Bernina Accessories Book by Lisa DeKalb

s ie r o s s e c c A A IN N BE R e as id r u o y r o f s n io t lu o S

at a a glance BERNINA Accessories broidery and

ge of sewing, em BERNINA offers a wide ran ropriate brochure youâ&#x20AC;&#x2122;ll find the app quilting accessories. In this idery project. tool for any sewing or embro

A BERNINA 910 930 931 932 933 940 950 1000 1001

1004 1005 1006 1008 1010 1011 1015 1020 1021

1030 1031 1050 1070 1080 1090 1091 1120 1130

1230 1240 1241 1260 1530 1630

B BERNINA activa and 3 Series 125 125 S 135 135 S 145 145 S 210 215 220

230 230PE 240 330 350 350PE 380

C BERNINA virtuosa 150 153 153 QE 155 160 163

D BERNINA aurora

| Co n ten ts

Number

Presser-foot type

Page

Number

Presser-foot type

Zigzag foot

Straight-stitch foot with sliding sole 10

Zigzag foot

with finger guard # 99

Zipper foot with sliding sole

Leather roller foot

1 / 1C / 1D

Reverse pattern foot

2 / 2A

Overlock foot

Open embroidery foot with sliding sole 19

57 / 57D

Patchwork foot with guide

3 / 3C 3A / 3B / 3C

Buttonhole foot

59 / 59C

Double-cord foot (4 – 6mm grooves) 27

Buttonhole foot with slide

60 / 60C

Double-cord foot (7 – 8mm grooves) 27

4 / 4D

Zipper foot

2mm zigzag hemmer

Blindstitch foot

2mm straight-stitch hemmer

Embroidery foot

3mm zigzag hemmer

Tailor-tack foot

4mm straight-stitch hemmer

8 / 8D

Jeans foot

6mm zigzag hemmer

Darning foot

2mm roll and shell hemmer

4mm roll and shell hemmer

Cordonnet foot

4mm lap seam foot

12 / 12C

Bulky overlock foot

8mm lap seam foot

Straight-stitch foot

Adapter shank (standard)

14 / 14D

Zipper foot with guide

Adapter shank (short)

Embroidery foot

Cut ’n’ sew attachment with foot # 90 13

Gathering foot

Eyelet embroidery attachment

Button-sew-on foot

with foot # 92

20 / 20C / 20D Open embroidery foot

Circular embroidery attachment

Braiding foot

Simple binder (24mm)

3-groove cording foot

Ruffler

Appliqué foot

Binder attachment

Free-motion embroidery foot

for pre-folded bias tape

5-groove cording foot

Binder attachment

Embroidery foot (drop-shaped)

for non-pre-folded bias tape

29 / 29C

Quilting foot

Foot for cut ’n’ sew attachment

F1 640

3-groove pintuck foot

Presser foot for eyelet embroidery

F1 B580

5-groove pintuck foot

95 / 95C Binder feet

7-groove pintuck foot

9-groove pintuck foot

BERNINA Stitch Regulator (BSR)

28 32

430 440QE D1 B530 B550QE

E BERNINA artista 165 170 E1 180 E1 185

F BERNINA artista 630

F1 BERNINA aurora 435 450 G BERNINA artista 200 730

H BERNINA 820 830

10 / 10C / 10D Edgestitch foot

Page

34 / 34C / 34D Reverse pattern foot with clear sole

for binder attachments # 87 and # 88 25

Presser-foot set for BERNINA activa

Invisible zipper foot

Presser-foot set

37 / 37D

Patchwork foot

for BERNINA 820 / 830

Piping foot

39 / 39C

Embroidery foot with clear sole

40C

Sideways motion foot

Free-motion couching foot

Snap-on soles

44C

Echo-quilting and cutwork foot

SO 1

Reverse pattern sole 5.5mm

46C

Pintuck and decorative-stitch foot

SO 2

Overlock sole

with clear sole

SO 3

Buttonhole sole 5.5mm

Spanish hemstitch equipment

SO 4

Zipper sole

Three-sole walking foot

SO 5

Blindstitch sole plus adapter

with seam guide

SO 8

Jeans foot sole

Roller foot

SO 20

Open embroidery foot sole 5.5mm 19

52 / 52C / 52D Zigzag foot with sliding sole

SO 37

Patchwork foot sole

8 8

9 10 28

| Co n ten ts

Chapter 1 Presser feet for general sewing

Zigzag foot # 0

Cordonnet foot # 11

Zigzag foot with finger guard # 99

Bulky overlock foot # 12 / 12C

Zigzag foot with sliding sole # 52 / 52C / 52D

Braiding foot # 21

Overlock foot # 2 / 2A

3-groove cording foot # 22

Reverse pattern foot # 1 / 1C / 1D

5-groove cording foot # 25

Reverse pattern foot with clear sole # 34 / 34C / 34D

Spanish hemstitch equipment # 47

Blindstitch foot # 5

3-groove pintuck foot # 30

Edgestitch foot # 10 / 10C / 10D

5-groove pintuck foot # 31

Jeans foot # 8 / 8D

7-groove pintuck foot # 32

Straight-stitch foot # 13

9-groove pintuck foot # 33

Straight-stitch foot # 53 with sliding sole

Pintuck and decorative-stitch foot with clear sole # 46C

Gathering foot # 16

Binder attachment # 88 for non-pre-folded bias tape

Ruffler # 86

Simple binder # 85 (24mm)

Zipper foot # 4 / 4D

Binder attachment # 87 for pre-folded bias tape

Zipper foot # 54 with sliding sole

Binder feet # 95 / 95C for binder attachments # 87

Zipper foot # 14 / 14D with guide

and # 88

Invisible zipper foot # 35

Appliqué foot # 23

Cut ‘n’ sew attachment # 80 with foot # 90

Roller foot # 51

Foot for cut ‘n’ sew attachment # 90

Leather roller foot # 55

Buttonhole foot # 3 / 3C

Piping foot # 38

Buttonhole foot with slide # 3A / 3B / 3C

Free-motion couching foot # 43

Button-sew-on foot # 18

4–6mm double-cord foot # 59 / # 59C

2mm straight-stitch hemmer # 62

7–8mm double-cord foot # 60 / # 60C

4mm straight-stitch hemmer # 64

Patchwork foot # 37 / # 37D

2mm zigzag hemmer # 61

Patchwork foot with guide # 57 / # 57D

3mm zigzag hemmer # 63

BERNINA Stitch Regulator (BSR)

6mm zigzag hemmer # 66

Quilting foot # 29 / # 29C

2mm roll and shell hemmer # 68

Echo-quilting and cutwork foot # 44C

4mm roll and shell hemmer # 69

Three-sole walking foot # 50 with seam guide

4mm lap seam foot # 70

Embroidery foot with clear sole # 39 / # 39C

8mm lap seam foot # 71

Darning foot # 9

Embroidery foot # 6

Embroidery foot # 15

Open embroidery foot # 20 / 20C / 20D

Free-motion embroidery foot # 24

Open embroidery foot with sliding sole # 56

Embroidery foot # 26 (drop-shaped)

Sideways motion foot # 40C

Presser-foot set for BERNINA activa and 3 Series

Tailor-tack foot # 7

Presser-foot set for BERNINA 820 / 830

| Co n ten ts

Adapter shank # 75 (standard)

Guide eyelet for metallic and silk thread

Adapter shank # 77 (short)

Start / stop unit

Snap-on shank

Magnifying lens set (complete)

Straight-stitch plate

CFL sewing light

9mm stitch plate with narrow needle opening (5.5mm)

Thread-lubrication unit

Bobbin cases

Needle-punch tool for CB-hook machines

Eyelet embroidery attachment # 82 with foot # 92

5.5mm stitch plate for needle-punch tool 45

Presser foot for eyelet embroidery # 92

Needle-punch tool for rotary-hook machines

Patchwork seam guide

9mm stitch plate for needle-punch tool

Right- or left-handed seam guide

Needle-punch tool and lens set mounting

Seam guide with rulers

Multiple spool holder

Fabric-feeding aid for sewing buttonholes

Multiple-spool-holder supplement

Height-compensation plates for buttonholes

BERNINA USB Stick

Circular embroidery attachment # 83

Touchscreen pen with holder

Free-arm extension table

Sewing-machine bag

Seam guide for free-arm extension table

Embroidery-module bag

Free-arm extension table

Hard machine cover

Seam guide for free-arm extension table

Suitcase system for sewing machine

Clear acrylic sewing/quilting extension table

Embroidery-module suitcase for suitcase system

Clear acrylic embroidery-module extension table

Suitcase trolley for all sewing machines

Buttonhole cutter with wooden block

BERNINA Swiss Sew Essential Tool

Free-Hand System (FHS) / Presser-foot lifter

Promotion Tool

Free-Hand System (FHS) / Presser-foot lifter retrofit kit

Nostalgic decorative tins

Hosiery darning hoop

‘From Tassels to Textures’ CD and book

Round embroidery hoops

Needle assortment

‘Hoop ‘N’ Buddyz’ embroidery hoop

Small embroidery hoop

Chapter 2 Special sewing accessories

Chapter 3

(for normal use/free-arm embroidery)

Adapter for free-arm embroidery (for use with small hoop) 58

Medium hoop

Adapter set for free-arm embroidery

Large hoop

(for use with medium and oval hoops)

Large oval hoop

BERNINA design collections

‘Mega Hoop’ embroidery hoop

Trapunto collection vol. 1

‘Jumbo’ embroidery hoop

BERNINA Design Studio

BERNINA Embroidery Software Version 6

Measuring kit

BERNINA CutWork

Pattern portfolio bag

Chapter 4

BERNINA Border Embroidery Set

Personal Design Cards

PC Software

My Label

1300MDC 71

700D 72

1150MDA 71

009DCC 73

Special accessories for embroidery computers

Chapter 5 Overlockers / sergers

800DL 72

Standard presser foot

Coverstitch foot

Multi-purpose foot and guide

Right / left seam guides

Elasticator 77

Deco thread guide

Cording foot

Accessory mount

Blindstitch foot

Chainstitch foot

Hemmer guide

Waste bin

Gathering attachment

Overlocker carrying case

Gathering foot

Chapter 6 Special accessories for overlockers / sergers

Pr e sse r f e e t for ge ne ral se win g

| P resser feet fo r g en era l sew in g

Zigzag foot # 0 This foot is suitable for all utility and decorative stitches with a maximum stitch width of 5.5mm. For straight and zigzag stitching as well as for running stitch, gathering stitch, shell hem, etc.

