F R E E
E Q U I P M E N T
L I S T I N G S
TM
WOODCRACKER.COM WOODCRACKER.COM WOODCRACKER WOODCRACKER ®
®
Efficient Efficient tree shear tree shear
Visit us at the Paul Bunyan Show Booth #432
WATCH THE VIDEO WATCH THE VIDEO TO THIS STORY! TO THIS STORY!
“The efficiency “The efficiency is is unparalleled!“ unparalleled!“ Elmar Varro, Elmar Indiana Varro, Indiana
MADE IN AUSTRIA MADE IN AUSTRIA
WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER ®
®
Root stock clearing Root device stock clearing deviceWood splitter
®
Wood splitter
®
®
Clearing rake
Clearing rake
®
®
®
Wood splitting grapple Wood splitting grapple
® ® learn more about learn more the efficient about the Woodcracker efficient Woodcracker forest machines forestmachines +1-617-401-5584 +1-617-401-5584 www.woodcracker.com www.woodcracker.com
New inventory Newarriving inventory monthly. arriving Call monthly. for availability Call forand availability to find a and dealer to find near a dealer you. near you.
ALBACH DiAMANT “Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
2nnn
‘93 Barko 180B Logging and tree care equip�ent ne,ct level ‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
• Independent differential lock • Permanent 4-wheel drive system • Smart engine & hydraulic cooling ‘95 John Deere C6 management Farmer • Albach Trac - GPS, Tree data and diagnostic Item ID: 13920 system
Contact: Austin ‘13 KMC 2500 Track ■ Cab lift with rotatable seat 180 degree Ph: (888) 401-6367 x703 Skidder
• 270 degree spout rotation
Item ID: 14078 3 • High throughput capacity!. - up toItem 400IDm13421. /h Sam x702 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
• Ready to chip in less than 30 seconds BARKO Barko 160B - Electric • Best chip quality1994 in its class
off onto a conveyor. This is a very
knuckleboom, 30' boom, 75hp
Sam x702
grapple, 5,000 original hours.
• Unmatched low-fuel motor, Rotobec continuous consumption
well built processor. Item ID 13820.
(excellent condition.). Item ID
Firewood Processor - This is
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
I
unit. Has a 4’ chain saw that kicks
Albach Northamerica
Issue 364 386
a Chomper Model 16 PDA
Lumbermens™ since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
good condition. Just finished 10
Acre clearing job, ready to work!
I
Remote control. Big production
sales@albach.us
13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has aCTR .- -�
-.�
-�-·...
-. rebuilt. ·, �,--:delimber, grapple has been
: ..__ :-,{: �:if::_� ·'.-....
Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
1990 Bell Super T - This Bell has
a brand new Duetz engine. Lever
control, 33” bar, pump and tranny
1-(978) 939-9111
List seLL exchange buy save
❘
LumbermensCO.com
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
The Tree that Started it All!
Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Escanaba, Michigan
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
DESIGN DIRECTOR Donna Heninger
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
** INFO LINK**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L! (888) 401-MENS 401-MENS
NO. 3
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Trucks, Construction and Forestry Sept. 17 - Sept. 19 ‘93 Barko Montgomery, AL 180B ‘16 Halverson H140 Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
,-soo-211-94&8
capacity!. Item ID 13421. Sam x702
BARKO
off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
13HP Honda motor. Manual start
• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof - IP67 rated day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge • Not affected by vibration EDGERS & GANGS adjustable to single two way. Great • 60k LUX Immunity to sunlight Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot Issue 364 386
Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID
Firewood Processor - This is
‘05 Gehl CTL 70
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
13238. Chris x700
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865.
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners
Sam x702
LOGGING EQUIPMENT BANDIT
have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt.
1999 Bandit 1900 Tracked Disc
Boom cylinders have minor leaks.
Chipper - Cat Under Carriage at
Item ID 13694. Sam x702
50% or better. 475 hp Cummins
94 Barko 275 - Excellent value
Diesel. 7500 Hours. One owner.
with low at hours at 3,500. 5.9
Well maintained. Item ID 13294.
CUMMINS continuous grapple.
Sam x702
Runs Great!. Item ID 13740. Sam
2004 Bandit Beast Model 4680 -
www.JMWood.com x702 LISTING WITH PICTURES 3412 CHECK Caterpillar Diesel engine FOR COMPLETE
with 850 HP. 5300 hrs. Mill in
(334) 264-3265 good condition. Just finished 10 262-0370 Acre(334) clearing job, ready to work! www.JMWood.com
Remote control. Big production
BELL 800-447-7085
1990 Bell Super T - This Bell has
a brand new Duetz engine. Lever
control, 33” bar, pump and tranny
AL Lic. 1137 (Bryant Wood, Auctioneer) AL Lic. 1791 (J.D. Gray, Auctioneer)
List seLL exchange buy save
❘
LumbermensCO.com
PleAse PrINt
blades and 1 spare 36" blade),
❑ Please Remove
** CALENDAR**
where to order included. Item ID 12846. Sam x702
Zip
cuts from sawline, log stop and
loader to drop logs onto carriage,
Precision 58 Chip Pac - Single chute
stop and loader to deal with big
Sam x702
heavy duty log turner under log
loading system,. Item ID 12764.
logs onto carriage and track and
State
frame. Significant new spare parts
to be negotiated separately. Item ID
TM
FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and
13198. Sam x702
Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/
From TA ApriL BLE
all steel carriage. Husk. Manual
chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New clutches, disc, bearing, liners and
custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.
Danckaert Band Resaw - Roughly
Fri, 25 August - Sat, 26 August
DEPARTMENTS The Tree that Started it All!
Trelan Chipper - This is a remote
OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on
'12 WoodmIzer LT 40 SOUTHWEST
City
❑ Please Change
Pulleys on Bearing . Parts Book and
short pop-up transfer to edger,
EquipmEnt REpREsEntativEs
EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in
Deals of the Month..................15 Company Name*
❑ Please add
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings! Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production
Escanaba, BUY SMichigan AVE
Phone
Address
Individual Name
Ad Directory..............................38 EST 1986 MID-ATLANTIC LOGGING & BIOMASS PUBLISHER
LIST
SELL
EXCHANGE
2012 JoHn deere 548G3 Fri,
*Company name and address required to process your change.
If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MARKETING DIRECTOR
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Mark Laxton Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 708
THE PAULmark@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
✁
Sam Wall For classifieds CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, P.O. Box 1916, (888) 401-6367 ext. 702 Columbia, TN 38402. When possible, please include an old address label. Call toDay sam@lumbermens.co
(888) 401-6367 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Austin Woods Lumbermens™ accepts no responsibility for their claims. No Issue lumbermenS Since 1986 in ❘ any form liSt Sell part of this364 publication may be 703 reproduced or transmitted or by any means, (888) 401-6367 ext. electronic or mechanical, including photocopying, recording or any information storage austin@lumbermens.co retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ MAILING ADDRESS owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use B & B Mfg. ............................... 18 P.O. Box 1916 outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, Columbia, TN 38402-1916 and printing material contained within. We shall not be liable for omissions or typographical B. H. Payne .............................. 16 errors. (888) 401-6367
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
Cambridge, Ohio www.ohioforest.org
Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co
Walker Woods
** INFO LINK**
(888) 401-6367
exchange buY Save
machine, with air strain conveyers
Chris Woods
that go up and down, with airbags, it(888) includes401-6367 two sets of Mcdonough
pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This
is an extremely accurate machine Morris Woods, Ad Sales Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
FAbTeK 344b
DESIGN DIRECTOR
May be sent to morris@lumbermens.co
401-6367 15 Sept - Sat,(888) 16 Sept
chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co
SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet Donna Heninger manufacturing, and secondary wood manufacturing industry, is free within the United States item id: 14061 to qualifying manufacturers and industry suppliers. Please limit your subscription tox701 one free contact: J Williams EQUIPMENT REPS copy per company or mill location.
AD SUBMISSIONS
AD Sales
Selma, North CarolinaExt. 704 www.midatlantic-logging-biomass morris@lumbermensco.com expo.com/
Reduced PRice item id: 14021 contact: Sam x702
P.O. Box 1916 Columbia, TN 38402
Lumbermens Magazine
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
Morris Woods
item id: 14061 contact: Austin x703
❘
Ext. 707
walker@lumbermensco.com
M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33
morris@lumbermens.co feet a minute also has CLT presses.
Austin Woods Item ID 13876. Austin x703 S (888) & W 125401-6367 Band Mill with
Caterpillar generator - Low hours Ext. 703
on the mill, electronic computer Set austin@lumbermensco.com
works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam Wall
Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext. 702
CARRIAGES & DRIVES (888) 401-6367
sam@lumbermens.co
2010 Cardinal HD Carriage
lumbermenSmagazine.com
Ext. 709
Carriages (Sawmill) - Cardinal joe@lumbermensco.com
Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
Baker ...................................... 5, 7
Menominee Saw ..................... 29
Bell's Machining ..................... 27
The Tree Brute Force Mfg. ..................... 31 that Buck Equipment (AIM) ........ 36 Started 32 Corley Mfg .............................. CRD Metalworks .................... it All! 25
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Midwest Sharpening.............. 26
carriage knees, husk including
Since 1986, Lumbermens™ CW Mill-ArmorHog ..............has 17 published a monthly circular reaching sawmills, loggers, pallet makers, CW Mill-Hogzilla ................... 15 recyclers and industrial woodworking plants Dynaworldwide. Products ........................ 35
Rotochopper............................ 40
Empire Woods Hydraulics ................... 8 Publishing
Select Sawmill ......................... 19
DESIGN DIRECTOR Great Lakes Mfg . .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3 MAILING ADDRESS
The Paul Bunyan Show ......... 39
PUBLISHER
Ted Monnin
P.O. Box 1916 • Columbia, TN 38402 (888) 401-6367 Hurst Boiler ............................. 14 AD SUBMISSIONS Iron BullMay ................................... 21 be sent to— morris@lumbermensco.com
Kilgore Saw ............................. 22 POSTMASTER
Send address changes to: 24 Lignomat .................................
Lumbermens™ Magazine P.O. Box 1916 • Columbia, TN 38402
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
Ted Schultz
(888) 401-6367 Ext. 701
Morbark ..................................... 9
teds@lumbermensco.com
Multitek ................................... 12
Piper's Saw Shop.................... 13
Will
Row Electric ............................ 20
Keene
Sawmill Exchange .................. 11
(661) 900-7726
Will@lumbermensco.com
Call US Today for ALL your Universal Refiner ................... 23 Equipment Needs! WoodMizer ................................ l Thomas Industrial Controls..... 10
Union Grove Saw & Knife.. 2, 37
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
sawyers cab, computer controls, Sam Wall
(888) 401-6367 Ext. 702
48" bottom saw and 36" top saw sam@lumbermensco.com
STACKING RAC
Fernanda
McDermott
(801) 699-8784
fery@lumbermensco.com
Wes Graber (888) 401-6367 Ext. 710
www.BakerProducts.net
Wes@lumbermensco.com 800.S48.6914 I S73.663.7711
❘ L! (888) 401-MENS 401-MENS
NO. 5
IN THE U DE
P
RE
‘93 Barko 180B
T
Y
30+ Years Strong!
MA
Paul Bunyan Show Oct 4-6 • Cambridge, OH
Firewood Firewood Wrapper Wrapper SA
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Great Lakes Logging Expo Email Sept. 5-7 • Escanaba, MI info@empirehyd.com
M IU
M Q UA
LI
‘16 Halverson H140 Safe Skidsteer (DEMO) From Price To Performance, We’re A Cord Above The Rest!
Firewood Processors: 8 Models Firewood Cleaners Firewood Conveyors: 12’, 20’ & 30’ Operator’s Cabs Firewood & Log Grapples Free DVD
13428 Victory Ln. // PO Box 124
319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA
‘05 Gehl CTL 70 FireWOOD/WaSteWOOD
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter Sell Your WOOD – $300/cord or More! - Small manufacturer in PA has
with 1700 hours, in very good
condition. Easily high by shrink made the bestwastewood valued log splitter. Double or tripleproduces your profits wrapping - forequality chips with patented ‘Cone’
Handles logs up to 32”. Uses
wood with WOOD-PAKer! Attractive various size packages can be drum design. Can easily load 42’ 13HP Honda motor. Manual start obtained with our high production, easily operated and affordable vans and produce 6 - 8 loads per but electronic option is available. machines. Eight machines available. Has The ideal equipment for producday. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge ing square bundles-palletizable for ease in storage and transporting. EDGERS & GANGS adjustable to single two way. Great Inquire for -free Video samples fee. x702 Brewco Saws Twodetails. Brewco Sawsand Package Value! PA. Item at IDnominal 12062. Sam in excellent condition. Runs great.
Firewood Processor - This is a
&13644. B Manufacturing River Roadprocessor • Olean, NY 14760 ItemBID Sam x702 • 3007 Westhomemade with a 10’ FIREWOOD PROCESSORS
log deck. Has a hydraulic grapple,
Toll Free 1-800-654-5320
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
chain and kicker that all runs off of a 4 cylinder Mercedes power
E-mail: bbmfg@verizon.net unit. • Web:Has www.bbmfg.org inch insert tooth circle saw, 30 foot a 4’ chain saw that kicks Issue 364 386
Lumbermens™ since 1986
❘
Item ID: 13920
Contact: Austin sales@gofastmfg.com Ph: (888) 401-6367 x703
800-854-7439
off onto a conveyor. This is a very
Go Fast Manufacturing, LLC W7824 Smith Street BARKO Shiocton, Wisconsin 1994 Barko 160B - Electric54170
Go FastItem Manufacturing, capacity!. ID 13421. Sam LLC x702 knuckleboom, 30' boom, 75hp
motor, Rotobec continuous wellWebsite built processor. Item ID 13820. Largest For The Tree & Landscape Industry
Shrink Wrap
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703
‘95 John Deere C6 Better Bundles Faster!Tree Farmer
TM
blockbuster-inc.com
‘83 John Deere 4850
Heavy Duty Frame HD Gear Box 1/3 HP 120V Motor True Gear Reduction Fork Pockets
Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
Adams Center, NY 13606(888-775-4883) 888-SPLITTER
WWW.TREETRADER.COM ~ The World’s
Item ID: JW-909632 Simple Contact: J Williams Reliable Ph: (888) 401-6367 x701
www.gofastmfg.com ‘13 KMC 2500 Track Skidder
Portable • DePenDable • low Maintenance
100
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
Sam x702
grapple, 5,000 original hours.
a Chomper Model 16 PDA
13238. Chris x700
Firewood Processor - This is automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.
‘97 OneTimberjack owner and comes with all 360C manuals and receipts. Purchased Item 14044 newID: for $32,500. Item ID 13865. Contact: Sam Sam x702 Ph: (888)LOGGING 401-6367 x702 EQUIPMENT
BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
John 2004 Deere Bandit 548D Beast Model 4680 Item 14024 3412ID:Caterpillar Diesel engine Contact: Sam with 850 HP. 5300 hrs. Mill in Ph: (888) 401-6367 x702
good condition. Just finished 10
Acre clearing job, ready to work! Has a 2000 hour warranty. It comes Remote control. Big production mounted on 30.5 tires at 95%.
Comes with a 22” tower head. Item List seLL exchange buy save ID 13864. Sam x702 2015 John Deere 748L - This is
(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
1990 Bell Super T - This Bell has
a brand new Duetz engine. Lever
control, 33” bar, pump and tranny ❘
LumbermensCO.com
ngle Joystick Control 0 Ton Splitter • 67 HP CAT Diesel Cylinder Engine
o Choose From!
4000 SERIES
BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS ManyPROCESSORS Models & BELL’S FIREWOOD CALENDAR**
**
• 67 HP CAT Diesel • 44” Circular Engine Saw 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Diesel Capacity • Single Joystick FIREWOOD TUMBLER • Single Joystick Control Saw • Sturdy HSS Steel Welded Control • 30 Ton Splitter er • 30 Ton Splitter • 4’ Diameter Barrel Cylinder Cylinder • 67 HP CAT Diesel ick • Clean Out Chute
4000 SERIES
Options to Choose From! 4000 SERIES
Many Models & FIREWOOD TUMBLER • Sturdy HSS Steel Welded 4000 SERIES Options to Choose From! • 4’ Diameter Barrel
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York
www.starwebhosting.net/woodsmen/ 67 HP CAT Diesel • 44” Circular Saw •• Removes Debris & Bark as large as• Clean 2 ¼”Out Chute • 67 HP CAT Diesel er Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic Lift conveyors ••Single 44”Joystick Circular Saw 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Pack Available Capacity Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder Capacity Hot Springs, Arkansas • 4’ Diameter Barrel Control • Single Joystick • Clean Out Chute www.arkloggers.com • 30 Ton Splitter Control • Removes Debris & Bark as large as 2 ¼” Cylinder Engine
4000 SERIES4000 SERIES SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August The Tree Many Models & Many Models & that Started Options to Choose From! Options to Choose From! it Models All! • 30 TonMany Splitter Lift conveyors &• Works with all of our Double chain Hydraulic 72ND ANNUAL GREAT LAKES Cylinder • Optional Honda Power Pack Available Options to Choose From! Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Many Models & FIREWOOD TUMBLER Made In published a monthly circular Canada Options to Choose From! FIREWOOD • Sturdy HSSTUMBLER Steel Welded Thurs, 7 Sept - Sat, 9 Sept
•• Sturdy HSS Steel 4’ Diameter BarrelWelded reaching sawmills, loggers, Escanaba, Michigan Clean Out Chute •• 4’ Diameter Barrel TUMBLER pallet makers,FIREWOOD recyclers and Many Models & • Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS Steel Welded• FIREWOOD TUMBLER Out Chute industrial woodworking plants • Sturdy HSS Steel Welded Works withDebris all of our Double chain Made In • 4’ Diameter Barrel Options to Choose From! LOGGING & BIOMASS •• Removes & Bark asMID-ATLANTIC largeHydraulic as 2 ¼” Lift conveyors worldwide. • Clean Out • 4’ Diameter Barrel • Optional Honda Power Pack Available Chute
Canada Many Models • Works with all&of our Double chain Hydraulic Lift-conveyors Please Call for Details • Clean Out Chute Fri, 15 Sept Sat, 16 Sept • Removes DebrisDebris & Bark as large as 2 ¼” • Removes & Bark large Made In as 2 ¼” Honda Power Pack Available •as Optional PUBLISHER • Works with all of our Double chain Hydraulic Lift conveyors • Works with all of our Double chain Hydraulic Lift conveyors Selma, North Carolina Options to Choose From! Canada Woods• Publishing Optional Honda Power Pack Available FIREWOOD TUMBLER Optional• Honda Power Pack Available www.midatlantic-logging-biomass • Sturdy HSS online Steel Welded MID-ATLANTIC or visit us ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO • 4’ Diameter Barrel
1-888-995-1965
Details
www.bellsmachining.com • Clean Out Chute Morris Woods FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” (888) 401-6367 ext. 704 Financing KENTUCKY WOOD EXPO • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors morris@lumbermens.co Made In Please Call for Details • Optional Honda Power Pack Available
MARKETING DIRECTOR 1-888-995-1965 John Williams
-1965or visit us online
Made In Canada
Made In Canada
(888) 401-6367 ext. 701 j@lumbermens.co www.bellsmachining.com
Made In Canada
1-888-995-1965
www.bellsmachining.com (888) ext. 702 or visit us 401-6367 onlineFinancing or visit usAvailable online sam@lumbermens.co www.bellsmachining.com Please Call for Details www.bellsmachining.com Austin Woods Financing Available
BANDSAW 1-888-995-1965
Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
All Sizes Available!
Sam x702
Made In Canada TOP PERFORMING, economical blades for all primary & secondary wood processing. Welded to your lengths! We also offer expert sharpening services, plus...
BLADES ** INFO LINK**
(888) 401-6367 ext. 703 Available Financing or visit us online austin@lumbermens.co
BANDMILLS & HEADSAWS
in ve1y good condition, Cuts 130
Fri, 15 Sept - Sat, 16 Sept • 4’ Diameter Canada Barrel • Clean Out Chute Lexington, Kentucky MadeDebris In • Removes & Bark as large as 2 ¼” Canada http://www.kfia.org/ • Works with all of our Double chain Hydraulic Lift conveyors KentuckyWoodExpo.aspx • Optional Honda Power Pack Available
nline Please CallPlease for Details Call for Details DESIGN DIRECTOR Financing Available 1-888-995-1965 Donna1-888-995-1965 Heninger ning.com Please Call fororDetails visit us onlineCall for Details Please EQUIPMENT REPS or visit us online www.bellsmachining.com ailable 1-888-995-1965 Sam Wall Financing Available
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
CARRIAGES & DRIVES
2010 Cardinal HD Carriage
Gang • Edger • Scragg • Trim • Split • Strob
www.bellsmachining.com MAILING ADDRESS ....and just about any Custom Saws you need Financing Available to keep cutting longer... & B Mfg. ............................... 18you M&F Gauge ............................. 28 P.O. Box 1916 Please Call for BDetails for less. Ask about FREE Shipping!
Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage
B. H. Payne .............................. 16 1-888-995-1965
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
May be sent to Bell's Machining ..................... 27 www.bellsmachining.com morris@lumbermens.co
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31 Financing Available
Midwest Sharpening.............. 26
carriage knees, husk including
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS or visit
us online
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
drive, hyd pac for carriage,
48" bottom saw and 36" top saw
Call Marvin Miller for a quote
231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 Corley .............................. 32 Multitek ................................... 12 ©2019 Wood-Mizer Mfg LLC
STACKING ROW ELECTRICAL EQUIPMENT, RAC INC. CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial YOUR SOURCE FOR USED, RECONDITIONED: submissions are used at the Empire Hydraulics ................... Select Sawmill ......................... • Squirrel Cage Motors 8• DC Motors - Crane and Mill 19 • Transformers, Three-Phase discretion of the publisher and may • Gear Motors Speed Drives •4 Across/Line Magnetic Starters be edited for purposes of clarity Great Lakes Mfg. .................... 34• Adjustable Smith Sawmill ........................... and space. Although all efforts have • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of • Synchronous Motors • Engine-Generator Sets • Safety Switches content submitted by advertisers • DC Motors • Transformers, Single Phase • Phase Convertors Hurst Boiler ............................. 14 Thomas Industrial Controls ..... 10 and writers, the Lumberman's Exchange, its principles and P.O. Box 281221 • Toledo, Ohio 43606 Iron Bull ................................... Union Grove Saw & Knife.. 2, 37 associates, are not held liable for ax to WWW.RoWELECTRiCAL.CoM errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with 419-248-4479 rowelec@glasscity.net www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent. 800.S48.6914 I S73.663.7711 WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL ©2017 Woods Publishing
F
800-248-4479
:
419-244-8887
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 7
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘93 Barko 180B
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
off onto a conveyor. This is a very
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric
well built processor. Item ID 13820.
NEW!
Sam x702
Firewood Processor - This is BakerProducts.net 573.663.7711 a Chomper Model 16 PDA
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 800.548.6914 13238. Chris x700
AUTO-CHOP ‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on Item ID: 14073 15-HP motor 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
Item ID 13644. Sam x702
amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
50% or better. 475 hp Cummins
Firewood Processor - This is a
homemade processor with a 10’
all runs off • Board sizes it will handlechain areand 2x4kicker , 2x6that & 2x8 of a 4 cylinder Mercedes power • Lengths from 6 ft. minimum up to 16 ft. maximum
Issue 364 386
tach, oil pressure, water temp and
but electronic option is available.
13HP Honda motor. Manual start
2010 Shop Built Wood Processor
inch insert tooth circle saw, 30 foot
low hours. Control panel includes
1999 Bandit 1900 Tracked Disc
FIREWOOD PROCESSORS MATERIAL CAPACITIES log deck. Has a hydraulic grapple,
- It has a 353 Detroit diesel, 40
with John Deere power unit with
Handles logs up to 32”. Uses
day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Infeed & Outfeed Conveyors with EDGERS & GANGS adjustable to single two way. Great 2-HP motors Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great.
automatice firewood processor
unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 -
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great.
Item ID 13185. x702 Touchscreen HMISam Controls 1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners 26” Diameter have only used it Blade to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
+ TIME PROVEN Runs Great!. Item ID 13740. Sam CUMMINS continuous grapple. YEARS
x702 • Adjustable air stop to be set for finished board BELL up to 72” maximum 1990 Bell Super T - This Bell has good condition. Just finished 10 • Touchscreen controls for start / stop operation a brand new Duetz engine. Lever Acre clearing job, ready to work! • Air activated chop & air activated travel end stop 3412 Caterpillar Diesel engine
withlengths 850 HP. 5300 hrs.12” Mill minimum in from
Remote control. Big production
List seLL exchange buy save
control, 33” bar, pump and tranny ❘
LumbermensCO.com
** CALENDAR**
KENTUCKY WOOD EXPO September 20 & 21, 2019 The Tree that Started it All!
