Toy Box Assembly Instructions Adorable, neat storage units
40
6m
m
CUT LIST Shutterply 21 mm
424 mm
Sides Front Back Base Lid
600
mm
2 x 382 x 364 mm 1 x 382 x 600 mm 1 x 382 x 600 mm 1 x 600 x 406 mm 1 x 600 x 406 mm
YOU WILL ALSO NEED Chipboard screws Wood glue Castors Handles Strut Wood filler
Your Project Partner
www.timbercity.co.za
Step 1 Connect the sides (382 x 364 mm) x 2 to the front (382 x 600 mm) and back (382 x 600 mm). Start by drilling pilot holes before applying wood glue. Hold the panels in place and secure with screws.
Step 2 Turn the box upside down and apply wood glue to contact areas before putting the base (600 x 406 mm) in place. Drill pilot holes and secure with chipboard screws.
Step 3 Recess the lid (600 x 406 mm) and the edge of the back panel. Place and align the hinge to ensure it fits and closes properly. Mark the recess area with a pencil before fastening the hinge to the lid with screws.
Your Project Partner
www.timbercity.co.za
Step 4 Place the lid in the open position. Fasten the other part of the hinge to the recessed area on the back panel. Make adjustments if the lid doesn’t close properly.
Step 5 Fasten the castors to the bottom, and handles to the sides of the toy box with screws. Fill the screw holes with wood filler and leave it to dry before sanding the box to achieve a smooth finish. Now, get the little one involved to help paint/decorate the toy box the way they want it!
Your Project Partner
www.timbercity.co.za