1 2 3

1 Indentation 2 Needle opening 3 Thread slot

002 598 71 00 A

008 444 72 00 B C D D1 E E1 F F1 G

Zigzag foot with finger guard # 99 Zigzag foot # 99 is the same foot as Zigzag foot # 0, except for the finger guard built in as a special safety feature.

1 Finger guard

032 722 70 00 A

032 711 70 00* A B C D D1 E E1 F F1 G Separate finger guard

008 306 71 01* B C D D1 E E1 F F1 G

* While stocks last

Zigzag foot with sliding sole # 52 / 52C / 52D The non-stick sole of this foot is specially coated to ensure smooth gliding over materials that are ‘tricky’ to work with, such as microfibres, plastics, vinyl, leather, etc.

1 2 3

1 Indentation 2 Needle opening 3 Thread slot

002 586 71 00 A

003 076 71 00 A (1630) with 9mm sliding sole

52 008 477 72 00 B C D D1 E F 52C 008 881 73 00 E1 F1 G with 9mm sliding sole 52D 032 965 70 00 H with 9mm sliding sole

| P resser feet fo r g en era l sew in g

Overlock foot # 2 / 2A The stitches are formed over the pin, providing more thread in each stitch so the edge won’t pucker. The stitch is elastic, making it ideal for seams similar to overlock.

1 2

1 Indentation 2 Pin

002 577 71 00 A

001 694 70 01 A (1630)

032 716 70 00 A B Snap-on

008 446 72 00 B C D D1 E F G

2A 033 330 70 01 E1 F1 G H

Reverse pattern foot # 1 / 1C / 1D The indentation in front of and behind the needle opening allows for forward and reverse stitching. Suitable for various utility and decorative stitches.

1 3 2 1

1 Indentation 2 Thread slot 3 Needle opening

002 576 71 00 A

002 781 70 00 A (1630)

032 707 70 00 A B Snap-on

008 445 72 00 B C D D1 E F

1C 033 202 70 00 E1 F1 G 1D 033 220 70 00 H

| P resser feet fo r g en era l sew in g

Reverse pattern foot with clear sole # 34 / 34C / 34D The transparent sole ensures a good view of the stitching and needle area. This foot is used for forward and reverse utility and decorative stitches.

1 2 1

1 Indentation 2 Needle opening

030 972 70 00 A

030 974 70 00 A (1630)

030 770 70 00 B C D D1 E F

34C 030 769 71 00 E1 F1 G 34D 032 961 70 00 H

Blindstitch foot # 5 Suitable for blindhemming and topstitching. With blindhemming, the stitches catch only very little of the hem fabric, so that they are virtually invisible on the front.

1 Needle opening 5

002 580 72 00 A

032 717 70 00 A B Snap-on

008 449 72 00 B C D D1 E E1 F F1 G

033 222 70 00* H

2 Metal guide

1 2

1 Wrong side of fabric 1

2 Right side of fabric

* While stocks last

Edgestitch foot # 10 / 10C / 10D The guide is a great help when stitching along edges, hems or pleats. Suitable for narrow edge finishes, sewing on lace and ribbon, reinforcing edges, etc.

1 2

1 Indentation 2 Needle opening 3 Metal guide

10 002 585 71 00 A 10 002 966 70 00 A (1630) 10 008 455 72 00 B C D D1 E F 10C 008 877 73 00 E1 F1 G 10D 032 960 70 00 H

| P resser feet fo r g en era l sew in g

Jeans foot # 8 / 8D Especially suitable for straight-stitching over thick seams, as well as on thick, firm materials such as denim, canvas, upholstery, etc.

1 2

1 Indentation 2 Needle opening

002 583 71 00 A

032 994 70 00 A B Snap-on

008 453 72 00 B C D D1 E E1 F F1 G

8D 032 962 70 00 H

Straight-stitch foot # 13 For perfect straight-stitching on all materials. Foot # 53 has a non-stick sole for materials that tend to stick. 1

002 963 71 00* A

008 458 73 00* B C D D1 E E1 F F1 G H

1 Needle opening

* While stocks last

Straight-stitch foot # 53 with sliding sole

002 962 71 00 A

008 478 72 00 B C D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

Gathering foot # 16

16 002 596 71 00 A narrow 16 002 967 70 00 A (1630) wide 16 008 460 72 00 B C D D1 E F narrow

The sole does not lie evenly flat on the feed dog, and therefore feeds the fabric unevenly, causing the desired gathering. The slot on the foot enables a flat piece of fabric to be sewn directly onto the piece being gathered in a single operation. The gathering foot is available in a narrow and a wide version. The latter is for sewing machines with 9mm stitch width, but may also be used with 5.5mm machines. The basting-stitch function lets you create more pleats on thick fabrics. With all fabrics, higher thread tension produces narrower pleats.

1 Needle opening 2 Slot

16 008 879 72 00 E1 F1 G H wide

Ruffler # 86 Although the ruffler looks somewhat complicated, it’s easy to handle. When inserting this attachment, take care that the fork arm comes to rest around the needle screw. The up-and-down movement of the needle causes the ruffler blade to move in and out, taking hold of a bit of the fabric each time and slipping it under the needle.

1 2

1 Pleat density adjustment 2 Pleat depth adjustment 3 Ruffler blade

86 001 944 72 00 A (910–1630) 86 001 944 70 01* A (801–900) 86 008 386 73 00 B C D D1 E E1 F F1 G 86

033 550 70 00 H

* While stocks last

| P resser feet fo r g en era l sew in g

Zipper foot # 4 / 4D Especially suitable for sewing in zips, topstitching edges, and making and sewing welts for pockets. Foot # 54 has a non-stick sole for materials that tend to stick. 1

1 Needle openings

002 579 71 00 A

032 712 70 00 A B Snap-on

008 448 72 00 B C D D1 E E1 F F1 G

4D 033 221 70 00 H

Zipper foot # 54 with sliding sole

54 002 964 71 00 A

54 008 479 73 00 B C D D1 E E1 F F1 G

Zipper foot # 14 / 14D with guide The adjustable guide on the top of the foot makes it much easier to sew zippers in straight and to topstitch edges. 1 2

1 Needle openings 2 Adjustable guide

14 006 388 71 00 A 14 008 459 72 00* B C D D1 E E1 F F1 G 14D 032 964 70 00 H * While stocks last

| P resser feet fo r g en era l sew in g

Invisible zipper foot # 35 This foot lets you insert invisible zippers correctly. Invisible zippers look particularly elegant in garments, home dec and accessories. 2 1

35 030 820 70 00 A

1 Needle opening 2 Groove

35 030 653 70 00 B C D D1 E E1 F F1 G H

Cut ‘n’ sew attachment # 80 with foot # 90 The cutting attachment’s two small, sharp knives trim the edge as the fabric is fed under the presser foot (# 90). The fabric edge is cut, neatened and sewn in a single operation.

1 Metal guide 2 Pin

001 749 72 00 A (1000–1630)

80 008 369 72 00 B C D D1 E E1 F F1 G

Foot for cut ‘n’ sew attachment # 90

032 720 70 00 A

032 719 70 00 B C D D1 E E1 F F1 G

| P resser feet fo r g en era l sew in g

Buttonhole foot # 3 / 3C This presser foot lets you sew corded or plain button holes in any desired length. Can also be used for corded or elastic-corded gathering. 1 2 3

1 Needle opening 2 Thread slot 3 Indentation

002 578 71 00 A

002 767 70 00 A (1630)

032 714 70 00 A B Snap-on

008 447 72 00 B C D D1 E F

3C 033 204 70 00 E1 F1 G H

Buttonhole foot with slide # 3A / 3B / 3C Buttonhole foot with slide # 3B is particularly useful for stitching repeating buttonholes on machines that do not have an automatic buttonhole feature, such as mechanical models and some of the activas. The desired buttonhole length is marked with the aid of the scale on the slide. On most computerized models Foot # 3A or # 3C may be used in conjunction with the ‘quick reverse’ function button on the sewing machine’s head frame to program the marked buttonhole length.

3A 001 250 70 00 A (1130) with sensor 3A 031 250 70 03 A (1230) with sensor 3B 006 686 70 00 A 3C 031 250 70 04 A (1630) with sensor 3A 031 250 70 01 B1 C D D1 E E1 F F1 G H with sensor 3B 031 332 70 00 B2 1 2

135, 135s, 145, 145s, 230, 230 PE, 240, 330, 350, 350 PE, 380 125, 125s, 210, 215, 220

Button-sew-on foot # 18 In addition to buttons, this presser foot can also sew on, hooks, eyelets, rings, and decorations such as sequins or bows.

18 002 959 71 00 A 18 008 461 73 00 B C D D1 E E1 F F1 G 18 033 331 70 00* H * While stocks last

3A / 3C

| P resser feet fo r g en era l sew in g

2mm straight-stitch hemmer # 62 The fabric edge is double-turned and straight-stitched in a single operation, yielding a fine hem. Foot # 62 is for thin, lightweight fabrics; foot # 64, for fabrics up to medium-weight. Lace can be inserted into the hem as it is stitched.

