Kiddie’s C hair
Assembly Instructions Neat design allows 2 chairs to flip-and-stack Chair is sized to fit our Kiddie’s Desk design
CUT LIST Chair back Chair front Top and bottom Bottom strips
250 mm
250 mm
250 mm
500 mm
SupaWood 16 mm 1 x 500 mm x 250 mm 1 x 218 mm x 250 mm 2 x 250 mm x 250 mm 2 x 50 mm x 250 mm
YOU WILL ALSO NEED 35 mm chipboard screws Wood glue Wood filler Paint
Your Project Partner
www.timbercity.co.za
Step 1 Join the top (250 mm x 250 mm) x 1 and bottom of the chair (250 mm x 250 mm) x 1 to the front (218 mm x 250 mm) x 1. First drill pilot holes for the screws, then countersink them, before applying wood glue and fastening the pieces together with screws.
Step 2 You are now ready to join the back of the chair (500 mm x 250 mm) x 1 to the U shape you created in step 1. Again drill pilot holes, then countersink them, before applying wood glue and fastening the pieces together with screws.
Step 3 Now join the two bottom strips (50 mm x 250 mm) x 2 to the bottom of the chair. Position them about 10 mm in from the back and front of the chair. Drill pilot holes, countersink them, apply wood glue and fasten with screws. Finally, fill the screw holes with wood filler, allow to dry, then paint your chair in the colour of your choice.
Your Project Partner
www.timbercity.co.za