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Masterson Staon Park, Lexington, KY PUBLISHER
Woods Publishing
ForADVERTISING More Information On SALES Morris Woods Exhibiting or Attending: (888) 401-6367 ext. 704
morris@lumbermens.co
Kentucky Forest Industries Associaon MARKETING DIRECTOR 106 ProgressJohn Drive Williams (888) ext. 701 Frankfort, KY 401-6367 40601 j@lumbermens.co Tel: 502/695-3979 Fax: 502/695-8343 DESIGN DIRECTOR www.kywoodexpo.com Donna Heninger EQUIPMENT REPS
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York
Featuring the Latest Technology & www.starwebhosting.net/woodsmen/ & Services for: Sawmill, Pallet, Logging SOUTHWEST FOREST PRODUCTS EXPO
Fri, 25 August - Sat, 26 August Secondary Equipment, Loaders, Chain saws, Springs, Arkansas Trucks, Parts, Accessories, New & Used Equip- Hot www.arkloggers.com ment, and Much More!
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
TICKETS:
Escanaba, Michigan Adults - $5 in advance, $7 at gate; 6 & under - Free MID-ATLANTIC LOGGING & BIOMASS
Fri, 15 Sept - Sat, 16 Sept
Selma, North Carolina www.midatlantic-logging-biomass MID-ATLANTIC Live Demonstrations of Machinery & Equipment– expo.com/ LOGGING & BIOMASS EXPO
EVENTS:
Inside & Outside Exhibits
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Lumberjack Contests
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
Chain Saw Carving Skidder & Knuckleboom Contests Continuing Education for Loggers & Landowners Live Bluegrass Music and much more
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
** INFO LINK** UNIVERSAL REFINER
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
C
AD SUBMISSIONS
O
May be sent to morris@lumbermens.co
CARRIAGES & DRIVES
2010 Cardinal HD Carriage
Carriages (Sawmill) - Cardinal
B & B Mfg. ............................... 18
R
P
O
B. H. Payne .............................. 16 Baker ...................................... 5, 7 Bell's Machining ..................... 27
M&F Gauge ............................. 28
R‘94 Caterpillar A T I
Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29
Metal Detector's Inc. .............. 30
320 Midwest Sharpening.............. 26
Carriage line it includes carriage
with onboard log turners, carriage
O N ‘88 John Deere 440D drive, hyd pac for carriage,
sawyers cab, computer controls,
Brute Force Mfg. ..................... 31
Skidder
STACKING RAC
800-277-8068
content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
Hurst Boiler ............................. 14 Iron Bull ................................... 21
Kilgore Saw ............................. 22
12000 hours. Item ID 13805. Sam Thomas Industrial Controls..... 10 x702 Union Grove Saw & Knife.. 2, 37 1981 Timberjack 520 - Very hard to Universal Refiner ................... 23 come by! 653 Detroit. Runs Great!.
80% Video: http://youtu.be/R_
MQZe5QEFw. Item ID 13572. Chris x700
VALMET
www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l Item ID 13741. Sam x702 1998 Valmet 603 3-Wheeled P.O. BOX 151 • MONTESANO, WA 98563 800.S48.6914 I S73.663.7711
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
2002 Timberjack 608s with hot saw
SELL YOUR EQUIPMENT TODAY 6000 ❘ hours, 24/7 SUPPORT l§ TODAY - Approx. Machine is 0 SUPPORT
Issue 364
58 Ch
Ite Con Ph:
cabinet with electronic drives for
carriage knees, husk including Item ID: 13781 The BEST Item ID: 13936 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Contact: Sam Contact: Austin Lumberman's Exchange Ph: (888) 401-6367 x702 Industrial Corley Mfg .............................. 32 Multitek ................................... Ph: (888) 401-6367 x703 12 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 Grinders in very good shape and has been The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 4000 hours. Torque convertor well maintained. Item ID 12194. published monthly by Woods Shredders CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, transmission. 14 hole wheels. Tires Sam x702 Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 on the Planet The R-MAG is a portable wood waste grinder thathrs. can are 30.5’s at 55% and one at 80%. ‘98 Timberjack 1270B - 7,300 The H.A.W.G. is unbelievably reserved. All editorial/ advertorialsimple, durable and fast, be used in many areas of recycling. They can easily yet it will are grind almost make a Hydraulics finished submissions used at the anything and Empire CenterSawmill has very......................... little slack. This Perkins 6 Cylinder Engine. All ................... 8 Select 19 and safely grind lawn clippings, leaves, land clearing, discretion and may pulp chips. Is ideal for product of in the justpublisher one pass...even for over skidderSawmill has been aconstruction/demolition back up skidder modules and computer brand be edited for purposes of clarityConstruction waste logging slash,arestumps, grinding: Asphalt, Shingles, Waste, Green Great Lakes Mfg. .................... 34 Smith ........................... 4 and space.Stumps, Although all efforts have Waste, Difficult/Dirty Material, Tropical Waste log yard waste, railroad ties, storm waste, tropical (palm for the several years. Skidder Tires on average are around 35 years. Show .........has 39waste new. Hahn Machinery ...................... 3 The Paul Bunyan and been made to ensure accuracy of etc. (Palm & Palmetto), palmetto) etc.
POSTMASTER
Ite Con Ph:
Sam x702
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
19 44
Buncher - 6500 hours on total
❘ machine (888) NO. 9 L! 401-MENS but401-MENS no hours on 4BT3.9
Lumbermens since 1986
❘
Rem
Equi
Spee
40%
mac
main
Hard
of co
avai
Item
2005
Forw
hydr box
2012
pum
cond
hour
List seLL exch
“Precision Under Pressure”
Phone 315.284.4126 183068 State Hwy 52 ~ Fax Aniwa WI 54408 315.849.2045 Website 715-449-3999 www.empirehyd.com 183068 State Hwy 52 ~ contact@hixiz.com Email Aniwa WI 54408 info@empirehyd.com
183068 State Hwy 52 ~ Aniwa WI 54408
715-449-3999
CALL ROD contact@hixiz.com 715-449-3999 CALL ROD For Viewing and contact@hixiz.com For Viewing and Other Deals! ‘16 Halverson H140 Other Deals! CALL ROD 715-216-2751 715-216-2751 “MOTIVATED
2005 John Deere 1270D Harvest-
er, Approx 14,000+ Hrs, 758 Head. Price Reduced $75,000 Item ID: 14077 Price Reduced $75,000 Contact: Austin Skidsteer (DEMO) “MOTIVATED Ph: (888) 401-6367 x703 2005 John Deere 1270D HarvestSELLER” Item ID:SELLER” JW-909632 er, Approx 14,000+ Hrs, 758 Head. Contact: J Williams Price Reduced $75,000 Ph: (888) 401-6367 x701
For Viewing and Other Deals! 715-216-2751
“MOTIVATED SELLER” “LIKE NEW” 2016 John Deere 1110E Forwarder, 6-Wheel, 710 Tires & 3605 Bucket. All maintenance & oil changes completed by John Deere under maintenance contract. Price Reduced $250,000
“LIKE NEW” 2016 John Deere 1110E Forwarder, 6-Wheel, 710 Tires & 3605 Bucket. All maintenance & oil changes completed by John Deere under maintenance contract. Price Reduced $250,000
“LIKE NEW” 2016 John Deere 1110E Forwarder, 6-Wheel, 710 Tires & 3605 Bucket. All maintenance & changes completed by 13428 Victory Ln. // PO Box oil 124 John Deere under mainAdams Center, NY 13606tenance contract. Price Reduced $250,000
2005 John Deere 1270D Harvest‘93 Barko 180B er, Approx 14,000+ Hrs, 758 Head.
‘95 John Deere C6 Tree Farmer
2005 Fabtek FT153 Harvester, 15,000+ Hrs. Price Reduced $90,000
183068 State Hwy 52 ~
‘13 KMC 2500 Track 715-449-3999 Skidder contact@hixiz.com 2005 Fabtek FT153 15,000+ Aniwa WI Harvester, 54408 Hrs. Price Reduced $90,000
CALL ROD Item ID: 14078 Contact: Austin and For Viewing Ph: (888) 401-6367 Other Deals!x703
2005 Fabtek FT153 Harvester, 15,000+ 715-216-2751 Hrs. Price Reduced $90,000
2005 Timberjack 1270D Harvester, Approx 14,000+ Hrs, 758 Head & 700 Tires. Price Reduced $75,000
2005 Timberjack 1270D Harvester, Item ID: 13920 Approx 14,000+ Hrs, 758 Head & 700 Contact: Austin Tires. Price Reduced $75,000 Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam 2005 x702 John Deere 1270D
2005 Timberjack 1270D Harvester, er, Approx 14,000+ Hrs Approx 14,000+ Hrs, 758 Head & Price 700 Reduced $75,000 Tires. Price Reduced $75,000
BARKO
1994 Barko 160B - Electric “MOTIVATED SELLER” knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very well built processor. Item ID 13820.
motor, Rotobec continuous
Firewood Processor - This is
(excellent condition.). Item ID
Sam x702
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
Innovative 13238. Chris x700
a Chomper Model 16 PDA
Clean-Burn Design 1995 Barko 775 B Feller Buncher automatice firewood processor with John Deere power unit with “LIKE NEW” 2016 John
drum design. Can easily load 42’ day. Item ID 13882. Austin x703
Has Log Lift. Uses 4-way wedge
condition. Easily produces high
quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot Issue 364 386
- Pumps recently redone. 400 hrs
Deere 1110E Forwarder, on injection pump. always started low6-Wheel, hours. panel includes 710Control Tires & 3605 Bucket. All maintenance & good. in good working order. 22in tach, oil pressure, temp and oil changes completed water by John Deere under maintenance contract. Price kohing head. head works great. amp gauges. Cuts logs up to 16”. 2005 Timberjack 1270D Manufacturing a full line of biomass fired Reduced $250,000 Approx 14,000+ Hrs, 758 2005 Fabtek FT153 Harvester, 15,000+ combustion systems backed with fi fty years of Item ID 13185. Sam x702 Tires. Price Reduced $7 chain conveyer, 8 way splitter, on One owner and comes with allHrs. Price Reduced $90,000
innovative clean-burn design. Diverse in every 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased way with multi-fuel blending capability. Hurst 13916. stokers Austin utilize x703 hundreds of commonnew andfor $32,500. Item ID 13865. abundant solid biomass fuels. Best Value Portable Log Splitter Sam x702 Large or small scale, project - Small manufacturer in PA has LOGGING EQUIPMENT management is eased with the made the best valued log splitter. BANDIT impressively short installation time with prefabricated Handles logs up torequired 32”. Uses 1999 Bandit 1900 Tracked Disc modular components. 13HP Honda motor. Manual start Chipper - Cat Under Carriage at
with 1700 hours, in very good
grapple, 5,000 original hours.
but electronic option is available.
50% or better. 475 hp Cummins
adjustable to single two way. Great
Well maintained. Item ID 13294.
Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a Rotary Dryers Sand Dryers homemade processor with a 10’ Grain Dryers log deck. Has a hydraulic grapple, Lumber Kilns Cement Kilns chain and kicker that all runs off Kilns Mercedes power ofBrick a 4 cylinder unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
Diesel. 7500 Hours. One owner. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
50
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
YEARS
❘
LumbermensCO.com
N140
** CALENDAR**
PIPER’S Saw Shop
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
075 800 • 845 •6
01
The Tree Promotional Pricing Offer that Started Simonds Red Streak Hard Back it All! 1-1/4” x .042 x 3/4” or 7/8” Length 13’2” Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, Tell us you saw it here! pallet makers, recyclers and industrial woodworking plants worldwide.
$14.71 $14.27 each
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
L im it ed T im e O n ly
Escanaba, Michigan
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Woods Publishing
03
LOGGING & BIOMASS EXPO
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
en used
d for a
m x702
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
y 4000
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
er. It
til
m x702
dder
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
DESIGN DIRECTOR
only
Donna Heninger
Power
e new
MID-ATLANTIC
ADVERTISING SALES
EQUIPMENT REPS
ave
arch with winch. Low hoursWall on Sam
349.
skidders are hard to come by S-Dozer w/ tilt.; Limb risers; sam@lumbermens.co
d still
is
dder
d is
at 95% deal
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
Cat D5B Dozer - Cat D5B s/n
come hook up to it and go to your
this skidder at only 3700. These ext.22X380, (888) 401-6367 702 direct drive, EROPS, and better made than the new D
Hyster Winch, serviceable u/c.
WoodsItem ID 13113. Sam x702 models. Get thisAustin while you can.
(888)Sam 401-6367 ext.2000 703 Item ID 13840. x702 Cat 515 Grapple skidder 1994 Cataustin@lumbermens.co D4H TSK. Undercarriage One Owner Runs great! Is it an 60% 24” pads.Its got the 3304
excellent condition. Rubber is
MAILING ADDRESS
engine. Item ID 13558. Sam x702
job site and put it to work to up
your production. Item ID 13858.
** INFO LINK**
around 75% Has new Hydraulic
Sam x702
CLARK
Clark Ranger 665D - Tight and dry
machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires
r. Item
B & B Mfg. ............................... 18 P.O. Box 1916 pump and Charge pump. Item ID right up, and runs with no issues. Columbia, TN 38402-1916 running condition. No issues 13616. Sam x702 Item ID 13748. Austin x703 B. H. Payne .............................. 16 (888) 401-6367 concerning anything mechanical. early 70’s Clark 664 cable skidder CHAMBERS
is still
80% w/ 24” pads. Machine is in May be sent
. This is
nically
5 tires
Dual
2002 Cat D4H TSK - Excellent
Meadows Mill, Inc. ................ 33
Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,
comes with a spare tire. Gearmatic deliminator has 8000 hours with to Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Detroit power unit. Item ID 13629. good tires, brakes and Brute lights. JustForce Mfg . ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
excellentmorris@lumbermens.co condition. Item ID 13554. automatic idle down. New chains,
ment For sale
M&F Gauge ............................. 28
BANDMILLS & HEADSAWS
Menominee Saw ..................... 29
Baker ...................................... 7 3622 hours. Undercarriage is some center slack, needs front5, tires, 2010 Chambers Deliminator - This AD SUBMISSIONS Sam x702
Cambridge, Ohio www.ohioforest.org
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
POSTMASTER
Send address changes to: ❘ sell yoUr eqUipment today Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
❘
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
19 winch doesn’t hold good. 453
Buck Equipment (AIM) 24/7 sUpport ❘ (888) 401-MENS
........ No. 36 13
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L! (888) 401-MENS 401-MENS
NO. 11
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
IntegrIty • PrecIsIon • QualIty • Value “Precision Under Pressure”
Woodmaster See why we are your BeSt Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!
thIn Kerf
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
Wood-Mizer LT40
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 ck Cheut Our O
‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very
‘89 Timberjack 380A
well built processor. Item ID 13820. Sam x702 Item ID: 14039
‘05 Gehl CTL 70
‘83 John Deere 4850 ‘06 Western Star Item ID: 14073 Michigan Special Contact: Austin
Ph: (888) 401-6367 x703 Item ID: 14011 Contact: Austin Ph:1700 (888) 401-6367 with hours, in veryx703 good
condition. Easily produces high
quality chips with patented ‘Cone’ x702 drum design. Can easily load 42’
2004 Hydro Ax 470 - This cutter
vans and produce 6 - 8 loads per
has around 7000 hours. It’s a clean day. Item ID 13882. Austin x703
and tight machine. Only reason
EDGERS & GANGS
selling is due to an upgrade. Item Brewco Saws - Two Brewco Saws
ID 13846. Sam x702
in excellent condition. Runs great.
2004 Hydro Ax 670 - Engine has Item ID 13644. Sam x702
about 500 hours, PROCESSORS new saw motor FIREWOOD
and last year. Previous owner 2010disc Shop Built Wood Processor had theahydrastats - It has 353 Detroitredone. diesel, This 40
has 22” high capacity head30and inchainsert tooth circle saw, footis a very clean machine. Mounted on
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
Contact:Processor Austin - This is Firewood (888) Model 401-6367 x703 aPh: Chomper 16 PDA
automatice firewood processor
13799. SamDeere x702 power unit with with John
1998 HydroControl Ax 611EX Sawincludes Head low hours. panel Feller Buncher - with about 8800 tach, oil pressure, water temp and hours. Bunching amp gauges. CutsSaw logsHead up tohas 16”.
13916. x703 ItemAustin ID: 13855
2000 W900 KW w/ large pocketand for comes accumulation One owner with alland Rotobec MT27 manuals and receipts. Purchased lifting side shield for notching new for $32,500. Item ID 13865. larger trees before felling. Heavy Spec
Ph: (888) 401-6367 x702 - Small manufacturer in PA has
LOGGING EQUIPMENT Contact: Austin Decent running condition. Item ID
‘08 John Deere 20,000lb goose neck trailer. Item ID CT332 chain conveyer, 8 way splitter, on
Best Value Portable Contact: Sam Log Splitter made the best valued log splitter.
Handles logs to 32”. Uses HydroAx 611Bup- New injectors,
13HP Honda motor. Manual start
injector pump. New 5.9 cummins but electronic option is available.
engine. Rebuilt hydraulic pump
Has Log Lift. Uses 4-way wedge
and new teeth. Item ID 13768. Sam
adjustable to single two way. Great
x702
Value! PA. Item ID 12062. Sam x702
1999 Hydroax 511EX - New
Firewood Processor - This is a
cummins engine with only 1500 homemade processor with a 10’
hours. Caterpillar just replaced log deck. Has a hydraulic grapple, gear hydraulics atruns the end chainbox andtokicker that all off of 11000 hours total on of summer. a 4 cylinder Mercedes power
cutter. Tires 28L’ssaw @ 80%, 2 unit. Has a 4’are chain that kicks @ 40% and one slick. Brand new
Sam x702 Cummins 28L tires at 60%. Item ID:engine. 13993
Ph: (888) 401-6367 BANDIT x703 13245. Sam x702
1999 Hydro Bandit Ax 1900 Tracked Disc 2002 621E - Arouund hours on this machine, in excellent Chipper - Cat Under Carriage at 12,000 hours on this machine. condition. Item ID 13937. Austin 50% or better. 475 hp Cummins Working daily. Item ID 13884. x703 7500 Hours. One owner. Diesel. Austin x703
LIEBHERR Well maintained. Item ID 13294.
1998 711EX Saw Head Feller 2007x702 Liebherr A924C Log Handler Sam Buncher - 30.5-32 tires at 40%; 2004 Bandit Beast Rubber Tired Log Model Loader.4680 13,000 Cummins Engine rebuilt 1500 3412 Caterpillar engine hours. 40’ ReachDiesel with two section hours ago; 8750 hours; Quadco with 850 HP. 5300 hrs. Mill in boom. 60” Log Grapple with 22” Large tree saw head. Heat and good condition. Just finished 10 continuous rotation. Fixed Cab A/C work. New bearings saw. Acre ready toin work! Riserclearing with cabjob, guard protection. Cutting trees today. Item ID 13353. Remote control. BigTight production Front push blade. and dry. Sam x702 Cleaned, Serviced, and Checked
with Issue50% 364 Lumbermens ™ since 386tread. List buy save 34’s Item ID 13828. center1986 section. ❘20” single post seLL exchange KMC out for service. Can pull loaded
Sam x702
head. Heat and air work. Item ID
440B/C
Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702
20
Ite Co Ph
‘95 John Deere C6 Tree Farmer
1-888-857-5153 Quality • Our Service • Our Price
Item ID: 14077 Contact: Austin 84/85 Deere Ph: (888)John 401-6367 x703
Item ID: 13995 Contact: Austin Ph: (888) 401-6367 x703
Band saw Blades Ask About Our Dismanteling Blades
‘93 Barko 180B
KMC Track Skidder 2500P -
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
‘90 Bell BARKO Super T Item ID: 13896
1994 Barko 160B Contact: Sam- Electric
knuckleboom, 30' boom,x702 75hp Ph: (888) 401-6367 motor, Rotobec continuous
grapple, 5,000 original hours.
John Deere Dual Arch Grapple, (excellent condition.). Item ID
John Deere winch, Model 4000, 13238. Chris x700
Cummins Engine, Model 6BTA,
1995 Barko 775 B Feller Buncher
Clark Transmission 28000.400 Item - Pumps recently redone. hrsID 13738. Austin x703 always started on injection pump.
KOMATSU good. in good working order. 22in
‘04 CAT 953C Frontend Loader Log Max 7000XT processing head. 2007 Komatsu PC220LC kohing head. head worksw/2009 great. Item ID 13185. Sam x702
Item ID: 13854 Contact: Sam approximately 1500 hours. Hour on Log(888) Max.401-6367 Excavator style. Cab Ph: x702
1999 hours Barko on 160D - new7200 engine with 9700 carrier. hours
meter dont work.pads. The last owners guard. Flotation One2owner. have good only used it to load Very condition. Itemtrucks ID or trailer. 4-Wheel drive and steering. as a backup as needed. Has a CTR 13464. Sam x702 Top Quality machine. Would be delimber, grapple has been rebuilt. 2008 Komatsu D61-EX Dozer great for log yard or mill work. Boom cylinders have minor leaks. - Great Condition. 4511 Hours. Item ID ID 13694. 13476. Sam Sam x702 x702 Item Komatsu U/C at 95%. 35% Pads. 6 2011 Liebherr Rubber Tired 94 Barko 275 - A904 Excellent value Way Blade. Fully Enclosed comfort Log Handler. Liebherr 4 cylinder with low at hours at 3,500. 5.9 cab. Great price!. Item ID 13570. engine withcontinuous great fuel economy. CUMMINS grapple. Sam x702 Runs IDcab 13740. 11,230Great!. hours.Item Fixed riser.Sam Two 2012 Komatsu D61EX 15 Dozer x702 section boom with 38’ reach. Cab with only 750 Hours. Triple BELL drive protection. 4-Wheel and Rippers; Limb Sweeps; Enclosed 1990 T - Thistrailer. Bell has steer.Bell CanSuper pull loaded cab withnew Heat/AC; 6 way blade; aCleaned, brand Duetzand engine. Lever serviced inspected. Undercarriage at 90%; Excellent control, 33”dry bar,and pump and Tight and ready fortranny work. Condition!. Item ID 13459. Sam Located in Baltimore, MD. Item ID ❘ LumbermensCO.com x702 13477. Sam x702 2014 Komatsu 450 - Only 1100
‘14 Lo
On Ite Co Ph
2011
Log
eng
11,2
sect
pro
stee
trail
insp
for w
MD
1997
Pier
on 6
Goo
just
deli
1987
MO
**
Now One Phone PutsCALENDAR** You in Touch with ThE Single Source NY STATE WOODSMEN'S FIELD DAYS August - Sun, 20 August for all your Sawmill Needs! Fri, 18Boonville, New York
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
www.starwebhosting.net/woodsmen/
Corley Sawmill maChinery Tyrone Berry Carriage DriveS SOUTHWEST FOREST PRODUCTS EXPO lewiS ConTrolS opTimizaTion Fri, 25 August - Sat, 26 August The Tree Hot‘03 Springs, Arkansas John Deere www.arkloggers.com
that Started Carriage Linear & Set Shaft it All! “Electronics for sawmills by sawmillers” Lewis Controls
PUBLISHER
72ND ANNUAL Item ID: GREAT 13851 LAKES LOGGING &Contact: HEAVY EQUIPMENT EXPO Sam Thurs,Ph: 7 Sept Sat, 9 Sept (888) 401-6367 x702 Escanaba, Michigan
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
DESIGN DIRECTOR
mfg
John Williams (888) 401-6367 ext. 701Equipment j@lumbermens.co Digest
www.corleymfg.com • sales@corleymfg.com Donna Heninger
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
machine, with air strain conveyers
Loader in‘04 ve1yHood good condition, Cuts 130
Sam x702 CARRIAGES
only 6650 hours. New center
section. Cummins engine with
electronic automatic transmission. M&F ............................. 28 Item Gauge ID 13777. Sam x702
B. H. Payne .............................. 16 Meadows Mill, Inc . ................ 33 1998 Timberjack 460 - Excellent Item ID: 13957 Contact: Austin Condition. Runs great. WOODS Saw ..................... 29 Baker ...................................... 5, 7 Menominee Item# 13848 Ph: (888) 401-6367 x703 Contact: Sam READY. Item ID 13545. Sam x702 Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Ph: (888) 401-6367 2001 Timberjack 460C -x702 This is a
Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26
& DRIVES
Timberjack 240 - InCarriage excellent 2010 Cardinal HD condition!(Sawmill) Well maintained with Carriages - Cardinal
453 detroit. of new carriage parts. Item Carriage lineLots it includes ID 13785. Sam x702 with onboard log turners, carriage
‘15 Cord King M44
Timberjack 380 Skidder - Tight Itemhyd ID:pac 13961 drive, for carriage, Contact: Austin machine.cab, Runs great. Low Hrs. sawyers computer controls,
Ph:owner. (888) Item 401-6367 x703 One ID 13468. Sam cabinet with electronic drives for x702 carriage knees, husk including
single arch with winch with only tires @ 90%, Counter Weight, 6 Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: 6800Timbco originalT425B hours.FB This is a very cylinder Cummins Diesel Engine. 1996 w/2008 Lumberman's Exchange ®Corley Mfg .............................. 32® Multitek ................................... 12 PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE 1916 low hour machine. Cummins 5.9 FOB:Okeechobee, FL. Item ID installed asP.O. wellBox as new master Rotosaw Intermittent Saw Head. Columbia, TN CUT 38402 YOUR DOWNTIME Piper's Saw Shop .................... CRD Metalworks .................... 25 engine has crack in it. non It can 13 be 13090. Sam x702 AND YOUR COSTS! cylinders. Very clean and tight Machine hasa 540 degree The Lumberman's Exchange is Rotochopper ............................ 40 CW Mill-ArmorHog .............. 17 loaded ontorotation a lowboy. would Timberjack 450C - Grapple machine. Item ID 13885. Austin Protection Against1994 Pinching, Crushing, Rubbingcontinuous & Abrasion on This upper. 9900
Timberjack 460Scorpion Grapple Skidder. 48" bottomand saw and 36" controls, top saw computer - This speed machine is an excellent added control. 2 sets of
Columbia, TN 38402. rights 1993 Timberjack 1010All Forwarder
newTimberline 4 cyl Perkins Engine, 1998 Stroke Delimber Major Overhaul of frame. 8400 hours. U/C out at 60%. Will crank
published monthly by Woods
x703 EVEN Publishing, P.O.–Box 1916,
UV RAYS!
