702 Wood-Mizer LT40 • Saws manufactured from only the Highest Quality Nickel Alloy Steel. Item ID: 13995 • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. Contact: Austin • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. Ph: (888) 401-6367 x703 • Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.

P.O. Box 90608 EastKMC Point, GA2500 30364 ‘13 404 761-8711 Skidder Fax 404 761-5398

Track

Item ID: 14078 Contact: Austin “Since 1890” Ph: (888) 401-6367 x703

E-mail: info@paynesaws.com off onto a conveyor. This is a very

‘89 Timberjack 380A

well built processor. Item ID 13820.

Item ID: 14039 Contact: Austin Firewood Processor - This is Ph: (888) 401-6367 x703 Sam x702

‘05 Gehl CTL 70

‘83 John Deere ‘06 Western Star 4850 Item ID: 14073 Michigan Special Contact: Austin Item ID: 14011 Ph: (888) 401-6367 x703 Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘08 John Deere chain conveyer, 8 way splitter, on CT332 20,000lb goose neck trailer. Item ID Item ID: 13855 Contact: Sam Best Value Portable Log Splitter Ph: (888) 401-6367 x702 13916. Austin x703

- Small manufacturer in PA has

condition. Easily produces high x702 quality chips with patented ‘Cone’ 2004 AxCan 470easily - Thisload cutter drumHydro design. 42’

made the best valued log splitter. HydroAx 611Bup- New injectors, Handles logs to 32”. Uses injector pump. New 5.9 cummins 13HP Honda motor. Manual start

selling isEDGERS due to an & upgrade. GANGS Item

x702 adjustable to single two way. Great 1999 Hydroax - New Value! PA. Item511EX ID 12062. Sam x702

has 7000 hours. It’s a clean vansaround and produce 6 - 8 loads per and reason day. tight Item machine. ID 13882. Only Austin x703 ID 13846. Sam- x702 Brewco Saws Two Brewco Saws

2004 Hydro condition. Ax 670 - Engine has in excellent Runs great. Item ID 13644. Sam x702 about 500 hours, new saw motor

andFIREWOOD disc last year.PROCESSORS Previous owner 2010the Shop Built Wood Processor had hydrastats redone. This

- It has a 353 diesel, has a 22” highDetroit capacity head40and is insert circleMounted saw, 30 foot ainch very cleantooth machine. on

engine. Rebuiltoption hydraulic pump but electronic is available. and teeth.Uses Item4-way ID 13768. Sam Has new Log Lift. wedge

cummins with onlyis1500 Firewood engine Processor - This a homemade processor a 10’ hours. Caterpillar just with replaced

log deck. Has a hydraulic grapple, gear box to hydraulics at the end chain and kicker all total runs on off of summer. 11000that hours of a 4 cylinder power cutter. Tires areMercedes 28L’s @ 80%, 2 unit. Has a 4’ chain saw that kicks @ 40% and one slick. Brand new

a Chomper Model 16 PDA

automatice firewood processor 13799. Sam x702 with John Deere power unit with 1998 Hydro Ax 611EX Saw Head low hours. Control panel includes Feller Buncher - with about 8800 tach, oil pressure, water temp and hours. Bunching Saw Head has amp gauges. Cuts logs up to 16”. large pocket for accumulation and Item ID: 14048 One owner and comes with all Contact: Austin lifting side shield for notching manuals and receipts. Purchased Ph: (888) 401-6367 x703 larger trees before felling. new for $32,500. Item ID 13865. Cummins engine. 28L tires at 60%. Sam x702 Decent condition. rings forrunning wet weather. ItemItem ID ID

‘04 Komatsu WA500-3LK

LOGGING EQUIPMENT 13245. 13851. Sam x702 BANDIT

2002 621E - Arouund 2004 648GIII John Deere duel 1999 Hydro Bandit Ax 1900 Tracked Disc 12,000 hours on this machine. arch skidder. Slick Machine. Chipper - Cat Under Carriage at

Working daily. Item ID 13884. Runs good motor is top notch 50% or better. 475 hpin Cummins condition. Item ID 13610. Sam x702 Austin Diesel. x703 7500 Hours. One owner. 2004 John Deere 648GIII This 1998 711EX Saw Head Well maintained. Item Feller ID- 13294. machine 13000tires total Buncher 30.5-32 athours 40%; on Sam x702-has

the with only 3000 hours Cummins Engine rebuilt 1500 2004body, Bandit Beast Model 4680 - on the new motor, comes with a set 3412 Caterpillar Diesel Quadco engine hours ago; 8750 hours;

of chains, working daily. Item with 850 HP. Mill in ID 22” Large tree5300 sawhrs. head. Heat and 13878. Austin x703 good work. condition. Just finished 10 A/C New bearings in saw. 2004 John Deere 853G This track Acre clearing job, ready to work! Cutting trees today. Item ID 13353.

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘90 Bell Super T

capacity!. Item ID 13421. Sam x702

BARKO Item ID: 13896

Contact: Sam- Electric 1994 Barko 160B Web Site: www.paynesaws.com Ph: (888) 401-6367 knuckleboom, 30' boom,x702 75hp motor, Rotobec continuous

grapple, 5,000 original hours. John Deere Dual Arch Grapple, (excellent Item4000, ID John Deerecondition.). winch, Model

13238. Chris x700 Model 6BTA, Cummins Engine, 1995 Barko 775 B Feller Buncher Clark Transmission 28000. Item ID - Pumps recently redone. 400 hrs 13738. Austin x703 440B John Deere on injection pump. always started

KOMATSU Item ID: 14064 good. in good working order. 22in Contact: Austin 2007 Komatsu PC220LC w/2009 kohing head. head works great. Ph: (888) 401-6367 x703 Log Max 7000XT processing head.

Item ID 13185. Sam x702 9700 hours on carrier. 7200 hours 1999 Barko 160D - new engine with on Log Max. Excavator style.9400 Cab disc. Undercarriage 75%. approximately 1500 at hours. Hour guard. Flotation pads.Sam One owner. hours. Item ID 13796. meter dont work. The last 2x702 owners Very goodDeere condition. Item ID 2005 Feller have John only used it903G to load trucks or 13464. Sam x702 Buncher - GN 22’’ continuous as a backup asRoy needed. Has a CTR 2008 Komatsu D61-EX Dozer saw head.grapple Heated has & A/C cab. delimber, been rebuilt.

-Standard Greatcylinders Condition. 4511 Hours. boom. have Medium pads. Boom minor leaks. Komatsu U/C at 95%. 35% Pads. 6 Operator, service, and parts books Item ID 13694. Sam x702

included. Item IDEnclosed 13203.value Sam x702 Way Blade. Fully comfort 94 Barko 275 - Excellent 2006 JD 2554 Processor with 624 cab. Great price!. Item ID 13570. with low at hours at 3,500. 5.9 Waratah Processing Head. Sam x702‘Super’ CUMMINS continuous grapple. 10500 hours. Item New pumps. New 2012 D61EX 15 Dozer RunsKomatsu Great!. ID 13740. Sam

engine. New motors x702 only with 750drive Hours. Tripleon head. Almost New front BELLrails.Enclosed Rippers; Limbnew Sweeps; window. Super tight 1990with Bell Heat/AC; T - This Bell has cab 6machine. way blade; Runs great. One owner!. Item ID a brand new Duetz engine. Lever Undercarriage at 90%; Excellent

‘1

Ite Co Ph

‘0 Tr Lo

Ite Co Ph

War

Com

1050 and

engi

driv

Alm

UC.

tigh

x702

2006

wor and and

hou

2006

hou

1388

2006

skid

supp

read

now

hou and

good

little

1393 cutter is control. in excellent condition with Condition!. 13550. control,Sam 33”x702 bar, pump andSam tranny Remote Big production Item ID 13459. Sam x702 2006 new 30” pads, pump, 2006 JD 2554 Processor with KMC batteries and x702 34’s with 50% tread. Item ID 13828. center section. 20” single post  Issue 364 ❘ 388 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com KMC Track Skidder 2500P Sam x702 head. Heat and air work. Item ID 2014 Komatsu 450 - Only 1100  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

1988 John Deere Escanaba, Michigan

MID-ATLANTIC Item#LOGGING 13781 & BIOMASS Fri, 15 Sept - Sat, Contact: Sam 16 Sept

PUBLISHER

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolinax702 Ph: (888) 401-6367 www.midatlantic-logging-biomass expo.com/

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS ‘94 Caterpillar May be sent to morris@lumbermens.co 320

Item ID:POSTMASTER 13936 Send address changes to: Contact: Austin Lumberman's Exchange Ph: (888)P.O. 401-6367 x703 Box 1916 Columbia, TN 38402

The Lumberman's Exchange is 4000 hours.monthly Torque by convertor published Woods Publishing, P.O. Box transmission. 14 hole1916, wheels. Tires Columbia, TN 38402. All rights are 30.5’s at and one at 80%. reserved. All55% editorial/ advertorial submissions are used at the Center has very little slack. This discretion of the publisher and may skidder has a back skidder be edited forbeen purposes of up clarity and space. Although all efforts have for the several years. Skidder has been made to ensure accuracy of 12000 hours. Item ID 13805. Sam content submitted by advertisers and writers, the Lumberman's x702 Exchange, its principles and associates, are not520 held liablehard for to 1981 Timberjack - Very errors or omissions. Reproduction, come by! 653 Detroit. Runs Great!. in whole or part, is prohibited with out written consent. Item ID 13741. Sam x702 ©2017 Woods Publishing

2002 Timberjack 608s with hot saw

B. H. Payne .............................. 16 Baker ...................................... 5, 7

‘88 John Deere 440D Bell's Machining ..................... 27 Skidder

Dyna Products ........................ ‘98 Timberjack 1270B - 7,300 hrs. 35

Perkins 6 Cylinder Engine. All 8 Empire Hydraulics ................... modules and computer are brand34 Great Lakes Mfg. .................... new. Tires on average are around Hahn Machinery ...................... 3

80% Video: http://youtu.be/R_ Hurst Boiler ............................. 14 MQZe5QEFw. Item ID 13572. Chris Iron Bull ................................... 21 x700 Kilgore Saw ............................. 22 VALMET Lignomat 24 1998 Valmet ................................. 603 3-Wheeled

Buncher - 6500 hours on total

pressure guides. Top Casting wheel

S & W 125 Band Mill with Caterpillar generator - Low hours

Trelan Chipper

on the mill, electronic computer Set

Item ID: works,1 1/2"13866 or 2" band, 22ft. track Contact: Sam Cat 3406 140KW Genset, 12,400

Ph: (888) 401-6367 x702 hours ready to run. Item ID 13434.

Sam x702

Mud CARRIAGES Tracks. Front blade. Hood & DRIVES

2010 Cardinal Carriage guard. Item IDHD 12267. Sam x702

58” Precision Chipper M&F Gauge ............................. 28 John Deere Item ID: 13975 640 Meadows Mill, Inc. ................ 33 Contact: Austin Grapple Skidder

Carriages (Sawmill) - Cardinal 2005 Valmet 941 Harvester - Totally

Carriage linehead it includes refurbished to toe! carriage Very good with onboard log turners, carriage running condition. Over $50,000 in Item ID: 13961 drive, pac for recent hyd updates andcarriage, maintenance.

‘15 Cord King M44

Menominee Saw ..................... Ph: (888) 401-6367 x703 29 Item# 13848

Contact: Sam Inc. .............. 30 Metal Detector's Ph: (888) 401-6367 x702

Reman Cummins Engine. Brute Force Mfg. ..................... 31 Midwest Sharpening .............. 26 Item ID: 13781 Equipped with 18” Waratah High Buck Equipment bark ..................................... 9 Contact: Sam (AIM) ........ 36 Mor 1996 Timbco T425B FB w/2008 Speed Disc Saw. 28L x 26 Tires at Ph: (888) 401-6367 x702 Corley Mfg .............................. 32 Multitek ................................... 12 CRD Metalworks .................... 25 in very good shape and has been CW Mill-ArmorHog .............. 17 well maintained. Item ID 12194. CWx702 Mill-Hogzilla ................... 15 Sam

Ite Con Ph

Item ID 13876. Austin x703

** INFO LINK** B & B Mfg. ............................... 18

Item ID: 13940 Contact: Austin itPh: includes sets of Mcdonough (888)two 401-6367 x703

that go up and down, with airbags,

Sch Gr

feet a minute also has CLT presses.

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

‘04 Woodmizer bells and whistles, its a production LT70 Hydraulic

with 44 inch wheels, and all the

in ve1y good condition, Cuts 130

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

feed deck 20 foot out feed deck

is an extremely accurate machine

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

10 hours on this machine since it

is supported on both sides. This

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Danckaert Band Resaw - Roughly

machine, with air strain conveyers

440D

Woods Publishing

BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Rotosaw Intermittent Saw Head. 40% complete with chains. This Piper's Saw Shop.................... 13 Machine has 540 degree non well machine has been extremely Rotochopper ............................ 40 continuous upper. 9900 maintainedrotation and runsonvery well.