1 2 3

1 Channel 2 Needle opening

002 957 72 00 A

3 Thread slot

008 482 72 00 B C D D1 E E1 F F1 G H

4 Coil

4mm straight-stitch hemmer # 64

002 955 72 00 A

008 484 72 00 B C D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

2mm zigzag hemmer # 61 The hem is sewn with a zigzag stitch. Foot # 61 is for lightweight fabrics, foot # 63 for light- to mediumweight fabrics, and foot # 66 is ideal for mediumweight fabrics. Lace can be inserted into the hem as it is stitched. The wider cut-out in the sole of Foot # 63 makes it particularly suited to sewing gently curved edges, such as the edges of round tablecloths.

1 2 3

1 Channel 2 Needle opening

002 956 71 00 A

3 Thread slot

008 481 72 00 B C D D1 E E1 F F1 G H

4 Coil

3mm zigzag hemmer # 63

002 961 71 00 A

008 483 72 00 B C D D1 E E1 F F1 G H

6mm zigzag hemmer # 66

002 972 71 00 A

008 485 72 00 B C D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

2mm roll and shell hemmer # 68 The fabric edge is turned and stitched in a single operation. Ideal for hemming soft fabrics such as tricot. A scalloped edge is produced when a blindstitch or overcasting stitch is selected.

1 Channel

002 958 71 00 A

2 Needle opening

008 486 72 00 B C D D1 E E1 F F1 G H

3 Coil

4mm roll and shell hemmer # 69

001 129 71 00 A

008 487 72 00 B C D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

4mm lap seam foot # 70 For easy, precise sewing of lapped or flat-felled seams. Since both seam allowances are enclosed and stitched into the seam, it is also suitable for reversible garments. Lapped or jeans seams are especially suitable for straight seams such as side seams and yokes, but can also be used for slightly curved seams. Foot # 70 is suitable for lightweight fabrics, while foot # 71 is suitable for medium-weight fabrics.

1 Channel

002 954 72 00 A

008 488 72 00 B C D D1 E E1 F F1 G H

2 Needle opening

8mm lap seam foot # 71

002 973 72 00 A

008 489 72 00 B C D D1 E E1 F F1 G H

Embroidery foot # 6 This foot is suitable for all satin stitching. The wedgeshaped cutout under the sole allows the foot to ride smoothly over the satin stitches, and is high enough that the sewn stitches are not pressed flat. The short toes are especially helpful when sewing curves.

2 3

The small hole in the centre-front of the foot acts as a guide for couching a narrow cord, elastic thread, or several threads, but can also be used as a visual guide. 6

002 581 71 00 A

008 451 72 00 B C D D1 E E1 F F1 G H

1 Indentation 2 Needle opening 3 Hole for cord

| P resser feet fo r g en era l sew in g

Open embroidery foot # 20 / 20C / 20D The open front of this foot ensures a good view of the fabric and stitches. The wedge-shaped cutout in the sole ensures perfect fabric feed when sewing decorative stitches. Ideal for embroidering with the sewing machine, all sorts of appliqué work, Richelieu and circular embroidery, etc. This foot is also available with a non-stick sole for materials that tend to stick (foot # 56).

1 Indentation 2 Needle opening

002 588 71 00 A

002 806 71 00 A (1630)

033 227 70 00 A B Snap-on

008 462 72 00 B C D D1 E F

20C 033 203 70 00 E1 F1 G 20D 033 151 70 00 H

Open embroidery foot with sliding sole # 56

002 588 71 01 A

008 480 72 00 B C D D1 E E1 F F1 G H

Sideways motion foot # 40C Since the edge of the indentation is slightly bevelled, the stitches can easily pass under the foot in any direction – perfect for sewing sideways-motion patterns.

1 2 1

1 Indentation 2 Needle opening

(1630) 40C 006 058 70 00 A 40C 033 205 70 00 E1 F1 G H

| P resser feet fo r g en era l sew in g

Tailor-tack foot # 7 The ridge causes loops to be formed when the zigzag stitch is used. Especially suitable for tailor-tacking. Further uses: fagotting (imitation hemstitch), fringe- and terrycloth embroidery, etc.

1 Needle opening

002 582 72 00 A

008 452 73 00 B C D D1 E E1 F F1 G H

2 Ridge

Cordonnet foot # 11 The 2-mm-deep groove provides for an even fabric feed when sewing with cordonnet or topstitching thread. This foot is perfect for sewing and topstitching with heavy threads, sewing sashiko patterns, and the like.

1 Groove 2 Needle opening

002 952 71 00 A

008 456 72 00 B C D D1 E E1 F F1 G H

Bulky overlock foot # 12 / 12C For seaming knits and couching thick cords, sequins, wool, yarn, leather strips, etc. The coded foot has a guide hole for couching a narrow cord. It is also used for making and attaching covered cording. Foot # 12C is dual-purpose, as it also has the bevelled cutout feature of Braiding foot # 21.

1 2 3

1 Groove 2 Needle opening 3 Thread slot

002 951 71 00 A

002 968 70 00 A (1630)

008 457 72 00 B C D D1 E F

12C 008 878 73 00 E1 F1 G H

| P resser feet fo r g en era l sew in g

Braiding foot # 21 The bevelled cutout allows precision guiding of cords, narrow flat ribbons, braid, multiple strands of small cords, or yarns up to 3mm in diameter.

2 3

1 Engraved line

21 002 595 71 00 A

2 Needle opening

3 Bevelled cut-out

008 463 72 00 B C D D1 E1 F F1 G H

3-groove cording foot # 22 The grooves allow simultaneous couching of several strands of cording lying side by side, and can accommodate yarns, thin wool, elastic thread, etc.

000 076 71 00 A

008 465 72 00 B C D D1 E E1 F F1 G H

1 Thread slot 2 Grooves

5-groove cording foot # 25

3 Opening for cord 4 Indentation 5 Needle opening

000 069 71 00 A

008 468 72 00 B C D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

Spanish hemstitch equipment # 47 The Spanish hemstitch attachment enables you to join fabric edges at a defined distance (with or without a cord) and create edge finishes with a cord. Use foot # 20 for 5.5mm cord guides, and foot # 20C for 9mm cord guides.

033 809 70 00 B C D D1 E E1 F F1 G H

3-groove pintuck foot # 30 Pintucks give texture to a fabric surface. For thicker medium-weight fabrics, use foot # 30 in combination with a 4mm twin needle. For medium-weight fabrics, use foot # 31 with a 3mm twin needle. Pintucks may be combined with decorative stitches.

1 Groove 2 Needle opening

30 002 589 71 00 A 30

008 470 72 00 B C D E E1 F F1 G H

5-groove pintuck foot # 31

002 590 71 00 A

008 471 72 00 B C D E E1 F F1 G H

| P resser feet fo r g en era l sew in g

7-groove pintuck foot # 32 For light- to medium-weight fabrics, use foot # 32 in combination with a 2mm twin needle. Foot # 33 can be used with a 1 or 1.6mm twin needle for very lightweight fabrics. Pintucks may be combined with decorative stitches.

1 Groove 2 Needle opening

002 591 71 00 A

008 472 72 00 B C D D1 E E1 F F1 G H

9-groove pintuck foot # 33 1

002 592 71 00 A

008 473 72 00 B C D D1 E E1 F F1 G H

Pintuck and decorative-stitch foot with clear sole # 46C This foot was specially developed to make combining decorative stitches with pintucks easier. Pintucks are sewn first, then, in a second step, gorgeous decorative stitches are sewn over or between pintucks using the grooves in the sole as guides.

1 Groove 2 Needle opening

G H 46C 033 308 70 00 E1 F1

| P resser feet fo r g en era l sew in g

Binder attachment # 88 for non-pre-folded bias tape The binder attachment is the ideal help for binding fabric edges with bias tape. For neat and attractive edge finishes for garments, home textiles and needlework projects. Binder foot # 95 must be used with binder attachment # 88, for which it was specially developed.

033 505 70 03 A B C D D1 E E1 F F1 G H 28mm

033 505 70 04 A B C D D1 E E1 F F1 G H 32mm

033 505 70 05 A B C D D1 E E1 F F1 G H 38mm

Simple binder # 85 (24mm) Simple binder # 85 can be used to bind fabric edges with commercially available bias binding. It is used with standard adapter shank # 75.

031 107 70 00 A B C D D1 E E1 F F1 G H 24mm

Binder attachment # 87 for pre-folded bias tape Binder attachment # 87 is intended for binding edges with 13-, 20- or 25-mm-wide pre-folded bias tape. Binder foot # 95 must be used with binder attachment # 87, for which it was specially developed.

033 505 70 02 A B C D D1 E E1 F F1 G H 13mm

033 505 70 00 A B C D D1 E E1 F F1 G H 20mm

033 505 70 01 A B C D D1 E E1 F F1 G H 25mm

| P resser feet fo r g en era l sew in g

Binder feet # 95 / 95C for binder attachments # 87 and # 88 Binder foot # 95 / 95C was specially designed for use with binder attachments # 87 and # 88. When used in conjunction with the binder attachments, this foot produces an attractive bound edge.

1 Needle opening

033 554 70 10 A

95C 033 555 70 10 A (1630) 95

033 554 70 00 B C D D1 E F

95C 033 555 70 00 E1 F1 G H

Appliqué foot # 23 This presser foot is ideal for appliquéing with a narrow satin stitch (up to 2mm) as used particularly frequently for children’s and infants’ clothing as well as in heirloom sewing projects. The cutout in the sole is 2mm wide at the needle opening, and widens toward the back of the foot. This means that densely sewn stitches are fed without a problem, both with straight lines and curves.