Ite Con Ph
is an extremely accurate machine
Ph: (888) 401-6367 x703
B & B Mfg. ............................... 18
Sch Gr
is supported on both sides. This
‘14 CAT 535C AD SUBMISSIONS Hydraulic Lines – Fuel Hoses – Air Lines May be sent to Item ID: 13840 morris@lumbermens.co Contact: Sam Ph: (888) 401-6367 x702 POSTMASTER
bells and whistles, its a production
pressure guides. Top Casting wheel
PROTECT ALL ** Them INFO LINK** ® John Deere 640 Frick #1 Jumbo Mill Wrap With Pro-Tec-To Grapple Skidder
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
with 44 inch wheels, and all the
28000 feet a minute also has CLT presses. LUMBERMEN’S Item Equipment Digest 13971 Item ID ID: 13876. Austin x703 Lexington, Kentucky PO Box Austin 1146 Contact: http://www.kfia.org/ S& 125 Band Mill with Columbia, TNW(888) 38402-1146 Ph: 401-6367 x703 KentuckyWoodExpo.aspx 1-800-477-7606 Fax (931) 388-3564 Caterpillar generator - Low hours www.lumbermenonline.com on the mill, electronic computer Set 2004BUNYAN John Deere THE PAUL SHOW hours, 36” pads. It does have some works,1 1/2" or 2" band, 22ft. track Fri,648G 6 Oct -III Sun, 8 Oct small leaks. Owner is going back Cat 3406 140KW Genset, 12,400 Cambridge, Ohio Item ID: 13878 to rubber tired cutters because his www.ohioforest.org hours ready to run. Item ID 13434. Contact: Austin job has changed. Item ID 13898. Sam x702
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
Item ID: 13999 Contact: Austin feed deck 20 foot out feed deck Ph: (888) 401-6367 x703
it includes two sets of Mcdonough
Selma, North Carolina
CallLUMBERMEN’S (423) 698-0284 CORLEY
‘89 Cat D4H LGP
10 hours on this machine since it
that go up and down, with airbags,
Woods Publishing Single Machine or Complete Turn-Key Operation www.midatlantic-logging-biomass MID-ATLANTIC More Production Only& One Call ADVERTISING SALES& Profit isLOGGING expo.com/ BIOMASS EXPOAway Morris Woods For Parts, Service & Sales (888) 401-6367 ext. 704 KENTUCKY WOOD EXPO morris@lumbermens.co Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
Danckaert Band Resaw - Roughly has been rebuilt, it has a 24foot in
748GIII
Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers
Since 1986, Lumbermens has Log Turners • Bandmills & Linebar Resaw Systems published a monthly circular & Gang Edgers • Trimmers reaching sawmills,Board loggers, pallet makers, recyclers and industrial woodworking plants The Most Complete Line of Sawmill worldwide. Machinery Since 1905!
BANDMILLS & HEADSAWS
be great starter skidder withNew a20 new with new transmissiion and Both are Impervious to Oils Solvents. CWwinch, Mill-Hogzilla ................... 15 and Row Electric ............................ hours. New Undercarriage. engine. Item ID 13829. Sam x702 hydraulic pumps......................... Item ID 13826.35 Sawmill glass in cab. Very good running Dyna Products Exchange .................. 11
reserved. All editorial/ advertorial Maximum Protection forx702 Logging, 2005 460D Same thing Sam - submissions 16,000 Provides hours. running ForTimberjack TheRotosaw Distributor condition. has-360 degree areGood used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and for may Nearest You, Call as a John Deere 648GIII. Around 1997 Timberjack 240D - This condition. 6 wheeled. Tracks rotation. Cummins 6CT8.3 engine be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts 12000 Hours with newruns engine, skidder comes with 23.1 X 26 rear bogies and chains for front with 215 HP. Machine great. and space. Although all efforts have • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders The Paul Bunyan Show ......... 39 Hahn Machinery ...................... 3 been made to ensure accuracy of or Visit dual arch, with 77 X 44.00 tires at 95% rear and 30% front. tires. Item ID 13446. Sam x702 Working incomes select hardwood today. Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. Industrial ..... 10 Item 13548. x7021 new X 32 ID tires. 3 at Sam 60%Controls and one. New brake bands in winch and 14 Thomas 1993 380B PG Blades Highlift and Timberjack writers, the Lumberman's Delimbers • Dozer Exchange, its principles and 1997 Timbco 820C Clam Bunk Excellent skidder. Item ID good Engine Tree Trimmer, s/n CM4478, Ironcable. Bull ................................... Union Grove Saw & Knife ..13709. 2, 37 ® was rebuilt 221 Anywhere Hoses associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & Forwarder - “4000”................... original hours. Sam x702 Refiner years ago. Good strong running 22 Universal 5,152 Delivered NewProtection, in errorshours, orOffers omissions. Reproduction, Maximum Lower Costs, Reduced Kilgore Saw ............................. 23 Distributor Inquires Welcome in wholeDowntime part, is prohibited Lesswith Spills! machine. Item ID 13917. Sam x702 20.3 25 rubber at608B 70%.- Hand 2005x TImberjack This cutter 1995, Cabor with A/C,and 5 blades, Lignomat ................................. 24 WoodMizer ................................ l out written consent. andframe painted, brand has 10800 hours withnew a new 1998 Timberjack 360 Cable Skidder sanded 75 reach, Branton Winch,Publishing Push ©2017 Woods
800-355-1250
STACKING RAC
condition. Running daily!. IteminID tracks , all new Lexan. Located 13860. Sam x702 Customer will Alberta, Canada. ‘69 207 Timberjack cable pay shipping to closest USskidder entry This Machine has a Brand point. Item ID 13532. Sam x702
Transmission has been completely and run. Owner retired. Machine overhauled out ofItem frame. Reverse idle for past year. ID 13599.
box x702 also overhauled out of frame. Sam 1999 820D Clam Bunk Has Timbco a new Injector pump and all Forwarder - 10,300 new injectors. 25%hours. on tiresNew on it. engine thanChris 500 hours Item IDless 13283. x700 ago.
Can accept bunks, but- Put nonenew with ‘88www.BakerProducts.net 450B Timberjack machine. Owner has twoago, setsitofhas a 800.S48.6914 S73.663.7711 centerpins in 8I months
20 53
Ite Co Ph
track
addi
Sam
1999
11k h
engi
fresh 28L
dece
but c and
coul
bush
1321
2000
4-Ro
on m
engi
U/C
with
pum
new
cool
Pack
extra
undercarriage with less than a 1000 new eslking beams & new radiator. - This is an excellent skidder with Blade, 4X4, Firestone 67X34.00/26 - USED FORESTRY EQUIPMENT FOR SALE SELL YOUR EQUIPMENTTODAY TODAY ❘ 0 24/7 SUPPORT ❘ L! 1986 (888) 401-MENS 13 exch 401-MENS SALE ❘ l§ SUPPORT Issue 364 Lumbermens since ❘ List NO. seLL Issue 364
Lumbermens since 1986
❘
List seLL exchange buy save
❘
Lumbermensmagazine.com
3
. Just
r PT
ling
nch.
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology
Quality Brand Reg. U.S. Pat Off
‘93 Barko 180B Call 800 752-0627
Circular Saws ‘16 Halverson H140 Item ID: 14077 Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks Contact: Austin Skidsteer Circular Knives (DEMO) We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth
Ph: (888) 401-6367 x703 Carbide Tipped Saws Item ID: JW-909632 Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Contact: J Williams B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Saw Manufacturers Ph: (888) 401-6367Knife x701 Grinding Wheels, Saw Gumming Wheels & Knives.
‘1
Ite Co Ph
Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.
Every Reputable Wide Band Supplier Offers
3 High Quality Swedish Steel 3 3” – 8” Band Width 13428 Victory Ln.Gage // PO Box 124 3 16 to 20 Adams Center, NYOptions 13606 3 Double Cut 3 Choice of Swage or Stellite
WOLVERINE
BUT ONLY THE BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds Gehl 70 • The Industry’s Highest‘05 Band SawCTL Capacity Item ID: JW-986495 • Quick Delivery from our HUGE Inventory Contact: J Williams Ph: (888)Program 401-6367 x701 Fast Sharpening & Exchange ‘83•John Deere to Keep YOU Running 4850 • Competitive Pricing chain conveyer, 8 way splitter, on Item ID: 14073
20,000lb goose neck trailer. Item ID Contact: Austin And ONLY Menominee Gives You Everything 13916. Austin x703 Ph: (888) 401-6367 x703
You need in a WideBest Band Saw – Plus Value Portable Log Splitter Expert Service from the Industry’s Most with 1700 hours, in very good - Small manufacturer in PA has Knowledgeable Staff. condition. Easily produces high made the best valued log splitter. quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
Got a Wide Band Problem? drum design. Can easily load 42’ 13HP Honda motor. Manual start Call Menominee Saw Today and You’ll vans and produce 6 - 8 loads per but electronic option is available. Learn Why More Mills Trust the Pro! day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge EDGERS & GANGS
adjustable to single two way. Great
TOLL FREE in excellent condition. Runs great. Firewood Processor - This is a 1-800-582-0470 Item ID 13644. Sam x702 homemade processor with a 10’ Brewco Saws - Two Brewco Saws
Value! PA. Item ID 12062. Sam x702
16th St., Menominee, MIa 49858 FIREWOOD900 PROCESSORS log deck. Has hydraulic grapple, Tel: 906-863-2609 Fax: 906-863-1147 2010 Shop Built Wood Processor chain and kicker that all runs off Email: info@menomineesaw.com - It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks WWW.MENOMINEESAW.COM
inch insert tooth circle saw, 30 foot
B.H. Payne & Company, Inc.
P.O. Box 90608 EastKMC Point, GA2500 30364 ‘13 404 761-8711 Skidder Fax 404 761-5398
Track
Item ID: 14078 Contact: Austin “Since 1890” Ph: (888) 401-6367 x703
E-mail: info@paynesaws.com off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
‘04 Komatsu tach, oil pressure, water temp and WA500-3LK amp gauges. Cuts logs up to 16”.
low hours. Control panel includes
Item ID: 14048 Contact: Austin manuals and receipts. Purchased Ph: (888) 401-6367 x703 One owner and comes with all
new for $32,500. Item ID 13865.
Sam x702 rings LOGGING for wet weather. Item ID EQUIPMENT
13851. Sam x702 BANDIT
2004 JohnTracked Deere duel 1999 648GIII Bandit 1900 Disc arch skidder. Slick Machine. Chipper - Cat Under Carriage at
Runs good motor top notch 50% or better. 475 is hpinCummins condition. Item ID 13610. Sam x702 Diesel. 7500 Hours. One owner. 2004 John Deere 648GIII This Well maintained. Item ID- 13294. machine Sam x702has 13000 total hours on
the with only 3000 hours 2004body, Bandit Beast Model 4680 - on the new motor, comes with a set 3412 Caterpillar Diesel engine
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
1994 160B - Electric Web Barko Site: www.paynesaws.com knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
John Deere 440B
on injection pump. always started
Item ID: 14064 good. in good working order. 22in Contact: Austin kohing head. head works great. Ph: (888) 401-6367 x703 Item ID 13185. Sam x702
1999 Barko 160D - new engine with disc. Undercarriage 75%.Hour 9400 approximately 1500 at hours.
hours. Item work. ID 13796. meter dont The Sam last 2x702 owners 2005 John Deere 903G Feller have only used it to load trucks or Buncher - GN 22’’ continuous as a backup asRoy needed. Has a CTR saw head.grapple Heated has & A/C delimber, beencab. rebuilt. Standard boom. have Medium pads. Boom cylinders minor leaks. Operator, service, and parts books Item ID 13694. Sam x702
included. Item ID 13203.value Sam x702 94 Barko 275 - Excellent 2006 JD 2554 Processor with 624 with low at hours at 3,500. 5.9 Waratah ‘Super’ Processing Head. CUMMINS continuous grapple. 10500 hours. Item New ID pumps. Runs Great!. 13740.New Sam
of chains, working daily. Item with 850 HP. 5300 hrs. Mill in ID
engine. x702 New drive motors on head. Almost new BELLrails. New front
2004 Deere - This track Acre John clearing job,853G ready to work!
Runs great. owner!. Item ID a brand newOne Duetz engine. Lever
13878. Austin x703 good condition. Just finished 10
cutter is control. in excellent condition with Remote Big production
window. machine. 1990 Bell Super tight T - This Bell has
13550. control,Sam 33”x702 bar, pump and tranny
‘0 Tr Lo
Ite Co Ph
War
Com
1050 and
engi
driv
Alm
UC.
tigh
x702
2006
wor and and
hou
2006
hou
1388
2006
skid
supp
read
now
hou and
good
little
1393
2006 new 30” pads, pump, batteries and 2006 JD 2554 Processor with Issue 364 ❘ 386 List seLL exchange buy save ❘ LumbermensCO.com Model roatation on theLumbermens grapple w/ a ™ since 2006 1986 Tigercat 630C Grapple Issue 364 Lumbermens since 1986 ❘ List seLL exch 30’ reach on the boom. Joystick Skidder - Very good running
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
The Tree that Started it All!
Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
Woods Publishing
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR Excavator 330Lx Link Belt
EQUIPMENT REPS
bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough
is an extremely accurate machine
John Deere KENTUCKY WOOD648G3 EXPO Dual Grapple Skidder Fri, 15 Sept - Sat, 16 Sept Item ID: 74548 Lexington, Kentucky
in ve1y good condition, Cuts 130 feet a minute also has CLT presses.
Cat D6T XW Dozer
Item ID 13876. Austin x703 Item ID: 27832 S & W 125 Band Mill with
New "BUILT-RITE" Tumbler!
Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
FERY THE Contact: PAUL BUNYAN SHOW Email: Fery@lumbermensco.com (888) Fri,Phone: 6 Oct - 401-6367 Sun, 8 ext.705 Oct
Timberjack 380C
Cambridge, Ohio www.ohioforest.org
Item ID: 72259
Contact: WALKER Email: Walker@lumbermensco.com
New cutting edge, everything is in great working condition
on the computer Set except for mill, the winch.electronic Call for more pictures!
Phone: 888-401-6367 EXT 708 OR 702-875-2703 Cat 3406 140KW Genset, 12,400
hours ready to run. Item ID 13434.
** INFO LINK**
B & B Mfg ............................... 18 P.O. Box 1916 Phone: 888-401-6367 EXT. 707 Columbia, TN 38402-1916 B. H. Payne .............................. 16 (888) 401-6367
2007 Cat D6T XW dozer, approx 3,538 hours, hours will go
up. WINCH DOES NOT WORK, enclosed cab cold A.C. good Caterpillar generator - Low hours heat, new complete tracks and undercarriage (all cat parts)
Contact: MARK works,1 1/2" or 2" band, 22ft. track Email: Mark@lumbermensco.com
or (801) 699-8784
1994 Timberjack 380C Cable Skidder.... Has a strong 5.9 Cummins with a 6BT Austin Woods Transmission! The motor is a Reman at about 2000 hours. its sitting on 23.1's (888) 401-6367 ext. 703with a Strong John Deere winch. Brand new TRYGG chains to go with them that dont have more than a 100 hours on them... New batteries replaced austin@lumbermens.colast February starts on a Dime! Ready to go to work! Call for more info
MAILING ADDRESS
with 44 inch wheels, and all the
'87 CAT 518 Cable Skidder Sam x702 Item ID: 21141
CARRIAGES & DRIVES
1987 CAT 518 Cable Skidder. New 0 time overhaul on engine with warranty. 11026 frame hrs. ,1026 HD hrs. onCarriage trans. Very tight and 2010 Cardinal no leaks. One operator machine. New paint ,new firestones 14 ply. New batteries and starter, cat winch. All sheet metal straight. Carriages (Sawmill) - Cardinal New seat. Very strong skidder. All shields and tanks have locks.
CarriageEmail: line it includes carriage TED Teds@lumbermensco.com M&F Gauge .............................Contact: 28 Phone: 888-401-6367 EXT 701 or (801) 319-9351 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,
AD SUBMISSIONS OFTEN COPIED - NEVER DUPLICATED
May be sent to morris@lumbermens.co 11 HPWS WOODSPLITTER
Compact size yet heavy duty the 11 HPWS is ideal for most firewood operations. Towable from both ends, this machine can be pulled away from the woodpile and on the highway. The auto-cycle valve allows the cylinder to go out through the block and back on its own, giving you time to get your next block ready. The 4 way hydraulic wedge retracts down below the splitting beam, allowing you to split your really tough chunks 2 ways without the hassle of removing wedges.
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may beWith edited purposes of 11 clarity a fast 6for second cycle time the HPWS can split up to 4+ cords/hr., if your fast enough to feed it. and space. Although all efforts have FEATURES STANDARD OPTIONAL been made to ensure accuracy of Engine 13 H.P. Honda Gas Valves submitted Prince Auto-Cycle content by advertisers Cylinder Custom 4” w/3” Rod 5” Cylinder TwoLumberman's Stage andPump writers, the Stroke 24” 32”, 36”, 48” Exchange, its principles and6-Way, 8-Way, 10-Way Wedge 4-Way Wedge Height 12” associates, are not held liable for Separator Grate Welded to the Frame Miscellaneous Log Lift errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
11 SUPER WOODSPLITTER IFOnly WANT TO Sharpening HAVE .............. 26 carriage knees, husk including Brute Force Mfg .YOU ..................... 31 Midwest $ 48" bottom saw and 36" top saw 8,995! Buck Equipment ........ 36 Mor bark ..................................... 9 THE (AIM) FASTEST, STRONGEST Corley Mfg .............................. 32 Multitek ................................... 12 WOODSPLITTERS MADE, Saw Shop CRD Metalworks .................... 254’ Piper's diameter x 8’.................... barrel 13 THEN GO WITH drive, Power Pack available ............................ 40 CW Mill-ArmorHogHydraulic .............. 17 Rotochopper THE ORIGINALS. CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Compare—Dollar for Dollar Your Best Firewood Processing Option! We took the best features of the model 24 HPWS and 11 HPWS to give you a hybrid that dollar for dollar will outperform ANY woodsplitter on the market!
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
800-757-2520
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4750
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
STACKING RAC
East Hill Rd. Ludlow, VT 05149 • Industry high 15” main wedge w/starter wedge
• Extra Large Pushblock www.built-rite.com • 4 1/2” x 24” cyl.-3” Rod (same as 24 HPWS) • Fast 8.5 second cycle time Thomas Industrial Controls..... 10 info@built-rite.com • 4-Way Wedge Standard (6, 8, 10-Way Optional)
Iron Bull ................................... 21 Hill Union Grove Saw & Knife.. 2, 37 750 East Road
• Auto Cycle Valve • 500# Capacity Log Lift • 3+ Cords/Hr. • Tows from either end
Firewood Processors * Wood Splitters * Conveyors * More! Ludlow, 05149 Kilgore Saw ............................. 22 VT Universal Refiner ................... 23
www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l info@built-rite.com 800-757-2520 www.built-rite.com 800.S48.6914 I S73.663.7711
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 15
B U Y S
Donna Heninger
feed deck 20 foot out feed deck
is supported on both sides. This
Item ID: 70897 John Williams 2000 John Deere 648G3. Tire’s around 20%. 1 set of bear http://www.kfia.org/ paws that go with, 4300 hrs since motor and transmission (888) 401-6367 ext. 701 done. Winch new cable and sliders. woods ready. Call, text 2008 330 LX- Link Belt Excavator, bottom is 90% , KentuckyWoodExpo.aspx or email for more pictures. j@lumbermens.co hydraulic thumb, well maintained.
DESIGN DIRECTOR
10 hours on this machine since it
pressure guides. Top Casting wheel
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
Contact: TED Email: Teds@lumbermensco.com Morris Woods Phone: 888-401-6367 EXT 701 or (801) 319-9351 (888) 401-6367 ext. 704 morris@lumbermens.co
Danckaert Band Resaw - Roughly
H O T
ADVERTISING SALES
that was installed in October 2014. Installed a reman Cummins engine (purchased from Cummins) that now has only 1,694 hours on it. New “Heavy Duty” radiator was installed at the same time as the engine. Both rear-ends have been re-built. New suspension seat. Winch was rebuilt by Holt Equipment. 28L X 26 tires at 90%.
BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, Escanaba, Michigan pallet makers, recyclers and Timberjack 450C Grapple/ industrial woodworking plants Winch Item ID: 63798 MID-ATLANTIC LOGGING & BIOMASS worldwide. Single function grapple with Esco Grapple. Hass a Prolenc snubber
PUBLISHER
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
John Deere 548G3 Grapple Skidder Item ID: 61325 2014 548G3, one owner machine, excellent condition, 4,688.5 those are the original tires.. You can see how it's been treated its whole life Call for more pictures!
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
Prentice 210E Knuckle Boom Loader Item ID: 56625
‘16 Deloupe Halverson H140 Viking Trailer Item ID: 32415 Skidsteer (DEMO)
1998 Prentice 210E knuckle boom loader, has bucksaw hookups, new water pump, rebuilt knuckle bushing, turntable redone, rebuilt grape gear on turn motor, never ran delimber, good loader, been taken care of. Call for more pictures!
2001 Deloupe Viking trailer, 48' tri Axels, tires 70% Item ID: JW-909632 Plum for loader. call, text or email for more pictures Contact: J Williams and information.
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
Ph: (888) 401-6367 x701
Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784
‘93 180BTruck F800Barko Boom Bucket
Item ID:Item 14077 ID: 35784 Contact: Austin 1990 F800 bucket truck, runs good 35 boom is operating gives of 45 hight. have a new airframe canister but the Ph:a max (888) 401-6367 x703 one with a slight leak is operable, German turbo diesel made by bosh, short bed, low weight, only CSL required.
Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784
John Deere Tractor Item ID: 74808
This Tractor is basically brand new kept in the garage 20015/16 John Deere 5075E Four wheel drive, pre emissions, 240 Loader quick detach bucket and forks, 7' bush hog, bought brand new with tractor, enclosed cab, heat/AC, Stereo system
‘95 John Deere C6 Tree Farmer Contact: FERY Email: Fery@lumbermensco.com ID: 13920 Phone: (888)Item 401-6367 ext.705 or (801) 699-8784
Cat 320C Log Loader
Item ID: 41685
This machine is dry and center is tight, Pins and bushing in good shape, tires are 75% comes with chains, heat works, 13428 Victory // PO Box stereo works well maintained. Call,Ln. text or email for more pictures.
Item ID: 54026
2007 Cat 320 LL just over 15,000 hours, ev124 erything is in good working condition, selling Adams Center, NY 13606 because they’re shutting down their lumber yard. Call for more pictures! Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
John Deere 648G3 Grapple Skidder Item ID: 51014
H O T
B U Y S
John Deere 540G3
2004-05 John Deere 648G3 dual arch, direct drive, near new 30.5 tires on front/approx 50% tires on back, new hoses on arch, repacked 2 cylinders on book, new rotate motor, fixed exhaust, good heat, woods ready! Call for more pictures!
‘05 Gehl CTL 70
Contact: MARK Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 708 or 702-875-2703
Contact: J Williams Ph: (888) 401-6367 x701
‘83 John Deere 4850
Ponsse Bear 6 Wheel Proccessor Item ID: 18122
chain conveyer, 8 way splitter, on 2008 Ponsse Bear 6 wheel H8 head, big heavy duty 12-13 model Item ID: 14073 updated crane, machine has been through ponsse reconditioned program, approx 60 hours ago, comesneck with about $6k work of spare 20,000lb goose trailer. Item ID Contact: Austin bars, chains, hoses etc. Currently working. Selling to get out of note. 13916. Austin x703 Ph: (888) 401-6367 x703Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 708 or 702-875-2703
with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
Go Fast Run Around System in excellent condition. Runs great. ItemSam ID: 84282 Item ID 13644. x702
go fast run around head, in feed, out feed, andFIREWOOD run around, 480vPROCESSORS 3 phase electric Call for more info Built Wood Processor 2010 Shop MARK - Contact: It has a 353 Detroit diesel, 40
Email: Mark@lumbermensco.com Phone: 888-401-6367 708 inch insert tooth circleEXT saw, 30 foot OR 702-875-2703
Issue 364 386
Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Prentice 384 Knuckle Boom Skidder
& Delimber
BARKO
Contact: MARK Email: Mark@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708 or 702-875-2703
off onto a conveyor. This is a very
knuckleboom, 30' boom, 75hp
Sam x702
grapple, 5,000 original hours.
well built processor. Item ID 13820. Firewood Processor - This is a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes
748G3 John Deere tach, oil pressure, water temp and Item ID: 2757 amp gauges. Cuts logs up to 16”.