Row ............................ 20 hours. New New HardElectric to findUndercarriage. them in this good glass in cab. Very good running Sawmill Exchange of condition. Has a .................. twin that is11 condition. Rotosaw has 360 degree available if you......................... need two units.19 Select Sawmill rotation. Cummins 6CT8.3 engine Item ID 12524. ........................... Sam x702 Smith Sawmill 4 with 215 HP. Machine runs great. 2005Paul Valmet 860.1 Show 8-Wheeled The Bunyan ......... 39 Working in select hardwood today. Forwarder - 17,800 hours. New Thomas Item ID Industrial 13548. SamControls x702 ..... 10 hydraulic transmission and gear 1997 Timbco Clam Bunk Union Grove 820C Saw & Knife .. 2, 37 box in 2013. $70,000 of updates in ForwarderRefiner - “4000”................... original hours. Universal 23 2012. Bogies just resealed. Spare 20.3 x 25 rubber at 70%. Hand WoodMizer ................................ l pump ($7,000 value) Good running sanded and painted, brand new condition. Sisu engine uses 4 gal/

Contact: Austin sawyers cab,pin computer controls, New center bushings; new Ph: (888) 401-6367 x703 cabinet with electronic drives for bogey seals; valves resealed; all

carriage husk including cylindersknees, packed. 10,200 hours. 48" bottom saw and 36" top saw computer Scorpion controls, Largest ofand rubber tired harvesters.

added speed370.2 control. 2 sets ofhead Has Valmet processing tracks , allthan new4000 Lexan. Located in with less hours. Engine

STACKING RAC

Alberta, Canada. runs well. Tires atCustomer 50%. Thiswill is a pay shipping to closest US entry hard to find gem and priced below

point. Item IDID 13532. Sam x702 market. Item 12569. Sam x702 1998 Timberline Stroke Delimber 2005 Valmet/Timbco 415 Harvester 8400 hours. U/C at 60%. Will crank with 370E Head - 15,400 hours. and run. Owner retired. Machine 370E Harvesting head just added idle for past year. Item ID 13599. in 2010 and has 7000 hours. 36” Sam x702 Triple Grouser tracks rebuilt one 1999 Timbco 820D Clam Bunk year ago and are at 80%. Sisu Forwarder - 10,300 hours. New engine that is very stingy on fuel. engine less than 500 hours ago. 8’ squirt at end of boom for 30’ Can accept bunks, but none with www.BakerProducts.net reach. Reversible fan and auxiliary machine. Owner has two sets of 800.S48.6914 I S73.663.7711 oil cooler. Still runs OK. Cutting

20 53

Ite Co Ph

track

addi

Sam

1999

11k h

engi

fresh 28L

dece

but c and

coul

bush

1321

2000

4-Ro

on m

engi

U/C

with

pum

new

cool

Pack

extra

-USED FORESTRY SALE  EQUIPMENT TODAY ❘ capacity.  24/7 SUPPORT ❘ today 1986 (888) 401-MENS 13  exch L! 401-MENS SALE ❘ butl§ but will someNO. basic hour. 16 ton One set of  since Approx. 6000 hours,EQUIPMENT Machine is FOR machine noSELL hoursYOUR on 4BT3.9 0 SUPPORT TODAY Issue 364 Lumbermens ❘ needs  List seLL

 Issue 364

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Carbide Debarker Tools

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

2006 CAT 517

Item ID: 13869 Contact: Sam Ph: (888) 401-6367 x702

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘14 Hurdle 3-Hd Ph: (888) 401-6367 x703

Block Sawmill

Item ID: 13997 Contact: Austin Ph: (888) 401-6367 x703

Debarker tools, tips, teeth, or toes. Whatever you call them, we make them. Universal’s carbide toolsC6 fit ‘95 John Deere Hosmer-Type debarker heads.

Tree Farmer

Item ID: 13920 Universal Wearparts, Inc.

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder 142 Old Hwy. 98 West 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Tylertown, MS 39667 Item ID: 14078 Firewood Proc. 800-647-8440 • 601-876-3442 Contact: Austin capacity!. Item ID 13421. Sam x702 Fax 601-876-2342 Item ID: 13865 Ph: (888) 401-6367 x703 sales@universalwearparts.com BARKO Contact: Sam www.universalwearparts.com ® Ph:Barko (888)160B 401-6367 x702 1994 - Electric

off onto a conveyor. This is a very ‘14 Komatsu WA200

well built processor. Item ID 13820. Loader Sam Onex702 Owner, low hours! Firewood Item ID:Processor 14010 - This is

‘05 Gehl CTL 70

‘83 John Deere 2000 W900 KW w/ 4850 Rotobec MT27 Item ID: 14073 Heavy Spec Contact: Austin

Item ID: 13993 Ph: (888) 401-6367 x703 Contact: Austin Ph:1700 (888) 401-6367 with hours, in very x703 good

condition. Easily produces high hours on this machine, in excellent quality chips with patented ‘Cone’ condition. Item ID 13937. Austin drum design. Can easily load 42’ x703 vans and produce 6 - 8 loads per

LIEBHERR

day. Item ID 13882. Austin x703 2007 Liebherr A924C Log Handler

EDGERS & GANGS

Rubber Tired Log Loader. 13,000 Brewco Saws - Two Brewco Saws hours. 40’ Reach with two section in excellent condition. Runs great. boom. 60” Log Grapple with Item ID 13644. Sam x702 continuous rotation. Fixed Cab

FIREWOOD PROCESSORS

Riser with cab guard protection. 2010 Shop Built Wood Processor Front push blade. Tight and dry. - It has a 353 Detroit diesel, 40 Cleaned, Serviced, and Checked inch insert tooth circle saw, 30 foot out for service. Can pull loaded

Item ID: JW-986495 Contact: J Williams ‘04 CAT 953C FrontPh: (888) 401-6367 x701

end Loader

Item ID: 13854

chain conveyer, 8 way splitter, on Contact: Sam

20,000lb goose neck trailer. Item ID Ph: (888) 401-6367 x702 13916. Austin x703

Best Value Portable Log Splitter trailer. 4-Wheel drive and steering. - Small manufacturer in PA has Top Quality machine. Would be made the best valued log splitter. great for log yard or mill work. Handles logs up to 32”. Uses Item ID 13476. Sam x702 13HP Honda motor. Manual start 2011 Liebherr A904 Rubber Tired but electronic option is available. Log Handler. Liebherr 4 cylinder Has Log Lift. Uses 4-way wedge engine with great fuel economy. adjustable to single two way. Great 11,230 hours. Fixed cab riser. Two Value! PA. Item ID 12062. Sam x702 section boom with 38’ reach. Cab Firewood Processor - This is a protection. 4-Wheel drive and homemade processor with a 10’ steer. Can pull loaded trailer. log deck. Has a hydraulic grapple, Cleaned, serviced and inspected. chain and kicker that all runs off Tight and dry and ready for work. of a 4 cylinder Mercedes power Located in Baltimore, MD. Item ID unit. Has a 4’ chain saw that kicks 13477. Sam x702

aContact: Chomper Model Austin16 PDA

Ph: (888)firewood 401-6367 x703 automatice processor

with John Deere power unit with

low hours. Control panel includes 2011 Liebherr A924 Rubber Tired tach, oil pressure, water temp and Log Handler. Liebherr 4 cylinder amp gauges. Cuts logs up to 16”. engine with great fuel economy. One owner and comes with all 11,230 hours. Fixed cab riser. Two manuals and receipts. Purchased section boom with 38’ reach. Cab new for $32,500. Item ID 13865. protection. 4-Wheel drive and Sam x702 steer. Push blade. Can pull loaded

LOGGING EQUIPMENT BANDIT

trailer. Cleaned, serviced and

inspected. Tight and dry and ready 1999 Bandit 1900 Tracked Disc for work. Located in Baltimore, Chipper - Cat Under Carriage at MD. Item ID 13478. Sam x702 50% or better. 475 hp Cummins

LINK-BELT

Diesel. 7500 Hours. One owner. 1997 Linkbelt 3400 has rebuilt Well maintained. Item ID 13294. Pierce Stroke Delimber. 36” Pads Sam x702 on 60% undercarriage. 5221 hours. 2004 Bandit Beast Model 4680 Good running condition. Owner 3412 Caterpillar Diesel engine just spent $30,000 on upgrading with 850 HP. 5300 hrs. Mill in delimber. Item ID 12992. Sam x702 good condition. Just finished 10

MORBARK

Acre clearing job, ready to work! 1987 Morbark 27 WCL NEEDS Remote control. Big production MOTOR - Morbark 1000 Knuckle

 Issue 364 ❘ 388 Lumbermens™  since 1986  List  seLL  exchange  buy  save  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exchange  buy  save ❘

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous boom loader, 3 knife disc, Newer grapple, 5,000 original hours. discharge chute, New banding (excellent condition.). Item ID around disc, Brakes and tires are 13238. Chris x700 also OK, Everything works well 1995 Barko 775 B Feller Buncher Newer clutch -- with outboard - Pumps recently redone. 400 hrs bearing, Had Cummins KTTA 750 on injection pump. always started HP engine -- needs repower. Item good. in good working order. 22in ID 12443. Sam x702 kohing head. head works great. 1997 Morbark Model 2400 Chipper Item ID 13185. Sam x702 - Has a Cumins diesel engine and 1999 Barko 160D - new engine with runs great. All fluids and filters approximately 1500 hours. Hour have been changed. Item ID 13429. meter dont work. The last 2 owners Sam x702 have only used it to load trucks or 1999 Morbark 1400 Tub Grinder as a backup as needed. Has a CTR Loader w/Cab; 4200 hours; Very delimber, grapple has been rebuilt. good condition. Located in PA. Boom cylinders have minor leaks. Item ID 13361. Sam x702 Item ID 13694. Sam x702 2006 Morbark 6600 Horizontal 94 Barko 275 - Excellent value Grinder - Approx. 6000 hours on with low at hours at 3,500. 5.9 this well maintained machine. CUMMINS continuous grapple. Has New Cat Dealer Rebuild Runs Great!. Item ID 13740. Sam 1000HP Engine at 5000 hours. x702 42” X 66-5/8” HAMMERMILL;

BELL

VARIABLE SPEED INFEED 1990 Bell Super T - This Bell has SYSTEM; HAMMERMILL a brand new Duetz engine. Lever DRIVE INCLUDES ALL BELTS, control, 33” bar, pump and tranny SHEAVES, BUSHINGS &

❘  LumbermensCO.com  Lumbermensmagazine.com

ngle Joystick Control 0 Ton Splitter • 67 HP CAT Diesel Cylinder Engine

o Choose From!

4000 SERIES

BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS ManyPROCESSORS Models & BELL’S FIREWOOD CALENDAR**

• 67 HP CAT Diesel • 44” Circular Engine Saw 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Diesel Capacity • Single Joystick FIREWOOD TUMBLER • Single Joystick Control Saw • Sturdy HSS Steel Welded Control • 30 Ton Splitter er • 30 Ton Splitter • 4’ Diameter Barrel Cylinder Cylinder • 67 HP CAT Diesel ick • Clean Out Chute

4000 SERIES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Options to Choose From! 4000 SERIES

Many Models & FIREWOOD TUMBLER • Sturdy HSS Steel Welded 4000 SERIES Options to Choose From! • 4’ Diameter Barrel

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

www.starwebhosting.net/woodsmen/ 67 HP CAT Diesel • 44” Circular Saw •• Removes Debris & Bark as large as• Clean 2 ¼”Out Chute • 67 HP CAT Diesel er Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic Lift conveyors ••Single 44”Joystick Circular Saw 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Pack Available Capacity Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder Capacity Hot Springs, Arkansas • 4’ Diameter Barrel Control • Single Joystick • Clean Out Chute www.arkloggers.com • 30 Ton Splitter Control • Removes Debris & Bark as large as 2 ¼” Cylinder Engine

4000 SERIES4000 SERIES SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August The Tree Many Models & Many Models & that Started Options to Choose From! Options to Choose From! it Models All! • 30 TonMany Splitter Lift conveyors &• Works with all of our Double chain Hydraulic 72ND ANNUAL GREAT LAKES Cylinder • Optional Honda Power Pack Available Options to Choose From! Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Many Models & FIREWOOD TUMBLER Made In published a monthly circular Canada Options to Choose From! FIREWOOD • Sturdy HSSTUMBLER Steel Welded Thurs, 7 Sept - Sat, 9 Sept

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

•• Sturdy HSS Steel 4’ Diameter BarrelWelded reaching sawmills, loggers, Escanaba, Michigan Clean Out Chute •• 4’ Diameter Barrel TUMBLER pallet makers,FIREWOOD recyclers and Many Models & • Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS Steel Welded• FIREWOOD TUMBLER Out Chute industrial woodworking plants • Sturdy HSS Steel Welded Works withDebris all of our Double chain Made In • 4’ Diameter Barrel Options to Choose From! LOGGING & BIOMASS •• Removes & Bark asMID-ATLANTIC largeHydraulic as 2 ¼” Lift conveyors worldwide. • Clean Out • 4’ Diameter Barrel • Optional Honda Power Pack Available Chute

machine, with air strain conveyers that go up and down, with airbags,

Canada Many Models • Works with all&of our Double chain Hydraulic Lift-conveyors Please Call for Details • Clean Out Chute Fri, 15 Sept Sat, 16 Sept • Removes DebrisDebris & Bark as large as 2 ¼” • Removes & Bark large Made In as 2 ¼” Honda Power Pack Available •as Optional PUBLISHER • Works with all of our Double chain Hydraulic Lift conveyors • Works with all of our Double chain Hydraulic Lift conveyors Selma, North Carolina Options to Choose From! Canada Woods• Publishing Optional Honda Power Pack Available FIREWOOD TUMBLER Optional• Honda Power Pack Available www.midatlantic-logging-biomass • Sturdy HSS online Steel Welded MID-ATLANTIC or visit us ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO • 4’ Diameter Barrel

1-888-995-1965

Details

it includes two sets of Mcdonough pressure guides. Top Casting wheel

supported on both sides. This Every ReputableisisWide Band an extremely accurate machine Supplier Offers in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO

www.bellsmachining.com • Clean Out Chute Morris Woods FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” (888) 401-6367 ext. 704 Financing • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors morris@lumbermens.co Made In Please Call for Details • Optional Honda Power Pack Available

MARKETING DIRECTOR 1-888-995-1965 John Williams

-1965or visit us online

Made In Canada

(888) 401-6367 ext. 701 j@lumbermens.co www.bellsmachining.com

3 High Quality Swedish feet aSteel minute also has CLT presses. 3 3” – 8” Band WidthItem ID 13876. Austin x703 S & W 125 Band Mill with 3 16 to 20 Gage 3 Double Cut OptionsCaterpillar generator - Low hours on the mill, electronic computer Set THE PAUL BUNYAN SHOW 3 Choice of Swage or Stellite

Fri, 15 Sept - Sat, 16 Sept • 4’ Diameter Canada Barrel • Clean Out Chute Lexington, Kentucky MadeDebris In • Removes & Bark as large as 2 ¼” Canada http://www.kfia.org/ • Works with all of our Double chain Hydraulic Lift conveyors KentuckyWoodExpo.aspx • Optional Honda Power Pack Available

nline ‘06 Please CallPlease for Details Call for Details Brewco B1600 DESIGN DIRECTOR Financing Available 1-888-995-1965 Donna1-888-995-1965 Heninger ning.com Resaw Please Call fororDetails visit us onlineCall for Details Please EQUIPMENT REPS or visit us online www.bellsmachining.com ailable Item ID: 13862 1-888-995-1965 Sam Wall Financing Available Made In Canada

1-888-995-1965

www.bellsmachining.com Contact: Samext. 702 (888) or visit us 401-6367 online Financing or visitx702 usAvailable online sam@lumbermens.co Ph: (888) 401-6367 Made In www.bellsmachining.com Please Call for Details ‘05 Woodmizer Canada www.bellsmachining.com Austin Woods Financing Available

Now One Phone Puts You in1-888-995-1965 Touch with ThE Single LT300 Source (888) 401-6367 ext. 703 Available Financing or visit us online austin@lumbermens.co INFO Item ID: 14031 for all your Sawmill Needs! www.bellsmachining.com Contact: Austin MAILING ADDRESS

Financing Available &Ph: B Mfg . ............................... P.O. Box 1916 (888) 401-6367 x703 18 Please Call for BDetails Corley Columbia, TNSawmill 38402-1916maChinery B. H. Payne .............................. 16 (888) 401-6367 Berry Carriage DriveS Tyrone

1-888-995-1965

Baker ...................................... lewiS ConTrolS opTimizaTion 5, 7 AD SUBMISSIONS or visit us online

May be sent to Bell's Machining ..................... 27 www.bellsmachining.com morris@lumbermens.co Carriage Linear & Set Shaft

Brute Force Mfg. ..................... 31 Available

Financing Lewis Controls “Electronics for sawmills by sawmillers”

POSTMASTER John Deere 548G2 Tyrone-Berry Carriage Parts Equipment • Headrig Slabbers (AIM) ........ 36 Send address changes to:Drives & Buck

ItemLog ID:Turners 14042 Lumberman's Exchange • Bandmills & Linebar Resaw Systems Corley Mfg .............................. 32 Contact: Austin P.O. Box 1916 Board & Gang Edgers • Trimmers Columbia, TN 38402x703 Ph: (888) 401-6367 CRD Metalworks .................... 25

‘14 B66TD TheExchange Most Complete Line of Sawmill .............. 17 The Lumberman's is CW Mill-ArmorHog Rotochopper published monthly by Woods - 3410 hours. $32,000 in recent Machinery

Since 1905!

CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Item ID: 13838 upgrades repairs. Fecon Columbia, TN and 38402. All rights Dyna Products ........................ 35 Contact: Sam Single Machine or Complete Turn-Key Operation reserved. AllMulching editorial/Head. advertorial BH250 Item ID (888) 401-6367 603 8 submissions are used at the More Production & Profit isEmpire OnlyHydraulics One CallExt. Away ................... 13502.ofSam discretion the x702 publisher and may For Parts, Service & Sales be edited for purposes Great Lakes Mfg. .................... 34 2011 Tigercat 620Dof- clarity This is a and space. Although all efforts have ItemMachinery ID 13408. Sam x702 hour skidder with only Hahn ...................... 3 beenlow made to ensure accuracy of 5500 content submitted by advertisers 2014 Tigercat 630D Grapple hours on a cummins engine and Hurst Boiler ............................. 14 and writers, the Lumberman's Skidder - Dual Arch Grapple. Just a fire suppression Comes Exchange, its principlessystem. and Iron Bull ................................... 21 associates, are on not35.5 heldtires liableatfor 1990 hours. 3 year/5000 hour PT mounted 50% back errors or omissions. Reproduction, Kilgore Saw ............................. 22 warranty. 35.5 tires with dualing and 40% front and good chains in whole or part, is prohibited with on Lignomat ................................. 24 out written consent. www.corleymfg.com • sales@corleymfg.com rings at 60%. Wide blade. Winch. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing

mfg

Call (423) 698-0284 CORLEY

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio BUT ONLY www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track

WOLVERINE

Cat 3406 140KW Genset, 12,400

THE hours ready to run. Item ID 13434. Sam x702 BY MENOMINEE SAW GUARANTEES

CARRIAGES & DRIVES • Cutting Edge Plasma Welds 2010 Cardinal HD Carriage • The Industry’s HighestCarriages Band (Sawmill) Saw Capacity - Cardinal Carriage line it includes carriage • Quick Delivery from our HUGE Inventory M&F Gauge ............................. 28 with onboard log turners, carriage • Fast Program Meadows Mill,Sharpening Inc. ................ 33& Exchange drive, hyd pac for carriage, to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, ‘89 Cat D4H LGP • Competitive Pricing ‘03Detector's John Deere cabinet with electronic drives for Metal Inc. .............. 30

LINK**

Item ID: 13999

748GIII

carriage knees, husk including Midwest Sharpening .............. 26 Contact: And ONLY Menominee Gives YouAustin Everything 48" bottom saw and 36" top saw Ph: (888) 401-6367 Item ID: 13851 Morbark ..................................... You need in a 9Wide Band Saw – Plus x703

Contact: Sam Ph: (888) 401-6367 x702

Multitek ................................... Expert Service 12 from

the Industry’s Most Knowledgeable Staff. Piper's Saw Shop.................... 13

Rotochopper............................ 40

Got a Wide Band Problem? Saw Today and You’ll Sawmill Exchange 11 Mills Trust the Pro! Learn.................. Why More

Row Electric ............................ 20 Call Menominee Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

234B. Only 300 hours on this

‘04 Hood Loader TOLL FREE 28000

1-800-582-0470 Item ID: 13971 Contact: Austin

900 16th St., Menominee, MI 49858 Ph: (888) 401-6367 x703 Tel: 906-863-2609 Fax: 906-863-1147 Universal Refiner ................... 23 info@menomineesaw.com 2004 JohnEmail: Deere

Union Grove Saw & Knife.. 2, 37

hours, 36” pads. It does have some www.BakerProducts.net

648G WWW.MENOMINEESAW.COM III 800.S48.6914 I S73.663.7711 small leaks. Owner is going back

WoodMizer ................................ l

and no winch. Center pins are tight Item ID 13526. Sam x702 Item ID: 13878 - USED FORESTRY EQUIPMENT FOR SALE  SELL EQUIPMENT TODAY ❘ Austin grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT 2015❘ Tigercat 234BYOUR Loader - Model Contact: and extra fuel tank. Item ID 13929. roatation on the w/ a Sam x702

STACKING RAC

Ph: 401-6367 30’ (888) reach on the boom.x703 Joystick

to rubber tired cutters because his ❘ 2006  (888) 401-MENS L! 401-MENS Tigercat 630C GrappleNO. 15 job has changed. Item ID 13898. Skidder - Very good running Sam x702

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

All Sizes Available!

BANDSAW

TOP PERFORMING, economical blades for all primary &

BLADES

“Precision Under Pressure”

secondary wood processing. Welded to your lengths! We also offer expert sharpening services, plus...

Gang • Edger • Scragg • Trim • Split • Strob ....and just about any Custom Saws you need to keep you cutting longer... for less. Ask about FREE Shipping!

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

231-924-5953

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Call Marvin Miller for a quote

(fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425

ROW ELECTRICAL EQUIPMENT, INC. • • • • •

Squirrel Cage Motors Gear Motors Wound-Rotor Motors Synchronous Motors DC Motors

DC Motors - Crane and Mill Item ID: 13920Starters Adjustable Speed Drives • Across/Line Magnetic Contact: ‘13 KMC 2500 Track Generators - AC and DC • Reduced VoltageAustin Starters Ph: (888) 401-6367 x703 Engine-Generator Sets • Safety Switches Skidder LUMBERMEN’S Equipment Digest Transformers, Single Phase • Phase Convertors PO Box 1146 Item ID: 14078 Columbia, TN 38402-1146 P.O. Box 2812 • Toledo, Ohio 43606 Contact: Austin 1-800-477-7606 Fax (931) 388-3564 capacity!. Item ID 13421. Sam x702 WWW.RoWELECTRiCAL.CoM Ph: (888) 401-6367 x703 www.lumbermenonline.com

LUMBERMEN’S

• • • • •

800-248-4479

13428 Victory Ln. // POEquipment Box 124 to Adams Center, NY 13606ax Digest

‘95 John Deere C6 Tree Farmer • Transformers, Three-Phase

YOUR SOURCE FOR USED, RECONDITIONED:

419-244-8887

BARKO 419-248-4479 rowelec@glasscity.net 1994 Barko 160B - Electric WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

PROTECT Them ALL ‘05 Gehl CTL 70 ® With Pro-Tec-To Wrap ‘83 John Deere Firewood Processor - This is a Chomper Model 16 PDA

Bell Ultra T on Tracks

Item ID: 14023 Contact: Sam Ph: (888) 401-6367 x702 Item ID: 14073

4850

Item ID: JW-986495 ‘16 Halverson Contact: J Williams H140 Skidsteer Ph: (888) 401-6367 x701 Item ID: JW-192810 Contact: J Williams Ph: (888) 401-6367 x701

automatice firewood processor

with John Deere power unit with

‘05 CAT TK560 low hours. Control panel includes Item 14004 tach, oil ID: pressure, water temp and Contact: Sam amp Cuts logs up to 16”. Ph:gauges. (888) 401-6367 x702

Hydraulic Lines – Fuel Hoses – Air Lines chain conveyer, 8 way splitter, on One owner and comes with all 1977 (est)and FMC 220CA Purchased Tracked Electric Wire Bundles – Control Cables 20,000lb goose neck trailer. Item ID manuals receipts. Contact: Austin

with winch, direct drive. Comes

does great job in hardwood. Priced

Skidder w/ESCO Swing Boom

Has only 2600 hours. Has new

Best Value Log Splitter John DeerePortable 20 hole Sweda wheels

Sam x702 Front blade. Detroit 6V53 engine.

Ph: (888) 401-6367 x703

with 6000 hour extended warranty.

13916. Austin x703

to sell!. Item ID 12206. Sam x702

new for $32,500. Item ID 13865.

Grapple - Good running condition.

® PRO-TEC-TO--®These WRAP & PRO-TEC-TO SLEEVE Small manufacturer in PA LOGGING EQUIPMENT 50’s are mounted onhas hard No winch....they cannot fit with on front. Still a new skidder and to find 20 hole John Deere sweda swing boom grapple. CUThigh YOUR made DOWNTIME AND YOUR COSTS! BANDITMilitary style condition. Easily produces the best valued log splitter.

withX1700 hours, inrear veryand good 30.5 32 26 ply on 70%

priced to sell. Item ID 13696. Sam

rims. Still 50% tread left on these

tracks at 70%. Item ID 13227. Sam

quality chips with patented ‘Cone’ logs up to 32”. UsesRubbing1999 Bandit 1900 Tracked Disc Protection AgainstHandles Pinching, Crushing, & Abrasion

x702

drumJD design. Can easily load 42’ 2013 848H Grapple Skidder -

tires. 4 available. Item ID 13852.

x702

13HP Honda motor. Manual Chipper - Cat Under Carriage at – EVEN UV RAYS! Sam Bothx702 are Impervious tostart Oils and Solvents. 2012 Refurbished FMC 210 Tracked

vans hours. and produce - 8 loads per 4200 Tires at6 50%. Winch.

but electronicFABTEK option is available.

Very goodID running Pins day. Item 13882. condition. Austin x703

2004 Fabtek Has Log Lift.546C UsesForwarder 4-way wedge

runs great. Item ID 13555. Sam

in front at 60%. 650 tires in back at

Provides Maximum Protection for Logging, Good running condition. 30.5 tires Construction & Stationary Applications EDGERS & GANGS adjustable to Like: single two way. Great

are tight. Machine is dry. Engine

50% or better. hp Cummins Skidder - 1976475 Model that has been totally 2012. No Diesel. refurbished 7500 Hours.in One owner.

For The Distributor WellNearest maintained. Item ID 13294. You, Call Includes warranty on machine and hours since updates were done.

800-355-1250

Brewco Saws - TwoBuggies Brewco• Saws Value! Itemwith ID 12062. x702 tracks. Sam x702 • Debarker Pantograph60% Arms •PA. Forklift Masts x702 and come tracks.Sam Front Detroit 6V53 engine with • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders in excellent condition. Runs great. Firewood Processor - This is a 2004 Bandit 4680 1991 John Deere 640D Skidder blade. JD engine. One owner. 195HP. ClarkBeast 28000 Powershift orModel Visit • Fellerbuncher Heads • Harvesting Headsbunk. • Stroke -Item 23.1ID x 26 Tires 50%, Rebuilt Double Item ID 13363. Sam transmission. Clark 40,000 lb www.pro-tec-toproducts.com 13644. Sam x702 3412 Caterpillar Diesel engine homemade processor with a 10’ Delimbers • Dozer Blades Trans.,Good Tight Machine. Item x702 Winch. ROPS Cab. Includes bolt FIREWOOD PROCESSORS with 850 HP. 5300 hrs. Mill in log deck. Has a hydraulic grapple, ® FMC Hoses & Wires Are – Pro-Tec-To Products 2010 Shop Built Wood Processor chain and kicker that all runs off 1995 JD 290D Hytec 4700 (est)Costs, FMC 220CA Tracked Offerswith Maximum Protection,1977 Lower Reduced - It has aDowntime 353 Detroit diesel, 40 of a 4 cylinder Mercedes power Harvester Head - 290D in good Skidder Good running unit. and Less Spills!

ID 13191. Sam x702 Anywhere

condition. just overhauled. inch insert Engine tooth circle saw, 30 foot

Detroit 6V53 and that runskicks unit. Has a 4’cranks chain saw

pump. Runs well. Cab has heat

Fixed ESCO Grapple and working

Undercarriage at 50%. New water

 Issue 364 388

well. Military style tracks at 70%.

Lumbermens™  since 1986

and air with stereo and all run

well. Head recently updated and

❘

OEM’s, Repair Facilities & Sam good condition. finished 10 New Paint. ItemJust ID 12731. Distributor Inquires Welcome Acre clearing job, ready to work! x702

FRANKLiN Remote control. Big production

1995 Franklin 170 - Enclosed cab,

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

Sanborn Scragg Mill

- Pumps recently redone. 400 hrs

on injection pump. always started Item ID: 14050

good. in good working order. 22in Contact: Austin Woods (888) 401-6367 kohing head. head Ext. works606 great.

Item ID 13185. Sam x702

13910. Austin x703 1999 Barko 160D - new

engine with

Franklin 170 Skidder - This would

approximately 1500 hours. Hour

be a great starter skidder. It is

meter dont lastRuns 2 owners a single archwork. with The winch. have only used good. it to load trucks good and pulls Detroit 453or

turbo and 3 speed power shift as a backup as needed. Has a CTR

transmission. Good center section.

delimber, grapple has been rebuilt.