1 2

1 Indentation

002 960 72 00 A

008 466 72 00 B C D D1 E E1 F F1 G H

2 Needle opening

| P resser feet fo r g en era l sew in g

Roller foot # 51 The three rollers slide over the fabric, enabling perfect fabric feed. This foot is a great help when sewing leather (especially when topstitching), plastics, velvet, etc.

2 2 1 2

1 Needle opening 2 Rollers

002 953 71 00 A

008 476 72 00 B C D D1 E E1 F F1 G H

Leather roller foot # 55 This presser foot is especially suited to sewing over leather, suede, vinyl and plastics, as well as multiple layers and quilted fabrics. The wheel with profiled tread grips the fabric reliably, making it easy to sew steeply curved lines. The roller foot is also excellent for sewing braiding and cords. Because the roller rolls next to the cord rather than over it, any thickness of cord can be used.

031 304 70 01 A

031 304 70 00 B C D D1 E E1 F F1 G H

Piping foot # 38 The bi-level base of this foot – the right half is higher and doesn’t come into contact with the feed dog – allows smooth sewing over thick layers. Suitable for sewing thick tape and ribbon, braid, bindings, mini-piping, hook-and-loop tape and cords.

1 2 3

1 Raising of the foot 2 Indentation

030 915 70 00 A

031 021 70 00 B C D D1 E E1 F F1 G H

3 Needle opening

| P resser feet fo r g en era l sew in g

Free-motion couching foot # 43 This presser foot allows you to feed cords, ribbons and braid directly under the needle, so that lines and shapes of any sort can be precisely guided and couched.

032 849 70 00 A

031 779 72 00 B C D D1 E E1 F F1 G H

4–6mm double-cord foot # 59 / # 59C For simultaneously sewing on two parallel cords with a diameter of 4–6mm. As an additional option, the double-cord foot can also be used for piping.

59 032 673 70 02 A 59C 032 673 70 00 A (1630) 59

032 370 70 02* B C D D1 E F

59C 032 370 71 00 E1 F1 G H * While stocks last

7–8mm double-cord foot # 60 / # 60C For simultaneously sewing on two parallel cords with a diameter of 7–8mm. As an additional option, the double-cord foot can also be used for piping.

032 673 70 03 A

60C 032 673 70 01 A (1630) 60

032 370 70 03* B C D D1 E F

60C 032 370 71 01 E1 F1 G H * While stocks last

| P resser feet fo r g en era l sew in g

Patchwork foot # 37 / # 37D The outer and inner edges of the foot are 6mm (1⁄4 inch) and 3mm (1⁄8 inch) from the centre needle position, respectively. Developed specially for patchwork, this foot is ideally suited for projects with 1⁄4” (3mm) or 1⁄8” (6mm) seam allowances.

3 3 m mm m

6 mm

6 mm 6 mm

001 127 71 00 A

033 226 70 00 A B Snap-on

008 474 72 00 B C D D1 E E1 F F1 G

37D 033 152 70 00 H

Patchwork foot with guide # 57 / # 57D Patchwork foot # 57 differs from Patchwork foot # 37 in that it has an additional side guide to aid in sewing perfectly straight lines.

032 148 70 00 A

031 577 70 00 B C D D1 E E1 F F1 G

57D 032 963 70 00 H

BERNINA Stitch Regulator (BSR) The BERNINA Stitch Regulator reacts to the movement of the fabric under the foot, controlling the speed of the needle during free-motion sewing (when the feed dog is down). The set stitch length is maintained, irrespective of the movement of the fabric.The result is absolutely even stitch formation. The BERNINA Stitch Regulator can do both straight and zigzag stitching depending on the sewing system used.

031 472 72 01

D D1 F F1 G (730)

6 mm

| P resser feet fo r g en era l sew in g

Quilting foot # 29 / # 29C The vertical spring action presses the quilting foot onto the fabric, preventing the fabric from lifting along with the needle, thus ensuring reliable stitch formation. The transparent sole guarantees a clear view of the quilting area.

001 128 71 00 A

003 297 70 00 A (1630)

008 469 72 00* B C D D1 E F

29C 008 880 73 00 E1 F1 G H * While stocks last

Echo-quilting and cutwork foot # 44C The newly developed echo-quilting & cutwork foot # 44C is ideally suited to echo- and shadow quilting, free-motion quilting, thread painting, and free-motion embroidery with zigzag stitch. What’s more, the best cutting results when using the BERNINA CutWork Tool are achieved with this presser foot.

44C 033 369 70 00 B C D D1 E E1 F F1 G H

Three-sole walking foot # 50 with seam guide The walking foot helps to achieve even fabric feed with very thick or multiple layers of fabric. It is especially suitable for machine-quilting straight lines, and for the accurate sewing together of materials and fabrics that tend to stick or slip.

008 968 72 00 A

008 969 72 00 B C D D1 E E1 F F1 G H

032 913 70 00 A B C D D1 E E1 F F1 G H Separate sole for

edge stitching and in-the-ditch stitching

| P resser feet fo r g en era l sew in g

Embroidery foot with clear sole # 39 / # 39C The transparent sole affords a good view of the working area. The small hole in the centre of the foot acts as a guide for couching a narrow cord. This foot is especially suitable for decorative stitches, satin stitching, appliqués, couching perle yarn, sewing offthe-edge scallops, etc.

031 482 70 00 A

39C 032 860 70 00 A (1630) 39

031 406 70 00 B C D D1 E F

39C 032 171 71 00 E1 F1 G H

Darning foot # 9 The vertical spring action presses the darning foot to the fabric, preventing the fabric from lifting along with the needle, and thereby ensuring reliable stitch formation. This makes for perfect darning, but this foot can also be used for quilting light- to mediumweight fabrics.

1 Needle opening

002 584 71 00 A

008 454 72 00 B C D D1 E E1 F F1 G H

Embroidery foot # 15 The oval presser-foot shape with its slight upwards curve facilitates the movement of embroidery under the presser foot when bulky materials are being sewn.

15 032 708 70 00 D D1 E E1 F F1 G H

1 Needle opening

| P resser feet fo r g en era l sew in g

Free-motion embroidery foot # 24 The vertical spring action presses the free-motion embroidery foot onto the fabric, preventing the fabric from lifting along with the needle, and thereby ensuring reliable stitch formation. Ideal for free-motion machine embroidery with an unimpeded view of the embroidering area, e.g. for free-motion and monogram embroidery, silk-ribbon embroidery and quilting projects. 24

002 593 71 00 A

008 467 72 00 B C D D1 E E1 F F1 G H

1 Open needle opening

Embroidery foot # 26 (drop-shaped) The drop-shaped needle opening and the shape of the presser-foot sole reduce damage to the upper thread, enabling an attractive embroidery result. Suitable for embroidering with the embroidery module and for darning thin fabrics.

1 Needle opening

001 980 70 00 A

031 597 70 00 D D1 E E1 F F1 G H

| P resser feet fo r g en era l sew in g

Presser-foot set for BERNINA activa and 3 Series This set contains the following 5 presser feet: – Reverse-pattern foot # 1 – Buttonhole foot # 3 – Buttonhole foot with slide # 3B – Zipper foot # 4 – Blindstitch foot # 5

031 662 70 00 B

Presser-foot set for BERNINA 820 / 830

031 662 70 01 H

This set contains the following 5 presser feet: – Jeans foot # 8D – Edgestitch foot # 10D – Open embroidery foot # 20D – Reverse-pattern foot with clear sole # 34D – Dual-feed patchwork foot with guide # 57D

Sp e c ial se win g ac c e sso rie s

| Sp ec ia l sew in g a c c esso ries

Adapter shank # 75 (standard) Adapter shanks # 75 and #77 are needed for attaching various accessories to the machine. Adapter # 75 is used with e.g. for the simple bias binder # 85 and ruffler attachment # 86 (included with ruffler).

032 705 70 00 A

032 702 70 00 B C D D1 E E1 F F1 G H

Adapter shank # 77 (short)

032 713 70 00 A

032 710 70 00 B C D D1 E E1 F F1 G H

Snap-on shank The snap-on shank is needed for attaching snap-on soles to the machine.

032 703 70 00

A (1008)

032 725 70 00 B

| Sp ec ia l sew in g a c c esso ries

Straight-stitch plate When used together with straight-stitch foot # 13 or 53 (with sliding sole), the straight-stitch plate facilitates perfect straight-stitch formation. It is also ideally suited for embroidering.

006 857 70 00 A (1000–1530)

inch

006 857 70 01 A (1000–1530)

003 098 70 00 A (1630)

inch

003 098 70 01 A (1630)

mm/inch 033 339 70 04 B (125–145) mm

033 339 72 00 B (220–380) D D1 F

inch

033 339 70 01* B (220–380) D F

mm/inch 033 339 70 03 C E mm/inch 033 339 70 02 E1 G mm/inch 032 100 71 01 H mm

031 053 71 00 F1

inch

031 053 71 01 F1

mm/inch 033 339 71 13 F1 * While stocks last

9mm stitch plate with narrow needle opening (5.5mm) The 5.5mm stitch plate is used for sewing machines with a max. stitch width of 9mm when working with thin, soft materials, as its narrower needle opening prevents the fabric from being driven into the needle opening. Suitable for all zigzag and decorative stitches up to a stitch width of 5.5mm.

006 216 70 01 A (1630)

mm/inch 033 339 70 11 E1 G mm

033 339 70 10 F1

inch

031 045 70 01 F1

032 100 70 02 H

| Sp ec ia l sew in g a c c esso ries

Bobbin cases

The black-latch bobbin case is used with CB-hook machines for thicker bobbin threads, such as cordonnet and silk ribbon. The gold-latch (rotaryhook) bobbin case is recommended for embroidering with the embroidery module. The chrome-plated bobbin cases are ideal for all usual sewing projects and are vailable for CB (oscillating) and rotary-hook systems.