Brand new tires, comes with chains, Winch Machine has 15000 owner hours but Motor Tranny redone One andand comes with2,000 all hours, Good shape all lights work AC, radio . Call, txt or email for pictures and information.
manuals and receipts. Purchased Contact: FERY new for $32,500. Item ID 13865. Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 Sam x702 or (801) 699-8784
LOGGING EQUIPMENT made the best valued log splitter. BANDIT 360C1900 Grapple Skidder Handles logs up to 32”. Uses Timberjack 1999 Bandit Tracked Disc - Small manufacturer in PA has
13HP Honda motor. Manual start
Item ID: 63219 Chipper - Cat Under Carriage at
Has Log Lift. Uses 4-way wedge
Diesel. 7500 Hours. One owner.
Value! PA. Item ID 12062. Sam x702
Sam x702
but electronic option is
1998 Timberjack 360C grapple with winch, everything is in good available. 50%turbo or better. 475 hp Cummins working condition, was rebuilt a couple years ago Call for more pictures!
adjustable to single two way.
Contact: MARK Email: Mark@lumbermensco.com 888-401-6367 EXT 708 Item or 702-875-2703 GreatPhone: Well maintained. ID 13294.
Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all
unit. Has a 4’ chain saw that
Lumbermens™ since 1986
❘
2004 Bandit Beast Model 4680 -
Hurdle Sawmill Setup 3412 Caterpillar Diesel engine Item ID: 32313 with 850 HP. 5300 hrs. Mill in
Hurdle 2 headlock, 3 phase can operate at 240 or 480, 200 HP 56" blade, cab, carriage,Just hydraulic/chain log 10 turner, runs electric off motor,good condition. finished log deck Call for more pictures!
of a 4 cylinder Mercedes power
Item ID: 49732
Item ID: 14078 Prentice 384 knuckle boom loader with delimber, approx 8k hours, Contact: Austin completely dry,capacity!. straight, tight machine, everything is inSam good working Item ID 13421. x702 AC is good and cold, backup machine, truly woods ready. Ph: (888) 401-6367 x703 condition, Call for more pictures!
Acre clearing job, ready to work!
Contact: MARK Email: Mark@lumbermensco.com 888-401-6367 EXT 708 or 702-875-2703 Remote control. Big production kicks Phone:
List seLL exchange buy save
motor, Rotobec continuous
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
Peterson on injection pump.Chipper always started Item ID: 52045 good. in good working order. 22in
This 2015 Peterson is in great condition, 3100hrs, new belly
kohing head. headwarranty works great. and feed chains, C18 platinum till 2020. The 4300B is powered by a 765 horsepower (570 kW) C18 Caterpillar
engine. ID At 52,000 pounds The 4300B is a high production Item 13185. Sam x702 chipper whose dimensions do not require any oversize
permits for road transportation. 1999 Barko 160D - new engine with
Contact: FERY 1500 hours. Hour approximately Email: Fery@lumbermensco.com
Phone:dont (888) work. 401-6367 ext.705 meter The last 2 owners or (801) 699-8784
have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
2054continuous John Deere CUMMINS grapple. Processor Log Loader
Runs Great!. Item ID 13740. Sam Item ID: 73244 x702
This 2054 John Deere has 30100 hours new engine has less then 1000, a 2006 Waratah 662B head on it, a new Intercooler, undercarriage is 50% and A/C works. call, text or email for more pictures.
BELL
1990 Bell Super T - This Bell has
FERY Duetz engine. Lever aContact: brand new Email: Fery@lumbermensco.com
Phone: (888) ext.705 control, 33” 401-6367 bar, pump and tranny or (801) 699-8784
❘
LumbermensCO.com
** CALENDAR**
FOR CLASSIFIEDS Timberjack 230 Cable Skidder
Item ID: 51788 Call 888.401.MENS 1979 Timberjack 230 Cable Skidder. Excellet condition, Excellent See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS tires. Eaton Winch, Straight Blade. Call for more pictures. Fri, 18 August - Sun, 20 August Location of all equipment at Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 CMI C400L Crawler Forestry Mulcher Boonville, New York www.LumberMB\ISmagazine.com Item ID: 88634 www.starwebhosting.net/woodsmen/
2013 John Deere 437D Item ID:Tree 96805 The
that Started it All! Contact: AUSTIN
5200 hours. Serviced every 250 hours. Comes with CTR bucksaw. Hasn’t been used for delimbing much.
Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703 published 931-797-8029 a monthly circular
BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Komatsu PC290LC Loader Danckaert Band Resaw - Roughly Item ID: 94744 Fri, 25 August - Sat, 26 August
2018 CMI C400L Crawler, 196 hours John Deere 6090HF engine, tier 3, 400 HP 4 pump hydraulic system Attachment - 1 piston pump Track 2 - 2 piston pumps Axillary function - 1 gear pump Filtration - 10 micron screens on share pumps 25 micron screens on all other pumps & motors Electrical - 12 volt Standard light package Undercarriage D4 type, 30" single grouser pads Back up camera FAE 300/U-225 Universal forestry mulcher Engine warranty thru 03/16/20 or 2000 hrs Purchased by a pipe company that planned on taking on the clearing side as well, decided to focus on what they do most. Call for more pictures!
Hot Springs, Arkansas www.arkloggers.com
10 hours on this machine since it
2018 Komatsu PC290LC loader/excavators, equipped with rotobek hotsaw head, comes with bucket as well fully loaded machine heat, rebuilt, it has aPurchased 24foot by ina air, everythinghas is in been excellent working condition. pipe company that planned on taking on the clearing side as well, feed deck 20 foot out feed deck decided to focus on what they do most of. Call for more pictures!
72ND ANNUAL GREAT LAKES with 44 inch and all the LOGGING & HEAVY EQUIPMENT EXPO Contact: MARK Email:wheels, Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
reaching sawmills, loggers, Escanaba, Michigan with air strain conveyers pallet makers, recyclers and2003 Tigercat 250 Log Loader Morbark machine, 40/36 Whole Tree Chipper on Tracks that Item go up ID: and35082 down, with airbags, industrial woodworking plants Item ID: 46268 MID-ATLANTIC LOGGING & BIOMASS worldwide. Has super hot saw and bucket plumbed to run a slasher... NCL Tracked, it 705includes hours Cat C18 tiersets 2 diesel HP) 36" x 43two of (765 Mcdonough
PUBLISHER
Woods Publishing
Right at 10,000 hours! Rock solid ready to work! Call forFri, 15 Sept - Sat, 16 Sept more info. Selma, North Carolina
MID-ATLANTIC WALKER ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Walker@lumbermensco.com
Morris Woods Phone: 888-401-6367 EXT 707 (888) 401-6367 ext. 704 morris@lumbermens.co John Williams (888) 401-6367 ext. 701 j@lumbermens.co
DESIGN DIRECTOR Donna Heninger
7100 hours, new undercarriage, new saw motor, hydraulic pumpsAustin and driveWoods pumps have been gone through.
(888) 401-6367 ext. 703 austin@lumbermens.co Contact: AUSTIN
Email: Austin@lumbermensco.com ADDRESS Phone:MAILING 888-401-6367 EXT 703 931-797-8029 P.O. Box 1916
is an extremely accurate machine
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15Tigercat Sept - Sat,630C 16 Sept
feet a minute also has CLT presses.
Lexington, Kentucky Item ID: 83971 http://www.kfia.org/ 2004 Model has brand new crate motor professionally installed. 30.5 primex tires with excellent tread. Tight KentuckyWoodExpo.aspx
S & W 125 Band Mill with
center section, new AC.
Caterpillar generator - Low hours
Contact: THEAUSTIN PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct EXT - Sun, 8931-797-8029 Oct Phone: 888-401-6367 703 OR
works,1 1/2" or 2" band, 22ft. track
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall Timbco 425Exl (888) 401-6367 ext. 702 Item ID: 84253 sam@lumbermens.co
www.midatlantic-logging-biomass expo.com/
Serco 170A Self Propelled Loader Item ID: 57111
** INFO LINK**
JD motor was completely overhauled, new pumps, new drive motor, new hydraulics. Work ready. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Item ID 13876. Austin x703
on the mill, electronic computer Set Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Log Max 7000 Sam x702 Item ID:& 96628 CARRIAGES DRIVES
In Pennsylvania. wear 2010 CardinalMinimal HD Carriage Contact:(Sawmill) AUSTIN - Cardinal Carriages Email: Austin@lumbermensco.com Phone: line 888-401-6367 EXT 703 Carriage it includes carriage 931-797-8029 with onboard log turners, carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7 Item ID: 8121
Menominee Saw ..................... 29
May be sent to Cable Skidder, 8,000 hours on a rebuild. Has 5.9 Cummins with27 a Bell's Machining ..................... 6 speed power shift transmission. New pins just installed not too morris@lumbermens.co
Metal Detector's Inc. .............. 30
Item ID: 84473 cabinet with electronic drives for
long ago. ReadyBrute to pull Wood. Call for more info! Force Mfg . ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Contact: Buck WALKER Equipment (AIM) ........ 36 Send address changes to: Email: Walker@lumbermensco.com Lumberman's ExchangePhone: 888-401-6367 EXT 707 Corley Mfg .............................. 32 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25
Multitek ................................... 12
Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS POSTMASTER
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have 83’ John Deere 740A been made to ensure accuracy of Item ID: 95074 content submitted by advertisers Very starts at 0 degrees with no anddependable writers,skidder, the Lumberman's assistance. Big winch, 25.5x32 tires. 4 new chains. ReExchange, principles and man engine with its low hours. Tight center section, doesn’t associates, held liable for burn any oil. Veryare cleannot skidder despite its age. errors or omissions. Reproduction, Contact: in whole orAUSTIN part, is prohibited with Email: Austin@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 703 931-797-8029 ©2017 Woods Publishing
1998 Timberjack 360
drive, hyd pac for carriage,
2017 Tigercat 630E sawyers cab, computer controls,
2400 hours in excellent condition.
Contact: AUSTIN 48" bottom saw and 36" top saw Email: Morbark ..................................... 9 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Piper's Saw Shop.................... 13
Rotochopper............................w/Tier 40
CW Mill-Hogzilla ................... 15
Row Electric ............................2014 20 with
Dyna Products ........................ 35
Sawmill
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery 3 2007 Cat...................... 517 Item ID: 60554 Hurst Boiler ............................. 14
The Paul Bunyan Show ......... 39
Equipped with 30” pads, fully enclosed cab, 6 way blade. Equipped with winch. Meticulously maintained. In excelIron Bull ................................... 21 lent condition inside and out.
Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. Phone: 888-401-6367 EXT 70324 931-797-8029
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
STACKING RAC
720E Tigercat Feller Buncher 3 Engine Item ID: 44546
CW Mill-ArmorHog .............. 17
only 3000 hours, everything has been extremely well maintained. Valves adjusted every 1000 hours, regular oil changes. Machine runs like its brand new, tight, no leaks, everything works on Exchange ..................it.11 Tires all over 50%. Has a Tigercat 5702 log head. One of the last 3 machines sold with a tier 3 engine.
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
Thomas Industrial Controls..... 10
Cat D5H LGP Item ID: 64808
Union Grove Saw & Knife.. 2,1999 37 model with 34” pads and winch. 8000 frame hours. New undercarriage. Located in Kentucky
Universal Refiner ................... 23
Contact: AUSTIN
Email: www.BakerProducts.net WoodMizer ................................ l Austin@lumbermensco.com Phone: 888-401-6367 EXT 703I OR 931-797-8029 800.S48.6914 S73.663.7711
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 17
L O G G I N G
MARKETING DIRECTOR
1/2" ADV 3 Drum, 8 knife 30" diameter to feed roller 320L Cat undercarriage with 3 WDH-120 chains Straight discharge chute with pressure guides. Top wheel hydraulic operated chip deflect w/horizontal andCasting vertical adjustment Saylor-beall 11HP Honda air compressor Cat standard engine warranty thru is 03/21/20 or 3000 hrs Cat platinum plus coverage supported on both sides. Thisthru 03/21/23 or 5000 hrs Call for more pictures!
'70 Allis Chalmers HD6 Dozer
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
“Precision Under Pressure”
Item ID: 60357
"70 Allis Chalmers HD6 Dozer w/$6,000 in spare parts. Argo winch works good. Can hand 200 ft. of 3/4" cable. 10' blade. Manual blade and transmission. Button on side of winch. UC 80%. Needs the generator swapped out for an alternator. Motor was rebuilt about 6 yrs ago. It is a 4 cylinder Allis engine. Call for more pictures.
Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
KMC 210 Grapple Dozer w/Winch
Skidder Dozer
‘16 Halverson H140 Skidsteer (DEMO) Item ID: 71870
Item ID: 67293
Item ID: 14077 Item ID: 54571 Contact: Austin 210 Engine runs good, everything is in good working conPh: (888) 401-6367 x703 dition, undercarriage about 50% bushings good, pads are
314 CTR Delimber
KMC 210 Grapple machine with winch, everything is in good working order. Selling because he recently upgraded to a Cat D5H TSK Call for more pictures, info, and video!
Itemalso ID: John Deere engine, hasJW-909632 ground saw attached to it.
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Phone: 888-401-6367 EXT 703 OR 931-797-8029
KMC 210180B Cable ‘93 Barko
worn but still have probably 1000 hours on them, great for wet terrain. Call for more pictures and video!
Contact: J Williams Contact: AUSTIN Ph: (888) 401-6367 x701 Email: Austin@lumbermensco.com
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
John Deere 437D Item ID: 10075
‘95 John Deere C6 Tree Farmer 2009 2384 Prentice
13,000 frame hours, Never delimbed in its life. Work ready Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
CMI C400L Crawler Stump Grinder
L O G G I N G
Item ID: 93961
‘13 KMC 2500 Track Skidder648 HTC Skidder 2010 Timberjack
2018 CMI C400L crawler, 121 hours John Deere 6090HF engine, tier 3, 400 HP 4 pump hydraulic system Attachment - 1 piston pump Track 2 - 2 piston pumps Axillary function - 1 gear pump Filtration - 10 micron screens on share pumps 25 micron screens on all other pumps & motors Electrical - 12 volt Standard light package Undercarriage D4 type, 30" single grouser pads Back up camera HD PO CMI Stump 13428 Victory Ln.S400// Box 124 Grinder Engine warranty thru 03/15/20 or 2000 hrs Purchased by a pipe company that planned on taking on the Adams Center, NY 13606 clearing side as well, decided to focus on what they do most of. Call for more pictures!
Item ID: 57023
Item ID: 14078
New center pins, 6 new injectors, replaced the harmonic Contact: Austin balancer, has 9777 hours. The machine has been very well Ph: (888) 401-6367 maintained, tight and ready to get to work. x703 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
off onto a conveyor. This is a very
Clark 667
Item ID: 59500
CLARK Esco 112 swing grapple, Cummins 6bt engine, Studded Chains, Brush blade, Winch Machine is running good. text or email for more pictures.
‘05 Gehl CTL 70
Contact: FERY Email: Fery@lumbermensco.com Item ID: JW-986495 Phone: (888) 401-6367 ext.705 or (801) 699-8784
Contact: J Williams Ph: (888) 401-6367 x701
‘83 John Deere 4850
Timberjack 230 Cable Skidder
Item ID: 51788 chain conveyer, 8 way splitter, on Timberjack 230 Cable Skidder. Excellet condition,
1979 Item ID: 14073 Excellent tires. Eaton Winch, Straight Blade. Call for more Contact: Austin pictures. 20,000lb goose neck trailer. Item ID 13916. Austin x703 Ph: (888) 401-6367 x703Contact: TED Email: Teds@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 701 or (801) 319-9351
with 1700 hours, in very good
- Small manufacturer in PA has
condition. Easily produces high made the best valued log ID: splitter. 2003 CAT 525B Item 3800
quality chips with patented ‘Cone’ logs up Uses This SkidderHandles has approx 12,000 hourstoon32”. it. Strong motor and
transmission. Center section and blade are tight and in good condition. Has 42,000lb CAT Brand winch. Heat and AC work. The drum design. Can easily load 42’ 13HP Honda motor. Manual start only thing wrong with this skidder is the Grapple pins are loose. Other than that it’s Ready to work! Call for more info. vans and produce 6 - 8 loads per but electronic option is available.
day. Item ID 13882. Austin x703
Has Log Lift. Uses 4-way wedge
Brewco Saws - Two Brewco Saws
Value! PA. Item ID 12062. Sam x702
Contact: WALKER Email: Walker@lumbermensco.com adjustable to single two way. Great Phone: 888-401-6367 EXT 707
EDGERS & GANGS
in excellent condition. Runs great. Item ID 13644. Sam x702
Firewood Processor - This is a 2005 Valmet 840.2 Forwarder homemade processor Item ID: 66330 with a 10’
FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, New transfer installed, pumps have been rebuilt, Rear end
2010 Shop Built Wood
boggy bearings replaced, in rear have been replaced. Processor chain andSeals kicker that all runs off Machine comes with spare rim, and parts bucket w/ 360 super grip. 20190 Hour
- It has a 353 Detroit diesel, 40 inch insert tooth circle saw, Issue 364 386
of a 4 cylinder Mercedes power
MARK 30Contact: foot Phone: unit. HasEmail: a 4’ Mark@lumbermensco.com chain saw that kicks 888-401-6367 EXT 708 or 702-875-2703
Lumbermens™ since 1986
❘
Item ID: 13920 Loader Knuckleboom Contact: Austin Item ID: 83019 Ph: (888) 401-6367 x703 This machine is set on a hydraulic trailer with
a 426 delimber and CTR groundsaw. 2 years ago the machine got new pins, bushings and knives. The swing motor was rebuilt as well as the hydraulic pump. Bushings and pins were replaced on the boom. This machine has no capacity!. IDis13421. leaks, workingItem A/C, and ready toSam get tox702 work.
BARKO
Contact: MARK Email: Mark@lumbermensco.com
1994 Barko 160B - Electric Phone: 888-401-6367 EXT 708
702-875-2703
knuckleboom, 30' boom, 75hp
motor, Rotobec continuous Zaxis 200 Forestry Tracked Loader
well built processor. Item ID 13820. Sam x702
Item ID: original 20426 hours. grapple, 5,000
Hitachi- Zaxis 200 Forestry 17,248 hours Item EngineID rebuilt at (excellent condition.). 13,000 11’ 2” w/28” pads 36’ reach boom 48” cab riser 52” Rotobec grapple w/live heel Similar to John Deere 2154 13238. Chris x700 Call for more pictures
Firewood Processor - This is a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
1995 Barko 775 B Feller Buncher
Contact: MARK Email: Mark@lumbermensco.com - Pumps recently redone. 400 hrs Phone: 888-401-6367 EXT 708 or 702-875-2703
low hours. Control panel includes
on injection pump. always started
amp gauges. Cuts logs up to 16”.
Item ID: head 44852 kohing head. works great.
good. in good order. 22in tach, oil pressure, water temp and John Deere 650 working G LGP Dozer ItemForestry ID 13185. x702 One owner and comes with all’98 650 G LGP Dozer. package, Sam winch, log arch, risers, screens.
Pedal steer. 6-way blade. 3,935 hours. UC 70%. Bushings and pins
around 500 hours. Brand new Idler on right-side. Good machine, ready 1999 Barko 160D new engine with manuals and receipts. Purchased to work. Call for more pictures.
new for $32,500. Item ID 13865. Sam x702
approximately 1500 hours. Hour
Contact: TED Email: Teds@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 701 or (801) 319-9351
LOGGING EQUIPMENT BANDIT
have only used it to load trucks or
1999 Bandit 1900 Tracked Disc
delimber, grapple has been rebuilt.
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294.
2014 Vermeer WC 2300XL Sam x702 Item ID: 99024 2004 Bandit Beast Model 4680 -
Whole Tree Chipper. 1500 hours. CAT C13 engineCaterpillar with 440 HP,Diesel runs and starts well., 3412 engine strong hydraulics. Chipper features wireless remote, smart and 23"Mill capacity with 850 HP.feed 5300 hrs. in drum style chipper. Machine is in good shape. Feed chain in good order. Includes extra knives. good condition. Just finished 10 Contact: MARK job, ready to work! Acre clearing Email: Mark@lumbermensco.com Phone: 888-401-6367 708 Remote control. BigEXT production 702-875-2703
List seLL exchange buy save
as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
TimberjackBELL 460 Dual Arch
Item ID: 91657 1990 Bell Super T - This Bell has
FERY Duetz engine. Lever aContact: brand new Email: Fery@lumbermensco.com
Phone: (888) ext.705 control, 33” 401-6367 bar, pump and tranny or (801) 699-8784
❘
LumbermensCO.com
** CALENDAR**
Cat 232D Skid Loader
Cat 525C Grapple Skidder
FOR CLASSIFIEDS Item ID: 39708 Call67hp, 888.401.MENS Joystick controls, dealer maintained, no leaks, OROPS, needs nothing, woods or farm ready, manual 2010 Cat 525C grapple skidder with winch, approx 11,100 bucket release,See no attachments included hours, 30.5 tires, good skidder, currently working. CallSTATE for pictures, prices, and NY WOODSMEN'S FIELD DAYS more pictures! Fri, 18 August - Sun, 20 AugustContact: WES Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Email: Wes@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 710 OR 260-452-6055 Item ID: 47830
www.starwebhosting.net/woodsmen/
The Tree that Started it All!
BANDMILLS & HEADSAWS 1997 Timberjack 460 Cable Skidder John Deere 540G3 SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly ItemBand ID:24393 Fri, 25 August - Sat, 26 August
Item ID: 92115
Hot Springs, Arkansas www.arkloggers.com
2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.
10 hours since it Bunch of work put intoon thethis topmachine end of motor in July.... has 11,350 hours all together. working until sold. Call for more info! has been rebuilt, it has a 24foot in
deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Contact:feed WALKER Email: Austin@lumbermensco.com Email: Walker@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029
Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Woods Publishing
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
Timbco 425B
Phone: 888-401-6367 EXT 707 bells and whistles, its a production
machine, with air strain conveyers
Gehl R220 Skid Loader
that go up and down, with airbags,
Item ID: 28551 MID-ATLANTIC LOGGING & BIOMASS it includes twovisible sets of (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs Brand new tires (stamp still in Mcdonough tread) hydraulic ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept quick-connect/disconnect, 72hp, 2-speed, no leaks, dealer Item ID: 74779
guides. Top with Casting wheel maintained, pressure ready to work., drive levers foot controls, Selma, North Carolina no attachments included, 1 dump cylinder pin has a little play www.midatlantic-logging-biomass is supported on both sides. This Contact: WES Email: Wes@lumbermensco.com expo.com/ is an extremely accurate machine
owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.
JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
Phone: 888-401-6367 EXT 710 OR 260-452-6055
in ve1y good condition, Cuts 130
feet a Deere minute 550G also has CLT presses. John Dozer
John Williams http://www.kfia.org/ (‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx j@lumbermens.co fully plated. Excellent conditions, turn-on ready!
S &dozer, W caged 125 cab, Band John Deere 550G 6 wayMill blade,with 22" pads, strong motor, good transmission, tracks/undercarriage approx 90% Call for more Caterpillar generator - Low hours pictures!
BARKO 495ML
MARKETING DIRECTOR
DESIGN DIRECTOR Contact: JOE Donna Heninger
Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
P.O. Forwarder Box 1916 Valmet
Lexington, Kentucky
Item ID: 33905
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
** INFO LINK**
ID: 85744 Item Item ID 13876. Austin x703
the mill, electronic computer Set Contact:on MARK Email: Mark@lumbermensco.com works,1 or or 2"702-875-2703 band, 22ft. track Phone: 888-401-63671/2" EXT 708 Cat 3406 140KW Genset, 12,400
hours ready to run. Item ID 13434. Tree Farmer Grapple - Cable Sam x702 Skidder Item ID: 37092
CARRIAGES & DRIVES
Hrs. unknown, but has not been used a lot. Pins and everything tight. Starts very easy even in cold weather without ether. Very 2010hydraulic Cardinal HD fuel efficient. Small leak. 23 X 32 Carriage tires. Set of almost new chains. Has owned it for 4 -5 yrs.
Carriages (Sawmill) - Cardinal
Contact: TED Email: Teds@lumbermensco.com Carriage line it includes carriage Gauge .............................Phone: 28 888-401-6367 EXT 701 or (801) 319-9351
B & B Mfg. ............................... 18
M&F
B. H. Payne 16 Item.............................. ID: 87930
Meadows Mill, Inc. ................ 33
2004 Valmet 860.1 Forwarder, 8 wheel, 18000 hours, wellAD maintained, good condition. A SUBMISSIONS set of 5/8” diamond back studded chains, May be sent to no tracks. All hydraulic pumps were rebuilt
(‘09) (9.5K hrs) U/C at 80%. Head is the 40 degrees Baker ...................................... 5,33”7 Timbco barsaw head. Cummins 8.3L engine. Needs nothing!