There are a few leaks, but nothing

Boom cylinders have minor leaks. major. Item ID 13819. Sam x702 Item ID 13694. x702 Franklin 3000 - Sam 4BT Cummins

engine with 600 94 Barko 275approximately - Excellent value

hours. Needs tires. Good machine

with low at hours at 3,500. 5.9

for the money and for a start up

CUMMINS continuous company. Item ID 13786.grapple. Sam x702

RunsFranklin Great!. Item 13740.Skidder Sam 2003 Q80ID Grapple -x702 7500 hours, but just 5000 hours

on reman engine. New Radiator;

BELL

New Hydraulic Pump; Comfort

1990with Bell good Superworking T - This heat Bell has cab and

a brand Duetz engine. Lever air; Tiresnew at 80%. Item ID 12450. Sam x702 control, 33”

bar, pump and tranny

GMC

single arch with a winch, new

2000 GMC 1.5 ton Service Truck

tires, around 15000 hours. Item ID

big boxes, covered hose reels,

 List  seLL  exchange  buy  save

Winch. Front Blade. Item ID 13226. Sam x702

on grapple head with full function.

motor, Rotobec continuous

paint, 4 brand new 23.126 firestone

❘

 LumbermensCO.com

- PTO driven air compressor,

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer Ford Bucket / Boom Truck 2008 Cat Skid Steer 289C

Item ID: 80919

2008 Ford F-750 XL Super Duty Forestry Bucket Truck /

Bucket - Boom Truck Cummins Diesel Engine , 6 Speed Item ID: 60484 Manual Transmission 81917 Miles , 8909 Hours Lift All LSS-55-1S Boom With 65ft Work Height, 11ft Chip Dump 13428 Victory Ln. // PO Box 124 Box We do have 3 of these trucks up for sale. Call for Original Owner! All maintenance records since brand new! 2 Available!! 5864 hours Adams Center, NY 13606 more pictures.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘132014 KMC 2500M20R Track Morbark Forestry Track Chipper Skidder Item ID: 46375

Item ID: 14078 Cat C9 325HP Tier 4i Engine. PT Hydraulic Clutch. 1342 Contact: Austin Hours. Excellent Condition! Original Owner! All service records since brand new! Ph: (888) 401-6367 x703 Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 onto a or (801) 319-9351 off conveyor. This is

a very

H O T

B U Y S

Sam x702

Firewood Processor - This is

2009 Bandit 90XP Pull‘83 John Deere Behind Wood Chippers

4850Item ID: 86220

Item ID: 14073 Contact: Austin Ph: (888) Contact: TED 401-6367 x703

Perkins Diesel Engines. 12” rating. 2 AVAILABLE!!. 2400 hours.

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS Jackson Lumber Harvester Circle Mill

Brewco Saws - Two Brewco Saws

in excellentItem condition. Runs great. ID: 2346

Item Sam 56" saw,ID new13644. teeth, extra box ofx702 new teeth, all new belts,

453 Detroit, runs on a rope, stand on carriage, Jackson Lumber Harvester edger, edger cuts up to 4" thick, has all new bearings, it has been completely gone through, cuts up to 18' length, saw 200 ties a day with 4 people, completely Manual 2010 Shop Built Wood Processor mill Call for more pictures!

FIREWOOD PROCESSORS

- Contact: It has aMARK 353 Detroit diesel, 40

Email: Mark@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 708 OR 702-875-2703

 Issue 364 388

Item ID: JW-986495 Contact: J Williams Morbark 3800 Ph:'07 (888) 401-6367 x701

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

Horizontal Grinder

tach, oil pressure, water temp and

All service records since brand new! Brand New Engine!

approx 300 hours on rebuilt motor, 24000 frame hours, manuals andandreceipts. Purchased tight center ponds bushings, blade pins and bushings

John Deere 540E Cable Skidder

Item ID: 84439 chain conveyer, 8 way splitter, on Only 3662 Hours!!! Excellent Condition! Original Owner!

amp gauges. Cuts logs up to 16”. Item ID: 34474 One owner and comes with all John Deere 540E great running, currently working machine,

13916. Austin Contact: TED x703

are good, chains are included Tranny shifts great, currently working!for Call $32,500. for more Pictures! new Item ID 13865.

Current CARBgoose Tags! 20,000lb neck trailer. Item ID

Email: Teds@lumbermensco.com

Best Value PortableEXT Log Splitter Phone: 888-401-6367 701

or (801) 319-9351

- Small manufacturer in PA has

made the best valued log splitter.

Contact: MARK Sam Email:x702 Mark@lumbermensco.com

LOGGING EQUIPMENT BANDIT

Phone: 888-401-6367 EXT 708 OR 702-875-2703

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

2010 John Deere TCSam Skidder Value! PA. Item ID648H 12062. x702 Item ID: 57023 Firewood Processor - This is a 2010 John Deere 648HTC, dual arch, torque converter mahomemade with30.5a tires 10’ 2 are chine, New center processor pins, 6 new injectors, less than a year old, 2 approx 40% replaced the harmonic balancer, has 9777 hours. The machine hasgrapple, been very well log deck. Has a hydraulic maintained, valve adjustment every 2,000 hours, oil every 250 hours, greased every 1000 hours, clean screen, tight chain and runs and ready to getkicker to work. 1that owner all machine Call off for more pictures and video!

of a 4 cylinder Mercedes power

Contact: MARK Email: Has Mark@lumbermensco.com unit. a 4’ chain saw that kicks Phone: 888-401-6367 EXT 708 OR 702-875-2703

Lumbermens™  since 1986

❘

Item ID: 12383

Cat C9 325HP Tier 4i Engine. PT Hydraulic Clutch. 1393

Hours. Excellent Condition! Original Owner! All service capacity!. Item ID 13421. Sam x702 records since brand new!

Contact: TED

well built processor. Item ID 13820.

‘05 Gehl CTL 70

Item ID: 13920 Contact: Austin M20R 2015 Morbark Ph: (888) 401-6367 x703 Forestry Track Chipper

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004Cat Bandit BeastXW Model 4680 D6T Dozer 3412 Caterpillar Diesel engine Item ID: 27832

2007 Cat D6T HP. XW dozer, approx 3,538Mill hours, in hours will go with 850 5300 hrs.

BARKO

Email:Barko Teds@lumbermensco.com 1994 160B - Electric Phone: 888-401-6367 EXT 701

or (801) knuckleboom, 30'319-9351 boom, 75hp

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

John Deere 843K Wheeled Feller Buncher

kohing head. head works great. Item ID 13185. x702 ItemSam ID: 35072

1999 Barko 160D new engine with 2014 John Deere 843K 34x26 -tires 70-80% runs as should low hour, JD 22B head, approx 3825 hours, excellent condition,

1 owner. Owner operator1500 machine.hours. Call for more pictures! approximately Hour

Contact: MARK meter dont work. The last 2 owners Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

JD 640E Cable Skidder

CUMMINS continuous grapple. Item ID: 31773 Runs Great!. Item ID 13740. Samup so $16k in motor over haul, transmission had gears hanging

John Deere went through it go through $24k bill, after that put a

new radiator in it, new oil cooler, and a pump. all of that within x702 550 hrs, last winter had front diff rebuilt and the cradle was warm

BELL

so it got replaced as well. Tires are 23.1x26 3 at 85% or better one is brand new with about 10 hrs on it, new windows, had center pins replaced about 5 years ago most hoses are new, cylinders have been rebuilt in last 5 years excellent machine! Call for more pictures and video!

up. WINCH DOES NOT WORK, enclosed cab cold A.C. good heat, new complete tracks and undercarriage (all cat parts) good condition. Just New cutting edge, everything is infinished great working 10 condition except for the winch. Call for more pictures!

1990 Bell Super T - This Bell has

Contact: MARK Email: Mark@lumbermensco.com Remote control. Big production Phone: 888-401-6367 EXT 708 OR 702-875-2703

Email: Mark@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 708 OR 702-875-2703

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

aContact: brandMARK new Duetz engine. Lever

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Item ID:Tree 12270

that Started it All!

SOUTHWEST FOREST PRODUCTS EXPO Transcraft Trailer 2008 Cat Skid Steer 289C Fri, 25 August Item - Sat,ID:2645261 August Item ID: 73486

Hot Springs, Arkansas 2006 Transcraft 53 feet trailer. 2 replacement tires go www.arkloggers.com with it. Solid deck everything works as it should. Call for

Dual Arch Grapple,. Tires- 30.5x32; 30% front, 40% rear. Power train rebuilt, overhauled Cummins 5.9 engine.

Original Owner! All maintenance records since brand new! 2 Available!! 6098 hours.

Contact: TED Email: SinceTeds@lumbermensco.com 1986, Lumbermens has Phone: 888-401-6367 EXT 701 a monthly published or (801) 319-9351circular

72ND Contact: ANNUAL Contact: TED TED GREAT LAKES Email: Teds@lumbermensco.com LOGGING Email: Teds@lumbermensco.com & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 701 Phone: 888-401-6367 EXT 701 Thurs, 7 Sept - Sat, 9 Sept or (801) 319-9351 or (801) 319-9351 Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 704 Prentice 210Eext. Loader morris@lumbermens.co

Item ID: 79682

MARKETING DIRECTOR

Joystick controls 5.9 Cummins. Has saw hookups. Just spent over $20k John in repairs.Williams Brand new hydraulic pump, new turntable bearing, recored the radiator, new rear (888) 401-6367 701 main seal , resealed the collector, ext. resealed all 3 main boom cylinders. Located in North west Arkansas. j@lumbermens.co Mounted on pintle hitch trailer. 8964 hours.

DESIGN DIRECTOR

Contact: TED Donna Heninger Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat,384 16 Knuckle Sept Prentice

'18 Diamond Z Track Mounted Horizontal Grinder

Lexington, Kentucky Boom & Delimber http://www.kfia.org/ Item ID: 49732 Model DZH4000TK. Cat C-18 @ 765 HP. ONLY 2083 KentuckyWoodExpo.aspx Item ID: 373

Hours!!! In Excellent condition!!! Excellent Condition! All service records since brand new!

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

2018 John Deere 3754D LOGGER. Logging Processor

with been Waratahrebuilt, HTH625C Harvester ONLY in 3231 has it has aHead. 24foot hours!!! Excellent Condition!

feed deck 20 foot out feed deck Contact: TED

with inch wheels, and all the Email:44 Teds@lumbermensco.com Phone: 888-401-6367 EXT 701

or (801) 319-9351 bells and whistles, its a production

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

John Deere 3754D

Danckaert Band Resaw - Roughly Item ID: 45747 10 hours on this machine since it

Prentice 384 knuckle boom loader with delimber, approx 8k hours, completely dry, straight, tight machine, everything is in good working condition, AC is good and cold, backup machine, truly woods ready. Call for more pictures!

THE PAUL BUNYAN SHOW Fri,Contact: 6 Oct - Sun, 8 Oct MARK

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

Cambridge, Ohio www.ohioforest.org

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

S & Timberjack W 125 Band610C Mill Forwarder with Item ID: 50391 Caterpillar generator - Low hours

1999 Timberjack 610C Forwarder, tight, dry, 28L tires 2 at ap-

proxthe 90% 2mill, at approx 40% good working machine CallSet for on electronic computer more pictures!

works,1 1/2" or 2" band, 22ft. track Contact: MARK Email: Mark@lumbermensco.com

Cat 3406 140KWEXT Genset, 12,400 Phone: 888-401-6367 708 OR 702-875-2703 hours ready to run. Item ID 13434.

** INFO LINK**

Sam x702

Innovative

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal Clean-Burn Design

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Menominee Saw ..................... 29 Manufacturing a full line of biomass ﬁred Metal Bell's Machining combustion systems..................... backed with ﬁ27 fty years of Detector's Inc. .............. 30 innovative clean-burn design. Diverse every Brute Force Mfg. ..................... 31 inMidwest Sharpening.............. 26 way with multi-fuel blending capability. Hurst Buckstokers Equipment (AIM) ........ 36 Mor bark ..................................... 9 utilize hundreds of common and

abundant solid biomass fuels. Corley Mfg .............................. 32 Multitek ................................... 12 Large or small scale, project Piper's CRD Metalworks .................... 25 with management is eased the Saw Shop.................... 13 impressively short installation time CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 required with prefabricated CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 modular components. Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Rotary Dryers Hurst Boiler ............................. 14 Sand Dryers Grain Dryers Iron Bull ................................... 21 Lumber Kilns Kilgore Saw ............................. 22 Cement Kilns Brick Kilns Lignomat ................................. 24

The Paul Bunyan Show ......... 39

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Carriage line it includes carriage

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net YEARS 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

B U Y S

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

more pictures.

BANDMILLS & HEADSAWS

H O T

'95 Timberjack 450 Dual Arch Skidder

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

B U Y S

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Item ID: 65695 Email info@empirehyd.com 72-73 Timberjack 207, everything in good working condition, Hercules winch, great 18.4 tires, 453 Detroit, been pulling/ready to work Call for more pictures!

Timberjack 207 Cable Skidder

H O T

“Precision Under Pressure”

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

08’ John Deere 437C $46,500

‘16 Halverson H140 Item ID: 53095 Skidsteer (DEMO) Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-909632 EXT 703 Phone: 888-401-6367 Contact: 931-797-8029 J Williams

‘93 Barko 2015 Cat180B 545D

Item ID: 45196 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 931-797-8029

Ph: (888) 401-6367 x701

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703 931-797-8029

Price $45,000

Item ID: 80318

Item ID: 29966

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

L O G G I N G

off onto a conveyor. This is a very

Grapple

Item ID: 35810 Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph:440B (888) 401-6367 x703 JD Cable Skidder Item ID: 47188

with 1700WES hours, in very good Contact:

Email: Wes@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 710 OR 260-452-6055 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. x702 Morbark 20Sam Chipharvester Item ID: 38035 FIREWOOD PROCESSORS

Contact: MARK 2010 Shop Built Wood Processor Email: Mark@lumbermensco.com -Phone: It has a 353 Detroit 888-401-6367diesel, EXT 70840 or 702-875-2703 inch insert tooth circle saw, 30 foot  Issue 364 388

Kubota KH191 w/ Hahn SG 140 Tree Processor Item ID: 63798

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

650J Log LGP Best ValueJD Portable Splitter Item ID: 17326 - Small manufacturer in PA has

well built processor. Item ID 13820.

