Outdoor Coffee Table
(with shelf storage) Assembly Instructions A stylish, low table with display-capabilities
CUT LIST
1084 mm 506 mm
40
0
1000 mm
Shutterply 21 mm
m
m
Top Legs/Sides Storage Shelf
2 x 1084 x 400 mm 4 x 464 x 400 mm 2 x 1000 x 400 mm
YOU WILL ALSO NEED Chipboard screws Wood glue Wood filler
Your Project Partner
www.timbercity.co.za
Step 1 Prepare the tabletop by fastening the top sheets (1084 x 400 mm) x 2 together. Drill pilot holes, apply wood glue and secure with chipboard screws.
Step 2 Use the side sheets (464 x 400 mm) x 4 and repeat step 1 for the legs of the table.
Step 3 Prepare your storage shelf by fastening the shelves (1000 x 400 mm) x 2 together.
Your Project Partner
www.timbercity.co.za
Step 4 Now that all panels are complete, it’s time to construct the actual table. Fasten the top (1084 x 400 mm) to the legs/ sides (464 x 400 mm). Drill pilot holes, apply wood glue and secure with long chipboard screws.
Step 5 Secure the storage shelf between the legs (1000 x 400 mm). Make sure the shelf is level and at the desired height before drilling pilot holes, applying wood glue and fastening with screws. The shelf will also act as a support for the legs and will strengthen the structure of the table. Fill the screw holes with wood filler and leave it to dry before sanding the table to achieve a smooth finish. Now your coffee table just needs an exterior coating, then it will be complete!
Your Project Partner
www.timbercity.co.za