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Contact: POSTMASTER MARK Email: Mark@lumbermensco.com Send888-401-6367 address changes to: Phone: EXT 708 702-875-2703 Lumberman's Exchange
Contact: JOEMfg. ..................... 31 Brute Force Email: Joe@lumbermensco.com Buck Equipment (AIM) Phone: 888-401-6367 EXT........ 70936 801-362-2170 Corley Mfg .............................. 32
Midwest Sharpening.............. 26
carriage knees, husk including
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
Columbia, TN 42041 38402-1916 Item ID: (888) 401-6367
morris@lumbermens.co
P.O. Box 1916 Columbia, TN 38402
Timbco 445 EXL
Vermeer SC372 Stump Grinder
ID: 15150 .............. 17 The Lumberman's Exchange is CWItem Mill-ArmorHog published monthly by Woods 2016 Vermeer SC372 stump grinder, 85 hours, like new condition, diesel CWresidential Mill-Hogzilla ................... 15 engine, fits through gates, comes with extra sets of teeth. Publishing, P.O. Box 1916, Landscaper was going to get into stump grinding but too busy. Call for more Columbia, TN 38402. All rights pictures! Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: MARK submissions are used at the Email: Mark@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and mayPhone: 888-401-6367 EXT 708 or 702-875-2703 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Franklin Q80 Grapple Skidder content submitted by advertisers Item ID: ............................. 55955 Hurst Boiler 14 and writers, the Lumberman's 2003 Franklin Q80 grapple skidder with winch, approx 13k hours, tight pins Exchange, its principles and and bushings all around, arch,................................... new 5.9 Cummins approx 20 hours ago, Iron dual Bull 21 associates, are not held liable forused very lightly the last 4 years, used for hauling utility poles the majority of its life. Excellent machine Call for more pictures! errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: MARK in whole or part, is prohibited with Email: Mark@lumbermensco.com Lignomat 24 out written consent. Phone: 888-401-6367................................. EXT 708 or 702-875-2703 ©2017 Woods Publishing - USED FORESTRY EQUIPMENT FOR SALE SALE ❘
Morbark ..................................... 9 Multitek ................................... 12
Hood 28000
Rotochopper ............................ 40 Item ID: 18775 Row Electriccarrier ............................ 20 Self propelled equipped with slasher saw, working daily.
Sawmill Exchange .................. 11 Contact: AUSTIN
Email: Sawmill Austin@lumbermensco.com Select ......................... 19 Phone: 888-401-6367 EXT 703 931-797-8029
Smith Sawmill ........................... 4
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
JD 548D Grapple Skidder Item ID: 8230
1989 John Deere 548D grapple skidder, decent main line, centers are good, new winch drive shaft 6 months ago, new head gasket and injectors about a year ago, front drive shaft, pinion, and u joints new. 28L tires. Selling because can’t haul it on a gooseneck trailer. Call for more pictures and a short video!
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
The Paul Bunyan Show ......... 39
KMC 2400 Grapple/winch Item ID: 83802
Thomas Industrial Controls..... 10
Union Grove Saw & Knife.. 2,2015 37
KMC 2400 single arch grapple with winch 950 hr. Undercarriage 75%. Strong tight and sound.
Universal Refiner ................... 23
Contact: TED
Email: Teds@lumbermensco.com www.BakerProducts.net WoodMizer ................................ l 888-401-6367 Phone: EXT 701 or (801) 319-9351 800.S48.6914 I S73.663.7711
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 19
L O G G I N G
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Tigercat 630 C Dual Arch
Cat D4C LGP Forestry Dozer
“Precision Under Pressure”
Phone 315.284.4126Item ID: 99373 Fax 1993 Cat D4C LGP forestry dozer, good winch/strong winch, rails and pads 315.849.2045 are 40%. New rollers and idlers 130 hours ago. All fluids and filters where changedWebsite 130 hours ago. New batteries, alternator, fan belt, and starter all new. Clean straight machine, everything works as it should. Will walk on www.empirehyd.com water! Call for more pictures! Email info@empirehyd.comContact: MARK
Item ID: 10836
2004 Tigercat 630 C Dual arch w/winch.13,xxx hours. Rear tires are 80% Front 40% Hours will continue to go up as it is on the job and working as weather permits. Call for videos Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
‘93 Barko 180B
Tracked Feller Buncher ‘16 Halverson H140CAT 522B Item ID: 14077 Item ID: 31272 Contact: Austin Skidsteer (DEMO)
VALMET 840.2 FORWARDER Item ID: 9770
401-6367 x703 2016 Cat 522BPh: 1437 (888) hours, 2900 intermittent head, cold weather Item ID: JW-909632 starting package, 28” tracks, self leveling cab, fire suppression system, tracks undercarriage approx 90% Call for more info Contact: J Williams Ph: (888) 401-6367 x701 Contact: MARK
2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
Log Loader/ Excavator 225 LC Item ID: 51519
‘95 John Deere C6 Contact: FERY Tree Farmer Email: Fery@lumbermensco.com
1986 Caterpillar excavator with a 3208 engine 5000 hours, total hours is 19000, Grapple, heals, bucket.
Phone: (888)Item 401-6367 ext.705 or (801) 699-8784 ID: 13920
L O G G I N G
Timberpro 620 Item ID: 79674
Tigercat T240B Item ID: 4266
13428 Ln.hours. // PO Box 124 2002 model withVictory 5300 original 8.3 liter 2006 model with 10,500 hours, has all new hoses, along Cummins engine. Excellent condition. Adams Center, NY 13606 with all repacked cylinders. In excellent condition. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
‘13 KMC 2500 Track Skidder
Contact: Austin Ph: (888) 401-6367 John Deere 648E x703
Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703
model in excellent condition, every bushing are new. Has not been in the capacity!. Item worth ID 13421. Sam done! x702 since having $20k of work
off onto a conveyor. This is a very
knuckleboom, 30' boom, 75hp
Sam x702
grapple, 5,000 original hours.
a Chomper Model 16 PDA
‘05 Gehl CTL 70
Item ID: 28889
automatice firewood processor
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
with John Deere power unit with
low hours. Control panel includes
Cat 508 Cable Skidder tach, oil pressure, water temp and
2016 Barko 495 Item ID: 51788
2500 conveyer, original hours, in excellent chain 8 way splitter, on condition.
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 with 1700 hours, in very good
20,000lb goose neck trailer. Item ID Contact: AUSTIN 13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter 931-797-8029 - Small manufacturer in PA has
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
condition. Easily produces high
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
John 548G2 Brewco SawsDeere - Two Brewco Saws Grapple Skidder
in excellent condition. Runs great. Item ID: 34791
Item ID 13644. Samskidder, x702excellent condiJohn Deere 548G2 grapple
FIREWOOD PROCESSORS
tion, regular maintenance, 28L’s, good strong winch, tight centers, dry, no leaks, excellent condition, straight, ready for the woods! Call for more pictures!
2010 Shop Built Wood Processor MARK -Contact: It has a 353 Detroit diesel, 40 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot 702-875-2703 Issue 364 386
made the best valued log splitter.
Item ID: 84481 amp gauges. Cuts logs up to 16”.
Cat 508 cable skidder, 10,379 hours, great mainte-
nance,owner 23.1’s 80%and all around, goodwith strongall cat winch, One comes right centers, just pulled of job, work ready skidder! Call for moreand pictures! manuals receipts. Purchased
Contact: MARKItem ID 13865. new for $32,500. Email: Mark@lumbermensco.com Sam x702888-401-6367 EXT 708 Phone: 702-875-2703
LOGGING EQUIPMENT BANDIT540D 1988 John Deere
1999 Bandit 1900 Tracked Disc Item ID: 727
Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage
but electronic option is
transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.
Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Sam x702
2004 Bandit Beast Model 4680 -
2008 Barko 495 ML
3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all
it is a tight and dry machine. runs Owner off statesgood condition. Just finished
10
Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com
Remote control. Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR
Lumbermens™ since 1986
❘
motor, Rotobec continuous
(excellent condition.). Item ID
Firewood Processor - This is
ItemPrentice ID: 14073 2190
BARKO
Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029
well built processor. Item ID 13820.
‘83 John Deere 4850
Item ID: 6603
List seLL exchange buy save
13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in 1991 Timberjack 450B Item ID:works 1826 great. kohing head. head
New ID pins13185. & bushings. Tight skidder all Item Sam x702 around. Ready to drag some wood.
1999 Barko 160D - new engine with Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners 931-797-8029 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
John Deere 650G
Runs Great!. Item 13740. Sam Item ID:ID 30113
x702 1995 650G LGP, 6558 hours, 500 hours on new C
BELL
frame, pins, and bushings, new arm rests, tracks and undercarriage approx 80% or better, regular maintenance, dry. Call for more pictures!
1990 Bell Super T - This Bell has MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com Phone:33” 888-401-6367 EXTtranny 708 control, bar, pump and 702-875-2703 ❘
LumbermensCO.com
** CALENDAR**
2001 John Deere 435 Item ID: 7100
Loader is very tight and dry. It also comes with CTR bucksaw. NY STATE
Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August
Boonville, New York www.starwebhosting.net/woodsmen/
The Tree that Started it All!
Tigercat 845 Item ID: 8139
SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August
Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.
1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.
AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029
Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Woods Publishing
931-797-8029 Thurs, 7 Sept - Sat, 9 Sept
Escanaba, Michigan
John Deere 650J XLT
BANDMILLS & HEADSAWS
CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it
2011 Model with around 8000 Hours, well maintained
and ready to work. has been rebuilt, it has a 24foot in
feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production machine, with air strain conveyers
Excavator w/Ryan DS 28 Felling Head that go up ID: and76226 down, with airbags, Item ID: 5109 Item MID-ATLANTIC LOGGING & BIOMASS it includes two setsaof Mcdonough 2009 model with forestry package, has 6000 frame hours, This is a 2006 320CL excavator with Ryan DS 28 felling with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept head on it. machine is tight with no leaks. The cutter head around 75%
Contact: AUSTIN
MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO
pressure Casting wheel has about 250 hours onguides. it and the Top excavator has 8,000. It Selma, North Carolina has about 500 hours on new hydraulic pump. www.midatlantic-logging-biomass is supported on both sides. This Contact: TED expo.com/ is an extremely accurate machine
Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co
Cat 517
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky
Item ID: 20725
John Williams http://www.kfia.org/ 2006 model with 6000 original hours, and enclosed cab. (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx j@lumbermens.co Work ready.
DESIGN DIRECTOR Contact: AUSTIN
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
JD 540A (‘76)
Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
in ve1y good condition, Cuts 130
feet a minute CLT Morbark 30XL also has Item ID:presses. 13937 Item ID 13876. Austin x703
Great condition, very well kept, 900 HP V12 Cat engine, discs/wear plates replaced 1 year redone, and with valve bank has been S& W ago, 125spout Band Mill replaced, machine has been completely gone through and anything needing replaced has been, greased regularly, new radiator Call for Caterpillar generator - Low hours more pictures!
Item ID: 3526
** INFO LINK**
Tire size 23.1-26, Back tires 70% thread left, Front 15%, 2yrs owner, Motor completely rebuilt (700hrs), Transmission rebuilt (by John Deere 900hrs ago), Center section good, Breaks good, Turn on, ready to go to work, In KY Contact: JOE Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 OR 801-362-2170
P.O. Box 1916
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
Item 54265 (888) ID: 401-6367
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
BELL TRACKED (1993) Columbia, TN 38402-1916 Lever, Deutz engine, Has unit for A/C, but unsure of it AD SUBMISSIONS working or not, 2 years, Used for one job, U/C 65-70%, Burns no oil, InMay PA be sent to
morris@lumbermens.co
Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send888-401-6367 address changes to: Phone: EXT 709 Lumberman's Exchange 801-362-2170 P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity JD 460 (1997) and space. Although all efforts have ID: 1095 been madeItem to ensure accuracy of content submitted advertisers New 5.9L Cummins engine, by Single arch, Deere winch, Comes chains, the 12K frame hrs, New hydraulic pump and with writers, Lumberman's (about 100hrs), New seals & and bushings, In NY Exchange, its cylinder principles associates, are not held liable for Contact: JOE errors or omissions. Reproduction, Email: Joe@lumbermensco.com in whole or part, is prohibited with Phone: 888-401-6367 EXT 709 out written consent. 801-362-2170 ©2017 Woods Publishing
on the mill, electronic computer Set
Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or 702-875-2703
JD5, 640 (’80) Item ID: 93988 Saw ..................... 29 Baker ...................................... 7 Menominee
Cat 3406 140KW Genset, 12,400
hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd Deere pac for carriage, John 650K XLT Item ID: 480 sawyers cab, computer controls,
2013 model with 4300 Hours, has forestry package, and
Detector's Inc.and .............. 30 & Bell's Machining ..................... 27CenterMetal strong, section tight & strong, Turn-on GO, All fluids
Tires 23.1x26 , Thread left 30%, 6068T Powertex engine (’96), Brakes
cabinet with electronic recently had new tracks, sprockets,drives idlers, andfor rollers
Brute Force Mfg. ..................... 31
filters just changed, In OH
carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Midwest Sharpening.............. 26
Contact: JOE Email: Joe@lumbermensco.com
Buck Equipment (AIM) ........ 36 888-401-6367 Morbark ..................................... Phone: EXT 709 OR 801-362-2170 9 Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CAT 518 (’88) Item ID: 90569 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40
Same owner 7yrs,Tire size 23.1x26, Back tires 90%, Front tires 40%, CAT 3304 engine, Center tight, Franklin 42 9 (bump winch), Good,
CW Mill-Hogzilla ................... 15 Electric ............................ 20 strong motor,Row getting out of business, no crack sheet metal, straight pins, In OH
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Contact: JOE Email: Joe@lumbermensco.com
Empire Hydraulics ................... 8 888-401-6367 Select Sawmill Phone: EXT 709......................... OR 801-362-217019 Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10 Hydro Ax 611E Item ID: 58544 Union Grove Saw & Knife.. 2, 37
Iron Bull ................................... 21
Contact: AUSTIN
Email: Kilgore Saw ............................. 22Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029
Lignomat ................................. 24
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
WoodMizer ................................ l
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
installed.
STACKING RAC Prentice 210E Item ID: 8256
Knuckleboom loader. Needs new batteries and also needs the small gear on the Rotobec head. It has saw and delimber hookups, but no saw nor delimber. Ready to be shipped! Good machine, gets the job done, works as it should!
Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 ❘ L! (888) 401-MENS 401-MENS
NO. 21
L O G G I N G
MARKETING DIRECTOR
Donna Heninger
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
07 Prentice 950B
“Precision Under Pressure”
Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
‘16 Halverson H140 John Deere 650H Skidsteer Item ID:(DEMO) 50512
Item ID: JW-909632 Contact: J Williams Contact: AUSTIN Ph: (888) 401-6367 x701 Email: Austin@lumbermensco.com Equipped with forestry package.
Phone: 888-401-6367 EXT 703 931-797-8029
John Deere Backhoe
‘93 Barko 180B
Item ID: 14077 '94 John Deere 548E Contact: Austin Item ID: 14185 Ph: (888) 401-6367 x703 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Item ID: 21361
Prentice 180
John Deere 410D Backhoe, 4WD, Heavy Lift Option, 4&1 Bucket on front, 12” on back, 10ft. Snow Pusher, 2900 hours,
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
09’ John Deere 700J Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
L O G G I N G
Item ID: 4654
13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Franklin Q70 Item ID: 5458
2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.
‘05 Gehl CTL 70 Contact: AUSTIN
Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029
Contact: J Williams Ph: (888) 401-6367 x701
‘14 John Deere 843K Item ID: 14236
chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer. Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com with 1700 hours, in very good
Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter
condition. Easily produces high
quality chips with patented ‘Cone’
- Small manufacturer in PA has
made the best valued log splitter. ‘15 John Deere 648L Item ID:up 14237 Handles logs to 32”. Uses
2015 John Deere 648L 44” tires 2267motor. hours 85-90% dry, tight, start low hour, drum design. Can easily load 42’ 13HP Honda Manual runs as should ready to go, dual arch, good winch
vans and produce 6 - 8 loads per but electronic option is available. Contact: MARK day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367toEXT 708 or 702-875-2703 EDGERS & GANGS adjustable single two way. Great Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a ‘14 Barko 595 Item ID: 14238 homemade processor with a 10’
2014 Barko 595 MLdeck. Magnum+ CSI 264 Delimber 18’ CSIgrapple, 4400 ground FIREWOOD PROCESSORS log Has a hydraulic saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should,
ready to work,chain on pits trailer, kodiak grapple 2010 Shop Built Wood Processor andcat kicker that all runs off
- It has a 353 Detroit diesel, 40 Contact: ofMARK a 4 cylinder Mercedes power Email: Mark@lumbermensco.com inch insert tooth circle saw, 30 Phone: foot unit. Has a 4’EXT chain saw that kicks 888-401-6367 708 or 702-875-2703 Issue 364 386
1994 Model with 10,000 hours, joystick control, 6 cylinder Cummins motor, tight turn table, and plumbed for a bucksaw. Work ready
‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com
Item ID: 48601
96’ Hydro ax 611E
‘83 John Deere 4850
Item ID: 7822
Lumbermens™ since 1986
❘
Item ID: Phone: 888-401-6367 EXT13920 703 OR 931-797-8029
Contact: Austin ‘13 KMC 2500 Track 2011 Deere Ph:437D (888) John 401-6367 x703 Skidder Knuckle Boom Loader Item ID: 52342
Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
2011 model portable loader, has 8,631 hours on it. capacity!. Item ID 13421. Sam x702 Woods ready.
Contact: WALKER BARKO Email: Walker@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 707 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very well built processor. Item ID 13820.
motor, Rotobec continuous
Firewood Processor - This is
(excellent condition.). Item ID
Sam x702
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes
JD 337E (2016)
tach, oil pressure, water temp and Item ID: 34479 amp gauges. Cuts logs up to 16”.
CSI reversible 4400 (18’ saw), 1.8K hours, In WV
One owner and comes with all
manuals and receipts. Purchased Contact: JOE Email: new forJoe@lumbermensco.com $32,500. Item ID 13865. Phone: Sam x702888-401-6367 EXT 709 801-362-2170
LOGGING EQUIPMENT BANDIT
grapple, 5,000 original hours. 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. inJD good working order. 22in 550K (2015) kohing head. head Item ID: works 92495great.
Item ID x702 3.5K hrs, 18”13185. new tracksSam sprockets idlers, Winch, In WV
1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners 801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR
Tigercat 615C
delimber, has been rebuilt. Item grapple ID: 17058 Boom minor leaks. Chipper - Cat Under Carriage2013 at model with onlycylinders 600 hours inhave like new condition, with 1999 Bandit 1900 Tracked Disc
size 30,5 tires. Item ID 13694. Sam x702 50% or better. 475 hp Cummins
Contact: AUSTIN 94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Email: Austin@lumbermensco.com
with low EXT at hours 3,500. 5.9 Well maintained. Item ID 13294. Phone: 888-401-6367 703 ORat 931-797-8029 Sam x702
CUMMINS continuous grapple.
3412 Caterpillar Diesel engine
x702Item ID: 52609
2004 Bandit Beast Model 4680 -
Runs Great!. Item ID 13740. Sam
TimberPro 735B
BELL2 processor head. with 850 HP. 5300 hrs. Mill in (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly
U/C 50%, enclosed cab, leveling cab, A/C - heat works. It can also be
1990 good condition. Just finished 10 purchased without theBell ROlly Super 2 head T - This Bell has
a brand new Duetz engine. Lever Acre clearing job, ready to work! Contact: JOE Email: Joe@lumbermensco.com
control, 33” pump and tranny Remote control. Big production Phone: 888-401-6367 EXTbar, 709 OR 801-362-2170
List seLL exchange buy save
❘
LumbermensCO.com
** CALENDAR**
CAT 555D Grapple Skidder Item ID: 8610
3226 hours, 35.5 tires approx 50-60%, everything is in excellent condition, routine maintenance through cat, works great, pulling machine, selling only to buy a bogie skidder! Call for more pictures!
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
Boonville, New York www.starwebhosting.net/woodsmen/
The Tree that Started it All!
Timbco 425 Feller Buncher
SOUTHWEST FOREST PRODUCTS EXPO CAT 527 Grapple Dozer Item ID: 91441 Fri, 25 August - Sat, 26 August
Item ID: 69600
2005 Cat 527, undercarriage 90-95%, repaired leaky fuel tank, rebuilt transmission/torque and final drive approx 1500 hours ago, strong motor, good working machine. Call for more pictures!
Hot Springs, Arkansas www.arkloggers.com
Timbco 425 Feller buncher. 1200 hours on longblock engine. Everything works (except possibly the AC - hasn't been run for a while). Dry machine. UC 70%. Pads have some ware.
TED GREAT LAKES 72NDContact: ANNUAL Contact: MARK Email: Teds@lumbermensco.com Email: Mark@lumbermensco.com Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 701 EXPO Phone: 888-401-6367 EXT 708 or 702-875-2703 or (801) 319-9351
published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and JD 648 G3 Grapple Skidder industrial woodworking plants worldwide.
PUBLISHER
Thurs, 7 Sept - Sat, 9 Sept
Item ID: 4572
Escanaba, Michigan
Skidder has been a tree service company 10 hours onowned thisbymachine sincetheitpast 20 years and because of that, it hasn’t been beat up in the
woods much. Stored in garage when not in use. Brand new has been rebuilt, it has a 24foot in 28L tires, strong winch, good center section.
feed deck 20 foot out feed deck Contact: AUSTIN
Email: Austin@lumbermensco.com with 44888-401-6367 inch wheels,EXT and Phone: 703all the
bells and 931-797-8029 whistles, its a production
that go up and down, with airbags, '93 John Deere 548E it includes two14184 sets of Mcdonough Item ID:
pressure guides. Top Casting wheel Selma, North Carolina Contact: AUSTIN www.midatlantic-logging-biomass is supported on both sides. This Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 703 machine is an extremelyEXT accurate
Email: Teds@lumbermensco.com
Morris Woods Phone: 888-401-6367 EXT 701 or (801) 319-9351 (888) 401-6367 ext. 704 morris@lumbermens.co
Lexington, Kentucky
Item ID 13876. Austin x703 '04 John Deere 700H
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic computer Set Phone: 888-401-6367 EXT 703 works,1 1/2" or 2" band, 22ft. track
Caterpillar all new led lighting, new batteries, couple new
John Williams http://www.kfia.org/ drive tires, 4 new studded chains, snowing wings, Just had main new Axle seal replaced on one side, new head gasket (888) 401-6367 ext. 701 all within the last 500 hours. Machine is running good and KentuckyWoodExpo.aspx j@lumbermens.co ready to work, text for more pictures. Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784
feet a minute also has CLT presses.
Item 14187 S&W 125 ID: Band Mill with
Cambridge, Ohio www.ohioforest.org Treefarmer C7T GM Grapple/Winch Skidder Item ID: 11726
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
** INFO LINK**
Item P.O. ID: Box89885 1916
Phone: 888-401-6367 701 or (801) 319-9351 B & B Mfg. ............................... 18 M&F EXT Gauge ............................. 28
Prentice (’09) MAILING2432 ADDRESS Columbia, TN 38402-1916
-3.7K hrs, Tire size 30.5-32, Tires thread 80% front, 60% (888) back, Center section tight,401-6367 Dual arch, Winch works good, Grapple & steering cylinders repacked recently, Excellent service record, 3rd owner, he put 1.1K hrs on it, 2nd AD SUBMISSIONS owner put only 100hrs on it, then went out of business, May be sent to In IN
morris@lumbermens.co
Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange 801-362-2170 P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited purposes(‘08) of clarity JDfor848H and space.Item Although all efforts have ID: 8810 been made to ensure accuracy of 14K frame hrs, 3yrs owner,by Owner put 2K hrs on it content submitted advertisers since purchase, Tires size 35.5, 40% thread, No winch, and writers, the Grapple no issue, No oil Lumberman's burn, no leaks, New windows Exchange, 300hrs ago, In TNits principles and associates, are not held liable for Contact: JOE errors or omissions. Reproduction, in whole or part, is prohibited with Email: Joe@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 709 801-362-2170 ©2017 Woods Publishing
PRICE REDUCED - 305 Hours on out of frame rebuild on 4/53 Detroit, rebuild Clark 3 speed powershift transmission and rebuilt torque converter. All paper work available on rebuilds. All new on piece hoses from grapple rotation motor and grapple cylinders and to cylinders on single arch back to the cab valve bank. New transmission hoses also from torque converter to transmission and to transmission cooler. All cylinders rebuilt with no leaks. Some play in craddle pin but over all machine is tight. Frame has No cracks and has never been welded on. 24.5 X 32 tires 20 ply on rear with 20 percent tread 10 ply on front with 5 percent tread.