2009 Valmet 840.4

Sam x702 Item ID: 79249

Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 640H Cable Skidder

Sam x702 Item ID: 6169

Contact: TED Email:the Teds@lumbermensco.com made best valued log splitter. Phone: 888-401-6367 EXT 701 or (801) 319-9351 Handles logs up to 32”. Uses

LOGGING Contact: MARKEQUIPMENT Email: Mark@lumbermensco.com BANDITEXT 708 Phone: 888-401-6367 or 702-875-2703 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with 848L a 10’ 2015 John Deere

Itema ID: 83128 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

'95 Timberjack 450 DPG ‘95 John Deere C6 Dual Arch Skidder TreeItem Farmer ID: 12270

Item ID: 13920 Contact: TED Email: Teds@lumbermensco.com Contact: Austin EXT 701 Phone: 888-401-6367 Ph: (888) or (801) 319-9351 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 518

grapple, 5,000 hours. Itemoriginal ID: 28404

(excellent condition.). Item ID Contact: AUSTIN Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 1995 Barko 775 B Feller Buncher 931-797-8029 - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Cat 527 Grapple Dozer

Item ID:The 39840 meter dont work. last 2 owners Contact: MARK have only used it to load trucks or Email: Mark@lumbermensco.com as a backup as needed. Phone: 888-401-6367 EXTHas 708a CTR orgrapple 702-875-2703 delimber, has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

2012 Barko 920 3412 Forestry Caterpillar Diesel engine Mulcher

Runs Great!. Item ID 13740. Sam

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 931-797-8029 Remote control. Big production

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny

2004 Bandit Beast Model 4680 Item ID:hrs. 47228 with 850 HP. 5300 Mill in

 List  seLL  exchange  buy  save

x702 Barko

595Ml Tracked

Item BELL ID: 43774

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 540B Item ID: 0908

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 8834

2005 Valmet Forwarder Woods840.2 Publishing Item ID: 66330

ADVERTISING SALES

Contact: MARK Morris Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708704 morris@lumbermens.co or 702-875-2703

MARKETING DIRECTOR

Item ID: 2476 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact:-SAM

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Sam@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 702 www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

2007 Cat 517

Item ID: 60554 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma,John NorthDeere Carolina 540D www.midatlantic-logging-biomass Item ID: 5613 expo.com/

Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 702 931-797-8029 Fri, 15 Sept - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS 2009 2384 Prentice Sam Wall Knuckleboom Loader (888) 401-6367 ext. 702

83’ John Deere 740A

Contact: MARK Austin Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708703 austin@lumbermens.co or 702-875-2703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Risley Rolly 3 to: Send address changes Item ID: 2390 Lumberman's Exchange P.O. Box 1916 Contact: WES Columbia, TN 38402 Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 The Lumberman's OR 260-452-6055 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Timberjack 230 Cable Skidder and writers, the Lumberman's Item ID: 51788 Exchange, its principles and associates, are not held liable for Contact: TED errorsTeds@lumbermensco.com or omissions. Reproduction, Email: Phone: 888-401-6367 EXT 701with in whole or part, is prohibited or (801) 319-9351 out written consent. ©2017 Woods Publishing

Item ID: 95074

Cambridge, Ohio www.ohioforest.org

2017 Tigercat 630E Item ID: 84473

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

'96 CAT 515 Log Skidder

BANDMILLS & HEADSAWS Item ID: 7534

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: Phone: 702 has been 888-401-6367 rebuilt, it has a EXT 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

John Deere 540B

is supported on ID: both6075 sides. This Item

isContact: an extremely accurate machine JOE Email: in ve1yJoe@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 709

a minute OR 801-362-2170 feet also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 2003 Tigercat 250 Log Loader Item ID: 46268

CARRIAGES & DRIVES

Contact: WALKER 2010 Cardinal HD Carriage Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

720E Tigercat Feller Buncher Serco 170A Self Propelled Loader Buck Equipment (AIM) ........ 36 Mor bark ..................................... 9

Item ID: 44546 Corley Mfg .............................. 32 Contact: MARK Email: Mark@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 708 CW Mill-ArmorHog or 702-875-2703 .............. 17

Item ID: 57111 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14 Cat D5H LGP Item ID: 64808 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Controls437D ..... 10 2013Industrial John Deere Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom and 36" top saw Logsaw Max 7000 Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID: 83019 sam@lumbermens.co

Caterpillar

John Deere 437D Log Loader

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

Email: Fery@lumbermensco.com Item (888) ID: JW-909632 Phone: 401-6367 ext.705 or (801) 699-8784

Contact: J Williams Ph: (888) 401-6367 x701

JD 437D loader Item ID: 35922

Item ID: 59500

Item ID: 37092

L O G G I N G

‘16 Halverson H140 Item ID: 52045 Skidsteer (DEMO) Contact: FERY

Clark 667

Tree Farmer Grapple - Cable Skidder Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Peterson Chipper

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Gehl R220 Skid Loader Item ID: 28551

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 John Deere 550G Dozer Item ID: 85744

Contact: MARKin very good with 1700 hours, Email: Mark@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXT 708high or 702-875-2703 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702 Hood 28000 Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 388

314 CTR Delimber Item ID: 71870

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. x703Skidder Dozer KMC Austin 210 Cable Best ValueItem Portable Log Splitter ID: 54571

-Contact: Small manufacturer in PA has MARK Email: Mark@lumbermensco.com made the888-401-6367 best valuedEXT log708 splitter. Phone: or 702-875-2703 Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Itema ID: 10075 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

John Deere 650 G LGP Dozer

Sam x702 Item ID: 44852

Firewood Processor - This is Contact: TED

Email: Teds@lumbermensco.com

aPhone: Chomper Model 16 PDA 888-401-6367 EXT 701

or (801) 319-9351

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 640

Sam x702 Item ID: 92152

LOGGING EQUIPMENT Contact: JOE Email: Joe@lumbermensco.com BANDITEXT 709 Phone: 888-401-6367 OR1900 801-362-2170 1999 Bandit Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

John Deere 648G3 Dual 3412 Caterpillar engine GrappleDiesel Skidder with 850 HP. 5300 Mill in Item ID:hrs. 74548

good condition. Just finished 10 Contact: FERY Email: Fery@lumbermensco.com

Acre clearing job, ready to work! Phone: (888) 401-6367 ext.705 (801) 699-8784 Remoteor control. Big production

 List  seLL  exchange  buy  save

2054 John Deere

‘93Processor BarkoLog 180B Loader

Item ID: 73244 Item ID: 14077 Contact: Austin Contact: FERY Email: Fery@lumbermensco.com Ph: (888) 401-6367 x703 Phone: (888) 401-6367 ext.705 or (801) 699-8784

‘95 John Deere C6 KMC 2400 Grapple/winch ID: 83802 TreeItem Farmer

Contact: TED ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 Contact: Austin EXT 701 or (801) 319-9351

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

'70 Allis Chalmers HD6 Dozer

grapple, 5,000 hours. Itemoriginal ID: 60357

(excellent condition.). Item ID Contact: TED

Email: Teds@lumbermensco.com

13238. x700 Phone:Chris 888-401-6367 EXT 701

or (801) 319-9351

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 Cable hours.skidder Hour John Deere 540G3

Item ID:The 15324 meter dont work. last 2 owners Contact: MARK have only used it to load trucks or Email: Mark@lumbermensco.com as a backup as needed. Phone: 888-401-6367 EXTHas 708a CTR orgrapple 702-875-2703 delimber, has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H Item BELL ID: 85729

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Tigercat T240B Item ID: 4266

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 540G3 Item ID: 92115

Contact: AUSTIN Email: Fery@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: (888) 401-6367 ext.705 Phone: 888-401-6367 EXT 703 or (801) 699-8784 www.arkloggers.com 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Tigercat 630Publishing C Dual Arch

Item ID: 10836

ADVERTISING SALES

Contact: TED Morris Woods Email: Teds@lumbermensco.com (888) 401-6367EXT ext.701 704 Phone: 888-401-6367 or (801) 319-9351 morris@lumbermens.co

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina BARKO 495ML Timbco 425B www.midatlantic-logging-biomass Item ID: 33905 Item ID: 74779 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall 1991 Timberjack 450B (888) 401-6367 ext. 702 Item ID: 1826 sam@lumbermens.co

Valmet Forwarder

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co 931-797-8029

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

John Deere 650G to: Send address changes Item ID: 30113 Lumberman's Exchange Contact: MARK P.O. Box 1916 Email: Mark@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 708 or 702-875-2703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack Exchange, its principles380C and Item ID: 72259 associates, are not held liable for errors or omissions. Contact: WALKERReproduction, in whole or part, is prohibited with Email: Walker@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 707 ©2017 Woods Publishing

expo.com/

Contact: JOE Email: Joe@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 709 Sept OR 801-362-2170 Fri, 15 - Sat, 16 Sept

Item ID: 42041

Cambridge, Ohio www.ohioforest.org

Timbco 445 EXL Item ID: 87930

** INFO LINK**

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

1988 John Deere 540D

BANDMILLS & HEADSAWS Item ID: 727

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 been rebuilt, 931-797-8029 has it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Log Loader/ Excavator 225 LC

is supported onID: both sides. This Item 51519

isContact: an extremely accurate machine FERY Email: in ve1yFery@lumbermensco.com good condition, Cuts 130 Phone: (888) 401-6367 ext.705

or feet a minute(801) also699-8784 has CLT presses.

2008 Barko 495 ML

Sam x702 Item ID: 7648

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

CW Mill-ArmorHog .............. 17

Cat 525C Grapple Skidder Mor bark ..................................... 9 Item ID: 47830 Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 708 13 or 702-875-2703 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. Vermeer SC372 Stump Grinder14

Thomas Industrial Controls..... 10

Excavator 330Lx Link........ Belt36 Buck Equipment (AIM) Item ID: 70897 Corley Mfg .............................. 32

Contact: FERY Email: CRDFery@lumbermensco.com Metalworks .................... 25 Phone: (888) 401-6367 ext.705 or (801) 699-8784

Item ID: 15150 Iron Bull ................................... 21 Contact: MARK Email: Mark@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 708 ................................. 24 Lignomat or 702-875-2703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

'87 CAT 518 Cable Skidder

with onboard log turners, carriage drive, hyd pac for carriage,

48"Cat bottom and 36" top saw 508saw Cable Skidder Item ID: 84481

STACKING RAC

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

John Deere 648E

Item ID:&21141 Union Grove Saw Knife.. 2, 37

Item ID: 6603

Contact: TED Universal Refiner ................... 23 Email: Teds@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711

Phone: 888-401-6367 EXT 701

WoodMizer l or................................ (801) 319-9351

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

MAILING ADDRESS

John Deere Tractor

Item ID: 74808 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August - Sat, 26 August Contact: FERY

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

CAT 518 (’88) Item ID: 90569

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

JD 640 (’80)

Tigercat 845

Item ID: 93988

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 8139

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Cat D4C LGP Forestry Dozer

Item ID: 99373 ‘16 Halverson H140 Contact: MARK Skidsteer (DEMO) Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Item ID: JW-909632 or 702-875-2703 Contact: J Williams Ph: (888) 401-6367 x701

Timberpro 620 Item ID: 79674

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

JD 540A (‘76) Item ID: 3526

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650K XLT

Item ID: 480 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

210E Item IDPrentice 13644. Sam x702 Item ID: 8256 FIREWOOD PROCESSORS

Contact: JOE 2010 Shop Built Wood Processor Email: Joe@lumbermensco.com 888-401-6367 EXT40709 -Phone: It has a 353 Detroit diesel, 801-362-2170 inch insert tooth circle saw, 30 foot  Issue 364 388

John Deere 650J XLT Item ID: 5109

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl 931-797-8029 CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 BELL TRACKED (1993) Item ID: 54265 Best Value Portable Log Splitter JOE -Contact: Small manufacturer in PA has Email: Joe@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 709 801-362-2170 Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD processor 460 (1997) homemade with a 10’

Item ID: 1095 log deck. Has a hydraulic grapple, Contact: JOE chain kicker that all runs off Email:and Joe@lumbermensco.com Phone: 888-401-6367 709 of a 4 cylinder MercedesEXT power 801-362-2170 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

VALMET 840.2 FORWARDER

Sam x702 Item ID: 9770 Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new forPrentice $32,500. Item2190 ID 13865. Item ID: 28889 Sam x702

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 931-797-8029 1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Diesel engine JohnCaterpillar Deere 548G2 Grapple Skidder Item ID:hrs. 34791 with 850 HP. 5300 Mill in Contact: MARK good condition. Just finished 10 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXTto 708 Acre clearing job, ready work! or 702-875-2703 Remote control. Big production

 List  seLL  exchange  buy  save

CAT 525C ‘93 Barko 180B Item ID: 4091 Item ID: 14077

Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John C6 Excavator w/RyanDeere DS 28 Felling Head ID: 76226 TreeItem Farmer

Contact: TED ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 Contact: Austin EXT 701 or (801) 319-9351

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Prentice 180

grapple, 5,000 hours. Itemoriginal ID: 7822

(excellent condition.). Item ID Contact: AUSTIN Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours. Morbark 30XLHour Item ID: 13937 meter dont work. The last 2 owners Contact: MARK have only used it to load trucks or Email: Mark@lumbermensco.com as a backup as needed. Phone: 888-401-6367 EXTHas 708 a CTR orgrapple 702-875-2703 delimber, has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item BELL ID: 58544

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 548D Item ID: 64196

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

‘14 Barko 595

Item ID: 14185 EXPO SOUTHWEST FOREST PRODUCTS Contact: MARK Fri, 25 August Sat, 26 August Contact: AUSTIN Email: Mark@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 708 Phone: 888-401-6367 EXT 703 or 702-875-2703 www.arkloggers.com 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER John Deere 548G3 Grapple Skidder Woods Publishing Item ID: 61325

ADVERTISING SALES

Contact: MARK Morris Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext.708 704 Phone: 888-401-6367 702-875-2703 morris@lumbermens.co

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina JD 337E (2016) www.midatlantic-logging-biomass Item ID: 34479 expo.com/

John Deere 650H Item ID: 50512

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 709 931-797-8029 Sept801-362-2170 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall '93(888) John Deere 401-6367 ext.548E 702 Item ID: 14184 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER Prentice Knuckle Boom Loader Send210E address changes to:

Lumberman's Exchange Item ID: 56625 P.O. Box 1916 Contact: MARK Columbia, TN 38402 Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 702-875-2703 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers John the Deere 540G3 and writers, Lumberman's Exchange,Item its principles and ID: 41685 associates, are not held liable for Contact: errors orFERY omissions. Reproduction, Email: Fery@lumbermensco.com in whole or 401-6367 part, is prohibited with Phone: (888) ext.705 out written consent. or (801) 699-8784

Prentice 180 Item ID: 7822

Cambridge, Ohio www.ohioforest.org

Tigercat 615C Item ID: 17058

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

07 Prentice 950B

Item ID: 5368 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

09’ John Deere 700J

is supported onID: both sides. This Item 48601

isContact: an extremely accurate machine AUSTIN Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 a minute 931-797-8029 feet also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

