HOW TO INSTALL PLUGIN UNDERCABINET LIGHTS
STEP 1. Plan the Layout
Mark the area where installation has to be done. Preferred areas Kitchen cabinets, Closet, and showcase. Screw-in the fixtures Drill holes through any under hangs between cabinets.
STEP 2.
Connect the Black wire with a wire
Run the cords
Place the Puck Light cord from one fixture to another until they’re all connected. Use a pressure connector to keep the cords intact. Wire the fixture Black wire Use your wire stripper to strip about 3/4 of insulation off the wires. Connect the black wire with a wire on the Puck Light and another wire connecting to the next fixture. Use wire nuts to connect wires, then secure them with electrical tape. Magnetic LED Puck Light :
STEP 3. Flip the switch
Back plate
LED Puck Light Magnetic plate
1
Wire
2
Reassemble and switch on the lighting fixture. You can skip steps Run the cords & Wire the fixture if you have a direct connector, Magnetic LED Puck Light.
MAX.20
LED Under Cabinet Lights are good for use in other areas as well such as in closets, cabinets etc. Also known as Kitchen cabinet lighting,