Contact: TED
B. H. Payne .............................. 16
Email: Teds@lumbermensco.com
Meadows Mill, Inc. ................ 33
Franklin 155B Forwarder Baker ...................................... 5, 7 Menominee Saw ..................... 29
Item ID: 10700 Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 1982 Franklin 155B Tree hauler/Forwarder. Ready to work. Perkins
inline 6 engine. Ideal for walnut. Can be hauled on a low-boy. 5019
Hours. more pictures.Sharpening.............. 26 Brute Force Mfg. ..................... 31Call forMidwest
Contact: Buck Equipment (AIM) ........ 36 TED Morbark ..................................... 9 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
2011 Cat 525C sawyers cab, computer controls, Item ID: 26688 cabinet with electronic drives for
New rubber, and lots of recent upgrades.
carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
STACKING RAC
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill Cable........................... Skidder 4
1994 Timberjack 240 B
1989, 5.9 Cummins engine.Controls The engine ..... was replace Thomas Industrial 10 with an almost new motor from a wrecked truck. The
cable Skidder. 7,225 hours on a rebuilt engine. Winch works good. Woods ready.
Hahn Machinery ...................... 3
Prentice 210 E
Hurst Boiler 14 Item............................. ID: 98009
Timberjack 450 C
Item ID:Show 5077......... 39 The Paul Bunyan
Prentice E Series E loader. Well maintained and21 in Iron 210 Bull ................................... great condition.
transmission was rebuilt, also re-build axle. Estimate about 2500 hours onSaw the new Slight.. leak trans. Union Grove &stuff. Knife 2,in37 Fronts 45% with new bear claw chains, backs 80%.
Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701 or (801) 319-9351
Email: Teds@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 701
Kilgore Saw ............................. 22
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
Universal Refiner ................... 23 Contact: TED
SELL YOUR EQUIPMENT TODAY TODAY l§
or (801) 319-9351
❘
24/7 SUPPORT 0 SUPPORT
Item ID:74044
Contact: WALKER Email: Walker@lumbermensco.com www.BakerProducts.net 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 707 ❘ L! (888) 401-MENS 401-MENS
NO. 23
L O G G I N G
MARKETING DIRECTOR
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Item ID: 93592
CAT 140G
EQUIPMENT REPS
64196 DanckaertItem BandID: Resaw - Roughly
front and rear. Working. Almost everything on here has
MID-ATLANTIC ADVERTISING SALESContact: TEDLOGGING & BIOMASS EXPO
Donna Heninger
BANDMILLS & HEADSAWS John Deere 548D
machine, with air strain conveyers
MID-ATLANTIC LOGGING & BIOMASS 648 G3 John Deere skidder 9700 hrs on frame new JD motor 400 hrs ago. Blade extensions 28l tires 75 to 80% Fri, 15 Sept - Sat, 16 Sept
Woods Publishing been recently replaced. Call for more info.
DESIGN DIRECTOR
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
John Deere 648G3 Item ID: 58995
Two owner machine with 8300 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
John Deere 1710D Forwarder
‘16 Halverson Log Skidder H140 Item ID: 15324 Skidsteer (DEMO)
Item ID: 94242
2003 John Deere 1710D 8 wheel forwarder, approx 16k hours, tires approx 60%, comes with tracks on the back, great working machine! Call for more pictures!
Item JW-909632 2012 John Deere G3 ID: 540 Log Skidder, well maintained, good condition, 7000 hours. J Williams Contact:
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Ph: (888) 401-6367 x701 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
‘93 Barko 180B
Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Log Loader Item ID: 25974
John Deere 2954C Log Loader w/ Waratah 624C Processor Head -2012 -9991 hours -Excellent Condition Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
L O G G I N G
‘13 KMC 2500 Track Skidder
‘89 Timberjack 380A
2011 CAT 525C
Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Item ID: 14203 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
off onto a conveyor. This is a very
well built processor. Item ID 13820. Timberpro TL735B Tracked Feller Sam x702 Item ID: 64107 Buncher
735B approx 11k hours, rails and undercarriage-approx Firewood Processor This70% is or better, good heat/AC everything is in good working order, very well maintained, completely gone through in October, new fluids all around, new filters, new a worth) Chomper Model 16some PDA hoses(about $3k some cylinders replaced, repacked. Call for more pictures!
‘05 Gehl CTL 70
automatice firewood processor
Contact: MARK Item ID: JW-986495 with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
Mid 90’s Husky Brute 335XL
ID:13421. 14088Sam x702 capacity!.Item Item ID
BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
Caterpillar
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good
lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts. Purchased Winch Newand Hyd Park Brake. 13916. Austin x703 for $32,500. Item ID 13865. Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT
on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great. SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
delimber, grapple has been rebuilt.
‘83 John Deere 4850
‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN
condition. Easily produces high
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco - Two Brewco Saws 848 GSaws Grapple Skidder in excellent condition. Runs great. Item ID: 85843
Item 2003 - ID 848 13644. Grapple /Sam cable –x702 dual arch. Excellent condition, used daily. 35.5 tires at 40-50%. Tight center section and pins. Dual arch with winch. Call for more pictures
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor TEDDetroit diesel, 40 -Contact: It has a 353
Email: Teds@lumbermensco.com Phone: 888-401-6367 701 inch insert tooth circleEXT saw, 30 foot or (801) 319-9351
Issue 364 386
tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges. Cuts logs up to 16”.
made the best valued log splitter.
BANDIT Hydro Ax 411
1999Item Bandit 1900 Tracked Disc ID: 98954 13HP Honda motor. Manual start - Cat Under Carriage at Includes log Chipper forks, morbark sheer head, and 8foot mower. but electronic option is
All work ready. available. 50%
or better. 475 hp Cummins
Contact: AUSTIN Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge
adjustable to single two way.
Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Sam x702
2004 Bandit Beast Model 4680 -
Treefarmer C5D Skidder
3412 Caterpillar Diesel engine Item ID: 17115 with 850 skidder. HP. 5300 in hi/low log deck. Has a hydraulic grapple, 1970 Tree Farmer C5D cable Detroithrs. 353, 4Mill speed with homemade processor with a 10’ chain and kicker that all
and shuttle, carco winch , ring chains on front axle, good blade. Noisy, but runs pretty good. comes 2 good spare runs smokey, off some leaks good condition. Justwith finished 10tires.
Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: TED Email: Teds@lumbermensco.com Remote control. Big production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 701 or (801) 319-9351
Lumbermens™ since 1986
❘
List seLL exchange buy save
as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
96’ John BELL Deere 643D
Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘
LumbermensCO.com
** CALENDAR**
TimberPro 725B FOR CLASSIFIEDS
Timbco 425D
Item ID: 20976
Item ID: 98053
Call 888.401.MENS
(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco Seedisc pictures, and DAYS 2900 intermittent saw head. prices, Cream puff!
1995 model with good Undercarriage and 22” quadco hot saw. Around 10,000 hours.
NY STATE WOODSMEN'S FIELD 18 August - Sun, 20 AugustContact: JOE Location of all equipment at
Contact: AUSTIN Fri, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 www.starwebhosting.net/woodsmen/
The Tree that Started it All!
648 E Cable Skidder
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
Item ID: 87791
Hot Springs, Arkansas www.arkloggers.com
648E has new motor 360 hrs on it. 23.1 26 tires at 80 to 85% Almost everything on this has been replaced. Call for more info.
BANDMILLS & HEADSAWS
Timberjack 240D Danckaert Band Resaw - Roughly Item ID: 40272 10 hours on this machine since it
Skidder has a grapple and a winch, with 6 cylinder has In been rebuilt, it has a 24foot in Cummins motor. excellent condition.
feed deck 20 foot out feed deck AUSTIN 72ND ANNUAL GREAT LAKES Contact: Contact: TED Email: Austin@lumbermensco.com Email: Teds@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 701 or (801) 319-9351
Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
morris@lumbermens.co
Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange 801-362-2170 P.O. Box 1916 Columbia, TN 38402
Contact: SAM www.midatlantic-logging-biomass Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702
THE PAUL BUNYAN SHOW Contact: TED Email: Teds@lumbermensco.com Fri, 6 Oct EXT - Sun, Oct319-9351 Phone: 888-401-6367 701 or8(801) Cambridge, Ohio www.ohioforest.org
** INFO LINK** JD 648H (’08)
Item ID: 6051 B & B Mfg . ............................... 18 -Tires size 30.5, 30% fron tires, back tires brand new, 16 enB. H. Payne .............................. gine fan is brand new (1.8K last year), all cylinders have been repacked, spent $4K on the A/C last year, brand Baker ...................................... new, Lil’ slack in the center section, not major,5, 12K7 frame hrs, 700hrs he put on it, 25hrs on engine when he first boughtMachining it, Transmission, 2yrs owner, IN MO Bell's ..................... 27
Brute Force Contact: JOEMfg. ..................... 31 Email: Joe@lumbermensco.com Buck Equipment (AIM) Phone: 888-401-6367 EXT........ 709 36 Corley 801-362-2170 Mfg .............................. 32
M&F Gauge ............................. 28
648 G Inc Skidder Meadows Mill, . ................ 33 Item ID: 76963 Menominee Saw ..................... 29
1996 648 G cable skidder. Strong machine. Engine new 3 years ago. Trans also gone Metal . .............. throughDetector's just prior to Inc engine. 28 X 32 30 tires. Strong machine ready to work
Midwest Sharpening.............. 26 Contact: TED
Email: Teds@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 701
or (801) 319-9351 Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is CWItem Mill-ArmorHog .............. 17 ID: 1324 published monthly by Woods CWwith Mill-Hogzilla ................... 15 13000 frame hours a New undercarriage. No blow by, Publishing, P.O. Box 1916, Columbia, TN 38402. All rightsand doesn’t use any oil Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Email: Austin@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of John Deere 85D content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 48169 and writers, the Lumberman's Exchange, its principles and Only 1265 original hours on it. Comes with 24, 30 & 36” Iron Bull ................................... 21 associates, are not held liable for buckets. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent. Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing
Rotochopper............................ 40
John Deere 700H
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
Row Electric ............................ 20 Sawmill Exchange .................. 11
it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1yCat goodD6M condition, Cuts 130 Dozer
Itemalso ID:has 71062 feet a minute CLT presses.
Caterpillar D6MAustin XL Dozer Enclosed Item ID 2001 13876. x703 cab with heat and A/C, new undercarriage, Low original
comes with winch and rops, Shours, & Whigh 125track, Band Mill with Well maintained, everything is clean and tight.
Caterpillar generator - Low hours
Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com
Phone: 888-401-6367 EXT 708 works,1 1/2" or 2" band, 22ft. track
702-875-2703
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
Barko 495B
sawyers cab, computer controls, Item ID: 44764
cabinet electronic drives forJohn 2016 modelwith with 3900 hours, csi delimber on big trailer fully plated. carriage knees, husk including Contact: 48" bottom AUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
STACKING RAC
Select Sawmill ......................... 19 SmithJohn Sawmill ........................... Deere 640D 4 Item ID:63000 The Paul Bunyan Show ......... 39
Tigercat 604 Cable Skidder Item ID: 6552
cable Industrial Skidder. Controls Rebuilt ..... engine Thomas 10 and new hydraulic pump put in. Union Grove Saw & Knife.. 2, 37 Woods ready.
approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!
Universal ................... 23 Contact:Refiner WALKER Email: Walker@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 707
Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 25
L O G G I N G
2yrs owner, AD tire size 30.5x32, tires are at 70%, Center SUBMISSIONS section tight, 8K hrs, engine re-built by previous owner, May be sent to In NY
that go up and down, with airbags,
http://www.kfia.org/
EQUIPMENT REPS
P.O. Box 1916 JD 640D (’95) Columbia, TN 38402-1916 Item 51746 (888)ID: 401-6367
'13 John Deere 548G III
2002 prentice 384 Knuckleboom, saw not included. KentuckyWoodExpo.aspx Mounted on ’89 S 2500 International truck. Knuckleboom carrier/trailer is also available for $4,900.
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703
MAILING ADDRESS
Item ID: 8789 MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.
Lexington, Kentucky Loader Item ID: 36889
(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
bells and whistles, its a production
machine, with air strain conveyers
KENTUCKY WOOD EXPO Fri, 15 Sept Sat, 16 Sept Prentice 384- Knuckleboom
MARKETING DIRECTOR International TD15 John Williams Bull Dozer
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
Escanaba, Michigan
Selma, North Carolina
Woods Publishing
ADVERTISING SALES
Thurs, 7 Sept - Sat, 9 Sept
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
JD 643G
Item ID: 80565
Good cutting teeth are good one, Little hydraulic leak on cylinder, Dry machine, In MO Contact: JOE Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 OR 801-362-2170
‘16 Halverson H140 '96 CAT 515 Log Skidder
John Deere 753J
Item ID: 7534
Skidsteer (DEMO)
Item ID: 14258
REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.
2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Ph: (888) 401-6367 x701
Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
'07 John Deere 848H Grapple Skidder Item ID: 6566
Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
L O G G I N G
‘13 KMC 2500 Track Skidder
‘14 B66TD Rotochopper
Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703
12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124
Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
SamItem x702 ID: 7698
grapple, 5,000 original hours.
‘05 Gehl CTL 70
10’ John Deere 648H
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.
Item 13644.New SamRubber, x702 Heat/ LowID Hours! ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder. 2010 Shop Built Wood Processor
SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 Issue 364 386
Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and
chain conveyer, 8 way splitter,It on has
Timberjack 1270C amp gauges. Cuts logs up to 16”.
a
Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000
computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.
13916. Austin x703
Best Value Portable Log
new for $32,500. Item ID 13865. Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367
LOGGING EQUIPMENT made the best valued log splitter. JD 648G III (’03)BANDIT Item ID: 36067 - Small manufacturer in PA has Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc motor 6Khrs ago., 16K frame hours, Transmission
Reman gone through, New brakes, New pins & bushings (main arch lift), All 13HP Honda motor. Manual start Chipper - Cat Under Carriage cylinders repacked, Front and rear ends gone through, Tires at 24.5s, 80% thread front, 70% back tires, Motor has a little blow by and 1 door is missing., Owner since Jan ’18 and put 600 hrs on but electronic option is available. 50% orsince better. 475 hpOwner Cummins it...knows Most maintenance and fixing records avail., In WV
Has Log Lift. Uses 4-way wedge adjustable to single two way.
Diesel. 7500 Hours. One owner.
Contact: JOE Email: Joe@lumbermensco.com Great Well maintained.
Item ID 13294.
Phone: 888-401-6367 EXT 709 OR 801-362-2170
Value! PA. Item ID 12062. Sam x702
Sam x702
homemade processor with a 10’
3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in
Firewood Processor - This is a
log deck. Has a hydraulic grapple,
2004 Bandit Beast Model 4680 -
chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
bushings in boom, new rod and packing in jib cylinder, new Front window, new injection pump, resealed main valve body, tons of new hoses, new led lights, new pump coupler.
off onto a conveyor. This is a very
Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor
Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
Item ID:Deere 13920 Logger John Contact: Austin Item ID: 82959 Ph: (888) 401-6367 x703 2005 John Deere 2054 Logger New pins and capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric 702-875-2703 knuckleboom, 30' boom, 75hp
Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
well built processor. Item ID 13820. '94 CAT 518C Cable Skidder
‘83 John Deere 4850
‘95 John Deere C6 Tree Farmer
List seLL exchange buy save
motor, Rotobec continuous
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great.
Item‘05 ID 13185. Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with
Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
525Dgrapple. CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam
(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.
CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702
30.5 32 tire w/85% tread remaining. Dual arch with a winch. Being used everyday! No issues! Very nice machine! Clean and tight!
BELL
1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and 801-362-2170 ❘
LumbermensCO.com
** CALENDAR**
‘97 Timberjack 240D Item ID: 13917
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
FOR CLASSIFIEDS 93’ Prentice 210
CallItem 888.401.MENS ID: 14216 Contact: AUSTIN See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Location of all equipment at Phone: 888-401-6367 EXT 703 Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/
The Tree that Started it All!
BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August 2011 JohnBand Deere 648H
‘99 Hydro-Ax 511 EX Item ID: 13799
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
been rebuilt, it has a 24foot in Contact:has AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO
Thurs, 7 Sept - Sat, 9 Sept
MID-ATLANTIC
LOGGING & BIOMASS EXPO
j@lumbermens.co
Contact: SAM DESIGN DIRECTOR Email: Sam@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 702
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
07’ May Tigercat be sent 620C to
Item ID: 14248 morris@lumbermens.co
POSTMASTER Contact: AUSTIN Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 P.O. Box 1916 Columbia, TN 38402
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 16’itsCAT 545D Exchange, principles and Item ID: 14211 associates, are not held liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 703 ©2017 Woods Publishing
in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
12’ John Deere 843K Item ID: 14212
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
feet a minute also has CLT presses.
Timber Harvester
ItemItem ID 13876. Austin x703 ID: 29211 S & W 125 Band Mill with
John Deere 1270D Timber Harvester, 6 Wheel with Dangle Head, TracksCaterpillar on Front, John Deere Motor, 12000hours hours, generator - Low well maintained
Contact: AUSTIN on the mill, electronic computer Set Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 708 or 702-875-2703 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio
www.ohioforest.org
hours ready to run. Item ID 13434.
‘04 Fabtek 344B
Sam x702
** INFO LINK**
CARRIAGES & DRIVES
Item ID: JW-093430
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29 Item ID: 9901
'97 CAT 525 Original Cable Skidder
Detector's IncPulled . .............. 30 Bell's Machining ..................... 27OfMetal One A Kind. Has Never A Log. Owned By An Electric Company. Deal! Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Contact: SAM Buck Equipment (AIM) ........ 36 Mor bark ..................................... 9 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Corley Mfg .............................. 32 Multitek ................................... 12
Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
2004 Timbco 445EXL
sawyers cab, computer controls, Item ID: 14170
cabinet with electronic drives for 85% Undercarriage. carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
STACKING RAC
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
2016 Tigercat 604 E 34 Great Lakes Mfg. ....................
Row Electric ............................LOW 20 Hours, Excellent Condition, Very Hard To Find Dozer. Sawmill Exchange .................. 11 Contact: SAM Select Sawmill .........................Email: 19 Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Smith Sawmill ........................... 4
Hahn Machinery ...................... 3 Item ID:55393
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Dyna Products ........................ 35 Empire Hydraulics ................... 8
Cable Skidder
D5H TSK
Item ID: 7098
Timbco 820D
Bought new in 2016. Has approx 1300 hours on it. Ready to go to work. Call for more Iron Bull ................................... 21 pictures!
Item ID: 18370 Union Grove Saw & Knife.. 2,06’37model Clam bunk forwarder with Cummins engine.
Kilgore Saw ............................. 22 Contact: WALKER Email: Walker@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 707
Universal Refiner ...................Contact: 23 AUSTIN
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
Email: Austin@lumbermensco.com
www.BakerProducts.net WoodMizer ................................ l 888-401-6367 Phone: EXT 703 OR 931-797-8029 800.S48.6914 I S73.663.7711
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 27
L O G G I N G
MARKETING DIRECTOR
that up and down, with airbags, 07’goTigercat 724E Item two ID: 14218 it includes sets of Mcdonough
pressure guides. Top Casting wheel Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine
Item ID: 99807
12k hoursJohn runs Williams great tight center (888) section 401-6367 ext. 701
machine, with air strain conveyers
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Morris Woods '94 CAT 518 (888) 401-6367 ext. 704 Grapple Winch morris@lumbermens.co
bells and whistles, its a production
Escanaba, Michigan
Woods Publishing
ADVERTISING SALES
ItemonID: 14217 10 hours this machine since it
Hot Springs, Arkansas www.arkloggers.com
“Precision Under Pressure”
PRENTICE 410EX
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Item ID: 3280
Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!
Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170
Tigercat 234 Knuckle Boom Loader Item ID: 68516
‘11 Tigercat 845C Item ID: 13927
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
2012 Tigercat 234 loader, 7271 hours, with 264 ultra CSI delimber, on Kodiak series 3 hydraulic trailer, with 56" big grapple, very well kept, regular maintenance every 300 hours, greased often, everything is tight, dry machine ready to go. Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
‘16 Halverson H140 Skidsteer (DEMO)
‘93 Barko 180B Item ID: 14077
‘93 John Deere Contact: Austin 548E
14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703
‘94 Caterpillar 320 Item ID: 13936
L O G G I N G
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder 2012 Cat D6K XL
Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703
‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124
Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
Sam x702
grapple, 5,000 original hours.
Firewood Processor - This is
‘83 John Deere 4850
a Chomper Model 16 PDA
‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703
automatice firewood processor
with John Deere power unit with
low panel includes JD hours. 648GControl Grapple Skidder Item ID: 54867 tach, oil pressure, water temp and
Timberjack 380C
Item ID: 410 chain conveyer, 8 way splitter, on 95’ long frame model with JD winch. Skidder is in excel-
Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good
lent condition. 20,000lb goose neck trailer. Item ID Contact: AUSTIN 13916. Austin x703 Email: Austin@lumbermensco.com Phone: EXT 703 Best Value888-401-6367 Portable Log Splitter 931-797-8029 - Small manufacturer in PA has
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
condition. Easily produces high
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
made the best valued log splitter.
01’ Ponsee Bison in excellent condition. Runs great. Forwarder FIREWOOD PROCESSORS Comes with a set of tracks.
log deck. Has a hydraulic grapple,
2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703 Issue 364 386
minor hydraulic leaks. Winch works good. Just a good workingowner machine. and It’s been working with every day One comes allweather permitting. It has tight pins, good tires, strong engine and transmission works great. manuals and receipts. Purchased
Contact: TED new for $32,500. Item ID 13865. Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Sam x702 or (801) 319-9351
LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc
but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702
Item Sam ID: 14109 Item ID 13644. x702
’99 Johngauges. Deere 648 GCuts Grapplelogs / Cableup skidder a few amp to has 16”.
Item ID: Under 13911Carriage at Chipper - Cat
13HP Honda motor. Manual start
Firewood Processor - This is a
homemade processor with a 10’
Sam x702
2004 Bandit Beast Model 4680 -
Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in
chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER
Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
(11.5K hrs) Comes with the 426 CTR delimber. Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.
off onto a conveyor. This is a very
well built processor. Item ID 13820.
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703
capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric 801-362-2170 knuckleboom, 30' boom, 75hp
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘05 Gehl CTL 70
‘95 John Deere C6 Tree Farmer
List seLL exchange buy save
motor, Rotobec continuous
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great.
Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with
Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
‘85 John BELL Deere 440D
Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘
LumbermensCO.com
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
'01 John Deere 648G3 Item ID: 90899
The Tree Excellentthat Condition Low Price! Started Contact: SAMit All!
Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702
published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily www.arkloggers.com Item ID: 14213
been used around a sawmill.
Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 931-797-8029
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
Woods Publishing MID-ATLANTIC
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3
LOGGING & BIOMASS EXPO
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
‘03 John Deere 748GIII
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
j@lumbermens.co
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
May be sent to morris@lumbermens.co
Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES
Menominee Saw ..................... 29
Bell's Machining ..................... 27 Item ID: 13948
Metal Detector's Inc. .............. 30
‘98 611 Ex-Hydro Ax
sawyers cab, computer ‘05 CAT TK560 controls,
Corley Mfg .............................. 32
cabinet with electronic Item ID: 14004 drives for carriage Midwest Sharpening..............Contact: 26 SAM knees, husk including 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXT 702 Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Force Mfg. ..................... 31 Contact: Brute AUSTIN Email: Austin@lumbermensco.com Buck Equipment (AIM) ........ 36 Send address changes to: Phone: 888-401-6367 EXT 703
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's CAT 517 Exchange,‘06 its principles and Item ID:held 13869 associates, are not liable for errors or omissions. Reproduction, Contact: in whole orSAM part, is prohibited with Email: Sam@lumbermensco.com out written consent. Phone: 888-401-6367 702 ©2017 WoodsEXT Publishing
is an extremely accurate machine
Baker ...................................... 5, 7
B & B Mfg. ............................... 18
POSTMASTER
Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
is supported on both sides. This
B. H. Payne .............................. 16
Contact: TED
AD SUBMISSIONS
Cambridge, Ohio www.ohioforest.org
** INFO LINK**
pressure guides. Top Casting wheel
Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,
Teds@lumbermensco.com MAILING ADDRESS Email: Phone: 888-401-6367 EXT 701 or (801) 319-9351
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
Contact: AUSTIN
Item ID: 1865
Austin Woods 215,000 pound Cat 235bz knuckle boom with 50 foot (888) 401-6367 ext. 703 reach. Needs about $7K in repairs. austin@lumbermens.co
it includes two sets of Mcdonough
Item ID532 13876.CAT Austin x703 Feller
THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703
CAT 235 BZ
that go up and down, with airbags,
feet a minute also has CLT presses.
Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx
Item ID: 13851
10 ‘80 hoursJohn on thisDeere machine 540B since it Item ID: 11345 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production
Hahn Machinery ...................... 3
Tigercat 604
Hurst Boiler 14 Item............................. ID: 7436 Good rubber and less than 4000 hours, in excellent Iron Bull ................................... 21 condition!
Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 703 931-797-8029
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
John Deere 437E The Paul Bunyan Show ......... 39
Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.