96’ Hydro ax 611E

Sam x702 Item ID: 4654

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item.............................. ID: 52342 Corley Mfg 32 Contact: WALKER CRD Walker@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 707 CW Mill-ArmorHog .............. 17

Multitek ................................... 12 Contact: JOE Email: Joe@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 709 OR............................ 801-362-2170 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item ID: 20725 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

550KControls (2015)..... 10 ThomasJD Industrial Item ID: 92495 Union Grove Saw & Knife.. 2, 37 Contact: JOE Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 WoodMizer ................................ l OR 801-362-2170

2011 437D John Deere TimberPro 735B Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Knuckle Boom Loader Item ID: 52609

Cat 517 Hurst Boiler ............................. 14

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Franklin Q70 Item ID: 5458

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘15 John Deere 648L Item ID: 14237

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 www.BakerProducts.net or 702-875-2703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR

'94 John Deere 548E

Item ID: 14238

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 648 G3 Grapple Skidder

Komatsu PC290LC Loader

Item ID: 4572

Item ID: 94744

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Morbark 40/36 Whole Tree Chipper on Tracks Item ID: 35082

L O G G I N G

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Prentice 2432 (’09) Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 14033

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 848 G Grapple Skidder Item ID: 85843

with 1700TED hours, in very good Contact:

Email: Teds@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 701 or (801) 319-9351

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Treefarmer C5D Item ID 13644. Sam x702Skidder Item ID: 17115 FIREWOOD PROCESSORS

Contact: TED Wood Processor 2010 Shop Built Email: Teds@lumbermensco.com 888-401-6367 EXT40701 -Phone: It has a 353 Detroit diesel, or (801) 319-9351 inch insert tooth circle saw, 30 foot  Issue 364 388

‘16 Halverson H140 Item ID: 11726 Skidsteer (DEMO) Contact: TED Email: Teds@lumbermensco.com Item 888-401-6367 ID: JW-909632 Phone: EXT 701 or (801) 319-9351

JD 848H (‘08) Item ID: 8810

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 CTL 70 ‘05 Gehl 801-362-2170

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Prentice

210 E

Franklin 155B Forwarder Item ID: 10700

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘13 KMC 2500 Track Skidder

Best ValueItem Portable Log Splitter ID: 98009

well built processor. Item ID 13820. Timberjack 450 C Cable Skidder Sam x702 Item ID: 5077 Firewood Processor - This is Contact: TED

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2011 Cat 525C

log deck. Item Has a ID: hydraulic 26688 grapple,

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

CAT 140G grapple, 5,000 original hours. Item ID: 93592 (excellent condition.). Item ID Phone: (888) 401-6367 ext.705

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

Contact: Item ID:AUSTIN 13920 Email: Austin@lumbermensco.com Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

Contact: FERY

Phone: 888-401-6367 EXT 701 orfirewood (801) 319-9351 automatice processor

but electronic option is available.

13HP Honda motor. Manual start

‘95 John HydroDeere Ax 411 C6 Item ID: 98954 Tree Farmer

13238. Chris x700 Email: Fery@lumbermensco.com

Teds@lumbermensco.com aEmail: Chomper Model 16 PDA

Handles logs up to 32”. Uses

Email: Teds@lumbermensco.com made the best valued EXT log 701 splitter. Phone: 888-401-6367 or (801) 319-9351

931-797-8029

BARKO

LOGGING EQUIPMENT Contact: WALKER Email: Walker@lumbermensco.com BANDIT Phone: 888-401-6367 707 1999 Bandit 1900 TrackedEXT Disc

-Contact: Small manufacturer in PA has TED

Item ID: 14207

Item ID: 14077 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367x703 EXT 703

capacity!. Item ID 13421. Sam x702

off onto a conveyor. This is a very

new for $32,500. Item ID 13865. 1994 Timberjack 240 Item ID:74044 Sam x702

96’Barko John Deere 643D ‘93 180B

Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘00 Timberjack 1110

Treefarmer C7T GM Grapple/Winch Skidder

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

'04 John Deere 700H 3412 Caterpillar Diesel engine

Item ID: 14187 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

1995 Barko 775 Feller Buncher or (801)B699-8784

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

John Deere 648G3The Grapple meter dont work. last 2Skidder owners Item ID: 51014 have only used it to load trucks or Contact: MARK

Email: Mark@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 708

702-875-2703 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Ponsse Bear 6BELL Wheel Proccessor

Item ID: 18122 1990 Bell Super T - This Bell has Contact: MARK

aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708

702-875-2703 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Timberjack 240D Item ID: 40272

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 84253

BarkoPublishing 495B Woods Item ID: 44764

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

SOUTHWEST FOREST PRODUCTS EXPO Contact:-MARK Fri, 25 August Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, Carolina 380A ‘89 North Timberjack www.midatlantic-logging-biomass Item ID: 14039 expo.com/

John Deere 648G3 Item ID: 58995

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY Sept931-797-8029 931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 Tigercat 604 Cable Skidder sam@lumbermens.co Item ID: 6552 Austin Woods Contact: MARK Email:(888) Mark@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 708 austin@lumbermens.co 702-875-2703

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Send address changes to:

1998 Timberjack 360 Lumberman's Exchange Item ID: 8121

P.O. Box 1916 Columbia, TN 38402 Contact: WALKER

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXTis707 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by Bar advertisers '97 Hydrosubmitted AX-411 EX Saw Head and writers, theID: Lumberman's Item 98754 Exchange, its principles and associates,SAM are not held liable for Contact: errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole888-401-6367 or part, is prohibited with Phone: EXT 702 out written consent. ©2017 Woods Publishing

Timberjack 360C Grapple Skidder Item ID: 63219

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher Item ID: 64107

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

TimberPro 725B

Item ID: BANDMILLS & 20976 HEADSAWS

Danckaert Band Resaw - Roughly Contact: JOE Email: Joe@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 709

been rebuilt, OR 801-362-2170 has it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Cat D6M Dozer

is supported onID: both sides. This Item 71062

is an extremely accurate machine Contact: MARK

Email: in ve1yMark@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 708

a minute 702-875-2703 feet also has CLT presses.

Sam x702 Item ID: 6051

CARRIAGES & DRIVES

Contact: JOE

Email: Joe@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 709

OR 801-362-2170 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Mid 90’s Husky Brute 335XL John Deere 1710D(AIM) Forwarder Buck Equipment 9 Item ID: 94242 ........ 36 Morbark ..................................... Item ID: 14088

Corley Mfg .............................. 32 Contact: MARK Email: Mark@lumbermensco.com CRD Metalworks .................... Phone: 888-401-6367 EXT 70825 CW Mill-ArmorHog 702-875-2703 .............. 17

Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 703 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

2011 CAT 525C Hurst Boiler ............................. 14

Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Controls ..... 10 98’Industrial Prentice 410E Item ID: 14206 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom 36" top saw 648saw G and Skidder Item ID: 76963

STACKING RAC

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

Item ID: 25974

Contact: AUSTIN Email: Mark@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 708 Phone: 888-401-6367 EXT 703 www.arkloggers.com 702-875-2703 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Log Loader

Timbco 425Exl

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘80 John Deere 550 Item ID: 14037

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

'13 John Deere 548G III Item ID: 8789

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 525D

Item ID: 9555H140 ‘16 Halverson Contact: JOE Skidsteer (DEMO) Email: Joe@lumbermensco.com Phone:ID: 888-401-6367 EXT 709 Item JW-909632 OR 801-362-2170 Contact: J Williams Ph: (888) 401-6367 x701

‘97 Timbco 425D Item ID: 13950

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

'07 John Deere 848H Grapple Skidder Item ID: 6566

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888)Deere 401-6367 x703 John Logger Item ID: 82959

with 1700MARK hours, in very good Contact:

Email: Mark@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 708 702-875-2703

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

‘14IDB66TD Rotochopper Item 13644. Sam x702 Item ID: 13838 FIREWOOD PROCESSORS

Contact: SAM Wood Processor 2010 Shop Built Email: Sam@lumbermensco.com - It has a 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 702 inch insert tooth circle saw, 30 foot  Issue 364 388

‘80 John Deere 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Prentice 384 Knuckleboom Loader Item ID: 82959 Best Value Portable Log Splitter

well built processor. Item ID 13820.

648 E Cable Skidder

Sam x702 Item ID: 87791 Firewood Processor - This is Contact: TED

Teds@lumbermensco.com aEmail: Chomper Model 16 PDA

Phone: 888-401-6367 EXT 701 orfirewood (801) 319-9351 automatice processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Timbco 425D Sam x702 Item ID: 98053

Handles logs up to 32”. Uses

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

-Contact: Small manufacturer in PA has TED

Email: Teds@lumbermensco.com made the best valued EXT log 701 splitter. Phone: 888-401-6367 or (801) 319-9351

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deerewith 85Da 10’ homemade

Item ID: 48169 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

John Deere 3412 Caterpillar Diesel700H engine

Item ID: 1324 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

'94 CAT 518C Cable Skidder ‘93 Barko 180B Item ID: 7698 Item ID: 14077

Contact:SAM Austin Contact: Email: Sam@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

‘95 Deere C6 ‘05John Timberjack 608B Item ID: 13898 Tree Farmer

Contact: Item ID:SAM 13920 Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Timberjack 1270C Itemoriginal ID: 8676 grapple, 5,000 hours.

(excellent condition.). Item ID Contact: JOE Email: Joe@lumbermensco.com 13238. x700 Phone:Chris 888-401-6367 EXT 709

OR 801-362-2170 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500III hours. Hour JD 648G (’03) Item ID: 36067 meter dont work. The last 2 owners have onlyJOE used it to load trucks or Contact: Email: Joe@lumbermensco.com

as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 709

OR 801-362-2170 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Franklin 2005 Q70 Item ID: 5579

BELL

Contact: SAM T - This Bell has 1990 Bell Super Email: Sam@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

‘97 Timberjack 240D Item ID: 13917

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14218

Woods Publishing Item ID: 99807

ADVERTISING SALES

Contact: SAM Morris Woods Email:(888) Sam@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 702 morris@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Timber Harvester Item ID: 29211

MID-ATLANTIC

Selma, North Carolina 2004 Timbco 445EXL www.midatlantic-logging-biomass Item ID: 14170 expo.com/

LOGGING & MARK BIOMASS EXPO Contact: Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Contact: WALKER Austin Woods Email:(888) Walker@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 707 austin@lumbermens.co

MAILING ADDRESS

Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

D5H TSK

Item ID: 7098

Cambridge, Ohio www.ohioforest.org

Timbco 820D Item ID: 18370

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘04 Fabtek 344B

BANDMILLS & HEADSAWS Item ID: JW-093430

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

'97 CAT 525 Original Skidder pressure guides. Top Cable Casting wheel Item ID: 9901 is supported on both sides. This isContact: an extremely SAMaccurate machine Email: Sam@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 702 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours07’ ready to run. Item ID 13434. Tigercat 620C

Sam x702 Item ID: 14248

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

10’ Equipment John Deere 648H Buck (AIM) ........ 36 Item ID: 14210 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 931-797-8029 CW Mill-ArmorHog .............. 17

Midwest Sharpening.............. 26

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

16’ CAT 545D

Send address changes to: Item ID: 14211 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 The Lumberman's 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers 93’submitted Prentice 210 and writers, theID: Lumberman's Item 14216 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 703 in whole888-401-6367 or part, is prohibited with 931-797-8029 out written consent. ©2017 Woods Publishing

748G3 John Deere

Morbark ..................................... 9 Item ID: 2757 Multitek ................................... 12 Contact: FERY

Email: Fery@lumbermensco.com Piper's Saw Shop.................... 13 Phone: (888) 401-6367 ext.705

or (801)............................ 699-8784 Rotochopper 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 12’ John Deere 437D 14 Item ID: 14209 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

Thomas Industrial Controls..... 10 JD 643G Item ID: 80565 Union Grove Saw & Knife.. 2, 37

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Contact: JOE

Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

WoodMizer l OR................................ 801-362-2170

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" 12’ bottom sawDeere and 36" top saw John 843K Item ID: 14212

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

MARKETING DIRECTOR

Sam Wall 2016 Tigercat 604 E Cable (888) 401-6367 ext. Skidder 702 Item ID:55393 sam@lumbermens.co

Item ID: 14217

Contact:-AUSTIN Fri, 25 August Sat, 26 August Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 www.arkloggers.com 931-797-8029 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER '94 CAT 518 Grapple Winch

2011 John Deere 648H

07’ Tigercat 724E

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 380C Item ID: 410

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

90's Model Timberjack 240A Item ID: 14111

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘05 CAT TK560

PRENTICE 410EX Item ID: 3280

Item ID: 14004

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘11 Tigercat 845C

‘16 Halverson H140 Item ID: 13927 Skidsteer Contact: SAM (DEMO) Email: ID: Sam@lumbermensco.com Item JW-909632 Phone: 888-401-6367 Contact: J Williams EXT 702 Ph: (888) 401-6367 x701

01’ Ponsee Bison Forwarder Item ID: 14109

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Tigercat 604

‘93 John Deere 548E

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl 931-797-8029 CTL 70

Item ID: 7436

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph:John (888) 401-6367 x703 Deere 437E Item ID: 9508

with 1700JOE hours, in very good Contact:

Email: Joe@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 709 801-362-2170 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Ponsse Ergo Item ID 13644. Sam x702 Item ID: 7720 FIREWOOD PROCESSORS

Contact: MARK 2010 Shop Built Wood Processor Email: Mark@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40708 702-875-2703 inch insert tooth circle saw, 30 foot  Issue 364 388

Item ID: 14083

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 CAT 559C Item ID:Log 269Splitter Best Value Portable

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘89 CAT D4Hwith LGPa 10’ homemade processor

Item ID: 13999 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘94John Caterpillar ‘95 Deere320 C6 Item ID: 13936 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

on injection pump. always started

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘14 CAT 535C

Sam x702 Item ID: 13840

50% or better. 475 hp Cummins

adjustable to single two way. Great

702-875-2703

low hours. Control panel includes

Sam x702 Item ID: 13929

but electronic option is available. Has Log Lift. Uses 4-way wedge

Firewood Processor - This is Contact: SAM aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 automatice firewood processor

‘11 Tigercat 620D

LOGGING Contact: SAM EQUIPMENT Email: Sam@lumbermensco.com BANDIT Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

13HP Honda motor. Manual start

Item ID: 68516

Item ID: 14077 Contact: MARK Contact: Austin Email: Mark@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 708

2012 Cat D6K XL motor, Rotobec continuous Item ID: 14169 grapple, 5,000 original hours. Contact:condition.). AUSTIN Item ID (excellent Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13238. Chris x700 OR 931-797-8029 1995 Barko 775 B Feller Buncher

well built processor. Item ID 13820.