3 2

1 CB 001 534 78 02 A (910–933/1000–1530) B C D E F

Cordonnet

2 RL 006 068 77 10 A (1000/1000S/1000UP/1001UP/1021/1070/1630) 3 CB 001 534 77 00 A (910–933/1004–1530) B C D D1 E F 4 RL 030 568 73 00 E1 F1 G H

Eyelet embroidery attachment # 82 with foot # 92 Used with presser foot # 92 (included in the set), this device enables you to embroider beautiful decorative and functional eyelets.

001 996 70 00 A (1000–1630)

008 359 72 00 B C D D1 E E1 F F1 G H

Presser foot for eyelet embroidery # 92 Presser foot # 92 (for eyelet embroidery attachment # 82) is also available separately.

032 724 70 00 A

032 718 70 00 B C D D1 E E1 F F1 G H

| Sp ec ia l sew in g a c c esso ries

Patchwork seam guide The patchwork seam guide can be adjusted to sit directly at the right edge of the presser foot, or at various distances from it. Ideal for accurate sewing and hemming.

032 706 70 00

A B C D D1 E E1 F F1 G H Set (incl. screw)

330 030 131

A B C D D1 E E1 F F1 G H Screw

Right- or left-handed seam guide Available in two versions for mounting either to the right or left of the needle, the seam guide is the perfect tool for maintaining an even distance between rows of stitching.

001 541 70 00

A B C D D1 E E1 F F1 G H Right-handed

315 397 031

A B C D D1 E E1 F F1 G H Left-handed

Seam guide with rulers The rulers – marked in centimeters and inches – allow for accurate stitching of parallel rows. Two versions of the seam guide, for mounting to either the right or left of the needle, are included.

003 027 70 00

A B C D D1 E E1 F F1 G H Set

| Sp ec ia l sew in g a c c esso ries

Fabric-feeding aid for sewing buttonholes Improves fabric feed when sewing buttonholes in thick, fluffy fabrics.

031 247 70 00 for use with:

3A 031 250 70 01

3B 031 332 70 00

Height-compensation plates for buttonholes The height-compensation plates for buttonholes improve feed when sewing buttonholes in materials of unequal height, e.g. along finished edges.

1 Buttonhole foot with slide 2 Height-compensation plates for buttonholes

003 009 51 00 for use with:

3A 031 250 70 01 wide

3C 031 250 70 04 wide

003 008 51 00 for use with:

3A 001 250 70 00 narrow

3A 031 250 70 03 narrow

Circular embroidery attachment # 83 The circular embroidery attachment in combination with foot # 20 or 6 allows you to sew perfect circles or semicircles of various diameters using utility or decorative stitches or lettering.

83 003 201 70 00 A 83 008 373 71 00 B C D D1 E E1 F F1 G H

| Sp ec ia l sew in g a c c esso ries

Free-arm extension table The free-arm extension table increases the sewing area without impeding fabric feed. The separately available seam guide is for topstitching wide borders.

030 347 50 00

B (125–145)

030 347 51 01

B (220–240)

033 045 70 00

B (330–380)

031 073 51 01 D F F1 033 114 70 00* D F F1 * with quick-release button

Seam guide for free-arm extension table

030 726 70 01

B (125–240)

033 046 70 00

B (330–380) D1

F F1

Free-arm extension table The free-arm extension table increases the sewing area without impeding fabric feed. The separately available seam guide is the perfect tool for top stitching wide borders.

008 868 50 00 C E E1 G 031 846 71 00 H

Seam guide for free-arm extension table

030 726 70 00 C E E1 G 032 527 71 00 H

| Sp ec ia l sew in g a c c esso ries

Clear acrylic sewing/quilting extension table The sewing/quilting extension table is very helpful for supporting large sewing and quilting projects, increasing the work surface and evenly distributing the weight of the project.

030 129 71 01

A (1000â&#x20AC;&#x201C;1630)

030 839 50 00 B 030 129 71 02 C E E1 G 030 129 71 04 D D1 F F1 030 129 71 06 H

Clear acrylic embroidery-module extension table The embroidery-module extension table is very helpful for supporting large embroidery projects, Âincreasing the embroidery area and evenly distributing the weight of the embroidery project.

030 129 71 05 D D1 F F1 030 129 71 03 E E1 G

Buttonhole cutter with wooden block Especially helpful for cutting open buttonholes of any size.

032 580 70 00

A B C D D1 E E1 F F1 G H

| Sp ec ia l sew in g a c c esso ries

Free-Hand System (FHS) / Presser-foot lifter BERNINAâ&#x20AC;&#x2122;s unique Free-Hand System (FHS) lets you raise the presser foot while simultaneously lowering the feed dog via a knee lever. This also increases fabric feed under the foot and protects thin, delicate materials from damage from the feed dog.

001 635 73 00

A B C D D1 E E1 F F1 G Standard

001 635 73 01

A B C D D1 E E1 F F1 G for sewing machine cabinet

001 635 73 02

A B C D E E1 F F1 G Special (short)

001 635 70 04 H Standard

Free-Hand System (FHS) / Presser-foot lifter retrofit kit The retrofit kit is ideal for retrofitting a free-hand system / presser-foot lifter.

030 146 70 00

008 610 71 00

E E1

Hosiery darning hoop The hosiery darning hoop keeps the hooped fabric evenly taut and prevents puckering. The moveable side section allows for free guiding.

001 548 71 03 C E E1 G H 001 548 71 01

A B D D1 F F1

| Sp ec ia l sew in g a c c esso ries

Round embroidery hoops The round embroidery hoop keeps the hooped fabric evenly taut and prevents puckering. For free-motion embroidering, darning, eyelet embroidery, etc. Available in various diameters.

033 219 70 00* 033 219 70 01* 033 219 70 02* 033 219 70 05* 033 219 70 03* 033 219 70 10* 033 219 70 04*

A B C D D1 E E1 F F1 G ∅115 A B C D D1 E E1 F F1 G ∅130 A B C D D1 E E1 F F1 G ∅135 A B C D D1 E E1 F F1 G ∅145 A B C D D1 E E1 F F1 G ∅205

A B C D D1 E E1 F F1 G H ∅205 metal A B C D D1 E E1 F F1 G ∅265

* While stocks last

Guide eyelet for metallic and silk thread As an additional thread guide, this eyelet helps prevent metallic and silk threads from slipping off the spool. It is also ideal for working with two and three threads simultaneously.

008 814 71 00

B C D D1 E E1 F F1 G (200)

Start / stop unit Press a key to start and stop the sewing process and adjust the speed with a slide control. No foot control required.

030 828 70 00

B (125–145S) blue

030 828 71 01

B (215–240) red

| Sp ec ia l sew in g a c c esso ries

Magnifying lens set (complete) The sewing area is magnified according to the lens strength chosen. The set contains three lenses of different strengths and a machine mounting.

008 264 73 00 B C D D1 E E1 F F1 G H

CFL sewing light The best sewing light with superb illumination of the sewing area. This CFL (cool fluorescent light) sewing light is characterized by a very long useful life.

030 753 70 00

B (125–240)

004 992 73 00 C (155+163) E E1 (185) G 030 683 74 00 D F F1

Thread-lubrication unit The use of the thread-lubrication unit is particularly recommended when working with metallic and loosely twisted threads. The silicon fluid greatly improves the friction properties of these threads and guarantees reliable guiding.

031 161 70 00

B C D D1 E E1 F F1 G

| Sp ec ia l sew in g a c c esso ries

Needle-punch tool for CB-hook machines This needle-punch tool can be used on most BERNINA CB-hook sewing machines. Using suitable yarns or loose fibers (roving), you’ll be able to work decorative designs into fabrics. Loden, fulling fabrics and felt are especially suitable materials.

031 571 71 00

B C D D1 E (165–170) F (630) DE/FR

031 571 71 04

B C D D1 E (165–170) F (630) EN

5.5mm stitch plate for needle-punch tool

031 050 70 10

B (220–380) D

030 202 50 10

B (125–145S)

007 874 71 10

F (630)

C (153–163) E (165–170)

| Sp ec ia l sew in g a c c esso ries

Needle-punch tool for rotary-hook machines This needle-punch tool can be used on most BERNINA rotary-hook sewing machines. Using suitable yarns or fibers (roving), youâ&#x20AC;&#x2122;ll be able to work decorative designs into fabrics. Loden, fulling fabrics and felt are especially suitable materials.

033 678 70 00*

E1 F1 G H

9mm stitch plate for needle-punch tool

033 691 70 00

E1 G

033 690 70 00 F1 033 685 70 00 H

Needle-punch tool and lens set mounting Youâ&#x20AC;&#x2DC;ll require this mounting to attach the lens set or needle-punch tool.

033 853 70 00 C E E1 G 033 853 70 01

033 853 70 00 D D1 F F1

| Sp ec ia l sew in g a c c esso ries

Multiple spool holder The multiple spool holder makes it easier to work with several spools of thread in different colors.

008 983 73 00 C D D1 E E1 F F1 G H

Multiple-spool-holder supplement Attach this extension to the side of your multiple spool holder to create even more space for your spools.

008 979 70 00 C D D1 E E1 F F1 G H

BERNINA USB Stick The USB data stick is a handy, portable medium for storing data, embroidery designs and update files.

033 623 70 00

F F1 G H

| Sp ec ia l sew in g a c c esso ries

Touchscreen pen with holder For easy operation of the touchscreen of a sewing or embroidery computer. Make your choice by gently tapping the appropriate selection box with the pen. The pen comes with a holder.

031 047 71 00 E E1 F F1 G 032 868 50 00 H

Sewing-machine bag Keep your sewing machine in tip-top shape while you‘re travelling. The inside compartments of this padded transport bag are ideal for stowing accessories and add-ons.