STACKING RAC Ponsse Ergo Item ID: 7720
Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37
12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewing system for crane rebuilt 2k hours ago, main pump resealed about 1k hours ago, comes with set of tracks! Currently working, buying newer. Call for more Pictures
Universal ................... 23 Contact:Refiner JOE Email: Joe@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 709l 801-362-2170
Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703
Owner is getting out of the logging business and
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 29
L O G G I N G
Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext. 23.1 26.701 In excellent (888) 401-6367 condition!
Danckaert Band Resaw - Roughly
in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Item ID:DIRECTOR 985 MARKETING
BANDMILLS & HEADSAWS
machine, with air strain conveyers
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
210D Knuckleboom Loader on Truck
2004 CAT 517 Grapple Dozer
Item ID: 6694
Item ID: 70690
cat 517 swing boom grapple, enclosed cab, heat/air air needs a recharge, 8’ 6 way blade, 24” pads, good rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures and video!
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
'94 Barko 160 Knuckleboom Item ID: 14186
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘16 Halverson H140 Skidsteer (DEMO)
replaced motor last year, 12,817 frame hours, leak on valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs good, clutch is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, trailer frames great loader and truck! Item ID: JW-909632
Contact:MARK J Williams Contact: Ph: (888) 401-6367 x701 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
‘93 Barko 180B
Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘08 John Deere 335C Item ID: 14089
‘95 John Deere C6 Tree Farmer
L O G G I N G
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Item ID: 13885
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
off onto a conveyor. This is a very
well built processor. Item ID 13820.
“13 KMC 2500 Tack Skidder Item ID: 14078
Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495
‘83 John Deere 4850
Contact: J Williams Ph: (888) 401-6367 x701
'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on
Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter
with 1700 hours, in very good
condition. Easily produces high
- Small manufacturer in PA has
made the best valued log splitter.
‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start
Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available. Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,
Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks Issue 364 386
Lumbermens™ since 1986
❘
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
Sam x702
‘09 John Deere Firewood Processor - This is 650J XLT
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID
‘95 Bell Ultra T
a Chomper Model PDA Item ID: 16 14091
automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes
13238. Chris x700 Item ID: 14070
1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started
good. in good working order. 22in tach, oil pressure, water temp CAT and D4H TSK Cable Dozer w/Log Arch amp gauges. Cuts logs Equipment up to 16”.
kohing head. headItem works ID:great. 47648
Item ID 13185. Sam x702 One owner and comes1997 with all D4H TSK series 3, 7936 true hours, tracks and undercarriage approx 90% en-
cab with heat, winch/log arch, dry machine, complete cat service on all filters, 1999 Barko 160D - new engine with manuals and receipts. closed Purchased fluids, checked hoses and everything. Call for more pictures!
approximately 1500 hours. Hour
new for $32,500. Item ID 13865. Sam x702
Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708 or 702-875-2703
LOGGING EQUIPMENT BANDIT
have only used it to load trucks or
as a backup as needed. Has a CTR
'92 CAT 518C Cable Skidder
delimber, has been rebuilt. Itemgrapple ID: 14107 Boom cylinders have minor leaks. Chipper - Cat Under Carriage at Hard to Find “C” model in great shape! Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc
Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple. Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
Runs Great!. Item ID 13740. Sam
‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL
Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production
List seLL exchange buy save
❘
LumbermensCO.com
** CALENDAR**
Quadco 2900 Intermittent Head FOR CLASSIFIEDS Item ID: 32295
Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708 www.LumberMB\ISmagazine.com or 702-875-2703 Intermittent Saw Head 2900 Quadco, great working condition, completely gone through recently, new teeth on disc saw, hoses and fluids checked.Call for more pictures!
www.starwebhosting.net/woodsmen/
The Tree
2010that Tigercat 724E Started
BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO TIMBERJACK 460D / 648G III Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August Item ID: 34900
‘93 Barko 180B
it All!
Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular
feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 709 OR 801-362-2170 Phone: 888-401-6367 EXT 703 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production
Woods Publishing MID-ATLANTIC
LOGGING & BIOMASS EXPO
Morris Woods John Deere 548G3 (888) 401-6367 ext. 704 Grapple Skidder morris@lumbermens.co
Escanaba, Michigan
machine, with air strain conveyers
Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,
that go up and down, with airbags,
CAT 928G
PUBLISHER
ADVERTISING SALES
& 4 in 1 bucket. Selma, North Carolina www.midatlantic-logging-biomass Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029
KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept
Item ID: 43042
MARKETING DIRECTOR
EQUIPMENT REPS
Sam Wall Item ID: 5627 (888) 401-6367 ext. 702Timbco 425 sam@lumbermens.co(11K hrs) Ledgering system doesn’t work, trail wheel needs to be
Cambridge, Ohio www.ohioforest.org
** INFO LINK**
fixed. It does has new wiring and a new sensor. The undercarriage is at 40 with a 5.9 engine. A/C - heat works! There's a computer glitch
Austin Woods (waiting to be fixed) where to tip the head back, you have to hit another function and then the head will move back. The computer (888) 401-6367 ext. 703 system has been checked and re-calibrated by Woodland Equipment in (MI) 18mo. ago. It has a Risley processing head. austin@lumbermens.co Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS POSTMASTER
Caterpillar generator - Low hours
Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com
works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709
801-362-2170
Cat 3406 140KW Genset, 12,400
CARRIAGES & DRIVES
2010 Cardinal HD Carriage
Contact: AUSTIN Carriages (Sawmill) - Cardinal Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Carriage line it includes carriage
Meadows Mill, Inc. ................ 33
with onboard log turners, carriage
drive, hyd pac2s for carriage, Kubota SVL-95 Item ID: 4861 Menominee Saw .....................This 29is in LIKE-NEW sawyers cab, computer controls, conditions. Only 420hrs. It’s currently on a small job. Owner doesn’t need it any longer. It has high flow joystick
Brute Force Mfg. ..................... 31
A/C - heat works.electronic It has the load sensing for closed with drives Metal Detector's Inc. ..............controls, 30 radio,cabinet center hydraulics with parallel loader control valve. Very tight machine. In addition to the diamond forestry mulching head, carriage knees, husk includingowner Midwest Sharpening.............. 26
Corley Mfg .............................. 32
Multitek ...................................Phone: 12 888-401-6367 EXT 709 OR 801-362-2170
CRD Metalworks .................... 25 Item ID: 53699 CW Mill-ArmorHog .............. 17
Piper's Saw Shop.................... 13
Contact: AUSTIN Buck Equipment (AIM) ........ 36 Send address changes to: Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Lumberman's Exchange
P.O. Box 1916 Columbia, TN 38402
one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.
Item x703 QuotesID we13876. receivedAustin range between
1989 Model with factory 5.9 Cummins engine, power shift transmission, Hercules winch. Working daily.
B. H. Payne .............................. 16
May be sent to Machining ..................... 27 1996 modelBell's with Joystick control and Koehring morris@lumbermens.co Head.
is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130
hours ready to run.230A Item ID 13434. TIMBERJACK
M&F Gauge ............................. 28
Bell Ultra C
is supported on both sides. This
Item ID: 9450 Sam x702
B & B Mfg. ............................... 18
Baker ...................................... 5, 7 Item ID: 1025
pressure guides. Top Casting wheel
('08) (4.5K hrs) One owner only, bought brand
Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct
Contact:DESIGN MARK DIRECTOR Email: Mark@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 708 702-875-2703
it includes two sets of Mcdonough
feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with
Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.
2007 John Deere 548G3 Grapple Skidder, 10,073 hours. Excellent condition, pictures float tires but machine will Johnshow Williams come 28L's at 70% or better, complete service on all fluids and filters(888) done 16 401-6367 hours ago, bushing and pin in turn cylext. 701 inder was replaced, everything else is tight, dry, and strong. j@lumbermens.co Call for more pictures and video!
MAILING ADDRESS
10 hours onnothis (‘05) pins and bushings all good, leaks,machine motor rebuiltsince approx. it 2.5K hrs ago, T/C (no direct drive). Two new back tires, front tires 35%. JD hasgrapple beenonrebuilt, it hrs, hasnew a injection 24footpump in 748G model bigger it. 13K frame 8mo. ago, new ECU. A/C - heat good!
650 G Dozer
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
is including a blue diamond grapple and a bucket.
48" bottom saw and 36" top saw Contact: JOE Morbark ..................................... 9 Email: Joe@lumbermensco.com
Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11
STACKING RAC
Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... Hurdle Circle Saw39 Item ID: 42289 Thomas Industrial Controls..... 10
90's Hurdle bandmill converted with circle saw, 200 HP 3 phase, 2 headblock, miner 2 blade edger, log deck, complete Union Grove Knife .. 2, under 37 it, chip system, shaker, Saw vibrating& table, has wheels power unit has a stow away Call for more pictures!
Universal Refiner ................... 23 Contact: MARK
Email: Mark@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 708
702-875-2703
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
Meadows #3 Complete Operation Item ID: 964
2002 Meadows includes Cornell vertical edger, slab saw, green chain, all electric with diesel generator. Also includes car it18 cat loader.
Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 I S73.663.7711 800.S48.6914 931-797-8029
❘ L! (888) 401-MENS 401-MENS
NO. 31
S A W M I L L
The Lumberman's Exchange is published monthly by Woods 1998 650g John Deere 10,069 hours. With winch. Undercarriage - 70%. New transmission at 7500 hours. It has air ride seat. New CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, c-frame bushing less than 250 hours on them. It works every day. Columbia, TN 38402. All rightsNo issues. Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: TED submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and Email: may Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn MachineryModel ...................... been made to ensure accuracy of Mobile Dimensions 12 3 content submitted by advertisers Circle Saw Item ID: 6278414 Hurst Boiler ............................. and writers, the Lumberman's Exchange, its principles and Model 12 Mobile Dimensions sawmill, 70's model On a trailer, Gas Iron Bull ................................... 21 motor, has all tool kit, extra set of belts, would like, Less than 100 associates, are not held liable for hours, been kept under cover its whole life. “plans changed and errors or omissions. Reproduction, things happenedKilgore and he never got to............................. do what he wanted with it.” Saw 22 Call for more pictures! in whole or part, is prohibited with Lignomat ................................. 24 out written consent. Contact: MARK Email: Mark@lumbermensco.com ©2017 Woods Publishing Phone: 888-401-6367 EXT 708 or 702-875-2703
L O G G I N G
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Hot Springs, Arkansas www.arkloggers.com
Item ID: 14077
Item ID: 14247
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘08 Timberking B20 Item ID: 13956
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Woodmizer LT70 Bandmill
‘16360 Halverson H140 Hud-Son Portable Sawmill Item ID: 8841 Skidsteer (DEMO)
Item ID: 98854
2014 Woodmizer LT70 Electric Bandmill Including: Accuset 2 Setworks, Lubemizer, Command Control station, Debarker, 6’ Bed Extension, 30 HP Electric Motor Call for more pictures!
Hud-Son Portable Sawmill 2016 1000 hours model H360 Item ID:year JW-909632 35 HP motor Hydraulic Log Dog Hydraulic Back Stop Sterling Contact: J TS/ Williams ProCut saw blade 13Ft 11in 7/8 1 1/4 PV 121 Peavy Hook
Ph: (888) 401-6367 x701
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
‘93 Barko 180B
Desjardin Shingle Mill
Item ID:Item 14077 ID: 43905 Contact: Austin Good shape. 401-6367 Bought it 30 yrs ago from Ph: (888) x703 another owner. It did not get much use. Only used it to make shingles for his home.
Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
‘05 Woodmizer LT300 Item ID: 14031
S A W M I L L
Woodmizer LT 3000 Operation Item ID: 10761
Item ID: 14118
Item ID: 14078 Has the Kubota Diesel Motor! Contact: Austin (888) 401-6367 x703 Contact:Ph: AUSTIN
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Real Tuff Bagger Item ID: 50281
30Hp motor, infeed hopper opens 27”x34” Bag/bale size 12”x16”
‘05 Gehl CTL 70
Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXTJW-986495 703 OR 931-797-8029
Contact: J Williams Ph: (888) 401-6367 x701
S&W 125 High Production Mill Item ID: 8019
1995 model 19ft in feed stop & load 8 with 18ft out feed. Electric chain conveyer, way splitter, on over hydraulic. Can cut 26ft long. 4cylinder Isuzu diesel motor. Production is20,000lb comparablegoose to a woodmizer lt300. neck trailer. Item ID
Item ID: 14073 Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: AUSTIN
Email: Austin@lumbermensco.com Best ValueEXT Portable Log Splitter Phone: 888-401-6367 703 OR 931-797-8029
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’
- Small manufacturer in PA has
the best valued log splitter. 03’made Woodmizer LT-300 Handles logs up to 32”. Operation Uses
ID:motor. 14171Manual start 13HPItem Honda
vans and produce 6 - 8 loads per but electronic option is available. Contact: AUSTIN day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Email: Austin@lumbermensco.com EDGERS & GANGS Phone: adjustable to single 888-401-6367 EXT two 703 way. Great Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Cutoff Trim Saw
homemade processor Item ID: 5461 with a 10’
FIREWOOD PROCESSORS log deck. Has on a hydraulic Trim Saw - 12000 10 HP motor cutoff blade, 5grapple, HP motor on feed chain. Like new, less than 200 hrs
2010 Shop Built Wood Processor
chain and kicker that all runs off
TED - It has a 353 Detroit diesel, 40Contact: of a 4 cylinder Mercedes power Email: Teds@lumbermensco.com
or (801) 319-9351 inch insert tooth circle saw, 30Phone: foot 888-401-6367 unit. Has EXT a 4’701 chain saw that kicks
Issue 364 386
off onto a conveyor. This is a very
One Owner! 136 hours, Tons of Extra Parts. Priced cheap! capacity!. Item ID 13421. Sam x702 Contact: SAM BARKO Email: Sam@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 702 knuckleboom, 30' boom, 75hp
Sam x702
Item5,000 ID: 70976 grapple, original hours.
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
with 1700 hours, in very good
Item'16 ID: LT40 13920Super Contact: Austin Hydraulic Ph: (888) 401-6367 Item ID: 9903x703
‘13 KMC 2500 Track '02 Woodmizer SkidderLT-40 Super HD
2010 model with 7000 hours, operation includes log deck, roller tables, Cornell 2 blade board edger, 50ft green chain, 13428 Ln. cab //withPO phase converter, deckVictory extension, sawyer heat &Box air. 124 Two log turners,Adams kicker & unscrambler. Center, NY 13606
‘83 John Deere 4850
‘95 John Deere C6 Tree Farmer
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Lumbermens™ since 1986
❘
well built processor. Item ID 13820. Firewood Processor - This is a Chomper Model 16 PDA
motor, Rotobec continuous Holtec Transcut II
condition.). Item IDelectric 2014 Model(excellent 20’ fixed frame assembly, Siemens motor with starters. 7.5Kw (10hp) voltage 220V 3 phase 13238. Chris x700 armored guide bar. 63” effective cutting length.
1995 Barko 775 B Feller Buncher automatice firewood processor Contact: AUSTIN
Email: Austin@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029
low hours. Control panel includes
on injection pump. always started
amp gauges. Cuts logs up to 16”.
kohing head. head works great.
tach, oil pressure, water temp and One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
with 850 HP. 5300 hrs. Mill in
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners as a backup as needed. Has a CTR
Cornell Double End Trim Saw
Meadows #2Carriage Deluxe Chipper - Cat Under at Item ID: 14250 50% or better. 475 hp Cummins Contact: Diesel. 7500AUSTIN Hours. One owner. Email: Austin@lumbermensco.com Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 Sam x702 3412 Caterpillar Diesel engine
Item ID 13185. Sam x702
have only used it to load trucks or
1999 Bandit 1900 Tracked Disc
2004 Bandit Beast Model 4680 -
good. in good working order. 22in
delimber, grapple has been rebuilt. Item ID: 6307
Boom cylinders have minor leaks. 1995 model with automatic setworks, variable speed feed & hydraulic conveyer.
Item ID 13694. Sam x702 AUSTIN 94Contact: BarkoAustin@lumbermensco.com 275 - Excellent value Email: Phone: 888-401-6367 EXT with low at hours at 3,500. 5.9703 931-797-8029 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam
1996 Jackson Shavings Mill x702 Item ID: 1271
BELL
Model 30D6
good condition. Just finished 10
1990 Bell Super T - This Bell has
Contact: AUSTIN
a brand new Duetz engine. Lever Acre clearing job, ready to work! Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Remote control. Big production
List seLL exchange buy save
control, 33” bar, pump and tranny ❘
LumbermensCO.com
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
Precision Scragg Item ID: 3607
Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area
it All!
Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com
Sanborn Scragg Mill Item ID: 14050
Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084
PUBLISHER
Woods Publishing
Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
Fri, 15 Sept - Sat, 16 Sept
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Item ID: 14191
(888) 401-6367 ext. 701 j@lumbermens.co
Contact: AUSTIN
DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger
Lexington, Kentucky LT70 ‘06 Woodmizer http://www.kfia.org/ Electric KentuckyWoodExpo.aspx Item ID: 14076
Phone: 888-401-6367 EXT 703
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Cornell
AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703
Edger
Item ID: 33423
** INFO LINK**
Cornell edger size 4”-27” edger, with infeed table. Has 20 HP electric motor. Selling much. Call for more pictures.
laser arch on top of edger. Austin Woods because it hasn’t been used (888) 401-6367 ext. 703 austin@lumbermens.co Contact: TED
Email: Teds@lumbermensco.com
MAILING ADDRESS Phone: 888-401-6367 EXT 701 or (801) 319-9351
B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 H. Payne .............................. 16 (888) 401-6367 PrecisionB.Scragg Item ID: 3607
Baker ...................................... 5, 7 AD SUBMISSIONS Excellent condition, 40 hp twin saw motor. The saw motors are 40HP 1780 RPM currently wired for 480v.—-spinning May be sent to Lincoln Bell's ..................... 36 inch F pattern circle Machining saws. The hydraulic power pack is27 a
10Hp motor also 480V. Scragg will handle 12 foot and up to 14 morris@lumbermens.co
POSTMASTER
inches in diameter easy. Scragg in great shape. has been run Brute Mfg. ..................... 31 very little. Can send videoForce on request.
Send address changes to: Contact: TEDBuck Equipment (AIM) ........ 36 Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 32 Corley Mfg .............................. P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25
Frick #1 Jumbo Mill
The Lumberman's Exchange is ID: 200 CW Item Mill-ArmorHog .............. 17 published monthly by Woods Complete operation that includes ................... a meadows CW Mill-Hogzilla 15 Publishing, P.O. Box 1916, edger, HMC V206 Debarker, 48” Chipper, blower, live decks, and many other spare parts. Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Empire Hydraulics ................... 8 Email: Austin@lumbermensco.com discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy of Quality 4 Machinery Head Trim Saw 3 content submitted by advertisers Item ID: 1559 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Ready to run, operates from either end, Va Area Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com in whole or part, is prohibited with Phone: 888-401-6367 EXT 701 Lignomat ................................. 24 out written consent. or (801) 319-9351 ©2017 Woods Publishing
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29
Corley Complete Sawmill Metal Detector's Inc. .............. 30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11
BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it
Danchaert Band Resaw
has been rebuilt, it has a 24foot in Item ID: 13876 feed deck 20 foot out feed deck Contact: AUSTIN Email: with 44Austin@lumbermensco.com inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703
‘14 Hurdle 3-HD
S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,
‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
STACKING RAC
Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10
LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
Hurdle #2 Sawmill Item ID: 8720
2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Morgan Slab edger, 3 strand log deck, and more.
Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 931-797-8029 ❘ L! (888) 401-MENS 401-MENS
NO. 33
S A W M I L L
MARKETING DIRECTOR Woodmizer Twin Blade Diesel Edger John Williams
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
S A W M I L L
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Morbark 30/60 Chipper
Woodmizer LT300
Item ID: 16264
Item ID: 7566
Approx 5000 includes, infeed conveyer, log deck, and 50’ x 8’ greenchain, command control center, accuset set works, good mill 30 HP 3 phase electric motor. Call for more pictures!
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
1999 Morbark 30/36 Pull-Behind Chipper. Cat Diesel Engine . 7010 Hours. Full Cab and loader Hand held Remote. Ingersoll Rand Air Compressor Installed. Everything about this machine is Excellent!!! Current CARB stickers! Call for more pictures.
Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
MISCELLANEOUS
machine, and air compressor.
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
2008 INTERNATIONAL DURASTAR 4300 Forestry Truck Bucket - Boom Truck MaxxForce DT Diesel Engine , 6 Speed Manual Transmission . 103,107 miles . 10,181 hours Terex/HiRanger XT6070 Boom With 60-70ft Work Height, 11ft Chip Dump Box 2 of these trucks up for sale, the other truck has 91,035 miles. Both truck are in Excellent Condition!.
Morbark PS8, plainer domer, Cat diesel electric generator 75 kilowatt, stacking bins, complete operating mill extra set of knives, extra spike wheels, bearings, extra shaft the PS8 and it has all new bearings the spike rolls have all new points, the peeler head has new knives and roughing head chisels so basically it is a completely rebuilt machine with 0 hrs Call for more pictures!
W6F Allied Systems Winch
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
It’s an R model from the 70’s. There is an 8-track player in the dash. The cab is very rough so miles and hours are unsure 7000 hood loader Less than 500 hours on rebuilt engine. Call for more pictures!
Contact: MARK ‘05 Gehl CTL 70 Email: Mark@lumbermensco.com Phone: 888-401-6367 Item ID: JW-986495EXT 708 702-875-2703
Contact: J Williams Ph: (888) 401-6367 x701
‘83 John Deere 4850
chain conveyer, 8 way splitter, on
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
with 1700 hours, in very good
359 Peterbilt Truck condition. Easily produces high Item ID: 7841 quality chips with patented ‘Cone’
1987 model with 600,000 Miles. Has 400 Cummins endrum Can40easily load 42’drive gine, air design. ride suspension, rears, and all new tires. Can be sold with or without a Pitts log trailer
vans and produce 6 - 8 loads per Contact: AUSTIN day. Item ID 13882. Austin x703 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 EDGERS & GANGS 931-797-8029 Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS 2003
Peterbilt 378 - Small manufacturer in PA has Item ID: 59687 made the best valued log splitter.
Phone:Item 888-401-6367 EXT 708 or 702-875-2703 ID: 13920
Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Morbark M12D Chipper Skidder Item ID: 48408
Contact: TED Email: Teds@lumbermensco.com 1994 Barko 160B Electric Phone: 888-401-6367 EXT 701- or (801) 319-9351
off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
Mack Truck with Trailer
grapple, original hours. Item5,000 ID: 23388 (excellent condition.). Item ID
2012 Mack truck with with double bunk log trailer CH CFU 613 daycab,13238. all goodChris tires, allx700 good breaks, daily worker. Selling to reduce insurance costs!
automatice firewood processor
1995 Barko 775 B Feller Buncher
low hours. Control panel includes
on injection pump. always started
Contact: MARK Email: Mark@lumbermensco.com - Pumps recently 400 hrs Phone: 888-401-6367 EXT 708redone. or 702-875-2703
with John Deere power unit with
good. in good working order. tach, oil pressure, water temp and1999 International 910022in Item ID:head 33563 kohing head. works great. amp gauges. Cuts logs up to 16”.
Item ID 13185. Sam x702 One owner and comes with all1999 International 9100. C-10 motor. 8000 Serco loader continuous rotate. Like new tires. 720,000 miles. Dual fuel
Barko 160D - new engine manuals and receipts. Purchased tanks, fairly 1999 new clutch. Truck overall is in good shapewith approximately 1500 hours. Hour new for $32,500. Item ID 13865. Contact: TED Sam x702
Email: Teds@lumbermensco.com meter dont 2 owners Phone: 888-401-6367 EXTwork. 701 orThe (801)last 319-9351
LOGGING EQUIPMENT BANDIT
have only used it to load trucks or
1996 Peterbilt overhaul, Handles logs378 up complete to 32”. Uses
in excellent condition, well maintained. Cat 3406 E, 15 SPD, Air trac Suspension, 246” WB, 40K Rears, 13HP Honda motor. Manual start Peerless Trailer, Electric Scales, 8’ 6” Bunks
1999 Bandit 1900 Tracked Disc
delimber, grapple has been rebuilt.
but electronic option is available. Contact: MARK
50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner.
Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com
Phone: 888-401-6367 EXTway. 708 Great adjustable to single two 702-875-2703
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Kenworth T-800
homemade processor Item ID: 87370 with a 10’ log deck. Has a hydraulic grapple, Kenworth T-800, Complete overhaul, very well
maintained, Cat C-15,and 18 SPD. Chalmer Suspension, 246” Processor chain kicker that all runs offWB, 40k Rears 2SPD. Cascade Trailer, Electric Scales, 8’6” Bunks
- It has a 353 Detroit diesel, 40
‘95 John Deere C6 Contact: MARK Tree Farmer Email: Mark@lumbermensco.com
BARKO
Item ID: 76831
winch came off 850 c John Deere dozer. Controls are with it. Everything is in good working condition. Took it off dozer and put a set of rippers FITS: Cat D6, 527 Komatsu D61-D65 John Deere 750-850 Case 1850 New Holland D180 Call for more pictures!