Email: Joe@lumbermensco.com made the best valued EXT log 709 splitter. Phone: 888-401-6367 801-362-2170 Handles logs up to 32”. Uses

-Contact: Small manufacturer in PA has JOE

Tigercat 234 Knuckle Boom Loader ‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

‘85 John Deere 440D 3412 Caterpillar Diesel engine

Item ID: 12453 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour JD 648G Grapple Skidder

Item ID:The 54867 meter dont work. last 2 owners have onlyTED used it to load trucks or Contact:

Email: Teds@lumbermensco.com as a backup as needed.EXT Has a CTR Phone: 888-401-6367 701

or (801) 319-9351 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 ‘05

Tigercat 230B

Item ID: 13911

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

‘04 JCB 441 Wheel Loader Item ID: 13888

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started OR 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

Woods Publishing Item ID: 14089

ADVERTISING SALES Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (888) 401-6367 ext. 704 OR 931-797-8029 morris@lumbermens.co

Item ID: 14070 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact:-AUSTIN

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

John Deere 437C Item ID: 1020

MID-ATLANTIC

‘09 John 650J XLT Selma, NorthDeere Carolina Item ID: 14091 www.midatlantic-logging-biomass expo.com/ Contact: AUSTIN

LOGGING &AUSTIN BIOMASS EXPO Contact: Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029 OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

(888) 401-6367 ext. 702 Item ID: 47648 sam@lumbermens.co

Contact: MARK Austin Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708703 or 702-875-2703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

'92 Send CAT 518C Cable Skidder address changes to: Item ID: 14107

Lumberman's Exchange

P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402 Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers ‘02 Jackson Shavings Mill and writers, theID: Lumberman's Item 13736 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 703 in whole888-401-6367 or part, is prohibited with out written ORconsent. 931-797-8029 ©2017 Woods Publishing

‘03 John Deere 748GIII Item ID: 13851

Cambridge, Ohio 210D Knuckleboom Loader on Truck www.ohioforest.org Item ID: 6694

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

‘80 John Deere 540B

BANDMILLS & 11345 HEADSAWS Item ID:

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

532 CAT Feller Buncher

is supported onID: both sides. This Item 14079

is an extremely accurate machine Contact: AUSTIN Email: in ve1y Austin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet a minute has CLT presses. OR also 931-797-8029 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

06’ Franklin Q80

Sam x702 Item ID: 14214

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 Carriages (Sawmill) - Cardinal OR 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

John Deere 548G3

Buck Equipment (AIM) ........ 36 Item ID: 985 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

‘98 611 Ex-Hydro Ax

Morbark ..................................... 9 Item ID: 13948 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CAT 235 BZ Hurst Boiler ............................. 14

Item ID: 1865 Iron Bull ................................... 21 Contact: TED Email: Teds@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 701 Lignomat or ................................. (801) 319-9351 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10

‘06 CAT 517

Item ID:&13869 Union Grove Saw Knife.. 2, 37 Contact:Refiner SAM ................... 23 Universal Email: Sam@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 702l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom Trailers saw andCustom 36" topLog saw Transport Pup Item ID: JW-538174

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 7021

Prentice 384 w/ Bucksaw & Delimber Item ID: 14213

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

MARKETING DIRECTOR

Sam Cable Wall Dozer CAT D4H TSK

Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 www.arkloggers.com OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER ‘08 John Deere 335C

‘95 Bell Ultra T

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TIMBERJACK 230A Item ID: 9450

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2004 CAT 517 Grapple Dozer Item ID: 70690

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Kubota SVL-95 2s

L O G G I N G

Item ID: 1025

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 JOHN401-6367 DEERE 700J Item ID: 2212

with 1700 JOE hours, in very good Contact:

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Timbco 425 Item ID: 5627

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703Tack Skidder '13 KMC 2500 Item ID: 14078 Best Value Portable Log Splitter

vans and produce 6 - 8 loads per

but electronic option is available.

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Barko 180B Item ID‘93 13644. Sam x702 Item ID: 14077 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT40703 -Phone: It has a 353 Detroit diesel, OR 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 388

Item ID: 14186

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 OR up 931-797-8029 Handles logs to 32”. Uses

day. Item ID 13882. Austin x703

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 709 801-362-2170 quality chips with patented ‘Cone’

drum design. Can easily load 42’

Phone: 888-401-6367 Item ID: JW-909632 EXT 703 OR 931-797-8029

'94 Barko 160 Knuckleboom

Item ID: 7060

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Bell Ultra C

‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Item ID: 14106

PRENTICE 2210

Item ID: 4861

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

'09 John Deere 753J Buncher

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘00 Timbco homemade processor 445D with a 10’

Item ID: 14096 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

off onto a conveyor. This is a very

2015 Cat Item 525D well built processor. ID 13820. Item ID: 14167 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

new for $32,500. Item Track ID 13865. ‘99 Case 850G Long Dozer Item ID: 13909 Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 OR1900 931-797-8029 1999 Bandit Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

Timberjack 230A 3412‘89 Caterpillar Diesel engine

Item ID: 13885 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Quadco 2900 Intermittent ‘93 Barko 180B Head Item ID: 32295

Item ID: 14077 Contact: MARK Contact: Austin Email: Mark@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 708

702-875-2703

2010 Tigercat 724E ‘95 John Deere C6 Item ID: 14247 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

TIMBERJACK 460D / 648G III motor, Rotobec continuous Item ID: 34900 grapple, 5,000 original hours. Contact: JOE (excellent condition.). Item ID Email: Joe@lumbermensco.com

Phone:Chris 888-401-6367 EXT 709 13238. x700

OR 801-362-2170

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500Grapple hours. Skidder Hour John Deere 548G3 Item ID: 43042 meter dont work. The last 2 owners Contact: have onlyMARK used it to load trucks or Email: Mark@lumbermensco.com

as a backup as needed.EXT Has a CTR Phone: 888-401-6367 708

702-875-2703

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT 928G BELL

Item ID: 6056

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Item ID: 49890

Contact: WESThe Tree Email: Wes@lumbermensco.com that Started Phone: 888-401-6367 EXT 710 OR 260-452-6055

it All!

WoodsCircle Publishing Hurdle Saw

Item ID: 76007

ADVERTISING SALES

Contact: MARK Morris Woods Email:(888) Mark@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 708 morris@lumbermens.co or 702-875-2703

MARKETING DIRECTOR

Contact: MARK Hot Springs, Arkansas Email: Mark@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 708

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina Rogers 4 Headblock Circle Mill Cook 3238 HD Portable Sawmill www.midatlantic-logging-biomass MID-ATLANTIC Item ID: 90653

LOGGING & BIOMASS EXPO

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

John Williams (888) 401-6367 ext. 701 j@lumbermens.co Donna Heninger

EQUIPMENT REPS

Contact: Austin TED Woods Email:(888) Teds@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 701 austin@lumbermens.co or (801) 319-9351

MAILING ADDRESS

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

03’ Woodmizer LT-300 Operation Send address changes to: Item ID: 14171

Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Cutoff Trim Saw and writers, the ID: Lumberman's Item 5461 Exchange, its principles and associates, TED are not held liable for Contact: errors or omissions. Reproduction, Email: Teds@lumbermensco.com Phone: EXT 701 in whole888-401-6367 or part, is prohibited with out written orconsent. (801) 319-9351 ©2017 Woods Publishing

Contact: MARK Email: Mark@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 708 Septor-702-875-2703 Fri, 15 Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Go Fast Run Around System

Cambridge, Ohio www.ohioforest.org

42” Lumber Tiger Circle Item ID: 7894

Item ID: 84282

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

Danckaert Band Resaw - Roughly Contact: TED

Email: Teds@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 701

been rebuilt, or (801)it319-9351 has has a 24foot in

Cat 320C Logsides. Loader is supported on both This Item ID: 54026 is an extremely accurate machine Contact: MARK

in ve1yMark@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 708

feet also has CLT presses. a minute 702-875-2703 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

Fence Post Processing Operation

hours ready to run. Item ID 13434. Sam x702 Item ID: 42175

CARRIAGES & DRIVES

Contact: AUSTIN Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 Carriages (Sawmill) - Cardinal 931-797-8029

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Cornell Double End Trim........ Saw Buck Equipment (AIM) 36

Item ID: 6307 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

Real Tuff Bagger 9 Morbark ..................................... Item ID: 50281 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1996 Shavings Mill HurstJackson Boiler ............................. 14

Item ID: 1271 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat OR................................. 931-797-8029 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

S&W 125 High Production Thomas Industrial Controls.....Mill 10 Item ID: 8019 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

Mobile 48" bottom sawDimensions and 36" top saw Model 12 Circle Saw Item ID: 62784

STACKING RAC

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Woodmizer LT 3000 Operation Item ID: 10761

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Item ID: 23205

expo.com/

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Sam Wall Desjardin Shingle Mill (888) 401-6367 ext. 702 Item ID: 63655 sam@lumbermens.co

702-875-2703

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Fri, 25 August Item - Sat,ID:2649732 August

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

650 G&Dozer BANDMILLS HEADSAWS Item ID: 53699

L O G G I N G

Baker Double End Trim Saw

Boonville, New York www.starwebhosting.net/woodsmen/ Prentice 384 Knuckle Baker Notcher BoomPRODUCTS & DelimberEXPO SOUTHWEST FOREST Item ID: 49307

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Woodmizer LT300 Item ID: 7566

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Danchaert Band Resaw Item ID: 13876

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

'02 WoodMizer LT-40

Item ID: 11345 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 703 Contact: ORJ Williams 931-797-8029

‘93 BarkoScragg 180BMill Sanborn

Item ID: 14050 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367 x703 EXT 703

OR 931-797-8029

Ph: (888) 401-6367 x701

Precision Scragg

‘14 Hurdle 3-HD Block Sawmill

‘06 Woodmizer LT70 Electric

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

S A W M I L L

Item ID: 3607

Item ID: 13997

Item ID: 14084

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Woodmizer LT70 Bandmill Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Edmiston Complete Sawmill

Item ID: 14076

‘13 Woodmizer 4000 Sawmill Item ID: 14000

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

'16 LT40 13916. AustinSuper x703 Hydraulic

off onto a conveyor. This is a very

Corley Complete Sawmill well built processor. Item ID 13820. Item ID: 14035 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

‘05forWoodmizer new $32,500. Item ID LT300 13865.

Cornell EdgerC6 ‘95 John Deere Item ID: 33423 Tree Farmer Contact: TED

ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 EXT 701 Contact: Austin or (801) 319-9351 Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Hud-Son 360 Portable Sawmill

grapple, 5,000 hours. Itemoriginal ID: 8841

(excellent condition.). Item ID Contact: TED

Email: Chris Teds@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 701

(801) 319-9351 1995 Barkoor775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

quality chips with patented ‘Cone’

-Contact: Small manufacturer in PA has SAM Email: Sam@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 702 Handles logs up to 32”. Uses

Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703 OR 931-797-8029 1999 Bandit 1900 Tracked Disc

Meadows #3 Complete Operation approximately 1500 hours. Hour Item ID: 964 meter dont work. The last 2 owners Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTa703 as a backup as needed. Has CTR OR 931-797-8029 delimber, grapple has been rebuilt.

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Item ID: 98854

Contact: with 1700 MARK hours, in very good Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 condition. Easily produces high

702-875-2703

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Meadows #2 Deluxe

Item ID 13644. x702 ItemSam ID: 14250

FIREWOOD PROCESSORS

Contact: AUSTIN Email: Austin@lumbermensco.com 2010 Shop Built Wood Processor Phone: 888-401-6367 EXT 703 - It has a 353 diesel, 40 ORDetroit 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 388

Item ID: 9903 Best Value Portable Log Splitter

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Holtec Transcut homemade processor with a II 10’

Item ID: 70976 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 of a 4 cylinder Mercedes power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 14031

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

'02 Woodmizer LT-40 Super HD 3412 Caterpillar Diesel engine

Item ID: 14118 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Hurdle Circle Saw Item ID: 42289

BELL

Contact: MARK 1990 Bell Super T - This Bell has Email: Mark@lumbermensco.com 888-401-6367 EXTLever 708 aPhone: brand new Duetz engine. 702-875-2703 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

Item ID: 75143

Contact: MARK The Tree Email: Mark@lumbermensco.com that Started Phone: 888-401-6367 EXT 708 702-875-2703

it All!

