IN THE NET PENDANT MADE WITH LC MICROSTENCILS
Tereza Šťastná
IN THE NET
PENDANT MADE WITH LC MICROSTENCILS
Materials & Tools: • Mat • Tile • Flexible and rigid blades • Scalpel • Pasta machine • Roller
• Baking paper • Cookie cutters - three sizes (ø 1.8, ø 2.5, ø 3.2 cm) • Wet wipes • 2 mm drill • Texture sponge
• Polymer Clay - Premo Black , Gold, White • LC Microstencils • PearlEx gold powder • Poly Paste • Hoop with screw fastening
Tereza Šťastná I have been working since my childhood and I have tried many art and handicraft activities. In 2010 I first got to know polymer clay which fascinated me with its possibilities. I have attended several courses of Czech and foreign artists that inspire my work. Creation brings me joy and relaxation from everyday worries. www.fler.cz/fimule
Condition all three colours of polymer clay and run through the pasta machine on the widest setting.
Cut the black sheet in half, stack 2 halves and put it to a small tile.
Smooth over baking paper. Use a flexible knife to cut a curved strip.
Cut the white sheet in half, stack up 2 pieces and smooth over baking paper. Place a Microstencil on it a smooth with a roller.
Remove the Microstensil and carefully apply PearlEx to the impression.
Cut a circle using the smallest cutter.
Apply some Poly Paste to the edge and press against the black strip.
Cut the gold clay sheets in half and stack them up - without smoothing. Cut out a circle with the middle cutter.
(Tip: run the Microstencil through pasta machine first with scrap clay, then with white clay. At the beginning, LC Miscrostencil has some black powder on.)
Place the circle on the tile to the black strip and cut a part of the circle in the same arc with a flexible knife.
Unstack sheets. Apply to the edges of the circle.
some
Polypasta
Cut a circle out of Mirostensils, if you want, you can use a paper template.
Place the Microstencil circle between the sheets of polymer clay and press the them over the baking paper.
Cut out a circle using the biggest cutter.
Apply some Polypasta to the edges and press against the black strip. Bake for 20 mins at 130°.
Condition the black clay and run through thesecond thinnest machine setting and texturize with a sponge. Apply some Polypaste on the back of the pendant, place the black sheet on it, cut out.
Press with a sponge and cut the exceeds with a scalpel. Bake for 30 mins at 130°
Drill a hole using a hand drill and thread the piece.
I hope you will enjoy it!
LC MICRO STENCILS LC Microstencils are thin patterns made of heat-resistant cardboard which you can integrate into 3D project, you can draw on it a simple color plan using LC GLASSYMER, fill the empty gaps with different colors. These stencils are heat-resistant and were designed for a very efficient, yet simple decorating of polymer clay. FEATURES: • Heat-resistant • Patterns can be cured in an oven with polymer clay. • Can be used only once (integrated into a project) or reused several times times. • May be rolled, cut, glued, painted, backed. • Dozens of different patterns available for every taste.
• Can be used in dozens of different projects - from making impressions and backfilling to creating complex 3D pieces with stained glass technique. • Material: Heat resistant cardboard. Paper pattern weight 250g/m2. • Panel size 80 mm (3.12” x 3.12”) Pattern size 35 mm (1.37” x 1.37”)
ORDER NOW: LC STORE - AMAZON