Item ID: 63148
Item ID: 14078 2009 Morbark Beever M12D Pull-behind Wood Chippers Contact: Austin , Perkins Diesel Engines. 12" rating We are a large scale, Sam x702 volume capacity!. tree companyItem that isID just13421. selling off some our Ph: (888) 401-6367 x703high old equipment.
Mack Truck w/Hood Loader
Item ID: 56032
Issue 364 386
Ph: (888) 401-6367 x701 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
FordID: F650 Service Truck Item 14077 Item ID: 92089 Contact: Austin 2008 with 210000 miles. Cummins diesel. 400 gallon Ph: (888) 401-6367 x703 diesel tank, and 600 gallon tank. Equipped with welding
Morbark PS8 Post Peeler
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
inch insert tooth circle saw,
drums, teeth, anvils, knife holders, also includes a Item ID: JW-909632 spare/parts chipper $100,000 OBO Call for more pictures! Contact: J Williams
‘93 Barko 180B
International Durastar Bucket Boom Truck Item ID: 6919
Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
2010 Shop Built Wood
Morbark 6036 Chipper
Item ID: 75143 ‘16 Halverson H140 in real good working condition, 525 HP engine, Skidsteer (DEMO) comes with a lot of extra parts, pumps, knives,
of a 4 cylinder Mercedes power
Contact: MARK 30Email: foot Mark@lumbermensco.com unit. Has a 4’ chain saw Phone: 888-401-6367 EXT 708 or 702-875-2703
Lumbermens™ since 1986
❘
that kicks
Chipper - Cat Under Carriage at
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 -
Paccair Winch 3412 Caterpillar Diesel engine Item ID: 86536 with 850 HP. 5300 hrs. Mill in
Paccair Winch = Model PA56-E10. Works great.
good condition. Just finished 10
Contact: TED job, ready to work! Acre clearing Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Remote control. Big production or (801) 319-9351
List seLL exchange buy save
as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELLTractor Truck Kenworth Road
Item ID: 14092 1990 Bell Super T - This Bell has
AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘
LumbermensCO.com
** CALENDAR**
MorbarkFOR Chipper Item ID: 43812 CLASSIFIEDS
Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD Fri, 18 August - Sun, 20 August Location of all equipment at Contact: TED Boonville, New York Email: Teds@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 6 knife - 58” chipper with 3 pocket blanks in it. 2nd owner.... 1st owner could not make payments so Morbark bought it back. Was like new 5 years ago when 2nd owner DAYS purchased it.
www.starwebhosting.net/woodsmen/
Samsung SL150 Wheel Loader Item ID: 98970
Model SL150, articulating wheel loader with enclosed cab, forks and bucket, 158 HP Cummins diesel. Very nice. Mid 90’s machine but very well maintained. Compares to JD 644. Weight 29,800. Call for more pictures!
The Tree that Started it All! Contact: MARK
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT has 708 Since 1986, Lumbermens published 702-875-2703 a monthly circular
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
PUBLISHER
Woods Publishing
BANDMILLS & HEADSAWS Precision Chipper SOUTHWEST FOREST PRODUCTS EXPO 2005 Peerless 45’ Walking Floor - Roughly Item ID: 4524 Fri, 25 August - Sat, 26 August TrailerDanckaert Band Resaw Item ID: 83112 Hot Springs, Arkansas www.arkloggers.com
66 inch ReBuilt Precision Chipper good shape
Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Contact: MARK with 44 inch wheels, and all the Phone: 888-401-6367 EXT 701 LOGGING & HEAVY EQUIPMENT EXPO Email: Mark@lumbermensco.com or (801) 319-9351 Phone: 888-401-6367 EXT 708 or 702-875-2703
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
'08 Dynamic Chipper Item ID: 14196
MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives
Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co
MARKETING DIRECTOR '99 Peterbilt Road Tractor
'91 Fuel Harvester KENTUCKY WOOD EXPO Tub Grinder Fri, 15 Sept - Sat, 16 Sept Item ID: 14112
Phone: 888-401-6367 EXT 703
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
P.O. Box 1916 Columbia, TN 38402-1916 Morbark Chipper (888) 401-6367
Item ID: 80356
AD SUBMISSIONS
** INFO LINK** B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16 Item ID: 28802 Baker ...................................... 5, 7
Meadows Mill, Inc. ................ 33
855 Cummings 350 KW
Morbark 58” LIKE NEW
Menominee SawID: ..................... 29 Item 6114 Metal . .............. 30 2 vibratingDetector's conveyer, it is aInc 2017 model with only
Contact: TED POSTMASTER Email: Teds@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 701 Lumberman's Exchange or (801) 319-9351
Brute Force Mfg. ..................... 31 Contact: TED Email: Buck Teds@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 701 Corley Mfg or (801) 319-9351 .............................. 32
Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 931-797-8029
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have CAT 3412 - 600KW Prime been made to ensure accuracy of Item ID:by 85729 content submitted advertisers and writers, the Lumberman's Has 233 original hours & 1 hour running time on Exchange, its principles andWill do load new sleeves, pistons, & bearings. associates, are not held liable for test before loading. errors or omissions. Reproduction, Contact: in whole TED or part, is prohibited with Email: Teds@lumbermensco.com out written consent. EXT 701 Phone: 888-401-6367 or©2017 (801) 319-9351 Woods Publishing
This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
CAT D349 Gen 2 Great Lakes Mfg. .................... 34
Item ID: 227 Hahn Machinery ...................... 3
Marathon Generator 208-220-230-240V, 480V transfer box, includes control panel, Hurstsafeties, Boiler ............................. 14 engine governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 ................................... original hours, 1100hp diesel. Iron Bull 21 Several other generators also available
Kilgore Saw ............................. 22
Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701 or (801) 319-9351
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
is supported on both sides. This is an extremely accurate machine
in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.
on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400
Totally rebuilt 58 inch real May by be pro. sent to clean nice piece.
P.O. Box 1916 Columbia, TN 38402
pressure guides. Top Casting wheel
AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Fri, 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Phone:
855 Cummings 350kw gen set enclosed with belly tank. 300 original hours since new. Bell's Machining ..................... 27 Other generators available.
morris@lumbermens.co
it includes two sets of Mcdonough
Item 13876. Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
that go up and down, with airbags,
Lexington, Kentucky http://www.kfia.org/ 3406 Cat engine and 4424 total KentuckyWoodExpo.aspx machine hours.
John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN
DESIGN DIRECTOR Email: Austin@lumbermensco.com
bells and whistles, its a production
machine, with air strain conveyers
Smith Sawmill ........................... 4 The Paul Bunyan Show Blockbuster 1412......... Plus39 Item ID: 958 Thomas Industrial Controls..... 10
hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
2016 Barko Tree Chipper
sawyers cab, computer controls, Item ID: 16688
cabinet with electronic drives for
150 hours. 550 Cimmins engine. Can handle
trees up toknees, 22 incheshusk in diameter. carriage including
48" bottomTED saw and 36" top saw Contact: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
STACKING RAC Freightliner 1990 Item ID: 1990
Comes with 8 way and 6 was& splitting head. Machine Union Grove Saw Knife .. 2, 37 is
MILES-322,470 CUMMINS motor with Jake brake 9 speed Eaton fuller Air ride over spring suspension 11.22.5 fair tires 15’ 10” of frame from cab back Had A.C. but doesn’t work. Originally had a water tank on it.
Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 703l 931-797-8029
Contact: TED Email: Teds@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 701 I S73.663.7711 800.S48.6914 or (801) 319-9351
2015 model with PLUS package and only 50 hours on it. in like new condition.
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 35
M I S C E L L A N E O U S
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
new drum with about 6o hours inch thick heavy duty skin
MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com
Donna Heninger
10 hours on this machine since it
peerless 45’ walking floor, refurbished, dot tagged, couple slats on thehas verybeen end are knickedituphas a bit, breaks good, rebuilt, a 24foot in tires decent, overall good condition, 96” wide. Call for more pictures! feed deck 20 foot out feed deck
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
1990 Freightliner Item ID: 7422
'10 Woodsman 440 Whole Tree Chipper Item ID: 14105
3,000 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘16 Halverson H140 Skidsteer (DEMO)
Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles
Western Star Heavy Haul Item ID: 14093
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351
‘93 Barko 180B
Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576
Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707
‘04 Takeuchi TLN140
M I S C E L L A N E O U S
Item ID: JW-880805
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder
Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124
Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
Item ID: 13994NY 13606 Adams Center,
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
off onto aMorbark conveyor. This is a very 2007 Chipper Item ID: 9658 well built processor. Item ID 13820.
‘06 Cord King Model 60 Item ID: 14068
‘05 Gehl CTL 70 Contact: AUSTIN
‘83 John Deere Shop Built Wood 4850 Processor
Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item"Like ID 13644. Sam x702 New" Tajfun
Firewood Processor FIREWOOD PROCESSORS
Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 Issue 364 386
Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701
Sam x702 model 22. Everything works like it should... Ready to go to Firewood Processor - This is work! aContact: ChomperWALKER Model 16 PDA Email: Walker@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 707 with John Deere power unit with or 931-797-3915 low hours. Control panel includes
tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.
chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer. 13916. Austin x703
Best Value Portable Log
One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts. Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.
Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series
Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Sam x702
2004 Bandit Beast Model 4680 -
3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
List seLL exchange buy save
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
‘15 Cord King M44
ID:13421. 13961Sam x702 capacity!.Item Item ID
BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
Morbark 40/36
good. in good working order. 22in Item ID: 647 kohing head. head works great.
It has a CAT engine (755hp) with a sloped live
floor and top feedwheel. Brand new clutch Item IDlarge 13185. Sam x702 installed. Ready to work!!!
1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners 801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL 3 Strand Log Deck
Item ID: 14095 1990 Bell Super T - This Bell has
AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘
LumbermensCO.com
** CALENDAR** GMC LOG TRUCK Item ID: 5037
1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission. NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029
www.starwebhosting.net/woodsmen/
'99 International 4700 Chip Truck
SOUTHWEST FOREST PRODUCTS EXPO International Boom Truck Fri, 25 August - Sat, 26 August Item ID: 84573
Item ID:Tree 14116 The
Hot Springs, Arkansas Good running boom truck. Call for more www.arkloggers.com and info.
that Started Only 71,697 Miles. it All!
Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular
Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 708 or 702-875-2703
Thurs, 7 Sept - Sat, 9 Sept
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Escanaba, Michigan
Item ID: 44131 MID-ATLANTIC LOGGING & BIOMASS Unit has 200 original Fri, 15 Sept -hours. Sat, 16 Sept
Woods Publishing Morris WoodsTRAILER 25' LOG PUP 4 BUNKS
LOGGING & BIOMASS EXPO
(888) 401-6367 ext. 701
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
Blockbuster Firewood Tumbler
Cambridge, Ohio www.ohioforest.org
Item ID: 52815
** INFO LINK**
is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts International 4300130 Item ID 13876.4300 Austin 2005 international dd466x703 less than
73000 miles, all new hoses, new bearings, $10k recently
Sinto & the W engine 125 Band with receipts Mill to prove all work, altech rebuilt the boom(23k Job) Call for more pictures!
Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
94’ Mack with Prentice 120 Sam x702 Item ID: 14215
CARRIAGES & DRIVES
B. H. Payne .............................. 16 Baker ...................................... 5, 7 Item ID: 80919
Menominee Saw ..................... 29
sawyers cab, computer controls,
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Midwest Sharpening.............. 26
carriage knees, husk including
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703
B & B Mfg. ............................... 18
Ford Bucket / Boom Truck
Brute ..................... 31 Chip Dump Box We do have Force 3 of theseMfg trucks .up for sale. Call for more pictures
Buck Equipment (AIM) ........ 36 Send address changes to: Contact: TED Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 Corley Mfg .............................. 32 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ -advertorial Bandit Grinder Chipper submissions areID: used at the Item 72593 discretion of the publisher and may This a 2017 Bandit 3680 875 hpof CAT bought it new be isedited for purposes clarity 10-17 it has 1000hrs+\- Still running it some. It has the and space. Although allhad efforts have new design 30 tooth mill and also a new tail shaft and new anvil and gate. Also has a set of 3” baffled beenfor made to ensure of This is screens it that only have aboutaccuracy 30hrs on them. a content strong tier 2submitted machine owner operated they are selling by advertisers because they upgraded to a 1200hp machine, there is and writers, Lumberman's nothing wrong with the this machine and it is ready to work! IfExchange, sold they can transport anywhere in Florida or to the its principles and FL state line to reduce transportation cost for the buyer. associates, are not held You won’t find a grinder in this good liable of shapefor anywhere. errors or omissions. Reproduction, in wholeTED or part, is prohibited with Contact: Email: Teds@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 701 or ©2017 (801) 319-9351 Woods Publishing
it includes two sets of Mcdonough
Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,
May be sent to 2008 Ford F-750 XL Super Duty Forestry Bucket..................... Truck / Bucket - Boom Bell's Machining 27 Truck Cummins Diesel Engine , 6 Speed Manual Transmission 81917 morris@lumbermens.co Miles , 8909 Hours Lift All LSS-55-1S Boom With 65ft Work Height, 11ft
POSTMASTER
that go up and down, with airbags,
Bucket Truck feet a minute also CLT presses. Item ID:has 29129
2018 Blockbuster firewood tumbler skidsteer attachment, like new! Call for more pictures!
MAILING ADDRESS
feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production
KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept
Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct
EQUIPMENT REPS
Item ID: 8256 has been rebuilt, it has a 24foot in
pressure guides. Top Casting wheel
Item ID: 761 Lexington, Kentucky 2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!
j@lumbermens.co Contact: JOE Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger 801-362-2170
10 hours this machine since it Sun 4 on Bolster Log Trailer
Selma, North Carolina Contact: TED Email: Teds@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 701 or (801)expo.com/ 319-9351
(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co
It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed. Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!
Danckaert Band Resaw - Roughly
Morbark ..................................... 9 Multitek ................................... 12 2009 Mack Truck & Trailers Item ID: 74618 Piper's Saw Shop.................... 13 18 speed. All new tires and brakes. Versitle with
CW Mill-ArmorHog .............. 17
Rotochopper ............................ either a Rosa log rack or storm debris box. 40 Serco
CW Mill-Hogzilla ................... 15
light bar; length bed............................ to takes 244" and to back20 285" Row Electric Will separate truck and trailer. 300,000 miles, 10,000
Dyna Products ........................ 35
Sawmill Exchange .................. 11
7500 Loader. Rear tires 11R 22.5 (95%). Log rack; hours. This is ready to go.
Empire Hydraulics ................... 8
Contact: TED Email: Teds@lumbermensco.com Select ......................... 19 Phone:Sawmill 888-401-6367 EXT 701
Great Lakes Mfg . .................... Kenworth Log Truck 34
Smith Sawmill ........................... 4
Item ID: 4849 Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst ............................. 14 1990 model Boiler with 300,000 original miles. Has 444 Cummins engine, 15 speed transmission, 46 rears. Recently had new Bull head, pistons, rings, and New steer tires21 inIron ................................... stalled. Can be sold with or without a Pitts log trailer.
Thomas Industrial Controls..... 10
Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. Phone: 888-401-6367 EXT 70324 931-797-8029
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
or (801) 319-9351
48" bottom saw and 36" top saw
STACKING RAC 75” Fulghum Chipper Item ID: 41386
75” 8 knife chipper 300HP motor, everything is in good working condition, hydraulic unit built in. Call for more pictures!
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Mack Log Truck
Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 37
M I S C E L L A N E O U S
MID-ATLANTIC
ADVERTISING SALES
BANDMILLS & HEADSAWS
machine, with air strain conveyers
Inline 6 CAT 200 KW
PUBLISHER
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
pictures
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
A D D I R EC TO RY
Phone
ffrreed d teb t e bb315.284.4126 b an aFaxndd so s onnss, ,i ni ncc. .
-- LLIIVVEE315.849.2045 AAUUCCTTI IOONN - Website Reman Plant -Date: 9:00 Reman Plant -Date:www.empirehyd.com 9:00AM AM| |Wednesday Wednesday- -October October9 9
1906 East Marc St., 98421 facility 1906 East Under MarcPressure” St.,Tacoma, Tacoma,WA WAEmail 98421- -Relocating Relocatingtotoa new a new facility “Precision info@empirehyd.com JA M E S G . M U R P H Y C O. I N D U S T R IA L AU C T I O N E E R S JA M E S G . M U R P H Y C O. I N D U S T R IA L AU C T I O N E E R S
HIGHLIGHTED HIGHLIGHTED ITEMS: ITEMS: 2016 HYUNDAI 70L-7A, 15,212LB CAP FORKLIFT
2016 HYUNDAI 70L-7A, 15,212LB CAP FORKLIFT PRESCOTT 60” HEAD RIG BANDSAW PRESCOTT 60” HEAD RIG BANDSAW (2)KLAMATH IRON WORKS 60” VERTICAL BAND RESAWS (2)KLAMATH IRON WORKS 60” VERTICAL BAND RESAWS SALEM 42” X 16” 3 KNEE TEMPOSONIC POSITIONER W/HYDRAULIC DRIVE SALEM 42” X 16” 36KNEE POSITIONER W/HYDRAULIC DRIVE PRECISION 48.11KNIFETEMPOSONIC CHIPPER PRECISION 6 KNIFE CHIPPER 2001 WEINIG48.11HYDROMAT-23C 4”X8”-6 HEAD JOINTED MOLDER S/N: 94671 2001 WEINIG WEINIG HYDROMAT-23E HYDROMAT-23C5 4”X8”-6 HEAD JOINTED MOLDER S/N: 94671 2000 HEAD MOLDER S/N: 89147 2000 WEINIG HYDROMAT-23E HEAD 4MOLDER S/N: 89147 STETSON ROSS 6-10A1 PLANER,58”X15”, HEADS W/FEED TABLE S/N: 2682 STETSON ROSS 6-10A1 8”X15”, HEADS TABLE S/N: 2682 2007 AMERICAN WOODPLANER, DRYER 18’ X 46’ X4 46’ SIDE W/FEED LOAD WOOD FIRED KILN 2007 AMERICAN WOOD DRYER 18’ X 46’ X 46’ SIDE LOAD WOOD FIRED KILN WSM BH SERIES HORIZONTAL GRINDER WSM 18”X10’ BH SERIES HORIZONTAL GRINDER VIBRATORY CONVERYOR & BUSH 36”- 4 KNIFE HOG WSM WSM 18”X10’ VIBRATORY CONVERYOR & BUSH 36”- 4 KNIFE HOG
Accord Financial Group, Inc..........................6............................................... 937-753-1345 Air Systems Mfg,.............................................7............................................... 828-757-3500 Albach Northamerica.....................................2............................................... 978-939-9111 Anson.................................................................3............................................... 800-663-7723 B & B Mfg.........................................................6............................................... 800-654-5320 B. H. Payne.......................................................14............................................ 404-761-8711 Baker..................................................................5, 8.......................................... 800-548-6914 Bell's Machining..............................................7............................................... 888-995-1965 Blockbuster Inc................................................6............................................... 888-775-4883 Item ID: 14077 800-803-3365 Buck Equipment (AIM)...................................38............................................ Built-Rite Firewood Processing Equip..................15............................................ Contact: Austin 800-757-2520 Corley Mfg........................................................13............................................ 423-698-0284 Ph: (888) 401-6367 x703 CW Mill,ID: DynaHog. .........................................39............................................ 800-743-3491 Item JW-909632 F&R Mfg.. . .........................................................13............................................ 800-355-1250 Contact: J Williams GoFast Manufacturing...................................6............................................... 800-854-7439 Ph: (888) 401-6367 x701 Great Lakes Mfg..............................................9........................... .................... 877-248-5677 HIXIZ..................................................................10............................................ 715-216-2751 Hurst Boiler......................................................10............................................ 877-774-8778 James G. Murphy Co......................................38................................... murphyauction.com JM Woods Auction Company, Inc...............4............................................... 800-447-7085 Kentucky Wood Expo....................................9............................................... 502-695-3979 Kilgore Saw.......................................................12............................................ 888-857-5153 Klug Korners....................................................14............................................ 800-471-5060 Lignomat...........................................................12............................................ 800-227-2105 Menominee Saw..............................................14............................................ 800-582-0470 Metal Detectors, Inc.......................................13............................................ 541-345-7454 Midwest Sharpening .....................................7............................................... 231-924-5953 Multitek North America. LLC.......................11............................................ 800-243-5438 Item ID: .................... 13920 800-211-9468 Pantron Automation, Inc. .............................4........................... Contact: Austin 800-845-6075 Piper’s Saw Shop.............................................11............................................ Prolenc Manufacturing, Inc...........................39............................................ 877-563-8899 Ph: (888) 401-6367 x703 Row Electric.....................................................7............................................... 800-248-4479 Ryan's Equipment............................................14............................................ 989-427-2829 ItemSawmill ID: 14078 Select Co............................................12............................................ 866-724-7600 Contact: Austin The Paul Bunyan Show..................................10.............................................888-38-TREES capacity!. Item ID 13421. Sam x702 Trelan.................................................................40............................................ 877-487-3526 Ph: (888) 401-6367 x703 BARKO 800-277-8068 Universal Refiner.............................................9............................................... Universal Wearparts, Inc...............................11............................................ 800-647-8440 1994 Barko 160B - Electric Woodcracker Forest Machines....................1............................................... 617-401-5584 Woodlandia......................................................8. .............................................. 877-508-8777 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very
‘16 Halverson H140 Skidsteer (DEMO)
‘93 Barko 180B
‘95 John Deere C6 Tree Farmer
‘13 KMC 2500 Track Skidder
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
f red teb b and so ns , inc.
- LIVE AUCTION Reman Plant -Date: 9:00 AM | Wednesday - October 9
1906 East Marc St., Tacoma, WA 98421 - Relocating to a new facility
INFORMATION JA MFOR E S G . MORE MURPHY C O. I N D U S T R IA LGO AU CTO TIONEERS M U R P H Y A U C T I O N . C O M FOR MORE INFORMATION GO TO HIGHLIGHTED ITEMS: 2016 HYUNDAI 70L-7A, 15,212LB M U R PH Y ACAP U FORKLIFT CTION . C OM PRESCOTT 60” HEAD RIG BANDSAW (2)KLAMATH IRON WORKS 60” VERTICAL BAND RESAWS SALEM 42” X 16” 3 KNEE TEMPOSONIC POSITIONER W/HYDRAULIC DRIVE Item ID: JW-986495 PRECISION 48.11- 6 KNIFE CHIPPER Contact: J Williams 2001 WEINIG HYDROMAT-23C 4”X8”-6 HEAD JOINTED MOLDER S/N: 94671 2000 WEINIG HYDROMAT-23E 5 HEAD MOLDER S/N:401-6367 89147 Ph: (888) x701 STETSON ROSS 6-10A1 PLANER, 8”X15”, 4 HEADS W/FEED TABLE S/N: 2682 2007 AMERICAN WOOD DRYER 18’ X 46’ X 46’ SIDE LOAD WOOD FIRED KILN WSM BH SERIES HORIZONTAL GRINDER WSM 18”X10’ VIBRATORY CONVERYORchain & BUSH 36”- 4 KNIFE HOG conveyer, 8 way splitter, on
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
motor, Rotobec continuous
Firewood Processor - This is
(excellent condition.). Item ID
Sam x702
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off
- It has a 353 Detroit diesel, 40INFORMATION of a 4 cylinder Mercedes power FOR MORE GO TO
Ucircle R Psaw, H 30Yfoot A U unit. C THas IO . CsawOthat Mkicks inch insert M tooth a 4’N chain Issue 364 386
well built processor. Item ID 13820.
Lumbermens™ since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
grapple, 5,000 original hours. 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
‘05
Boom cylinders have minor leaks.
Ite Co Ph
delimber, grapple has been rebuilt. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com
‘99 51
Ite Co Ph
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
The Tree that Started it All!
Hot Springs, Arkansas www.arkloggers.com
Escanaba, Michigan
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Donna Heninger
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
with 44 inch wheels, and all the bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine
Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
feed deck 20 foot out feed deck
feet a minute also has CLT presses.
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
DESIGN DIRECTOR
10 hours on this machine since it
in ve1y good condition, Cuts 130
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
Danckaert Band Resaw - Roughly
machine, with air strain conveyers
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
Cat 3406 140KW Genset, 12,400
BEST LESS
hours ready to run. Item ID 13434.
Sam x702
** INFO LINK**
CARRIAGES & DRIVES
2010 Cardinal HD Carriage
Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17 CW Mill-Hogzilla ................... 15
Includes 2” Pins, Nuts & Locks Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
Contact your
drive, hyd pac for carriage,
48" bottom saw and 36" top saw
KIT SPECIAL
Piper's Saw Shop.................... 13
Rotochopper............................ 40
STACKING RAC
www.prolenc.com
Call 877.563.8899 250.563.8899 www.BakerProducts.net WoodMizer ................................ or l
local................................. dealer or Lignomat 24
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
with onboard log turners, carriage
SELL YOUR EQUIPMENT TODAY TODAY l§
800.S48.6914 I S73.663.7711
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 39
LUMBERMENS™ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
®
®
45 Over 45 Years!
498 Eight Mile Road | Remus, MI 49340 WWW.TRELAN.COM