Email: Austin@lumbermensco.com Springs, Arkansas EXT 703 Email: Austin@lumbermensco.com Hot Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 www.arkloggers.com OR 931-797-8029 OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER 359 Peterbilt Truck Woods Publishing Item ID: 7841

ADVERTISING SALES Contact: AUSTIN Email: Austin@lumbermensco.com Morris Woods Phone: 888-401-6367 EXT 703 (888) 401-6367 ext. 704 OR 931-797-8029 morris@lumbermens.co

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

#2 Sawmill Selma,Hurdle North Carolina Item ID: 8720 www.midatlantic-logging-biomass expo.com/ Contact: AUSTIN

Morbark Stac Trac

Item ID: 64060 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY OR 931-797-8029 931-797-8029

Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Chipper 2016 Barko Tree (888) 401-6367 ext. 702 Item ID: 16688 sam@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER Blockbuster 1412 Plus

Send address to: Item ID:changes 958 Lumberman's Exchange Contact: AUSTIN P.O. Box 1916 Email: Austin@lumbermensco.com TN 38402 Phone:Columbia, 888-401-6367 EXT 703

OR 931-797-8029

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Star Picker Truck andWestern writers, the Lumberman's ID: 60937 Exchange,Item its principles and associates, MARK are not held liable for Contact: errors or omissions. Reproduction, Email: Mark@lumbermensco.com in whole888-401-6367 or part, is prohibited Phone: EXT 708 with consent. out written or 702-875-2703 ©2017 Woods Publishing

Item ID: 347

Item ID: 83112

** INFO LINK**

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Item ID: 200 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 OR 931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel Quality 4 Head Trim Saw Item is supported on ID: both1559 sides. This

isContact: an extremely TED accurate machine Email: Teds@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 701 a minute or (801) 319-9351 feet also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item 13434. Dymax Skidsteer TreeIDCutter

Sam x702 Item ID: 96694

CARRIAGES & DRIVES

Contact: TED Email: Teds@lumbermensco.com

2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 701

or (801) 319-9351

Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Item ID: 86536

Morbark ..................................... 9 Item ID: 63148

Ford F650 48" bottom sawService and 36" topTruck saw Item ID: 92089

Corley Mfg .............................. 32 Contact: TED Email: Teds@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 701 CW Mill-ArmorHog or (801) 319-9351 .............. 17

Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 708 13 or 702-875-2703 Rotochopper ............................ 40

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14 Item ID: 16264 Iron Bull ................................... 21 Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 24 Lignomat or ................................. (801) 319-9351

Thomas Industrial Controls..... 10 Item ID: 33563 Union Grove Saw & Knife.. 2, 37 Contact: TED Email: Teds@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 701 or (801) 319-9351 WoodMizer ................................ l

Paccair Winch

Morbark 30/60 Chipper

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Morbark PS8 Post Peeler

1999 International 9100

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

STACKING RAC Log Splitter Item ID: 46454

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 www.BakerProducts.net or (801) 319-9351

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Contact: Austin TED Woods Email: Teds@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 701 or (801) 319-9351 austin@lumbermens.co

Ford Altec Bucket Truck

Cambridge, Ohio Peerless 45’ Walking Floor Trailer www.ohioforest.org

Frick #1 Jumbo Mill

S A W M I L L

Morbark 6036 Chipper

Woodmizer Twin Blade www.starwebhosting.net/woodsmen/ Wood-Mizer LT40 Diesel Edger Item ID: 13995 Item ID: 14191 SOUTHWEST FOREST PRODUCTS EXPO Contact:-AUSTIN Fri, 25 August Sat, 26 August Contact: AUSTIN

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Morbark Chipper

'93 KW 425 CAT

Item ID: 43812

Item ID:13342

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Samsung SL150 Wheel Loader

ShopBarko Built Wood Processor ‘93 180B Item ID: 14038

Contact: MARK Skidsteer (DEMO) Email: Mark@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 708 Contact: 702-875-2703 J Williams

Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367 x703 EXT 703 OR 931-797-8029

Item ID: 98970

‘16 Halverson H140

Item ID: 14077

M I S C E L L A N E O U S

Ph: (888) 401-6367 x701

‘06 Cord King Model 60

1990 Freightliner

'08 Dynamic Chipper

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT Track 708 ‘13 KMC 2500 or 702-875-2703

Item ID: 7422

Item ID: 14068

Marmon Picker Truck & Pup Trailer

AM General M818 Army Truck

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Cord King M44 Ph: ‘15 (888) 401-6367 x703 Item ID: 13961

Item ID: 14576

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

2007Austin Morbark Chipper 13916. x703

Contact: AUSTIN with 1700 hours, in very good Email: Austin@lumbermensco.com Phone: 888-401-6367 EXThigh 703 condition. Easily produces OR 931-797-8029 quality chips with patented ‘Cone’

Item ID: 9658 Best Value Portable Log Splitter WALKER in PA has -Contact: Small manufacturer Email: Walker@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 707 logs or 931-797-3915 Handles up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

W6FIDAllied Systems Item 13644. Sam x702 Winch Item ID: 56032 FIREWOOD PROCESSORS Contact: 2010 ShopMARK Built Wood Processor Email: Mark@lumbermensco.com

EXT 708 -Phone: It has a888-401-6367 353 Detroit diesel, 40

702-875-2703

inch insert tooth circle saw, 30 foot  Issue 364 388

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 59341

Item ID: 14196

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Mack Truck w/Hood homemade processor withLoader a 10’ Item ID: 76831 log deck. Has a hydraulic grapple, Contact: MARKthat all runs off chain and kicker Email: Mark@lumbermensco.com Phone: 888-401-6367 708 of a 4 cylinder MercedesEXT power 702-875-2703 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

off onto a conveyor. This is a very

'99 built Peterbilt Road well processor. ItemTractor ID 13820. Item ID: 14188 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

Morbark Chipper new for $32,500. Item ID 13865.

Morbark 58” LIKE NEW ‘95 John Deere C6 Item ID: 6114 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

Precision Chipper motor, Rotobec continuous Item ID: 4524 grapple, 5,000 original hours.

(excellent Item ID Contact:condition.). TED Email:Chris Teds@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 701 (801) 319-9351 1995 Barkoor775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Sam x702 Item ID: 80356

855 Cummings 350 KW approximately 1500 hours. Hour Item ID:The 28802 meter dont work. last 2 owners

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

LOGGING Contact: TED EQUIPMENT Email: Teds@lumbermensco.com BANDIT EXT 701 Phone: 888-401-6367 or1900 (801)Tracked 319-9351 1999 Bandit Disc 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

CAT 3412 - 600KW Prime 3412 Caterpillar Diesel engine Item ID: 85729 with 850 HP. 5300 hrs. Mill in

Contact: TED Just finished 10 good condition. Email: Teds@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 701 or (801) 319-9351 Remote control. Big production

 List  seLL  exchange  buy  save

have only used Contact: TED it to load trucks or Email: Teds@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa701 or (801) has 319-9351 delimber, grapple been rebuilt. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT D349 Gen 2 Item ID: 227 BELL

Contact: TED T - This Bell has 1990 Bell Super Email: Teds@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 701 or (801) 319-9351 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

F800 Boom Bucket Truck Item ID: 35784

Contact: FERY The Tree Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 that Started or (801) 699-8784

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER 25' LOG PUP 4 BUNKS TRAILER Woods Publishing Item ID: 8062

Viking Deloupe Trailer Item ID: 32415

SOUTHWEST FOREST PRODUCTS EXPO Contact:-AUSTIN Fri, 25 August Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS '10 Woodsman 440 Fri, 15 Sept - Sat, 16 Sept

94’ Mack Prentice 120 Selma, Northw/ Carolina Item ID: 14215 www.midatlantic-logging-biomass expo.com/ Contact: AUSTIN

Whole Tree Chipper Item ID: 14105

MID-ATLANTIC

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY 931-797-8029 OR 931-797-8029 LOGGING & BIOMASS EXPO

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

(888) 401-6367 ext. 702 Item ID: 52815 sam@lumbermens.co

Contact: MARK Austin Woods Email: Mark@lumbermensco.com Phone: 888-401-6367 708 (888) 401-6367EXT ext. 703 or 702-875-2703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

Bandit POSTMASTER Grinder - Chipper

SendItem address changes to: ID: 72593 Lumberman's Exchange P.O. Box 1916 Contact: TED Email: Teds@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 701 or (801) 319-9351 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of contentBucket submitted/ by advertisers Ford Boom Truck and writers, theID: Lumberman's Item 80919 Exchange, its principles and associates, TED are not held liable for Contact: errors or omissions. Reproduction, Email: Teds@lumbermensco.com Phone: EXT 701 in whole888-401-6367 or part, is prohibited with out written orconsent. (801) 319-9351

Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 www.arkloggers.com 931-797-8029

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

MARKETING DIRECTOR

Wall Tumbler BlockbusterSam Firewood

Item ID: 8256

Inline 6 CAT 200 KW Item ID: 44131

Cambridge, Ohio www.ohioforest.org '09 Mack Truck & Trailer Item ID: 74618

** INFO LINK**

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Int'l 4300 Bucket Truck Item ID: BANDMILLS & 29129 HEADSAWS

Contact: Band MARKResaw - Roughly Danckaert Email: Mark@lumbermensco.com 10 hours on this machineEXT since it Phone: 888-401-6367 708 702-875-2703 has been rebuilt, it has a 24foot in

pressure guides. Top Truck Casting wheel Mack Log Item ID: 14087 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 a minute 931-797-8029 feet also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

Tajfun Firewood Processor hours ready to run. Item ID 13434. Item ID: 14249 Sam x702 Contact: AUSTIN& DRIVES CARRIAGES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 OR 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Item ID: (AIM) 761 ........ 36

Morbark ..................................... 9 Item ID: 41386

Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks 25 Phone: 888-401-6367.................... EXT 703 OR 931-797-8029

CW Mill-ArmorHog .............. 17

Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 708 702-875-2703 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MACK CHN613

Kenworth Log Truck Hurst Boiler ............................. 14

Item ID: 4849 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat 931-797-8029 ................................. 24

75” Fulghum Chipper

3 Strand Log Deck

Thomas Industrial Controls..... 10 Item ID: 14095 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

02’bottom Jackson Lumber 48" saw and 36"Harvester top saw Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Morbark 40/36 Item ID: 647

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 801-362-2170 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES Contact: JOE Morris Woods Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (888) 401-6367 ext. 704 801-362-2170 morris@lumbermens.co

Boonville, New York www.starwebhosting.net/woodsmen/ Sun 4 Bolster Log Trailer

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 388

tach, oil pressure, water temp and PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

NOVEMBER 2019

kohing head. head works great.

If you need to Change your Address or Item ID 13185. Sam x702 Add Your Name to our mailing list, then Barkoand 160D -mail new engine manuals and receipts. Purchased please complete this1999 form to: with One owner and comes with all

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine meter dont work. The last 2 owners Sam x702 P.O. Box 1916 have38402 only used it to load trucks or LOGGING EQUIPMENT Columbia, TN

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt. 1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter. 13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof - IP67 rated day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge • Not affected by vibration EDGERS & GANGS adjustable to single two way. Great • 60k LUX Immunity to sunlight Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great.

Albach Northamerica......................3, 6............................978-939-9111 Anson..................................................7................................800-663-7723 B & B Mfg..........................................11..............................800-654-5320 B. H. Payne........................................12..............................404-761-8711 Baker...................................................5, 11.........................800-548-6914 ‘93 Barko 180B Bell's Machining...............................15......................... .....888-995-1965 ‘16 Halverson H140 Blockbuster Inc.................................11.Item .............................888-775-4883 ID: 14077 Contact: Austin Buck Equipment(DEMO) (AIM)....................6................................800-803-3365 Skidsteer (888) 401-6367 x703 Built-Rite Firewood Processing Equip...12.Ph: .............................800-757-2520 Item ID: JW-909632 Cord King...........................................2................................888-219-9663 Contact: J Williams Ph: (888) x701 Corley Mfg.401-6367 ........................................15........................... ...423-698-0284 Edger For Sale...................................10..............................717-363-6304 F&R Mfg.............................................16..............................800-355-1250 Great Lakes Mfg...............................13..............................877-248-5677 Hurst Boiler.......................................19..............................877-774-8778 James G. Murphy Auctions............9................................425-486-1246 Kilgore Saw........................................12..............................888-857-5153 ‘95 John Deere C6 Klug Korners.....................................15..............................800-471-5060 Farmer Laona Machine Supply....................17..Tree ............................715-674-3909 ID: 13920 Lignomat............................................14..Item ............................800-227-2105 Contact: Austin ‘13 KMC 2500 Track L-M Equipment Co. Ltd...................1................................800-455-8807 Ph: (888) 401-6367 x703 Menominee SkidderSaw...............................15..............................800-582-0470 Metal Detectors, Inc........................13..............................541-345-7454 Item ID: 14078 Midwest ......................16..............................231-924-5953 Contact:Sharpening Austin capacity!. Item ID 13421. Sam x702 Multitek North America. LLC........14..............................800-243-5438 Ph: (888) 401-6367 x703 BARKO Pantron Automation, Inc. ..............38........................... ...800-211-9468 1994 Barko 160B - Electric Piper’s Saw Shop..............................8................................800-845-6075 30' boom, 75hp off onto aManufacturing, conveyor. This isInc.. a very Prolenc ..........10.knuckleboom, .............................877-563-8899 motor, Rotobec well built processor. Item ID 13820. Row Electric......................................16...........................continuous ...800-248-4479 5,000 original hours. Sam x702 Select Sawmill Co.............................13.grapple, .............................866-724-7600 Trelan..................................................40. .............................877-487-3526 (excellent condition.). Item ID Firewood Processor - This is Inc................14.13238. .............................800-647-8440 Chris x700 aUniversal ChomperWearparts, Model 16 PDA Woodcracker Forestprocessor Machines.....39.1995 .............................617-401-5584 Barko 775 B Feller Buncher automatice firewood Woodlandia.......................................17. ............................877-508-8777 - .Pumps recently redone. 400 hrs with John Deere power unit with Wood-Mizer......................................4................................800-553-0182 on injection pump. always started low hours. Control panel includes

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change. Boomto cylinders minor leaks. Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better. 475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Address:_________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine

x702

State:___________________________________________________________________ BELL with 850 HP. 5300 hrs. Mill in Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone:__________________________________________________________________ control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

WOODCRACKER.COM NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/ ®

WOODCRACKER

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree tree shear Efficient

Hot Springs, Arkansas www.arkloggers.com

that Started it All!

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 WATCH THE VIDEO sam@lumbermens.co TO THIS STORY!

** INFO

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

MayINbe sent to MADE AUSTRIA

morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

with 44 inch wheels, and all the

Item ID 13876. Austin x703

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

feed deck 20 foot out feed deck

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

10 hours on this machine since it

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Danckaert Band Resaw - Roughly

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

“The efficiency is CARRIAGES & DRIVES 2010 Cardinal HD Carriage LINK** unparalleled!“ Carriages (Sawmill) - Cardinal

it includes carriage ElmarCarriage Varro,line Indiana

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion of the publisher and may WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER be edited for purposes clarity device Great Lakes Sawmill Root stockofclearing Wood Mfg splitter. .................... 34 SmithClearing rake........................... 4 Wood splitting grapple and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for  learn more about the efficient Woodcracker® forest machines  +1-617-401-5584  www.woodcracker.com errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with New inventory arriving monthly. Call 24 for availability to find a dealer www.BakerProducts.net Lignomat ................................. WoodMizerand ................................ l near you. out written consent. 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing ®

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS™ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

498 Eight Mile Road | Remus, MI 49340 Phone: 989-561-2280 | WWW.TRELAN.COM

Model 640-RC

440-Hp CAT Tier-3 Engine

$275,000

45 Over 45 Years!

Model 646-WRC

540-Hp CAT Tier-3 Engine

$350,000

Model 686-WRC

875-Hp CAT Tier-4 Engine

$490,000

8.0000 8.0000

TOP QUALITY

KNIVES

5.8448 5.8448

MADE IN THE USA PART # - DECPART # - DEC-DWG # - 975-800085 DWG # - 975-800085

at Remarkably Low Prices BEST PRICE IN TOWN!