031 042 50 01 B C D D1 E E1 F F1 G

Embroidery-module bag The embroidery-module bag is lightly padded for safely transporting your machine. Embroidery hoops and accessories can be stowed in the inside compartments.

030 895 50 02 D E E1 F F1 G blue 030 895 50 00* D E E1 F F1 G red * While stocks last

| Sp ec ia l sew in g a c c esso ries

Hard machine cover The hard machine cover protects your machine from dust and dirt. An accessories compartment is included in the cover.

001 898 72 02

A (1000–1050)

001 559 71 07

A (1070–1630)

031 101 71 00 C E E1 G

Suitcase system for sewing machine Transport your sewing and embroidery computer easily and elegantly with this suitcase system with built-in trolley. The suitcase system protects against everyday dust, grime and moisture over short distances.

032 219 70 00 C D D1 E E1 F F1 G

Embroidery-module suitcase for suitcase system

032 221 70 00 D D1 E E1 F F1 G

| Sp ec ia l sew in g a c c esso ries

Suitcase trolley for all sewing machines The suitcase system with built-in trolley protects your sewing machine from dust, grime and moisture.

032 220 70 00

A B C D D1 E E1 F F1 G

BERNINA Swiss Sew Essential Tool BERNINA’s practical pocket sewing tool boasts a wide array of individual gadgets that are a breeze to flip out and back in again. Combining typical BERNINA quality with tried-and-tested WENGER precision, the Swiss Sew Essential Tool consists of 17 superbly crafted individual tools, including a special rotary cutter, awl and hem-measure.

031 586 70 00* * While stocks last

Promotion Tool The BERNINA Promotion Tool offers an array of practical individual gadgets that are a breeze to flip out and back in again. The Promotion Tool is a useful and handy companion when you’re on the go.

031 602 70 00* BERNINA Promotion Tool USA 031 602 70 01* BERNINA Promotion Tool Europe * While stocks last

| Sp ec ia l sew in g a c c esso ries

Nostalgic decorative tins

2009

A must for collectors and fans, the exclusive BERNINA annual collector’s tins have become genuine cult objects. The limited edition spanning the years 2005–2009 will wow you with its hip ‘Swiss-look’ illustrations.

2005

2006

031 757 70 05* Annual Box 2005 031 757 70 06* Annual Box 2006

2007

031 757 70 07* Annual Box 2007 031 757 70 08* Annual Box 2008 031 757 70 09* Annual Box 2009

2008

* While stocks last

‘From Tassels to Textures’ CD and book Louisa Meyer’s ‘From Tassels to Textures’ is a set consisting of a CD with over 70 exclusive embroidery designs – many of them with tassels – a detailed, richly illustrated instruction manual, a thread-color chart, and four patterns.

032 950 70 04* * While stocks last

Needle assortment The needle assortment contains different designs and sizes of needles for all common uses. Ask your specialist dealer for further information.

Sp e c ial ac c e sso rie s for e mb roi de ry c om put e rs

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

Small embroidery hoop (for normal use/free-arm embroidery) For small embroidery designs and free-arm embroidery of closed and tubular items. Embroidery area up to a maximum of 4.0 x 6.0cm. Use the included template for accurate positioning.

008 916 70 00 E E1 (180)

Small embroidery hoop (for normal use/free-arm embroidery) For embroidering small sewing projects with a maximum embroidery area of 5 x 7.2cm. The adapter allows you to embroider closed sewing projects such as sleeves, trouser legs, socks, etc. Use the purple template to position the sewing project accurately without the free-arm adapter, or the red template when using the adapter.

030 869 70 00

D E1 (185) F F1 G H (830)

Medium hoop This hoop is for medium-sized embroidery designs and design combinations. The embroidery area measures 10 x 13cm (maximum). Use the template for accurate positioning of the item to be embroidered.

030 871 70 00

D E1 (185)

F F1 G H (830)

008 915 70 00 E E1 (180)

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

Large hoop The hoop for large embroidery designs and design combinations (max. embroidery area 15.5 x 20cm). Use the template for accurate positioning of the item to be embroidered.

008 914 73 00 E E1 (180)

Large oval hoop The hoop for large embroidery designs and design combinations with an embroidery area of up to 14.5 x 5.5cm. Use the template for accurate positioning of the item to be embroidered.

030 870 72 00

D E1 (185) F F1 G H (830)

â&#x20AC;&#x2DC;Mega Hoopâ&#x20AC;&#x2122; embroidery hoop The hoop for extra-large embroidery designs, large design combinations, and borders. Potential embroidery area (with three possible embroidery positions) up to a maximum of 15 x 40cm.

030 580 73 00

D F F1 G H (830)

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

‘Jumbo’ embroidery hoop The latest BERNINA embroidery hoop holds especially large embroidery designs, design combinations and borders, and boasts a new mechanism that makes hooping and unhooping the fabric a breeze. Maximum embroidery area is 40 x 26cm, which can be embroidered with no need to rotate the hoop. This extra-large hoop was specially designed for the new BERNINA 830.

032 842 70 00 H (830)

‘Hoop ‘N’ Buddyz’ embroidery hoop The fabric to be embroidered is stuck to the hooped adhesive stabilizer. For embroidering caps, as well as for special materials such as velvet. For use with the oval hoop.

031 184 70 00

D E1 (185) F F1 G H (830)

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

Adapter for free-arm embroidery (for use with small hoop) The adapter makes more free space available, and is therefore ideal for embroidering tubular and closed sewing projects such as trouser legs, childrenâ&#x20AC;&#x2122;s T-shirts and bags. The adapter is intended for use with the small embroidery hoop.

008 913 72 00 D E E1 F F1 G

Adapter set for free-arm embroidery (for use with medium and oval hoops) The embroidery-hoop adapter set lets you embroider tubular and closed sewing projects such as trouser legs, childrenâ&#x20AC;&#x2122;s T-shirts and bags without undoing their seams. The adapter set is intended for use with the medium and oval hoops.

033 648 70 00 D E1 (185) F F1 G

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

BERNINA design collections

Vol. 1, Creative Genes 032 383 50 00* CD 032 383 50 01* Card 032 383 50 02* USB

Vol. 2, Linen Closet 032 384 50 00* CD 032 384 50 01* Card 032 384 50 02* USB

Vol. 3, Baltimore Elegance 032 385 50 00* CD 032 385 50 01* Card 032 385 50 02* USB

Vol. 4, Classic Swiss Designs 032 684 70 00* CD 032 684 70 01* Card 032 684 70 02* USB

Vol. 5, Fashion Jewels 032 840 70 00* CD 032 840 70 01* Card 032 840 70 02* USB

Vol. 6, Silk Road Elegance 032 843 70 00* CD 032 843 70 01* Card 032 843 70 02* USB

Vol. 7, Exotic Rainforest 033 183 70 01* Card

Vol. 8, Spirit of Geometry 033 230 70 00* CD

* While stocks last

Lend fresh charm to your clothing and home textiles with the versatile BERNINA Studio Design Collections. Step-by-step descriptions of the embroidery projects shown in the collections ensure the near-effortless success of your individual projects.

| Sp ec ia l a c c esso ries fo r em b ro id ery c o m p u ters

Trapunto collection vol. 1 A traditional technique discovered once again! This technique of Trapunto has its origin in Sicilia (Italy) and it has been known since the 14th century. The traditional way of achieving convex Âeffect that contrasts plastically from the background is by tufting the motifs with fiberfill. Our Trapunto Collection provides the possibility to achieve this effect completely on your embroidery machine; fiberfill wonâ&#x20AC;&#x2122;t be needed anymore.

033 849 70 01 D D1 E E1

BERNINA Design Studio Compile your own personal embroidery-design wish list With the Embroidery Design Studio, your BERNINA dealer offers you a huge range of different embroidery designs: from cute-as-a-button babies to classic lace motifs, ethnic designs and floral ornaments, all the way to modern graphic elements. The selection is virtually limitless. Assemble your own personal set of 10 or 20 designs! Bring your USB media Bring your own USB stick or the exclusive Bernina USB stick into the store. We can download up to 70 designs of your choice per transaction. You can then open them in your embroidery software, burn them to your own CD, or write them to your Magic Card via the Magic Box. Some USB sticks will even connect directly to your machine! If you lose your designs, you can bring the original stick back to your dealer and download the designs again, at no additional charge. Enjoy your designs The embroidery designs can be downloaded in all the usual data formats and embroidered out on almost any sewing and embroidery system. For simple editing steps, you can download the basic software Art Link at www.bernina.com free of charge. www.berninadesignstudio.com

PC So f t wa re

| P C So ftw a re

BERNINA Embroidery Software Version 6 Transform your most creative ideas into unique embroidery designs! New and exclusive – only from BERNINA! The BERNINA Embroidery Software Version 6 contains CorelDRAW® Essentials 4, plus over 500 embroidery motifs. What’s more, it gives you automatic digitizing, new stitch effects, and much more! It’s a cinch to create your own embroidery designs with the new BERNINA Embroidery Software Version 6. DesignerPlus and EditorPlus let you discover the true versatility of embroidery, including a wealth of new effects. Bring older versions of the software up to date with the VT update kit. Design Plus V6 EN 033 251 71 04 D E E1 F F1 G H (830)

DE 033 251 71 01 D E E1 F F1 G H (830)

Editor Plus V6

EN 033 258 71 04 D E E1 F F1 G H (830)

DE 033 258 71 01 D E E1 F F1 G H (830)

Update Kit

EN 033 260 71 04 D E E1 F F1 G H (830)

DE 033 260 71 01 D E E1 F F1 G H (830)

BERNINA Embroidery Software can be used with any embroidery system, not just BERNINA machines.

Quilting Program Design your quilt on your PC: play around with corners, blocks, fabric samples, layouts and embroidery motifs as it takes your fancy, then check out the result in Preview and save it directly to your Custom Block library. (DesignerPlus only)

Artistic View BERNINA Embroidery Software version 6 automatically splits, sequences and adds reference points for perfect positioning of multi-hoop designs. So the size of your hoop won’t limit the size of your embroidery composition – or your creativity!

Monograms Create elegant 1-, 2- or 3-letter monograms with different envelope styles, borders and ornaments. Ideal for personalizing your sewing and embroidery projects.

Automatic Digitizing Turn artwork from a number of popular graphic formats into embroidery with just a simple mouse click. No experience required – it doesn’t get any easier than this!

Freehand Drawing Create without confines using the Freehand Drawing function! Draw lines or a closed shape, then choose the outline stitch or fill stitch with which you’d like to fill that shape.

Design Outline Effects Complete your designs with an automatic outline! Once the design is finished, the automatic Outline Design function offers several stitch options. Simply select your favourite and click – BERNINA Embroidery Software does the rest.

Carving Turn your basic design into stunning embroidery with unique carved stitch effects. Choose from a variety of patterns and simply stamp them into your designs. Watch the software automatically produce the embroidery effect you desire.

Color Wheel Preview your design in a variety of colors simply by clicking on the Color Wheel tool. The BERNINA Embroidery Software will automatically select the ideal color combination, which can be changed to suit your taste. For stitching out, the software also gives the thread manufacturer‘s number for the color in question.

For the detailed overview please refer to the table on the following page.

EDITORPLUS

DesignerPlus

View by Color

NEW or enhanced in v6

•

DesignerPlus

NEW or enhanced in v6

EDITORPLUS

NEW or enhanced in v6

•

EDITORPLUS

| P C So ftw a re

•

Improved Auto-digitizing Tool

•

Automatic Outlines and Borders

•

general features

AUTO digitizing

Windows® XP, Vista™ & 7-Compatible ‘Tips’ with Opening Screens

•

Slow Redraw

Easy-to-Identify Icons

•

Fabric Settings / Fabric Display

•

Magic Wand

•

Show Object Outlines

•

DIGITizing

•

Freehand Embroidery Tools (Embroidery Canvas Mode)

Modeless Object-Properties Dialog Boxes

•

CorelDRAW® Essentials 4 Inside!

•

Save Design as Image

Ready-to-Stitch Designs

•

improve stitch quality

Design Thumbnails and Information in Windows Explorer

•

Auto Underlay

•

Multiple Underlays

USB Dongle HOOPS Hoop Selection

•

Create Your Own Hoops Improved Multi-Hooping Split Design File

•

Manual Digitizing Tools

•

Block Digitizing Tool

•

Shape Tools

•

Start / End Point Positions

•

FORMATs

•

Resequencing Designs

•

Open Designs in Many Formats

•

Simple Stitch Resequencing

•

Save Designs in Many Formats

•

Easily Remove Overlaps

•

Save Designs in the All-New V6 Art Format

•

Pull Compensation

•

other features

•

Threads

•

Thread Chart Management

•

Travel on Edge

•

Magic Box Link

•

Thread Matching

•

Underlay Options

•

PhotoSnap

•

Thread Charts

•

Tie In / Off and Closest Join

•

Portfolio

•

BERNINA Cross Stitch

•

lettering

STItch effects •

•

‘Outline Design’ Effect

•

Printed Worksheet

•

Powerful Lettering Tools

•

Carving / Halo / Morphing Effect

•

Print your ART Canvas

•

Satin, Step, or Fancy Fills for Lettering

•

Pattern Stamp

•

Direct Machine Connect

•

Lettering Overlay Removal

•

Color Blending

•

Support and Service

•

Baseline Options

•

Textured Edge Fill

•

cross stitch

Justification Options

•

Wave Effect

•

Eleven Cross Stitch Styles

•

Elastic Lettering

•

Halo Effect

•

Cross Stitch Orientation

•

Fabric Count Settings

•

Professionally Digitized Pre-Programmed Alphabets

•

Kerning Letters

•

STItch types

Reshape Individual Letters

•

Sculptured Fancy Fill

•

Thread Count

•

Star Stitch

•

Thread Charts

•

Lettering

•

Auto Cross

•

Flood Fill

•

Manual Digitizing Tools

•

Rubber Stamp

•

Polygon Select

•

Change Individual Letter Colors TrueType Fonts

•

Ripple Stitch

Buttonholes

•

Blackwork Run

edit & customize

Fancy Fills

•

Edit and Customize Designs from One Screen

•

Texture Fills

Selection Tool

•

Create Pattern Fills

Break Apart

•

Outline Options

•

Blackwork

•

Auto Select Tool

•

Rotation / Free and Direct Entry

•

Lacework

•

Rotate

•

Group and Ungroup Objects

•

Candlewicking

•

Mirror Image

•

Polygon Select Tool

•

Stem-Stitch and Backstitch

•

Scan Artwork

•

Stitch Edit

•

Stipple Fill

•

Cut, Copy, Paste, Duplicate

•

Eraser

•

Open Cross Stitch Designs in BERNINA Embroidery Software V6.0

•

Quilt Design Program

•

Printable Reference Information

•

Preview Appliqué and Embroidery Placement on your Quilt Blocks

•

Rescale Designs / Free and Direct Entry

•

Reshape Object

•

Cross Stitch Fill

Align Objects

•

Pattern Run

•

Pattern Fills

Mirror Image & Mirror Merge Tools Wreath and Kaleidoscope Tools

•

BERNINA QUILTER

•

MONOGRAMs

Color Wheel

•

Advanced Monogramming

Color Film

•

Create Monogram Borders

Object List

•

APPLIqué

•

Auto Appliqué

•

Extensive Block Library

•

Block Editor

•

Block Layout: Set Individual Block Sizes

Sequence by Selection

•

Rescale Graphics in ART Canvas Mode (was Picture Mode)

•

Partial Appliqué

Zooming on Bitmap Graphic Images

•

Advanced Appliqué

•

artistic design

•

ART Strokes (Art Canvas Mode)

•

Artwork Included

•

Add & Fill Holes Quick Clone

•

view designs

•

• •

•

Sashing Layout

•

Border Layout

•

Mirror Blocks

•

Diamond Block Layout

•

Designs Grouped when Opened

•

Link to Graphics Programs

Grid

•

Supported Graphics Formats

•

Rotate Blocks

•

Defined Drawing Shapes (ART Canvas Mode)

•

Fabric and Color Palettes

•

Design Overview Window

•

Add Text (ART Canvas Mode)

•

Customize Fabric Library

•

Zoom Tools

•

Smart Drawing Tool (ART Canvas Mode)

•

Lock Function for Whole Quilt, Embroidery, Appliqué

•

Show / Hide Stitches

•

Freehand Drawing Tool (ART Canvas Mode)

•

Alignment Tools

•

Copy, Cut and Paste Functions

•

Artistic View

•

| P C So ftw a re

BERNINA CutWork Teach your sewing machine creative cutting! BERNINA CutWork expands sewing, embroidering and quilting by a new dimension: cutting. The CutWork Software and Cutting Tool will help you cut a creative dash in next to no time! At last, machine cutting is also possible for hobby sewers.

CutWork

033 335 71 04 D

E E1 F F1 G H (830)

CutWork needle

033 375 70 00 D

E E1 F F1 G H (830)

CutWork stitch plate

033 339 71 00 D F

CutWork stitch plate

008 865 71 03 E1 G

CutWork stitch plate

033 339 71 13 F1

CutWork stitch plate

032 100 71 01 H (830)

The CutWork Software lets you design the embroidery motifs of your choice on your PC, then cut them out with great precision from up to 15 fabric layers at a time with your BERNINA sewing and embroidery system. To do this, simply insert the patented CutWork Cutting Tool instead of the sewing needle. With CutWork, you’ll whip up divine shapes from a variety of fabrics for home-dec projects, appliqués on garments, or especially beautiful quilt designs. Combine the cut edges in no time flat with embroidery, for elegant, traditional drawn-thread work. Cutting really can be this fun – and elegant! To work with the BERNINA CutWork Tool, you‘ll need the appropriate CutWork stitch plate, as well as the Echo-quilting and CutWork foot # 44C.

Echo-quilting & CutWork foot #44C 033 369 70 00 D D1 E E1 F F1 G H (830)

BERNINA Border Embroidery Set The BERNINA Border Embroidery Set lets you accurately calculate the number of pattern repeats for the required length when working with borders, garments, tablecloths and a wealth of other home textiles. The Border Embroidery Set contains 30 attractive border motifs, all of them Swiss-designed! All of the motifs are suitable for straight borders, while some are also suitable for round and oval borders. Furthermore, the software contains 6 suitable corner motifs so that you can also create perfect rectangular and square borders. The BERNINA Border Embroidery Set is available with or without the BERNINA Mega Hoop. The accompanying training CD contains detailed step-by-step instructions.

Border Embroidery Set with Megahoop

032 572 71 00 * D

F F1 G H (830)

Border Embroidery Set 032 573 70 00* D E E1 F F1 G H (830) * While stocks last

| P C So ftw a re

My Label â&#x20AC;&#x201C; custom-made clothing that reflects your taste, style and creativity! Chic styles can be easily adapted to your personal measurements with the My Label 3D Fashion Pattern Software. Simply select a basic style and alter it by adding stitches, buttons or embroidery designs. Each alteration is instantly shown on the screen. As with a mirror image, My Label shows how the garment looks in real life, on your virtual 3D model that reflects your own figure. The Style Consultant gives tips on choosing the style and fabrics. Detailed instructions explain each sewing procedure step-by-step. Sewing garments has never been so easy! Visit www.berninamylabel.com for further information.

English

032 592 71 00

German

032 592 71 01

USA

032 592 71 04

Russian

032 592 71 18

Measuring kit The measuring kit makes measuring easier for you in so many respects. Detailed explanations and accessories such as tape measure, marker, angle measure, and much more, make measuring both easy and enjoyable.

English

032 734 70 04 B C D E F G H

German

032 734 70 01 B C D E F G H

| P C So ftw a re

Pattern portfolio bag For stowing patterns tidily and transporting them safely. This folder will help you keep track of things. The portfolio bag has a number of pockets for storing your patterns or other documents. A superb accessory for the hobby sewer.

032 794 70 00 B C D E F G H

Personal Design Cards Personal Design Cards are blank memory cards for storing embroidery designs or combinations of embroidery designs.

008 896 70 01* E E1 008 896 70 75* G * While stocks last

Ov e rlo c k e rs/se rge rs

| Ov erlo c kers / serg ers

1300MDC Creative ease for even more sewing pleasure The BERNINA 1300MDC makes creative sewing easier than ever before! Let yourself be inspired by this overlocker’s wide range of stitches, and enjoy the wealth of deluxe features that make sewing an even greater pleasure – particularly the patended mtc micro thread control for fine-tuning of the over-edge thread length, the cover stitch and the 5-thread safety stitch.

1150MDA State-of-the-art technology that will inspire you Impressive creative potential, fast sewing speeds and a wide range of uses – you’ll be thrilled by the skills of the BERNINA 1150! This overlocker not only lets you sew perfect garments and home textiles, but is also suitable for quilting. The patented mtc micro thread control makes it easier than ever before to get flawless seams that can also be worn decoratively on the outside of the garment.

| Ov erlo c kers / serg ers

800DL The powerful compact class The BERNINA 800DL provides you with straightforward and affordable access to the fascinating world of overlocking. Versatile, practical features such as the sliders for adjusting the thread tension make this machine especially easy to use, and let you precisionsew to a professional-quality standard – on all types of fabric and in a wide variety of techniques.

700D Everything a beginner could want The small-but-beautiful BERNINA 700D gives you the results you’ve always dreamed of in next to no time. Its ease of use and versatility let you sew with more speed and less effort – narrow and hard-wearing seams, as well as the flawless sewing of stretch and woven fabrics, decorative rolled hems, gathering, and the sewing on of elastic.

| Ov erlo c kers / serg ers

009DCC The ideal partner: cover & chain

800DL •

•

3-thread coverstitch, wide (5.0mm)

•

Colour-coded threading paths

•

2-thread chainstitch seam, Top & Bottom

•

Direct threading (Lay-in system)

•

4-thread overlock seam (with woolly nylon thread built-in safety seam) 3-thread overlock seam, wide 3-thread super-stretch

DELUXE FEATURES AND THREADING TOOLS

•

Automatic tension release when presser foot is lifted Differential-feed and stitch-length setting Safety switch activated when cover is opened

•

3-thread rolled seam

•

Knife drive from above

3-thread rolled hem

•

Front foot lift

3-thread flatlock seam, wide (with decorative thread)

2-thread overlock seam, wide

thread control Overlock seam width

Rolled-hem lever built into stitch plate

•

2-thread flatlock seam, wide (with decor. thread)

•

Combination presser foot with tape guide

2-thread rolled hem

•

Overlock presser foot with tape guide

STITCH VARIATIONS

4-thread coverstitch

3-thread coverstitch

2-thread chainstitch seam

5-thread safety seam

4-thread safety seam

4-thread overlock seam with built-in safety seam

3-thread overlock seam

3-thread super-stretch

3-thread flatlock seam

3-thread rolled seam

3-thread rolled hem

2-thread overlock seam

2-thread flatlock seam

2-thread rolled hem

2-thread wrapped edge

(edge-wrapped with woolly nylon thread)

• •

•

right

left

right

•

3–9mm

3–7mm

•

6+2mm

5+2mm

•

TECHNICAL FEATURES

•

(with woolly nylon thread)

009DCC

1150MDA •

Swing-out presser foot

STITCH

700D

1300MDC •

•

009DCC

Lower-looper and chain-looper auto-threader

4-thread coverstitch, wide (5.0mm)

700D

•

800DL

5-thread safety seam, wide

1300MDC

1150MDA

Already have an overlocker or sewing machine, but want to be able to do cover- and chainstitch as well? No problem. The BERNINA FunLock 009DCC is the ideal partner to give the crowning finish to textiles and garments you’ve sewn yourself!

5+2mm

STANDARD & OPTIONAL ACCESSORIES

• •

Standard overlock presser foot

•

Blindstitch foot

•

opt.

Elasticator foot

•

opt.

Compensating foot for perfect coverstitching

•

Waste collector for excess fabric

•

opt.

Upper-looper converter

•

opt.

Tools and accessories in separate bag

•

Sp e c ial ac c e sso rie s for ove rlo c k e rs/se rge rs

A BERNINA 009DCC

BERNINA 700D BERNINA 800DL BERNINA 870D BERNINA 880DL

C BERNINA 1100D BERNINA 1100DA BERNINA 1110D

D BERNINA 1000DA BERNINA 1200DA BERNINA 1300DC

E BERNINA 1150MDA BERNINA 1200MDA BERNINA 1300MDC

F BERNINA 2500DCE BERNINA 2500DCET

| Sp ec ia l a c c esso ries fo r o v erlo c kers / serg ers

Standard presser foot Trims and neatens the fabric edge in a single operation. The standard presser foot can be used for most overlocking work.

50 20 10.60.01

50 20 10.54.53 C 50 20 10.65.51 D1 E2 50 20 10.70.20 D (1300DC) E (1300MDC) 50 20 10.55.99 F (2500DCE) 50 20 10.59.20 F (2500DCET) 1

Except 1300 DC

Except 1300 MDC

Multi-purpose foot and guide The guide groove and open guide channel are useful for feeding strung beads and sequins as well as cording. For couching strung beads and sequins, and making and attaching covered cording.

2 1

1 Guide groove 2 Open guide channel

50 20 10.64.62 B C D E F Foot 50 20 10.64.61 B1 C D F Foot with guide 50 20 10.70.96 E Foot with guide 50 20 10.07.72 B1 C1 D F Guide 50 20 10.71.00 E Guide 1

With accessory mount 50 20 10.54.11 only

Elasticator The elasticator guides and stretches elastic while it is being stitched on. Ideal for lingerie, swim-, sportsand dancewear, home textiles, etc.

50 20 10.64.59

B C D E F

| Sp ec ia l a c c esso ries fo r o v erlo c kers / serg ers

Cording foot The cording foot is useful for sewing on thin cords, wire, fishline, perle yarn or fine yarn with a rolled-hem stitch. Ideal for reinforced edges, stand-up ruffles or shapeable bows.

50 20 10.64.60

B C D E F

Blindstitch foot The blindstitch foot has an adjustable guide plate on the side that makes it easier to stitch blind hems. Suitable for blindhemming, flatlocking and heirloom techniques.

1â&#x20AC;&#x201A; Guide plate

50 20 10.64.58

B C D E F

Hemmer guide The hemmer guide ensures even, parallel feeding of pre-folded fabric. Ideal for coverstitch-hemming stretch fabrics such as jersey, tricot, etc.

50 20 10.68.87

A D (1300DC) E (1300MDC)

| Sp ec ia l a c c esso ries fo r o v erlo c kers / serg ers

Gathering attachment The tab on the attachment separates the two layers of fabric. The bottom layer is gathered while the top layer remains smooth. Lets you simply gather a length of fabric, or gather while attaching to a flat piece of fabric.

1â&#x20AC;&#x201A; Tab

50 20 10.64.67

B1 C D F

50 20 10.70.95

With accessory mount 50 20 10.54.11 only

Gathering foot The fabric to be gathered passes under the gathering attachment, while the fabric layer that remains smooth travels over the attachment. Differential feed means the fabric is gathered at the same time as it is sewn onto the flat piece of fabric.

50 20 10.68.82

A B C D E F

Coverstitch foot When using the coverstitch, the knife guard is removed and replaced with the coverstitch extension plate. For seaming, hemming, binding and decorative stitching. 1

1â&#x20AC;&#x201A; Spring-borne side parts

50 20 10.52.16

50 20 10.70.38 D (1300DC) E (1300MDC) 50 20 10.59.39 F

| Sp ec ia l a c c esso ries fo r o v erlo c kers / serg ers

Right / left seam guides The right seam guide helps to guide the fabric, and ensures precise seam allowances. The left seam guide is ideal for sewing parallel coverstitch and chainstitch lines.

50 20 10.06.81 50 20 10.65.99

A B C D E F left B1 C D F right

50 20 10.70.97 E right 1

With accessory mount 50 20 10.54.11 only

Deco thread guide The deco thread guide is used when overlocking thick, strong threads. Ideal for overlocking decorative threads, yarns and cords.

50 20 10.61.69 F

Accessory mount The accessory mount is essential for attaching some overlocker / serger accessories to the Funlock, 300 Series, 700D and 800D/DL models.

50 20 10.54.11

A B C

| Sp ec ia l a c c esso ries fo r o v erlo c kers / serg ers

Chainstitch foot The chainstitch foot facilitates fabric feed while chainstitching.

50 20 10.52.41 A

Waste bin Clicking the waste bin onto the looper cover is simplicity itself, and guarantees a tidy sewing table at all times.

50 20 10.66.88

Overlocker carrying case Keep your overlocker properly protected while travelling so that it stays in top-notch condition.

50 20 10.72.00

A B C D E

t Amendments of the produc available in every country. are ts par ory ess ice. acc not the r Not all of of change without prio single articles are subjects range and the function of r BERNINA dealer. www.bernina.com or at you at tion rma info re mo Please find